Merge branch 'linus' into x86/cleanups

230 files changed, 23348 insertions, 4855 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index a280ab3d083..2735bde7347 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/
 obj-$(CONFIG_PARIDE) 		+= block/paride/
 obj-$(CONFIG_TC)		+= tc/
 obj-$(CONFIG_USB)		+= usb/
+obj-$(CONFIG_USB_MUSB_HDRC)	+= usb/musb/
 obj-$(CONFIG_PCI)		+= usb/
 obj-$(CONFIG_USB_GADGET)	+= usb/gadget/
 obj-$(CONFIG_SERIO)		+= input/serio/
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index bb7c51f712b..7d2edf143f1 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -563,9 +563,6 @@ EXPORT_SYMBOL_GPL(unregister_hotplug_dock_device);
  */
 static int handle_eject_request(struct dock_station *ds, u32 event)
 {
-	if (!dock_present(ds))
-		return -ENODEV;
-
 	if (dock_in_progress(ds))
 		return -EBUSY;
 
@@ -573,8 +570,16 @@ static int handle_eject_request(struct dock_station *ds, u32 event)
 	 * here we need to generate the undock
 	 * event prior to actually doing the undock
 	 * so that the device struct still exists.
+	 * Also, even send the dock event if the
+	 * device is not present anymore
 	 */
 	dock_event(ds, event, UNDOCK_EVENT);
+
+	if (!dock_present(ds)) {
+		complete_undock(ds);
+		return -ENODEV;
+	}
+
 	hotplug_dock_devices(ds, ACPI_NOTIFY_EJECT_REQUEST);
 	undock(ds);
 	eject_dock(ds);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 5622aee996b..13593f9f219 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -110,6 +110,31 @@ static struct acpi_ec {
 	u8 handlers_installed;
 } *boot_ec, *first_ec;
 
+/* 
+ * Some Asus system have exchanged ECDT data/command IO addresses.
+ */
+static int print_ecdt_error(const struct dmi_system_id *id)
+{
+	printk(KERN_NOTICE PREFIX "%s detected - "
+		"ECDT has exchanged control/data I/O address\n",
+		id->ident);
+	return 0;
+}
+
+static struct dmi_system_id __cpuinitdata ec_dmi_table[] = {
+	{
+	print_ecdt_error, "Asus L4R", {
+	DMI_MATCH(DMI_BIOS_VERSION, "1008.006"),
+	DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),
+	DMI_MATCH(DMI_BOARD_NAME, "L4R") }, NULL},
+	{
+	print_ecdt_error, "Asus M6R", {
+	DMI_MATCH(DMI_BIOS_VERSION, "0207"),
+	DMI_MATCH(DMI_PRODUCT_NAME, "M6R"),
+	DMI_MATCH(DMI_BOARD_NAME, "M6R") }, NULL},
+	{},
+};
+
 /* --------------------------------------------------------------------------
                              Transaction Management
    -------------------------------------------------------------------------- */
@@ -196,6 +221,8 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
 				return 0;
 			msleep(1);
 		}
+		if (acpi_ec_check_status(ec,event))
+			return 0;
 	}
 	pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n",
 		acpi_ec_read_status(ec),
@@ -911,6 +938,15 @@ int __init acpi_ec_ecdt_probe(void)
 		pr_info(PREFIX "EC description table is found, configuring boot EC\n");
 		boot_ec->command_addr = ecdt_ptr->control.address;
 		boot_ec->data_addr = ecdt_ptr->data.address;
+		if (dmi_check_system(ec_dmi_table)) {
+			/*
+			 * If the board falls into ec_dmi_table, it means
+			 * that ECDT table gives the incorrect command/status
+			 * & data I/O address. Just fix it.
+			 */
+			boot_ec->data_addr = ecdt_ptr->control.address;
+			boot_ec->command_addr = ecdt_ptr->data.address;
+		}
 		boot_ec->gpe = ecdt_ptr->gpe;
 		boot_ec->handle = ACPI_ROOT_OBJECT;
 		acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c
index 2a32c843cb4..8892b9824fa 100644
--- a/drivers/acpi/executer/exconfig.c
+++ b/drivers/acpi/executer/exconfig.c
@@ -479,5 +479,8 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle)
 
 	acpi_tb_set_table_loaded_flag(table_index, FALSE);
 
+	/* Table unloaded, remove a reference to the ddb_handle object */
+
+	acpi_ut_remove_reference(ddb_handle);
 	return_ACPI_STATUS(AE_OK);
 }
diff --git a/drivers/acpi/namespace/nsnames.c b/drivers/acpi/namespace/nsnames.c
index 549db42f16c..bd577387800 100644
--- a/drivers/acpi/namespace/nsnames.c
+++ b/drivers/acpi/namespace/nsnames.c
@@ -56,13 +56,14 @@ ACPI_MODULE_NAME("nsnames")
  *              Size            - Size of the pathname
  *              *name_buffer    - Where to return the pathname
  *
- * RETURN:      Places the pathname into the name_buffer, in external format
+ * RETURN:      Status
+ *              Places the pathname into the name_buffer, in external format
  *              (name segments separated by path separators)
  *
  * DESCRIPTION: Generate a full pathaname
  *
  ******************************************************************************/
-void
+acpi_status
 acpi_ns_build_external_path(struct acpi_namespace_node *node,
 			    acpi_size size, char *name_buffer)
 {
@@ -77,7 +78,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 	if (index < ACPI_NAME_SIZE) {
 		name_buffer[0] = AML_ROOT_PREFIX;
 		name_buffer[1] = 0;
-		return;
+		return (AE_OK);
 	}
 
 	/* Store terminator byte, then build name backwards */
@@ -105,11 +106,13 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 
 	if (index != 0) {
 		ACPI_ERROR((AE_INFO,
-			    "Could not construct pathname; index=%X, size=%X, Path=%s",
+			    "Could not construct external pathname; index=%X, size=%X, Path=%s",
 			    (u32) index, (u32) size, &name_buffer[size]));
+
+		return (AE_BAD_PARAMETER);
 	}
 
-	return;
+	return (AE_OK);
 }
 
 #ifdef ACPI_DEBUG_OUTPUT
@@ -129,6 +132,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 
 char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 {
+	acpi_status status;
 	char *name_buffer;
 	acpi_size size;
 
@@ -138,8 +142,7 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 
 	size = acpi_ns_get_pathname_length(node);
 	if (!size) {
-		ACPI_ERROR((AE_INFO, "Invalid node failure"));
-		return_PTR(NULL);
+		return (NULL);
 	}
 
 	/* Allocate a buffer to be returned to caller */
@@ -152,7 +155,11 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
 
 	/* Build the path in the allocated buffer */
 
-	acpi_ns_build_external_path(node, size, name_buffer);
+	status = acpi_ns_build_external_path(node, size, name_buffer);
+	if (ACPI_FAILURE(status)) {
+		return (NULL);
+	}
+
 	return_PTR(name_buffer);
 }
 #endif
@@ -186,7 +193,7 @@ acpi_size acpi_ns_get_pathname_length(struct acpi_namespace_node *node)
 	while (next_node && (next_node != acpi_gbl_root_node)) {
 		if (ACPI_GET_DESCRIPTOR_TYPE(next_node) != ACPI_DESC_TYPE_NAMED) {
 			ACPI_ERROR((AE_INFO,
-				    "Invalid NS Node (%p) while traversing path",
+				    "Invalid Namespace Node (%p) while traversing namespace",
 				    next_node));
 			return 0;
 		}
@@ -234,8 +241,7 @@ acpi_ns_handle_to_pathname(acpi_handle target_handle,
 
 	required_size = acpi_ns_get_pathname_length(node);
 	if (!required_size) {
-		ACPI_ERROR((AE_INFO, "Invalid node failure"));
-		return_ACPI_STATUS(AE_ERROR);
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
 	/* Validate/Allocate/Clear caller buffer */
@@ -247,7 +253,11 @@ acpi_ns_handle_to_pathname(acpi_handle target_handle,
 
 	/* Build the path in the caller buffer */
 
-	acpi_ns_build_external_path(node, required_size, buffer->pointer);
+	status =
+	    acpi_ns_build_external_path(node, required_size, buffer->pointer);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
 
 	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%s [%X]\n",
 			  (char *)buffer->pointer, (u32) required_size));
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 89f3b2abfdc..cf47805a744 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -849,7 +849,7 @@ static int __init acpi_irq_penalty_update(char *str, int used)
 		if (irq < 0)
 			continue;
 
-		if (irq >= ACPI_MAX_IRQS)
+		if (irq >= ARRAY_SIZE(acpi_irq_penalty))
 			continue;
 
 		if (used)
@@ -872,10 +872,12 @@ static int __init acpi_irq_penalty_update(char *str, int used)
  */
 void acpi_penalize_isa_irq(int irq, int active)
 {
-	if (active)
-		acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
-	else
-		acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
+	if (irq >= 0 && irq < ARRAY_SIZE(acpi_irq_penalty)) {
+		if (active)
+			acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
+		else
+			acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
+	}
 }
 
 /*
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index e36422a7122..d3f0a62efcc 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -123,7 +123,7 @@ struct acpi_processor_errata errata __read_mostly;
 static int set_no_mwait(const struct dmi_system_id *id)
 {
 	printk(KERN_NOTICE PREFIX "%s detected - "
-		"disable mwait for CPU C-stetes\n", id->ident);
+		"disabling mwait for CPU C-states\n", id->ident);
 	idle_nomwait = 1;
 	return 0;
 }
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 283c08f5f4d..cf5b1b7b684 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -41,7 +41,6 @@
 #include <linux/pm_qos_params.h>
 #include <linux/clockchips.h>
 #include <linux/cpuidle.h>
-#include <linux/cpuidle.h>
 
 /*
  * Include the apic definitions for x86 to have the APIC timer related defines
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 0133af49cf0..80e32093e97 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -70,7 +70,7 @@ static DEFINE_MUTEX(performance_mutex);
  *  0 -> cpufreq low level drivers initialized -> consider _PPC values
  *  1 -> ignore _PPC totally -> forced by user through boot param
  */
-static unsigned int ignore_ppc = -1;
+static int ignore_ppc = -1;
 module_param(ignore_ppc, uint, 0644);
 MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
 		 "limited by BIOS, this should help");
diff --git a/drivers/acpi/resources/rscalc.c b/drivers/acpi/resources/rscalc.c
index f61ebc679e6..d9063ea414e 100644
--- a/drivers/acpi/resources/rscalc.c
+++ b/drivers/acpi/resources/rscalc.c
@@ -587,6 +587,9 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
 			} else {
 				temp_size_needed +=
 				    acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
+				if (!temp_size_needed) {
+					return_ACPI_STATUS(AE_BAD_PARAMETER);
+				}
 			}
 		} else {
 			/*
diff --git a/drivers/acpi/utilities/utalloc.c b/drivers/acpi/utilities/utalloc.c
index e7bf34a7b1d..7dcb67e0b21 100644
--- a/drivers/acpi/utilities/utalloc.c
+++ b/drivers/acpi/utilities/utalloc.c
@@ -242,10 +242,12 @@ acpi_ut_initialize_buffer(struct acpi_buffer * buffer,
 {
 	acpi_status status = AE_OK;
 
-	if (!required_length) {
-		WARN_ON(1);
-		return AE_ERROR;
+	/* Parameter validation */
+
+	if (!buffer || !required_length) {
+		return (AE_BAD_PARAMETER);
 	}
+
 	switch (buffer->length) {
 	case ACPI_NO_BUFFER:
 
diff --git a/drivers/acpi/utilities/utdelete.c b/drivers/acpi/utilities/utdelete.c
index c5c791a575c..42609d3a8aa 100644
--- a/drivers/acpi/utilities/utdelete.c
+++ b/drivers/acpi/utilities/utdelete.c
@@ -135,6 +135,10 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
 		obj_pointer = object->package.elements;
 		break;
 
+		/*
+		 * These objects have a possible list of notify handlers.
+		 * Device object also may have a GPE block.
+		 */
 	case ACPI_TYPE_DEVICE:
 
 		if (object->device.gpe_block) {
@@ -142,9 +146,14 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
 						       gpe_block);
 		}
 
-		/* Walk the handler list for this device */
+		/*lint -fallthrough */
+
+	case ACPI_TYPE_PROCESSOR:
+	case ACPI_TYPE_THERMAL:
+
+		/* Walk the notify handler list for this object */
 
-		handler_desc = object->device.handler;
+		handler_desc = object->common_notify.handler;
 		while (handler_desc) {
 			next_desc = handler_desc->address_space.next;
 			acpi_ut_remove_reference(handler_desc);
diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c
index e25484495e6..916eff399eb 100644
--- a/drivers/acpi/utilities/utobject.c
+++ b/drivers/acpi/utilities/utobject.c
@@ -425,6 +425,7 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object,
 			       acpi_size * obj_length)
 {
 	acpi_size length;
+	acpi_size size;
 	acpi_status status = AE_OK;
 
 	ACPI_FUNCTION_TRACE_PTR(ut_get_simple_object_size, internal_object);
@@ -484,10 +485,14 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object,
 			 * Get the actual length of the full pathname to this object.
 			 * The reference will be converted to the pathname to the object
 			 */
-			length +=
-			    ACPI_ROUND_UP_TO_NATIVE_WORD
-			    (acpi_ns_get_pathname_length
-			     (internal_object->reference.node));
+			size =
+			    acpi_ns_get_pathname_length(internal_object->
+							reference.node);
+			if (!size) {
+				return_ACPI_STATUS(AE_BAD_PARAMETER);
+			}
+
+			length += ACPI_ROUND_UP_TO_NATIVE_WORD(size);
 			break;
 
 		default:
diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c
index c33b1c6e93b..cfe2c833474 100644
--- a/drivers/acpi/wmi.c
+++ b/drivers/acpi/wmi.c
@@ -347,7 +347,7 @@ struct acpi_buffer *out)
 	strcpy(method, "WQ");
 	strncat(method, block->object_id, 2);
 
-	status = acpi_evaluate_object(handle, method, NULL, out);
+	status = acpi_evaluate_object(handle, method, &input, out);
 
 	/*
 	 * If ACPI_WMI_EXPENSIVE, call the relevant WCxx method, even if
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index d9d1b65d206..74031de517e 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -408,7 +408,6 @@ int register_cdrom(struct cdrom_device_info *cdi)
 	ENSURE(get_last_session, CDC_MULTI_SESSION);
 	ENSURE(get_mcn, CDC_MCN);
 	ENSURE(reset, CDC_RESET);
-	ENSURE(audio_ioctl, CDC_PLAY_AUDIO);
 	ENSURE(generic_packet, CDC_GENERIC_PACKET);
 	cdi->mc_flags = 0;
 	cdo->n_minors = 0;
@@ -2506,8 +2505,6 @@ static int cdrom_ioctl_get_subchnl(struct cdrom_device_info *cdi,
 
 	/* cdinfo(CD_DO_IOCTL,"entering CDROMSUBCHNL\n");*/
 
-	if (!CDROM_CAN(CDC_PLAY_AUDIO))
-		return -ENOSYS;
 	if (copy_from_user(&q, argp, sizeof(q)))
 		return -EFAULT;
 
@@ -2538,8 +2535,6 @@ static int cdrom_ioctl_read_tochdr(struct cdrom_device_info *cdi,
 
 	/* cdinfo(CD_DO_IOCTL, "entering CDROMREADTOCHDR\n"); */
 
-	if (!CDROM_CAN(CDC_PLAY_AUDIO))
-		return -ENOSYS;
 	if (copy_from_user(&header, argp, sizeof(header)))
 		return -EFAULT;
 
@@ -2562,8 +2557,6 @@ static int cdrom_ioctl_read_tocentry(struct cdrom_device_info *cdi,
 
 	/* cdinfo(CD_DO_IOCTL, "entering CDROMREADTOCENTRY\n"); */
 
-	if (!CDROM_CAN(CDC_PLAY_AUDIO))
-		return -ENOSYS;
 	if (copy_from_user(&entry, argp, sizeof(entry)))
 		return -EFAULT;
 
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index 1e0455bd6df..1231d95aa69 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -471,6 +471,12 @@ cleanup_sense_final:
 	return err;
 }
 
+static int gdrom_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
+			     void *arg)
+{
+	return -EINVAL;
+}
+
 static struct cdrom_device_ops gdrom_ops = {
 	.open			= gdrom_open,
 	.release		= gdrom_release,
@@ -478,6 +484,7 @@ static struct cdrom_device_ops gdrom_ops = {
 	.media_changed		= gdrom_mediachanged,
 	.get_last_session	= gdrom_get_last_session,
 	.reset			= gdrom_hardreset,
+	.audio_ioctl		= gdrom_audio_ioctl,
 	.capability		= CDC_MULTI_SESSION | CDC_MEDIA_CHANGED |
 				  CDC_RESET | CDC_DRIVE_STATUS | CDC_CD_R,
 	.n_minors		= 1,
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 9d0dfe6e0d6..031e0e1a1a3 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -550,12 +550,19 @@ return_complete:
 	}
 }
 
+static int viocd_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
+			     void *arg)
+{
+	return -EINVAL;
+}
+
 static struct cdrom_device_ops viocd_dops = {
 	.open = viocd_open,
 	.release = viocd_release,
 	.media_changed = viocd_media_changed,
 	.lock_door = viocd_lock_door,
 	.generic_packet = viocd_packet,
+	.audio_ioctl = viocd_audio_ioctl,
 	.capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_GENERIC_PACKET | CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_RAM
 };
 
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index 81e14bea54b..4bada0e8b81 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -148,6 +148,9 @@ struct agp_bridge_data {
 	char minor_version;
 	struct list_head list;
 	u32 apbase_config;
+	/* list of agp_memory mapped to the aperture */
+	struct list_head mapped_list;
+	spinlock_t mapped_lock;
 };
 
 #define KB(x)	((x) * 1024)
diff --git a/drivers/char/agp/ali-agp.c b/drivers/char/agp/ali-agp.c
index 1ffb381130c..31dcd9142d5 100644
--- a/drivers/char/agp/ali-agp.c
+++ b/drivers/char/agp/ali-agp.c
@@ -110,7 +110,8 @@ static int ali_configure(void)
 
 		nlvm_addr+= agp_bridge->gart_bus_addr;
 		nlvm_addr|=(agp_bridge->gart_bus_addr>>12);
-		printk(KERN_INFO PFX "nlvm top &base = %8x\n",nlvm_addr);
+		dev_info(&agp_bridge->dev->dev, "nlvm top &base = %8x\n",
+			 nlvm_addr);
 	}
 #endif
 
@@ -315,8 +316,8 @@ static int __devinit agp_ali_probe(struct pci_dev *pdev,
 			goto found;
 	}
 
-	printk(KERN_ERR PFX "Unsupported ALi chipset (device id: %04x)\n",
-	     pdev->device);
+	dev_err(&pdev->dev, "unsupported ALi chipset [%04x/%04x])\n",
+		pdev->vendor, pdev->device);
 	return -ENODEV;
 
 
@@ -361,8 +362,7 @@ found:
 		bridge->driver = &ali_generic_bridge;
 	}
 
-	printk(KERN_INFO PFX "Detected ALi %s chipset\n",
-			devs[j].chipset_name);
+	dev_info(&pdev->dev, "ALi %s chipset\n", devs[j].chipset_name);
 
 	/* Fill in the mode register */
 	pci_read_config_dword(pdev,
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index 39a0718bc61..e280531843b 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -419,8 +419,8 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
 		return -ENODEV;
 
 	j = ent - agp_amdk7_pci_table;
-	printk(KERN_INFO PFX "Detected AMD %s chipset\n",
-	       amd_agp_device_ids[j].chipset_name);
+	dev_info(&pdev->dev, "AMD %s chipset\n",
+		 amd_agp_device_ids[j].chipset_name);
 
 	bridge = agp_alloc_bridge();
 	if (!bridge)
@@ -442,7 +442,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
 		while (!cap_ptr) {
 			gfxcard = pci_get_class(PCI_CLASS_DISPLAY_VGA<<8, gfxcard);
 			if (!gfxcard) {
-				printk (KERN_INFO PFX "Couldn't find an AGP VGA controller.\n");
+				dev_info(&pdev->dev, "no AGP VGA controller\n");
 				return -ENODEV;
 			}
 			cap_ptr = pci_find_capability(gfxcard, PCI_CAP_ID_AGP);
@@ -453,7 +453,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
 		   (if necessary at all). */
 		if (gfxcard->vendor == PCI_VENDOR_ID_NVIDIA) {
 			agp_bridge->flags |= AGP_ERRATA_1X;
-			printk (KERN_INFO PFX "AMD 751 chipset with NVidia GeForce detected. Forcing to 1X due to errata.\n");
+			dev_info(&pdev->dev, "AMD 751 chipset with NVidia GeForce; forcing 1X due to errata\n");
 		}
 		pci_dev_put(gfxcard);
 	}
@@ -469,7 +469,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
 			agp_bridge->flags = AGP_ERRATA_FASTWRITES;
 			agp_bridge->flags |= AGP_ERRATA_SBA;
 			agp_bridge->flags |= AGP_ERRATA_1X;
-			printk (KERN_INFO PFX "AMD 761 chipset with errata detected - disabling AGP fast writes & SBA and forcing to 1X.\n");
+			dev_info(&pdev->dev, "AMD 761 chipset with errata; disabling AGP fast writes & SBA and forcing to 1X\n");
 		}
 	}
 
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 481ffe87c71..7495c522d8e 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -34,6 +34,7 @@
 
 static struct resource *aperture_resource;
 static int __initdata agp_try_unsupported = 1;
+static int agp_bridges_found;
 
 static void amd64_tlbflush(struct agp_memory *temp)
 {
@@ -293,12 +294,13 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp,
 	 * so let double check that order, and lets trust the AMD NB settings
 	 */
 	if (order >=0 && aper + (32ULL<<(20 + order)) > 0x100000000ULL) {
-		printk(KERN_INFO "Aperture size %u MB is not right, using settings from NB\n",
-				  32 << order);
+		dev_info(&agp->dev, "aperture size %u MB is not right, using settings from NB\n",
+			 32 << order);
 		order = nb_order;
 	}
 
-	printk(KERN_INFO PFX "Aperture from AGP @ %Lx size %u MB\n", aper, 32 << order);
+	dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
+		 aper, 32 << order);
 	if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
 		return -1;
 
@@ -319,10 +321,10 @@ static __devinit int cache_nbs (struct pci_dev *pdev, u32 cap_ptr)
 	for (i = 0; i < num_k8_northbridges; i++) {
 		struct pci_dev *dev = k8_northbridges[i];
 		if (fix_northbridge(dev, pdev, cap_ptr) < 0) {
-			printk(KERN_ERR PFX "No usable aperture found.\n");
+			dev_err(&dev->dev, "no usable aperture found\n");
 #ifdef __x86_64__
 			/* should port this to i386 */
-			printk(KERN_ERR PFX "Consider rebooting with iommu=memaper=2 to get a good aperture.\n");
+			dev_err(&dev->dev, "consider rebooting with iommu=memaper=2 to get a good aperture\n");
 #endif
 			return -1;
 		}
@@ -345,14 +347,14 @@ static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data
 	default:   revstring="??"; break;
 	}
 
-	printk (KERN_INFO PFX "Detected AMD 8151 AGP Bridge rev %s\n", revstring);
+	dev_info(&pdev->dev, "AMD 8151 AGP Bridge rev %s\n", revstring);
 
 	/*
 	 * Work around errata.
 	 * Chips before B2 stepping incorrectly reporting v3.5
 	 */
 	if (pdev->revision < 0x13) {
-		printk (KERN_INFO PFX "Correcting AGP revision (reports 3.5, is really 3.0)\n");
+		dev_info(&pdev->dev, "correcting AGP revision (reports 3.5, is really 3.0)\n");
 		bridge->major_version = 3;
 		bridge->minor_version = 0;
 	}
@@ -375,11 +377,11 @@ static int __devinit uli_agp_init(struct pci_dev *pdev)
 	struct pci_dev *dev1;
 	int i;
 	unsigned size = amd64_fetch_size();
-	printk(KERN_INFO "Setting up ULi AGP.\n");
+
+	dev_info(&pdev->dev, "setting up ULi AGP\n");
 	dev1 = pci_get_slot (pdev->bus,PCI_DEVFN(0,0));
 	if (dev1 == NULL) {
-		printk(KERN_INFO PFX "Detected a ULi chipset, "
-			"but could not fine the secondary device.\n");
+		dev_info(&pdev->dev, "can't find ULi secondary device\n");
 		return -ENODEV;
 	}
 
@@ -388,7 +390,7 @@ static int __devinit uli_agp_init(struct pci_dev *pdev)
 			break;
 
 	if (i == ARRAY_SIZE(uli_sizes)) {
-		printk(KERN_INFO PFX "No ULi size found for %d\n", size);
+		dev_info(&pdev->dev, "no ULi size found for %d\n", size);
 		return -ENODEV;
 	}
 
@@ -433,13 +435,11 @@ static int nforce3_agp_init(struct pci_dev *pdev)
 	int i;
 	unsigned size = amd64_fetch_size();
 
-	printk(KERN_INFO PFX "Setting up Nforce3 AGP.\n");
+	dev_info(&pdev->dev, "setting up Nforce3 AGP\n");
 
 	dev1 = pci_get_slot(pdev->bus, PCI_DEVFN(11, 0));
 	if (dev1 == NULL) {
-		printk(KERN_INFO PFX "agpgart: Detected an NVIDIA "
-			"nForce3 chipset, but could not find "
-			"the secondary device.\n");
+		dev_info(&pdev->dev, "can't find Nforce3 secondary device\n");
 		return -ENODEV;
 	}
 
@@ -448,7 +448,7 @@ static int nforce3_agp_init(struct pci_dev *pdev)
 			break;
 
 	if (i == ARRAY_SIZE(nforce3_sizes)) {
-		printk(KERN_INFO PFX "No NForce3 size found for %d\n", size);
+		dev_info(&pdev->dev, "no NForce3 size found for %d\n", size);
 		return -ENODEV;
 	}
 
@@ -462,7 +462,7 @@ static int nforce3_agp_init(struct pci_dev *pdev)
 
 	/* if x86-64 aperture base is beyond 4G, exit here */
 	if ( (apbase & 0x7fff) >> (32 - 25) ) {
-		printk(KERN_INFO PFX "aperture base > 4G\n");
+		dev_info(&pdev->dev, "aperture base > 4G\n");
 		return -ENODEV;
 	}
 
@@ -489,6 +489,7 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev,
 {
 	struct agp_bridge_data *bridge;
 	u8 cap_ptr;
+	int err;
 
 	cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
 	if (!cap_ptr)
@@ -504,7 +505,8 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev,
 	    pdev->device == PCI_DEVICE_ID_AMD_8151_0) {
 		amd8151_init(pdev, bridge);
 	} else {
-		printk(KERN_INFO PFX "Detected AGP bridge %x\n", pdev->devfn);
+		dev_info(&pdev->dev, "AGP bridge [%04x/%04x]\n",
+			 pdev->vendor, pdev->device);
 	}
 
 	bridge->driver = &amd_8151_driver;
@@ -536,7 +538,12 @@ static int __devinit agp_amd64_probe(struct pci_dev *pdev,
 	}
 
 	pci_set_drvdata(pdev, bridge);
-	return agp_add_bridge(bridge);
+	err = agp_add_bridge(bridge);
+	if (err < 0)
+		return err;
+
+	agp_bridges_found++;
+	return 0;
 }
 
 static void __devexit agp_amd64_remove(struct pci_dev *pdev)
@@ -713,7 +720,11 @@ int __init agp_amd64_init(void)
 
 	if (agp_off)
 		return -EINVAL;
-	if (pci_register_driver(&agp_amd64_pci_driver) < 0) {
+	err = pci_register_driver(&agp_amd64_pci_driver);
+	if (err < 0)
+		return err;
+
+	if (agp_bridges_found == 0) {
 		struct pci_dev *dev;
 		if (!agp_try_unsupported && !agp_try_unsupported_boot) {
 			printk(KERN_INFO PFX "No supported AGP bridge found.\n");
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index 3a4566c0d84..6ecbcafb34b 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -486,8 +486,8 @@ static int __devinit agp_ati_probe(struct pci_dev *pdev,
 			goto found;
 	}
 
-	printk(KERN_ERR PFX
-	     "Unsupported Ati chipset (device id: %04x)\n", pdev->device);
+	dev_err(&pdev->dev, "unsupported Ati chipset [%04x/%04x])\n",
+		pdev->vendor, pdev->device);
 	return -ENODEV;
 
 found:
@@ -500,8 +500,7 @@ found:
 
 	bridge->driver = &ati_generic_bridge;
 
-	printk(KERN_INFO PFX "Detected Ati %s chipset\n",
-			devs[j].chipset_name);
+	dev_info(&pdev->dev, "Ati %s chipset\n", devs[j].chipset_name);
 
 	/* Fill in the mode register */
 	pci_read_config_dword(pdev,
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index 1ec87104e68..3a3cc03d401 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -144,7 +144,8 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 		void *addr = bridge->driver->agp_alloc_page(bridge);
 
 		if (!addr) {
-			printk(KERN_ERR PFX "unable to get memory for scratch page.\n");
+			dev_err(&bridge->dev->dev,
+				"can't get memory for scratch page\n");
 			return -ENOMEM;
 		}
 
@@ -155,13 +156,13 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 
 	size_value = bridge->driver->fetch_size();
 	if (size_value == 0) {
-		printk(KERN_ERR PFX "unable to determine aperture size.\n");
+		dev_err(&bridge->dev->dev, "can't determine aperture size\n");
 		rc = -EINVAL;
 		goto err_out;
 	}
 	if (bridge->driver->create_gatt_table(bridge)) {
-		printk(KERN_ERR PFX
-		    "unable to get memory for graphics translation table.\n");
+		dev_err(&bridge->dev->dev,
+			"can't get memory for graphics translation table\n");
 		rc = -ENOMEM;
 		goto err_out;
 	}
@@ -169,7 +170,8 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 
 	bridge->key_list = vmalloc(PAGE_SIZE * 4);
 	if (bridge->key_list == NULL) {
-		printk(KERN_ERR PFX "error allocating memory for key lists.\n");
+		dev_err(&bridge->dev->dev,
+			"can't allocate memory for key lists\n");
 		rc = -ENOMEM;
 		goto err_out;
 	}
@@ -179,10 +181,12 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 	memset(bridge->key_list, 0, PAGE_SIZE * 4);
 
 	if (bridge->driver->configure()) {
-		printk(KERN_ERR PFX "error configuring host chipset.\n");
+		dev_err(&bridge->dev->dev, "error configuring host chipset\n");
 		rc = -EINVAL;
 		goto err_out;
 	}
+	INIT_LIST_HEAD(&bridge->mapped_list);
+	spin_lock_init(&bridge->mapped_lock);
 
 	return 0;
 
@@ -269,25 +273,27 @@ int agp_add_bridge(struct agp_bridge_data *bridge)
 
 	/* Grab reference on the chipset driver. */
 	if (!try_module_get(bridge->driver->owner)) {
-		printk (KERN_INFO PFX "Couldn't lock chipset driver.\n");
+		dev_info(&bridge->dev->dev, "can't lock chipset driver\n");
 		return -EINVAL;
 	}
 
 	error = agp_backend_initialize(bridge);
 	if (error) {
-		printk (KERN_INFO PFX "agp_backend_initialize() failed.\n");
+		dev_info(&bridge->dev->dev,
+			 "agp_backend_initialize() failed\n");
 		goto err_out;
 	}
 
 	if (list_empty(&agp_bridges)) {
 		error = agp_frontend_initialize();
 		if (error) {
-			printk (KERN_INFO PFX "agp_frontend_initialize() failed.\n");
+			dev_info(&bridge->dev->dev,
+				 "agp_frontend_initialize() failed\n");
 			goto frontend_err;
 		}
 
-		printk(KERN_INFO PFX "AGP aperture is %dM @ 0x%lx\n",
-			bridge->driver->fetch_size(), bridge->gart_bus_addr);
+		dev_info(&bridge->dev->dev, "AGP aperture is %dM @ 0x%lx\n",
+			 bridge->driver->fetch_size(), bridge->gart_bus_addr);
 
 	}
 
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index eaa1a355bb3..118dbde25dc 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -429,6 +429,10 @@ int agp_bind_memory(struct agp_memory *curr, off_t pg_start)
 
 	curr->is_bound = true;
 	curr->pg_start = pg_start;
+	spin_lock(&agp_bridge->mapped_lock);
+	list_add(&curr->mapped_list, &agp_bridge->mapped_list);
+	spin_unlock(&agp_bridge->mapped_lock);
+
 	return 0;
 }
 EXPORT_SYMBOL(agp_bind_memory);
@@ -461,10 +465,34 @@ int agp_unbind_memory(struct agp_memory *curr)
 
 	curr->is_bound = false;
 	curr->pg_start = 0;
+	spin_lock(&curr->bridge->mapped_lock);
+	list_del(&curr->mapped_list);
+	spin_unlock(&curr->bridge->mapped_lock);
 	return 0;
 }
 EXPORT_SYMBOL(agp_unbind_memory);
 
+/**
+ *	agp_rebind_emmory  -  Rewrite the entire GATT, useful on resume
+ */
+int agp_rebind_memory(void)
+{
+	struct agp_memory *curr;
+	int ret_val = 0;
+
+	spin_lock(&agp_bridge->mapped_lock);
+	list_for_each_entry(curr, &agp_bridge->mapped_list, mapped_list) {
+		ret_val = curr->bridge->driver->insert_memory(curr,
+							      curr->pg_start,
+							      curr->type);
+		if (ret_val != 0)
+			break;
+	}
+	spin_unlock(&agp_bridge->mapped_lock);
+	return ret_val;
+}
+EXPORT_SYMBOL(agp_rebind_memory);
+
 /* End - Routines for handling swapping of agp_memory into the GATT */
 
 
@@ -771,8 +799,8 @@ void agp_device_command(u32 bridge_agpstat, bool agp_v3)
 		if (!agp)
 			continue;
 
-		printk(KERN_INFO PFX "Putting AGP V%d device at %s into %dx mode\n",
-				agp_v3 ? 3 : 2, pci_name(device), mode);
+		dev_info(&device->dev, "putting AGP V%d device into %dx mode\n",
+			 agp_v3 ? 3 : 2, mode);
 		pci_write_config_dword(device, agp + PCI_AGP_COMMAND, bridge_agpstat);
 	}
 }
@@ -800,10 +828,8 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode)
 
 	get_agp_version(agp_bridge);
 
-	printk(KERN_INFO PFX "Found an AGP %d.%d compliant device at %s.\n",
-				agp_bridge->major_version,
-				agp_bridge->minor_version,
-				pci_name(agp_bridge->dev));
+	dev_info(&agp_bridge->dev->dev, "AGP %d.%d bridge\n",
+		 agp_bridge->major_version, agp_bridge->minor_version);
 
 	pci_read_config_dword(agp_bridge->dev,
 		      agp_bridge->capndx + PCI_AGP_STATUS, &bridge_agpstat);
@@ -832,8 +858,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode)
 		    pci_write_config_dword(bridge->dev,
 					bridge->capndx+AGPCTRL, temp);
 
-		    printk(KERN_INFO PFX "Device is in legacy mode,"
-				" falling back to 2.x\n");
+		    dev_info(&bridge->dev->dev, "bridge is in legacy mode, falling back to 2.x\n");
 		}
 	}
 
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index df702642ab8..016fdf0623a 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -32,8 +32,8 @@
 #define PCI_DEVICE_ID_INTEL_Q35_IG          0x29B2
 #define PCI_DEVICE_ID_INTEL_Q33_HB          0x29D0
 #define PCI_DEVICE_ID_INTEL_Q33_IG          0x29D2
-#define PCI_DEVICE_ID_INTEL_IGD_HB          0x2A40
-#define PCI_DEVICE_ID_INTEL_IGD_IG          0x2A42
+#define PCI_DEVICE_ID_INTEL_GM45_HB         0x2A40
+#define PCI_DEVICE_ID_INTEL_GM45_IG         0x2A42
 #define PCI_DEVICE_ID_INTEL_IGD_E_HB        0x2E00
 #define PCI_DEVICE_ID_INTEL_IGD_E_IG        0x2E02
 #define PCI_DEVICE_ID_INTEL_Q45_HB          0x2E10
@@ -55,7 +55,7 @@
 		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965G_HB || \
 		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965GM_HB || \
 		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82965GME_HB || \
-		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_HB)
+		 agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB)
 
 #define IS_G33 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G33_HB || \
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q35_HB || \
@@ -161,7 +161,7 @@ static int intel_i810_fetch_size(void)
 	values = A_SIZE_FIX(agp_bridge->driver->aperture_sizes);
 
 	if ((smram_miscc & I810_GMS) == I810_GMS_DISABLE) {
-		printk(KERN_WARNING PFX "i810 is disabled\n");
+		dev_warn(&agp_bridge->dev->dev, "i810 is disabled\n");
 		return 0;
 	}
 	if ((smram_miscc & I810_GFX_MEM_WIN_SIZE) == I810_GFX_MEM_WIN_32M) {
@@ -193,7 +193,8 @@ static int intel_i810_configure(void)
 
 		intel_private.registers = ioremap(temp, 128 * 4096);
 		if (!intel_private.registers) {
-			printk(KERN_ERR PFX "Unable to remap memory.\n");
+			dev_err(&intel_private.pcidev->dev,
+				"can't remap memory\n");
 			return -ENOMEM;
 		}
 	}
@@ -201,7 +202,8 @@ static int intel_i810_configure(void)
 	if ((readl(intel_private.registers+I810_DRAM_CTL)
 		& I810_DRAM_ROW_0) == I810_DRAM_ROW_0_SDRAM) {
 		/* This will need to be dynamically assigned */
-		printk(KERN_INFO PFX "detected 4MB dedicated video ram.\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "detected 4MB dedicated video ram\n");
 		intel_private.num_dcache_entries = 1024;
 	}
 	pci_read_config_dword(intel_private.pcidev, I810_GMADDR, &temp);
@@ -500,8 +502,8 @@ static void intel_i830_init_gtt_entries(void)
 			size = 1024 + 512;
 			break;
 		default:
-			printk(KERN_INFO PFX "Unknown page table size, "
-			       "assuming 512KB\n");
+			dev_info(&intel_private.pcidev->dev,
+				 "unknown page table size, assuming 512KB\n");
 			size = 512;
 		}
 		size += 4; /* add in BIOS popup space */
@@ -515,8 +517,8 @@ static void intel_i830_init_gtt_entries(void)
 			size = 2048;
 			break;
 		default:
-			printk(KERN_INFO PFX "Unknown page table size 0x%x, "
-				"assuming 512KB\n",
+			dev_info(&agp_bridge->dev->dev,
+				 "unknown page table size 0x%x, assuming 512KB\n",
 				(gmch_ctrl & G33_PGETBL_SIZE_MASK));
 			size = 512;
 		}
@@ -627,11 +629,11 @@ static void intel_i830_init_gtt_entries(void)
 		}
 	}
 	if (gtt_entries > 0)
-		printk(KERN_INFO PFX "Detected %dK %s memory.\n",
+		dev_info(&agp_bridge->dev->dev, "detected %dK %s memory\n",
 		       gtt_entries / KB(1), local ? "local" : "stolen");
 	else
-		printk(KERN_INFO PFX
-		       "No pre-allocated video memory detected.\n");
+		dev_info(&agp_bridge->dev->dev,
+		       "no pre-allocated video memory detected\n");
 	gtt_entries /= KB(4);
 
 	intel_private.gtt_entries = gtt_entries;
@@ -801,10 +803,12 @@ static int intel_i830_insert_entries(struct agp_memory *mem, off_t pg_start,
 	num_entries = A_SIZE_FIX(temp)->num_entries;
 
 	if (pg_start < intel_private.gtt_entries) {
-		printk(KERN_DEBUG PFX "pg_start == 0x%.8lx,intel_private.gtt_entries == 0x%.8x\n",
-				pg_start, intel_private.gtt_entries);
+		dev_printk(KERN_DEBUG, &intel_private.pcidev->dev,
+			   "pg_start == 0x%.8lx, intel_private.gtt_entries == 0x%.8x\n",
+			   pg_start, intel_private.gtt_entries);
 
-		printk(KERN_INFO PFX "Trying to insert into local/stolen memory\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "trying to insert into local/stolen memory\n");
 		goto out_err;
 	}
 
@@ -851,7 +855,8 @@ static int intel_i830_remove_entries(struct agp_memory *mem, off_t pg_start,
 		return 0;
 
 	if (pg_start < intel_private.gtt_entries) {
-		printk(KERN_INFO PFX "Trying to disable local/stolen memory\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "trying to disable local/stolen memory\n");
 		return -EINVAL;
 	}
 
@@ -957,7 +962,7 @@ static void intel_i9xx_setup_flush(void)
 	if (intel_private.ifp_resource.start) {
 		intel_private.i9xx_flush_page = ioremap_nocache(intel_private.ifp_resource.start, PAGE_SIZE);
 		if (!intel_private.i9xx_flush_page)
-			printk(KERN_INFO "unable to ioremap flush  page - no chipset flushing");
+			dev_info(&intel_private.pcidev->dev, "can't ioremap flush page - no chipset flushing");
 	}
 }
 
@@ -1028,10 +1033,12 @@ static int intel_i915_insert_entries(struct agp_memory *mem, off_t pg_start,
 	num_entries = A_SIZE_FIX(temp)->num_entries;
 
 	if (pg_start < intel_private.gtt_entries) {
-		printk(KERN_DEBUG PFX "pg_start == 0x%.8lx,intel_private.gtt_entries == 0x%.8x\n",
-				pg_start, intel_private.gtt_entries);
+		dev_printk(KERN_DEBUG, &intel_private.pcidev->dev,
+			   "pg_start == 0x%.8lx, intel_private.gtt_entries == 0x%.8x\n",
+			   pg_start, intel_private.gtt_entries);
 
-		printk(KERN_INFO PFX "Trying to insert into local/stolen memory\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "trying to insert into local/stolen memory\n");
 		goto out_err;
 	}
 
@@ -1078,7 +1085,8 @@ static int intel_i915_remove_entries(struct agp_memory *mem, off_t pg_start,
 		return 0;
 
 	if (pg_start < intel_private.gtt_entries) {
-		printk(KERN_INFO PFX "Trying to disable local/stolen memory\n");
+		dev_info(&intel_private.pcidev->dev,
+			 "trying to disable local/stolen memory\n");
 		return -EINVAL;
 	}
 
@@ -1182,7 +1190,7 @@ static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge,
 static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size)
 {
 	switch (agp_bridge->dev->device) {
-	case PCI_DEVICE_ID_INTEL_IGD_HB:
+	case PCI_DEVICE_ID_INTEL_GM45_HB:
 	case PCI_DEVICE_ID_INTEL_IGD_E_HB:
 	case PCI_DEVICE_ID_INTEL_Q45_HB:
 	case PCI_DEVICE_ID_INTEL_G45_HB:
@@ -1379,7 +1387,7 @@ static int intel_815_configure(void)
 	/* the Intel 815 chipset spec. says that bits 29-31 in the
 	* ATTBASE register are reserved -> try not to write them */
 	if (agp_bridge->gatt_bus_addr & INTEL_815_ATTBASE_MASK) {
-		printk(KERN_EMERG PFX "gatt bus addr too high");
+		dev_emerg(&agp_bridge->dev->dev, "gatt bus addr too high");
 		return -EINVAL;
 	}
 
@@ -2117,8 +2125,8 @@ static const struct intel_driver_description {
 		NULL, &intel_g33_driver },
 	{ PCI_DEVICE_ID_INTEL_Q33_HB, PCI_DEVICE_ID_INTEL_Q33_IG, 0, "Q33",
 		NULL, &intel_g33_driver },
-	{ PCI_DEVICE_ID_INTEL_IGD_HB, PCI_DEVICE_ID_INTEL_IGD_IG, 0,
-	    "Intel Integrated Graphics Device", NULL, &intel_i965_driver },
+	{ PCI_DEVICE_ID_INTEL_GM45_HB, PCI_DEVICE_ID_INTEL_GM45_IG, 0,
+	    "Mobile Intel? GM45 Express", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_IGD_E_HB, PCI_DEVICE_ID_INTEL_IGD_E_IG, 0,
 	    "Intel Integrated Graphics Device", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_Q45_HB, PCI_DEVICE_ID_INTEL_Q45_IG, 0,
@@ -2163,8 +2171,8 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 
 	if (intel_agp_chipsets[i].name == NULL) {
 		if (cap_ptr)
-			printk(KERN_WARNING PFX "Unsupported Intel chipset"
-			       "(device id: %04x)\n", pdev->device);
+			dev_warn(&pdev->dev, "unsupported Intel chipset [%04x/%04x]\n",
+				 pdev->vendor, pdev->device);
 		agp_put_bridge(bridge);
 		return -ENODEV;
 	}
@@ -2172,9 +2180,8 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	if (bridge->driver == NULL) {
 		/* bridge has no AGP and no IGD detected */
 		if (cap_ptr)
-			printk(KERN_WARNING PFX "Failed to find bridge device "
-				"(chip_id: %04x)\n",
-				intel_agp_chipsets[i].gmch_chip_id);
+			dev_warn(&pdev->dev, "can't find bridge device (chip_id: %04x)\n",
+				 intel_agp_chipsets[i].gmch_chip_id);
 		agp_put_bridge(bridge);
 		return -ENODEV;
 	}
@@ -2183,8 +2190,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	bridge->capndx = cap_ptr;
 	bridge->dev_private_data = &intel_private;
 
-	printk(KERN_INFO PFX "Detected an Intel %s Chipset.\n",
-		intel_agp_chipsets[i].name);
+	dev_info(&pdev->dev, "Intel %s Chipset\n", intel_agp_chipsets[i].name);
 
 	/*
 	* The following fixes the case where the BIOS has "forgotten" to
@@ -2194,7 +2200,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	r = &pdev->resource[0];
 	if (!r->start && r->end) {
 		if (pci_assign_resource(pdev, 0)) {
-			printk(KERN_ERR PFX "could not assign resource 0\n");
+			dev_err(&pdev->dev, "can't assign resource 0\n");
 			agp_put_bridge(bridge);
 			return -ENODEV;
 		}
@@ -2206,7 +2212,7 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	* 20030610 - hamish@zot.org
 	*/
 	if (pci_enable_device(pdev)) {
-		printk(KERN_ERR PFX "Unable to Enable PCI device\n");
+		dev_err(&pdev->dev, "can't enable PCI device\n");
 		agp_put_bridge(bridge);
 		return -ENODEV;
 	}
@@ -2238,6 +2244,7 @@ static void __devexit agp_intel_remove(struct pci_dev *pdev)
 static int agp_intel_resume(struct pci_dev *pdev)
 {
 	struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
+	int ret_val;
 
 	pci_restore_state(pdev);
 
@@ -2265,6 +2272,10 @@ static int agp_intel_resume(struct pci_dev *pdev)
 	else if (bridge->driver == &intel_i965_driver)
 		intel_i915_configure();
 
+	ret_val = agp_rebind_memory();
+	if (ret_val != 0)
+		return ret_val;
+
 	return 0;
 }
 #endif
@@ -2315,7 +2326,7 @@ static struct pci_device_id agp_intel_pci_table[] = {
 	ID(PCI_DEVICE_ID_INTEL_G33_HB),
 	ID(PCI_DEVICE_ID_INTEL_Q35_HB),
 	ID(PCI_DEVICE_ID_INTEL_Q33_HB),
-	ID(PCI_DEVICE_ID_INTEL_IGD_HB),
+	ID(PCI_DEVICE_ID_INTEL_GM45_HB),
 	ID(PCI_DEVICE_ID_INTEL_IGD_E_HB),
 	ID(PCI_DEVICE_ID_INTEL_Q45_HB),
 	ID(PCI_DEVICE_ID_INTEL_G45_HB),
diff --git a/drivers/char/agp/isoch.c b/drivers/char/agp/isoch.c
index 3f9ccde6237..c73385cc4b8 100644
--- a/drivers/char/agp/isoch.c
+++ b/drivers/char/agp/isoch.c
@@ -153,7 +153,7 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
 
 	/* Check if this configuration has any chance of working */
 	if (tot_bw > target.maxbw) {
-		printk(KERN_ERR PFX "isochronous bandwidth required "
+		dev_err(&td->dev, "isochronous bandwidth required "
 			"by AGP 3.0 devices exceeds that which is supported by "
 			"the AGP 3.0 bridge!\n");
 		ret = -ENODEV;
@@ -188,7 +188,7 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
 	/* Exit if the minimal ISOCH_N allocation among the masters is more
 	 * than the target can handle. */
 	if (tot_n > target.n) {
-		printk(KERN_ERR PFX "number of isochronous "
+		dev_err(&td->dev, "number of isochronous "
 			"transactions per period required by AGP 3.0 devices "
 			"exceeds that which is supported by the AGP 3.0 "
 			"bridge!\n");
@@ -229,7 +229,7 @@ static int agp_3_5_isochronous_node_enable(struct agp_bridge_data *bridge,
 	/* Exit if the minimal RQ needs of the masters exceeds what the target
 	 * can provide. */
 	if (tot_rq > rq_isoch) {
-		printk(KERN_ERR PFX "number of request queue slots "
+		dev_err(&td->dev, "number of request queue slots "
 			"required by the isochronous bandwidth requested by "
 			"AGP 3.0 devices exceeds the number provided by the "
 			"AGP 3.0 bridge!\n");
@@ -359,8 +359,9 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 			case 0x0001:    /* Unclassified device */
 				/* Don't know what this is, but log it for investigation. */
 				if (mcapndx != 0) {
-					printk (KERN_INFO PFX "Wacky, found unclassified AGP device. %x:%x\n",
-						dev->vendor, dev->device);
+					dev_info(&td->dev, "wacky, found unclassified AGP device %s [%04x/%04x]\n",
+						 pci_name(dev),
+						 dev->vendor, dev->device);
 				}
 				continue;
 
@@ -407,17 +408,18 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 		}
 
 		if (mcapndx == 0) {
-			printk(KERN_ERR PFX "woah!  Non-AGP device "
-				"found on the secondary bus of an AGP 3.5 bridge!\n");
+			dev_err(&td->dev, "woah!  Non-AGP device %s on "
+				"secondary bus of AGP 3.5 bridge!\n",
+				pci_name(dev));
 			ret = -ENODEV;
 			goto free_and_exit;
 		}
 
 		mmajor = (ncapid >> AGP_MAJOR_VERSION_SHIFT) & 0xf;
 		if (mmajor < 3) {
-			printk(KERN_ERR PFX "woah!  AGP 2.0 device "
-				"found on the secondary bus of an AGP 3.5 "
-				"bridge operating with AGP 3.0 electricals!\n");
+			dev_err(&td->dev, "woah!  AGP 2.0 device %s on "
+				"secondary bus of AGP 3.5 bridge operating "
+				"with AGP 3.0 electricals!\n", pci_name(dev));
 			ret = -ENODEV;
 			goto free_and_exit;
 		}
@@ -427,10 +429,10 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 		pci_read_config_dword(dev, cur->capndx+AGPSTAT, &mstatus);
 
 		if (((mstatus >> 3) & 0x1) == 0) {
-			printk(KERN_ERR PFX "woah!  AGP 3.x device "
-				"not operating in AGP 3.x mode found on the "
-				"secondary bus of an AGP 3.5 bridge operating "
-				"with AGP 3.0 electricals!\n");
+			dev_err(&td->dev, "woah!  AGP 3.x device %s not "
+				"operating in AGP 3.x mode on secondary bus "
+				"of AGP 3.5 bridge operating with AGP 3.0 "
+				"electricals!\n", pci_name(dev));
 			ret = -ENODEV;
 			goto free_and_exit;
 		}
@@ -444,9 +446,9 @@ int agp_3_5_enable(struct agp_bridge_data *bridge)
 	if (isoch) {
 		ret = agp_3_5_isochronous_node_enable(bridge, dev_list, ndevs);
 		if (ret) {
-			printk(KERN_INFO PFX "Something bad happened setting "
-			       "up isochronous xfers.  Falling back to "
-			       "non-isochronous xfer mode.\n");
+			dev_info(&td->dev, "something bad happened setting "
+				 "up isochronous xfers; falling back to "
+				 "non-isochronous xfer mode\n");
 		} else {
 			goto free_and_exit;
 		}
@@ -466,4 +468,3 @@ free_and_exit:
 get_out:
 	return ret;
 }
-
diff --git a/drivers/char/agp/sis-agp.c b/drivers/char/agp/sis-agp.c
index b6791846809..2587ef96a96 100644
--- a/drivers/char/agp/sis-agp.c
+++ b/drivers/char/agp/sis-agp.c
@@ -79,10 +79,8 @@ static void sis_delayed_enable(struct agp_bridge_data *bridge, u32 mode)
 	u32 command;
 	int rate;
 
-	printk(KERN_INFO PFX "Found an AGP %d.%d compliant device at %s.\n",
-		agp_bridge->major_version,
-		agp_bridge->minor_version,
-		pci_name(agp_bridge->dev));
+	dev_info(&agp_bridge->dev->dev, "AGP %d.%d bridge\n",
+		 agp_bridge->major_version, agp_bridge->minor_version);
 
 	pci_read_config_dword(agp_bridge->dev, agp_bridge->capndx + PCI_AGP_STATUS, &command);
 	command = agp_collect_device_status(bridge, mode, command);
@@ -94,8 +92,8 @@ static void sis_delayed_enable(struct agp_bridge_data *bridge, u32 mode)
 		if (!agp)
 			continue;
 
-		printk(KERN_INFO PFX "Putting AGP V3 device at %s into %dx mode\n",
-			pci_name(device), rate);
+		dev_info(&agp_bridge->dev->dev, "putting AGP V3 device at %s into %dx mode\n",
+			 pci_name(device), rate);
 
 		pci_write_config_dword(device, agp + PCI_AGP_COMMAND, command);
 
@@ -105,7 +103,7 @@ static void sis_delayed_enable(struct agp_bridge_data *bridge, u32 mode)
 		 * cannot be configured
 		 */
 		if (device->device == bridge->dev->device) {
-			printk(KERN_INFO PFX "SiS delay workaround: giving bridge time to recover.\n");
+			dev_info(&agp_bridge->dev->dev, "SiS delay workaround: giving bridge time to recover\n");
 			msleep(10);
 		}
 	}
@@ -190,7 +188,8 @@ static int __devinit agp_sis_probe(struct pci_dev *pdev,
 		return -ENODEV;
 
 
-	printk(KERN_INFO PFX "Detected SiS chipset - id:%i\n", pdev->device);
+	dev_info(&pdev->dev, "SiS chipset [%04x/%04x]\n",
+		 pdev->vendor, pdev->device);
 	bridge = agp_alloc_bridge();
 	if (!bridge)
 		return -ENOMEM;
@@ -242,7 +241,7 @@ static struct pci_device_id agp_sis_pci_table[] = {
 		.class		= (PCI_CLASS_BRIDGE_HOST << 8),
 		.class_mask	= ~0,
 		.vendor		= PCI_VENDOR_ID_SI,
-		.device		= PCI_DEVICE_ID_SI_5591_AGP,
+		.device		= PCI_DEVICE_ID_SI_5591,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
 	},
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index 0e054c13449..2fb27fe4c10 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -241,7 +241,8 @@ static void serverworks_tlbflush(struct agp_memory *temp)
 	while (readb(serverworks_private.registers+SVWRKS_POSTFLUSH) == 1) {
 		cpu_relax();
 		if (time_after(jiffies, timeout)) {
-			printk(KERN_ERR PFX "TLB post flush took more than 3 seconds\n");
+			dev_err(&serverworks_private.svrwrks_dev->dev,
+				"TLB post flush took more than 3 seconds\n");
 			break;
 		}
 	}
@@ -251,7 +252,8 @@ static void serverworks_tlbflush(struct agp_memory *temp)
 	while (readl(serverworks_private.registers+SVWRKS_DIRFLUSH) == 1) {
 		cpu_relax();
 		if (time_after(jiffies, timeout)) {
-			printk(KERN_ERR PFX "TLB Dir flush took more than 3 seconds\n");
+			dev_err(&serverworks_private.svrwrks_dev->dev,
+				"TLB Dir flush took more than 3 seconds\n");
 			break;
 		}
 	}
@@ -271,7 +273,7 @@ static int serverworks_configure(void)
 	temp = (temp & PCI_BASE_ADDRESS_MEM_MASK);
 	serverworks_private.registers = (volatile u8 __iomem *) ioremap(temp, 4096);
 	if (!serverworks_private.registers) {
-		printk (KERN_ERR PFX "Unable to ioremap() memory.\n");
+		dev_err(&agp_bridge->dev->dev, "can't ioremap(%#x)\n", temp);
 		return -ENOMEM;
 	}
 
@@ -451,7 +453,7 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 
 	switch (pdev->device) {
 	case 0x0006:
-		printk (KERN_ERR PFX "ServerWorks CNB20HE is unsupported due to lack of documentation.\n");
+		dev_err(&pdev->dev, "ServerWorks CNB20HE is unsupported due to lack of documentation\n");
 		return -ENODEV;
 
 	case PCI_DEVICE_ID_SERVERWORKS_HE:
@@ -461,8 +463,8 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 
 	default:
 		if (cap_ptr)
-			printk(KERN_ERR PFX "Unsupported Serverworks chipset "
-					"(device id: %04x)\n", pdev->device);
+			dev_err(&pdev->dev, "unsupported Serverworks chipset "
+				"[%04x/%04x]\n", pdev->vendor, pdev->device);
 		return -ENODEV;
 	}
 
@@ -470,8 +472,7 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 	bridge_dev = pci_get_bus_and_slot((unsigned int)pdev->bus->number,
 			PCI_DEVFN(0, 1));
 	if (!bridge_dev) {
-		printk(KERN_INFO PFX "Detected a Serverworks chipset "
-		       "but could not find the secondary device.\n");
+		dev_info(&pdev->dev, "can't find secondary device\n");
 		return -ENODEV;
 	}
 
@@ -482,8 +483,8 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 	if (temp & PCI_BASE_ADDRESS_MEM_TYPE_64) {
 		pci_read_config_dword(pdev, SVWRKS_APSIZE + 4, &temp2);
 		if (temp2 != 0) {
-			printk(KERN_INFO PFX "Detected 64 bit aperture address, "
-			       "but top bits are not zero.  Disabling agp\n");
+			dev_info(&pdev->dev, "64 bit aperture address, "
+				 "but top bits are not zero; disabling AGP\n");
 			return -ENODEV;
 		}
 		serverworks_private.mm_addr_ofs = 0x18;
@@ -495,8 +496,8 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
 		pci_read_config_dword(pdev,
 				serverworks_private.mm_addr_ofs + 4, &temp2);
 		if (temp2 != 0) {
-			printk(KERN_INFO PFX "Detected 64 bit MMIO address, "
-			       "but top bits are not zero.  Disabling agp\n");
+			dev_info(&pdev->dev, "64 bit MMIO address, but top "
+				 "bits are not zero; disabling AGP\n");
 			return -ENODEV;
 		}
 	}
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index d2fa3cfca02..eef72709ec5 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -46,8 +46,8 @@ static int uninorth_fetch_size(void)
 				break;
 
 		if (i == agp_bridge->driver->num_aperture_sizes) {
-			printk(KERN_ERR PFX "Invalid aperture size, using"
-			       " default\n");
+			dev_err(&agp_bridge->dev->dev, "invalid aperture size, "
+				"using default\n");
 			size = 0;
 			aperture = NULL;
 		}
@@ -108,8 +108,8 @@ static int uninorth_configure(void)
 
 	current_size = A_SIZE_32(agp_bridge->current_size);
 
-	printk(KERN_INFO PFX "configuring for size idx: %d\n",
-	       current_size->size_value);
+	dev_info(&agp_bridge->dev->dev, "configuring for size idx: %d\n",
+		 current_size->size_value);
 
 	/* aperture size and gatt addr */
 	pci_write_config_dword(agp_bridge->dev,
@@ -197,8 +197,9 @@ static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
 	gp = (u32 *) &agp_bridge->gatt_table[pg_start];
 	for (i = 0; i < mem->page_count; ++i) {
 		if (gp[i]) {
-			printk("u3_insert_memory: entry 0x%x occupied (%x)\n",
-			       i, gp[i]);
+			dev_info(&agp_bridge->dev->dev,
+				 "u3_insert_memory: entry 0x%x occupied (%x)\n",
+				 i, gp[i]);
 			return -EBUSY;
 		}
 	}
@@ -276,8 +277,8 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode)
 				       &scratch);
 	} while ((scratch & PCI_AGP_COMMAND_AGP) == 0 && ++timeout < 1000);
 	if ((scratch & PCI_AGP_COMMAND_AGP) == 0)
-		printk(KERN_ERR PFX "failed to write UniNorth AGP"
-		       " command register\n");
+		dev_err(&bridge->dev->dev, "can't write UniNorth AGP "
+			"command register\n");
 
 	if (uninorth_rev >= 0x30) {
 		/* This is an AGP V3 */
@@ -330,8 +331,8 @@ static int agp_uninorth_suspend(struct pci_dev *pdev)
 		pci_read_config_dword(device, agp + PCI_AGP_COMMAND, &cmd);
 		if (!(cmd & PCI_AGP_COMMAND_AGP))
 			continue;
-		printk("uninorth-agp: disabling AGP on device %s\n",
-				pci_name(device));
+		dev_info(&pdev->dev, "disabling AGP on device %s\n",
+			 pci_name(device));
 		cmd &= ~PCI_AGP_COMMAND_AGP;
 		pci_write_config_dword(device, agp + PCI_AGP_COMMAND, cmd);
 	}
@@ -341,8 +342,7 @@ static int agp_uninorth_suspend(struct pci_dev *pdev)
 	pci_read_config_dword(pdev, agp + PCI_AGP_COMMAND, &cmd);
 	bridge->dev_private_data = (void *)(long)cmd;
 	if (cmd & PCI_AGP_COMMAND_AGP) {
-		printk("uninorth-agp: disabling AGP on bridge %s\n",
-				pci_name(pdev));
+		dev_info(&pdev->dev, "disabling AGP on bridge\n");
 		cmd &= ~PCI_AGP_COMMAND_AGP;
 		pci_write_config_dword(pdev, agp + PCI_AGP_COMMAND, cmd);
 	}
@@ -591,14 +591,14 @@ static int __devinit agp_uninorth_probe(struct pci_dev *pdev,
 	/* probe for known chipsets */
 	for (j = 0; devs[j].chipset_name != NULL; ++j) {
 		if (pdev->device == devs[j].device_id) {
-			printk(KERN_INFO PFX "Detected Apple %s chipset\n",
-			       devs[j].chipset_name);
+			dev_info(&pdev->dev, "Apple %s chipset\n",
+				 devs[j].chipset_name);
 			goto found;
 		}
 	}
 
-	printk(KERN_ERR PFX "Unsupported Apple chipset (device id: %04x).\n",
-		pdev->device);
+	dev_err(&pdev->dev, "unsupported Apple chipset [%04x/%04x]\n",
+		pdev->vendor, pdev->device);
 	return -ENODEV;
 
  found:
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 02aac104842..fd64137b1ab 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -322,11 +322,10 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 
 	hp->tty = tty;
 
-	if (hp->ops->notifier_add)
-		rc = hp->ops->notifier_add(hp, hp->data);
-
 	spin_unlock_irqrestore(&hp->lock, flags);
 
+	if (hp->ops->notifier_add)
+		rc = hp->ops->notifier_add(hp, hp->data);
 
 	/*
 	 * If the notifier fails we return an error.  The tty layer
diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c
index f7feae4ebb5..128202e18fc 100644
--- a/drivers/char/hw_random/via-rng.c
+++ b/drivers/char/hw_random/via-rng.c
@@ -31,6 +31,7 @@
 #include <asm/io.h>
 #include <asm/msr.h>
 #include <asm/cpufeature.h>
+#include <asm/i387.h>
 
 
 #define PFX	KBUILD_MODNAME ": "
@@ -67,16 +68,23 @@ enum {
  * Another possible performance boost may come from simply buffering
  * until we have 4 bytes, thus returning a u32 at a time,
  * instead of the current u8-at-a-time.
+ *
+ * Padlock instructions can generate a spurious DNA fault, so
+ * we have to call them in the context of irq_ts_save/restore()
  */
 
 static inline u32 xstore(u32 *addr, u32 edx_in)
 {
 	u32 eax_out;
+	int ts_state;
+
+	ts_state = irq_ts_save();
 
 	asm(".byte 0x0F,0xA7,0xC0 /* xstore %%edi (addr=%0) */"
 		:"=m"(*addr), "=a"(eax_out)
 		:"D"(addr), "d"(edx_in));
 
+	irq_ts_restore(ts_state);
 	return eax_out;
 }
 
diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c
index b1414507997..3a23e7694d5 100644
--- a/drivers/char/pcmcia/ipwireless/tty.c
+++ b/drivers/char/pcmcia/ipwireless/tty.c
@@ -29,7 +29,6 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/uaccess.h>
-#include <linux/version.h>
 
 #include "tty.h"
 #include "network.h"
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index d9799e2bcfb..f53d4d00faf 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -78,7 +78,6 @@
 #include <linux/wait.h>
 #include <linux/bcd.h>
 #include <linux/delay.h>
-#include <linux/smp_lock.h>
 #include <linux/uaccess.h>
 
 #include <asm/current.h>
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 509c89ac5bd..08911ed6649 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -47,7 +47,6 @@
 
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index e1b46bc7e43..a27160ba21d 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1161,8 +1161,8 @@ void disassociate_ctty(int on_exit)
 	tty = get_current_tty();
 	if (tty) {
 		tty_pgrp = get_pid(tty->pgrp);
-		mutex_unlock(&tty_mutex);
 		lock_kernel();
+		mutex_unlock(&tty_mutex);
 		/* XXX: here we race, there is nothing protecting tty */
 		if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
 			tty_vhangup(tty);
@@ -2496,45 +2496,25 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
 }
 
 /**
- *	tiocswinsz		-	implement window size set ioctl
- *	@tty; tty
- *	@arg: user buffer for result
+ *	tty_do_resize		-	resize event
+ *	@tty: tty being resized
+ *	@real_tty: real tty (if using a pty/tty pair)
+ *	@rows: rows (character)
+ *	@cols: cols (character)
  *
- *	Copies the user idea of the window size to the kernel. Traditionally
- *	this is just advisory information but for the Linux console it
- *	actually has driver level meaning and triggers a VC resize.
- *
- *	Locking:
- *		Called function use the console_sem is used to ensure we do
- *	not try and resize the console twice at once.
- *		The tty->termios_mutex is used to ensure we don't double
- *	resize and get confused. Lock order - tty->termios_mutex before
- *	console sem
+ *	Update the termios variables and send the neccessary signals to
+ *	peform a terminal resize correctly
  */
 
-static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
-	struct winsize __user *arg)
+int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+					struct winsize *ws)
 {
-	struct winsize tmp_ws;
 	struct pid *pgrp, *rpgrp;
 	unsigned long flags;
 
-	if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
-		return -EFAULT;
-
 	mutex_lock(&tty->termios_mutex);
-	if (!memcmp(&tmp_ws, &tty->winsize, sizeof(*arg)))
+	if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
 		goto done;
-
-#ifdef CONFIG_VT
-	if (tty->driver->type == TTY_DRIVER_TYPE_CONSOLE) {
-		if (vc_lock_resize(tty->driver_data, tmp_ws.ws_col,
-					tmp_ws.ws_row)) {
-			mutex_unlock(&tty->termios_mutex);
-			return -ENXIO;
-		}
-	}
-#endif
 	/* Get the PID values and reference them so we can
 	   avoid holding the tty ctrl lock while sending signals */
 	spin_lock_irqsave(&tty->ctrl_lock, flags);
@@ -2550,14 +2530,42 @@ static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
 	put_pid(pgrp);
 	put_pid(rpgrp);
 
-	tty->winsize = tmp_ws;
-	real_tty->winsize = tmp_ws;
+	tty->winsize = *ws;
+	real_tty->winsize = *ws;
 done:
 	mutex_unlock(&tty->termios_mutex);
 	return 0;
 }
 
 /**
+ *	tiocswinsz		-	implement window size set ioctl
+ *	@tty; tty
+ *	@arg: user buffer for result
+ *
+ *	Copies the user idea of the window size to the kernel. Traditionally
+ *	this is just advisory information but for the Linux console it
+ *	actually has driver level meaning and triggers a VC resize.
+ *
+ *	Locking:
+ *		Driver dependant. The default do_resize method takes the
+ *	tty termios mutex and ctrl_lock. The console takes its own lock
+ *	then calls into the default method.
+ */
+
+static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
+	struct winsize __user *arg)
+{
+	struct winsize tmp_ws;
+	if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
+		return -EFAULT;
+
+	if (tty->ops->resize)
+		return tty->ops->resize(tty, real_tty, &tmp_ws);
+	else
+		return tty_do_resize(tty, real_tty, &tmp_ws);
+}
+
+/**
  *	tioccons	-	allow admin to move logical console
  *	@file: the file to become console
  *
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 1bc00c9d860..60359c36091 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -803,7 +803,25 @@ static inline int resize_screen(struct vc_data *vc, int width, int height,
  */
 #define VC_RESIZE_MAXCOL (32767)
 #define VC_RESIZE_MAXROW (32767)
-int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
+
+/**
+ *	vc_do_resize	-	resizing method for the tty
+ *	@tty: tty being resized
+ *	@real_tty: real tty (different to tty if a pty/tty pair)
+ *	@vc: virtual console private data
+ *	@cols: columns
+ *	@lines: lines
+ *
+ *	Resize a virtual console, clipping according to the actual constraints.
+ *	If the caller passes a tty structure then update the termios winsize
+ *	information and perform any neccessary signal handling.
+ *
+ *	Caller must hold the console semaphore. Takes the termios mutex and
+ *	ctrl_lock of the tty IFF a tty is passed.
+ */
+
+static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+		struct vc_data *vc, unsigned int cols, unsigned int lines)
 {
 	unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
 	unsigned int old_cols, old_rows, old_row_size, old_screen_size;
@@ -907,24 +925,15 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
 	gotoxy(vc, vc->vc_x, vc->vc_y);
 	save_cur(vc);
 
-	if (vc->vc_tty) {
-		struct winsize ws, *cws = &vc->vc_tty->winsize;
-		struct pid *pgrp = NULL;
-
+	if (tty) {
+		/* Rewrite the requested winsize data with the actual
+		   resulting sizes */
+		struct winsize ws;
 		memset(&ws, 0, sizeof(ws));
 		ws.ws_row = vc->vc_rows;
 		ws.ws_col = vc->vc_cols;
 		ws.ws_ypixel = vc->vc_scan_lines;
-
-		spin_lock_irq(&vc->vc_tty->ctrl_lock);
-		if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col))
-			pgrp = get_pid(vc->vc_tty->pgrp);
-		spin_unlock_irq(&vc->vc_tty->ctrl_lock);
-		if (pgrp) {
-			kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1);
-			put_pid(pgrp);
-		}
-		*cws = ws;
+		tty_do_resize(tty, real_tty, &ws);
 	}
 
 	if (CON_IS_VISIBLE(vc))
@@ -932,14 +941,47 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
 	return err;
 }
 
-int vc_lock_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
+/**
+ *	vc_resize		-	resize a VT
+ *	@vc: virtual console
+ *	@cols: columns
+ *	@rows: rows
+ *
+ *	Resize a virtual console as seen from the console end of things. We
+ *	use the common vc_do_resize methods to update the structures. The
+ *	caller must hold the console sem to protect console internals and
+ *	vc->vc_tty
+ */
+
+int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows)
+{
+	return vc_do_resize(vc->vc_tty, vc->vc_tty, vc, cols, rows);
+}
+
+/**
+ *	vt_resize		-	resize a VT
+ *	@tty: tty to resize
+ *	@real_tty: tty if a pty/tty pair
+ *	@ws: winsize attributes
+ *
+ *	Resize a virtual terminal. This is called by the tty layer as we
+ *	register our own handler for resizing. The mutual helper does all
+ *	the actual work.
+ *
+ *	Takes the console sem and the called methods then take the tty
+ *	termios_mutex and the tty ctrl_lock in that order.
+ */
+
+int vt_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+	struct winsize *ws)
 {
-	int rc;
+	struct vc_data *vc = tty->driver_data;
+	int ret;
 
 	acquire_console_sem();
-	rc = vc_resize(vc, cols, lines);
+	ret = vc_do_resize(tty, real_tty, vc, ws->ws_col, ws->ws_row);
 	release_console_sem();
-	return rc;
+	return ret;
 }
 
 void vc_deallocate(unsigned int currcons)
@@ -2907,6 +2949,7 @@ static const struct tty_operations con_ops = {
 	.start = con_start,
 	.throttle = con_throttle,
 	.unthrottle = con_unthrottle,
+	.resize = vt_resize,
 };
 
 int __init vty_init(void)
@@ -4061,7 +4104,6 @@ EXPORT_SYMBOL(default_blu);
 EXPORT_SYMBOL(update_region);
 EXPORT_SYMBOL(redraw_screen);
 EXPORT_SYMBOL(vc_resize);
-EXPORT_SYMBOL(vc_lock_resize);
 EXPORT_SYMBOL(fg_console);
 EXPORT_SYMBOL(console_blank_hook);
 EXPORT_SYMBOL(console_blanked);
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 3211afd9d57..c904e9ad4a7 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -947,14 +947,16 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 		    get_user(cc, &vtsizes->v_cols))
 			ret = -EFAULT;
 		else {
+			acquire_console_sem();
 			for (i = 0; i < MAX_NR_CONSOLES; i++) {
 				vc = vc_cons[i].d;
 
 				if (vc) {
 					vc->vc_resize_user = 1;
-					vc_lock_resize(vc_cons[i].d, cc, ll);
+					vc_resize(vc_cons[i].d, cc, ll);
 				}
 			}
+			release_console_sem();
 		}
 		break;
 	}
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 8bfee5fb722..278c9857bcf 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -74,7 +74,6 @@
  * currently programmed in the FPGA.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/drivers/cpuidle/governors/ladder.c b/drivers/cpuidle/governors/ladder.c
index ba7b9a6b17a..a4bec3f919a 100644
--- a/drivers/cpuidle/governors/ladder.c
+++ b/drivers/cpuidle/governors/ladder.c
@@ -67,10 +67,17 @@ static int ladder_select_state(struct cpuidle_device *dev)
 	struct ladder_device *ldev = &__get_cpu_var(ladder_devices);
 	struct ladder_device_state *last_state;
 	int last_residency, last_idx = ldev->last_state_idx;
+	int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY);
 
 	if (unlikely(!ldev))
 		return 0;
 
+	/* Special case when user has set very strict latency requirement */
+	if (unlikely(latency_req == 0)) {
+		ladder_do_selection(ldev, last_idx, 0);
+		return 0;
+	}
+
 	last_state = &ldev->states[last_idx];
 
 	if (dev->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID)
@@ -81,8 +88,7 @@ static int ladder_select_state(struct cpuidle_device *dev)
 	/* consider promotion */
 	if (last_idx < dev->state_count - 1 &&
 	    last_residency > last_state->threshold.promotion_time &&
-	    dev->states[last_idx + 1].exit_latency <=
-			pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
+	    dev->states[last_idx + 1].exit_latency <= latency_req) {
 		last_state->stats.promotion_count++;
 		last_state->stats.demotion_count = 0;
 		if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) {
@@ -92,7 +98,19 @@ static int ladder_select_state(struct cpuidle_device *dev)
 	}
 
 	/* consider demotion */
-	if (last_idx > 0 &&
+	if (last_idx > CPUIDLE_DRIVER_STATE_START &&
+	    dev->states[last_idx].exit_latency > latency_req) {
+		int i;
+
+		for (i = last_idx - 1; i > CPUIDLE_DRIVER_STATE_START; i--) {
+			if (dev->states[i].exit_latency <= latency_req)
+				break;
+		}
+		ladder_do_selection(ldev, last_idx, i);
+		return i;
+	}
+
+	if (last_idx > CPUIDLE_DRIVER_STATE_START &&
 	    last_residency < last_state->threshold.demotion_time) {
 		last_state->stats.demotion_count++;
 		last_state->stats.promotion_count = 0;
@@ -117,7 +135,7 @@ static int ladder_enable_device(struct cpuidle_device *dev)
 	struct ladder_device_state *lstate;
 	struct cpuidle_state *state;
 
-	ldev->last_state_idx = 0;
+	ldev->last_state_idx = CPUIDLE_DRIVER_STATE_START;
 
 	for (i = 0; i < dev->state_count; i++) {
 		state = &dev->states[i];
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 78d77c5dc35..8d7cf3f3145 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -34,21 +34,28 @@ static DEFINE_PER_CPU(struct menu_device, menu_devices);
 static int menu_select(struct cpuidle_device *dev)
 {
 	struct menu_device *data = &__get_cpu_var(menu_devices);
+	int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY);
 	int i;
 
+	/* Special case when user has set very strict latency requirement */
+	if (unlikely(latency_req == 0)) {
+		data->last_state_idx = 0;
+		return 0;
+	}
+
 	/* determine the expected residency time */
 	data->expected_us =
 		(u32) ktime_to_ns(tick_nohz_get_sleep_length()) / 1000;
 
 	/* find the deepest idle state that satisfies our constraints */
-	for (i = 1; i < dev->state_count; i++) {
+	for (i = CPUIDLE_DRIVER_STATE_START + 1; i < dev->state_count; i++) {
 		struct cpuidle_state *s = &dev->states[i];
 
 		if (s->target_residency > data->expected_us)
 			break;
 		if (s->target_residency > data->predicted_us)
 			break;
-		if (s->exit_latency > pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY))
+		if (s->exit_latency > latency_req)
 			break;
 	}
 
@@ -67,9 +74,9 @@ static void menu_reflect(struct cpuidle_device *dev)
 {
 	struct menu_device *data = &__get_cpu_var(menu_devices);
 	int last_idx = data->last_state_idx;
-	unsigned int measured_us =
-		cpuidle_get_last_residency(dev) + data->elapsed_us;
+	unsigned int last_idle_us = cpuidle_get_last_residency(dev);
 	struct cpuidle_state *target = &dev->states[last_idx];
+	unsigned int measured_us;
 
 	/*
 	 * Ugh, this idle state doesn't support residency measurements, so we
@@ -77,20 +84,27 @@ static void menu_reflect(struct cpuidle_device *dev)
 	 * for one full standard timer tick.  However, be aware that this
 	 * could potentially result in a suboptimal state transition.
 	 */
-	if (!(target->flags & CPUIDLE_FLAG_TIME_VALID))
-		measured_us = USEC_PER_SEC / HZ;
+	if (unlikely(!(target->flags & CPUIDLE_FLAG_TIME_VALID)))
+		last_idle_us = USEC_PER_SEC / HZ;
+
+	/*
+	 * measured_us and elapsed_us are the cumulative idle time, since the
+	 * last time we were woken out of idle by an interrupt.
+	 */
+	if (data->elapsed_us <= data->elapsed_us + last_idle_us)
+		measured_us = data->elapsed_us + last_idle_us;
+	else
+		measured_us = -1;
+
+	/* Predict time until next break event */
+	data->predicted_us = max(measured_us, data->last_measured_us);
 
-	/* Predict time remaining until next break event */
-	if (measured_us + BREAK_FUZZ < data->expected_us - target->exit_latency) {
-		data->predicted_us = max(measured_us, data->last_measured_us);
+	if (last_idle_us + BREAK_FUZZ <
+	    data->expected_us - target->exit_latency) {
 		data->last_measured_us = measured_us;
 		data->elapsed_us = 0;
 	} else {
-		if (data->elapsed_us < data->elapsed_us + measured_us)
-			data->elapsed_us = measured_us;
-		else
-			data->elapsed_us = -1;
-		data->predicted_us = max(measured_us, data->last_measured_us);
+		data->elapsed_us = measured_us;
 	}
 }
 
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index 31a0e0b455b..97b003839fb 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -21,8 +21,8 @@ static int __init cpuidle_sysfs_setup(char *unused)
 }
 __setup("cpuidle_sysfs_switch", cpuidle_sysfs_setup);
 
-static ssize_t show_available_governors(struct sys_device *dev,
-		struct sysdev_attribute *attr, char *buf)
+static ssize_t show_available_governors(struct sysdev_class *class,
+					char *buf)
 {
 	ssize_t i = 0;
 	struct cpuidle_governor *tmp;
@@ -40,8 +40,8 @@ out:
 	return i;
 }
 
-static ssize_t show_current_driver(struct sys_device *dev,
-		struct sysdev_attribute *attr, char *buf)
+static ssize_t show_current_driver(struct sysdev_class *class,
+				   char *buf)
 {
 	ssize_t ret;
 
@@ -55,8 +55,8 @@ static ssize_t show_current_driver(struct sys_device *dev,
 	return ret;
 }
 
-static ssize_t show_current_governor(struct sys_device *dev,
-			struct sysdev_attribute *attr, char *buf)
+static ssize_t show_current_governor(struct sysdev_class *class,
+				     char *buf)
 {
 	ssize_t ret;
 
@@ -70,9 +70,8 @@ static ssize_t show_current_governor(struct sys_device *dev,
 	return ret;
 }
 
-static ssize_t store_current_governor(struct sys_device *dev,
-	struct sysdev_attribute *attr,
-	const char *buf, size_t count)
+static ssize_t store_current_governor(struct sysdev_class *class,
+				      const char *buf, size_t count)
 {
 	char gov_name[CPUIDLE_NAME_LEN];
 	int ret = -EINVAL;
@@ -104,8 +103,9 @@ static ssize_t store_current_governor(struct sys_device *dev,
 		return count;
 }
 
-static SYSDEV_ATTR(current_driver, 0444, show_current_driver, NULL);
-static SYSDEV_ATTR(current_governor_ro, 0444, show_current_governor, NULL);
+static SYSDEV_CLASS_ATTR(current_driver, 0444, show_current_driver, NULL);
+static SYSDEV_CLASS_ATTR(current_governor_ro, 0444, show_current_governor,
+			 NULL);
 
 static struct attribute *cpuclass_default_attrs[] = {
 	&attr_current_driver.attr,
@@ -113,9 +113,10 @@ static struct attribute *cpuclass_default_attrs[] = {
 	NULL
 };
 
-static SYSDEV_ATTR(available_governors, 0444, show_available_governors, NULL);
-static SYSDEV_ATTR(current_governor, 0644, show_current_governor,
-	store_current_governor);
+static SYSDEV_CLASS_ATTR(available_governors, 0444, show_available_governors,
+			 NULL);
+static SYSDEV_CLASS_ATTR(current_governor, 0644, show_current_governor,
+			 store_current_governor);
 
 static struct attribute *cpuclass_switch_attrs[] = {
 	&attr_available_governors.attr,
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 54a2a166e56..bf2917d197a 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <asm/byteorder.h>
+#include <asm/i387.h>
 #include "padlock.h"
 
 /* Control word. */
@@ -141,6 +142,12 @@ static inline void padlock_reset_key(void)
 	asm volatile ("pushfl; popfl");
 }
 
+/*
+ * While the padlock instructions don't use FP/SSE registers, they
+ * generate a spurious DNA fault when cr0.ts is '1'. These instructions
+ * should be used only inside the irq_ts_save/restore() context
+ */
+
 static inline void padlock_xcrypt(const u8 *input, u8 *output, void *key,
 				  void *control_word)
 {
@@ -205,15 +212,23 @@ static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key,
 static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
 	struct aes_ctx *ctx = aes_ctx(tfm);
+	int ts_state;
 	padlock_reset_key();
+
+	ts_state = irq_ts_save();
 	aes_crypt(in, out, ctx->E, &ctx->cword.encrypt);
+	irq_ts_restore(ts_state);
 }
 
 static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
 	struct aes_ctx *ctx = aes_ctx(tfm);
+	int ts_state;
 	padlock_reset_key();
+
+	ts_state = irq_ts_save();
 	aes_crypt(in, out, ctx->D, &ctx->cword.decrypt);
+	irq_ts_restore(ts_state);
 }
 
 static struct crypto_alg aes_alg = {
@@ -244,12 +259,14 @@ static int ecb_aes_encrypt(struct blkcipher_desc *desc,
 	struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 	int err;
+	int ts_state;
 
 	padlock_reset_key();
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
+	ts_state = irq_ts_save();
 	while ((nbytes = walk.nbytes)) {
 		padlock_xcrypt_ecb(walk.src.virt.addr, walk.dst.virt.addr,
 				   ctx->E, &ctx->cword.encrypt,
@@ -257,6 +274,7 @@ static int ecb_aes_encrypt(struct blkcipher_desc *desc,
 		nbytes &= AES_BLOCK_SIZE - 1;
 		err = blkcipher_walk_done(desc, &walk, nbytes);
 	}
+	irq_ts_restore(ts_state);
 
 	return err;
 }
@@ -268,12 +286,14 @@ static int ecb_aes_decrypt(struct blkcipher_desc *desc,
 	struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 	int err;
+	int ts_state;
 
 	padlock_reset_key();
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
+	ts_state = irq_ts_save();
 	while ((nbytes = walk.nbytes)) {
 		padlock_xcrypt_ecb(walk.src.virt.addr, walk.dst.virt.addr,
 				   ctx->D, &ctx->cword.decrypt,
@@ -281,7 +301,7 @@ static int ecb_aes_decrypt(struct blkcipher_desc *desc,
 		nbytes &= AES_BLOCK_SIZE - 1;
 		err = blkcipher_walk_done(desc, &walk, nbytes);
 	}
-
+	irq_ts_restore(ts_state);
 	return err;
 }
 
@@ -314,12 +334,14 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
 	struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 	int err;
+	int ts_state;
 
 	padlock_reset_key();
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
+	ts_state = irq_ts_save();
 	while ((nbytes = walk.nbytes)) {
 		u8 *iv = padlock_xcrypt_cbc(walk.src.virt.addr,
 					    walk.dst.virt.addr, ctx->E,
@@ -329,6 +351,7 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
 		nbytes &= AES_BLOCK_SIZE - 1;
 		err = blkcipher_walk_done(desc, &walk, nbytes);
 	}
+	irq_ts_restore(ts_state);
 
 	return err;
 }
@@ -340,12 +363,14 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
 	struct aes_ctx *ctx = blk_aes_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 	int err;
+	int ts_state;
 
 	padlock_reset_key();
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
+	ts_state = irq_ts_save();
 	while ((nbytes = walk.nbytes)) {
 		padlock_xcrypt_cbc(walk.src.virt.addr, walk.dst.virt.addr,
 				   ctx->D, walk.iv, &ctx->cword.decrypt,
@@ -354,6 +379,7 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
 		err = blkcipher_walk_done(desc, &walk, nbytes);
 	}
 
+	irq_ts_restore(ts_state);
 	return err;
 }
 
diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c
index 40d5680fa01..a7fbadebf62 100644
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/scatterlist.h>
+#include <asm/i387.h>
 #include "padlock.h"
 
 #define SHA1_DEFAULT_FALLBACK	"sha1-generic"
@@ -102,6 +103,7 @@ static void padlock_do_sha1(const char *in, char *out, int count)
 	 *     PadLock microcode needs it that big. */
 	char buf[128+16];
 	char *result = NEAREST_ALIGNED(buf);
+	int ts_state;
 
 	((uint32_t *)result)[0] = SHA1_H0;
 	((uint32_t *)result)[1] = SHA1_H1;
@@ -109,9 +111,12 @@ static void padlock_do_sha1(const char *in, char *out, int count)
 	((uint32_t *)result)[3] = SHA1_H3;
 	((uint32_t *)result)[4] = SHA1_H4;
  
+	/* prevent taking the spurious DNA fault with padlock. */
+	ts_state = irq_ts_save();
 	asm volatile (".byte 0xf3,0x0f,0xa6,0xc8" /* rep xsha1 */
 		      : "+S"(in), "+D"(result)
 		      : "c"(count), "a"(0));
+	irq_ts_restore(ts_state);
 
 	padlock_output_block((uint32_t *)result, (uint32_t *)out, 5);
 }
@@ -123,6 +128,7 @@ static void padlock_do_sha256(const char *in, char *out, int count)
 	 *     PadLock microcode needs it that big. */
 	char buf[128+16];
 	char *result = NEAREST_ALIGNED(buf);
+	int ts_state;
 
 	((uint32_t *)result)[0] = SHA256_H0;
 	((uint32_t *)result)[1] = SHA256_H1;
@@ -133,9 +139,12 @@ static void padlock_do_sha256(const char *in, char *out, int count)
 	((uint32_t *)result)[6] = SHA256_H6;
 	((uint32_t *)result)[7] = SHA256_H7;
 
+	/* prevent taking the spurious DNA fault with padlock. */
+	ts_state = irq_ts_save();
 	asm volatile (".byte 0xf3,0x0f,0xa6,0xd0" /* rep xsha256 */
 		      : "+S"(in), "+D"(result)
 		      : "c"(count), "a"(0));
+	irq_ts_restore(ts_state);
 
 	padlock_output_block((uint32_t *)result, (uint32_t *)out, 8);
 }
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 681c15f4208..ee827a7f7c6 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -96,6 +96,9 @@ struct talitos_private {
 	unsigned int exec_units;
 	unsigned int desc_types;
 
+	/* SEC Compatibility info */
+	unsigned long features;
+
 	/* next channel to be assigned next incoming descriptor */
 	atomic_t last_chan;
 
@@ -133,6 +136,9 @@ struct talitos_private {
 	struct hwrng rng;
 };
 
+/* .features flag */
+#define TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT 0x00000001
+
 /*
  * map virtual single (contiguous) pointer to h/w descriptor pointer
  */
@@ -785,7 +791,7 @@ static void ipsec_esp_encrypt_done(struct device *dev,
 	/* copy the generated ICV to dst */
 	if (edesc->dma_len) {
 		icvdata = &edesc->link_tbl[edesc->src_nents +
-					   edesc->dst_nents + 1];
+					   edesc->dst_nents + 2];
 		sg = sg_last(areq->dst, edesc->dst_nents);
 		memcpy((char *)sg_virt(sg) + sg->length - ctx->authsize,
 		       icvdata, ctx->authsize);
@@ -814,7 +820,7 @@ static void ipsec_esp_decrypt_done(struct device *dev,
 		/* auth check */
 		if (edesc->dma_len)
 			icvdata = &edesc->link_tbl[edesc->src_nents +
-						   edesc->dst_nents + 1];
+						   edesc->dst_nents + 2];
 		else
 			icvdata = &edesc->link_tbl[0];
 
@@ -921,10 +927,30 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 		sg_count = sg_to_link_tbl(areq->src, sg_count, cryptlen,
 					  &edesc->link_tbl[0]);
 		if (sg_count > 1) {
+			struct talitos_ptr *link_tbl_ptr =
+				&edesc->link_tbl[sg_count-1];
+			struct scatterlist *sg;
+			struct talitos_private *priv = dev_get_drvdata(dev);
+
 			desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP;
 			desc->ptr[4].ptr = cpu_to_be32(edesc->dma_link_tbl);
 			dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
 						   edesc->dma_len, DMA_BIDIRECTIONAL);
+			/* If necessary for this SEC revision,
+			 * add a link table entry for ICV.
+			 */
+			if ((priv->features &
+			     TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT) &&
+			    (edesc->desc.hdr & DESC_HDR_MODE0_ENCRYPT) == 0) {
+				link_tbl_ptr->j_extent = 0;
+				link_tbl_ptr++;
+				link_tbl_ptr->j_extent = DESC_PTR_LNKTBL_RETURN;
+				link_tbl_ptr->len = cpu_to_be16(authsize);
+				sg = sg_last(areq->src, edesc->src_nents ? : 1);
+				link_tbl_ptr->ptr = cpu_to_be32(
+						(char *)sg_dma_address(sg)
+						+ sg->length - authsize);
+			}
 		} else {
 			/* Only one segment now, so no link tbl needed */
 			desc->ptr[4].ptr = cpu_to_be32(sg_dma_address(areq->src));
@@ -944,12 +970,11 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 		desc->ptr[5].ptr = cpu_to_be32(sg_dma_address(areq->dst));
 	} else {
 		struct talitos_ptr *link_tbl_ptr =
-			&edesc->link_tbl[edesc->src_nents];
-		struct scatterlist *sg;
+			&edesc->link_tbl[edesc->src_nents + 1];
 
 		desc->ptr[5].ptr = cpu_to_be32((struct talitos_ptr *)
 					       edesc->dma_link_tbl +
-					       edesc->src_nents);
+					       edesc->src_nents + 1);
 		if (areq->src == areq->dst) {
 			memcpy(link_tbl_ptr, &edesc->link_tbl[0],
 			       edesc->src_nents * sizeof(struct talitos_ptr));
@@ -957,14 +982,10 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 			sg_count = sg_to_link_tbl(areq->dst, sg_count, cryptlen,
 						  link_tbl_ptr);
 		}
+		/* Add an entry to the link table for ICV data */
 		link_tbl_ptr += sg_count - 1;
-
-		/* handle case where sg_last contains the ICV exclusively */
-		sg = sg_last(areq->dst, edesc->dst_nents);
-		if (sg->length == ctx->authsize)
-			link_tbl_ptr--;
-
 		link_tbl_ptr->j_extent = 0;
+		sg_count++;
 		link_tbl_ptr++;
 		link_tbl_ptr->j_extent = DESC_PTR_LNKTBL_RETURN;
 		link_tbl_ptr->len = cpu_to_be16(authsize);
@@ -973,7 +994,7 @@ static int ipsec_esp(struct ipsec_esp_edesc *edesc, struct aead_request *areq,
 		link_tbl_ptr->ptr = cpu_to_be32((struct talitos_ptr *)
 						edesc->dma_link_tbl +
 					        edesc->src_nents +
-						edesc->dst_nents + 1);
+						edesc->dst_nents + 2);
 
 		desc->ptr[5].j_extent |= DESC_PTR_LNKTBL_JUMP;
 		dma_sync_single_for_device(ctx->dev, edesc->dma_link_tbl,
@@ -1040,12 +1061,12 @@ static struct ipsec_esp_edesc *ipsec_esp_edesc_alloc(struct aead_request *areq,
 
 	/*
 	 * allocate space for base edesc plus the link tables,
-	 * allowing for a separate entry for the generated ICV (+ 1),
+	 * allowing for two separate entries for ICV and generated ICV (+ 2),
 	 * and the ICV data itself
 	 */
 	alloc_len = sizeof(struct ipsec_esp_edesc);
 	if (src_nents || dst_nents) {
-		dma_len = (src_nents + dst_nents + 1) *
+		dma_len = (src_nents + dst_nents + 2) *
 				 sizeof(struct talitos_ptr) + ctx->authsize;
 		alloc_len += dma_len;
 	} else {
@@ -1104,7 +1125,7 @@ static int aead_authenc_decrypt(struct aead_request *req)
 	/* stash incoming ICV for later cmp with ICV generated by the h/w */
 	if (edesc->dma_len)
 		icvdata = &edesc->link_tbl[edesc->src_nents +
-					   edesc->dst_nents + 1];
+					   edesc->dst_nents + 2];
 	else
 		icvdata = &edesc->link_tbl[0];
 
@@ -1480,6 +1501,9 @@ static int talitos_probe(struct of_device *ofdev,
 		goto err_out;
 	}
 
+	if (of_device_is_compatible(np, "fsl,sec3.0"))
+		priv->features |= TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT;
+
 	priv->head_lock = kmalloc(sizeof(spinlock_t) * priv->num_channels,
 				  GFP_KERNEL);
 	priv->tail_lock = kmalloc(sizeof(spinlock_t) * priv->num_channels,
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index a4e4494663b..0328da020a1 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/memory.h>
-#include <asm/plat-orion/mv_xor.h>
+#include <plat/mv_xor.h>
 #include "mv_xor.h"
 
 static void mv_xor_issue_pending(struct dma_chan *chan);
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
index 001622eb86f..3bf8ee120d4 100644
--- a/drivers/firmware/memmap.c
+++ b/drivers/firmware/memmap.c
@@ -84,20 +84,23 @@ static struct kobj_type memmap_ktype = {
  */
 
 /*
- * Firmware memory map entries
+ * Firmware memory map entries. No locking is needed because the
+ * firmware_map_add() and firmware_map_add_early() functions are called
+ * in firmware initialisation code in one single thread of execution.
  */
 static LIST_HEAD(map_entries);
 
 /**
- * Common implementation of firmware_map_add() and firmware_map_add_early()
- * which expects a pre-allocated struct firmware_map_entry.
- *
+ * firmware_map_add_entry() - Does the real work to add a firmware memmap entry.
  * @start: Start of the memory range.
  * @end:   End of the memory range (inclusive).
  * @type:  Type of the memory range.
  * @entry: Pre-allocated (either kmalloc() or bootmem allocator), uninitialised
  *         entry.
- */
+ *
+ * Common implementation of firmware_map_add() and firmware_map_add_early()
+ * which expects a pre-allocated struct firmware_map_entry.
+ **/
 static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
 				  const char *type,
 				  struct firmware_map_entry *entry)
@@ -115,33 +118,52 @@ static int firmware_map_add_entry(resource_size_t start, resource_size_t end,
 	return 0;
 }
 
-/*
- * See <linux/firmware-map.h> for documentation.
- */
+/**
+ * firmware_map_add() - Adds a firmware mapping entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (inclusive).
+ * @type:  Type of the memory range.
+ *
+ * This function uses kmalloc() for memory
+ * allocation. Use firmware_map_add_early() if you want to use the bootmem
+ * allocator.
+ *
+ * That function must be called before late_initcall.
+ *
+ * Returns 0 on success, or -ENOMEM if no memory could be allocated.
+ **/
 int firmware_map_add(resource_size_t start, resource_size_t end,
 		     const char *type)
 {
 	struct firmware_map_entry *entry;
 
 	entry = kmalloc(sizeof(struct firmware_map_entry), GFP_ATOMIC);
-	WARN_ON(!entry);
 	if (!entry)
 		return -ENOMEM;
 
 	return firmware_map_add_entry(start, end, type, entry);
 }
 
-/*
- * See <linux/firmware-map.h> for documentation.
- */
+/**
+ * firmware_map_add_early() - Adds a firmware mapping entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (inclusive).
+ * @type:  Type of the memory range.
+ *
+ * Adds a firmware mapping entry. This function uses the bootmem allocator
+ * for memory allocation. Use firmware_map_add() if you want to use kmalloc().
+ *
+ * That function must be called before late_initcall.
+ *
+ * Returns 0 on success, or -ENOMEM if no memory could be allocated.
+ **/
 int __init firmware_map_add_early(resource_size_t start, resource_size_t end,
 				  const char *type)
 {
 	struct firmware_map_entry *entry;
 
 	entry = alloc_bootmem_low(sizeof(struct firmware_map_entry));
-	WARN_ON(!entry);
-	if (!entry)
+	if (WARN_ON(!entry))
 		return -ENOMEM;
 
 	return firmware_map_add_entry(start, end, type, entry);
@@ -183,7 +205,10 @@ static ssize_t memmap_attr_show(struct kobject *kobj,
 /*
  * Initialises stuff and adds the entries in the map_entries list to
  * sysfs. Important is that firmware_map_add() and firmware_map_add_early()
- * must be called before late_initcall.
+ * must be called before late_initcall. That's just because that function
+ * is called as late_initcall() function, which means that if you call
+ * firmware_map_add() or firmware_map_add_early() afterwards, the entries
+ * are not added to sysfs.
  */
 static int __init memmap_init(void)
 {
@@ -192,13 +217,13 @@ static int __init memmap_init(void)
 	struct kset *memmap_kset;
 
 	memmap_kset = kset_create_and_add("memmap", NULL, firmware_kobj);
-	WARN_ON(!memmap_kset);
-	if (!memmap_kset)
+	if (WARN_ON(!memmap_kset))
 		return -ENOMEM;
 
 	list_for_each_entry(entry, &map_entries, list) {
 		entry->kobj.kset = memmap_kset;
-		kobject_add(&entry->kobj, NULL, "%d", i++);
+		if (kobject_add(&entry->kobj, NULL, "%d", i++))
+			kobject_put(&entry->kobj);
 	}
 
 	return 0;
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 61e78a4369b..b15f8824963 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -654,12 +654,12 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE},
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE},
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE},
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN  | HID_QUIRK_IGNORE_MOUSE },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
 
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index bf4ebfb86fa..d402e8d813c 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -77,6 +77,22 @@ config SENSORS_AD7418
 	  This driver can also be built as a module. If so, the module
 	  will be called ad7418.
 
+config SENSORS_ADCXX
+	tristate "National Semiconductor ADCxxxSxxx"
+	depends on SPI_MASTER && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  ADC<bb><c>S<sss> chip family, where
+	  * bb  is the resolution in number of bits (8, 10, 12)
+	  * c   is the number of channels (1, 2, 4, 8)
+	  * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+	    kSPS and 101 for 1 MSPS)
+
+	  Examples : ADC081S101, ADC124S501, ...
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called adcxx.
+
 config SENSORS_ADM1021
 	tristate "Analog Devices ADM1021 and compatibles"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 7943e5cefb0..950134ab842 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_SENSORS_ABITUGURU)	+= abituguru.o
 obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
 obj-$(CONFIG_SENSORS_AD7414)	+= ad7414.o
 obj-$(CONFIG_SENSORS_AD7418)	+= ad7418.o
+obj-$(CONFIG_SENSORS_ADCXX)	+= adcxx.o
 obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
 obj-$(CONFIG_SENSORS_ADM1025)	+= adm1025.o
 obj-$(CONFIG_SENSORS_ADM1026)	+= adm1026.o
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index f00f497b9ca..d568c65c137 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -1,5 +1,8 @@
 /*
-    abituguru3.c Copyright (c) 2006 Hans de Goede <j.w.r.degoede@hhs.nl>
+    abituguru3.c
+
+    Copyright (c) 2006-2008 Hans de Goede <j.w.r.degoede@hhs.nl>
+    Copyright (c) 2008 Alistair John Strachan <alistair@devzero.co.uk>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -116,7 +119,7 @@ struct abituguru3_sensor_info {
 
 struct abituguru3_motherboard_info {
 	u16 id;
-	const char *name;
+	const char *dmi_name;
 	/* + 1 -> end of sensors indicated by a sensor with name == NULL */
 	struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1];
 };
@@ -161,7 +164,7 @@ struct abituguru3_data {
 
 /* Constants */
 static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
-	{ 0x000C, "unknown", {
+	{ 0x000C, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -183,7 +186,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX1 Fan",		35, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x000D, "Abit AW8", {
+	{ 0x000D, NULL /* Abit AW8, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -212,7 +215,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX5 Fan",		39, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x000E, "AL-8", {
+	{ 0x000E, NULL /* AL-8, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -233,7 +236,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "SYS Fan",		34, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x000F, "unknown", {
+	{ 0x000F, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -254,7 +257,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "SYS Fan",		34, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0010, "Abit NI8 SLI GR", {
+	{ 0x0010, NULL /* Abit NI8 SLI GR, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -276,7 +279,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "OTES1 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0011, "Abit AT8 32X", {
+	{ 0x0011, NULL /* Abit AT8 32X, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -302,7 +305,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX2 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0012, "Abit AN8 32X", {
+	{ 0x0012, NULL /* Abit AN8 32X, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -324,7 +327,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX1 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0013, "Abit AW8D", {
+	{ 0x0013, NULL /* Abit AW8D, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -353,7 +356,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX5 Fan",		39, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0014, "Abit AB9 Pro", {
+	{ 0x0014, NULL /* Abit AB9 Pro, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -374,7 +377,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "SYS Fan",		34, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0015, "unknown", {
+	{ 0x0015, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -398,7 +401,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0016, "AW9D-MAX", {
+	{ 0x0016, NULL /* AW9D-MAX, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -426,7 +429,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "OTES1 Fan",		38, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0017, "unknown", {
+	{ 0x0017, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -451,7 +454,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 FAN",		37, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0018, "unknown", {
+	{ 0x0018, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -478,7 +481,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0019, "unknown", {
+	{ 0x0019, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 7, 0, 10, 1, 0 },
 		{ "DDR2",		13, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		14, 0, 10, 1, 0 },
@@ -505,7 +508,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 FAN",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001A, "Abit IP35 Pro", {
+	{ 0x001A, "IP35 Pro(Intel P35-ICH9R)", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -533,7 +536,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX4 Fan",		37, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001B, "unknown", {
+	{ 0x001B, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR3",		 1, 0, 20, 1, 0 },
 		{ "DDR3 VTT",		 2, 0, 10, 1, 0 },
@@ -560,7 +563,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001C, "unknown", {
+	{ 0x001C, NULL /* Unknown, need DMI string */, {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -935,9 +938,18 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
 		goto abituguru3_probe_error;
 	}
 	data->sensors = abituguru3_motherboards[i].sensors;
+
 	printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard "
-		"ID: %04X (%s)\n", (unsigned int)id,
-		abituguru3_motherboards[i].name);
+		"ID: %04X\n", (unsigned int)id);
+
+#ifdef CONFIG_DMI
+	if (!abituguru3_motherboards[i].dmi_name) {
+		printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
+			"not detected using DMI. Please send the output of "
+			"\"dmidecode\" to the abituguru3 maintainer"
+			"(see MAINTAINERS)\n");
+	}
+#endif
 
 	/* Fill the sysfs attr array */
 	sysfs_attr_i = 0;
@@ -1109,6 +1121,46 @@ static struct platform_driver abituguru3_driver = {
 	.resume = abituguru3_resume
 };
 
+#ifdef CONFIG_DMI
+
+static int __init abituguru3_dmi_detect(void)
+{
+	const char *board_vendor, *board_name;
+	int i, err = (force) ? 1 : -ENODEV;
+
+	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+	if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))
+		return err;
+
+	board_name = dmi_get_system_info(DMI_BOARD_NAME);
+	if (!board_name)
+		return err;
+
+	for (i = 0; abituguru3_motherboards[i].id; i++) {
+		const char *dmi_name = abituguru3_motherboards[i].dmi_name;
+		if (dmi_name && !strcmp(dmi_name, board_name))
+			break;
+	}
+
+	if (!abituguru3_motherboards[i].id)
+		return 1;
+
+	return 0;
+}
+
+#else /* !CONFIG_DMI */
+
+static inline int abituguru3_dmi_detect(void)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_DMI */
+
+/* FIXME: Manual detection should die eventually; we need to collect stable
+ *        DMI model names first before we can rely entirely on CONFIG_DMI.
+ */
+
 static int __init abituguru3_detect(void)
 {
 	/* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
@@ -1119,7 +1171,7 @@ static int __init abituguru3_detect(void)
 	if (((data_val == 0x00) || (data_val == 0x08)) &&
 			((cmd_val == 0xAC) || (cmd_val == 0x05) ||
 			 (cmd_val == 0x55)))
-		return ABIT_UGURU3_BASE;
+		return 0;
 
 	ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
 		"0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val);
@@ -1127,7 +1179,7 @@ static int __init abituguru3_detect(void)
 	if (force) {
 		printk(KERN_INFO ABIT_UGURU3_NAME ": Assuming Abit uGuru3 is "
 				"present because of \"force\" parameter\n");
-		return ABIT_UGURU3_BASE;
+		return 0;
 	}
 
 	/* No uGuru3 found */
@@ -1138,27 +1190,29 @@ static struct platform_device *abituguru3_pdev;
 
 static int __init abituguru3_init(void)
 {
-	int address, err;
 	struct resource res = { .flags = IORESOURCE_IO };
-
-#ifdef CONFIG_DMI
-	const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
-
-	/* safety check, refuse to load on non Abit motherboards */
-	if (!force && (!board_vendor ||
-			strcmp(board_vendor, "http://www.abit.com.tw/")))
-		return -ENODEV;
-#endif
-
-	address = abituguru3_detect();
-	if (address < 0)
-		return address;
+	int err;
+
+	/* Attempt DMI detection first */
+	err = abituguru3_dmi_detect();
+	if (err < 0)
+		return err;
+
+	/* Fall back to manual detection if there was no exact
+	 * board name match, or force was specified.
+	 */
+	if (err > 0) {
+		err = abituguru3_detect();
+		if (err)
+			return err;
+	}
 
 	err = platform_driver_register(&abituguru3_driver);
 	if (err)
 		goto exit;
 
-	abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME, address);
+	abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME,
+						ABIT_UGURU3_BASE);
 	if (!abituguru3_pdev) {
 		printk(KERN_ERR ABIT_UGURU3_NAME
 			": Device allocation failed\n");
@@ -1166,8 +1220,8 @@ static int __init abituguru3_init(void)
 		goto exit_driver_unregister;
 	}
 
-	res.start = address;
-	res.end = address + ABIT_UGURU3_REGION_LENGTH - 1;
+	res.start = ABIT_UGURU3_BASE;
+	res.end = ABIT_UGURU3_BASE + ABIT_UGURU3_REGION_LENGTH - 1;
 	res.name = ABIT_UGURU3_NAME;
 
 	err = platform_device_add_resources(abituguru3_pdev, &res, 1);
diff --git a/drivers/hwmon/adcxx.c b/drivers/hwmon/adcxx.c
new file mode 100644
index 00000000000..242294db3db
--- /dev/null
+++ b/drivers/hwmon/adcxx.c
@@ -0,0 +1,329 @@
+/*
+ * adcxx.c
+ *
+ * The adcxx4s is an AD converter family from National Semiconductor (NS).
+ *
+ * Copyright (c) 2008 Marc Pignat <marc.pignat@hevs.ch>
+ *
+ * The adcxx4s communicates with a host processor via an SPI/Microwire Bus
+ * interface. This driver supports the whole family of devices with name
+ * ADC<bb><c>S<sss>, where
+ * * bb is the resolution in number of bits (8, 10, 12)
+ * * c is the number of channels (1, 2, 4, 8)
+ * * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS
+ *   and 101 for 1 MSPS)
+ *
+ * Complete datasheets are available at National's website here:
+ * http://www.national.com/ds/DC/ADC<bb><c>S<sss>.pdf
+ *
+ * Handling of 8, 10 and 12 bits converters are the same, the
+ * unavailable bits are 0 :)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+
+#define DRVNAME		"adcxx"
+
+struct adcxx {
+	struct device *hwmon_dev;
+	struct mutex lock;
+	u32 channels;
+	u32 reference; /* in millivolts */
+};
+
+/* sysfs hook function */
+static ssize_t adcxx_read(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+	u8 tx_buf[2] = { attr->index << 3 }; /* other bits are don't care */
+	u8 rx_buf[2];
+	int status;
+	int value;
+
+	if (mutex_lock_interruptible(&adc->lock))
+		return -ERESTARTSYS;
+
+	status = spi_write_then_read(spi, tx_buf, sizeof(tx_buf),
+					rx_buf, sizeof(rx_buf));
+	if (status < 0) {
+		dev_warn(dev, "spi_write_then_read failed with status %d\n",
+				status);
+		goto out;
+	}
+
+	value = (rx_buf[0] << 8) + rx_buf[1];
+	dev_dbg(dev, "raw value = 0x%x\n", value);
+
+	value = value * adc->reference >> 12;
+	status = sprintf(buf, "%d\n", value);
+out:
+	mutex_unlock(&adc->lock);
+	return status;
+}
+
+static ssize_t adcxx_show_min(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	/* The minimum reference is 0 for this chip family */
+	return sprintf(buf, "0\n");
+}
+
+static ssize_t adcxx_show_max(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+	u32 reference;
+
+	if (mutex_lock_interruptible(&adc->lock))
+		return -ERESTARTSYS;
+
+	reference = adc->reference;
+
+	mutex_unlock(&adc->lock);
+
+	return sprintf(buf, "%d\n", reference);
+}
+
+static ssize_t adcxx_set_max(struct device *dev,
+	struct device_attribute *devattr, const char *buf, size_t count)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+	unsigned long value;
+
+	if (strict_strtoul(buf, 10, &value))
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&adc->lock))
+		return -ERESTARTSYS;
+
+	adc->reference = value;
+
+	mutex_unlock(&adc->lock);
+
+	return count;
+}
+
+static ssize_t adcxx_show_name(struct device *dev, struct device_attribute
+			      *devattr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+
+	return sprintf(buf, "adcxx%ds\n", adc->channels);
+}
+
+static struct sensor_device_attribute ad_input[] = {
+	SENSOR_ATTR(name, S_IRUGO, adcxx_show_name, NULL, 0),
+	SENSOR_ATTR(in_min, S_IRUGO, adcxx_show_min, NULL, 0),
+	SENSOR_ATTR(in_max, S_IWUSR | S_IRUGO, adcxx_show_max,
+					adcxx_set_max, 0),
+	SENSOR_ATTR(in0_input, S_IRUGO, adcxx_read, NULL, 0),
+	SENSOR_ATTR(in1_input, S_IRUGO, adcxx_read, NULL, 1),
+	SENSOR_ATTR(in2_input, S_IRUGO, adcxx_read, NULL, 2),
+	SENSOR_ATTR(in3_input, S_IRUGO, adcxx_read, NULL, 3),
+	SENSOR_ATTR(in4_input, S_IRUGO, adcxx_read, NULL, 4),
+	SENSOR_ATTR(in5_input, S_IRUGO, adcxx_read, NULL, 5),
+	SENSOR_ATTR(in6_input, S_IRUGO, adcxx_read, NULL, 6),
+	SENSOR_ATTR(in7_input, S_IRUGO, adcxx_read, NULL, 7),
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit adcxx_probe(struct spi_device *spi, int channels)
+{
+	struct adcxx *adc;
+	int status;
+	int i;
+
+	adc = kzalloc(sizeof *adc, GFP_KERNEL);
+	if (!adc)
+		return -ENOMEM;
+
+	/* set a default value for the reference */
+	adc->reference = 3300;
+	adc->channels = channels;
+	mutex_init(&adc->lock);
+
+	mutex_lock(&adc->lock);
+
+	dev_set_drvdata(&spi->dev, adc);
+
+	for (i = 0; i < 3 + adc->channels; i++) {
+		status = device_create_file(&spi->dev, &ad_input[i].dev_attr);
+		if (status) {
+			dev_err(&spi->dev, "device_create_file failed.\n");
+			goto out_err;
+		}
+	}
+
+	adc->hwmon_dev = hwmon_device_register(&spi->dev);
+	if (IS_ERR(adc->hwmon_dev)) {
+		dev_err(&spi->dev, "hwmon_device_register failed.\n");
+		status = PTR_ERR(adc->hwmon_dev);
+		goto out_err;
+	}
+
+	mutex_unlock(&adc->lock);
+	return 0;
+
+out_err:
+	for (i--; i >= 0; i--)
+		device_remove_file(&spi->dev, &ad_input[i].dev_attr);
+
+	dev_set_drvdata(&spi->dev, NULL);
+	mutex_unlock(&adc->lock);
+	kfree(adc);
+	return status;
+}
+
+static int __devinit adcxx1s_probe(struct spi_device *spi)
+{
+	return adcxx_probe(spi, 1);
+}
+
+static int __devinit adcxx2s_probe(struct spi_device *spi)
+{
+	return adcxx_probe(spi, 2);
+}
+
+static int __devinit adcxx4s_probe(struct spi_device *spi)
+{
+	return adcxx_probe(spi, 4);
+}
+
+static int __devinit adcxx8s_probe(struct spi_device *spi)
+{
+	return adcxx_probe(spi, 8);
+}
+
+static int __devexit adcxx_remove(struct spi_device *spi)
+{
+	struct adcxx *adc = dev_get_drvdata(&spi->dev);
+	int i;
+
+	mutex_lock(&adc->lock);
+	hwmon_device_unregister(adc->hwmon_dev);
+	for (i = 0; i < 3 + adc->channels; i++)
+		device_remove_file(&spi->dev, &ad_input[i].dev_attr);
+
+	dev_set_drvdata(&spi->dev, NULL);
+	mutex_unlock(&adc->lock);
+	kfree(adc);
+
+	return 0;
+}
+
+static struct spi_driver adcxx1s_driver = {
+	.driver = {
+		.name	= "adcxx1s",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= adcxx1s_probe,
+	.remove	= __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx2s_driver = {
+	.driver = {
+		.name	= "adcxx2s",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= adcxx2s_probe,
+	.remove	= __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx4s_driver = {
+	.driver = {
+		.name	= "adcxx4s",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= adcxx4s_probe,
+	.remove	= __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx8s_driver = {
+	.driver = {
+		.name	= "adcxx8s",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= adcxx8s_probe,
+	.remove	= __devexit_p(adcxx_remove),
+};
+
+static int __init init_adcxx(void)
+{
+	int status;
+	status = spi_register_driver(&adcxx1s_driver);
+	if (status)
+		goto reg_1_failed;
+
+	status = spi_register_driver(&adcxx2s_driver);
+	if (status)
+		goto reg_2_failed;
+
+	status = spi_register_driver(&adcxx4s_driver);
+	if (status)
+		goto reg_4_failed;
+
+	status = spi_register_driver(&adcxx8s_driver);
+	if (status)
+		goto reg_8_failed;
+
+	return status;
+
+reg_8_failed:
+	spi_unregister_driver(&adcxx4s_driver);
+reg_4_failed:
+	spi_unregister_driver(&adcxx2s_driver);
+reg_2_failed:
+	spi_unregister_driver(&adcxx1s_driver);
+reg_1_failed:
+	return status;
+}
+
+static void __exit exit_adcxx(void)
+{
+	spi_unregister_driver(&adcxx1s_driver);
+	spi_unregister_driver(&adcxx2s_driver);
+	spi_unregister_driver(&adcxx4s_driver);
+	spi_unregister_driver(&adcxx8s_driver);
+}
+
+module_init(init_adcxx);
+module_exit(exit_adcxx);
+
+MODULE_AUTHOR("Marc Pignat");
+MODULE_DESCRIPTION("National Semiconductor adcxx8sxxx Linux driver");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("adcxx1s");
+MODULE_ALIAS("adcxx2s");
+MODULE_ALIAS("adcxx4s");
+MODULE_ALIAS("adcxx8s");
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index aacc0c4b809..b06b8e090a2 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -98,6 +98,12 @@ static const char* temperature_sensors_sets[][36] = {
 	  "TH1P", "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S",
 	  "TM1P", "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P",
 	  "TM9S", "TN0H", "TS0C", NULL },
+/* Set 5: iMac */
+	{ "TC0D", "TA0P", "TG0P", "TG0D", "TG0H", "TH0P", "Tm0P", "TO0P",
+	  "Tp0C", NULL },
+/* Set 6: Macbook3 set */
+	{ "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TTF0", "TW0P", "Th0H",
+	  "Th0S", "Th1H", NULL },
 };
 
 /* List of keys used to read/write fan speeds */
@@ -1223,6 +1229,10 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
 	{ .accelerometer = 0, .light = 0, .temperature_set = 3 },
 /* MacPro: temperature set 4 */
 	{ .accelerometer = 0, .light = 0, .temperature_set = 4 },
+/* iMac: temperature set 5 */
+	{ .accelerometer = 0, .light = 0, .temperature_set = 5 },
+/* MacBook3: accelerometer and temperature set 6 */
+	{ .accelerometer = 1, .light = 0, .temperature_set = 6 },
 };
 
 /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
@@ -1232,10 +1242,14 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
 		(void*)&applesmc_dmi_data[0]},
-	{ applesmc_dmi_match, "Apple MacBook", {
+	{ applesmc_dmi_match, "Apple MacBook (v2)", {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook2") },
 		(void*)&applesmc_dmi_data[1]},
+	{ applesmc_dmi_match, "Apple MacBook (v3)", {
+	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") },
+		(void*)&applesmc_dmi_data[6]},
 	{ applesmc_dmi_match, "Apple MacBook", {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") },
@@ -1248,6 +1262,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
 		(void*)&applesmc_dmi_data[4]},
+	{ applesmc_dmi_match, "Apple iMac", {
+	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"iMac") },
+		(void*)&applesmc_dmi_data[5]},
 	{ .ident = NULL }
 };
 
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 70239acecc8..93c17223b52 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -413,10 +413,11 @@ static int __init coretemp_init(void)
 	for_each_online_cpu(i) {
 		struct cpuinfo_x86 *c = &cpu_data(i);
 
-		/* check if family 6, models 0xe, 0xf, 0x16, 0x17 */
+		/* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */
 		if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
 		    !((c->x86_model == 0xe) || (c->x86_model == 0xf) ||
-			(c->x86_model == 0x16) || (c->x86_model == 0x17))) {
+			(c->x86_model == 0x16) || (c->x86_model == 0x17) ||
+			(c->x86_model == 0x1A))) {
 
 			/* supported CPU not found, but report the unknown
 			   family 6 CPU */
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 7b0a32c4dcf..c54eff92be4 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -37,13 +37,21 @@
  * For VRD 10.0 and up, "VRD x.y Design Guide",
  * available at http://developer.intel.com/.
  *
- * AMD NPT 0Fh (Athlon64 & Opteron), AMD Publication 32559,
+ * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
+ * Table 74. VID Code Voltages
+ * This corresponds to an arbitrary VRM code of 24 in the functions below.
+ * These CPU models (K8 revision <= E) have 5 VID pins. See also:
+ * Revision Guide for AMD Athlon 64 and AMD Opteron Processors, AMD Publication 25759,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25759.pdf
+ *
+ * AMD NPT Family 0Fh Processors, AMD Publication 32559,
  * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
  * Table 71. VID Code Voltages
- * AMD Opteron processors don't follow the Intel specifications.
- * I'm going to "make up" 2.4 as the spec number for the Opterons.
- * No good reason just a mnemonic for the 24x Opteron processor
- * series.
+ * This corresponds to an arbitrary VRM code of 25 in the functions below.
+ * These CPU models (K8 revision >= F) have 6 VID pins. See also:
+ * Revision Guide for AMD NPT Family 0Fh Processors, AMD Publication 33610,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/33610.pdf
  *
  * The 17 specification is in fact Intel Mobile Voltage Positioning -
  * (IMVP-II). You can find more information in the datasheet of Max1718
@@ -95,7 +103,12 @@ int vid_from_reg(int val, u8 vrm)
 			return 0;
 		return((1600000 - (val - 2) * 6250 + 500) / 1000);
 
-	case 24:		/* AMD NPT 0Fh (Athlon64 & Opteron) */
+	case 24:		/* Athlon64 & Opteron */
+		val &= 0x1f;
+		if (val == 0x1f)
+			return 0;
+				/* fall through */
+	case 25:		/* AMD NPT 0Fh */
 		val &= 0x3f;
 		return (val < 32) ? 1550 - 25 * val
 			: 775 - (25 * (val - 31)) / 2;
@@ -157,11 +170,16 @@ struct vrm_model {
 
 #ifdef CONFIG_X86
 
-/* the stepping parameter is highest acceptable stepping for current line */
+/*
+ * The stepping parameter is highest acceptable stepping for current line.
+ * The model match must be exact for 4-bit values. For model values 0x10
+ * and above (extended model), all models below the parameter will match.
+ */
 
 static struct vrm_model vrm_models[] = {
 	{X86_VENDOR_AMD, 0x6, ANY, ANY, 90},		/* Athlon Duron etc */
-	{X86_VENDOR_AMD, 0xF, ANY, ANY, 24},		/* Athlon 64, Opteron and above VRM 24 */
+	{X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24},		/* Athlon 64, Opteron */
+	{X86_VENDOR_AMD, 0xF, ANY, ANY, 25},		/* NPT family 0Fh */
 	{X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13},		/* Pentium M (130 nm) */
 	{X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85},		/* Tualatin */
 	{X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13},		/* Pentium M (90 nm) */
@@ -189,6 +207,8 @@ static u8 find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor)
 		if (vrm_models[i].vendor==vendor)
 			if ((vrm_models[i].eff_family==eff_family)
 			 && ((vrm_models[i].eff_model==eff_model) ||
+			     (vrm_models[i].eff_model >= 0x10 &&
+			      eff_model <= vrm_models[i].eff_model) ||
 			     (vrm_models[i].eff_model==ANY)) &&
 			     (eff_stepping <= vrm_models[i].eff_stepping))
 				return vrm_models[i].vrm_type;
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index f9e2ed621f7..2ede9388096 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -81,6 +81,8 @@ static unsigned long amb_reg_temp(unsigned int amb)
 #define MAX_AMBS_PER_CHANNEL		16
 #define MAX_AMBS			(MAX_MEM_CHANNELS * \
 					 MAX_AMBS_PER_CHANNEL)
+#define CHANNEL_SHIFT			4
+#define DIMM_MASK			0xF
 /*
  * Ugly hack: For some reason the highest bit is set if there
  * are _any_ DIMMs in the channel.  Attempting to read from
@@ -89,7 +91,7 @@ static unsigned long amb_reg_temp(unsigned int amb)
  * might prevent us from seeing the 16th DIMM in the channel.
  */
 #define REAL_MAX_AMBS_PER_CHANNEL	15
-#define KNOBS_PER_AMB			5
+#define KNOBS_PER_AMB			6
 
 static unsigned long amb_num_from_reg(unsigned int byte_num, unsigned int bit)
 {
@@ -238,6 +240,16 @@ static ssize_t show_amb_temp(struct device *dev,
 		500 * amb_read_byte(data, amb_reg_temp(attr->index)));
 }
 
+static ssize_t show_label(struct device *dev,
+			  struct device_attribute *devattr,
+			  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	return sprintf(buf, "Ch. %d DIMM %d\n", attr->index >> CHANNEL_SHIFT,
+		       attr->index & DIMM_MASK);
+}
+
 static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 {
 	int i, j, k, d = 0;
@@ -268,6 +280,20 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
 				continue;
 			d++;
 
+			/* sysfs label */
+			iattr = data->attrs + data->num_attrs;
+			snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
+				 "temp%d_label", d);
+			iattr->s_attr.dev_attr.attr.name = iattr->name;
+			iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
+			iattr->s_attr.dev_attr.show = show_label;
+			iattr->s_attr.index = k;
+			res = device_create_file(&pdev->dev,
+						 &iattr->s_attr.dev_attr);
+			if (res)
+				goto exit_remove;
+			data->num_attrs++;
+
 			/* Temperature sysfs knob */
 			iattr = data->attrs + data->num_attrs;
 			snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index c9416e65748..0f70dc20410 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -1,6 +1,6 @@
 /*
- * A hwmon driver for the IBM Active Energy Manager temperature/power sensors
- * and capping functionality.
+ * A hwmon driver for the IBM System Director Active Energy Manager (AEM)
+ * temperature/power/energy sensors and capping functionality.
  * Copyright (C) 2008 IBM
  *
  * Author: Darrick J. Wong <djwong@us.ibm.com>
@@ -463,12 +463,18 @@ static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg,
 }
 
 /* Update AEM energy registers */
+static void update_aem_energy_one(struct aem_data *data, int which)
+{
+	aem_read_sensor(data, AEM_ENERGY_ELEMENT, which,
+			&data->energy[which], 8);
+}
+
 static void update_aem_energy(struct aem_data *data)
 {
-	aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8);
+	update_aem_energy_one(data, 0);
 	if (data->ver_major < 2)
 		return;
-	aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8);
+	update_aem_energy_one(data, 1);
 }
 
 /* Update all AEM1 sensors */
@@ -676,7 +682,8 @@ static int aem_find_aem2(struct aem_ipmi_data *data,
 		return -ETIMEDOUT;
 
 	if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) ||
-	    memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)))
+	    memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)) ||
+	    fi_resp->num_instances <= instance_num)
 		return -ENOENT;
 
 	return 0;
@@ -849,7 +856,7 @@ static ssize_t aem_show_power(struct device *dev,
 	struct timespec b, a;
 
 	mutex_lock(&data->lock);
-	update_aem_energy(data);
+	update_aem_energy_one(data, attr->index);
 	getnstimeofday(&b);
 	before = data->energy[attr->index];
 
@@ -861,7 +868,7 @@ static ssize_t aem_show_power(struct device *dev,
 		return 0;
 	}
 
-	update_aem_energy(data);
+	update_aem_energy_one(data, attr->index);
 	getnstimeofday(&a);
 	after = data->energy[attr->index];
 	mutex_unlock(&data->lock);
@@ -880,7 +887,9 @@ static ssize_t aem_show_energy(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct aem_data *a = dev_get_drvdata(dev);
-	a->update(a);
+	mutex_lock(&a->lock);
+	update_aem_energy_one(a, attr->index);
+	mutex_unlock(&a->lock);
 
 	return sprintf(buf, "%llu\n",
 			(unsigned long long)a->energy[attr->index] * 1000);
@@ -1104,7 +1113,7 @@ static void __exit aem_exit(void)
 }
 
 MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
-MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver");
+MODULE_DESCRIPTION("IBM AEM power/temp/energy sensor driver");
 MODULE_LICENSE("GPL");
 
 module_init(aem_init);
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 7880c273c2c..8f9595f2fb5 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -54,11 +54,11 @@ enum lm75_type {		/* keep sorted in alphabetical order */
 	tmp75,
 };
 
-/* Addresses scanned by legacy style driver binding */
+/* Addresses scanned */
 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
 					0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
 
-/* Insmod parameters (only for legacy style driver binding) */
+/* Insmod parameters */
 I2C_CLIENT_INSMOD_1(lm75);
 
 
@@ -72,7 +72,6 @@ static const u8 LM75_REG_TEMP[3] = {
 
 /* Each client has this additional data */
 struct lm75_data {
-	struct i2c_client	*client;
 	struct device		*hwmon_dev;
 	struct mutex		update_lock;
 	u8			orig_conf;
@@ -138,7 +137,7 @@ static const struct attribute_group lm75_group = {
 
 /*-----------------------------------------------------------------------*/
 
-/* "New style" I2C driver binding -- following the driver model */
+/* device probe and removal */
 
 static int
 lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
@@ -157,8 +156,6 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		return -ENOMEM;
 
 	i2c_set_clientdata(client, data);
-
-	data->client = client;
 	mutex_init(&data->update_lock);
 
 	/* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
@@ -236,45 +233,16 @@ static const struct i2c_device_id lm75_ids[] = {
 };
 MODULE_DEVICE_TABLE(i2c, lm75_ids);
 
-static struct i2c_driver lm75_driver = {
-	.driver = {
-		.name	= "lm75",
-	},
-	.probe		= lm75_probe,
-	.remove		= lm75_remove,
-	.id_table	= lm75_ids,
-};
-
-/*-----------------------------------------------------------------------*/
-
-/* "Legacy" I2C driver binding */
-
-static struct i2c_driver lm75_legacy_driver;
-
-/* This function is called by i2c_probe */
-static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm75_detect(struct i2c_client *new_client, int kind,
+		       struct i2c_board_info *info)
 {
+	struct i2c_adapter *adapter = new_client->adapter;
 	int i;
-	struct i2c_client *new_client;
-	int err = 0;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 				     I2C_FUNC_SMBUS_WORD_DATA))
-		goto exit;
-
-	/* OK. For now, we presume we have a valid address. We create the
-	   client structure, even though there may be no sensor present.
-	   But it allows us to use i2c_smbus_read_*_data() calls. */
-	new_client = kzalloc(sizeof *new_client, GFP_KERNEL);
-	if (!new_client) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &lm75_legacy_driver;
-	new_client->flags = 0;
+		return -ENODEV;
 
 	/* Now, we do the remaining detection. There is no identification-
 	   dedicated register so we have to rely on several tricks:
@@ -294,71 +262,44 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
 		 || i2c_smbus_read_word_data(new_client, 5) != hyst
 		 || i2c_smbus_read_word_data(new_client, 6) != hyst
 		 || i2c_smbus_read_word_data(new_client, 7) != hyst)
-			goto exit_free;
+			return -ENODEV;
 		os = i2c_smbus_read_word_data(new_client, 3);
 		if (i2c_smbus_read_word_data(new_client, 4) != os
 		 || i2c_smbus_read_word_data(new_client, 5) != os
 		 || i2c_smbus_read_word_data(new_client, 6) != os
 		 || i2c_smbus_read_word_data(new_client, 7) != os)
-			goto exit_free;
+			return -ENODEV;
 
 		/* Unused bits */
 		if (conf & 0xe0)
-			goto exit_free;
+			return -ENODEV;
 
 		/* Addresses cycling */
 		for (i = 8; i < 0xff; i += 8)
 			if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
 			 || i2c_smbus_read_word_data(new_client, i + 2) != hyst
 			 || i2c_smbus_read_word_data(new_client, i + 3) != os)
-				goto exit_free;
+				return -ENODEV;
 	}
 
 	/* NOTE: we treat "force=..." and "force_lm75=..." the same.
 	 * Only new-style driver binding distinguishes chip types.
 	 */
-	strlcpy(new_client->name, "lm75", I2C_NAME_SIZE);
-
-	/* Tell the I2C layer a new client has arrived */
-	err = i2c_attach_client(new_client);
-	if (err)
-		goto exit_free;
-
-	err = lm75_probe(new_client, NULL);
-	if (err < 0)
-		goto exit_detach;
+	strlcpy(info->type, "lm75", I2C_NAME_SIZE);
 
 	return 0;
-
-exit_detach:
-	i2c_detach_client(new_client);
-exit_free:
-	kfree(new_client);
-exit:
-	return err;
-}
-
-static int lm75_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, lm75_detect);
 }
 
-static int lm75_detach_client(struct i2c_client *client)
-{
-	lm75_remove(client);
-	i2c_detach_client(client);
-	kfree(client);
-	return 0;
-}
-
-static struct i2c_driver lm75_legacy_driver = {
+static struct i2c_driver lm75_driver = {
+	.class		= I2C_CLASS_HWMON,
 	.driver = {
-		.name	= "lm75_legacy",
+		.name	= "lm75",
 	},
-	.attach_adapter	= lm75_attach_adapter,
-	.detach_client	= lm75_detach_client,
+	.probe		= lm75_probe,
+	.remove		= lm75_remove,
+	.id_table	= lm75_ids,
+	.detect		= lm75_detect,
+	.address_data	= &addr_data,
 };
 
 /*-----------------------------------------------------------------------*/
@@ -424,22 +365,11 @@ static struct lm75_data *lm75_update_device(struct device *dev)
 
 static int __init sensors_lm75_init(void)
 {
-	int status;
-
-	status = i2c_add_driver(&lm75_driver);
-	if (status < 0)
-		return status;
-
-	status = i2c_add_driver(&lm75_legacy_driver);
-	if (status < 0)
-		i2c_del_driver(&lm75_driver);
-
-	return status;
+	return i2c_add_driver(&lm75_driver);
 }
 
 static void __exit sensors_lm75_exit(void)
 {
-	i2c_del_driver(&lm75_legacy_driver);
 	i2c_del_driver(&lm75_driver);
 }
 
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index daa7d121483..de21142d106 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -1055,9 +1055,10 @@ static int w83791d_probe(struct i2c_client *client,
 {
 	struct w83791d_data *data;
 	struct device *dev = &client->dev;
-	int i, val1, err;
+	int i, err;
 
 #ifdef DEBUG
+	int val1;
 	val1 = w83791d_read(client, W83791D_REG_DID_VID4);
 	dev_dbg(dev, "Device ID version: %d.%d (0x%02x)\n",
 			(val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1);
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 96867347bcb..711ca08ab77 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -38,6 +38,20 @@ config I2C_CHARDEV
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-dev.
 
+config I2C_HELPER_AUTO
+	bool "Autoselect pertinent helper modules"
+	default y
+	help
+	  Some I2C bus drivers require so-called "I2C algorithm" modules
+	  to work. These are basically software-only abstractions of generic
+	  I2C interfaces. This option will autoselect them so that you don't
+	  have to care.
+
+	  Unselect this only if you need to enable additional helper
+	  modules, for example for use with external I2C bus drivers.
+
+	  In doubt, say Y.
+
 source drivers/i2c/algos/Kconfig
 source drivers/i2c/busses/Kconfig
 source drivers/i2c/chips/Kconfig
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 7137a17402f..b788579b822 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -2,15 +2,20 @@
 # I2C algorithm drivers configuration
 #
 
+menu "I2C Algorithms"
+	depends on !I2C_HELPER_AUTO
+
 config I2C_ALGOBIT
-	tristate
+	tristate "I2C bit-banging interfaces"
 
 config I2C_ALGOPCF
-	tristate
+	tristate "I2C PCF 8584 interfaces"
 
 config I2C_ALGOPCA
-	tristate
+	tristate "I2C PCA 9564 interfaces"
 
 config I2C_ALGO_SGI
 	tristate
 	depends on SGI_IP22 || SGI_IP32 || X86_VISWS
+
+endmenu
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 72872d1e63e..8ba2bcf727d 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -155,6 +155,9 @@ static int __init amd756_s4882_init(void)
 	int i, error;
 	union i2c_smbus_data ioconfig;
 
+	if (!amd756_smbus.dev.parent)
+		return -ENODEV;
+
 	/* Configure the PCA9556 multiplexer */
 	ioconfig.byte = 0x00; /* All I/O to output mode */
 	error = i2c_smbus_xfer(&amd756_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
@@ -168,11 +171,7 @@ static int __init amd756_s4882_init(void)
 	/* Unregister physical bus */
 	error = i2c_del_adapter(&amd756_smbus);
 	if (error) {
-		if (error == -EINVAL)
-			error = -ENODEV;
-		else
-			dev_err(&amd756_smbus.dev, "Physical bus removal "
-				"failed\n");
+		dev_err(&amd756_smbus.dev, "Physical bus removal failed\n");
 		goto ERROR0;
 	}
 
diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c
index d1a4cbcf2aa..29015eb9ca4 100644
--- a/drivers/i2c/busses/i2c-nforce2-s4985.c
+++ b/drivers/i2c/busses/i2c-nforce2-s4985.c
@@ -150,6 +150,9 @@ static int __init nforce2_s4985_init(void)
 	int i, error;
 	union i2c_smbus_data ioconfig;
 
+	if (!nforce2_smbus)
+		return -ENODEV;
+
 	/* Configure the PCA9556 multiplexer */
 	ioconfig.byte = 0x00; /* All I/O to output mode */
 	error = i2c_smbus_xfer(nforce2_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03,
@@ -161,8 +164,6 @@ static int __init nforce2_s4985_init(void)
 	}
 
 	/* Unregister physical bus */
-	if (!nforce2_smbus)
-		return -ENODEV;
 	error = i2c_del_adapter(nforce2_smbus);
 	if (error) {
 		dev_err(&nforce2_smbus->dev, "Physical bus removal failed\n");
diff --git a/drivers/i2c/chips/at24.c b/drivers/i2c/chips/at24.c
index e764c94f3e3..2a4acb26956 100644
--- a/drivers/i2c/chips/at24.c
+++ b/drivers/i2c/chips/at24.c
@@ -188,7 +188,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
 			count = I2C_SMBUS_BLOCK_MAX;
 		status = i2c_smbus_read_i2c_block_data(client, offset,
 				count, buf);
-		dev_dbg(&client->dev, "smbus read %zd@%d --> %d\n",
+		dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
 				count, offset, status);
 		return (status < 0) ? -EIO : status;
 	}
@@ -214,7 +214,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
 	msg[1].len = count;
 
 	status = i2c_transfer(client->adapter, msg, 2);
-	dev_dbg(&client->dev, "i2c read %zd@%d --> %d\n",
+	dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
 			count, offset, status);
 
 	if (status == 2)
@@ -334,7 +334,7 @@ static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
 			if (status == 1)
 				status = count;
 		}
-		dev_dbg(&client->dev, "write %zd@%d --> %zd (%ld)\n",
+		dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n",
 				count, offset, status, jiffies);
 
 		if (status == count)
@@ -512,7 +512,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	i2c_set_clientdata(client, at24);
 
-	dev_info(&client->dev, "%Zd byte %s EEPROM %s\n",
+	dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
 		at24->bin.size, client->name,
 		writable ? "(writable)" : "(read-only)");
 	dev_dbg(&client->dev,
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 18355ae2155..4655b794ebe 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -1593,7 +1593,7 @@ fail1:
 	if (machine_is_omap_h2()) {
 		/* full speed signaling by default */
 		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
-			MC1_SPEED_REG);
+			MC1_SPEED);
 		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2,
 			MC2_SPD_SUSP_CTRL);
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 7bf38c41808..550853f79ae 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -813,7 +813,12 @@ static int i2c_check_addr(struct i2c_adapter *adapter, int addr)
 int i2c_attach_client(struct i2c_client *client)
 {
 	struct i2c_adapter *adapter = client->adapter;
-	int res = 0;
+	int res;
+
+	/* Check for address business */
+	res = i2c_check_addr(adapter, client->addr);
+	if (res)
+		return res;
 
 	client->dev.parent = &client->adapter->dev;
 	client->dev.bus = &i2c_bus_type;
@@ -1451,9 +1456,11 @@ i2c_new_probed_device(struct i2c_adapter *adap,
 		if ((addr_list[i] & ~0x07) == 0x30
 		 || (addr_list[i] & ~0x0f) == 0x50
 		 || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK)) {
+			union i2c_smbus_data data;
+
 			if (i2c_smbus_xfer(adap, addr_list[i], 0,
 					   I2C_SMBUS_READ, 0,
-					   I2C_SMBUS_BYTE, NULL) >= 0)
+					   I2C_SMBUS_BYTE, &data) >= 0)
 				break;
 		} else {
 			if (i2c_smbus_xfer(adap, addr_list[i], 0,
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 9d55c6383b2..af4491fa7e3 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -147,7 +147,7 @@ static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count,
 	if (tmp==NULL)
 		return -ENOMEM;
 
-	pr_debug("i2c-dev: i2c-%d reading %zd bytes.\n",
+	pr_debug("i2c-dev: i2c-%d reading %zu bytes.\n",
 		iminor(file->f_path.dentry->d_inode), count);
 
 	ret = i2c_master_recv(client,tmp,count);
@@ -175,7 +175,7 @@ static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t c
 		return -EFAULT;
 	}
 
-	pr_debug("i2c-dev: i2c-%d writing %zd bytes.\n",
+	pr_debug("i2c-dev: i2c-%d writing %zu bytes.\n",
 		iminor(file->f_path.dentry->d_inode), count);
 
 	ret = i2c_master_send(client,tmp,count);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 89a112d513a..49a8c589e34 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1272,9 +1272,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
  */
 static void msf_from_bcd(struct atapi_msf *msf)
 {
-	msf->minute = BCD2BIN(msf->minute);
-	msf->second = BCD2BIN(msf->second);
-	msf->frame  = BCD2BIN(msf->frame);
+	msf->minute = bcd2bin(msf->minute);
+	msf->second = bcd2bin(msf->second);
+	msf->frame  = bcd2bin(msf->frame);
 }
 
 int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
@@ -1415,8 +1415,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 		return stat;
 
 	if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
-		toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
-		toc->hdr.last_track  = BCD2BIN(toc->hdr.last_track);
+		toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
+		toc->hdr.last_track  = bcd2bin(toc->hdr.last_track);
 	}
 
 	ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
@@ -1456,8 +1456,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 			return stat;
 
 		if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
-			toc->hdr.first_track = (u8)BIN2BCD(CDROM_LEADOUT);
-			toc->hdr.last_track = (u8)BIN2BCD(CDROM_LEADOUT);
+			toc->hdr.first_track = (u8)bin2bcd(CDROM_LEADOUT);
+			toc->hdr.last_track = (u8)bin2bcd(CDROM_LEADOUT);
 		} else {
 			toc->hdr.first_track = CDROM_LEADOUT;
 			toc->hdr.last_track = CDROM_LEADOUT;
@@ -1470,14 +1470,14 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 	toc->hdr.toc_length = be16_to_cpu(toc->hdr.toc_length);
 
 	if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
-		toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
-		toc->hdr.last_track  = BCD2BIN(toc->hdr.last_track);
+		toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
+		toc->hdr.last_track  = bcd2bin(toc->hdr.last_track);
 	}
 
 	for (i = 0; i <= ntracks; i++) {
 		if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
 			if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD)
-				toc->ent[i].track = BCD2BIN(toc->ent[i].track);
+				toc->ent[i].track = bcd2bin(toc->ent[i].track);
 			msf_from_bcd(&toc->ent[i].addr.msf);
 		}
 		toc->ent[i].addr.lba = msf_to_lba(toc->ent[i].addr.msf.minute,
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 40644b6f1c0..3187215e8f8 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -307,7 +307,7 @@ static struct pci_driver driver = {
 	.name		= "AEC62xx_IDE",
 	.id_table	= aec62xx_pci_tbl,
 	.probe		= aec62xx_init_one,
-	.remove		= aec62xx_remove,
+	.remove		= __devexit_p(aec62xx_remove),
 };
 
 static int __init aec62xx_ide_init(void)
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index bfae2f882f4..e6d8ee88d56 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -447,7 +447,7 @@ static struct pci_driver driver = {
 	.name		= "Cypress_IDE",
 	.id_table	= cy82c693_pci_tbl,
 	.probe		= cy82c693_init_one,
-	.remove		= cy82c693_remove,
+	.remove		= __devexit_p(cy82c693_remove),
 };
 
 static int __init cy82c693_ide_init(void)
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 748793a413a..eb107eef0db 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1620,7 +1620,7 @@ static struct pci_driver driver = {
 	.name		= "HPT366_IDE",
 	.id_table	= hpt366_pci_tbl,
 	.probe		= hpt366_init_one,
-	.remove		= hpt366_remove,
+	.remove		= __devexit_p(hpt366_remove),
 };
 
 static int __init hpt366_ide_init(void)
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index b6dc723de70..4a1508a707c 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -686,7 +686,7 @@ static struct pci_driver driver = {
 	.name		= "ITE821x IDE",
 	.id_table	= it821x_pci_tbl,
 	.probe		= it821x_init_one,
-	.remove		= it821x_remove,
+	.remove		= __devexit_p(it821x_remove),
 };
 
 static int __init it821x_ide_init(void)
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 0f609b72f47..d477da6b585 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -566,7 +566,7 @@ static struct pci_driver driver = {
 	.name		= "Promise_IDE",
 	.id_table	= pdc202new_pci_tbl,
 	.probe		= pdc202new_init_one,
-	.remove		= pdc202new_remove,
+	.remove		= __devexit_p(pdc202new_remove),
 };
 
 static int __init pdc202new_ide_init(void)
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 6cde48bba6f..44cccd1e086 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -954,7 +954,7 @@ static struct pci_driver driver = {
 	.name = "SCC IDE",
 	.id_table = scc_pci_tbl,
 	.probe = scc_init_one,
-	.remove = scc_remove,
+	.remove = __devexit_p(scc_remove),
 };
 
 static int scc_ide_init(void)
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 42eef19a18f..681306c9d79 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -621,9 +621,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
 	    DRV_NAME)) {
 		printk(KERN_ERR
-			"%s : %s -- ERROR, Addresses "
+			"%s %s: -- ERROR, Addresses "
 			"0x%p to 0x%p ALREADY in use\n",
-		       __func__, DRV_NAME, (void *) cmd_phys_base,
+		       DRV_NAME, pci_name(dev), (void *)cmd_phys_base,
 		       (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
 		return -ENOMEM;
 	}
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 445ce6fbea3..db2b88a369a 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -832,7 +832,7 @@ static struct pci_driver driver = {
 	.name		= "SiI_IDE",
 	.id_table	= siimage_pci_tbl,
 	.probe		= siimage_init_one,
-	.remove		= siimage_remove,
+	.remove		= __devexit_p(siimage_remove),
 };
 
 static int __init siimage_ide_init(void)
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index e5a4b42b4e3..5efe21d6ef9 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -610,7 +610,7 @@ static struct pci_driver driver = {
 	.name		= "SIS_IDE",
 	.id_table	= sis5513_pci_tbl,
 	.probe		= sis5513_init_one,
-	.remove		= sis5513_remove,
+	.remove		= __devexit_p(sis5513_remove),
 };
 
 static int __init sis5513_ide_init(void)
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 7fc88c375e5..927277c54ec 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -249,7 +249,7 @@ static struct pci_driver driver = {
 	.name		= "TC86C001",
 	.id_table	= tc86c001_pci_tbl,
 	.probe		= tc86c001_init_one,
-	.remove		= tc86c001_remove,
+	.remove		= __devexit_p(tc86c001_remove),
 };
 
 static int __init tc86c001_ide_init(void)
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index a6b2cc83f29..94fb9ab3223 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -491,7 +491,7 @@ static struct pci_driver driver = {
 	.name 		= "VIA_IDE",
 	.id_table 	= via_pci_tbl,
 	.probe 		= via_init_one,
-	.remove		= via_remove,
+	.remove		= __devexit_p(via_remove),
 };
 
 static int __init via_ide_init(void)
diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h
index 0b0618edd64..1ab919f836a 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes.h
@@ -156,6 +156,14 @@ struct ehca_mod_qp_parm {
 
 #define EHCA_MOD_QP_PARM_MAX 4
 
+#define QMAP_IDX_MASK 0xFFFFULL
+
+/* struct for tracking if cqes have been reported to the application */
+struct ehca_qmap_entry {
+	u16 app_wr_id;
+	u16 reported;
+};
+
 struct ehca_qp {
 	union {
 		struct ib_qp ib_qp;
@@ -165,6 +173,7 @@ struct ehca_qp {
 	enum ehca_ext_qp_type ext_type;
 	enum ib_qp_state state;
 	struct ipz_queue ipz_squeue;
+	struct ehca_qmap_entry *sq_map;
 	struct ipz_queue ipz_rqueue;
 	struct h_galpas galpas;
 	u32 qkey;
diff --git a/drivers/infiniband/hw/ehca/ehca_qes.h b/drivers/infiniband/hw/ehca/ehca_qes.h
index 818803057eb..5d28e3e98a2 100644
--- a/drivers/infiniband/hw/ehca/ehca_qes.h
+++ b/drivers/infiniband/hw/ehca/ehca_qes.h
@@ -213,6 +213,7 @@ struct ehca_wqe {
 #define WC_STATUS_ERROR_BIT 0x80000000
 #define WC_STATUS_REMOTE_ERROR_FLAGS 0x0000F800
 #define WC_STATUS_PURGE_BIT 0x10
+#define WC_SEND_RECEIVE_BIT 0x80
 
 struct ehca_cqe {
 	u64 work_request_id;
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index ea13efddf17..b6bcee03673 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -412,6 +412,7 @@ static struct ehca_qp *internal_create_qp(
 	struct ehca_shca *shca = container_of(pd->device, struct ehca_shca,
 					      ib_device);
 	struct ib_ucontext *context = NULL;
+	u32 nr_qes;
 	u64 h_ret;
 	int is_llqp = 0, has_srq = 0;
 	int qp_type, max_send_sge, max_recv_sge, ret;
@@ -715,6 +716,15 @@ static struct ehca_qp *internal_create_qp(
 				 "and pages ret=%i", ret);
 			goto create_qp_exit2;
 		}
+		nr_qes = my_qp->ipz_squeue.queue_length /
+			 my_qp->ipz_squeue.qe_size;
+		my_qp->sq_map = vmalloc(nr_qes *
+					sizeof(struct ehca_qmap_entry));
+		if (!my_qp->sq_map) {
+			ehca_err(pd->device, "Couldn't allocate squeue "
+				 "map ret=%i", ret);
+			goto create_qp_exit3;
+		}
 	}
 
 	if (HAS_RQ(my_qp)) {
@@ -724,7 +734,7 @@ static struct ehca_qp *internal_create_qp(
 		if (ret) {
 			ehca_err(pd->device, "Couldn't initialize rqueue "
 				 "and pages ret=%i", ret);
-			goto create_qp_exit3;
+			goto create_qp_exit4;
 		}
 	}
 
@@ -770,7 +780,7 @@ static struct ehca_qp *internal_create_qp(
 			if (!my_qp->mod_qp_parm) {
 				ehca_err(pd->device,
 					 "Could not alloc mod_qp_parm");
-				goto create_qp_exit4;
+				goto create_qp_exit5;
 			}
 		}
 	}
@@ -780,7 +790,7 @@ static struct ehca_qp *internal_create_qp(
 		h_ret = ehca_define_sqp(shca, my_qp, init_attr);
 		if (h_ret != H_SUCCESS) {
 			ret = ehca2ib_return_code(h_ret);
-			goto create_qp_exit5;
+			goto create_qp_exit6;
 		}
 	}
 
@@ -789,7 +799,7 @@ static struct ehca_qp *internal_create_qp(
 		if (ret) {
 			ehca_err(pd->device,
 				 "Couldn't assign qp to send_cq ret=%i", ret);
-			goto create_qp_exit5;
+			goto create_qp_exit6;
 		}
 	}
 
@@ -815,22 +825,26 @@ static struct ehca_qp *internal_create_qp(
 		if (ib_copy_to_udata(udata, &resp, sizeof resp)) {
 			ehca_err(pd->device, "Copy to udata failed");
 			ret = -EINVAL;
-			goto create_qp_exit6;
+			goto create_qp_exit7;
 		}
 	}
 
 	return my_qp;
 
-create_qp_exit6:
+create_qp_exit7:
 	ehca_cq_unassign_qp(my_qp->send_cq, my_qp->real_qp_num);
 
-create_qp_exit5:
+create_qp_exit6:
 	kfree(my_qp->mod_qp_parm);
 
-create_qp_exit4:
+create_qp_exit5:
 	if (HAS_RQ(my_qp))
 		ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
 
+create_qp_exit4:
+	if (HAS_SQ(my_qp))
+		vfree(my_qp->sq_map);
+
 create_qp_exit3:
 	if (HAS_SQ(my_qp))
 		ipz_queue_dtor(my_pd, &my_qp->ipz_squeue);
@@ -1534,8 +1548,6 @@ static int internal_modify_qp(struct ib_qp *ibqp,
 	if (attr_mask & IB_QP_QKEY)
 		my_qp->qkey = attr->qkey;
 
-	my_qp->state = qp_new_state;
-
 modify_qp_exit2:
 	if (squeue_locked) { /* this means: sqe -> rts */
 		spin_unlock_irqrestore(&my_qp->spinlock_s, flags);
@@ -1551,6 +1563,8 @@ modify_qp_exit1:
 int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask,
 		   struct ib_udata *udata)
 {
+	int ret = 0;
+
 	struct ehca_shca *shca = container_of(ibqp->device, struct ehca_shca,
 					      ib_device);
 	struct ehca_qp *my_qp = container_of(ibqp, struct ehca_qp, ib_qp);
@@ -1597,12 +1611,18 @@ int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask,
 				 attr->qp_state, my_qp->init_attr.port_num,
 				 ibqp->qp_type);
 			spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
-			return 0;
+			goto out;
 		}
 		spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
 	}
 
-	return internal_modify_qp(ibqp, attr, attr_mask, 0);
+	ret = internal_modify_qp(ibqp, attr, attr_mask, 0);
+
+out:
+	if ((ret == 0) && (attr_mask & IB_QP_STATE))
+		my_qp->state = attr->qp_state;
+
+	return ret;
 }
 
 void ehca_recover_sqp(struct ib_qp *sqp)
@@ -1973,8 +1993,10 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 
 	if (HAS_RQ(my_qp))
 		ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
-	if (HAS_SQ(my_qp))
+	if (HAS_SQ(my_qp)) {
 		ipz_queue_dtor(my_pd, &my_qp->ipz_squeue);
+		vfree(my_qp->sq_map);
+	}
 	kmem_cache_free(qp_cache, my_qp);
 	atomic_dec(&shca->num_qps);
 	return 0;
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index 898c8b5c38d..4426d82fe79 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -139,6 +139,7 @@ static void trace_send_wr_ud(const struct ib_send_wr *send_wr)
 static inline int ehca_write_swqe(struct ehca_qp *qp,
 				  struct ehca_wqe *wqe_p,
 				  const struct ib_send_wr *send_wr,
+				  u32 sq_map_idx,
 				  int hidden)
 {
 	u32 idx;
@@ -157,7 +158,11 @@ static inline int ehca_write_swqe(struct ehca_qp *qp,
 	/* clear wqe header until sglist */
 	memset(wqe_p, 0, offsetof(struct ehca_wqe, u.ud_av.sg_list));
 
-	wqe_p->work_request_id = send_wr->wr_id;
+	wqe_p->work_request_id = send_wr->wr_id & ~QMAP_IDX_MASK;
+	wqe_p->work_request_id |= sq_map_idx & QMAP_IDX_MASK;
+
+	qp->sq_map[sq_map_idx].app_wr_id = send_wr->wr_id & QMAP_IDX_MASK;
+	qp->sq_map[sq_map_idx].reported = 0;
 
 	switch (send_wr->opcode) {
 	case IB_WR_SEND:
@@ -381,6 +386,7 @@ static inline int post_one_send(struct ehca_qp *my_qp,
 {
 	struct ehca_wqe *wqe_p;
 	int ret;
+	u32 sq_map_idx;
 	u64 start_offset = my_qp->ipz_squeue.current_q_offset;
 
 	/* get pointer next to free WQE */
@@ -393,8 +399,15 @@ static inline int post_one_send(struct ehca_qp *my_qp,
 			 "qp_num=%x", my_qp->ib_qp.qp_num);
 		return -ENOMEM;
 	}
+
+	/*
+	 * Get the index of the WQE in the send queue. The same index is used
+	 * for writing into the sq_map.
+	 */
+	sq_map_idx = start_offset / my_qp->ipz_squeue.qe_size;
+
 	/* write a SEND WQE into the QUEUE */
-	ret = ehca_write_swqe(my_qp, wqe_p, cur_send_wr, hidden);
+	ret = ehca_write_swqe(my_qp, wqe_p, cur_send_wr, sq_map_idx, hidden);
 	/*
 	 * if something failed,
 	 * reset the free entry pointer to the start value
@@ -589,7 +602,7 @@ static inline int ehca_poll_cq_one(struct ib_cq *cq, struct ib_wc *wc)
 	struct ehca_qp *my_qp;
 	int cqe_count = 0, is_error;
 
-poll_cq_one_read_cqe:
+repoll:
 	cqe = (struct ehca_cqe *)
 		ipz_qeit_get_inc_valid(&my_cq->ipz_queue);
 	if (!cqe) {
@@ -617,7 +630,7 @@ poll_cq_one_read_cqe:
 			ehca_dmp(cqe, 64, "cq_num=%x qp_num=%x",
 				 my_cq->cq_number, cqe->local_qp_number);
 			/* ignore this purged cqe */
-			goto poll_cq_one_read_cqe;
+			goto repoll;
 		}
 		spin_lock_irqsave(&qp->spinlock_s, flags);
 		purgeflag = qp->sqerr_purgeflag;
@@ -636,7 +649,7 @@ poll_cq_one_read_cqe:
 			 * that caused sqe and turn off purge flag
 			 */
 			qp->sqerr_purgeflag = 0;
-			goto poll_cq_one_read_cqe;
+			goto repoll;
 		}
 	}
 
@@ -654,8 +667,34 @@ poll_cq_one_read_cqe:
 			 my_cq, my_cq->cq_number);
 	}
 
-	/* we got a completion! */
-	wc->wr_id = cqe->work_request_id;
+	read_lock(&ehca_qp_idr_lock);
+	my_qp = idr_find(&ehca_qp_idr, cqe->qp_token);
+	read_unlock(&ehca_qp_idr_lock);
+	if (!my_qp)
+		goto repoll;
+	wc->qp = &my_qp->ib_qp;
+
+	if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT)) {
+		struct ehca_qmap_entry *qmap_entry;
+		/*
+		 * We got a send completion and need to restore the original
+		 * wr_id.
+		 */
+		qmap_entry = &my_qp->sq_map[cqe->work_request_id &
+					    QMAP_IDX_MASK];
+
+		if (qmap_entry->reported) {
+			ehca_warn(cq->device, "Double cqe on qp_num=%#x",
+				  my_qp->real_qp_num);
+			/* found a double cqe, discard it and read next one */
+			goto repoll;
+		}
+		wc->wr_id = cqe->work_request_id & ~QMAP_IDX_MASK;
+		wc->wr_id |= qmap_entry->app_wr_id;
+		qmap_entry->reported = 1;
+	} else
+		/* We got a receive completion. */
+		wc->wr_id = cqe->work_request_id;
 
 	/* eval ib_wc_opcode */
 	wc->opcode = ib_wc_opcode[cqe->optype]-1;
@@ -667,7 +706,7 @@ poll_cq_one_read_cqe:
 		ehca_dmp(cqe, 64, "ehca_cq=%p cq_num=%x",
 			 my_cq, my_cq->cq_number);
 		/* update also queue adder to throw away this entry!!! */
-		goto poll_cq_one_exit0;
+		goto repoll;
 	}
 
 	/* eval ib_wc_status */
@@ -678,11 +717,6 @@ poll_cq_one_read_cqe:
 	} else
 		wc->status = IB_WC_SUCCESS;
 
-	read_lock(&ehca_qp_idr_lock);
-	my_qp = idr_find(&ehca_qp_idr, cqe->qp_token);
-	wc->qp = &my_qp->ib_qp;
-	read_unlock(&ehca_qp_idr_lock);
-
 	wc->byte_len = cqe->nr_bytes_transferred;
 	wc->pkey_index = cqe->pkey_index;
 	wc->slid = cqe->rlid;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 7ebc400a4b3..341ffedafed 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -202,7 +202,7 @@ static void ipoib_cm_free_rx_ring(struct net_device *dev,
 			dev_kfree_skb_any(rx_ring[i].skb);
 		}
 
-	kfree(rx_ring);
+	vfree(rx_ring);
 }
 
 static void ipoib_cm_start_rx_drain(struct ipoib_dev_priv *priv)
@@ -352,9 +352,14 @@ static int ipoib_cm_nonsrq_init_rx(struct net_device *dev, struct ib_cm_id *cm_i
 	int ret;
 	int i;
 
-	rx->rx_ring = kcalloc(ipoib_recvq_size, sizeof *rx->rx_ring, GFP_KERNEL);
-	if (!rx->rx_ring)
+	rx->rx_ring = vmalloc(ipoib_recvq_size * sizeof *rx->rx_ring);
+	if (!rx->rx_ring) {
+		printk(KERN_WARNING "%s: failed to allocate CM non-SRQ ring (%d entries)\n",
+		       priv->ca->name, ipoib_recvq_size);
 		return -ENOMEM;
+	}
+
+	memset(rx->rx_ring, 0, ipoib_recvq_size * sizeof *rx->rx_ring);
 
 	t = kmalloc(sizeof *t, GFP_KERNEL);
 	if (!t) {
@@ -1494,14 +1499,16 @@ static void ipoib_cm_create_srq(struct net_device *dev, int max_sge)
 		return;
 	}
 
-	priv->cm.srq_ring = kzalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring,
-				    GFP_KERNEL);
+	priv->cm.srq_ring = vmalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring);
 	if (!priv->cm.srq_ring) {
 		printk(KERN_WARNING "%s: failed to allocate CM SRQ ring (%d entries)\n",
 		       priv->ca->name, ipoib_recvq_size);
 		ib_destroy_srq(priv->cm.srq);
 		priv->cm.srq = NULL;
+		return;
 	}
+
+	memset(priv->cm.srq_ring, 0, ipoib_recvq_size * sizeof *priv->cm.srq_ring);
 }
 
 int ipoib_cm_dev_init(struct net_device *dev)
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 2d65411f676..a92d8156755 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -647,6 +647,47 @@ static int str_to_user(const char *str, unsigned int maxlen, void __user *p)
 	return copy_to_user(p, str, len) ? -EFAULT : len;
 }
 
+#define OLD_KEY_MAX	0x1ff
+static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user *p, int compat_mode)
+{
+	static unsigned long keymax_warn_time;
+	unsigned long *bits;
+	int len;
+
+	switch (_IOC_NR(cmd) & EV_MAX) {
+
+	case      0: bits = dev->evbit;  len = EV_MAX;  break;
+	case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
+	case EV_REL: bits = dev->relbit; len = REL_MAX; break;
+	case EV_ABS: bits = dev->absbit; len = ABS_MAX; break;
+	case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break;
+	case EV_LED: bits = dev->ledbit; len = LED_MAX; break;
+	case EV_SND: bits = dev->sndbit; len = SND_MAX; break;
+	case EV_FF:  bits = dev->ffbit;  len = FF_MAX;  break;
+	case EV_SW:  bits = dev->swbit;  len = SW_MAX;  break;
+	default: return -EINVAL;
+	}
+
+	/*
+	 * Work around bugs in userspace programs that like to do
+	 * EVIOCGBIT(EV_KEY, KEY_MAX) and not realize that 'len'
+	 * should be in bytes, not in bits.
+	 */
+	if ((_IOC_NR(cmd) & EV_MAX) == EV_KEY && _IOC_SIZE(cmd) == OLD_KEY_MAX) {
+		len = OLD_KEY_MAX;
+		if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
+			printk(KERN_WARNING
+				"evdev.c(EVIOCGBIT): Suspicious buffer size %d, "
+				"limiting output to %d bytes. See "
+				"http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
+				OLD_KEY_MAX,
+				BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
+	}
+
+	return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
+}
+#undef OLD_KEY_MAX
+
 static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 			   void __user *p, int compat_mode)
 {
@@ -733,26 +774,8 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 
 		if (_IOC_DIR(cmd) == _IOC_READ) {
 
-			if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0))) {
-
-				unsigned long *bits;
-				int len;
-
-				switch (_IOC_NR(cmd) & EV_MAX) {
-
-				case      0: bits = dev->evbit;  len = EV_MAX;  break;
-				case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
-				case EV_REL: bits = dev->relbit; len = REL_MAX; break;
-				case EV_ABS: bits = dev->absbit; len = ABS_MAX; break;
-				case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break;
-				case EV_LED: bits = dev->ledbit; len = LED_MAX; break;
-				case EV_SND: bits = dev->sndbit; len = SND_MAX; break;
-				case EV_FF:  bits = dev->ffbit;  len = FF_MAX;  break;
-				case EV_SW:  bits = dev->swbit;  len = SW_MAX;  break;
-				default: return -EINVAL;
-				}
-				return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
-			}
+			if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0)))
+				return handle_eviocgbit(dev, cmd, p, compat_mode);
 
 			if (_IOC_NR(cmd) == _IOC_NR(EVIOCGKEY(0)))
 				return bits_to_user(dev->key, KEY_MAX, _IOC_SIZE(cmd),
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 87d3e7eabff..6791be81eb2 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -127,6 +127,7 @@ static const struct xpad_device {
 	{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index be58730e636..3f48279f219 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -118,6 +118,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 		unsigned int type = button->type ?: EV_KEY;
 
 		bdata->input = input;
+		bdata->button = button;
 		setup_timer(&bdata->timer,
 			    gpio_check_button, (unsigned long)bdata);
 
@@ -256,7 +257,7 @@ static int gpio_keys_resume(struct platform_device *pdev)
 #define gpio_keys_resume	NULL
 #endif
 
-struct platform_driver gpio_keys_device_driver = {
+static struct platform_driver gpio_keys_device_driver = {
 	.probe		= gpio_keys_probe,
 	.remove		= __devexit_p(gpio_keys_remove),
 	.suspend	= gpio_keys_suspend,
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 7bbea097cda..f996546fc44 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -130,6 +130,29 @@ config MOUSE_APPLETOUCH
 	  To compile this driver as a module, choose M here: the
 	  module will be called appletouch.
 
+config MOUSE_BCM5974
+	tristate "Apple USB BCM5974 Multitouch trackpad support"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you have an Apple USB BCM5974 Multitouch
+	  trackpad.
+
+	  The BCM5974 is the multitouch trackpad found in the Macbook
+	  Air (JAN2008) and Macbook Pro Penryn (FEB2008) laptops.
+
+	  It is also found in the IPhone (2007) and Ipod Touch (2008).
+
+	  This driver provides multitouch functionality together with
+	  the synaptics X11 driver.
+
+	  The interface is currently identical to the appletouch interface,
+	  for further information, see
+	  <file:Documentation/input/appletouch.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bcm5974.
+
 config MOUSE_INPORT
 	tristate "InPort/MS/ATIXL busmouse"
 	depends on ISA
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 9e6e3633082..d4d20251609 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -6,6 +6,7 @@
 
 obj-$(CONFIG_MOUSE_AMIGA)	+= amimouse.o
 obj-$(CONFIG_MOUSE_APPLETOUCH)	+= appletouch.o
+obj-$(CONFIG_MOUSE_BCM5974)	+= bcm5974.o
 obj-$(CONFIG_MOUSE_ATARI)	+= atarimouse.o
 obj-$(CONFIG_MOUSE_RISCPC)	+= rpcmouse.o
 obj-$(CONFIG_MOUSE_INPORT)	+= inport.o
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
new file mode 100644
index 00000000000..2ec921bf3c6
--- /dev/null
+++ b/drivers/input/mouse/bcm5974.c
@@ -0,0 +1,681 @@
+/*
+ * Apple USB BCM5974 (Macbook Air and Penryn Macbook Pro) multitouch driver
+ *
+ * Copyright (C) 2008	   Henrik Rydberg (rydberg@euromail.se)
+ *
+ * The USB initialization and package decoding was made by
+ * Scott Shawcroft as part of the touchd user-space driver project:
+ * Copyright (C) 2008	   Scott Shawcroft (scott.shawcroft@gmail.com)
+ *
+ * The BCM5974 driver is based on the appletouch driver:
+ * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2005      Johannes Berg (johannes@sipsolutions.net)
+ * Copyright (C) 2005	   Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2005	   Frank Arnold (frank@scirocco-5v-turbo.de)
+ * Copyright (C) 2005	   Peter Osterlund (petero2@telia.com)
+ * Copyright (C) 2005	   Michael Hanselmann (linux-kernel@hansmi.ch)
+ * Copyright (C) 2006	   Nicolas Boichat (nicolas@boichat.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <linux/hid.h>
+#include <linux/mutex.h>
+
+#define USB_VENDOR_ID_APPLE		0x05ac
+
+/* MacbookAir, aka wellspring */
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ANSI	0x0223
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ISO	0x0224
+#define USB_DEVICE_ID_APPLE_WELLSPRING_JIS	0x0225
+/* MacbookProPenryn, aka wellspring2 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI	0x0230
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO	0x0231
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS	0x0232
+
+#define BCM5974_DEVICE(prod) {					\
+	.match_flags = (USB_DEVICE_ID_MATCH_DEVICE |		\
+			USB_DEVICE_ID_MATCH_INT_CLASS |		\
+			USB_DEVICE_ID_MATCH_INT_PROTOCOL),	\
+	.idVendor = USB_VENDOR_ID_APPLE,			\
+	.idProduct = (prod),					\
+	.bInterfaceClass = USB_INTERFACE_CLASS_HID,		\
+	.bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE	\
+}
+
+/* table of devices that work with this driver */
+static const struct usb_device_id bcm5974_table [] = {
+	/* MacbookAir1.1 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_JIS),
+	/* MacbookProPenryn */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
+	/* Terminating entry */
+	{}
+};
+MODULE_DEVICE_TABLE(usb, bcm5974_table);
+
+MODULE_AUTHOR("Henrik Rydberg");
+MODULE_DESCRIPTION("Apple USB BCM5974 multitouch driver");
+MODULE_LICENSE("GPL");
+
+#define dprintk(level, format, a...)\
+	{ if (debug >= level) printk(KERN_DEBUG format, ##a); }
+
+static int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activate debugging output");
+
+/* button data structure */
+struct bt_data {
+	u8 unknown1;		/* constant */
+	u8 button;		/* left button */
+	u8 rel_x;		/* relative x coordinate */
+	u8 rel_y;		/* relative y coordinate */
+};
+
+/* trackpad header structure */
+struct tp_header {
+	u8 unknown1[16];	/* constants, timers, etc */
+	u8 fingers;		/* number of fingers on trackpad */
+	u8 unknown2[9];		/* constants, timers, etc */
+};
+
+/* trackpad finger structure */
+struct tp_finger {
+	__le16 origin;		/* left/right origin? */
+	__le16 abs_x;		/* absolute x coodinate */
+	__le16 abs_y;		/* absolute y coodinate */
+	__le16 rel_x;		/* relative x coodinate */
+	__le16 rel_y;		/* relative y coodinate */
+	__le16 size_major;	/* finger size, major axis? */
+	__le16 size_minor;	/* finger size, minor axis? */
+	__le16 orientation;	/* 16384 when point, else 15 bit angle */
+	__le16 force_major;	/* trackpad force, major axis? */
+	__le16 force_minor;	/* trackpad force, minor axis? */
+	__le16 unused[3];	/* zeros */
+	__le16 multi;		/* one finger: varies, more fingers: constant */
+};
+
+/* trackpad data structure, empirically at least ten fingers */
+struct tp_data {
+	struct tp_header header;
+	struct tp_finger finger[16];
+};
+
+/* device-specific parameters */
+struct bcm5974_param {
+	int dim;		/* logical dimension */
+	int fuzz;		/* logical noise value */
+	int devmin;		/* device minimum reading */
+	int devmax;		/* device maximum reading */
+};
+
+/* device-specific configuration */
+struct bcm5974_config {
+	int ansi, iso, jis;	/* the product id of this device */
+	int bt_ep;		/* the endpoint of the button interface */
+	int bt_datalen;		/* data length of the button interface */
+	int tp_ep;		/* the endpoint of the trackpad interface */
+	int tp_datalen;		/* data length of the trackpad interface */
+	struct bcm5974_param p;	/* finger pressure limits */
+	struct bcm5974_param w;	/* finger width limits */
+	struct bcm5974_param x;	/* horizontal limits */
+	struct bcm5974_param y;	/* vertical limits */
+};
+
+/* logical device structure */
+struct bcm5974 {
+	char phys[64];
+	struct usb_device *udev;	/* usb device */
+	struct usb_interface *intf;	/* our interface */
+	struct input_dev *input;	/* input dev */
+	struct bcm5974_config cfg;	/* device configuration */
+	struct mutex pm_mutex;		/* serialize access to open/suspend */
+	int opened;			/* 1: opened, 0: closed */
+	struct urb *bt_urb;		/* button usb request block */
+	struct bt_data *bt_data;	/* button transferred data */
+	struct urb *tp_urb;		/* trackpad usb request block */
+	struct tp_data *tp_data;	/* trackpad transferred data */
+};
+
+/* logical dimensions */
+#define DIM_PRESSURE	256		/* maximum finger pressure */
+#define DIM_WIDTH	16		/* maximum finger width */
+#define DIM_X		1280		/* maximum trackpad x value */
+#define DIM_Y		800		/* maximum trackpad y value */
+
+/* logical signal quality */
+#define SN_PRESSURE	45		/* pressure signal-to-noise ratio */
+#define SN_WIDTH	100		/* width signal-to-noise ratio */
+#define SN_COORD	250		/* coordinate signal-to-noise ratio */
+
+/* device constants */
+static const struct bcm5974_config bcm5974_config_table[] = {
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
+		0x84, sizeof(struct bt_data),
+		0x81, sizeof(struct tp_data),
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4824, 5342 },
+		{ DIM_Y, DIM_Y / SN_COORD, -172, 5820 }
+	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
+		0x84, sizeof(struct bt_data),
+		0x81, sizeof(struct tp_data),
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4824, 4824 },
+		{ DIM_Y, DIM_Y / SN_COORD, -172, 4290 }
+	},
+	{}
+};
+
+/* return the device-specific configuration by device */
+static const struct bcm5974_config *bcm5974_get_config(struct usb_device *udev)
+{
+	u16 id = le16_to_cpu(udev->descriptor.idProduct);
+	const struct bcm5974_config *cfg;
+
+	for (cfg = bcm5974_config_table; cfg->ansi; ++cfg)
+		if (cfg->ansi == id || cfg->iso == id || cfg->jis == id)
+			return cfg;
+
+	return bcm5974_config_table;
+}
+
+/* convert 16-bit little endian to signed integer */
+static inline int raw2int(__le16 x)
+{
+	return (signed short)le16_to_cpu(x);
+}
+
+/* scale device data to logical dimensions (asserts devmin < devmax) */
+static inline int int2scale(const struct bcm5974_param *p, int x)
+{
+	return x * p->dim / (p->devmax - p->devmin);
+}
+
+/* all logical value ranges are [0,dim). */
+static inline int int2bound(const struct bcm5974_param *p, int x)
+{
+	int s = int2scale(p, x);
+
+	return clamp_val(s, 0, p->dim - 1);
+}
+
+/* setup which logical events to report */
+static void setup_events_to_report(struct input_dev *input_dev,
+				   const struct bcm5974_config *cfg)
+{
+	__set_bit(EV_ABS, input_dev->evbit);
+
+	input_set_abs_params(input_dev, ABS_PRESSURE,
+				0, cfg->p.dim, cfg->p.fuzz, 0);
+	input_set_abs_params(input_dev, ABS_TOOL_WIDTH,
+				0, cfg->w.dim, cfg->w.fuzz, 0);
+	input_set_abs_params(input_dev, ABS_X,
+				0, cfg->x.dim, cfg->x.fuzz, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+				0, cfg->y.dim, cfg->y.fuzz, 0);
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+	__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+	__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+	__set_bit(BTN_LEFT, input_dev->keybit);
+}
+
+/* report button data as logical button state */
+static int report_bt_state(struct bcm5974 *dev, int size)
+{
+	if (size != sizeof(struct bt_data))
+		return -EIO;
+
+	input_report_key(dev->input, BTN_LEFT, dev->bt_data->button);
+	input_sync(dev->input);
+
+	return 0;
+}
+
+/* report trackpad data as logical trackpad state */
+static int report_tp_state(struct bcm5974 *dev, int size)
+{
+	const struct bcm5974_config *c = &dev->cfg;
+	const struct tp_finger *f = dev->tp_data->finger;
+	struct input_dev *input = dev->input;
+	const int fingers = (size - 26) / 28;
+	int p = 0, w, x, y, n = 0;
+
+	if (size < 26 || (size - 26) % 28 != 0)
+		return -EIO;
+
+	if (fingers) {
+		p = raw2int(f->force_major);
+		w = raw2int(f->size_major);
+		x = raw2int(f->abs_x);
+		y = raw2int(f->abs_y);
+		n = p > 0 ? fingers : 0;
+
+		dprintk(9,
+			"bcm5974: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
+			p, w, x, y, n);
+
+		input_report_abs(input, ABS_TOOL_WIDTH, int2bound(&c->w, w));
+		input_report_abs(input, ABS_X, int2bound(&c->x, x - c->x.devmin));
+		input_report_abs(input, ABS_Y, int2bound(&c->y, c->y.devmax - y));
+	}
+
+	input_report_abs(input, ABS_PRESSURE, int2bound(&c->p, p));
+
+	input_report_key(input, BTN_TOOL_FINGER, n == 1);
+	input_report_key(input, BTN_TOOL_DOUBLETAP, n == 2);
+	input_report_key(input, BTN_TOOL_TRIPLETAP, n > 2);
+
+	input_sync(input);
+
+	return 0;
+}
+
+/* Wellspring initialization constants */
+#define BCM5974_WELLSPRING_MODE_READ_REQUEST_ID		1
+#define BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID	9
+#define BCM5974_WELLSPRING_MODE_REQUEST_VALUE		0x300
+#define BCM5974_WELLSPRING_MODE_REQUEST_INDEX		0
+#define BCM5974_WELLSPRING_MODE_VENDOR_VALUE		0x01
+
+static int bcm5974_wellspring_mode(struct bcm5974 *dev)
+{
+	char *data = kmalloc(8, GFP_KERNEL);
+	int retval = 0, size;
+
+	if (!data) {
+		err("bcm5974: out of memory");
+		retval = -ENOMEM;
+		goto out;
+	}
+
+	/* read configuration */
+	size = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+			BCM5974_WELLSPRING_MODE_READ_REQUEST_ID,
+			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			BCM5974_WELLSPRING_MODE_REQUEST_VALUE,
+			BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
+
+	if (size != 8) {
+		err("bcm5974: could not read from device");
+		retval = -EIO;
+		goto out;
+	}
+
+	/* apply the mode switch */
+	data[0] = BCM5974_WELLSPRING_MODE_VENDOR_VALUE;
+
+	/* write configuration */
+	size = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+			BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID,
+			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			BCM5974_WELLSPRING_MODE_REQUEST_VALUE,
+			BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
+
+	if (size != 8) {
+		err("bcm5974: could not write to device");
+		retval = -EIO;
+		goto out;
+	}
+
+	dprintk(2, "bcm5974: switched to wellspring mode.\n");
+
+ out:
+	kfree(data);
+	return retval;
+}
+
+static void bcm5974_irq_button(struct urb *urb)
+{
+	struct bcm5974 *dev = urb->context;
+	int error;
+
+	switch (urb->status) {
+	case 0:
+		break;
+	case -EOVERFLOW:
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		dbg("bcm5974: button urb shutting down: %d", urb->status);
+		return;
+	default:
+		dbg("bcm5974: button urb status: %d", urb->status);
+		goto exit;
+	}
+
+	if (report_bt_state(dev, dev->bt_urb->actual_length))
+		dprintk(1, "bcm5974: bad button package, length: %d\n",
+			dev->bt_urb->actual_length);
+
+exit:
+	error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC);
+	if (error)
+		err("bcm5974: button urb failed: %d", error);
+}
+
+static void bcm5974_irq_trackpad(struct urb *urb)
+{
+	struct bcm5974 *dev = urb->context;
+	int error;
+
+	switch (urb->status) {
+	case 0:
+		break;
+	case -EOVERFLOW:
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		dbg("bcm5974: trackpad urb shutting down: %d", urb->status);
+		return;
+	default:
+		dbg("bcm5974: trackpad urb status: %d", urb->status);
+		goto exit;
+	}
+
+	/* control response ignored */
+	if (dev->tp_urb->actual_length == 2)
+		goto exit;
+
+	if (report_tp_state(dev, dev->tp_urb->actual_length))
+		dprintk(1, "bcm5974: bad trackpad package, length: %d\n",
+			dev->tp_urb->actual_length);
+
+exit:
+	error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC);
+	if (error)
+		err("bcm5974: trackpad urb failed: %d", error);
+}
+
+/*
+ * The Wellspring trackpad, like many recent Apple trackpads, share
+ * the usb device with the keyboard. Since keyboards are usually
+ * handled by the HID system, the device ends up being handled by two
+ * modules. Setting up the device therefore becomes slightly
+ * complicated. To enable multitouch features, a mode switch is
+ * required, which is usually applied via the control interface of the
+ * device.  It can be argued where this switch should take place. In
+ * some drivers, like appletouch, the switch is made during
+ * probe. However, the hid module may also alter the state of the
+ * device, resulting in trackpad malfunction under certain
+ * circumstances. To get around this problem, there is at least one
+ * example that utilizes the USB_QUIRK_RESET_RESUME quirk in order to
+ * recieve a reset_resume request rather than the normal resume.
+ * Since the implementation of reset_resume is equal to mode switch
+ * plus start_traffic, it seems easier to always do the switch when
+ * starting traffic on the device.
+ */
+static int bcm5974_start_traffic(struct bcm5974 *dev)
+{
+	if (bcm5974_wellspring_mode(dev)) {
+		dprintk(1, "bcm5974: mode switch failed\n");
+		goto error;
+	}
+
+	if (usb_submit_urb(dev->bt_urb, GFP_KERNEL))
+		goto error;
+
+	if (usb_submit_urb(dev->tp_urb, GFP_KERNEL))
+		goto err_kill_bt;
+
+	return 0;
+
+err_kill_bt:
+	usb_kill_urb(dev->bt_urb);
+error:
+	return -EIO;
+}
+
+static void bcm5974_pause_traffic(struct bcm5974 *dev)
+{
+	usb_kill_urb(dev->tp_urb);
+	usb_kill_urb(dev->bt_urb);
+}
+
+/*
+ * The code below implements open/close and manual suspend/resume.
+ * All functions may be called in random order.
+ *
+ * Opening a suspended device fails with EACCES - permission denied.
+ *
+ * Failing a resume leaves the device resumed but closed.
+ */
+static int bcm5974_open(struct input_dev *input)
+{
+	struct bcm5974 *dev = input_get_drvdata(input);
+	int error;
+
+	error = usb_autopm_get_interface(dev->intf);
+	if (error)
+		return error;
+
+	mutex_lock(&dev->pm_mutex);
+
+	error = bcm5974_start_traffic(dev);
+	if (!error)
+		dev->opened = 1;
+
+	mutex_unlock(&dev->pm_mutex);
+
+	if (error)
+		usb_autopm_put_interface(dev->intf);
+
+	return error;
+}
+
+static void bcm5974_close(struct input_dev *input)
+{
+	struct bcm5974 *dev = input_get_drvdata(input);
+
+	mutex_lock(&dev->pm_mutex);
+
+	bcm5974_pause_traffic(dev);
+	dev->opened = 0;
+
+	mutex_unlock(&dev->pm_mutex);
+
+	usb_autopm_put_interface(dev->intf);
+}
+
+static int bcm5974_suspend(struct usb_interface *iface, pm_message_t message)
+{
+	struct bcm5974 *dev = usb_get_intfdata(iface);
+
+	mutex_lock(&dev->pm_mutex);
+
+	if (dev->opened)
+		bcm5974_pause_traffic(dev);
+
+	mutex_unlock(&dev->pm_mutex);
+
+	return 0;
+}
+
+static int bcm5974_resume(struct usb_interface *iface)
+{
+	struct bcm5974 *dev = usb_get_intfdata(iface);
+	int error = 0;
+
+	mutex_lock(&dev->pm_mutex);
+
+	if (dev->opened)
+		error = bcm5974_start_traffic(dev);
+
+	mutex_unlock(&dev->pm_mutex);
+
+	return error;
+}
+
+static int bcm5974_probe(struct usb_interface *iface,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(iface);
+	const struct bcm5974_config *cfg;
+	struct bcm5974 *dev;
+	struct input_dev *input_dev;
+	int error = -ENOMEM;
+
+	/* find the product index */
+	cfg = bcm5974_get_config(udev);
+
+	/* allocate memory for our device state and initialize it */
+	dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!dev || !input_dev) {
+		err("bcm5974: out of memory");
+		goto err_free_devs;
+	}
+
+	dev->udev = udev;
+	dev->intf = iface;
+	dev->input = input_dev;
+	dev->cfg = *cfg;
+	mutex_init(&dev->pm_mutex);
+
+	/* setup urbs */
+	dev->bt_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->bt_urb)
+		goto err_free_devs;
+
+	dev->tp_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->tp_urb)
+		goto err_free_bt_urb;
+
+	dev->bt_data = usb_buffer_alloc(dev->udev,
+					dev->cfg.bt_datalen, GFP_KERNEL,
+					&dev->bt_urb->transfer_dma);
+	if (!dev->bt_data)
+		goto err_free_urb;
+
+	dev->tp_data = usb_buffer_alloc(dev->udev,
+					dev->cfg.tp_datalen, GFP_KERNEL,
+					&dev->tp_urb->transfer_dma);
+	if (!dev->tp_data)
+		goto err_free_bt_buffer;
+
+	usb_fill_int_urb(dev->bt_urb, udev,
+			 usb_rcvintpipe(udev, cfg->bt_ep),
+			 dev->bt_data, dev->cfg.bt_datalen,
+			 bcm5974_irq_button, dev, 1);
+
+	usb_fill_int_urb(dev->tp_urb, udev,
+			 usb_rcvintpipe(udev, cfg->tp_ep),
+			 dev->tp_data, dev->cfg.tp_datalen,
+			 bcm5974_irq_trackpad, dev, 1);
+
+	/* create bcm5974 device */
+	usb_make_path(udev, dev->phys, sizeof(dev->phys));
+	strlcat(dev->phys, "/input0", sizeof(dev->phys));
+
+	input_dev->name = "bcm5974";
+	input_dev->phys = dev->phys;
+	usb_to_input_id(dev->udev, &input_dev->id);
+	input_dev->dev.parent = &iface->dev;
+
+	input_set_drvdata(input_dev, dev);
+
+	input_dev->open = bcm5974_open;
+	input_dev->close = bcm5974_close;
+
+	setup_events_to_report(input_dev, cfg);
+
+	error = input_register_device(dev->input);
+	if (error)
+		goto err_free_buffer;
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(iface, dev);
+
+	return 0;
+
+err_free_buffer:
+	usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
+		dev->tp_data, dev->tp_urb->transfer_dma);
+err_free_bt_buffer:
+	usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
+		dev->bt_data, dev->bt_urb->transfer_dma);
+err_free_urb:
+	usb_free_urb(dev->tp_urb);
+err_free_bt_urb:
+	usb_free_urb(dev->bt_urb);
+err_free_devs:
+	usb_set_intfdata(iface, NULL);
+	input_free_device(input_dev);
+	kfree(dev);
+	return error;
+}
+
+static void bcm5974_disconnect(struct usb_interface *iface)
+{
+	struct bcm5974 *dev = usb_get_intfdata(iface);
+
+	usb_set_intfdata(iface, NULL);
+
+	input_unregister_device(dev->input);
+	usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
+			dev->tp_data, dev->tp_urb->transfer_dma);
+	usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
+			dev->bt_data, dev->bt_urb->transfer_dma);
+	usb_free_urb(dev->tp_urb);
+	usb_free_urb(dev->bt_urb);
+	kfree(dev);
+}
+
+static struct usb_driver bcm5974_driver = {
+	.name			= "bcm5974",
+	.probe			= bcm5974_probe,
+	.disconnect		= bcm5974_disconnect,
+	.suspend		= bcm5974_suspend,
+	.resume			= bcm5974_resume,
+	.reset_resume		= bcm5974_resume,
+	.id_table		= bcm5974_table,
+	.supports_autosuspend	= 1,
+};
+
+static int __init bcm5974_init(void)
+{
+	return usb_register(&bcm5974_driver);
+}
+
+static void __exit bcm5974_exit(void)
+{
+	usb_deregister(&bcm5974_driver);
+}
+
+module_init(bcm5974_init);
+module_exit(bcm5974_exit);
+
diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h
index 66bafe308b0..692a79ec2a2 100644
--- a/drivers/input/serio/i8042-sparcio.h
+++ b/drivers/input/serio/i8042-sparcio.h
@@ -1,10 +1,11 @@
 #ifndef _I8042_SPARCIO_H
 #define _I8042_SPARCIO_H
 
+#include <linux/of_device.h>
+
 #include <asm/io.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 static int i8042_kbd_irq = -1;
 static int i8042_aux_irq = -1;
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index fe732a574ec..3282b741e24 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -394,6 +394,13 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"),
 		},
 	},
+	{
+		.ident = "Acer TravelMate 4280",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4280"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index 0ed044d5e68..765007899d9 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -269,8 +269,8 @@ static int xps2_setup(struct device *dev, struct resource *regs_res,
 	 * we have the PS2 in a good state */
 	out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET);
 
-	dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%08X, irq=%d\n",
-		drvdata->phys_addr, (u32)drvdata->base_address, drvdata->irq);
+	dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%p, irq=%d\n",
+		drvdata->phys_addr, drvdata->base_address, drvdata->irq);
 
 	serio = &drvdata->serio;
 	serio->id.type = SERIO_8042;
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 6e60a97a234..25287e80e23 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -249,29 +249,26 @@ config TOUCHSCREEN_WM97XX
 config TOUCHSCREEN_WM9705
 	bool "WM9705 Touchscreen interface support"
 	depends on TOUCHSCREEN_WM97XX
+	default y
 	help
-	  Say Y here if you have a Wolfson Microelectronics WM9705
-	  touchscreen controller connected to your system.
-
-	  If unsure, say N.
+	  Say Y here to enable support for the Wolfson Microelectronics
+	  WM9705 touchscreen controller.
 
 config TOUCHSCREEN_WM9712
 	bool "WM9712 Touchscreen interface support"
 	depends on TOUCHSCREEN_WM97XX
+	default y
 	help
-	  Say Y here if you have a Wolfson Microelectronics WM9712
-	  touchscreen controller connected to your system.
-
-	  If unsure, say N.
+	  Say Y here to enable support for the Wolfson Microelectronics
+	  WM9712 touchscreen controller.
 
 config TOUCHSCREEN_WM9713
 	bool "WM9713 Touchscreen interface support"
 	depends on TOUCHSCREEN_WM97XX
+	default y
 	help
-	  Say Y here if you have a Wolfson Microelectronics WM9713 touchscreen
-	  controller connected to your system.
-
-	  If unsure, say N.
+	  Say Y here to enable support for the Wolfson Microelectronics
+	  WM9713 touchscreen controller.
 
 config TOUCHSCREEN_WM97XX_MAINSTONE
 	tristate "WM97xx Mainstone accelerated touch"
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index d93500f24fb..81d0c605344 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -108,9 +108,8 @@ static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
 }
 /*:*/
 
-/*M:014 get_pfn is slow; it takes the mmap sem and calls get_user_pages.  We
- * could probably try to grab batches of pages here as an optimization
- * (ie. pre-faulting). :*/
+/*M:014 get_pfn is slow: we could probably try to grab batches of pages here as
+ * an optimization (ie. pre-faulting). :*/
 
 /*H:350 This routine takes a page number given by the Guest and converts it to
  * an actual, physical page number.  It can fail for several reasons: the
@@ -123,19 +122,13 @@ static unsigned long gpte_addr(pgd_t gpgd, unsigned long vaddr)
 static unsigned long get_pfn(unsigned long virtpfn, int write)
 {
 	struct page *page;
-	/* This value indicates failure. */
-	unsigned long ret = -1UL;
 
-	/* get_user_pages() is a complex interface: it gets the "struct
-	 * vm_area_struct" and "struct page" assocated with a range of pages.
-	 * It also needs the task's mmap_sem held, and is not very quick.
-	 * It returns the number of pages it got. */
-	down_read(&current->mm->mmap_sem);
-	if (get_user_pages(current, current->mm, virtpfn << PAGE_SHIFT,
-			   1, write, 1, &page, NULL) == 1)
-		ret = page_to_pfn(page);
-	up_read(&current->mm->mmap_sem);
-	return ret;
+	/* gup me one page at this address please! */
+	if (get_user_pages_fast(virtpfn << PAGE_SHIFT, 1, write, &page) == 1)
+		return page_to_pfn(page);
+
+	/* This value indicates failure. */
+	return -1UL;
 }
 
 /*H:340 Converting a Guest page table entry to a shadow (ie. real) page table
@@ -174,7 +167,7 @@ static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
 /*H:460 And to complete the chain, release_pte() looks like this: */
 static void release_pte(pte_t pte)
 {
-	/* Remember that get_user_pages() took a reference to the page, in
+	/* Remember that get_user_pages_fast() took a reference to the page, in
 	 * get_pfn()?  We have to put it back now. */
 	if (pte_flags(pte) & _PAGE_PRESENT)
 		put_page(pfn_to_page(pte_pfn(pte)));
diff --git a/drivers/md/md.c b/drivers/md/md.c
index c7aae66c6f9..8cfadc5bd2b 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2393,6 +2393,8 @@ static void analyze_sbs(mddev_t * mddev)
 
 }
 
+static void md_safemode_timeout(unsigned long data);
+
 static ssize_t
 safe_delay_show(mddev_t *mddev, char *page)
 {
@@ -2432,9 +2434,12 @@ safe_delay_store(mddev_t *mddev, const char *cbuf, size_t len)
 	if (msec == 0)
 		mddev->safemode_delay = 0;
 	else {
+		unsigned long old_delay = mddev->safemode_delay;
 		mddev->safemode_delay = (msec*HZ)/1000;
 		if (mddev->safemode_delay == 0)
 			mddev->safemode_delay = 1;
+		if (mddev->safemode_delay < old_delay)
+			md_safemode_timeout((unsigned long)mddev);
 	}
 	return len;
 }
@@ -4634,6 +4639,11 @@ static int update_size(mddev_t *mddev, sector_t num_sectors)
 	 */
 	if (mddev->sync_thread)
 		return -EBUSY;
+	if (mddev->bitmap)
+		/* Sorry, cannot grow a bitmap yet, just remove it,
+		 * grow, and re-add.
+		 */
+		return -EBUSY;
 	rdev_for_each(rdev, tmp, mddev) {
 		sector_t avail;
 		avail = rdev->size * 2;
@@ -5993,7 +6003,7 @@ static int remove_and_add_spares(mddev_t *mddev)
 			}
 		}
 
-	if (mddev->degraded) {
+	if (mddev->degraded && ! mddev->ro) {
 		rdev_for_each(rdev, rtmp, mddev) {
 			if (rdev->raid_disk >= 0 &&
 			    !test_bit(In_sync, &rdev->flags) &&
@@ -6067,6 +6077,8 @@ void md_check_recovery(mddev_t *mddev)
 		flush_signals(current);
 	}
 
+	if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
+		return;
 	if ( ! (
 		(mddev->flags && !mddev->external) ||
 		test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
@@ -6080,6 +6092,15 @@ void md_check_recovery(mddev_t *mddev)
 	if (mddev_trylock(mddev)) {
 		int spares = 0;
 
+		if (mddev->ro) {
+			/* Only thing we do on a ro array is remove
+			 * failed devices.
+			 */
+			remove_and_add_spares(mddev);
+			clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+			goto unlock;
+		}
+
 		if (!mddev->external) {
 			int did_change = 0;
 			spin_lock_irq(&mddev->write_lock);
@@ -6117,7 +6138,8 @@ void md_check_recovery(mddev_t *mddev)
 			/* resync has finished, collect result */
 			md_unregister_thread(mddev->sync_thread);
 			mddev->sync_thread = NULL;
-			if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
+			if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
+			    !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
 				/* success...*/
 				/* activate any spares */
 				if (mddev->pers->spare_active(mddev))
@@ -6169,6 +6191,7 @@ void md_check_recovery(mddev_t *mddev)
 		} else if ((spares = remove_and_add_spares(mddev))) {
 			clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
 			clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
+			clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
 			set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
 		} else if (mddev->recovery_cp < MaxSector) {
 			set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
@@ -6232,7 +6255,11 @@ static int md_notify_reboot(struct notifier_block *this,
 
 		for_each_mddev(mddev, tmp)
 			if (mddev_trylock(mddev)) {
-				do_md_stop (mddev, 1, 0);
+				/* Force a switch to readonly even array
+				 * appears to still be in use.  Hence
+				 * the '100'.
+				 */
+				do_md_stop (mddev, 1, 100);
 				mddev_unlock(mddev);
 			}
 		/*
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index d41bebb6da0..e34cd0e6247 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -76,11 +76,13 @@ static void r10bio_pool_free(void *r10_bio, void *data)
 	kfree(r10_bio);
 }
 
+/* Maximum size of each resync request */
 #define RESYNC_BLOCK_SIZE (64*1024)
-//#define RESYNC_BLOCK_SIZE PAGE_SIZE
-#define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9)
 #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
-#define RESYNC_WINDOW (2048*1024)
+/* amount of memory to reserve for resync requests */
+#define RESYNC_WINDOW (1024*1024)
+/* maximum number of concurrent requests, memory permitting */
+#define RESYNC_DEPTH (32*1024*1024/RESYNC_BLOCK_SIZE)
 
 /*
  * When performing a resync, we need to read and compare, so
@@ -690,7 +692,6 @@ static int flush_pending_writes(conf_t *conf)
  *    there is no normal IO happeing.  It must arrange to call
  *    lower_barrier when the particular background IO completes.
  */
-#define RESYNC_DEPTH 32
 
 static void raise_barrier(conf_t *conf, int force)
 {
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 40e93967565..224de022e7c 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2568,10 +2568,10 @@ static bool handle_stripe5(struct stripe_head *sh)
 		if (dev->written)
 			s.written++;
 		rdev = rcu_dereference(conf->disks[i].rdev);
-		if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+		if (blocked_rdev == NULL &&
+		    rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
 			blocked_rdev = rdev;
 			atomic_inc(&rdev->nr_pending);
-			break;
 		}
 		if (!rdev || !test_bit(In_sync, &rdev->flags)) {
 			/* The ReadError flag will just be confusing now */
@@ -2588,8 +2588,14 @@ static bool handle_stripe5(struct stripe_head *sh)
 	rcu_read_unlock();
 
 	if (unlikely(blocked_rdev)) {
-		set_bit(STRIPE_HANDLE, &sh->state);
-		goto unlock;
+		if (s.syncing || s.expanding || s.expanded ||
+		    s.to_write || s.written) {
+			set_bit(STRIPE_HANDLE, &sh->state);
+			goto unlock;
+		}
+		/* There is nothing for the blocked_rdev to block */
+		rdev_dec_pending(blocked_rdev, conf->mddev);
+		blocked_rdev = NULL;
 	}
 
 	if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) {
@@ -2832,10 +2838,10 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
 		if (dev->written)
 			s.written++;
 		rdev = rcu_dereference(conf->disks[i].rdev);
-		if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+		if (blocked_rdev == NULL &&
+		    rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
 			blocked_rdev = rdev;
 			atomic_inc(&rdev->nr_pending);
-			break;
 		}
 		if (!rdev || !test_bit(In_sync, &rdev->flags)) {
 			/* The ReadError flag will just be confusing now */
@@ -2853,9 +2859,16 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
 	rcu_read_unlock();
 
 	if (unlikely(blocked_rdev)) {
-		set_bit(STRIPE_HANDLE, &sh->state);
-		goto unlock;
+		if (s.syncing || s.expanding || s.expanded ||
+		    s.to_write || s.written) {
+			set_bit(STRIPE_HANDLE, &sh->state);
+			goto unlock;
+		}
+		/* There is nothing for the blocked_rdev to block */
+		rdev_dec_pending(blocked_rdev, conf->mddev);
+		blocked_rdev = NULL;
 	}
+
 	pr_debug("locked=%d uptodate=%d to_read=%d"
 	       " to_write=%d failed=%d failed_num=%d,%d\n",
 	       s.locked, s.uptodate, s.to_read, s.to_write, s.failed,
@@ -4446,6 +4459,9 @@ static int raid5_check_reshape(mddev_t *mddev)
 		return -EINVAL; /* Cannot shrink array or change level yet */
 	if (mddev->delta_disks == 0)
 		return 0; /* nothing to do */
+	if (mddev->bitmap)
+		/* Cannot grow a bitmap yet */
+		return -EBUSY;
 
 	/* Can only proceed if there are plenty of stripe_heads.
 	 * We need a minimum of one full stripe,, and for sensible progress
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 883e7ea31de..10c44d3fe01 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -50,10 +50,31 @@ config HTC_PASIC3
 	  HTC Magician devices, respectively. Actual functionality is
 	  handled by the leds-pasic3 and ds1wm drivers.
 
+config MFD_TMIO
+	bool
+	default n
+
+config MFD_T7L66XB
+	bool "Support Toshiba T7L66XB"
+	depends on ARM
+	select MFD_CORE
+	select MFD_TMIO
+	help
+	  Support for Toshiba Mobile IO Controller T7L66XB
+
+config MFD_TC6387XB
+	bool "Support Toshiba TC6387XB"
+	depends on ARM
+	select MFD_CORE
+	select MFD_TMIO
+	help
+	  Support for Toshiba Mobile IO Controller TC6387XB
+
 config MFD_TC6393XB
 	bool "Support Toshiba TC6393XB"
 	depends on GPIOLIB && ARM
 	select MFD_CORE
+	select MFD_TMIO
 	help
 	  Support for Toshiba Mobile IO Controller TC6393XB
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 33daa2f45dd..03ad239ecef 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -8,6 +8,8 @@ obj-$(CONFIG_MFD_ASIC3)		+= asic3.o
 obj-$(CONFIG_HTC_EGPIO)		+= htc-egpio.o
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
 
+obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o
+obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o
 obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
new file mode 100644
index 00000000000..49a0fffc02a
--- /dev/null
+++ b/drivers/mfd/t7l66xb.c
@@ -0,0 +1,419 @@
+/*
+ *
+ * Toshiba T7L66XB core mfd support
+ *
+ * Copyright (c) 2005, 2007, 2008 Ian Molton
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * T7L66 features:
+ *
+ * Supported in this driver:
+ * SD/MMC
+ * SM/NAND flash controller
+ *
+ * As yet not supported
+ * GPIO interface (on NAND pins)
+ * Serial interface
+ * TFT 'interface converter'
+ * PCMCIA interface logic
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mfd/t7l66xb.h>
+
+enum {
+	T7L66XB_CELL_NAND,
+	T7L66XB_CELL_MMC,
+};
+
+#define SCR_REVID	0x08		/* b Revision ID	*/
+#define SCR_IMR		0x42		/* b Interrupt Mask	*/
+#define SCR_DEV_CTL	0xe0		/* b Device control	*/
+#define SCR_ISR		0xe1		/* b Interrupt Status	*/
+#define SCR_GPO_OC	0xf0		/* b GPO output control	*/
+#define SCR_GPO_OS	0xf1		/* b GPO output enable	*/
+#define SCR_GPI_S	0xf2		/* w GPI status		*/
+#define SCR_APDC	0xf8		/* b Active pullup down ctrl */
+
+#define SCR_DEV_CTL_USB		BIT(0)	/* USB enable		*/
+#define SCR_DEV_CTL_MMC		BIT(1)	/* MMC enable		*/
+
+/*--------------------------------------------------------------------------*/
+
+struct t7l66xb {
+	void __iomem		*scr;
+	/* Lock to protect registers requiring read/modify/write ops. */
+	spinlock_t		lock;
+
+	struct resource		rscr;
+	int			irq;
+	int			irq_base;
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int t7l66xb_mmc_enable(struct platform_device *mmc)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct t7l66xb_platform_data   *pdata = dev->dev.platform_data;
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	unsigned long flags;
+	u8 dev_ctl;
+
+	if (pdata->enable_clk32k)
+		pdata->enable_clk32k(dev);
+
+	spin_lock_irqsave(&t7l66xb->lock, flags);
+
+	dev_ctl = tmio_ioread8(t7l66xb->scr + SCR_DEV_CTL);
+	dev_ctl |= SCR_DEV_CTL_MMC;
+	tmio_iowrite8(dev_ctl, t7l66xb->scr + SCR_DEV_CTL);
+
+	spin_unlock_irqrestore(&t7l66xb->lock, flags);
+
+	return 0;
+}
+
+static int t7l66xb_mmc_disable(struct platform_device *mmc)
+{
+	struct platform_device *dev = to_platform_device(mmc->dev.parent);
+	struct t7l66xb_platform_data   *pdata = dev->dev.platform_data;
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	unsigned long flags;
+	u8 dev_ctl;
+
+	spin_lock_irqsave(&t7l66xb->lock, flags);
+
+	dev_ctl = tmio_ioread8(t7l66xb->scr + SCR_DEV_CTL);
+	dev_ctl &= ~SCR_DEV_CTL_MMC;
+	tmio_iowrite8(dev_ctl, t7l66xb->scr + SCR_DEV_CTL);
+
+	spin_unlock_irqrestore(&t7l66xb->lock, flags);
+
+	if (pdata->disable_clk32k)
+		pdata->disable_clk32k(dev);
+
+	return 0;
+}
+
+/*--------------------------------------------------------------------------*/
+
+const static struct resource t7l66xb_mmc_resources[] = {
+	{
+		.start = 0x800,
+		.end	= 0x9ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x200,
+		.end	= 0x2ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_T7L66XB_MMC,
+		.end	= IRQ_T7L66XB_MMC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+const static struct resource t7l66xb_nand_resources[] = {
+	{
+		.start	= 0xc00,
+		.end	= 0xc07,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x0100,
+		.end	= 0x01ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_T7L66XB_NAND,
+		.end	= IRQ_T7L66XB_NAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell t7l66xb_cells[] = {
+	[T7L66XB_CELL_MMC] = {
+		.name = "tmio-mmc",
+		.enable = t7l66xb_mmc_enable,
+		.disable = t7l66xb_mmc_disable,
+		.num_resources = ARRAY_SIZE(t7l66xb_mmc_resources),
+		.resources = t7l66xb_mmc_resources,
+	},
+	[T7L66XB_CELL_NAND] = {
+		.name = "tmio-nand",
+		.num_resources = ARRAY_SIZE(t7l66xb_nand_resources),
+		.resources = t7l66xb_nand_resources,
+	},
+};
+
+/*--------------------------------------------------------------------------*/
+
+/* Handle the T7L66XB interrupt mux */
+static void t7l66xb_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct t7l66xb *t7l66xb = get_irq_data(irq);
+	unsigned int isr;
+	unsigned int i, irq_base;
+
+	irq_base = t7l66xb->irq_base;
+
+	while ((isr = tmio_ioread8(t7l66xb->scr + SCR_ISR) &
+				~tmio_ioread8(t7l66xb->scr + SCR_IMR)))
+		for (i = 0; i < T7L66XB_NR_IRQS; i++)
+			if (isr & (1 << i))
+				generic_handle_irq(irq_base + i);
+}
+
+static void t7l66xb_irq_mask(unsigned int irq)
+{
+	struct t7l66xb *t7l66xb = get_irq_chip_data(irq);
+	unsigned long			flags;
+	u8 imr;
+
+	spin_lock_irqsave(&t7l66xb->lock, flags);
+	imr = tmio_ioread8(t7l66xb->scr + SCR_IMR);
+	imr |= 1 << (irq - t7l66xb->irq_base);
+	tmio_iowrite8(imr, t7l66xb->scr + SCR_IMR);
+	spin_unlock_irqrestore(&t7l66xb->lock, flags);
+}
+
+static void t7l66xb_irq_unmask(unsigned int irq)
+{
+	struct t7l66xb *t7l66xb = get_irq_chip_data(irq);
+	unsigned long flags;
+	u8 imr;
+
+	spin_lock_irqsave(&t7l66xb->lock, flags);
+	imr = tmio_ioread8(t7l66xb->scr + SCR_IMR);
+	imr &= ~(1 << (irq - t7l66xb->irq_base));
+	tmio_iowrite8(imr, t7l66xb->scr + SCR_IMR);
+	spin_unlock_irqrestore(&t7l66xb->lock, flags);
+}
+
+static struct irq_chip t7l66xb_chip = {
+	.name	= "t7l66xb",
+	.ack	= t7l66xb_irq_mask,
+	.mask	= t7l66xb_irq_mask,
+	.unmask	= t7l66xb_irq_unmask,
+};
+
+/*--------------------------------------------------------------------------*/
+
+/* Install the IRQ handler */
+static void t7l66xb_attach_irq(struct platform_device *dev)
+{
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	unsigned int irq, irq_base;
+
+	irq_base = t7l66xb->irq_base;
+
+	for (irq = irq_base; irq < irq_base + T7L66XB_NR_IRQS; irq++) {
+		set_irq_chip(irq, &t7l66xb_chip);
+		set_irq_chip_data(irq, t7l66xb);
+		set_irq_handler(irq, handle_level_irq);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+#endif
+	}
+
+	set_irq_type(t7l66xb->irq, IRQ_TYPE_EDGE_FALLING);
+	set_irq_data(t7l66xb->irq, t7l66xb);
+	set_irq_chained_handler(t7l66xb->irq, t7l66xb_irq);
+}
+
+static void t7l66xb_detach_irq(struct platform_device *dev)
+{
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	unsigned int irq, irq_base;
+
+	irq_base = t7l66xb->irq_base;
+
+	set_irq_chained_handler(t7l66xb->irq, NULL);
+	set_irq_data(t7l66xb->irq, NULL);
+
+	for (irq = irq_base; irq < irq_base + T7L66XB_NR_IRQS; irq++) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#endif
+		set_irq_chip(irq, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+static int t7l66xb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
+
+	if (pdata && pdata->suspend)
+		pdata->suspend(dev);
+
+	return 0;
+}
+
+static int t7l66xb_resume(struct platform_device *dev)
+{
+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
+
+	if (pdata && pdata->resume)
+		pdata->resume(dev);
+
+	return 0;
+}
+#else
+#define t7l66xb_suspend NULL
+#define t7l66xb_resume	NULL
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+static int t7l66xb_probe(struct platform_device *dev)
+{
+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
+	struct t7l66xb *t7l66xb;
+	struct resource *iomem, *rscr;
+	int ret;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!iomem)
+		return -EINVAL;
+
+	t7l66xb = kzalloc(sizeof *t7l66xb, GFP_KERNEL);
+	if (!t7l66xb)
+		return -ENOMEM;
+
+	spin_lock_init(&t7l66xb->lock);
+
+	platform_set_drvdata(dev, t7l66xb);
+
+	ret = platform_get_irq(dev, 0);
+	if (ret >= 0)
+		t7l66xb->irq = ret;
+	else
+		goto err_noirq;
+
+	t7l66xb->irq_base = pdata->irq_base;
+
+	rscr = &t7l66xb->rscr;
+	rscr->name = "t7l66xb-core";
+	rscr->start = iomem->start;
+	rscr->end = iomem->start + 0xff;
+	rscr->flags = IORESOURCE_MEM;
+
+	ret = request_resource(iomem, rscr);
+	if (ret)
+		goto err_request_scr;
+
+	t7l66xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
+	if (!t7l66xb->scr) {
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	if (pdata && pdata->enable)
+		pdata->enable(dev);
+
+	/* Mask all interrupts */
+	tmio_iowrite8(0xbf, t7l66xb->scr + SCR_IMR);
+
+	printk(KERN_INFO "%s rev %d @ 0x%08lx, irq %d\n",
+		dev->name, tmio_ioread8(t7l66xb->scr + SCR_REVID),
+		(unsigned long)iomem->start, t7l66xb->irq);
+
+	t7l66xb_attach_irq(dev);
+
+	t7l66xb_cells[T7L66XB_CELL_NAND].driver_data = pdata->nand_data;
+	t7l66xb_cells[T7L66XB_CELL_NAND].platform_data =
+		&t7l66xb_cells[T7L66XB_CELL_NAND];
+	t7l66xb_cells[T7L66XB_CELL_NAND].data_size =
+		sizeof(t7l66xb_cells[T7L66XB_CELL_NAND]);
+
+	t7l66xb_cells[T7L66XB_CELL_MMC].platform_data =
+		&t7l66xb_cells[T7L66XB_CELL_MMC];
+	t7l66xb_cells[T7L66XB_CELL_MMC].data_size =
+		sizeof(t7l66xb_cells[T7L66XB_CELL_MMC]);
+
+	ret = mfd_add_devices(&dev->dev, dev->id,
+			      t7l66xb_cells, ARRAY_SIZE(t7l66xb_cells),
+			      iomem, t7l66xb->irq_base);
+
+	if (!ret)
+		return 0;
+
+	t7l66xb_detach_irq(dev);
+	iounmap(t7l66xb->scr);
+err_ioremap:
+	release_resource(&t7l66xb->rscr);
+err_noirq:
+err_request_scr:
+	kfree(t7l66xb);
+	return ret;
+}
+
+static int t7l66xb_remove(struct platform_device *dev)
+{
+	struct t7l66xb_platform_data *pdata = dev->dev.platform_data;
+	struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+	int ret;
+
+	ret = pdata->disable(dev);
+
+	t7l66xb_detach_irq(dev);
+	iounmap(t7l66xb->scr);
+	release_resource(&t7l66xb->rscr);
+	mfd_remove_devices(&dev->dev);
+	platform_set_drvdata(dev, NULL);
+	kfree(t7l66xb);
+
+	return ret;
+
+}
+
+static struct platform_driver t7l66xb_platform_driver = {
+	.driver = {
+		.name	= "t7l66xb",
+		.owner	= THIS_MODULE,
+	},
+	.suspend	= t7l66xb_suspend,
+	.resume		= t7l66xb_resume,
+	.probe		= t7l66xb_probe,
+	.remove		= t7l66xb_remove,
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int __init t7l66xb_init(void)
+{
+	int retval = 0;
+
+	retval = platform_driver_register(&t7l66xb_platform_driver);
+	return retval;
+}
+
+static void __exit t7l66xb_exit(void)
+{
+	platform_driver_unregister(&t7l66xb_platform_driver);
+}
+
+module_init(t7l66xb_init);
+module_exit(t7l66xb_exit);
+
+MODULE_DESCRIPTION("Toshiba T7L66XB core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton");
+MODULE_ALIAS("platform:t7l66xb");
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
new file mode 100644
index 00000000000..a22b21ac6cf
--- /dev/null
+++ b/drivers/mfd/tc6387xb.c
@@ -0,0 +1,181 @@
+/*
+ * Toshiba TC6387XB support
+ * Copyright (c) 2005 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains TC6387XB base support.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mfd/tc6387xb.h>
+
+enum {
+	TC6387XB_CELL_MMC,
+};
+
+#ifdef CONFIG_PM
+static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct tc6387xb_platform_data *pdata = platform_get_drvdata(dev);
+
+	if (pdata && pdata->suspend)
+		pdata->suspend(dev);
+
+	return 0;
+}
+
+static int tc6387xb_resume(struct platform_device *dev)
+{
+	struct tc6387xb_platform_data *pdata = platform_get_drvdata(dev);
+
+	if (pdata && pdata->resume)
+		pdata->resume(dev);
+
+	return 0;
+}
+#else
+#define tc6387xb_suspend  NULL
+#define tc6387xb_resume   NULL
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+static int tc6387xb_mmc_enable(struct platform_device *mmc)
+{
+	struct platform_device *dev      = to_platform_device(mmc->dev.parent);
+	struct tc6387xb_platform_data *tc6387xb = dev->dev.platform_data;
+
+	if (tc6387xb->enable_clk32k)
+		tc6387xb->enable_clk32k(dev);
+
+	return 0;
+}
+
+static int tc6387xb_mmc_disable(struct platform_device *mmc)
+{
+	struct platform_device *dev      = to_platform_device(mmc->dev.parent);
+	struct tc6387xb_platform_data *tc6387xb = dev->dev.platform_data;
+
+	if (tc6387xb->disable_clk32k)
+		tc6387xb->disable_clk32k(dev);
+
+	return 0;
+}
+
+/*--------------------------------------------------------------------------*/
+
+static struct resource tc6387xb_mmc_resources[] = {
+	{
+		.start = 0x800,
+		.end   = 0x9ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x200,
+		.end   = 0x2ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0,
+		.end   = 0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell tc6387xb_cells[] = {
+	[TC6387XB_CELL_MMC] = {
+		.name = "tmio-mmc",
+		.enable = tc6387xb_mmc_enable,
+		.disable = tc6387xb_mmc_disable,
+		.num_resources = ARRAY_SIZE(tc6387xb_mmc_resources),
+		.resources = tc6387xb_mmc_resources,
+	},
+};
+
+static int tc6387xb_probe(struct platform_device *dev)
+{
+	struct tc6387xb_platform_data *data = platform_get_drvdata(dev);
+	struct resource *iomem;
+	int irq, ret;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		ret = -EINVAL;
+		goto err_resource;
+	}
+
+	ret  = platform_get_irq(dev, 0);
+	if (ret >= 0)
+		irq = ret;
+	else
+		goto err_resource;
+
+	if (data && data->enable)
+		data->enable(dev);
+
+	printk(KERN_INFO "Toshiba tc6387xb initialised\n");
+
+	tc6387xb_cells[TC6387XB_CELL_MMC].platform_data =
+		&tc6387xb_cells[TC6387XB_CELL_MMC];
+	tc6387xb_cells[TC6387XB_CELL_MMC].data_size =
+		sizeof(tc6387xb_cells[TC6387XB_CELL_MMC]);
+
+	ret = mfd_add_devices(&dev->dev, dev->id, tc6387xb_cells,
+			      ARRAY_SIZE(tc6387xb_cells), iomem, irq);
+
+	if (!ret)
+		return 0;
+
+err_resource:
+	return ret;
+}
+
+static int tc6387xb_remove(struct platform_device *dev)
+{
+	struct tc6387xb_platform_data *data = platform_get_drvdata(dev);
+
+	if (data && data->disable)
+		data->disable(dev);
+
+	/* FIXME - free the resources! */
+
+	return 0;
+}
+
+
+static struct platform_driver tc6387xb_platform_driver = {
+	.driver = {
+		.name		= "tc6387xb",
+	},
+	.probe		= tc6387xb_probe,
+	.remove		= tc6387xb_remove,
+	.suspend        = tc6387xb_suspend,
+	.resume         = tc6387xb_resume,
+};
+
+
+static int __init tc6387xb_init(void)
+{
+	return platform_driver_register(&tc6387xb_platform_driver);
+}
+
+static void __exit tc6387xb_exit(void)
+{
+	platform_driver_unregister(&tc6387xb_platform_driver);
+}
+
+module_init(tc6387xb_init);
+module_exit(tc6387xb_exit);
+
+MODULE_DESCRIPTION("Toshiba TC6387XB core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton");
+MODULE_ALIAS("platform:tc6387xb");
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index f4fd797c159..e4c1c788b5f 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -19,8 +19,8 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/fb.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/tmio.h>
 #include <linux/mfd/tc6393xb.h>
@@ -112,6 +112,7 @@ struct tc6393xb {
 
 enum {
 	TC6393XB_CELL_NAND,
+	TC6393XB_CELL_MMC,
 };
 
 /*--------------------------------------------------------------------------*/
@@ -126,7 +127,7 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
 
 	/* SMD buffer on */
 	dev_dbg(&dev->dev, "SMD buffer on\n");
-	iowrite8(0xff, tc6393xb->scr + SCR_GPI_BCR(1));
+	tmio_iowrite8(0xff, tc6393xb->scr + SCR_GPI_BCR(1));
 
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 
@@ -135,25 +136,40 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
 
 static struct resource __devinitdata tc6393xb_nand_resources[] = {
 	{
-		.name	= TMIO_NAND_CONFIG,
-		.start	= 0x0100,
-		.end	= 0x01ff,
+		.start	= 0x1000,
+		.end	= 0x1007,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= TMIO_NAND_CONTROL,
-		.start	= 0x1000,
-		.end	= 0x1007,
+		.start	= 0x0100,
+		.end	= 0x01ff,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= TMIO_NAND_IRQ,
 		.start	= IRQ_TC6393_NAND,
 		.end	= IRQ_TC6393_NAND,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
+static struct resource __devinitdata tc6393xb_mmc_resources[] = {
+	{
+		.start	= 0x800,
+		.end	= 0x9ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x200,
+		.end	= 0x2ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TC6393_MMC,
+		.end	= IRQ_TC6393_MMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct mfd_cell __devinitdata tc6393xb_cells[] = {
 	[TC6393XB_CELL_NAND] = {
 		.name = "tmio-nand",
@@ -161,6 +177,11 @@ static struct mfd_cell __devinitdata tc6393xb_cells[] = {
 		.num_resources = ARRAY_SIZE(tc6393xb_nand_resources),
 		.resources = tc6393xb_nand_resources,
 	},
+	[TC6393XB_CELL_MMC] = {
+		.name = "tmio-mmc",
+		.num_resources = ARRAY_SIZE(tc6393xb_mmc_resources),
+		.resources = tc6393xb_mmc_resources,
+	},
 };
 
 /*--------------------------------------------------------------------------*/
@@ -171,7 +192,7 @@ static int tc6393xb_gpio_get(struct gpio_chip *chip,
 	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
 
 	/* XXX: does dsr also represent inputs? */
-	return ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8))
+	return tmio_ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8))
 		& TC_GPIO_BIT(offset);
 }
 
@@ -181,13 +202,13 @@ static void __tc6393xb_gpio_set(struct gpio_chip *chip,
 	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
 	u8  dsr;
 
-	dsr = ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8));
+	dsr = tmio_ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8));
 	if (value)
 		dsr |= TC_GPIO_BIT(offset);
 	else
 		dsr &= ~TC_GPIO_BIT(offset);
 
-	iowrite8(dsr, tc6393xb->scr + SCR_GPO_DSR(offset / 8));
+	tmio_iowrite8(dsr, tc6393xb->scr + SCR_GPO_DSR(offset / 8));
 }
 
 static void tc6393xb_gpio_set(struct gpio_chip *chip,
@@ -212,9 +233,9 @@ static int tc6393xb_gpio_direction_input(struct gpio_chip *chip,
 
 	spin_lock_irqsave(&tc6393xb->lock, flags);
 
-	doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	doecr = tmio_ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
 	doecr &= ~TC_GPIO_BIT(offset);
-	iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	tmio_iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
 
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 
@@ -232,9 +253,9 @@ static int tc6393xb_gpio_direction_output(struct gpio_chip *chip,
 
 	__tc6393xb_gpio_set(chip, offset, value);
 
-	doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	doecr = tmio_ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
 	doecr |= TC_GPIO_BIT(offset);
-	iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
+	tmio_iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8));
 
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 
@@ -265,8 +286,8 @@ tc6393xb_irq(unsigned int irq, struct irq_desc *desc)
 
 	irq_base = tc6393xb->irq_base;
 
-	while ((isr = ioread8(tc6393xb->scr + SCR_ISR) &
-				~ioread8(tc6393xb->scr + SCR_IMR)))
+	while ((isr = tmio_ioread8(tc6393xb->scr + SCR_ISR) &
+				~tmio_ioread8(tc6393xb->scr + SCR_IMR)))
 		for (i = 0; i < TC6393XB_NR_IRQS; i++) {
 			if (isr & (1 << i))
 				generic_handle_irq(irq_base + i);
@@ -284,9 +305,9 @@ static void tc6393xb_irq_mask(unsigned int irq)
 	u8 imr;
 
 	spin_lock_irqsave(&tc6393xb->lock, flags);
-	imr = ioread8(tc6393xb->scr + SCR_IMR);
+	imr = tmio_ioread8(tc6393xb->scr + SCR_IMR);
 	imr |= 1 << (irq - tc6393xb->irq_base);
-	iowrite8(imr, tc6393xb->scr + SCR_IMR);
+	tmio_iowrite8(imr, tc6393xb->scr + SCR_IMR);
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 }
 
@@ -297,9 +318,9 @@ static void tc6393xb_irq_unmask(unsigned int irq)
 	u8 imr;
 
 	spin_lock_irqsave(&tc6393xb->lock, flags);
-	imr = ioread8(tc6393xb->scr + SCR_IMR);
+	imr = tmio_ioread8(tc6393xb->scr + SCR_IMR);
 	imr &= ~(1 << (irq - tc6393xb->irq_base));
-	iowrite8(imr, tc6393xb->scr + SCR_IMR);
+	tmio_iowrite8(imr, tc6393xb->scr + SCR_IMR);
 	spin_unlock_irqrestore(&tc6393xb->lock, flags);
 }
 
@@ -380,9 +401,8 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 {
 	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
 	struct tc6393xb *tc6393xb;
-	struct resource *iomem;
-	struct resource *rscr;
-	int retval, temp;
+	struct resource *iomem, *rscr;
+	int ret, temp;
 	int i;
 
 	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
@@ -391,20 +411,26 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 
 	tc6393xb = kzalloc(sizeof *tc6393xb, GFP_KERNEL);
 	if (!tc6393xb) {
-		retval = -ENOMEM;
+		ret = -ENOMEM;
 		goto err_kzalloc;
 	}
 
 	spin_lock_init(&tc6393xb->lock);
 
 	platform_set_drvdata(dev, tc6393xb);
+
+	ret = platform_get_irq(dev, 0);
+	if (ret >= 0)
+		tc6393xb->irq = ret;
+	else
+		goto err_noirq;
+
 	tc6393xb->iomem = iomem;
-	tc6393xb->irq = platform_get_irq(dev, 0);
 	tc6393xb->irq_base = tcpd->irq_base;
 
-	tc6393xb->clk = clk_get(&dev->dev, "GPIO27_CLK" /* "CK3P6MI" */);
+	tc6393xb->clk = clk_get(&dev->dev, "CLK_CK3P6MI");
 	if (IS_ERR(tc6393xb->clk)) {
-		retval = PTR_ERR(tc6393xb->clk);
+		ret = PTR_ERR(tc6393xb->clk);
 		goto err_clk_get;
 	}
 
@@ -414,71 +440,73 @@ static int __devinit tc6393xb_probe(struct platform_device *dev)
 	rscr->end = iomem->start + 0xff;
 	rscr->flags = IORESOURCE_MEM;
 
-	retval = request_resource(iomem, rscr);
-	if (retval)
+	ret = request_resource(iomem, rscr);
+	if (ret)
 		goto err_request_scr;
 
 	tc6393xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1);
 	if (!tc6393xb->scr) {
-		retval = -ENOMEM;
+		ret = -ENOMEM;
 		goto err_ioremap;
 	}
 
-	retval = clk_enable(tc6393xb->clk);
-	if (retval)
+	ret = clk_enable(tc6393xb->clk);
+	if (ret)
 		goto err_clk_enable;
 
-	retval = tcpd->enable(dev);
-	if (retval)
+	ret = tcpd->enable(dev);
+	if (ret)
 		goto err_enable;
 
 	tc6393xb->suspend_state.fer = 0;
+
 	for (i = 0; i < 3; i++) {
 		tc6393xb->suspend_state.gpo_dsr[i] =
 			(tcpd->scr_gpo_dsr >> (8 * i)) & 0xff;
 		tc6393xb->suspend_state.gpo_doecr[i] =
 			(tcpd->scr_gpo_doecr >> (8 * i)) & 0xff;
 	}
-	/*
-	 * It may be necessary to change this back to
-	 * platform-dependant code
-	 */
+
 	tc6393xb->suspend_state.ccr = SCR_CCR_UNK1 |
 					SCR_CCR_HCLK_48;
 
-	retval = tc6393xb_hw_init(dev);
-	if (retval)
+	ret = tc6393xb_hw_init(dev);
+	if (ret)
 		goto err_hw_init;
 
 	printk(KERN_INFO "Toshiba tc6393xb revision %d at 0x%08lx, irq %d\n",
-			ioread8(tc6393xb->scr + SCR_REVID),
+			tmio_ioread8(tc6393xb->scr + SCR_REVID),
 			(unsigned long) iomem->start, tc6393xb->irq);
 
 	tc6393xb->gpio.base = -1;
 
 	if (tcpd->gpio_base >= 0) {
-		retval = tc6393xb_register_gpio(tc6393xb, tcpd->gpio_base);
-		if (retval)
+		ret = tc6393xb_register_gpio(tc6393xb, tcpd->gpio_base);
+		if (ret)
 			goto err_gpio_add;
 	}
 
-	if (tc6393xb->irq)
-		tc6393xb_attach_irq(dev);
+	tc6393xb_attach_irq(dev);
 
 	tc6393xb_cells[TC6393XB_CELL_NAND].driver_data = tcpd->nand_data;
 	tc6393xb_cells[TC6393XB_CELL_NAND].platform_data =
 		&tc6393xb_cells[TC6393XB_CELL_NAND];
 	tc6393xb_cells[TC6393XB_CELL_NAND].data_size =
 		sizeof(tc6393xb_cells[TC6393XB_CELL_NAND]);
+	tc6393xb_cells[TC6393XB_CELL_MMC].platform_data =
+		&tc6393xb_cells[TC6393XB_CELL_MMC];
+	tc6393xb_cells[TC6393XB_CELL_MMC].data_size =
+		sizeof(tc6393xb_cells[TC6393XB_CELL_MMC]);
+
 
-	retval = mfd_add_devices(&dev->dev, dev->id,
+	ret = mfd_add_devices(&dev->dev, dev->id,
 			tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells),
 			iomem, tcpd->irq_base);
 
-	return 0;
+	if (!ret)
+		return 0;
 
-	if (tc6393xb->irq)
-		tc6393xb_detach_irq(dev);
+	tc6393xb_detach_irq(dev);
 
 err_gpio_add:
 	if (tc6393xb->gpio.base != -1)
@@ -493,10 +521,11 @@ err_ioremap:
 	release_resource(&tc6393xb->rscr);
 err_request_scr:
 	clk_put(tc6393xb->clk);
+err_noirq:
 err_clk_get:
 	kfree(tc6393xb);
 err_kzalloc:
-	return retval;
+	return ret;
 }
 
 static int __devexit tc6393xb_remove(struct platform_device *dev)
@@ -506,9 +535,7 @@ static int __devexit tc6393xb_remove(struct platform_device *dev)
 	int ret;
 
 	mfd_remove_devices(&dev->dev);
-
-	if (tc6393xb->irq)
-		tc6393xb_detach_irq(dev);
+	tc6393xb_detach_irq(dev);
 
 	if (tc6393xb->gpio.base != -1) {
 		ret = gpiochip_remove(&tc6393xb->gpio);
@@ -519,17 +546,11 @@ static int __devexit tc6393xb_remove(struct platform_device *dev)
 	}
 
 	ret = tcpd->disable(dev);
-
 	clk_disable(tc6393xb->clk);
-
 	iounmap(tc6393xb->scr);
-
 	release_resource(&tc6393xb->rscr);
-
 	platform_set_drvdata(dev, NULL);
-
 	clk_put(tc6393xb->clk);
-
 	kfree(tc6393xb);
 
 	return ret;
@@ -540,8 +561,7 @@ static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state)
 {
 	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
 	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
-	int i;
-
+	int i, ret;
 
 	tc6393xb->suspend_state.ccr = ioread16(tc6393xb->scr + SCR_CCR);
 	tc6393xb->suspend_state.fer = ioread8(tc6393xb->scr + SCR_FER);
@@ -554,14 +574,21 @@ static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state)
 		tc6393xb->suspend_state.gpi_bcr[i] =
 			ioread8(tc6393xb->scr + SCR_GPI_BCR(i));
 	}
+	ret = tcpd->suspend(dev);
+	clk_disable(tc6393xb->clk);
 
-	return tcpd->suspend(dev);
+	return ret;
 }
 
 static int tc6393xb_resume(struct platform_device *dev)
 {
 	struct tc6393xb_platform_data *tcpd = dev->dev.platform_data;
-	int ret = tcpd->resume(dev);
+	struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+	int ret;
+
+	clk_enable(tc6393xb->clk);
+
+	ret = tcpd->resume(dev);
 
 	if (ret)
 		return ret;
@@ -598,7 +625,7 @@ static void __exit tc6393xb_exit(void)
 subsys_initcall(tc6393xb_init);
 module_exit(tc6393xb_exit);
 
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer");
 MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller");
 MODULE_ALIAS("platform:tc6393xb");
diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index e7a3fe508df..b2d9878dc3f 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -803,11 +803,30 @@ static acpi_status get_u32(u32 *value, u32 cap)
 
 static acpi_status set_u32(u32 value, u32 cap)
 {
+	acpi_status status;
+
 	if (interface->capability & cap) {
 		switch (interface->type) {
 		case ACER_AMW0:
 			return AMW0_set_u32(value, cap, interface);
 		case ACER_AMW0_V2:
+			if (cap == ACER_CAP_MAILLED)
+				return AMW0_set_u32(value, cap, interface);
+
+			/*
+			 * On some models, some WMID methods don't toggle
+			 * properly. For those cases, we want to run the AMW0
+			 * method afterwards to be certain we've really toggled
+			 * the device state.
+			 */
+			if (cap == ACER_CAP_WIRELESS ||
+				cap == ACER_CAP_BLUETOOTH) {
+				status = WMID_set_u32(value, cap, interface);
+				if (ACPI_FAILURE(status))
+					return status;
+
+				return AMW0_set_u32(value, cap, interface);
+			}
 		case ACER_WMID:
 			return WMID_set_u32(value, cap, interface);
 		default:
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index 4251018f70f..a78f70deeb5 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -279,7 +279,7 @@ struct gru_stats_s {
 #if defined CONFIG_IA64
 #define VADDR_HI_BIT		64
 #define GRUREGION(addr)		((addr) >> (VADDR_HI_BIT - 3) & 3)
-#elif defined __x86_64
+#elif defined CONFIG_X86_64
 #define VADDR_HI_BIT		48
 #define GRUREGION(addr)		(0)		/* ZZZ could do better */
 #else
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index dc6f2579f85..ea8d7a3490d 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -174,3 +174,9 @@ config MMC_SDRICOH_CS
 	  To compile this driver as a module, choose M here: the
 	  module will be called sdricoh_cs.
 
+config MMC_TMIO
+	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
+	depends on MFD_TMIO
+	help
+	  This provides support for the SD/MMC cell found in TC6393XB,
+	  T7L66XB and also ipaq ASIC3
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index db52eebfb50..c794cc5ce44 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -21,4 +21,5 @@ obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
 obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
 obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
+obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
 
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 7c994e1ae27..ae16d845d74 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -595,8 +595,9 @@ static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id,
-			      int size, enum s3c2410_dma_buffresult result)
+static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch,
+				     void *buf_id, int size,
+				     enum s3c2410_dma_buffresult result)
 {
 	struct s3cmci_host *host = buf_id;
 	unsigned long iflags;
@@ -740,8 +741,8 @@ request_done:
 	mmc_request_done(host->mmc, mrq);
 }
 
-
-void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source)
+static void s3cmci_dma_setup(struct s3cmci_host *host,
+			     enum s3c2410_dmasrc source)
 {
 	static enum s3c2410_dmasrc last_source = -1;
 	static int setup_ok;
@@ -1003,8 +1004,9 @@ static void s3cmci_send_request(struct mmc_host *mmc)
 	enable_irq(host->irq);
 }
 
-static int s3cmci_card_present(struct s3cmci_host *host)
+static int s3cmci_card_present(struct mmc_host *mmc)
 {
+	struct s3cmci_host *host = mmc_priv(mmc);
 	struct s3c24xx_mci_pdata *pdata = host->pdata;
 	int ret;
 
@@ -1023,7 +1025,7 @@ static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	host->cmd_is_stop = 0;
 	host->mrq = mrq;
 
-	if (s3cmci_card_present(host) == 0) {
+	if (s3cmci_card_present(mmc) == 0) {
 		dbg(host, dbg_err, "%s: no medium present\n", __func__);
 		host->mrq->cmd->error = -ENOMEDIUM;
 		mmc_request_done(mmc, mrq);
@@ -1138,6 +1140,7 @@ static struct mmc_host_ops s3cmci_ops = {
 	.request	= s3cmci_request,
 	.set_ios	= s3cmci_set_ios,
 	.get_ro		= s3cmci_get_ro,
+	.get_cd		= s3cmci_card_present,
 };
 
 static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
@@ -1206,7 +1209,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
 	}
 
 	host->base = ioremap(host->mem->start, RESSIZE(host->mem));
-	if (host->base == 0) {
+	if (!host->base) {
 		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
 		ret = -EINVAL;
 		goto probe_free_mem_region;
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
index f99e9f72162..1df44d966bd 100644
--- a/drivers/mmc/host/sdricoh_cs.c
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -29,7 +29,6 @@
 #include <linux/pci.h>
 #include <linux/ioport.h>
 #include <linux/scatterlist.h>
-#include <linux/version.h>
 
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
new file mode 100644
index 00000000000..95430b81ec1
--- /dev/null
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -0,0 +1,691 @@
+/*
+ *  linux/drivers/mmc/tmio_mmc.c
+ *
+ *  Copyright (C) 2004 Ian Molton
+ *  Copyright (C) 2007 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the MMC / SD / SDIO cell found in:
+ *
+ * TC6393XB TC6391XB TC6387XB T7L66XB
+ *
+ * This driver draws mainly on scattered spec sheets, Reverse engineering
+ * of the toshiba e800  SD driver and some parts of the 2.4 ASIC3 driver (4 bit
+ * support). (Further 4 bit support from a later datasheet).
+ *
+ * TODO:
+ *   Investigate using a workqueue for PIO transfers
+ *   Eliminate FIXMEs
+ *   SDIO support
+ *   Better Power management
+ *   Handle MMC errors better
+ *   double buffer support
+ *
+ */
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+
+#include "tmio_mmc.h"
+
+/*
+ * Fixme - documentation conflicts on what the clock values are for the
+ * various dividers.
+ * One document I have says that its a divisor of a 24MHz clock, another 33.
+ * This probably depends on HCLK for a given platform, so we may need to
+ * require HCLK be passed to us from the MFD core.
+ *
+ */
+
+static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
+{
+	void __iomem *cnf = host->cnf;
+	void __iomem *ctl = host->ctl;
+	u32 clk = 0, clock;
+
+	if (new_clock) {
+		for (clock = 46875, clk = 0x100; new_clock >= (clock<<1); ) {
+			clock <<= 1;
+			clk >>= 1;
+		}
+		if (clk & 0x1)
+			clk = 0x20000;
+
+		clk >>= 2;
+		tmio_iowrite8((clk & 0x8000) ? 0 : 1, cnf + CNF_SD_CLK_MODE);
+		clk |= 0x100;
+	}
+
+	tmio_iowrite16(clk, ctl + CTL_SD_CARD_CLK_CTL);
+}
+
+static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+
+	tmio_iowrite16(0x0000, ctl + CTL_CLK_AND_WAIT_CTL);
+	msleep(10);
+	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) & ~0x0100,
+	       ctl + CTL_SD_CARD_CLK_CTL);
+	msleep(10);
+}
+
+static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+
+	tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) | 0x0100,
+	       ctl + CTL_SD_CARD_CLK_CTL);
+	msleep(10);
+	tmio_iowrite16(0x0100, ctl + CTL_CLK_AND_WAIT_CTL);
+	msleep(10);
+}
+
+static void reset(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+
+	/* FIXME - should we set stop clock reg here */
+	tmio_iowrite16(0x0000, ctl + CTL_RESET_SD);
+	tmio_iowrite16(0x0000, ctl + CTL_RESET_SDIO);
+	msleep(10);
+	tmio_iowrite16(0x0001, ctl + CTL_RESET_SD);
+	tmio_iowrite16(0x0001, ctl + CTL_RESET_SDIO);
+	msleep(10);
+}
+
+static void
+tmio_mmc_finish_request(struct tmio_mmc_host *host)
+{
+	struct mmc_request *mrq = host->mrq;
+
+	host->mrq = NULL;
+	host->cmd = NULL;
+	host->data = NULL;
+
+	mmc_request_done(host->mmc, mrq);
+}
+
+/* These are the bitmasks the tmio chip requires to implement the MMC response
+ * types. Note that R1 and R6 are the same in this scheme. */
+#define APP_CMD        0x0040
+#define RESP_NONE      0x0300
+#define RESP_R1        0x0400
+#define RESP_R1B       0x0500
+#define RESP_R2        0x0600
+#define RESP_R3        0x0700
+#define DATA_PRESENT   0x0800
+#define TRANSFER_READ  0x1000
+#define TRANSFER_MULTI 0x2000
+#define SECURITY_CMD   0x4000
+
+static int
+tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
+{
+	void __iomem *ctl = host->ctl;
+	struct mmc_data *data = host->data;
+	int c = cmd->opcode;
+
+	/* Command 12 is handled by hardware */
+	if (cmd->opcode == 12 && !cmd->arg) {
+		tmio_iowrite16(0x001, ctl + CTL_STOP_INTERNAL_ACTION);
+		return 0;
+	}
+
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE: c |= RESP_NONE; break;
+	case MMC_RSP_R1:   c |= RESP_R1;   break;
+	case MMC_RSP_R1B:  c |= RESP_R1B;  break;
+	case MMC_RSP_R2:   c |= RESP_R2;   break;
+	case MMC_RSP_R3:   c |= RESP_R3;   break;
+	default:
+		pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
+		return -EINVAL;
+	}
+
+	host->cmd = cmd;
+
+/* FIXME - this seems to be ok comented out but the spec suggest this bit should
+ *         be set when issuing app commands.
+ *	if(cmd->flags & MMC_FLAG_ACMD)
+ *		c |= APP_CMD;
+ */
+	if (data) {
+		c |= DATA_PRESENT;
+		if (data->blocks > 1) {
+			tmio_iowrite16(0x100, ctl + CTL_STOP_INTERNAL_ACTION);
+			c |= TRANSFER_MULTI;
+		}
+		if (data->flags & MMC_DATA_READ)
+			c |= TRANSFER_READ;
+	}
+
+	enable_mmc_irqs(ctl, TMIO_MASK_CMD);
+
+	/* Fire off the command */
+	tmio_iowrite32(cmd->arg, ctl + CTL_ARG_REG);
+	tmio_iowrite16(c, ctl + CTL_SD_CMD);
+
+	return 0;
+}
+
+/* This chip always returns (at least?) as much data as you ask for.
+ * I'm unsure what happens if you ask for less than a block. This should be
+ * looked into to ensure that a funny length read doesnt hose the controller.
+ *
+ */
+static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+	struct mmc_data *data = host->data;
+	unsigned short *buf;
+	unsigned int count;
+	unsigned long flags;
+
+	if (!data) {
+		pr_debug("Spurious PIO IRQ\n");
+		return;
+	}
+
+	buf = (unsigned short *)(tmio_mmc_kmap_atomic(host, &flags) +
+	      host->sg_off);
+
+	count = host->sg_ptr->length - host->sg_off;
+	if (count > data->blksz)
+		count = data->blksz;
+
+	pr_debug("count: %08x offset: %08x flags %08x\n",
+	    count, host->sg_off, data->flags);
+
+	/* Transfer the data */
+	if (data->flags & MMC_DATA_READ)
+		tmio_ioread16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+	else
+		tmio_iowrite16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+
+	host->sg_off += count;
+
+	tmio_mmc_kunmap_atomic(host, &flags);
+
+	if (host->sg_off == host->sg_ptr->length)
+		tmio_mmc_next_sg(host);
+
+	return;
+}
+
+static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
+{
+	void __iomem *ctl = host->ctl;
+	struct mmc_data *data = host->data;
+	struct mmc_command *stop = data->stop;
+
+	host->data = NULL;
+
+	if (!data) {
+		pr_debug("Spurious data end IRQ\n");
+		return;
+	}
+
+	/* FIXME - return correct transfer count on errors */
+	if (!data->error)
+		data->bytes_xfered = data->blocks * data->blksz;
+	else
+		data->bytes_xfered = 0;
+
+	pr_debug("Completed data request\n");
+
+	/*FIXME - other drivers allow an optional stop command of any given type
+	 *        which we dont do, as the chip can auto generate them.
+	 *        Perhaps we can be smarter about when to use auto CMD12 and
+	 *        only issue the auto request when we know this is the desired
+	 *        stop command, allowing fallback to the stop command the
+	 *        upper layers expect. For now, we do what works.
+	 */
+
+	if (data->flags & MMC_DATA_READ)
+		disable_mmc_irqs(ctl, TMIO_MASK_READOP);
+	else
+		disable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+
+	if (stop) {
+		if (stop->opcode == 12 && !stop->arg)
+			tmio_iowrite16(0x000, ctl + CTL_STOP_INTERNAL_ACTION);
+		else
+			BUG();
+	}
+
+	tmio_mmc_finish_request(host);
+}
+
+static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
+	unsigned int stat)
+{
+	void __iomem *ctl = host->ctl, *addr;
+	struct mmc_command *cmd = host->cmd;
+	int i;
+
+	if (!host->cmd) {
+		pr_debug("Spurious CMD irq\n");
+		return;
+	}
+
+	host->cmd = NULL;
+
+	/* This controller is sicker than the PXA one. Not only do we need to
+	 * drop the top 8 bits of the first response word, we also need to
+	 * modify the order of the response for short response command types.
+	 */
+
+	for (i = 3, addr = ctl + CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
+		cmd->resp[i] = tmio_ioread32(addr);
+
+	if (cmd->flags &  MMC_RSP_136) {
+		cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
+		cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
+		cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
+		cmd->resp[3] <<= 8;
+	} else if (cmd->flags & MMC_RSP_R3) {
+		cmd->resp[0] = cmd->resp[3];
+	}
+
+	if (stat & TMIO_STAT_CMDTIMEOUT)
+		cmd->error = -ETIMEDOUT;
+	else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
+		cmd->error = -EILSEQ;
+
+	/* If there is data to handle we enable data IRQs here, and
+	 * we will ultimatley finish the request in the data_end handler.
+	 * If theres no data or we encountered an error, finish now.
+	 */
+	if (host->data && !cmd->error) {
+		if (host->data->flags & MMC_DATA_READ)
+			enable_mmc_irqs(ctl, TMIO_MASK_READOP);
+		else
+			enable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+	} else {
+		tmio_mmc_finish_request(host);
+	}
+
+	return;
+}
+
+
+static irqreturn_t tmio_mmc_irq(int irq, void *devid)
+{
+	struct tmio_mmc_host *host = devid;
+	void __iomem *ctl = host->ctl;
+	unsigned int ireg, irq_mask, status;
+
+	pr_debug("MMC IRQ begin\n");
+
+	status = tmio_ioread32(ctl + CTL_STATUS);
+	irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+	ireg = status & TMIO_MASK_IRQ & ~irq_mask;
+
+	pr_debug_status(status);
+	pr_debug_status(ireg);
+
+	if (!ireg) {
+		disable_mmc_irqs(ctl, status & ~irq_mask);
+
+		pr_debug("tmio_mmc: Spurious irq, disabling! "
+			"0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
+		pr_debug_status(status);
+
+		goto out;
+	}
+
+	while (ireg) {
+		/* Card insert / remove attempts */
+		if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
+			ack_mmc_irqs(ctl, TMIO_STAT_CARD_INSERT |
+				TMIO_STAT_CARD_REMOVE);
+			mmc_detect_change(host->mmc, 0);
+		}
+
+		/* CRC and other errors */
+/*		if (ireg & TMIO_STAT_ERR_IRQ)
+ *			handled |= tmio_error_irq(host, irq, stat);
+ */
+
+		/* Command completion */
+		if (ireg & TMIO_MASK_CMD) {
+			ack_mmc_irqs(ctl, TMIO_MASK_CMD);
+			tmio_mmc_cmd_irq(host, status);
+		}
+
+		/* Data transfer */
+		if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
+			ack_mmc_irqs(ctl, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
+			tmio_mmc_pio_irq(host);
+		}
+
+		/* Data transfer completion */
+		if (ireg & TMIO_STAT_DATAEND) {
+			ack_mmc_irqs(ctl, TMIO_STAT_DATAEND);
+			tmio_mmc_data_irq(host);
+		}
+
+		/* Check status - keep going until we've handled it all */
+		status = tmio_ioread32(ctl + CTL_STATUS);
+		irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+		ireg = status & TMIO_MASK_IRQ & ~irq_mask;
+
+		pr_debug("Status at end of loop: %08x\n", status);
+		pr_debug_status(status);
+	}
+	pr_debug("MMC IRQ end\n");
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int tmio_mmc_start_data(struct tmio_mmc_host *host,
+	struct mmc_data *data)
+{
+	void __iomem *ctl = host->ctl;
+
+	pr_debug("setup data transfer: blocksize %08x  nr_blocks %d\n",
+	    data->blksz, data->blocks);
+
+	/* Hardware cannot perform 1 and 2 byte requests in 4 bit mode */
+	if (data->blksz < 4 && host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
+		printk(KERN_ERR "%s: %d byte block unsupported in 4 bit mode\n",
+			mmc_hostname(host->mmc), data->blksz);
+		return -EINVAL;
+	}
+
+	tmio_mmc_init_sg(host, data);
+	host->data = data;
+
+	/* Set transfer length / blocksize */
+	tmio_iowrite16(data->blksz,  ctl + CTL_SD_XFER_LEN);
+	tmio_iowrite16(data->blocks, ctl + CTL_XFER_BLK_COUNT);
+
+	return 0;
+}
+
+/* Process requests from the MMC layer */
+static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	int ret;
+
+	if (host->mrq)
+		pr_debug("request not null\n");
+
+	host->mrq = mrq;
+
+	if (mrq->data) {
+		ret = tmio_mmc_start_data(host, mrq->data);
+		if (ret)
+			goto fail;
+	}
+
+	ret = tmio_mmc_start_command(host, mrq->cmd);
+
+	if (!ret)
+		return;
+
+fail:
+	mrq->cmd->error = ret;
+	mmc_request_done(mmc, mrq);
+}
+
+/* Set MMC clock / power.
+ * Note: This controller uses a simple divider scheme therefore it cannot
+ * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
+ * MMC wont run that fast, it has to be clocked at 12MHz which is the next
+ * slowest setting.
+ */
+static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	void __iomem *cnf = host->cnf;
+	void __iomem *ctl = host->ctl;
+
+	if (ios->clock)
+		tmio_mmc_set_clock(host, ios->clock);
+
+	/* Power sequence - OFF -> ON -> UP */
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF: /* power down SD bus */
+		tmio_iowrite8(0x00, cnf + CNF_PWR_CTL_2);
+		tmio_mmc_clk_stop(host);
+		break;
+	case MMC_POWER_ON: /* power up SD bus */
+
+		tmio_iowrite8(0x02, cnf + CNF_PWR_CTL_2);
+		break;
+	case MMC_POWER_UP: /* start bus clock */
+		tmio_mmc_clk_start(host);
+		break;
+	}
+
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_1:
+		tmio_iowrite16(0x80e0, ctl + CTL_SD_MEM_CARD_OPT);
+	break;
+	case MMC_BUS_WIDTH_4:
+		tmio_iowrite16(0x00e0, ctl + CTL_SD_MEM_CARD_OPT);
+	break;
+	}
+
+	/* Let things settle. delay taken from winCE driver */
+	udelay(140);
+}
+
+static int tmio_mmc_get_ro(struct mmc_host *mmc)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	void __iomem *ctl = host->ctl;
+
+	return (tmio_ioread16(ctl + CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
+}
+
+static struct mmc_host_ops tmio_mmc_ops = {
+	.request	= tmio_mmc_request,
+	.set_ios	= tmio_mmc_set_ios,
+	.get_ro         = tmio_mmc_get_ro,
+};
+
+#ifdef CONFIG_PM
+static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+	int ret;
+
+	ret = mmc_suspend_host(mmc, state);
+
+	/* Tell MFD core it can disable us now.*/
+	if (!ret && cell->disable)
+		cell->disable(dev);
+
+	return ret;
+}
+
+static int tmio_mmc_resume(struct platform_device *dev)
+{
+	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+	void __iomem *cnf = host->cnf;
+	int ret = 0;
+
+	/* Enable the MMC/SD Control registers */
+	tmio_iowrite16(SDCREN, cnf + CNF_CMD);
+	tmio_iowrite32(dev->resource[0].start & 0xfffe, cnf + CNF_CTL_BASE);
+
+	/* Tell the MFD core we are ready to be enabled */
+	if (cell->enable) {
+		ret = cell->enable(dev);
+		if (ret)
+			goto out;
+	}
+
+	mmc_resume_host(mmc);
+
+out:
+	return ret;
+}
+#else
+#define tmio_mmc_suspend NULL
+#define tmio_mmc_resume NULL
+#endif
+
+static int __devinit tmio_mmc_probe(struct platform_device *dev)
+{
+	struct mfd_cell	*cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct resource *res_ctl, *res_cnf;
+	struct tmio_mmc_host *host;
+	struct mmc_host *mmc;
+	int ret = -ENOMEM;
+
+	if (dev->num_resources != 3)
+		goto out;
+
+	res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	if (!res_ctl || !res_cnf) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev);
+	if (!mmc)
+		goto out;
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	platform_set_drvdata(dev, mmc);
+
+	host->ctl = ioremap(res_ctl->start, res_ctl->end - res_ctl->start);
+	if (!host->ctl)
+		goto host_free;
+
+	host->cnf = ioremap(res_cnf->start, res_cnf->end - res_cnf->start);
+	if (!host->cnf)
+		goto unmap_ctl;
+
+	mmc->ops = &tmio_mmc_ops;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+	mmc->f_min = 46875; /* 24000000 / 512 */
+	mmc->f_max = 24000000;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	/* Enable the MMC/SD Control registers */
+	tmio_iowrite16(SDCREN, host->cnf + CNF_CMD);
+	tmio_iowrite32(dev->resource[0].start & 0xfffe,
+		host->cnf + CNF_CTL_BASE);
+
+	/* Tell the MFD core we are ready to be enabled */
+	if (cell->enable) {
+		ret = cell->enable(dev);
+		if (ret)
+			goto unmap_cnf;
+	}
+
+	/* Disable SD power during suspend */
+	tmio_iowrite8(0x01, host->cnf + CNF_PWR_CTL_3);
+
+	/* The below is required but why? FIXME */
+	tmio_iowrite8(0x1f, host->cnf + CNF_STOP_CLK_CTL);
+
+	/* Power down SD bus*/
+	tmio_iowrite8(0x0,  host->cnf + CNF_PWR_CTL_2);
+
+	tmio_mmc_clk_stop(host);
+	reset(host);
+
+	ret = platform_get_irq(dev, 0);
+	if (ret >= 0)
+		host->irq = ret;
+	else
+		goto unmap_cnf;
+
+	disable_mmc_irqs(host->ctl, TMIO_MASK_ALL);
+
+	ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED, "tmio-mmc",
+		host);
+	if (ret)
+		goto unmap_cnf;
+
+	set_irq_type(host->irq, IRQ_TYPE_EDGE_FALLING);
+
+	mmc_add_host(mmc);
+
+	printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
+	       (unsigned long)host->ctl, host->irq);
+
+	/* Unmask the IRQs we want to know about */
+	enable_mmc_irqs(host->ctl,  TMIO_MASK_IRQ);
+
+	return 0;
+
+unmap_cnf:
+	iounmap(host->cnf);
+unmap_ctl:
+	iounmap(host->ctl);
+host_free:
+	mmc_free_host(mmc);
+out:
+	return ret;
+}
+
+static int __devexit tmio_mmc_remove(struct platform_device *dev)
+{
+	struct mmc_host *mmc = platform_get_drvdata(dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	if (mmc) {
+		struct tmio_mmc_host *host = mmc_priv(mmc);
+		mmc_remove_host(mmc);
+		mmc_free_host(mmc);
+		free_irq(host->irq, host);
+		iounmap(host->ctl);
+		iounmap(host->cnf);
+	}
+
+	return 0;
+}
+
+/* ------------------- device registration ----------------------- */
+
+static struct platform_driver tmio_mmc_driver = {
+	.driver = {
+		.name = "tmio-mmc",
+		.owner = THIS_MODULE,
+	},
+	.probe = tmio_mmc_probe,
+	.remove = __devexit_p(tmio_mmc_remove),
+	.suspend = tmio_mmc_suspend,
+	.resume = tmio_mmc_resume,
+};
+
+
+static int __init tmio_mmc_init(void)
+{
+	return platform_driver_register(&tmio_mmc_driver);
+}
+
+static void __exit tmio_mmc_exit(void)
+{
+	platform_driver_unregister(&tmio_mmc_driver);
+}
+
+module_init(tmio_mmc_init);
+module_exit(tmio_mmc_exit);
+
+MODULE_DESCRIPTION("Toshiba TMIO SD/MMC driver");
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tmio-mmc");
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
new file mode 100644
index 00000000000..9e647a06054
--- /dev/null
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -0,0 +1,194 @@
+/* Definitons for use with the tmio_mmc.c
+ *
+ * (c) 2004 Ian Molton <spyro@f2s.com>
+ * (c) 2007 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#define CNF_CMD     0x04
+#define CNF_CTL_BASE   0x10
+#define CNF_INT_PIN  0x3d
+#define CNF_STOP_CLK_CTL 0x40
+#define CNF_GCLK_CTL 0x41
+#define CNF_SD_CLK_MODE 0x42
+#define CNF_PIN_STATUS 0x44
+#define CNF_PWR_CTL_1 0x48
+#define CNF_PWR_CTL_2 0x49
+#define CNF_PWR_CTL_3 0x4a
+#define CNF_CARD_DETECT_MODE 0x4c
+#define CNF_SD_SLOT 0x50
+#define CNF_EXT_GCLK_CTL_1 0xf0
+#define CNF_EXT_GCLK_CTL_2 0xf1
+#define CNF_EXT_GCLK_CTL_3 0xf9
+#define CNF_SD_LED_EN_1 0xfa
+#define CNF_SD_LED_EN_2 0xfe
+
+#define   SDCREN 0x2   /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
+
+#define CTL_SD_CMD 0x00
+#define CTL_ARG_REG 0x04
+#define CTL_STOP_INTERNAL_ACTION 0x08
+#define CTL_XFER_BLK_COUNT 0xa
+#define CTL_RESPONSE 0x0c
+#define CTL_STATUS 0x1c
+#define CTL_IRQ_MASK 0x20
+#define CTL_SD_CARD_CLK_CTL 0x24
+#define CTL_SD_XFER_LEN 0x26
+#define CTL_SD_MEM_CARD_OPT 0x28
+#define CTL_SD_ERROR_DETAIL_STATUS 0x2c
+#define CTL_SD_DATA_PORT 0x30
+#define CTL_TRANSACTION_CTL 0x34
+#define CTL_RESET_SD 0xe0
+#define CTL_SDIO_REGS 0x100
+#define CTL_CLK_AND_WAIT_CTL 0x138
+#define CTL_RESET_SDIO 0x1e0
+
+/* Definitions for values the CTRL_STATUS register can take. */
+#define TMIO_STAT_CMDRESPEND    0x00000001
+#define TMIO_STAT_DATAEND       0x00000004
+#define TMIO_STAT_CARD_REMOVE   0x00000008
+#define TMIO_STAT_CARD_INSERT   0x00000010
+#define TMIO_STAT_SIGSTATE      0x00000020
+#define TMIO_STAT_WRPROTECT     0x00000080
+#define TMIO_STAT_CARD_REMOVE_A 0x00000100
+#define TMIO_STAT_CARD_INSERT_A 0x00000200
+#define TMIO_STAT_SIGSTATE_A    0x00000400
+#define TMIO_STAT_CMD_IDX_ERR   0x00010000
+#define TMIO_STAT_CRCFAIL       0x00020000
+#define TMIO_STAT_STOPBIT_ERR   0x00040000
+#define TMIO_STAT_DATATIMEOUT   0x00080000
+#define TMIO_STAT_RXOVERFLOW    0x00100000
+#define TMIO_STAT_TXUNDERRUN    0x00200000
+#define TMIO_STAT_CMDTIMEOUT    0x00400000
+#define TMIO_STAT_RXRDY         0x01000000
+#define TMIO_STAT_TXRQ          0x02000000
+#define TMIO_STAT_ILL_FUNC      0x20000000
+#define TMIO_STAT_CMD_BUSY      0x40000000
+#define TMIO_STAT_ILL_ACCESS    0x80000000
+
+/* Define some IRQ masks */
+/* This is the mask used at reset by the chip */
+#define TMIO_MASK_ALL           0x837f031d
+#define TMIO_MASK_READOP  (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND | \
+		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
+#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND | \
+		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
+#define TMIO_MASK_CMD     (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \
+		TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
+#define TMIO_MASK_IRQ     (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
+
+#define enable_mmc_irqs(ctl, i) \
+	do { \
+		u32 mask;\
+		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask &= ~((i) & TMIO_MASK_IRQ); \
+		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+	} while (0)
+
+#define disable_mmc_irqs(ctl, i) \
+	do { \
+		u32 mask;\
+		mask  = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+		mask |= ((i) & TMIO_MASK_IRQ); \
+		tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+	} while (0)
+
+#define ack_mmc_irqs(ctl, i) \
+	do { \
+		u32 mask;\
+		mask  = tmio_ioread32((ctl) + CTL_STATUS); \
+		mask &= ~((i) & TMIO_MASK_IRQ); \
+		tmio_iowrite32(mask, (ctl) + CTL_STATUS); \
+	} while (0)
+
+
+struct tmio_mmc_host {
+	void __iomem *cnf;
+	void __iomem *ctl;
+	struct mmc_command      *cmd;
+	struct mmc_request      *mrq;
+	struct mmc_data         *data;
+	struct mmc_host         *mmc;
+	int                     irq;
+
+	/* pio related stuff */
+	struct scatterlist      *sg_ptr;
+	unsigned int            sg_len;
+	unsigned int            sg_off;
+};
+
+#include <linux/scatterlist.h>
+#include <linux/blkdev.h>
+
+static inline void tmio_mmc_init_sg(struct tmio_mmc_host *host,
+	struct mmc_data *data)
+{
+	host->sg_len = data->sg_len;
+	host->sg_ptr = data->sg;
+	host->sg_off = 0;
+}
+
+static inline int tmio_mmc_next_sg(struct tmio_mmc_host *host)
+{
+	host->sg_ptr = sg_next(host->sg_ptr);
+	host->sg_off = 0;
+	return --host->sg_len;
+}
+
+static inline char *tmio_mmc_kmap_atomic(struct tmio_mmc_host *host,
+	unsigned long *flags)
+{
+	struct scatterlist *sg = host->sg_ptr;
+
+	local_irq_save(*flags);
+	return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
+}
+
+static inline void tmio_mmc_kunmap_atomic(struct tmio_mmc_host *host,
+	unsigned long *flags)
+{
+	kunmap_atomic(sg_page(host->sg_ptr), KM_BIO_SRC_IRQ);
+	local_irq_restore(*flags);
+}
+
+#ifdef CONFIG_MMC_DEBUG
+
+#define STATUS_TO_TEXT(a) \
+	do { \
+		if (status & TMIO_STAT_##a) \
+			printf(#a); \
+	} while (0)
+
+void debug_status(u32 status)
+{
+	printk(KERN_DEBUG "status: %08x = ", status);
+	STATUS_TO_TEXT(CARD_REMOVE);
+	STATUS_TO_TEXT(CARD_INSERT);
+	STATUS_TO_TEXT(SIGSTATE);
+	STATUS_TO_TEXT(WRPROTECT);
+	STATUS_TO_TEXT(CARD_REMOVE_A);
+	STATUS_TO_TEXT(CARD_INSERT_A);
+	STATUS_TO_TEXT(SIGSTATE_A);
+	STATUS_TO_TEXT(CMD_IDX_ERR);
+	STATUS_TO_TEXT(STOPBIT_ERR);
+	STATUS_TO_TEXT(ILL_FUNC);
+	STATUS_TO_TEXT(CMD_BUSY);
+	STATUS_TO_TEXT(CMDRESPEND);
+	STATUS_TO_TEXT(DATAEND);
+	STATUS_TO_TEXT(CRCFAIL);
+	STATUS_TO_TEXT(DATATIMEOUT);
+	STATUS_TO_TEXT(CMDTIMEOUT);
+	STATUS_TO_TEXT(RXOVERFLOW);
+	STATUS_TO_TEXT(TXUNDERRUN);
+	STATUS_TO_TEXT(RXRDY);
+	STATUS_TO_TEXT(TXRQ);
+	STATUS_TO_TEXT(ILL_ACCESS);
+	printk("\n");
+}
+
+#else
+#define pr_debug_status(s)  do { } while (0)
+#endif
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 02f9cc30d77..41f361c49b3 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -351,6 +351,13 @@ config MTD_NAND_PASEMI
 	  Enables support for NAND Flash interface on PA Semi PWRficient
 	  based boards
 
+config MTD_NAND_TMIO
+	tristate "NAND Flash device on Toshiba Mobile IO Controller"
+	depends on MTD_NAND && MFD_TMIO
+	help
+	  Support for NAND flash connected to a Toshiba Mobile IO
+	  Controller in some PDAs, including the Sharp SL6000x.
+
 config MTD_NAND_NANDSIM
 	tristate "Support for NAND Flash Simulator"
 	depends on MTD_PARTITIONS
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index d772581de57..b786c5da82d 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
+obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
 obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
 obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 64002488c6e..917cf8d3ae9 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -19,7 +19,7 @@
 #include <asm/io.h>
 #include <asm/sizes.h>
 #include <mach/hardware.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <plat/orion_nand.h>
 
 #ifdef CONFIG_MTD_CMDLINE_PARTS
 static const char *part_probes[] = { "cmdlinepart", NULL };
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
new file mode 100644
index 00000000000..cbab654b03c
--- /dev/null
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -0,0 +1,556 @@
+/*
+ * Toshiba TMIO NAND flash controller driver
+ *
+ * Slightly murky pre-git history of the driver:
+ *
+ * Copyright (c) Ian Molton 2004, 2005, 2008
+ *    Original work, independant of sharps code. Included hardware ECC support.
+ *    Hard ECC did not work for writes in the early revisions.
+ * Copyright (c) Dirk Opfer 2005.
+ *    Modifications developed from sharps code but
+ *    NOT containing any, ported onto Ians base.
+ * Copyright (c) Chris Humbert 2005
+ * Copyright (c) Dmitry Baryshkov 2008
+ *    Minor fixes
+ *
+ * Parts copyright Sebastian Carlier
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * NAND Flash Host Controller Configuration Register
+ */
+#define CCR_COMMAND	0x04	/* w Command				*/
+#define CCR_BASE	0x10	/* l NAND Flash Control Reg Base Addr	*/
+#define CCR_INTP	0x3d	/* b Interrupt Pin			*/
+#define CCR_INTE	0x48	/* b Interrupt Enable			*/
+#define CCR_EC		0x4a	/* b Event Control			*/
+#define CCR_ICC		0x4c	/* b Internal Clock Control		*/
+#define CCR_ECCC	0x5b	/* b ECC Control			*/
+#define CCR_NFTC	0x60	/* b NAND Flash Transaction Control	*/
+#define CCR_NFM		0x61	/* b NAND Flash Monitor			*/
+#define CCR_NFPSC	0x62	/* b NAND Flash Power Supply Control	*/
+#define CCR_NFDC	0x63	/* b NAND Flash Detect Control		*/
+
+/*
+ * NAND Flash Control Register
+ */
+#define FCR_DATA	0x00	/* bwl Data Register			*/
+#define FCR_MODE	0x04	/* b Mode Register			*/
+#define FCR_STATUS	0x05	/* b Status Register			*/
+#define FCR_ISR		0x06	/* b Interrupt Status Register		*/
+#define FCR_IMR		0x07	/* b Interrupt Mask Register		*/
+
+/* FCR_MODE Register Command List */
+#define FCR_MODE_DATA	0x94	/* Data Data_Mode */
+#define FCR_MODE_COMMAND 0x95	/* Data Command_Mode */
+#define FCR_MODE_ADDRESS 0x96	/* Data Address_Mode */
+
+#define FCR_MODE_HWECC_CALC	0xB4	/* HW-ECC Data */
+#define FCR_MODE_HWECC_RESULT	0xD4	/* HW-ECC Calc result Read_Mode */
+#define FCR_MODE_HWECC_RESET	0xF4	/* HW-ECC Reset */
+
+#define FCR_MODE_POWER_ON	0x0C	/* Power Supply ON  to SSFDC card */
+#define FCR_MODE_POWER_OFF	0x08	/* Power Supply OFF to SSFDC card */
+
+#define FCR_MODE_LED_OFF	0x00	/* LED OFF */
+#define FCR_MODE_LED_ON		0x04	/* LED ON */
+
+#define FCR_MODE_EJECT_ON	0x68	/* Ejection events active  */
+#define FCR_MODE_EJECT_OFF	0x08	/* Ejection events ignored */
+
+#define FCR_MODE_LOCK		0x6C	/* Lock_Mode. Eject Switch Invalid */
+#define FCR_MODE_UNLOCK		0x0C	/* UnLock_Mode. Eject Switch is valid */
+
+#define FCR_MODE_CONTROLLER_ID	0x40	/* Controller ID Read */
+#define FCR_MODE_STANDBY	0x00	/* SSFDC card Changes Standby State */
+
+#define FCR_MODE_WE		0x80
+#define FCR_MODE_ECC1		0x40
+#define FCR_MODE_ECC0		0x20
+#define FCR_MODE_CE		0x10
+#define FCR_MODE_PCNT1		0x08
+#define FCR_MODE_PCNT0		0x04
+#define FCR_MODE_ALE		0x02
+#define FCR_MODE_CLE		0x01
+
+#define FCR_STATUS_BUSY		0x80
+
+/*--------------------------------------------------------------------------*/
+
+struct tmio_nand {
+	struct mtd_info mtd;
+	struct nand_chip chip;
+
+	struct platform_device *dev;
+
+	void __iomem *ccr;
+	void __iomem *fcr;
+	unsigned long fcr_phys;
+
+	unsigned int irq;
+
+	/* for tmio_nand_read_byte */
+	u8			read;
+	unsigned read_good:1;
+};
+
+#define mtd_to_tmio(m)			container_of(m, struct tmio_nand, mtd)
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+static const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+static void tmio_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+				   unsigned int ctrl)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	struct nand_chip *chip = mtd->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		u8 mode;
+
+		if (ctrl & NAND_NCE) {
+			mode = FCR_MODE_DATA;
+
+			if (ctrl & NAND_CLE)
+				mode |=  FCR_MODE_CLE;
+			else
+				mode &= ~FCR_MODE_CLE;
+
+			if (ctrl & NAND_ALE)
+				mode |=  FCR_MODE_ALE;
+			else
+				mode &= ~FCR_MODE_ALE;
+		} else {
+			mode = FCR_MODE_STANDBY;
+		}
+
+		tmio_iowrite8(mode, tmio->fcr + FCR_MODE);
+		tmio->read_good = 0;
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		tmio_iowrite8(cmd, chip->IO_ADDR_W);
+}
+
+static int tmio_nand_dev_ready(struct mtd_info *mtd)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	return !(tmio_ioread8(tmio->fcr + FCR_STATUS) & FCR_STATUS_BUSY);
+}
+
+static irqreturn_t tmio_irq(int irq, void *__tmio)
+{
+	struct tmio_nand *tmio = __tmio;
+	struct nand_chip *nand_chip = &tmio->chip;
+
+	/* disable RDYREQ interrupt */
+	tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+
+	if (unlikely(!waitqueue_active(&nand_chip->controller->wq)))
+		dev_warn(&tmio->dev->dev, "spurious interrupt\n");
+
+	wake_up(&nand_chip->controller->wq);
+	return IRQ_HANDLED;
+}
+
+/*
+  *The TMIO core has a RDYREQ interrupt on the posedge of #SMRB.
+  *This interrupt is normally disabled, but for long operations like
+  *erase and write, we enable it to wake us up.  The irq handler
+  *disables the interrupt.
+ */
+static int
+tmio_nand_wait(struct mtd_info *mtd, struct nand_chip *nand_chip)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	long timeout;
+
+	/* enable RDYREQ interrupt */
+	tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR);
+	tmio_iowrite8(0x81, tmio->fcr + FCR_IMR);
+
+	timeout = wait_event_timeout(nand_chip->controller->wq,
+		tmio_nand_dev_ready(mtd),
+		msecs_to_jiffies(nand_chip->state == FL_ERASING ? 400 : 20));
+
+	if (unlikely(!tmio_nand_dev_ready(mtd))) {
+		tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+		dev_warn(&tmio->dev->dev, "still busy with %s after %d ms\n",
+			nand_chip->state == FL_ERASING ? "erase" : "program",
+			nand_chip->state == FL_ERASING ? 400 : 20);
+
+	} else if (unlikely(!timeout)) {
+		tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+		dev_warn(&tmio->dev->dev, "timeout waiting for interrupt\n");
+	}
+
+	nand_chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+	return nand_chip->read_byte(mtd);
+}
+
+/*
+  *The TMIO controller combines two 8-bit data bytes into one 16-bit
+  *word. This function separates them so nand_base.c works as expected,
+  *especially its NAND_CMD_READID routines.
+ *
+  *To prevent stale data from being read, tmio_nand_hwcontrol() clears
+  *tmio->read_good.
+ */
+static u_char tmio_nand_read_byte(struct mtd_info *mtd)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	unsigned int data;
+
+	if (tmio->read_good--)
+		return tmio->read;
+
+	data = tmio_ioread16(tmio->fcr + FCR_DATA);
+	tmio->read = data >> 8;
+	return data;
+}
+
+/*
+  *The TMIO controller converts an 8-bit NAND interface to a 16-bit
+  *bus interface, so all data reads and writes must be 16-bit wide.
+  *Thus, we implement 16-bit versions of the read, write, and verify
+  *buffer functions.
+ */
+static void
+tmio_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	tmio_iowrite16_rep(tmio->fcr + FCR_DATA, buf, len >> 1);
+}
+
+static void tmio_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	tmio_ioread16_rep(tmio->fcr + FCR_DATA, buf, len >> 1);
+}
+
+static int
+tmio_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	u16				*p = (u16 *) buf;
+
+	for (len >>= 1; len; len--)
+		if (*(p++) != tmio_ioread16(tmio->fcr + FCR_DATA))
+			return -EFAULT;
+	return 0;
+}
+
+static void tmio_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+	tmio_iowrite8(FCR_MODE_HWECC_RESET, tmio->fcr + FCR_MODE);
+	tmio_ioread8(tmio->fcr + FCR_DATA);	/* dummy read */
+	tmio_iowrite8(FCR_MODE_HWECC_CALC, tmio->fcr + FCR_MODE);
+}
+
+static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+							u_char *ecc_code)
+{
+	struct tmio_nand *tmio = mtd_to_tmio(mtd);
+	unsigned int ecc;
+
+	tmio_iowrite8(FCR_MODE_HWECC_RESULT, tmio->fcr + FCR_MODE);
+
+	ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+	ecc_code[1] = ecc;	/* 000-255 LP7-0 */
+	ecc_code[0] = ecc >> 8;	/* 000-255 LP15-8 */
+	ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+	ecc_code[2] = ecc;	/* 000-255 CP5-0,11b */
+	ecc_code[4] = ecc >> 8;	/* 256-511 LP7-0 */
+	ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+	ecc_code[3] = ecc;	/* 256-511 LP15-8 */
+	ecc_code[5] = ecc >> 8;	/* 256-511 CP5-0,11b */
+
+	tmio_iowrite8(FCR_MODE_DATA, tmio->fcr + FCR_MODE);
+	return 0;
+}
+
+static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+	int ret;
+
+	if (cell->enable) {
+		ret = cell->enable(dev);
+		if (ret)
+			return ret;
+	}
+
+	/* (4Ch) CLKRUN Enable    1st spcrunc */
+	tmio_iowrite8(0x81, tmio->ccr + CCR_ICC);
+
+	/* (10h)BaseAddress    0x1000 spba.spba2 */
+	tmio_iowrite16(tmio->fcr_phys, tmio->ccr + CCR_BASE);
+	tmio_iowrite16(tmio->fcr_phys >> 16, tmio->ccr + CCR_BASE + 16);
+
+	/* (04h)Command Register I/O spcmd */
+	tmio_iowrite8(0x02, tmio->ccr + CCR_COMMAND);
+
+	/* (62h) Power Supply Control ssmpwc */
+	/* HardPowerOFF - SuspendOFF - PowerSupplyWait_4MS */
+	tmio_iowrite8(0x02, tmio->ccr + CCR_NFPSC);
+
+	/* (63h) Detect Control ssmdtc */
+	tmio_iowrite8(0x02, tmio->ccr + CCR_NFDC);
+
+	/* Interrupt status register clear sintst */
+	tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR);
+
+	/* After power supply, Media are reset smode */
+	tmio_iowrite8(FCR_MODE_POWER_ON, tmio->fcr + FCR_MODE);
+	tmio_iowrite8(FCR_MODE_COMMAND, tmio->fcr + FCR_MODE);
+	tmio_iowrite8(NAND_CMD_RESET, tmio->fcr + FCR_DATA);
+
+	/* Standby Mode smode */
+	tmio_iowrite8(FCR_MODE_STANDBY, tmio->fcr + FCR_MODE);
+
+	mdelay(5);
+
+	return 0;
+}
+
+static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+	tmio_iowrite8(FCR_MODE_POWER_OFF, tmio->fcr + FCR_MODE);
+	if (cell->disable)
+		cell->disable(dev);
+}
+
+static int tmio_probe(struct platform_device *dev)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+	struct tmio_nand_data *data = cell->driver_data;
+	struct resource *fcr = platform_get_resource(dev,
+			IORESOURCE_MEM, 0);
+	struct resource *ccr = platform_get_resource(dev,
+			IORESOURCE_MEM, 1);
+	int irq = platform_get_irq(dev, 0);
+	struct tmio_nand *tmio;
+	struct mtd_info *mtd;
+	struct nand_chip *nand_chip;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *parts;
+	int nbparts = 0;
+#endif
+	int retval;
+
+	if (data == NULL)
+		dev_warn(&dev->dev, "NULL platform data!\n");
+
+	tmio = kzalloc(sizeof *tmio, GFP_KERNEL);
+	if (!tmio) {
+		retval = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	tmio->dev = dev;
+
+	platform_set_drvdata(dev, tmio);
+	mtd = &tmio->mtd;
+	nand_chip = &tmio->chip;
+	mtd->priv = nand_chip;
+	mtd->name = "tmio-nand";
+
+	tmio->ccr = ioremap(ccr->start, ccr->end - ccr->start + 1);
+	if (!tmio->ccr) {
+		retval = -EIO;
+		goto err_iomap_ccr;
+	}
+
+	tmio->fcr_phys = (unsigned long)fcr->start;
+	tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1);
+	if (!tmio->fcr) {
+		retval = -EIO;
+		goto err_iomap_fcr;
+	}
+
+	retval = tmio_hw_init(dev, tmio);
+	if (retval)
+		goto err_hwinit;
+
+	/* Set address of NAND IO lines */
+	nand_chip->IO_ADDR_R = tmio->fcr;
+	nand_chip->IO_ADDR_W = tmio->fcr;
+
+	/* Set address of hardware control function */
+	nand_chip->cmd_ctrl = tmio_nand_hwcontrol;
+	nand_chip->dev_ready = tmio_nand_dev_ready;
+	nand_chip->read_byte = tmio_nand_read_byte;
+	nand_chip->write_buf = tmio_nand_write_buf;
+	nand_chip->read_buf = tmio_nand_read_buf;
+	nand_chip->verify_buf = tmio_nand_verify_buf;
+
+	/* set eccmode using hardware ECC */
+	nand_chip->ecc.mode = NAND_ECC_HW;
+	nand_chip->ecc.size = 512;
+	nand_chip->ecc.bytes = 6;
+	nand_chip->ecc.hwctl = tmio_nand_enable_hwecc;
+	nand_chip->ecc.calculate = tmio_nand_calculate_ecc;
+	nand_chip->ecc.correct = nand_correct_data;
+
+	if (data)
+		nand_chip->badblock_pattern = data->badblock_pattern;
+
+	/* 15 us command delay time */
+	nand_chip->chip_delay = 15;
+
+	retval = request_irq(irq, &tmio_irq,
+				IRQF_DISABLED, dev->dev.bus_id, tmio);
+	if (retval) {
+		dev_err(&dev->dev, "request_irq error %d\n", retval);
+		goto err_irq;
+	}
+
+	tmio->irq = irq;
+	nand_chip->waitfunc = tmio_nand_wait;
+
+	/* Scan to find existence of the device */
+	if (nand_scan(mtd, 1)) {
+		retval = -ENODEV;
+		goto err_scan;
+	}
+	/* Register the partitions */
+#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
+#endif
+	if (nbparts <= 0 && data) {
+		parts = data->partition;
+		nbparts = data->num_partitions;
+	}
+
+	if (nbparts)
+		retval = add_mtd_partitions(mtd, parts, nbparts);
+	else
+#endif
+	retval = add_mtd_device(mtd);
+
+	if (!retval)
+		return retval;
+
+	nand_release(mtd);
+
+err_scan:
+	if (tmio->irq)
+		free_irq(tmio->irq, tmio);
+err_irq:
+	tmio_hw_stop(dev, tmio);
+err_hwinit:
+	iounmap(tmio->fcr);
+err_iomap_fcr:
+	iounmap(tmio->ccr);
+err_iomap_ccr:
+	kfree(tmio);
+err_kzalloc:
+	return retval;
+}
+
+static int tmio_remove(struct platform_device *dev)
+{
+	struct tmio_nand *tmio = platform_get_drvdata(dev);
+
+	nand_release(&tmio->mtd);
+	if (tmio->irq)
+		free_irq(tmio->irq, tmio);
+	tmio_hw_stop(dev, tmio);
+	iounmap(tmio->fcr);
+	iounmap(tmio->ccr);
+	kfree(tmio);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tmio_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+	if (cell->suspend)
+		cell->suspend(dev);
+
+	tmio_hw_stop(dev, platform_get_drvdata(dev));
+	return 0;
+}
+
+static int tmio_resume(struct platform_device *dev)
+{
+	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+	/* FIXME - is this required or merely another attack of the broken
+	 * SHARP platform? Looks suspicious.
+	 */
+	tmio_hw_init(dev, platform_get_drvdata(dev));
+
+	if (cell->resume)
+		cell->resume(dev);
+
+	return 0;
+}
+#else
+#define tmio_suspend NULL
+#define tmio_resume NULL
+#endif
+
+static struct platform_driver tmio_driver = {
+	.driver.name	= "tmio-nand",
+	.driver.owner	= THIS_MODULE,
+	.probe		= tmio_probe,
+	.remove		= tmio_remove,
+	.suspend	= tmio_suspend,
+	.resume		= tmio_resume,
+};
+
+static int __init tmio_init(void)
+{
+	return platform_driver_register(&tmio_driver);
+}
+
+static void __exit tmio_exit(void)
+{
+	platform_driver_unregister(&tmio_driver);
+}
+
+module_init(tmio_init);
+module_exit(tmio_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton, Dirk Opfer, Chris Humbert, Dmitry Baryshkov");
+MODULE_DESCRIPTION("NAND flash driver on Toshiba Mobile IO controller");
+MODULE_ALIAS("platform:tmio-nand");
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 35264c244cf..82d7be1655d 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -47,7 +47,7 @@ MODULE_DESCRIPTION("Atheros 1000M Ethernet Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
-static inline void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter);
+static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter);
 
 static const u16
 atl1e_rx_page_vld_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] =
@@ -1037,7 +1037,7 @@ static inline void atl1e_configure_dma(struct atl1e_adapter *adapter)
 	return;
 }
 
-static inline void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter)
+static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter)
 {
 	u32 value;
 	struct atl1e_hw *hw = &adapter->hw;
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 4bf4f7b205f..b468f904c7f 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -40,20 +40,20 @@
 #define DP(__mask, __fmt, __args...) do { \
 	if (bp->msglevel & (__mask)) \
 		printk(DP_LEVEL "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-			bp->dev?(bp->dev->name):"?", ##__args); \
+			bp->dev ? (bp->dev->name) : "?", ##__args); \
 	} while (0)
 
 /* errors debug print */
 #define BNX2X_DBG_ERR(__fmt, __args...) do { \
 	if (bp->msglevel & NETIF_MSG_PROBE) \
 		printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-			bp->dev?(bp->dev->name):"?", ##__args); \
+			bp->dev ? (bp->dev->name) : "?", ##__args); \
 	} while (0)
 
 /* for errors (never masked) */
 #define BNX2X_ERR(__fmt, __args...) do { \
 	printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
-		bp->dev?(bp->dev->name):"?", ##__args); \
+		bp->dev ? (bp->dev->name) : "?", ##__args); \
 	} while (0)
 
 /* before we have a dev->name use dev_info() */
@@ -120,16 +120,8 @@
 #define SHMEM_RD(bp, field)		REG_RD(bp, SHMEM_ADDR(bp, field))
 #define SHMEM_WR(bp, field, val)	REG_WR(bp, SHMEM_ADDR(bp, field), val)
 
-#define NIG_WR(reg, val)	REG_WR(bp, reg, val)
-#define EMAC_WR(reg, val)	REG_WR(bp, emac_base + reg, val)
-#define BMAC_WR(reg, val)	REG_WR(bp, GRCBASE_NIG + bmac_addr + reg, val)
-
-
-#define for_each_queue(bp, var)	for (var = 0; var < bp->num_queues; var++)
-
-#define for_each_nondefault_queue(bp, var) \
-				for (var = 1; var < bp->num_queues; var++)
-#define is_multi(bp)		(bp->num_queues > 1)
+#define EMAC_RD(bp, reg)		REG_RD(bp, emac_base + reg)
+#define EMAC_WR(bp, reg, val)		REG_WR(bp, emac_base + reg, val)
 
 
 /* fast path */
@@ -163,7 +155,7 @@ struct sw_rx_page {
 #define NUM_RX_SGE_PAGES		2
 #define RX_SGE_CNT		(BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
 #define MAX_RX_SGE_CNT			(RX_SGE_CNT - 2)
-/* RX_SGE_CNT is promissed to be a power of 2 */
+/* RX_SGE_CNT is promised to be a power of 2 */
 #define RX_SGE_MASK			(RX_SGE_CNT - 1)
 #define NUM_RX_SGE			(RX_SGE_CNT * NUM_RX_SGE_PAGES)
 #define MAX_RX_SGE			(NUM_RX_SGE - 1)
@@ -258,8 +250,7 @@ struct bnx2x_fastpath {
 
 	unsigned long		tx_pkt,
 				rx_pkt,
-				rx_calls,
-				rx_alloc_failed;
+				rx_calls;
 	/* TPA related */
 	struct sw_rx_bd		tpa_pool[ETH_MAX_AGGREGATION_QUEUES_E1H];
 	u8			tpa_state[ETH_MAX_AGGREGATION_QUEUES_E1H];
@@ -275,6 +266,15 @@ struct bnx2x_fastpath {
 
 #define bnx2x_fp(bp, nr, var)		(bp->fp[nr].var)
 
+#define BNX2X_HAS_TX_WORK(fp) \
+			((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \
+			 (fp->tx_pkt_prod != fp->tx_pkt_cons))
+
+#define BNX2X_HAS_RX_WORK(fp) \
+			(fp->rx_comp_cons != le16_to_cpu(*fp->rx_cons_sb))
+
+#define BNX2X_HAS_WORK(fp)	(BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp))
+
 
 /* MC hsi */
 #define MAX_FETCH_BD			13	/* HW max BDs per packet */
@@ -317,7 +317,7 @@ struct bnx2x_fastpath {
 #define RCQ_BD(x)			((x) & MAX_RCQ_BD)
 
 
-/* This is needed for determening of last_max */
+/* This is needed for determining of last_max */
 #define SUB_S16(a, b)			(s16)((s16)(a) - (s16)(b))
 
 #define __SGE_MASK_SET_BIT(el, bit) \
@@ -386,20 +386,28 @@ struct bnx2x_fastpath {
 #define TPA_TYPE(cqe_fp_flags)		((cqe_fp_flags) & \
 					 (TPA_TYPE_START | TPA_TYPE_END))
 
-#define BNX2X_RX_SUM_OK(cqe) \
-			(!(cqe->fast_path_cqe.status_flags & \
-			 (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG | \
-			  ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)))
+#define ETH_RX_ERROR_FALGS		ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG
+
+#define BNX2X_IP_CSUM_ERR(cqe) \
+			(!((cqe)->fast_path_cqe.status_flags & \
+			   ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG) && \
+			 ((cqe)->fast_path_cqe.type_error_flags & \
+			  ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG))
+
+#define BNX2X_L4_CSUM_ERR(cqe) \
+			(!((cqe)->fast_path_cqe.status_flags & \
+			   ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) && \
+			 ((cqe)->fast_path_cqe.type_error_flags & \
+			  ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG))
+
+#define BNX2X_RX_CSUM_OK(cqe) \
+			(!(BNX2X_L4_CSUM_ERR(cqe) || BNX2X_IP_CSUM_ERR(cqe)))
 
 #define BNX2X_RX_SUM_FIX(cqe) \
 			((le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) & \
 			  PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) == \
 			 (1 << PARSING_FLAGS_OVER_ETHERNET_PROTOCOL_SHIFT))
 
-#define ETH_RX_ERROR_FALGS	(ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG | \
-				 ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG | \
-				 ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG)
-
 
 #define FP_USB_FUNC_OFF			(2 + 2*HC_USTORM_SB_NUM_INDICES)
 #define FP_CSB_FUNC_OFF			(2 + 2*HC_CSTORM_SB_NUM_INDICES)
@@ -647,6 +655,8 @@ struct bnx2x_eth_stats {
 
 	u32 brb_drop_hi;
 	u32 brb_drop_lo;
+	u32 brb_truncate_hi;
+	u32 brb_truncate_lo;
 
 	u32 jabber_packets_received;
 
@@ -663,6 +673,9 @@ struct bnx2x_eth_stats {
 	u32 mac_discard;
 
 	u32 driver_xoff;
+	u32 rx_err_discard_pkt;
+	u32 rx_skb_alloc_failed;
+	u32 hw_csum_err;
 };
 
 #define STATS_OFFSET32(stat_name) \
@@ -753,7 +766,6 @@ struct bnx2x {
 	u16			def_att_idx;
 	u32			attn_state;
 	struct attn_route	attn_group[MAX_DYNAMIC_ATTN_GRPS];
-	u32			aeu_mask;
 	u32			nig_mask;
 
 	/* slow path ring */
@@ -772,7 +784,7 @@ struct bnx2x {
 	u8			stats_pending;
 	u8			set_mac_pending;
 
-	/* End of fileds used in the performance code paths */
+	/* End of fields used in the performance code paths */
 
 	int			panic;
 	int			msglevel;
@@ -794,9 +806,6 @@ struct bnx2x {
 #define BP_FUNC(bp)			(bp->func)
 #define BP_E1HVN(bp)			(bp->func >> 1)
 #define BP_L_ID(bp)			(BP_E1HVN(bp) << 2)
-/* assorted E1HVN */
-#define IS_E1HMF(bp)			(bp->e1hmf != 0)
-#define BP_MAX_QUEUES(bp)		(IS_E1HMF(bp) ? 4 : 16)
 
 	int			pm_cap;
 	int			pcie_cap;
@@ -821,6 +830,7 @@ struct bnx2x {
 	u32			mf_config;
 	u16			e1hov;
 	u8			e1hmf;
+#define IS_E1HMF(bp)			(bp->e1hmf != 0)
 
 	u8			wol;
 
@@ -836,7 +846,6 @@ struct bnx2x {
 	u16			rx_ticks_int;
 	u16			rx_ticks;
 
-	u32			stats_ticks;
 	u32			lin_cnt;
 
 	int			state;
@@ -852,6 +861,7 @@ struct bnx2x {
 #define BNX2X_STATE_ERROR		0xf000
 
 	int			num_queues;
+#define BP_MAX_QUEUES(bp)		(IS_E1HMF(bp) ? 4 : 16)
 
 	u32			rx_mode;
 #define BNX2X_RX_MODE_NONE		0
@@ -902,10 +912,17 @@ struct bnx2x {
 };
 
 
+#define for_each_queue(bp, var)	for (var = 0; var < bp->num_queues; var++)
+
+#define for_each_nondefault_queue(bp, var) \
+				for (var = 1; var < bp->num_queues; var++)
+#define is_multi(bp)		(bp->num_queues > 1)
+
+
 void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
 void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
 		      u32 len32);
-int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode);
+int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
 
 static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 			   int wait)
@@ -976,7 +993,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 #define PCICFG_LINK_SPEED_SHIFT		16
 
 
-#define BNX2X_NUM_STATS			39
+#define BNX2X_NUM_STATS			42
 #define BNX2X_NUM_TESTS			8
 
 #define BNX2X_MAC_LOOPBACK		0
@@ -1007,10 +1024,10 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 /* resolution of the rate shaping timer - 100 usec */
 #define RS_PERIODIC_TIMEOUT_USEC	100
 /* resolution of fairness algorithm in usecs -
-   coefficient for clauclating the actuall t fair */
+   coefficient for calculating the actual t fair */
 #define T_FAIR_COEF			10000000
 /* number of bytes in single QM arbitration cycle -
-   coeffiecnt for calculating the fairness timer */
+   coefficient for calculating the fairness timer */
 #define QM_ARB_BYTES			40000
 #define FAIR_MEM			2
 
diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h
index e3da7f69d27..192fa981b93 100644
--- a/drivers/net/bnx2x_fw_defs.h
+++ b/drivers/net/bnx2x_fw_defs.h
@@ -9,165 +9,171 @@
 
 
 #define CSTORM_ASSERT_LIST_INDEX_OFFSET \
-	(IS_E1H_OFFSET? 0x7000 : 0x1000)
+	(IS_E1H_OFFSET ? 0x7000 : 0x1000)
 #define CSTORM_ASSERT_LIST_OFFSET(idx) \
-	(IS_E1H_OFFSET? (0x7020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+	(IS_E1H_OFFSET ? (0x7020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define CSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-	(IS_E1H_OFFSET? (0x8522 + ((function>>1) * 0x40) + ((function&1) \
-	* 0x100) + (index * 0x4)) : (0x1922 + (function * 0x40) + (index \
-	* 0x4)))
+	(IS_E1H_OFFSET ? (0x8522 + ((function>>1) * 0x40) + \
+	((function&1) * 0x100) + (index * 0x4)) : (0x1922 + (function * \
+	0x40) + (index * 0x4)))
 #define CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x8500 + ((function>>1) * 0x40) + ((function&1) \
-	* 0x100)) : (0x1900 + (function * 0x40)))
+	(IS_E1H_OFFSET ? (0x8500 + ((function>>1) * 0x40) + \
+	((function&1) * 0x100)) : (0x1900 + (function * 0x40)))
 #define CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x8508 + ((function>>1) * 0x40) + ((function&1) \
-	* 0x100)) : (0x1908 + (function * 0x40)))
+	(IS_E1H_OFFSET ? (0x8508 + ((function>>1) * 0x40) + \
+	((function&1) * 0x100)) : (0x1908 + (function * 0x40)))
 #define CSTORM_FUNCTION_MODE_OFFSET \
-	(IS_E1H_OFFSET? 0x11e8 : 0xffffffff)
+	(IS_E1H_OFFSET ? 0x11e8 : 0xffffffff)
 #define CSTORM_HC_BTR_OFFSET(port) \
-	(IS_E1H_OFFSET? (0x8704 + (port * 0xf0)) : (0x1984 + (port * 0xc0)))
+	(IS_E1H_OFFSET ? (0x8704 + (port * 0xf0)) : (0x1984 + (port * 0xc0)))
 #define CSTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index) \
-	(IS_E1H_OFFSET? (0x801a + (port * 0x280) + (cpu_id * 0x28) + \
+	(IS_E1H_OFFSET ? (0x801a + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)) : (0x141a + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)))
 #define CSTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index) \
-	(IS_E1H_OFFSET? (0x8018 + (port * 0x280) + (cpu_id * 0x28) + \
+	(IS_E1H_OFFSET ? (0x8018 + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)) : (0x1418 + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)))
 #define CSTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id) \
-	(IS_E1H_OFFSET? (0x8000 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(IS_E1H_OFFSET ? (0x8000 + (port * 0x280) + (cpu_id * 0x28)) : \
 	(0x1400 + (port * 0x280) + (cpu_id * 0x28)))
 #define CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, cpu_id) \
-	(IS_E1H_OFFSET? (0x8008 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(IS_E1H_OFFSET ? (0x8008 + (port * 0x280) + (cpu_id * 0x28)) : \
 	(0x1408 + (port * 0x280) + (cpu_id * 0x28)))
 #define CSTORM_STATS_FLAGS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x1108 + (function * 0x8)) : (0x5108 + \
+	(IS_E1H_OFFSET ? (0x1108 + (function * 0x8)) : (0x5108 + \
 	(function * 0x8)))
 #define TSTORM_APPROXIMATE_MATCH_MULTICAST_FILTERING_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x31c0 + (function * 0x20)) : 0xffffffff)
+	(IS_E1H_OFFSET ? (0x31c0 + (function * 0x20)) : 0xffffffff)
 #define TSTORM_ASSERT_LIST_INDEX_OFFSET \
-	(IS_E1H_OFFSET? 0xa000 : 0x1000)
+	(IS_E1H_OFFSET ? 0xa000 : 0x1000)
 #define TSTORM_ASSERT_LIST_OFFSET(idx) \
-	(IS_E1H_OFFSET? (0xa020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+	(IS_E1H_OFFSET ? (0xa020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define TSTORM_CLIENT_CONFIG_OFFSET(port, client_id) \
-	(IS_E1H_OFFSET? (0x3358 + (port * 0x3e8) + (client_id * 0x28)) : \
-	(0x9c8 + (port * 0x2f8) + (client_id * 0x28)))
+	(IS_E1H_OFFSET ? (0x3358 + (port * 0x3e8) + (client_id * 0x28)) \
+	: (0x9c8 + (port * 0x2f8) + (client_id * 0x28)))
 #define TSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-	(IS_E1H_OFFSET? (0xb01a + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0) + (index * 0x4)) : (0x141a + (function * 0x28) + (index * \
-	0x4)))
+	(IS_E1H_OFFSET ? (0xb01a + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0) + (index * 0x4)) : (0x141a + (function * \
+	0x28) + (index * 0x4)))
 #define TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0xb000 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1400 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0xb000 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1400 + (function * 0x28)))
 #define TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-	(IS_E1H_OFFSET? (0xb008 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1408 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0xb008 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1408 + (function * 0x28)))
 #define TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2b80 + (function * 0x8)) : (0x4b68 + \
+	(IS_E1H_OFFSET ? (0x2b80 + (function * 0x8)) : (0x4b68 + \
 	(function * 0x8)))
 #define TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x3000 + (function * 0x38)) : (0x1500 + \
+	(IS_E1H_OFFSET ? (0x3000 + (function * 0x38)) : (0x1500 + \
 	(function * 0x38)))
 #define TSTORM_FUNCTION_MODE_OFFSET \
-	(IS_E1H_OFFSET? 0x1ad0 : 0xffffffff)
+	(IS_E1H_OFFSET ? 0x1ad0 : 0xffffffff)
 #define TSTORM_HC_BTR_OFFSET(port) \
-	(IS_E1H_OFFSET? (0xb144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+	(IS_E1H_OFFSET ? (0xb144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
 #define TSTORM_INDIRECTION_TABLE_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x12c8 + (function * 0x80)) : (0x22c8 + \
+	(IS_E1H_OFFSET ? (0x12c8 + (function * 0x80)) : (0x22c8 + \
 	(function * 0x80)))
 #define TSTORM_INDIRECTION_TABLE_SIZE 0x80
 #define TSTORM_MAC_FILTER_CONFIG_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x3008 + (function * 0x38)) : (0x1508 + \
+	(IS_E1H_OFFSET ? (0x3008 + (function * 0x38)) : (0x1508 + \
 	(function * 0x38)))
+#define TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, stats_counter_id) \
+	(IS_E1H_OFFSET ? (0x2010 + (port * 0x5b0) + (stats_counter_id * \
+	0x50)) : (0x4000 + (port * 0x3f0) + (stats_counter_id * 0x38)))
 #define TSTORM_RX_PRODS_OFFSET(port, client_id) \
-	(IS_E1H_OFFSET? (0x3350 + (port * 0x3e8) + (client_id * 0x28)) : \
-	(0x9c0 + (port * 0x2f8) + (client_id * 0x28)))
+	(IS_E1H_OFFSET ? (0x3350 + (port * 0x3e8) + (client_id * 0x28)) \
+	: (0x9c0 + (port * 0x2f8) + (client_id * 0x28)))
 #define TSTORM_STATS_FLAGS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2c00 + (function * 0x8)) : (0x4b88 + \
+	(IS_E1H_OFFSET ? (0x2c00 + (function * 0x8)) : (0x4b88 + \
 	(function * 0x8)))
-#define TSTORM_TPA_EXIST_OFFSET (IS_E1H_OFFSET? 0x3b30 : 0x1c20)
-#define USTORM_AGG_DATA_OFFSET (IS_E1H_OFFSET? 0xa040 : 0x2c10)
-#define USTORM_AGG_DATA_SIZE (IS_E1H_OFFSET? 0x2440 : 0x1200)
+#define TSTORM_TPA_EXIST_OFFSET (IS_E1H_OFFSET ? 0x3b30 : 0x1c20)
+#define USTORM_AGG_DATA_OFFSET (IS_E1H_OFFSET ? 0xa040 : 0x2c10)
+#define USTORM_AGG_DATA_SIZE (IS_E1H_OFFSET ? 0x2440 : 0x1200)
 #define USTORM_ASSERT_LIST_INDEX_OFFSET \
-	(IS_E1H_OFFSET? 0x8000 : 0x1000)
+	(IS_E1H_OFFSET ? 0x8000 : 0x1000)
 #define USTORM_ASSERT_LIST_OFFSET(idx) \
-	(IS_E1H_OFFSET? (0x8020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+	(IS_E1H_OFFSET ? (0x8020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define USTORM_CQE_PAGE_BASE_OFFSET(port, clientId) \
-	(IS_E1H_OFFSET? (0x3298 + (port * 0x258) + (clientId * 0x18)) : \
+	(IS_E1H_OFFSET ? (0x3298 + (port * 0x258) + (clientId * 0x18)) : \
 	(0x5450 + (port * 0x1c8) + (clientId * 0x18)))
 #define USTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-	(IS_E1H_OFFSET? (0x951a + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0) + (index * 0x4)) : (0x191a + (function * 0x28) + (index * \
-	0x4)))
+	(IS_E1H_OFFSET ? (0x951a + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0) + (index * 0x4)) : (0x191a + (function * \
+	0x28) + (index * 0x4)))
 #define USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x9500 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1900 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0x9500 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1900 + (function * 0x28)))
 #define USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x9508 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1908 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0x9508 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1908 + (function * 0x28)))
 #define USTORM_FUNCTION_MODE_OFFSET \
-	(IS_E1H_OFFSET? 0x2448 : 0xffffffff)
+	(IS_E1H_OFFSET ? 0x2448 : 0xffffffff)
 #define USTORM_HC_BTR_OFFSET(port) \
-	(IS_E1H_OFFSET? (0x9644 + (port * 0xd0)) : (0x1954 + (port * 0xb8)))
+	(IS_E1H_OFFSET ? (0x9644 + (port * 0xd0)) : (0x1954 + (port * 0xb8)))
 #define USTORM_MAX_AGG_SIZE_OFFSET(port, clientId) \
-	(IS_E1H_OFFSET? (0x3290 + (port * 0x258) + (clientId * 0x18)) : \
+	(IS_E1H_OFFSET ? (0x3290 + (port * 0x258) + (clientId * 0x18)) : \
 	(0x5448 + (port * 0x1c8) + (clientId * 0x18)))
 #define USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2408 + (function * 0x8)) : (0x5408 + \
+	(IS_E1H_OFFSET ? (0x2408 + (function * 0x8)) : (0x5408 + \
 	(function * 0x8)))
 #define USTORM_SB_HC_DISABLE_OFFSET(port, cpu_id, index) \
-	(IS_E1H_OFFSET? (0x901a + (port * 0x280) + (cpu_id * 0x28) + \
+	(IS_E1H_OFFSET ? (0x901a + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)) : (0x141a + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)))
 #define USTORM_SB_HC_TIMEOUT_OFFSET(port, cpu_id, index) \
-	(IS_E1H_OFFSET? (0x9018 + (port * 0x280) + (cpu_id * 0x28) + \
+	(IS_E1H_OFFSET ? (0x9018 + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)) : (0x1418 + (port * 0x280) + (cpu_id * 0x28) + \
 	(index * 0x4)))
 #define USTORM_SB_HOST_SB_ADDR_OFFSET(port, cpu_id) \
-	(IS_E1H_OFFSET? (0x9000 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(IS_E1H_OFFSET ? (0x9000 + (port * 0x280) + (cpu_id * 0x28)) : \
 	(0x1400 + (port * 0x280) + (cpu_id * 0x28)))
 #define USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, cpu_id) \
-	(IS_E1H_OFFSET? (0x9008 + (port * 0x280) + (cpu_id * 0x28)) : \
+	(IS_E1H_OFFSET ? (0x9008 + (port * 0x280) + (cpu_id * 0x28)) : \
 	(0x1408 + (port * 0x280) + (cpu_id * 0x28)))
 #define XSTORM_ASSERT_LIST_INDEX_OFFSET \
-	(IS_E1H_OFFSET? 0x9000 : 0x1000)
+	(IS_E1H_OFFSET ? 0x9000 : 0x1000)
 #define XSTORM_ASSERT_LIST_OFFSET(idx) \
-	(IS_E1H_OFFSET? (0x9020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
+	(IS_E1H_OFFSET ? (0x9020 + (idx * 0x10)) : (0x1020 + (idx * 0x10)))
 #define XSTORM_CMNG_PER_PORT_VARS_OFFSET(port) \
-	(IS_E1H_OFFSET? (0x24a8 + (port * 0x40)) : (0x3ba0 + (port * 0x40)))
+	(IS_E1H_OFFSET ? (0x24a8 + (port * 0x40)) : (0x3ba0 + (port * 0x40)))
 #define XSTORM_DEF_SB_HC_DISABLE_OFFSET(function, index) \
-	(IS_E1H_OFFSET? (0xa01a + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0) + (index * 0x4)) : (0x141a + (function * 0x28) + (index * \
-	0x4)))
+	(IS_E1H_OFFSET ? (0xa01a + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0) + (index * 0x4)) : (0x141a + (function * \
+	0x28) + (index * 0x4)))
 #define XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0xa000 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1400 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0xa000 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1400 + (function * 0x28)))
 #define XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(function) \
-	(IS_E1H_OFFSET? (0xa008 + ((function>>1) * 0x28) + ((function&1) \
-	* 0xa0)) : (0x1408 + (function * 0x28)))
+	(IS_E1H_OFFSET ? (0xa008 + ((function>>1) * 0x28) + \
+	((function&1) * 0xa0)) : (0x1408 + (function * 0x28)))
 #define XSTORM_E1HOV_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2ab8 + (function * 0x2)) : 0xffffffff)
+	(IS_E1H_OFFSET ? (0x2ab8 + (function * 0x2)) : 0xffffffff)
 #define XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2418 + (function * 0x8)) : (0x3b70 + \
+	(IS_E1H_OFFSET ? (0x2418 + (function * 0x8)) : (0x3b70 + \
 	(function * 0x8)))
 #define XSTORM_FAIRNESS_PER_VN_VARS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2568 + (function * 0x70)) : (0x3c60 + \
+	(IS_E1H_OFFSET ? (0x2568 + (function * 0x70)) : (0x3c60 + \
 	(function * 0x70)))
 #define XSTORM_FUNCTION_MODE_OFFSET \
-	(IS_E1H_OFFSET? 0x2ac8 : 0xffffffff)
+	(IS_E1H_OFFSET ? 0x2ac8 : 0xffffffff)
 #define XSTORM_HC_BTR_OFFSET(port) \
-	(IS_E1H_OFFSET? (0xa144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+	(IS_E1H_OFFSET ? (0xa144 + (port * 0x30)) : (0x1454 + (port * 0x18)))
+#define XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, stats_counter_id) \
+	(IS_E1H_OFFSET ? (0xc000 + (port * 0x3f0) + (stats_counter_id * \
+	0x38)) : (0x3378 + (port * 0x3f0) + (stats_counter_id * 0x38)))
 #define XSTORM_RATE_SHAPING_PER_VN_VARS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2528 + (function * 0x70)) : (0x3c20 + \
+	(IS_E1H_OFFSET ? (0x2528 + (function * 0x70)) : (0x3c20 + \
 	(function * 0x70)))
 #define XSTORM_SPQ_PAGE_BASE_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2000 + (function * 0x10)) : (0x3328 + \
+	(IS_E1H_OFFSET ? (0x2000 + (function * 0x10)) : (0x3328 + \
 	(function * 0x10)))
 #define XSTORM_SPQ_PROD_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x2008 + (function * 0x10)) : (0x3330 + \
+	(IS_E1H_OFFSET ? (0x2008 + (function * 0x10)) : (0x3330 + \
 	(function * 0x10)))
 #define XSTORM_STATS_FLAGS_OFFSET(function) \
-	(IS_E1H_OFFSET? (0x23d8 + (function * 0x8)) : (0x3b60 + \
+	(IS_E1H_OFFSET ? (0x23d8 + (function * 0x8)) : (0x3b60 + \
 	(function * 0x8)))
 #define COMMON_ASM_INVALID_ASSERT_OPCODE 0x0
 
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index d3e8198d7db..efd764427fa 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -1268,7 +1268,7 @@ struct doorbell {
 
 
 /*
- * IGU driver acknowlegement register
+ * IGU driver acknowledgement register
  */
 struct igu_ack_register {
 #if defined(__BIG_ENDIAN)
@@ -1882,7 +1882,7 @@ struct timers_block_context {
 };
 
 /*
- * structure for easy accessability to assembler
+ * structure for easy accessibility to assembler
  */
 struct eth_tx_bd_flags {
 	u8 as_bitfield;
@@ -2044,7 +2044,7 @@ struct eth_context {
 
 
 /*
- * ethernet doorbell
+ * Ethernet doorbell
  */
 struct eth_tx_doorbell {
 #if defined(__BIG_ENDIAN)
@@ -2256,7 +2256,7 @@ struct ramrod_data {
 };
 
 /*
- * union for ramrod data for ethernet protocol (CQE) (force size of 16 bits)
+ * union for ramrod data for Ethernet protocol (CQE) (force size of 16 bits)
  */
 union eth_ramrod_data {
 	struct ramrod_data general;
@@ -2330,7 +2330,7 @@ struct spe_hdr {
 };
 
 /*
- * ethernet slow path element
+ * Ethernet slow path element
  */
 union eth_specific_data {
 	u8 protocol_data[8];
@@ -2343,7 +2343,7 @@ union eth_specific_data {
 };
 
 /*
- * ethernet slow path element
+ * Ethernet slow path element
  */
 struct eth_spe {
 	struct spe_hdr hdr;
@@ -2615,7 +2615,7 @@ struct tstorm_eth_rx_producers {
 
 
 /*
- * common flag to indicate existance of TPA.
+ * common flag to indicate existence of TPA.
  */
 struct tstorm_eth_tpa_exist {
 #if defined(__BIG_ENDIAN)
@@ -2765,7 +2765,7 @@ struct tstorm_common_stats {
 };
 
 /*
- * Eth statistics query sturcture for the eth_stats_quesry ramrod
+ * Eth statistics query structure for the eth_stats_query ramrod
  */
 struct eth_stats_query {
 	struct xstorm_common_stats xstorm_common;
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index 4c7750789b6..130927cfc75 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -72,26 +72,26 @@
 
 
 struct raw_op {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 	u32 raw_data;
 };
 
 struct op_read {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 	u32 pad;
 };
 
 struct op_write {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 	u32 val;
 };
 
 struct op_string_write {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 #ifdef __LITTLE_ENDIAN
 	u16 data_off;
 	u16 data_len;
@@ -102,8 +102,8 @@ struct op_string_write {
 };
 
 struct op_zero {
-	u32 op		:8;
-	u32 offset	:24;
+	u32 op:8;
+	u32 offset:24;
 	u32 len;
 };
 
@@ -208,7 +208,7 @@ static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data,
 /*********************************************************
    There are different blobs for each PRAM section.
    In addition, each blob write operation is divided into a few operations
-   in order to decrease the amount of phys. contigious buffer needed.
+   in order to decrease the amount of phys. contiguous buffer needed.
    Thus, when we select a blob the address may be with some offset
    from the beginning of PRAM section.
    The same holds for the INT_TABLE sections.
@@ -336,7 +336,7 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end)
 		len = op->str_wr.data_len;
 		data = data_base + op->str_wr.data_off;
 
-		/* carefull! it must be in order */
+		/* careful! it must be in order */
 		if (unlikely(op_type > OP_WB)) {
 
 			/* If E1 only */
@@ -740,7 +740,7 @@ static u8 calc_crc8(u32 data, u8 crc)
 	return crc_res;
 }
 
-/* regiesers addresses are not in order
+/* registers addresses are not in order
    so these arrays help simplify the code */
 static const int cm_start[E1H_FUNC_MAX][9] = {
 	{MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START,
diff --git a/drivers/net/bnx2x_init_values.h b/drivers/net/bnx2x_init_values.h
index 63019055e4b..9755bf6b08d 100644
--- a/drivers/net/bnx2x_init_values.h
+++ b/drivers/net/bnx2x_init_values.h
@@ -901,31 +901,28 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3760, 0x4},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1e20, 0x42},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3738, 0x9},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3000, 0x400},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b68, 0x2},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x3738 + 0x24, 0x10293},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x2c00, 0x2},
+	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x4b68 + 0x8, 0x20278},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3180, 0x42},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2c00 + 0x8, 0x20278},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b10, 0x2},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5000, 0x400},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b68, 0x2},
+	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2830, 0x2027a},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4000, 0x2},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x4b68 + 0x8, 0x2027a},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x4000 + 0x8, 0x20294},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b10, 0x2},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b68, 0x2},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x2830, 0x2027c},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x6b68 + 0x8, 0x20296},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b10, 0x2},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x74c0, 0x20298},
 	{OP_WR, USEM_REG_FAST_MEMORY + 0x10800, 0x1000000},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c00, 0x10027e},
+	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c00, 0x10027c},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x10c00, 0x10029a},
 	{OP_WR, USEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c40, 0x10028e},
+	{OP_SW_E1, USEM_REG_FAST_MEMORY + 0x10c40, 0x10028c},
 	{OP_SW_E1H, USEM_REG_FAST_MEMORY + 0x10c40, 0x1002aa},
 	{OP_ZP_E1, USEM_REG_INT_TABLE, 0xc20000},
 	{OP_ZP_E1H, USEM_REG_INT_TABLE, 0xc40000},
-	{OP_WR_64_E1, USEM_REG_INT_TABLE + 0x368, 0x13029e},
+	{OP_WR_64_E1, USEM_REG_INT_TABLE + 0x368, 0x13029c},
 	{OP_WR_64_E1H, USEM_REG_INT_TABLE + 0x368, 0x1302ba},
 	{OP_ZP_E1, USEM_REG_PRAM, 0x311c0000},
 	{OP_ZP_E1H, USEM_REG_PRAM, 0x31070000},
@@ -933,11 +930,11 @@ static const struct raw_op init_ops[] = {
 	{OP_ZP_E1H, USEM_REG_PRAM + 0x8000, 0x330e0c42},
 	{OP_ZP_E1, USEM_REG_PRAM + 0x10000, 0x38561919},
 	{OP_ZP_E1H, USEM_REG_PRAM + 0x10000, 0x389b1906},
-	{OP_WR_64_E1, USEM_REG_PRAM + 0x17fe0, 0x500402a0},
+	{OP_WR_64_E1, USEM_REG_PRAM + 0x17fe0, 0x5004029e},
 	{OP_ZP_E1H, USEM_REG_PRAM + 0x18000, 0x132272d},
 	{OP_WR_64_E1H, USEM_REG_PRAM + 0x18250, 0x4fb602bc},
-#define USEM_COMMON_END         790
-#define USEM_PORT0_START        790
+#define USEM_COMMON_END         787
+#define USEM_PORT0_START        787
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1400, 0xa0},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9000, 0xa0},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1900, 0xa},
@@ -950,44 +947,27 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3288, 0x96},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5440, 0x72},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5000, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3000, 0x20},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b78, 0x52},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5100, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3100, 0x20},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e08, 0xc},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5200, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3200, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5300, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3300, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5400, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3400, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5500, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3500, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5600, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3600, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5700, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3700, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5800, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3800, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5900, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3900, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5a00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3a00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5b00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3b00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5c00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3c00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5d00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3d00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5e00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3e00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5f00, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3f00, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6b78, 0x52},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x2c10, 0x2},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6e08, 0xc},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4b78, 0x52},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e08, 0xc},
-#define USEM_PORT0_END          838
-#define USEM_PORT1_START        838
+#define USEM_PORT0_END          818
+#define USEM_PORT1_START        818
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1680, 0xa0},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x9280, 0xa0},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x1928, 0xa},
@@ -1000,76 +980,59 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x34e0, 0x96},
 	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x5608, 0x72},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5080, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3080, 0x20},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4cc0, 0x52},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5180, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3180, 0x20},
+	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e38, 0xc},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5280, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3280, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5380, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3380, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5480, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3480, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5580, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3580, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5680, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3680, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5780, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3780, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5880, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3880, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5980, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3980, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5a80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3a80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5b80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3b80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5c80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3c80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5d80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3d80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5e80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3e80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x5f80, 0x20},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x3f80, 0x20},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6cc0, 0x52},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x2c20, 0x2},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x6e38, 0xc},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4cc0, 0x52},
-	{OP_ZR_E1, USEM_REG_FAST_MEMORY + 0x4e38, 0xc},
-#define USEM_PORT1_END          886
-#define USEM_FUNC0_START        886
+#define USEM_PORT1_END          849
+#define USEM_FUNC0_START        849
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3000, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4010, 0x2},
-#define USEM_FUNC0_END          888
-#define USEM_FUNC1_START        888
+#define USEM_FUNC0_END          851
+#define USEM_FUNC1_START        851
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3010, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4020, 0x2},
-#define USEM_FUNC1_END          890
-#define USEM_FUNC2_START        890
+#define USEM_FUNC1_END          853
+#define USEM_FUNC2_START        853
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3020, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4030, 0x2},
-#define USEM_FUNC2_END          892
-#define USEM_FUNC3_START        892
+#define USEM_FUNC2_END          855
+#define USEM_FUNC3_START        855
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3030, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4040, 0x2},
-#define USEM_FUNC3_END          894
-#define USEM_FUNC4_START        894
+#define USEM_FUNC3_END          857
+#define USEM_FUNC4_START        857
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3040, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4050, 0x2},
-#define USEM_FUNC4_END          896
-#define USEM_FUNC5_START        896
+#define USEM_FUNC4_END          859
+#define USEM_FUNC5_START        859
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3050, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4060, 0x2},
-#define USEM_FUNC5_END          898
-#define USEM_FUNC6_START        898
+#define USEM_FUNC5_END          861
+#define USEM_FUNC6_START        861
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3060, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4070, 0x2},
-#define USEM_FUNC6_END          900
-#define USEM_FUNC7_START        900
+#define USEM_FUNC6_END          863
+#define USEM_FUNC7_START        863
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x3070, 0x4},
 	{OP_ZR_E1H, USEM_REG_FAST_MEMORY + 0x4080, 0x2},
-#define USEM_FUNC7_END          902
-#define CSEM_COMMON_START       902
+#define USEM_FUNC7_END          865
+#define CSEM_COMMON_START       865
 	{OP_RD, CSEM_REG_MSG_NUM_FIC0, 0x0},
 	{OP_RD, CSEM_REG_MSG_NUM_FIC1, 0x0},
 	{OP_RD, CSEM_REG_MSG_NUM_FOC0, 0x0},
@@ -1128,29 +1091,29 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x11e8, 0x0},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x25c0, 0x240},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3000, 0xc0},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x2ec8, 0x802a2},
+	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x2ec8, 0x802a0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x4070, 0x80},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x5280, 0x4},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6280, 0x240},
 	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x6b88, 0x2002be},
 	{OP_WR, CSEM_REG_FAST_MEMORY + 0x10800, 0x13fffff},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002aa},
+	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002a8},
 	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x10c00, 0x1002de},
 	{OP_WR, CSEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002ba},
+	{OP_SW_E1, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002b8},
 	{OP_SW_E1H, CSEM_REG_FAST_MEMORY + 0x10c40, 0x1002ee},
 	{OP_ZP_E1, CSEM_REG_INT_TABLE, 0x6e0000},
 	{OP_ZP_E1H, CSEM_REG_INT_TABLE, 0x6f0000},
-	{OP_WR_64_E1, CSEM_REG_INT_TABLE + 0x380, 0x1002ca},
+	{OP_WR_64_E1, CSEM_REG_INT_TABLE + 0x380, 0x1002c8},
 	{OP_WR_64_E1H, CSEM_REG_INT_TABLE + 0x380, 0x1002fe},
 	{OP_ZP_E1, CSEM_REG_PRAM, 0x32580000},
 	{OP_ZP_E1H, CSEM_REG_PRAM, 0x31fa0000},
 	{OP_ZP_E1, CSEM_REG_PRAM + 0x8000, 0x18270c96},
 	{OP_ZP_E1H, CSEM_REG_PRAM + 0x8000, 0x19040c7f},
-	{OP_WR_64_E1, CSEM_REG_PRAM + 0xb210, 0x682402cc},
+	{OP_WR_64_E1, CSEM_REG_PRAM + 0xb210, 0x682402ca},
 	{OP_WR_64_E1H, CSEM_REG_PRAM + 0xb430, 0x67e00300},
-#define CSEM_COMMON_END         981
-#define CSEM_PORT0_START        981
+#define CSEM_COMMON_END         944
+#define CSEM_PORT0_START        944
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1400, 0xa0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8000, 0xa0},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1900, 0x10},
@@ -1163,8 +1126,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6040, 0x30},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3040, 0x6},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x2410, 0x30},
-#define CSEM_PORT0_END          993
-#define CSEM_PORT1_START        993
+#define CSEM_PORT0_END          956
+#define CSEM_PORT1_START        956
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1680, 0xa0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x8280, 0xa0},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x1940, 0x10},
@@ -1177,43 +1140,43 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x6100, 0x30},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x3058, 0x6},
 	{OP_ZR_E1, CSEM_REG_FAST_MEMORY + 0x24d0, 0x30},
-#define CSEM_PORT1_END          1005
-#define CSEM_FUNC0_START        1005
+#define CSEM_PORT1_END          968
+#define CSEM_FUNC0_START        968
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1148, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3300, 0x2},
-#define CSEM_FUNC0_END          1007
-#define CSEM_FUNC1_START        1007
+#define CSEM_FUNC0_END          970
+#define CSEM_FUNC1_START        970
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x114c, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3308, 0x2},
-#define CSEM_FUNC1_END          1009
-#define CSEM_FUNC2_START        1009
+#define CSEM_FUNC1_END          972
+#define CSEM_FUNC2_START        972
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1150, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3310, 0x2},
-#define CSEM_FUNC2_END          1011
-#define CSEM_FUNC3_START        1011
+#define CSEM_FUNC2_END          974
+#define CSEM_FUNC3_START        974
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1154, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3318, 0x2},
-#define CSEM_FUNC3_END          1013
-#define CSEM_FUNC4_START        1013
+#define CSEM_FUNC3_END          976
+#define CSEM_FUNC4_START        976
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1158, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3320, 0x2},
-#define CSEM_FUNC4_END          1015
-#define CSEM_FUNC5_START        1015
+#define CSEM_FUNC4_END          978
+#define CSEM_FUNC5_START        978
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x115c, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3328, 0x2},
-#define CSEM_FUNC5_END          1017
-#define CSEM_FUNC6_START        1017
+#define CSEM_FUNC5_END          980
+#define CSEM_FUNC6_START        980
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1160, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3330, 0x2},
-#define CSEM_FUNC6_END          1019
-#define CSEM_FUNC7_START        1019
+#define CSEM_FUNC6_END          982
+#define CSEM_FUNC7_START        982
 	{OP_WR_E1H, CSEM_REG_FAST_MEMORY + 0x1164, 0x0},
 	{OP_ZR_E1H, CSEM_REG_FAST_MEMORY + 0x3338, 0x2},
-#define CSEM_FUNC7_END          1021
-#define XPB_COMMON_START        1021
+#define CSEM_FUNC7_END          984
+#define XPB_COMMON_START        984
 	{OP_WR, GRCBASE_XPB + PB_REG_CONTROL, 0x20},
-#define XPB_COMMON_END          1022
-#define DQ_COMMON_START         1022
+#define XPB_COMMON_END          985
+#define DQ_COMMON_START         985
 	{OP_WR, DORQ_REG_MODE_ACT, 0x2},
 	{OP_WR, DORQ_REG_NORM_CID_OFST, 0x3},
 	{OP_WR, DORQ_REG_OUTST_REQ, 0x4},
@@ -1232,8 +1195,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR, DORQ_REG_DQ_FIFO_AFULL_TH, 0x76c},
 	{OP_WR, DORQ_REG_REGN, 0x7c1004},
 	{OP_WR, DORQ_REG_IF_EN, 0xf},
-#define DQ_COMMON_END           1040
-#define TIMERS_COMMON_START     1040
+#define DQ_COMMON_END           1003
+#define TIMERS_COMMON_START     1003
 	{OP_ZR, TM_REG_CLIN_PRIOR0_CLIENT, 0x2},
 	{OP_WR, TM_REG_LIN_SETCLR_FIFO_ALFULL_THR, 0x1c},
 	{OP_WR, TM_REG_CFC_AC_CRDCNT_VAL, 0x1},
@@ -1256,14 +1219,14 @@ static const struct raw_op init_ops[] = {
 	{OP_WR, TM_REG_EN_CL0_INPUT, 0x1},
 	{OP_WR, TM_REG_EN_CL1_INPUT, 0x1},
 	{OP_WR, TM_REG_EN_CL2_INPUT, 0x1},
-#define TIMERS_COMMON_END       1062
-#define TIMERS_PORT0_START      1062
+#define TIMERS_COMMON_END       1025
+#define TIMERS_PORT0_START      1025
 	{OP_ZR, TM_REG_LIN0_PHY_ADDR, 0x2},
-#define TIMERS_PORT0_END        1063
-#define TIMERS_PORT1_START      1063
+#define TIMERS_PORT0_END        1026
+#define TIMERS_PORT1_START      1026
 	{OP_ZR, TM_REG_LIN1_PHY_ADDR, 0x2},
-#define TIMERS_PORT1_END        1064
-#define XSDM_COMMON_START       1064
+#define TIMERS_PORT1_END        1027
+#define XSDM_COMMON_START       1027
 	{OP_WR_E1, XSDM_REG_CFC_RSP_START_ADDR, 0x614},
 	{OP_WR_E1H, XSDM_REG_CFC_RSP_START_ADDR, 0x424},
 	{OP_WR_E1, XSDM_REG_CMP_COUNTER_START_ADDR, 0x600},
@@ -1311,8 +1274,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_ASIC, XSDM_REG_TIMER_TICK, 0x3e8},
 	{OP_WR_EMUL, XSDM_REG_TIMER_TICK, 0x1},
 	{OP_WR_FPGA, XSDM_REG_TIMER_TICK, 0xa},
-#define XSDM_COMMON_END         1111
-#define QM_COMMON_START         1111
+#define XSDM_COMMON_END         1074
+#define QM_COMMON_START         1074
 	{OP_WR, QM_REG_ACTCTRINITVAL_0, 0x6},
 	{OP_WR, QM_REG_ACTCTRINITVAL_1, 0x5},
 	{OP_WR, QM_REG_ACTCTRINITVAL_2, 0xa},
@@ -1613,8 +1576,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_6, 0x5},
 	{OP_WR_E1H, QM_REG_PQ2PCIFUNC_7, 0x7},
 	{OP_WR, QM_REG_CMINTEN, 0xff},
-#define QM_COMMON_END           1411
-#define PBF_COMMON_START        1411
+#define QM_COMMON_END           1374
+#define PBF_COMMON_START        1374
 	{OP_WR, PBF_REG_INIT, 0x1},
 	{OP_WR, PBF_REG_INIT_P4, 0x1},
 	{OP_WR, PBF_REG_MAC_LB_ENABLE, 0x1},
@@ -1622,20 +1585,20 @@ static const struct raw_op init_ops[] = {
 	{OP_WR, PBF_REG_INIT_P4, 0x0},
 	{OP_WR, PBF_REG_INIT, 0x0},
 	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P4, 0x0},
-#define PBF_COMMON_END          1418
-#define PBF_PORT0_START         1418
+#define PBF_COMMON_END          1381
+#define PBF_PORT0_START         1381
 	{OP_WR, PBF_REG_INIT_P0, 0x1},
 	{OP_WR, PBF_REG_MAC_IF0_ENABLE, 0x1},
 	{OP_WR, PBF_REG_INIT_P0, 0x0},
 	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P0, 0x0},
-#define PBF_PORT0_END           1422
-#define PBF_PORT1_START         1422
+#define PBF_PORT0_END           1385
+#define PBF_PORT1_START         1385
 	{OP_WR, PBF_REG_INIT_P1, 0x1},
 	{OP_WR, PBF_REG_MAC_IF1_ENABLE, 0x1},
 	{OP_WR, PBF_REG_INIT_P1, 0x0},
 	{OP_WR, PBF_REG_DISABLE_NEW_TASK_PROC_P1, 0x0},
-#define PBF_PORT1_END           1426
-#define XCM_COMMON_START        1426
+#define PBF_PORT1_END           1389
+#define XCM_COMMON_START        1389
 	{OP_WR, XCM_REG_XX_OVFL_EVNT_ID, 0x32},
 	{OP_WR, XCM_REG_XQM_XCM_HDR_P, 0x3150020},
 	{OP_WR, XCM_REG_XQM_XCM_HDR_S, 0x3150020},
@@ -1670,7 +1633,7 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, XCM_REG_XX_MSG_NUM, 0x1f},
 	{OP_WR_E1H, XCM_REG_XX_MSG_NUM, 0x20},
 	{OP_ZR, XCM_REG_XX_TABLE, 0x12},
-	{OP_SW_E1, XCM_REG_XX_DESCR_TABLE, 0x1f02ce},
+	{OP_SW_E1, XCM_REG_XX_DESCR_TABLE, 0x1f02cc},
 	{OP_SW_E1H, XCM_REG_XX_DESCR_TABLE, 0x1f0302},
 	{OP_WR, XCM_REG_N_SM_CTX_LD_0, 0xf},
 	{OP_WR, XCM_REG_N_SM_CTX_LD_1, 0x7},
@@ -1700,8 +1663,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR, XCM_REG_CDU_SM_WR_IFEN, 0x1},
 	{OP_WR, XCM_REG_CDU_SM_RD_IFEN, 0x1},
 	{OP_WR, XCM_REG_XCM_CFC_IFEN, 0x1},
-#define XCM_COMMON_END          1490
-#define XCM_PORT0_START         1490
+#define XCM_COMMON_END          1453
+#define XCM_PORT0_START         1453
 	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1710,8 +1673,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD10, 0x2},
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
-#define XCM_PORT0_END           1498
-#define XCM_PORT1_START         1498
+#define XCM_PORT0_END           1461
+#define XCM_PORT1_START         1461
 	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1720,8 +1683,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_CMD11, 0x2},
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
-#define XCM_PORT1_END           1506
-#define XCM_FUNC0_START         1506
+#define XCM_PORT1_END           1469
+#define XCM_FUNC0_START         1469
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1731,8 +1694,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC0_END           1515
-#define XCM_FUNC1_START         1515
+#define XCM_FUNC0_END           1478
+#define XCM_FUNC1_START         1478
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1742,8 +1705,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC1_END           1524
-#define XCM_FUNC2_START         1524
+#define XCM_FUNC1_END           1487
+#define XCM_FUNC2_START         1487
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1753,8 +1716,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC2_END           1533
-#define XCM_FUNC3_START         1533
+#define XCM_FUNC2_END           1496
+#define XCM_FUNC3_START         1496
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1764,8 +1727,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC3_END           1542
-#define XCM_FUNC4_START         1542
+#define XCM_FUNC3_END           1505
+#define XCM_FUNC4_START         1505
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1775,8 +1738,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC4_END           1551
-#define XCM_FUNC5_START         1551
+#define XCM_FUNC4_END           1514
+#define XCM_FUNC5_START         1514
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1786,8 +1749,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC5_END           1560
-#define XCM_FUNC6_START         1560
+#define XCM_FUNC5_END           1523
+#define XCM_FUNC6_START         1523
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_0, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_0, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00, 0x0},
@@ -1797,8 +1760,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL00, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL10, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_0, 0x0},
-#define XCM_FUNC6_END           1569
-#define XCM_FUNC7_START         1569
+#define XCM_FUNC6_END           1532
+#define XCM_FUNC7_START         1532
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_TMR_VAL_1, 0xc8},
 	{OP_WR_E1H, XCM_REG_GLB_DEL_ACK_MAX_CNT_1, 0x2},
 	{OP_WR_E1H, XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01, 0x0},
@@ -1808,8 +1771,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL01, 0xff},
 	{OP_WR_E1H, XCM_REG_WU_DA_CNT_UPD_VAL11, 0xff},
 	{OP_WR_E1H, XCM_REG_PHYS_QNUM3_1, 0x0},
-#define XCM_FUNC7_END           1578
-#define XSEM_COMMON_START       1578
+#define XCM_FUNC7_END           1541
+#define XSEM_COMMON_START       1541
 	{OP_RD, XSEM_REG_MSG_NUM_FIC0, 0x0},
 	{OP_RD, XSEM_REG_MSG_NUM_FIC1, 0x0},
 	{OP_RD, XSEM_REG_MSG_NUM_FOC0, 0x0},
@@ -1876,9 +1839,9 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x9000, 0x2},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3368, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x21a8, 0x86},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3370, 0x202ed},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3370, 0x202eb},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2000, 0x20},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3b90, 0x402ef},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3b90, 0x402ed},
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x23c8, 0x0},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1518, 0x1},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x23d0, 0x20321},
@@ -1886,29 +1849,29 @@ static const struct raw_op init_ops[] = {
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2498, 0x40323},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1838, 0x0},
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x2ac8, 0x0},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1820, 0x202f3},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1820, 0x202f1},
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x2ab8, 0x0},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4ac0, 0x2},
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0x3010, 0x1},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4b00, 0x4},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x4040, 0x10},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1f50, 0x202f5},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x1f50, 0x202f3},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x4000, 0x100327},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6ac0, 0x2},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6b00, 0x4},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x83b0, 0x20337},
 	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x0},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c00, 0x1002f7},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c00, 0x1002f5},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c00, 0x100339},
 	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x1000000},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80307},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80305},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c40, 0x80349},
 	{OP_WR, XSEM_REG_FAST_MEMORY + 0x10800, 0x2000000},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c60, 0x8030f},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x10c60, 0x8030d},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x10c60, 0x80351},
 	{OP_ZP_E1, XSEM_REG_INT_TABLE, 0xa90000},
 	{OP_ZP_E1H, XSEM_REG_INT_TABLE, 0xac0000},
-	{OP_WR_64_E1, XSEM_REG_INT_TABLE + 0x368, 0x130317},
+	{OP_WR_64_E1, XSEM_REG_INT_TABLE + 0x368, 0x130315},
 	{OP_WR_64_E1H, XSEM_REG_INT_TABLE + 0x368, 0x130359},
 	{OP_ZP_E1, XSEM_REG_PRAM, 0x344e0000},
 	{OP_ZP_E1H, XSEM_REG_PRAM, 0x34620000},
@@ -1918,10 +1881,10 @@ static const struct raw_op init_ops[] = {
 	{OP_ZP_E1H, XSEM_REG_PRAM + 0x10000, 0x3e971b22},
 	{OP_ZP_E1, XSEM_REG_PRAM + 0x18000, 0x1dd02ad2},
 	{OP_ZP_E1H, XSEM_REG_PRAM + 0x18000, 0x21542ac8},
-	{OP_WR_64_E1, XSEM_REG_PRAM + 0x1c0d0, 0x47e60319},
+	{OP_WR_64_E1, XSEM_REG_PRAM + 0x1c0d0, 0x47e60317},
 	{OP_WR_64_E1H, XSEM_REG_PRAM + 0x1c8d0, 0x46e6035b},
-#define XSEM_COMMON_END         1688
-#define XSEM_PORT0_START        1688
+#define XSEM_COMMON_END         1651
+#define XSEM_PORT0_START        1651
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3ba0, 0x10},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xc000, 0xfc},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3c20, 0x1c},
@@ -1934,7 +1897,7 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x26e8, 0x1c},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3b58, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x27c8, 0x1c},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d10, 0x10031b},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d10, 0x100319},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa000, 0x28},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1500, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa140, 0xc},
@@ -1950,12 +1913,12 @@ static const struct raw_op init_ops[] = {
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x6ac8, 0x2035d},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x50b8, 0x1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6b10, 0x42},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ac8, 0x2032b},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ac8, 0x20329},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6d20, 0x4},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4b10, 0x42},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4d20, 0x4},
-#define XSEM_PORT0_END          1720
-#define XSEM_PORT1_START        1720
+#define XSEM_PORT0_END          1683
+#define XSEM_PORT1_START        1683
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3be0, 0x10},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xc3f0, 0xfc},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x3c90, 0x1c},
@@ -1968,7 +1931,7 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2758, 0x1c},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x3b5c, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x2838, 0x1c},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d50, 0x10032d},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x3d50, 0x10032b},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa0a0, 0x28},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x1504, 0x0},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0xa170, 0xc},
@@ -1984,65 +1947,65 @@ static const struct raw_op init_ops[] = {
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x6ad0, 0x2035f},
 	{OP_WR_E1, XSEM_REG_FAST_MEMORY + 0x50bc, 0x1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6c18, 0x42},
-	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ad0, 0x2033d},
+	{OP_SW_E1, XSEM_REG_FAST_MEMORY + 0x4ad0, 0x2033b},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x6d30, 0x4},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4c18, 0x42},
 	{OP_ZR_E1, XSEM_REG_FAST_MEMORY + 0x4d30, 0x4},
-#define XSEM_PORT1_END          1752
-#define XSEM_FUNC0_START        1752
+#define XSEM_PORT1_END          1715
+#define XSEM_FUNC0_START        1715
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e0, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x28b8, 0x100361},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5048, 0xe},
-#define XSEM_FUNC0_END          1755
-#define XSEM_FUNC1_START        1755
+#define XSEM_FUNC0_END          1718
+#define XSEM_FUNC1_START        1718
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e4, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x28f8, 0x100371},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5080, 0xe},
-#define XSEM_FUNC1_END          1758
-#define XSEM_FUNC2_START        1758
+#define XSEM_FUNC1_END          1721
+#define XSEM_FUNC2_START        1721
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7e8, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2938, 0x100381},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x50b8, 0xe},
-#define XSEM_FUNC2_END          1761
-#define XSEM_FUNC3_START        1761
+#define XSEM_FUNC2_END          1724
+#define XSEM_FUNC3_START        1724
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7ec, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2978, 0x100391},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x50f0, 0xe},
-#define XSEM_FUNC3_END          1764
-#define XSEM_FUNC4_START        1764
+#define XSEM_FUNC3_END          1727
+#define XSEM_FUNC4_START        1727
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f0, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29b8, 0x1003a1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5128, 0xe},
-#define XSEM_FUNC4_END          1767
-#define XSEM_FUNC5_START        1767
+#define XSEM_FUNC4_END          1730
+#define XSEM_FUNC5_START        1730
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f4, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x29f8, 0x1003b1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5160, 0xe},
-#define XSEM_FUNC5_END          1770
-#define XSEM_FUNC6_START        1770
+#define XSEM_FUNC5_END          1733
+#define XSEM_FUNC6_START        1733
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7f8, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2a38, 0x1003c1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x5198, 0xe},
-#define XSEM_FUNC6_END          1773
-#define XSEM_FUNC7_START        1773
+#define XSEM_FUNC6_END          1736
+#define XSEM_FUNC7_START        1736
 	{OP_WR_E1H, XSEM_REG_FAST_MEMORY + 0xc7fc, 0x0},
 	{OP_SW_E1H, XSEM_REG_FAST_MEMORY + 0x2a78, 0x1003d1},
 	{OP_ZR_E1H, XSEM_REG_FAST_MEMORY + 0x51d0, 0xe},
-#define XSEM_FUNC7_END          1776
-#define CDU_COMMON_START        1776
+#define XSEM_FUNC7_END          1739
+#define CDU_COMMON_START        1739
 	{OP_WR, CDU_REG_CDU_CONTROL0, 0x1},
 	{OP_WR_E1H, CDU_REG_MF_MODE, 0x1},
 	{OP_WR, CDU_REG_CDU_CHK_MASK0, 0x3d000},
 	{OP_WR, CDU_REG_CDU_CHK_MASK1, 0x3d},
-	{OP_WB_E1, CDU_REG_L1TT, 0x200033f},
+	{OP_WB_E1, CDU_REG_L1TT, 0x200033d},
 	{OP_WB_E1H, CDU_REG_L1TT, 0x20003e1},
-	{OP_WB_E1, CDU_REG_MATT, 0x20053f},
+	{OP_WB_E1, CDU_REG_MATT, 0x20053d},
 	{OP_WB_E1H, CDU_REG_MATT, 0x2805e1},
 	{OP_ZR_E1, CDU_REG_MATT + 0x80, 0x2},
-	{OP_WB_E1, CDU_REG_MATT + 0x88, 0x6055f},
+	{OP_WB_E1, CDU_REG_MATT + 0x88, 0x6055d},
 	{OP_ZR, CDU_REG_MATT + 0xa0, 0x18},
-#define CDU_COMMON_END          1787
-#define DMAE_COMMON_START       1787
+#define CDU_COMMON_END          1750
+#define DMAE_COMMON_START       1750
 	{OP_ZR, DMAE_REG_CMD_MEM, 0xe0},
 	{OP_WR, DMAE_REG_CRC16C_INIT, 0x0},
 	{OP_WR, DMAE_REG_CRC16T10_INIT, 0x1},
@@ -2050,24 +2013,24 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, DMAE_REG_PXP_REQ_INIT_CRD, 0x2},
 	{OP_WR, DMAE_REG_PCI_IFEN, 0x1},
 	{OP_WR, DMAE_REG_GRC_IFEN, 0x1},
-#define DMAE_COMMON_END         1794
-#define PXP_COMMON_START        1794
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x400, 0x50565},
+#define DMAE_COMMON_END         1757
+#define PXP_COMMON_START        1757
+	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x400, 0x50563},
 	{OP_WB_E1H, PXP_REG_HST_INBOUND_INT + 0x400, 0x50609},
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x420, 0x5056a},
+	{OP_WB_E1, PXP_REG_HST_INBOUND_INT + 0x420, 0x50568},
 	{OP_WB_E1H, PXP_REG_HST_INBOUND_INT, 0x5060e},
-	{OP_WB_E1, PXP_REG_HST_INBOUND_INT, 0x5056f},
-#define PXP_COMMON_END          1799
-#define CFC_COMMON_START        1799
+	{OP_WB_E1, PXP_REG_HST_INBOUND_INT, 0x5056d},
+#define PXP_COMMON_END          1762
+#define CFC_COMMON_START        1762
 	{OP_ZR_E1H, CFC_REG_LINK_LIST, 0x100},
 	{OP_WR, CFC_REG_CONTROL0, 0x10},
 	{OP_WR, CFC_REG_DISABLE_ON_ERROR, 0x3fff},
 	{OP_WR, CFC_REG_LCREQ_WEIGHTS, 0x84924a},
-#define CFC_COMMON_END          1803
-#define HC_COMMON_START         1803
+#define CFC_COMMON_END          1766
+#define HC_COMMON_START         1766
 	{OP_ZR_E1, HC_REG_USTORM_ADDR_FOR_COALESCE, 0x4},
-#define HC_COMMON_END           1804
-#define HC_PORT0_START          1804
+#define HC_COMMON_END           1767
+#define HC_PORT0_START          1767
 	{OP_WR_E1, HC_REG_CONFIG_0, 0x1080},
 	{OP_ZR_E1, HC_REG_UC_RAM_ADDR_0, 0x2},
 	{OP_WR_E1, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2086,8 +2049,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_PORT0_END            1822
-#define HC_PORT1_START          1822
+#define HC_PORT0_END            1785
+#define HC_PORT1_START          1785
 	{OP_WR_E1, HC_REG_CONFIG_1, 0x1080},
 	{OP_ZR_E1, HC_REG_UC_RAM_ADDR_1, 0x2},
 	{OP_WR_E1, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2106,8 +2069,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_PORT1_END            1840
-#define HC_FUNC0_START          1840
+#define HC_PORT1_END            1803
+#define HC_FUNC0_START          1803
 	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x0},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2123,8 +2086,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC0_END            1855
-#define HC_FUNC1_START          1855
+#define HC_FUNC0_END            1818
+#define HC_FUNC1_START          1818
 	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x1},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2140,8 +2103,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC1_END            1870
-#define HC_FUNC2_START          1870
+#define HC_FUNC1_END            1833
+#define HC_FUNC2_START          1833
 	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x2},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2157,8 +2120,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC2_END            1885
-#define HC_FUNC3_START          1885
+#define HC_FUNC2_END            1848
+#define HC_FUNC3_START          1848
 	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x3},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2174,8 +2137,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC3_END            1900
-#define HC_FUNC4_START          1900
+#define HC_FUNC3_END            1863
+#define HC_FUNC4_START          1863
 	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x4},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2191,8 +2154,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC4_END            1915
-#define HC_FUNC5_START          1915
+#define HC_FUNC4_END            1878
+#define HC_FUNC5_START          1878
 	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x5},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2208,8 +2171,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC5_END            1930
-#define HC_FUNC6_START          1930
+#define HC_FUNC5_END            1893
+#define HC_FUNC6_START          1893
 	{OP_WR_E1H, HC_REG_CONFIG_0, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P0, 0x6},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P0, 0x10},
@@ -2225,8 +2188,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x120, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x370, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x5c0, 0x4a},
-#define HC_FUNC6_END            1945
-#define HC_FUNC7_START          1945
+#define HC_FUNC6_END            1908
+#define HC_FUNC7_START          1908
 	{OP_WR_E1H, HC_REG_CONFIG_1, 0x1080},
 	{OP_WR_E1H, HC_REG_FUNC_NUM_P1, 0x7},
 	{OP_WR_E1H, HC_REG_ATTN_NUM_P1, 0x10},
@@ -2242,8 +2205,8 @@ static const struct raw_op init_ops[] = {
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x248, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x498, 0x4a},
 	{OP_ZR_E1H, HC_REG_STATISTIC_COUNTERS + 0x6e8, 0x4a},
-#define HC_FUNC7_END            1960
-#define PXP2_COMMON_START       1960
+#define HC_FUNC7_END            1923
+#define PXP2_COMMON_START       1923
 	{OP_WR_E1, PXP2_REG_PGL_CONTROL0, 0xe38340},
 	{OP_WR_E1H, PXP2_REG_RQ_DRAM_ALIGN, 0x1},
 	{OP_WR, PXP2_REG_PGL_CONTROL1, 0x3c10},
@@ -2361,8 +2324,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, PXP2_REG_RQ_ILT_MODE, 0x1},
 	{OP_WR, PXP2_REG_RQ_RBC_DONE, 0x1},
 	{OP_WR_E1H, PXP2_REG_PGL_CONTROL0, 0xe38340},
-#define PXP2_COMMON_END         2077
-#define MISC_AEU_COMMON_START   2077
+#define PXP2_COMMON_END         2040
+#define MISC_AEU_COMMON_START   2040
 	{OP_ZR, MISC_REG_AEU_GENERAL_ATTN_0, 0x16},
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_NIG_0, 0x55540000},
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE2_NIG_0, 0x55555555},
@@ -2382,8 +2345,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE4_PXP_1, 0x0},
 	{OP_WR_E1H, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0xc00},
 	{OP_WR_E1H, MISC_REG_AEU_GENERAL_MASK, 0x3},
-#define MISC_AEU_COMMON_END     2096
-#define MISC_AEU_PORT0_START    2096
+#define MISC_AEU_COMMON_END     2059
+#define MISC_AEU_PORT0_START    2059
 	{OP_WR_E1, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, 0xbf5c0000},
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, 0xff5c0000},
 	{OP_WR_E1, MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0, 0xfff51fef},
@@ -2416,8 +2379,8 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, MISC_REG_AEU_INVERTER_1_FUNC_0, 0x0},
 	{OP_ZR_E1, MISC_REG_AEU_INVERTER_2_FUNC_0, 0x3},
 	{OP_WR_E1, MISC_REG_AEU_MASK_ATTN_FUNC_0, 0x7},
-#define MISC_AEU_PORT0_END      2128
-#define MISC_AEU_PORT1_START    2128
+#define MISC_AEU_PORT0_END      2091
+#define MISC_AEU_PORT1_START    2091
 	{OP_WR_E1, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0, 0xbf5c0000},
 	{OP_WR_E1H, MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0, 0xff5c0000},
 	{OP_WR_E1, MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0, 0xfff51fef},
@@ -2450,7 +2413,7 @@ static const struct raw_op init_ops[] = {
 	{OP_WR_E1, MISC_REG_AEU_INVERTER_1_FUNC_1, 0x0},
 	{OP_ZR_E1, MISC_REG_AEU_INVERTER_2_FUNC_1, 0x3},
 	{OP_WR_E1, MISC_REG_AEU_MASK_ATTN_FUNC_1, 0x7},
-#define MISC_AEU_PORT1_END      2160
+#define MISC_AEU_PORT1_END      2123
 
 };
 
@@ -2560,103 +2523,92 @@ static const u32 init_data_e1[] = {
 	0x00049c00, 0x00051f80, 0x0005a300, 0x00062680, 0x0006aa00, 0x00072d80,
 	0x0007b100, 0x00083480, 0x0008b800, 0x00093b80, 0x0009bf00, 0x000a4280,
 	0x000ac600, 0x000b4980, 0x000bcd00, 0x000c5080, 0x000cd400, 0x000d5780,
-	0x000ddb00, 0x00001900, 0x00000028, 0x00000000, 0x00100000, 0x00000000,
-	0x00000000, 0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
+	0x000ddb00, 0x00001900, 0x00100000, 0x00000000, 0x00000000, 0xffffffff,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8,
-	0x00000000, 0x00001500, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
+	0x40000000, 0x40000000, 0x00000000, 0x00007ff8, 0x00000000, 0x00001500,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x00000000, 0x00007ff8, 0x00000000, 0x00003500, 0x00001000, 0x00002080,
-	0x00003100, 0x00004180, 0x00005200, 0x00006280, 0x00007300, 0x00008380,
-	0x00009400, 0x0000a480, 0x0000b500, 0x0000c580, 0x0000d600, 0x0000e680,
-	0x0000f700, 0x00010780, 0x00011800, 0x00012880, 0x00013900, 0x00014980,
-	0x00015a00, 0x00016a80, 0x00017b00, 0x00018b80, 0x00019c00, 0x0001ac80,
-	0x0001bd00, 0x0001cd80, 0x0001de00, 0x0001ee80, 0x0001ff00, 0x00000000,
-	0x00010001, 0x00000604, 0xccccccc1, 0xffffffff, 0xffffffff, 0xcccc0201,
-	0xcccccccc, 0x00000000, 0xffffffff, 0x40000000, 0x40000000, 0x40000000,
+	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8,
+	0x00000000, 0x00003500, 0x00001000, 0x00002080, 0x00003100, 0x00004180,
+	0x00005200, 0x00006280, 0x00007300, 0x00008380, 0x00009400, 0x0000a480,
+	0x0000b500, 0x0000c580, 0x0000d600, 0x0000e680, 0x0000f700, 0x00010780,
+	0x00011800, 0x00012880, 0x00013900, 0x00014980, 0x00015a00, 0x00016a80,
+	0x00017b00, 0x00018b80, 0x00019c00, 0x0001ac80, 0x0001bd00, 0x0001cd80,
+	0x0001de00, 0x0001ee80, 0x0001ff00, 0x00000000, 0x00010001, 0x00000604,
+	0xccccccc1, 0xffffffff, 0xffffffff, 0xcccc0201, 0xcccccccc, 0x00000000,
+	0xffffffff, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
 	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000,
-	0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x40000000, 0x00000000,
-	0x00007ff8, 0x00000000, 0x00003500, 0x0000ffff, 0x00000000, 0x0000ffff,
+	0x40000000, 0x40000000, 0x40000000, 0x00000000, 0x00007ff8, 0x00000000,
+	0x00003500, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
 	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
+	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x00100000,
 	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x00100000, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
 	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff,
-	0x00000000, 0x00100000, 0x00000000, 0xfffffff3, 0x320fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1,
-	0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c,
-	0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305,
-	0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2,
-	0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c,
-	0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xfffffff7, 0x31efffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5,
-	0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c,
-	0xcdcdcdcd, 0xfffffff3, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c,
+	0x00000000, 0x0000ffff, 0x00000000, 0x0000ffff, 0x00000000, 0x00100000,
+	0x00000000, 0xfffffff3, 0x320fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x30efffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6,
 	0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c,
 	0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014,
 	0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa,
 	0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c,
-	0xcdcdcdcd, 0xfffffff7, 0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x304fffff, 0x0c30c30c,
+	0xcdcdcdcd, 0xfffffff7, 0x31efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x302fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3,
-	0x31efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
+	0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
 	0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
 	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406,
 	0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c,
 	0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
 	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97,
-	0x056fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c,
-	0xcdcdcdcd, 0xfffffff5, 0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x320fffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xfffffff7,
+	0x30efffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0020cf3c,
+	0xcdcdcdcd, 0xfffffff5, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3, 0x31efffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1,
 	0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c,
 	0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
 	0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305,
 	0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2,
 	0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c,
-	0xcdcdcdcd, 0xffffff8a, 0x042fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
-	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x05cfffff, 0x0c30c30c,
+	0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97, 0x056fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5,
 	0x310fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c,
-	0xcdcdcdcd, 0xfffffff3, 0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
-	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x300fffff, 0x0c30c30c,
+	0xcdcdcdcd, 0xfffffff3, 0x320fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xfffffff1, 0x310fffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6,
 	0x305fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c,
 	0xcdcdcdcd, 0xfffff406, 0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014,
 	0xf3cf3cf3, 0x0004cf3c, 0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa,
-	0x302fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c,
-	0xcdcdcdcd, 0xffffff97, 0x040fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
-	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x300fffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
-	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff,
-	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c,
-	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffff8a,
+	0x042fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0010cf3c,
+	0xcdcdcdcd, 0xffffff97, 0x05cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000,
+	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xfffffff5, 0x310fffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xfffffff3,
+	0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0000cf3c,
+	0xcdcdcdcd, 0xfffffff1, 0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xfffffff6, 0x305fffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xfffff406,
+	0x1cbfffff, 0x0c30c305, 0xc30c30c3, 0xcf300014, 0xf3cf3cf3, 0x0004cf3c,
+	0xcdcdcdcd, 0xfffffff2, 0x304fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
+	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xfffffffa, 0x302fffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf300, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffff97,
+	0x040fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cc000, 0xf3cf3cf3, 0x0020cf3c,
+	0xcdcdcdcd, 0xfffffff5, 0x300fffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf300,
 	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
 	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c, 0xcdcdcdcd, 0xffffffff,
 	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0001cf3c,
@@ -2678,16 +2630,27 @@ static const u32 init_data_e1[] = {
 	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c,
 	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
 	0xf3cf3cf3, 0x0020cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
-	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0x00100000,
-	0x00070100, 0x00028170, 0x000b8198, 0x00020250, 0x00010270, 0x000f0280,
-	0x00010370, 0x00080000, 0x00080080, 0x00028100, 0x000b8128, 0x000201e0,
-	0x00010200, 0x00070210, 0x00020280, 0x000f0000, 0x000800f0, 0x00028170,
-	0x000b8198, 0x00020250, 0x00010270, 0x000b8280, 0x00080338, 0x00100000,
-	0x00080100, 0x00028180, 0x000b81a8, 0x00020260, 0x00018280, 0x000e8298,
-	0x00080380, 0x00028000, 0x000b8028, 0x000200e0, 0x00010100, 0x00008110,
-	0x00000118, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000,
-	0xcccccccc, 0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000, 0xcccccccc,
-	0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000
+	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0xffffffff,
+	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0000cf3c,
+	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+	0xf3cf3cf3, 0x0001cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0002cf3c, 0xcdcdcdcd, 0xffffffff,
+	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0004cf3c,
+	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+	0xf3cf3cf3, 0x0008cf3c, 0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c,
+	0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0010cf3c, 0xcdcdcdcd, 0xffffffff,
+	0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc, 0xf3cf3cf3, 0x0020cf3c,
+	0xcdcdcdcd, 0xffffffff, 0x30cfffff, 0x0c30c30c, 0xc30c30c3, 0xcf3cf3cc,
+	0xf3cf3cf3, 0x0040cf3c, 0xcdcdcdcd, 0x00100000, 0x00070100, 0x00028170,
+	0x000b8198, 0x00020250, 0x00010270, 0x000f0280, 0x00010370, 0x00080000,
+	0x00080080, 0x00028100, 0x000b8128, 0x000201e0, 0x00010200, 0x00070210,
+	0x00020280, 0x000f0000, 0x000800f0, 0x00028170, 0x000b8198, 0x00020250,
+	0x00010270, 0x000b8280, 0x00080338, 0x00100000, 0x00080100, 0x00028180,
+	0x000b81a8, 0x00020260, 0x00018280, 0x000e8298, 0x00080380, 0x00028000,
+	0x000b8028, 0x000200e0, 0x00010100, 0x00008110, 0x00000118, 0xcccccccc,
+	0xcccccccc, 0xcccccccc, 0xcccccccc, 0x00002000, 0xcccccccc, 0xcccccccc,
+	0xcccccccc, 0xcccccccc, 0x00002000, 0xcccccccc, 0xcccccccc, 0xcccccccc,
+	0xcccccccc, 0x00002000
 };
 
 static const u32 init_data_e1h[] = {
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index ff2743db10d..8b92c6ad075 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -31,17 +31,16 @@
 
 /********************************************************/
 #define SUPPORT_CL73 0 /* Currently no */
-#define ETH_HLEN 			14
+#define ETH_HLEN			14
 #define ETH_OVREHEAD		(ETH_HLEN + 8)/* 8 for CRC + VLAN*/
 #define ETH_MIN_PACKET_SIZE		60
 #define ETH_MAX_PACKET_SIZE		1500
 #define ETH_MAX_JUMBO_PACKET_SIZE	9600
 #define MDIO_ACCESS_TIMEOUT		1000
 #define BMAC_CONTROL_RX_ENABLE	2
-#define MAX_MTU_SIZE		5000
 
 /***********************************************************/
-/*                       Shortcut definitions              */
+/*			Shortcut definitions		   */
 /***********************************************************/
 
 #define NIG_STATUS_XGXS0_LINK10G \
@@ -80,12 +79,12 @@
 
 #define AUTONEG_CL37		SHARED_HW_CFG_AN_ENABLE_CL37
 #define AUTONEG_CL73		SHARED_HW_CFG_AN_ENABLE_CL73
-#define AUTONEG_BAM			SHARED_HW_CFG_AN_ENABLE_BAM
-#define AUTONEG_PARALLEL		\
+#define AUTONEG_BAM 		SHARED_HW_CFG_AN_ENABLE_BAM
+#define AUTONEG_PARALLEL \
 				SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION
-#define AUTONEG_SGMII_FIBER_AUTODET	\
+#define AUTONEG_SGMII_FIBER_AUTODET \
 				SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT
-#define AUTONEG_REMOTE_PHY		SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY
+#define AUTONEG_REMOTE_PHY	SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY
 
 #define GP_STATUS_PAUSE_RSOLUTION_TXSIDE \
 			MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE
@@ -202,11 +201,10 @@ static void bnx2x_emac_init(struct link_params *params,
 	/* init emac - use read-modify-write */
 	/* self clear reset */
 	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
-	EMAC_WR(EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
+	EMAC_WR(bp, EMAC_REG_EMAC_MODE, (val | EMAC_MODE_RESET));
 
 	timeout = 200;
-	do
-	{
+	do {
 		val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
 		DP(NETIF_MSG_LINK, "EMAC reset reg is %u\n", val);
 		if (!timeout) {
@@ -214,18 +212,18 @@ static void bnx2x_emac_init(struct link_params *params,
 			return;
 		}
 		timeout--;
-	}while (val & EMAC_MODE_RESET);
+	} while (val & EMAC_MODE_RESET);
 
 	/* Set mac address */
 	val = ((params->mac_addr[0] << 8) |
 		params->mac_addr[1]);
-	EMAC_WR(EMAC_REG_EMAC_MAC_MATCH, val);
+	EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH, val);
 
 	val = ((params->mac_addr[2] << 24) |
 	       (params->mac_addr[3] << 16) |
 	       (params->mac_addr[4] << 8) |
 		params->mac_addr[5]);
-	EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + 4, val);
+	EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + 4, val);
 }
 
 static u8 bnx2x_emac_enable(struct link_params *params,
@@ -286,7 +284,7 @@ static u8 bnx2x_emac_enable(struct link_params *params,
 	if (CHIP_REV_IS_SLOW(bp)) {
 		/* config GMII mode */
 		val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
-		EMAC_WR(EMAC_REG_EMAC_MODE,
+		EMAC_WR(bp, EMAC_REG_EMAC_MODE,
 			    (val | EMAC_MODE_PORT_GMII));
 	} else { /* ASIC */
 		/* pause enable/disable */
@@ -298,17 +296,19 @@ static u8 bnx2x_emac_enable(struct link_params *params,
 				    EMAC_RX_MODE_FLOW_EN);
 
 		bnx2x_bits_dis(bp,  emac_base + EMAC_REG_EMAC_TX_MODE,
-			       EMAC_TX_MODE_EXT_PAUSE_EN);
+			     (EMAC_TX_MODE_EXT_PAUSE_EN |
+			      EMAC_TX_MODE_FLOW_EN));
 		if (vars->flow_ctrl & FLOW_CTRL_TX)
 			bnx2x_bits_en(bp, emac_base +
 				    EMAC_REG_EMAC_TX_MODE,
-				      EMAC_TX_MODE_EXT_PAUSE_EN);
+				   (EMAC_TX_MODE_EXT_PAUSE_EN |
+				    EMAC_TX_MODE_FLOW_EN));
 	}
 
 	/* KEEP_VLAN_TAG, promiscuous */
 	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
 	val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
-	EMAC_WR(EMAC_REG_EMAC_RX_MODE, val);
+	EMAC_WR(bp, EMAC_REG_EMAC_RX_MODE, val);
 
 	/* Set Loopback */
 	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MODE);
@@ -316,10 +316,10 @@ static u8 bnx2x_emac_enable(struct link_params *params,
 		val |= 0x810;
 	else
 		val &= ~0x810;
-	EMAC_WR(EMAC_REG_EMAC_MODE, val);
+	EMAC_WR(bp, EMAC_REG_EMAC_MODE, val);
 
 	/* enable emac for jumbo packets */
-	EMAC_WR(EMAC_REG_EMAC_RX_MTU_SIZE,
+	EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE,
 		(EMAC_RX_MTU_SIZE_JUMBO_ENA |
 		 (ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD)));
 
@@ -591,9 +591,9 @@ void bnx2x_link_status_update(struct link_params *params,
 			vars->flow_ctrl &= ~FLOW_CTRL_RX;
 
 		if (vars->phy_flags & PHY_XGXS_FLAG) {
-			if (params->req_line_speed &&
-			    ((params->req_line_speed == SPEED_10) ||
-			     (params->req_line_speed == SPEED_100))) {
+			if (vars->line_speed &&
+			    ((vars->line_speed == SPEED_10) ||
+			     (vars->line_speed == SPEED_100))) {
 				vars->phy_flags |= PHY_SGMII_FLAG;
 			} else {
 				vars->phy_flags &= ~PHY_SGMII_FLAG;
@@ -645,7 +645,7 @@ static void bnx2x_bmac_rx_disable(struct bnx2x *bp, u8 port)
 	u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
 		NIG_REG_INGRESS_BMAC0_MEM;
 	u32 wb_data[2];
-    u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4);
+	u32 nig_bmac_enable = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port*4);
 
 	/* Only if the bmac is out of reset */
 	if (REG_RD(bp, MISC_REG_RESET_REG_2) &
@@ -670,7 +670,6 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
 	u8 port = params->port;
 	u32 init_crd, crd;
 	u32 count = 1000;
-	u32 pause = 0;
 
 	/* disable port */
 	REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1);
@@ -693,33 +692,25 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
 		return -EINVAL;
 	}
 
-	if (flow_ctrl & FLOW_CTRL_RX)
-		pause = 1;
-	REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, pause);
-	if (pause) {
+	if (flow_ctrl & FLOW_CTRL_RX ||
+	    line_speed == SPEED_10 ||
+	    line_speed == SPEED_100 ||
+	    line_speed == SPEED_1000 ||
+	    line_speed == SPEED_2500) {
+		REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 1);
 		/* update threshold */
 		REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, 0);
 		/* update init credit */
-		init_crd = 778;		/* (800-18-4) */
+		init_crd = 778; 	/* (800-18-4) */
 
 	} else {
 		u32 thresh = (ETH_MAX_JUMBO_PACKET_SIZE +
 			      ETH_OVREHEAD)/16;
-
+		REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0);
 		/* update threshold */
 		REG_WR(bp, PBF_REG_P0_ARB_THRSH + port*4, thresh);
 		/* update init credit */
 		switch (line_speed) {
-		case SPEED_10:
-		case SPEED_100:
-		case SPEED_1000:
-			init_crd = thresh + 55 - 22;
-			break;
-
-		case SPEED_2500:
-			init_crd = thresh + 138 - 22;
-			break;
-
 		case SPEED_10000:
 			init_crd = thresh + 553 - 22;
 			break;
@@ -764,10 +755,10 @@ static u32 bnx2x_get_emac_base(u32 ext_phy_type, u8 port)
 		emac_base = GRCBASE_EMAC0;
 		break;
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
-		emac_base = (port) ? GRCBASE_EMAC0: GRCBASE_EMAC1;
+		emac_base = (port) ? GRCBASE_EMAC0 : GRCBASE_EMAC1;
 		break;
 	default:
-		emac_base = (port) ? GRCBASE_EMAC1: GRCBASE_EMAC0;
+		emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 		break;
 	}
 	return emac_base;
@@ -1044,7 +1035,7 @@ static void bnx2x_set_swap_lanes(struct link_params *params)
 }
 
 static void bnx2x_set_parallel_detection(struct link_params *params,
-				       u8                phy_flags)
+				       u8       	 phy_flags)
 {
 	struct bnx2x *bp = params->bp;
 	u16 control2;
@@ -1114,7 +1105,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
 			      MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
 
 	/* CL37 Autoneg Enabled */
-	if (params->req_line_speed == SPEED_AUTO_NEG)
+	if (vars->line_speed == SPEED_AUTO_NEG)
 		reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN;
 	else /* CL37 Autoneg Disabled */
 		reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
@@ -1132,7 +1123,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
 			      MDIO_REG_BANK_SERDES_DIGITAL,
 			      MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &reg_val);
 	reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN;
-	if (params->req_line_speed == SPEED_AUTO_NEG)
+	if (vars->line_speed == SPEED_AUTO_NEG)
 		reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
 	else
 		reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET;
@@ -1148,7 +1139,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
 			      MDIO_REG_BANK_BAM_NEXT_PAGE,
 			      MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
 			  &reg_val);
-	if (params->req_line_speed == SPEED_AUTO_NEG) {
+	if (vars->line_speed == SPEED_AUTO_NEG) {
 		/* Enable BAM aneg Mode and TetonII aneg Mode */
 		reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE |
 			    MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN);
@@ -1164,7 +1155,7 @@ static void bnx2x_set_autoneg(struct link_params *params,
 			      reg_val);
 
 	/* Enable Clause 73 Aneg */
-	if ((params->req_line_speed == SPEED_AUTO_NEG) &&
+	if ((vars->line_speed == SPEED_AUTO_NEG) &&
 	    (SUPPORT_CL73)) {
 		/* Enable BAM Station Manager */
 
@@ -1226,7 +1217,8 @@ static void bnx2x_set_autoneg(struct link_params *params,
 }
 
 /* program SerDes, forced speed */
-static void bnx2x_program_serdes(struct link_params *params)
+static void bnx2x_program_serdes(struct link_params *params,
+			       struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
 	u16 reg_val;
@@ -1248,28 +1240,35 @@ static void bnx2x_program_serdes(struct link_params *params)
 
 	/* program speed
 	   - needed only if the speed is greater than 1G (2.5G or 10G) */
-	if (!((params->req_line_speed == SPEED_1000) ||
-	      (params->req_line_speed == SPEED_100) ||
-	      (params->req_line_speed == SPEED_10))) {
-		CL45_RD_OVER_CL22(bp, params->port,
+	CL45_RD_OVER_CL22(bp, params->port,
 				      params->phy_addr,
 				      MDIO_REG_BANK_SERDES_DIGITAL,
 				      MDIO_SERDES_DIGITAL_MISC1, &reg_val);
-		/* clearing the speed value before setting the right speed */
-		reg_val &= ~MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK;
+	/* clearing the speed value before setting the right speed */
+	DP(NETIF_MSG_LINK, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x\n", reg_val);
+
+	reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK |
+		     MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
+
+	if (!((vars->line_speed == SPEED_1000) ||
+	      (vars->line_speed == SPEED_100) ||
+	      (vars->line_speed == SPEED_10))) {
+
 		reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M |
 			    MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
-		if (params->req_line_speed == SPEED_10000)
+		if (vars->line_speed == SPEED_10000)
 			reg_val |=
 				MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4;
-		if (params->req_line_speed == SPEED_13000)
+		if (vars->line_speed == SPEED_13000)
 			reg_val |=
 				MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G;
-		CL45_WR_OVER_CL22(bp, params->port,
+	}
+
+	CL45_WR_OVER_CL22(bp, params->port,
 				      params->phy_addr,
 				      MDIO_REG_BANK_SERDES_DIGITAL,
 				      MDIO_SERDES_DIGITAL_MISC1, reg_val);
-	}
+
 }
 
 static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params)
@@ -1295,48 +1294,49 @@ static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params)
 			      MDIO_OVER_1G_UP3, 0);
 }
 
-static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
-					   u32 *ieee_fc)
+static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc)
 {
-	struct bnx2x *bp = params->bp;
-	/* for AN, we are always publishing full duplex */
-	u16 an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
-
+	*ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
 	/* resolve pause mode and advertisement
 	 * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
 
 	switch (params->req_flow_ctrl) {
 	case FLOW_CTRL_AUTO:
-		if (params->mtu <= MAX_MTU_SIZE) {
-			an_adv |=
+		if (params->req_fc_auto_adv == FLOW_CTRL_BOTH) {
+			*ieee_fc |=
 			     MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
 		} else {
-			an_adv |=
+			*ieee_fc |=
 		       MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
 		}
 		break;
 	case FLOW_CTRL_TX:
-		an_adv |=
+		*ieee_fc |=
 		       MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
 		break;
 
 	case FLOW_CTRL_RX:
 	case FLOW_CTRL_BOTH:
-		an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
 		break;
 
 	case FLOW_CTRL_NONE:
 	default:
-		an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
 		break;
 	}
+}
 
-	*ieee_fc = an_adv;
+static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
+					   u32 ieee_fc)
+{
+	struct bnx2x *bp = params->bp;
+	/* for AN, we are always publishing full duplex */
 
 	CL45_WR_OVER_CL22(bp, params->port,
 			      params->phy_addr,
 			      MDIO_REG_BANK_COMBO_IEEE0,
-			      MDIO_COMBO_IEEE0_AUTO_NEG_ADV, an_adv);
+			      MDIO_COMBO_IEEE0_AUTO_NEG_ADV, (u16)ieee_fc);
 }
 
 static void bnx2x_restart_autoneg(struct link_params *params)
@@ -1382,7 +1382,8 @@ static void bnx2x_restart_autoneg(struct link_params *params)
 	}
 }
 
-static void bnx2x_initialize_sgmii_process(struct link_params *params)
+static void bnx2x_initialize_sgmii_process(struct link_params *params,
+					 struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
 	u16 control1;
@@ -1406,7 +1407,7 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
 			      control1);
 
 	/* if forced speed */
-	if (!(params->req_line_speed == SPEED_AUTO_NEG)) {
+	if (!(vars->line_speed == SPEED_AUTO_NEG)) {
 		/* set speed, disable autoneg */
 		u16 mii_control;
 
@@ -1419,7 +1420,7 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
 				 MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK|
 				 MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX);
 
-		switch (params->req_line_speed) {
+		switch (vars->line_speed) {
 		case SPEED_100:
 			mii_control |=
 				MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100;
@@ -1433,8 +1434,8 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
 			break;
 		default:
 			/* invalid speed for SGMII */
-			DP(NETIF_MSG_LINK, "Invalid req_line_speed 0x%x\n",
-				  params->req_line_speed);
+			DP(NETIF_MSG_LINK, "Invalid line_speed 0x%x\n",
+				  vars->line_speed);
 			break;
 		}
 
@@ -1460,20 +1461,20 @@ static void bnx2x_initialize_sgmii_process(struct link_params *params)
  */
 
 static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
-{
-	switch (pause_result) {			/* ASYM P ASYM P */
-	case 0xb:				/*   1  0   1  1 */
+{						/*  LD	    LP	 */
+	switch (pause_result) { 		/* ASYM P ASYM P */
+	case 0xb:       			/*   1  0   1  1 */
 		vars->flow_ctrl = FLOW_CTRL_TX;
 		break;
 
-	case 0xe:				/*   1  1   1  0 */
+	case 0xe:       			/*   1  1   1  0 */
 		vars->flow_ctrl = FLOW_CTRL_RX;
 		break;
 
-	case 0x5:				/*   0  1   0  1 */
-	case 0x7:				/*   0  1   1  1 */
-	case 0xd:				/*   1  1   0  1 */
-	case 0xf:				/*   1  1   1  1 */
+	case 0x5:       			/*   0  1   0  1 */
+	case 0x7:       			/*   0  1   1  1 */
+	case 0xd:       			/*   1  1   0  1 */
+	case 0xf:       			/*   1  1   1  1 */
 		vars->flow_ctrl = FLOW_CTRL_BOTH;
 		break;
 
@@ -1531,6 +1532,28 @@ static u8 bnx2x_ext_phy_resove_fc(struct link_params *params,
 		DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
 		   pause_result);
 		bnx2x_pause_resolve(vars, pause_result);
+		if (vars->flow_ctrl == FLOW_CTRL_NONE &&
+		     ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
+			bnx2x_cl45_read(bp, port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_AN_DEVAD,
+				      MDIO_AN_REG_CL37_FC_LD, &ld_pause);
+
+			bnx2x_cl45_read(bp, port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_AN_DEVAD,
+				      MDIO_AN_REG_CL37_FC_LP, &lp_pause);
+			pause_result = (ld_pause &
+				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5;
+			pause_result |= (lp_pause &
+				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7;
+
+			bnx2x_pause_resolve(vars, pause_result);
+			DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x \n",
+				 pause_result);
+		}
 	}
 	return ret;
 }
@@ -1541,8 +1564,8 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params,
 				  u32 gp_status)
 {
 	struct bnx2x *bp = params->bp;
-	u16 ld_pause;	/* local driver */
-	u16 lp_pause;	/* link partner */
+	u16 ld_pause;   /* local driver */
+	u16 lp_pause;   /* link partner */
 	u16 pause_result;
 
 	vars->flow_ctrl = FLOW_CTRL_NONE;
@@ -1573,13 +1596,10 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params,
 		   (bnx2x_ext_phy_resove_fc(params, vars))) {
 		return;
 	} else {
-		vars->flow_ctrl = params->req_flow_ctrl;
-		if (vars->flow_ctrl == FLOW_CTRL_AUTO) {
-			if (params->mtu <= MAX_MTU_SIZE)
-				vars->flow_ctrl = FLOW_CTRL_BOTH;
-			else
-				vars->flow_ctrl = FLOW_CTRL_TX;
-		}
+		if (params->req_flow_ctrl == FLOW_CTRL_AUTO)
+			vars->flow_ctrl = params->req_fc_auto_adv;
+		else
+			vars->flow_ctrl = params->req_flow_ctrl;
 	}
 	DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", vars->flow_ctrl);
 }
@@ -1590,6 +1610,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 				      u32 gp_status)
 {
 	struct bnx2x *bp = params->bp;
+
 	u8 rc = 0;
 	vars->link_status = 0;
 
@@ -1690,7 +1711,11 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 
 		vars->link_status |= LINK_STATUS_SERDES_LINK;
 
-		if (params->req_line_speed == SPEED_AUTO_NEG) {
+		if ((params->req_line_speed == SPEED_AUTO_NEG) &&
+		    ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
+		    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705))) {
 			vars->autoneg = AUTO_NEG_ENABLED;
 
 			if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
@@ -1705,18 +1730,18 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
 
 		}
 		if (vars->flow_ctrl & FLOW_CTRL_TX)
-		       vars->link_status |=
-			LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
+			vars->link_status |=
+				LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
 
 		if (vars->flow_ctrl & FLOW_CTRL_RX)
-		       vars->link_status |=
-			LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
+			vars->link_status |=
+				LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
 
 	} else { /* link_down */
 		DP(NETIF_MSG_LINK, "phy link down\n");
 
 		vars->phy_link_up = 0;
-		vars->line_speed = 0;
+
 		vars->duplex = DUPLEX_FULL;
 		vars->flow_ctrl = FLOW_CTRL_NONE;
 		vars->autoneg = AUTO_NEG_DISABLED;
@@ -1817,15 +1842,15 @@ static u8 bnx2x_emac_program(struct link_params *params,
 }
 
 /*****************************************************************************/
-/*                           External Phy section                            */
+/*      		     External Phy section       		     */
 /*****************************************************************************/
-static void bnx2x_hw_reset(struct bnx2x *bp)
+static void bnx2x_hw_reset(struct bnx2x *bp, u8 port)
 {
 	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-		       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+		       MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
 	msleep(1);
 	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-		      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+		      MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
 }
 
 static void bnx2x_ext_phy_reset(struct link_params *params,
@@ -1854,10 +1879,11 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
 			/* Restore normal power mode*/
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			/* HW reset */
-			bnx2x_hw_reset(bp);
+			bnx2x_hw_reset(bp, params->port);
 
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
@@ -1869,7 +1895,8 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 			/* Unset Low Power Mode and SW reset */
 			/* Restore normal power mode*/
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			DP(NETIF_MSG_LINK, "XGXS 8072\n");
 			bnx2x_cl45_write(bp, params->port,
@@ -1887,19 +1914,14 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
 			/* Restore normal power mode*/
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			DP(NETIF_MSG_LINK, "XGXS 8073\n");
-			bnx2x_cl45_write(bp,
-				       params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_CTRL,
-				       1<<15);
 			}
 			break;
 
@@ -1908,10 +1930,11 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
 			/* Restore normal power mode*/
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				      MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+				      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+					  params->port);
 
 			/* HW reset */
-			bnx2x_hw_reset(bp);
+			bnx2x_hw_reset(bp, params->port);
 
 			break;
 
@@ -1934,7 +1957,7 @@ static void bnx2x_ext_phy_reset(struct link_params *params,
 
 		case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
 			DP(NETIF_MSG_LINK, "SerDes 5482\n");
-			bnx2x_hw_reset(bp);
+			bnx2x_hw_reset(bp, params->port);
 			break;
 
 		default:
@@ -2098,42 +2121,45 @@ static u8 bnx2x_bcm8073_xaui_wa(struct link_params *params)
 
 }
 
-static void bnx2x_bcm8073_external_rom_boot(struct link_params *params)
+static void bnx2x_bcm8073_external_rom_boot(struct bnx2x *bp, u8 port,
+					  u8 ext_phy_addr)
 {
-	struct bnx2x *bp = params->bp;
-	u8 port = params->port;
-	u8 ext_phy_addr = ((params->ext_phy_config &
-			     PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-			    PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
-	u16 fw_ver1, fw_ver2, val;
-	/* Need to wait 100ms after reset */
-	msleep(100);
-	/* Boot port from external ROM	*/
+	u16 fw_ver1, fw_ver2;
+	/* Boot port from external ROM  */
 	/* EDC grst */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
 		       0x0001);
 
 	/* ucode reboot and rst */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
 		       0x008c);
 
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_MISC_CTRL1, 0x0001);
 
 	/* Reset internal microprocessor */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
 		       MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
 
 	/* Release srst bit */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
 		       MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
@@ -2142,35 +2168,52 @@ static void bnx2x_bcm8073_external_rom_boot(struct link_params *params)
 	msleep(100);
 
 	/* Clear ser_boot_ctl bit */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_write(bp, port,
+		       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_MISC_CTRL1, 0x0000);
 
-	bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_ROM_VER1, &fw_ver1);
-	bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_ROM_VER2, &fw_ver2);
+	bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+	bnx2x_cl45_read(bp, port,
+		      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+		      ext_phy_addr,
+		      MDIO_PMA_DEVAD,
+		      MDIO_PMA_REG_ROM_VER2, &fw_ver2);
 	DP(NETIF_MSG_LINK, "8073 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
 
-	/* Only set bit 10 = 1 (Tx power down) */
-	bnx2x_cl45_read(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_TX_POWER_DOWN, &val);
+}
 
+static void bnx2x_bcm807x_force_10G(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u8 ext_phy_addr = ((params->ext_phy_config &
+				PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+				PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+
+	/* Force KR or KX */
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_TX_POWER_DOWN, (val | 1<<10));
-
-	msleep(600);
-	/* Release bit 10 (Release Tx power down) */
+		       MDIO_PMA_REG_CTRL,
+		       0x2040);
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10))));
-
+		       MDIO_PMA_REG_10G_CTRL2,
+		       0x000b);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_PMA_DEVAD,
+		       MDIO_PMA_REG_BCM_CTRL,
+		       0x0000);
+	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+		       MDIO_AN_DEVAD,
+		       MDIO_AN_REG_CTRL,
+		       0x0000);
 }
-
 static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
 {
 	struct bnx2x *bp = params->bp;
@@ -2236,32 +2279,51 @@ static void bnx2x_bcm8073_set_xaui_low_power_mode(struct link_params *params)
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_XS_DEVAD, MDIO_XS_PLL_SEQUENCER, val);
 }
-static void bnx2x_bcm807x_force_10G(struct link_params *params)
+
+static void bnx2x_8073_set_pause_cl37(struct link_params *params,
+				  struct link_vars *vars)
 {
+
 	struct bnx2x *bp = params->bp;
-	u8 port = params->port;
+	u16 cl37_val;
 	u8 ext_phy_addr = ((params->ext_phy_config &
 				PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
 				PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
 	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
-	/* Force KR or KX */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_CTRL,
-		       0x2040);
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_10G_CTRL2,
-		       0x000b);
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_BCM_CTRL,
-		       0x0000);
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
+	bnx2x_cl45_read(bp, params->port,
+		      ext_phy_type,
+		      ext_phy_addr,
+		      MDIO_AN_DEVAD,
+		      MDIO_AN_REG_CL37_FC_LD, &cl37_val);
+
+	cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+	/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) {
+		cl37_val |=  MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
+	}
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
+		cl37_val |=  MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+	}
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
+		cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+	}
+	DP(NETIF_MSG_LINK,
+		 "Ext phy AN advertize cl37 0x%x\n", cl37_val);
+
+	bnx2x_cl45_write(bp, params->port,
+		       ext_phy_type,
+		       ext_phy_addr,
 		       MDIO_AN_DEVAD,
-		       MDIO_AN_REG_CTRL,
-		       0x0000);
+		       MDIO_AN_REG_CL37_FC_LD, cl37_val);
+	msleep(500);
 }
 
 static void bnx2x_ext_phy_set_pause(struct link_params *params,
@@ -2282,13 +2344,16 @@ static void bnx2x_ext_phy_set_pause(struct link_params *params,
 		      MDIO_AN_REG_ADV_PAUSE, &val);
 
 	val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH;
+
 	/* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
 
-	if (vars->ieee_fc &
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
 	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
 		val |=  MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
 	}
-	if (vars->ieee_fc &
+	if ((vars->ieee_fc &
+	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
 	    MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
 		val |=
 		 MDIO_AN_REG_ADV_PAUSE_PAUSE;
@@ -2302,6 +2367,65 @@ static void bnx2x_ext_phy_set_pause(struct link_params *params,
 		       MDIO_AN_REG_ADV_PAUSE, val);
 }
 
+
+static void bnx2x_init_internal_phy(struct link_params *params,
+				struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
+		u16 bank, rx_eq;
+
+		rx_eq = ((params->serdes_config &
+			  PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK) >>
+			 PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT);
+
+		DP(NETIF_MSG_LINK, "setting rx eq to 0x%x\n", rx_eq);
+		for (bank = MDIO_REG_BANK_RX0; bank <= MDIO_REG_BANK_RX_ALL;
+		      bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0)) {
+			CL45_WR_OVER_CL22(bp, port,
+					      params->phy_addr,
+					      bank ,
+					      MDIO_RX0_RX_EQ_BOOST,
+					      ((rx_eq &
+				MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK) |
+				MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL));
+		}
+
+		/* forced speed requested? */
+		if (vars->line_speed != SPEED_AUTO_NEG) {
+			DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
+
+			/* disable autoneg */
+			bnx2x_set_autoneg(params, vars);
+
+			/* program speed and duplex */
+			bnx2x_program_serdes(params, vars);
+
+		} else { /* AN_mode */
+			DP(NETIF_MSG_LINK, "not SGMII, AN\n");
+
+			/* AN enabled */
+			bnx2x_set_brcm_cl37_advertisment(params);
+
+			/* program duplex & pause advertisement (for aneg) */
+			bnx2x_set_ieee_aneg_advertisment(params,
+						       vars->ieee_fc);
+
+			/* enable autoneg */
+			bnx2x_set_autoneg(params, vars);
+
+			/* enable and restart AN */
+			bnx2x_restart_autoneg(params);
+		}
+
+	} else { /* SGMII mode */
+		DP(NETIF_MSG_LINK, "SGMII\n");
+
+		bnx2x_initialize_sgmii_process(params, vars);
+	}
+}
+
 static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
@@ -2343,7 +2467,6 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 
 		switch (ext_phy_type) {
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
-			DP(NETIF_MSG_LINK, "XGXS Direct\n");
 			break;
 
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
@@ -2419,7 +2542,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 					       ext_phy_type,
 					       ext_phy_addr,
 					       MDIO_AN_DEVAD,
-					       MDIO_AN_REG_CL37_FD,
+					       MDIO_AN_REG_CL37_FC_LP,
 					       0x0020);
 				/* Enable CL37 AN */
 				bnx2x_cl45_write(bp, params->port,
@@ -2458,54 +2581,43 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 				rx_alarm_ctrl_val = 0x400;
 				lasi_ctrl_val = 0x0004;
 			} else {
-				/* In 8073, port1 is directed through emac0 and
-				 * port0 is directed through emac1
-				 */
 				rx_alarm_ctrl_val = (1<<2);
-				/*lasi_ctrl_val = 0x0005;*/
 				lasi_ctrl_val = 0x0004;
 			}
 
-			/* Wait for soft reset to get cleared upto 1 sec */
-			for (cnt = 0; cnt < 1000; cnt++) {
-				bnx2x_cl45_read(bp, params->port,
-					      ext_phy_type,
-					      ext_phy_addr,
-					      MDIO_PMA_DEVAD,
-					      MDIO_PMA_REG_CTRL,
-					      &ctrl);
-				if (!(ctrl & (1<<15)))
-					break;
-				msleep(1);
-			}
-			DP(NETIF_MSG_LINK,
-				"807x control reg 0x%x (after %d ms)\n",
-				ctrl, cnt);
+			/* enable LASI */
+			bnx2x_cl45_write(bp, params->port,
+				   ext_phy_type,
+				   ext_phy_addr,
+				   MDIO_PMA_DEVAD,
+				   MDIO_PMA_REG_RX_ALARM_CTRL,
+				   rx_alarm_ctrl_val);
+
+			bnx2x_cl45_write(bp, params->port,
+				       ext_phy_type,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_LASI_CTRL,
+				       lasi_ctrl_val);
+
+			bnx2x_8073_set_pause_cl37(params, vars);
 
 			if (ext_phy_type ==
 			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072){
 				bnx2x_bcm8072_external_rom_boot(params);
 			} else {
-				bnx2x_bcm8073_external_rom_boot(params);
+
 				/* In case of 8073 with long xaui lines,
 				don't set the 8073 xaui low power*/
 				bnx2x_bcm8073_set_xaui_low_power_mode(params);
 			}
 
-			/* enable LASI */
-			bnx2x_cl45_write(bp, params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_RX_ALARM_CTRL,
-				       rx_alarm_ctrl_val);
-
-			bnx2x_cl45_write(bp, params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_LASI_CTRL,
-				       lasi_ctrl_val);
+			bnx2x_cl45_read(bp, params->port,
+				      ext_phy_type,
+				      ext_phy_addr,
+				      MDIO_PMA_DEVAD,
+				      0xca13,
+				      &tmp1);
 
 			bnx2x_cl45_read(bp, params->port,
 				      ext_phy_type,
@@ -2519,12 +2631,21 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 			/* If this is forced speed, set to KR or KX
 			 * (all other are not supported)
 			 */
-			if (!(params->req_line_speed == SPEED_AUTO_NEG)) {
-			if (params->req_line_speed == SPEED_10000) {
-					bnx2x_bcm807x_force_10G(params);
-					DP(NETIF_MSG_LINK,
-					   "Forced speed 10G on 807X\n");
-					break;
+			if (params->loopback_mode == LOOPBACK_EXT) {
+				bnx2x_bcm807x_force_10G(params);
+				DP(NETIF_MSG_LINK,
+					"Forced speed 10G on 807X\n");
+				break;
+			} else {
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type, ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_BCM_CTRL,
+					       0x0002);
+			}
+			if (params->req_line_speed != SPEED_AUTO_NEG) {
+				if (params->req_line_speed == SPEED_10000) {
+					val = (1<<7);
 				} else if (params->req_line_speed ==
 					   SPEED_2500) {
 					val = (1<<5);
@@ -2539,11 +2660,14 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 					PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
 					val |= (1<<7);
 
+				/* Note that 2.5G works only when
+				used with 1G advertisment */
 				if (params->speed_cap_mask &
-					PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+					(PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
+					 PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
 					val |= (1<<5);
-				DP(NETIF_MSG_LINK, "807x autoneg val = 0x%x\n", val);
-				/*val = ((1<<5)|(1<<7));*/
+				DP(NETIF_MSG_LINK,
+					 "807x autoneg val = 0x%x\n", val);
 			}
 
 			bnx2x_cl45_write(bp, params->port,
@@ -2554,20 +2678,19 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 
 			if (ext_phy_type ==
 			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-				/* Disable 2.5Ghz */
+
 				bnx2x_cl45_read(bp, params->port,
 					      ext_phy_type,
 					      ext_phy_addr,
 					      MDIO_AN_DEVAD,
 					      0x8329, &tmp1);
-/* SUPPORT_SPEED_CAPABILITY
-				(Due to the nature of the link order, its not
-				possible to enable 2.5G within the autoneg
-				capabilities)
-				if (params->speed_cap_mask &
-				PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)
-*/
-				if (params->req_line_speed == SPEED_2500) {
+
+				if (((params->speed_cap_mask &
+				      PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) &&
+				     (params->req_line_speed ==
+				      SPEED_AUTO_NEG)) ||
+				    (params->req_line_speed ==
+				     SPEED_2500)) {
 					u16 phy_ver;
 					/* Allow 2.5G for A1 and above */
 					bnx2x_cl45_read(bp, params->port,
@@ -2575,49 +2698,53 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 					 ext_phy_addr,
 					 MDIO_PMA_DEVAD,
 					 0xc801, &phy_ver);
-
+					DP(NETIF_MSG_LINK, "Add 2.5G\n");
 					if (phy_ver > 0)
 						tmp1 |= 1;
 					else
 						tmp1 &= 0xfffe;
-			}
-				else
+				} else {
+					DP(NETIF_MSG_LINK, "Disable 2.5G\n");
 					tmp1 &= 0xfffe;
+				}
 
-			bnx2x_cl45_write(bp, params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_AN_DEVAD,
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
 					       0x8329, tmp1);
 			}
-			/* Add support for CL37 (passive mode) I */
-			bnx2x_cl45_write(bp, params->port,
+
+			/* Add support for CL37 (passive mode) II */
+
+			bnx2x_cl45_read(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
 				       MDIO_AN_DEVAD,
-				       MDIO_AN_REG_CL37_CL73, 0x040c);
-			/* Add support for CL37 (passive mode) II */
+				       MDIO_AN_REG_CL37_FC_LD,
+				       &tmp1);
+
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
 				       MDIO_AN_DEVAD,
-				       MDIO_AN_REG_CL37_FD, 0x20);
+				       MDIO_AN_REG_CL37_FC_LD, (tmp1 |
+				       ((params->req_duplex == DUPLEX_FULL) ?
+				       0x20 : 0x40)));
+
 			/* Add support for CL37 (passive mode) III */
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
 				       MDIO_AN_DEVAD,
 				       MDIO_AN_REG_CL37_AN, 0x1000);
-			/* Restart autoneg */
-			msleep(500);
 
 			if (ext_phy_type ==
 			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-
-			/* The SNR will improve about 2db by changing the
+				/* The SNR will improve about 2db by changing
 				BW and FEE main tap. Rest commands are executed
 				after link is up*/
-			/* Change FFE main cursor to 5 in EDC register */
+				/*Change FFE main cursor to 5 in EDC register*/
 				if (bnx2x_8073_is_snr_needed(params))
 					bnx2x_cl45_write(bp, params->port,
 						    ext_phy_type,
@@ -2626,25 +2753,28 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 						    MDIO_PMA_REG_EDC_FFE_MAIN,
 						    0xFB0C);
 
-			/* Enable FEC (Forware Error Correction)
-			   Request in the AN */
-			bnx2x_cl45_read(bp, params->port,
-				      ext_phy_type,
-				      ext_phy_addr,
-				      MDIO_AN_DEVAD,
-				      MDIO_AN_REG_ADV2, &tmp1);
+				/* Enable FEC (Forware Error Correction)
+				Request in the AN */
+				bnx2x_cl45_read(bp, params->port,
+					      ext_phy_type,
+					      ext_phy_addr,
+					      MDIO_AN_DEVAD,
+					      MDIO_AN_REG_ADV2, &tmp1);
 
-			tmp1 |= (1<<15);
+				tmp1 |= (1<<15);
+
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_AN_DEVAD,
+					       MDIO_AN_REG_ADV2, tmp1);
 
-			bnx2x_cl45_write(bp, params->port,
-				      ext_phy_type,
-				      ext_phy_addr,
-				      MDIO_AN_DEVAD,
-				      MDIO_AN_REG_ADV2, tmp1);
 			}
 
 			bnx2x_ext_phy_set_pause(params, vars);
 
+			/* Restart autoneg */
+			msleep(500);
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
@@ -2701,10 +2831,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 		}
 
 	} else { /* SerDes */
-/*		ext_phy_addr = ((bp->ext_phy_config &
-				 PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >>
-				PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT);
-*/
+
 		ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);
 		switch (ext_phy_type) {
 		case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
@@ -2726,7 +2853,7 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
 
 
 static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
-				  struct link_vars *vars)
+				 struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
 	u32 ext_phy_type;
@@ -2767,6 +2894,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 				      MDIO_PMA_REG_RX_SD, &rx_sd);
 			DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
 			ext_phy_link_up = (rx_sd & 0x1);
+			if (ext_phy_link_up)
+				vars->line_speed = SPEED_10000;
 			break;
 
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
@@ -2810,6 +2939,13 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 			 */
 			ext_phy_link_up = ((rx_sd & pcs_status & 0x1) ||
 					   (val2 & (1<<1)));
+			if (ext_phy_link_up) {
+				if (val2 & (1<<1))
+					vars->line_speed = SPEED_1000;
+				else
+					vars->line_speed = SPEED_10000;
+			}
+
 			/* clear LASI indication*/
 			bnx2x_cl45_read(bp, params->port, ext_phy_type,
 				      ext_phy_addr,
@@ -2820,6 +2956,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
 		{
+			u16 link_status = 0;
+			u16 an1000_status = 0;
 			if (ext_phy_type ==
 			     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) {
 				bnx2x_cl45_read(bp, params->port,
@@ -2846,14 +2984,9 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 					      MDIO_PMA_DEVAD,
 					      MDIO_PMA_REG_LASI_STATUS, &val1);
 
-				bnx2x_cl45_read(bp, params->port,
-					      ext_phy_type,
-					      ext_phy_addr,
-					      MDIO_PMA_DEVAD,
-					      MDIO_PMA_REG_LASI_STATUS, &val2);
 				DP(NETIF_MSG_LINK,
-					 "8703 LASI status 0x%x->0x%x\n",
-					  val1, val2);
+					 "8703 LASI status 0x%x\n",
+					  val1);
 			}
 
 			/* clear the interrupt LASI status register */
@@ -2869,20 +3002,23 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 				      MDIO_PCS_REG_STATUS, &val1);
 			DP(NETIF_MSG_LINK, "807x PCS status 0x%x->0x%x\n",
 			   val2, val1);
-			/* Check the LASI */
+			/* Clear MSG-OUT */
 			bnx2x_cl45_read(bp, params->port,
 				      ext_phy_type,
 				      ext_phy_addr,
 				      MDIO_PMA_DEVAD,
-				      MDIO_PMA_REG_RX_ALARM, &val2);
+				      0xca13,
+				      &val1);
+
+			/* Check the LASI */
 			bnx2x_cl45_read(bp, params->port,
 				      ext_phy_type,
 				      ext_phy_addr,
 				      MDIO_PMA_DEVAD,
-				      MDIO_PMA_REG_RX_ALARM,
-				      &val1);
-			DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n",
-			   val2, val1);
+				      MDIO_PMA_REG_RX_ALARM, &val2);
+
+			DP(NETIF_MSG_LINK, "KR 0x9003 0x%x\n", val2);
+
 			/* Check the link status */
 			bnx2x_cl45_read(bp, params->port,
 				      ext_phy_type,
@@ -2905,29 +3041,29 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 			DP(NETIF_MSG_LINK, "PMA_REG_STATUS=0x%x\n", val1);
 			if (ext_phy_type ==
 			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-				u16 an1000_status = 0;
+
 				if (ext_phy_link_up &&
-				    (
-				     (params->req_line_speed != SPEED_10000)
-				     )) {
+				    ((params->req_line_speed !=
+					SPEED_10000))) {
 					if (bnx2x_bcm8073_xaui_wa(params)
 					     != 0) {
 						ext_phy_link_up = 0;
 						break;
 					}
-					bnx2x_cl45_read(bp, params->port,
+				}
+				bnx2x_cl45_read(bp, params->port,
 						      ext_phy_type,
 						      ext_phy_addr,
-						      MDIO_XS_DEVAD,
+						      MDIO_AN_DEVAD,
 						      0x8304,
 						      &an1000_status);
-					bnx2x_cl45_read(bp, params->port,
+				bnx2x_cl45_read(bp, params->port,
 						      ext_phy_type,
 						      ext_phy_addr,
-						      MDIO_XS_DEVAD,
+						      MDIO_AN_DEVAD,
 						      0x8304,
 						      &an1000_status);
-				}
+
 				/* Check the link status on 1.1.2 */
 				bnx2x_cl45_read(bp, params->port,
 					      ext_phy_type,
@@ -2943,8 +3079,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 					     "an_link_status=0x%x\n",
 					  val2, val1, an1000_status);
 
-				ext_phy_link_up = (((val1 & 4) == 4) ||
-						    (an1000_status & (1<<1)));
+					ext_phy_link_up = (((val1 & 4) == 4) ||
+						(an1000_status & (1<<1)));
 				if (ext_phy_link_up &&
 				    bnx2x_8073_is_snr_needed(params)) {
 					/* The SNR will improve about 2dbby
@@ -2968,8 +3104,74 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 						    MDIO_PMA_REG_CDR_BANDWIDTH,
 						    0x0333);
 
+
+				}
+				bnx2x_cl45_read(bp, params->port,
+						      ext_phy_type,
+						      ext_phy_addr,
+						      MDIO_PMA_DEVAD,
+						      0xc820,
+						      &link_status);
+
+				/* Bits 0..2 --> speed detected,
+				   bits 13..15--> link is down */
+				if ((link_status & (1<<2)) &&
+				    (!(link_status & (1<<15)))) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_10000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 10G\n", params->port);
+				} else if ((link_status & (1<<1)) &&
+					   (!(link_status & (1<<14)))) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_2500;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 2.5G\n", params->port);
+				} else if ((link_status & (1<<0)) &&
+					   (!(link_status & (1<<13)))) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_1000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 1G\n", params->port);
+				} else {
+					ext_phy_link_up = 0;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " is down\n", params->port);
+				}
+			} else {
+				/* See if 1G link is up for the 8072 */
+				bnx2x_cl45_read(bp, params->port,
+						      ext_phy_type,
+						      ext_phy_addr,
+						      MDIO_AN_DEVAD,
+						      0x8304,
+						      &an1000_status);
+				bnx2x_cl45_read(bp, params->port,
+						      ext_phy_type,
+						      ext_phy_addr,
+						      MDIO_AN_DEVAD,
+						      0x8304,
+						      &an1000_status);
+				if (an1000_status & (1<<1)) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_1000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 1G\n", params->port);
+				} else if (ext_phy_link_up) {
+					ext_phy_link_up = 1;
+					vars->line_speed = SPEED_10000;
+					DP(NETIF_MSG_LINK,
+						 "port %x: External link"
+						 " up in 10G\n", params->port);
 				}
 			}
+
+
 			break;
 		}
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
@@ -3006,6 +3208,7 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 					      MDIO_AN_DEVAD,
 					      MDIO_AN_REG_MASTER_STATUS,
 					      &val2);
+				vars->line_speed = SPEED_10000;
 				DP(NETIF_MSG_LINK,
 					 "SFX7101 AN status 0x%x->Master=%x\n",
 					  val2,
@@ -3100,7 +3303,7 @@ static void bnx2x_link_int_enable(struct link_params *params)
  * link management
  */
 static void bnx2x_link_int_ack(struct link_params *params,
-			     struct link_vars *vars, u16 is_10g)
+			     struct link_vars *vars, u8 is_10g)
 {
 	struct bnx2x *bp = params->bp;
 	u8 port = params->port;
@@ -3181,7 +3384,8 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len)
 }
 
 
-static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
+static void bnx2x_turn_on_ef(struct bnx2x *bp, u8 port, u8 ext_phy_addr,
+			   u32 ext_phy_type)
 {
 	u32 cnt = 0;
 	u16 ctrl = 0;
@@ -3192,12 +3396,14 @@ static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
 
 	/* take ext phy out of reset */
 	bnx2x_set_gpio(bp,
-			MISC_REGISTERS_GPIO_2,
-			MISC_REGISTERS_GPIO_HIGH);
+			  MISC_REGISTERS_GPIO_2,
+			  MISC_REGISTERS_GPIO_HIGH,
+			  port);
 
 	bnx2x_set_gpio(bp,
-			MISC_REGISTERS_GPIO_1,
-			MISC_REGISTERS_GPIO_HIGH);
+			  MISC_REGISTERS_GPIO_1,
+			  MISC_REGISTERS_GPIO_HIGH,
+			  port);
 
 	/* wait for 5ms */
 	msleep(5);
@@ -3205,7 +3411,7 @@ static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
 	for (cnt = 0; cnt < 1000; cnt++) {
 		msleep(1);
 		bnx2x_cl45_read(bp, port,
-			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
+			      ext_phy_type,
 			      ext_phy_addr,
 			      MDIO_PMA_DEVAD,
 			      MDIO_PMA_REG_CTRL,
@@ -3217,13 +3423,17 @@ static void bnx2x_turn_on_sf(struct bnx2x *bp, u8 port, u8 ext_phy_addr)
 	}
 }
 
-static void bnx2x_turn_off_sf(struct bnx2x *bp)
+static void bnx2x_turn_off_sf(struct bnx2x *bp, u8 port)
 {
 	/* put sf to reset */
-	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, MISC_REGISTERS_GPIO_LOW);
 	bnx2x_set_gpio(bp,
-			MISC_REGISTERS_GPIO_2,
-			MISC_REGISTERS_GPIO_LOW);
+			  MISC_REGISTERS_GPIO_1,
+			  MISC_REGISTERS_GPIO_LOW,
+			  port);
+	bnx2x_set_gpio(bp,
+			  MISC_REGISTERS_GPIO_2,
+			  MISC_REGISTERS_GPIO_LOW,
+			  port);
 }
 
 u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
@@ -3253,7 +3463,8 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 
 		/* Take ext phy out of reset */
 		if (!driver_loaded)
-			bnx2x_turn_on_sf(bp, params->port, ext_phy_addr);
+			bnx2x_turn_on_ef(bp, params->port, ext_phy_addr,
+				       ext_phy_type);
 
 		/*  wait for 1ms */
 		msleep(1);
@@ -3276,11 +3487,16 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 		version[4] = '\0';
 
 		if (!driver_loaded)
-			bnx2x_turn_off_sf(bp);
+			bnx2x_turn_off_sf(bp, params->port);
 		break;
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
 	{
+		/* Take ext phy out of reset */
+		if (!driver_loaded)
+			bnx2x_turn_on_ef(bp, params->port, ext_phy_addr,
+				       ext_phy_type);
+
 		bnx2x_cl45_read(bp, params->port, ext_phy_type,
 			      ext_phy_addr,
 			      MDIO_PMA_DEVAD,
@@ -3333,7 +3549,7 @@ static void bnx2x_set_xgxs_loopback(struct link_params *params,
 	struct bnx2x *bp = params->bp;
 
 	if (is_10g) {
-		 u32 md_devad;
+		u32 md_devad;
 
 		DP(NETIF_MSG_LINK, "XGXS 10G loopback enable\n");
 
@@ -3553,6 +3769,8 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 	       u16 hw_led_mode, u32 chip_id)
 {
 	u8 rc = 0;
+	u32 tmp;
+	u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 	DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode);
 	DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n",
 		 speed, hw_led_mode);
@@ -3561,6 +3779,9 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 		REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 0);
 		REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
 			   SHARED_HW_CFG_LED_MAC1);
+
+		tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+		EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE));
 		break;
 
 	case LED_MODE_OPER:
@@ -3572,6 +3793,10 @@ u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 			   LED_BLINK_RATE_VAL);
 		REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 +
 			   port*4, 1);
+		tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
+		EMAC_WR(bp, EMAC_REG_EMAC_LED,
+			    (tmp & (~EMAC_LED_OVERRIDE)));
+
 		if (!CHIP_IS_E1H(bp) &&
 		    ((speed == SPEED_2500) ||
 		     (speed == SPEED_1000) ||
@@ -3622,7 +3847,8 @@ static u8 bnx2x_link_initialize(struct link_params *params,
 	struct bnx2x *bp = params->bp;
 	u8 port = params->port;
 	u8 rc = 0;
-
+	u8 non_ext_phy;
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 	/* Activate the external PHY */
 	bnx2x_ext_phy_reset(params, vars);
 
@@ -3644,10 +3870,6 @@ static u8 bnx2x_link_initialize(struct link_params *params,
 		bnx2x_set_swap_lanes(params);
 	}
 
-	/* Set Parallel Detect */
-	if (params->req_line_speed == SPEED_AUTO_NEG)
-		bnx2x_set_parallel_detection(params, vars->phy_flags);
-
 	if (vars->phy_flags & PHY_XGXS_FLAG) {
 		if (params->req_line_speed &&
 		    ((params->req_line_speed == SPEED_100) ||
@@ -3657,68 +3879,33 @@ static u8 bnx2x_link_initialize(struct link_params *params,
 			vars->phy_flags &= ~PHY_SGMII_FLAG;
 		}
 	}
+	/* In case of external phy existance, the line speed would be the
+	 line speed linked up by the external phy. In case it is direct only,
+	  then the line_speed during initialization will be equal to the
+	   req_line_speed*/
+	vars->line_speed = params->req_line_speed;
 
-	if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
-		u16 bank, rx_eq;
-
-		rx_eq = ((params->serdes_config &
-			  PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK) >>
-			 PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT);
+	bnx2x_calc_ieee_aneg_adv(params, &vars->ieee_fc);
 
-		DP(NETIF_MSG_LINK, "setting rx eq to 0x%x\n", rx_eq);
-		for (bank = MDIO_REG_BANK_RX0; bank <= MDIO_REG_BANK_RX_ALL;
-		      bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0)) {
-			CL45_WR_OVER_CL22(bp, port,
-					      params->phy_addr,
-					      bank ,
-					      MDIO_RX0_RX_EQ_BOOST,
-					      ((rx_eq &
-				MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK) |
-				MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL));
-		}
-
-		/* forced speed requested? */
-		if (params->req_line_speed != SPEED_AUTO_NEG) {
-			DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
-
-			/* disable autoneg */
-			bnx2x_set_autoneg(params, vars);
-
-			/* program speed and duplex */
-			bnx2x_program_serdes(params);
-			vars->ieee_fc =
-				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
-
-		} else { /* AN_mode */
-			DP(NETIF_MSG_LINK, "not SGMII, AN\n");
-
-			/* AN enabled */
-			bnx2x_set_brcm_cl37_advertisment(params);
-
-			/* program duplex & pause advertisement (for aneg) */
-			bnx2x_set_ieee_aneg_advertisment(params,
-						       &vars->ieee_fc);
-
-			/* enable autoneg */
-			bnx2x_set_autoneg(params, vars);
-
-			/* enable and restart AN */
-			bnx2x_restart_autoneg(params);
-		}
-
-	} else { /* SGMII mode */
-		DP(NETIF_MSG_LINK, "SGMII\n");
-
-		bnx2x_initialize_sgmii_process(params);
+	/* init ext phy and enable link state int */
+	non_ext_phy = ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ||
+		       (params->loopback_mode == LOOPBACK_XGXS_10) ||
+		       (params->loopback_mode == LOOPBACK_EXT_PHY));
+
+	if (non_ext_phy ||
+	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705)) {
+		if (params->req_line_speed == SPEED_AUTO_NEG)
+			bnx2x_set_parallel_detection(params, vars->phy_flags);
+		bnx2x_init_internal_phy(params, vars);
 	}
 
-	/* init ext phy and enable link state int */
-	rc |= bnx2x_ext_phy_init(params, vars);
+	if (!non_ext_phy)
+		rc |= bnx2x_ext_phy_init(params, vars);
 
 	bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
-		       (NIG_STATUS_XGXS0_LINK10G |
-			NIG_STATUS_XGXS0_LINK_STATUS |
-			NIG_STATUS_SERDES0_LINK_STATUS));
+		     (NIG_STATUS_XGXS0_LINK10G |
+		      NIG_STATUS_XGXS0_LINK_STATUS |
+		      NIG_STATUS_SERDES0_LINK_STATUS));
 
 	return rc;
 
@@ -3730,15 +3917,23 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
 	struct bnx2x *bp = params->bp;
 
 	u32 val;
-	DP(NETIF_MSG_LINK, "Phy Initialization started\n");
+	DP(NETIF_MSG_LINK, "Phy Initialization started \n");
 	DP(NETIF_MSG_LINK, "req_speed = %d, req_flowctrl=%d\n",
 		  params->req_line_speed, params->req_flow_ctrl);
 	vars->link_status = 0;
+	vars->phy_link_up = 0;
+	vars->link_up = 0;
+	vars->line_speed = 0;
+	vars->duplex = DUPLEX_FULL;
+	vars->flow_ctrl = FLOW_CTRL_NONE;
+	vars->mac_type = MAC_TYPE_NONE;
+
 	if (params->switch_cfg ==  SWITCH_CFG_1G)
 		vars->phy_flags = PHY_SERDES_FLAG;
 	else
 		vars->phy_flags = PHY_XGXS_FLAG;
 
+
 	/* disable attentions */
 	bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4,
 		       (NIG_MASK_XGXS0_LINK_STATUS |
@@ -3894,6 +4089,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
 		}
 
 		bnx2x_link_initialize(params, vars);
+		msleep(30);
 		bnx2x_link_int_enable(params);
 	}
 	return 0;
@@ -3943,39 +4139,22 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars)
 			/* HW reset */
 
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-				       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+					  MISC_REGISTERS_GPIO_OUTPUT_LOW,
+					  port);
 
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+					  MISC_REGISTERS_GPIO_OUTPUT_LOW,
+					  port);
 
 			DP(NETIF_MSG_LINK, "reset external PHY\n");
-		} else {
-
-			u8 ext_phy_addr = ((ext_phy_config &
-					 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
-					 PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
-
-			/* SW reset */
-			bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_CTRL,
-				       1<<15);
-
-			/* Set Low Power Mode */
-			bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-				  MDIO_PMA_DEVAD,
-				  MDIO_PMA_REG_CTRL,
-				  1<<11);
-
-
-			if (ext_phy_type ==
-			    PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
-				DP(NETIF_MSG_LINK, "Setting 8073 port %d into"
+		} else if (ext_phy_type ==
+			   PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
+				DP(NETIF_MSG_LINK, "Setting 8073 port %d into "
 					 "low power mode\n",
 					 port);
 				bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-					MISC_REGISTERS_GPIO_OUTPUT_LOW);
-			}
+					MISC_REGISTERS_GPIO_OUTPUT_LOW,
+						  port);
 		}
 	}
 	/* reset the SerDes/XGXS */
@@ -3995,6 +4174,73 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars)
 	return 0;
 }
 
+static u8 bnx2x_update_link_down(struct link_params *params,
+			       struct link_vars *vars)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port);
+	bnx2x_set_led(bp, port, LED_MODE_OFF,
+		    0, params->hw_led_mode,
+		    params->chip_id);
+
+	/* indicate no mac active */
+	vars->mac_type = MAC_TYPE_NONE;
+
+	/* update shared memory */
+	vars->link_status = 0;
+	vars->line_speed = 0;
+	bnx2x_update_mng(params, vars->link_status);
+
+	/* activate nig drain */
+	REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+
+	/* reset BigMac */
+	bnx2x_bmac_rx_disable(bp, params->port);
+	REG_WR(bp, GRCBASE_MISC +
+		   MISC_REGISTERS_RESET_REG_2_CLEAR,
+		   (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+	return 0;
+}
+
+static u8 bnx2x_update_link_up(struct link_params *params,
+			     struct link_vars *vars,
+			     u8 link_10g, u32 gp_status)
+{
+	struct bnx2x *bp = params->bp;
+	u8 port = params->port;
+	u8 rc = 0;
+	vars->link_status |= LINK_STATUS_LINK_UP;
+	if (link_10g) {
+		bnx2x_bmac_enable(params, vars, 0);
+		bnx2x_set_led(bp, port, LED_MODE_OPER,
+			    SPEED_10000, params->hw_led_mode,
+			    params->chip_id);
+
+	} else {
+		bnx2x_emac_enable(params, vars, 0);
+		rc = bnx2x_emac_program(params, vars->line_speed,
+				      vars->duplex);
+
+		/* AN complete? */
+		if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
+			if (!(vars->phy_flags &
+			      PHY_SGMII_FLAG))
+				bnx2x_set_sgmii_tx_driver(params);
+		}
+	}
+
+	/* PBF - link up */
+	rc |= bnx2x_pbf_update(params, vars->flow_ctrl,
+			      vars->line_speed);
+
+	/* disable drain */
+	REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0);
+
+	/* update shared memory */
+	bnx2x_update_mng(params, vars->link_status);
+	return rc;
+}
 /* This function should called upon link interrupt */
 /* In case vars->link_up, driver needs to
 	1. Update the pbf
@@ -4012,10 +4258,10 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 {
 	struct bnx2x *bp = params->bp;
 	u8 port = params->port;
-	u16 i;
 	u16 gp_status;
-	u16 link_10g;
-	u8 rc = 0;
+	u8 link_10g;
+	u8 ext_phy_link_up, rc = 0;
+	u32 ext_phy_type;
 
 	DP(NETIF_MSG_LINK, "port %x, XGXS?%x, int_status 0x%x\n",
 	 port,
@@ -4031,15 +4277,16 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
 	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
 
+	ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
-	/* avoid fast toggling */
-	for (i = 0; i < 10; i++) {
-		msleep(10);
-		CL45_RD_OVER_CL22(bp, port, params->phy_addr,
-				      MDIO_REG_BANK_GP_STATUS,
-				      MDIO_GP_STATUS_TOP_AN_STATUS1,
-				      &gp_status);
-	}
+	/* Check external link change only for non-direct */
+	ext_phy_link_up = bnx2x_ext_phy_is_link_up(params, vars);
+
+	/* Read gp_status */
+	CL45_RD_OVER_CL22(bp, port, params->phy_addr,
+			      MDIO_REG_BANK_GP_STATUS,
+			      MDIO_GP_STATUS_TOP_AN_STATUS1,
+			      &gp_status);
 
 	rc = bnx2x_link_settings_status(params, vars, gp_status);
 	if (rc != 0)
@@ -4055,73 +4302,177 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 
 	bnx2x_link_int_ack(params, vars, link_10g);
 
+	/* In case external phy link is up, and internal link is down
+	( not initialized yet probably after link initialization, it needs
+	to be initialized.
+	Note that after link down-up as result of cable plug,
+	the xgxs link would probably become up again without the need to
+	initialize it*/
+
+	if ((ext_phy_type != PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
+	    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) &&
+	    (ext_phy_link_up && !vars->phy_link_up))
+		bnx2x_init_internal_phy(params, vars);
+
 	/* link is up only if both local phy and external phy are up */
-	vars->link_up = (vars->phy_link_up &&
-			   bnx2x_ext_phy_is_link_up(params, vars));
+	vars->link_up = (ext_phy_link_up && vars->phy_link_up);
 
-	if (!vars->phy_link_up &&
-	    REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18)) {
-		bnx2x_ext_phy_is_link_up(params, vars); /* Clear interrupt */
+	if (vars->link_up)
+		rc = bnx2x_update_link_up(params, vars, link_10g, gp_status);
+	else
+		rc = bnx2x_update_link_down(params, vars);
+
+	return rc;
+}
+
+static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+	u8 ext_phy_addr[PORT_MAX];
+	u16 val;
+	s8 port;
+
+	/* PART1 - Reset both phys */
+	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+		/* Extract the ext phy address for the port */
+		u32 ext_phy_config = REG_RD(bp, shmem_base +
+					offsetof(struct shmem_region,
+		   dev_info.port_hw_config[port].external_phy_config));
+
+		/* disable attentions */
+		bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+			     (NIG_MASK_XGXS0_LINK_STATUS |
+			      NIG_MASK_XGXS0_LINK10G |
+			      NIG_MASK_SERDES0_LINK_STATUS |
+			      NIG_MASK_MI_INT));
+
+		ext_phy_addr[port] =
+			((ext_phy_config &
+			      PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+			      PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+		/* Need to take the phy out of low power mode in order
+			to write to access its registers */
+		bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+				  MISC_REGISTERS_GPIO_OUTPUT_HIGH, port);
+
+		/* Reset the phy */
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			       ext_phy_addr[port],
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_CTRL,
+			       1<<15);
 	}
 
-	if (vars->link_up) {
-		vars->link_status |= LINK_STATUS_LINK_UP;
-		if (link_10g) {
-			bnx2x_bmac_enable(params, vars, 0);
-			bnx2x_set_led(bp, port, LED_MODE_OPER,
-				    SPEED_10000, params->hw_led_mode,
-				    params->chip_id);
+	/* Add delay of 150ms after reset */
+	msleep(150);
 
-		} else {
-			bnx2x_emac_enable(params, vars, 0);
-			rc = bnx2x_emac_program(params, vars->line_speed,
-					      vars->duplex);
+	/* PART2 - Download firmware to both phys */
+	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+		u16 fw_ver1;
 
-			/* AN complete? */
-			if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
-				if (!(vars->phy_flags &
-				      PHY_SGMII_FLAG))
-					bnx2x_set_sgmii_tx_driver(params);
-			}
+		bnx2x_bcm8073_external_rom_boot(bp, port,
+						      ext_phy_addr[port]);
+
+		bnx2x_cl45_read(bp, port, PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_ROM_VER1, &fw_ver1);
+		if (fw_ver1 == 0) {
+			DP(NETIF_MSG_LINK,
+				 "bnx2x_8073_common_init_phy port %x "
+				 "fw Download failed\n", port);
+			return -EINVAL;
 		}
 
-		/* PBF - link up */
-		rc |= bnx2x_pbf_update(params, vars->flow_ctrl,
-				      vars->line_speed);
+		/* Only set bit 10 = 1 (Tx power down) */
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_TX_POWER_DOWN, &val);
 
-		/* disable drain */
-		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 0);
+		/* Phase1 of TX_POWER_DOWN reset */
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			       ext_phy_addr[port],
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_TX_POWER_DOWN,
+			       (val | 1<<10));
+	}
 
-		/* update shared memory */
-		bnx2x_update_mng(params, vars->link_status);
+	/* Toggle Transmitter: Power down and then up with 600ms
+	   delay between */
+	msleep(600);
 
-	} else { /* link down */
-		DP(NETIF_MSG_LINK, "Port %x: Link is down\n", params->port);
-		bnx2x_set_led(bp, port, LED_MODE_OFF,
-			    0, params->hw_led_mode,
-			    params->chip_id);
+	/* PART3 - complete TX_POWER_DOWN process, and set GPIO2 back to low */
+	for (port = PORT_MAX - 1; port >= PORT_0; port--) {
+		/* Phase2 of POWER_DOWN_RESET*/
+		/* Release bit 10 (Release Tx power down) */
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_TX_POWER_DOWN, &val);
 
-		/* indicate no mac active */
-		vars->mac_type = MAC_TYPE_NONE;
+		bnx2x_cl45_write(bp, port,
+			       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			       ext_phy_addr[port],
+			       MDIO_PMA_DEVAD,
+			       MDIO_PMA_REG_TX_POWER_DOWN, (val & (~(1<<10))));
+		msleep(15);
 
-		/* update shared memory */
-		vars->link_status = 0;
-		bnx2x_update_mng(params, vars->link_status);
+		/* Read modify write the SPI-ROM version select register */
+		bnx2x_cl45_read(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_EDC_FFE_MAIN, &val);
+		bnx2x_cl45_write(bp, port,
+			      PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
+			      ext_phy_addr[port],
+			      MDIO_PMA_DEVAD,
+			      MDIO_PMA_REG_EDC_FFE_MAIN, (val | (1<<12)));
 
-		/* activate nig drain */
-		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+		/* set GPIO2 back to LOW */
+		bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
+				  MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+	}
+	return 0;
 
-		/* reset BigMac */
-		bnx2x_bmac_rx_disable(bp, params->port);
-		REG_WR(bp, GRCBASE_MISC +
-			   MISC_REGISTERS_RESET_REG_2_CLEAR,
-			   (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+}
 
+u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+	u8 rc = 0;
+	u32 ext_phy_type;
+
+	DP(NETIF_MSG_LINK, "bnx2x_common_init_phy\n");
+
+	/* Read the ext_phy_type for arbitrary port(0) */
+	ext_phy_type = XGXS_EXT_PHY_TYPE(
+			REG_RD(bp, shmem_base +
+			   offsetof(struct shmem_region,
+			     dev_info.port_hw_config[0].external_phy_config)));
+
+	switch (ext_phy_type) {
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
+	{
+		rc = bnx2x_8073_common_init_phy(bp, shmem_base);
+		break;
+	}
+	default:
+		DP(NETIF_MSG_LINK,
+			 "bnx2x_common_init_phy: ext_phy 0x%x not required\n",
+			 ext_phy_type);
+		break;
 	}
 
 	return rc;
 }
 
+
+
 static void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
 {
 	u16 val, cnt;
@@ -4154,7 +4505,7 @@ static void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr)
 }
 #define RESERVED_SIZE 256
 /* max application is 160K bytes - data at end of RAM */
-#define MAX_APP_SIZE 160*1024 - RESERVED_SIZE
+#define MAX_APP_SIZE (160*1024 - RESERVED_SIZE)
 
 /* Header is 14 bytes */
 #define HEADER_SIZE 14
@@ -4192,12 +4543,12 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
 		size = MAX_APP_SIZE+HEADER_SIZE;
 	}
 	DP(NETIF_MSG_LINK, "File version is %c%c\n", data[0x14e], data[0x14f]);
-	DP(NETIF_MSG_LINK, "                %c%c\n", data[0x150], data[0x151]);
+	DP(NETIF_MSG_LINK, "  	      %c%c\n", data[0x150], data[0x151]);
 	/* Put the DSP in download mode by setting FLASH_CFG[2] to 1
 	   and issuing a reset.*/
 
 	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
-			  MISC_REGISTERS_GPIO_HIGH);
+			  MISC_REGISTERS_GPIO_HIGH, port);
 
 	bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
 
@@ -4429,7 +4780,8 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
 	}
 
 	/* DSP Remove Download Mode */
-	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, MISC_REGISTERS_GPIO_LOW);
+	bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0,
+			  MISC_REGISTERS_GPIO_LOW, port);
 
 	bnx2x_sfx7101_sp_sw_reset(bp, port, ext_phy_addr);
 
@@ -4437,7 +4789,7 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
 	for (cnt = 0; cnt < 100; cnt++)
 		msleep(5);
 
-	bnx2x_hw_reset(bp);
+	bnx2x_hw_reset(bp, port);
 
 	for (cnt = 0; cnt < 100; cnt++)
 		msleep(5);
@@ -4473,7 +4825,7 @@ static u8 bnx2x_sfx7101_flash_download(struct bnx2x *bp, u8 port,
 		      MDIO_PMA_REG_7101_VER2,
 		      &image_revision2);
 
-	if (data[0x14e]	!= (image_revision2&0xFF) ||
+	if (data[0x14e] != (image_revision2&0xFF) ||
 	    data[0x14f] != ((image_revision2&0xFF00)>>8) ||
 	    data[0x150] != (image_revision1&0xFF) ||
 	    data[0x151] != ((image_revision1&0xFF00)>>8)) {
@@ -4508,11 +4860,11 @@ u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config,
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
 		/* Take ext phy out of reset */
 		if (!driver_loaded)
-			bnx2x_turn_on_sf(bp, port, ext_phy_addr);
+			bnx2x_turn_on_ef(bp, port, ext_phy_addr, ext_phy_type);
 		rc = bnx2x_sfx7101_flash_download(bp, port, ext_phy_addr,
 						data, size);
 		if (!driver_loaded)
-			bnx2x_turn_off_sf(bp);
+			bnx2x_turn_off_sf(bp, port);
 		break;
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h
index 714d37ac95d..86d54a17b41 100644
--- a/drivers/net/bnx2x_link.h
+++ b/drivers/net/bnx2x_link.h
@@ -55,14 +55,17 @@ struct link_params {
 #define LOOPBACK_BMAC	2
 #define LOOPBACK_XGXS_10	3
 #define LOOPBACK_EXT_PHY	4
+#define LOOPBACK_EXT 	5
 
 	u16 req_duplex;
 	u16 req_flow_ctrl;
+	u16 req_fc_auto_adv; /* Should be set to TX / BOTH when
+	req_flow_ctrl is set to AUTO */
 	u16 req_line_speed; /* Also determine AutoNeg */
 
 	/* Device parameters */
 	u8 mac_addr[6];
-	u16 mtu;
+
 
 
 	/* shmem parameters */
@@ -140,7 +143,7 @@ u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type,
 		  u8 phy_addr, u8 devad, u16 reg, u16 val);
 
 /* Reads the link_status from the shmem,
-   and update the link vars accordinaly */
+   and update the link vars accordingly */
 void bnx2x_link_status_update(struct link_params *input,
 			    struct link_vars *output);
 /* returns string representing the fw_version of the external phy */
@@ -149,7 +152,7 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 
 /* Set/Unset the led
    Basically, the CLC takes care of the led for the link, but in case one needs
-   to set/unset the led unnatually, set the "mode" to LED_MODE_OPER to
+   to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to
    blink the led, and LED_MODE_OFF to set the led off.*/
 u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
 	       u16 hw_led_mode, u32 chip_id);
@@ -164,5 +167,7 @@ u8 bnx2x_flash_download(struct bnx2x *bp, u8 port, u32 ext_phy_config,
 	otherwise link is down*/
 u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars);
 
+/* One-time initialization for external phy after power up */
+u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base);
 
 #endif /* BNX2X_LINK_H */
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 272a4bd2595..3e7dc171cdf 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -60,8 +60,8 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION      "1.45.6"
-#define DRV_MODULE_RELDATE      "2008/06/23"
+#define DRV_MODULE_VERSION      "1.45.17"
+#define DRV_MODULE_RELDATE      "2008/08/13"
 #define BNX2X_BC_VER		0x040200
 
 /* Time in jiffies before concluding the transmitter is hung */
@@ -76,23 +76,21 @@ MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
 
+static int disable_tpa;
 static int use_inta;
 static int poll;
 static int debug;
-static int disable_tpa;
-static int nomcp;
 static int load_count[3]; /* 0-common, 1-port0, 2-port1 */
 static int use_multi;
 
+module_param(disable_tpa, int, 0);
 module_param(use_inta, int, 0);
 module_param(poll, int, 0);
 module_param(debug, int, 0);
-module_param(disable_tpa, int, 0);
-module_param(nomcp, int, 0);
+MODULE_PARM_DESC(disable_tpa, "disable the TPA (LRO) feature");
 MODULE_PARM_DESC(use_inta, "use INT#A instead of MSI-X");
 MODULE_PARM_DESC(poll, "use polling (for debug)");
 MODULE_PARM_DESC(debug, "default debug msglevel");
-MODULE_PARM_DESC(nomcp, "ignore management CPU");
 
 #ifdef BNX2X_MULTI
 module_param(use_multi, int, 0);
@@ -237,17 +235,16 @@ void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
 	while (*wb_comp != DMAE_COMP_VAL) {
 		DP(BNX2X_MSG_OFF, "wb_comp 0x%08x\n", *wb_comp);
 
-		/* adjust delay for emulation/FPGA */
-		if (CHIP_REV_IS_SLOW(bp))
-			msleep(100);
-		else
-			udelay(5);
-
 		if (!cnt) {
 			BNX2X_ERR("dmae timeout!\n");
 			break;
 		}
 		cnt--;
+		/* adjust delay for emulation/FPGA */
+		if (CHIP_REV_IS_SLOW(bp))
+			msleep(100);
+		else
+			udelay(5);
 	}
 
 	mutex_unlock(&bp->dmae_mutex);
@@ -310,17 +307,16 @@ void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
 
 	while (*wb_comp != DMAE_COMP_VAL) {
 
-		/* adjust delay for emulation/FPGA */
-		if (CHIP_REV_IS_SLOW(bp))
-			msleep(100);
-		else
-			udelay(5);
-
 		if (!cnt) {
 			BNX2X_ERR("dmae timeout!\n");
 			break;
 		}
 		cnt--;
+		/* adjust delay for emulation/FPGA */
+		if (CHIP_REV_IS_SLOW(bp))
+			msleep(100);
+		else
+			udelay(5);
 	}
 	DP(BNX2X_MSG_OFF, "data [0x%08x 0x%08x 0x%08x 0x%08x]\n",
 	   bp->slowpath->wb_data[0], bp->slowpath->wb_data[1],
@@ -503,6 +499,9 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
 	int i;
 	u16 j, start, end;
 
+	bp->stats_state = STATS_STATE_DISABLED;
+	DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
+
 	BNX2X_ERR("begin crash dump -----------------\n");
 
 	for_each_queue(bp, i) {
@@ -513,17 +512,20 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
 			  "  tx_bd_prod(%x)  tx_bd_cons(%x)  *tx_cons_sb(%x)\n",
 			  i, fp->tx_pkt_prod, fp->tx_pkt_cons, fp->tx_bd_prod,
 			  fp->tx_bd_cons, le16_to_cpu(*fp->tx_cons_sb));
-		BNX2X_ERR("          rx_comp_prod(%x)  rx_comp_cons(%x)"
-			  "  *rx_cons_sb(%x)  *rx_bd_cons_sb(%x)"
-			  "  rx_sge_prod(%x)  last_max_sge(%x)\n",
-			  fp->rx_comp_prod, fp->rx_comp_cons,
-			  le16_to_cpu(*fp->rx_cons_sb),
-			  le16_to_cpu(*fp->rx_bd_cons_sb),
-			  fp->rx_sge_prod, fp->last_max_sge);
-		BNX2X_ERR("          fp_c_idx(%x)  fp_u_idx(%x)"
-			  "  bd data(%x,%x)  rx_alloc_failed(%lx)\n",
-			  fp->fp_c_idx, fp->fp_u_idx, hw_prods->packets_prod,
-			  hw_prods->bds_prod, fp->rx_alloc_failed);
+		BNX2X_ERR("          rx_bd_prod(%x)  rx_bd_cons(%x)"
+			  "  *rx_bd_cons_sb(%x)  rx_comp_prod(%x)"
+			  "  rx_comp_cons(%x)  *rx_cons_sb(%x)\n",
+			  fp->rx_bd_prod, fp->rx_bd_cons,
+			  le16_to_cpu(*fp->rx_bd_cons_sb), fp->rx_comp_prod,
+			  fp->rx_comp_cons, le16_to_cpu(*fp->rx_cons_sb));
+		BNX2X_ERR("          rx_sge_prod(%x)  last_max_sge(%x)"
+			  "  fp_c_idx(%x)  *sb_c_idx(%x)  fp_u_idx(%x)"
+			  "  *sb_u_idx(%x)  bd data(%x,%x)\n",
+			  fp->rx_sge_prod, fp->last_max_sge, fp->fp_c_idx,
+			  fp->status_blk->c_status_block.status_block_index,
+			  fp->fp_u_idx,
+			  fp->status_blk->u_status_block.status_block_index,
+			  hw_prods->packets_prod, hw_prods->bds_prod);
 
 		start = TX_BD(le16_to_cpu(*fp->tx_cons_sb) - 10);
 		end = TX_BD(le16_to_cpu(*fp->tx_cons_sb) + 245);
@@ -553,8 +555,8 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
 				  j, rx_bd[1], rx_bd[0], sw_bd->skb);
 		}
 
-		start = 0;
-		end = RX_SGE_CNT*NUM_RX_SGE_PAGES;
+		start = RX_SGE(fp->rx_sge_prod);
+		end = RX_SGE(fp->last_max_sge);
 		for (j = start; j < end; j++) {
 			u32 *rx_sge = (u32 *)&fp->rx_sge_ring[j];
 			struct sw_rx_page *sw_page = &fp->rx_page_ring[j];
@@ -582,9 +584,6 @@ static void bnx2x_panic_dump(struct bnx2x *bp)
 	bnx2x_fw_dump(bp);
 	bnx2x_mc_assert(bp);
 	BNX2X_ERR("end crash dump -----------------\n");
-
-	bp->stats_state = STATS_STATE_DISABLED;
-	DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n");
 }
 
 static void bnx2x_int_enable(struct bnx2x *bp)
@@ -684,7 +683,8 @@ static void bnx2x_int_disable_sync(struct bnx2x *bp)
 static inline void bnx2x_ack_sb(struct bnx2x *bp, u8 sb_id,
 				u8 storm, u16 index, u8 op, u8 update)
 {
-	u32 igu_addr = (IGU_ADDR_INT_ACK + IGU_FUNC_BASE * BP_FUNC(bp)) * 8;
+	u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 +
+		       COMMAND_REG_INT_ACK);
 	struct igu_ack_register igu_ack;
 
 	igu_ack.status_block_index = index;
@@ -694,9 +694,9 @@ static inline void bnx2x_ack_sb(struct bnx2x *bp, u8 sb_id,
 			 (update << IGU_ACK_REGISTER_UPDATE_INDEX_SHIFT) |
 			 (op << IGU_ACK_REGISTER_INTERRUPT_MODE_SHIFT));
 
-	DP(BNX2X_MSG_OFF, "write 0x%08x to IGU addr 0x%x\n",
-	   (*(u32 *)&igu_ack), BAR_IGU_INTMEM + igu_addr);
-	REG_WR(bp, BAR_IGU_INTMEM + igu_addr, (*(u32 *)&igu_ack));
+	DP(BNX2X_MSG_OFF, "write 0x%08x to HC addr 0x%x\n",
+	   (*(u32 *)&igu_ack), hc_addr);
+	REG_WR(bp, hc_addr, (*(u32 *)&igu_ack));
 }
 
 static inline u16 bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
@@ -716,36 +716,15 @@ static inline u16 bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
 	return rc;
 }
 
-static inline int bnx2x_has_work(struct bnx2x_fastpath *fp)
-{
-	u16 rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
-
-	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
-		rx_cons_sb++;
-
-	if ((fp->rx_comp_cons != rx_cons_sb) ||
-	    (fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) ||
-	    (fp->tx_pkt_prod != fp->tx_pkt_cons))
-		return 1;
-
-	return 0;
-}
-
 static u16 bnx2x_ack_int(struct bnx2x *bp)
 {
-	u32 igu_addr = (IGU_ADDR_SIMD_MASK + IGU_FUNC_BASE * BP_FUNC(bp)) * 8;
-	u32 result = REG_RD(bp, BAR_IGU_INTMEM + igu_addr);
+	u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 +
+		       COMMAND_REG_SIMD_MASK);
+	u32 result = REG_RD(bp, hc_addr);
 
-	DP(BNX2X_MSG_OFF, "read 0x%08x from IGU addr 0x%x\n",
-	   result, BAR_IGU_INTMEM + igu_addr);
+	DP(BNX2X_MSG_OFF, "read 0x%08x from HC addr 0x%x\n",
+	   result, hc_addr);
 
-#ifdef IGU_DEBUG
-#warning IGU_DEBUG active
-	if (result == 0) {
-		BNX2X_ERR("read %x from IGU\n", result);
-		REG_WR(bp, TM_REG_TIMER_SOFT_RST, 0);
-	}
-#endif
 	return result;
 }
 
@@ -898,6 +877,7 @@ static void bnx2x_tx_int(struct bnx2x_fastpath *fp, int work)
 		netif_tx_lock(bp->dev);
 
 		if (netif_queue_stopped(bp->dev) &&
+		    (bp->state == BNX2X_STATE_OPEN) &&
 		    (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3))
 			netif_wake_queue(bp->dev);
 
@@ -905,6 +885,7 @@ static void bnx2x_tx_int(struct bnx2x_fastpath *fp, int work)
 	}
 }
 
+
 static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
 			   union eth_rx_cqe *rr_cqe)
 {
@@ -960,6 +941,7 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
 		bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_CLOSED;
 		break;
 
+
 	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN):
 	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_DIAG):
 		DP(NETIF_MSG_IFUP, "got set mac ramrod\n");
@@ -1169,8 +1151,8 @@ static inline void bnx2x_init_sge_ring_bit_mask(struct bnx2x_fastpath *fp)
 	memset(fp->sge_mask, 0xff,
 	       (NUM_RX_SGE >> RX_SGE_MASK_ELEM_SHIFT)*sizeof(u64));
 
-	/* Clear the two last indeces in the page to 1:
-	   these are the indeces that correspond to the "next" element,
+	/* Clear the two last indices in the page to 1:
+	   these are the indices that correspond to the "next" element,
 	   hence will never be indicated and should be removed from
 	   the calculations. */
 	bnx2x_clear_sge_mask_next_elems(fp);
@@ -1261,7 +1243,7 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 		   where we are and drop the whole packet */
 		err = bnx2x_alloc_rx_sge(bp, fp, sge_idx);
 		if (unlikely(err)) {
-			fp->rx_alloc_failed++;
+			bp->eth_stats.rx_skb_alloc_failed++;
 			return err;
 		}
 
@@ -1297,14 +1279,13 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 	pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping),
 			 bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
 
-	/* if alloc failed drop the packet and keep the buffer in the bin */
 	if (likely(new_skb)) {
+		/* fix ip xsum and give it to the stack */
+		/* (no need to map the new skb) */
 
 		prefetch(skb);
 		prefetch(((char *)(skb)) + 128);
 
-		/* else fix ip xsum and give it to the stack */
-		/* (no need to map the new skb) */
 #ifdef BNX2X_STOP_ON_ERROR
 		if (pad + len > bp->rx_buf_size) {
 			BNX2X_ERR("skb_put is about to fail...  "
@@ -1353,9 +1334,10 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 		fp->tpa_pool[queue].skb = new_skb;
 
 	} else {
+		/* else drop the packet and keep the buffer in the bin */
 		DP(NETIF_MSG_RX_STATUS,
 		   "Failed to allocate new skb - dropping packet!\n");
-		fp->rx_alloc_failed++;
+		bp->eth_stats.rx_skb_alloc_failed++;
 	}
 
 	fp->tpa_state[queue] = BNX2X_TPA_STOP;
@@ -1390,7 +1372,6 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 	u16 bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
 	u16 hw_comp_cons, sw_comp_cons, sw_comp_prod;
 	int rx_pkt = 0;
-	u16 queue;
 
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
@@ -1456,7 +1437,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 			if ((!fp->disable_tpa) &&
 			    (TPA_TYPE(cqe_fp_flags) !=
 					(TPA_TYPE_START | TPA_TYPE_END))) {
-				queue = cqe->fast_path_cqe.queue_index;
+				u16 queue = cqe->fast_path_cqe.queue_index;
 
 				if (TPA_TYPE(cqe_fp_flags) == TPA_TYPE_START) {
 					DP(NETIF_MSG_RX_STATUS,
@@ -1503,11 +1484,10 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 
 			/* is this an error packet? */
 			if (unlikely(cqe_fp_flags & ETH_RX_ERROR_FALGS)) {
-			/* do we sometimes forward error packets anyway? */
 				DP(NETIF_MSG_RX_ERR,
 				   "ERROR  flags %x  rx packet %u\n",
 				   cqe_fp_flags, sw_comp_cons);
-				/* TBD make sure MC counts this as a drop */
+				bp->eth_stats.rx_err_discard_pkt++;
 				goto reuse_rx;
 			}
 
@@ -1524,7 +1504,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 					DP(NETIF_MSG_RX_ERR,
 					   "ERROR  packet dropped "
 					   "because of alloc failure\n");
-					fp->rx_alloc_failed++;
+					bp->eth_stats.rx_skb_alloc_failed++;
 					goto reuse_rx;
 				}
 
@@ -1550,7 +1530,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 				DP(NETIF_MSG_RX_ERR,
 				   "ERROR  packet dropped because "
 				   "of alloc failure\n");
-				fp->rx_alloc_failed++;
+				bp->eth_stats.rx_skb_alloc_failed++;
 reuse_rx:
 				bnx2x_reuse_rx_skb(fp, skb, bd_cons, bd_prod);
 				goto next_rx;
@@ -1559,10 +1539,12 @@ reuse_rx:
 			skb->protocol = eth_type_trans(skb, bp->dev);
 
 			skb->ip_summed = CHECKSUM_NONE;
-			if (bp->rx_csum && BNX2X_RX_SUM_OK(cqe))
-				skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-			/* TBD do we pass bad csum packets in promisc */
+			if (bp->rx_csum) {
+				if (likely(BNX2X_RX_CSUM_OK(cqe)))
+					skb->ip_summed = CHECKSUM_UNNECESSARY;
+				else
+					bp->eth_stats.hw_csum_err++;
+			}
 		}
 
 #ifdef BCM_VLAN
@@ -1615,6 +1597,12 @@ static irqreturn_t bnx2x_msix_fp_int(int irq, void *fp_cookie)
 	struct net_device *dev = bp->dev;
 	int index = FP_IDX(fp);
 
+	/* Return here if interrupt is disabled */
+	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
+		DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
+		return IRQ_HANDLED;
+	}
+
 	DP(BNX2X_MSG_FP, "got an MSI-X interrupt on IDX:SB [%d:%d]\n",
 	   index, FP_SB_ID(fp));
 	bnx2x_ack_sb(bp, FP_SB_ID(fp), USTORM_ID, 0, IGU_INT_DISABLE, 0);
@@ -1648,17 +1636,17 @@ static irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
 	}
 	DP(NETIF_MSG_INTR, "got an interrupt  status %u\n", status);
 
-#ifdef BNX2X_STOP_ON_ERROR
-	if (unlikely(bp->panic))
-		return IRQ_HANDLED;
-#endif
-
 	/* Return here if interrupt is disabled */
 	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
 		DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
 		return IRQ_HANDLED;
 	}
 
+#ifdef BNX2X_STOP_ON_ERROR
+	if (unlikely(bp->panic))
+		return IRQ_HANDLED;
+#endif
+
 	mask = 0x2 << bp->fp[0].sb_id;
 	if (status & mask) {
 		struct bnx2x_fastpath *fp = &bp->fp[0];
@@ -1699,11 +1687,12 @@ static void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event);
  * General service functions
  */
 
-static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
+static int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource)
 {
 	u32 lock_status;
 	u32 resource_bit = (1 << resource);
-	u8 port = BP_PORT(bp);
+	int func = BP_FUNC(bp);
+	u32 hw_lock_control_reg;
 	int cnt;
 
 	/* Validating that the resource is within range */
@@ -1714,8 +1703,15 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
 		return -EINVAL;
 	}
 
+	if (func <= 5) {
+		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
+	} else {
+		hw_lock_control_reg =
+				(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
+	}
+
 	/* Validating that the resource is not already taken */
-	lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
+	lock_status = REG_RD(bp, hw_lock_control_reg);
 	if (lock_status & resource_bit) {
 		DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
 		   lock_status, resource_bit);
@@ -1725,9 +1721,8 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
 	/* Try for 1 second every 5ms */
 	for (cnt = 0; cnt < 200; cnt++) {
 		/* Try to acquire the lock */
-		REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8 + 4,
-		       resource_bit);
-		lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
+		REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
+		lock_status = REG_RD(bp, hw_lock_control_reg);
 		if (lock_status & resource_bit)
 			return 0;
 
@@ -1737,11 +1732,12 @@ static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
 	return -EAGAIN;
 }
 
-static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
+static int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource)
 {
 	u32 lock_status;
 	u32 resource_bit = (1 << resource);
-	u8 port = BP_PORT(bp);
+	int func = BP_FUNC(bp);
+	u32 hw_lock_control_reg;
 
 	/* Validating that the resource is within range */
 	if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
@@ -1751,20 +1747,27 @@ static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
 		return -EINVAL;
 	}
 
+	if (func <= 5) {
+		hw_lock_control_reg = (MISC_REG_DRIVER_CONTROL_1 + func*8);
+	} else {
+		hw_lock_control_reg =
+				(MISC_REG_DRIVER_CONTROL_7 + (func - 6)*8);
+	}
+
 	/* Validating that the resource is currently taken */
-	lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + port*8);
+	lock_status = REG_RD(bp, hw_lock_control_reg);
 	if (!(lock_status & resource_bit)) {
 		DP(NETIF_MSG_HW, "lock_status 0x%x  resource_bit 0x%x\n",
 		   lock_status, resource_bit);
 		return -EFAULT;
 	}
 
-	REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + port*8, resource_bit);
+	REG_WR(bp, hw_lock_control_reg, resource_bit);
 	return 0;
 }
 
 /* HW Lock for shared dual port PHYs */
-static void bnx2x_phy_hw_lock(struct bnx2x *bp)
+static void bnx2x_acquire_phy_lock(struct bnx2x *bp)
 {
 	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
 
@@ -1772,25 +1775,25 @@ static void bnx2x_phy_hw_lock(struct bnx2x *bp)
 
 	if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
 	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
-		bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
 }
 
-static void bnx2x_phy_hw_unlock(struct bnx2x *bp)
+static void bnx2x_release_phy_lock(struct bnx2x *bp)
 {
 	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
 
 	if ((ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072) ||
 	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))
-		bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
 
 	mutex_unlock(&bp->port.phy_mutex);
 }
 
-int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
+int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port)
 {
 	/* The GPIO should be swapped if swap register is set and active */
 	int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
-			 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ BP_PORT(bp);
+			 REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ port;
 	int gpio_shift = gpio_num +
 			(gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
 	u32 gpio_mask = (1 << gpio_shift);
@@ -1801,7 +1804,7 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
 		return -EINVAL;
 	}
 
-	bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
 	/* read GPIO and mask except the float bits */
 	gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
 
@@ -1822,7 +1825,7 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
 		gpio_reg |=  (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
 		break;
 
-	case MISC_REGISTERS_GPIO_INPUT_HI_Z :
+	case MISC_REGISTERS_GPIO_INPUT_HI_Z:
 		DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n",
 		   gpio_num, gpio_shift);
 		/* set FLOAT */
@@ -1834,7 +1837,7 @@ int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
 	}
 
 	REG_WR(bp, MISC_REG_GPIO, gpio_reg);
-	bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
 
 	return 0;
 }
@@ -1850,19 +1853,19 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
 		return -EINVAL;
 	}
 
-	bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
 	/* read SPIO and mask except the float bits */
 	spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT);
 
 	switch (mode) {
-	case MISC_REGISTERS_SPIO_OUTPUT_LOW :
+	case MISC_REGISTERS_SPIO_OUTPUT_LOW:
 		DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num);
 		/* clear FLOAT and set CLR */
 		spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
 		spio_reg |=  (spio_mask << MISC_REGISTERS_SPIO_CLR_POS);
 		break;
 
-	case MISC_REGISTERS_SPIO_OUTPUT_HIGH :
+	case MISC_REGISTERS_SPIO_OUTPUT_HIGH:
 		DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num);
 		/* clear FLOAT and set SET */
 		spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
@@ -1880,7 +1883,7 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
 	}
 
 	REG_WR(bp, MISC_REG_SPIO, spio_reg);
-	bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
 
 	return 0;
 }
@@ -1940,46 +1943,63 @@ static void bnx2x_link_report(struct bnx2x *bp)
 
 static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
 {
-	u8 rc;
+	if (!BP_NOMCP(bp)) {
+		u8 rc;
 
-	/* Initialize link parameters structure variables */
-	bp->link_params.mtu = bp->dev->mtu;
+		/* Initialize link parameters structure variables */
+		/* It is recommended to turn off RX FC for jumbo frames
+		   for better performance */
+		if (IS_E1HMF(bp))
+			bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH;
+		else if (bp->dev->mtu > 5000)
+			bp->link_params.req_fc_auto_adv = FLOW_CTRL_TX;
+		else
+			bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH;
 
-	bnx2x_phy_hw_lock(bp);
-	rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+		bnx2x_acquire_phy_lock(bp);
+		rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+		bnx2x_release_phy_lock(bp);
 
-	if (bp->link_vars.link_up)
-		bnx2x_link_report(bp);
+		if (bp->link_vars.link_up)
+			bnx2x_link_report(bp);
 
-	bnx2x_calc_fc_adv(bp);
+		bnx2x_calc_fc_adv(bp);
 
-	return rc;
+		return rc;
+	}
+	BNX2X_ERR("Bootcode is missing -not initializing link\n");
+	return -EINVAL;
 }
 
 static void bnx2x_link_set(struct bnx2x *bp)
 {
-	bnx2x_phy_hw_lock(bp);
-	bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+	if (!BP_NOMCP(bp)) {
+		bnx2x_acquire_phy_lock(bp);
+		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
+		bnx2x_release_phy_lock(bp);
 
-	bnx2x_calc_fc_adv(bp);
+		bnx2x_calc_fc_adv(bp);
+	} else
+		BNX2X_ERR("Bootcode is missing -not setting link\n");
 }
 
 static void bnx2x__link_reset(struct bnx2x *bp)
 {
-	bnx2x_phy_hw_lock(bp);
-	bnx2x_link_reset(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+	if (!BP_NOMCP(bp)) {
+		bnx2x_acquire_phy_lock(bp);
+		bnx2x_link_reset(&bp->link_params, &bp->link_vars);
+		bnx2x_release_phy_lock(bp);
+	} else
+		BNX2X_ERR("Bootcode is missing -not resetting link\n");
 }
 
 static u8 bnx2x_link_test(struct bnx2x *bp)
 {
 	u8 rc;
 
-	bnx2x_phy_hw_lock(bp);
+	bnx2x_acquire_phy_lock(bp);
 	rc = bnx2x_test_link(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+	bnx2x_release_phy_lock(bp);
 
 	return rc;
 }
@@ -1991,7 +2011,7 @@ static u8 bnx2x_link_test(struct bnx2x *bp)
      sum of vn_min_rates
        or
      0 - if all the min_rates are 0.
-     In the later case fainess algorithm should be deactivated.
+     In the later case fairness algorithm should be deactivated.
      If not all min_rates are zero then those that are zeroes will
      be set to 1.
  */
@@ -2114,7 +2134,7 @@ static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func,
 				FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
 		/* If FAIRNESS is enabled (not all min rates are zeroes) and
 		   if current min rate is zero - set it to 1.
-		   This is a requirment of the algorithm. */
+		   This is a requirement of the algorithm. */
 		if ((vn_min_rate == 0) && wsum)
 			vn_min_rate = DEF_MIN_RATE;
 		vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
@@ -2203,9 +2223,9 @@ static void bnx2x_link_attn(struct bnx2x *bp)
 	/* Make sure that we are synced with the current statistics */
 	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-	bnx2x_phy_hw_lock(bp);
+	bnx2x_acquire_phy_lock(bp);
 	bnx2x_link_update(&bp->link_params, &bp->link_vars);
-	bnx2x_phy_hw_unlock(bp);
+	bnx2x_release_phy_lock(bp);
 
 	if (bp->link_vars.link_up) {
 
@@ -2357,7 +2377,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
 }
 
 /* acquire split MCP access lock register */
-static int bnx2x_lock_alr(struct bnx2x *bp)
+static int bnx2x_acquire_alr(struct bnx2x *bp)
 {
 	u32 i, j, val;
 	int rc = 0;
@@ -2374,15 +2394,15 @@ static int bnx2x_lock_alr(struct bnx2x *bp)
 		msleep(5);
 	}
 	if (!(val & (1L << 31))) {
-		BNX2X_ERR("Cannot acquire nvram interface\n");
+		BNX2X_ERR("Cannot acquire MCP access lock register\n");
 		rc = -EBUSY;
 	}
 
 	return rc;
 }
 
-/* Release split MCP access lock register */
-static void bnx2x_unlock_alr(struct bnx2x *bp)
+/* release split MCP access lock register */
+static void bnx2x_release_alr(struct bnx2x *bp)
 {
 	u32 val = 0;
 
@@ -2395,7 +2415,6 @@ static inline u16 bnx2x_update_dsb_idx(struct bnx2x *bp)
 	u16 rc = 0;
 
 	barrier(); /* status block is written to by the chip */
-
 	if (bp->def_att_idx != def_sb->atten_status_block.attn_bits_index) {
 		bp->def_att_idx = def_sb->atten_status_block.attn_bits_index;
 		rc |= 1;
@@ -2426,26 +2445,31 @@ static inline u16 bnx2x_update_dsb_idx(struct bnx2x *bp)
 static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 {
 	int port = BP_PORT(bp);
-	int func = BP_FUNC(bp);
-	u32 igu_addr = (IGU_ADDR_ATTN_BITS_SET + IGU_FUNC_BASE * func) * 8;
+	u32 hc_addr = (HC_REG_COMMAND_REG + port*32 +
+		       COMMAND_REG_ATTN_BITS_SET);
 	u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
 			      MISC_REG_AEU_MASK_ATTN_FUNC_0;
 	u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 :
 				       NIG_REG_MASK_INTERRUPT_PORT0;
+	u32 aeu_mask;
 
-	if (~bp->aeu_mask & (asserted & 0xff))
-		BNX2X_ERR("IGU ERROR\n");
 	if (bp->attn_state & asserted)
 		BNX2X_ERR("IGU ERROR\n");
 
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+	aeu_mask = REG_RD(bp, aeu_addr);
+
 	DP(NETIF_MSG_HW, "aeu_mask %x  newly asserted %x\n",
-	   bp->aeu_mask, asserted);
-	bp->aeu_mask &= ~(asserted & 0xff);
-	DP(NETIF_MSG_HW, "after masking: aeu_mask %x\n", bp->aeu_mask);
+	   aeu_mask, asserted);
+	aeu_mask &= ~(asserted & 0xff);
+	DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
 
-	REG_WR(bp, aeu_addr, bp->aeu_mask);
+	REG_WR(bp, aeu_addr, aeu_mask);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
 
+	DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
 	bp->attn_state |= asserted;
+	DP(NETIF_MSG_HW, "new state %x\n", bp->attn_state);
 
 	if (asserted & ATTN_HARD_WIRED_MASK) {
 		if (asserted & ATTN_NIG_FOR_FUNC) {
@@ -2500,9 +2524,9 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 
 	} /* if hardwired */
 
-	DP(NETIF_MSG_HW, "about to mask 0x%08x at IGU addr 0x%x\n",
-	   asserted, BAR_IGU_INTMEM + igu_addr);
-	REG_WR(bp, BAR_IGU_INTMEM + igu_addr, asserted);
+	DP(NETIF_MSG_HW, "about to mask 0x%08x at HC addr 0x%x\n",
+	   asserted, hc_addr);
+	REG_WR(bp, hc_addr, asserted);
 
 	/* now set back the mask */
 	if (asserted & ATTN_NIG_FOR_FUNC)
@@ -2530,12 +2554,12 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
 		case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
 			/* Fan failure attention */
 
-			/* The PHY reset is controled by GPIO 1 */
+			/* The PHY reset is controlled by GPIO 1 */
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
-				       MISC_REGISTERS_GPIO_OUTPUT_LOW);
-			/* Low power mode is controled by GPIO 2 */
+				       MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
+			/* Low power mode is controlled by GPIO 2 */
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
-				       MISC_REGISTERS_GPIO_OUTPUT_LOW);
+				       MISC_REGISTERS_GPIO_OUTPUT_LOW, port);
 			/* mark the failure */
 			bp->link_params.ext_phy_config &=
 					~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
@@ -2699,10 +2723,11 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
 	int index;
 	u32 reg_addr;
 	u32 val;
+	u32 aeu_mask;
 
 	/* need to take HW lock because MCP or other port might also
 	   try to handle this event */
-	bnx2x_lock_alr(bp);
+	bnx2x_acquire_alr(bp);
 
 	attn.sig[0] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 + port*4);
 	attn.sig[1] = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 + port*4);
@@ -2734,32 +2759,35 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
 						HW_PRTY_ASSERT_SET_1) ||
 			    (attn.sig[2] & group_mask.sig[2] &
 						HW_PRTY_ASSERT_SET_2))
-			       BNX2X_ERR("FATAL HW block parity attention\n");
+				BNX2X_ERR("FATAL HW block parity attention\n");
 		}
 	}
 
-	bnx2x_unlock_alr(bp);
+	bnx2x_release_alr(bp);
 
-	reg_addr = (IGU_ADDR_ATTN_BITS_CLR + IGU_FUNC_BASE * BP_FUNC(bp)) * 8;
+	reg_addr = (HC_REG_COMMAND_REG + port*32 + COMMAND_REG_ATTN_BITS_CLR);
 
 	val = ~deasserted;
-/*	DP(NETIF_MSG_INTR, "write 0x%08x to IGU addr 0x%x\n",
-	   val, BAR_IGU_INTMEM + reg_addr); */
-	REG_WR(bp, BAR_IGU_INTMEM + reg_addr, val);
+	DP(NETIF_MSG_HW, "about to mask 0x%08x at HC addr 0x%x\n",
+	   val, reg_addr);
+	REG_WR(bp, reg_addr, val);
 
-	if (bp->aeu_mask & (deasserted & 0xff))
-		BNX2X_ERR("IGU BUG!\n");
 	if (~bp->attn_state & deasserted)
-		BNX2X_ERR("IGU BUG!\n");
+		BNX2X_ERR("IGU ERROR\n");
 
 	reg_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
 			  MISC_REG_AEU_MASK_ATTN_FUNC_0;
 
-	DP(NETIF_MSG_HW, "aeu_mask %x\n", bp->aeu_mask);
-	bp->aeu_mask |= (deasserted & 0xff);
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
+	aeu_mask = REG_RD(bp, reg_addr);
+
+	DP(NETIF_MSG_HW, "aeu_mask %x  newly deasserted %x\n",
+	   aeu_mask, deasserted);
+	aeu_mask |= (deasserted & 0xff);
+	DP(NETIF_MSG_HW, "new mask %x\n", aeu_mask);
 
-	DP(NETIF_MSG_HW, "new mask %x\n", bp->aeu_mask);
-	REG_WR(bp, reg_addr, bp->aeu_mask);
+	REG_WR(bp, reg_addr, aeu_mask);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_PORT0_ATT_MASK + port);
 
 	DP(NETIF_MSG_HW, "attn_state %x\n", bp->attn_state);
 	bp->attn_state &= ~deasserted;
@@ -2800,7 +2828,7 @@ static void bnx2x_sp_task(struct work_struct *work)
 
 	/* Return here if interrupt is disabled */
 	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-		DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
+		DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
 		return;
 	}
 
@@ -2808,7 +2836,7 @@ static void bnx2x_sp_task(struct work_struct *work)
 /*	if (status == 0)				     */
 /*		BNX2X_ERR("spurious slowpath interrupt!\n"); */
 
-	DP(BNX2X_MSG_SP, "got a slowpath interrupt (updated %x)\n", status);
+	DP(NETIF_MSG_INTR, "got a slowpath interrupt (updated %x)\n", status);
 
 	/* HW attentions */
 	if (status & 0x1)
@@ -2838,7 +2866,7 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 
 	/* Return here if interrupt is disabled */
 	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-		DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n");
+		DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n");
 		return IRQ_HANDLED;
 	}
 
@@ -2876,11 +2904,11 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 			/* underflow */ \
 			d_hi = m_hi - s_hi; \
 			if (d_hi > 0) { \
-			/* we can 'loan' 1 */ \
+				/* we can 'loan' 1 */ \
 				d_hi--; \
 				d_lo = m_lo + (UINT_MAX - s_lo) + 1; \
 			} else { \
-			/* m_hi <= s_hi */ \
+				/* m_hi <= s_hi */ \
 				d_hi = 0; \
 				d_lo = 0; \
 			} \
@@ -2890,7 +2918,7 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 				d_hi = 0; \
 				d_lo = 0; \
 			} else { \
-			/* m_hi >= s_hi */ \
+				/* m_hi >= s_hi */ \
 				d_hi = m_hi - s_hi; \
 				d_lo = m_lo - s_lo; \
 			} \
@@ -2963,37 +2991,6 @@ static inline long bnx2x_hilo(u32 *hiref)
  * Init service functions
  */
 
-static void bnx2x_storm_stats_init(struct bnx2x *bp)
-{
-	int func = BP_FUNC(bp);
-
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func), 1);
-	REG_WR(bp, BAR_XSTRORM_INTMEM +
-	       XSTORM_STATS_FLAGS_OFFSET(func) + 4, 0);
-
-	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func), 1);
-	REG_WR(bp, BAR_TSTRORM_INTMEM +
-	       TSTORM_STATS_FLAGS_OFFSET(func) + 4, 0);
-
-	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func), 0);
-	REG_WR(bp, BAR_CSTRORM_INTMEM +
-	       CSTORM_STATS_FLAGS_OFFSET(func) + 4, 0);
-
-	REG_WR(bp, BAR_XSTRORM_INTMEM +
-	       XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
-	       U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
-	REG_WR(bp, BAR_XSTRORM_INTMEM +
-	       XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
-	       U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
-
-	REG_WR(bp, BAR_TSTRORM_INTMEM +
-	       TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
-	       U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
-	REG_WR(bp, BAR_TSTRORM_INTMEM +
-	       TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
-	       U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
-}
-
 static void bnx2x_storm_stats_post(struct bnx2x *bp)
 {
 	if (!bp->stats_pending) {
@@ -3032,6 +3029,8 @@ static void bnx2x_stats_init(struct bnx2x *bp)
 	memset(&(bp->port.old_nig_stats), 0, sizeof(struct nig_stats));
 	bp->port.old_nig_stats.brb_discard =
 			REG_RD(bp, NIG_REG_STAT0_BRB_DISCARD + port*0x38);
+	bp->port.old_nig_stats.brb_truncate =
+			REG_RD(bp, NIG_REG_STAT0_BRB_TRUNCATE + port*0x38);
 	REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT0 + port*0x50,
 		    &(bp->port.old_nig_stats.egress_mac_pkt0_lo), 2);
 	REG_RD_DMAE(bp, NIG_REG_STAT0_EGRESS_MAC_PKT1 + port*0x50,
@@ -3101,12 +3100,12 @@ static int bnx2x_stats_comp(struct bnx2x *bp)
 
 	might_sleep();
 	while (*stats_comp != DMAE_COMP_VAL) {
-		msleep(1);
 		if (!cnt) {
 			BNX2X_ERR("timeout waiting for stats finished\n");
 			break;
 		}
 		cnt--;
+		msleep(1);
 	}
 	return 1;
 }
@@ -3451,8 +3450,7 @@ static void bnx2x_bmac_stats_update(struct bnx2x *bp)
 	UPDATE_STAT64(rx_stat_grovr, rx_stat_dot3statsframestoolong);
 	UPDATE_STAT64(rx_stat_grfrg, rx_stat_etherstatsfragments);
 	UPDATE_STAT64(rx_stat_grjbr, rx_stat_etherstatsjabbers);
-	UPDATE_STAT64(rx_stat_grxpf, rx_stat_bmac_xpf);
-	UPDATE_STAT64(rx_stat_grxcf, rx_stat_bmac_xcf);
+	UPDATE_STAT64(rx_stat_grxcf, rx_stat_maccontrolframesreceived);
 	UPDATE_STAT64(rx_stat_grxpf, rx_stat_xoffstateentered);
 	UPDATE_STAT64(rx_stat_grxpf, rx_stat_xoffpauseframesreceived);
 	UPDATE_STAT64(tx_stat_gtxpf, tx_stat_outxoffsent);
@@ -3536,6 +3534,8 @@ static int bnx2x_hw_stats_update(struct bnx2x *bp)
 
 	ADD_EXTEND_64(pstats->brb_drop_hi, pstats->brb_drop_lo,
 		      new->brb_discard - old->brb_discard);
+	ADD_EXTEND_64(estats->brb_truncate_hi, estats->brb_truncate_lo,
+		      new->brb_truncate - old->brb_truncate);
 
 	UPDATE_STAT64_NIG(egress_mac_pkt0,
 					etherstatspkts1024octetsto1522octets);
@@ -3713,8 +3713,7 @@ static void bnx2x_net_stats_update(struct bnx2x *bp)
 	nstats->rx_length_errors =
 				estats->rx_stat_etherstatsundersizepkts_lo +
 				estats->jabber_packets_received;
-	nstats->rx_over_errors = estats->brb_drop_lo +
-				 estats->brb_truncate_discard;
+	nstats->rx_over_errors = estats->brb_drop_lo + estats->brb_truncate_lo;
 	nstats->rx_crc_errors = estats->rx_stat_dot3statsfcserrors_lo;
 	nstats->rx_frame_errors = estats->rx_stat_dot3statsalignmenterrors_lo;
 	nstats->rx_fifo_errors = old_tclient->no_buff_discard;
@@ -3783,7 +3782,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
 			     bp->fp->rx_comp_cons),
 		       le16_to_cpu(*bp->fp->rx_cons_sb), nstats->rx_packets);
 		printk(KERN_DEBUG "  %s (Xoff events %u)  brb drops %u\n",
-		       netif_queue_stopped(bp->dev)? "Xoff" : "Xon",
+		       netif_queue_stopped(bp->dev) ? "Xoff" : "Xon",
 		       estats->driver_xoff, estats->brb_drop_lo);
 		printk(KERN_DEBUG "tstats: checksum_discard %u  "
 			"packets_too_big_discard %u  no_buff_discard %u  "
@@ -3994,14 +3993,14 @@ static void bnx2x_zero_sb(struct bnx2x *bp, int sb_id)
 
 	bnx2x_init_fill(bp, BAR_USTRORM_INTMEM +
 			USTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
-			sizeof(struct ustorm_def_status_block)/4);
+			sizeof(struct ustorm_status_block)/4);
 	bnx2x_init_fill(bp, BAR_CSTRORM_INTMEM +
 			CSTORM_SB_HOST_STATUS_BLOCK_OFFSET(port, sb_id), 0,
-			sizeof(struct cstorm_def_status_block)/4);
+			sizeof(struct cstorm_status_block)/4);
 }
 
-static void bnx2x_init_sb(struct bnx2x *bp, int sb_id,
-			  struct host_status_block *sb,	dma_addr_t mapping)
+static void bnx2x_init_sb(struct bnx2x *bp, struct host_status_block *sb,
+			  dma_addr_t mapping, int sb_id)
 {
 	int port = BP_PORT(bp);
 	int func = BP_FUNC(bp);
@@ -4077,7 +4076,6 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    atten_status_block);
 	def_sb->atten_status_block.status_block_id = sb_id;
 
-	bp->def_att_idx = 0;
 	bp->attn_state = 0;
 
 	reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
@@ -4094,9 +4092,6 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					       reg_offset + 0xc + 0x10*index);
 	}
 
-	bp->aeu_mask = REG_RD(bp, (port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
-					  MISC_REG_AEU_MASK_ATTN_FUNC_0));
-
 	reg_offset = (port ? HC_REG_ATTN_MSG1_ADDR_L :
 			     HC_REG_ATTN_MSG0_ADDR_L);
 
@@ -4114,17 +4109,13 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    u_def_status_block);
 	def_sb->u_def_status_block.status_block_id = sb_id;
 
-	bp->def_u_idx = 0;
-
 	REG_WR(bp, BAR_USTRORM_INTMEM +
 	       USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
 	REG_WR(bp, BAR_USTRORM_INTMEM +
 	       ((USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
 	       U64_HI(section));
-	REG_WR8(bp, BAR_USTRORM_INTMEM +  DEF_USB_FUNC_OFF +
+	REG_WR8(bp, BAR_USTRORM_INTMEM + DEF_USB_FUNC_OFF +
 		USTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-	REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_HC_BTR_OFFSET(func),
-	       BNX2X_BTR);
 
 	for (index = 0; index < HC_USTORM_DEF_SB_NUM_INDICES; index++)
 		REG_WR16(bp, BAR_USTRORM_INTMEM +
@@ -4135,17 +4126,13 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    c_def_status_block);
 	def_sb->c_def_status_block.status_block_id = sb_id;
 
-	bp->def_c_idx = 0;
-
 	REG_WR(bp, BAR_CSTRORM_INTMEM +
 	       CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
 	REG_WR(bp, BAR_CSTRORM_INTMEM +
 	       ((CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
 	       U64_HI(section));
-	REG_WR8(bp, BAR_CSTRORM_INTMEM +  DEF_CSB_FUNC_OFF +
+	REG_WR8(bp, BAR_CSTRORM_INTMEM + DEF_CSB_FUNC_OFF +
 		CSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_HC_BTR_OFFSET(func),
-	       BNX2X_BTR);
 
 	for (index = 0; index < HC_CSTORM_DEF_SB_NUM_INDICES; index++)
 		REG_WR16(bp, BAR_CSTRORM_INTMEM +
@@ -4156,17 +4143,13 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    t_def_status_block);
 	def_sb->t_def_status_block.status_block_id = sb_id;
 
-	bp->def_t_idx = 0;
-
 	REG_WR(bp, BAR_TSTRORM_INTMEM +
 	       TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
 	REG_WR(bp, BAR_TSTRORM_INTMEM +
 	       ((TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
 	       U64_HI(section));
-	REG_WR8(bp, BAR_TSTRORM_INTMEM +  DEF_TSB_FUNC_OFF +
+	REG_WR8(bp, BAR_TSTRORM_INTMEM + DEF_TSB_FUNC_OFF +
 		TSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_HC_BTR_OFFSET(func),
-	       BNX2X_BTR);
 
 	for (index = 0; index < HC_TSTORM_DEF_SB_NUM_INDICES; index++)
 		REG_WR16(bp, BAR_TSTRORM_INTMEM +
@@ -4177,23 +4160,20 @@ static void bnx2x_init_def_sb(struct bnx2x *bp,
 					    x_def_status_block);
 	def_sb->x_def_status_block.status_block_id = sb_id;
 
-	bp->def_x_idx = 0;
-
 	REG_WR(bp, BAR_XSTRORM_INTMEM +
 	       XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func), U64_LO(section));
 	REG_WR(bp, BAR_XSTRORM_INTMEM +
 	       ((XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(func)) + 4),
 	       U64_HI(section));
-	REG_WR8(bp, BAR_XSTRORM_INTMEM +  DEF_XSB_FUNC_OFF +
+	REG_WR8(bp, BAR_XSTRORM_INTMEM + DEF_XSB_FUNC_OFF +
 		XSTORM_DEF_SB_HOST_STATUS_BLOCK_OFFSET(func), func);
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_HC_BTR_OFFSET(func),
-	       BNX2X_BTR);
 
 	for (index = 0; index < HC_XSTORM_DEF_SB_NUM_INDICES; index++)
 		REG_WR16(bp, BAR_XSTRORM_INTMEM +
 			 XSTORM_DEF_SB_HC_DISABLE_OFFSET(func, index), 1);
 
 	bp->stats_pending = 0;
+	bp->set_mac_pending = 0;
 
 	bnx2x_ack_sb(bp, sb_id, CSTORM_ID, 0, IGU_INT_ENABLE, 0);
 }
@@ -4209,21 +4189,25 @@ static void bnx2x_update_coalesce(struct bnx2x *bp)
 		/* HC_INDEX_U_ETH_RX_CQ_CONS */
 		REG_WR8(bp, BAR_USTRORM_INTMEM +
 			USTORM_SB_HC_TIMEOUT_OFFSET(port, sb_id,
-						   HC_INDEX_U_ETH_RX_CQ_CONS),
+						    U_SB_ETH_RX_CQ_INDEX),
 			bp->rx_ticks/12);
 		REG_WR16(bp, BAR_USTRORM_INTMEM +
 			 USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
-						   HC_INDEX_U_ETH_RX_CQ_CONS),
+						     U_SB_ETH_RX_CQ_INDEX),
+			 bp->rx_ticks ? 0 : 1);
+		REG_WR16(bp, BAR_USTRORM_INTMEM +
+			 USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
+						     U_SB_ETH_RX_BD_INDEX),
 			 bp->rx_ticks ? 0 : 1);
 
 		/* HC_INDEX_C_ETH_TX_CQ_CONS */
 		REG_WR8(bp, BAR_CSTRORM_INTMEM +
 			CSTORM_SB_HC_TIMEOUT_OFFSET(port, sb_id,
-						   HC_INDEX_C_ETH_TX_CQ_CONS),
+						    C_SB_ETH_TX_CQ_INDEX),
 			bp->tx_ticks/12);
 		REG_WR16(bp, BAR_CSTRORM_INTMEM +
 			 CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
-						   HC_INDEX_C_ETH_TX_CQ_CONS),
+						     C_SB_ETH_TX_CQ_INDEX),
 			 bp->tx_ticks ? 0 : 1);
 	}
 }
@@ -4256,7 +4240,9 @@ static inline void bnx2x_free_tpa_pool(struct bnx2x *bp,
 static void bnx2x_init_rx_rings(struct bnx2x *bp)
 {
 	int func = BP_FUNC(bp);
-	u16 ring_prod, cqe_ring_prod = 0;
+	int max_agg_queues = CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
+					      ETH_MAX_AGGREGATION_QUEUES_E1H;
+	u16 ring_prod, cqe_ring_prod;
 	int i, j;
 
 	bp->rx_buf_use_size = bp->dev->mtu;
@@ -4270,9 +4256,9 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
 		   bp->dev->mtu + ETH_OVREHEAD);
 
 		for_each_queue(bp, j) {
-			for (i = 0; i < ETH_MAX_AGGREGATION_QUEUES_E1H; i++) {
-				struct bnx2x_fastpath *fp = &bp->fp[j];
+			struct bnx2x_fastpath *fp = &bp->fp[j];
 
+			for (i = 0; i < max_agg_queues; i++) {
 				fp->tpa_pool[i].skb =
 				   netdev_alloc_skb(bp->dev, bp->rx_buf_size);
 				if (!fp->tpa_pool[i].skb) {
@@ -4352,8 +4338,7 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
 				BNX2X_ERR("disabling TPA for queue[%d]\n", j);
 				/* Cleanup already allocated elements */
 				bnx2x_free_rx_sge_range(bp, fp, ring_prod);
-				bnx2x_free_tpa_pool(bp, fp,
-					      ETH_MAX_AGGREGATION_QUEUES_E1H);
+				bnx2x_free_tpa_pool(bp, fp, max_agg_queues);
 				fp->disable_tpa = 1;
 				ring_prod = 0;
 				break;
@@ -4363,13 +4348,13 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
 		fp->rx_sge_prod = ring_prod;
 
 		/* Allocate BDs and initialize BD ring */
-		fp->rx_comp_cons = fp->rx_alloc_failed = 0;
+		fp->rx_comp_cons = 0;
 		cqe_ring_prod = ring_prod = 0;
 		for (i = 0; i < bp->rx_ring_size; i++) {
 			if (bnx2x_alloc_rx_skb(bp, fp, ring_prod) < 0) {
 				BNX2X_ERR("was only able to allocate "
 					  "%d rx skbs\n", i);
-				fp->rx_alloc_failed++;
+				bp->eth_stats.rx_skb_alloc_failed++;
 				break;
 			}
 			ring_prod = NEXT_RX_IDX(ring_prod);
@@ -4497,7 +4482,7 @@ static void bnx2x_init_context(struct bnx2x *bp)
 		}
 
 		context->cstorm_st_context.sb_index_number =
-						HC_INDEX_C_ETH_TX_CQ_CONS;
+						C_SB_ETH_TX_CQ_INDEX;
 		context->cstorm_st_context.status_block_id = sb_id;
 
 		context->xstorm_ag_context.cdu_reserved =
@@ -4535,7 +4520,7 @@ static void bnx2x_set_client_config(struct bnx2x *bp)
 	int i;
 
 	tstorm_client.mtu = bp->dev->mtu + ETH_OVREHEAD;
-	tstorm_client.statistics_counter_id = 0;
+	tstorm_client.statistics_counter_id = BP_CL_ID(bp);
 	tstorm_client.config_flags =
 				TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
 #ifdef BCM_VLAN
@@ -4579,7 +4564,7 @@ static void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
 	int func = BP_FUNC(bp);
 	int i;
 
-	DP(NETIF_MSG_RX_STATUS, "rx mode is %d\n", mode);
+	DP(NETIF_MSG_IFUP, "rx mode %d  mask 0x%x\n", mode, mask);
 
 	switch (mode) {
 	case BNX2X_RX_MODE_NONE: /* no Rx */
@@ -4617,13 +4602,35 @@ static void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
 		bnx2x_set_client_config(bp);
 }
 
-static void bnx2x_init_internal(struct bnx2x *bp)
+static void bnx2x_init_internal_common(struct bnx2x *bp)
+{
+	int i;
+
+	/* Zero this manually as its initialization is
+	   currently missing in the initTool */
+	for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
+		REG_WR(bp, BAR_USTRORM_INTMEM +
+		       USTORM_AGG_DATA_OFFSET + i * 4, 0);
+}
+
+static void bnx2x_init_internal_port(struct bnx2x *bp)
+{
+	int port = BP_PORT(bp);
+
+	REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_HC_BTR_OFFSET(port), BNX2X_BTR);
+}
+
+static void bnx2x_init_internal_func(struct bnx2x *bp)
 {
 	struct tstorm_eth_function_common_config tstorm_config = {0};
 	struct stats_indication_flags stats_flags = {0};
 	int port = BP_PORT(bp);
 	int func = BP_FUNC(bp);
 	int i;
+	u16 max_agg_size;
 
 	if (is_multi(bp)) {
 		tstorm_config.config_flags = MULTI_FLAGS;
@@ -4636,31 +4643,53 @@ static void bnx2x_init_internal(struct bnx2x *bp)
 	       TSTORM_FUNCTION_COMMON_CONFIG_OFFSET(func),
 	       (*(u32 *)&tstorm_config));
 
-/*	DP(NETIF_MSG_IFUP, "tstorm_config: 0x%08x\n",
-	   (*(u32 *)&tstorm_config)); */
-
 	bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */
 	bnx2x_set_storm_rx_mode(bp);
 
+	/* reset xstorm per client statistics */
+	for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++) {
+		REG_WR(bp, BAR_XSTRORM_INTMEM +
+		       XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, BP_CL_ID(bp)) +
+		       i*4, 0);
+	}
+	/* reset tstorm per client statistics */
+	for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++) {
+		REG_WR(bp, BAR_TSTRORM_INTMEM +
+		       TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, BP_CL_ID(bp)) +
+		       i*4, 0);
+	}
+
+	/* Init statistics related context */
 	stats_flags.collect_eth = 1;
 
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port),
+	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func),
 	       ((u32 *)&stats_flags)[0]);
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port) + 4,
+	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(func) + 4,
 	       ((u32 *)&stats_flags)[1]);
 
-	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(port),
+	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func),
 	       ((u32 *)&stats_flags)[0]);
-	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(port) + 4,
+	REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_STATS_FLAGS_OFFSET(func) + 4,
 	       ((u32 *)&stats_flags)[1]);
 
-	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(port),
+	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func),
 	       ((u32 *)&stats_flags)[0]);
-	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(port) + 4,
+	REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_STATS_FLAGS_OFFSET(func) + 4,
 	       ((u32 *)&stats_flags)[1]);
 
-/*	DP(NETIF_MSG_IFUP, "stats_flags: 0x%08x 0x%08x\n",
-	   ((u32 *)&stats_flags)[0], ((u32 *)&stats_flags)[1]); */
+	REG_WR(bp, BAR_XSTRORM_INTMEM +
+	       XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
+	       U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
+	REG_WR(bp, BAR_XSTRORM_INTMEM +
+	       XSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
+	       U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
+
+	REG_WR(bp, BAR_TSTRORM_INTMEM +
+	       TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func),
+	       U64_LO(bnx2x_sp_mapping(bp, fw_stats)));
+	REG_WR(bp, BAR_TSTRORM_INTMEM +
+	       TSTORM_ETH_STATS_QUERY_ADDR_OFFSET(func) + 4,
+	       U64_HI(bnx2x_sp_mapping(bp, fw_stats)));
 
 	if (CHIP_IS_E1H(bp)) {
 		REG_WR8(bp, BAR_XSTRORM_INTMEM + XSTORM_FUNCTION_MODE_OFFSET,
@@ -4676,15 +4705,12 @@ static void bnx2x_init_internal(struct bnx2x *bp)
 			 bp->e1hov);
 	}
 
-	/* Zero this manualy as its initialization is
-	   currently missing in the initTool */
-	for (i = 0; i < USTORM_AGG_DATA_SIZE >> 2; i++)
-		REG_WR(bp, BAR_USTRORM_INTMEM +
-		       USTORM_AGG_DATA_OFFSET + 4*i, 0);
-
+	/* Init CQ ring mapping and aggregation size */
+	max_agg_size = min((u32)(bp->rx_buf_use_size +
+				 8*BCM_PAGE_SIZE*PAGES_PER_SGE),
+			   (u32)0xffff);
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
-		u16 max_agg_size;
 
 		REG_WR(bp, BAR_USTRORM_INTMEM +
 		       USTORM_CQE_PAGE_BASE_OFFSET(port, FP_CL_ID(fp)),
@@ -4693,16 +4719,34 @@ static void bnx2x_init_internal(struct bnx2x *bp)
 		       USTORM_CQE_PAGE_BASE_OFFSET(port, FP_CL_ID(fp)) + 4,
 		       U64_HI(fp->rx_comp_mapping));
 
-		max_agg_size = min((u32)(bp->rx_buf_use_size +
-					 8*BCM_PAGE_SIZE*PAGES_PER_SGE),
-				   (u32)0xffff);
 		REG_WR16(bp, BAR_USTRORM_INTMEM +
 			 USTORM_MAX_AGG_SIZE_OFFSET(port, FP_CL_ID(fp)),
 			 max_agg_size);
 	}
 }
 
-static void bnx2x_nic_init(struct bnx2x *bp)
+static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code)
+{
+	switch (load_code) {
+	case FW_MSG_CODE_DRV_LOAD_COMMON:
+		bnx2x_init_internal_common(bp);
+		/* no break */
+
+	case FW_MSG_CODE_DRV_LOAD_PORT:
+		bnx2x_init_internal_port(bp);
+		/* no break */
+
+	case FW_MSG_CODE_DRV_LOAD_FUNCTION:
+		bnx2x_init_internal_func(bp);
+		break;
+
+	default:
+		BNX2X_ERR("Unknown load_code (0x%x) from MCP\n", load_code);
+		break;
+	}
+}
+
+static void bnx2x_nic_init(struct bnx2x *bp, u32 load_code)
 {
 	int i;
 
@@ -4717,19 +4761,20 @@ static void bnx2x_nic_init(struct bnx2x *bp)
 		DP(NETIF_MSG_IFUP,
 		   "bnx2x_init_sb(%p,%p) index %d  cl_id %d  sb %d\n",
 		   bp, fp->status_blk, i, FP_CL_ID(fp), FP_SB_ID(fp));
-		bnx2x_init_sb(bp, FP_SB_ID(fp), fp->status_blk,
-			      fp->status_blk_mapping);
+		bnx2x_init_sb(bp, fp->status_blk, fp->status_blk_mapping,
+			      FP_SB_ID(fp));
+		bnx2x_update_fpsb_idx(fp);
 	}
 
-	bnx2x_init_def_sb(bp, bp->def_status_blk,
-			  bp->def_status_blk_mapping, DEF_SB_ID);
+	bnx2x_init_def_sb(bp, bp->def_status_blk, bp->def_status_blk_mapping,
+			  DEF_SB_ID);
+	bnx2x_update_dsb_idx(bp);
 	bnx2x_update_coalesce(bp);
 	bnx2x_init_rx_rings(bp);
 	bnx2x_init_tx_ring(bp);
 	bnx2x_init_sp_ring(bp);
 	bnx2x_init_context(bp);
-	bnx2x_init_internal(bp);
-	bnx2x_storm_stats_init(bp);
+	bnx2x_init_internal(bp, load_code);
 	bnx2x_init_ind_table(bp);
 	bnx2x_int_enable(bp);
 }
@@ -4878,7 +4923,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
 	REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
 	REG_WR(bp, CFC_REG_DEBUG0, 0x1);
-	NIG_WR(NIG_REG_PRS_REQ_IN_EN, 0x0);
+	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
 
 	/*  Write 0 to parser credits for CFC search request */
 	REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
@@ -4933,7 +4978,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x0);
 	REG_WR(bp, TCM_REG_PRS_IFEN, 0x0);
 	REG_WR(bp, CFC_REG_DEBUG0, 0x1);
-	NIG_WR(NIG_REG_PRS_REQ_IN_EN, 0x0);
+	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x0);
 
 	/* Write 0 to parser credits for CFC search request */
 	REG_WR(bp, PRS_REG_CFC_SEARCH_INITIAL_CREDIT, 0x0);
@@ -5000,7 +5045,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
 	REG_WR(bp, TSDM_REG_ENABLE_IN1, 0x7fffffff);
 	REG_WR(bp, TCM_REG_PRS_IFEN, 0x1);
 	REG_WR(bp, CFC_REG_DEBUG0, 0x0);
-	NIG_WR(NIG_REG_PRS_REQ_IN_EN, 0x1);
+	REG_WR(bp, NIG_REG_PRS_REQ_IN_EN, 0x1);
 
 	DP(NETIF_MSG_HW, "done\n");
 
@@ -5089,11 +5134,6 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	REG_WR(bp, PXP2_REG_RD_CDURD_SWAP_MODE, 1);
 #endif
 
-#ifndef BCM_ISCSI
-		/* set NIC mode */
-		REG_WR(bp, PRS_REG_NIC_MODE, 1);
-#endif
-
 	REG_WR(bp, PXP2_REG_RQ_CDU_P_SIZE, 2);
 #ifdef BCM_ISCSI
 	REG_WR(bp, PXP2_REG_RQ_TM_P_SIZE, 5);
@@ -5163,6 +5203,8 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	}
 
 	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	/* set NIC mode */
+	REG_WR(bp, PRS_REG_NIC_MODE, 1);
 	if (CHIP_IS_E1H(bp))
 		REG_WR(bp, PRS_REG_E1HOV_MODE, IS_E1HMF(bp));
 
@@ -5333,6 +5375,13 @@ static int bnx2x_init_common(struct bnx2x *bp)
 		       ((u32 *)&tmp)[1]);
 	}
 
+	if (!BP_NOMCP(bp)) {
+		bnx2x_acquire_phy_lock(bp);
+		bnx2x_common_init_phy(bp, bp->common.shmem_base);
+		bnx2x_release_phy_lock(bp);
+	} else
+		BNX2X_ERR("Bootcode is missing - can not initialize link\n");
+
 	return 0;
 }
 
@@ -5638,18 +5687,23 @@ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
 	int func = BP_FUNC(bp);
 	u32 seq = ++bp->fw_seq;
 	u32 rc = 0;
+	u32 cnt = 1;
+	u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
 
 	SHMEM_WR(bp, func_mb[func].drv_mb_header, (command | seq));
 	DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
 
-	/* let the FW do it's magic ... */
-	msleep(100); /* TBD */
+	do {
+		/* let the FW do it's magic ... */
+		msleep(delay);
 
-	if (CHIP_REV_IS_SLOW(bp))
-		msleep(900);
+		rc = SHMEM_RD(bp, func_mb[func].fw_mb_header);
 
-	rc = SHMEM_RD(bp, func_mb[func].fw_mb_header);
-	DP(BNX2X_MSG_MCP, "read (%x) seq is (%x) from FW MB\n", rc, seq);
+		/* Give the FW up to 2 second (200*10ms) */
+	} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 200));
+
+	DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
+	   cnt*delay, rc, seq);
 
 	/* is this a reply to our command? */
 	if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
@@ -5713,6 +5767,7 @@ static void bnx2x_free_mem(struct bnx2x *bp)
 			       NUM_RCQ_BD);
 
 		/* SGE ring */
+		BNX2X_FREE(bnx2x_fp(bp, i, rx_page_ring));
 		BNX2X_PCI_FREE(bnx2x_fp(bp, i, rx_sge_ring),
 			       bnx2x_fp(bp, i, rx_sge_mapping),
 			       BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
@@ -5890,7 +5945,8 @@ static void bnx2x_free_rx_skbs(struct bnx2x *bp)
 			dev_kfree_skb(skb);
 		}
 		if (!fp->disable_tpa)
-			bnx2x_free_tpa_pool(bp, fp,
+			bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ?
+					    ETH_MAX_AGGREGATION_QUEUES_E1 :
 					    ETH_MAX_AGGREGATION_QUEUES_E1H);
 	}
 }
@@ -5976,8 +6032,8 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp)
 				 bnx2x_msix_fp_int, 0,
 				 bp->dev->name, &bp->fp[i]);
 		if (rc) {
-			BNX2X_ERR("request fp #%d irq failed  rc %d\n",
-				  i + offset, rc);
+			BNX2X_ERR("request fp #%d irq failed  rc -%d\n",
+				  i + offset, -rc);
 			bnx2x_free_msix_irqs(bp);
 			return -EBUSY;
 		}
@@ -6004,7 +6060,7 @@ static int bnx2x_req_irq(struct bnx2x *bp)
  * Init service functions
  */
 
-static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
+static void bnx2x_set_mac_addr_e1(struct bnx2x *bp, int set)
 {
 	struct mac_configuration_cmd *config = bnx2x_sp(bp, mac_config);
 	int port = BP_PORT(bp);
@@ -6026,11 +6082,15 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
 	config->config_table[0].cam_entry.lsb_mac_addr =
 					swab16(*(u16 *)&bp->dev->dev_addr[4]);
 	config->config_table[0].cam_entry.flags = cpu_to_le16(port);
-	config->config_table[0].target_table_entry.flags = 0;
+	if (set)
+		config->config_table[0].target_table_entry.flags = 0;
+	else
+		CAM_INVALIDATE(config->config_table[0]);
 	config->config_table[0].target_table_entry.client_id = 0;
 	config->config_table[0].target_table_entry.vlan_id = 0;
 
-	DP(NETIF_MSG_IFUP, "setting MAC (%04x:%04x:%04x)\n",
+	DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)\n",
+	   (set ? "setting" : "clearing"),
 	   config->config_table[0].cam_entry.msb_mac_addr,
 	   config->config_table[0].cam_entry.middle_mac_addr,
 	   config->config_table[0].cam_entry.lsb_mac_addr);
@@ -6040,8 +6100,11 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
 	config->config_table[1].cam_entry.middle_mac_addr = 0xffff;
 	config->config_table[1].cam_entry.lsb_mac_addr = 0xffff;
 	config->config_table[1].cam_entry.flags = cpu_to_le16(port);
-	config->config_table[1].target_table_entry.flags =
+	if (set)
+		config->config_table[1].target_table_entry.flags =
 				TSTORM_CAM_TARGET_TABLE_ENTRY_BROADCAST;
+	else
+		CAM_INVALIDATE(config->config_table[1]);
 	config->config_table[1].target_table_entry.client_id = 0;
 	config->config_table[1].target_table_entry.vlan_id = 0;
 
@@ -6050,12 +6113,12 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp)
 		      U64_LO(bnx2x_sp_mapping(bp, mac_config)), 0);
 }
 
-static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp)
+static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp, int set)
 {
 	struct mac_configuration_cmd_e1h *config =
 		(struct mac_configuration_cmd_e1h *)bnx2x_sp(bp, mac_config);
 
-	if (bp->state != BNX2X_STATE_OPEN) {
+	if (set && (bp->state != BNX2X_STATE_OPEN)) {
 		DP(NETIF_MSG_IFUP, "state is %x, returning\n", bp->state);
 		return;
 	}
@@ -6079,9 +6142,14 @@ static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp)
 	config->config_table[0].client_id = BP_L_ID(bp);
 	config->config_table[0].vlan_id = 0;
 	config->config_table[0].e1hov_id = cpu_to_le16(bp->e1hov);
-	config->config_table[0].flags = BP_PORT(bp);
+	if (set)
+		config->config_table[0].flags = BP_PORT(bp);
+	else
+		config->config_table[0].flags =
+				MAC_CONFIGURATION_ENTRY_E1H_ACTION_TYPE;
 
-	DP(NETIF_MSG_IFUP, "setting MAC (%04x:%04x:%04x)  E1HOV %d  CLID %d\n",
+	DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)  E1HOV %d  CLID %d\n",
+	   (set ? "setting" : "clearing"),
 	   config->config_table[0].msb_mac_addr,
 	   config->config_table[0].middle_mac_addr,
 	   config->config_table[0].lsb_mac_addr, bp->e1hov, BP_L_ID(bp));
@@ -6106,13 +6174,13 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx,
 			bnx2x_rx_int(bp->fp, 10);
 			/* if index is different from 0
 			 * the reply for some commands will
-			 * be on the none default queue
+			 * be on the non default queue
 			 */
 			if (idx)
 				bnx2x_rx_int(&bp->fp[idx], 10);
 		}
-		mb(); /* state is changed by bnx2x_sp_event() */
 
+		mb(); /* state is changed by bnx2x_sp_event() */
 		if (*state_p == state)
 			return 0;
 
@@ -6167,7 +6235,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 {
 	u32 load_code;
 	int i, rc;
-
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
 		return -EPERM;
@@ -6183,22 +6250,24 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	if (!BP_NOMCP(bp)) {
 		load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
 		if (!load_code) {
-			BNX2X_ERR("MCP response failure, unloading\n");
+			BNX2X_ERR("MCP response failure, aborting\n");
 			return -EBUSY;
 		}
 		if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED)
 			return -EBUSY; /* other port in diagnostic mode */
 
 	} else {
+		int port = BP_PORT(bp);
+
 		DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n",
 		   load_count[0], load_count[1], load_count[2]);
 		load_count[0]++;
-		load_count[1 + BP_PORT(bp)]++;
+		load_count[1 + port]++;
 		DP(NETIF_MSG_IFUP, "NO MCP new load counts       %d, %d, %d\n",
 		   load_count[0], load_count[1], load_count[2]);
 		if (load_count[0] == 1)
 			load_code = FW_MSG_CODE_DRV_LOAD_COMMON;
-		else if (load_count[1 + BP_PORT(bp)] == 1)
+		else if (load_count[1 + port] == 1)
 			load_code = FW_MSG_CODE_DRV_LOAD_PORT;
 		else
 			load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION;
@@ -6247,9 +6316,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		bnx2x_fp(bp, i, disable_tpa) =
 					((bp->flags & TPA_ENABLE_FLAG) == 0);
 
-	/* Disable interrupt handling until HW is initialized */
-	atomic_set(&bp->intr_sem, 1);
-
 	if (bp->flags & USING_MSIX_FLAG) {
 		rc = bnx2x_req_msix_irqs(bp);
 		if (rc) {
@@ -6276,17 +6342,14 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		goto load_error;
 	}
 
-	/* Enable interrupt handling */
-	atomic_set(&bp->intr_sem, 0);
-
 	/* Setup NIC internals and enable interrupts */
-	bnx2x_nic_init(bp);
+	bnx2x_nic_init(bp, load_code);
 
 	/* Send LOAD_DONE command to MCP */
 	if (!BP_NOMCP(bp)) {
 		load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
 		if (!load_code) {
-			BNX2X_ERR("MCP response failure, unloading\n");
+			BNX2X_ERR("MCP response failure, aborting\n");
 			rc = -EBUSY;
 			goto load_int_disable;
 		}
@@ -6301,11 +6364,12 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	for_each_queue(bp, i)
 		napi_enable(&bnx2x_fp(bp, i, napi));
 
+	/* Enable interrupt handling */
+	atomic_set(&bp->intr_sem, 0);
+
 	rc = bnx2x_setup_leading(bp);
 	if (rc) {
-#ifdef BNX2X_STOP_ON_ERROR
-		bp->panic = 1;
-#endif
+		BNX2X_ERR("Setup leading failed!\n");
 		goto load_stop_netif;
 	}
 
@@ -6323,9 +6387,9 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		}
 
 	if (CHIP_IS_E1(bp))
-		bnx2x_set_mac_addr_e1(bp);
+		bnx2x_set_mac_addr_e1(bp, 1);
 	else
-		bnx2x_set_mac_addr_e1h(bp);
+		bnx2x_set_mac_addr_e1h(bp, 1);
 
 	if (bp->port.pmf)
 		bnx2x_initial_phy_init(bp);
@@ -6339,7 +6403,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		break;
 
 	case LOAD_OPEN:
-		/* IRQ is only requested from bnx2x_open */
 		netif_start_queue(bp->dev);
 		bnx2x_set_rx_mode(bp->dev);
 		if (bp->flags & USING_MSIX_FLAG)
@@ -6378,8 +6441,7 @@ load_int_disable:
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
-		bnx2x_free_rx_sge_range(bp, bp->fp + i,
-					RX_SGE_CNT*NUM_RX_SGE_PAGES);
+		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
 load_error:
 	bnx2x_free_mem(bp);
 
@@ -6411,7 +6473,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index)
 	return rc;
 }
 
-static void bnx2x_stop_leading(struct bnx2x *bp)
+static int bnx2x_stop_leading(struct bnx2x *bp)
 {
 	u16 dsb_sp_prod_idx;
 	/* if the other port is handling traffic,
@@ -6429,7 +6491,7 @@ static void bnx2x_stop_leading(struct bnx2x *bp)
 	rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, 0,
 			       &(bp->fp[0].state), 1);
 	if (rc) /* timeout */
-		return;
+		return rc;
 
 	dsb_sp_prod_idx = *bp->dsb_sp_prod;
 
@@ -6441,20 +6503,24 @@ static void bnx2x_stop_leading(struct bnx2x *bp)
 	   so there is not much to do if this times out
 	 */
 	while (dsb_sp_prod_idx == *bp->dsb_sp_prod) {
-		msleep(1);
 		if (!cnt) {
 			DP(NETIF_MSG_IFDOWN, "timeout waiting for port del "
 			   "dsb_sp_prod 0x%x != dsb_sp_prod_idx 0x%x\n",
 			   *bp->dsb_sp_prod, dsb_sp_prod_idx);
 #ifdef BNX2X_STOP_ON_ERROR
 			bnx2x_panic();
+#else
+			rc = -EBUSY;
 #endif
 			break;
 		}
 		cnt--;
+		msleep(1);
 	}
 	bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
 	bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
+
+	return rc;
 }
 
 static void bnx2x_reset_func(struct bnx2x *bp)
@@ -6496,7 +6562,7 @@ static void bnx2x_reset_port(struct bnx2x *bp)
 	val = REG_RD(bp, BRB1_REG_PORT_NUM_OCC_BLOCKS_0 + port*4);
 	if (val)
 		DP(NETIF_MSG_IFDOWN,
-		   "BRB1 is not empty  %d blooks are occupied\n", val);
+		   "BRB1 is not empty  %d blocks are occupied\n", val);
 
 	/* TODO: Close Doorbell port? */
 }
@@ -6536,11 +6602,12 @@ static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
 	}
 }
 
-/* msut be called with rtnl_lock */
+/* must be called with rtnl_lock */
 static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 {
+	int port = BP_PORT(bp);
 	u32 reset_code = 0;
-	int i, cnt;
+	int i, cnt, rc;
 
 	bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
 
@@ -6557,22 +6624,17 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 		 (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq));
 	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-	/* Wait until all fast path tasks complete */
+	/* Wait until tx fast path tasks complete */
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
-#ifdef BNX2X_STOP_ON_ERROR
-#ifdef __powerpc64__
-		DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%lx\n",
-#else
-		DP(NETIF_MSG_IFDOWN, "fp->tpa_queue_used = 0x%llx\n",
-#endif
-		   fp->tpa_queue_used);
-#endif
 		cnt = 1000;
 		smp_rmb();
-		while (bnx2x_has_work(fp)) {
-			msleep(1);
+		while (BNX2X_HAS_TX_WORK(fp)) {
+
+			if (!netif_running(bp->dev))
+				bnx2x_tx_int(fp, 1000);
+
 			if (!cnt) {
 				BNX2X_ERR("timeout waiting for queue[%d]\n",
 					  i);
@@ -6584,14 +6646,13 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 #endif
 			}
 			cnt--;
+			msleep(1);
 			smp_rmb();
 		}
 	}
 
-	/* Wait until all slow path tasks complete */
-	cnt = 1000;
-	while ((bp->spq_left != MAX_SPQ_PENDING) && cnt--)
-		msleep(1);
+	/* Give HW time to discard old tx messages */
+	msleep(1);
 
 	for_each_queue(bp, i)
 		napi_disable(&bnx2x_fp(bp, i, napi));
@@ -6601,52 +6662,79 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 	/* Release IRQs */
 	bnx2x_free_irq(bp);
 
-	if (bp->flags & NO_WOL_FLAG)
+	if (unload_mode == UNLOAD_NORMAL)
+		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+
+	else if (bp->flags & NO_WOL_FLAG) {
 		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
+		if (CHIP_IS_E1H(bp))
+			REG_WR(bp, MISC_REG_E1HMF_MODE, 0);
 
-	else if (bp->wol) {
-		u32 emac_base = BP_PORT(bp) ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+	} else if (bp->wol) {
+		u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 		u8 *mac_addr = bp->dev->dev_addr;
 		u32 val;
-
 		/* The mac address is written to entries 1-4 to
 		   preserve entry 0 which is used by the PMF */
+		u8 entry = (BP_E1HVN(bp) + 1)*8;
+
 		val = (mac_addr[0] << 8) | mac_addr[1];
-		EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + (BP_E1HVN(bp) + 1)*8, val);
+		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
 
 		val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
 		      (mac_addr[4] << 8) | mac_addr[5];
-		EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + (BP_E1HVN(bp) + 1)*8 + 4,
-			val);
+		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
 
 		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
 
 	} else
 		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
 
+	if (CHIP_IS_E1(bp)) {
+		struct mac_configuration_cmd *config =
+						bnx2x_sp(bp, mcast_config);
+
+		bnx2x_set_mac_addr_e1(bp, 0);
+
+		for (i = 0; i < config->hdr.length_6b; i++)
+			CAM_INVALIDATE(config->config_table[i]);
+
+		config->hdr.length_6b = i;
+		if (CHIP_REV_IS_SLOW(bp))
+			config->hdr.offset = BNX2X_MAX_EMUL_MULTI*(1 + port);
+		else
+			config->hdr.offset = BNX2X_MAX_MULTICAST*(1 + port);
+		config->hdr.client_id = BP_CL_ID(bp);
+		config->hdr.reserved1 = 0;
+
+		bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
+			      U64_HI(bnx2x_sp_mapping(bp, mcast_config)),
+			      U64_LO(bnx2x_sp_mapping(bp, mcast_config)), 0);
+
+	} else { /* E1H */
+		bnx2x_set_mac_addr_e1h(bp, 0);
+
+		for (i = 0; i < MC_HASH_SIZE; i++)
+			REG_WR(bp, MC_HASH_OFFSET(bp, i), 0);
+	}
+
+	if (CHIP_IS_E1H(bp))
+		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
+
 	/* Close multi and leading connections
 	   Completions for ramrods are collected in a synchronous way */
 	for_each_nondefault_queue(bp, i)
 		if (bnx2x_stop_multi(bp, i))
 			goto unload_error;
 
-	if (CHIP_IS_E1H(bp))
-		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + BP_PORT(bp)*8, 0);
-
-	bnx2x_stop_leading(bp);
-#ifdef BNX2X_STOP_ON_ERROR
-	/* If ramrod completion timed out - break here! */
-	if (bp->panic) {
+	rc = bnx2x_stop_leading(bp);
+	if (rc) {
 		BNX2X_ERR("Stop leading failed!\n");
+#ifdef BNX2X_STOP_ON_ERROR
 		return -EBUSY;
-	}
+#else
+		goto unload_error;
 #endif
-
-	if ((bp->state != BNX2X_STATE_CLOSING_WAIT4_UNLOAD) ||
-	    (bp->fp[0].state != BNX2X_FP_STATE_CLOSED)) {
-		DP(NETIF_MSG_IFDOWN, "failed to close leading properly!  "
-		   "state 0x%x  fp[0].state 0x%x\n",
-		   bp->state, bp->fp[0].state);
 	}
 
 unload_error:
@@ -6656,12 +6744,12 @@ unload_error:
 		DP(NETIF_MSG_IFDOWN, "NO MCP load counts      %d, %d, %d\n",
 		   load_count[0], load_count[1], load_count[2]);
 		load_count[0]--;
-		load_count[1 + BP_PORT(bp)]--;
+		load_count[1 + port]--;
 		DP(NETIF_MSG_IFDOWN, "NO MCP new load counts  %d, %d, %d\n",
 		   load_count[0], load_count[1], load_count[2]);
 		if (load_count[0] == 0)
 			reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON;
-		else if (load_count[1 + BP_PORT(bp)] == 0)
+		else if (load_count[1 + port] == 0)
 			reset_code = FW_MSG_CODE_DRV_UNLOAD_PORT;
 		else
 			reset_code = FW_MSG_CODE_DRV_UNLOAD_FUNCTION;
@@ -6681,8 +6769,7 @@ unload_error:
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
-		bnx2x_free_rx_sge_range(bp, bp->fp + i,
-					RX_SGE_CNT*NUM_RX_SGE_PAGES);
+		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
 	bnx2x_free_mem(bp);
 
 	bp->state = BNX2X_STATE_CLOSED;
@@ -6733,56 +6820,93 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
 		/* Check if it is the UNDI driver
 		 * UNDI driver initializes CID offset for normal bell to 0x7
 		 */
+		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
 		val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
 		if (val == 0x7) {
 			u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
-			/* save our func and fw_seq */
+			/* save our func */
 			int func = BP_FUNC(bp);
-			u16 fw_seq = bp->fw_seq;
+			u32 swap_en;
+			u32 swap_val;
 
 			BNX2X_DEV_INFO("UNDI is active! reset device\n");
 
 			/* try unload UNDI on port 0 */
 			bp->func = 0;
-			bp->fw_seq = (SHMEM_RD(bp,
-					     func_mb[bp->func].drv_mb_header) &
-				      DRV_MSG_SEQ_NUMBER_MASK);
-
+			bp->fw_seq =
+			       (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
+				DRV_MSG_SEQ_NUMBER_MASK);
 			reset_code = bnx2x_fw_command(bp, reset_code);
-			bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
 
 			/* if UNDI is loaded on the other port */
 			if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) {
 
+				/* send "DONE" for previous unload */
+				bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+
+				/* unload UNDI on port 1 */
 				bp->func = 1;
-				bp->fw_seq = (SHMEM_RD(bp,
-					     func_mb[bp->func].drv_mb_header) &
-					      DRV_MSG_SEQ_NUMBER_MASK);
-
-				bnx2x_fw_command(bp,
-					     DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS);
-				bnx2x_fw_command(bp,
-						 DRV_MSG_CODE_UNLOAD_DONE);
-
-				/* restore our func and fw_seq */
-				bp->func = func;
-				bp->fw_seq = fw_seq;
+				bp->fw_seq =
+			       (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
+					DRV_MSG_SEQ_NUMBER_MASK);
+				reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+
+				bnx2x_fw_command(bp, reset_code);
 			}
 
+			REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 :
+				    HC_REG_CONFIG_0), 0x1000);
+
+			/* close input traffic and wait for it */
+			/* Do not rcv packets to BRB */
+			REG_WR(bp,
+			      (BP_PORT(bp) ? NIG_REG_LLH1_BRB1_DRV_MASK :
+					     NIG_REG_LLH0_BRB1_DRV_MASK), 0x0);
+			/* Do not direct rcv packets that are not for MCP to
+			 * the BRB */
+			REG_WR(bp,
+			       (BP_PORT(bp) ? NIG_REG_LLH1_BRB1_NOT_MCP :
+					      NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
+			/* clear AEU */
+			REG_WR(bp,
+			     (BP_PORT(bp) ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
+					    MISC_REG_AEU_MASK_ATTN_FUNC_0), 0);
+			msleep(10);
+
+			/* save NIG port swap info */
+			swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
+			swap_en = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
 			/* reset device */
 			REG_WR(bp,
 			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
-			       0xd3ffff7f);
+			       0xd3ffffff);
 			REG_WR(bp,
 			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
 			       0x1403);
+			/* take the NIG out of reset and restore swap values */
+			REG_WR(bp,
+			       GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+			       MISC_REGISTERS_RESET_REG_1_RST_NIG);
+			REG_WR(bp, NIG_REG_PORT_SWAP, swap_val);
+			REG_WR(bp, NIG_REG_STRAP_OVERRIDE, swap_en);
+
+			/* send unload done to the MCP */
+			bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+
+			/* restore our func and fw_seq */
+			bp->func = func;
+			bp->fw_seq =
+			       (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
+				DRV_MSG_SEQ_NUMBER_MASK);
 		}
+		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
 	}
 }
 
 static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
 {
 	u32 val, val2, val3, val4, id;
+	u16 pmc;
 
 	/* Get the chip revision id and number. */
 	/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
@@ -6840,8 +6964,16 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
 		BNX2X_ERR("This driver needs bc_ver %X but found %X,"
 			  " please upgrade BC\n", BNX2X_BC_VER, val);
 	}
-	BNX2X_DEV_INFO("%sWoL Capable\n",
-		       (bp->flags & NO_WOL_FLAG)? "Not " : "");
+
+	if (BP_E1HVN(bp) == 0) {
+		pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc);
+		bp->flags |= (pmc & PCI_PM_CAP_PME_D3cold) ? 0 : NO_WOL_FLAG;
+	} else {
+		/* no WOL capability for E1HVN != 0 */
+		bp->flags |= NO_WOL_FLAG;
+	}
+	BNX2X_DEV_INFO("%sWoL capable\n",
+		       (bp->flags & NO_WOL_FLAG) ? "Not " : "");
 
 	val = SHMEM_RD(bp, dev_info.shared_hw_config.part_num);
 	val2 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[4]);
@@ -7274,9 +7406,8 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 		bp->mf_config =
 			SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
 
-		val =
-		   (SHMEM_RD(bp, mf_cfg.func_mf_config[func].e1hov_tag) &
-		    FUNC_MF_CFG_E1HOV_TAG_MASK);
+		val = (SHMEM_RD(bp, mf_cfg.func_mf_config[func].e1hov_tag) &
+		       FUNC_MF_CFG_E1HOV_TAG_MASK);
 		if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
 
 			bp->e1hov = val;
@@ -7324,7 +7455,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 
 	if (BP_NOMCP(bp)) {
 		/* only supposed to happen on emulation/FPGA */
-		BNX2X_ERR("warning rendom MAC workaround active\n");
+		BNX2X_ERR("warning random MAC workaround active\n");
 		random_ether_addr(bp->dev->dev_addr);
 		memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
 	}
@@ -7337,8 +7468,8 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 	int func = BP_FUNC(bp);
 	int rc;
 
-	if (nomcp)
-		bp->flags |= NO_MCP_FLAG;
+	/* Disable interrupt handling until HW is initialized */
+	atomic_set(&bp->intr_sem, 1);
 
 	mutex_init(&bp->port.phy_mutex);
 
@@ -7377,8 +7508,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 	bp->tx_ticks = 50;
 	bp->rx_ticks = 25;
 
-	bp->stats_ticks = 1000000 & 0xffff00;
-
 	bp->timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
 	bp->current_interval = (poll ? poll : bp->timer_interval);
 
@@ -7628,25 +7757,25 @@ static void bnx2x_get_drvinfo(struct net_device *dev,
 			      struct ethtool_drvinfo *info)
 {
 	struct bnx2x *bp = netdev_priv(dev);
-	char phy_fw_ver[PHY_FW_VER_LEN];
+	u8 phy_fw_ver[PHY_FW_VER_LEN];
 
 	strcpy(info->driver, DRV_MODULE_NAME);
 	strcpy(info->version, DRV_MODULE_VERSION);
 
 	phy_fw_ver[0] = '\0';
 	if (bp->port.pmf) {
-		bnx2x_phy_hw_lock(bp);
+		bnx2x_acquire_phy_lock(bp);
 		bnx2x_get_ext_phy_fw_version(&bp->link_params,
 					     (bp->state != BNX2X_STATE_CLOSED),
 					     phy_fw_ver, PHY_FW_VER_LEN);
-		bnx2x_phy_hw_unlock(bp);
+		bnx2x_release_phy_lock(bp);
 	}
 
-	snprintf(info->fw_version, 32, "%d.%d.%d:%d BC:%x%s%s",
-		 BCM_5710_FW_MAJOR_VERSION, BCM_5710_FW_MINOR_VERSION,
-		 BCM_5710_FW_REVISION_VERSION,
-		 BCM_5710_FW_COMPILE_FLAGS, bp->common.bc_ver,
-		 ((phy_fw_ver[0] != '\0')? " PHY:":""), phy_fw_ver);
+	snprintf(info->fw_version, 32, "BC:%d.%d.%d%s%s",
+		 (bp->common.bc_ver & 0xff0000) >> 16,
+		 (bp->common.bc_ver & 0xff00) >> 8,
+		 (bp->common.bc_ver & 0xff),
+		 ((phy_fw_ver[0] != '\0') ? " PHY:" : ""), phy_fw_ver);
 	strcpy(info->bus_info, pci_name(bp->pdev));
 	info->n_stats = BNX2X_NUM_STATS;
 	info->testinfo_len = BNX2X_NUM_TESTS;
@@ -8097,7 +8226,7 @@ static int bnx2x_set_eeprom(struct net_device *dev,
 	if (eeprom->magic == 0x00504859)
 		if (bp->port.pmf) {
 
-			bnx2x_phy_hw_lock(bp);
+			bnx2x_acquire_phy_lock(bp);
 			rc = bnx2x_flash_download(bp, BP_PORT(bp),
 					     bp->link_params.ext_phy_config,
 					     (bp->state != BNX2X_STATE_CLOSED),
@@ -8109,7 +8238,7 @@ static int bnx2x_set_eeprom(struct net_device *dev,
 				rc |= bnx2x_phy_init(&bp->link_params,
 						     &bp->link_vars);
 			}
-			bnx2x_phy_hw_unlock(bp);
+			bnx2x_release_phy_lock(bp);
 
 		} else /* Only the PMF can access the PHY */
 			return -EINVAL;
@@ -8128,7 +8257,6 @@ static int bnx2x_get_coalesce(struct net_device *dev,
 
 	coal->rx_coalesce_usecs = bp->rx_ticks;
 	coal->tx_coalesce_usecs = bp->tx_ticks;
-	coal->stats_block_coalesce_usecs = bp->stats_ticks;
 
 	return 0;
 }
@@ -8146,44 +8274,12 @@ static int bnx2x_set_coalesce(struct net_device *dev,
 	if (bp->tx_ticks > 0x3000)
 		bp->tx_ticks = 0x3000;
 
-	bp->stats_ticks = coal->stats_block_coalesce_usecs;
-	if (bp->stats_ticks > 0xffff00)
-		bp->stats_ticks = 0xffff00;
-	bp->stats_ticks &= 0xffff00;
-
 	if (netif_running(dev))
 		bnx2x_update_coalesce(bp);
 
 	return 0;
 }
 
-static int bnx2x_set_flags(struct net_device *dev, u32 data)
-{
-	struct bnx2x *bp = netdev_priv(dev);
-	int changed = 0;
-	int rc = 0;
-
-	if (data & ETH_FLAG_LRO) {
-		if (!(dev->features & NETIF_F_LRO)) {
-			dev->features |= NETIF_F_LRO;
-			bp->flags |= TPA_ENABLE_FLAG;
-			changed = 1;
-		}
-
-	} else if (dev->features & NETIF_F_LRO) {
-		dev->features &= ~NETIF_F_LRO;
-		bp->flags &= ~TPA_ENABLE_FLAG;
-		changed = 1;
-	}
-
-	if (changed && netif_running(dev)) {
-		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
-		rc = bnx2x_nic_load(bp, LOAD_NORMAL);
-	}
-
-	return rc;
-}
-
 static void bnx2x_get_ringparam(struct net_device *dev,
 				struct ethtool_ringparam *ering)
 {
@@ -8266,7 +8362,7 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
 
 	if (epause->autoneg) {
 		if (!(bp->port.supported & SUPPORTED_Autoneg)) {
-			DP(NETIF_MSG_LINK, "Autoneg not supported\n");
+			DP(NETIF_MSG_LINK, "autoneg not supported\n");
 			return -EINVAL;
 		}
 
@@ -8285,6 +8381,34 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
 	return 0;
 }
 
+static int bnx2x_set_flags(struct net_device *dev, u32 data)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	int changed = 0;
+	int rc = 0;
+
+	/* TPA requires Rx CSUM offloading */
+	if ((data & ETH_FLAG_LRO) && bp->rx_csum) {
+		if (!(dev->features & NETIF_F_LRO)) {
+			dev->features |= NETIF_F_LRO;
+			bp->flags |= TPA_ENABLE_FLAG;
+			changed = 1;
+		}
+
+	} else if (dev->features & NETIF_F_LRO) {
+		dev->features &= ~NETIF_F_LRO;
+		bp->flags &= ~TPA_ENABLE_FLAG;
+		changed = 1;
+	}
+
+	if (changed && netif_running(dev)) {
+		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+		rc = bnx2x_nic_load(bp, LOAD_NORMAL);
+	}
+
+	return rc;
+}
+
 static u32 bnx2x_get_rx_csum(struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -8295,9 +8419,19 @@ static u32 bnx2x_get_rx_csum(struct net_device *dev)
 static int bnx2x_set_rx_csum(struct net_device *dev, u32 data)
 {
 	struct bnx2x *bp = netdev_priv(dev);
+	int rc = 0;
 
 	bp->rx_csum = data;
-	return 0;
+
+	/* Disable TPA, when Rx CSUM is disabled. Otherwise all
+	   TPA'ed packets will be discarded due to wrong TCP CSUM */
+	if (!data) {
+		u32 flags = ethtool_op_get_flags(dev);
+
+		rc = bnx2x_set_flags(dev, (flags & ~ETH_FLAG_LRO));
+	}
+
+	return rc;
 }
 
 static int bnx2x_set_tso(struct net_device *dev, u32 data)
@@ -8335,6 +8469,7 @@ static int bnx2x_test_registers(struct bnx2x *bp)
 {
 	int idx, i, rc = -ENODEV;
 	u32 wr_val = 0;
+	int port = BP_PORT(bp);
 	static const struct {
 		u32  offset0;
 		u32  offset1;
@@ -8400,7 +8535,6 @@ static int bnx2x_test_registers(struct bnx2x *bp)
 
 		for (i = 0; reg_tbl[i].offset0 != 0xffffffff; i++) {
 			u32 offset, mask, save_val, val;
-			int port = BP_PORT(bp);
 
 			offset = reg_tbl[i].offset0 + port*reg_tbl[i].offset1;
 			mask = reg_tbl[i].mask;
@@ -8446,16 +8580,17 @@ static int bnx2x_test_memory(struct bnx2x *bp)
 	static const struct {
 		char *name;
 		u32 offset;
-		u32 mask;
+		u32 e1_mask;
+		u32 e1h_mask;
 	} prty_tbl[] = {
-		{ "CCM_REG_CCM_PRTY_STS",     CCM_REG_CCM_PRTY_STS,     0 },
-		{ "CFC_REG_CFC_PRTY_STS",     CFC_REG_CFC_PRTY_STS,     0 },
-		{ "DMAE_REG_DMAE_PRTY_STS",   DMAE_REG_DMAE_PRTY_STS,   0 },
-		{ "TCM_REG_TCM_PRTY_STS",     TCM_REG_TCM_PRTY_STS,     0 },
-		{ "UCM_REG_UCM_PRTY_STS",     UCM_REG_UCM_PRTY_STS,     0 },
-		{ "XCM_REG_XCM_PRTY_STS",     XCM_REG_XCM_PRTY_STS,     0x1 },
-
-		{ NULL, 0xffffffff, 0 }
+		{ "CCM_PRTY_STS",  CCM_REG_CCM_PRTY_STS,   0x3ffc0, 0 },
+		{ "CFC_PRTY_STS",  CFC_REG_CFC_PRTY_STS,   0x2,     0x2 },
+		{ "DMAE_PRTY_STS", DMAE_REG_DMAE_PRTY_STS, 0,       0 },
+		{ "TCM_PRTY_STS",  TCM_REG_TCM_PRTY_STS,   0x3ffc0, 0 },
+		{ "UCM_PRTY_STS",  UCM_REG_UCM_PRTY_STS,   0x3ffc0, 0 },
+		{ "XCM_PRTY_STS",  XCM_REG_XCM_PRTY_STS,   0x3ffc1, 0 },
+
+		{ NULL, 0xffffffff, 0, 0 }
 	};
 
 	if (!netif_running(bp->dev))
@@ -8469,7 +8604,8 @@ static int bnx2x_test_memory(struct bnx2x *bp)
 	/* Check the parity status */
 	for (i = 0; prty_tbl[i].offset != 0xffffffff; i++) {
 		val = REG_RD(bp, prty_tbl[i].offset);
-		if (val & ~(prty_tbl[i].mask)) {
+		if ((CHIP_IS_E1(bp) && (val & ~(prty_tbl[i].e1_mask))) ||
+		    (CHIP_IS_E1H(bp) && (val & ~(prty_tbl[i].e1h_mask)))) {
 			DP(NETIF_MSG_HW,
 			   "%s is 0x%x\n", prty_tbl[i].name, val);
 			goto test_mem_exit;
@@ -8539,15 +8675,15 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up)
 
 	if (loopback_mode == BNX2X_MAC_LOOPBACK) {
 		bp->link_params.loopback_mode = LOOPBACK_BMAC;
-		bnx2x_phy_hw_lock(bp);
+		bnx2x_acquire_phy_lock(bp);
 		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-		bnx2x_phy_hw_unlock(bp);
+		bnx2x_release_phy_lock(bp);
 
 	} else if (loopback_mode == BNX2X_PHY_LOOPBACK) {
 		bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
-		bnx2x_phy_hw_lock(bp);
+		bnx2x_acquire_phy_lock(bp);
 		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-		bnx2x_phy_hw_unlock(bp);
+		bnx2x_release_phy_lock(bp);
 		/* wait until link state is restored */
 		bnx2x_wait_for_link(bp, link_up);
 
@@ -8771,7 +8907,7 @@ static void bnx2x_self_test(struct net_device *dev,
 	if (!netif_running(dev))
 		return;
 
-	/* offline tests are not suppoerted in MF mode */
+	/* offline tests are not supported in MF mode */
 	if (IS_E1HMF(bp))
 		etest->flags &= ~ETH_TEST_FL_OFFLINE;
 
@@ -8827,76 +8963,99 @@ static const struct {
 	long offset;
 	int size;
 	u32 flags;
-	char string[ETH_GSTRING_LEN];
+#define STATS_FLAGS_PORT		1
+#define STATS_FLAGS_FUNC		2
+	u8 string[ETH_GSTRING_LEN];
 } bnx2x_stats_arr[BNX2X_NUM_STATS] = {
-/* 1 */	{ STATS_OFFSET32(valid_bytes_received_hi),     8, 1, "rx_bytes" },
-	{ STATS_OFFSET32(error_bytes_received_hi),     8, 1, "rx_error_bytes" },
-	{ STATS_OFFSET32(total_bytes_transmitted_hi),  8, 1, "tx_bytes" },
-	{ STATS_OFFSET32(tx_stat_ifhcoutbadoctets_hi), 8, 0, "tx_error_bytes" },
+/* 1 */	{ STATS_OFFSET32(valid_bytes_received_hi),
+				8, STATS_FLAGS_FUNC, "rx_bytes" },
+	{ STATS_OFFSET32(error_bytes_received_hi),
+				8, STATS_FLAGS_FUNC, "rx_error_bytes" },
+	{ STATS_OFFSET32(total_bytes_transmitted_hi),
+				8, STATS_FLAGS_FUNC, "tx_bytes" },
+	{ STATS_OFFSET32(tx_stat_ifhcoutbadoctets_hi),
+				8, STATS_FLAGS_PORT, "tx_error_bytes" },
 	{ STATS_OFFSET32(total_unicast_packets_received_hi),
-						8, 1, "rx_ucast_packets" },
+				8, STATS_FLAGS_FUNC, "rx_ucast_packets" },
 	{ STATS_OFFSET32(total_multicast_packets_received_hi),
-						8, 1, "rx_mcast_packets" },
+				8, STATS_FLAGS_FUNC, "rx_mcast_packets" },
 	{ STATS_OFFSET32(total_broadcast_packets_received_hi),
-						8, 1, "rx_bcast_packets" },
+				8, STATS_FLAGS_FUNC, "rx_bcast_packets" },
 	{ STATS_OFFSET32(total_unicast_packets_transmitted_hi),
-						8, 1, "tx_packets" },
+				8, STATS_FLAGS_FUNC, "tx_packets" },
 	{ STATS_OFFSET32(tx_stat_dot3statsinternalmactransmiterrors_hi),
-						8, 0, "tx_mac_errors" },
+				8, STATS_FLAGS_PORT, "tx_mac_errors" },
 /* 10 */{ STATS_OFFSET32(rx_stat_dot3statscarriersenseerrors_hi),
-						8, 0, "tx_carrier_errors" },
+				8, STATS_FLAGS_PORT, "tx_carrier_errors" },
 	{ STATS_OFFSET32(rx_stat_dot3statsfcserrors_hi),
-						8, 0, "rx_crc_errors" },
+				8, STATS_FLAGS_PORT, "rx_crc_errors" },
 	{ STATS_OFFSET32(rx_stat_dot3statsalignmenterrors_hi),
-						8, 0, "rx_align_errors" },
+				8, STATS_FLAGS_PORT, "rx_align_errors" },
 	{ STATS_OFFSET32(tx_stat_dot3statssinglecollisionframes_hi),
-						8, 0, "tx_single_collisions" },
+				8, STATS_FLAGS_PORT, "tx_single_collisions" },
 	{ STATS_OFFSET32(tx_stat_dot3statsmultiplecollisionframes_hi),
-						8, 0, "tx_multi_collisions" },
+				8, STATS_FLAGS_PORT, "tx_multi_collisions" },
 	{ STATS_OFFSET32(tx_stat_dot3statsdeferredtransmissions_hi),
-						8, 0, "tx_deferred" },
+				8, STATS_FLAGS_PORT, "tx_deferred" },
 	{ STATS_OFFSET32(tx_stat_dot3statsexcessivecollisions_hi),
-						8, 0, "tx_excess_collisions" },
+				8, STATS_FLAGS_PORT, "tx_excess_collisions" },
 	{ STATS_OFFSET32(tx_stat_dot3statslatecollisions_hi),
-						8, 0, "tx_late_collisions" },
+				8, STATS_FLAGS_PORT, "tx_late_collisions" },
 	{ STATS_OFFSET32(tx_stat_etherstatscollisions_hi),
-						8, 0, "tx_total_collisions" },
+				8, STATS_FLAGS_PORT, "tx_total_collisions" },
 	{ STATS_OFFSET32(rx_stat_etherstatsfragments_hi),
-						8, 0, "rx_fragments" },
-/* 20 */{ STATS_OFFSET32(rx_stat_etherstatsjabbers_hi), 8, 0, "rx_jabbers" },
+				8, STATS_FLAGS_PORT, "rx_fragments" },
+/* 20 */{ STATS_OFFSET32(rx_stat_etherstatsjabbers_hi),
+				8, STATS_FLAGS_PORT, "rx_jabbers" },
 	{ STATS_OFFSET32(rx_stat_etherstatsundersizepkts_hi),
-						8, 0, "rx_undersize_packets" },
+				8, STATS_FLAGS_PORT, "rx_undersize_packets" },
 	{ STATS_OFFSET32(jabber_packets_received),
-						4, 1, "rx_oversize_packets" },
+				4, STATS_FLAGS_FUNC, "rx_oversize_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts64octets_hi),
-						8, 0, "tx_64_byte_packets" },
+				8, STATS_FLAGS_PORT, "tx_64_byte_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts65octetsto127octets_hi),
-					8, 0, "tx_65_to_127_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_65_to_127_byte_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts128octetsto255octets_hi),
-					8, 0, "tx_128_to_255_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_128_to_255_byte_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts256octetsto511octets_hi),
-					8, 0, "tx_256_to_511_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_256_to_511_byte_packets" },
 	{ STATS_OFFSET32(tx_stat_etherstatspkts512octetsto1023octets_hi),
-					8, 0, "tx_512_to_1023_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_512_to_1023_byte_packets" },
 	{ STATS_OFFSET32(etherstatspkts1024octetsto1522octets_hi),
-					8, 0, "tx_1024_to_1522_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_1024_to_1522_byte_packets" },
 	{ STATS_OFFSET32(etherstatspktsover1522octets_hi),
-					8, 0, "tx_1523_to_9022_byte_packets" },
+			8, STATS_FLAGS_PORT, "tx_1523_to_9022_byte_packets" },
 /* 30 */{ STATS_OFFSET32(rx_stat_xonpauseframesreceived_hi),
-						8, 0, "rx_xon_frames" },
+				8, STATS_FLAGS_PORT, "rx_xon_frames" },
 	{ STATS_OFFSET32(rx_stat_xoffpauseframesreceived_hi),
-						8, 0, "rx_xoff_frames" },
-	{ STATS_OFFSET32(tx_stat_outxonsent_hi),  8, 0, "tx_xon_frames" },
-	{ STATS_OFFSET32(tx_stat_outxoffsent_hi), 8, 0, "tx_xoff_frames" },
+				8, STATS_FLAGS_PORT, "rx_xoff_frames" },
+	{ STATS_OFFSET32(tx_stat_outxonsent_hi),
+				8, STATS_FLAGS_PORT, "tx_xon_frames" },
+	{ STATS_OFFSET32(tx_stat_outxoffsent_hi),
+				8, STATS_FLAGS_PORT, "tx_xoff_frames" },
 	{ STATS_OFFSET32(rx_stat_maccontrolframesreceived_hi),
-						8, 0, "rx_mac_ctrl_frames" },
-	{ STATS_OFFSET32(mac_filter_discard),   4, 1, "rx_filtered_packets" },
-	{ STATS_OFFSET32(no_buff_discard),      4, 1, "rx_discards" },
-	{ STATS_OFFSET32(xxoverflow_discard),   4, 1, "rx_fw_discards" },
-	{ STATS_OFFSET32(brb_drop_hi),          8, 1, "brb_discard" },
-/* 39 */{ STATS_OFFSET32(brb_truncate_discard), 8, 1, "brb_truncate" }
+				8, STATS_FLAGS_PORT, "rx_mac_ctrl_frames" },
+	{ STATS_OFFSET32(mac_filter_discard),
+				4, STATS_FLAGS_PORT, "rx_filtered_packets" },
+	{ STATS_OFFSET32(no_buff_discard),
+				4, STATS_FLAGS_FUNC, "rx_discards" },
+	{ STATS_OFFSET32(xxoverflow_discard),
+				4, STATS_FLAGS_PORT, "rx_fw_discards" },
+	{ STATS_OFFSET32(brb_drop_hi),
+				8, STATS_FLAGS_PORT, "brb_discard" },
+	{ STATS_OFFSET32(brb_truncate_hi),
+				8, STATS_FLAGS_PORT, "brb_truncate" },
+/* 40 */{ STATS_OFFSET32(rx_err_discard_pkt),
+				4, STATS_FLAGS_FUNC, "rx_phy_ip_err_discards"},
+	{ STATS_OFFSET32(rx_skb_alloc_failed),
+				4, STATS_FLAGS_FUNC, "rx_skb_alloc_discard" },
+/* 42 */{ STATS_OFFSET32(hw_csum_err),
+				4, STATS_FLAGS_FUNC, "rx_csum_offload_errors" }
 };
 
+#define IS_NOT_E1HMF_STAT(bp, i) \
+		(IS_E1HMF(bp) && (bnx2x_stats_arr[i].flags & STATS_FLAGS_PORT))
+
 static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -8905,7 +9064,7 @@ static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 	switch (stringset) {
 	case ETH_SS_STATS:
 		for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
-			if (IS_E1HMF(bp) && (!bnx2x_stats_arr[i].flags))
+			if (IS_NOT_E1HMF_STAT(bp, i))
 				continue;
 			strcpy(buf + j*ETH_GSTRING_LEN,
 			       bnx2x_stats_arr[i].string);
@@ -8925,7 +9084,7 @@ static int bnx2x_get_stats_count(struct net_device *dev)
 	int i, num_stats = 0;
 
 	for (i = 0; i < BNX2X_NUM_STATS; i++) {
-		if (IS_E1HMF(bp) && (!bnx2x_stats_arr[i].flags))
+		if (IS_NOT_E1HMF_STAT(bp, i))
 			continue;
 		num_stats++;
 	}
@@ -8940,7 +9099,7 @@ static void bnx2x_get_ethtool_stats(struct net_device *dev,
 	int i, j;
 
 	for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) {
-		if (IS_E1HMF(bp) && (!bnx2x_stats_arr[i].flags))
+		if (IS_NOT_E1HMF_STAT(bp, i))
 			continue;
 
 		if (bnx2x_stats_arr[i].size == 0) {
@@ -9057,7 +9216,7 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state)
 				       PCI_PM_CTRL_PME_STATUS));
 
 		if (pmcsr & PCI_PM_CTRL_STATE_MASK)
-		/* delay required during transition out of D3hot */
+			/* delay required during transition out of D3hot */
 			msleep(20);
 		break;
 
@@ -9104,17 +9263,16 @@ static int bnx2x_poll(struct napi_struct *napi, int budget)
 
 	bnx2x_update_fpsb_idx(fp);
 
-	if ((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) ||
-	    (fp->tx_pkt_prod != fp->tx_pkt_cons))
+	if (BNX2X_HAS_TX_WORK(fp))
 		bnx2x_tx_int(fp, budget);
 
-	if (le16_to_cpu(*fp->rx_cons_sb) != fp->rx_comp_cons)
+	if (BNX2X_HAS_RX_WORK(fp))
 		work_done = bnx2x_rx_int(fp, budget);
 
-	rmb(); /* bnx2x_has_work() reads the status block */
+	rmb(); /* BNX2X_HAS_WORK() reads the status block */
 
 	/* must not complete if we consumed full budget */
-	if ((work_done < budget) && !bnx2x_has_work(fp)) {
+	if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) {
 
 #ifdef BNX2X_STOP_ON_ERROR
 poll_panic:
@@ -9131,7 +9289,7 @@ poll_panic:
 
 
 /* we split the first BD into headers and data BDs
- * to ease the pain of our fellow micocode engineers
+ * to ease the pain of our fellow microcode engineers
  * we use one mapping for both BDs
  * So far this has only been observed to happen
  * in Other Operating Systems(TM)
@@ -9238,7 +9396,7 @@ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
 			/* Check if LSO packet needs to be copied:
 			   3 = 1 (for headers BD) + 2 (for PBD and last BD) */
 			int wnd_size = MAX_FETCH_BD - 3;
-			/* Number of widnows to check */
+			/* Number of windows to check */
 			int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size;
 			int wnd_idx = 0;
 			int frag_idx = 0;
@@ -9340,7 +9498,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	   skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
 	   ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
 
-	/* First, check if we need to linearaize the skb
+	/* First, check if we need to linearize the skb
 	   (due to FW restrictions) */
 	if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
 		/* Statistics of linearization */
@@ -9349,7 +9507,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			DP(NETIF_MSG_TX_QUEUED, "SKB linearization failed - "
 			   "silently dropping this SKB\n");
 			dev_kfree_skb_any(skb);
-			return 0;
+			return NETDEV_TX_OK;
 		}
 	}
 
@@ -9372,7 +9530,8 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	tx_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
 	tx_bd->general_data = (UNICAST_ADDRESS <<
 			       ETH_TX_BD_ETH_ADDR_TYPE_SHIFT);
-	tx_bd->general_data |= 1; /* header nbd */
+	/* header nbd */
+	tx_bd->general_data |= (1 << ETH_TX_BD_HDR_NBDS_SHIFT);
 
 	/* remember the first BD of the packet */
 	tx_buf->first_bd = fp->tx_bd_prod;
@@ -9451,7 +9610,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
 	tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
-	nbd = skb_shinfo(skb)->nr_frags + ((pbd == NULL)? 1 : 2);
+	nbd = skb_shinfo(skb)->nr_frags + ((pbd == NULL) ? 1 : 2);
 	tx_bd->nbd = cpu_to_le16(nbd);
 	tx_bd->nbytes = cpu_to_le16(skb_headlen(skb));
 
@@ -9721,9 +9880,9 @@ static int bnx2x_change_mac_addr(struct net_device *dev, void *p)
 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 	if (netif_running(dev)) {
 		if (CHIP_IS_E1(bp))
-			bnx2x_set_mac_addr_e1(bp);
+			bnx2x_set_mac_addr_e1(bp, 1);
 		else
-			bnx2x_set_mac_addr_e1h(bp);
+			bnx2x_set_mac_addr_e1h(bp, 1);
 	}
 
 	return 0;
@@ -9734,6 +9893,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	struct mii_ioctl_data *data = if_mii(ifr);
 	struct bnx2x *bp = netdev_priv(dev);
+	int port = BP_PORT(bp);
 	int err;
 
 	switch (cmd) {
@@ -9749,7 +9909,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 			return -EAGAIN;
 
 		mutex_lock(&bp->port.phy_mutex);
-		err = bnx2x_cl45_read(bp, BP_PORT(bp), 0, bp->port.phy_addr,
+		err = bnx2x_cl45_read(bp, port, 0, bp->port.phy_addr,
 				      DEFAULT_PHY_DEV_ADDR,
 				      (data->reg_num & 0x1f), &mii_regval);
 		data->val_out = mii_regval;
@@ -9765,7 +9925,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 			return -EAGAIN;
 
 		mutex_lock(&bp->port.phy_mutex);
-		err = bnx2x_cl45_write(bp, BP_PORT(bp), 0, bp->port.phy_addr,
+		err = bnx2x_cl45_write(bp, port, 0, bp->port.phy_addr,
 				       DEFAULT_PHY_DEV_ADDR,
 				       (data->reg_num & 0x1f), data->val_in);
 		mutex_unlock(&bp->port.phy_mutex);
@@ -10141,7 +10301,7 @@ static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	netif_device_detach(dev);
 
-	bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+	bnx2x_nic_unload(bp, UNLOAD_CLOSE);
 
 	bnx2x_set_power_state(bp, pci_choose_state(pdev, state));
 
@@ -10174,7 +10334,7 @@ static int bnx2x_resume(struct pci_dev *pdev)
 	bnx2x_set_power_state(bp, PCI_D0);
 	netif_device_attach(dev);
 
-	rc = bnx2x_nic_load(bp, LOAD_NORMAL);
+	rc = bnx2x_nic_load(bp, LOAD_OPEN);
 
 	rtnl_unlock();
 
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index 15c9a994672..a67b0c358ae 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -6,7 +6,7 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
- * The registers description starts with the regsister Access type followed
+ * The registers description starts with the register Access type followed
  * by size in bits. For example [RW 32]. The access types are:
  * R  - Read only
  * RC - Clear on read
@@ -49,7 +49,7 @@
 /* [RW 10] Write client 0: Assert pause threshold. */
 #define BRB1_REG_PAUSE_LOW_THRESHOLD_0				 0x60068
 #define BRB1_REG_PAUSE_LOW_THRESHOLD_1				 0x6006c
-/* [R 24] The number of full blocks occpied by port. */
+/* [R 24] The number of full blocks occupied by port. */
 #define BRB1_REG_PORT_NUM_OCC_BLOCKS_0				 0x60094
 /* [RW 1] Reset the design by software. */
 #define BRB1_REG_SOFT_RESET					 0x600dc
@@ -740,6 +740,7 @@
 #define HC_REG_ATTN_MSG1_ADDR_L 				 0x108020
 #define HC_REG_ATTN_NUM_P0					 0x108038
 #define HC_REG_ATTN_NUM_P1					 0x10803c
+#define HC_REG_COMMAND_REG					 0x108180
 #define HC_REG_CONFIG_0 					 0x108000
 #define HC_REG_CONFIG_1 					 0x108004
 #define HC_REG_FUNC_NUM_P0					 0x1080ac
@@ -1372,6 +1373,23 @@
    be asserted). */
 #define MISC_REG_DRIVER_CONTROL_16				 0xa5f0
 #define MISC_REG_DRIVER_CONTROL_16_SIZE 			 2
+/* [RW 32] The following driver registers(1...16) represent 16 drivers and
+   32 clients. Each client can be controlled by one driver only. One in each
+   bit represent that this driver control the appropriate client (Ex: bit 5
+   is set means this driver control client number 5). addr1 = set; addr0 =
+   clear; read from both addresses will give the same result = status. write
+   to address 1 will set a request to control all the clients that their
+   appropriate bit (in the write command) is set. if the client is free (the
+   appropriate bit in all the other drivers is clear) one will be written to
+   that driver register; if the client isn't free the bit will remain zero.
+   if the appropriate bit is set (the driver request to gain control on a
+   client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+   interrupt will be asserted). write to address 0 will set a request to
+   free all the clients that their appropriate bit (in the write command) is
+   set. if the appropriate bit is clear (the driver request to free a client
+   it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+   be asserted). */
+#define MISC_REG_DRIVER_CONTROL_7				 0xa3c8
 /* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0
    only. */
 #define MISC_REG_E1HMF_MODE					 0xa5f8
@@ -1394,13 +1412,13 @@
 #define MISC_REG_GPIO						 0xa490
 /* [R 28] this field hold the last information that caused reserved
    attention. bits [19:0] - address; [22:20] function; [23] reserved;
-   [27:24] the master thatcaused the attention - according to the following
+   [27:24] the master that caused the attention - according to the following
    encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
    dbu; 8 = dmae */
 #define MISC_REG_GRC_RSV_ATTN					 0xa3c0
 /* [R 28] this field hold the last information that caused timeout
    attention. bits [19:0] - address; [22:20] function; [23] reserved;
-   [27:24] the master thatcaused the attention - according to the following
+   [27:24] the master that caused the attention - according to the following
    encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
    dbu; 8 = dmae */
 #define MISC_REG_GRC_TIMEOUT_ATTN				 0xa3c4
@@ -1677,6 +1695,7 @@
 /* [RW 8] init credit counter for port0 in LLH */
 #define NIG_REG_LLH0_XCM_INIT_CREDIT				 0x10554
 #define NIG_REG_LLH0_XCM_MASK					 0x10130
+#define NIG_REG_LLH1_BRB1_DRV_MASK				 0x10248
 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
 #define NIG_REG_LLH1_BRB1_NOT_MCP				 0x102dc
 /* [RW 2] Determine the classification participants. 0: no classification.1:
@@ -1727,6 +1746,9 @@
 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
    for port0 */
 #define NIG_REG_STAT0_BRB_DISCARD				 0x105f0
+/* [R 32] Rx statistics : In user packets truncated due to BRB backpressure
+   for port0 */
+#define NIG_REG_STAT0_BRB_TRUNCATE				 0x105f8
 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
    between 1024 and 1522 bytes for port0 */
 #define NIG_REG_STAT0_EGRESS_MAC_PKT0				 0x10750
@@ -2298,7 +2320,7 @@
 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
    -128k */
 #define PXP2_REG_RQ_QM_P_SIZE					 0x120050
-/* [RW 1] 1' indicates that the RBC has finished configurating the PSWRQ */
+/* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
 #define PXP2_REG_RQ_RBC_DONE					 0x1201b0
 /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
    001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
@@ -2406,7 +2428,7 @@
 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
    buffer reaches this number has_payload will be asserted */
 #define PXP2_REG_WR_DMAE_MPS					 0x1205ec
-/* [RW 10] if Number of entries in dmae fifo will be higer than this
+/* [RW 10] if Number of entries in dmae fifo will be higher than this
    threshold then has_payload indication will be asserted; the default value
    should be equal to &gt;  write MBS size! */
 #define PXP2_REG_WR_DMAE_TH					 0x120368
@@ -2427,7 +2449,7 @@
 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
    buffer reaches this number has_payload will be asserted */
 #define PXP2_REG_WR_TSDM_MPS					 0x1205d4
-/* [RW 10] if Number of entries in usdmdp fifo will be higer than this
+/* [RW 10] if Number of entries in usdmdp fifo will be higher than this
    threshold then has_payload indication will be asserted; the default value
    should be equal to &gt;  write MBS size! */
 #define PXP2_REG_WR_USDMDP_TH					 0x120348
@@ -3294,12 +3316,12 @@
 #define XSEM_XSEM_INT_MASK_0_REG_ADDRESS_ERROR_SIZE		 0
 #define CFC_DEBUG1_REG_WRITE_AC 				 (0x1<<4)
 #define CFC_DEBUG1_REG_WRITE_AC_SIZE				 4
-/* [R 1] debug only: This bit indicates wheter indicates that external
+/* [R 1] debug only: This bit indicates whether indicates that external
    buffer was wrapped (oldest data was thrown); Relevant only when
    ~dbg_registers_debug_target=2 (PCI) & ~dbg_registers_full_mode=1 (wrap); */
 #define DBG_REG_WRAP_ON_EXT_BUFFER				 0xc124
 #define DBG_REG_WRAP_ON_EXT_BUFFER_SIZE 			 1
-/* [R 1] debug only: This bit indicates wheter the internal buffer was
+/* [R 1] debug only: This bit indicates whether the internal buffer was
    wrapped (oldest data was thrown) Relevant only when
    ~dbg_registers_debug_target=0 (internal buffer) */
 #define DBG_REG_WRAP_ON_INT_BUFFER				 0xc128
@@ -4944,6 +4966,7 @@
 #define EMAC_RX_MODE_PROMISCUOUS				 (1L<<8)
 #define EMAC_RX_MTU_SIZE_JUMBO_ENA				 (1L<<31)
 #define EMAC_TX_MODE_EXT_PAUSE_EN				 (1L<<3)
+#define EMAC_TX_MODE_FLOW_EN					 (1L<<4)
 #define MISC_REGISTERS_GPIO_0					 0
 #define MISC_REGISTERS_GPIO_1					 1
 #define MISC_REGISTERS_GPIO_2					 2
@@ -4959,6 +4982,7 @@
 #define MISC_REGISTERS_GPIO_PORT_SHIFT				 4
 #define MISC_REGISTERS_GPIO_SET_POS				 8
 #define MISC_REGISTERS_RESET_REG_1_CLEAR			 0x588
+#define MISC_REGISTERS_RESET_REG_1_RST_NIG			 (0x1<<7)
 #define MISC_REGISTERS_RESET_REG_1_SET				 0x584
 #define MISC_REGISTERS_RESET_REG_2_CLEAR			 0x598
 #define MISC_REGISTERS_RESET_REG_2_RST_BMAC0			 (0x1<<0)
@@ -4993,7 +5017,9 @@
 #define HW_LOCK_MAX_RESOURCE_VALUE				 31
 #define HW_LOCK_RESOURCE_8072_MDIO				 0
 #define HW_LOCK_RESOURCE_GPIO					 1
+#define HW_LOCK_RESOURCE_PORT0_ATT_MASK 			 3
 #define HW_LOCK_RESOURCE_SPIO					 2
+#define HW_LOCK_RESOURCE_UNDI					 5
 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR		      (1<<18)
 #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT		      (1<<31)
 #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT		      (1<<9)
@@ -5144,59 +5170,73 @@
 #define GRCBASE_MISC_AEU	GRCBASE_MISC
 
 
-/*the offset of the configuration space in the pci core register*/
+/* offset of configuration space in the pci core register */
 #define PCICFG_OFFSET					0x2000
 #define PCICFG_VENDOR_ID_OFFSET 			0x00
 #define PCICFG_DEVICE_ID_OFFSET 			0x02
 #define PCICFG_COMMAND_OFFSET				0x04
+#define PCICFG_COMMAND_IO_SPACE 		(1<<0)
+#define PCICFG_COMMAND_MEM_SPACE		(1<<1)
+#define PCICFG_COMMAND_BUS_MASTER		(1<<2)
+#define PCICFG_COMMAND_SPECIAL_CYCLES		(1<<3)
+#define PCICFG_COMMAND_MWI_CYCLES		(1<<4)
+#define PCICFG_COMMAND_VGA_SNOOP		(1<<5)
+#define PCICFG_COMMAND_PERR_ENA 		(1<<6)
+#define PCICFG_COMMAND_STEPPING 		(1<<7)
+#define PCICFG_COMMAND_SERR_ENA 		(1<<8)
+#define PCICFG_COMMAND_FAST_B2B 		(1<<9)
+#define PCICFG_COMMAND_INT_DISABLE		(1<<10)
+#define PCICFG_COMMAND_RESERVED 		(0x1f<<11)
 #define PCICFG_STATUS_OFFSET				0x06
-#define PCICFG_REVESION_ID				    0x08
+#define PCICFG_REVESION_ID				0x08
 #define PCICFG_CACHE_LINE_SIZE				0x0c
 #define PCICFG_LATENCY_TIMER				0x0d
-#define PCICFG_BAR_1_LOW				    0x10
-#define PCICFG_BAR_1_HIGH				    0x14
-#define PCICFG_BAR_2_LOW				    0x18
-#define PCICFG_BAR_2_HIGH				    0x1c
-#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET	0x2c
+#define PCICFG_BAR_1_LOW				0x10
+#define PCICFG_BAR_1_HIGH				0x14
+#define PCICFG_BAR_2_LOW				0x18
+#define PCICFG_BAR_2_HIGH				0x1c
+#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET		0x2c
 #define PCICFG_SUBSYSTEM_ID_OFFSET			0x2e
-#define PCICFG_INT_LINE 				    0x3c
-#define PCICFG_INT_PIN					    0x3d
-#define PCICFG_PM_CSR_OFFSET			0x4c
-#define PCICFG_GRC_ADDRESS				    0x78
-#define PCICFG_GRC_DATA 				    0x80
+#define PCICFG_INT_LINE 				0x3c
+#define PCICFG_INT_PIN					0x3d
+#define PCICFG_PM_CAPABILITY				0x48
+#define PCICFG_PM_CAPABILITY_VERSION		(0x3<<16)
+#define PCICFG_PM_CAPABILITY_CLOCK		(1<<19)
+#define PCICFG_PM_CAPABILITY_RESERVED		(1<<20)
+#define PCICFG_PM_CAPABILITY_DSI		(1<<21)
+#define PCICFG_PM_CAPABILITY_AUX_CURRENT	(0x7<<22)
+#define PCICFG_PM_CAPABILITY_D1_SUPPORT 	(1<<25)
+#define PCICFG_PM_CAPABILITY_D2_SUPPORT 	(1<<26)
+#define PCICFG_PM_CAPABILITY_PME_IN_D0		(1<<27)
+#define PCICFG_PM_CAPABILITY_PME_IN_D1		(1<<28)
+#define PCICFG_PM_CAPABILITY_PME_IN_D2		(1<<29)
+#define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT	(1<<30)
+#define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD	(1<<31)
+#define PCICFG_PM_CSR_OFFSET				0x4c
+#define PCICFG_PM_CSR_STATE			(0x3<<0)
+#define PCICFG_PM_CSR_PME_ENABLE		(1<<8)
+#define PCICFG_PM_CSR_PME_STATUS		(1<<15)
+#define PCICFG_GRC_ADDRESS				0x78
+#define PCICFG_GRC_DATA 				0x80
 #define PCICFG_DEVICE_CONTROL				0xb4
 #define PCICFG_LINK_CONTROL				0xbc
 
-#define PCICFG_COMMAND_IO_SPACE 		    (1<<0)
-#define PCICFG_COMMAND_MEM_SPACE		    (1<<1)
-#define PCICFG_COMMAND_BUS_MASTER		    (1<<2)
-#define PCICFG_COMMAND_SPECIAL_CYCLES		    (1<<3)
-#define PCICFG_COMMAND_MWI_CYCLES		    (1<<4)
-#define PCICFG_COMMAND_VGA_SNOOP		    (1<<5)
-#define PCICFG_COMMAND_PERR_ENA 		    (1<<6)
-#define PCICFG_COMMAND_STEPPING 		    (1<<7)
-#define PCICFG_COMMAND_SERR_ENA 		    (1<<8)
-#define PCICFG_COMMAND_FAST_B2B 		    (1<<9)
-#define PCICFG_COMMAND_INT_DISABLE		    (1<<10)
-#define PCICFG_COMMAND_RESERVED 		    (0x1f<<11)
-
-#define PCICFG_PM_CSR_STATE			    (0x3<<0)
-#define PCICFG_PM_CSR_PME_STATUS		    (1<<15)
 
 #define BAR_USTRORM_INTMEM				0x400000
 #define BAR_CSTRORM_INTMEM				0x410000
 #define BAR_XSTRORM_INTMEM				0x420000
 #define BAR_TSTRORM_INTMEM				0x430000
 
+/* for accessing the IGU in case of status block ACK */
 #define BAR_IGU_INTMEM					0x440000
 
 #define BAR_DOORBELL_OFFSET				0x800000
 
 #define BAR_ME_REGISTER 				0x450000
 
-
-#define GRC_CONFIG_2_SIZE_REG		    0x408 /* config_2 offset */
-#define PCI_CONFIG_2_BAR1_SIZE			    (0xfL<<0)
+/* config_2 offset */
+#define GRC_CONFIG_2_SIZE_REG				0x408
+#define PCI_CONFIG_2_BAR1_SIZE			(0xfL<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_DISABLED 	(0L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_64K		(1L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_128K		(2L<<0)
@@ -5213,11 +5253,11 @@
 #define PCI_CONFIG_2_BAR1_SIZE_256M		(13L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_512M		(14L<<0)
 #define PCI_CONFIG_2_BAR1_SIZE_1G		(15L<<0)
-#define PCI_CONFIG_2_BAR1_64ENA 		    (1L<<4)
-#define PCI_CONFIG_2_EXP_ROM_RETRY		    (1L<<5)
-#define PCI_CONFIG_2_CFG_CYCLE_RETRY		    (1L<<6)
-#define PCI_CONFIG_2_FIRST_CFG_DONE		    (1L<<7)
-#define PCI_CONFIG_2_EXP_ROM_SIZE		    (0xffL<<8)
+#define PCI_CONFIG_2_BAR1_64ENA 		(1L<<4)
+#define PCI_CONFIG_2_EXP_ROM_RETRY		(1L<<5)
+#define PCI_CONFIG_2_CFG_CYCLE_RETRY		(1L<<6)
+#define PCI_CONFIG_2_FIRST_CFG_DONE		(1L<<7)
+#define PCI_CONFIG_2_EXP_ROM_SIZE		(0xffL<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED	(0L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_2K		(1L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_4K		(2L<<8)
@@ -5234,46 +5274,44 @@
 #define PCI_CONFIG_2_EXP_ROM_SIZE_8M		(13L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_16M		(14L<<8)
 #define PCI_CONFIG_2_EXP_ROM_SIZE_32M		(15L<<8)
-#define PCI_CONFIG_2_BAR_PREFETCH		    (1L<<16)
-#define PCI_CONFIG_2_RESERVED0			    (0x7fffL<<17)
+#define PCI_CONFIG_2_BAR_PREFETCH		(1L<<16)
+#define PCI_CONFIG_2_RESERVED0			(0x7fffL<<17)
 
 /* config_3 offset */
-#define GRC_CONFIG_3_SIZE_REG				(0x40c)
-#define PCI_CONFIG_3_STICKY_BYTE		    (0xffL<<0)
-#define PCI_CONFIG_3_FORCE_PME			    (1L<<24)
-#define PCI_CONFIG_3_PME_STATUS 		    (1L<<25)
-#define PCI_CONFIG_3_PME_ENABLE 		    (1L<<26)
-#define PCI_CONFIG_3_PM_STATE			    (0x3L<<27)
-#define PCI_CONFIG_3_VAUX_PRESET		    (1L<<30)
-#define PCI_CONFIG_3_PCI_POWER			    (1L<<31)
-
-/* config_2 offset */
-#define GRC_CONFIG_2_SIZE_REG		    0x408
+#define GRC_CONFIG_3_SIZE_REG				0x40c
+#define PCI_CONFIG_3_STICKY_BYTE		(0xffL<<0)
+#define PCI_CONFIG_3_FORCE_PME			(1L<<24)
+#define PCI_CONFIG_3_PME_STATUS 		(1L<<25)
+#define PCI_CONFIG_3_PME_ENABLE 		(1L<<26)
+#define PCI_CONFIG_3_PM_STATE			(0x3L<<27)
+#define PCI_CONFIG_3_VAUX_PRESET		(1L<<30)
+#define PCI_CONFIG_3_PCI_POWER			(1L<<31)
 
 #define GRC_BAR2_CONFIG 				0x4e0
-#define PCI_CONFIG_2_BAR2_SIZE			    (0xfL<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_DISABLED 	    (0L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_64K		    (1L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_128K		    (2L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_256K		    (3L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_512K		    (4L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_1M		    (5L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_2M		    (6L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_4M		    (7L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_8M		    (8L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_16M		    (9L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_32M		    (10L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_64M		    (11L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_128M		    (12L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_256M		    (13L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_512M		    (14L<<0)
-#define PCI_CONFIG_2_BAR2_SIZE_1G		    (15L<<0)
-#define PCI_CONFIG_2_BAR2_64ENA 		    (1L<<4)
+#define PCI_CONFIG_2_BAR2_SIZE			(0xfL<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_DISABLED 	(0L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_64K		(1L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_128K		(2L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_256K		(3L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_512K		(4L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_1M		(5L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_2M		(6L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_4M		(7L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_8M		(8L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_16M		(9L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_32M		(10L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_64M		(11L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_128M		(12L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_256M		(13L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_512M		(14L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_1G		(15L<<0)
+#define PCI_CONFIG_2_BAR2_64ENA 		(1L<<4)
+
+#define PCI_PM_DATA_A					0x410
+#define PCI_PM_DATA_B					0x414
+#define PCI_ID_VAL1					0x434
+#define PCI_ID_VAL2					0x438
 
-#define PCI_PM_DATA_A					(0x410)
-#define PCI_PM_DATA_B					(0x414)
-#define PCI_ID_VAL1					(0x434)
-#define PCI_ID_VAL2					(0x438)
 
 #define MDIO_REG_BANK_CL73_IEEEB0			0x0
 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL		0x0
@@ -5522,6 +5560,8 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_PMA_REG_GEN_CTRL		0xca10
 #define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP	0x0188
 #define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET		0x018a
+#define MDIO_PMA_REG_M8051_MSGIN_REG	0xca12
+#define MDIO_PMA_REG_M8051_MSGOUT_REG	0xca13
 #define MDIO_PMA_REG_ROM_VER1		0xca19
 #define MDIO_PMA_REG_ROM_VER2		0xca1a
 #define MDIO_PMA_REG_EDC_FFE_MAIN	0xca1b
@@ -5576,7 +5616,8 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_AN_REG_LINK_STATUS 	0x8304
 #define MDIO_AN_REG_CL37_CL73		0x8370
 #define MDIO_AN_REG_CL37_AN		0xffe0
-#define MDIO_AN_REG_CL37_FD		0xffe4
+#define MDIO_AN_REG_CL37_FC_LD		0xffe4
+#define MDIO_AN_REG_CL37_FC_LP		0xffe5
 
 
 #define IGU_FUNC_BASE			0x0400
@@ -5600,4 +5641,13 @@ Theotherbitsarereservedandshouldbezero*/
 #define IGU_INT_NOP				2
 #define IGU_INT_NOP2			3
 
+#define COMMAND_REG_INT_ACK	    0x0
+#define COMMAND_REG_PROD_UPD	    0x4
+#define COMMAND_REG_ATTN_BITS_UPD   0x8
+#define COMMAND_REG_ATTN_BITS_SET   0xc
+#define COMMAND_REG_ATTN_BITS_CLR   0x10
+#define COMMAND_REG_COALESCE_NOW    0x14
+#define COMMAND_REG_SIMD_MASK	    0x18
+#define COMMAND_REG_SIMD_NOMASK     0x1c
+
 
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 18354817173..4a10b5624f7 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -308,9 +308,8 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
 				  entry->msi_attrib.masked);
 
 	pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
-	control &= ~(PCI_MSI_FLAGS_QSIZE | PCI_MSI_FLAGS_ENABLE);
-	if (entry->msi_attrib.maskbit || !entry->msi_attrib.masked)
-		control |= PCI_MSI_FLAGS_ENABLE;
+	control &= ~PCI_MSI_FLAGS_QSIZE;
+	control |= PCI_MSI_FLAGS_ENABLE;
 	pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
 }
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 0a3d856833f..c9884bba22d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1060,7 +1060,7 @@ bool pci_pme_capable(struct pci_dev *dev, pci_power_t state)
  * The caller must verify that the device is capable of generating PME# before
  * calling this function with @enable equal to 'true'.
  */
-static void pci_pme_active(struct pci_dev *dev, bool enable)
+void pci_pme_active(struct pci_dev *dev, bool enable)
 {
 	u16 pmcsr;
 
@@ -1941,6 +1941,7 @@ EXPORT_SYMBOL(pci_set_power_state);
 EXPORT_SYMBOL(pci_save_state);
 EXPORT_SYMBOL(pci_restore_state);
 EXPORT_SYMBOL(pci_pme_capable);
+EXPORT_SYMBOL(pci_pme_active);
 EXPORT_SYMBOL(pci_enable_wake);
 EXPORT_SYMBOL(pci_target_state);
 EXPORT_SYMBOL(pci_prepare_to_sleep);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 7098dfb0744..a04498d390c 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -52,27 +52,49 @@ EXPORT_SYMBOL(no_pci_devices);
  * Some platforms allow access to legacy I/O port and ISA memory space on
  * a per-bus basis.  This routine creates the files and ties them into
  * their associated read, write and mmap files from pci-sysfs.c
+ *
+ * On error unwind, but don't propogate the error to the caller
+ * as it is ok to set up the PCI bus without these files.
  */
 static void pci_create_legacy_files(struct pci_bus *b)
 {
+	int error;
+
 	b->legacy_io = kzalloc(sizeof(struct bin_attribute) * 2,
 			       GFP_ATOMIC);
-	if (b->legacy_io) {
-		b->legacy_io->attr.name = "legacy_io";
-		b->legacy_io->size = 0xffff;
-		b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
-		b->legacy_io->read = pci_read_legacy_io;
-		b->legacy_io->write = pci_write_legacy_io;
-		device_create_bin_file(&b->dev, b->legacy_io);
-
-		/* Allocated above after the legacy_io struct */
-		b->legacy_mem = b->legacy_io + 1;
-		b->legacy_mem->attr.name = "legacy_mem";
-		b->legacy_mem->size = 1024*1024;
-		b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
-		b->legacy_mem->mmap = pci_mmap_legacy_mem;
-		device_create_bin_file(&b->dev, b->legacy_mem);
-	}
+	if (!b->legacy_io)
+		goto kzalloc_err;
+
+	b->legacy_io->attr.name = "legacy_io";
+	b->legacy_io->size = 0xffff;
+	b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
+	b->legacy_io->read = pci_read_legacy_io;
+	b->legacy_io->write = pci_write_legacy_io;
+	error = device_create_bin_file(&b->dev, b->legacy_io);
+	if (error)
+		goto legacy_io_err;
+
+	/* Allocated above after the legacy_io struct */
+	b->legacy_mem = b->legacy_io + 1;
+	b->legacy_mem->attr.name = "legacy_mem";
+	b->legacy_mem->size = 1024*1024;
+	b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
+	b->legacy_mem->mmap = pci_mmap_legacy_mem;
+	error = device_create_bin_file(&b->dev, b->legacy_mem);
+	if (error)
+		goto legacy_mem_err;
+
+	return;
+
+legacy_mem_err:
+	device_remove_bin_file(&b->dev, b->legacy_io);
+legacy_io_err:
+	kfree(b->legacy_io);
+	b->legacy_io = NULL;
+kzalloc_err:
+	printk(KERN_WARNING "pci: warning: could not create legacy I/O port "
+	       "and ISA memory resources to sysfs\n");
+	return;
 }
 
 void pci_remove_legacy_files(struct pci_bus *b)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 0fb36507428..9236e7f869c 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1756,9 +1756,14 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_c
  */
 static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
 {
-	/*  Only disable the VPD capability for 5706, 5708, and 5709 rev. A */
+	/*
+	 * Only disable the VPD capability for 5706, 5706S, 5708,
+	 * 5708S and 5709 rev. A
+	 */
 	if ((dev->device == PCI_DEVICE_ID_NX2_5706) ||
+	    (dev->device == PCI_DEVICE_ID_NX2_5706S) ||
 	    (dev->device == PCI_DEVICE_ID_NX2_5708) ||
+	    (dev->device == PCI_DEVICE_ID_NX2_5708S) ||
 	    ((dev->device == PCI_DEVICE_ID_NX2_5709) &&
 	     (dev->revision & 0xf0) == 0x0)) {
 		if (dev->vpd)
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index a8771ffc61e..e07b5c51ec5 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -23,12 +23,57 @@
 
 static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
-	skt->irq = IRQ_GPIO(GPIO_NR_PALMTX_PCMCIA_READY);
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
+	if (ret)
+		goto err3;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
+	if (ret)
+		goto err3;
+	ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
+	if (ret)
+		goto err4;
+
+	ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
+	if (ret)
+		goto err4;
+	ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
+	if (ret)
+		goto err5;
+
+	skt->irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
 	return 0;
+
+err5:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+err4:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+err3:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+err2:
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
+err1:
+	return ret;
 }
 
 static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+	gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
 }
 
 static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
@@ -109,7 +154,7 @@ static void __exit palmtx_pcmcia_exit(void)
 	platform_device_unregister(palmtx_pcmcia_device);
 }
 
-fs_initcall(palmtx_pcmcia_init);
+module_init(palmtx_pcmcia_init);
 module_exit(palmtx_pcmcia_exit);
 
 MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 856cc1af40d..35dcc06eb3e 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -13,7 +13,6 @@
 
 #include <linux/module.h>
 #include <linux/rtc.h>
-#include <linux/smp_lock.h>
 #include "rtc-core.h"
 
 static dev_t rtc_devt;
@@ -27,11 +26,8 @@ static int rtc_dev_open(struct inode *inode, struct file *file)
 					struct rtc_device, char_dev);
 	const struct rtc_class_ops *ops = rtc->ops;
 
-	lock_kernel();
-	if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags)) {
-		err = -EBUSY;
-		goto out;
-	}
+	if (test_and_set_bit_lock(RTC_DEV_BUSY, &rtc->flags))
+		return -EBUSY;
 
 	file->private_data = rtc;
 
@@ -41,13 +37,11 @@ static int rtc_dev_open(struct inode *inode, struct file *file)
 		rtc->irq_data = 0;
 		spin_unlock_irq(&rtc->irq_lock);
 
-		goto out;
+		return 0;
 	}
 
 	/* something has gone wrong */
 	clear_bit_unlock(RTC_DEV_BUSY, &rtc->flags);
-out:
-	unlock_kernel();
 	return err;
 }
 
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index fbb90b1e409..a81adab6e51 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -482,7 +482,7 @@ isl1208_sysfs_register(struct device *dev)
 static int
 isl1208_sysfs_unregister(struct device *dev)
 {
-	device_remove_file(dev, &dev_attr_atrim);
+	device_remove_file(dev, &dev_attr_dtrim);
 	device_remove_file(dev, &dev_attr_atrim);
 	device_remove_file(dev, &dev_attr_usr);
 
diff --git a/drivers/sbus/sbus.c b/drivers/sbus/sbus.c
index 73a86d09bba..9c129248466 100644
--- a/drivers/sbus/sbus.c
+++ b/drivers/sbus/sbus.c
@@ -7,13 +7,13 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/of_device.h>
 
 #include <asm/system.h>
 #include <asm/sbus.h>
 #include <asm/dma.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/bpp.h>
 #include <asm/irq.h>
 
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index fcdd73f2562..994da56fffe 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -680,7 +680,7 @@ static int alua_prep_fn(struct scsi_device *sdev, struct request *req)
 
 }
 
-const struct scsi_dh_devlist alua_dev_list[] = {
+static const struct scsi_dh_devlist alua_dev_list[] = {
 	{"HP", "MSA VOLUME" },
 	{"HP", "HSV101" },
 	{"HP", "HSV111" },
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index aa46b131b20..b9d23e9e9a4 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -562,7 +562,7 @@ done:
 	return result;
 }
 
-const struct scsi_dh_devlist clariion_dev_list[] = {
+static const struct scsi_dh_devlist clariion_dev_list[] = {
 	{"DGC", "RAID"},
 	{"DGC", "DISK"},
 	{"DGC", "VRAID"},
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index 9c7a1f8ebb7..a6a4ef3ad51 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -282,7 +282,7 @@ static int hp_sw_activate(struct scsi_device *sdev)
 	return ret;
 }
 
-const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
+static const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
 	{"COMPAQ", "MSA1000 VOLUME"},
 	{"COMPAQ", "HSV110"},
 	{"HP", "HSV100"},
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index b093a501f8a..e7c7b4ebc1f 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -574,7 +574,7 @@ static int rdac_check_sense(struct scsi_device *sdev,
 	return SCSI_RETURN_NOT_HANDLED;
 }
 
-const struct scsi_dh_devlist rdac_dev_list[] = {
+static const struct scsi_dh_devlist rdac_dev_list[] = {
 	{"IBM", "1722"},
 	{"IBM", "1724"},
 	{"IBM", "1726"},
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3b4a14e355c..77cb34270fc 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -449,6 +449,7 @@ config SERIAL_CLPS711X_CONSOLE
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
 	depends on ARM && PLAT_S3C24XX
+	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
 	  providing /dev/ttySAC0, 1 and 2 (note, some machines may not
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index aeeec5588af..e41766d0803 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -17,11 +17,11 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/of_device.h>
 
 #include <asm/hypervisor.h>
 #include <asm/spitfire.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 #include <asm/irq.h>
 
 #if defined(CONFIG_MAGIC_SYSRQ)
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 15ee497e1c7..29b4458abf7 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -32,11 +32,11 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index e24e6823508..a378464f929 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -35,11 +35,11 @@
 #include <linux/serial_reg.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 0f3d69b86d6..3cb4c8aee13 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -32,11 +32,11 @@
 #include <linux/serio.h>
 #endif
 #include <linux/init.h>
+#include <linux/of_device.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/of_device.h>
 
 #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 964124b60db..75e86865234 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -226,10 +226,11 @@ EXPORT_SYMBOL_GPL(spi_alloc_device);
  * Companion function to spi_alloc_device.  Devices allocated with
  * spi_alloc_device can be added onto the spi bus with this function.
  *
- * Returns 0 on success; non-zero on failure
+ * Returns 0 on success; negative errno on failure
  */
 int spi_add_device(struct spi_device *spi)
 {
+	static DEFINE_MUTEX(spi_add_lock);
 	struct device *dev = spi->master->dev.parent;
 	int status;
 
@@ -246,26 +247,43 @@ int spi_add_device(struct spi_device *spi)
 			"%s.%u", spi->master->dev.bus_id,
 			spi->chip_select);
 
-	/* drivers may modify this initial i/o setup */
+
+	/* We need to make sure there's no other device with this
+	 * chipselect **BEFORE** we call setup(), else we'll trash
+	 * its configuration.  Lock against concurrent add() calls.
+	 */
+	mutex_lock(&spi_add_lock);
+
+	if (bus_find_device_by_name(&spi_bus_type, NULL, spi->dev.bus_id)
+			!= NULL) {
+		dev_err(dev, "chipselect %d already in use\n",
+				spi->chip_select);
+		status = -EBUSY;
+		goto done;
+	}
+
+	/* Drivers may modify this initial i/o setup, but will
+	 * normally rely on the device being setup.  Devices
+	 * using SPI_CS_HIGH can't coexist well otherwise...
+	 */
 	status = spi->master->setup(spi);
 	if (status < 0) {
 		dev_err(dev, "can't %s %s, status %d\n",
 				"setup", spi->dev.bus_id, status);
-		return status;
+		goto done;
 	}
 
-	/* driver core catches callers that misbehave by defining
-	 * devices that already exist.
-	 */
+	/* Device may be bound to an active driver when this returns */
 	status = device_add(&spi->dev);
-	if (status < 0) {
+	if (status < 0)
 		dev_err(dev, "can't %s %s, status %d\n",
 				"add", spi->dev.bus_id, status);
-		return status;
-	}
+	else
+		dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
 
-	dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
-	return 0;
+done:
+	mutex_unlock(&spi_add_lock);
+	return status;
 }
 EXPORT_SYMBOL_GPL(spi_add_device);
 
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 755823cdf62..bcefbddeba5 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -95,16 +95,18 @@ config USB
 
 source "drivers/usb/core/Kconfig"
 
+source "drivers/usb/mon/Kconfig"
+
 source "drivers/usb/host/Kconfig"
 
+source "drivers/usb/musb/Kconfig"
+
 source "drivers/usb/class/Kconfig"
 
 source "drivers/usb/storage/Kconfig"
 
 source "drivers/usb/image/Kconfig"
 
-source "drivers/usb/mon/Kconfig"
-
 comment "USB port drivers"
 	depends on USB
 
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 507a9bd0d77..9aea43a8c4a 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -602,7 +602,7 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ
 			offd = le32_to_cpu(buf[offb++]);
 			if (offd >= size) {
 				if (printk_ratelimit())
-					usb_err(instance->usbatm, "wrong index #%x in response to cm #%x\n",
+					usb_err(instance->usbatm, "wrong index %#x in response to cm %#x\n",
 						offd, cm);
 				ret = -EIO;
 				goto cleanup;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 0725b1871f2..efc4373eded 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -51,6 +51,7 @@
  */
 
 #undef DEBUG
+#undef VERBOSE_DEBUG
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -70,6 +71,9 @@
 
 #include "cdc-acm.h"
 
+
+#define ACM_CLOSE_TIMEOUT	15	/* seconds to let writes drain */
+
 /*
  * Version Information
  */
@@ -85,6 +89,12 @@ static DEFINE_MUTEX(open_mutex);
 
 #define ACM_READY(acm)	(acm && acm->dev && acm->used)
 
+#ifdef VERBOSE_DEBUG
+#define verbose	1
+#else
+#define verbose	0
+#endif
+
 /*
  * Functions for ACM control messages.
  */
@@ -136,19 +146,17 @@ static int acm_wb_alloc(struct acm *acm)
 static int acm_wb_is_avail(struct acm *acm)
 {
 	int i, n;
+	unsigned long flags;
 
 	n = ACM_NW;
+	spin_lock_irqsave(&acm->write_lock, flags);
 	for (i = 0; i < ACM_NW; i++) {
 		n -= acm->wb[i].use;
 	}
+	spin_unlock_irqrestore(&acm->write_lock, flags);
 	return n;
 }
 
-static inline int acm_wb_is_used(struct acm *acm, int wbn)
-{
-	return acm->wb[wbn].use;
-}
-
 /*
  * Finish write.
  */
@@ -157,7 +165,6 @@ static void acm_write_done(struct acm *acm, struct acm_wb *wb)
 	unsigned long flags;
 
 	spin_lock_irqsave(&acm->write_lock, flags);
-	acm->write_ready = 1;
 	wb->use = 0;
 	acm->transmitting--;
 	spin_unlock_irqrestore(&acm->write_lock, flags);
@@ -190,40 +197,25 @@ static int acm_start_wb(struct acm *acm, struct acm_wb *wb)
 static int acm_write_start(struct acm *acm, int wbn)
 {
 	unsigned long flags;
-	struct acm_wb *wb;
+	struct acm_wb *wb = &acm->wb[wbn];
 	int rc;
 
 	spin_lock_irqsave(&acm->write_lock, flags);
 	if (!acm->dev) {
+		wb->use = 0;
 		spin_unlock_irqrestore(&acm->write_lock, flags);
 		return -ENODEV;
 	}
 
-	if (!acm->write_ready) {
-		spin_unlock_irqrestore(&acm->write_lock, flags);
-		return 0;	/* A white lie */
-	}
-
-	wb = &acm->wb[wbn];
-	if(acm_wb_is_avail(acm) <= 1)
-		acm->write_ready = 0;
-
 	dbg("%s susp_count: %d", __func__, acm->susp_count);
 	if (acm->susp_count) {
-		acm->old_ready = acm->write_ready;
 		acm->delayed_wb = wb;
-		acm->write_ready = 0;
 		schedule_work(&acm->waker);
 		spin_unlock_irqrestore(&acm->write_lock, flags);
 		return 0;	/* A white lie */
 	}
 	usb_mark_last_busy(acm->dev);
 
-	if (!acm_wb_is_used(acm, wbn)) {
-		spin_unlock_irqrestore(&acm->write_lock, flags);
-		return 0;
-	}
-
 	rc = acm_start_wb(acm, wb);
 	spin_unlock_irqrestore(&acm->write_lock, flags);
 
@@ -488,22 +480,28 @@ urbs:
 /* data interface wrote those outgoing bytes */
 static void acm_write_bulk(struct urb *urb)
 {
-	struct acm *acm;
 	struct acm_wb *wb = urb->context;
+	struct acm *acm = wb->instance;
 
-	dbg("Entering acm_write_bulk with status %d", urb->status);
+	if (verbose || urb->status
+			|| (urb->actual_length != urb->transfer_buffer_length))
+		dev_dbg(&acm->data->dev, "tx %d/%d bytes -- > %d\n",
+			urb->actual_length,
+			urb->transfer_buffer_length,
+			urb->status);
 
-	acm = wb->instance;
 	acm_write_done(acm, wb);
 	if (ACM_READY(acm))
 		schedule_work(&acm->work);
+	else
+		wake_up_interruptible(&acm->drain_wait);
 }
 
 static void acm_softint(struct work_struct *work)
 {
 	struct acm *acm = container_of(work, struct acm, work);
-	dbg("Entering acm_softint.");
-	
+
+	dev_vdbg(&acm->data->dev, "tx work\n");
 	if (!ACM_READY(acm))
 		return;
 	tty_wakeup(acm->tty);
@@ -512,7 +510,6 @@ static void acm_softint(struct work_struct *work)
 static void acm_waker(struct work_struct *waker)
 {
 	struct acm *acm = container_of(waker, struct acm, waker);
-	long flags;
 	int rv;
 
 	rv = usb_autopm_get_interface(acm->control);
@@ -524,9 +521,6 @@ static void acm_waker(struct work_struct *waker)
 		acm_start_wb(acm, acm->delayed_wb);
 		acm->delayed_wb = NULL;
 	}
-	spin_lock_irqsave(&acm->write_lock, flags);
-	acm->write_ready = acm->old_ready;
-	spin_unlock_irqrestore(&acm->write_lock, flags);
 	usb_autopm_put_interface(acm->control);
 }
 
@@ -628,6 +622,8 @@ static void acm_tty_unregister(struct acm *acm)
 	kfree(acm);
 }
 
+static int acm_tty_chars_in_buffer(struct tty_struct *tty);
+
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 {
 	struct acm *acm = tty->driver_data;
@@ -642,6 +638,13 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 		if (acm->dev) {
 			usb_autopm_get_interface(acm->control);
 			acm_set_control(acm, acm->ctrlout = 0);
+
+			/* try letting the last writes drain naturally */
+			wait_event_interruptible_timeout(acm->drain_wait,
+					(ACM_NW == acm_wb_is_avail(acm))
+						|| !acm->dev,
+					ACM_CLOSE_TIMEOUT * HZ);
+
 			usb_kill_urb(acm->ctrlurb);
 			for (i = 0; i < ACM_NW; i++)
 				usb_kill_urb(acm->wb[i].urb);
@@ -697,7 +700,7 @@ static int acm_tty_write_room(struct tty_struct *tty)
 	 * Do not let the line discipline to know that we have a reserve,
 	 * or it might get too enthusiastic.
 	 */
-	return (acm->write_ready && acm_wb_is_avail(acm)) ? acm->writesize : 0;
+	return acm_wb_is_avail(acm) ? acm->writesize : 0;
 }
 
 static int acm_tty_chars_in_buffer(struct tty_struct *tty)
@@ -1072,11 +1075,11 @@ skip_normal_probe:
 	acm->urb_task.data = (unsigned long) acm;
 	INIT_WORK(&acm->work, acm_softint);
 	INIT_WORK(&acm->waker, acm_waker);
+	init_waitqueue_head(&acm->drain_wait);
 	spin_lock_init(&acm->throttle_lock);
 	spin_lock_init(&acm->write_lock);
 	spin_lock_init(&acm->read_lock);
 	mutex_init(&acm->mutex);
-	acm->write_ready = 1;
 	acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress);
 
 	buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
@@ -1108,9 +1111,11 @@ skip_normal_probe:
 		rcv->instance = acm;
 	}
 	for (i = 0; i < num_rx_buf; i++) {
-		struct acm_rb *buf = &(acm->rb[i]);
+		struct acm_rb *rb = &(acm->rb[i]);
 
-		if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) {
+		rb->base = usb_buffer_alloc(acm->dev, readsize,
+				GFP_KERNEL, &rb->dma);
+		if (!rb->base) {
 			dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
 			goto alloc_fail7;
 		}
@@ -1172,6 +1177,7 @@ skip_countries:
 	acm_set_line(acm, &acm->line);
 
 	usb_driver_claim_interface(&acm_driver, data_interface, acm);
+	usb_set_intfdata(data_interface, acm);
 
 	usb_get_intf(control_interface);
 	tty_register_device(acm_tty_driver, minor, &control_interface->dev);
@@ -1221,11 +1227,11 @@ static void acm_disconnect(struct usb_interface *intf)
 	struct acm *acm = usb_get_intfdata(intf);
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 
-	mutex_lock(&open_mutex);
-	if (!acm || !acm->dev) {
-		mutex_unlock(&open_mutex);
+	/* sibling interface is already cleaning up */
+	if (!acm)
 		return;
-	}
+
+	mutex_lock(&open_mutex);
 	if (acm->country_codes){
 		device_remove_file(&acm->control->dev,
 				&dev_attr_wCountryCodes);
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 85c3aaaab7c..1f95e7aa1b6 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -106,8 +106,6 @@ struct acm {
 	struct list_head spare_read_bufs;
 	struct list_head filled_read_bufs;
 	int write_used;					/* number of non-empty write buffers */
-	int write_ready;				/* write urb is not running */
-	int old_ready;
 	int processing;
 	int transmitting;
 	spinlock_t write_lock;
@@ -115,6 +113,7 @@ struct acm {
 	struct usb_cdc_line_coding line;		/* bits, stop, parity */
 	struct work_struct work;			/* work queue entry for line discipline waking up */
 	struct work_struct waker;
+	wait_queue_head_t drain_wait;			/* close processing */
 	struct tasklet_struct urb_task;                 /* rx processing */
 	spinlock_t throttle_lock;			/* synchronize throtteling and read callback */
 	unsigned int ctrlin;				/* input control lines (DCD, DSR, RI, break, overruns) */
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index ddb54e14a5c..2be37fe466f 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -774,7 +774,6 @@ void usb_deregister(struct usb_driver *driver)
 }
 EXPORT_SYMBOL_GPL(usb_deregister);
 
-
 /* Forced unbinding of a USB interface driver, either because
  * it doesn't support pre_reset/post_reset/reset_resume or
  * because it doesn't support suspend/resume.
@@ -821,6 +820,8 @@ void usb_rebind_intf(struct usb_interface *intf)
 		dev_warn(&intf->dev, "rebind failed: %d\n", rc);
 }
 
+#ifdef CONFIG_PM
+
 #define DO_UNBIND	0
 #define DO_REBIND	1
 
@@ -872,8 +873,6 @@ static void do_unbind_rebind(struct usb_device *udev, int action)
 	}
 }
 
-#ifdef CONFIG_PM
-
 /* Caller has locked udev's pm_mutex */
 static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
 {
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 586d6f1376c..286b4431a09 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1091,8 +1091,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 				continue;
 			dev_dbg(&dev->dev, "unregistering interface %s\n",
 				dev_name(&interface->dev));
-			device_del(&interface->dev);
 			usb_remove_sysfs_intf_files(interface);
+			device_del(&interface->dev);
 		}
 
 		/* Now that the interfaces are unbound, nobody should
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index c6a8c6b1116..acc95b2ac6f 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -284,6 +284,16 @@ config USB_LH7A40X
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+# built in ../musb along with host support
+config USB_GADGET_MUSB_HDRC
+	boolean "Inventra HDRC USB Peripheral (TI, ...)"
+	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
+	select USB_GADGET_DUALSPEED
+	select USB_GADGET_SELECTED
+	help
+	  This OTG-capable silicon IP is used in dual designs including
+	  the TI DaVinci, OMAP 243x, OMAP 343x, and TUSB 6010.
+
 config USB_GADGET_OMAP
 	boolean "OMAP USB Device Controller"
 	depends on ARCH_OMAP
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 21d1406af9e..7600a0c7875 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -542,13 +542,14 @@ dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
 		req->req.context = dum;
 		req->req.complete = fifo_complete;
 
+		list_add_tail(&req->queue, &ep->queue);
 		spin_unlock (&dum->lock);
 		_req->actual = _req->length;
 		_req->status = 0;
 		_req->complete (_ep, _req);
 		spin_lock (&dum->lock);
-	}
-	list_add_tail (&req->queue, &ep->queue);
+	}  else
+		list_add_tail(&req->queue, &ep->queue);
 	spin_unlock_irqrestore (&dum->lock, flags);
 
 	/* real hardware would likely enable transfers here, in case
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index d8faccf2789..5ee1590b8e9 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -47,18 +47,37 @@ struct f_acm {
 	u8				ctrl_id, data_id;
 	u8				port_num;
 
-	struct usb_descriptor_header	**fs_function;
+	u8				pending;
+
+	/* lock is mostly for pending and notify_req ... they get accessed
+	 * by callbacks both from tty (open/close/break) under its spinlock,
+	 * and notify_req.complete() which can't use that lock.
+	 */
+	spinlock_t			lock;
+
 	struct acm_ep_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct acm_ep_descs		hs;
 
 	struct usb_ep			*notify;
 	struct usb_endpoint_descriptor	*notify_desc;
+	struct usb_request		*notify_req;
 
 	struct usb_cdc_line_coding	port_line_coding;	/* 8-N-1 etc */
+
+	/* SetControlLineState request -- CDC 1.1 section 6.2.14 (INPUT) */
 	u16				port_handshake_bits;
-#define RS232_RTS	(1 << 1)	/* unused with full duplex */
-#define RS232_DTR	(1 << 0)	/* host is ready for data r/w */
+#define ACM_CTRL_RTS	(1 << 1)	/* unused with full duplex */
+#define ACM_CTRL_DTR	(1 << 0)	/* host is ready for data r/w */
+
+	/* SerialState notification -- CDC 1.1 section 6.3.5 (OUTPUT) */
+	u16				serial_state;
+#define ACM_CTRL_OVERRUN	(1 << 6)
+#define ACM_CTRL_PARITY		(1 << 5)
+#define ACM_CTRL_FRAMING	(1 << 4)
+#define ACM_CTRL_RI		(1 << 3)
+#define ACM_CTRL_BRK		(1 << 2)
+#define ACM_CTRL_DSR		(1 << 1)
+#define ACM_CTRL_DCD		(1 << 0)
 };
 
 static inline struct f_acm *func_to_acm(struct usb_function *f)
@@ -66,12 +85,17 @@ static inline struct f_acm *func_to_acm(struct usb_function *f)
 	return container_of(f, struct f_acm, port.func);
 }
 
+static inline struct f_acm *port_to_acm(struct gserial *p)
+{
+	return container_of(p, struct f_acm, port);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* notification endpoint uses smallish and infrequent fixed-size messages */
 
 #define GS_LOG2_NOTIFY_INTERVAL		5	/* 1 << 5 == 32 msec */
-#define GS_NOTIFY_MAXPACKET		8
+#define GS_NOTIFY_MAXPACKET		10	/* notification + 2 bytes */
 
 /* interface and class descriptors: */
 
@@ -117,7 +141,7 @@ static struct usb_cdc_acm_descriptor acm_descriptor __initdata = {
 	.bLength =		sizeof(acm_descriptor),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_ACM_TYPE,
-	.bmCapabilities =	(1 << 1),
+	.bmCapabilities =	USB_CDC_CAP_LINE,
 };
 
 static struct usb_cdc_union_desc acm_union_desc __initdata = {
@@ -277,6 +301,11 @@ static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 
 	/* composite driver infrastructure handles everything except
 	 * CDC class messages; interface activation uses set_alt().
+	 *
+	 * Note CDC spec table 4 lists the ACM request profile.  It requires
+	 * encapsulated command support ... we don't handle any, and respond
+	 * to them by stalling.  Options include get/set/clear comm features
+	 * (not that useful) and SEND_BREAK.
 	 */
 	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
 
@@ -312,7 +341,7 @@ static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 		value = 0;
 
 		/* FIXME we should not allow data to flow until the
-		 * host sets the RS232_DTR bit; and when it clears
+		 * host sets the ACM_CTRL_DTR bit; and when it clears
 		 * that bit, we should return to that no-flow state.
 		 */
 		acm->port_handshake_bits = w_value;
@@ -350,9 +379,6 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 	/* we know alt == 0, so this is an activation or a reset */
 
 	if (intf == acm->ctrl_id) {
-		/* REVISIT this may need more work when we start to
-		 * send notifications ...
-		 */
 		if (acm->notify->driver_data) {
 			VDBG(cdev, "reset acm control interface %d\n", intf);
 			usb_ep_disable(acm->notify);
@@ -397,6 +423,128 @@ static void acm_disable(struct usb_function *f)
 
 /*-------------------------------------------------------------------------*/
 
+/**
+ * acm_cdc_notify - issue CDC notification to host
+ * @acm: wraps host to be notified
+ * @type: notification type
+ * @value: Refer to cdc specs, wValue field.
+ * @data: data to be sent
+ * @length: size of data
+ * Context: irqs blocked, acm->lock held, acm_notify_req non-null
+ *
+ * Returns zero on sucess or a negative errno.
+ *
+ * See section 6.3.5 of the CDC 1.1 specification for information
+ * about the only notification we issue:  SerialState change.
+ */
+static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value,
+		void *data, unsigned length)
+{
+	struct usb_ep			*ep = acm->notify;
+	struct usb_request		*req;
+	struct usb_cdc_notification	*notify;
+	const unsigned			len = sizeof(*notify) + length;
+	void				*buf;
+	int				status;
+
+	req = acm->notify_req;
+	acm->notify_req = NULL;
+	acm->pending = false;
+
+	req->length = len;
+	notify = req->buf;
+	buf = notify + 1;
+
+	notify->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS
+			| USB_RECIP_INTERFACE;
+	notify->bNotificationType = type;
+	notify->wValue = cpu_to_le16(value);
+	notify->wIndex = cpu_to_le16(acm->ctrl_id);
+	notify->wLength = cpu_to_le16(length);
+	memcpy(buf, data, length);
+
+	status = usb_ep_queue(ep, req, GFP_ATOMIC);
+	if (status < 0) {
+		ERROR(acm->port.func.config->cdev,
+				"acm ttyGS%d can't notify serial state, %d\n",
+				acm->port_num, status);
+		acm->notify_req = req;
+	}
+
+	return status;
+}
+
+static int acm_notify_serial_state(struct f_acm *acm)
+{
+	struct usb_composite_dev *cdev = acm->port.func.config->cdev;
+	int			status;
+
+	spin_lock(&acm->lock);
+	if (acm->notify_req) {
+		DBG(cdev, "acm ttyGS%d serial state %04x\n",
+				acm->port_num, acm->serial_state);
+		status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
+				0, &acm->serial_state, sizeof(acm->serial_state));
+	} else {
+		acm->pending = true;
+		status = 0;
+	}
+	spin_unlock(&acm->lock);
+	return status;
+}
+
+static void acm_cdc_notify_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_acm		*acm = req->context;
+	u8			doit = false;
+
+	/* on this call path we do NOT hold the port spinlock,
+	 * which is why ACM needs its own spinlock
+	 */
+	spin_lock(&acm->lock);
+	if (req->status != -ESHUTDOWN)
+		doit = acm->pending;
+	acm->notify_req = req;
+	spin_unlock(&acm->lock);
+
+	if (doit)
+		acm_notify_serial_state(acm);
+}
+
+/* connect == the TTY link is open */
+
+static void acm_connect(struct gserial *port)
+{
+	struct f_acm		*acm = port_to_acm(port);
+
+	acm->serial_state |= ACM_CTRL_DSR | ACM_CTRL_DCD;
+	acm_notify_serial_state(acm);
+}
+
+static void acm_disconnect(struct gserial *port)
+{
+	struct f_acm		*acm = port_to_acm(port);
+
+	acm->serial_state &= ~(ACM_CTRL_DSR | ACM_CTRL_DCD);
+	acm_notify_serial_state(acm);
+}
+
+static int acm_send_break(struct gserial *port, int duration)
+{
+	struct f_acm		*acm = port_to_acm(port);
+	u16			state;
+
+	state = acm->serial_state;
+	state &= ~ACM_CTRL_BRK;
+	if (duration)
+		state |= ACM_CTRL_BRK;
+
+	acm->serial_state = state;
+	return acm_notify_serial_state(acm);
+}
+
+/*-------------------------------------------------------------------------*/
+
 /* ACM function driver setup/binding */
 static int __init
 acm_bind(struct usb_configuration *c, struct usb_function *f)
@@ -445,8 +593,20 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
 	acm->notify = ep;
 	ep->driver_data = cdev;	/* claim */
 
+	/* allocate notification */
+	acm->notify_req = gs_alloc_req(ep,
+			sizeof(struct usb_cdc_notification) + 2,
+			GFP_KERNEL);
+	if (!acm->notify_req)
+		goto fail;
+
+	acm->notify_req->complete = acm_cdc_notify_complete;
+	acm->notify_req->context = acm;
+
 	/* copy descriptors, and track endpoint copies */
 	f->descriptors = usb_copy_descriptors(acm_fs_function);
+	if (!f->descriptors)
+		goto fail;
 
 	acm->fs.in = usb_find_endpoint(acm_fs_function,
 			f->descriptors, &acm_fs_in_desc);
@@ -478,8 +638,6 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
 				f->hs_descriptors, &acm_hs_notify_desc);
 	}
 
-	/* FIXME provide a callback for triggering notifications */
-
 	DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
 			acm->port_num,
 			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
@@ -488,6 +646,9 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
 	return 0;
 
 fail:
+	if (acm->notify_req)
+		gs_free_req(acm->notify, acm->notify_req);
+
 	/* we might as well release our claims on endpoints */
 	if (acm->notify)
 		acm->notify->driver_data = NULL;
@@ -504,10 +665,13 @@ fail:
 static void
 acm_unbind(struct usb_configuration *c, struct usb_function *f)
 {
+	struct f_acm		*acm = func_to_acm(f);
+
 	if (gadget_is_dualspeed(c->cdev->gadget))
 		usb_free_descriptors(f->hs_descriptors);
 	usb_free_descriptors(f->descriptors);
-	kfree(func_to_acm(f));
+	gs_free_req(acm->notify, acm->notify_req);
+	kfree(acm);
 }
 
 /* Some controllers can't support CDC ACM ... */
@@ -571,8 +735,14 @@ int __init acm_bind_config(struct usb_configuration *c, u8 port_num)
 	if (!acm)
 		return -ENOMEM;
 
+	spin_lock_init(&acm->lock);
+
 	acm->port_num = port_num;
 
+	acm->port.connect = acm_connect;
+	acm->port.disconnect = acm_disconnect;
+	acm->port.send_break = acm_send_break;
+
 	acm->port.func.name = "acm";
 	acm->port.func.strings = acm_strings;
 	/* descriptors are per-instance copies */
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 0822e9d7693..a2b5c092bda 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -63,9 +63,7 @@ struct f_ecm {
 
 	char				ethaddr[14];
 
-	struct usb_descriptor_header	**fs_function;
 	struct ecm_ep_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct ecm_ep_descs		hs;
 
 	struct usb_ep			*notify;
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 61652f0f13f..659b3d9671c 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -85,9 +85,7 @@ struct f_rndis {
 	u8				ethaddr[ETH_ALEN];
 	int				config;
 
-	struct usb_descriptor_header	**fs_function;
 	struct rndis_ep_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct rndis_ep_descs		hs;
 
 	struct usb_ep			*notify;
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index 1b6bde9aaed..fe5674db344 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -36,9 +36,7 @@ struct f_gser {
 	u8				data_id;
 	u8				port_num;
 
-	struct usb_descriptor_header	**fs_function;
 	struct gser_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct gser_descs		hs;
 };
 
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index afeab9a0523..acb8d233aa1 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -66,9 +66,7 @@ struct f_gether {
 
 	char				ethaddr[14];
 
-	struct usb_descriptor_header	**fs_function;
 	struct geth_descs		fs;
-	struct usb_descriptor_header	**hs_function;
 	struct geth_descs		hs;
 };
 
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 5246e8fef2b..17d9905101b 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -11,6 +11,10 @@
  * Some are available on 2.4 kernels; several are available, but not
  * yet pushed in the 2.6 mainline tree.
  */
+
+#ifndef __GADGET_CHIPS_H
+#define __GADGET_CHIPS_H
+
 #ifdef CONFIG_USB_GADGET_NET2280
 #define	gadget_is_net2280(g)	!strcmp("net2280", (g)->name)
 #else
@@ -237,3 +241,5 @@ static inline bool gadget_supports_altsettings(struct usb_gadget *gadget)
 	/* Everything else is *presumably* fine ... */
 	return true;
 }
+
+#endif /* __GADGET_CHIPS_H */
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 376e80c0753..574c53831a0 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -54,6 +54,7 @@
 
 #include <mach/dma.h>
 #include <mach/usb.h>
+#include <mach/control.h>
 
 #include "omap_udc.h"
 
@@ -2310,10 +2311,10 @@ static int proc_otg_show(struct seq_file *s)
 	u32		trans;
 	char		*ctrl_name;
 
-	tmp = OTG_REV_REG;
+	tmp = omap_readl(OTG_REV);
 	if (cpu_is_omap24xx()) {
 		ctrl_name = "control_devconf";
-		trans = CONTROL_DEVCONF_REG;
+		trans = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
 	} else {
 		ctrl_name = "tranceiver_ctrl";
 		trans = omap_readw(USB_TRANSCEIVER_CTRL);
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index abf9505d3a7..53d59287f2b 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -52,13 +52,16 @@
  * is managed in userspace ... OBEX, PTP, and MTP have been mentioned.
  */
 
+#define PREFIX	"ttyGS"
+
 /*
  * gserial is the lifecycle interface, used by USB functions
  * gs_port is the I/O nexus, used by the tty driver
  * tty_struct links to the tty/filesystem framework
  *
  * gserial <---> gs_port ... links will be null when the USB link is
- * inactive; managed by gserial_{connect,disconnect}().
+ * inactive; managed by gserial_{connect,disconnect}().  each gserial
+ * instance can wrap its own USB control protocol.
  *	gserial->ioport == usb_ep->driver_data ... gs_port
  *	gs_port->port_usb ... gserial
  *
@@ -100,6 +103,8 @@ struct gs_port {
 	wait_queue_head_t	close_wait;	/* wait for last close */
 
 	struct list_head	read_pool;
+	struct list_head	read_queue;
+	unsigned		n_read;
 	struct tasklet_struct	push;
 
 	struct list_head	write_pool;
@@ -177,7 +182,7 @@ static void gs_buf_clear(struct gs_buf *gb)
 /*
  * gs_buf_data_avail
  *
- * Return the number of bytes of data available in the circular
+ * Return the number of bytes of data written into the circular
  * buffer.
  */
 static unsigned gs_buf_data_avail(struct gs_buf *gb)
@@ -278,7 +283,7 @@ gs_buf_get(struct gs_buf *gb, char *buf, unsigned count)
  * Allocate a usb_request and its buffer.  Returns a pointer to the
  * usb_request or NULL if there is an error.
  */
-static struct usb_request *
+struct usb_request *
 gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
 {
 	struct usb_request *req;
@@ -302,7 +307,7 @@ gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
  *
  * Free a usb_request and its buffer.
  */
-static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
+void gs_free_req(struct usb_ep *ep, struct usb_request *req)
 {
 	kfree(req->buf);
 	usb_ep_free_request(ep, req);
@@ -367,11 +372,9 @@ __acquires(&port->port_lock)
 		req->length = len;
 		list_del(&req->list);
 
-#ifdef VERBOSE_DEBUG
-		pr_debug("%s: %s, len=%d, 0x%02x 0x%02x 0x%02x ...\n",
-				__func__, in->name, len, *((u8 *)req->buf),
+		pr_vdebug(PREFIX "%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
+				port->port_num, len, *((u8 *)req->buf),
 				*((u8 *)req->buf+1), *((u8 *)req->buf+2));
-#endif
 
 		/* Drop lock while we call out of driver; completions
 		 * could be issued while we do so.  Disconnection may
@@ -401,56 +404,6 @@ __acquires(&port->port_lock)
 	return status;
 }
 
-static void gs_rx_push(unsigned long _port)
-{
-	struct gs_port		*port = (void *)_port;
-	struct tty_struct	*tty = port->port_tty;
-
-	/* With low_latency, tty_flip_buffer_push() doesn't put its
-	 * real work through a workqueue, so the ldisc has a better
-	 * chance to keep up with peak USB data rates.
-	 */
-	if (tty) {
-		tty_flip_buffer_push(tty);
-		wake_up_interruptible(&tty->read_wait);
-	}
-}
-
-/*
- * gs_recv_packet
- *
- * Called for each USB packet received.  Reads the packet
- * header and stuffs the data in the appropriate tty buffer.
- * Returns 0 if successful, or a negative error number.
- *
- * Called during USB completion routine, on interrupt time.
- * With port_lock.
- */
-static int gs_recv_packet(struct gs_port *port, char *packet, unsigned size)
-{
-	unsigned		len;
-	struct tty_struct	*tty;
-
-	/* I/O completions can continue for a while after close(), until the
-	 * request queue empties.  Just discard any data we receive, until
-	 * something reopens this TTY ... as if there were no HW flow control.
-	 */
-	tty = port->port_tty;
-	if (tty == NULL) {
-		pr_vdebug("%s: ttyGS%d, after close\n",
-				__func__, port->port_num);
-		return -EIO;
-	}
-
-	len = tty_insert_flip_string(tty, packet, size);
-	if (len > 0)
-		tasklet_schedule(&port->push);
-	if (len < size)
-		pr_debug("%s: ttyGS%d, drop %d bytes\n",
-				__func__, port->port_num, size - len);
-	return 0;
-}
-
 /*
  * Context: caller owns port_lock, and port_usb is set
  */
@@ -469,9 +422,9 @@ __acquires(&port->port_lock)
 		int			status;
 		struct tty_struct	*tty;
 
-		/* no more rx if closed or throttled */
+		/* no more rx if closed */
 		tty = port->port_tty;
-		if (!tty || test_bit(TTY_THROTTLED, &tty->flags))
+		if (!tty)
 			break;
 
 		req = list_entry(pool->next, struct usb_request, list);
@@ -500,36 +453,134 @@ __acquires(&port->port_lock)
 	return started;
 }
 
-static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
+/*
+ * RX tasklet takes data out of the RX queue and hands it up to the TTY
+ * layer until it refuses to take any more data (or is throttled back).
+ * Then it issues reads for any further data.
+ *
+ * If the RX queue becomes full enough that no usb_request is queued,
+ * the OUT endpoint may begin NAKing as soon as its FIFO fills up.
+ * So QUEUE_SIZE packets plus however many the FIFO holds (usually two)
+ * can be buffered before the TTY layer's buffers (currently 64 KB).
+ */
+static void gs_rx_push(unsigned long _port)
 {
-	int		status;
-	struct gs_port	*port = ep->driver_data;
+	struct gs_port		*port = (void *)_port;
+	struct tty_struct	*tty;
+	struct list_head	*queue = &port->read_queue;
+	bool			disconnect = false;
+	bool			do_push = false;
 
-	spin_lock(&port->port_lock);
-	list_add(&req->list, &port->read_pool);
+	/* hand any queued data to the tty */
+	spin_lock_irq(&port->port_lock);
+	tty = port->port_tty;
+	while (!list_empty(queue)) {
+		struct usb_request	*req;
 
-	switch (req->status) {
-	case 0:
-		/* normal completion */
-		status = gs_recv_packet(port, req->buf, req->actual);
-		if (status && status != -EIO)
-			pr_debug("%s: %s %s err %d\n",
-				__func__, "recv", ep->name, status);
-		gs_start_rx(port);
-		break;
+		req = list_first_entry(queue, struct usb_request, list);
 
-	case -ESHUTDOWN:
-		/* disconnect */
-		pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
-		break;
+		/* discard data if tty was closed */
+		if (!tty)
+			goto recycle;
 
-	default:
-		/* presumably a transient fault */
-		pr_warning("%s: unexpected %s status %d\n",
-				__func__, ep->name, req->status);
-		gs_start_rx(port);
-		break;
+		/* leave data queued if tty was rx throttled */
+		if (test_bit(TTY_THROTTLED, &tty->flags))
+			break;
+
+		switch (req->status) {
+		case -ESHUTDOWN:
+			disconnect = true;
+			pr_vdebug(PREFIX "%d: shutdown\n", port->port_num);
+			break;
+
+		default:
+			/* presumably a transient fault */
+			pr_warning(PREFIX "%d: unexpected RX status %d\n",
+					port->port_num, req->status);
+			/* FALLTHROUGH */
+		case 0:
+			/* normal completion */
+			break;
+		}
+
+		/* push data to (open) tty */
+		if (req->actual) {
+			char		*packet = req->buf;
+			unsigned	size = req->actual;
+			unsigned	n;
+			int		count;
+
+			/* we may have pushed part of this packet already... */
+			n = port->n_read;
+			if (n) {
+				packet += n;
+				size -= n;
+			}
+
+			count = tty_insert_flip_string(tty, packet, size);
+			if (count)
+				do_push = true;
+			if (count != size) {
+				/* stop pushing; TTY layer can't handle more */
+				port->n_read += count;
+				pr_vdebug(PREFIX "%d: rx block %d/%d\n",
+						port->port_num,
+						count, req->actual);
+				break;
+			}
+			port->n_read = 0;
+		}
+recycle:
+		list_move(&req->list, &port->read_pool);
 	}
+
+	/* Push from tty to ldisc; this is immediate with low_latency, and
+	 * may trigger callbacks to this driver ... so drop the spinlock.
+	 */
+	if (tty && do_push) {
+		spin_unlock_irq(&port->port_lock);
+		tty_flip_buffer_push(tty);
+		wake_up_interruptible(&tty->read_wait);
+		spin_lock_irq(&port->port_lock);
+
+		/* tty may have been closed */
+		tty = port->port_tty;
+	}
+
+
+	/* We want our data queue to become empty ASAP, keeping data
+	 * in the tty and ldisc (not here).  If we couldn't push any
+	 * this time around, there may be trouble unless there's an
+	 * implicit tty_unthrottle() call on its way...
+	 *
+	 * REVISIT we should probably add a timer to keep the tasklet
+	 * from starving ... but it's not clear that case ever happens.
+	 */
+	if (!list_empty(queue) && tty) {
+		if (!test_bit(TTY_THROTTLED, &tty->flags)) {
+			if (do_push)
+				tasklet_schedule(&port->push);
+			else
+				pr_warning(PREFIX "%d: RX not scheduled?\n",
+					port->port_num);
+		}
+	}
+
+	/* If we're still connected, refill the USB RX queue. */
+	if (!disconnect && port->port_usb)
+		gs_start_rx(port);
+
+	spin_unlock_irq(&port->port_lock);
+}
+
+static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct gs_port	*port = ep->driver_data;
+
+	/* Queue all received data until the tty layer is ready for it. */
+	spin_lock(&port->port_lock);
+	list_add_tail(&req->list, &port->read_queue);
+	tasklet_schedule(&port->push);
 	spin_unlock(&port->port_lock);
 }
 
@@ -625,6 +676,7 @@ static int gs_start_io(struct gs_port *port)
 	}
 
 	/* queue read requests */
+	port->n_read = 0;
 	started = gs_start_rx(port);
 
 	/* unblock any pending writes into our circular buffer */
@@ -633,9 +685,10 @@ static int gs_start_io(struct gs_port *port)
 	} else {
 		gs_free_requests(ep, head);
 		gs_free_requests(port->port_usb->in, &port->write_pool);
+		status = -EIO;
 	}
 
-	return started ? 0 : status;
+	return status;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -736,10 +789,13 @@ static int gs_open(struct tty_struct *tty, struct file *file)
 
 	/* if connected, start the I/O stream */
 	if (port->port_usb) {
+		struct gserial	*gser = port->port_usb;
+
 		pr_debug("gs_open: start ttyGS%d\n", port->port_num);
 		gs_start_io(port);
 
-		/* REVISIT for ACM, issue "network connected" event */
+		if (gser->connect)
+			gser->connect(gser);
 	}
 
 	pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file);
@@ -766,6 +822,7 @@ static int gs_writes_finished(struct gs_port *p)
 static void gs_close(struct tty_struct *tty, struct file *file)
 {
 	struct gs_port *port = tty->driver_data;
+	struct gserial	*gser;
 
 	spin_lock_irq(&port->port_lock);
 
@@ -785,32 +842,31 @@ static void gs_close(struct tty_struct *tty, struct file *file)
 	port->openclose = true;
 	port->open_count = 0;
 
-	if (port->port_usb)
-		/* REVISIT for ACM, issue "network disconnected" event */;
+	gser = port->port_usb;
+	if (gser && gser->disconnect)
+		gser->disconnect(gser);
 
 	/* wait for circular write buffer to drain, disconnect, or at
 	 * most GS_CLOSE_TIMEOUT seconds; then discard the rest
 	 */
-	if (gs_buf_data_avail(&port->port_write_buf) > 0
-			&& port->port_usb) {
+	if (gs_buf_data_avail(&port->port_write_buf) > 0 && gser) {
 		spin_unlock_irq(&port->port_lock);
 		wait_event_interruptible_timeout(port->drain_wait,
 					gs_writes_finished(port),
 					GS_CLOSE_TIMEOUT * HZ);
 		spin_lock_irq(&port->port_lock);
+		gser = port->port_usb;
 	}
 
 	/* Iff we're disconnected, there can be no I/O in flight so it's
 	 * ok to free the circular buffer; else just scrub it.  And don't
 	 * let the push tasklet fire again until we're re-opened.
 	 */
-	if (port->port_usb == NULL)
+	if (gser == NULL)
 		gs_buf_free(&port->port_write_buf);
 	else
 		gs_buf_clear(&port->port_write_buf);
 
-	tasklet_kill(&port->push);
-
 	tty->driver_data = NULL;
 	port->port_tty = NULL;
 
@@ -911,15 +967,35 @@ static void gs_unthrottle(struct tty_struct *tty)
 {
 	struct gs_port		*port = tty->driver_data;
 	unsigned long		flags;
-	unsigned		started = 0;
 
 	spin_lock_irqsave(&port->port_lock, flags);
-	if (port->port_usb)
-		started = gs_start_rx(port);
+	if (port->port_usb) {
+		/* Kickstart read queue processing.  We don't do xon/xoff,
+		 * rts/cts, or other handshaking with the host, but if the
+		 * read queue backs up enough we'll be NAKing OUT packets.
+		 */
+		tasklet_schedule(&port->push);
+		pr_vdebug(PREFIX "%d: unthrottle\n", port->port_num);
+	}
 	spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static int gs_break_ctl(struct tty_struct *tty, int duration)
+{
+	struct gs_port	*port = tty->driver_data;
+	int		status = 0;
+	struct gserial	*gser;
+
+	pr_vdebug("gs_break_ctl: ttyGS%d, send break (%d) \n",
+			port->port_num, duration);
 
-	pr_vdebug("gs_unthrottle: ttyGS%d, %d packets\n",
-			port->port_num, started);
+	spin_lock_irq(&port->port_lock);
+	gser = port->port_usb;
+	if (gser && gser->send_break)
+		status = gser->send_break(gser, duration);
+	spin_unlock_irq(&port->port_lock);
+
+	return status;
 }
 
 static const struct tty_operations gs_tty_ops = {
@@ -931,6 +1007,7 @@ static const struct tty_operations gs_tty_ops = {
 	.write_room =		gs_write_room,
 	.chars_in_buffer =	gs_chars_in_buffer,
 	.unthrottle =		gs_unthrottle,
+	.break_ctl =		gs_break_ctl,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -953,6 +1030,7 @@ gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
 	tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
 
 	INIT_LIST_HEAD(&port->read_pool);
+	INIT_LIST_HEAD(&port->read_queue);
 	INIT_LIST_HEAD(&port->write_pool);
 
 	port->port_num = port_num;
@@ -997,7 +1075,7 @@ int __init gserial_setup(struct usb_gadget *g, unsigned count)
 
 	gs_tty_driver->owner = THIS_MODULE;
 	gs_tty_driver->driver_name = "g_serial";
-	gs_tty_driver->name = "ttyGS";
+	gs_tty_driver->name = PREFIX;
 	/* uses dynamically assigned dev_t values */
 
 	gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
@@ -1104,6 +1182,8 @@ void gserial_cleanup(void)
 		ports[i].port = NULL;
 		mutex_unlock(&ports[i].lock);
 
+		tasklet_kill(&port->push);
+
 		/* wait for old opens to finish */
 		wait_event(port->close_wait, gs_closed(port));
 
@@ -1175,14 +1255,17 @@ int gserial_connect(struct gserial *gser, u8 port_num)
 
 	/* REVISIT if waiting on "carrier detect", signal. */
 
-	/* REVISIT for ACM, issue "network connection" status notification:
-	 * connected if open_count, else disconnected.
+	/* if it's already open, start I/O ... and notify the serial
+	 * protocol about open/close status (connect/disconnect).
 	 */
-
-	/* if it's already open, start I/O */
 	if (port->open_count) {
 		pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
 		gs_start_io(port);
+		if (gser->connect)
+			gser->connect(gser);
+	} else {
+		if (gser->disconnect)
+			gser->disconnect(gser);
 	}
 
 	spin_unlock_irqrestore(&port->port_lock, flags);
@@ -1241,6 +1324,7 @@ void gserial_disconnect(struct gserial *gser)
 	if (port->open_count == 0 && !port->openclose)
 		gs_buf_free(&port->port_write_buf);
 	gs_free_requests(gser->out, &port->read_pool);
+	gs_free_requests(gser->out, &port->read_queue);
 	gs_free_requests(gser->in, &port->write_pool);
 	spin_unlock_irqrestore(&port->port_lock, flags);
 }
diff --git a/drivers/usb/gadget/u_serial.h b/drivers/usb/gadget/u_serial.h
index 7b561138f90..af3910d01ae 100644
--- a/drivers/usb/gadget/u_serial.h
+++ b/drivers/usb/gadget/u_serial.h
@@ -23,8 +23,7 @@
  * style I/O using the USB peripheral endpoints listed here, including
  * hookups to sysfs and /dev for each logical "tty" device.
  *
- * REVISIT need TTY --> USB event flow too, so ACM can report open/close
- * as carrier detect events.  Model after ECM.  There's more ACM state too.
+ * REVISIT at least ACM could support tiocmget() if needed.
  *
  * REVISIT someday, allow multiplexing several TTYs over these endpoints.
  */
@@ -41,8 +40,17 @@ struct gserial {
 
 	/* REVISIT avoid this CDC-ACM support harder ... */
 	struct usb_cdc_line_coding port_line_coding;	/* 9600-8-N-1 etc */
+
+	/* notification callbacks */
+	void (*connect)(struct gserial *p);
+	void (*disconnect)(struct gserial *p);
+	int (*send_break)(struct gserial *p, int duration);
 };
 
+/* utilities to allocate/free request and buffer */
+struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t flags);
+void gs_free_req(struct usb_ep *, struct usb_request *req);
+
 /* port setup/teardown is handled by gadget driver */
 int gserial_setup(struct usb_gadget *g, unsigned n_ports);
 void gserial_cleanup(void);
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 5fbdc14e63b..5416cf96900 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mbus.h>
-#include <asm/plat-orion/ehci-orion.h>
+#include <plat/ehci-orion.h>
 
 #define rdl(off)	__raw_readl(hcd->regs + (off))
 #define wrl(off, val)	__raw_writel((val), hcd->regs + (off))
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index c858f2adb92..d22a84f86a3 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -126,9 +126,8 @@ static void isp1760_writel(const unsigned int val, __u32 __iomem *regs)
  * doesn't quite work because some people have to enforce 32-bit access
  */
 static void priv_read_copy(struct isp1760_hcd *priv, u32 *src,
-		__u32 __iomem *dst, u32 offset, u32 len)
+		__u32 __iomem *dst, u32 len)
 {
-	struct usb_hcd *hcd = priv_to_hcd(priv);
 	u32 val;
 	u8 *buff8;
 
@@ -136,11 +135,6 @@ static void priv_read_copy(struct isp1760_hcd *priv, u32 *src,
 		printk(KERN_ERR "ERROR: buffer: %p len: %d\n", src, len);
 		return;
 	}
-	isp1760_writel(offset,  hcd->regs + HC_MEMORY_REG);
-	/* XXX
-	 * 90nsec delay, the spec says something how this could be avoided.
-	 */
-	mdelay(1);
 
 	while (len >= 4) {
 		*src = __raw_readl(dst);
@@ -987,8 +981,20 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 			printk(KERN_ERR "qh is 0\n");
 			continue;
 		}
-		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs,
-				atl_regs, sizeof(ptd));
+		isp1760_writel(atl_regs + ISP_BANK(0), usb_hcd->regs +
+				HC_MEMORY_REG);
+		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+				HC_MEMORY_REG);
+		/*
+		 * write bank1 address twice to ensure the 90ns delay (time
+		 * between BANK0 write and the priv_read_copy() call is at
+		 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns)
+		 */
+		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+				HC_MEMORY_REG);
+
+		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs +
+				ISP_BANK(0), sizeof(ptd));
 
 		dw1 = le32_to_cpu(ptd.dw1);
 		dw2 = le32_to_cpu(ptd.dw2);
@@ -1091,7 +1097,7 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 			case IN_PID:
 				priv_read_copy(priv,
 					priv->atl_ints[queue_entry].data_buffer,
-					usb_hcd->regs + payload, payload,
+					usb_hcd->regs + payload + ISP_BANK(1),
 					length);
 
 			case OUT_PID:
@@ -1122,11 +1128,11 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 		} else if (usb_pipebulk(urb->pipe) && (length < qtd->length)) {
 			/* short BULK received */
 
-			printk(KERN_ERR "short bulk, %d instead %zu\n", length,
-					qtd->length);
 			if (urb->transfer_flags & URB_SHORT_NOT_OK) {
 				urb->status = -EREMOTEIO;
-				printk(KERN_ERR "not okey\n");
+				isp1760_dbg(priv, "short bulk, %d instead %zu "
+					"with URB_SHORT_NOT_OK flag.\n",
+					length, qtd->length);
 			}
 
 			if (urb->status == -EINPROGRESS)
@@ -1206,8 +1212,20 @@ static void do_intl_int(struct usb_hcd *usb_hcd)
 			continue;
 		}
 
-		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs,
-				int_regs, sizeof(ptd));
+		isp1760_writel(int_regs + ISP_BANK(0), usb_hcd->regs +
+				HC_MEMORY_REG);
+		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+				HC_MEMORY_REG);
+		/*
+		 * write bank1 address twice to ensure the 90ns delay (time
+		 * between BANK0 write and the priv_read_copy() call is at
+		 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns)
+		 */
+		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
+				HC_MEMORY_REG);
+
+		priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs +
+				ISP_BANK(0), sizeof(ptd));
 		dw1 = le32_to_cpu(ptd.dw1);
 		dw3 = le32_to_cpu(ptd.dw3);
 		check_int_err_status(le32_to_cpu(ptd.dw4));
@@ -1242,7 +1260,7 @@ static void do_intl_int(struct usb_hcd *usb_hcd)
 			case IN_PID:
 				priv_read_copy(priv,
 					priv->int_ints[queue_entry].data_buffer,
-					usb_hcd->regs + payload , payload,
+					usb_hcd->regs + payload + ISP_BANK(1),
 					length);
 			case OUT_PID:
 
@@ -1615,8 +1633,7 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 		return -EPIPE;
 	}
 
-	isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe);
-	return 0;
+	return isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe);
 }
 
 static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
index 6473dd86993..4377277667d 100644
--- a/drivers/usb/host/isp1760-hcd.h
+++ b/drivers/usb/host/isp1760-hcd.h
@@ -54,6 +54,8 @@ void deinit_kmem_cache(void);
 #define BUFFER_MAP		0x7
 
 #define HC_MEMORY_REG		0x33c
+#define ISP_BANK(x)		((x) << 16)
+
 #define HC_PORT1_CTRL		0x374
 #define PORT1_POWER		(3 << 3)
 #define PORT1_INIT1		(1 << 7)
@@ -119,6 +121,9 @@ struct inter_packet_info {
 typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
 		struct isp1760_qtd *qtd);
 
+#define isp1760_dbg(priv, fmt, args...) \
+	dev_dbg(priv_to_hcd(priv)->self.controller, fmt, ##args)
+
 #define isp1760_info(priv, fmt, args...) \
 	dev_info(priv_to_hcd(priv)->self.controller, fmt, ##args)
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 26bc47941d0..89901962cbf 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -86,6 +86,21 @@ static void ohci_stop (struct usb_hcd *hcd);
 static int ohci_restart (struct ohci_hcd *ohci);
 #endif
 
+#ifdef CONFIG_PCI
+static void quirk_amd_pll(int state);
+static void amd_iso_dev_put(void);
+#else
+static inline void quirk_amd_pll(int state)
+{
+	return;
+}
+static inline void amd_iso_dev_put(void)
+{
+	return;
+}
+#endif
+
+
 #include "ohci-hub.c"
 #include "ohci-dbg.c"
 #include "ohci-mem.c"
@@ -483,6 +498,9 @@ static int ohci_init (struct ohci_hcd *ohci)
 	int ret;
 	struct usb_hcd *hcd = ohci_to_hcd(ohci);
 
+	if (distrust_firmware)
+		ohci->flags |= OHCI_QUIRK_HUB_POWER;
+
 	disable (ohci);
 	ohci->regs = hcd->regs;
 
@@ -689,7 +707,8 @@ retry:
 		temp |= RH_A_NOCP;
 		temp &= ~(RH_A_POTPGT | RH_A_NPS);
 		ohci_writel (ohci, temp, &ohci->regs->roothub.a);
-	} else if ((ohci->flags & OHCI_QUIRK_AMD756) || distrust_firmware) {
+	} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
+			(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
 		/* hub power always on; required for AMD-756 and some
 		 * Mac platforms.  ganged overcurrent reporting, if any.
 		 */
@@ -882,6 +901,8 @@ static void ohci_stop (struct usb_hcd *hcd)
 
 	if (quirk_zfmicro(ohci))
 		del_timer(&ohci->unlink_watchdog);
+	if (quirk_amdiso(ohci))
+		amd_iso_dev_put();
 
 	remove_debug_files (ohci);
 	ohci_mem_cleanup (ohci);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index b56739221d1..439beb784f3 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -483,6 +483,13 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 		length++;
 	}
 
+	/* Some broken controllers never turn off RHCS in the interrupt
+	 * status register.  For their sake we won't re-enable RHSC
+	 * interrupts if the flag is already set.
+	 */
+	if (ohci_readl(ohci, &ohci->regs->intrstatus) & OHCI_INTR_RHSC)
+		changed = 1;
+
 	/* look at each port */
 	for (i = 0; i < ohci->num_ports; i++) {
 		u32	status = roothub_portstatus (ohci, i);
@@ -572,8 +579,6 @@ static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
 	return 0;
 }
 
-static void start_hnp(struct ohci_hcd *ohci);
-
 #else
 
 #define	ohci_start_port_reset		NULL
@@ -760,7 +765,7 @@ static int ohci_hub_control (
 #ifdef	CONFIG_USB_OTG
 			if (hcd->self.otg_port == (wIndex + 1)
 					&& hcd->self.b_hnp_enable)
-				start_hnp(ohci);
+				ohci->start_hnp(ohci);
 			else
 #endif
 			ohci_writel (ohci, RH_PS_PSS,
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 94dfca02f7e..3d532b70967 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -225,6 +225,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 			dev_err(hcd->self.controller, "can't find transceiver\n");
 			return -ENODEV;
 		}
+		ohci->start_hnp = start_hnp;
 	}
 #endif
 
@@ -260,7 +261,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 			omap_cfg_reg(W4_USB_HIGHZ);
 		}
 		ohci_writel(ohci, rh, &ohci->regs->roothub.a);
-		distrust_firmware = 0;
+		ohci->flags &= ~OHCI_QUIRK_HUB_POWER;
 	} else if (machine_is_nokia770()) {
 		/* We require a self-powered hub, which should have
 		 * plenty of power. */
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 4696cc912e1..083e8df0a81 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -18,6 +18,28 @@
 #error "This file is PCI bus glue.  CONFIG_PCI must be defined."
 #endif
 
+#include <linux/pci.h>
+#include <linux/io.h>
+
+
+/* constants used to work around PM-related transfer
+ * glitches in some AMD 700 series southbridges
+ */
+#define AB_REG_BAR	0xf0
+#define AB_INDX(addr)	((addr) + 0x00)
+#define AB_DATA(addr)	((addr) + 0x04)
+#define AX_INDXC	0X30
+#define AX_DATAC	0x34
+
+#define NB_PCIE_INDX_ADDR	0xe0
+#define NB_PCIE_INDX_DATA	0xe4
+#define PCIE_P_CNTL		0x10040
+#define BIF_NB			0x10002
+
+static struct pci_dev *amd_smbus_dev;
+static struct pci_dev *amd_hb_dev;
+static int amd_ohci_iso_count;
+
 /*-------------------------------------------------------------------------*/
 
 static int broken_suspend(struct usb_hcd *hcd)
@@ -143,6 +165,103 @@ static int ohci_quirk_nec(struct usb_hcd *hcd)
 	return 0;
 }
 
+static int ohci_quirk_amd700(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	u8 rev = 0;
+
+	if (!amd_smbus_dev)
+		amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+				PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+	if (!amd_smbus_dev)
+		return 0;
+
+	pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+	if ((rev > 0x3b) || (rev < 0x30)) {
+		pci_dev_put(amd_smbus_dev);
+		amd_smbus_dev = NULL;
+		return 0;
+	}
+
+	amd_ohci_iso_count++;
+
+	if (!amd_hb_dev)
+		amd_hb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9600, NULL);
+
+	ohci->flags |= OHCI_QUIRK_AMD_ISO;
+	ohci_dbg(ohci, "enabled AMD ISO transfers quirk\n");
+
+	return 0;
+}
+
+/*
+ * The hardware normally enables the A-link power management feature, which
+ * lets the system lower the power consumption in idle states.
+ *
+ * Assume the system is configured to have USB 1.1 ISO transfers going
+ * to or from a USB device.  Without this quirk, that stream may stutter
+ * or have breaks occasionally.  For transfers going to speakers, this
+ * makes a very audible mess...
+ *
+ * That audio playback corruption is due to the audio stream getting
+ * interrupted occasionally when the link goes in lower power state
+ * This USB quirk prevents the link going into that lower power state
+ * during audio playback or other ISO operations.
+ */
+static void quirk_amd_pll(int on)
+{
+	u32 addr;
+	u32 val;
+	u32 bit = (on > 0) ? 1 : 0;
+
+	pci_read_config_dword(amd_smbus_dev, AB_REG_BAR, &addr);
+
+	/* BIT names/meanings are NDA-protected, sorry ... */
+
+	outl(AX_INDXC, AB_INDX(addr));
+	outl(0x40, AB_DATA(addr));
+	outl(AX_DATAC, AB_INDX(addr));
+	val = inl(AB_DATA(addr));
+	val &= ~((1 << 3) | (1 << 4) | (1 << 9));
+	val |= (bit << 3) | ((!bit) << 4) | ((!bit) << 9);
+	outl(val, AB_DATA(addr));
+
+	if (amd_hb_dev) {
+		addr = PCIE_P_CNTL;
+		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
+
+		pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
+		val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
+		val |= bit | (bit << 3) | (bit << 12);
+		val |= ((!bit) << 4) | ((!bit) << 9);
+		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
+
+		addr = BIF_NB;
+		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
+
+		pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
+		val &= ~(1 << 8);
+		val |= bit << 8;
+		pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
+	}
+}
+
+static void amd_iso_dev_put(void)
+{
+	amd_ohci_iso_count--;
+	if (amd_ohci_iso_count == 0) {
+		if (amd_smbus_dev) {
+			pci_dev_put(amd_smbus_dev);
+			amd_smbus_dev = NULL;
+		}
+		if (amd_hb_dev) {
+			pci_dev_put(amd_hb_dev);
+			amd_hb_dev = NULL;
+		}
+	}
+
+}
+
 /* List of quirks for OHCI */
 static const struct pci_device_id ohci_pci_quirks[] = {
 	{
@@ -181,6 +300,19 @@ static const struct pci_device_id ohci_pci_quirks[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
 		.driver_data = (unsigned long) broken_suspend,
 	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
+		.driver_data = (unsigned long)ohci_quirk_amd700,
+	},
+
 	/* FIXME for some of the early AMD 760 southbridges, OHCI
 	 * won't work at all.  blacklist them.
 	 */
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 6a9b4c55795..c2d80f80448 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -49,6 +49,9 @@ __acquires(ohci->lock)
 	switch (usb_pipetype (urb->pipe)) {
 	case PIPE_ISOCHRONOUS:
 		ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--;
+		if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
+				&& quirk_amdiso(ohci))
+			quirk_amd_pll(1);
 		break;
 	case PIPE_INTERRUPT:
 		ohci_to_hcd(ohci)->self.bandwidth_int_reqs--;
@@ -677,6 +680,9 @@ static void td_submit_urb (
 				data + urb->iso_frame_desc [cnt].offset,
 				urb->iso_frame_desc [cnt].length, urb, cnt);
 		}
+		if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
+				&& quirk_amdiso(ohci))
+			quirk_amd_pll(0);
 		periodic = ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs++ == 0
 			&& ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0;
 		break;
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index dc544ddc784..faf622eafce 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -371,6 +371,7 @@ struct ohci_hcd {
 	 * other external transceivers should be software-transparent
 	 */
 	struct otg_transceiver	*transceiver;
+	void (*start_hnp)(struct ohci_hcd *ohci);
 
 	/*
 	 * memory management for queue data structures
@@ -399,6 +400,8 @@ struct ohci_hcd {
 #define	OHCI_QUIRK_ZFMICRO	0x20			/* Compaq ZFMicro chipset*/
 #define	OHCI_QUIRK_NEC		0x40			/* lost interrupts */
 #define	OHCI_QUIRK_FRAME_NO	0x80			/* no big endian frame_no shift */
+#define	OHCI_QUIRK_HUB_POWER	0x100			/* distrust firmware power/oc setup */
+#define	OHCI_QUIRK_AMD_ISO	0x200			/* ISO transfers*/
 	// there are also chip quirks/bugs in init logic
 
 	struct work_struct	nec_work;	/* Worker for NEC quirk */
@@ -426,6 +429,10 @@ static inline int quirk_zfmicro(struct ohci_hcd *ohci)
 {
 	return ohci->flags & OHCI_QUIRK_ZFMICRO;
 }
+static inline int quirk_amdiso(struct ohci_hcd *ohci)
+{
+	return ohci->flags & OHCI_QUIRK_AMD_ISO;
+}
 #else
 static inline int quirk_nec(struct ohci_hcd *ohci)
 {
@@ -435,6 +442,10 @@ static inline int quirk_zfmicro(struct ohci_hcd *ohci)
 {
 	return 0;
 }
+static inline int quirk_amdiso(struct ohci_hcd *ohci)
+{
+	return 0;
+}
 #endif
 
 /* convert between an hcd pointer and the corresponding ohci_hcd */
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index d5f02dddb12..ea7126f99ca 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -964,11 +964,34 @@ static void pipe_irq_disable(struct r8a66597 *r8a66597, u16 pipenum)
 	disable_irq_nrdy(r8a66597, pipenum);
 }
 
+static void r8a66597_root_hub_start_polling(struct r8a66597 *r8a66597)
+{
+	mod_timer(&r8a66597->rh_timer,
+			jiffies + msecs_to_jiffies(R8A66597_RH_POLL_TIME));
+}
+
+static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port,
+					int connect)
+{
+	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+
+	rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
+	rh->scount = R8A66597_MAX_SAMPLING;
+	if (connect)
+		rh->port |= 1 << USB_PORT_FEAT_CONNECTION;
+	else
+		rh->port &= ~(1 << USB_PORT_FEAT_CONNECTION);
+	rh->port |= 1 << USB_PORT_FEAT_C_CONNECTION;
+
+	r8a66597_root_hub_start_polling(r8a66597);
+}
+
 /* this function must be called with interrupt disabled */
 static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port,
 					u16 syssts)
 {
 	if (syssts == SE0) {
+		r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
 		r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
 		return;
 	}
@@ -1002,13 +1025,10 @@ static void r8a66597_usb_disconnect(struct r8a66597 *r8a66597, int port)
 {
 	struct r8a66597_device *dev = r8a66597->root_hub[port].dev;
 
-	r8a66597->root_hub[port].port &= ~(1 << USB_PORT_FEAT_CONNECTION);
-	r8a66597->root_hub[port].port |= (1 << USB_PORT_FEAT_C_CONNECTION);
-
 	disable_r8a66597_pipe_all(r8a66597, dev);
 	free_usb_address(r8a66597, dev);
 
-	r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
+	start_root_hub_sampling(r8a66597, port, 0);
 }
 
 /* this function must be called with interrupt disabled */
@@ -1551,23 +1571,6 @@ static void irq_pipe_nrdy(struct r8a66597 *r8a66597)
 	}
 }
 
-static void r8a66597_root_hub_start_polling(struct r8a66597 *r8a66597)
-{
-	mod_timer(&r8a66597->rh_timer,
-			jiffies + msecs_to_jiffies(R8A66597_RH_POLL_TIME));
-}
-
-static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port)
-{
-	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
-
-	rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
-	rh->scount = R8A66597_MAX_SAMPLING;
-	r8a66597->root_hub[port].port |= (1 << USB_PORT_FEAT_CONNECTION)
-					 | (1 << USB_PORT_FEAT_C_CONNECTION);
-	r8a66597_root_hub_start_polling(r8a66597);
-}
-
 static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
 {
 	struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd);
@@ -1594,7 +1597,7 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
 			r8a66597_bclr(r8a66597, ATTCHE, INTENB2);
 
 			/* start usb bus sampling */
-			start_root_hub_sampling(r8a66597, 1);
+			start_root_hub_sampling(r8a66597, 1, 1);
 		}
 		if (mask2 & DTCH) {
 			r8a66597_write(r8a66597, ~DTCH, INTSTS2);
@@ -1609,7 +1612,7 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd)
 			r8a66597_bclr(r8a66597, ATTCHE, INTENB1);
 
 			/* start usb bus sampling */
-			start_root_hub_sampling(r8a66597, 0);
+			start_root_hub_sampling(r8a66597, 0, 1);
 		}
 		if (mask1 & DTCH) {
 			r8a66597_write(r8a66597, ~DTCH, INTSTS1);
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 001789c9a11..4ea50e0abcb 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -42,16 +42,6 @@ config USB_ADUTUX
 	  To compile this driver as a module, choose M here.  The module
 	  will be called adutux.
 
-config USB_AUERSWALD
-	tristate "USB Auerswald ISDN support"
-	depends on USB
-	help
-	  Say Y here if you want to connect an Auerswald USB ISDN Device
-	  to your computer's USB port.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called auerswald.
-
 config USB_RIO500
 	tristate "USB Diamond Rio500 support"
 	depends on USB
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index aba091cb5ec..45b4e12afb0 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -5,7 +5,6 @@
 
 obj-$(CONFIG_USB_ADUTUX)	+= adutux.o
 obj-$(CONFIG_USB_APPLEDISPLAY)	+= appledisplay.o
-obj-$(CONFIG_USB_AUERSWALD)	+= auerswald.o
 obj-$(CONFIG_USB_BERRY_CHARGE)	+= berry_charge.o
 obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
 obj-$(CONFIG_USB_CYTHERM)	+= cytherm.o
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
deleted file mode 100644
index d2f61d5510e..00000000000
--- a/drivers/usb/misc/auerswald.c
+++ /dev/null
@@ -1,2152 +0,0 @@
-/*****************************************************************************/
-/*
- *      auerswald.c  --  Auerswald PBX/System Telephone usb driver.
- *
- *      Copyright (C) 2001  Wolfgang Mües (wolfgang@iksw-muees.de)
- *
- *      Very much code of this driver is borrowed from dabusb.c (Deti Fliegl)
- *      and from the USB Skeleton driver (Greg Kroah-Hartman). Thank you.
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
- /*****************************************************************************/
-
-/* Standard Linux module include files */
-#include <asm/uaccess.h>
-#include <asm/byteorder.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <linux/usb.h>
-#include <linux/mutex.h>
-
-/*-------------------------------------------------------------------*/
-/* Debug support 						     */
-#ifdef DEBUG
-#define dump( adr, len) \
-do {			\
-	unsigned int u;	\
-	printk (KERN_DEBUG); \
-	for (u = 0; u < len; u++) \
-		printk (" %02X", adr[u] & 0xFF); \
-	printk ("\n"); \
-} while (0)
-#else
-#define dump( adr, len)
-#endif
-
-/*-------------------------------------------------------------------*/
-/* Version Information */
-#define DRIVER_VERSION "0.9.11"
-#define DRIVER_AUTHOR  "Wolfgang Mües <wolfgang@iksw-muees.de>"
-#define DRIVER_DESC    "Auerswald PBX/System Telephone usb driver"
-
-/*-------------------------------------------------------------------*/
-/* Private declarations for Auerswald USB driver                     */
-
-/* Auerswald Vendor ID */
-#define ID_AUERSWALD  	0x09BF
-
-#define AUER_MINOR_BASE	112	/* auerswald driver minor number */
-
-/* we can have up to this number of device plugged in at once */
-#define AUER_MAX_DEVICES 16
-
-
-/* Number of read buffers for each device */
-#define AU_RBUFFERS     10
-
-/* Number of chain elements for each control chain */
-#define AUCH_ELEMENTS   20
-
-/* Number of retries in communication */
-#define AU_RETRIES	10
-
-/*-------------------------------------------------------------------*/
-/* vendor specific protocol                                          */
-/* Header Byte */
-#define AUH_INDIRMASK   0x80    /* mask for direct/indirect bit */
-#define AUH_DIRECT      0x00    /* data is for USB device */
-#define AUH_INDIRECT    0x80    /* USB device is relay */
-
-#define AUH_SPLITMASK   0x40    /* mask for split bit */
-#define AUH_UNSPLIT     0x00    /* data block is full-size */
-#define AUH_SPLIT       0x40    /* data block is part of a larger one,
-                                   split-byte follows */
-
-#define AUH_TYPEMASK    0x3F    /* mask for type of data transfer */
-#define AUH_TYPESIZE    0x40    /* different types */
-#define AUH_DCHANNEL    0x00    /* D channel data */
-#define AUH_B1CHANNEL   0x01    /* B1 channel transparent */
-#define AUH_B2CHANNEL   0x02    /* B2 channel transparent */
-/*                0x03..0x0F       reserved for driver internal use */
-#define AUH_COMMAND     0x10    /* Command channel */
-#define AUH_BPROT       0x11    /* Configuration block protocol */
-#define AUH_DPROTANA    0x12    /* D channel protocol analyzer */
-#define AUH_TAPI        0x13    /* telephone api data (ATD) */
-/*                0x14..0x3F       reserved for other protocols */
-#define AUH_UNASSIGNED  0xFF    /* if char device has no assigned service */
-#define AUH_FIRSTUSERCH 0x11    /* first channel which is available for driver users */
-
-#define AUH_SIZE	1 	/* Size of Header Byte */
-
-/* Split Byte. Only present if split bit in header byte set.*/
-#define AUS_STARTMASK   0x80    /* mask for first block of splitted frame */
-#define AUS_FIRST       0x80    /* first block */
-#define AUS_FOLLOW      0x00    /* following block */
-
-#define AUS_ENDMASK     0x40    /* mask for last block of splitted frame */
-#define AUS_END         0x40    /* last block */
-#define AUS_NOEND       0x00    /* not the last block */
-
-#define AUS_LENMASK     0x3F    /* mask for block length information */
-
-/* Request types */
-#define AUT_RREQ        (USB_DIR_IN  | USB_TYPE_VENDOR | USB_RECIP_OTHER)   /* Read Request */
-#define AUT_WREQ        (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER)   /* Write Request */
-
-/* Vendor Requests */
-#define AUV_GETINFO     0x00    /* GetDeviceInfo */
-#define AUV_WBLOCK      0x01    /* Write Block */
-#define AUV_RBLOCK      0x02    /* Read Block */
-#define AUV_CHANNELCTL  0x03    /* Channel Control */
-#define AUV_DUMMY	0x04	/* Dummy Out for retry */
-
-/* Device Info Types */
-#define AUDI_NUMBCH     0x0000  /* Number of supported B channels */
-#define AUDI_OUTFSIZE   0x0001  /* Size of OUT B channel fifos */
-#define AUDI_MBCTRANS   0x0002  /* max. Blocklength of control transfer */
-
-/* Interrupt endpoint definitions */
-#define AU_IRQENDP      1       /* Endpoint number */
-#define AU_IRQCMDID     16      /* Command-block ID */
-#define AU_BLOCKRDY     0       /* Command: Block data ready on ctl endpoint */
-#define AU_IRQMINSIZE	5	/* Nr. of bytes decoded in this driver */
-
-/* Device String Descriptors */
-#define AUSI_VENDOR   	1	/* "Auerswald GmbH & Co. KG" */
-#define AUSI_DEVICE   	2	/* Name of the Device */
-#define AUSI_SERIALNR 	3	/* Serial Number */
-#define AUSI_MSN      	4	/* "MSN ..." (first) Multiple Subscriber Number */
-
-#define AUSI_DLEN	100	/* Max. Length of Device Description */
-
-#define AUV_RETRY	0x101	/* First Firmware version which can do control retries */
-
-/*-------------------------------------------------------------------*/
-/* External data structures / Interface                              */
-typedef struct
-{
-	char __user *buf;	/* return buffer for string contents */
-	unsigned int bsize;	/* size of return buffer */
-} audevinfo_t,*paudevinfo_t;
-
-/* IO controls */
-#define IOCTL_AU_SLEN	  _IOR( 'U', 0xF0, int)         /* return the max. string descriptor length */
-#define IOCTL_AU_DEVINFO  _IOWR('U', 0xF1, audevinfo_t) /* get name of a specific device */
-#define IOCTL_AU_SERVREQ  _IOW( 'U', 0xF2, int) 	/* request a service channel */
-#define IOCTL_AU_BUFLEN	  _IOR( 'U', 0xF3, int)         /* return the max. buffer length for the device */
-#define IOCTL_AU_RXAVAIL  _IOR( 'U', 0xF4, int)         /* return != 0 if Receive Data available */
-#define IOCTL_AU_CONNECT  _IOR( 'U', 0xF5, int)         /* return != 0 if connected to a service channel */
-#define IOCTL_AU_TXREADY  _IOR( 'U', 0xF6, int)         /* return != 0 if Transmitt channel ready to send */
-/*                              'U'  0xF7..0xFF reseved */
-
-/*-------------------------------------------------------------------*/
-/* Internal data structures                                          */
-
-/* ..................................................................*/
-/* urb chain element */
-struct  auerchain;                      /* forward for circular reference */
-typedef struct
-{
-        struct auerchain *chain;        /* pointer to the chain to which this element belongs */
-        struct urb * urbp;                   /* pointer to attached urb */
-        void *context;                  /* saved URB context */
-        usb_complete_t complete;        /* saved URB completion function */
-        struct list_head list;          /* to include element into a list */
-} auerchainelement_t,*pauerchainelement_t;
-
-/* urb chain */
-typedef struct auerchain
-{
-        pauerchainelement_t active;     /* element which is submitted to urb */
-	spinlock_t lock;                /* protection agains interrupts */
-        struct list_head waiting_list;  /* list of waiting elements */
-        struct list_head free_list;     /* list of available elements */
-} auerchain_t,*pauerchain_t;
-
-/* urb blocking completion helper struct */
-typedef struct
-{
-	wait_queue_head_t wqh;    	/* wait for completion */
-	unsigned int done;		/* completion flag */
-} auerchain_chs_t,*pauerchain_chs_t;
-
-/* ...................................................................*/
-/* buffer element */
-struct  auerbufctl;                     /* forward */
-typedef struct
-{
-        char *bufp;                     /* reference to allocated data buffer */
-        unsigned int len;               /* number of characters in data buffer */
-	unsigned int retries;		/* for urb retries */
-        struct usb_ctrlrequest *dr;	/* for setup data in control messages */
-        struct urb * urbp;                   /* USB urb */
-        struct auerbufctl *list;        /* pointer to list */
-        struct list_head buff_list;     /* reference to next buffer in list */
-} auerbuf_t,*pauerbuf_t;
-
-/* buffer list control block */
-typedef struct auerbufctl
-{
-        spinlock_t lock;                /* protection in interrupt */
-        struct list_head free_buff_list;/* free buffers */
-        struct list_head rec_buff_list; /* buffers with receive data */
-} auerbufctl_t,*pauerbufctl_t;
-
-/* ...................................................................*/
-/* service context */
-struct  auerscon;                       /* forward */
-typedef void (*auer_dispatch_t)(struct auerscon*, pauerbuf_t);
-typedef void (*auer_disconn_t) (struct auerscon*);
-typedef struct auerscon
-{
-        unsigned int id;                /* protocol service id AUH_xxxx */
-        auer_dispatch_t dispatch;       /* dispatch read buffer */
-	auer_disconn_t disconnect;	/* disconnect from device, wake up all char readers */
-} auerscon_t,*pauerscon_t;
-
-/* ...................................................................*/
-/* USB device context */
-typedef struct
-{
-	struct mutex 	mutex;         	    /* protection in user context */
-	char 			name[20];	    /* name of the /dev/usb entry */
-	unsigned int		dtindex;	    /* index in the device table */
-	struct usb_device *	usbdev;      	    /* USB device handle */
-	int			open_count;	    /* count the number of open character channels */
-        char 			dev_desc[AUSI_DLEN];/* for storing a textual description */
-        unsigned int 		maxControlLength;   /* max. Length of control paket (without header) */
-        struct urb * 		inturbp;            /* interrupt urb */
-        char *			intbufp;            /* data buffer for interrupt urb */
-	unsigned int 		irqsize;	    /* size of interrupt endpoint 1 */
-        struct auerchain 	controlchain;  	    /* for chaining of control messages */
-	auerbufctl_t 		bufctl;             /* Buffer control for control transfers */
-        pauerscon_t 	     	services[AUH_TYPESIZE];/* context pointers for each service */
-	unsigned int		version;	    /* Version of the device */
-	wait_queue_head_t 	bufferwait;         /* wait for a control buffer */
-} auerswald_t,*pauerswald_t;
-
-/* ................................................................... */
-/* character device context */
-typedef struct
-{
-	struct mutex mutex;		/* protection in user context */
-	pauerswald_t auerdev;           /* context pointer of assigned device */
-        auerbufctl_t bufctl;            /* controls the buffer chain */
-        auerscon_t scontext;            /* service context */
-	wait_queue_head_t readwait;     /* for synchronous reading */
-	struct mutex readmutex;		/* protection against multiple reads */
-	pauerbuf_t readbuf;		/* buffer held for partial reading */
-	unsigned int readoffset;	/* current offset in readbuf */
-	unsigned int removed;		/* is != 0 if device is removed */
-} auerchar_t,*pauerchar_t;
-
-
-/*-------------------------------------------------------------------*/
-/* Forwards */
-static void auerswald_ctrlread_complete (struct urb * urb);
-static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp);
-static struct usb_driver auerswald_driver;
-
-
-/*-------------------------------------------------------------------*/
-/* USB chain helper functions                                        */
-/* --------------------------                                        */
-
-/* completion function for chained urbs */
-static void auerchain_complete (struct urb * urb)
-{
-	unsigned long flags;
-        int result;
-
-        /* get pointer to element and to chain */
-	pauerchainelement_t acep = urb->context;
-        pauerchain_t         acp = acep->chain;
-
-        /* restore original entries in urb */
-        urb->context  = acep->context;
-        urb->complete = acep->complete;
-
-        dbg ("auerchain_complete called");
-
-        /* call original completion function
-           NOTE: this function may lead to more urbs submitted into the chain.
-                 (no chain lock at calling complete()!)
-                 acp->active != NULL is protecting us against recursion.*/
-        urb->complete (urb);
-
-        /* detach element from chain data structure */
-	spin_lock_irqsave (&acp->lock, flags);
-        if (acp->active != acep) /* paranoia debug check */
-	        dbg ("auerchain_complete: completion on non-active element called!");
-        else
-                acp->active = NULL;
-
-        /* add the used chain element to the list of free elements */
-	list_add_tail (&acep->list, &acp->free_list);
-        acep = NULL;
-
-        /* is there a new element waiting in the chain? */
-        if (!acp->active && !list_empty (&acp->waiting_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = acp->waiting_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-                acp->active = acep;
-        }
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* submit the new urb */
-        if (acep) {
-                urb    = acep->urbp;
-                dbg ("auerchain_complete: submitting next urb from chain");
-		urb->status = 0;	/* needed! */
-		result = usb_submit_urb(urb, GFP_ATOMIC);
-
-                /* check for submit errors */
-                if (result) {
-                        urb->status = result;
-                        dbg("auerchain_complete: usb_submit_urb with error code %d", result);
-                        /* and do error handling via *this* completion function (recursive) */
-                        auerchain_complete( urb);
-                }
-        } else {
-                /* simple return without submitting a new urb.
-                   The empty chain is detected with acp->active == NULL. */
-        };
-}
-
-
-/* submit function for chained urbs
-   this function may be called from completion context or from user space!
-   early = 1 -> submit in front of chain
-*/
-static int auerchain_submit_urb_list (pauerchain_t acp, struct urb * urb, int early)
-{
-        int result;
-        unsigned long flags;
-        pauerchainelement_t acep = NULL;
-
-        dbg ("auerchain_submit_urb called");
-
-        /* try to get a chain element */
-        spin_lock_irqsave (&acp->lock, flags);
-        if (!list_empty (&acp->free_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = acp->free_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-        }
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* if no chain element available: return with error */
-        if (!acep) {
-                return -ENOMEM;
-        }
-
-        /* fill in the new chain element values */
-        acep->chain    = acp;
-        acep->context  = urb->context;
-        acep->complete = urb->complete;
-        acep->urbp     = urb;
-        INIT_LIST_HEAD (&acep->list);
-
-        /* modify urb */
-        urb->context   = acep;
-        urb->complete  = auerchain_complete;
-        urb->status    = -EINPROGRESS;    /* usb_submit_urb does this, too */
-
-        /* add element to chain - or start it immediately */
-        spin_lock_irqsave (&acp->lock, flags);
-        if (acp->active) {
-                /* there is traffic in the chain, simple add element to chain */
-		if (early) {
-			dbg ("adding new urb to head of chain");
-			list_add (&acep->list, &acp->waiting_list);
-		} else {
-			dbg ("adding new urb to end of chain");
-			list_add_tail (&acep->list, &acp->waiting_list);
-		}
-		acep = NULL;
-        } else {
-                /* the chain is empty. Prepare restart */
-                acp->active = acep;
-        }
-        /* Spin has to be removed before usb_submit_urb! */
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* Submit urb if immediate restart */
-        if (acep) {
-                dbg("submitting urb immediate");
-		urb->status = 0;	/* needed! */
-                result = usb_submit_urb(urb, GFP_ATOMIC);
-                /* check for submit errors */
-                if (result) {
-                        urb->status = result;
-                        dbg("auerchain_submit_urb: usb_submit_urb with error code %d", result);
-                        /* and do error handling via completion function */
-                        auerchain_complete( urb);
-                }
-        }
-
-        return 0;
-}
-
-/* submit function for chained urbs
-   this function may be called from completion context or from user space!
-*/
-static int auerchain_submit_urb (pauerchain_t acp, struct urb * urb)
-{
-	return auerchain_submit_urb_list (acp, urb, 0);
-}
-
-/* cancel an urb which is submitted to the chain
-   the result is 0 if the urb is cancelled, or -EINPROGRESS if
-   the function is successfully started.
-*/
-static int auerchain_unlink_urb (pauerchain_t acp, struct urb * urb)
-{
-	unsigned long flags;
-        struct urb * urbp;
-        pauerchainelement_t acep;
-        struct list_head *tmp;
-
-        dbg ("auerchain_unlink_urb called");
-
-        /* search the chain of waiting elements */
-        spin_lock_irqsave (&acp->lock, flags);
-        list_for_each (tmp, &acp->waiting_list) {
-                acep = list_entry (tmp, auerchainelement_t, list);
-                if (acep->urbp == urb) {
-                        list_del (tmp);
-                        urb->context = acep->context;
-                        urb->complete = acep->complete;
-                        list_add_tail (&acep->list, &acp->free_list);
-                        spin_unlock_irqrestore (&acp->lock, flags);
-                        dbg ("unlink waiting urb");
-                        urb->status = -ENOENT;
-                        urb->complete (urb);
-                        return 0;
-                }
-        }
-        /* not found. */
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* get the active urb */
-        acep = acp->active;
-        if (acep) {
-                urbp = acep->urbp;
-
-                /* check if we have to cancel the active urb */
-                if (urbp == urb) {
-                        /* note that there is a race condition between the check above
-                           and the unlink() call because of no lock. This race is harmless,
-                           because the usb module will detect the unlink() after completion.
-                           We can't use the acp->lock here because the completion function
-                           wants to grab it.
-			*/
-                        dbg ("unlink active urb");
-                        return usb_unlink_urb (urbp);
-                }
-        }
-
-        /* not found anyway
-           ... is some kind of success
-	*/
-        dbg ("urb to unlink not found in chain");
-        return 0;
-}
-
-/* cancel all urbs which are in the chain.
-   this function must not be called from interrupt or completion handler.
-*/
-static void auerchain_unlink_all (pauerchain_t acp)
-{
-	unsigned long flags;
-        struct urb * urbp;
-        pauerchainelement_t acep;
-
-        dbg ("auerchain_unlink_all called");
-
-        /* clear the chain of waiting elements */
-        spin_lock_irqsave (&acp->lock, flags);
-        while (!list_empty (&acp->waiting_list)) {
-                /* get the next entry */
-                struct list_head *tmp = acp->waiting_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-                urbp = acep->urbp;
-                urbp->context = acep->context;
-                urbp->complete = acep->complete;
-                list_add_tail (&acep->list, &acp->free_list);
-                spin_unlock_irqrestore (&acp->lock, flags);
-                dbg ("unlink waiting urb");
-                urbp->status = -ENOENT;
-                urbp->complete (urbp);
-                spin_lock_irqsave (&acp->lock, flags);
-        }
-        spin_unlock_irqrestore (&acp->lock, flags);
-
-        /* clear the active urb */
-        acep = acp->active;
-        if (acep) {
-                urbp = acep->urbp;
-                dbg ("unlink active urb");
-                usb_kill_urb (urbp);
-        }
-}
-
-
-/* free the chain.
-   this function must not be called from interrupt or completion handler.
-*/
-static void auerchain_free (pauerchain_t acp)
-{
-	unsigned long flags;
-        pauerchainelement_t acep;
-
-        dbg ("auerchain_free called");
-
-        /* first, cancel all pending urbs */
-        auerchain_unlink_all (acp);
-
-        /* free the elements */
-        spin_lock_irqsave (&acp->lock, flags);
-        while (!list_empty (&acp->free_list)) {
-                /* get the next entry */
-                struct list_head *tmp = acp->free_list.next;
-                list_del (tmp);
-                spin_unlock_irqrestore (&acp->lock, flags);
-		acep = list_entry (tmp, auerchainelement_t, list);
-                kfree (acep);
-	        spin_lock_irqsave (&acp->lock, flags);
-	}
-        spin_unlock_irqrestore (&acp->lock, flags);
-}
-
-
-/* Init the chain control structure */
-static void auerchain_init (pauerchain_t acp)
-{
-        /* init the chain data structure */
-        acp->active = NULL;
-	spin_lock_init (&acp->lock);
-        INIT_LIST_HEAD (&acp->waiting_list);
-        INIT_LIST_HEAD (&acp->free_list);
-}
-
-/* setup a chain.
-   It is assumed that there is no concurrency while setting up the chain
-   requirement: auerchain_init()
-*/
-static int auerchain_setup (pauerchain_t acp, unsigned int numElements)
-{
-        pauerchainelement_t acep;
-
-        dbg ("auerchain_setup called with %d elements", numElements);
-
-        /* fill the list of free elements */
-        for (;numElements; numElements--) {
-                acep = kzalloc(sizeof(auerchainelement_t), GFP_KERNEL);
-                if (!acep)
-			goto ac_fail;
-                INIT_LIST_HEAD (&acep->list);
-                list_add_tail (&acep->list, &acp->free_list);
-        }
-        return 0;
-
-ac_fail:/* free the elements */
-        while (!list_empty (&acp->free_list)) {
-                /* get the next entry */
-                struct list_head *tmp = acp->free_list.next;
-                list_del (tmp);
-                acep = list_entry (tmp, auerchainelement_t, list);
-                kfree (acep);
-        }
-        return -ENOMEM;
-}
-
-
-/* completion handler for synchronous chained URBs */
-static void auerchain_blocking_completion (struct urb *urb)
-{
-	pauerchain_chs_t pchs = urb->context;
-	pchs->done = 1;
-	wmb();
-	wake_up (&pchs->wqh);
-}
-
-
-/* Starts chained urb and waits for completion or timeout */
-static int auerchain_start_wait_urb (pauerchain_t acp, struct urb *urb, int timeout, int* actual_length)
-{
-	auerchain_chs_t chs;
-	int status;
-
-	dbg ("auerchain_start_wait_urb called");
-	init_waitqueue_head (&chs.wqh);
-	chs.done = 0;
-
-	urb->context = &chs;
-	status = auerchain_submit_urb (acp, urb);
-	if (status)
-		/* something went wrong */
-		return status;
-
-	timeout = wait_event_timeout(chs.wqh, chs.done, timeout);
-
-	if (!timeout && !chs.done) {
-		if (urb->status != -EINPROGRESS) {	/* No callback?!! */
-			dbg ("auerchain_start_wait_urb: raced timeout");
-			status = urb->status;
-		} else {
-			dbg ("auerchain_start_wait_urb: timeout");
-			auerchain_unlink_urb (acp, urb);  /* remove urb safely */
-			status = -ETIMEDOUT;
-		}
-	} else
-		status = urb->status;
-
-	if (status >= 0)
-		*actual_length = urb->actual_length;
-
-  	return status;
-}
-
-
-/* auerchain_control_msg - Builds a control urb, sends it off and waits for completion
-   acp: pointer to the auerchain
-   dev: pointer to the usb device to send the message to
-   pipe: endpoint "pipe" to send the message to
-   request: USB message request value
-   requesttype: USB message request type value
-   value: USB message value
-   index: USB message index value
-   data: pointer to the data to send
-   size: length in bytes of the data to send
-   timeout: time to wait for the message to complete before timing out (if 0 the wait is forever)
-
-   This function sends a simple control message to a specified endpoint
-   and waits for the message to complete, or timeout.
-
-   If successful, it returns the transferred length, otherwise a negative error number.
-
-   Don't use this function from within an interrupt context, like a
-   bottom half handler.  If you need an asynchronous message, or need to send
-   a message from within interrupt context, use auerchain_submit_urb()
-*/
-static int auerchain_control_msg (pauerchain_t acp, struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype,
-			          __u16 value, __u16 index, void *data, __u16 size, int timeout)
-{
-	int ret;
-	struct usb_ctrlrequest *dr;
-	struct urb *urb;
-        int uninitialized_var(length);
-
-        dbg ("auerchain_control_msg");
-        dr = kmalloc (sizeof (struct usb_ctrlrequest), GFP_KERNEL);
-	if (!dr)
-		return -ENOMEM;
-	urb = usb_alloc_urb (0, GFP_KERNEL);
-	if (!urb) {
-        	kfree (dr);
-		return -ENOMEM;
-        }
-
-	dr->bRequestType = requesttype;
-	dr->bRequest = request;
-	dr->wValue  = cpu_to_le16 (value);
-	dr->wIndex  = cpu_to_le16 (index);
-	dr->wLength = cpu_to_le16 (size);
-
-	usb_fill_control_urb (urb, dev, pipe, (unsigned char*)dr, data, size,    /* build urb */
-		          auerchain_blocking_completion, NULL);
-	ret = auerchain_start_wait_urb (acp, urb, timeout, &length);
-
-	usb_free_urb (urb);
-	kfree (dr);
-
-        if (ret < 0)
-		return ret;
-	else
-		return length;
-}
-
-
-/*-------------------------------------------------------------------*/
-/* Buffer List helper functions                                      */
-
-/* free a single auerbuf */
-static void auerbuf_free (pauerbuf_t bp)
-{
-	kfree(bp->bufp);
-	kfree(bp->dr);
-	usb_free_urb(bp->urbp);
-	kfree(bp);
-}
-
-/* free the buffers from an auerbuf list */
-static void auerbuf_free_list (struct list_head *q)
-{
-        struct list_head *tmp;
-	struct list_head *p;
-	pauerbuf_t bp;
-
-	dbg ("auerbuf_free_list");
-	for (p = q->next; p != q;) {
-		bp = list_entry (p, auerbuf_t, buff_list);
-		tmp = p->next;
-		list_del (p);
-		p = tmp;
-		auerbuf_free (bp);
-	}
-}
-
-/* init the members of a list control block */
-static void auerbuf_init (pauerbufctl_t bcp)
-{
-	dbg ("auerbuf_init");
-	spin_lock_init (&bcp->lock);
-        INIT_LIST_HEAD (&bcp->free_buff_list);
-        INIT_LIST_HEAD (&bcp->rec_buff_list);
-}
-
-/* free all buffers from an auerbuf chain */
-static void auerbuf_free_buffers (pauerbufctl_t bcp)
-{
-	unsigned long flags;
-	dbg ("auerbuf_free_buffers");
-
-        spin_lock_irqsave (&bcp->lock, flags);
-
-	auerbuf_free_list (&bcp->free_buff_list);
-	auerbuf_free_list (&bcp->rec_buff_list);
-
-        spin_unlock_irqrestore (&bcp->lock, flags);
-}
-
-/* setup a list of buffers */
-/* requirement: auerbuf_init() */
-static int auerbuf_setup (pauerbufctl_t bcp, unsigned int numElements, unsigned int bufsize)
-{
-        pauerbuf_t bep = NULL;
-
-        dbg ("auerbuf_setup called with %d elements of %d bytes", numElements, bufsize);
-
-        /* fill the list of free elements */
-        for (;numElements; numElements--) {
-                bep = kzalloc(sizeof(auerbuf_t), GFP_KERNEL);
-                if (!bep)
-			goto bl_fail;
-                bep->list = bcp;
-                INIT_LIST_HEAD (&bep->buff_list);
-                bep->bufp = kmalloc (bufsize, GFP_KERNEL);
-                if (!bep->bufp)
-			goto bl_fail;
-                bep->dr = kmalloc(sizeof (struct usb_ctrlrequest), GFP_KERNEL);
-                if (!bep->dr)
-			goto bl_fail;
-                bep->urbp = usb_alloc_urb (0, GFP_KERNEL);
-                if (!bep->urbp)
-			goto bl_fail;
-                list_add_tail (&bep->buff_list, &bcp->free_buff_list);
-        }
-        return 0;
-
-bl_fail:/* not enough memory. Free allocated elements */
-        dbg ("auerbuf_setup: no more memory");
-	auerbuf_free(bep);
-        auerbuf_free_buffers (bcp);
-        return -ENOMEM;
-}
-
-/* insert a used buffer into the free list */
-static void auerbuf_releasebuf( pauerbuf_t bp)
-{
-        unsigned long flags;
-        pauerbufctl_t bcp = bp->list;
-	bp->retries = 0;
-
-        dbg ("auerbuf_releasebuf called");
-        spin_lock_irqsave (&bcp->lock, flags);
-	list_add_tail (&bp->buff_list, &bcp->free_buff_list);
-        spin_unlock_irqrestore (&bcp->lock, flags);
-}
-
-
-/*-------------------------------------------------------------------*/
-/* Completion handlers */
-
-/* Values of urb->status or results of usb_submit_urb():
-0		Initial, OK
--EINPROGRESS	during submission until end
--ENOENT		if urb is unlinked
--ETIME		Device did not respond
--ENOMEM		Memory Overflow
--ENODEV		Specified USB-device or bus doesn't exist
--ENXIO		URB already queued
--EINVAL		a) Invalid transfer type specified (or not supported)
-		b) Invalid interrupt interval (0n256)
--EAGAIN		a) Specified ISO start frame too early
-		b) (using ISO-ASAP) Too much scheduled for the future wait some time and try again.
--EFBIG		Too much ISO frames requested (currently uhci900)
--EPIPE		Specified pipe-handle/Endpoint is already stalled
--EMSGSIZE	Endpoint message size is zero, do interface/alternate setting
--EPROTO		a) Bitstuff error
-		b) Unknown USB error
--EILSEQ		CRC mismatch
--ENOSR		Buffer error
--EREMOTEIO	Short packet detected
--EXDEV		ISO transfer only partially completed look at individual frame status for details
--EINVAL		ISO madness, if this happens: Log off and go home
--EOVERFLOW	babble
-*/
-
-/* check if a status code allows a retry */
-static int auerswald_status_retry (int status)
-{
-	switch (status) {
-	case 0:
-	case -ETIME:
-	case -EOVERFLOW:
-	case -EAGAIN:
-	case -EPIPE:
-	case -EPROTO:
-	case -EILSEQ:
-	case -ENOSR:
-	case -EREMOTEIO:
-		return 1; /* do a retry */
-	}
-	return 0;	/* no retry possible */
-}
-
-/* Completion of asynchronous write block */
-static void auerchar_ctrlwrite_complete (struct urb * urb)
-{
-	pauerbuf_t bp =  urb->context;
-	pauerswald_t cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl)));
-	dbg ("auerchar_ctrlwrite_complete called");
-
-	/* reuse the buffer */
-	auerbuf_releasebuf (bp);
-	/* Wake up all processes waiting for a buffer */
-	wake_up (&cp->bufferwait);
-}
-
-/* Completion handler for dummy retry packet */
-static void auerswald_ctrlread_wretcomplete (struct urb * urb)
-{
-	pauerbuf_t bp = urb->context;
-        pauerswald_t cp;
-	int ret;
-	int status = urb->status;
-
-        dbg ("auerswald_ctrlread_wretcomplete called");
-        dbg ("complete with status: %d", status);
-	cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl)));
-
-	/* check if it is possible to advance */
-	if (!auerswald_status_retry(status) || !cp->usbdev) {
-		/* reuse the buffer */
-		err ("control dummy: transmission error %d, can not retry", status);
-		auerbuf_releasebuf (bp);
-		/* Wake up all processes waiting for a buffer */
-		wake_up (&cp->bufferwait);
-		return;
-	}
-
-	/* fill the control message */
-	bp->dr->bRequestType = AUT_RREQ;
-	bp->dr->bRequest     = AUV_RBLOCK;
-	bp->dr->wLength      = bp->dr->wValue;	/* temporary stored */
-	bp->dr->wValue       = cpu_to_le16 (1);	/* Retry Flag */
-	/* bp->dr->index    = channel id;          remains */
-	usb_fill_control_urb (bp->urbp, cp->usbdev, usb_rcvctrlpipe (cp->usbdev, 0),
-                          (unsigned char*)bp->dr, bp->bufp, le16_to_cpu (bp->dr->wLength),
-		          auerswald_ctrlread_complete,bp);
-
-	/* submit the control msg as next paket */
-	ret = auerchain_submit_urb_list (&cp->controlchain, bp->urbp, 1);
-        if (ret) {
-        	dbg ("auerswald_ctrlread_complete: nonzero result of auerchain_submit_urb_list %d", ret);
-        	bp->urbp->status = ret;
-        	auerswald_ctrlread_complete (bp->urbp);
-    	}
-}
-
-/* completion handler for receiving of control messages */
-static void auerswald_ctrlread_complete (struct urb * urb)
-{
-        unsigned int  serviceid;
-        pauerswald_t  cp;
-        pauerscon_t   scp;
-	pauerbuf_t bp = urb->context;
-	int status = urb->status;
-	int ret;
-
-        dbg ("auerswald_ctrlread_complete called");
-
-	cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl)));
-
-	/* check if there is valid data in this urb */
-        if (status) {
-		dbg ("complete with non-zero status: %d", status);
-		/* should we do a retry? */
-		if (!auerswald_status_retry(status)
-		 || !cp->usbdev
-		 || (cp->version < AUV_RETRY)
-                 || (bp->retries >= AU_RETRIES)) {
-			/* reuse the buffer */
-			err ("control read: transmission error %d, can not retry", status);
-			auerbuf_releasebuf (bp);
-			/* Wake up all processes waiting for a buffer */
-			wake_up (&cp->bufferwait);
-			return;
-		}
-		bp->retries++;
-		dbg ("Retry count = %d", bp->retries);
-		/* send a long dummy control-write-message to allow device firmware to react */
-		bp->dr->bRequestType = AUT_WREQ;
-		bp->dr->bRequest     = AUV_DUMMY;
-		bp->dr->wValue       = bp->dr->wLength; /* temporary storage */
-		// bp->dr->wIndex    channel ID remains
-		bp->dr->wLength      = cpu_to_le16 (32); /* >= 8 bytes */
-		usb_fill_control_urb (bp->urbp, cp->usbdev, usb_sndctrlpipe (cp->usbdev, 0),
-  			(unsigned char*)bp->dr, bp->bufp, 32,
-	   		auerswald_ctrlread_wretcomplete,bp);
-
-		/* submit the control msg as next paket */
-       		ret = auerchain_submit_urb_list (&cp->controlchain, bp->urbp, 1);
-       		if (ret) {
-               		dbg ("auerswald_ctrlread_complete: nonzero result of auerchain_submit_urb_list %d", ret);
-               		bp->urbp->status = ret;
-               		auerswald_ctrlread_wretcomplete (bp->urbp);
-		}
-                return;
-        }
-
-        /* get the actual bytecount (incl. headerbyte) */
-        bp->len = urb->actual_length;
-        serviceid = bp->bufp[0] & AUH_TYPEMASK;
-        dbg ("Paket with serviceid %d and %d bytes received", serviceid, bp->len);
-
-        /* dispatch the paket */
-        scp = cp->services[serviceid];
-        if (scp) {
-                /* look, Ma, a listener! */
-                scp->dispatch (scp, bp);
-        }
-
-        /* release the paket */
-        auerbuf_releasebuf (bp);
-	/* Wake up all processes waiting for a buffer */
-	wake_up (&cp->bufferwait);
-}
-
-/*-------------------------------------------------------------------*/
-/* Handling of Interrupt Endpoint                                    */
-/* This interrupt Endpoint is used to inform the host about waiting
-   messages from the USB device.
-*/
-/* int completion handler. */
-static void auerswald_int_complete (struct urb * urb)
-{
-        unsigned long flags;
-        unsigned  int channelid;
-        unsigned  int bytecount;
-        int ret;
-	int status = urb->status;
-        pauerbuf_t   bp = NULL;
-	pauerswald_t cp = urb->context;
-
-        dbg ("%s called", __func__);
-
-	switch (status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__, status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __func__, status);
-		goto exit;
-	}
-
-        /* check if all needed data was received */
-	if (urb->actual_length < AU_IRQMINSIZE) {
-                dbg ("invalid data length received: %d bytes", urb->actual_length);
-		goto exit;
-        }
-
-        /* check the command code */
-        if (cp->intbufp[0] != AU_IRQCMDID) {
-                dbg ("invalid command received: %d", cp->intbufp[0]);
-		goto exit;
-        }
-
-        /* check the command type */
-        if (cp->intbufp[1] != AU_BLOCKRDY) {
-                dbg ("invalid command type received: %d", cp->intbufp[1]);
-		goto exit;
-        }
-
-        /* now extract the information */
-        channelid = cp->intbufp[2];
-        bytecount = (unsigned char)cp->intbufp[3];
-        bytecount |= (unsigned char)cp->intbufp[4] << 8;
-
-        /* check the channel id */
-        if (channelid >= AUH_TYPESIZE) {
-                dbg ("invalid channel id received: %d", channelid);
-		goto exit;
-        }
-
-        /* check the byte count */
-        if (bytecount > (cp->maxControlLength+AUH_SIZE)) {
-                dbg ("invalid byte count received: %d", bytecount);
-		goto exit;
-        }
-        dbg ("Service Channel = %d", channelid);
-        dbg ("Byte Count = %d", bytecount);
-
-        /* get a buffer for the next data paket */
-        spin_lock_irqsave (&cp->bufctl.lock, flags);
-        if (!list_empty (&cp->bufctl.free_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = cp->bufctl.free_buff_list.next;
-                list_del (tmp);
-                bp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&cp->bufctl.lock, flags);
-
-        /* if no buffer available: skip it */
-        if (!bp) {
-                dbg ("auerswald_int_complete: no data buffer available");
-                /* can we do something more?
-		   This is a big problem: if this int packet is ignored, the
-		   device will wait forever and not signal any more data.
-		   The only real solution is: having enough buffers!
-		   Or perhaps temporary disabling the int endpoint?
-		*/
-		goto exit;
-        }
-
-	/* fill the control message */
-        bp->dr->bRequestType = AUT_RREQ;
-	bp->dr->bRequest     = AUV_RBLOCK;
-	bp->dr->wValue       = cpu_to_le16 (0);
-	bp->dr->wIndex       = cpu_to_le16 (channelid | AUH_DIRECT | AUH_UNSPLIT);
-	bp->dr->wLength      = cpu_to_le16 (bytecount);
-	usb_fill_control_urb (bp->urbp, cp->usbdev, usb_rcvctrlpipe (cp->usbdev, 0),
-                          (unsigned char*)bp->dr, bp->bufp, bytecount,
-		          auerswald_ctrlread_complete,bp);
-
-        /* submit the control msg */
-        ret = auerchain_submit_urb (&cp->controlchain, bp->urbp);
-        if (ret) {
-                dbg ("auerswald_int_complete: nonzero result of auerchain_submit_urb %d", ret);
-                bp->urbp->status = ret;
-                auerswald_ctrlread_complete( bp->urbp);
-		/* here applies the same problem as above: device locking! */
-        }
-exit:
-	ret = usb_submit_urb (urb, GFP_ATOMIC);
-	if (ret)
-		err ("%s - usb_submit_urb failed with result %d",
-		     __func__, ret);
-}
-
-/* int memory deallocation
-   NOTE: no mutex please!
-*/
-static void auerswald_int_free (pauerswald_t cp)
-{
-	if (cp->inturbp) {
-		usb_free_urb(cp->inturbp);
-		cp->inturbp = NULL;
-	}
-	kfree(cp->intbufp);
-	cp->intbufp = NULL;
-}
-
-/* This function is called to activate the interrupt
-   endpoint. This function returns 0 if successful or an error code.
-   NOTE: no mutex please!
-*/
-static int auerswald_int_open (pauerswald_t cp)
-{
-        int ret;
-	struct usb_host_endpoint *ep;
-	int irqsize;
-	dbg ("auerswald_int_open");
-
-	ep = cp->usbdev->ep_in[AU_IRQENDP];
-	if (!ep) {
-		ret = -EFAULT;
-  		goto intoend;
-    	}
-	irqsize = le16_to_cpu(ep->desc.wMaxPacketSize);
-	cp->irqsize = irqsize;
-
-	/* allocate the urb and data buffer */
-        if (!cp->inturbp) {
-                cp->inturbp = usb_alloc_urb (0, GFP_KERNEL);
-                if (!cp->inturbp) {
-                        ret = -ENOMEM;
-                        goto intoend;
-                }
-        }
-        if (!cp->intbufp) {
-                cp->intbufp = kmalloc (irqsize, GFP_KERNEL);
-                if (!cp->intbufp) {
-                        ret = -ENOMEM;
-                        goto intoend;
-                }
-        }
-        /* setup urb */
-        usb_fill_int_urb (cp->inturbp, cp->usbdev,
-			usb_rcvintpipe (cp->usbdev,AU_IRQENDP), cp->intbufp,
-			irqsize, auerswald_int_complete, cp, ep->desc.bInterval);
-        /* start the urb */
-	cp->inturbp->status = 0;	/* needed! */
-	ret = usb_submit_urb (cp->inturbp, GFP_KERNEL);
-
-intoend:
-        if (ret < 0) {
-                /* activation of interrupt endpoint has failed. Now clean up. */
-                dbg ("auerswald_int_open: activation of int endpoint failed");
-
-                /* deallocate memory */
-                auerswald_int_free (cp);
-        }
-        return ret;
-}
-
-/* This function is called to deactivate the interrupt
-   endpoint. This function returns 0 if successful or an error code.
-   NOTE: no mutex please!
-*/
-static void auerswald_int_release (pauerswald_t cp)
-{
-        dbg ("auerswald_int_release");
-
-        /* stop the int endpoint */
-	usb_kill_urb (cp->inturbp);
-
-        /* deallocate memory */
-        auerswald_int_free (cp);
-}
-
-/* --------------------------------------------------------------------- */
-/* Helper functions                                                      */
-
-/* wake up waiting readers */
-static void auerchar_disconnect (pauerscon_t scp)
-{
-        pauerchar_t ccp = ((pauerchar_t)((char *)(scp)-(unsigned long)(&((pauerchar_t)0)->scontext)));
-	dbg ("auerchar_disconnect called");
-	ccp->removed = 1;
-	wake_up (&ccp->readwait);
-}
-
-
-/* dispatch a read paket to a waiting character device */
-static void auerchar_ctrlread_dispatch (pauerscon_t scp, pauerbuf_t bp)
-{
-	unsigned long flags;
-        pauerchar_t ccp;
-        pauerbuf_t newbp = NULL;
-        char * charp;
-        dbg ("auerchar_ctrlread_dispatch called");
-        ccp = ((pauerchar_t)((char *)(scp)-(unsigned long)(&((pauerchar_t)0)->scontext)));
-
-        /* get a read buffer from character device context */
-        spin_lock_irqsave (&ccp->bufctl.lock, flags);
-        if (!list_empty (&ccp->bufctl.free_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = ccp->bufctl.free_buff_list.next;
-                list_del (tmp);
-                newbp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&ccp->bufctl.lock, flags);
-
-        if (!newbp) {
-                dbg ("No read buffer available, discard paket!");
-                return;     /* no buffer, no dispatch */
-        }
-
-        /* copy information to new buffer element
-           (all buffers have the same length) */
-        charp = newbp->bufp;
-        newbp->bufp = bp->bufp;
-        bp->bufp = charp;
-        newbp->len = bp->len;
-
-        /* insert new buffer in read list */
-        spin_lock_irqsave (&ccp->bufctl.lock, flags);
-	list_add_tail (&newbp->buff_list, &ccp->bufctl.rec_buff_list);
-        spin_unlock_irqrestore (&ccp->bufctl.lock, flags);
-        dbg ("read buffer appended to rec_list");
-
-        /* wake up pending synchronous reads */
-	wake_up (&ccp->readwait);
-}
-
-
-/* Delete an auerswald driver context */
-static void auerswald_delete( pauerswald_t cp)
-{
-	dbg( "auerswald_delete");
-	if (cp == NULL)
-		return;
-
-	/* Wake up all processes waiting for a buffer */
-	wake_up (&cp->bufferwait);
-
-	/* Cleaning up */
-	auerswald_int_release (cp);
-	auerchain_free (&cp->controlchain);
-	auerbuf_free_buffers (&cp->bufctl);
-
-	/* release the memory */
-	kfree( cp);
-}
-
-
-/* Delete an auerswald character context */
-static void auerchar_delete( pauerchar_t ccp)
-{
-	dbg ("auerchar_delete");
-	if (ccp == NULL)
-		return;
-
-        /* wake up pending synchronous reads */
-	ccp->removed = 1;
-	wake_up (&ccp->readwait);
-
-	/* remove the read buffer */
-	if (ccp->readbuf) {
-		auerbuf_releasebuf (ccp->readbuf);
-		ccp->readbuf = NULL;
-	}
-
-	/* remove the character buffers */
-	auerbuf_free_buffers (&ccp->bufctl);
-
-	/* release the memory */
-	kfree( ccp);
-}
-
-
-/* add a new service to the device
-   scp->id must be set!
-   return: 0 if OK, else error code
-*/
-static int auerswald_addservice (pauerswald_t cp, pauerscon_t scp)
-{
-	int ret;
-
-	/* is the device available? */
-	if (!cp->usbdev) {
-		dbg ("usbdev == NULL");
-		return -EIO;	/*no: can not add a service, sorry*/
-	}
-
-	/* is the service available? */
-	if (cp->services[scp->id]) {
-		dbg ("service is busy");
-                return -EBUSY;
-	}
-
-	/* device is available, service is free */
-	cp->services[scp->id] = scp;
-
-	/* register service in device */
-	ret = auerchain_control_msg(
-		&cp->controlchain,                      /* pointer to control chain */
-		cp->usbdev,                             /* pointer to device */
-		usb_sndctrlpipe (cp->usbdev, 0),        /* pipe to control endpoint */
-		AUV_CHANNELCTL,                         /* USB message request value */
-		AUT_WREQ,                               /* USB message request type value */
-		0x01,              /* open                 USB message value */
-		scp->id,            		        /* USB message index value */
-		NULL,                                   /* pointer to the data to send */
-		0,                                      /* length in bytes of the data to send */
-		HZ * 2);                                /* time to wait for the message to complete before timing out */
-	if (ret < 0) {
-		dbg ("auerswald_addservice: auerchain_control_msg returned error code %d", ret);
-		/* undo above actions */
-		cp->services[scp->id] = NULL;
-		return ret;
-	}
-
-	dbg ("auerswald_addservice: channel open OK");
-	return 0;
-}
-
-
-/* remove a service from the device
-   scp->id must be set! */
-static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp)
-{
-	dbg ("auerswald_removeservice called");
-
-	/* check if we have a service allocated */
-	if (scp->id == AUH_UNASSIGNED)
-		return;
-
-	/* If there is a device: close the channel */
-	if (cp->usbdev) {
-		/* Close the service channel inside the device */
-		int ret = auerchain_control_msg(
-		&cp->controlchain,            		/* pointer to control chain */
-		cp->usbdev,         		        /* pointer to device */
-		usb_sndctrlpipe (cp->usbdev, 0),	/* pipe to control endpoint */
-		AUV_CHANNELCTL,                         /* USB message request value */
-		AUT_WREQ,                               /* USB message request type value */
-		0x00,              // close             /* USB message value */
-		scp->id,            		        /* USB message index value */
-		NULL,                                   /* pointer to the data to send */
-		0,                                      /* length in bytes of the data to send */
-		HZ * 2);                                /* time to wait for the message to complete before timing out */
-		if (ret < 0) {
-			dbg ("auerswald_removeservice: auerchain_control_msg returned error code %d", ret);
-		}
-		else {
-			dbg ("auerswald_removeservice: channel close OK");
-		}
-	}
-
-	/* remove the service from the device */
-	cp->services[scp->id] = NULL;
-	scp->id = AUH_UNASSIGNED;
-}
-
-
-/* --------------------------------------------------------------------- */
-/* Char device functions                                                 */
-
-/* Open a new character device */
-static int auerchar_open (struct inode *inode, struct file *file)
-{
-	int dtindex = iminor(inode);
-	pauerswald_t cp = NULL;
-	pauerchar_t ccp = NULL;
-	struct usb_interface *intf;
-        int ret;
-
-        /* minor number in range? */
-	if (dtindex < 0) {
-		return -ENODEV;
-        }
-	intf = usb_find_interface(&auerswald_driver, dtindex);
-	if (!intf) {
-		return -ENODEV;
-	}
-
-	/* usb device available? */
-	cp = usb_get_intfdata (intf);
-	if (cp == NULL) {
-		return -ENODEV;
-	}
-	if (mutex_lock_interruptible(&cp->mutex)) {
-		return -ERESTARTSYS;
-	}
-
-	/* we have access to the device. Now lets allocate memory */
-	ccp = kzalloc(sizeof(auerchar_t), GFP_KERNEL);
-	if (ccp == NULL) {
-		err ("out of memory");
-		ret = -ENOMEM;
-		goto ofail;
-	}
-
-	/* Initialize device descriptor */
-	mutex_init(&ccp->mutex);
-	mutex_init(&ccp->readmutex);
-        auerbuf_init (&ccp->bufctl);
-        ccp->scontext.id = AUH_UNASSIGNED;
-        ccp->scontext.dispatch = auerchar_ctrlread_dispatch;
-	ccp->scontext.disconnect = auerchar_disconnect;
-	init_waitqueue_head (&ccp->readwait);
-
-	ret = auerbuf_setup (&ccp->bufctl, AU_RBUFFERS, cp->maxControlLength+AUH_SIZE);
-       	if (ret) {
-		goto ofail;
-	}
-
-	cp->open_count++;
-	ccp->auerdev = cp;
-	dbg("open %s as /dev/%s", cp->dev_desc, cp->name);
-	mutex_unlock(&cp->mutex);
-
-	/* file IO stuff */
-	file->f_pos = 0;
-	file->private_data = ccp;
-	return nonseekable_open(inode, file);
-
-	/* Error exit */
-ofail:	mutex_unlock(&cp->mutex);
-	auerchar_delete (ccp);
-	return ret;
-}
-
-
-/* IOCTL functions */
-static long auerchar_ioctl(struct file *file, unsigned int cmd,
-							unsigned long arg)
-{
-	pauerchar_t ccp = (pauerchar_t) file->private_data;
-	int ret = 0;
-        audevinfo_t devinfo;
-        pauerswald_t cp = NULL;
-	unsigned int u;
-	unsigned int __user *user_arg = (unsigned int __user *)arg;
-
-        dbg ("ioctl");
-
-	/* get the mutexes */
-	if (mutex_lock_interruptible(&ccp->mutex)) {
-		return -ERESTARTSYS;
-	}
-	cp = ccp->auerdev;
-	if (!cp) {
-		mutex_unlock(&ccp->mutex);
-                return -ENODEV;
-	}
-	if (mutex_lock_interruptible(&cp->mutex)) {
-		mutex_unlock(&ccp->mutex);
-		return -ERESTARTSYS;
-	}
-
-	/* Check for removal */
-	if (!cp->usbdev) {
-		mutex_unlock(&cp->mutex);
-		mutex_unlock(&ccp->mutex);
-                return -ENODEV;
-	}
-	lock_kernel();
-	switch (cmd) {
-
-	/* return != 0 if Transmitt channel ready to send */
-	case IOCTL_AU_TXREADY:
-		dbg ("IOCTL_AU_TXREADY");
-		u   = ccp->auerdev
-		   && (ccp->scontext.id != AUH_UNASSIGNED)
-		   && !list_empty (&cp->bufctl.free_buff_list);
-	        ret = put_user (u, user_arg);
-		break;
-
-	/* return != 0 if connected to a service channel */
-	case IOCTL_AU_CONNECT:
-		dbg ("IOCTL_AU_CONNECT");
-		u = (ccp->scontext.id != AUH_UNASSIGNED);
-	        ret = put_user (u, user_arg);
-		break;
-
-	/* return != 0 if Receive Data available */
-	case IOCTL_AU_RXAVAIL:
-		dbg ("IOCTL_AU_RXAVAIL");
-		if (ccp->scontext.id == AUH_UNASSIGNED) {
-                        ret = -EIO;
-                        break;
-                }
-		u = 0;	/* no data */
-		if (ccp->readbuf) {
-			int restlen = ccp->readbuf->len - ccp->readoffset;
-			if (restlen > 0)
-				u = 1;
-		}
-		if (!u) {
-        		if (!list_empty (&ccp->bufctl.rec_buff_list)) {
-				u = 1;
-			}
-		}
-	        ret = put_user (u, user_arg);
-		break;
-
-	/* return the max. buffer length for the device */
-	case IOCTL_AU_BUFLEN:
-		dbg ("IOCTL_AU_BUFLEN");
-		u = cp->maxControlLength;
-	        ret = put_user (u, user_arg);
-		break;
-
-	/* requesting a service channel */
-        case IOCTL_AU_SERVREQ:
-		dbg ("IOCTL_AU_SERVREQ");
-                /* requesting a service means: release the previous one first */
-		auerswald_removeservice (cp, &ccp->scontext);
-		/* get the channel number */
-		ret = get_user (u, user_arg);
-		if (ret) {
-			break;
-		}
-		if ((u < AUH_FIRSTUSERCH) || (u >= AUH_TYPESIZE)) {
-                        ret = -EIO;
-                        break;
-                }
-                dbg ("auerchar service request parameters are ok");
-		ccp->scontext.id = u;
-
-		/* request the service now */
-		ret = auerswald_addservice (cp, &ccp->scontext);
-		if (ret) {
-			/* no: revert service entry */
-                	ccp->scontext.id = AUH_UNASSIGNED;
-		}
-		break;
-
-	/* get a string descriptor for the device */
-	case IOCTL_AU_DEVINFO:
-		dbg ("IOCTL_AU_DEVINFO");
-                if (copy_from_user (&devinfo, (void __user *) arg, sizeof (audevinfo_t))) {
-        		ret = -EFAULT;
-	        	break;
-                }
-		u = strlen(cp->dev_desc)+1;
-		if (u > devinfo.bsize) {
-			u = devinfo.bsize;
-		}
-		ret = copy_to_user(devinfo.buf, cp->dev_desc, u) ? -EFAULT : 0;
-		break;
-
-	/* get the max. string descriptor length */
-        case IOCTL_AU_SLEN:
-		dbg ("IOCTL_AU_SLEN");
-		u = AUSI_DLEN;
-	        ret = put_user (u, user_arg);
-		break;
-
-	default:
-		dbg ("IOCTL_AU_UNKNOWN");
-		ret = -ENOTTY;
-		break;
-        }
-        unlock_kernel();
-	/* release the mutexes */
-	mutex_unlock(&cp->mutex);
-	mutex_unlock(&ccp->mutex);
-	return ret;
-}
-
-/* Read data from the device */
-static ssize_t auerchar_read (struct file *file, char __user *buf, size_t count, loff_t * ppos)
-{
-        unsigned long flags;
-	pauerchar_t ccp = (pauerchar_t) file->private_data;
-        pauerbuf_t   bp = NULL;
-	wait_queue_t wait;
-
-        dbg ("auerchar_read");
-
-	/* Error checking */
-	if (!ccp)
-		return -EIO;
-	if (*ppos)
- 		return -ESPIPE;
-        if (count == 0)
-		return 0;
-
-	/* get the mutex */
-	if (mutex_lock_interruptible(&ccp->mutex))
-		return -ERESTARTSYS;
-
-	/* Can we expect to read something? */
-	if (ccp->scontext.id == AUH_UNASSIGNED) {
-		mutex_unlock(&ccp->mutex);
-                return -EIO;
-	}
-
-	/* only one reader per device allowed */
-	if (mutex_lock_interruptible(&ccp->readmutex)) {
-		mutex_unlock(&ccp->mutex);
-		return -ERESTARTSYS;
-	}
-
-	/* read data from readbuf, if available */
-doreadbuf:
-	bp = ccp->readbuf;
-	if (bp) {
-		/* read the maximum bytes */
-		int restlen = bp->len - ccp->readoffset;
-		if (restlen < 0)
-			restlen = 0;
-		if (count > restlen)
-			count = restlen;
-		if (count) {
-			if (copy_to_user (buf, bp->bufp+ccp->readoffset, count)) {
-				dbg ("auerswald_read: copy_to_user failed");
-				mutex_unlock(&ccp->readmutex);
-				mutex_unlock(&ccp->mutex);
-				return -EFAULT;
-			}
-		}
-		/* advance the read offset */
-		ccp->readoffset += count;
-		restlen -= count;
-		// reuse the read buffer
-		if (restlen <= 0) {
-			auerbuf_releasebuf (bp);
-			ccp->readbuf = NULL;
-		}
-		/* return with number of bytes read */
-		if (count) {
-			mutex_unlock(&ccp->readmutex);
-			mutex_unlock(&ccp->mutex);
-			return count;
-		}
-	}
-
-	/* a read buffer is not available. Try to get the next data block. */
-doreadlist:
-	/* Preparing for sleep */
-	init_waitqueue_entry (&wait, current);
-	set_current_state (TASK_INTERRUPTIBLE);
-	add_wait_queue (&ccp->readwait, &wait);
-
-	bp = NULL;
-	spin_lock_irqsave (&ccp->bufctl.lock, flags);
-        if (!list_empty (&ccp->bufctl.rec_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = ccp->bufctl.rec_buff_list.next;
-                list_del (tmp);
-                bp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&ccp->bufctl.lock, flags);
-
-	/* have we got data? */
-	if (bp) {
-		ccp->readbuf = bp;
-		ccp->readoffset = AUH_SIZE; /* for headerbyte */
-		set_current_state (TASK_RUNNING);
-		remove_wait_queue (&ccp->readwait, &wait);
-		goto doreadbuf;		  /* now we can read! */
-	}
-
-	/* no data available. Should we wait? */
-	if (file->f_flags & O_NONBLOCK) {
-                dbg ("No read buffer available, returning -EAGAIN");
-		set_current_state (TASK_RUNNING);
-		remove_wait_queue (&ccp->readwait, &wait);
-		mutex_unlock(&ccp->readmutex);
-		mutex_unlock(&ccp->mutex);
-		return -EAGAIN;  /* nonblocking, no data available */
-        }
-
-	/* yes, we should wait! */
-	mutex_unlock(&ccp->mutex); /* allow other operations while we wait */
-	schedule();
-	remove_wait_queue (&ccp->readwait, &wait);
-	if (signal_pending (current)) {
-		/* waked up by a signal */
-		mutex_unlock(&ccp->readmutex);
-		return -ERESTARTSYS;
-	}
-
-	/* Anything left to read? */
-	if ((ccp->scontext.id == AUH_UNASSIGNED) || ccp->removed) {
-		mutex_unlock(&ccp->readmutex);
-		return -EIO;
-	}
-
-	if (mutex_lock_interruptible(&ccp->mutex)) {
-		mutex_unlock(&ccp->readmutex);
-		return -ERESTARTSYS;
-	}
-
-	/* try to read the incoming data again */
-	goto doreadlist;
-}
-
-
-/* Write a data block into the right service channel of the device */
-static ssize_t auerchar_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos)
-{
-	pauerchar_t ccp = (pauerchar_t) file->private_data;
-        pauerswald_t cp = NULL;
-        pauerbuf_t bp;
-        unsigned long flags;
-	int ret;
-	wait_queue_t wait;
-
-        dbg ("auerchar_write %zd bytes", len);
-
-	/* Error checking */
-	if (!ccp)
-		return -EIO;
-        if (*ppos)
-		return -ESPIPE;
-        if (len == 0)
-                return 0;
-
-write_again:
-	/* get the mutex */
-	if (mutex_lock_interruptible(&ccp->mutex))
-		return -ERESTARTSYS;
-
-	/* Can we expect to write something? */
-	if (ccp->scontext.id == AUH_UNASSIGNED) {
-		mutex_unlock(&ccp->mutex);
-                return -EIO;
-	}
-
-	cp = ccp->auerdev;
-	if (!cp) {
-		mutex_unlock(&ccp->mutex);
-		return -ERESTARTSYS;
-	}
-	if (mutex_lock_interruptible(&cp->mutex)) {
-		mutex_unlock(&ccp->mutex);
-		return -ERESTARTSYS;
-	}
-	if (!cp->usbdev) {
-		mutex_unlock(&cp->mutex);
-		mutex_unlock(&ccp->mutex);
-		return -EIO;
-	}
-	/* Prepare for sleep */
-	init_waitqueue_entry (&wait, current);
-	set_current_state (TASK_INTERRUPTIBLE);
-	add_wait_queue (&cp->bufferwait, &wait);
-
-	/* Try to get a buffer from the device pool.
-	   We can't use a buffer from ccp->bufctl because the write
-	   command will last beond a release() */
-	bp = NULL;
-	spin_lock_irqsave (&cp->bufctl.lock, flags);
-        if (!list_empty (&cp->bufctl.free_buff_list)) {
-                /* yes: get the entry */
-                struct list_head *tmp = cp->bufctl.free_buff_list.next;
-                list_del (tmp);
-                bp = list_entry (tmp, auerbuf_t, buff_list);
-        }
-        spin_unlock_irqrestore (&cp->bufctl.lock, flags);
-
-	/* are there any buffers left? */
-	if (!bp) {
-		mutex_unlock(&cp->mutex);
-		mutex_unlock(&ccp->mutex);
-
-		/* NONBLOCK: don't wait */
-		if (file->f_flags & O_NONBLOCK) {
-			set_current_state (TASK_RUNNING);
-			remove_wait_queue (&cp->bufferwait, &wait);
-			return -EAGAIN;
-		}
-
-		/* BLOCKING: wait */
-		schedule();
-		remove_wait_queue (&cp->bufferwait, &wait);
-		if (signal_pending (current)) {
-			/* waked up by a signal */
-			return -ERESTARTSYS;
-		}
-		goto write_again;
-	} else {
-		set_current_state (TASK_RUNNING);
-		remove_wait_queue (&cp->bufferwait, &wait);
-	}
-
-	/* protect against too big write requests */
-	if (len > cp->maxControlLength)
-		len = cp->maxControlLength;
-
-	/* Fill the buffer */
-	if (copy_from_user ( bp->bufp+AUH_SIZE, buf, len)) {
-		dbg ("copy_from_user failed");
-		auerbuf_releasebuf (bp);
-		/* Wake up all processes waiting for a buffer */
-		wake_up (&cp->bufferwait);
-		mutex_unlock(&cp->mutex);
-		mutex_unlock(&ccp->mutex);
-		return -EFAULT;
-	}
-
-	/* set the header byte */
-        *(bp->bufp) = ccp->scontext.id | AUH_DIRECT | AUH_UNSPLIT;
-
-	/* Set the transfer Parameters */
-	bp->len = len+AUH_SIZE;
-        bp->dr->bRequestType = AUT_WREQ;
-	bp->dr->bRequest     = AUV_WBLOCK;
-	bp->dr->wValue       = cpu_to_le16 (0);
-	bp->dr->wIndex       = cpu_to_le16 (ccp->scontext.id | AUH_DIRECT | AUH_UNSPLIT);
-	bp->dr->wLength      = cpu_to_le16 (len+AUH_SIZE);
-	usb_fill_control_urb (bp->urbp, cp->usbdev, usb_sndctrlpipe (cp->usbdev, 0),
-                   (unsigned char*)bp->dr, bp->bufp, len+AUH_SIZE,
-		    auerchar_ctrlwrite_complete, bp);
-	/* up we go */
-	ret = auerchain_submit_urb (&cp->controlchain, bp->urbp);
-	mutex_unlock(&cp->mutex);
-	if (ret) {
-		dbg ("auerchar_write: nonzero result of auerchain_submit_urb %d", ret);
-		auerbuf_releasebuf (bp);
-		/* Wake up all processes waiting for a buffer */
-		wake_up (&cp->bufferwait);
-		mutex_unlock(&ccp->mutex);
-		return -EIO;
-	}
-	else {
-		dbg ("auerchar_write: Write OK");
-		mutex_unlock(&ccp->mutex);
-		return len;
-	}
-}
-
-
-/* Close a character device */
-static int auerchar_release (struct inode *inode, struct file *file)
-{
-	pauerchar_t ccp = (pauerchar_t) file->private_data;
-	pauerswald_t cp;
-	dbg("release");
-
-	mutex_lock(&ccp->mutex);
-	cp = ccp->auerdev;
-	if (cp) {
-		mutex_lock(&cp->mutex);
-		/* remove an open service */
-		auerswald_removeservice (cp, &ccp->scontext);
-		/* detach from device */
-		if ((--cp->open_count <= 0) && (cp->usbdev == NULL)) {
-			/* usb device waits for removal */
-			mutex_unlock(&cp->mutex);
-			auerswald_delete (cp);
-		} else {
-			mutex_unlock(&cp->mutex);
-		}
-		cp = NULL;
-		ccp->auerdev = NULL;
-	}
-	mutex_unlock(&ccp->mutex);
-	auerchar_delete (ccp);
-
-	return 0;
-}
-
-
-/*----------------------------------------------------------------------*/
-/* File operation structure                                             */
-static const struct file_operations auerswald_fops =
-{
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.read =		auerchar_read,
-	.write =        auerchar_write,
-	.unlocked_ioctl = auerchar_ioctl,
-	.open =		auerchar_open,
-	.release =	auerchar_release,
-};
-
-static struct usb_class_driver auerswald_class = {
-	.name =		"auer%d",
-	.fops =		&auerswald_fops,
-	.minor_base =	AUER_MINOR_BASE,
-};
-
-
-/* --------------------------------------------------------------------- */
-/* Special USB driver functions                                          */
-
-/* Probe if this driver wants to serve an USB device
-
-   This entry point is called whenever a new device is attached to the bus.
-   Then the device driver has to create a new instance of its internal data
-   structures for the new device.
-
-   The  dev argument specifies the device context, which contains pointers
-   to all USB descriptors. The  interface argument specifies the interface
-   number. If a USB driver wants to bind itself to a particular device and
-   interface it has to return a pointer. This pointer normally references
-   the device driver's context structure.
-
-   Probing normally is done by checking the vendor and product identifications
-   or the class and subclass definitions. If they match the interface number
-   is compared with the ones supported by the driver. When probing is done
-   class based it might be necessary to parse some more USB descriptors because
-   the device properties can differ in a wide range.
-*/
-static int auerswald_probe (struct usb_interface *intf,
-			    const struct usb_device_id *id)
-{
-	struct usb_device *usbdev = interface_to_usbdev(intf);
-	pauerswald_t cp = NULL;
-	unsigned int u = 0;
-	__le16 *pbuf;
-	int ret;
-
-	dbg ("probe: vendor id 0x%x, device id 0x%x",
-	     le16_to_cpu(usbdev->descriptor.idVendor),
-	     le16_to_cpu(usbdev->descriptor.idProduct));
-
-        /* we use only the first -and only- interface */
-        if (intf->altsetting->desc.bInterfaceNumber != 0)
-		return -ENODEV;
-
-	/* allocate memory for our device and initialize it */
-	cp = kzalloc (sizeof(auerswald_t), GFP_KERNEL);
-	if (cp == NULL) {
-		err ("out of memory");
-		goto pfail;
-	}
-
-	/* Initialize device descriptor */
-	mutex_init(&cp->mutex);
-	cp->usbdev = usbdev;
-	auerchain_init (&cp->controlchain);
-        auerbuf_init (&cp->bufctl);
-	init_waitqueue_head (&cp->bufferwait);
-
-	ret = usb_register_dev(intf, &auerswald_class);
-	if (ret) {
-		err ("Not able to get a minor for this device.");
-		goto pfail;
-	}
-
-	/* Give the device a name */
-	sprintf (cp->name, "usb/auer%d", intf->minor);
-
-	/* Store the index */
-	cp->dtindex = intf->minor;
-
-	/* Get the usb version of the device */
-	cp->version = le16_to_cpu(cp->usbdev->descriptor.bcdDevice);
-	dbg ("Version is %X", cp->version);
-
-	/* allow some time to settle the device */
-	msleep(334);
-
-	/* Try to get a suitable textual description of the device */
-	/* Device name:*/
-	ret = usb_string( cp->usbdev, AUSI_DEVICE, cp->dev_desc, AUSI_DLEN-1);
-	if (ret >= 0) {
-		u += ret;
-		/* Append Serial Number */
-		memcpy(&cp->dev_desc[u], ",Ser# ", 6);
-		u += 6;
-		ret = usb_string( cp->usbdev, AUSI_SERIALNR, &cp->dev_desc[u], AUSI_DLEN-u-1);
-		if (ret >= 0) {
-			u += ret;
-			/* Append subscriber number */
-			memcpy(&cp->dev_desc[u], ", ", 2);
-			u += 2;
-			ret = usb_string( cp->usbdev, AUSI_MSN, &cp->dev_desc[u], AUSI_DLEN-u-1);
-			if (ret >= 0) {
-				u += ret;
-			}
-		}
-	}
-	cp->dev_desc[u] = '\0';
-	info("device is a %s", cp->dev_desc);
-
-        /* get the maximum allowed control transfer length */
-        pbuf = kmalloc(2, GFP_KERNEL);    /* use an allocated buffer because of urb target */
-        if (!pbuf) {
-		err( "out of memory");
-		goto pfail;
-	}
-        ret = usb_control_msg(cp->usbdev,           /* pointer to device */
-                usb_rcvctrlpipe( cp->usbdev, 0 ),   /* pipe to control endpoint */
-                AUV_GETINFO,                        /* USB message request value */
-                AUT_RREQ,                           /* USB message request type value */
-                0,                                  /* USB message value */
-                AUDI_MBCTRANS,                      /* USB message index value */
-                pbuf,                               /* pointer to the receive buffer */
-                2,                                  /* length of the buffer */
-                2000);                            /* time to wait for the message to complete before timing out */
-        if (ret == 2) {
-	        cp->maxControlLength = le16_to_cpup(pbuf);
-                kfree(pbuf);
-                dbg("setup: max. allowed control transfersize is %d bytes", cp->maxControlLength);
-        } else {
-                kfree(pbuf);
-                err("setup: getting max. allowed control transfer length failed with error %d", ret);
-		goto pfail;
-        }
-
-	/* allocate a chain for the control messages */
-        if (auerchain_setup (&cp->controlchain, AUCH_ELEMENTS)) {
-		err ("out of memory");
-		goto pfail;
-	}
-
-        /* allocate buffers for control messages */
-	if (auerbuf_setup (&cp->bufctl, AU_RBUFFERS, cp->maxControlLength+AUH_SIZE)) {
-		err ("out of memory");
-		goto pfail;
-	}
-
-	/* start the interrupt endpoint */
-	if (auerswald_int_open (cp)) {
-		err ("int endpoint failed");
-		goto pfail;
-	}
-
-	/* all OK */
-	usb_set_intfdata (intf, cp);
-	return 0;
-
-	/* Error exit: clean up the memory */
-pfail:	auerswald_delete (cp);
-	return -EIO;
-}
-
-
-/* Disconnect driver from a served device
-
-   This function is called whenever a device which was served by this driver
-   is disconnected.
-
-   The argument  dev specifies the device context and the  driver_context
-   returns a pointer to the previously registered  driver_context of the
-   probe function. After returning from the disconnect function the USB
-   framework completely deallocates all data structures associated with
-   this device. So especially the usb_device structure must not be used
-   any longer by the usb driver.
-*/
-static void auerswald_disconnect (struct usb_interface *intf)
-{
-	pauerswald_t cp = usb_get_intfdata (intf);
-	unsigned int u;
-
-	usb_set_intfdata (intf, NULL);
-	if (!cp)
-		return;
-
-	/* give back our USB minor number */
-	usb_deregister_dev(intf, &auerswald_class);
-
-	mutex_lock(&cp->mutex);
-	info ("device /dev/%s now disconnecting", cp->name);
-
-	/* Stop the interrupt endpoint */
-	auerswald_int_release (cp);
-
-	/* remove the control chain allocated in auerswald_probe
-	   This has the benefit of
-	   a) all pending (a)synchronous urbs are unlinked
-	   b) all buffers dealing with urbs are reclaimed
-	*/
-	auerchain_free (&cp->controlchain);
-
-	if (cp->open_count == 0) {
-		/* nobody is using this device. So we can clean up now */
-		mutex_unlock(&cp->mutex);
-		/* mutex_unlock() is possible here because no other task
-		   can open the device (see above). I don't want
-		   to kfree() a locked mutex. */
-
-		auerswald_delete (cp);
-	} else {
-		/* device is used. Remove the pointer to the
-		   usb device (it's not valid any more). The last
-		   release() will do the clean up */
-		cp->usbdev = NULL;
-		mutex_unlock(&cp->mutex);
-		/* Terminate waiting writers */
-		wake_up (&cp->bufferwait);
-		/* Inform all waiting readers */
-		for ( u = 0; u < AUH_TYPESIZE; u++) {
-			pauerscon_t scp = cp->services[u];
-			if (scp)
-				scp->disconnect( scp);
-		}
-	}
-}
-
-/* Descriptor for the devices which are served by this driver.
-   NOTE: this struct is parsed by the usbmanager install scripts.
-         Don't change without caution!
-*/
-static struct usb_device_id auerswald_ids [] = {
-	{ USB_DEVICE (ID_AUERSWALD, 0x00C0) },          /* COMpact 2104 USB */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00DB) },          /* COMpact 4410/2206 USB */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00DC) }, /* COMpact 4406 DSL */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00DD) }, /* COMpact 2204 USB */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00F1) },          /* Comfort 2000 System Telephone */
-	{ USB_DEVICE (ID_AUERSWALD, 0x00F2) },          /* Comfort 1200 System Telephone */
-        { }			                        /* Terminating entry */
-};
-
-/* Standard module device table */
-MODULE_DEVICE_TABLE (usb, auerswald_ids);
-
-/* Standard usb driver struct */
-static struct usb_driver auerswald_driver = {
-	.name =		"auerswald",
-	.probe =	auerswald_probe,
-	.disconnect =	auerswald_disconnect,
-	.id_table =	auerswald_ids,
-};
-
-
-/* --------------------------------------------------------------------- */
-/* Module loading/unloading                                              */
-
-/* Driver initialisation. Called after module loading.
-   NOTE: there is no concurrency at _init
-*/
-static int __init auerswald_init (void)
-{
-	int result;
-	dbg ("init");
-
-	/* register driver at the USB subsystem */
-	result = usb_register (&auerswald_driver);
-	if (result < 0) {
-		err ("driver could not be registered");
-		return -1;
-	}
-	return 0;
-}
-
-/* Driver deinit. Called before module removal.
-   NOTE: there is no concurrency at _cleanup
-*/
-static void __exit auerswald_cleanup (void)
-{
-	dbg ("cleanup");
-	usb_deregister (&auerswald_driver);
-}
-
-/* --------------------------------------------------------------------- */
-/* Linux device driver module description                                */
-
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
-
-module_init (auerswald_init);
-module_exit (auerswald_cleanup);
-
-/* --------------------------------------------------------------------- */
-
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index d94aa738760..b897f6554ec 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -48,7 +48,8 @@ static int isight_firmware_load(struct usb_interface *intf,
 
 	if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
 		printk(KERN_ERR "Unable to load isight firmware\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out;
 	}
 
 	ptr = firmware->data;
@@ -91,7 +92,6 @@ static int isight_firmware_load(struct usb_interface *intf,
 			     buf, llen, 300) != llen) {
 				printk(KERN_ERR
 				       "Failed to load isight firmware\n");
-				kfree(buf);
 				ret = -ENODEV;
 				goto out;
 			}
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
new file mode 100644
index 00000000000..faca4333f27
--- /dev/null
+++ b/drivers/usb/musb/Kconfig
@@ -0,0 +1,176 @@
+#
+# USB Dual Role (OTG-ready) Controller Drivers
+# for silicon based on Mentor Graphics INVENTRA designs
+#
+
+comment "Enable Host or Gadget support to see Inventra options"
+	depends on !USB && USB_GADGET=n
+
+# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
+config USB_MUSB_HDRC
+	depends on (USB || USB_GADGET) && HAVE_CLK
+	select TWL4030_USB if MACH_OMAP_3430SDP
+	tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'
+	help
+	  Say Y here if your system has a dual role high speed USB
+	  controller based on the Mentor Graphics silicon IP.  Then
+	  configure options to match your silicon and the board
+	  it's being used with, including the USB peripheral role,
+	  or the USB host role, or both.
+
+	  Texas Instruments parts using this IP include DaVinci 644x,
+	  OMAP 243x, OMAP 343x, and TUSB 6010.
+
+	  If you do not know what this is, please say N.
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called "musb_hdrc".
+
+config USB_MUSB_SOC
+	boolean
+	depends on USB_MUSB_HDRC
+	default y if ARCH_DAVINCI
+	default y if ARCH_OMAP2430
+	default y if ARCH_OMAP34XX
+	help
+	  Use a static <asm/arch/hdrc_cnf.h> file to describe how the
+	  controller is configured (endpoints, mechanisms, etc) on the
+	  current iteration of a given system-on-chip.
+
+comment "DaVinci 644x USB support"
+	depends on USB_MUSB_HDRC && ARCH_DAVINCI
+
+comment "OMAP 243x high speed USB support"
+	depends on USB_MUSB_HDRC && ARCH_OMAP2430
+
+comment "OMAP 343x high speed USB support"
+	depends on USB_MUSB_HDRC && ARCH_OMAP34XX
+
+config USB_TUSB6010
+	boolean "TUSB 6010 support"
+	depends on USB_MUSB_HDRC && !USB_MUSB_SOC
+	default y
+	help
+	  The TUSB 6010 chip, from Texas Instruments, connects a discrete
+	  HDRC core using a 16-bit parallel bus (NOR flash style) or VLYNQ
+	  (a high speed serial link).  It can use system-specific external
+	  DMA controllers.
+
+choice
+	prompt "Driver Mode"
+	depends on USB_MUSB_HDRC
+	help
+	  Dual-Role devices can support both host and peripheral roles,
+	  as well as a the special "OTG Device" role which can switch
+	  between both roles as needed.
+
+# use USB_MUSB_HDRC_HCD not USB_MUSB_HOST to #ifdef host side support;
+# OTG needs both roles, not just USB_MUSB_HOST.
+config USB_MUSB_HOST
+	depends on USB
+	bool "USB Host"
+	help
+	  Say Y here if your system supports the USB host role.
+	  If it has a USB "A" (rectangular), "Mini-A" (uncommon),
+	  or "Mini-AB" connector, it supports the host role.
+	  (With a "Mini-AB" connector, you should enable USB OTG.)
+
+# use USB_GADGET_MUSB_HDRC not USB_MUSB_PERIPHERAL to #ifdef peripheral
+# side support ... OTG needs both roles
+config USB_MUSB_PERIPHERAL
+	depends on USB_GADGET
+	bool "USB Peripheral (gadget stack)"
+	select USB_GADGET_MUSB_HDRC
+	help
+	  Say Y here if your system supports the USB peripheral role.
+	  If it has a USB "B" (squarish), "Mini-B", or "Mini-AB"
+	  connector, it supports the peripheral role.
+	  (With a "Mini-AB" connector, you should enable USB OTG.)
+
+config USB_MUSB_OTG
+	depends on USB && USB_GADGET && PM && EXPERIMENTAL
+	bool "Both host and peripheral:  USB OTG (On The Go) Device"
+	select USB_GADGET_MUSB_HDRC
+	select USB_OTG
+	help
+	   The most notable feature of USB OTG is support for a
+	   "Dual-Role" device, which can act as either a device
+	   or a host.  The initial role choice can be changed
+	   later, when two dual-role devices talk to each other.
+
+	   At this writing, the OTG support in this driver is incomplete,
+	   omitting the mandatory HNP or SRP protocols.  However, some
+	   of the cable based role switching works.  (That is, grounding
+	   the ID pin switches the controller to host mode, while leaving
+	   it floating leaves it in peripheral mode.)
+
+	   Select this if your system has a Mini-AB connector, or
+	   to simplify certain kinds of configuration.
+
+	   To implement your OTG Targeted Peripherals List (TPL), enable
+	   USB_OTG_WHITELIST and update "drivers/usb/core/otg_whitelist.h"
+	   to match your requirements.
+
+endchoice
+
+# enable peripheral support (including with OTG)
+config USB_GADGET_MUSB_HDRC
+	bool
+	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
+#	default y
+#	select USB_GADGET_DUALSPEED
+#	select USB_GADGET_SELECTED
+
+# enables host support (including with OTG)
+config USB_MUSB_HDRC_HCD
+	bool
+	depends on USB_MUSB_HDRC && (USB_MUSB_HOST || USB_MUSB_OTG)
+	select USB_OTG if USB_GADGET_MUSB_HDRC
+	default y
+
+
+config MUSB_PIO_ONLY
+	bool 'Disable DMA (always use PIO)'
+	depends on USB_MUSB_HDRC
+	default y if USB_TUSB6010
+	help
+	  All data is copied between memory and FIFO by the CPU.
+	  DMA controllers are ignored.
+
+	  Do not select 'n' here unless DMA support for your SOC or board
+	  is unavailable (or unstable).  When DMA is enabled at compile time,
+	  you can still disable it at run time using the "use_dma=n" module
+	  parameter.
+
+config USB_INVENTRA_DMA
+	bool
+	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+	default ARCH_OMAP2430 || ARCH_OMAP34XX
+	help
+	  Enable DMA transfers using Mentor's engine.
+
+config USB_TI_CPPI_DMA
+	bool
+	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+	default ARCH_DAVINCI
+	help
+	  Enable DMA transfers when TI CPPI DMA is available.
+
+config USB_TUSB_OMAP_DMA
+	bool
+	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
+	depends on USB_TUSB6010
+	depends on ARCH_OMAP
+	default y
+	help
+	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
+
+config	USB_MUSB_LOGLEVEL
+	depends on USB_MUSB_HDRC
+	int  'Logging Level (0 - none / 3 - annoying / ... )'
+	default 0
+	help
+	  Set the logging level. 0 disables the debugging altogether,
+	  although when USB_DEBUG is set the value is at least 1.
+	  Starting at level 3, per-transfer (urb, usb_request, packet,
+	  or dma transfer) tracing may kick in.
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
new file mode 100644
index 00000000000..88eb67de08a
--- /dev/null
+++ b/drivers/usb/musb/Makefile
@@ -0,0 +1,86 @@
+#
+# for USB OTG silicon based on Mentor Graphics INVENTRA designs
+#
+
+musb_hdrc-objs := musb_core.o
+
+obj-$(CONFIG_USB_MUSB_HDRC)	+= musb_hdrc.o
+
+ifeq ($(CONFIG_ARCH_DAVINCI),y)
+	musb_hdrc-objs	+= davinci.o
+endif
+
+ifeq ($(CONFIG_USB_TUSB6010),y)
+	musb_hdrc-objs	+= tusb6010.o
+endif
+
+ifeq ($(CONFIG_ARCH_OMAP2430),y)
+	musb_hdrc-objs	+= omap2430.o
+endif
+
+ifeq ($(CONFIG_ARCH_OMAP3430),y)
+	musb_hdrc-objs	+= omap2430.o
+endif
+
+ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
+	musb_hdrc-objs		+= musb_gadget_ep0.o musb_gadget.o
+endif
+
+ifeq ($(CONFIG_USB_MUSB_HDRC_HCD),y)
+	musb_hdrc-objs		+= musb_virthub.o musb_host.o
+endif
+
+# the kconfig must guarantee that only one of the
+# possible I/O schemes will be enabled at a time ...
+# PIO only, or DMA (several potential schemes).
+# though PIO is always there to back up DMA, and for ep0
+
+ifneq ($(CONFIG_MUSB_PIO_ONLY),y)
+
+  ifeq ($(CONFIG_USB_INVENTRA_DMA),y)
+    musb_hdrc-objs		+= musbhsdma.o
+
+  else
+    ifeq ($(CONFIG_USB_TI_CPPI_DMA),y)
+      musb_hdrc-objs		+= cppi_dma.o
+
+    else
+      ifeq ($(CONFIG_USB_TUSB_OMAP_DMA),y)
+        musb_hdrc-objs		+= tusb6010_omap.o
+
+      endif
+    endif
+  endif
+endif
+
+
+################################################################################
+
+# FIXME remove all these extra "-DMUSB_* things, stick to CONFIG_*
+
+ifeq ($(CONFIG_USB_INVENTRA_MUSB_HAS_AHB_ID),y)
+	EXTRA_CFLAGS += -DMUSB_AHB_ID
+endif
+
+# Debugging
+
+MUSB_DEBUG:=$(CONFIG_USB_MUSB_LOGLEVEL)
+
+ifeq ("$(strip $(MUSB_DEBUG))","")
+    ifdef CONFIG_USB_DEBUG
+	MUSB_DEBUG:=1
+    else
+	MUSB_DEBUG:=0
+    endif
+endif
+
+ifneq ($(MUSB_DEBUG),0)
+    EXTRA_CFLAGS += -DDEBUG
+
+    ifeq ($(CONFIG_PROC_FS),y)
+	musb_hdrc-objs		+= musb_procfs.o
+    endif
+
+endif
+
+EXTRA_CFLAGS += -DMUSB_DEBUG=$(MUSB_DEBUG)
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
new file mode 100644
index 00000000000..5ad6d0893cb
--- /dev/null
+++ b/drivers/usb/musb/cppi_dma.c
@@ -0,0 +1,1540 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file implements a DMA  interface using TI's CPPI DMA.
+ * For now it's DaVinci-only, but CPPI isn't specific to DaVinci or USB.
+ * The TUSB6020, using VLYNQ, has CPPI that looks much like DaVinci.
+ */
+
+#include <linux/usb.h>
+
+#include "musb_core.h"
+#include "cppi_dma.h"
+
+
+/* CPPI DMA status 7-mar-2006:
+ *
+ * - See musb_{host,gadget}.c for more info
+ *
+ * - Correct RX DMA generally forces the engine into irq-per-packet mode,
+ *   which can easily saturate the CPU under non-mass-storage loads.
+ *
+ * NOTES 24-aug-2006 (2.6.18-rc4):
+ *
+ * - peripheral RXDMA wedged in a test with packets of length 512/512/1.
+ *   evidently after the 1 byte packet was received and acked, the queue
+ *   of BDs got garbaged so it wouldn't empty the fifo.  (rxcsr 0x2003,
+ *   and RX DMA0: 4 left, 80000000 8feff880, 8feff860 8feff860; 8f321401
+ *   004001ff 00000001 .. 8feff860)  Host was just getting NAKed on tx
+ *   of its next (512 byte) packet.  IRQ issues?
+ *
+ * REVISIT:  the "transfer DMA" glue between CPPI and USB fifos will
+ * evidently also directly update the RX and TX CSRs ... so audit all
+ * host and peripheral side DMA code to avoid CSR access after DMA has
+ * been started.
+ */
+
+/* REVISIT now we can avoid preallocating these descriptors; or
+ * more simply, switch to a global freelist not per-channel ones.
+ * Note: at full speed, 64 descriptors == 4K bulk data.
+ */
+#define NUM_TXCHAN_BD       64
+#define NUM_RXCHAN_BD       64
+
+static inline void cpu_drain_writebuffer(void)
+{
+	wmb();
+#ifdef	CONFIG_CPU_ARM926T
+	/* REVISIT this "should not be needed",
+	 * but lack of it sure seemed to hurt ...
+	 */
+	asm("mcr p15, 0, r0, c7, c10, 4 @ drain write buffer\n");
+#endif
+}
+
+static inline struct cppi_descriptor *cppi_bd_alloc(struct cppi_channel *c)
+{
+	struct cppi_descriptor	*bd = c->freelist;
+
+	if (bd)
+		c->freelist = bd->next;
+	return bd;
+}
+
+static inline void
+cppi_bd_free(struct cppi_channel *c, struct cppi_descriptor *bd)
+{
+	if (!bd)
+		return;
+	bd->next = c->freelist;
+	c->freelist = bd;
+}
+
+/*
+ *  Start DMA controller
+ *
+ *  Initialize the DMA controller as necessary.
+ */
+
+/* zero out entire rx state RAM entry for the channel */
+static void cppi_reset_rx(struct cppi_rx_stateram __iomem *rx)
+{
+	musb_writel(&rx->rx_skipbytes, 0, 0);
+	musb_writel(&rx->rx_head, 0, 0);
+	musb_writel(&rx->rx_sop, 0, 0);
+	musb_writel(&rx->rx_current, 0, 0);
+	musb_writel(&rx->rx_buf_current, 0, 0);
+	musb_writel(&rx->rx_len_len, 0, 0);
+	musb_writel(&rx->rx_cnt_cnt, 0, 0);
+}
+
+/* zero out entire tx state RAM entry for the channel */
+static void cppi_reset_tx(struct cppi_tx_stateram __iomem *tx, u32 ptr)
+{
+	musb_writel(&tx->tx_head, 0, 0);
+	musb_writel(&tx->tx_buf, 0, 0);
+	musb_writel(&tx->tx_current, 0, 0);
+	musb_writel(&tx->tx_buf_current, 0, 0);
+	musb_writel(&tx->tx_info, 0, 0);
+	musb_writel(&tx->tx_rem_len, 0, 0);
+	/* musb_writel(&tx->tx_dummy, 0, 0); */
+	musb_writel(&tx->tx_complete, 0, ptr);
+}
+
+static void __init cppi_pool_init(struct cppi *cppi, struct cppi_channel *c)
+{
+	int	j;
+
+	/* initialize channel fields */
+	c->head = NULL;
+	c->tail = NULL;
+	c->last_processed = NULL;
+	c->channel.status = MUSB_DMA_STATUS_UNKNOWN;
+	c->controller = cppi;
+	c->is_rndis = 0;
+	c->freelist = NULL;
+
+	/* build the BD Free list for the channel */
+	for (j = 0; j < NUM_TXCHAN_BD + 1; j++) {
+		struct cppi_descriptor	*bd;
+		dma_addr_t		dma;
+
+		bd = dma_pool_alloc(cppi->pool, GFP_KERNEL, &dma);
+		bd->dma = dma;
+		cppi_bd_free(c, bd);
+	}
+}
+
+static int cppi_channel_abort(struct dma_channel *);
+
+static void cppi_pool_free(struct cppi_channel *c)
+{
+	struct cppi		*cppi = c->controller;
+	struct cppi_descriptor	*bd;
+
+	(void) cppi_channel_abort(&c->channel);
+	c->channel.status = MUSB_DMA_STATUS_UNKNOWN;
+	c->controller = NULL;
+
+	/* free all its bds */
+	bd = c->last_processed;
+	do {
+		if (bd)
+			dma_pool_free(cppi->pool, bd, bd->dma);
+		bd = cppi_bd_alloc(c);
+	} while (bd);
+	c->last_processed = NULL;
+}
+
+static int __init cppi_controller_start(struct dma_controller *c)
+{
+	struct cppi	*controller;
+	void __iomem	*tibase;
+	int		i;
+
+	controller = container_of(c, struct cppi, controller);
+
+	/* do whatever is necessary to start controller */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		controller->tx[i].transmit = true;
+		controller->tx[i].index = i;
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++) {
+		controller->rx[i].transmit = false;
+		controller->rx[i].index = i;
+	}
+
+	/* setup BD list on a per channel basis */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++)
+		cppi_pool_init(controller, controller->tx + i);
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++)
+		cppi_pool_init(controller, controller->rx + i);
+
+	tibase =  controller->tibase;
+	INIT_LIST_HEAD(&controller->tx_complete);
+
+	/* initialise tx/rx channel head pointers to zero */
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		struct cppi_channel	*tx_ch = controller->tx + i;
+		struct cppi_tx_stateram __iomem *tx;
+
+		INIT_LIST_HEAD(&tx_ch->tx_complete);
+
+		tx = tibase + DAVINCI_TXCPPI_STATERAM_OFFSET(i);
+		tx_ch->state_ram = tx;
+		cppi_reset_tx(tx, 0);
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++) {
+		struct cppi_channel	*rx_ch = controller->rx + i;
+		struct cppi_rx_stateram __iomem *rx;
+
+		INIT_LIST_HEAD(&rx_ch->tx_complete);
+
+		rx = tibase + DAVINCI_RXCPPI_STATERAM_OFFSET(i);
+		rx_ch->state_ram = rx;
+		cppi_reset_rx(rx);
+	}
+
+	/* enable individual cppi channels */
+	musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_INTENAB_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+
+	/* enable tx/rx CPPI control */
+	musb_writel(tibase, DAVINCI_TXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_ENABLE);
+
+	/* disable RNDIS mode, also host rx RNDIS autorequest */
+	musb_writel(tibase, DAVINCI_RNDIS_REG, 0);
+	musb_writel(tibase, DAVINCI_AUTOREQ_REG, 0);
+
+	return 0;
+}
+
+/*
+ *  Stop DMA controller
+ *
+ *  De-Init the DMA controller as necessary.
+ */
+
+static int cppi_controller_stop(struct dma_controller *c)
+{
+	struct cppi		*controller;
+	void __iomem		*tibase;
+	int			i;
+
+	controller = container_of(c, struct cppi, controller);
+
+	tibase = controller->tibase;
+	/* DISABLE INDIVIDUAL CHANNEL Interrupts */
+	musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_INTCLR_REG,
+			DAVINCI_DMA_ALL_CHANNELS_ENABLE);
+
+	DBG(1, "Tearing down RX and TX Channels\n");
+	for (i = 0; i < ARRAY_SIZE(controller->tx); i++) {
+		/* FIXME restructure of txdma to use bds like rxdma */
+		controller->tx[i].last_processed = NULL;
+		cppi_pool_free(controller->tx + i);
+	}
+	for (i = 0; i < ARRAY_SIZE(controller->rx); i++)
+		cppi_pool_free(controller->rx + i);
+
+	/* in Tx Case proper teardown is supported. We resort to disabling
+	 * Tx/Rx CPPI after cleanup of Tx channels. Before TX teardown is
+	 * complete TX CPPI cannot be disabled.
+	 */
+	/*disable tx/rx cppi */
+	musb_writel(tibase, DAVINCI_TXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_DISABLE);
+	musb_writel(tibase, DAVINCI_RXCPPI_CTRL_REG, DAVINCI_DMA_CTRL_DISABLE);
+
+	return 0;
+}
+
+/* While dma channel is allocated, we only want the core irqs active
+ * for fault reports, otherwise we'd get irqs that we don't care about.
+ * Except for TX irqs, where dma done != fifo empty and reusable ...
+ *
+ * NOTE: docs don't say either way, but irq masking **enables** irqs.
+ *
+ * REVISIT same issue applies to pure PIO usage too, and non-cppi dma...
+ */
+static inline void core_rxirq_disable(void __iomem *tibase, unsigned epnum)
+{
+	musb_writel(tibase, DAVINCI_USB_INT_MASK_CLR_REG, 1 << (epnum + 8));
+}
+
+static inline void core_rxirq_enable(void __iomem *tibase, unsigned epnum)
+{
+	musb_writel(tibase, DAVINCI_USB_INT_MASK_SET_REG, 1 << (epnum + 8));
+}
+
+
+/*
+ * Allocate a CPPI Channel for DMA.  With CPPI, channels are bound to
+ * each transfer direction of a non-control endpoint, so allocating
+ * (and deallocating) is mostly a way to notice bad housekeeping on
+ * the software side.  We assume the irqs are always active.
+ */
+static struct dma_channel *
+cppi_channel_allocate(struct dma_controller *c,
+		struct musb_hw_ep *ep, u8 transmit)
+{
+	struct cppi		*controller;
+	u8			index;
+	struct cppi_channel	*cppi_ch;
+	void __iomem		*tibase;
+
+	controller = container_of(c, struct cppi, controller);
+	tibase = controller->tibase;
+
+	/* ep0 doesn't use DMA; remember cppi indices are 0..N-1 */
+	index = ep->epnum - 1;
+
+	/* return the corresponding CPPI Channel Handle, and
+	 * probably disable the non-CPPI irq until we need it.
+	 */
+	if (transmit) {
+		if (index >= ARRAY_SIZE(controller->tx)) {
+			DBG(1, "no %cX%d CPPI channel\n", 'T', index);
+			return NULL;
+		}
+		cppi_ch = controller->tx + index;
+	} else {
+		if (index >= ARRAY_SIZE(controller->rx)) {
+			DBG(1, "no %cX%d CPPI channel\n", 'R', index);
+			return NULL;
+		}
+		cppi_ch = controller->rx + index;
+		core_rxirq_disable(tibase, ep->epnum);
+	}
+
+	/* REVISIT make this an error later once the same driver code works
+	 * with the other DMA engine too
+	 */
+	if (cppi_ch->hw_ep)
+		DBG(1, "re-allocating DMA%d %cX channel %p\n",
+				index, transmit ? 'T' : 'R', cppi_ch);
+	cppi_ch->hw_ep = ep;
+	cppi_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+	DBG(4, "Allocate CPPI%d %cX\n", index, transmit ? 'T' : 'R');
+	return &cppi_ch->channel;
+}
+
+/* Release a CPPI Channel.  */
+static void cppi_channel_release(struct dma_channel *channel)
+{
+	struct cppi_channel	*c;
+	void __iomem		*tibase;
+
+	/* REVISIT:  for paranoia, check state and abort if needed... */
+
+	c = container_of(channel, struct cppi_channel, channel);
+	tibase = c->controller->tibase;
+	if (!c->hw_ep)
+		DBG(1, "releasing idle DMA channel %p\n", c);
+	else if (!c->transmit)
+		core_rxirq_enable(tibase, c->index + 1);
+
+	/* for now, leave its cppi IRQ enabled (we won't trigger it) */
+	c->hw_ep = NULL;
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+}
+
+/* Context: controller irqlocked */
+static void
+cppi_dump_rx(int level, struct cppi_channel *c, const char *tag)
+{
+	void __iomem			*base = c->controller->mregs;
+	struct cppi_rx_stateram __iomem	*rx = c->state_ram;
+
+	musb_ep_select(base, c->index + 1);
+
+	DBG(level, "RX DMA%d%s: %d left, csr %04x, "
+			"%08x H%08x S%08x C%08x, "
+			"B%08x L%08x %08x .. %08x"
+			"\n",
+		c->index, tag,
+		musb_readl(c->controller->tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + 4 * c->index),
+		musb_readw(c->hw_ep->regs, MUSB_RXCSR),
+
+		musb_readl(&rx->rx_skipbytes, 0),
+		musb_readl(&rx->rx_head, 0),
+		musb_readl(&rx->rx_sop, 0),
+		musb_readl(&rx->rx_current, 0),
+
+		musb_readl(&rx->rx_buf_current, 0),
+		musb_readl(&rx->rx_len_len, 0),
+		musb_readl(&rx->rx_cnt_cnt, 0),
+		musb_readl(&rx->rx_complete, 0)
+		);
+}
+
+/* Context: controller irqlocked */
+static void
+cppi_dump_tx(int level, struct cppi_channel *c, const char *tag)
+{
+	void __iomem			*base = c->controller->mregs;
+	struct cppi_tx_stateram __iomem	*tx = c->state_ram;
+
+	musb_ep_select(base, c->index + 1);
+
+	DBG(level, "TX DMA%d%s: csr %04x, "
+			"H%08x S%08x C%08x %08x, "
+			"F%08x L%08x .. %08x"
+			"\n",
+		c->index, tag,
+		musb_readw(c->hw_ep->regs, MUSB_TXCSR),
+
+		musb_readl(&tx->tx_head, 0),
+		musb_readl(&tx->tx_buf, 0),
+		musb_readl(&tx->tx_current, 0),
+		musb_readl(&tx->tx_buf_current, 0),
+
+		musb_readl(&tx->tx_info, 0),
+		musb_readl(&tx->tx_rem_len, 0),
+		/* dummy/unused word 6 */
+		musb_readl(&tx->tx_complete, 0)
+		);
+}
+
+/* Context: controller irqlocked */
+static inline void
+cppi_rndis_update(struct cppi_channel *c, int is_rx,
+		void __iomem *tibase, int is_rndis)
+{
+	/* we may need to change the rndis flag for this cppi channel */
+	if (c->is_rndis != is_rndis) {
+		u32	value = musb_readl(tibase, DAVINCI_RNDIS_REG);
+		u32	temp = 1 << (c->index);
+
+		if (is_rx)
+			temp <<= 16;
+		if (is_rndis)
+			value |= temp;
+		else
+			value &= ~temp;
+		musb_writel(tibase, DAVINCI_RNDIS_REG, value);
+		c->is_rndis = is_rndis;
+	}
+}
+
+static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
+{
+	pr_debug("RXBD/%s %08x: "
+			"nxt %08x buf %08x off.blen %08x opt.plen %08x\n",
+			tag, bd->dma,
+			bd->hw_next, bd->hw_bufp, bd->hw_off_len,
+			bd->hw_options);
+}
+
+static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
+{
+#if MUSB_DEBUG > 0
+	struct cppi_descriptor	*bd;
+
+	if (!_dbg_level(level))
+		return;
+	cppi_dump_rx(level, rx, tag);
+	if (rx->last_processed)
+		cppi_dump_rxbd("last", rx->last_processed);
+	for (bd = rx->head; bd; bd = bd->next)
+		cppi_dump_rxbd("active", bd);
+#endif
+}
+
+
+/* NOTE:  DaVinci autoreq is ignored except for host side "RNDIS" mode RX;
+ * so we won't ever use it (see "CPPI RX Woes" below).
+ */
+static inline int cppi_autoreq_update(struct cppi_channel *rx,
+		void __iomem *tibase, int onepacket, unsigned n_bds)
+{
+	u32	val;
+
+#ifdef	RNDIS_RX_IS_USABLE
+	u32	tmp;
+	/* assert(is_host_active(musb)) */
+
+	/* start from "AutoReq never" */
+	tmp = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+	val = tmp & ~((0x3) << (rx->index * 2));
+
+	/* HCD arranged reqpkt for packet #1.  we arrange int
+	 * for all but the last one, maybe in two segments.
+	 */
+	if (!onepacket) {
+#if 0
+		/* use two segments, autoreq "all" then the last "never" */
+		val |= ((0x3) << (rx->index * 2));
+		n_bds--;
+#else
+		/* one segment, autoreq "all-but-last" */
+		val |= ((0x1) << (rx->index * 2));
+#endif
+	}
+
+	if (val != tmp) {
+		int n = 100;
+
+		/* make sure that autoreq is updated before continuing */
+		musb_writel(tibase, DAVINCI_AUTOREQ_REG, val);
+		do {
+			tmp = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+			if (tmp == val)
+				break;
+			cpu_relax();
+		} while (n-- > 0);
+	}
+#endif
+
+	/* REQPKT is turned off after each segment */
+	if (n_bds && rx->channel.actual_len) {
+		void __iomem	*regs = rx->hw_ep->regs;
+
+		val = musb_readw(regs, MUSB_RXCSR);
+		if (!(val & MUSB_RXCSR_H_REQPKT)) {
+			val |= MUSB_RXCSR_H_REQPKT | MUSB_RXCSR_H_WZC_BITS;
+			musb_writew(regs, MUSB_RXCSR, val);
+			/* flush writebufer */
+			val = musb_readw(regs, MUSB_RXCSR);
+		}
+	}
+	return n_bds;
+}
+
+
+/* Buffer enqueuing Logic:
+ *
+ *  - RX builds new queues each time, to help handle routine "early
+ *    termination" cases (faults, including errors and short reads)
+ *    more correctly.
+ *
+ *  - for now, TX reuses the same queue of BDs every time
+ *
+ * REVISIT long term, we want a normal dynamic model.
+ * ... the goal will be to append to the
+ * existing queue, processing completed "dma buffers" (segments) on the fly.
+ *
+ * Otherwise we force an IRQ latency between requests, which slows us a lot
+ * (especially in "transparent" dma).  Unfortunately that model seems to be
+ * inherent in the DMA model from the Mentor code, except in the rare case
+ * of transfers big enough (~128+ KB) that we could append "middle" segments
+ * in the TX paths.  (RX can't do this, see below.)
+ *
+ * That's true even in the CPPI- friendly iso case, where most urbs have
+ * several small segments provided in a group and where the "packet at a time"
+ * "transparent" DMA model is always correct, even on the RX side.
+ */
+
+/*
+ * CPPI TX:
+ * ========
+ * TX is a lot more reasonable than RX; it doesn't need to run in
+ * irq-per-packet mode very often.  RNDIS mode seems to behave too
+ * (except how it handles the exactly-N-packets case).  Building a
+ * txdma queue with multiple requests (urb or usb_request) looks
+ * like it would work ... but fault handling would need much testing.
+ *
+ * The main issue with TX mode RNDIS relates to transfer lengths that
+ * are an exact multiple of the packet length.  It appears that there's
+ * a hiccup in that case (maybe the DMA completes before the ZLP gets
+ * written?) boiling down to not being able to rely on CPPI writing any
+ * terminating zero length packet before the next transfer is written.
+ * So that's punted to PIO; better yet, gadget drivers can avoid it.
+ *
+ * Plus, there's allegedly an undocumented constraint that rndis transfer
+ * length be a multiple of 64 bytes ... but the chip doesn't act that
+ * way, and we really don't _want_ that behavior anyway.
+ *
+ * On TX, "transparent" mode works ... although experiments have shown
+ * problems trying to use the SOP/EOP bits in different USB packets.
+ *
+ * REVISIT try to handle terminating zero length packets using CPPI
+ * instead of doing it by PIO after an IRQ.  (Meanwhile, make Ethernet
+ * links avoid that issue by forcing them to avoid zlps.)
+ */
+static void
+cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
+{
+	unsigned		maxpacket = tx->maxpacket;
+	dma_addr_t		addr = tx->buf_dma + tx->offset;
+	size_t			length = tx->buf_len - tx->offset;
+	struct cppi_descriptor	*bd;
+	unsigned		n_bds;
+	unsigned		i;
+	struct cppi_tx_stateram	__iomem *tx_ram = tx->state_ram;
+	int			rndis;
+
+	/* TX can use the CPPI "rndis" mode, where we can probably fit this
+	 * transfer in one BD and one IRQ.  The only time we would NOT want
+	 * to use it is when hardware constraints prevent it, or if we'd
+	 * trigger the "send a ZLP?" confusion.
+	 */
+	rndis = (maxpacket & 0x3f) == 0
+		&& length < 0xffff
+		&& (length % maxpacket) != 0;
+
+	if (rndis) {
+		maxpacket = length;
+		n_bds = 1;
+	} else {
+		n_bds = length / maxpacket;
+		if (!length || (length % maxpacket))
+			n_bds++;
+		n_bds = min(n_bds, (unsigned) NUM_TXCHAN_BD);
+		length = min(n_bds * maxpacket, length);
+	}
+
+	DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%x len %u\n",
+			tx->index,
+			maxpacket,
+			rndis ? "rndis" : "transparent",
+			n_bds,
+			addr, length);
+
+	cppi_rndis_update(tx, 0, musb->ctrl_base, rndis);
+
+	/* assuming here that channel_program is called during
+	 * transfer initiation ... current code maintains state
+	 * for one outstanding request only (no queues, not even
+	 * the implicit ones of an iso urb).
+	 */
+
+	bd = tx->freelist;
+	tx->head = bd;
+	tx->last_processed = NULL;
+
+	/* FIXME use BD pool like RX side does, and just queue
+	 * the minimum number for this request.
+	 */
+
+	/* Prepare queue of BDs first, then hand it to hardware.
+	 * All BDs except maybe the last should be of full packet
+	 * size; for RNDIS there _is_ only that last packet.
+	 */
+	for (i = 0; i < n_bds; ) {
+		if (++i < n_bds && bd->next)
+			bd->hw_next = bd->next->dma;
+		else
+			bd->hw_next = 0;
+
+		bd->hw_bufp = tx->buf_dma + tx->offset;
+
+		/* FIXME set EOP only on the last packet,
+		 * SOP only on the first ... avoid IRQs
+		 */
+		if ((tx->offset + maxpacket) <= tx->buf_len) {
+			tx->offset += maxpacket;
+			bd->hw_off_len = maxpacket;
+			bd->hw_options = CPPI_SOP_SET | CPPI_EOP_SET
+				| CPPI_OWN_SET | maxpacket;
+		} else {
+			/* only this one may be a partial USB Packet */
+			u32		partial_len;
+
+			partial_len = tx->buf_len - tx->offset;
+			tx->offset = tx->buf_len;
+			bd->hw_off_len = partial_len;
+
+			bd->hw_options = CPPI_SOP_SET | CPPI_EOP_SET
+				| CPPI_OWN_SET | partial_len;
+			if (partial_len == 0)
+				bd->hw_options |= CPPI_ZERO_SET;
+		}
+
+		DBG(5, "TXBD %p: nxt %08x buf %08x len %04x opt %08x\n",
+				bd, bd->hw_next, bd->hw_bufp,
+				bd->hw_off_len, bd->hw_options);
+
+		/* update the last BD enqueued to the list */
+		tx->tail = bd;
+		bd = bd->next;
+	}
+
+	/* BDs live in DMA-coherent memory, but writes might be pending */
+	cpu_drain_writebuffer();
+
+	/* Write to the HeadPtr in state RAM to trigger */
+	musb_writel(&tx_ram->tx_head, 0, (u32)tx->freelist->dma);
+
+	cppi_dump_tx(5, tx, "/S");
+}
+
+/*
+ * CPPI RX Woes:
+ * =============
+ * Consider a 1KB bulk RX buffer in two scenarios:  (a) it's fed two 300 byte
+ * packets back-to-back, and (b) it's fed two 512 byte packets back-to-back.
+ * (Full speed transfers have similar scenarios.)
+ *
+ * The correct behavior for Linux is that (a) fills the buffer with 300 bytes,
+ * and the next packet goes into a buffer that's queued later; while (b) fills
+ * the buffer with 1024 bytes.  How to do that with CPPI?
+ *
+ * - RX queues in "rndis" mode -- one single BD -- handle (a) correctly, but
+ *   (b) loses **BADLY** because nothing (!) happens when that second packet
+ *   fills the buffer, much less when a third one arrives.  (Which makes this
+ *   not a "true" RNDIS mode.  In the RNDIS protocol short-packet termination
+ *   is optional, and it's fine if peripherals -- not hosts! -- pad messages
+ *   out to end-of-buffer.  Standard PCI host controller DMA descriptors
+ *   implement that mode by default ... which is no accident.)
+ *
+ * - RX queues in "transparent" mode -- two BDs with 512 bytes each -- have
+ *   converse problems:  (b) is handled right, but (a) loses badly.  CPPI RX
+ *   ignores SOP/EOP markings and processes both of those BDs; so both packets
+ *   are loaded into the buffer (with a 212 byte gap between them), and the next
+ *   buffer queued will NOT get its 300 bytes of data. (It seems like SOP/EOP
+ *   are intended as outputs for RX queues, not inputs...)
+ *
+ * - A variant of "transparent" mode -- one BD at a time -- is the only way to
+ *   reliably make both cases work, with software handling both cases correctly
+ *   and at the significant penalty of needing an IRQ per packet.  (The lack of
+ *   I/O overlap can be slightly ameliorated by enabling double buffering.)
+ *
+ * So how to get rid of IRQ-per-packet?  The transparent multi-BD case could
+ * be used in special cases like mass storage, which sets URB_SHORT_NOT_OK
+ * (or maybe its peripheral side counterpart) to flag (a) scenarios as errors
+ * with guaranteed driver level fault recovery and scrubbing out what's left
+ * of that garbaged datastream.
+ *
+ * But there seems to be no way to identify the cases where CPPI RNDIS mode
+ * is appropriate -- which do NOT include RNDIS host drivers, but do include
+ * the CDC Ethernet driver! -- and the documentation is incomplete/wrong.
+ * So we can't _ever_ use RX RNDIS mode ... except by using a heuristic
+ * that applies best on the peripheral side (and which could fail rudely).
+ *
+ * Leaving only "transparent" mode; we avoid multi-bd modes in almost all
+ * cases other than mass storage class.  Otherwise we're correct but slow,
+ * since CPPI penalizes our need for a "true RNDIS" default mode.
+ */
+
+
+/* Heuristic, intended to kick in for ethernet/rndis peripheral ONLY
+ *
+ * IFF
+ *  (a)	peripheral mode ... since rndis peripherals could pad their
+ *	writes to hosts, causing i/o failure; or we'd have to cope with
+ *	a largely unknowable variety of host side protocol variants
+ *  (b)	and short reads are NOT errors ... since full reads would
+ *	cause those same i/o failures
+ *  (c)	and read length is
+ *	- less than 64KB (max per cppi descriptor)
+ *	- not a multiple of 4096 (g_zero default, full reads typical)
+ *	- N (>1) packets long, ditto (full reads not EXPECTED)
+ * THEN
+ *   try rx rndis mode
+ *
+ * Cost of heuristic failing:  RXDMA wedges at the end of transfers that
+ * fill out the whole buffer.  Buggy host side usb network drivers could
+ * trigger that, but "in the field" such bugs seem to be all but unknown.
+ *
+ * So this module parameter lets the heuristic be disabled.  When using
+ * gadgetfs, the heuristic will probably need to be disabled.
+ */
+static int cppi_rx_rndis = 1;
+
+module_param(cppi_rx_rndis, bool, 0);
+MODULE_PARM_DESC(cppi_rx_rndis, "enable/disable RX RNDIS heuristic");
+
+
+/**
+ * cppi_next_rx_segment - dma read for the next chunk of a buffer
+ * @musb: the controller
+ * @rx: dma channel
+ * @onepacket: true unless caller treats short reads as errors, and
+ *	performs fault recovery above usbcore.
+ * Context: controller irqlocked
+ *
+ * See above notes about why we can't use multi-BD RX queues except in
+ * rare cases (mass storage class), and can never use the hardware "rndis"
+ * mode (since it's not a "true" RNDIS mode) with complete safety..
+ *
+ * It's ESSENTIAL that callers specify "onepacket" mode unless they kick in
+ * code to recover from corrupted datastreams after each short transfer.
+ */
+static void
+cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
+{
+	unsigned		maxpacket = rx->maxpacket;
+	dma_addr_t		addr = rx->buf_dma + rx->offset;
+	size_t			length = rx->buf_len - rx->offset;
+	struct cppi_descriptor	*bd, *tail;
+	unsigned		n_bds;
+	unsigned		i;
+	void __iomem		*tibase = musb->ctrl_base;
+	int			is_rndis = 0;
+	struct cppi_rx_stateram	__iomem *rx_ram = rx->state_ram;
+
+	if (onepacket) {
+		/* almost every USB driver, host or peripheral side */
+		n_bds = 1;
+
+		/* maybe apply the heuristic above */
+		if (cppi_rx_rndis
+				&& is_peripheral_active(musb)
+				&& length > maxpacket
+				&& (length & ~0xffff) == 0
+				&& (length & 0x0fff) != 0
+				&& (length & (maxpacket - 1)) == 0) {
+			maxpacket = length;
+			is_rndis = 1;
+		}
+	} else {
+		/* virtually nothing except mass storage class */
+		if (length > 0xffff) {
+			n_bds = 0xffff / maxpacket;
+			length = n_bds * maxpacket;
+		} else {
+			n_bds = length / maxpacket;
+			if (length % maxpacket)
+				n_bds++;
+		}
+		if (n_bds == 1)
+			onepacket = 1;
+		else
+			n_bds = min(n_bds, (unsigned) NUM_RXCHAN_BD);
+	}
+
+	/* In host mode, autorequest logic can generate some IN tokens; it's
+	 * tricky since we can't leave REQPKT set in RXCSR after the transfer
+	 * finishes. So:  multipacket transfers involve two or more segments.
+	 * And always at least two IRQs ... RNDIS mode is not an option.
+	 */
+	if (is_host_active(musb))
+		n_bds = cppi_autoreq_update(rx, tibase, onepacket, n_bds);
+
+	cppi_rndis_update(rx, 1, musb->ctrl_base, is_rndis);
+
+	length = min(n_bds * maxpacket, length);
+
+	DBG(4, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) "
+			"dma 0x%x len %u %u/%u\n",
+			rx->index, maxpacket,
+			onepacket
+				? (is_rndis ? "rndis" : "onepacket")
+				: "multipacket",
+			n_bds,
+			musb_readl(tibase,
+				DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+					& 0xffff,
+			addr, length, rx->channel.actual_len, rx->buf_len);
+
+	/* only queue one segment at a time, since the hardware prevents
+	 * correct queue shutdown after unexpected short packets
+	 */
+	bd = cppi_bd_alloc(rx);
+	rx->head = bd;
+
+	/* Build BDs for all packets in this segment */
+	for (i = 0, tail = NULL; bd && i < n_bds; i++, tail = bd) {
+		u32	bd_len;
+
+		if (i) {
+			bd = cppi_bd_alloc(rx);
+			if (!bd)
+				break;
+			tail->next = bd;
+			tail->hw_next = bd->dma;
+		}
+		bd->hw_next = 0;
+
+		/* all but the last packet will be maxpacket size */
+		if (maxpacket < length)
+			bd_len = maxpacket;
+		else
+			bd_len = length;
+
+		bd->hw_bufp = addr;
+		addr += bd_len;
+		rx->offset += bd_len;
+
+		bd->hw_off_len = (0 /*offset*/ << 16) + bd_len;
+		bd->buflen = bd_len;
+
+		bd->hw_options = CPPI_OWN_SET | (i == 0 ? length : 0);
+		length -= bd_len;
+	}
+
+	/* we always expect at least one reusable BD! */
+	if (!tail) {
+		WARNING("rx dma%d -- no BDs? need %d\n", rx->index, n_bds);
+		return;
+	} else if (i < n_bds)
+		WARNING("rx dma%d -- only %d of %d BDs\n", rx->index, i, n_bds);
+
+	tail->next = NULL;
+	tail->hw_next = 0;
+
+	bd = rx->head;
+	rx->tail = tail;
+
+	/* short reads and other faults should terminate this entire
+	 * dma segment.  we want one "dma packet" per dma segment, not
+	 * one per USB packet, terminating the whole queue at once...
+	 * NOTE that current hardware seems to ignore SOP and EOP.
+	 */
+	bd->hw_options |= CPPI_SOP_SET;
+	tail->hw_options |= CPPI_EOP_SET;
+
+	if (debug >= 5) {
+		struct cppi_descriptor	*d;
+
+		for (d = rx->head; d; d = d->next)
+			cppi_dump_rxbd("S", d);
+	}
+
+	/* in case the preceding transfer left some state... */
+	tail = rx->last_processed;
+	if (tail) {
+		tail->next = bd;
+		tail->hw_next = bd->dma;
+	}
+
+	core_rxirq_enable(tibase, rx->index + 1);
+
+	/* BDs live in DMA-coherent memory, but writes might be pending */
+	cpu_drain_writebuffer();
+
+	/* REVISIT specs say to write this AFTER the BUFCNT register
+	 * below ... but that loses badly.
+	 */
+	musb_writel(&rx_ram->rx_head, 0, bd->dma);
+
+	/* bufferCount must be at least 3, and zeroes on completion
+	 * unless it underflows below zero, or stops at two, or keeps
+	 * growing ... grr.
+	 */
+	i = musb_readl(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+			& 0xffff;
+
+	if (!i)
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds + 2);
+	else if (n_bds > (i - 3))
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds - (i - 3));
+
+	i = musb_readl(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
+			& 0xffff;
+	if (i < (2 + n_bds)) {
+		DBG(2, "bufcnt%d underrun - %d (for %d)\n",
+					rx->index, i, n_bds);
+		musb_writel(tibase,
+			DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4),
+			n_bds + 2);
+	}
+
+	cppi_dump_rx(4, rx, "/S");
+}
+
+/**
+ * cppi_channel_program - program channel for data transfer
+ * @ch: the channel
+ * @maxpacket: max packet size
+ * @mode: For RX, 1 unless the usb protocol driver promised to treat
+ *	all short reads as errors and kick in high level fault recovery.
+ *	For TX, ignored because of RNDIS mode races/glitches.
+ * @dma_addr: dma address of buffer
+ * @len: length of buffer
+ * Context: controller irqlocked
+ */
+static int cppi_channel_program(struct dma_channel *ch,
+		u16 maxpacket, u8 mode,
+		dma_addr_t dma_addr, u32 len)
+{
+	struct cppi_channel	*cppi_ch;
+	struct cppi		*controller;
+	struct musb		*musb;
+
+	cppi_ch = container_of(ch, struct cppi_channel, channel);
+	controller = cppi_ch->controller;
+	musb = controller->musb;
+
+	switch (ch->status) {
+	case MUSB_DMA_STATUS_BUS_ABORT:
+	case MUSB_DMA_STATUS_CORE_ABORT:
+		/* fault irq handler should have handled cleanup */
+		WARNING("%cX DMA%d not cleaned up after abort!\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* WARN_ON(1); */
+		break;
+	case MUSB_DMA_STATUS_BUSY:
+		WARNING("program active channel?  %cX DMA%d\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* WARN_ON(1); */
+		break;
+	case MUSB_DMA_STATUS_UNKNOWN:
+		DBG(1, "%cX DMA%d not allocated!\n",
+				cppi_ch->transmit ? 'T' : 'R',
+				cppi_ch->index);
+		/* FALLTHROUGH */
+	case MUSB_DMA_STATUS_FREE:
+		break;
+	}
+
+	ch->status = MUSB_DMA_STATUS_BUSY;
+
+	/* set transfer parameters, then queue up its first segment */
+	cppi_ch->buf_dma = dma_addr;
+	cppi_ch->offset = 0;
+	cppi_ch->maxpacket = maxpacket;
+	cppi_ch->buf_len = len;
+
+	/* TX channel? or RX? */
+	if (cppi_ch->transmit)
+		cppi_next_tx_segment(musb, cppi_ch);
+	else
+		cppi_next_rx_segment(musb, cppi_ch, mode);
+
+	return true;
+}
+
+static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
+{
+	struct cppi_channel		*rx = &cppi->rx[ch];
+	struct cppi_rx_stateram __iomem	*state = rx->state_ram;
+	struct cppi_descriptor		*bd;
+	struct cppi_descriptor		*last = rx->last_processed;
+	bool				completed = false;
+	bool				acked = false;
+	int				i;
+	dma_addr_t			safe2ack;
+	void __iomem			*regs = rx->hw_ep->regs;
+
+	cppi_dump_rx(6, rx, "/K");
+
+	bd = last ? last->next : rx->head;
+	if (!bd)
+		return false;
+
+	/* run through all completed BDs */
+	for (i = 0, safe2ack = musb_readl(&state->rx_complete, 0);
+			(safe2ack || completed) && bd && i < NUM_RXCHAN_BD;
+			i++, bd = bd->next) {
+		u16	len;
+
+		/* catch latest BD writes from CPPI */
+		rmb();
+		if (!completed && (bd->hw_options & CPPI_OWN_SET))
+			break;
+
+		DBG(5, "C/RXBD %08x: nxt %08x buf %08x "
+			"off.len %08x opt.len %08x (%d)\n",
+			bd->dma, bd->hw_next, bd->hw_bufp,
+			bd->hw_off_len, bd->hw_options,
+			rx->channel.actual_len);
+
+		/* actual packet received length */
+		if ((bd->hw_options & CPPI_SOP_SET) && !completed)
+			len = bd->hw_off_len & CPPI_RECV_PKTLEN_MASK;
+		else
+			len = 0;
+
+		if (bd->hw_options & CPPI_EOQ_MASK)
+			completed = true;
+
+		if (!completed && len < bd->buflen) {
+			/* NOTE:  when we get a short packet, RXCSR_H_REQPKT
+			 * must have been cleared, and no more DMA packets may
+			 * active be in the queue... TI docs didn't say, but
+			 * CPPI ignores those BDs even though OWN is still set.
+			 */
+			completed = true;
+			DBG(3, "rx short %d/%d (%d)\n",
+					len, bd->buflen,
+					rx->channel.actual_len);
+		}
+
+		/* If we got here, we expect to ack at least one BD; meanwhile
+		 * CPPI may completing other BDs while we scan this list...
+		 *
+		 * RACE: we can notice OWN cleared before CPPI raises the
+		 * matching irq by writing that BD as the completion pointer.
+		 * In such cases, stop scanning and wait for the irq, avoiding
+		 * lost acks and states where BD ownership is unclear.
+		 */
+		if (bd->dma == safe2ack) {
+			musb_writel(&state->rx_complete, 0, safe2ack);
+			safe2ack = musb_readl(&state->rx_complete, 0);
+			acked = true;
+			if (bd->dma == safe2ack)
+				safe2ack = 0;
+		}
+
+		rx->channel.actual_len += len;
+
+		cppi_bd_free(rx, last);
+		last = bd;
+
+		/* stop scanning on end-of-segment */
+		if (bd->hw_next == 0)
+			completed = true;
+	}
+	rx->last_processed = last;
+
+	/* dma abort, lost ack, or ... */
+	if (!acked && last) {
+		int	csr;
+
+		if (safe2ack == 0 || safe2ack == rx->last_processed->dma)
+			musb_writel(&state->rx_complete, 0, safe2ack);
+		if (safe2ack == 0) {
+			cppi_bd_free(rx, last);
+			rx->last_processed = NULL;
+
+			/* if we land here on the host side, H_REQPKT will
+			 * be clear and we need to restart the queue...
+			 */
+			WARN_ON(rx->head);
+		}
+		musb_ep_select(cppi->mregs, rx->index + 1);
+		csr = musb_readw(regs, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_DMAENAB) {
+			DBG(4, "list%d %p/%p, last %08x%s, csr %04x\n",
+				rx->index,
+				rx->head, rx->tail,
+				rx->last_processed
+					? rx->last_processed->dma
+					: 0,
+				completed ? ", completed" : "",
+				csr);
+			cppi_dump_rxq(4, "/what?", rx);
+		}
+	}
+	if (!completed) {
+		int	csr;
+
+		rx->head = bd;
+
+		/* REVISIT seems like "autoreq all but EOP" doesn't...
+		 * setting it here "should" be racey, but seems to work
+		 */
+		csr = musb_readw(rx->hw_ep->regs, MUSB_RXCSR);
+		if (is_host_active(cppi->musb)
+				&& bd
+				&& !(csr & MUSB_RXCSR_H_REQPKT)) {
+			csr |= MUSB_RXCSR_H_REQPKT;
+			musb_writew(regs, MUSB_RXCSR,
+					MUSB_RXCSR_H_WZC_BITS | csr);
+			csr = musb_readw(rx->hw_ep->regs, MUSB_RXCSR);
+		}
+	} else {
+		rx->head = NULL;
+		rx->tail = NULL;
+	}
+
+	cppi_dump_rx(6, rx, completed ? "/completed" : "/cleaned");
+	return completed;
+}
+
+void cppi_completion(struct musb *musb, u32 rx, u32 tx)
+{
+	void __iomem		*tibase;
+	int			i, index;
+	struct cppi		*cppi;
+	struct musb_hw_ep	*hw_ep = NULL;
+
+	cppi = container_of(musb->dma_controller, struct cppi, controller);
+
+	tibase = musb->ctrl_base;
+
+	/* process TX channels */
+	for (index = 0; tx; tx = tx >> 1, index++) {
+		struct cppi_channel		*tx_ch;
+		struct cppi_tx_stateram __iomem	*tx_ram;
+		bool				completed = false;
+		struct cppi_descriptor		*bd;
+
+		if (!(tx & 1))
+			continue;
+
+		tx_ch = cppi->tx + index;
+		tx_ram = tx_ch->state_ram;
+
+		/* FIXME  need a cppi_tx_scan() routine, which
+		 * can also be called from abort code
+		 */
+
+		cppi_dump_tx(5, tx_ch, "/E");
+
+		bd = tx_ch->head;
+
+		if (NULL == bd) {
+			DBG(1, "null BD\n");
+			continue;
+		}
+
+		/* run through all completed BDs */
+		for (i = 0; !completed && bd && i < NUM_TXCHAN_BD;
+				i++, bd = bd->next) {
+			u16	len;
+
+			/* catch latest BD writes from CPPI */
+			rmb();
+			if (bd->hw_options & CPPI_OWN_SET)
+				break;
+
+			DBG(5, "C/TXBD %p n %x b %x off %x opt %x\n",
+					bd, bd->hw_next, bd->hw_bufp,
+					bd->hw_off_len, bd->hw_options);
+
+			len = bd->hw_off_len & CPPI_BUFFER_LEN_MASK;
+			tx_ch->channel.actual_len += len;
+
+			tx_ch->last_processed = bd;
+
+			/* write completion register to acknowledge
+			 * processing of completed BDs, and possibly
+			 * release the IRQ; EOQ might not be set ...
+			 *
+			 * REVISIT use the same ack strategy as rx
+			 *
+			 * REVISIT have observed bit 18 set; huh??
+			 */
+			/* if ((bd->hw_options & CPPI_EOQ_MASK)) */
+				musb_writel(&tx_ram->tx_complete, 0, bd->dma);
+
+			/* stop scanning on end-of-segment */
+			if (bd->hw_next == 0)
+				completed = true;
+		}
+
+		/* on end of segment, maybe go to next one */
+		if (completed) {
+			/* cppi_dump_tx(4, tx_ch, "/complete"); */
+
+			/* transfer more, or report completion */
+			if (tx_ch->offset >= tx_ch->buf_len) {
+				tx_ch->head = NULL;
+				tx_ch->tail = NULL;
+				tx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+				hw_ep = tx_ch->hw_ep;
+
+				/* Peripheral role never repurposes the
+				 * endpoint, so immediate completion is
+				 * safe.  Host role waits for the fifo
+				 * to empty (TXPKTRDY irq) before going
+				 * to the next queued bulk transfer.
+				 */
+				if (is_host_active(cppi->musb)) {
+#if 0
+					/* WORKAROUND because we may
+					 * not always get TXKPTRDY ...
+					 */
+					int	csr;
+
+					csr = musb_readw(hw_ep->regs,
+						MUSB_TXCSR);
+					if (csr & MUSB_TXCSR_TXPKTRDY)
+#endif
+						completed = false;
+				}
+				if (completed)
+					musb_dma_completion(musb, index + 1, 1);
+
+			} else {
+				/* Bigger transfer than we could fit in
+				 * that first batch of descriptors...
+				 */
+				cppi_next_tx_segment(musb, tx_ch);
+			}
+		} else
+			tx_ch->head = bd;
+	}
+
+	/* Start processing the RX block */
+	for (index = 0; rx; rx = rx >> 1, index++) {
+
+		if (rx & 1) {
+			struct cppi_channel		*rx_ch;
+
+			rx_ch = cppi->rx + index;
+
+			/* let incomplete dma segments finish */
+			if (!cppi_rx_scan(cppi, index))
+				continue;
+
+			/* start another dma segment if needed */
+			if (rx_ch->channel.actual_len != rx_ch->buf_len
+					&& rx_ch->channel.actual_len
+						== rx_ch->offset) {
+				cppi_next_rx_segment(musb, rx_ch, 1);
+				continue;
+			}
+
+			/* all segments completed! */
+			rx_ch->channel.status = MUSB_DMA_STATUS_FREE;
+
+			hw_ep = rx_ch->hw_ep;
+
+			core_rxirq_disable(tibase, index + 1);
+			musb_dma_completion(musb, index + 1, 0);
+		}
+	}
+
+	/* write to CPPI EOI register to re-enable interrupts */
+	musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0);
+}
+
+/* Instantiate a software object representing a DMA controller. */
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *mregs)
+{
+	struct cppi		*controller;
+
+	controller = kzalloc(sizeof *controller, GFP_KERNEL);
+	if (!controller)
+		return NULL;
+
+	controller->mregs = mregs;
+	controller->tibase = mregs - DAVINCI_BASE_OFFSET;
+
+	controller->musb = musb;
+	controller->controller.start = cppi_controller_start;
+	controller->controller.stop = cppi_controller_stop;
+	controller->controller.channel_alloc = cppi_channel_allocate;
+	controller->controller.channel_release = cppi_channel_release;
+	controller->controller.channel_program = cppi_channel_program;
+	controller->controller.channel_abort = cppi_channel_abort;
+
+	/* NOTE: allocating from on-chip SRAM would give the least
+	 * contention for memory access, if that ever matters here.
+	 */
+
+	/* setup BufferPool */
+	controller->pool = dma_pool_create("cppi",
+			controller->musb->controller,
+			sizeof(struct cppi_descriptor),
+			CPPI_DESCRIPTOR_ALIGN, 0);
+	if (!controller->pool) {
+		kfree(controller);
+		return NULL;
+	}
+
+	return &controller->controller;
+}
+
+/*
+ *  Destroy a previously-instantiated DMA controller.
+ */
+void dma_controller_destroy(struct dma_controller *c)
+{
+	struct cppi	*cppi;
+
+	cppi = container_of(c, struct cppi, controller);
+
+	/* assert:  caller stopped the controller first */
+	dma_pool_destroy(cppi->pool);
+
+	kfree(cppi);
+}
+
+/*
+ * Context: controller irqlocked, endpoint selected
+ */
+static int cppi_channel_abort(struct dma_channel *channel)
+{
+	struct cppi_channel	*cppi_ch;
+	struct cppi		*controller;
+	void __iomem		*mbase;
+	void __iomem		*tibase;
+	void __iomem		*regs;
+	u32			value;
+	struct cppi_descriptor	*queue;
+
+	cppi_ch = container_of(channel, struct cppi_channel, channel);
+
+	controller = cppi_ch->controller;
+
+	switch (channel->status) {
+	case MUSB_DMA_STATUS_BUS_ABORT:
+	case MUSB_DMA_STATUS_CORE_ABORT:
+		/* from RX or TX fault irq handler */
+	case MUSB_DMA_STATUS_BUSY:
+		/* the hardware needs shutting down */
+		regs = cppi_ch->hw_ep->regs;
+		break;
+	case MUSB_DMA_STATUS_UNKNOWN:
+	case MUSB_DMA_STATUS_FREE:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+
+	if (!cppi_ch->transmit && cppi_ch->head)
+		cppi_dump_rxq(3, "/abort", cppi_ch);
+
+	mbase = controller->mregs;
+	tibase = controller->tibase;
+
+	queue = cppi_ch->head;
+	cppi_ch->head = NULL;
+	cppi_ch->tail = NULL;
+
+	/* REVISIT should rely on caller having done this,
+	 * and caller should rely on us not changing it.
+	 * peripheral code is safe ... check host too.
+	 */
+	musb_ep_select(mbase, cppi_ch->index + 1);
+
+	if (cppi_ch->transmit) {
+		struct cppi_tx_stateram __iomem *tx_ram;
+		int			enabled;
+
+		/* mask interrupts raised to signal teardown complete.  */
+		enabled = musb_readl(tibase, DAVINCI_TXCPPI_INTENAB_REG)
+				& (1 << cppi_ch->index);
+		if (enabled)
+			musb_writel(tibase, DAVINCI_TXCPPI_INTCLR_REG,
+					(1 << cppi_ch->index));
+
+		/* REVISIT put timeouts on these controller handshakes */
+
+		cppi_dump_tx(6, cppi_ch, " (teardown)");
+
+		/* teardown DMA engine then usb core */
+		do {
+			value = musb_readl(tibase, DAVINCI_TXCPPI_TEAR_REG);
+		} while (!(value & CPPI_TEAR_READY));
+		musb_writel(tibase, DAVINCI_TXCPPI_TEAR_REG, cppi_ch->index);
+
+		tx_ram = cppi_ch->state_ram;
+		do {
+			value = musb_readl(&tx_ram->tx_complete, 0);
+		} while (0xFFFFFFFC != value);
+		musb_writel(&tx_ram->tx_complete, 0, 0xFFFFFFFC);
+
+		/* FIXME clean up the transfer state ... here?
+		 * the completion routine should get called with
+		 * an appropriate status code.
+		 */
+
+		value = musb_readw(regs, MUSB_TXCSR);
+		value &= ~MUSB_TXCSR_DMAENAB;
+		value |= MUSB_TXCSR_FLUSHFIFO;
+		musb_writew(regs, MUSB_TXCSR, value);
+		musb_writew(regs, MUSB_TXCSR, value);
+
+		/* re-enable interrupt */
+		if (enabled)
+			musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+					(1 << cppi_ch->index));
+
+		/* While we scrub the TX state RAM, ensure that we clean
+		 * up any interrupt that's currently asserted:
+		 * 1. Write to completion Ptr value 0x1(bit 0 set)
+		 *    (write back mode)
+		 * 2. Write to completion Ptr value 0x0(bit 0 cleared)
+		 *    (compare mode)
+		 * Value written is compared(for bits 31:2) and when
+		 * equal, interrupt is deasserted.
+		 */
+		cppi_reset_tx(tx_ram, 1);
+		musb_writel(&tx_ram->tx_complete, 0, 0);
+
+		cppi_dump_tx(5, cppi_ch, " (done teardown)");
+
+		/* REVISIT tx side _should_ clean up the same way
+		 * as the RX side ... this does no cleanup at all!
+		 */
+
+	} else /* RX */ {
+		u16			csr;
+
+		/* NOTE: docs don't guarantee any of this works ...  we
+		 * expect that if the usb core stops telling the cppi core
+		 * to pull more data from it, then it'll be safe to flush
+		 * current RX DMA state iff any pending fifo transfer is done.
+		 */
+
+		core_rxirq_disable(tibase, cppi_ch->index + 1);
+
+		/* for host, ensure ReqPkt is never set again */
+		if (is_host_active(cppi_ch->controller->musb)) {
+			value = musb_readl(tibase, DAVINCI_AUTOREQ_REG);
+			value &= ~((0x3) << (cppi_ch->index * 2));
+			musb_writel(tibase, DAVINCI_AUTOREQ_REG, value);
+		}
+
+		csr = musb_readw(regs, MUSB_RXCSR);
+
+		/* for host, clear (just) ReqPkt at end of current packet(s) */
+		if (is_host_active(cppi_ch->controller->musb)) {
+			csr |= MUSB_RXCSR_H_WZC_BITS;
+			csr &= ~MUSB_RXCSR_H_REQPKT;
+		} else
+			csr |= MUSB_RXCSR_P_WZC_BITS;
+
+		/* clear dma enable */
+		csr &= ~(MUSB_RXCSR_DMAENAB);
+		musb_writew(regs, MUSB_RXCSR, csr);
+		csr = musb_readw(regs, MUSB_RXCSR);
+
+		/* Quiesce: wait for current dma to finish (if not cleanup).
+		 * We can't use bit zero of stateram->rx_sop, since that
+		 * refers to an entire "DMA packet" not just emptying the
+		 * current fifo.  Most segments need multiple usb packets.
+		 */
+		if (channel->status == MUSB_DMA_STATUS_BUSY)
+			udelay(50);
+
+		/* scan the current list, reporting any data that was
+		 * transferred and acking any IRQ
+		 */
+		cppi_rx_scan(controller, cppi_ch->index);
+
+		/* clobber the existing state once it's idle
+		 *
+		 * NOTE:  arguably, we should also wait for all the other
+		 * RX channels to quiesce (how??) and then temporarily
+		 * disable RXCPPI_CTRL_REG ... but it seems that we can
+		 * rely on the controller restarting from state ram, with
+		 * only RXCPPI_BUFCNT state being bogus.  BUFCNT will
+		 * correct itself after the next DMA transfer though.
+		 *
+		 * REVISIT does using rndis mode change that?
+		 */
+		cppi_reset_rx(cppi_ch->state_ram);
+
+		/* next DMA request _should_ load cppi head ptr */
+
+		/* ... we don't "free" that list, only mutate it in place.  */
+		cppi_dump_rx(5, cppi_ch, " (done abort)");
+
+		/* clean up previously pending bds */
+		cppi_bd_free(cppi_ch, cppi_ch->last_processed);
+		cppi_ch->last_processed = NULL;
+
+		while (queue) {
+			struct cppi_descriptor	*tmp = queue->next;
+
+			cppi_bd_free(cppi_ch, queue);
+			queue = tmp;
+		}
+	}
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+	cppi_ch->buf_dma = 0;
+	cppi_ch->offset = 0;
+	cppi_ch->buf_len = 0;
+	cppi_ch->maxpacket = 0;
+	return 0;
+}
+
+/* TBD Queries:
+ *
+ * Power Management ... probably turn off cppi during suspend, restart;
+ * check state ram?  Clocking is presumably shared with usb core.
+ */
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
new file mode 100644
index 00000000000..fc5216b5d2c
--- /dev/null
+++ b/drivers/usb/musb/cppi_dma.h
@@ -0,0 +1,133 @@
+/* Copyright (C) 2005-2006 by Texas Instruments */
+
+#ifndef _CPPI_DMA_H_
+#define _CPPI_DMA_H_
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/dmapool.h>
+
+#include "musb_dma.h"
+#include "musb_core.h"
+
+
+/* FIXME fully isolate CPPI from DaVinci ... the "CPPI generic" registers
+ * would seem to be shared with the TUSB6020 (over VLYNQ).
+ */
+
+#include "davinci.h"
+
+
+/* CPPI RX/TX state RAM */
+
+struct cppi_tx_stateram {
+	u32 tx_head;			/* "DMA packet" head descriptor */
+	u32 tx_buf;
+	u32 tx_current;			/* current descriptor */
+	u32 tx_buf_current;
+	u32 tx_info;			/* flags, remaining buflen */
+	u32 tx_rem_len;
+	u32 tx_dummy;			/* unused */
+	u32 tx_complete;
+};
+
+struct cppi_rx_stateram {
+	u32 rx_skipbytes;
+	u32 rx_head;
+	u32 rx_sop;			/* "DMA packet" head descriptor */
+	u32 rx_current;			/* current descriptor */
+	u32 rx_buf_current;
+	u32 rx_len_len;
+	u32 rx_cnt_cnt;
+	u32 rx_complete;
+};
+
+/* hw_options bits in CPPI buffer descriptors */
+#define CPPI_SOP_SET	((u32)(1 << 31))
+#define CPPI_EOP_SET	((u32)(1 << 30))
+#define CPPI_OWN_SET	((u32)(1 << 29))	/* owned by cppi */
+#define CPPI_EOQ_MASK	((u32)(1 << 28))
+#define CPPI_ZERO_SET	((u32)(1 << 23))	/* rx saw zlp; tx issues one */
+#define CPPI_RXABT_MASK	((u32)(1 << 19))	/* need more rx buffers */
+
+#define CPPI_RECV_PKTLEN_MASK 0xFFFF
+#define CPPI_BUFFER_LEN_MASK 0xFFFF
+
+#define CPPI_TEAR_READY ((u32)(1 << 31))
+
+/* CPPI data structure definitions */
+
+#define	CPPI_DESCRIPTOR_ALIGN	16	/* bytes; 5-dec docs say 4-byte align */
+
+struct cppi_descriptor {
+	/* hardware overlay */
+	u32		hw_next;	/* next buffer descriptor Pointer */
+	u32		hw_bufp;	/* i/o buffer pointer */
+	u32		hw_off_len;	/* buffer_offset16, buffer_length16 */
+	u32		hw_options;	/* flags:  SOP, EOP etc*/
+
+	struct cppi_descriptor *next;
+	dma_addr_t	dma;		/* address of this descriptor */
+	u32		buflen;		/* for RX: original buffer length */
+} __attribute__ ((aligned(CPPI_DESCRIPTOR_ALIGN)));
+
+
+struct cppi;
+
+/* CPPI  Channel Control structure */
+struct cppi_channel {
+	struct dma_channel	channel;
+
+	/* back pointer to the DMA controller structure */
+	struct cppi		*controller;
+
+	/* which direction of which endpoint? */
+	struct musb_hw_ep	*hw_ep;
+	bool			transmit;
+	u8			index;
+
+	/* DMA modes:  RNDIS or "transparent" */
+	u8			is_rndis;
+
+	/* book keeping for current transfer request */
+	dma_addr_t		buf_dma;
+	u32			buf_len;
+	u32			maxpacket;
+	u32			offset;		/* dma requested */
+
+	void __iomem		*state_ram;	/* CPPI state */
+
+	struct cppi_descriptor	*freelist;
+
+	/* BD management fields */
+	struct cppi_descriptor	*head;
+	struct cppi_descriptor	*tail;
+	struct cppi_descriptor	*last_processed;
+
+	/* use tx_complete in host role to track endpoints waiting for
+	 * FIFONOTEMPTY to clear.
+	 */
+	struct list_head	tx_complete;
+};
+
+/* CPPI DMA controller object */
+struct cppi {
+	struct dma_controller		controller;
+	struct musb			*musb;
+	void __iomem			*mregs;		/* Mentor regs */
+	void __iomem			*tibase;	/* TI/CPPI regs */
+
+	struct cppi_channel		tx[MUSB_C_NUM_EPT - 1];
+	struct cppi_channel		rx[MUSB_C_NUM_EPR - 1];
+
+	struct dma_pool			*pool;
+
+	struct list_head		tx_complete;
+};
+
+/* irq handling hook */
+extern void cppi_completion(struct musb *, u32 rx, u32 tx);
+
+#endif				/* end of ifndef _CPPI_DMA_H_ */
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
new file mode 100644
index 00000000000..75baf181a8c
--- /dev/null
+++ b/drivers/usb/musb/davinci.c
@@ -0,0 +1,462 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/memory.h>
+#include <asm/arch/gpio.h>
+#include <asm/mach-types.h>
+
+#include "musb_core.h"
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+#include <asm/arch/i2c-client.h>
+#endif
+
+#include "davinci.h"
+#include "cppi_dma.h"
+
+
+/* REVISIT (PM) we should be able to keep the PHY in low power mode most
+ * of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
+ * and, when in host mode, autosuspending idle root ports... PHYPLLON
+ * (overriding SUSPENDM?) then likely needs to stay off.
+ */
+
+static inline void phy_on(void)
+{
+	/* start the on-chip PHY and its PLL */
+	__raw_writel(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON,
+			(void __force __iomem *) IO_ADDRESS(USBPHY_CTL_PADDR));
+	while ((__raw_readl((void __force __iomem *)
+				IO_ADDRESS(USBPHY_CTL_PADDR))
+			& USBPHY_PHYCLKGD) == 0)
+		cpu_relax();
+}
+
+static inline void phy_off(void)
+{
+	/* powerdown the on-chip PHY and its oscillator */
+	__raw_writel(USBPHY_OSCPDWN | USBPHY_PHYPDWN, (void __force __iomem *)
+			IO_ADDRESS(USBPHY_CTL_PADDR));
+}
+
+static int dma_off = 1;
+
+void musb_platform_enable(struct musb *musb)
+{
+	u32	tmp, old, val;
+
+	/* workaround:  setup irqs through both register sets */
+	tmp = (musb->epmask & DAVINCI_USB_TX_ENDPTS_MASK)
+			<< DAVINCI_USB_TXINT_SHIFT;
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+	old = tmp;
+	tmp = (musb->epmask & (0xfffe & DAVINCI_USB_RX_ENDPTS_MASK))
+			<< DAVINCI_USB_RXINT_SHIFT;
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+	tmp |= old;
+
+	val = ~MUSB_INTR_SOF;
+	tmp |= ((val & 0x01ff) << DAVINCI_USB_USBINT_SHIFT);
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_SET_REG, tmp);
+
+	if (is_dma_capable() && !dma_off)
+		printk(KERN_WARNING "%s %s: dma not reactivated\n",
+				__FILE__, __func__);
+	else
+		dma_off = 0;
+
+	/* force a DRVVBUS irq so we can start polling for ID change */
+	if (is_otg_enabled(musb))
+		musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+			DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT);
+}
+
+/*
+ * Disable the HDRC and flush interrupts
+ */
+void musb_platform_disable(struct musb *musb)
+{
+	/* because we don't set CTRLR.UINT, "important" to:
+	 *  - not read/write INTRUSB/INTRUSBE
+	 *  - (except during initial setup, as workaround)
+	 *  - use INTSETR/INTCLRR instead
+	 */
+	musb_writel(musb->ctrl_base, DAVINCI_USB_INT_MASK_CLR_REG,
+			  DAVINCI_USB_USBINT_MASK
+			| DAVINCI_USB_TXINT_MASK
+			| DAVINCI_USB_RXINT_MASK);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_writel(musb->ctrl_base, DAVINCI_USB_EOI_REG, 0);
+
+	if (is_dma_capable() && !dma_off)
+		WARNING("dma still active\n");
+}
+
+
+/* REVISIT it's not clear whether DaVinci can support full OTG.  */
+
+static int vbus_state = -1;
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+#define	portstate(stmt)		stmt
+#else
+#define	portstate(stmt)
+#endif
+
+
+/* VBUS SWITCHING IS BOARD-SPECIFIC */
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+#ifndef CONFIG_MACH_DAVINCI_EVM_OTG
+
+/* I2C operations are always synchronous, and require a task context.
+ * With unloaded systems, using the shared workqueue seems to suffice
+ * to satisfy the 100msec A_WAIT_VRISE timeout...
+ */
+static void evm_deferred_drvvbus(struct work_struct *ignored)
+{
+	davinci_i2c_expander_op(0x3a, USB_DRVVBUS, vbus_state);
+	vbus_state = !vbus_state;
+}
+static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus);
+
+#endif	/* modified board */
+#endif	/* EVM */
+
+static void davinci_source_power(struct musb *musb, int is_on, int immediate)
+{
+	if (is_on)
+		is_on = 1;
+
+	if (vbus_state == is_on)
+		return;
+	vbus_state = !is_on;		/* 0/1 vs "-1 == unknown/init" */
+
+#ifdef CONFIG_MACH_DAVINCI_EVM
+	if (machine_is_davinci_evm()) {
+#ifdef CONFIG_MACH_DAVINCI_EVM_OTG
+		/* modified EVM board switching VBUS with GPIO(6) not I2C
+		 * NOTE:  PINMUX0.RGB888 (bit23) must be clear
+		 */
+		if (is_on)
+			gpio_set(GPIO(6));
+		else
+			gpio_clear(GPIO(6));
+		immediate = 1;
+#else
+		if (immediate)
+			davinci_i2c_expander_op(0x3a, USB_DRVVBUS, !is_on);
+		else
+			schedule_work(&evm_vbus_work);
+#endif
+	}
+#endif
+	if (immediate)
+		vbus_state = is_on;
+}
+
+static void davinci_set_vbus(struct musb *musb, int is_on)
+{
+	WARN_ON(is_on && is_peripheral_active(musb));
+	davinci_source_power(musb, is_on, 0);
+}
+
+
+#define	POLL_SECONDS	2
+
+static struct timer_list otg_workaround;
+
+static void otg_timer(unsigned long _musb)
+{
+	struct musb		*musb = (void *)_musb;
+	void __iomem		*mregs = musb->mregs;
+	u8			devctl;
+	unsigned long		flags;
+
+	/* We poll because DaVinci's won't expose several OTG-critical
+	* status change events (from the transceiver) otherwise.
+	 */
+	devctl = musb_readb(mregs, MUSB_DEVCTL);
+	DBG(7, "poll devctl %02x (%s)\n", devctl, otg_state_string(musb));
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_WAIT_VFALL:
+		/* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL
+		 * seems to mis-handle session "start" otherwise (or in our
+		 * case "recover"), in routine "VBUS was valid by the time
+		 * VBUSERR got reported during enumeration" cases.
+		 */
+		if (devctl & MUSB_DEVCTL_VBUS) {
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			break;
+		}
+		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
+			MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT);
+		break;
+	case OTG_STATE_B_IDLE:
+		if (!is_peripheral_enabled(musb))
+			break;
+
+		/* There's no ID-changed IRQ, so we have no good way to tell
+		 * when to switch to the A-Default state machine (by setting
+		 * the DEVCTL.SESSION flag).
+		 *
+		 * Workaround:  whenever we're in B_IDLE, try setting the
+		 * session flag every few seconds.  If it works, ID was
+		 * grounded and we're now in the A-Default state machine.
+		 *
+		 * NOTE setting the session flag is _supposed_ to trigger
+		 * SRP, but clearly it doesn't.
+		 */
+		musb_writeb(mregs, MUSB_DEVCTL,
+				devctl | MUSB_DEVCTL_SESSION);
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE)
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+		else
+			musb->xceiv.state = OTG_STATE_A_IDLE;
+		break;
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static irqreturn_t davinci_interrupt(int irq, void *__hci)
+{
+	unsigned long	flags;
+	irqreturn_t	retval = IRQ_NONE;
+	struct musb	*musb = __hci;
+	void __iomem	*tibase = musb->ctrl_base;
+	u32		tmp;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* NOTE: DaVinci shadows the Mentor IRQs.  Don't manage them through
+	 * the Mentor registers (except for setup), use the TI ones and EOI.
+	 *
+	 * Docs describe irq "vector" registers asociated with the CPPI and
+	 * USB EOI registers.  These hold a bitmask corresponding to the
+	 * current IRQ, not an irq handler address.  Would using those bits
+	 * resolve some of the races observed in this dispatch code??
+	 */
+
+	/* CPPI interrupts share the same IRQ line, but have their own
+	 * mask, state, "vector", and EOI registers.
+	 */
+	if (is_cppi_enabled()) {
+		u32 cppi_tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
+		u32 cppi_rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
+
+		if (cppi_tx || cppi_rx) {
+			DBG(4, "CPPI IRQ t%x r%x\n", cppi_tx, cppi_rx);
+			cppi_completion(musb, cppi_rx, cppi_tx);
+			retval = IRQ_HANDLED;
+		}
+	}
+
+	/* ack and handle non-CPPI interrupts */
+	tmp = musb_readl(tibase, DAVINCI_USB_INT_SRC_MASKED_REG);
+	musb_writel(tibase, DAVINCI_USB_INT_SRC_CLR_REG, tmp);
+	DBG(4, "IRQ %08x\n", tmp);
+
+	musb->int_rx = (tmp & DAVINCI_USB_RXINT_MASK)
+			>> DAVINCI_USB_RXINT_SHIFT;
+	musb->int_tx = (tmp & DAVINCI_USB_TXINT_MASK)
+			>> DAVINCI_USB_TXINT_SHIFT;
+	musb->int_usb = (tmp & DAVINCI_USB_USBINT_MASK)
+			>> DAVINCI_USB_USBINT_SHIFT;
+
+	/* DRVVBUS irqs are the only proxy we have (a very poor one!) for
+	 * DaVinci's missing ID change IRQ.  We need an ID change IRQ to
+	 * switch appropriately between halves of the OTG state machine.
+	 * Managing DEVCTL.SESSION per Mentor docs requires we know its
+	 * value, but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
+	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
+	 */
+	if (tmp & (DAVINCI_INTR_DRVVBUS << DAVINCI_USB_USBINT_SHIFT)) {
+		int	drvvbus = musb_readl(tibase, DAVINCI_USB_STAT_REG);
+		void __iomem *mregs = musb->mregs;
+		u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
+		int	err = musb->int_usb & MUSB_INTR_VBUSERROR;
+
+		err = is_host_enabled(musb)
+				&& (musb->int_usb & MUSB_INTR_VBUSERROR);
+		if (err) {
+			/* The Mentor core doesn't debounce VBUS as needed
+			 * to cope with device connect current spikes. This
+			 * means it's not uncommon for bus-powered devices
+			 * to get VBUS errors during enumeration.
+			 *
+			 * This is a workaround, but newer RTL from Mentor
+			 * seems to allow a better one: "re"starting sessions
+			 * without waiting (on EVM, a **long** time) for VBUS
+			 * to stop registering in devctl.
+			 */
+			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+			musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+			mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+			WARNING("VBUS error workaround (delay coming)\n");
+		} else if (is_host_enabled(musb) && drvvbus) {
+			musb->is_active = 1;
+			MUSB_HST_MODE(musb);
+			musb->xceiv.default_a = 1;
+			musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+			portstate(musb->port1_status |= USB_PORT_STAT_POWER);
+			del_timer(&otg_workaround);
+		} else {
+			musb->is_active = 0;
+			MUSB_DEV_MODE(musb);
+			musb->xceiv.default_a = 0;
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+			portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
+		}
+
+		/* NOTE:  this must complete poweron within 100 msec */
+		davinci_source_power(musb, drvvbus, 0);
+		DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
+				drvvbus ? "on" : "off",
+				otg_state_string(musb),
+				err ? " ERROR" : "",
+				devctl);
+		retval = IRQ_HANDLED;
+	}
+
+	if (musb->int_tx || musb->int_rx || musb->int_usb)
+		retval |= musb_interrupt(musb);
+
+	/* irq stays asserted until EOI is written */
+	musb_writel(tibase, DAVINCI_USB_EOI_REG, 0);
+
+	/* poll for ID change */
+	if (is_otg_enabled(musb)
+			&& musb->xceiv.state == OTG_STATE_B_IDLE)
+		mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* REVISIT we sometimes get unhandled IRQs
+	 * (e.g. ep0).  not clear why...
+	 */
+	if (retval != IRQ_HANDLED)
+		DBG(5, "unhandled? %08x\n", tmp);
+	return IRQ_HANDLED;
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+	void __iomem	*tibase = musb->ctrl_base;
+	u32		revision;
+
+	musb->mregs += DAVINCI_BASE_OFFSET;
+#if 0
+	/* REVISIT there's something odd about clocking, this
+	 * didn't appear do the job ...
+	 */
+	musb->clock = clk_get(pDevice, "usb");
+	if (IS_ERR(musb->clock))
+		return PTR_ERR(musb->clock);
+
+	status = clk_enable(musb->clock);
+	if (status < 0)
+		return -ENODEV;
+#endif
+
+	/* returns zero if e.g. not clocked */
+	revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
+	if (revision == 0)
+		return -ENODEV;
+
+	if (is_host_enabled(musb))
+		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
+
+	musb->board_set_vbus = davinci_set_vbus;
+	davinci_source_power(musb, 0, 1);
+
+	/* reset the controller */
+	musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
+
+	/* start the on-chip PHY and its PLL */
+	phy_on();
+
+	msleep(5);
+
+	/* NOTE:  irqs are in mixed mode, not bypass to pure-musb */
+	pr_debug("DaVinci OTG revision %08x phy %03x control %02x\n",
+		revision, __raw_readl((void __force __iomem *)
+				IO_ADDRESS(USBPHY_CTL_PADDR)),
+		musb_readb(tibase, DAVINCI_USB_CTRL_REG));
+
+	musb->isr = davinci_interrupt;
+	return 0;
+}
+
+int musb_platform_exit(struct musb *musb)
+{
+	if (is_host_enabled(musb))
+		del_timer_sync(&otg_workaround);
+
+	davinci_source_power(musb, 0 /*off*/, 1);
+
+	/* delay, to avoid problems with module reload */
+	if (is_host_enabled(musb) && musb->xceiv.default_a) {
+		int	maxdelay = 30;
+		u8	devctl, warn = 0;
+
+		/* if there's no peripheral connected, this can take a
+		 * long time to fall, especially on EVM with huge C133.
+		 */
+		do {
+			devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+			if (!(devctl & MUSB_DEVCTL_VBUS))
+				break;
+			if ((devctl & MUSB_DEVCTL_VBUS) != warn) {
+				warn = devctl & MUSB_DEVCTL_VBUS;
+				DBG(1, "VBUS %d\n",
+					warn >> MUSB_DEVCTL_VBUS_SHIFT);
+			}
+			msleep(1000);
+			maxdelay--;
+		} while (maxdelay > 0);
+
+		/* in OTG mode, another host might be connected */
+		if (devctl & MUSB_DEVCTL_VBUS)
+			DBG(1, "VBUS off timeout (devctl %02x)\n", devctl);
+	}
+
+	phy_off();
+	return 0;
+}
diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h
new file mode 100644
index 00000000000..7fb6238e270
--- /dev/null
+++ b/drivers/usb/musb/davinci.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_HDRDF_H__
+#define __MUSB_HDRDF_H__
+
+/*
+ * DaVinci-specific definitions
+ */
+
+/* Integrated highspeed/otg PHY */
+#define	USBPHY_CTL_PADDR	(DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define	USBPHY_PHYCLKGD		(1 << 8)
+#define	USBPHY_SESNDEN		(1 << 7)	/* v(sess_end) comparator */
+#define	USBPHY_VBDTCTEN		(1 << 6)	/* v(bus) comparator */
+#define	USBPHY_PHYPLLON		(1 << 4)	/* override pll suspend */
+#define	USBPHY_CLKO1SEL		(1 << 3)
+#define	USBPHY_OSCPDWN		(1 << 2)
+#define	USBPHY_PHYPDWN		(1 << 0)
+
+/* For now include usb OTG module registers here */
+#define DAVINCI_USB_VERSION_REG		0x00
+#define DAVINCI_USB_CTRL_REG		0x04
+#define DAVINCI_USB_STAT_REG		0x08
+#define DAVINCI_RNDIS_REG		0x10
+#define DAVINCI_AUTOREQ_REG		0x14
+#define DAVINCI_USB_INT_SOURCE_REG	0x20
+#define DAVINCI_USB_INT_SET_REG		0x24
+#define DAVINCI_USB_INT_SRC_CLR_REG	0x28
+#define DAVINCI_USB_INT_MASK_REG	0x2c
+#define DAVINCI_USB_INT_MASK_SET_REG	0x30
+#define DAVINCI_USB_INT_MASK_CLR_REG	0x34
+#define DAVINCI_USB_INT_SRC_MASKED_REG	0x38
+#define DAVINCI_USB_EOI_REG		0x3c
+#define DAVINCI_USB_EOI_INTVEC		0x40
+
+/* BEGIN CPPI-generic (?) */
+
+/* CPPI related registers */
+#define DAVINCI_TXCPPI_CTRL_REG		0x80
+#define DAVINCI_TXCPPI_TEAR_REG		0x84
+#define DAVINCI_CPPI_EOI_REG		0x88
+#define DAVINCI_CPPI_INTVEC_REG		0x8c
+#define DAVINCI_TXCPPI_MASKED_REG	0x90
+#define DAVINCI_TXCPPI_RAW_REG		0x94
+#define DAVINCI_TXCPPI_INTENAB_REG	0x98
+#define DAVINCI_TXCPPI_INTCLR_REG	0x9c
+
+#define DAVINCI_RXCPPI_CTRL_REG		0xC0
+#define DAVINCI_RXCPPI_MASKED_REG	0xD0
+#define DAVINCI_RXCPPI_RAW_REG		0xD4
+#define DAVINCI_RXCPPI_INTENAB_REG	0xD8
+#define DAVINCI_RXCPPI_INTCLR_REG	0xDC
+
+#define DAVINCI_RXCPPI_BUFCNT0_REG	0xE0
+#define DAVINCI_RXCPPI_BUFCNT1_REG	0xE4
+#define DAVINCI_RXCPPI_BUFCNT2_REG	0xE8
+#define DAVINCI_RXCPPI_BUFCNT3_REG	0xEC
+
+/* CPPI state RAM entries */
+#define DAVINCI_CPPI_STATERAM_BASE_OFFSET   0x100
+
+#define DAVINCI_TXCPPI_STATERAM_OFFSET(chnum) \
+	(DAVINCI_CPPI_STATERAM_BASE_OFFSET +       ((chnum) * 0x40))
+#define DAVINCI_RXCPPI_STATERAM_OFFSET(chnum) \
+	(DAVINCI_CPPI_STATERAM_BASE_OFFSET + 0x20 + ((chnum) * 0x40))
+
+/* CPPI masks */
+#define DAVINCI_DMA_CTRL_ENABLE		1
+#define DAVINCI_DMA_CTRL_DISABLE	0
+
+#define DAVINCI_DMA_ALL_CHANNELS_ENABLE	0xF
+#define DAVINCI_DMA_ALL_CHANNELS_DISABLE 0xF
+
+/* END CPPI-generic (?) */
+
+#define DAVINCI_USB_TX_ENDPTS_MASK	0x1f		/* ep0 + 4 tx */
+#define DAVINCI_USB_RX_ENDPTS_MASK	0x1e		/* 4 rx */
+
+#define DAVINCI_USB_USBINT_SHIFT	16
+#define DAVINCI_USB_TXINT_SHIFT		0
+#define DAVINCI_USB_RXINT_SHIFT		8
+
+#define DAVINCI_INTR_DRVVBUS		0x0100
+
+#define DAVINCI_USB_USBINT_MASK		0x01ff0000	/* 8 Mentor, DRVVBUS */
+#define DAVINCI_USB_TXINT_MASK \
+	(DAVINCI_USB_TX_ENDPTS_MASK << DAVINCI_USB_TXINT_SHIFT)
+#define DAVINCI_USB_RXINT_MASK \
+	(DAVINCI_USB_RX_ENDPTS_MASK << DAVINCI_USB_RXINT_SHIFT)
+
+#define DAVINCI_BASE_OFFSET		0x400
+
+#endif	/* __MUSB_HDRDF_H__ */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
new file mode 100644
index 00000000000..d68ec6daf33
--- /dev/null
+++ b/drivers/usb/musb/musb_core.c
@@ -0,0 +1,2261 @@
+/*
+ * MUSB OTG driver core code
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/*
+ * Inventra (Multipoint) Dual-Role Controller Driver for Linux.
+ *
+ * This consists of a Host Controller Driver (HCD) and a peripheral
+ * controller driver implementing the "Gadget" API; OTG support is
+ * in the works.  These are normal Linux-USB controller drivers which
+ * use IRQs and have no dedicated thread.
+ *
+ * This version of the driver has only been used with products from
+ * Texas Instruments.  Those products integrate the Inventra logic
+ * with other DMA, IRQ, and bus modules, as well as other logic that
+ * needs to be reflected in this driver.
+ *
+ *
+ * NOTE:  the original Mentor code here was pretty much a collection
+ * of mechanisms that don't seem to have been fully integrated/working
+ * for *any* Linux kernel version.  This version aims at Linux 2.6.now,
+ * Key open issues include:
+ *
+ *  - Lack of host-side transaction scheduling, for all transfer types.
+ *    The hardware doesn't do it; instead, software must.
+ *
+ *    This is not an issue for OTG devices that don't support external
+ *    hubs, but for more "normal" USB hosts it's a user issue that the
+ *    "multipoint" support doesn't scale in the expected ways.  That
+ *    includes DaVinci EVM in a common non-OTG mode.
+ *
+ *      * Control and bulk use dedicated endpoints, and there's as
+ *        yet no mechanism to either (a) reclaim the hardware when
+ *        peripherals are NAKing, which gets complicated with bulk
+ *        endpoints, or (b) use more than a single bulk endpoint in
+ *        each direction.
+ *
+ *        RESULT:  one device may be perceived as blocking another one.
+ *
+ *      * Interrupt and isochronous will dynamically allocate endpoint
+ *        hardware, but (a) there's no record keeping for bandwidth;
+ *        (b) in the common case that few endpoints are available, there
+ *        is no mechanism to reuse endpoints to talk to multiple devices.
+ *
+ *        RESULT:  At one extreme, bandwidth can be overcommitted in
+ *        some hardware configurations, no faults will be reported.
+ *        At the other extreme, the bandwidth capabilities which do
+ *        exist tend to be severely undercommitted.  You can't yet hook
+ *        up both a keyboard and a mouse to an external USB hub.
+ */
+
+/*
+ * This gets many kinds of configuration information:
+ *	- Kconfig for everything user-configurable
+ *	- <asm/arch/hdrc_cnf.h> for SOC or family details
+ *	- platform_device for addressing, irq, and platform_data
+ *	- platform_data is mostly for board-specific informarion
+ *
+ * Most of the conditional compilation will (someday) vanish.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#ifdef	CONFIG_ARM
+#include <asm/arch/hardware.h>
+#include <asm/arch/memory.h>
+#include <asm/mach-types.h>
+#endif
+
+#include "musb_core.h"
+
+
+#ifdef CONFIG_ARCH_DAVINCI
+#include "davinci.h"
+#endif
+
+
+
+#if MUSB_DEBUG > 0
+unsigned debug = MUSB_DEBUG;
+module_param(debug, uint, 0);
+MODULE_PARM_DESC(debug, "initial debug message level");
+
+#define MUSB_VERSION_SUFFIX	"/dbg"
+#endif
+
+#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
+#define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
+
+#define MUSB_VERSION_BASE "6.0"
+
+#ifndef MUSB_VERSION_SUFFIX
+#define MUSB_VERSION_SUFFIX	""
+#endif
+#define MUSB_VERSION	MUSB_VERSION_BASE MUSB_VERSION_SUFFIX
+
+#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
+
+#define MUSB_DRIVER_NAME "musb_hdrc"
+const char musb_driver_name[] = MUSB_DRIVER_NAME;
+
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline struct musb *dev_to_musb(struct device *dev)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* usbcore insists dev->driver_data is a "struct hcd *" */
+	return hcd_to_musb(dev_get_drvdata(dev));
+#else
+	return dev_get_drvdata(dev);
+#endif
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifndef CONFIG_USB_TUSB6010
+/*
+ * Load an endpoint's FIFO
+ */
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
+{
+	void __iomem *fifo = hw_ep->fifo;
+
+	prefetch((u8 *)src);
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'T', hw_ep->epnum, fifo, len, src);
+
+	/* we can't assume unaligned reads work */
+	if (likely((0x01 & (unsigned long) src) == 0)) {
+		u16	index = 0;
+
+		/* best case is 32bit-aligned source address */
+		if ((0x02 & (unsigned long) src) == 0) {
+			if (len >= 4) {
+				writesl(fifo, src + index, len >> 2);
+				index += len & ~0x03;
+			}
+			if (len & 0x02) {
+				musb_writew(fifo, 0, *(u16 *)&src[index]);
+				index += 2;
+			}
+		} else {
+			if (len >= 2) {
+				writesw(fifo, src + index, len >> 1);
+				index += len & ~0x01;
+			}
+		}
+		if (len & 0x01)
+			musb_writeb(fifo, 0, src[index]);
+	} else  {
+		/* byte aligned */
+		writesb(fifo, src, len);
+	}
+}
+
+/*
+ * Unload an endpoint's FIFO
+ */
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	void __iomem *fifo = hw_ep->fifo;
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'R', hw_ep->epnum, fifo, len, dst);
+
+	/* we can't assume unaligned writes work */
+	if (likely((0x01 & (unsigned long) dst) == 0)) {
+		u16	index = 0;
+
+		/* best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) dst) == 0) {
+			if (len >= 4) {
+				readsl(fifo, dst, len >> 2);
+				index = len & ~0x03;
+			}
+			if (len & 0x02) {
+				*(u16 *)&dst[index] = musb_readw(fifo, 0);
+				index += 2;
+			}
+		} else {
+			if (len >= 2) {
+				readsw(fifo, dst, len >> 1);
+				index = len & ~0x01;
+			}
+		}
+		if (len & 0x01)
+			dst[index] = musb_readb(fifo, 0);
+	} else  {
+		/* byte aligned */
+		readsb(fifo, dst, len);
+	}
+}
+
+#endif	/* normal PIO */
+
+
+/*-------------------------------------------------------------------------*/
+
+/* for high speed test mode; see USB 2.0 spec 7.1.20 */
+static const u8 musb_test_packet[53] = {
+	/* implicit SYNC then DATA0 to start */
+
+	/* JKJKJKJK x9 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* JJKKJJKK x8 */
+	0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+	/* JJJJKKKK x8 */
+	0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
+	/* JJJJJJJKKKKKKK x8 */
+	0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	/* JJJJJJJK x8 */
+	0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
+	/* JKKKKKKK x10, JK */
+	0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e
+
+	/* implicit CRC16 then EOP to end */
+};
+
+void musb_load_testpacket(struct musb *musb)
+{
+	void __iomem	*regs = musb->endpoints[0].regs;
+
+	musb_ep_select(musb->mregs, 0);
+	musb_write_fifo(musb->control_ep,
+			sizeof(musb_test_packet), musb_test_packet);
+	musb_writew(regs, MUSB_CSR0, MUSB_CSR0_TXPKTRDY);
+}
+
+/*-------------------------------------------------------------------------*/
+
+const char *otg_state_string(struct musb *musb)
+{
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_IDLE:		return "a_idle";
+	case OTG_STATE_A_WAIT_VRISE:	return "a_wait_vrise";
+	case OTG_STATE_A_WAIT_BCON:	return "a_wait_bcon";
+	case OTG_STATE_A_HOST:		return "a_host";
+	case OTG_STATE_A_SUSPEND:	return "a_suspend";
+	case OTG_STATE_A_PERIPHERAL:	return "a_peripheral";
+	case OTG_STATE_A_WAIT_VFALL:	return "a_wait_vfall";
+	case OTG_STATE_A_VBUS_ERR:	return "a_vbus_err";
+	case OTG_STATE_B_IDLE:		return "b_idle";
+	case OTG_STATE_B_SRP_INIT:	return "b_srp_init";
+	case OTG_STATE_B_PERIPHERAL:	return "b_peripheral";
+	case OTG_STATE_B_WAIT_ACON:	return "b_wait_acon";
+	case OTG_STATE_B_HOST:		return "b_host";
+	default:			return "UNDEFINED";
+	}
+}
+
+#ifdef	CONFIG_USB_MUSB_OTG
+
+/*
+ * See also USB_OTG_1-3.pdf 6.6.5 Timers
+ * REVISIT: Are the other timers done in the hardware?
+ */
+#define TB_ASE0_BRST		100	/* Min 3.125 ms */
+
+/*
+ * Handles OTG hnp timeouts, such as b_ase0_brst
+ */
+void musb_otg_timer_func(unsigned long data)
+{
+	struct musb	*musb = (struct musb *)data;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_WAIT_ACON:
+		DBG(1, "HNP: b_wait_acon timeout; back to b_peripheral\n");
+		musb_g_disconnect(musb);
+		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_A_WAIT_BCON:
+		DBG(1, "HNP: a_wait_bcon timeout; back to a_host\n");
+		musb_hnp_stop(musb);
+		break;
+	default:
+		DBG(1, "HNP: Unhandled mode %s\n", otg_state_string(musb));
+	}
+	musb->ignore_disconnect = 0;
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static DEFINE_TIMER(musb_otg_timer, musb_otg_timer_func, 0, 0);
+
+/*
+ * Stops the B-device HNP state. Caller must take care of locking.
+ */
+void musb_hnp_stop(struct musb *musb)
+{
+	struct usb_hcd	*hcd = musb_to_hcd(musb);
+	void __iomem	*mbase = musb->mregs;
+	u8	reg;
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_PERIPHERAL:
+	case OTG_STATE_A_WAIT_VFALL:
+	case OTG_STATE_A_WAIT_BCON:
+		DBG(1, "HNP: Switching back to A-host\n");
+		musb_g_disconnect(musb);
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+		MUSB_HST_MODE(musb);
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_B_HOST:
+		DBG(1, "HNP: Disabling HR\n");
+		hcd->self.is_b_host = 0;
+		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		MUSB_DEV_MODE(musb);
+		reg = musb_readb(mbase, MUSB_POWER);
+		reg |= MUSB_POWER_SUSPENDM;
+		musb_writeb(mbase, MUSB_POWER, reg);
+		/* REVISIT: Start SESSION_REQUEST here? */
+		break;
+	default:
+		DBG(1, "HNP: Stopping in unknown state %s\n",
+			otg_state_string(musb));
+	}
+
+	/*
+	 * When returning to A state after HNP, avoid hub_port_rebounce(),
+	 * which cause occasional OPT A "Did not receive reset after connect"
+	 * errors.
+	 */
+	musb->port1_status &=
+		~(1 << USB_PORT_FEAT_C_CONNECTION);
+}
+
+#endif
+
+/*
+ * Interrupt Service Routine to record USB "global" interrupts.
+ * Since these do not happen often and signify things of
+ * paramount importance, it seems OK to check them individually;
+ * the order of the tests is specified in the manual
+ *
+ * @param musb instance pointer
+ * @param int_usb register contents
+ * @param devctl
+ * @param power
+ */
+
+#define STAGE0_MASK (MUSB_INTR_RESUME | MUSB_INTR_SESSREQ \
+		| MUSB_INTR_VBUSERROR | MUSB_INTR_CONNECT \
+		| MUSB_INTR_RESET)
+
+static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
+				u8 devctl, u8 power)
+{
+	irqreturn_t handled = IRQ_NONE;
+	void __iomem *mbase = musb->mregs;
+
+	DBG(3, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
+		int_usb);
+
+	/* in host mode, the peripheral may issue remote wakeup.
+	 * in peripheral mode, the host may resume the link.
+	 * spurious RESUME irqs happen too, paired with SUSPEND.
+	 */
+	if (int_usb & MUSB_INTR_RESUME) {
+		handled = IRQ_HANDLED;
+		DBG(3, "RESUME (%s)\n", otg_state_string(musb));
+
+		if (devctl & MUSB_DEVCTL_HM) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+			switch (musb->xceiv.state) {
+			case OTG_STATE_A_SUSPEND:
+				/* remote wakeup?  later, GetPortStatus
+				 * will stop RESUME signaling
+				 */
+
+				if (power & MUSB_POWER_SUSPENDM) {
+					/* spurious */
+					musb->int_usb &= ~MUSB_INTR_SUSPEND;
+					DBG(2, "Spurious SUSPENDM\n");
+					break;
+				}
+
+				power &= ~MUSB_POWER_SUSPENDM;
+				musb_writeb(mbase, MUSB_POWER,
+						power | MUSB_POWER_RESUME);
+
+				musb->port1_status |=
+						(USB_PORT_STAT_C_SUSPEND << 16)
+						| MUSB_PORT_STAT_RESUME;
+				musb->rh_timer = jiffies
+						+ msecs_to_jiffies(20);
+
+				musb->xceiv.state = OTG_STATE_A_HOST;
+				musb->is_active = 1;
+				usb_hcd_resume_root_hub(musb_to_hcd(musb));
+				break;
+			case OTG_STATE_B_WAIT_ACON:
+				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb->is_active = 1;
+				MUSB_DEV_MODE(musb);
+				break;
+			default:
+				WARNING("bogus %s RESUME (%s)\n",
+					"host",
+					otg_state_string(musb));
+			}
+#endif
+		} else {
+			switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+			case OTG_STATE_A_SUSPEND:
+				/* possibly DISCONNECT is upcoming */
+				musb->xceiv.state = OTG_STATE_A_HOST;
+				usb_hcd_resume_root_hub(musb_to_hcd(musb));
+				break;
+#endif
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+			case OTG_STATE_B_WAIT_ACON:
+			case OTG_STATE_B_PERIPHERAL:
+				/* disconnect while suspended?  we may
+				 * not get a disconnect irq...
+				 */
+				if ((devctl & MUSB_DEVCTL_VBUS)
+						!= (3 << MUSB_DEVCTL_VBUS_SHIFT)
+						) {
+					musb->int_usb |= MUSB_INTR_DISCONNECT;
+					musb->int_usb &= ~MUSB_INTR_SUSPEND;
+					break;
+				}
+				musb_g_resume(musb);
+				break;
+			case OTG_STATE_B_IDLE:
+				musb->int_usb &= ~MUSB_INTR_SUSPEND;
+				break;
+#endif
+			default:
+				WARNING("bogus %s RESUME (%s)\n",
+					"peripheral",
+					otg_state_string(musb));
+			}
+		}
+	}
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* see manual for the order of the tests */
+	if (int_usb & MUSB_INTR_SESSREQ) {
+		DBG(1, "SESSION_REQUEST (%s)\n", otg_state_string(musb));
+
+		/* IRQ arrives from ID pin sense or (later, if VBUS power
+		 * is removed) SRP.  responses are time critical:
+		 *  - turn on VBUS (with silicon-specific mechanism)
+		 *  - go through A_WAIT_VRISE
+		 *  - ... to A_WAIT_BCON.
+		 * a_wait_vrise_tmout triggers VBUS_ERROR transitions
+		 */
+		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+		musb->ep0_stage = MUSB_EP0_START;
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+		MUSB_HST_MODE(musb);
+		musb_set_vbus(musb, 1);
+
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_VBUSERROR) {
+		int	ignore = 0;
+
+		/* During connection as an A-Device, we may see a short
+		 * current spikes causing voltage drop, because of cable
+		 * and peripheral capacitance combined with vbus draw.
+		 * (So: less common with truly self-powered devices, where
+		 * vbus doesn't act like a power supply.)
+		 *
+		 * Such spikes are short; usually less than ~500 usec, max
+		 * of ~2 msec.  That is, they're not sustained overcurrent
+		 * errors, though they're reported using VBUSERROR irqs.
+		 *
+		 * Workarounds:  (a) hardware: use self powered devices.
+		 * (b) software:  ignore non-repeated VBUS errors.
+		 *
+		 * REVISIT:  do delays from lots of DEBUG_KERNEL checks
+		 * make trouble here, keeping VBUS < 4.4V ?
+		 */
+		switch (musb->xceiv.state) {
+		case OTG_STATE_A_HOST:
+			/* recovery is dicey once we've gotten past the
+			 * initial stages of enumeration, but if VBUS
+			 * stayed ok at the other end of the link, and
+			 * another reset is due (at least for high speed,
+			 * to redo the chirp etc), it might work OK...
+			 */
+		case OTG_STATE_A_WAIT_BCON:
+		case OTG_STATE_A_WAIT_VRISE:
+			if (musb->vbuserr_retry) {
+				musb->vbuserr_retry--;
+				ignore = 1;
+				devctl |= MUSB_DEVCTL_SESSION;
+				musb_writeb(mbase, MUSB_DEVCTL, devctl);
+			} else {
+				musb->port1_status |=
+					  (1 << USB_PORT_FEAT_OVER_CURRENT)
+					| (1 << USB_PORT_FEAT_C_OVER_CURRENT);
+			}
+			break;
+		default:
+			break;
+		}
+
+		DBG(1, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
+				otg_state_string(musb),
+				devctl,
+				({ char *s;
+				switch (devctl & MUSB_DEVCTL_VBUS) {
+				case 0 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<SessEnd"; break;
+				case 1 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<AValid"; break;
+				case 2 << MUSB_DEVCTL_VBUS_SHIFT:
+					s = "<VBusValid"; break;
+				/* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
+				default:
+					s = "VALID"; break;
+				}; s; }),
+				VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
+				musb->port1_status);
+
+		/* go through A_WAIT_VFALL then start a new session */
+		if (!ignore)
+			musb_set_vbus(musb, 0);
+		handled = IRQ_HANDLED;
+	}
+
+	if (int_usb & MUSB_INTR_CONNECT) {
+		struct usb_hcd *hcd = musb_to_hcd(musb);
+
+		handled = IRQ_HANDLED;
+		musb->is_active = 1;
+		set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+		musb->ep0_stage = MUSB_EP0_START;
+
+#ifdef CONFIG_USB_MUSB_OTG
+		/* flush endpoints when transitioning from Device Mode */
+		if (is_peripheral_active(musb)) {
+			/* REVISIT HNP; just force disconnect */
+		}
+		musb_writew(mbase, MUSB_INTRTXE, musb->epmask);
+		musb_writew(mbase, MUSB_INTRRXE, musb->epmask & 0xfffe);
+		musb_writeb(mbase, MUSB_INTRUSBE, 0xf7);
+#endif
+		musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
+					|USB_PORT_STAT_HIGH_SPEED
+					|USB_PORT_STAT_ENABLE
+					);
+		musb->port1_status |= USB_PORT_STAT_CONNECTION
+					|(USB_PORT_STAT_C_CONNECTION << 16);
+
+		/* high vs full speed is just a guess until after reset */
+		if (devctl & MUSB_DEVCTL_LSDEV)
+			musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
+
+		if (hcd->status_urb)
+			usb_hcd_poll_rh_status(hcd);
+		else
+			usb_hcd_resume_root_hub(hcd);
+
+		MUSB_HST_MODE(musb);
+
+		/* indicate new connection to OTG machine */
+		switch (musb->xceiv.state) {
+		case OTG_STATE_B_PERIPHERAL:
+			if (int_usb & MUSB_INTR_SUSPEND) {
+				DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n");
+				musb->xceiv.state = OTG_STATE_B_HOST;
+				hcd->self.is_b_host = 1;
+				int_usb &= ~MUSB_INTR_SUSPEND;
+			} else
+				DBG(1, "CONNECT as b_peripheral???\n");
+			break;
+		case OTG_STATE_B_WAIT_ACON:
+			DBG(1, "HNP: Waiting to switch to b_host state\n");
+			musb->xceiv.state = OTG_STATE_B_HOST;
+			hcd->self.is_b_host = 1;
+			break;
+		default:
+			if ((devctl & MUSB_DEVCTL_VBUS)
+					== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
+				musb->xceiv.state = OTG_STATE_A_HOST;
+				hcd->self.is_b_host = 0;
+			}
+			break;
+		}
+		DBG(1, "CONNECT (%s) devctl %02x\n",
+				otg_state_string(musb), devctl);
+	}
+#endif	/* CONFIG_USB_MUSB_HDRC_HCD */
+
+	/* mentor saves a bit: bus reset and babble share the same irq.
+	 * only host sees babble; only peripheral sees bus reset.
+	 */
+	if (int_usb & MUSB_INTR_RESET) {
+		if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) {
+			/*
+			 * Looks like non-HS BABBLE can be ignored, but
+			 * HS BABBLE is an error condition. For HS the solution
+			 * is to avoid babble in the first place and fix what
+			 * caused BABBLE. When HS BABBLE happens we can only
+			 * stop the session.
+			 */
+			if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV))
+				DBG(1, "BABBLE devctl: %02x\n", devctl);
+			else {
+				ERR("Stopping host session -- babble\n");
+				musb_writeb(mbase, MUSB_DEVCTL, 0);
+			}
+		} else if (is_peripheral_capable()) {
+			DBG(1, "BUS RESET as %s\n", otg_state_string(musb));
+			switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_OTG
+			case OTG_STATE_A_SUSPEND:
+				/* We need to ignore disconnect on suspend
+				 * otherwise tusb 2.0 won't reconnect after a
+				 * power cycle, which breaks otg compliance.
+				 */
+				musb->ignore_disconnect = 1;
+				musb_g_reset(musb);
+				/* FALLTHROUGH */
+			case OTG_STATE_A_WAIT_BCON:	/* OPT TD.4.7-900ms */
+				DBG(1, "HNP: Setting timer as %s\n",
+						otg_state_string(musb));
+				musb_otg_timer.data = (unsigned long)musb;
+				mod_timer(&musb_otg_timer, jiffies
+					+ msecs_to_jiffies(100));
+				break;
+			case OTG_STATE_A_PERIPHERAL:
+				musb_hnp_stop(musb);
+				break;
+			case OTG_STATE_B_WAIT_ACON:
+				DBG(1, "HNP: RESET (%s), to b_peripheral\n",
+					otg_state_string(musb));
+				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				musb_g_reset(musb);
+				break;
+#endif
+			case OTG_STATE_B_IDLE:
+				musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+				/* FALLTHROUGH */
+			case OTG_STATE_B_PERIPHERAL:
+				musb_g_reset(musb);
+				break;
+			default:
+				DBG(1, "Unhandled BUS RESET as %s\n",
+					otg_state_string(musb));
+			}
+		}
+
+		handled = IRQ_HANDLED;
+	}
+	schedule_work(&musb->irq_work);
+
+	return handled;
+}
+
+/*
+ * Interrupt Service Routine to record USB "global" interrupts.
+ * Since these do not happen often and signify things of
+ * paramount importance, it seems OK to check them individually;
+ * the order of the tests is specified in the manual
+ *
+ * @param musb instance pointer
+ * @param int_usb register contents
+ * @param devctl
+ * @param power
+ */
+static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
+				u8 devctl, u8 power)
+{
+	irqreturn_t handled = IRQ_NONE;
+
+#if 0
+/* REVISIT ... this would be for multiplexing periodic endpoints, or
+ * supporting transfer phasing to prevent exceeding ISO bandwidth
+ * limits of a given frame or microframe.
+ *
+ * It's not needed for peripheral side, which dedicates endpoints;
+ * though it _might_ use SOF irqs for other purposes.
+ *
+ * And it's not currently needed for host side, which also dedicates
+ * endpoints, relies on TX/RX interval registers, and isn't claimed
+ * to support ISO transfers yet.
+ */
+	if (int_usb & MUSB_INTR_SOF) {
+		void __iomem *mbase = musb->mregs;
+		struct musb_hw_ep	*ep;
+		u8 epnum;
+		u16 frame;
+
+		DBG(6, "START_OF_FRAME\n");
+		handled = IRQ_HANDLED;
+
+		/* start any periodic Tx transfers waiting for current frame */
+		frame = musb_readw(mbase, MUSB_FRAME);
+		ep = musb->endpoints;
+		for (epnum = 1; (epnum < musb->nr_endpoints)
+					&& (musb->epmask >= (1 << epnum));
+				epnum++, ep++) {
+			/*
+			 * FIXME handle framecounter wraps (12 bits)
+			 * eliminate duplicated StartUrb logic
+			 */
+			if (ep->dwWaitFrame >= frame) {
+				ep->dwWaitFrame = 0;
+				pr_debug("SOF --> periodic TX%s on %d\n",
+					ep->tx_channel ? " DMA" : "",
+					epnum);
+				if (!ep->tx_channel)
+					musb_h_tx_start(musb, epnum);
+				else
+					cppi_hostdma_start(musb, epnum);
+			}
+		}		/* end of for loop */
+	}
+#endif
+
+	if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
+		DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n",
+				otg_state_string(musb),
+				MUSB_MODE(musb), devctl);
+		handled = IRQ_HANDLED;
+
+		switch (musb->xceiv.state) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		case OTG_STATE_A_HOST:
+		case OTG_STATE_A_SUSPEND:
+			musb_root_disconnect(musb);
+			if (musb->a_wait_bcon != 0)
+				musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon));
+			break;
+#endif	/* HOST */
+#ifdef CONFIG_USB_MUSB_OTG
+		case OTG_STATE_B_HOST:
+			musb_hnp_stop(musb);
+			break;
+		case OTG_STATE_A_PERIPHERAL:
+			musb_hnp_stop(musb);
+			musb_root_disconnect(musb);
+			/* FALLTHROUGH */
+		case OTG_STATE_B_WAIT_ACON:
+			/* FALLTHROUGH */
+#endif	/* OTG */
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		case OTG_STATE_B_PERIPHERAL:
+		case OTG_STATE_B_IDLE:
+			musb_g_disconnect(musb);
+			break;
+#endif	/* GADGET */
+		default:
+			WARNING("unhandled DISCONNECT transition (%s)\n",
+				otg_state_string(musb));
+			break;
+		}
+
+		schedule_work(&musb->irq_work);
+	}
+
+	if (int_usb & MUSB_INTR_SUSPEND) {
+		DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
+				otg_state_string(musb), devctl, power);
+		handled = IRQ_HANDLED;
+
+		switch (musb->xceiv.state) {
+#ifdef	CONFIG_USB_MUSB_OTG
+		case OTG_STATE_A_PERIPHERAL:
+			/*
+			 * We cannot stop HNP here, devctl BDEVICE might be
+			 * still set.
+			 */
+			break;
+#endif
+		case OTG_STATE_B_PERIPHERAL:
+			musb_g_suspend(musb);
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.gadget->b_hnp_enable;
+			if (musb->is_active) {
+#ifdef	CONFIG_USB_MUSB_OTG
+				musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+				DBG(1, "HNP: Setting timer for b_ase0_brst\n");
+				musb_otg_timer.data = (unsigned long)musb;
+				mod_timer(&musb_otg_timer, jiffies
+					+ msecs_to_jiffies(TB_ASE0_BRST));
+#endif
+			}
+			break;
+		case OTG_STATE_A_WAIT_BCON:
+			if (musb->a_wait_bcon != 0)
+				musb_platform_try_idle(musb, jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon));
+			break;
+		case OTG_STATE_A_HOST:
+			musb->xceiv.state = OTG_STATE_A_SUSPEND;
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.host->b_hnp_enable;
+			break;
+		case OTG_STATE_B_HOST:
+			/* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
+			DBG(1, "REVISIT: SUSPEND as B_HOST\n");
+			break;
+		default:
+			/* "should not happen" */
+			musb->is_active = 0;
+			break;
+		}
+		schedule_work(&musb->irq_work);
+	}
+
+
+	return handled;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+* Program the HDRC to start (enable interrupts, dma, etc.).
+*/
+void musb_start(struct musb *musb)
+{
+	void __iomem	*regs = musb->mregs;
+	u8		devctl = musb_readb(regs, MUSB_DEVCTL);
+
+	DBG(2, "<== devctl %02x\n", devctl);
+
+	/*  Set INT enable registers, enable interrupts */
+	musb_writew(regs, MUSB_INTRTXE, musb->epmask);
+	musb_writew(regs, MUSB_INTRRXE, musb->epmask & 0xfffe);
+	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+	musb_writeb(regs, MUSB_TESTMODE, 0);
+
+	/* put into basic highspeed mode and start session */
+	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+						| MUSB_POWER_SOFTCONN
+						| MUSB_POWER_HSENAB
+						/* ENSUSPEND wedges tusb */
+						/* | MUSB_POWER_ENSUSPEND */
+						);
+
+	musb->is_active = 0;
+	devctl = musb_readb(regs, MUSB_DEVCTL);
+	devctl &= ~MUSB_DEVCTL_SESSION;
+
+	if (is_otg_enabled(musb)) {
+		/* session started after:
+		 * (a) ID-grounded irq, host mode;
+		 * (b) vbus present/connect IRQ, peripheral mode;
+		 * (c) peripheral initiates, using SRP
+		 */
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->is_active = 1;
+		else
+			devctl |= MUSB_DEVCTL_SESSION;
+
+	} else if (is_host_enabled(musb)) {
+		/* assume ID pin is hard-wired to ground */
+		devctl |= MUSB_DEVCTL_SESSION;
+
+	} else /* peripheral is enabled */ {
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->is_active = 1;
+	}
+	musb_platform_enable(musb);
+	musb_writeb(regs, MUSB_DEVCTL, devctl);
+}
+
+
+static void musb_generic_disable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+	u16	temp;
+
+	/* disable interrupts */
+	musb_writeb(mbase, MUSB_INTRUSBE, 0);
+	musb_writew(mbase, MUSB_INTRTXE, 0);
+	musb_writew(mbase, MUSB_INTRRXE, 0);
+
+	/* off */
+	musb_writeb(mbase, MUSB_DEVCTL, 0);
+
+	/*  flush pending interrupts */
+	temp = musb_readb(mbase, MUSB_INTRUSB);
+	temp = musb_readw(mbase, MUSB_INTRTX);
+	temp = musb_readw(mbase, MUSB_INTRRX);
+
+}
+
+/*
+ * Make the HDRC stop (disable interrupts, etc.);
+ * reversible by musb_start
+ * called on gadget driver unregister
+ * with controller locked, irqs blocked
+ * acts as a NOP unless some role activated the hardware
+ */
+void musb_stop(struct musb *musb)
+{
+	/* stop IRQs, timers, ... */
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+	DBG(3, "HDRC disabled\n");
+
+	/* FIXME
+	 *  - mark host and/or peripheral drivers unusable/inactive
+	 *  - disable DMA (and enable it in HdrcStart)
+	 *  - make sure we can musb_start() after musb_stop(); with
+	 *    OTG mode, gadget driver module rmmod/modprobe cycles that
+	 *  - ...
+	 */
+	musb_platform_try_idle(musb, 0);
+}
+
+static void musb_shutdown(struct platform_device *pdev)
+{
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+	if (musb->clock) {
+		clk_put(musb->clock);
+		musb->clock = NULL;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* FIXME power down */
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * The silicon either has hard-wired endpoint configurations, or else
+ * "dynamic fifo" sizing.  The driver has support for both, though at this
+ * writing only the dynamic sizing is very well tested.   We use normal
+ * idioms to so both modes are compile-tested, but dead code elimination
+ * leaves only the relevant one in the object file.
+ *
+ * We don't currently use dynamic fifo setup capability to do anything
+ * more than selecting one of a bunch of predefined configurations.
+ */
+#if defined(CONFIG_USB_TUSB6010) || \
+	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+static ushort __initdata fifo_mode = 4;
+#else
+static ushort __initdata fifo_mode = 2;
+#endif
+
+/* "modprobe ... fifo_mode=1" etc */
+module_param(fifo_mode, ushort, 0);
+MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
+
+
+enum fifo_style { FIFO_RXTX, FIFO_TX, FIFO_RX } __attribute__ ((packed));
+enum buf_mode { BUF_SINGLE, BUF_DOUBLE } __attribute__ ((packed));
+
+struct fifo_cfg {
+	u8		hw_ep_num;
+	enum fifo_style	style;
+	enum buf_mode	mode;
+	u16		maxpacket;
+};
+
+/*
+ * tables defining fifo_mode values.  define more if you like.
+ * for host side, make sure both halves of ep1 are set up.
+ */
+
+/* mode 0 - fits in 2KB */
+static struct fifo_cfg __initdata mode_0_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 1 - fits in 4KB */
+static struct fifo_cfg __initdata mode_1_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 2 - fits in 4KB */
+static struct fifo_cfg __initdata mode_2_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 3 - fits in 4KB */
+static struct fifo_cfg __initdata mode_3_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
+{ .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 3, .style = FIFO_RXTX, .maxpacket = 256, },
+{ .hw_ep_num = 4, .style = FIFO_RXTX, .maxpacket = 256, },
+};
+
+/* mode 4 - fits in 16KB */
+static struct fifo_cfg __initdata mode_4_cfg[] = {
+{ .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  2, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  3, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  4, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  5, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  6, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 13, .style = FIFO_TX,   .maxpacket = 512, },
+{ .hw_ep_num = 13, .style = FIFO_RX,   .maxpacket = 512, },
+{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
+{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
+};
+
+
+/*
+ * configure a fifo; for non-shared endpoints, this may be called
+ * once for a tx fifo and once for an rx fifo.
+ *
+ * returns negative errno or offset for next fifo.
+ */
+static int __init
+fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
+		const struct fifo_cfg *cfg, u16 offset)
+{
+	void __iomem	*mbase = musb->mregs;
+	int	size = 0;
+	u16	maxpacket = cfg->maxpacket;
+	u16	c_off = offset >> 3;
+	u8	c_size;
+
+	/* expect hw_ep has already been zero-initialized */
+
+	size = ffs(max(maxpacket, (u16) 8)) - 1;
+	maxpacket = 1 << size;
+
+	c_size = size - 3;
+	if (cfg->mode == BUF_DOUBLE) {
+		if ((offset + (maxpacket << 1)) >
+				(1 << (musb->config->ram_bits + 2)))
+			return -EMSGSIZE;
+		c_size |= MUSB_FIFOSZ_DPB;
+	} else {
+		if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2)))
+			return -EMSGSIZE;
+	}
+
+	/* configure the FIFO */
+	musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* EP0 reserved endpoint for control, bidirectional;
+	 * EP1 reserved for bulk, two unidirection halves.
+	 */
+	if (hw_ep->epnum == 1)
+		musb->bulk_ep = hw_ep;
+	/* REVISIT error check:  be sure ep0 can both rx and tx ... */
+#endif
+	switch (cfg->style) {
+	case FIFO_TX:
+		musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+		hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_tx = maxpacket;
+		break;
+	case FIFO_RX:
+		musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_rx = maxpacket;
+		break;
+	case FIFO_RXTX:
+		musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+		hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
+		hw_ep->max_packet_sz_rx = maxpacket;
+
+		musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+		musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+		hw_ep->tx_double_buffered = hw_ep->rx_double_buffered;
+		hw_ep->max_packet_sz_tx = maxpacket;
+
+		hw_ep->is_shared_fifo = true;
+		break;
+	}
+
+	/* NOTE rx and tx endpoint irqs aren't managed separately,
+	 * which happens to be ok
+	 */
+	musb->epmask |= (1 << hw_ep->epnum);
+
+	return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
+}
+
+static struct fifo_cfg __initdata ep0_cfg = {
+	.style = FIFO_RXTX, .maxpacket = 64,
+};
+
+static int __init ep_config_from_table(struct musb *musb)
+{
+	const struct fifo_cfg	*cfg;
+	unsigned		i, n;
+	int			offset;
+	struct musb_hw_ep	*hw_ep = musb->endpoints;
+
+	switch (fifo_mode) {
+	default:
+		fifo_mode = 0;
+		/* FALLTHROUGH */
+	case 0:
+		cfg = mode_0_cfg;
+		n = ARRAY_SIZE(mode_0_cfg);
+		break;
+	case 1:
+		cfg = mode_1_cfg;
+		n = ARRAY_SIZE(mode_1_cfg);
+		break;
+	case 2:
+		cfg = mode_2_cfg;
+		n = ARRAY_SIZE(mode_2_cfg);
+		break;
+	case 3:
+		cfg = mode_3_cfg;
+		n = ARRAY_SIZE(mode_3_cfg);
+		break;
+	case 4:
+		cfg = mode_4_cfg;
+		n = ARRAY_SIZE(mode_4_cfg);
+		break;
+	}
+
+	printk(KERN_DEBUG "%s: setup fifo_mode %d\n",
+			musb_driver_name, fifo_mode);
+
+
+	offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
+	/* assert(offset > 0) */
+
+	/* NOTE:  for RTL versions >= 1.400 EPINFO and RAMINFO would
+	 * be better than static musb->config->num_eps and DYN_FIFO_SIZE...
+	 */
+
+	for (i = 0; i < n; i++) {
+		u8	epn = cfg->hw_ep_num;
+
+		if (epn >= musb->config->num_eps) {
+			pr_debug("%s: invalid ep %d\n",
+					musb_driver_name, epn);
+			continue;
+		}
+		offset = fifo_setup(musb, hw_ep + epn, cfg++, offset);
+		if (offset < 0) {
+			pr_debug("%s: mem overrun, ep %d\n",
+					musb_driver_name, epn);
+			return -EINVAL;
+		}
+		epn++;
+		musb->nr_endpoints = max(epn, musb->nr_endpoints);
+	}
+
+	printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n",
+			musb_driver_name,
+			n + 1, musb->config->num_eps * 2 - 1,
+			offset, (1 << (musb->config->ram_bits + 2)));
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (!musb->bulk_ep) {
+		pr_debug("%s: missing bulk\n", musb_driver_name);
+		return -EINVAL;
+	}
+#endif
+
+	return 0;
+}
+
+
+/*
+ * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
+ * @param musb the controller
+ */
+static int __init ep_config_from_hw(struct musb *musb)
+{
+	u8 epnum = 0, reg;
+	struct musb_hw_ep *hw_ep;
+	void *mbase = musb->mregs;
+
+	DBG(2, "<== static silicon ep config\n");
+
+	/* FIXME pick up ep0 maxpacket size */
+
+	for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
+		musb_ep_select(mbase, epnum);
+		hw_ep = musb->endpoints + epnum;
+
+		/* read from core using indexed model */
+		reg = musb_readb(hw_ep->regs, 0x10 + MUSB_FIFOSIZE);
+		if (!reg) {
+			/* 0's returned when no more endpoints */
+			break;
+		}
+		musb->nr_endpoints++;
+		musb->epmask |= (1 << epnum);
+
+		hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f);
+
+		/* shared TX/RX FIFO? */
+		if ((reg & 0xf0) == 0xf0) {
+			hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx;
+			hw_ep->is_shared_fifo = true;
+			continue;
+		} else {
+			hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4);
+			hw_ep->is_shared_fifo = false;
+		}
+
+		/* FIXME set up hw_ep->{rx,tx}_double_buffered */
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		/* pick an RX/TX endpoint for bulk */
+		if (hw_ep->max_packet_sz_tx < 512
+				|| hw_ep->max_packet_sz_rx < 512)
+			continue;
+
+		/* REVISIT:  this algorithm is lazy, we should at least
+		 * try to pick a double buffered endpoint.
+		 */
+		if (musb->bulk_ep)
+			continue;
+		musb->bulk_ep = hw_ep;
+#endif
+	}
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (!musb->bulk_ep) {
+		pr_debug("%s: missing bulk\n", musb_driver_name);
+		return -EINVAL;
+	}
+#endif
+
+	return 0;
+}
+
+enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
+
+/* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
+ * configure endpoints, or take their config from silicon
+ */
+static int __init musb_core_init(u16 musb_type, struct musb *musb)
+{
+#ifdef MUSB_AHB_ID
+	u32 data;
+#endif
+	u8 reg;
+	char *type;
+	u16 hwvers, rev_major, rev_minor;
+	char aInfo[78], aRevision[32], aDate[12];
+	void __iomem	*mbase = musb->mregs;
+	int		status = 0;
+	int		i;
+
+	/* log core options (read using indexed model) */
+	musb_ep_select(mbase, 0);
+	reg = musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
+
+	strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
+	if (reg & MUSB_CONFIGDATA_DYNFIFO)
+		strcat(aInfo, ", dyn FIFOs");
+	if (reg & MUSB_CONFIGDATA_MPRXE) {
+		strcat(aInfo, ", bulk combine");
+#ifdef C_MP_RX
+		musb->bulk_combine = true;
+#else
+		strcat(aInfo, " (X)");		/* no driver support */
+#endif
+	}
+	if (reg & MUSB_CONFIGDATA_MPTXE) {
+		strcat(aInfo, ", bulk split");
+#ifdef C_MP_TX
+		musb->bulk_split = true;
+#else
+		strcat(aInfo, " (X)");		/* no driver support */
+#endif
+	}
+	if (reg & MUSB_CONFIGDATA_HBRXE) {
+		strcat(aInfo, ", HB-ISO Rx");
+		strcat(aInfo, " (X)");		/* no driver support */
+	}
+	if (reg & MUSB_CONFIGDATA_HBTXE) {
+		strcat(aInfo, ", HB-ISO Tx");
+		strcat(aInfo, " (X)");		/* no driver support */
+	}
+	if (reg & MUSB_CONFIGDATA_SOFTCONE)
+		strcat(aInfo, ", SoftConn");
+
+	printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n",
+			musb_driver_name, reg, aInfo);
+
+#ifdef MUSB_AHB_ID
+	data = musb_readl(mbase, 0x404);
+	sprintf(aDate, "%04d-%02x-%02x", (data & 0xffff),
+		(data >> 16) & 0xff, (data >> 24) & 0xff);
+	/* FIXME ID2 and ID3 are unused */
+	data = musb_readl(mbase, 0x408);
+	printk(KERN_DEBUG "ID2=%lx\n", (long unsigned)data);
+	data = musb_readl(mbase, 0x40c);
+	printk(KERN_DEBUG "ID3=%lx\n", (long unsigned)data);
+	reg = musb_readb(mbase, 0x400);
+	musb_type = ('M' == reg) ? MUSB_CONTROLLER_MHDRC : MUSB_CONTROLLER_HDRC;
+#else
+	aDate[0] = 0;
+#endif
+	if (MUSB_CONTROLLER_MHDRC == musb_type) {
+		musb->is_multipoint = 1;
+		type = "M";
+	} else {
+		musb->is_multipoint = 0;
+		type = "";
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+#ifndef	CONFIG_USB_OTG_BLACKLIST_HUB
+		printk(KERN_ERR
+			"%s: kernel must blacklist external hubs\n",
+			musb_driver_name);
+#endif
+#endif
+	}
+
+	/* log release info */
+	hwvers = musb_readw(mbase, MUSB_HWVERS);
+	rev_major = (hwvers >> 10) & 0x1f;
+	rev_minor = hwvers & 0x3ff;
+	snprintf(aRevision, 32, "%d.%d%s", rev_major,
+		rev_minor, (hwvers & 0x8000) ? "RC" : "");
+	printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n",
+			musb_driver_name, type, aRevision, aDate);
+
+	/* configure ep0 */
+	musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
+	musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+
+	/* discover endpoint configuration */
+	musb->nr_endpoints = 1;
+	musb->epmask = 1;
+
+	if (reg & MUSB_CONFIGDATA_DYNFIFO) {
+		if (musb->config->dyn_fifo)
+			status = ep_config_from_table(musb);
+		else {
+			ERR("reconfigure software for Dynamic FIFOs\n");
+			status = -ENODEV;
+		}
+	} else {
+		if (!musb->config->dyn_fifo)
+			status = ep_config_from_hw(musb);
+		else {
+			ERR("reconfigure software for static FIFOs\n");
+			return -ENODEV;
+		}
+	}
+
+	if (status < 0)
+		return status;
+
+	/* finish init, and print endpoint config */
+	for (i = 0; i < musb->nr_endpoints; i++) {
+		struct musb_hw_ep	*hw_ep = musb->endpoints + i;
+
+		hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
+#ifdef CONFIG_USB_TUSB6010
+		hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
+		hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
+		hw_ep->fifo_sync_va =
+			musb->sync_va + 0x400 + MUSB_FIFO_OFFSET(i);
+
+		if (i == 0)
+			hw_ep->conf = mbase - 0x400 + TUSB_EP0_CONF;
+		else
+			hw_ep->conf = mbase + 0x400 + (((i - 1) & 0xf) << 2);
+#endif
+
+		hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		hw_ep->target_regs = MUSB_BUSCTL_OFFSET(i, 0) + mbase;
+		hw_ep->rx_reinit = 1;
+		hw_ep->tx_reinit = 1;
+#endif
+
+		if (hw_ep->max_packet_sz_tx) {
+			printk(KERN_DEBUG
+				"%s: hw_ep %d%s, %smax %d\n",
+				musb_driver_name, i,
+				hw_ep->is_shared_fifo ? "shared" : "tx",
+				hw_ep->tx_double_buffered
+					? "doublebuffer, " : "",
+				hw_ep->max_packet_sz_tx);
+		}
+		if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
+			printk(KERN_DEBUG
+				"%s: hw_ep %d%s, %smax %d\n",
+				musb_driver_name, i,
+				"rx",
+				hw_ep->rx_double_buffered
+					? "doublebuffer, " : "",
+				hw_ep->max_packet_sz_rx);
+		}
+		if (!(hw_ep->max_packet_sz_tx || hw_ep->max_packet_sz_rx))
+			DBG(1, "hw_ep %d not configured\n", i);
+	}
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+
+static irqreturn_t generic_interrupt(int irq, void *__hci)
+{
+	unsigned long	flags;
+	irqreturn_t	retval = IRQ_NONE;
+	struct musb	*musb = __hci;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+	if (musb->int_usb || musb->int_tx || musb->int_rx)
+		retval = musb_interrupt(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	/* REVISIT we sometimes get spurious IRQs on g_ep0
+	 * not clear why...
+	 */
+	if (retval != IRQ_HANDLED)
+		DBG(5, "spurious?\n");
+
+	return IRQ_HANDLED;
+}
+
+#else
+#define generic_interrupt	NULL
+#endif
+
+/*
+ * handle all the irqs defined by the HDRC core. for now we expect:  other
+ * irq sources (phy, dma, etc) will be handled first, musb->int_* values
+ * will be assigned, and the irq will already have been acked.
+ *
+ * called in irq context with spinlock held, irqs blocked
+ */
+irqreturn_t musb_interrupt(struct musb *musb)
+{
+	irqreturn_t	retval = IRQ_NONE;
+	u8		devctl, power;
+	int		ep_num;
+	u32		reg;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	power = musb_readb(musb->mregs, MUSB_POWER);
+
+	DBG(4, "** IRQ %s usb%04x tx%04x rx%04x\n",
+		(devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
+		musb->int_usb, musb->int_tx, musb->int_rx);
+
+	/* the core can interrupt us for multiple reasons; docs have
+	 * a generic interrupt flowchart to follow
+	 */
+	if (musb->int_usb & STAGE0_MASK)
+		retval |= musb_stage0_irq(musb, musb->int_usb,
+				devctl, power);
+
+	/* "stage 1" is handling endpoint irqs */
+
+	/* handle endpoint 0 first */
+	if (musb->int_tx & 1) {
+		if (devctl & MUSB_DEVCTL_HM)
+			retval |= musb_h_ep0_irq(musb);
+		else
+			retval |= musb_g_ep0_irq(musb);
+	}
+
+	/* RX on endpoints 1-15 */
+	reg = musb->int_rx >> 1;
+	ep_num = 1;
+	while (reg) {
+		if (reg & 1) {
+			/* musb_ep_select(musb->mregs, ep_num); */
+			/* REVISIT just retval = ep->rx_irq(...) */
+			retval = IRQ_HANDLED;
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_rx(musb, ep_num);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_rx(musb, ep_num);
+			}
+		}
+
+		reg >>= 1;
+		ep_num++;
+	}
+
+	/* TX on endpoints 1-15 */
+	reg = musb->int_tx >> 1;
+	ep_num = 1;
+	while (reg) {
+		if (reg & 1) {
+			/* musb_ep_select(musb->mregs, ep_num); */
+			/* REVISIT just retval |= ep->tx_irq(...) */
+			retval = IRQ_HANDLED;
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_tx(musb, ep_num);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_tx(musb, ep_num);
+			}
+		}
+		reg >>= 1;
+		ep_num++;
+	}
+
+	/* finish handling "global" interrupts after handling fifos */
+	if (musb->int_usb)
+		retval |= musb_stage2_irq(musb,
+				musb->int_usb, devctl, power);
+
+	return retval;
+}
+
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+static int __initdata use_dma = 1;
+
+/* "modprobe ... use_dma=0" etc */
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
+
+void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
+{
+	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	/* called with controller lock already held */
+
+	if (!epnum) {
+#ifndef CONFIG_USB_TUSB_OMAP_DMA
+		if (!is_cppi_enabled()) {
+			/* endpoint 0 */
+			if (devctl & MUSB_DEVCTL_HM)
+				musb_h_ep0_irq(musb);
+			else
+				musb_g_ep0_irq(musb);
+		}
+#endif
+	} else {
+		/* endpoints 1..15 */
+		if (transmit) {
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_tx(musb, epnum);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_tx(musb, epnum);
+			}
+		} else {
+			/* receive */
+			if (devctl & MUSB_DEVCTL_HM) {
+				if (is_host_capable())
+					musb_host_rx(musb, epnum);
+			} else {
+				if (is_peripheral_capable())
+					musb_g_rx(musb, epnum);
+			}
+		}
+	}
+}
+
+#else
+#define use_dma			0
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_SYSFS
+
+static ssize_t
+musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct musb *musb = dev_to_musb(dev);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = sprintf(buf, "%s\n", otg_state_string(musb));
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+static ssize_t
+musb_mode_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	if (!strncmp(buf, "host", 4))
+		musb_platform_set_mode(musb, MUSB_HOST);
+	if (!strncmp(buf, "peripheral", 10))
+		musb_platform_set_mode(musb, MUSB_PERIPHERAL);
+	if (!strncmp(buf, "otg", 3))
+		musb_platform_set_mode(musb, MUSB_OTG);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return n;
+}
+static DEVICE_ATTR(mode, 0644, musb_mode_show, musb_mode_store);
+
+static ssize_t
+musb_vbus_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	unsigned long	val;
+
+	if (sscanf(buf, "%lu", &val) < 1) {
+		printk(KERN_ERR "Invalid VBUS timeout ms value\n");
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb->a_wait_bcon = val;
+	if (musb->xceiv.state == OTG_STATE_A_WAIT_BCON)
+		musb->is_active = 0;
+	musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return n;
+}
+
+static ssize_t
+musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned long	flags;
+	unsigned long	val;
+	int		vbus;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	val = musb->a_wait_bcon;
+	vbus = musb_platform_get_vbus_status(musb);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return sprintf(buf, "Vbus %s, timeout %lu\n",
+			vbus ? "on" : "off", val);
+}
+static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+/* Gadget drivers can't know that a host is connected so they might want
+ * to start SRP, but users can.  This allows userspace to trigger SRP.
+ */
+static ssize_t
+musb_srp_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t n)
+{
+	struct musb	*musb = dev_to_musb(dev);
+	unsigned short	srp;
+
+	if (sscanf(buf, "%hu", &srp) != 1
+			|| (srp != 1)) {
+		printk(KERN_ERR "SRP: Value must be 1\n");
+		return -EINVAL;
+	}
+
+	if (srp == 1)
+		musb_g_wakeup(musb);
+
+	return n;
+}
+static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store);
+
+#endif /* CONFIG_USB_GADGET_MUSB_HDRC */
+
+#endif	/* sysfs */
+
+/* Only used to provide driver mode change events */
+static void musb_irq_work(struct work_struct *data)
+{
+	struct musb *musb = container_of(data, struct musb, irq_work);
+	static int old_state;
+
+	if (musb->xceiv.state != old_state) {
+		old_state = musb->xceiv.state;
+		sysfs_notify(&musb->controller->kobj, NULL, "mode");
+	}
+}
+
+/* --------------------------------------------------------------------------
+ * Init support
+ */
+
+static struct musb *__init
+allocate_instance(struct device *dev,
+		struct musb_hdrc_config *config, void __iomem *mbase)
+{
+	struct musb		*musb;
+	struct musb_hw_ep	*ep;
+	int			epnum;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	struct usb_hcd	*hcd;
+
+	hcd = usb_create_hcd(&musb_hc_driver, dev, dev->bus_id);
+	if (!hcd)
+		return NULL;
+	/* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
+
+	musb = hcd_to_musb(hcd);
+	INIT_LIST_HEAD(&musb->control);
+	INIT_LIST_HEAD(&musb->in_bulk);
+	INIT_LIST_HEAD(&musb->out_bulk);
+
+	hcd->uses_new_polling = 1;
+
+	musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+#else
+	musb = kzalloc(sizeof *musb, GFP_KERNEL);
+	if (!musb)
+		return NULL;
+	dev_set_drvdata(dev, musb);
+
+#endif
+
+	musb->mregs = mbase;
+	musb->ctrl_base = mbase;
+	musb->nIrq = -ENODEV;
+	musb->config = config;
+	for (epnum = 0, ep = musb->endpoints;
+			epnum < musb->config->num_eps;
+			epnum++, ep++) {
+
+		ep->musb = musb;
+		ep->epnum = epnum;
+	}
+
+	musb->controller = dev;
+	return musb;
+}
+
+static void musb_free(struct musb *musb)
+{
+	/* this has multiple entry modes. it handles fault cleanup after
+	 * probe(), where things may be partially set up, as well as rmmod
+	 * cleanup after everything's been de-activated.
+	 */
+
+#ifdef CONFIG_SYSFS
+	device_remove_file(musb->controller, &dev_attr_mode);
+	device_remove_file(musb->controller, &dev_attr_vbus);
+#ifdef CONFIG_USB_MUSB_OTG
+	device_remove_file(musb->controller, &dev_attr_srp);
+#endif
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	musb_gadget_cleanup(musb);
+#endif
+
+	if (musb->nIrq >= 0) {
+		disable_irq_wake(musb->nIrq);
+		free_irq(musb->nIrq, musb);
+	}
+	if (is_dma_capable() && musb->dma_controller) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		(void) c->stop(c);
+		dma_controller_destroy(c);
+	}
+
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_platform_exit(musb);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+
+	if (musb->clock) {
+		clk_disable(musb->clock);
+		clk_put(musb->clock);
+	}
+
+#ifdef CONFIG_USB_MUSB_OTG
+	put_device(musb->xceiv.dev);
+#endif
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	usb_put_hcd(musb_to_hcd(musb));
+#else
+	kfree(musb);
+#endif
+}
+
+/*
+ * Perform generic per-controller initialization.
+ *
+ * @pDevice: the controller (already clocked, etc)
+ * @nIrq: irq
+ * @mregs: virtual address of controller registers,
+ *	not yet corrected for platform-specific offsets
+ */
+static int __init
+musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
+{
+	int			status;
+	struct musb		*musb;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+
+	/* The driver might handle more features than the board; OK.
+	 * Fail when the board needs a feature that's not enabled.
+	 */
+	if (!plat) {
+		dev_dbg(dev, "no platform_data?\n");
+		return -ENODEV;
+	}
+	switch (plat->mode) {
+	case MUSB_HOST:
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		break;
+#else
+		goto bad_config;
+#endif
+	case MUSB_PERIPHERAL:
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		break;
+#else
+		goto bad_config;
+#endif
+	case MUSB_OTG:
+#ifdef CONFIG_USB_MUSB_OTG
+		break;
+#else
+bad_config:
+#endif
+	default:
+		dev_err(dev, "incompatible Kconfig role setting\n");
+		return -EINVAL;
+	}
+
+	/* allocate */
+	musb = allocate_instance(dev, plat->config, ctrl);
+	if (!musb)
+		return -ENOMEM;
+
+	spin_lock_init(&musb->lock);
+	musb->board_mode = plat->mode;
+	musb->board_set_power = plat->set_power;
+	musb->set_clock = plat->set_clock;
+	musb->min_power = plat->min_power;
+
+	/* Clock usage is chip-specific ... functional clock (DaVinci,
+	 * OMAP2430), or PHY ref (some TUSB6010 boards).  All this core
+	 * code does is make sure a clock handle is available; platform
+	 * code manages it during start/stop and suspend/resume.
+	 */
+	if (plat->clock) {
+		musb->clock = clk_get(dev, plat->clock);
+		if (IS_ERR(musb->clock)) {
+			status = PTR_ERR(musb->clock);
+			musb->clock = NULL;
+			goto fail;
+		}
+	}
+
+	/* assume vbus is off */
+
+	/* platform adjusts musb->mregs and musb->isr if needed,
+	 * and activates clocks
+	 */
+	musb->isr = generic_interrupt;
+	status = musb_platform_init(musb);
+
+	if (status < 0)
+		goto fail;
+	if (!musb->isr) {
+		status = -ENODEV;
+		goto fail2;
+	}
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+	if (use_dma && dev->dma_mask) {
+		struct dma_controller	*c;
+
+		c = dma_controller_create(musb, musb->mregs);
+		musb->dma_controller = c;
+		if (c)
+			(void) c->start(c);
+	}
+#endif
+	/* ideally this would be abstracted in platform setup */
+	if (!is_dma_capable() || !musb->dma_controller)
+		dev->dma_mask = NULL;
+
+	/* be sure interrupts are disabled before connecting ISR */
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+
+	/* setup musb parts of the core (especially endpoints) */
+	status = musb_core_init(plat->config->multipoint
+			? MUSB_CONTROLLER_MHDRC
+			: MUSB_CONTROLLER_HDRC, musb);
+	if (status < 0)
+		goto fail2;
+
+	/* Init IRQ workqueue before request_irq */
+	INIT_WORK(&musb->irq_work, musb_irq_work);
+
+	/* attach to the IRQ */
+	if (request_irq(nIrq, musb->isr, 0, dev->bus_id, musb)) {
+		dev_err(dev, "request_irq %d failed!\n", nIrq);
+		status = -ENODEV;
+		goto fail2;
+	}
+	musb->nIrq = nIrq;
+/* FIXME this handles wakeup irqs wrong */
+	if (enable_irq_wake(nIrq) == 0)
+		device_init_wakeup(dev, 1);
+
+	pr_info("%s: USB %s mode controller at %p using %s, IRQ %d\n",
+			musb_driver_name,
+			({char *s;
+			switch (musb->board_mode) {
+			case MUSB_HOST:		s = "Host"; break;
+			case MUSB_PERIPHERAL:	s = "Peripheral"; break;
+			default:		s = "OTG"; break;
+			}; s; }),
+			ctrl,
+			(is_dma_capable() && musb->dma_controller)
+				? "DMA" : "PIO",
+			musb->nIrq);
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	/* host side needs more setup, except for no-host modes */
+	if (musb->board_mode != MUSB_PERIPHERAL) {
+		struct usb_hcd	*hcd = musb_to_hcd(musb);
+
+		if (musb->board_mode == MUSB_OTG)
+			hcd->self.otg_port = 1;
+		musb->xceiv.host = &hcd->self;
+		hcd->power_budget = 2 * (plat->power ? : 250);
+	}
+#endif				/* CONFIG_USB_MUSB_HDRC_HCD */
+
+	/* For the host-only role, we can activate right away.
+	 * (We expect the ID pin to be forcibly grounded!!)
+	 * Otherwise, wait till the gadget driver hooks up.
+	 */
+	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+		MUSB_HST_MODE(musb);
+		musb->xceiv.default_a = 1;
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+
+		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+
+		DBG(1, "%s mode, status %d, devctl %02x %c\n",
+			"HOST", status,
+			musb_readb(musb->mregs, MUSB_DEVCTL),
+			(musb_readb(musb->mregs, MUSB_DEVCTL)
+					& MUSB_DEVCTL_BDEVICE
+				? 'B' : 'A'));
+
+	} else /* peripheral is enabled */ {
+		MUSB_DEV_MODE(musb);
+		musb->xceiv.default_a = 0;
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+
+		status = musb_gadget_setup(musb);
+
+		DBG(1, "%s mode, status %d, dev%02x\n",
+			is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
+			status,
+			musb_readb(musb->mregs, MUSB_DEVCTL));
+
+	}
+
+	if (status == 0)
+		musb_debug_create("driver/musb_hdrc", musb);
+	else {
+fail:
+		if (musb->clock)
+			clk_put(musb->clock);
+		device_init_wakeup(dev, 0);
+		musb_free(musb);
+		return status;
+	}
+
+#ifdef CONFIG_SYSFS
+	status = device_create_file(dev, &dev_attr_mode);
+	status = device_create_file(dev, &dev_attr_vbus);
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	status = device_create_file(dev, &dev_attr_srp);
+#endif /* CONFIG_USB_GADGET_MUSB_HDRC */
+	status = 0;
+#endif
+
+	return status;
+
+fail2:
+	musb_platform_exit(musb);
+	goto fail;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* all implementations (PCI bridge to FPGA, VLYNQ, etc) should just
+ * bridge to a platform device; this driver then suffices.
+ */
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+static u64	*orig_dma_mask;
+#endif
+
+static int __init musb_probe(struct platform_device *pdev)
+{
+	struct device	*dev = &pdev->dev;
+	int		irq = platform_get_irq(pdev, 0);
+	struct resource	*iomem;
+	void __iomem	*base;
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem || irq == 0)
+		return -ENODEV;
+
+	base = ioremap(iomem->start, iomem->end - iomem->start + 1);
+	if (!base) {
+		dev_err(dev, "ioremap failed\n");
+		return -ENOMEM;
+	}
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+	/* clobbered by use_dma=n */
+	orig_dma_mask = dev->dma_mask;
+#endif
+	return musb_init_controller(dev, irq, base);
+}
+
+static int __devexit musb_remove(struct platform_device *pdev)
+{
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+	void __iomem	*ctrl_base = musb->ctrl_base;
+
+	/* this gets called on rmmod.
+	 *  - Host mode: host may still be active
+	 *  - Peripheral mode: peripheral is deactivated (or never-activated)
+	 *  - OTG mode: both roles are deactivated (or never-activated)
+	 */
+	musb_shutdown(pdev);
+	musb_debug_delete("driver/musb_hdrc", musb);
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (musb->board_mode == MUSB_HOST)
+		usb_remove_hcd(musb_to_hcd(musb));
+#endif
+	musb_free(musb);
+	iounmap(ctrl_base);
+	device_init_wakeup(&pdev->dev, 0);
+#ifndef CONFIG_MUSB_PIO_ONLY
+	pdev->dev.dma_mask = orig_dma_mask;
+#endif
+	return 0;
+}
+
+#ifdef	CONFIG_PM
+
+static int musb_suspend(struct platform_device *pdev, pm_message_t message)
+{
+	unsigned long	flags;
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+
+	if (!musb->clock)
+		return 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (is_peripheral_active(musb)) {
+		/* FIXME force disconnect unless we know USB will wake
+		 * the system up quickly enough to respond ...
+		 */
+	} else if (is_host_active(musb)) {
+		/* we know all the children are suspended; sometimes
+		 * they will even be wakeup-enabled.
+		 */
+	}
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 0);
+	else
+		clk_disable(musb->clock);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+static int musb_resume(struct platform_device *pdev)
+{
+	unsigned long	flags;
+	struct musb	*musb = dev_to_musb(&pdev->dev);
+
+	if (!musb->clock)
+		return 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 1);
+	else
+		clk_enable(musb->clock);
+
+	/* for static cmos like DaVinci, register values were preserved
+	 * unless for some reason the whole soc powered down and we're
+	 * not treating that as a whole-system restart (e.g. swsusp)
+	 */
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+#else
+#define	musb_suspend	NULL
+#define	musb_resume	NULL
+#endif
+
+static struct platform_driver musb_driver = {
+	.driver = {
+		.name		= (char *)musb_driver_name,
+		.bus		= &platform_bus_type,
+		.owner		= THIS_MODULE,
+	},
+	.remove		= __devexit_p(musb_remove),
+	.shutdown	= musb_shutdown,
+	.suspend	= musb_suspend,
+	.resume		= musb_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init musb_init(void)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	if (usb_disabled())
+		return 0;
+#endif
+
+	pr_info("%s: version " MUSB_VERSION ", "
+#ifdef CONFIG_MUSB_PIO_ONLY
+		"pio"
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+		"cppi-dma"
+#elif defined(CONFIG_USB_INVENTRA_DMA)
+		"musb-dma"
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+		"tusb-omap-dma"
+#else
+		"?dma?"
+#endif
+		", "
+#ifdef CONFIG_USB_MUSB_OTG
+		"otg (peripheral+host)"
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+		"peripheral"
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+		"host"
+#endif
+		", debug=%d\n",
+		musb_driver_name, debug);
+	return platform_driver_probe(&musb_driver, musb_probe);
+}
+
+/* make us init after usbcore and before usb
+ * gadget and host-side drivers start to register
+ */
+subsys_initcall(musb_init);
+
+static void __exit musb_cleanup(void)
+{
+	platform_driver_unregister(&musb_driver);
+}
+module_exit(musb_cleanup);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
new file mode 100644
index 00000000000..eade46d8170
--- /dev/null
+++ b/drivers/usb/musb/musb_core.h
@@ -0,0 +1,507 @@
+/*
+ * MUSB OTG driver defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_CORE_H__
+#define __MUSB_CORE_H__
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/musb.h>
+
+struct musb;
+struct musb_hw_ep;
+struct musb_ep;
+
+
+#include "musb_debug.h"
+#include "musb_dma.h"
+
+#include "musb_io.h"
+#include "musb_regs.h"
+
+#include "musb_gadget.h"
+#include "../core/hcd.h"
+#include "musb_host.h"
+
+
+
+#ifdef CONFIG_USB_MUSB_OTG
+
+#define	is_peripheral_enabled(musb)	((musb)->board_mode != MUSB_HOST)
+#define	is_host_enabled(musb)		((musb)->board_mode != MUSB_PERIPHERAL)
+#define	is_otg_enabled(musb)		((musb)->board_mode == MUSB_OTG)
+
+/* NOTE:  otg and peripheral-only state machines start at B_IDLE.
+ * OTG or host-only go to A_IDLE when ID is sensed.
+ */
+#define is_peripheral_active(m)		(!(m)->is_host)
+#define is_host_active(m)		((m)->is_host)
+
+#else
+#define	is_peripheral_enabled(musb)	is_peripheral_capable()
+#define	is_host_enabled(musb)		is_host_capable()
+#define	is_otg_enabled(musb)		0
+
+#define	is_peripheral_active(musb)	is_peripheral_capable()
+#define	is_host_active(musb)		is_host_capable()
+#endif
+
+#if defined(CONFIG_USB_MUSB_OTG) || defined(CONFIG_USB_MUSB_PERIPHERAL)
+/* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always
+ * override that choice selection (often USB_GADGET_DUMMY_HCD).
+ */
+#ifndef CONFIG_USB_GADGET_MUSB_HDRC
+#error bogus Kconfig output ... select CONFIG_USB_GADGET_MUSB_HDRC
+#endif
+#endif	/* need MUSB gadget selection */
+
+
+#ifdef CONFIG_PROC_FS
+#include <linux/fs.h>
+#define MUSB_CONFIG_PROC_FS
+#endif
+
+/****************************** PERIPHERAL ROLE *****************************/
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+#define	is_peripheral_capable()	(1)
+
+extern irqreturn_t musb_g_ep0_irq(struct musb *);
+extern void musb_g_tx(struct musb *, u8);
+extern void musb_g_rx(struct musb *, u8);
+extern void musb_g_reset(struct musb *);
+extern void musb_g_suspend(struct musb *);
+extern void musb_g_resume(struct musb *);
+extern void musb_g_wakeup(struct musb *);
+extern void musb_g_disconnect(struct musb *);
+
+#else
+
+#define	is_peripheral_capable()	(0)
+
+static inline irqreturn_t musb_g_ep0_irq(struct musb *m) { return IRQ_NONE; }
+static inline void musb_g_reset(struct musb *m) {}
+static inline void musb_g_suspend(struct musb *m) {}
+static inline void musb_g_resume(struct musb *m) {}
+static inline void musb_g_wakeup(struct musb *m) {}
+static inline void musb_g_disconnect(struct musb *m) {}
+
+#endif
+
+/****************************** HOST ROLE ***********************************/
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+
+#define	is_host_capable()	(1)
+
+extern irqreturn_t musb_h_ep0_irq(struct musb *);
+extern void musb_host_tx(struct musb *, u8);
+extern void musb_host_rx(struct musb *, u8);
+
+#else
+
+#define	is_host_capable()	(0)
+
+static inline irqreturn_t musb_h_ep0_irq(struct musb *m) { return IRQ_NONE; }
+static inline void musb_host_tx(struct musb *m, u8 e) {}
+static inline void musb_host_rx(struct musb *m, u8 e) {}
+
+#endif
+
+
+/****************************** CONSTANTS ********************************/
+
+#ifndef MUSB_C_NUM_EPS
+#define MUSB_C_NUM_EPS ((u8)16)
+#endif
+
+#ifndef MUSB_MAX_END0_PACKET
+#define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE)
+#endif
+
+/* host side ep0 states */
+enum musb_h_ep0_state {
+	MUSB_EP0_IDLE,
+	MUSB_EP0_START,			/* expect ack of setup */
+	MUSB_EP0_IN,			/* expect IN DATA */
+	MUSB_EP0_OUT,			/* expect ack of OUT DATA */
+	MUSB_EP0_STATUS,		/* expect ack of STATUS */
+} __attribute__ ((packed));
+
+/* peripheral side ep0 states */
+enum musb_g_ep0_state {
+	MUSB_EP0_STAGE_SETUP,		/* idle, waiting for setup */
+	MUSB_EP0_STAGE_TX,		/* IN data */
+	MUSB_EP0_STAGE_RX,		/* OUT data */
+	MUSB_EP0_STAGE_STATUSIN,	/* (after OUT data) */
+	MUSB_EP0_STAGE_STATUSOUT,	/* (after IN data) */
+	MUSB_EP0_STAGE_ACKWAIT,		/* after zlp, before statusin */
+} __attribute__ ((packed));
+
+/* OTG protocol constants */
+#define OTG_TIME_A_WAIT_VRISE	100		/* msec (max) */
+#define OTG_TIME_A_WAIT_BCON	0		/* 0=infinite; min 1000 msec */
+#define OTG_TIME_A_IDLE_BDIS	200		/* msec (min) */
+
+/*************************** REGISTER ACCESS ********************************/
+
+/* Endpoint registers (other than dynfifo setup) can be accessed either
+ * directly with the "flat" model, or after setting up an index register.
+ */
+
+#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \
+		|| defined(CONFIG_ARCH_OMAP3430)
+/* REVISIT indexed access seemed to
+ * misbehave (on DaVinci) for at least peripheral IN ...
+ */
+#define	MUSB_FLAT_REG
+#endif
+
+/* TUSB mapping: "flat" plus ep0 special cases */
+#if	defined(CONFIG_USB_TUSB6010)
+#define musb_ep_select(_mbase, _epnum) \
+	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define	MUSB_EP_OFFSET			MUSB_TUSB_OFFSET
+
+/* "flat" mapping: each endpoint has its own i/o address */
+#elif	defined(MUSB_FLAT_REG)
+#define musb_ep_select(_mbase, _epnum)	(((void)(_mbase)), ((void)(_epnum)))
+#define	MUSB_EP_OFFSET			MUSB_FLAT_OFFSET
+
+/* "indexed" mapping: INDEX register controls register bank select */
+#else
+#define musb_ep_select(_mbase, _epnum) \
+	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
+#define	MUSB_EP_OFFSET			MUSB_INDEXED_OFFSET
+#endif
+
+/****************************** FUNCTIONS ********************************/
+
+#define MUSB_HST_MODE(_musb)\
+	{ (_musb)->is_host = true; }
+#define MUSB_DEV_MODE(_musb) \
+	{ (_musb)->is_host = false; }
+
+#define test_devctl_hst_mode(_x) \
+	(musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM)
+
+#define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral")
+
+/******************************** TYPES *************************************/
+
+/*
+ * struct musb_hw_ep - endpoint hardware (bidirectional)
+ *
+ * Ordered slightly for better cacheline locality.
+ */
+struct musb_hw_ep {
+	struct musb		*musb;
+	void __iomem		*fifo;
+	void __iomem		*regs;
+
+#ifdef CONFIG_USB_TUSB6010
+	void __iomem		*conf;
+#endif
+
+	/* index in musb->endpoints[]  */
+	u8			epnum;
+
+	/* hardware configuration, possibly dynamic */
+	bool			is_shared_fifo;
+	bool			tx_double_buffered;
+	bool			rx_double_buffered;
+	u16			max_packet_sz_tx;
+	u16			max_packet_sz_rx;
+
+	struct dma_channel	*tx_channel;
+	struct dma_channel	*rx_channel;
+
+#ifdef CONFIG_USB_TUSB6010
+	/* TUSB has "asynchronous" and "synchronous" dma modes */
+	dma_addr_t		fifo_async;
+	dma_addr_t		fifo_sync;
+	void __iomem		*fifo_sync_va;
+#endif
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	void __iomem		*target_regs;
+
+	/* currently scheduled peripheral endpoint */
+	struct musb_qh		*in_qh;
+	struct musb_qh		*out_qh;
+
+	u8			rx_reinit;
+	u8			tx_reinit;
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	/* peripheral side */
+	struct musb_ep		ep_in;			/* TX */
+	struct musb_ep		ep_out;			/* RX */
+#endif
+};
+
+static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep)
+{
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	return next_request(&hw_ep->ep_in);
+#else
+	return NULL;
+#endif
+}
+
+static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep)
+{
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	return next_request(&hw_ep->ep_out);
+#else
+	return NULL;
+#endif
+}
+
+/*
+ * struct musb - Driver instance data.
+ */
+struct musb {
+	/* device lock */
+	spinlock_t		lock;
+	struct clk		*clock;
+	irqreturn_t		(*isr)(int, void *);
+	struct work_struct	irq_work;
+
+/* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
+#define MUSB_PORT_STAT_RESUME	(1 << 31)
+
+	u32			port1_status;
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	unsigned long		rh_timer;
+
+	enum musb_h_ep0_state	ep0_stage;
+
+	/* bulk traffic normally dedicates endpoint hardware, and each
+	 * direction has its own ring of host side endpoints.
+	 * we try to progress the transfer at the head of each endpoint's
+	 * queue until it completes or NAKs too much; then we try the next
+	 * endpoint.
+	 */
+	struct musb_hw_ep	*bulk_ep;
+
+	struct list_head	control;	/* of musb_qh */
+	struct list_head	in_bulk;	/* of musb_qh */
+	struct list_head	out_bulk;	/* of musb_qh */
+	struct musb_qh		*periodic[32];	/* tree of interrupt+iso */
+#endif
+
+	/* called with IRQs blocked; ON/nonzero implies starting a session,
+	 * and waiting at least a_wait_vrise_tmout.
+	 */
+	void			(*board_set_vbus)(struct musb *, int is_on);
+
+	struct dma_controller	*dma_controller;
+
+	struct device		*controller;
+	void __iomem		*ctrl_base;
+	void __iomem		*mregs;
+
+#ifdef CONFIG_USB_TUSB6010
+	dma_addr_t		async;
+	dma_addr_t		sync;
+	void __iomem		*sync_va;
+#endif
+
+	/* passed down from chip/board specific irq handlers */
+	u8			int_usb;
+	u16			int_rx;
+	u16			int_tx;
+
+	struct otg_transceiver	xceiv;
+
+	int nIrq;
+
+	struct musb_hw_ep	 endpoints[MUSB_C_NUM_EPS];
+#define control_ep		endpoints
+
+#define VBUSERR_RETRY_COUNT	3
+	u16			vbuserr_retry;
+	u16 epmask;
+	u8 nr_endpoints;
+
+	u8 board_mode;		/* enum musb_mode */
+	int			(*board_set_power)(int state);
+
+	int			(*set_clock)(struct clk *clk, int is_active);
+
+	u8			min_power;	/* vbus for periph, in mA/2 */
+
+	bool			is_host;
+
+	int			a_wait_bcon;	/* VBUS timeout in msecs */
+	unsigned long		idle_timeout;	/* Next timeout in jiffies */
+
+	/* active means connected and not suspended */
+	unsigned		is_active:1;
+
+	unsigned is_multipoint:1;
+	unsigned ignore_disconnect:1;	/* during bus resets */
+
+#ifdef C_MP_TX
+	unsigned bulk_split:1;
+#define	can_bulk_split(musb,type) \
+		(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split)
+#else
+#define	can_bulk_split(musb, type)	0
+#endif
+
+#ifdef C_MP_RX
+	unsigned bulk_combine:1;
+#define	can_bulk_combine(musb,type) \
+		(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
+#else
+#define	can_bulk_combine(musb, type)	0
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	/* is_suspended means USB B_PERIPHERAL suspend */
+	unsigned		is_suspended:1;
+
+	/* may_wakeup means remote wakeup is enabled */
+	unsigned		may_wakeup:1;
+
+	/* is_self_powered is reported in device status and the
+	 * config descriptor.  is_bus_powered means B_PERIPHERAL
+	 * draws some VBUS current; both can be true.
+	 */
+	unsigned		is_self_powered:1;
+	unsigned		is_bus_powered:1;
+
+	unsigned		set_address:1;
+	unsigned		test_mode:1;
+	unsigned		softconnect:1;
+
+	u8			address;
+	u8			test_mode_nr;
+	u16			ackpend;		/* ep0 */
+	enum musb_g_ep0_state	ep0_state;
+	struct usb_gadget	g;			/* the gadget */
+	struct usb_gadget_driver *gadget_driver;	/* its driver */
+#endif
+
+	struct musb_hdrc_config	*config;
+
+#ifdef MUSB_CONFIG_PROC_FS
+	struct proc_dir_entry *proc_entry;
+#endif
+};
+
+static inline void musb_set_vbus(struct musb *musb, int is_on)
+{
+	musb->board_set_vbus(musb, is_on);
+}
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+static inline struct musb *gadget_to_musb(struct usb_gadget *g)
+{
+	return container_of(g, struct musb, g);
+}
+#endif
+
+
+/***************************** Glue it together *****************************/
+
+extern const char musb_driver_name[];
+
+extern void musb_start(struct musb *musb);
+extern void musb_stop(struct musb *musb);
+
+extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
+extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
+
+extern void musb_load_testpacket(struct musb *);
+
+extern irqreturn_t musb_interrupt(struct musb *);
+
+extern void musb_platform_enable(struct musb *musb);
+extern void musb_platform_disable(struct musb *musb);
+
+extern void musb_hnp_stop(struct musb *musb);
+
+extern void musb_platform_set_mode(struct musb *musb, u8 musb_mode);
+
+#if defined(CONFIG_USB_TUSB6010) || \
+	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
+#else
+#define musb_platform_try_idle(x, y)		do {} while (0)
+#endif
+
+#ifdef CONFIG_USB_TUSB6010
+extern int musb_platform_get_vbus_status(struct musb *musb);
+#else
+#define musb_platform_get_vbus_status(x)	0
+#endif
+
+extern int __init musb_platform_init(struct musb *musb);
+extern int musb_platform_exit(struct musb *musb);
+
+/*-------------------------- ProcFS definitions ---------------------*/
+
+struct proc_dir_entry;
+
+#if (MUSB_DEBUG > 0) && defined(MUSB_CONFIG_PROC_FS)
+extern struct proc_dir_entry *musb_debug_create(char *name, struct musb *data);
+extern void musb_debug_delete(char *name, struct musb *data);
+
+#else
+static inline struct proc_dir_entry *
+musb_debug_create(char *name, struct musb *data)
+{
+	return NULL;
+}
+static inline void musb_debug_delete(char *name, struct musb *data)
+{
+}
+#endif
+
+#endif	/* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
new file mode 100644
index 00000000000..3bdb311e820
--- /dev/null
+++ b/drivers/usb/musb/musb_debug.h
@@ -0,0 +1,66 @@
+/*
+ * MUSB OTG driver debug defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_LINUX_DEBUG_H__
+#define __MUSB_LINUX_DEBUG_H__
+
+#define yprintk(facility, format, args...) \
+	do { printk(facility "%s %d: " format , \
+	__func__, __LINE__ , ## args); } while (0)
+#define WARNING(fmt, args...) yprintk(KERN_WARNING, fmt, ## args)
+#define INFO(fmt, args...) yprintk(KERN_INFO, fmt, ## args)
+#define ERR(fmt, args...) yprintk(KERN_ERR, fmt, ## args)
+
+#define xprintk(level, facility, format, args...) do { \
+	if (_dbg_level(level)) { \
+		printk(facility "%s %d: " format , \
+				__func__, __LINE__ , ## args); \
+	} } while (0)
+
+#if MUSB_DEBUG > 0
+extern unsigned debug;
+#else
+#define debug	0
+#endif
+
+static inline int _dbg_level(unsigned l)
+{
+	return debug >= l;
+}
+
+#define DBG(level, fmt, args...) xprintk(level, KERN_DEBUG, fmt, ## args)
+
+extern const char *otg_state_string(struct musb *);
+
+#endif				/*  __MUSB_LINUX_DEBUG_H__ */
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
new file mode 100644
index 00000000000..0a2c4e3602c
--- /dev/null
+++ b/drivers/usb/musb/musb_dma.h
@@ -0,0 +1,172 @@
+/*
+ * MUSB OTG driver DMA controller abstraction
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_DMA_H__
+#define __MUSB_DMA_H__
+
+struct musb_hw_ep;
+
+/*
+ * DMA Controller Abstraction
+ *
+ * DMA Controllers are abstracted to allow use of a variety of different
+ * implementations of DMA, as allowed by the Inventra USB cores.  On the
+ * host side, usbcore sets up the DMA mappings and flushes caches; on the
+ * peripheral side, the gadget controller driver does.  Responsibilities
+ * of a DMA controller driver include:
+ *
+ *  - Handling the details of moving multiple USB packets
+ *    in cooperation with the Inventra USB core, including especially
+ *    the correct RX side treatment of short packets and buffer-full
+ *    states (both of which terminate transfers).
+ *
+ *  - Knowing the correlation between dma channels and the
+ *    Inventra core's local endpoint resources and data direction.
+ *
+ *  - Maintaining a list of allocated/available channels.
+ *
+ *  - Updating channel status on interrupts,
+ *    whether shared with the Inventra core or separate.
+ */
+
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+#ifndef CONFIG_MUSB_PIO_ONLY
+#define	is_dma_capable()	(1)
+#else
+#define	is_dma_capable()	(0)
+#endif
+
+#ifdef CONFIG_USB_TI_CPPI_DMA
+#define	is_cppi_enabled()	1
+#else
+#define	is_cppi_enabled()	0
+#endif
+
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+#define tusb_dma_omap()			1
+#else
+#define tusb_dma_omap()			0
+#endif
+
+/*
+ * DMA channel status ... updated by the dma controller driver whenever that
+ * status changes, and protected by the overall controller spinlock.
+ */
+enum dma_channel_status {
+	/* unallocated */
+	MUSB_DMA_STATUS_UNKNOWN,
+	/* allocated ... but not busy, no errors */
+	MUSB_DMA_STATUS_FREE,
+	/* busy ... transactions are active */
+	MUSB_DMA_STATUS_BUSY,
+	/* transaction(s) aborted due to ... dma or memory bus error */
+	MUSB_DMA_STATUS_BUS_ABORT,
+	/* transaction(s) aborted due to ... core error or USB fault */
+	MUSB_DMA_STATUS_CORE_ABORT
+};
+
+struct dma_controller;
+
+/**
+ * struct dma_channel - A DMA channel.
+ * @private_data: channel-private data
+ * @max_len: the maximum number of bytes the channel can move in one
+ *	transaction (typically representing many USB maximum-sized packets)
+ * @actual_len: how many bytes have been transferred
+ * @status: current channel status (updated e.g. on interrupt)
+ * @desired_mode: true if mode 1 is desired; false if mode 0 is desired
+ *
+ * channels are associated with an endpoint for the duration of at least
+ * one usb transfer.
+ */
+struct dma_channel {
+	void			*private_data;
+	/* FIXME not void* private_data, but a dma_controller * */
+	size_t			max_len;
+	size_t			actual_len;
+	enum dma_channel_status	status;
+	bool			desired_mode;
+};
+
+/*
+ * dma_channel_status - return status of dma channel
+ * @c: the channel
+ *
+ * Returns the software's view of the channel status.  If that status is BUSY
+ * then it's possible that the hardware has completed (or aborted) a transfer,
+ * so the driver needs to update that status.
+ */
+static inline enum dma_channel_status
+dma_channel_status(struct dma_channel *c)
+{
+	return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN;
+}
+
+/**
+ * struct dma_controller - A DMA Controller.
+ * @start: call this to start a DMA controller;
+ *	return 0 on success, else negative errno
+ * @stop: call this to stop a DMA controller
+ *	return 0 on success, else negative errno
+ * @channel_alloc: call this to allocate a DMA channel
+ * @channel_release: call this to release a DMA channel
+ * @channel_abort: call this to abort a pending DMA transaction,
+ *	returning it to FREE (but allocated) state
+ *
+ * Controllers manage dma channels.
+ */
+struct dma_controller {
+	int			(*start)(struct dma_controller *);
+	int			(*stop)(struct dma_controller *);
+	struct dma_channel	*(*channel_alloc)(struct dma_controller *,
+					struct musb_hw_ep *, u8 is_tx);
+	void			(*channel_release)(struct dma_channel *);
+	int			(*channel_program)(struct dma_channel *channel,
+							u16 maxpacket, u8 mode,
+							dma_addr_t dma_addr,
+							u32 length);
+	int			(*channel_abort)(struct dma_channel *);
+};
+
+/* called after channel_program(), may indicate a fault */
+extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
+
+
+extern struct dma_controller *__init
+dma_controller_create(struct musb *, void __iomem *);
+
+extern void dma_controller_destroy(struct dma_controller *);
+
+#endif	/* __MUSB_DMA_H__ */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
new file mode 100644
index 00000000000..d6a802c224f
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget.c
@@ -0,0 +1,2031 @@
+/*
+ * MUSB OTG driver peripheral support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/moduleparam.h>
+#include <linux/stat.h>
+#include <linux/dma-mapping.h>
+
+#include "musb_core.h"
+
+
+/* MUSB PERIPHERAL status 3-mar-2006:
+ *
+ * - EP0 seems solid.  It passes both USBCV and usbtest control cases.
+ *   Minor glitches:
+ *
+ *     + remote wakeup to Linux hosts work, but saw USBCV failures;
+ *       in one test run (operator error?)
+ *     + endpoint halt tests -- in both usbtest and usbcv -- seem
+ *       to break when dma is enabled ... is something wrongly
+ *       clearing SENDSTALL?
+ *
+ * - Mass storage behaved ok when last tested.  Network traffic patterns
+ *   (with lots of short transfers etc) need retesting; they turn up the
+ *   worst cases of the DMA, since short packets are typical but are not
+ *   required.
+ *
+ * - TX/IN
+ *     + both pio and dma behave in with network and g_zero tests
+ *     + no cppi throughput issues other than no-hw-queueing
+ *     + failed with FLAT_REG (DaVinci)
+ *     + seems to behave with double buffering, PIO -and- CPPI
+ *     + with gadgetfs + AIO, requests got lost?
+ *
+ * - RX/OUT
+ *     + both pio and dma behave in with network and g_zero tests
+ *     + dma is slow in typical case (short_not_ok is clear)
+ *     + double buffering ok with PIO
+ *     + double buffering *FAILS* with CPPI, wrong data bytes sometimes
+ *     + request lossage observed with gadgetfs
+ *
+ * - ISO not tested ... might work, but only weakly isochronous
+ *
+ * - Gadget driver disabling of softconnect during bind() is ignored; so
+ *   drivers can't hold off host requests until userspace is ready.
+ *   (Workaround:  they can turn it off later.)
+ *
+ * - PORTABILITY (assumes PIO works):
+ *     + DaVinci, basically works with cppi dma
+ *     + OMAP 2430, ditto with mentor dma
+ *     + TUSB 6010, platform-specific dma in the works
+ */
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * Immediately complete a request.
+ *
+ * @param request the request to complete
+ * @param status the status to complete the request with
+ * Context: controller locked, IRQs blocked.
+ */
+void musb_g_giveback(
+	struct musb_ep		*ep,
+	struct usb_request	*request,
+	int			status)
+__releases(ep->musb->lock)
+__acquires(ep->musb->lock)
+{
+	struct musb_request	*req;
+	struct musb		*musb;
+	int			busy = ep->busy;
+
+	req = to_musb_request(request);
+
+	list_del(&request->list);
+	if (req->request.status == -EINPROGRESS)
+		req->request.status = status;
+	musb = req->musb;
+
+	ep->busy = 1;
+	spin_unlock(&musb->lock);
+	if (is_dma_capable()) {
+		if (req->mapped) {
+			dma_unmap_single(musb->controller,
+					req->request.dma,
+					req->request.length,
+					req->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+			req->request.dma = DMA_ADDR_INVALID;
+			req->mapped = 0;
+		} else if (req->request.dma != DMA_ADDR_INVALID)
+			dma_sync_single_for_cpu(musb->controller,
+					req->request.dma,
+					req->request.length,
+					req->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+	}
+	if (request->status == 0)
+		DBG(5, "%s done request %p,  %d/%d\n",
+				ep->end_point.name, request,
+				req->request.actual, req->request.length);
+	else
+		DBG(2, "%s request %p, %d/%d fault %d\n",
+				ep->end_point.name, request,
+				req->request.actual, req->request.length,
+				request->status);
+	req->request.complete(&req->ep->end_point, &req->request);
+	spin_lock(&musb->lock);
+	ep->busy = busy;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * Abort requests queued to an endpoint using the status. Synchronous.
+ * caller locked controller and blocked irqs, and selected this ep.
+ */
+static void nuke(struct musb_ep *ep, const int status)
+{
+	struct musb_request	*req = NULL;
+	void __iomem *epio = ep->musb->endpoints[ep->current_epnum].regs;
+
+	ep->busy = 1;
+
+	if (is_dma_capable() && ep->dma) {
+		struct dma_controller	*c = ep->musb->dma_controller;
+		int value;
+		if (ep->is_in) {
+			musb_writew(epio, MUSB_TXCSR,
+					0 | MUSB_TXCSR_FLUSHFIFO);
+			musb_writew(epio, MUSB_TXCSR,
+					0 | MUSB_TXCSR_FLUSHFIFO);
+		} else {
+			musb_writew(epio, MUSB_RXCSR,
+					0 | MUSB_RXCSR_FLUSHFIFO);
+			musb_writew(epio, MUSB_RXCSR,
+					0 | MUSB_RXCSR_FLUSHFIFO);
+		}
+
+		value = c->channel_abort(ep->dma);
+		DBG(value ? 1 : 6, "%s: abort DMA --> %d\n", ep->name, value);
+		c->channel_release(ep->dma);
+		ep->dma = NULL;
+	}
+
+	while (!list_empty(&(ep->req_list))) {
+		req = container_of(ep->req_list.next, struct musb_request,
+				request.list);
+		musb_g_giveback(ep, &req->request, status);
+	}
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* Data transfers - pure PIO, pure DMA, or mixed mode */
+
+/*
+ * This assumes the separate CPPI engine is responding to DMA requests
+ * from the usb core ... sequenced a bit differently from mentor dma.
+ */
+
+static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
+{
+	if (can_bulk_split(musb, ep->type))
+		return ep->hw_ep->max_packet_sz_tx;
+	else
+		return ep->packet_sz;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Peripheral tx (IN) using Mentor DMA works as follows:
+	Only mode 0 is used for transfers <= wPktSize,
+	mode 1 is used for larger transfers,
+
+	One of the following happens:
+	- Host sends IN token which causes an endpoint interrupt
+		-> TxAvail
+			-> if DMA is currently busy, exit.
+			-> if queue is non-empty, txstate().
+
+	- Request is queued by the gadget driver.
+		-> if queue was previously empty, txstate()
+
+	txstate()
+		-> start
+		  /\	-> setup DMA
+		  |     (data is transferred to the FIFO, then sent out when
+		  |	IN token(s) are recd from Host.
+		  |		-> DMA interrupt on completion
+		  |		   calls TxAvail.
+		  |		      -> stop DMA, ~DmaEenab,
+		  |		      -> set TxPktRdy for last short pkt or zlp
+		  |		      -> Complete Request
+		  |		      -> Continue next request (call txstate)
+		  |___________________________________|
+
+ * Non-Mentor DMA engines can of course work differently, such as by
+ * upleveling from irq-per-packet to irq-per-buffer.
+ */
+
+#endif
+
+/*
+ * An endpoint is transmitting data. This can be called either from
+ * the IRQ routine or from ep.queue() to kickstart a request on an
+ * endpoint.
+ *
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void txstate(struct musb *musb, struct musb_request *req)
+{
+	u8			epnum = req->epnum;
+	struct musb_ep		*musb_ep;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct usb_request	*request;
+	u16			fifo_count = 0, csr;
+	int			use_dma = 0;
+
+	musb_ep = req->ep;
+
+	/* we shouldn't get here while DMA is active ... but we do ... */
+	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
+		DBG(4, "dma pending...\n");
+		return;
+	}
+
+	/* read TXCSR before */
+	csr = musb_readw(epio, MUSB_TXCSR);
+
+	request = &req->request;
+	fifo_count = min(max_ep_writesize(musb, musb_ep),
+			(int)(request->length - request->actual));
+
+	if (csr & MUSB_TXCSR_TXPKTRDY) {
+		DBG(5, "%s old packet still ready , txcsr %03x\n",
+				musb_ep->end_point.name, csr);
+		return;
+	}
+
+	if (csr & MUSB_TXCSR_P_SENDSTALL) {
+		DBG(5, "%s stalling, txcsr %03x\n",
+				musb_ep->end_point.name, csr);
+		return;
+	}
+
+	DBG(4, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x\n",
+			epnum, musb_ep->packet_sz, fifo_count,
+			csr);
+
+#ifndef	CONFIG_MUSB_PIO_ONLY
+	if (is_dma_capable() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		use_dma = (request->dma != DMA_ADDR_INVALID);
+
+		/* MUSB_TXCSR_P_ISO is still set correctly */
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+		{
+			size_t request_size;
+
+			/* setup DMA, then program endpoint CSR */
+			request_size = min(request->length,
+						musb_ep->dma->max_len);
+			if (request_size <= musb_ep->packet_sz)
+				musb_ep->dma->desired_mode = 0;
+			else
+				musb_ep->dma->desired_mode = 1;
+
+			use_dma = use_dma && c->channel_program(
+					musb_ep->dma, musb_ep->packet_sz,
+					musb_ep->dma->desired_mode,
+					request->dma, request_size);
+			if (use_dma) {
+				if (musb_ep->dma->desired_mode == 0) {
+					/* ASSERT: DMAENAB is clear */
+					csr &= ~(MUSB_TXCSR_AUTOSET |
+							MUSB_TXCSR_DMAMODE);
+					csr |= (MUSB_TXCSR_DMAENAB |
+							MUSB_TXCSR_MODE);
+					/* against programming guide */
+				} else
+					csr |= (MUSB_TXCSR_AUTOSET
+							| MUSB_TXCSR_DMAENAB
+							| MUSB_TXCSR_DMAMODE
+							| MUSB_TXCSR_MODE);
+
+				csr &= ~MUSB_TXCSR_P_UNDERRUN;
+				musb_writew(epio, MUSB_TXCSR, csr);
+			}
+		}
+
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+		/* program endpoint CSR first, then setup DMA */
+		csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAMODE
+				| MUSB_TXCSR_P_UNDERRUN
+				| MUSB_TXCSR_TXPKTRDY);
+		csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
+		musb_writew(epio, MUSB_TXCSR,
+			(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
+				| csr);
+
+		/* ensure writebuffer is empty */
+		csr = musb_readw(epio, MUSB_TXCSR);
+
+		/* NOTE host side sets DMAENAB later than this; both are
+		 * OK since the transfer dma glue (between CPPI and Mentor
+		 * fifos) just tells CPPI it could start.  Data only moves
+		 * to the USB TX fifo when both fifos are ready.
+		 */
+
+		/* "mode" is irrelevant here; handle terminating ZLPs like
+		 * PIO does, since the hardware RNDIS mode seems unreliable
+		 * except for the last-packet-is-already-short case.
+		 */
+		use_dma = use_dma && c->channel_program(
+				musb_ep->dma, musb_ep->packet_sz,
+				0,
+				request->dma,
+				request->length);
+		if (!use_dma) {
+			c->channel_release(musb_ep->dma);
+			musb_ep->dma = NULL;
+			/* ASSERT: DMAENAB clear */
+			csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+			/* invariant: prequest->buf is non-null */
+		}
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+		use_dma = use_dma && c->channel_program(
+				musb_ep->dma, musb_ep->packet_sz,
+				request->zero,
+				request->dma,
+				request->length);
+#endif
+	}
+#endif
+
+	if (!use_dma) {
+		musb_write_fifo(musb_ep->hw_ep, fifo_count,
+				(u8 *) (request->buf + request->actual));
+		request->actual += fifo_count;
+		csr |= MUSB_TXCSR_TXPKTRDY;
+		csr &= ~MUSB_TXCSR_P_UNDERRUN;
+		musb_writew(epio, MUSB_TXCSR, csr);
+	}
+
+	/* host may already have the data when this message shows... */
+	DBG(3, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d\n",
+			musb_ep->end_point.name, use_dma ? "dma" : "pio",
+			request->actual, request->length,
+			musb_readw(epio, MUSB_TXCSR),
+			fifo_count,
+			musb_readw(epio, MUSB_TXMAXP));
+}
+
+/*
+ * FIFO state update (e.g. data ready).
+ * Called from IRQ,  with controller locked.
+ */
+void musb_g_tx(struct musb *musb, u8 epnum)
+{
+	u16			csr;
+	struct usb_request	*request;
+	u8 __iomem		*mbase = musb->mregs;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_in;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+	request = next_request(musb_ep);
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	DBG(4, "<== %s, txcsr %04x\n", musb_ep->end_point.name, csr);
+
+	dma = is_dma_capable() ? musb_ep->dma : NULL;
+	do {
+		/* REVISIT for high bandwidth, MUSB_TXCSR_P_INCOMPTX
+		 * probably rates reporting as a host error
+		 */
+		if (csr & MUSB_TXCSR_P_SENTSTALL) {
+			csr |= MUSB_TXCSR_P_WZC_BITS;
+			csr &= ~MUSB_TXCSR_P_SENTSTALL;
+			musb_writew(epio, MUSB_TXCSR, csr);
+			if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+				dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+				musb->dma_controller->channel_abort(dma);
+			}
+
+			if (request)
+				musb_g_giveback(musb_ep, request, -EPIPE);
+
+			break;
+		}
+
+		if (csr & MUSB_TXCSR_P_UNDERRUN) {
+			/* we NAKed, no big deal ... little reason to care */
+			csr |= MUSB_TXCSR_P_WZC_BITS;
+			csr &= ~(MUSB_TXCSR_P_UNDERRUN
+					| MUSB_TXCSR_TXPKTRDY);
+			musb_writew(epio, MUSB_TXCSR, csr);
+			DBG(20, "underrun on ep%d, req %p\n", epnum, request);
+		}
+
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			/* SHOULD NOT HAPPEN ... has with cppi though, after
+			 * changing SENDSTALL (and other cases); harmless?
+			 */
+			DBG(5, "%s dma still busy?\n", musb_ep->end_point.name);
+			break;
+		}
+
+		if (request) {
+			u8	is_dma = 0;
+
+			if (dma && (csr & MUSB_TXCSR_DMAENAB)) {
+				is_dma = 1;
+				csr |= MUSB_TXCSR_P_WZC_BITS;
+				csr &= ~(MUSB_TXCSR_DMAENAB
+						| MUSB_TXCSR_P_UNDERRUN
+						| MUSB_TXCSR_TXPKTRDY);
+				musb_writew(epio, MUSB_TXCSR, csr);
+				/* ensure writebuffer is empty */
+				csr = musb_readw(epio, MUSB_TXCSR);
+				request->actual += musb_ep->dma->actual_len;
+				DBG(4, "TXCSR%d %04x, dma off, "
+						"len %zu, req %p\n",
+					epnum, csr,
+					musb_ep->dma->actual_len,
+					request);
+			}
+
+			if (is_dma || request->actual == request->length) {
+
+				/* First, maybe a terminating short packet.
+				 * Some DMA engines might handle this by
+				 * themselves.
+				 */
+				if ((request->zero
+						&& request->length
+						&& (request->length
+							% musb_ep->packet_sz)
+							== 0)
+#ifdef CONFIG_USB_INVENTRA_DMA
+					|| (is_dma &&
+						((!dma->desired_mode) ||
+						    (request->actual &
+						    (musb_ep->packet_sz - 1))))
+#endif
+				) {
+					/* on dma completion, fifo may not
+					 * be available yet ...
+					 */
+					if (csr & MUSB_TXCSR_TXPKTRDY)
+						break;
+
+					DBG(4, "sending zero pkt\n");
+					musb_writew(epio, MUSB_TXCSR,
+							MUSB_TXCSR_MODE
+							| MUSB_TXCSR_TXPKTRDY);
+					request->zero = 0;
+				}
+
+				/* ... or if not, then complete it */
+				musb_g_giveback(musb_ep, request, 0);
+
+				/* kickstart next transfer if appropriate;
+				 * the packet that just completed might not
+				 * be transmitted for hours or days.
+				 * REVISIT for double buffering...
+				 * FIXME revisit for stalls too...
+				 */
+				musb_ep_select(mbase, epnum);
+				csr = musb_readw(epio, MUSB_TXCSR);
+				if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+					break;
+				request = musb_ep->desc
+						? next_request(musb_ep)
+						: NULL;
+				if (!request) {
+					DBG(4, "%s idle now\n",
+						musb_ep->end_point.name);
+					break;
+				}
+			}
+
+			txstate(musb, to_musb_request(request));
+		}
+
+	} while (0);
+}
+
+/* ------------------------------------------------------------ */
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Peripheral rx (OUT) using Mentor DMA works as follows:
+	- Only mode 0 is used.
+
+	- Request is queued by the gadget class driver.
+		-> if queue was previously empty, rxstate()
+
+	- Host sends OUT token which causes an endpoint interrupt
+	  /\      -> RxReady
+	  |	      -> if request queued, call rxstate
+	  |		/\	-> setup DMA
+	  |		|	     -> DMA interrupt on completion
+	  |		|		-> RxReady
+	  |		|		      -> stop DMA
+	  |		|		      -> ack the read
+	  |		|		      -> if data recd = max expected
+	  |		|				by the request, or host
+	  |		|				sent a short packet,
+	  |		|				complete the request,
+	  |		|				and start the next one.
+	  |		|_____________________________________|
+	  |					 else just wait for the host
+	  |					    to send the next OUT token.
+	  |__________________________________________________|
+
+ * Non-Mentor DMA engines can of course work differently.
+ */
+
+#endif
+
+/*
+ * Context: controller locked, IRQs blocked, endpoint selected
+ */
+static void rxstate(struct musb *musb, struct musb_request *req)
+{
+	u16			csr = 0;
+	const u8		epnum = req->epnum;
+	struct usb_request	*request = &req->request;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	u16			fifo_count = 0;
+	u16			len = musb_ep->packet_sz;
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+
+	if (is_cppi_enabled() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+		struct dma_channel	*channel = musb_ep->dma;
+
+		/* NOTE:  CPPI won't actually stop advancing the DMA
+		 * queue after short packet transfers, so this is almost
+		 * always going to run as IRQ-per-packet DMA so that
+		 * faults will be handled correctly.
+		 */
+		if (c->channel_program(channel,
+				musb_ep->packet_sz,
+				!request->short_not_ok,
+				request->dma + request->actual,
+				request->length - request->actual)) {
+
+			/* make sure that if an rxpkt arrived after the irq,
+			 * the cppi engine will be ready to take it as soon
+			 * as DMA is enabled
+			 */
+			csr &= ~(MUSB_RXCSR_AUTOCLEAR
+					| MUSB_RXCSR_DMAMODE);
+			csr |= MUSB_RXCSR_DMAENAB | MUSB_RXCSR_P_WZC_BITS;
+			musb_writew(epio, MUSB_RXCSR, csr);
+			return;
+		}
+	}
+
+	if (csr & MUSB_RXCSR_RXPKTRDY) {
+		len = musb_readw(epio, MUSB_RXCOUNT);
+		if (request->actual < request->length) {
+#ifdef CONFIG_USB_INVENTRA_DMA
+			if (is_dma_capable() && musb_ep->dma) {
+				struct dma_controller	*c;
+				struct dma_channel	*channel;
+				int			use_dma = 0;
+
+				c = musb->dma_controller;
+				channel = musb_ep->dma;
+
+	/* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+	 * mode 0 only. So we do not get endpoint interrupts due to DMA
+	 * completion. We only get interrupts from DMA controller.
+	 *
+	 * We could operate in DMA mode 1 if we knew the size of the tranfer
+	 * in advance. For mass storage class, request->length = what the host
+	 * sends, so that'd work.  But for pretty much everything else,
+	 * request->length is routinely more than what the host sends. For
+	 * most these gadgets, end of is signified either by a short packet,
+	 * or filling the last byte of the buffer.  (Sending extra data in
+	 * that last pckate should trigger an overflow fault.)  But in mode 1,
+	 * we don't get DMA completion interrrupt for short packets.
+	 *
+	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+	 * to get endpoint interrupt on every DMA req, but that didn't seem
+	 * to work reliably.
+	 *
+	 * REVISIT an updated g_file_storage can set req->short_not_ok, which
+	 * then becomes usable as a runtime "use mode 1" hint...
+	 */
+
+				csr |= MUSB_RXCSR_DMAENAB;
+#ifdef USE_MODE1
+				csr |= MUSB_RXCSR_AUTOCLEAR;
+				/* csr |= MUSB_RXCSR_DMAMODE; */
+
+				/* this special sequence (enabling and then
+				 * disabling MUSB_RXCSR_DMAMODE) is required
+				 * to get DMAReq to activate
+				 */
+				musb_writew(epio, MUSB_RXCSR,
+					csr | MUSB_RXCSR_DMAMODE);
+#endif
+				musb_writew(epio, MUSB_RXCSR, csr);
+
+				if (request->actual < request->length) {
+					int transfer_size = 0;
+#ifdef USE_MODE1
+					transfer_size = min(request->length,
+							channel->max_len);
+#else
+					transfer_size = len;
+#endif
+					if (transfer_size <= musb_ep->packet_sz)
+						musb_ep->dma->desired_mode = 0;
+					else
+						musb_ep->dma->desired_mode = 1;
+
+					use_dma = c->channel_program(
+							channel,
+							musb_ep->packet_sz,
+							channel->desired_mode,
+							request->dma
+							+ request->actual,
+							transfer_size);
+				}
+
+				if (use_dma)
+					return;
+			}
+#endif	/* Mentor's DMA */
+
+			fifo_count = request->length - request->actual;
+			DBG(3, "%s OUT/RX pio fifo %d/%d, maxpacket %d\n",
+					musb_ep->end_point.name,
+					len, fifo_count,
+					musb_ep->packet_sz);
+
+			fifo_count = min(len, fifo_count);
+
+#ifdef	CONFIG_USB_TUSB_OMAP_DMA
+			if (tusb_dma_omap() && musb_ep->dma) {
+				struct dma_controller *c = musb->dma_controller;
+				struct dma_channel *channel = musb_ep->dma;
+				u32 dma_addr = request->dma + request->actual;
+				int ret;
+
+				ret = c->channel_program(channel,
+						musb_ep->packet_sz,
+						channel->desired_mode,
+						dma_addr,
+						fifo_count);
+				if (ret)
+					return;
+			}
+#endif
+
+			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
+					(request->buf + request->actual));
+			request->actual += fifo_count;
+
+			/* REVISIT if we left anything in the fifo, flush
+			 * it and report -EOVERFLOW
+			 */
+
+			/* ack the read! */
+			csr |= MUSB_RXCSR_P_WZC_BITS;
+			csr &= ~MUSB_RXCSR_RXPKTRDY;
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+	}
+
+	/* reach the end or short packet detected */
+	if (request->actual == request->length || len < musb_ep->packet_sz)
+		musb_g_giveback(musb_ep, request, 0);
+}
+
+/*
+ * Data ready for a request; called from IRQ
+ */
+void musb_g_rx(struct musb *musb, u8 epnum)
+{
+	u16			csr;
+	struct usb_request	*request;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+
+	request = next_request(musb_ep);
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+	dma = is_dma_capable() ? musb_ep->dma : NULL;
+
+	DBG(4, "<== %s, rxcsr %04x%s %p\n", musb_ep->end_point.name,
+			csr, dma ? " (dma)" : "", request);
+
+	if (csr & MUSB_RXCSR_P_SENTSTALL) {
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			request->actual += musb_ep->dma->actual_len;
+		}
+
+		csr |= MUSB_RXCSR_P_WZC_BITS;
+		csr &= ~MUSB_RXCSR_P_SENTSTALL;
+		musb_writew(epio, MUSB_RXCSR, csr);
+
+		if (request)
+			musb_g_giveback(musb_ep, request, -EPIPE);
+		goto done;
+	}
+
+	if (csr & MUSB_RXCSR_P_OVERRUN) {
+		/* csr |= MUSB_RXCSR_P_WZC_BITS; */
+		csr &= ~MUSB_RXCSR_P_OVERRUN;
+		musb_writew(epio, MUSB_RXCSR, csr);
+
+		DBG(3, "%s iso overrun on %p\n", musb_ep->name, request);
+		if (request && request->status == -EINPROGRESS)
+			request->status = -EOVERFLOW;
+	}
+	if (csr & MUSB_RXCSR_INCOMPRX) {
+		/* REVISIT not necessarily an error */
+		DBG(4, "%s, incomprx\n", musb_ep->end_point.name);
+	}
+
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		/* "should not happen"; likely RXPKTRDY pending for DMA */
+		DBG((csr & MUSB_RXCSR_DMAENAB) ? 4 : 1,
+			"%s busy, csr %04x\n",
+			musb_ep->end_point.name, csr);
+		goto done;
+	}
+
+	if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
+		csr &= ~(MUSB_RXCSR_AUTOCLEAR
+				| MUSB_RXCSR_DMAENAB
+				| MUSB_RXCSR_DMAMODE);
+		musb_writew(epio, MUSB_RXCSR,
+			MUSB_RXCSR_P_WZC_BITS | csr);
+
+		request->actual += musb_ep->dma->actual_len;
+
+		DBG(4, "RXCSR%d %04x, dma off, %04x, len %zu, req %p\n",
+			epnum, csr,
+			musb_readw(epio, MUSB_RXCSR),
+			musb_ep->dma->actual_len, request);
+
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
+		/* Autoclear doesn't clear RxPktRdy for short packets */
+		if ((dma->desired_mode == 0)
+				|| (dma->actual_len
+					& (musb_ep->packet_sz - 1))) {
+			/* ack the read! */
+			csr &= ~MUSB_RXCSR_RXPKTRDY;
+			musb_writew(epio, MUSB_RXCSR, csr);
+		}
+
+		/* incomplete, and not short? wait for next IN packet */
+		if ((request->actual < request->length)
+				&& (musb_ep->dma->actual_len
+					== musb_ep->packet_sz))
+			goto done;
+#endif
+		musb_g_giveback(musb_ep, request, 0);
+
+		request = next_request(musb_ep);
+		if (!request)
+			goto done;
+
+		/* don't start more i/o till the stall clears */
+		musb_ep_select(mbase, epnum);
+		csr = musb_readw(epio, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_P_SENDSTALL)
+			goto done;
+	}
+
+
+	/* analyze request if the ep is hot */
+	if (request)
+		rxstate(musb, to_musb_request(request));
+	else
+		DBG(3, "packet waiting for %s%s request\n",
+				musb_ep->desc ? "" : "inactive ",
+				musb_ep->end_point.name);
+
+done:
+	return;
+}
+
+/* ------------------------------------------------------------ */
+
+static int musb_gadget_enable(struct usb_ep *ep,
+			const struct usb_endpoint_descriptor *desc)
+{
+	unsigned long		flags;
+	struct musb_ep		*musb_ep;
+	struct musb_hw_ep	*hw_ep;
+	void __iomem		*regs;
+	struct musb		*musb;
+	void __iomem	*mbase;
+	u8		epnum;
+	u16		csr;
+	unsigned	tmp;
+	int		status = -EINVAL;
+
+	if (!ep || !desc)
+		return -EINVAL;
+
+	musb_ep = to_musb_ep(ep);
+	hw_ep = musb_ep->hw_ep;
+	regs = hw_ep->regs;
+	musb = musb_ep->musb;
+	mbase = musb->mregs;
+	epnum = musb_ep->current_epnum;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb_ep->desc) {
+		status = -EBUSY;
+		goto fail;
+	}
+	musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+	/* check direction and (later) maxpacket size against endpoint */
+	if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
+		goto fail;
+
+	/* REVISIT this rules out high bandwidth periodic transfers */
+	tmp = le16_to_cpu(desc->wMaxPacketSize);
+	if (tmp & ~0x07ff)
+		goto fail;
+	musb_ep->packet_sz = tmp;
+
+	/* enable the interrupts for the endpoint, set the endpoint
+	 * packet size (or fail), set the mode, clear the fifo
+	 */
+	musb_ep_select(mbase, epnum);
+	if (desc->bEndpointAddress & USB_DIR_IN) {
+		u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
+
+		if (hw_ep->is_shared_fifo)
+			musb_ep->is_in = 1;
+		if (!musb_ep->is_in)
+			goto fail;
+		if (tmp > hw_ep->max_packet_sz_tx)
+			goto fail;
+
+		int_txe |= (1 << epnum);
+		musb_writew(mbase, MUSB_INTRTXE, int_txe);
+
+		/* REVISIT if can_bulk_split(), use by updating "tmp";
+		 * likewise high bandwidth periodic tx
+		 */
+		musb_writew(regs, MUSB_TXMAXP, tmp);
+
+		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
+		if (musb_readw(regs, MUSB_TXCSR)
+				& MUSB_TXCSR_FIFONOTEMPTY)
+			csr |= MUSB_TXCSR_FLUSHFIFO;
+		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+			csr |= MUSB_TXCSR_P_ISO;
+
+		/* set twice in case of double buffering */
+		musb_writew(regs, MUSB_TXCSR, csr);
+		/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+		musb_writew(regs, MUSB_TXCSR, csr);
+
+	} else {
+		u16 int_rxe = musb_readw(mbase, MUSB_INTRRXE);
+
+		if (hw_ep->is_shared_fifo)
+			musb_ep->is_in = 0;
+		if (musb_ep->is_in)
+			goto fail;
+		if (tmp > hw_ep->max_packet_sz_rx)
+			goto fail;
+
+		int_rxe |= (1 << epnum);
+		musb_writew(mbase, MUSB_INTRRXE, int_rxe);
+
+		/* REVISIT if can_bulk_combine() use by updating "tmp"
+		 * likewise high bandwidth periodic rx
+		 */
+		musb_writew(regs, MUSB_RXMAXP, tmp);
+
+		/* force shared fifo to OUT-only mode */
+		if (hw_ep->is_shared_fifo) {
+			csr = musb_readw(regs, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY);
+			musb_writew(regs, MUSB_TXCSR, csr);
+		}
+
+		csr = MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_CLRDATATOG;
+		if (musb_ep->type == USB_ENDPOINT_XFER_ISOC)
+			csr |= MUSB_RXCSR_P_ISO;
+		else if (musb_ep->type == USB_ENDPOINT_XFER_INT)
+			csr |= MUSB_RXCSR_DISNYET;
+
+		/* set twice in case of double buffering */
+		musb_writew(regs, MUSB_RXCSR, csr);
+		musb_writew(regs, MUSB_RXCSR, csr);
+	}
+
+	/* NOTE:  all the I/O code _should_ work fine without DMA, in case
+	 * for some reason you run out of channels here.
+	 */
+	if (is_dma_capable() && musb->dma_controller) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		musb_ep->dma = c->channel_alloc(c, hw_ep,
+				(desc->bEndpointAddress & USB_DIR_IN));
+	} else
+		musb_ep->dma = NULL;
+
+	musb_ep->desc = desc;
+	musb_ep->busy = 0;
+	status = 0;
+
+	pr_debug("%s periph: enabled %s for %s %s, %smaxpacket %d\n",
+			musb_driver_name, musb_ep->end_point.name,
+			({ char *s; switch (musb_ep->type) {
+			case USB_ENDPOINT_XFER_BULK:	s = "bulk"; break;
+			case USB_ENDPOINT_XFER_INT:	s = "int"; break;
+			default:			s = "iso"; break;
+			}; s; }),
+			musb_ep->is_in ? "IN" : "OUT",
+			musb_ep->dma ? "dma, " : "",
+			musb_ep->packet_sz);
+
+	schedule_work(&musb->irq_work);
+
+fail:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+/*
+ * Disable an endpoint flushing all requests queued.
+ */
+static int musb_gadget_disable(struct usb_ep *ep)
+{
+	unsigned long	flags;
+	struct musb	*musb;
+	u8		epnum;
+	struct musb_ep	*musb_ep;
+	void __iomem	*epio;
+	int		status = 0;
+
+	musb_ep = to_musb_ep(ep);
+	musb = musb_ep->musb;
+	epnum = musb_ep->current_epnum;
+	epio = musb->endpoints[epnum].regs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_ep_select(musb->mregs, epnum);
+
+	/* zero the endpoint sizes */
+	if (musb_ep->is_in) {
+		u16 int_txe = musb_readw(musb->mregs, MUSB_INTRTXE);
+		int_txe &= ~(1 << epnum);
+		musb_writew(musb->mregs, MUSB_INTRTXE, int_txe);
+		musb_writew(epio, MUSB_TXMAXP, 0);
+	} else {
+		u16 int_rxe = musb_readw(musb->mregs, MUSB_INTRRXE);
+		int_rxe &= ~(1 << epnum);
+		musb_writew(musb->mregs, MUSB_INTRRXE, int_rxe);
+		musb_writew(epio, MUSB_RXMAXP, 0);
+	}
+
+	musb_ep->desc = NULL;
+
+	/* abort all pending DMA and requests */
+	nuke(musb_ep, -ESHUTDOWN);
+
+	schedule_work(&musb->irq_work);
+
+	spin_unlock_irqrestore(&(musb->lock), flags);
+
+	DBG(2, "%s\n", musb_ep->end_point.name);
+
+	return status;
+}
+
+/*
+ * Allocate a request for an endpoint.
+ * Reused by ep0 code.
+ */
+struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	struct musb_request	*request = NULL;
+
+	request = kzalloc(sizeof *request, gfp_flags);
+	if (request) {
+		INIT_LIST_HEAD(&request->request.list);
+		request->request.dma = DMA_ADDR_INVALID;
+		request->epnum = musb_ep->current_epnum;
+		request->ep = musb_ep;
+	}
+
+	return &request->request;
+}
+
+/*
+ * Free a request
+ * Reused by ep0 code.
+ */
+void musb_free_request(struct usb_ep *ep, struct usb_request *req)
+{
+	kfree(to_musb_request(req));
+}
+
+static LIST_HEAD(buffers);
+
+struct free_record {
+	struct list_head	list;
+	struct device		*dev;
+	unsigned		bytes;
+	dma_addr_t		dma;
+};
+
+/*
+ * Context: controller locked, IRQs blocked.
+ */
+static void musb_ep_restart(struct musb *musb, struct musb_request *req)
+{
+	DBG(3, "<== %s request %p len %u on hw_ep%d\n",
+		req->tx ? "TX/IN" : "RX/OUT",
+		&req->request, req->request.length, req->epnum);
+
+	musb_ep_select(musb->mregs, req->epnum);
+	if (req->tx)
+		txstate(musb, req);
+	else
+		rxstate(musb, req);
+}
+
+static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
+			gfp_t gfp_flags)
+{
+	struct musb_ep		*musb_ep;
+	struct musb_request	*request;
+	struct musb		*musb;
+	int			status = 0;
+	unsigned long		lockflags;
+
+	if (!ep || !req)
+		return -EINVAL;
+	if (!req->buf)
+		return -ENODATA;
+
+	musb_ep = to_musb_ep(ep);
+	musb = musb_ep->musb;
+
+	request = to_musb_request(req);
+	request->musb = musb;
+
+	if (request->ep != musb_ep)
+		return -EINVAL;
+
+	DBG(4, "<== to %s request=%p\n", ep->name, req);
+
+	/* request is mine now... */
+	request->request.actual = 0;
+	request->request.status = -EINPROGRESS;
+	request->epnum = musb_ep->current_epnum;
+	request->tx = musb_ep->is_in;
+
+	if (is_dma_capable() && musb_ep->dma) {
+		if (request->request.dma == DMA_ADDR_INVALID) {
+			request->request.dma = dma_map_single(
+					musb->controller,
+					request->request.buf,
+					request->request.length,
+					request->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+			request->mapped = 1;
+		} else {
+			dma_sync_single_for_device(musb->controller,
+					request->request.dma,
+					request->request.length,
+					request->tx
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+			request->mapped = 0;
+		}
+	} else if (!req->buf) {
+		return -ENODATA;
+	} else
+		request->mapped = 0;
+
+	spin_lock_irqsave(&musb->lock, lockflags);
+
+	/* don't queue if the ep is down */
+	if (!musb_ep->desc) {
+		DBG(4, "req %p queued to %s while ep %s\n",
+				req, ep->name, "disabled");
+		status = -ESHUTDOWN;
+		goto cleanup;
+	}
+
+	/* add request to the list */
+	list_add_tail(&(request->request.list), &(musb_ep->req_list));
+
+	/* it this is the head of the queue, start i/o ... */
+	if (!musb_ep->busy && &request->request.list == musb_ep->req_list.next)
+		musb_ep_restart(musb, request);
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, lockflags);
+	return status;
+}
+
+static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	struct usb_request	*r;
+	unsigned long		flags;
+	int			status = 0;
+	struct musb		*musb = musb_ep->musb;
+
+	if (!ep || !request || to_musb_request(request)->ep != musb_ep)
+		return -EINVAL;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	list_for_each_entry(r, &musb_ep->req_list, list) {
+		if (r == request)
+			break;
+	}
+	if (r != request) {
+		DBG(3, "request %p not queued to %s\n", request, ep->name);
+		status = -EINVAL;
+		goto done;
+	}
+
+	/* if the hardware doesn't have the request, easy ... */
+	if (musb_ep->req_list.next != &request->list || musb_ep->busy)
+		musb_g_giveback(musb_ep, request, -ECONNRESET);
+
+	/* ... else abort the dma transfer ... */
+	else if (is_dma_capable() && musb_ep->dma) {
+		struct dma_controller	*c = musb->dma_controller;
+
+		musb_ep_select(musb->mregs, musb_ep->current_epnum);
+		if (c->channel_abort)
+			status = c->channel_abort(musb_ep->dma);
+		else
+			status = -EBUSY;
+		if (status == 0)
+			musb_g_giveback(musb_ep, request, -ECONNRESET);
+	} else {
+		/* NOTE: by sticking to easily tested hardware/driver states,
+		 * we leave counting of in-flight packets imprecise.
+		 */
+		musb_g_giveback(musb_ep, request, -ECONNRESET);
+	}
+
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+/*
+ * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any
+ * data but will queue requests.
+ *
+ * exported to ep0 code
+ */
+int musb_gadget_set_halt(struct usb_ep *ep, int value)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	u8			epnum = musb_ep->current_epnum;
+	struct musb		*musb = musb_ep->musb;
+	void __iomem		*epio = musb->endpoints[epnum].regs;
+	void __iomem		*mbase;
+	unsigned long		flags;
+	u16			csr;
+	struct musb_request	*request = NULL;
+	int			status = 0;
+
+	if (!ep)
+		return -EINVAL;
+	mbase = musb->mregs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if ((USB_ENDPOINT_XFER_ISOC == musb_ep->type)) {
+		status = -EINVAL;
+		goto done;
+	}
+
+	musb_ep_select(mbase, epnum);
+
+	/* cannot portably stall with non-empty FIFO */
+	request = to_musb_request(next_request(musb_ep));
+	if (value && musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+			DBG(3, "%s fifo busy, cannot halt\n", ep->name);
+			spin_unlock_irqrestore(&musb->lock, flags);
+			return -EAGAIN;
+		}
+
+	}
+
+	/* set/clear the stall and toggle bits */
+	DBG(2, "%s: %s stall\n", ep->name, value ? "set" : "clear");
+	if (musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+			csr |= MUSB_TXCSR_FLUSHFIFO;
+		csr |= MUSB_TXCSR_P_WZC_BITS
+			| MUSB_TXCSR_CLRDATATOG;
+		if (value)
+			csr |= MUSB_TXCSR_P_SENDSTALL;
+		else
+			csr &= ~(MUSB_TXCSR_P_SENDSTALL
+				| MUSB_TXCSR_P_SENTSTALL);
+		csr &= ~MUSB_TXCSR_TXPKTRDY;
+		musb_writew(epio, MUSB_TXCSR, csr);
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_P_WZC_BITS
+			| MUSB_RXCSR_FLUSHFIFO
+			| MUSB_RXCSR_CLRDATATOG;
+		if (value)
+			csr |= MUSB_RXCSR_P_SENDSTALL;
+		else
+			csr &= ~(MUSB_RXCSR_P_SENDSTALL
+				| MUSB_RXCSR_P_SENTSTALL);
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+done:
+
+	/* maybe start the first request in the queue */
+	if (!musb_ep->busy && !value && request) {
+		DBG(3, "restarting the request\n");
+		musb_ep_restart(musb, request);
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+static int musb_gadget_fifo_status(struct usb_ep *ep)
+{
+	struct musb_ep		*musb_ep = to_musb_ep(ep);
+	void __iomem		*epio = musb_ep->hw_ep->regs;
+	int			retval = -EINVAL;
+
+	if (musb_ep->desc && !musb_ep->is_in) {
+		struct musb		*musb = musb_ep->musb;
+		int			epnum = musb_ep->current_epnum;
+		void __iomem		*mbase = musb->mregs;
+		unsigned long		flags;
+
+		spin_lock_irqsave(&musb->lock, flags);
+
+		musb_ep_select(mbase, epnum);
+		/* FIXME return zero unless RXPKTRDY is set */
+		retval = musb_readw(epio, MUSB_RXCOUNT);
+
+		spin_unlock_irqrestore(&musb->lock, flags);
+	}
+	return retval;
+}
+
+static void musb_gadget_fifo_flush(struct usb_ep *ep)
+{
+	struct musb_ep	*musb_ep = to_musb_ep(ep);
+	struct musb	*musb = musb_ep->musb;
+	u8		epnum = musb_ep->current_epnum;
+	void __iomem	*epio = musb->endpoints[epnum].regs;
+	void __iomem	*mbase;
+	unsigned long	flags;
+	u16		csr, int_txe;
+
+	mbase = musb->mregs;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	musb_ep_select(mbase, (u8) epnum);
+
+	/* disable interrupts */
+	int_txe = musb_readw(mbase, MUSB_INTRTXE);
+	musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+
+	if (musb_ep->is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+			csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS;
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
+			musb_writew(epio, MUSB_TXCSR, csr);
+		}
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_P_WZC_BITS;
+		musb_writew(epio, MUSB_RXCSR, csr);
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	/* re-enable interrupt */
+	musb_writew(mbase, MUSB_INTRTXE, int_txe);
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static const struct usb_ep_ops musb_ep_ops = {
+	.enable		= musb_gadget_enable,
+	.disable	= musb_gadget_disable,
+	.alloc_request	= musb_alloc_request,
+	.free_request	= musb_free_request,
+	.queue		= musb_gadget_queue,
+	.dequeue	= musb_gadget_dequeue,
+	.set_halt	= musb_gadget_set_halt,
+	.fifo_status	= musb_gadget_fifo_status,
+	.fifo_flush	= musb_gadget_fifo_flush
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int musb_gadget_get_frame(struct usb_gadget *gadget)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	return (int)musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_gadget_wakeup(struct usb_gadget *gadget)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+	void __iomem	*mregs = musb->mregs;
+	unsigned long	flags;
+	int		status = -EINVAL;
+	u8		power, devctl;
+	int		retries;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_PERIPHERAL:
+		/* NOTE:  OTG state machine doesn't include B_SUSPENDED;
+		 * that's part of the standard usb 1.1 state machine, and
+		 * doesn't affect OTG transitions.
+		 */
+		if (musb->may_wakeup && musb->is_suspended)
+			break;
+		goto done;
+	case OTG_STATE_B_IDLE:
+		/* Start SRP ... OTG not required. */
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		DBG(2, "Sending SRP: devctl: %02x\n", devctl);
+		devctl |= MUSB_DEVCTL_SESSION;
+		musb_writeb(mregs, MUSB_DEVCTL, devctl);
+		devctl = musb_readb(mregs, MUSB_DEVCTL);
+		retries = 100;
+		while (!(devctl & MUSB_DEVCTL_SESSION)) {
+			devctl = musb_readb(mregs, MUSB_DEVCTL);
+			if (retries-- < 1)
+				break;
+		}
+		retries = 10000;
+		while (devctl & MUSB_DEVCTL_SESSION) {
+			devctl = musb_readb(mregs, MUSB_DEVCTL);
+			if (retries-- < 1)
+				break;
+		}
+
+		/* Block idling for at least 1s */
+		musb_platform_try_idle(musb,
+			jiffies + msecs_to_jiffies(1 * HZ));
+
+		status = 0;
+		goto done;
+	default:
+		DBG(2, "Unhandled wake: %s\n", otg_state_string(musb));
+		goto done;
+	}
+
+	status = 0;
+
+	power = musb_readb(mregs, MUSB_POWER);
+	power |= MUSB_POWER_RESUME;
+	musb_writeb(mregs, MUSB_POWER, power);
+	DBG(2, "issue wakeup\n");
+
+	/* FIXME do this next chunk in a timer callback, no udelay */
+	mdelay(2);
+
+	power = musb_readb(mregs, MUSB_POWER);
+	power &= ~MUSB_POWER_RESUME;
+	musb_writeb(mregs, MUSB_POWER, power);
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+static int
+musb_gadget_set_self_powered(struct usb_gadget *gadget, int is_selfpowered)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	musb->is_self_powered = !!is_selfpowered;
+	return 0;
+}
+
+static void musb_pullup(struct musb *musb, int is_on)
+{
+	u8 power;
+
+	power = musb_readb(musb->mregs, MUSB_POWER);
+	if (is_on)
+		power |= MUSB_POWER_SOFTCONN;
+	else
+		power &= ~MUSB_POWER_SOFTCONN;
+
+	/* FIXME if on, HdrcStart; if off, HdrcStop */
+
+	DBG(3, "gadget %s D+ pullup %s\n",
+		musb->gadget_driver->function, is_on ? "on" : "off");
+	musb_writeb(musb->mregs, MUSB_POWER, power);
+}
+
+#if 0
+static int musb_gadget_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	DBG(2, "<= %s =>\n", __func__);
+
+	/*
+	 * FIXME iff driver's softconnect flag is set (as it is during probe,
+	 * though that can clear it), just musb_pullup().
+	 */
+
+	return -EINVAL;
+}
+#endif
+
+static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+
+	if (!musb->xceiv.set_power)
+		return -EOPNOTSUPP;
+	return otg_set_power(&musb->xceiv, mA);
+}
+
+static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct musb	*musb = gadget_to_musb(gadget);
+	unsigned long	flags;
+
+	is_on = !!is_on;
+
+	/* NOTE: this assumes we are sensing vbus; we'd rather
+	 * not pullup unless the B-session is active.
+	 */
+	spin_lock_irqsave(&musb->lock, flags);
+	if (is_on != musb->softconnect) {
+		musb->softconnect = is_on;
+		musb_pullup(musb, is_on);
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return 0;
+}
+
+static const struct usb_gadget_ops musb_gadget_operations = {
+	.get_frame		= musb_gadget_get_frame,
+	.wakeup			= musb_gadget_wakeup,
+	.set_selfpowered	= musb_gadget_set_self_powered,
+	/* .vbus_session		= musb_gadget_vbus_session, */
+	.vbus_draw		= musb_gadget_vbus_draw,
+	.pullup			= musb_gadget_pullup,
+};
+
+/* ----------------------------------------------------------------------- */
+
+/* Registration */
+
+/* Only this registration code "knows" the rule (from USB standards)
+ * about there being only one external upstream port.  It assumes
+ * all peripheral ports are external...
+ */
+static struct musb *the_gadget;
+
+static void musb_gadget_release(struct device *dev)
+{
+	/* kref_put(WHAT) */
+	dev_dbg(dev, "%s\n", __func__);
+}
+
+
+static void __init
+init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
+{
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+
+	memset(ep, 0, sizeof *ep);
+
+	ep->current_epnum = epnum;
+	ep->musb = musb;
+	ep->hw_ep = hw_ep;
+	ep->is_in = is_in;
+
+	INIT_LIST_HEAD(&ep->req_list);
+
+	sprintf(ep->name, "ep%d%s", epnum,
+			(!epnum || hw_ep->is_shared_fifo) ? "" : (
+				is_in ? "in" : "out"));
+	ep->end_point.name = ep->name;
+	INIT_LIST_HEAD(&ep->end_point.ep_list);
+	if (!epnum) {
+		ep->end_point.maxpacket = 64;
+		ep->end_point.ops = &musb_g_ep0_ops;
+		musb->g.ep0 = &ep->end_point;
+	} else {
+		if (is_in)
+			ep->end_point.maxpacket = hw_ep->max_packet_sz_tx;
+		else
+			ep->end_point.maxpacket = hw_ep->max_packet_sz_rx;
+		ep->end_point.ops = &musb_ep_ops;
+		list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
+	}
+}
+
+/*
+ * Initialize the endpoints exposed to peripheral drivers, with backlinks
+ * to the rest of the driver state.
+ */
+static inline void __init musb_g_init_endpoints(struct musb *musb)
+{
+	u8			epnum;
+	struct musb_hw_ep	*hw_ep;
+	unsigned		count = 0;
+
+	/* intialize endpoint list just once */
+	INIT_LIST_HEAD(&(musb->g.ep_list));
+
+	for (epnum = 0, hw_ep = musb->endpoints;
+			epnum < musb->nr_endpoints;
+			epnum++, hw_ep++) {
+		if (hw_ep->is_shared_fifo /* || !epnum */) {
+			init_peripheral_ep(musb, &hw_ep->ep_in, epnum, 0);
+			count++;
+		} else {
+			if (hw_ep->max_packet_sz_tx) {
+				init_peripheral_ep(musb, &hw_ep->ep_in,
+							epnum, 1);
+				count++;
+			}
+			if (hw_ep->max_packet_sz_rx) {
+				init_peripheral_ep(musb, &hw_ep->ep_out,
+							epnum, 0);
+				count++;
+			}
+		}
+	}
+}
+
+/* called once during driver setup to initialize and link into
+ * the driver model; memory is zeroed.
+ */
+int __init musb_gadget_setup(struct musb *musb)
+{
+	int status;
+
+	/* REVISIT minor race:  if (erroneously) setting up two
+	 * musb peripherals at the same time, only the bus lock
+	 * is probably held.
+	 */
+	if (the_gadget)
+		return -EBUSY;
+	the_gadget = musb;
+
+	musb->g.ops = &musb_gadget_operations;
+	musb->g.is_dualspeed = 1;
+	musb->g.speed = USB_SPEED_UNKNOWN;
+
+	/* this "gadget" abstracts/virtualizes the controller */
+	strcpy(musb->g.dev.bus_id, "gadget");
+	musb->g.dev.parent = musb->controller;
+	musb->g.dev.dma_mask = musb->controller->dma_mask;
+	musb->g.dev.release = musb_gadget_release;
+	musb->g.name = musb_driver_name;
+
+	if (is_otg_enabled(musb))
+		musb->g.is_otg = 1;
+
+	musb_g_init_endpoints(musb);
+
+	musb->is_active = 0;
+	musb_platform_try_idle(musb, 0);
+
+	status = device_register(&musb->g.dev);
+	if (status != 0)
+		the_gadget = NULL;
+	return status;
+}
+
+void musb_gadget_cleanup(struct musb *musb)
+{
+	if (musb != the_gadget)
+		return;
+
+	device_unregister(&musb->g.dev);
+	the_gadget = NULL;
+}
+
+/*
+ * Register the gadget driver. Used by gadget drivers when
+ * registering themselves with the controller.
+ *
+ * -EINVAL something went wrong (not driver)
+ * -EBUSY another gadget is already using the controller
+ * -ENOMEM no memeory to perform the operation
+ *
+ * @param driver the gadget driver
+ * @return <0 if error, 0 if everything is fine
+ */
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	int retval;
+	unsigned long flags;
+	struct musb *musb = the_gadget;
+
+	if (!driver
+			|| driver->speed != USB_SPEED_HIGH
+			|| !driver->bind
+			|| !driver->setup)
+		return -EINVAL;
+
+	/* driver must be initialized to support peripheral mode */
+	if (!musb || !(musb->board_mode == MUSB_OTG
+				|| musb->board_mode != MUSB_OTG)) {
+		DBG(1, "%s, no dev??\n", __func__);
+		return -ENODEV;
+	}
+
+	DBG(3, "registering driver %s\n", driver->function);
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb->gadget_driver) {
+		DBG(1, "%s is already bound to %s\n",
+				musb_driver_name,
+				musb->gadget_driver->driver.name);
+		retval = -EBUSY;
+	} else {
+		musb->gadget_driver = driver;
+		musb->g.dev.driver = &driver->driver;
+		driver->driver.bus = NULL;
+		musb->softconnect = 1;
+		retval = 0;
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (retval == 0) {
+		retval = driver->bind(&musb->g);
+		if (retval != 0) {
+			DBG(3, "bind to driver %s failed --> %d\n",
+					driver->driver.name, retval);
+			musb->gadget_driver = NULL;
+			musb->g.dev.driver = NULL;
+		}
+
+		spin_lock_irqsave(&musb->lock, flags);
+
+		/* REVISIT always use otg_set_peripheral(), handling
+		 * issues including the root hub one below ...
+		 */
+		musb->xceiv.gadget = &musb->g;
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		musb->is_active = 1;
+
+		/* FIXME this ignores the softconnect flag.  Drivers are
+		 * allowed hold the peripheral inactive until for example
+		 * userspace hooks up printer hardware or DSP codecs, so
+		 * hosts only see fully functional devices.
+		 */
+
+		if (!is_otg_enabled(musb))
+			musb_start(musb);
+
+		spin_unlock_irqrestore(&musb->lock, flags);
+
+		if (is_otg_enabled(musb)) {
+			DBG(3, "OTG startup...\n");
+
+			/* REVISIT:  funcall to other code, which also
+			 * handles power budgeting ... this way also
+			 * ensures HdrcStart is indirectly called.
+			 */
+			retval = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+			if (retval < 0) {
+				DBG(1, "add_hcd failed, %d\n", retval);
+				spin_lock_irqsave(&musb->lock, flags);
+				musb->xceiv.gadget = NULL;
+				musb->xceiv.state = OTG_STATE_UNDEFINED;
+				musb->gadget_driver = NULL;
+				musb->g.dev.driver = NULL;
+				spin_unlock_irqrestore(&musb->lock, flags);
+			}
+		}
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
+{
+	int			i;
+	struct musb_hw_ep	*hw_ep;
+
+	/* don't disconnect if it's not connected */
+	if (musb->g.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+	else
+		musb->g.speed = USB_SPEED_UNKNOWN;
+
+	/* deactivate the hardware */
+	if (musb->softconnect) {
+		musb->softconnect = 0;
+		musb_pullup(musb, 0);
+	}
+	musb_stop(musb);
+
+	/* killing any outstanding requests will quiesce the driver;
+	 * then report disconnect
+	 */
+	if (driver) {
+		for (i = 0, hw_ep = musb->endpoints;
+				i < musb->nr_endpoints;
+				i++, hw_ep++) {
+			musb_ep_select(musb->mregs, i);
+			if (hw_ep->is_shared_fifo /* || !epnum */) {
+				nuke(&hw_ep->ep_in, -ESHUTDOWN);
+			} else {
+				if (hw_ep->max_packet_sz_tx)
+					nuke(&hw_ep->ep_in, -ESHUTDOWN);
+				if (hw_ep->max_packet_sz_rx)
+					nuke(&hw_ep->ep_out, -ESHUTDOWN);
+			}
+		}
+
+		spin_unlock(&musb->lock);
+		driver->disconnect(&musb->g);
+		spin_lock(&musb->lock);
+	}
+}
+
+/*
+ * Unregister the gadget driver. Used by gadget drivers when
+ * unregistering themselves from the controller.
+ *
+ * @param driver the gadget driver to unregister
+ */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	unsigned long	flags;
+	int		retval = 0;
+	struct musb	*musb = the_gadget;
+
+	if (!driver || !driver->unbind || !musb)
+		return -EINVAL;
+
+	/* REVISIT always use otg_set_peripheral() here too;
+	 * this needs to shut down the OTG engine.
+	 */
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+#ifdef	CONFIG_USB_MUSB_OTG
+	musb_hnp_stop(musb);
+#endif
+
+	if (musb->gadget_driver == driver) {
+
+		(void) musb_gadget_vbus_draw(&musb->g, 0);
+
+		musb->xceiv.state = OTG_STATE_UNDEFINED;
+		stop_activity(musb, driver);
+
+		DBG(3, "unregistering driver %s\n", driver->function);
+		spin_unlock_irqrestore(&musb->lock, flags);
+		driver->unbind(&musb->g);
+		spin_lock_irqsave(&musb->lock, flags);
+
+		musb->gadget_driver = NULL;
+		musb->g.dev.driver = NULL;
+
+		musb->is_active = 0;
+		musb_platform_try_idle(musb, 0);
+	} else
+		retval = -EINVAL;
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (is_otg_enabled(musb) && retval == 0) {
+		usb_remove_hcd(musb_to_hcd(musb));
+		/* FIXME we need to be able to register another
+		 * gadget driver here and have everything work;
+		 * that currently misbehaves.
+		 */
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+
+/* ----------------------------------------------------------------------- */
+
+/* lifecycle operations called through plat_uds.c */
+
+void musb_g_resume(struct musb *musb)
+{
+	musb->is_suspended = 0;
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_IDLE:
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+	case OTG_STATE_B_PERIPHERAL:
+		musb->is_active = 1;
+		if (musb->gadget_driver && musb->gadget_driver->resume) {
+			spin_unlock(&musb->lock);
+			musb->gadget_driver->resume(&musb->g);
+			spin_lock(&musb->lock);
+		}
+		break;
+	default:
+		WARNING("unhandled RESUME transition (%s)\n",
+				otg_state_string(musb));
+	}
+}
+
+/* called when SOF packets stop for 3+ msec */
+void musb_g_suspend(struct musb *musb)
+{
+	u8	devctl;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	DBG(3, "devctl %02x\n", devctl);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_B_IDLE:
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+			musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		musb->is_suspended = 1;
+		if (musb->gadget_driver && musb->gadget_driver->suspend) {
+			spin_unlock(&musb->lock);
+			musb->gadget_driver->suspend(&musb->g);
+			spin_lock(&musb->lock);
+		}
+		break;
+	default:
+		/* REVISIT if B_HOST, clear DEVCTL.HOSTREQ;
+		 * A_PERIPHERAL may need care too
+		 */
+		WARNING("unhandled SUSPEND transition (%s)\n",
+				otg_state_string(musb));
+	}
+}
+
+/* Called during SRP */
+void musb_g_wakeup(struct musb *musb)
+{
+	musb_gadget_wakeup(&musb->g);
+}
+
+/* called when VBUS drops below session threshold, and in other cases */
+void musb_g_disconnect(struct musb *musb)
+{
+	void __iomem	*mregs = musb->mregs;
+	u8	devctl = musb_readb(mregs, MUSB_DEVCTL);
+
+	DBG(3, "devctl %02x\n", devctl);
+
+	/* clear HR */
+	musb_writeb(mregs, MUSB_DEVCTL, devctl & MUSB_DEVCTL_SESSION);
+
+	/* don't draw vbus until new b-default session */
+	(void) musb_gadget_vbus_draw(&musb->g, 0);
+
+	musb->g.speed = USB_SPEED_UNKNOWN;
+	if (musb->gadget_driver && musb->gadget_driver->disconnect) {
+		spin_unlock(&musb->lock);
+		musb->gadget_driver->disconnect(&musb->g);
+		spin_lock(&musb->lock);
+	}
+
+	switch (musb->xceiv.state) {
+	default:
+#ifdef	CONFIG_USB_MUSB_OTG
+		DBG(2, "Unhandled disconnect %s, setting a_idle\n",
+			otg_state_string(musb));
+		musb->xceiv.state = OTG_STATE_A_IDLE;
+		break;
+	case OTG_STATE_A_PERIPHERAL:
+		musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+		break;
+	case OTG_STATE_B_WAIT_ACON:
+	case OTG_STATE_B_HOST:
+#endif
+	case OTG_STATE_B_PERIPHERAL:
+	case OTG_STATE_B_IDLE:
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		break;
+	case OTG_STATE_B_SRP_INIT:
+		break;
+	}
+
+	musb->is_active = 0;
+}
+
+void musb_g_reset(struct musb *musb)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	void __iomem	*mbase = musb->mregs;
+	u8		devctl = musb_readb(mbase, MUSB_DEVCTL);
+	u8		power;
+
+	DBG(3, "<== %s addr=%x driver '%s'\n",
+			(devctl & MUSB_DEVCTL_BDEVICE)
+				? "B-Device" : "A-Device",
+			musb_readb(mbase, MUSB_FADDR),
+			musb->gadget_driver
+				? musb->gadget_driver->driver.name
+				: NULL
+			);
+
+	/* report disconnect, if we didn't already (flushing EP state) */
+	if (musb->g.speed != USB_SPEED_UNKNOWN)
+		musb_g_disconnect(musb);
+
+	/* clear HR */
+	else if (devctl & MUSB_DEVCTL_HR)
+		musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
+
+
+	/* what speed did we negotiate? */
+	power = musb_readb(mbase, MUSB_POWER);
+	musb->g.speed = (power & MUSB_POWER_HSMODE)
+			? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+	/* start in USB_STATE_DEFAULT */
+	musb->is_active = 1;
+	musb->is_suspended = 0;
+	MUSB_DEV_MODE(musb);
+	musb->address = 0;
+	musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+
+	musb->may_wakeup = 0;
+	musb->g.b_hnp_enable = 0;
+	musb->g.a_alt_hnp_support = 0;
+	musb->g.a_hnp_support = 0;
+
+	/* Normal reset, as B-Device;
+	 * or else after HNP, as A-Device
+	 */
+	if (devctl & MUSB_DEVCTL_BDEVICE) {
+		musb->xceiv.state = OTG_STATE_B_PERIPHERAL;
+		musb->g.is_a_peripheral = 0;
+	} else if (is_otg_enabled(musb)) {
+		musb->xceiv.state = OTG_STATE_A_PERIPHERAL;
+		musb->g.is_a_peripheral = 1;
+	} else
+		WARN_ON(1);
+
+	/* start with default limits on VBUS power draw */
+	(void) musb_gadget_vbus_draw(&musb->g,
+			is_otg_enabled(musb) ? 8 : 100);
+}
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
new file mode 100644
index 00000000000..59502da9f73
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget.h
@@ -0,0 +1,108 @@
+/*
+ * MUSB OTG driver peripheral defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_GADGET_H
+#define __MUSB_GADGET_H
+
+struct musb_request {
+	struct usb_request	request;
+	struct musb_ep		*ep;
+	struct musb		*musb;
+	u8 tx;			/* endpoint direction */
+	u8 epnum;
+	u8 mapped;
+};
+
+static inline struct musb_request *to_musb_request(struct usb_request *req)
+{
+	return req ? container_of(req, struct musb_request, request) : NULL;
+}
+
+extern struct usb_request *
+musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
+extern void musb_free_request(struct usb_ep *ep, struct usb_request *req);
+
+
+/*
+ * struct musb_ep - peripheral side view of endpoint rx or tx side
+ */
+struct musb_ep {
+	/* stuff towards the head is basically write-once. */
+	struct usb_ep			end_point;
+	char				name[12];
+	struct musb_hw_ep		*hw_ep;
+	struct musb			*musb;
+	u8				current_epnum;
+
+	/* ... when enabled/disabled ... */
+	u8				type;
+	u8				is_in;
+	u16				packet_sz;
+	const struct usb_endpoint_descriptor	*desc;
+	struct dma_channel		*dma;
+
+	/* later things are modified based on usage */
+	struct list_head		req_list;
+
+	/* true if lock must be dropped but req_list may not be advanced */
+	u8				busy;
+};
+
+static inline struct musb_ep *to_musb_ep(struct usb_ep *ep)
+{
+	return ep ? container_of(ep, struct musb_ep, end_point) : NULL;
+}
+
+static inline struct usb_request *next_request(struct musb_ep *ep)
+{
+	struct list_head	*queue = &ep->req_list;
+
+	if (list_empty(queue))
+		return NULL;
+	return container_of(queue->next, struct usb_request, list);
+}
+
+extern void musb_g_tx(struct musb *musb, u8 epnum);
+extern void musb_g_rx(struct musb *musb, u8 epnum);
+
+extern const struct usb_ep_ops musb_g_ep0_ops;
+
+extern int musb_gadget_setup(struct musb *);
+extern void musb_gadget_cleanup(struct musb *);
+
+extern void musb_g_giveback(struct musb_ep *, struct usb_request *, int);
+
+extern int musb_gadget_set_halt(struct usb_ep *ep, int value);
+
+#endif		/* __MUSB_GADGET_H */
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
new file mode 100644
index 00000000000..48d7d3ccb24
--- /dev/null
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -0,0 +1,981 @@
+/*
+ * MUSB OTG peripheral driver ep0 handling
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+
+#include "musb_core.h"
+
+/* ep0 is always musb->endpoints[0].ep_in */
+#define	next_ep0_request(musb)	next_in_request(&(musb)->endpoints[0])
+
+/*
+ * locking note:  we use only the controller lock, for simpler correctness.
+ * It's always held with IRQs blocked.
+ *
+ * It protects the ep0 request queue as well as ep0_state, not just the
+ * controller and indexed registers.  And that lock stays held unless it
+ * needs to be dropped to allow reentering this driver ... like upcalls to
+ * the gadget driver, or adjusting endpoint halt status.
+ */
+
+static char *decode_ep0stage(u8 stage)
+{
+	switch (stage) {
+	case MUSB_EP0_STAGE_SETUP:	return "idle";
+	case MUSB_EP0_STAGE_TX:		return "in";
+	case MUSB_EP0_STAGE_RX:		return "out";
+	case MUSB_EP0_STAGE_ACKWAIT:	return "wait";
+	case MUSB_EP0_STAGE_STATUSIN:	return "in/status";
+	case MUSB_EP0_STAGE_STATUSOUT:	return "out/status";
+	default:			return "?";
+	}
+}
+
+/* handle a standard GET_STATUS request
+ * Context:  caller holds controller lock
+ */
+static int service_tx_status_request(
+	struct musb *musb,
+	const struct usb_ctrlrequest *ctrlrequest)
+{
+	void __iomem	*mbase = musb->mregs;
+	int handled = 1;
+	u8 result[2], epnum = 0;
+	const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+	result[1] = 0;
+
+	switch (recip) {
+	case USB_RECIP_DEVICE:
+		result[0] = musb->is_self_powered << USB_DEVICE_SELF_POWERED;
+		result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+#ifdef CONFIG_USB_MUSB_OTG
+		if (musb->g.is_otg) {
+			result[0] |= musb->g.b_hnp_enable
+				<< USB_DEVICE_B_HNP_ENABLE;
+			result[0] |= musb->g.a_alt_hnp_support
+				<< USB_DEVICE_A_ALT_HNP_SUPPORT;
+			result[0] |= musb->g.a_hnp_support
+				<< USB_DEVICE_A_HNP_SUPPORT;
+		}
+#endif
+		break;
+
+	case USB_RECIP_INTERFACE:
+		result[0] = 0;
+		break;
+
+	case USB_RECIP_ENDPOINT: {
+		int		is_in;
+		struct musb_ep	*ep;
+		u16		tmp;
+		void __iomem	*regs;
+
+		epnum = (u8) ctrlrequest->wIndex;
+		if (!epnum) {
+			result[0] = 0;
+			break;
+		}
+
+		is_in = epnum & USB_DIR_IN;
+		if (is_in) {
+			epnum &= 0x0f;
+			ep = &musb->endpoints[epnum].ep_in;
+		} else {
+			ep = &musb->endpoints[epnum].ep_out;
+		}
+		regs = musb->endpoints[epnum].regs;
+
+		if (epnum >= MUSB_C_NUM_EPS || !ep->desc) {
+			handled = -EINVAL;
+			break;
+		}
+
+		musb_ep_select(mbase, epnum);
+		if (is_in)
+			tmp = musb_readw(regs, MUSB_TXCSR)
+						& MUSB_TXCSR_P_SENDSTALL;
+		else
+			tmp = musb_readw(regs, MUSB_RXCSR)
+						& MUSB_RXCSR_P_SENDSTALL;
+		musb_ep_select(mbase, 0);
+
+		result[0] = tmp ? 1 : 0;
+		} break;
+
+	default:
+		/* class, vendor, etc ... delegate */
+		handled = 0;
+		break;
+	}
+
+	/* fill up the fifo; caller updates csr0 */
+	if (handled > 0) {
+		u16	len = le16_to_cpu(ctrlrequest->wLength);
+
+		if (len > 2)
+			len = 2;
+		musb_write_fifo(&musb->endpoints[0], len, result);
+	}
+
+	return handled;
+}
+
+/*
+ * handle a control-IN request, the end0 buffer contains the current request
+ * that is supposed to be a standard control request. Assumes the fifo to
+ * be at least 2 bytes long.
+ *
+ * @return 0 if the request was NOT HANDLED,
+ * < 0 when error
+ * > 0 when the request is processed
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_in_request(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+{
+	int handled = 0;	/* not handled */
+
+	if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+			== USB_TYPE_STANDARD) {
+		switch (ctrlrequest->bRequest) {
+		case USB_REQ_GET_STATUS:
+			handled = service_tx_status_request(musb,
+					ctrlrequest);
+			break;
+
+		/* case USB_REQ_SYNC_FRAME: */
+
+		default:
+			break;
+		}
+	}
+	return handled;
+}
+
+/*
+ * Context:  caller holds controller lock
+ */
+static void musb_g_ep0_giveback(struct musb *musb, struct usb_request *req)
+{
+	musb_g_giveback(&musb->endpoints[0].ep_in, req, 0);
+	musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+}
+
+/*
+ * Tries to start B-device HNP negotiation if enabled via sysfs
+ */
+static inline void musb_try_b_hnp_enable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
+	u8		devctl;
+
+	DBG(1, "HNP: Setting HR\n");
+	devctl = musb_readb(mbase, MUSB_DEVCTL);
+	musb_writeb(mbase, MUSB_DEVCTL, devctl | MUSB_DEVCTL_HR);
+}
+
+/*
+ * Handle all control requests with no DATA stage, including standard
+ * requests such as:
+ * USB_REQ_SET_CONFIGURATION, USB_REQ_SET_INTERFACE, unrecognized
+ *	always delegated to the gadget driver
+ * USB_REQ_SET_ADDRESS, USB_REQ_CLEAR_FEATURE, USB_REQ_SET_FEATURE
+ *	always handled here, except for class/vendor/... features
+ *
+ * Context:  caller holds controller lock
+ */
+static int
+service_zero_data_request(struct musb *musb,
+		struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	int handled = -EINVAL;
+	void __iomem *mbase = musb->mregs;
+	const u8 recip = ctrlrequest->bRequestType & USB_RECIP_MASK;
+
+	/* the gadget driver handles everything except what we MUST handle */
+	if ((ctrlrequest->bRequestType & USB_TYPE_MASK)
+			== USB_TYPE_STANDARD) {
+		switch (ctrlrequest->bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			/* change it after the status stage */
+			musb->set_address = true;
+			musb->address = (u8) (ctrlrequest->wValue & 0x7f);
+			handled = 1;
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			switch (recip) {
+			case USB_RECIP_DEVICE:
+				if (ctrlrequest->wValue
+						!= USB_DEVICE_REMOTE_WAKEUP)
+					break;
+				musb->may_wakeup = 0;
+				handled = 1;
+				break;
+			case USB_RECIP_INTERFACE:
+				break;
+			case USB_RECIP_ENDPOINT:{
+				const u8 num = ctrlrequest->wIndex & 0x0f;
+				struct musb_ep *musb_ep;
+
+				if (num == 0
+						|| num >= MUSB_C_NUM_EPS
+						|| ctrlrequest->wValue
+							!= USB_ENDPOINT_HALT)
+					break;
+
+				if (ctrlrequest->wIndex & USB_DIR_IN)
+					musb_ep = &musb->endpoints[num].ep_in;
+				else
+					musb_ep = &musb->endpoints[num].ep_out;
+				if (!musb_ep->desc)
+					break;
+
+				/* REVISIT do it directly, no locking games */
+				spin_unlock(&musb->lock);
+				musb_gadget_set_halt(&musb_ep->end_point, 0);
+				spin_lock(&musb->lock);
+
+				/* select ep0 again */
+				musb_ep_select(mbase, 0);
+				handled = 1;
+				} break;
+			default:
+				/* class, vendor, etc ... delegate */
+				handled = 0;
+				break;
+			}
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			switch (recip) {
+			case USB_RECIP_DEVICE:
+				handled = 1;
+				switch (ctrlrequest->wValue) {
+				case USB_DEVICE_REMOTE_WAKEUP:
+					musb->may_wakeup = 1;
+					break;
+				case USB_DEVICE_TEST_MODE:
+					if (musb->g.speed != USB_SPEED_HIGH)
+						goto stall;
+					if (ctrlrequest->wIndex & 0xff)
+						goto stall;
+
+					switch (ctrlrequest->wIndex >> 8) {
+					case 1:
+						pr_debug("TEST_J\n");
+						/* TEST_J */
+						musb->test_mode_nr =
+							MUSB_TEST_J;
+						break;
+					case 2:
+						/* TEST_K */
+						pr_debug("TEST_K\n");
+						musb->test_mode_nr =
+							MUSB_TEST_K;
+						break;
+					case 3:
+						/* TEST_SE0_NAK */
+						pr_debug("TEST_SE0_NAK\n");
+						musb->test_mode_nr =
+							MUSB_TEST_SE0_NAK;
+						break;
+					case 4:
+						/* TEST_PACKET */
+						pr_debug("TEST_PACKET\n");
+						musb->test_mode_nr =
+							MUSB_TEST_PACKET;
+						break;
+					default:
+						goto stall;
+					}
+
+					/* enter test mode after irq */
+					if (handled > 0)
+						musb->test_mode = true;
+					break;
+#ifdef CONFIG_USB_MUSB_OTG
+				case USB_DEVICE_B_HNP_ENABLE:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.b_hnp_enable = 1;
+					musb_try_b_hnp_enable(musb);
+					break;
+				case USB_DEVICE_A_HNP_SUPPORT:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.a_hnp_support = 1;
+					break;
+				case USB_DEVICE_A_ALT_HNP_SUPPORT:
+					if (!musb->g.is_otg)
+						goto stall;
+					musb->g.a_alt_hnp_support = 1;
+					break;
+#endif
+stall:
+				default:
+					handled = -EINVAL;
+					break;
+				}
+				break;
+
+			case USB_RECIP_INTERFACE:
+				break;
+
+			case USB_RECIP_ENDPOINT:{
+				const u8		epnum =
+					ctrlrequest->wIndex & 0x0f;
+				struct musb_ep		*musb_ep;
+				struct musb_hw_ep	*ep;
+				void __iomem		*regs;
+				int			is_in;
+				u16			csr;
+
+				if (epnum == 0
+						|| epnum >= MUSB_C_NUM_EPS
+						|| ctrlrequest->wValue
+							!= USB_ENDPOINT_HALT)
+					break;
+
+				ep = musb->endpoints + epnum;
+				regs = ep->regs;
+				is_in = ctrlrequest->wIndex & USB_DIR_IN;
+				if (is_in)
+					musb_ep = &ep->ep_in;
+				else
+					musb_ep = &ep->ep_out;
+				if (!musb_ep->desc)
+					break;
+
+				musb_ep_select(mbase, epnum);
+				if (is_in) {
+					csr = musb_readw(regs,
+							MUSB_TXCSR);
+					if (csr & MUSB_TXCSR_FIFONOTEMPTY)
+						csr |= MUSB_TXCSR_FLUSHFIFO;
+					csr |= MUSB_TXCSR_P_SENDSTALL
+						| MUSB_TXCSR_CLRDATATOG
+						| MUSB_TXCSR_P_WZC_BITS;
+					musb_writew(regs, MUSB_TXCSR,
+							csr);
+				} else {
+					csr = musb_readw(regs,
+							MUSB_RXCSR);
+					csr |= MUSB_RXCSR_P_SENDSTALL
+						| MUSB_RXCSR_FLUSHFIFO
+						| MUSB_RXCSR_CLRDATATOG
+						| MUSB_TXCSR_P_WZC_BITS;
+					musb_writew(regs, MUSB_RXCSR,
+							csr);
+				}
+
+				/* select ep0 again */
+				musb_ep_select(mbase, 0);
+				handled = 1;
+				} break;
+
+			default:
+				/* class, vendor, etc ... delegate */
+				handled = 0;
+				break;
+			}
+			break;
+		default:
+			/* delegate SET_CONFIGURATION, etc */
+			handled = 0;
+		}
+	} else
+		handled = 0;
+	return handled;
+}
+
+/* we have an ep0out data packet
+ * Context:  caller holds controller lock
+ */
+static void ep0_rxstate(struct musb *musb)
+{
+	void __iomem		*regs = musb->control_ep->regs;
+	struct usb_request	*req;
+	u16			tmp;
+
+	req = next_ep0_request(musb);
+
+	/* read packet and ack; or stall because of gadget driver bug:
+	 * should have provided the rx buffer before setup() returned.
+	 */
+	if (req) {
+		void		*buf = req->buf + req->actual;
+		unsigned	len = req->length - req->actual;
+
+		/* read the buffer */
+		tmp = musb_readb(regs, MUSB_COUNT0);
+		if (tmp > len) {
+			req->status = -EOVERFLOW;
+			tmp = len;
+		}
+		musb_read_fifo(&musb->endpoints[0], tmp, buf);
+		req->actual += tmp;
+		tmp = MUSB_CSR0_P_SVDRXPKTRDY;
+		if (tmp < 64 || req->actual == req->length) {
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			tmp |= MUSB_CSR0_P_DATAEND;
+		} else
+			req = NULL;
+	} else
+		tmp = MUSB_CSR0_P_SVDRXPKTRDY | MUSB_CSR0_P_SENDSTALL;
+
+
+	/* Completion handler may choose to stall, e.g. because the
+	 * message just received holds invalid data.
+	 */
+	if (req) {
+		musb->ackpend = tmp;
+		musb_g_ep0_giveback(musb, req);
+		if (!musb->ackpend)
+			return;
+		musb->ackpend = 0;
+	}
+	musb_writew(regs, MUSB_CSR0, tmp);
+}
+
+/*
+ * transmitting to the host (IN), this code might be called from IRQ
+ * and from kernel thread.
+ *
+ * Context:  caller holds controller lock
+ */
+static void ep0_txstate(struct musb *musb)
+{
+	void __iomem		*regs = musb->control_ep->regs;
+	struct usb_request	*request = next_ep0_request(musb);
+	u16			csr = MUSB_CSR0_TXPKTRDY;
+	u8			*fifo_src;
+	u8			fifo_count;
+
+	if (!request) {
+		/* WARN_ON(1); */
+		DBG(2, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0));
+		return;
+	}
+
+	/* load the data */
+	fifo_src = (u8 *) request->buf + request->actual;
+	fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE,
+		request->length - request->actual);
+	musb_write_fifo(&musb->endpoints[0], fifo_count, fifo_src);
+	request->actual += fifo_count;
+
+	/* update the flags */
+	if (fifo_count < MUSB_MAX_END0_PACKET
+			|| request->actual == request->length) {
+		musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
+		csr |= MUSB_CSR0_P_DATAEND;
+	} else
+		request = NULL;
+
+	/* report completions as soon as the fifo's loaded; there's no
+	 * win in waiting till this last packet gets acked.  (other than
+	 * very precise fault reporting, needed by USB TMC; possible with
+	 * this hardware, but not usable from portable gadget drivers.)
+	 */
+	if (request) {
+		musb->ackpend = csr;
+		musb_g_ep0_giveback(musb, request);
+		if (!musb->ackpend)
+			return;
+		musb->ackpend = 0;
+	}
+
+	/* send it out, triggering a "txpktrdy cleared" irq */
+	musb_writew(regs, MUSB_CSR0, csr);
+}
+
+/*
+ * Read a SETUP packet (struct usb_ctrlrequest) from the hardware.
+ * Fields are left in USB byte-order.
+ *
+ * Context:  caller holds controller lock.
+ */
+static void
+musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req)
+{
+	struct usb_request	*r;
+	void __iomem		*regs = musb->control_ep->regs;
+
+	musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req);
+
+	/* NOTE:  earlier 2.6 versions changed setup packets to host
+	 * order, but now USB packets always stay in USB byte order.
+	 */
+	DBG(3, "SETUP req%02x.%02x v%04x i%04x l%d\n",
+		req->bRequestType,
+		req->bRequest,
+		le16_to_cpu(req->wValue),
+		le16_to_cpu(req->wIndex),
+		le16_to_cpu(req->wLength));
+
+	/* clean up any leftover transfers */
+	r = next_ep0_request(musb);
+	if (r)
+		musb_g_ep0_giveback(musb, r);
+
+	/* For zero-data requests we want to delay the STATUS stage to
+	 * avoid SETUPEND errors.  If we read data (OUT), delay accepting
+	 * packets until there's a buffer to store them in.
+	 *
+	 * If we write data, the controller acts happier if we enable
+	 * the TX FIFO right away, and give the controller a moment
+	 * to switch modes...
+	 */
+	musb->set_address = false;
+	musb->ackpend = MUSB_CSR0_P_SVDRXPKTRDY;
+	if (req->wLength == 0) {
+		if (req->bRequestType & USB_DIR_IN)
+			musb->ackpend |= MUSB_CSR0_TXPKTRDY;
+		musb->ep0_state = MUSB_EP0_STAGE_ACKWAIT;
+	} else if (req->bRequestType & USB_DIR_IN) {
+		musb->ep0_state = MUSB_EP0_STAGE_TX;
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDRXPKTRDY);
+		while ((musb_readw(regs, MUSB_CSR0)
+				& MUSB_CSR0_RXPKTRDY) != 0)
+			cpu_relax();
+		musb->ackpend = 0;
+	} else
+		musb->ep0_state = MUSB_EP0_STAGE_RX;
+}
+
+static int
+forward_to_driver(struct musb *musb, const struct usb_ctrlrequest *ctrlrequest)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	int retval;
+	if (!musb->gadget_driver)
+		return -EOPNOTSUPP;
+	spin_unlock(&musb->lock);
+	retval = musb->gadget_driver->setup(&musb->g, ctrlrequest);
+	spin_lock(&musb->lock);
+	return retval;
+}
+
+/*
+ * Handle peripheral ep0 interrupt
+ *
+ * Context: irq handler; we won't re-enter the driver that way.
+ */
+irqreturn_t musb_g_ep0_irq(struct musb *musb)
+{
+	u16		csr;
+	u16		len;
+	void __iomem	*mbase = musb->mregs;
+	void __iomem	*regs = musb->endpoints[0].regs;
+	irqreturn_t	retval = IRQ_NONE;
+
+	musb_ep_select(mbase, 0);	/* select ep0 */
+	csr = musb_readw(regs, MUSB_CSR0);
+	len = musb_readb(regs, MUSB_COUNT0);
+
+	DBG(4, "csr %04x, count %d, myaddr %d, ep0stage %s\n",
+			csr, len,
+			musb_readb(mbase, MUSB_FADDR),
+			decode_ep0stage(musb->ep0_state));
+
+	/* I sent a stall.. need to acknowledge it now.. */
+	if (csr & MUSB_CSR0_P_SENTSTALL) {
+		musb_writew(regs, MUSB_CSR0,
+				csr & ~MUSB_CSR0_P_SENTSTALL);
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		csr = musb_readw(regs, MUSB_CSR0);
+	}
+
+	/* request ended "early" */
+	if (csr & MUSB_CSR0_P_SETUPEND) {
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND);
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		csr = musb_readw(regs, MUSB_CSR0);
+		/* NOTE:  request may need completion */
+	}
+
+	/* docs from Mentor only describe tx, rx, and idle/setup states.
+	 * we need to handle nuances around status stages, and also the
+	 * case where status and setup stages come back-to-back ...
+	 */
+	switch (musb->ep0_state) {
+
+	case MUSB_EP0_STAGE_TX:
+		/* irq on clearing txpktrdy */
+		if ((csr & MUSB_CSR0_TXPKTRDY) == 0) {
+			ep0_txstate(musb);
+			retval = IRQ_HANDLED;
+		}
+		break;
+
+	case MUSB_EP0_STAGE_RX:
+		/* irq on set rxpktrdy */
+		if (csr & MUSB_CSR0_RXPKTRDY) {
+			ep0_rxstate(musb);
+			retval = IRQ_HANDLED;
+		}
+		break;
+
+	case MUSB_EP0_STAGE_STATUSIN:
+		/* end of sequence #2 (OUT/RX state) or #3 (no data) */
+
+		/* update address (if needed) only @ the end of the
+		 * status phase per usb spec, which also guarantees
+		 * we get 10 msec to receive this irq... until this
+		 * is done we won't see the next packet.
+		 */
+		if (musb->set_address) {
+			musb->set_address = false;
+			musb_writeb(mbase, MUSB_FADDR, musb->address);
+		}
+
+		/* enter test mode if needed (exit by reset) */
+		else if (musb->test_mode) {
+			DBG(1, "entering TESTMODE\n");
+
+			if (MUSB_TEST_PACKET == musb->test_mode_nr)
+				musb_load_testpacket(musb);
+
+			musb_writeb(mbase, MUSB_TESTMODE,
+					musb->test_mode_nr);
+		}
+		/* FALLTHROUGH */
+
+	case MUSB_EP0_STAGE_STATUSOUT:
+		/* end of sequence #1: write to host (TX state) */
+		{
+			struct usb_request	*req;
+
+			req = next_ep0_request(musb);
+			if (req)
+				musb_g_ep0_giveback(musb, req);
+		}
+		retval = IRQ_HANDLED;
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		/* FALLTHROUGH */
+
+	case MUSB_EP0_STAGE_SETUP:
+		if (csr & MUSB_CSR0_RXPKTRDY) {
+			struct usb_ctrlrequest	setup;
+			int			handled = 0;
+
+			if (len != 8) {
+				ERR("SETUP packet len %d != 8 ?\n", len);
+				break;
+			}
+			musb_read_setup(musb, &setup);
+			retval = IRQ_HANDLED;
+
+			/* sometimes the RESET won't be reported */
+			if (unlikely(musb->g.speed == USB_SPEED_UNKNOWN)) {
+				u8	power;
+
+				printk(KERN_NOTICE "%s: peripheral reset "
+						"irq lost!\n",
+						musb_driver_name);
+				power = musb_readb(mbase, MUSB_POWER);
+				musb->g.speed = (power & MUSB_POWER_HSMODE)
+					? USB_SPEED_HIGH : USB_SPEED_FULL;
+
+			}
+
+			switch (musb->ep0_state) {
+
+			/* sequence #3 (no data stage), includes requests
+			 * we can't forward (notably SET_ADDRESS and the
+			 * device/endpoint feature set/clear operations)
+			 * plus SET_CONFIGURATION and others we must
+			 */
+			case MUSB_EP0_STAGE_ACKWAIT:
+				handled = service_zero_data_request(
+						musb, &setup);
+
+				/* status stage might be immediate */
+				if (handled > 0) {
+					musb->ackpend |= MUSB_CSR0_P_DATAEND;
+					musb->ep0_state =
+						MUSB_EP0_STAGE_STATUSIN;
+				}
+				break;
+
+			/* sequence #1 (IN to host), includes GET_STATUS
+			 * requests that we can't forward, GET_DESCRIPTOR
+			 * and others that we must
+			 */
+			case MUSB_EP0_STAGE_TX:
+				handled = service_in_request(musb, &setup);
+				if (handled > 0) {
+					musb->ackpend = MUSB_CSR0_TXPKTRDY
+						| MUSB_CSR0_P_DATAEND;
+					musb->ep0_state =
+						MUSB_EP0_STAGE_STATUSOUT;
+				}
+				break;
+
+			/* sequence #2 (OUT from host), always forward */
+			default:		/* MUSB_EP0_STAGE_RX */
+				break;
+			}
+
+			DBG(3, "handled %d, csr %04x, ep0stage %s\n",
+				handled, csr,
+				decode_ep0stage(musb->ep0_state));
+
+			/* unless we need to delegate this to the gadget
+			 * driver, we know how to wrap this up:  csr0 has
+			 * not yet been written.
+			 */
+			if (handled < 0)
+				goto stall;
+			else if (handled > 0)
+				goto finish;
+
+			handled = forward_to_driver(musb, &setup);
+			if (handled < 0) {
+				musb_ep_select(mbase, 0);
+stall:
+				DBG(3, "stall (%d)\n", handled);
+				musb->ackpend |= MUSB_CSR0_P_SENDSTALL;
+				musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+finish:
+				musb_writew(regs, MUSB_CSR0,
+						musb->ackpend);
+				musb->ackpend = 0;
+			}
+		}
+		break;
+
+	case MUSB_EP0_STAGE_ACKWAIT:
+		/* This should not happen. But happens with tusb6010 with
+		 * g_file_storage and high speed. Do nothing.
+		 */
+		retval = IRQ_HANDLED;
+		break;
+
+	default:
+		/* "can't happen" */
+		WARN_ON(1);
+		musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL);
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		break;
+	}
+
+	return retval;
+}
+
+
+static int
+musb_g_ep0_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int musb_g_ep0_disable(struct usb_ep *e)
+{
+	/* always enabled */
+	return -EINVAL;
+}
+
+static int
+musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags)
+{
+	struct musb_ep		*ep;
+	struct musb_request	*req;
+	struct musb		*musb;
+	int			status;
+	unsigned long		lockflags;
+	void __iomem		*regs;
+
+	if (!e || !r)
+		return -EINVAL;
+
+	ep = to_musb_ep(e);
+	musb = ep->musb;
+	regs = musb->control_ep->regs;
+
+	req = to_musb_request(r);
+	req->musb = musb;
+	req->request.actual = 0;
+	req->request.status = -EINPROGRESS;
+	req->tx = ep->is_in;
+
+	spin_lock_irqsave(&musb->lock, lockflags);
+
+	if (!list_empty(&ep->req_list)) {
+		status = -EBUSY;
+		goto cleanup;
+	}
+
+	switch (musb->ep0_state) {
+	case MUSB_EP0_STAGE_RX:		/* control-OUT data */
+	case MUSB_EP0_STAGE_TX:		/* control-IN data */
+	case MUSB_EP0_STAGE_ACKWAIT:	/* zero-length data */
+		status = 0;
+		break;
+	default:
+		DBG(1, "ep0 request queued in state %d\n",
+				musb->ep0_state);
+		status = -EINVAL;
+		goto cleanup;
+	}
+
+	/* add request to the list */
+	list_add_tail(&(req->request.list), &(ep->req_list));
+
+	DBG(3, "queue to %s (%s), length=%d\n",
+			ep->name, ep->is_in ? "IN/TX" : "OUT/RX",
+			req->request.length);
+
+	musb_ep_select(musb->mregs, 0);
+
+	/* sequence #1, IN ... start writing the data */
+	if (musb->ep0_state == MUSB_EP0_STAGE_TX)
+		ep0_txstate(musb);
+
+	/* sequence #3, no-data ... issue IN status */
+	else if (musb->ep0_state == MUSB_EP0_STAGE_ACKWAIT) {
+		if (req->request.length)
+			status = -EINVAL;
+		else {
+			musb->ep0_state = MUSB_EP0_STAGE_STATUSIN;
+			musb_writew(regs, MUSB_CSR0,
+					musb->ackpend | MUSB_CSR0_P_DATAEND);
+			musb->ackpend = 0;
+			musb_g_ep0_giveback(ep->musb, r);
+		}
+
+	/* else for sequence #2 (OUT), caller provides a buffer
+	 * before the next packet arrives.  deferred responses
+	 * (after SETUP is acked) are racey.
+	 */
+	} else if (musb->ackpend) {
+		musb_writew(regs, MUSB_CSR0, musb->ackpend);
+		musb->ackpend = 0;
+	}
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, lockflags);
+	return status;
+}
+
+static int musb_g_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	/* we just won't support this */
+	return -EINVAL;
+}
+
+static int musb_g_ep0_halt(struct usb_ep *e, int value)
+{
+	struct musb_ep		*ep;
+	struct musb		*musb;
+	void __iomem		*base, *regs;
+	unsigned long		flags;
+	int			status;
+	u16			csr;
+
+	if (!e || !value)
+		return -EINVAL;
+
+	ep = to_musb_ep(e);
+	musb = ep->musb;
+	base = musb->mregs;
+	regs = musb->control_ep->regs;
+	status = 0;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (!list_empty(&ep->req_list)) {
+		status = -EBUSY;
+		goto cleanup;
+	}
+
+	musb_ep_select(base, 0);
+	csr = musb->ackpend;
+
+	switch (musb->ep0_state) {
+
+	/* Stalls are usually issued after parsing SETUP packet, either
+	 * directly in irq context from setup() or else later.
+	 */
+	case MUSB_EP0_STAGE_TX:		/* control-IN data */
+	case MUSB_EP0_STAGE_ACKWAIT:	/* STALL for zero-length data */
+	case MUSB_EP0_STAGE_RX:		/* control-OUT data */
+		csr = musb_readw(regs, MUSB_CSR0);
+		/* FALLTHROUGH */
+
+	/* It's also OK to issue stalls during callbacks when a non-empty
+	 * DATA stage buffer has been read (or even written).
+	 */
+	case MUSB_EP0_STAGE_STATUSIN:	/* control-OUT status */
+	case MUSB_EP0_STAGE_STATUSOUT:	/* control-IN status */
+
+		csr |= MUSB_CSR0_P_SENDSTALL;
+		musb_writew(regs, MUSB_CSR0, csr);
+		musb->ep0_state = MUSB_EP0_STAGE_SETUP;
+		musb->ackpend = 0;
+		break;
+	default:
+		DBG(1, "ep0 can't halt in state %d\n", musb->ep0_state);
+		status = -EINVAL;
+	}
+
+cleanup:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return status;
+}
+
+const struct usb_ep_ops musb_g_ep0_ops = {
+	.enable		= musb_g_ep0_enable,
+	.disable	= musb_g_ep0_disable,
+	.alloc_request	= musb_alloc_request,
+	.free_request	= musb_free_request,
+	.queue		= musb_g_ep0_queue,
+	.dequeue	= musb_g_ep0_dequeue,
+	.set_halt	= musb_g_ep0_halt,
+};
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
new file mode 100644
index 00000000000..8b4be012669
--- /dev/null
+++ b/drivers/usb/musb/musb_host.c
@@ -0,0 +1,2170 @@
+/*
+ * MUSB OTG driver host support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+
+#include "musb_core.h"
+#include "musb_host.h"
+
+
+/* MUSB HOST status 22-mar-2006
+ *
+ * - There's still lots of partial code duplication for fault paths, so
+ *   they aren't handled as consistently as they need to be.
+ *
+ * - PIO mostly behaved when last tested.
+ *     + including ep0, with all usbtest cases 9, 10
+ *     + usbtest 14 (ep0out) doesn't seem to run at all
+ *     + double buffered OUT/TX endpoints saw stalls(!) with certain usbtest
+ *       configurations, but otherwise double buffering passes basic tests.
+ *     + for 2.6.N, for N > ~10, needs API changes for hcd framework.
+ *
+ * - DMA (CPPI) ... partially behaves, not currently recommended
+ *     + about 1/15 the speed of typical EHCI implementations (PCI)
+ *     + RX, all too often reqpkt seems to misbehave after tx
+ *     + TX, no known issues (other than evident silicon issue)
+ *
+ * - DMA (Mentor/OMAP) ...has at least toggle update problems
+ *
+ * - Still no traffic scheduling code to make NAKing for bulk or control
+ *   transfers unable to starve other requests; or to make efficient use
+ *   of hardware with periodic transfers.  (Note that network drivers
+ *   commonly post bulk reads that stay pending for a long time; these
+ *   would make very visible trouble.)
+ *
+ * - Not tested with HNP, but some SRP paths seem to behave.
+ *
+ * NOTE 24-August-2006:
+ *
+ * - Bulk traffic finally uses both sides of hardware ep1, freeing up an
+ *   extra endpoint for periodic use enabling hub + keybd + mouse.  That
+ *   mostly works, except that with "usbnet" it's easy to trigger cases
+ *   with "ping" where RX loses.  (a) ping to davinci, even "ping -f",
+ *   fine; but (b) ping _from_ davinci, even "ping -c 1", ICMP RX loses
+ *   although ARP RX wins.  (That test was done with a full speed link.)
+ */
+
+
+/*
+ * NOTE on endpoint usage:
+ *
+ * CONTROL transfers all go through ep0.  BULK ones go through dedicated IN
+ * and OUT endpoints ... hardware is dedicated for those "async" queue(s).
+ *
+ * (Yes, bulk _could_ use more of the endpoints than that, and would even
+ * benefit from it ... one remote device may easily be NAKing while others
+ * need to perform transfers in that same direction.  The same thing could
+ * be done in software though, assuming dma cooperates.)
+ *
+ * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
+ * So far that scheduling is both dumb and optimistic:  the endpoint will be
+ * "claimed" until its software queue is no longer refilled.  No multiplexing
+ * of transfers between endpoints, or anything clever.
+ */
+
+
+static void musb_ep_program(struct musb *musb, u8 epnum,
+			struct urb *urb, unsigned int nOut,
+			u8 *buf, u32 len);
+
+/*
+ * Clear TX fifo. Needed to avoid BABBLE errors.
+ */
+static inline void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
+{
+	void __iomem	*epio = ep->regs;
+	u16		csr;
+	int		retries = 1000;
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+		DBG(5, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
+		csr |= MUSB_TXCSR_FLUSHFIFO;
+		musb_writew(epio, MUSB_TXCSR, csr);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (retries-- < 1) {
+			ERR("Could not flush host TX fifo: csr: %04x\n", csr);
+			return;
+		}
+		mdelay(1);
+	}
+}
+
+/*
+ * Start transmit. Caller is responsible for locking shared resources.
+ * musb must be locked.
+ */
+static inline void musb_h_tx_start(struct musb_hw_ep *ep)
+{
+	u16	txcsr;
+
+	/* NOTE: no locks here; caller should lock and select EP */
+	if (ep->epnum) {
+		txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+		txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS;
+		musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+	} else {
+		txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY;
+		musb_writew(ep->regs, MUSB_CSR0, txcsr);
+	}
+
+}
+
+static inline void cppi_host_txdma_start(struct musb_hw_ep *ep)
+{
+	u16	txcsr;
+
+	/* NOTE: no locks here; caller should lock and select EP */
+	txcsr = musb_readw(ep->regs, MUSB_TXCSR);
+	txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+	musb_writew(ep->regs, MUSB_TXCSR, txcsr);
+}
+
+/*
+ * Start the URB at the front of an endpoint's queue
+ * end must be claimed from the caller.
+ *
+ * Context: controller locked, irqs blocked
+ */
+static void
+musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
+{
+	u16			frame;
+	u32			len;
+	void			*buf;
+	void __iomem		*mbase =  musb->mregs;
+	struct urb		*urb = next_urb(qh);
+	struct musb_hw_ep	*hw_ep = qh->hw_ep;
+	unsigned		pipe = urb->pipe;
+	u8			address = usb_pipedevice(pipe);
+	int			epnum = hw_ep->epnum;
+
+	/* initialize software qh state */
+	qh->offset = 0;
+	qh->segsize = 0;
+
+	/* gather right source of data */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* control transfers always start with SETUP */
+		is_in = 0;
+		hw_ep->out_qh = qh;
+		musb->ep0_stage = MUSB_EP0_START;
+		buf = urb->setup_packet;
+		len = 8;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		qh->iso_idx = 0;
+		qh->frame = 0;
+		buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+		len = urb->iso_frame_desc[0].length;
+		break;
+	default:		/* bulk, interrupt */
+		buf = urb->transfer_buffer;
+		len = urb->transfer_buffer_length;
+	}
+
+	DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n",
+			qh, urb, address, qh->epnum,
+			is_in ? "in" : "out",
+			({char *s; switch (qh->type) {
+			case USB_ENDPOINT_XFER_CONTROL:	s = ""; break;
+			case USB_ENDPOINT_XFER_BULK:	s = "-bulk"; break;
+			case USB_ENDPOINT_XFER_ISOC:	s = "-iso"; break;
+			default:			s = "-intr"; break;
+			}; s; }),
+			epnum, buf, len);
+
+	/* Configure endpoint */
+	if (is_in || hw_ep->is_shared_fifo)
+		hw_ep->in_qh = qh;
+	else
+		hw_ep->out_qh = qh;
+	musb_ep_program(musb, epnum, urb, !is_in, buf, len);
+
+	/* transmit may have more work: start it when it is time */
+	if (is_in)
+		return;
+
+	/* determine if the time is right for a periodic transfer */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_ISOC:
+	case USB_ENDPOINT_XFER_INT:
+		DBG(3, "check whether there's still time for periodic Tx\n");
+		qh->iso_idx = 0;
+		frame = musb_readw(mbase, MUSB_FRAME);
+		/* FIXME this doesn't implement that scheduling policy ...
+		 * or handle framecounter wrapping
+		 */
+		if ((urb->transfer_flags & URB_ISO_ASAP)
+				|| (frame >= urb->start_frame)) {
+			/* REVISIT the SOF irq handler shouldn't duplicate
+			 * this code; and we don't init urb->start_frame...
+			 */
+			qh->frame = 0;
+			goto start;
+		} else {
+			qh->frame = urb->start_frame;
+			/* enable SOF interrupt so we can count down */
+			DBG(1, "SOF for %d\n", epnum);
+#if 1 /* ifndef	CONFIG_ARCH_DAVINCI */
+			musb_writeb(mbase, MUSB_INTRUSBE, 0xff);
+#endif
+		}
+		break;
+	default:
+start:
+		DBG(4, "Start TX%d %s\n", epnum,
+			hw_ep->tx_channel ? "dma" : "pio");
+
+		if (!hw_ep->tx_channel)
+			musb_h_tx_start(hw_ep);
+		else if (is_cppi_enabled() || tusb_dma_omap())
+			cppi_host_txdma_start(hw_ep);
+	}
+}
+
+/* caller owns controller lock, irqs are blocked */
+static void
+__musb_giveback(struct musb *musb, struct urb *urb, int status)
+__releases(musb->lock)
+__acquires(musb->lock)
+{
+	DBG(({ int level; switch (urb->status) {
+				case 0:
+					level = 4;
+					break;
+				/* common/boring faults */
+				case -EREMOTEIO:
+				case -ESHUTDOWN:
+				case -ECONNRESET:
+				case -EPIPE:
+					level = 3;
+					break;
+				default:
+					level = 2;
+					break;
+				}; level; }),
+			"complete %p (%d), dev%d ep%d%s, %d/%d\n",
+			urb, urb->status,
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe),
+			usb_pipein(urb->pipe) ? "in" : "out",
+			urb->actual_length, urb->transfer_buffer_length
+			);
+
+	spin_unlock(&musb->lock);
+	usb_hcd_giveback_urb(musb_to_hcd(musb), urb, status);
+	spin_lock(&musb->lock);
+}
+
+/* for bulk/interrupt endpoints only */
+static inline void
+musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb)
+{
+	struct usb_device	*udev = urb->dev;
+	u16			csr;
+	void __iomem		*epio = ep->regs;
+	struct musb_qh		*qh;
+
+	/* FIXME:  the current Mentor DMA code seems to have
+	 * problems getting toggle correct.
+	 */
+
+	if (is_in || ep->is_shared_fifo)
+		qh = ep->in_qh;
+	else
+		qh = ep->out_qh;
+
+	if (!is_in) {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		usb_settoggle(udev, qh->epnum, 1,
+			(csr & MUSB_TXCSR_H_DATATOGGLE)
+				? 1 : 0);
+	} else {
+		csr = musb_readw(epio, MUSB_RXCSR);
+		usb_settoggle(udev, qh->epnum, 0,
+			(csr & MUSB_RXCSR_H_DATATOGGLE)
+				? 1 : 0);
+	}
+}
+
+/* caller owns controller lock, irqs are blocked */
+static struct musb_qh *
+musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
+{
+	int			is_in;
+	struct musb_hw_ep	*ep = qh->hw_ep;
+	struct musb		*musb = ep->musb;
+	int			ready = qh->is_ready;
+
+	if (ep->is_shared_fifo)
+		is_in = 1;
+	else
+		is_in = usb_pipein(urb->pipe);
+
+	/* save toggle eagerly, for paranoia */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_BULK:
+	case USB_ENDPOINT_XFER_INT:
+		musb_save_toggle(ep, is_in, urb);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (status == 0 && urb->error_count)
+			status = -EXDEV;
+		break;
+	}
+
+	usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb);
+
+	qh->is_ready = 0;
+	__musb_giveback(musb, urb, status);
+	qh->is_ready = ready;
+
+	/* reclaim resources (and bandwidth) ASAP; deschedule it, and
+	 * invalidate qh as soon as list_empty(&hep->urb_list)
+	 */
+	if (list_empty(&qh->hep->urb_list)) {
+		struct list_head	*head;
+
+		if (is_in)
+			ep->rx_reinit = 1;
+		else
+			ep->tx_reinit = 1;
+
+		/* clobber old pointers to this qh */
+		if (is_in || ep->is_shared_fifo)
+			ep->in_qh = NULL;
+		else
+			ep->out_qh = NULL;
+		qh->hep->hcpriv = NULL;
+
+		switch (qh->type) {
+
+		case USB_ENDPOINT_XFER_ISOC:
+		case USB_ENDPOINT_XFER_INT:
+			/* this is where periodic bandwidth should be
+			 * de-allocated if it's tracked and allocated;
+			 * and where we'd update the schedule tree...
+			 */
+			musb->periodic[ep->epnum] = NULL;
+			kfree(qh);
+			qh = NULL;
+			break;
+
+		case USB_ENDPOINT_XFER_CONTROL:
+		case USB_ENDPOINT_XFER_BULK:
+			/* fifo policy for these lists, except that NAKing
+			 * should rotate a qh to the end (for fairness).
+			 */
+			head = qh->ring.prev;
+			list_del(&qh->ring);
+			kfree(qh);
+			qh = first_qh(head);
+			break;
+		}
+	}
+	return qh;
+}
+
+/*
+ * Advance this hardware endpoint's queue, completing the specified urb and
+ * advancing to either the next urb queued to that qh, or else invalidating
+ * that qh and advancing to the next qh scheduled after the current one.
+ *
+ * Context: caller owns controller lock, irqs are blocked
+ */
+static void
+musb_advance_schedule(struct musb *musb, struct urb *urb,
+		struct musb_hw_ep *hw_ep, int is_in)
+{
+	struct musb_qh	*qh;
+
+	if (is_in || hw_ep->is_shared_fifo)
+		qh = hw_ep->in_qh;
+	else
+		qh = hw_ep->out_qh;
+
+	if (urb->status == -EINPROGRESS)
+		qh = musb_giveback(qh, urb, 0);
+	else
+		qh = musb_giveback(qh, urb, urb->status);
+
+	if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
+		DBG(4, "... next ep%d %cX urb %p\n",
+				hw_ep->epnum, is_in ? 'R' : 'T',
+				next_urb(qh));
+		musb_start_urb(musb, is_in, qh);
+	}
+}
+
+static inline u16 musb_h_flush_rxfifo(struct musb_hw_ep *hw_ep, u16 csr)
+{
+	/* we don't want fifo to fill itself again;
+	 * ignore dma (various models),
+	 * leave toggle alone (may not have been saved yet)
+	 */
+	csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_RXPKTRDY;
+	csr &= ~(MUSB_RXCSR_H_REQPKT
+		| MUSB_RXCSR_H_AUTOREQ
+		| MUSB_RXCSR_AUTOCLEAR);
+
+	/* write 2x to allow double buffering */
+	musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+	musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+
+	/* flush writebuffer */
+	return musb_readw(hw_ep->regs, MUSB_RXCSR);
+}
+
+/*
+ * PIO RX for a packet (or part of it).
+ */
+static bool
+musb_host_packet_rx(struct musb *musb, struct urb *urb, u8 epnum, u8 iso_err)
+{
+	u16			rx_count;
+	u8			*buf;
+	u16			csr;
+	bool			done = false;
+	u32			length;
+	int			do_flush = 0;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	int			pipe = urb->pipe;
+	void			*buffer = urb->transfer_buffer;
+
+	/* musb_ep_select(mbase, epnum); */
+	rx_count = musb_readw(epio, MUSB_RXCOUNT);
+	DBG(3, "RX%d count %d, buffer %p len %d/%d\n", epnum, rx_count,
+			urb->transfer_buffer, qh->offset,
+			urb->transfer_buffer_length);
+
+	/* unload FIFO */
+	if (usb_pipeisoc(pipe)) {
+		int					status = 0;
+		struct usb_iso_packet_descriptor	*d;
+
+		if (iso_err) {
+			status = -EILSEQ;
+			urb->error_count++;
+		}
+
+		d = urb->iso_frame_desc + qh->iso_idx;
+		buf = buffer + d->offset;
+		length = d->length;
+		if (rx_count > length) {
+			if (status == 0) {
+				status = -EOVERFLOW;
+				urb->error_count++;
+			}
+			DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
+			do_flush = 1;
+		} else
+			length = rx_count;
+		urb->actual_length += length;
+		d->actual_length = length;
+
+		d->status = status;
+
+		/* see if we are done */
+		done = (++qh->iso_idx >= urb->number_of_packets);
+	} else {
+		/* non-isoch */
+		buf = buffer + qh->offset;
+		length = urb->transfer_buffer_length - qh->offset;
+		if (rx_count > length) {
+			if (urb->status == -EINPROGRESS)
+				urb->status = -EOVERFLOW;
+			DBG(2, "** OVERFLOW %d into %d\n", rx_count, length);
+			do_flush = 1;
+		} else
+			length = rx_count;
+		urb->actual_length += length;
+		qh->offset += length;
+
+		/* see if we are done */
+		done = (urb->actual_length == urb->transfer_buffer_length)
+			|| (rx_count < qh->maxpacket)
+			|| (urb->status != -EINPROGRESS);
+		if (done
+				&& (urb->status == -EINPROGRESS)
+				&& (urb->transfer_flags & URB_SHORT_NOT_OK)
+				&& (urb->actual_length
+					< urb->transfer_buffer_length))
+			urb->status = -EREMOTEIO;
+	}
+
+	musb_read_fifo(hw_ep, length, buf);
+
+	csr = musb_readw(epio, MUSB_RXCSR);
+	csr |= MUSB_RXCSR_H_WZC_BITS;
+	if (unlikely(do_flush))
+		musb_h_flush_rxfifo(hw_ep, csr);
+	else {
+		/* REVISIT this assumes AUTOCLEAR is never set */
+		csr &= ~(MUSB_RXCSR_RXPKTRDY | MUSB_RXCSR_H_REQPKT);
+		if (!done)
+			csr |= MUSB_RXCSR_H_REQPKT;
+		musb_writew(epio, MUSB_RXCSR, csr);
+	}
+
+	return done;
+}
+
+/* we don't always need to reinit a given side of an endpoint...
+ * when we do, use tx/rx reinit routine and then construct a new CSR
+ * to address data toggle, NYET, and DMA or PIO.
+ *
+ * it's possible that driver bugs (especially for DMA) or aborting a
+ * transfer might have left the endpoint busier than it should be.
+ * the busy/not-empty tests are basically paranoia.
+ */
+static void
+musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
+{
+	u16	csr;
+
+	/* NOTE:  we know the "rx" fifo reinit never triggers for ep0.
+	 * That always uses tx_reinit since ep0 repurposes TX register
+	 * offsets; the initial SETUP packet is also a kind of OUT.
+	 */
+
+	/* if programmed for Tx, put it in RX mode */
+	if (ep->is_shared_fifo) {
+		csr = musb_readw(ep->regs, MUSB_TXCSR);
+		if (csr & MUSB_TXCSR_MODE) {
+			musb_h_tx_flush_fifo(ep);
+			musb_writew(ep->regs, MUSB_TXCSR,
+					MUSB_TXCSR_FRCDATATOG);
+		}
+		/* clear mode (and everything else) to enable Rx */
+		musb_writew(ep->regs, MUSB_TXCSR, 0);
+
+	/* scrub all previous state, clearing toggle */
+	} else {
+		csr = musb_readw(ep->regs, MUSB_RXCSR);
+		if (csr & MUSB_RXCSR_RXPKTRDY)
+			WARNING("rx%d, packet/%d ready?\n", ep->epnum,
+				musb_readw(ep->regs, MUSB_RXCOUNT));
+
+		musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG);
+	}
+
+	/* target addr and (for multipoint) hub addr/port */
+	if (musb->is_multipoint) {
+		musb_writeb(ep->target_regs, MUSB_RXFUNCADDR,
+			qh->addr_reg);
+		musb_writeb(ep->target_regs, MUSB_RXHUBADDR,
+			qh->h_addr_reg);
+		musb_writeb(ep->target_regs, MUSB_RXHUBPORT,
+			qh->h_port_reg);
+	} else
+		musb_writeb(musb->mregs, MUSB_FADDR, qh->addr_reg);
+
+	/* protocol/endpoint, interval/NAKlimit, i/o size */
+	musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg);
+	musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg);
+	/* NOTE: bulk combining rewrites high bits of maxpacket */
+	musb_writew(ep->regs, MUSB_RXMAXP, qh->maxpacket);
+
+	ep->rx_reinit = 0;
+}
+
+
+/*
+ * Program an HDRC endpoint as per the given URB
+ * Context: irqs blocked, controller lock held
+ */
+static void musb_ep_program(struct musb *musb, u8 epnum,
+			struct urb *urb, unsigned int is_out,
+			u8 *buf, u32 len)
+{
+	struct dma_controller	*dma_controller;
+	struct dma_channel	*dma_channel;
+	u8			dma_ok;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh;
+	u16			packet_sz;
+
+	if (!is_out || hw_ep->is_shared_fifo)
+		qh = hw_ep->in_qh;
+	else
+		qh = hw_ep->out_qh;
+
+	packet_sz = qh->maxpacket;
+
+	DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s "
+				"h_addr%02x h_port%02x bytes %d\n",
+			is_out ? "-->" : "<--",
+			epnum, urb, urb->dev->speed,
+			qh->addr_reg, qh->epnum, is_out ? "out" : "in",
+			qh->h_addr_reg, qh->h_port_reg,
+			len);
+
+	musb_ep_select(mbase, epnum);
+
+	/* candidate for DMA? */
+	dma_controller = musb->dma_controller;
+	if (is_dma_capable() && epnum && dma_controller) {
+		dma_channel = is_out ? hw_ep->tx_channel : hw_ep->rx_channel;
+		if (!dma_channel) {
+			dma_channel = dma_controller->channel_alloc(
+					dma_controller, hw_ep, is_out);
+			if (is_out)
+				hw_ep->tx_channel = dma_channel;
+			else
+				hw_ep->rx_channel = dma_channel;
+		}
+	} else
+		dma_channel = NULL;
+
+	/* make sure we clear DMAEnab, autoSet bits from previous run */
+
+	/* OUT/transmit/EP0 or IN/receive? */
+	if (is_out) {
+		u16	csr;
+		u16	int_txe;
+		u16	load_count;
+
+		csr = musb_readw(epio, MUSB_TXCSR);
+
+		/* disable interrupt in case we flush */
+		int_txe = musb_readw(mbase, MUSB_INTRTXE);
+		musb_writew(mbase, MUSB_INTRTXE, int_txe & ~(1 << epnum));
+
+		/* general endpoint setup */
+		if (epnum) {
+			/* ASSERT:  TXCSR_DMAENAB was already cleared */
+
+			/* flush all old state, set default */
+			musb_h_tx_flush_fifo(hw_ep);
+			csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
+					| MUSB_TXCSR_DMAMODE
+					| MUSB_TXCSR_FRCDATATOG
+					| MUSB_TXCSR_H_RXSTALL
+					| MUSB_TXCSR_H_ERROR
+					| MUSB_TXCSR_TXPKTRDY
+					);
+			csr |= MUSB_TXCSR_MODE;
+
+			if (usb_gettoggle(urb->dev,
+					qh->epnum, 1))
+				csr |= MUSB_TXCSR_H_WR_DATATOGGLE
+					| MUSB_TXCSR_H_DATATOGGLE;
+			else
+				csr |= MUSB_TXCSR_CLRDATATOG;
+
+			/* twice in case of double packet buffering */
+			musb_writew(epio, MUSB_TXCSR, csr);
+			/* REVISIT may need to clear FLUSHFIFO ... */
+			musb_writew(epio, MUSB_TXCSR, csr);
+			csr = musb_readw(epio, MUSB_TXCSR);
+		} else {
+			/* endpoint 0: just flush */
+			musb_writew(epio, MUSB_CSR0,
+				csr | MUSB_CSR0_FLUSHFIFO);
+			musb_writew(epio, MUSB_CSR0,
+				csr | MUSB_CSR0_FLUSHFIFO);
+		}
+
+		/* target addr and (for multipoint) hub addr/port */
+		if (musb->is_multipoint) {
+			musb_writeb(mbase,
+				MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
+				qh->addr_reg);
+			musb_writeb(mbase,
+				MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
+				qh->h_addr_reg);
+			musb_writeb(mbase,
+				MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
+				qh->h_port_reg);
+/* FIXME if !epnum, do the same for RX ... */
+		} else
+			musb_writeb(mbase, MUSB_FADDR, qh->addr_reg);
+
+		/* protocol/endpoint/interval/NAKlimit */
+		if (epnum) {
+			musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
+			if (can_bulk_split(musb, qh->type))
+				musb_writew(epio, MUSB_TXMAXP,
+					packet_sz
+					| ((hw_ep->max_packet_sz_tx /
+						packet_sz) - 1) << 11);
+			else
+				musb_writew(epio, MUSB_TXMAXP,
+					packet_sz);
+			musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
+		} else {
+			musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
+			if (musb->is_multipoint)
+				musb_writeb(epio, MUSB_TYPE0,
+						qh->type_reg);
+		}
+
+		if (can_bulk_split(musb, qh->type))
+			load_count = min((u32) hw_ep->max_packet_sz_tx,
+						len);
+		else
+			load_count = min((u32) packet_sz, len);
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+		if (dma_channel) {
+
+			/* clear previous state */
+			csr = musb_readw(epio, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAMODE
+				| MUSB_TXCSR_DMAENAB);
+			csr |= MUSB_TXCSR_MODE;
+			musb_writew(epio, MUSB_TXCSR,
+				csr | MUSB_TXCSR_MODE);
+
+			qh->segsize = min(len, dma_channel->max_len);
+
+			if (qh->segsize <= packet_sz)
+				dma_channel->desired_mode = 0;
+			else
+				dma_channel->desired_mode = 1;
+
+
+			if (dma_channel->desired_mode == 0) {
+				csr &= ~(MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAMODE);
+				csr |= (MUSB_TXCSR_DMAENAB);
+					/* against programming guide */
+			} else
+				csr |= (MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAENAB
+					| MUSB_TXCSR_DMAMODE);
+
+			musb_writew(epio, MUSB_TXCSR, csr);
+
+			dma_ok = dma_controller->channel_program(
+					dma_channel, packet_sz,
+					dma_channel->desired_mode,
+					urb->transfer_dma,
+					qh->segsize);
+			if (dma_ok) {
+				load_count = 0;
+			} else {
+				dma_controller->channel_release(dma_channel);
+				if (is_out)
+					hw_ep->tx_channel = NULL;
+				else
+					hw_ep->rx_channel = NULL;
+				dma_channel = NULL;
+			}
+		}
+#endif
+
+		/* candidate for DMA */
+		if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
+
+			/* program endpoint CSRs first, then setup DMA.
+			 * assume CPPI setup succeeds.
+			 * defer enabling dma.
+			 */
+			csr = musb_readw(epio, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAMODE
+					| MUSB_TXCSR_DMAENAB);
+			csr |= MUSB_TXCSR_MODE;
+			musb_writew(epio, MUSB_TXCSR,
+				csr | MUSB_TXCSR_MODE);
+
+			dma_channel->actual_len = 0L;
+			qh->segsize = len;
+
+			/* TX uses "rndis" mode automatically, but needs help
+			 * to identify the zero-length-final-packet case.
+			 */
+			dma_ok = dma_controller->channel_program(
+					dma_channel, packet_sz,
+					(urb->transfer_flags
+							& URB_ZERO_PACKET)
+						== URB_ZERO_PACKET,
+					urb->transfer_dma,
+					qh->segsize);
+			if (dma_ok) {
+				load_count = 0;
+			} else {
+				dma_controller->channel_release(dma_channel);
+				hw_ep->tx_channel = NULL;
+				dma_channel = NULL;
+
+				/* REVISIT there's an error path here that
+				 * needs handling:  can't do dma, but
+				 * there's no pio buffer address...
+				 */
+			}
+		}
+
+		if (load_count) {
+			/* ASSERT:  TXCSR_DMAENAB was already cleared */
+
+			/* PIO to load FIFO */
+			qh->segsize = load_count;
+			musb_write_fifo(hw_ep, load_count, buf);
+			csr = musb_readw(epio, MUSB_TXCSR);
+			csr &= ~(MUSB_TXCSR_DMAENAB
+				| MUSB_TXCSR_DMAMODE
+				| MUSB_TXCSR_AUTOSET);
+			/* write CSR */
+			csr |= MUSB_TXCSR_MODE;
+
+			if (epnum)
+				musb_writew(epio, MUSB_TXCSR, csr);
+		}
+
+		/* re-enable interrupt */
+		musb_writew(mbase, MUSB_INTRTXE, int_txe);
+
+	/* IN/receive */
+	} else {
+		u16	csr;
+
+		if (hw_ep->rx_reinit) {
+			musb_rx_reinit(musb, qh, hw_ep);
+
+			/* init new state: toggle and NYET, maybe DMA later */
+			if (usb_gettoggle(urb->dev, qh->epnum, 0))
+				csr = MUSB_RXCSR_H_WR_DATATOGGLE
+					| MUSB_RXCSR_H_DATATOGGLE;
+			else
+				csr = 0;
+			if (qh->type == USB_ENDPOINT_XFER_INT)
+				csr |= MUSB_RXCSR_DISNYET;
+
+		} else {
+			csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+
+			if (csr & (MUSB_RXCSR_RXPKTRDY
+					| MUSB_RXCSR_DMAENAB
+					| MUSB_RXCSR_H_REQPKT))
+				ERR("broken !rx_reinit, ep%d csr %04x\n",
+						hw_ep->epnum, csr);
+
+			/* scrub any stale state, leaving toggle alone */
+			csr &= MUSB_RXCSR_DISNYET;
+		}
+
+		/* kick things off */
+
+		if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
+			/* candidate for DMA */
+			if (dma_channel) {
+				dma_channel->actual_len = 0L;
+				qh->segsize = len;
+
+				/* AUTOREQ is in a DMA register */
+				musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+				csr = musb_readw(hw_ep->regs,
+						MUSB_RXCSR);
+
+				/* unless caller treats short rx transfers as
+				 * errors, we dare not queue multiple transfers.
+				 */
+				dma_ok = dma_controller->channel_program(
+						dma_channel, packet_sz,
+						!(urb->transfer_flags
+							& URB_SHORT_NOT_OK),
+						urb->transfer_dma,
+						qh->segsize);
+				if (!dma_ok) {
+					dma_controller->channel_release(
+							dma_channel);
+					hw_ep->rx_channel = NULL;
+					dma_channel = NULL;
+				} else
+					csr |= MUSB_RXCSR_DMAENAB;
+			}
+		}
+
+		csr |= MUSB_RXCSR_H_REQPKT;
+		DBG(7, "RXCSR%d := %04x\n", epnum, csr);
+		musb_writew(hw_ep->regs, MUSB_RXCSR, csr);
+		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+	}
+}
+
+
+/*
+ * Service the default endpoint (ep0) as host.
+ * Return true until it's time to start the status stage.
+ */
+static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
+{
+	bool			 more = false;
+	u8			*fifo_dest = NULL;
+	u16			fifo_count = 0;
+	struct musb_hw_ep	*hw_ep = musb->control_ep;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	struct usb_ctrlrequest	*request;
+
+	switch (musb->ep0_stage) {
+	case MUSB_EP0_IN:
+		fifo_dest = urb->transfer_buffer + urb->actual_length;
+		fifo_count = min(len, ((u16) (urb->transfer_buffer_length
+					- urb->actual_length)));
+		if (fifo_count < len)
+			urb->status = -EOVERFLOW;
+
+		musb_read_fifo(hw_ep, fifo_count, fifo_dest);
+
+		urb->actual_length += fifo_count;
+		if (len < qh->maxpacket) {
+			/* always terminate on short read; it's
+			 * rarely reported as an error.
+			 */
+		} else if (urb->actual_length <
+				urb->transfer_buffer_length)
+			more = true;
+		break;
+	case MUSB_EP0_START:
+		request = (struct usb_ctrlrequest *) urb->setup_packet;
+
+		if (!request->wLength) {
+			DBG(4, "start no-DATA\n");
+			break;
+		} else if (request->bRequestType & USB_DIR_IN) {
+			DBG(4, "start IN-DATA\n");
+			musb->ep0_stage = MUSB_EP0_IN;
+			more = true;
+			break;
+		} else {
+			DBG(4, "start OUT-DATA\n");
+			musb->ep0_stage = MUSB_EP0_OUT;
+			more = true;
+		}
+		/* FALLTHROUGH */
+	case MUSB_EP0_OUT:
+		fifo_count = min(qh->maxpacket, ((u16)
+				(urb->transfer_buffer_length
+				- urb->actual_length)));
+
+		if (fifo_count) {
+			fifo_dest = (u8 *) (urb->transfer_buffer
+					+ urb->actual_length);
+			DBG(3, "Sending %d bytes to %p\n",
+					fifo_count, fifo_dest);
+			musb_write_fifo(hw_ep, fifo_count, fifo_dest);
+
+			urb->actual_length += fifo_count;
+			more = true;
+		}
+		break;
+	default:
+		ERR("bogus ep0 stage %d\n", musb->ep0_stage);
+		break;
+	}
+
+	return more;
+}
+
+/*
+ * Handle default endpoint interrupt as host. Only called in IRQ time
+ * from the LinuxIsr() interrupt service routine.
+ *
+ * called with controller irqlocked
+ */
+irqreturn_t musb_h_ep0_irq(struct musb *musb)
+{
+	struct urb		*urb;
+	u16			csr, len;
+	int			status = 0;
+	void __iomem		*mbase = musb->mregs;
+	struct musb_hw_ep	*hw_ep = musb->control_ep;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	bool			complete = false;
+	irqreturn_t		retval = IRQ_NONE;
+
+	/* ep0 only has one queue, "in" */
+	urb = next_urb(qh);
+
+	musb_ep_select(mbase, 0);
+	csr = musb_readw(epio, MUSB_CSR0);
+	len = (csr & MUSB_CSR0_RXPKTRDY)
+			? musb_readb(epio, MUSB_COUNT0)
+			: 0;
+
+	DBG(4, "<== csr0 %04x, qh %p, count %d, urb %p, stage %d\n",
+		csr, qh, len, urb, musb->ep0_stage);
+
+	/* if we just did status stage, we are done */
+	if (MUSB_EP0_STATUS == musb->ep0_stage) {
+		retval = IRQ_HANDLED;
+		complete = true;
+	}
+
+	/* prepare status */
+	if (csr & MUSB_CSR0_H_RXSTALL) {
+		DBG(6, "STALLING ENDPOINT\n");
+		status = -EPIPE;
+
+	} else if (csr & MUSB_CSR0_H_ERROR) {
+		DBG(2, "no response, csr0 %04x\n", csr);
+		status = -EPROTO;
+
+	} else if (csr & MUSB_CSR0_H_NAKTIMEOUT) {
+		DBG(2, "control NAK timeout\n");
+
+		/* NOTE:  this code path would be a good place to PAUSE a
+		 * control transfer, if another one is queued, so that
+		 * ep0 is more likely to stay busy.
+		 *
+		 * if (qh->ring.next != &musb->control), then
+		 * we have a candidate... NAKing is *NOT* an error
+		 */
+		musb_writew(epio, MUSB_CSR0, 0);
+		retval = IRQ_HANDLED;
+	}
+
+	if (status) {
+		DBG(6, "aborting\n");
+		retval = IRQ_HANDLED;
+		if (urb)
+			urb->status = status;
+		complete = true;
+
+		/* use the proper sequence to abort the transfer */
+		if (csr & MUSB_CSR0_H_REQPKT) {
+			csr &= ~MUSB_CSR0_H_REQPKT;
+			musb_writew(epio, MUSB_CSR0, csr);
+			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+			musb_writew(epio, MUSB_CSR0, csr);
+		} else {
+			csr |= MUSB_CSR0_FLUSHFIFO;
+			musb_writew(epio, MUSB_CSR0, csr);
+			musb_writew(epio, MUSB_CSR0, csr);
+			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+			musb_writew(epio, MUSB_CSR0, csr);
+		}
+
+		musb_writeb(epio, MUSB_NAKLIMIT0, 0);
+
+		/* clear it */
+		musb_writew(epio, MUSB_CSR0, 0);
+	}
+
+	if (unlikely(!urb)) {
+		/* stop endpoint since we have no place for its data, this
+		 * SHOULD NEVER HAPPEN! */
+		ERR("no URB for end 0\n");
+
+		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
+		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
+		musb_writew(epio, MUSB_CSR0, 0);
+
+		goto done;
+	}
+
+	if (!complete) {
+		/* call common logic and prepare response */
+		if (musb_h_ep0_continue(musb, len, urb)) {
+			/* more packets required */
+			csr = (MUSB_EP0_IN == musb->ep0_stage)
+				?  MUSB_CSR0_H_REQPKT : MUSB_CSR0_TXPKTRDY;
+		} else {
+			/* data transfer complete; perform status phase */
+			if (usb_pipeout(urb->pipe)
+					|| !urb->transfer_buffer_length)
+				csr = MUSB_CSR0_H_STATUSPKT
+					| MUSB_CSR0_H_REQPKT;
+			else
+				csr = MUSB_CSR0_H_STATUSPKT
+					| MUSB_CSR0_TXPKTRDY;
+
+			/* flag status stage */
+			musb->ep0_stage = MUSB_EP0_STATUS;
+
+			DBG(5, "ep0 STATUS, csr %04x\n", csr);
+
+		}
+		musb_writew(epio, MUSB_CSR0, csr);
+		retval = IRQ_HANDLED;
+	} else
+		musb->ep0_stage = MUSB_EP0_IDLE;
+
+	/* call completion handler if done */
+	if (complete)
+		musb_advance_schedule(musb, urb, hw_ep, 1);
+done:
+	return retval;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Host side TX (OUT) using Mentor DMA works as follows:
+	submit_urb ->
+		- if queue was empty, Program Endpoint
+		- ... which starts DMA to fifo in mode 1 or 0
+
+	DMA Isr (transfer complete) -> TxAvail()
+		- Stop DMA (~DmaEnab)	(<--- Alert ... currently happens
+					only in musb_cleanup_urb)
+		- TxPktRdy has to be set in mode 0 or for
+			short packets in mode 1.
+*/
+
+#endif
+
+/* Service a Tx-Available or dma completion irq for the endpoint */
+void musb_host_tx(struct musb *musb, u8 epnum)
+{
+	int			pipe;
+	bool			done = false;
+	u16			tx_csr;
+	size_t			wLength = 0;
+	u8			*buf = NULL;
+	struct urb		*urb;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->out_qh;
+	u32			status = 0;
+	void __iomem		*mbase = musb->mregs;
+	struct dma_channel	*dma;
+
+	urb = next_urb(qh);
+
+	musb_ep_select(mbase, epnum);
+	tx_csr = musb_readw(epio, MUSB_TXCSR);
+
+	/* with CPPI, DMA sometimes triggers "extra" irqs */
+	if (!urb) {
+		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		goto finish;
+	}
+
+	pipe = urb->pipe;
+	dma = is_dma_capable() ? hw_ep->tx_channel : NULL;
+	DBG(4, "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr,
+			dma ? ", dma" : "");
+
+	/* check for errors */
+	if (tx_csr & MUSB_TXCSR_H_RXSTALL) {
+		/* dma was disabled, fifo flushed */
+		DBG(3, "TX end %d stall\n", epnum);
+
+		/* stall; record URB status */
+		status = -EPIPE;
+
+	} else if (tx_csr & MUSB_TXCSR_H_ERROR) {
+		/* (NON-ISO) dma was disabled, fifo flushed */
+		DBG(3, "TX 3strikes on ep=%d\n", epnum);
+
+		status = -ETIMEDOUT;
+
+	} else if (tx_csr & MUSB_TXCSR_H_NAKTIMEOUT) {
+		DBG(6, "TX end=%d device not responding\n", epnum);
+
+		/* NOTE:  this code path would be a good place to PAUSE a
+		 * transfer, if there's some other (nonperiodic) tx urb
+		 * that could use this fifo.  (dma complicates it...)
+		 *
+		 * if (bulk && qh->ring.next != &musb->out_bulk), then
+		 * we have a candidate... NAKing is *NOT* an error
+		 */
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR,
+				MUSB_TXCSR_H_WZC_BITS
+				| MUSB_TXCSR_TXPKTRDY);
+		goto finish;
+	}
+
+	if (status) {
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+		}
+
+		/* do the proper sequence to abort the transfer in the
+		 * usb core; the dma engine should already be stopped.
+		 */
+		musb_h_tx_flush_fifo(hw_ep);
+		tx_csr &= ~(MUSB_TXCSR_AUTOSET
+				| MUSB_TXCSR_DMAENAB
+				| MUSB_TXCSR_H_ERROR
+				| MUSB_TXCSR_H_RXSTALL
+				| MUSB_TXCSR_H_NAKTIMEOUT
+				);
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR, tx_csr);
+		/* REVISIT may need to clear FLUSHFIFO ... */
+		musb_writew(epio, MUSB_TXCSR, tx_csr);
+		musb_writeb(epio, MUSB_TXINTERVAL, 0);
+
+		done = true;
+	}
+
+	/* second cppi case */
+	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
+		goto finish;
+
+	}
+
+	/* REVISIT this looks wrong... */
+	if (!status || dma || usb_pipeisoc(pipe)) {
+		if (dma)
+			wLength = dma->actual_len;
+		else
+			wLength = qh->segsize;
+		qh->offset += wLength;
+
+		if (usb_pipeisoc(pipe)) {
+			struct usb_iso_packet_descriptor	*d;
+
+			d = urb->iso_frame_desc + qh->iso_idx;
+			d->actual_length = qh->segsize;
+			if (++qh->iso_idx >= urb->number_of_packets) {
+				done = true;
+			} else {
+				d++;
+				buf = urb->transfer_buffer + d->offset;
+				wLength = d->length;
+			}
+		} else if (dma) {
+			done = true;
+		} else {
+			/* see if we need to send more data, or ZLP */
+			if (qh->segsize < qh->maxpacket)
+				done = true;
+			else if (qh->offset == urb->transfer_buffer_length
+					&& !(urb->transfer_flags
+						& URB_ZERO_PACKET))
+				done = true;
+			if (!done) {
+				buf = urb->transfer_buffer
+						+ qh->offset;
+				wLength = urb->transfer_buffer_length
+						- qh->offset;
+			}
+		}
+	}
+
+	/* urb->status != -EINPROGRESS means request has been faulted,
+	 * so we must abort this transfer after cleanup
+	 */
+	if (urb->status != -EINPROGRESS) {
+		done = true;
+		if (status == 0)
+			status = urb->status;
+	}
+
+	if (done) {
+		/* set status */
+		urb->status = status;
+		urb->actual_length = qh->offset;
+		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+
+	} else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
+		/* WARN_ON(!buf); */
+
+		/* REVISIT:  some docs say that when hw_ep->tx_double_buffered,
+		 * (and presumably, fifo is not half-full) we should write TWO
+		 * packets before updating TXCSR ... other docs disagree ...
+		 */
+		/* PIO:  start next packet in this URB */
+		wLength = min(qh->maxpacket, (u16) wLength);
+		musb_write_fifo(hw_ep, wLength, buf);
+		qh->segsize = wLength;
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_TXCSR,
+				MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
+	} else
+		DBG(1, "not complete, but dma enabled?\n");
+
+finish:
+	return;
+}
+
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+
+/* Host side RX (IN) using Mentor DMA works as follows:
+	submit_urb ->
+		- if queue was empty, ProgramEndpoint
+		- first IN token is sent out (by setting ReqPkt)
+	LinuxIsr -> RxReady()
+	/\	=> first packet is received
+	|	- Set in mode 0 (DmaEnab, ~ReqPkt)
+	|		-> DMA Isr (transfer complete) -> RxReady()
+	|		    - Ack receive (~RxPktRdy), turn off DMA (~DmaEnab)
+	|		    - if urb not complete, send next IN token (ReqPkt)
+	|			   |		else complete urb.
+	|			   |
+	---------------------------
+ *
+ * Nuances of mode 1:
+ *	For short packets, no ack (+RxPktRdy) is sent automatically
+ *	(even if AutoClear is ON)
+ *	For full packets, ack (~RxPktRdy) and next IN token (+ReqPkt) is sent
+ *	automatically => major problem, as collecting the next packet becomes
+ *	difficult. Hence mode 1 is not used.
+ *
+ * REVISIT
+ *	All we care about at this driver level is that
+ *       (a) all URBs terminate with REQPKT cleared and fifo(s) empty;
+ *       (b) termination conditions are: short RX, or buffer full;
+ *       (c) fault modes include
+ *           - iff URB_SHORT_NOT_OK, short RX status is -EREMOTEIO.
+ *             (and that endpoint's dma queue stops immediately)
+ *           - overflow (full, PLUS more bytes in the terminal packet)
+ *
+ *	So for example, usb-storage sets URB_SHORT_NOT_OK, and would
+ *	thus be a great candidate for using mode 1 ... for all but the
+ *	last packet of one URB's transfer.
+ */
+
+#endif
+
+/*
+ * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso,
+ * and high-bandwidth IN transfer cases.
+ */
+void musb_host_rx(struct musb *musb, u8 epnum)
+{
+	struct urb		*urb;
+	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
+	void __iomem		*epio = hw_ep->regs;
+	struct musb_qh		*qh = hw_ep->in_qh;
+	size_t			xfer_len;
+	void __iomem		*mbase = musb->mregs;
+	int			pipe;
+	u16			rx_csr, val;
+	bool			iso_err = false;
+	bool			done = false;
+	u32			status;
+	struct dma_channel	*dma;
+
+	musb_ep_select(mbase, epnum);
+
+	urb = next_urb(qh);
+	dma = is_dma_capable() ? hw_ep->rx_channel : NULL;
+	status = 0;
+	xfer_len = 0;
+
+	rx_csr = musb_readw(epio, MUSB_RXCSR);
+	val = rx_csr;
+
+	if (unlikely(!urb)) {
+		/* REVISIT -- THIS SHOULD NEVER HAPPEN ... but, at least
+		 * usbtest #11 (unlinks) triggers it regularly, sometimes
+		 * with fifo full.  (Only with DMA??)
+		 */
+		DBG(3, "BOGUS RX%d ready, csr %04x, count %d\n", epnum, val,
+			musb_readw(epio, MUSB_RXCOUNT));
+		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+		return;
+	}
+
+	pipe = urb->pipe;
+
+	DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n",
+		epnum, rx_csr, urb->actual_length,
+		dma ? dma->actual_len : 0);
+
+	/* check for errors, concurrent stall & unlink is not really
+	 * handled yet! */
+	if (rx_csr & MUSB_RXCSR_H_RXSTALL) {
+		DBG(3, "RX end %d STALL\n", epnum);
+
+		/* stall; record URB status */
+		status = -EPIPE;
+
+	} else if (rx_csr & MUSB_RXCSR_H_ERROR) {
+		DBG(3, "end %d RX proto error\n", epnum);
+
+		status = -EPROTO;
+		musb_writeb(epio, MUSB_RXINTERVAL, 0);
+
+	} else if (rx_csr & MUSB_RXCSR_DATAERROR) {
+
+		if (USB_ENDPOINT_XFER_ISOC != qh->type) {
+			/* NOTE this code path would be a good place to PAUSE a
+			 * transfer, if there's some other (nonperiodic) rx urb
+			 * that could use this fifo.  (dma complicates it...)
+			 *
+			 * if (bulk && qh->ring.next != &musb->in_bulk), then
+			 * we have a candidate... NAKing is *NOT* an error
+			 */
+			DBG(6, "RX end %d NAK timeout\n", epnum);
+			musb_ep_select(mbase, epnum);
+			musb_writew(epio, MUSB_RXCSR,
+					MUSB_RXCSR_H_WZC_BITS
+					| MUSB_RXCSR_H_REQPKT);
+
+			goto finish;
+		} else {
+			DBG(4, "RX end %d ISO data error\n", epnum);
+			/* packet error reported later */
+			iso_err = true;
+		}
+	}
+
+	/* faults abort the transfer */
+	if (status) {
+		/* clean up dma and collect transfer count */
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			xfer_len = dma->actual_len;
+		}
+		musb_h_flush_rxfifo(hw_ep, MUSB_RXCSR_CLRDATATOG);
+		musb_writeb(epio, MUSB_RXINTERVAL, 0);
+		done = true;
+		goto finish;
+	}
+
+	if (unlikely(dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY)) {
+		/* SHOULD NEVER HAPPEN ... but at least DaVinci has done it */
+		ERR("RX%d dma busy, csr %04x\n", epnum, rx_csr);
+		goto finish;
+	}
+
+	/* thorough shutdown for now ... given more precise fault handling
+	 * and better queueing support, we might keep a DMA pipeline going
+	 * while processing this irq for earlier completions.
+	 */
+
+	/* FIXME this is _way_ too much in-line logic for Mentor DMA */
+
+#ifndef CONFIG_USB_INVENTRA_DMA
+	if (rx_csr & MUSB_RXCSR_H_REQPKT)  {
+		/* REVISIT this happened for a while on some short reads...
+		 * the cleanup still needs investigation... looks bad...
+		 * and also duplicates dma cleanup code above ... plus,
+		 * shouldn't this be the "half full" double buffer case?
+		 */
+		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
+			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
+			(void) musb->dma_controller->channel_abort(dma);
+			xfer_len = dma->actual_len;
+			done = true;
+		}
+
+		DBG(2, "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr,
+				xfer_len, dma ? ", dma" : "");
+		rx_csr &= ~MUSB_RXCSR_H_REQPKT;
+
+		musb_ep_select(mbase, epnum);
+		musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | rx_csr);
+	}
+#endif
+	if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) {
+		xfer_len = dma->actual_len;
+
+		val &= ~(MUSB_RXCSR_DMAENAB
+			| MUSB_RXCSR_H_AUTOREQ
+			| MUSB_RXCSR_AUTOCLEAR
+			| MUSB_RXCSR_RXPKTRDY);
+		musb_writew(hw_ep->regs, MUSB_RXCSR, val);
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+		/* done if urb buffer is full or short packet is recd */
+		done = (urb->actual_length + xfer_len >=
+				urb->transfer_buffer_length
+			|| dma->actual_len < qh->maxpacket);
+
+		/* send IN token for next packet, without AUTOREQ */
+		if (!done) {
+			val |= MUSB_RXCSR_H_REQPKT;
+			musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | val);
+		}
+
+		DBG(4, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum,
+			done ? "off" : "reset",
+			musb_readw(epio, MUSB_RXCSR),
+			musb_readw(epio, MUSB_RXCOUNT));
+#else
+		done = true;
+#endif
+	} else if (urb->status == -EINPROGRESS) {
+		/* if no errors, be sure a packet is ready for unloading */
+		if (unlikely(!(rx_csr & MUSB_RXCSR_RXPKTRDY))) {
+			status = -EPROTO;
+			ERR("Rx interrupt with no errors or packet!\n");
+
+			/* FIXME this is another "SHOULD NEVER HAPPEN" */
+
+/* SCRUB (RX) */
+			/* do the proper sequence to abort the transfer */
+			musb_ep_select(mbase, epnum);
+			val &= ~MUSB_RXCSR_H_REQPKT;
+			musb_writew(epio, MUSB_RXCSR, val);
+			goto finish;
+		}
+
+		/* we are expecting IN packets */
+#ifdef CONFIG_USB_INVENTRA_DMA
+		if (dma) {
+			struct dma_controller	*c;
+			u16			rx_count;
+			int			ret;
+
+			rx_count = musb_readw(epio, MUSB_RXCOUNT);
+
+			DBG(2, "RX%d count %d, buffer 0x%x len %d/%d\n",
+					epnum, rx_count,
+					urb->transfer_dma
+						+ urb->actual_length,
+					qh->offset,
+					urb->transfer_buffer_length);
+
+			c = musb->dma_controller;
+
+			dma->desired_mode = 0;
+#ifdef USE_MODE1
+			/* because of the issue below, mode 1 will
+			 * only rarely behave with correct semantics.
+			 */
+			if ((urb->transfer_flags &
+						URB_SHORT_NOT_OK)
+				&& (urb->transfer_buffer_length -
+						urb->actual_length)
+					> qh->maxpacket)
+				dma->desired_mode = 1;
+#endif
+
+/* Disadvantage of using mode 1:
+ *	It's basically usable only for mass storage class; essentially all
+ *	other protocols also terminate transfers on short packets.
+ *
+ * Details:
+ *	An extra IN token is sent at the end of the transfer (due to AUTOREQ)
+ *	If you try to use mode 1 for (transfer_buffer_length - 512), and try
+ *	to use the extra IN token to grab the last packet using mode 0, then
+ *	the problem is that you cannot be sure when the device will send the
+ *	last packet and RxPktRdy set. Sometimes the packet is recd too soon
+ *	such that it gets lost when RxCSR is re-set at the end of the mode 1
+ *	transfer, while sometimes it is recd just a little late so that if you
+ *	try to configure for mode 0 soon after the mode 1 transfer is
+ *	completed, you will find rxcount 0. Okay, so you might think why not
+ *	wait for an interrupt when the pkt is recd. Well, you won't get any!
+ */
+
+			val = musb_readw(epio, MUSB_RXCSR);
+			val &= ~MUSB_RXCSR_H_REQPKT;
+
+			if (dma->desired_mode == 0)
+				val &= ~MUSB_RXCSR_H_AUTOREQ;
+			else
+				val |= MUSB_RXCSR_H_AUTOREQ;
+			val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
+
+			musb_writew(epio, MUSB_RXCSR,
+				MUSB_RXCSR_H_WZC_BITS | val);
+
+			/* REVISIT if when actual_length != 0,
+			 * transfer_buffer_length needs to be
+			 * adjusted first...
+			 */
+			ret = c->channel_program(
+				dma, qh->maxpacket,
+				dma->desired_mode,
+				urb->transfer_dma
+					+ urb->actual_length,
+				(dma->desired_mode == 0)
+					? rx_count
+					: urb->transfer_buffer_length);
+
+			if (!ret) {
+				c->channel_release(dma);
+				hw_ep->rx_channel = NULL;
+				dma = NULL;
+				/* REVISIT reset CSR */
+			}
+		}
+#endif	/* Mentor DMA */
+
+		if (!dma) {
+			done = musb_host_packet_rx(musb, urb,
+					epnum, iso_err);
+			DBG(6, "read %spacket\n", done ? "last " : "");
+		}
+	}
+
+	if (dma && usb_pipeisoc(pipe)) {
+		struct usb_iso_packet_descriptor	*d;
+		int					iso_stat = status;
+
+		d = urb->iso_frame_desc + qh->iso_idx;
+		d->actual_length += xfer_len;
+		if (iso_err) {
+			iso_stat = -EILSEQ;
+			urb->error_count++;
+		}
+		d->status = iso_stat;
+	}
+
+finish:
+	urb->actual_length += xfer_len;
+	qh->offset += xfer_len;
+	if (done) {
+		if (urb->status == -EINPROGRESS)
+			urb->status = status;
+		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_IN);
+	}
+}
+
+/* schedule nodes correspond to peripheral endpoints, like an OHCI QH.
+ * the software schedule associates multiple such nodes with a given
+ * host side hardware endpoint + direction; scheduling may activate
+ * that hardware endpoint.
+ */
+static int musb_schedule(
+	struct musb		*musb,
+	struct musb_qh		*qh,
+	int			is_in)
+{
+	int			idle;
+	int			best_diff;
+	int			best_end, epnum;
+	struct musb_hw_ep	*hw_ep = NULL;
+	struct list_head	*head = NULL;
+
+	/* use fixed hardware for control and bulk */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		head = &musb->control;
+		hw_ep = musb->control_ep;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		hw_ep = musb->bulk_ep;
+		if (is_in)
+			head = &musb->in_bulk;
+		else
+			head = &musb->out_bulk;
+		break;
+	}
+	if (head) {
+		idle = list_empty(head);
+		list_add_tail(&qh->ring, head);
+		goto success;
+	}
+
+	/* else, periodic transfers get muxed to other endpoints */
+
+	/* FIXME this doesn't consider direction, so it can only
+	 * work for one half of the endpoint hardware, and assumes
+	 * the previous cases handled all non-shared endpoints...
+	 */
+
+	/* we know this qh hasn't been scheduled, so all we need to do
+	 * is choose which hardware endpoint to put it on ...
+	 *
+	 * REVISIT what we really want here is a regular schedule tree
+	 * like e.g. OHCI uses, but for now musb->periodic is just an
+	 * array of the _single_ logical endpoint associated with a
+	 * given physical one (identity mapping logical->physical).
+	 *
+	 * that simplistic approach makes TT scheduling a lot simpler;
+	 * there is none, and thus none of its complexity...
+	 */
+	best_diff = 4096;
+	best_end = -1;
+
+	for (epnum = 1; epnum < musb->nr_endpoints; epnum++) {
+		int	diff;
+
+		if (musb->periodic[epnum])
+			continue;
+		hw_ep = &musb->endpoints[epnum];
+		if (hw_ep == musb->bulk_ep)
+			continue;
+
+		if (is_in)
+			diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
+		else
+			diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
+
+		if (diff > 0 && best_diff > diff) {
+			best_diff = diff;
+			best_end = epnum;
+		}
+	}
+	if (best_end < 0)
+		return -ENOSPC;
+
+	idle = 1;
+	hw_ep = musb->endpoints + best_end;
+	musb->periodic[best_end] = qh;
+	DBG(4, "qh %p periodic slot %d\n", qh, best_end);
+success:
+	qh->hw_ep = hw_ep;
+	qh->hep->hcpriv = qh;
+	if (idle)
+		musb_start_urb(musb, is_in, qh);
+	return 0;
+}
+
+static int musb_urb_enqueue(
+	struct usb_hcd			*hcd,
+	struct urb			*urb,
+	gfp_t				mem_flags)
+{
+	unsigned long			flags;
+	struct musb			*musb = hcd_to_musb(hcd);
+	struct usb_host_endpoint	*hep = urb->ep;
+	struct musb_qh			*qh = hep->hcpriv;
+	struct usb_endpoint_descriptor	*epd = &hep->desc;
+	int				ret;
+	unsigned			type_reg;
+	unsigned			interval;
+
+	/* host role must be active */
+	if (!is_host_active(musb) || !musb->is_active)
+		return -ENODEV;
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	if (ret)
+		return ret;
+
+	/* DMA mapping was already done, if needed, and this urb is on
+	 * hep->urb_list ... so there's little to do unless hep wasn't
+	 * yet scheduled onto a live qh.
+	 *
+	 * REVISIT best to keep hep->hcpriv valid until the endpoint gets
+	 * disabled, testing for empty qh->ring and avoiding qh setup costs
+	 * except for the first urb queued after a config change.
+	 */
+	if (qh) {
+		urb->hcpriv = qh;
+		return 0;
+	}
+
+	/* Allocate and initialize qh, minimizing the work done each time
+	 * hw_ep gets reprogrammed, or with irqs blocked.  Then schedule it.
+	 *
+	 * REVISIT consider a dedicated qh kmem_cache, so it's harder
+	 * for bugs in other kernel code to break this driver...
+	 */
+	qh = kzalloc(sizeof *qh, mem_flags);
+	if (!qh) {
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		return -ENOMEM;
+	}
+
+	qh->hep = hep;
+	qh->dev = urb->dev;
+	INIT_LIST_HEAD(&qh->ring);
+	qh->is_ready = 1;
+
+	qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
+
+	/* no high bandwidth support yet */
+	if (qh->maxpacket & ~0x7ff) {
+		ret = -EMSGSIZE;
+		goto done;
+	}
+
+	qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+	qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+	/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
+	qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
+
+	/* precompute rxtype/txtype/type0 register */
+	type_reg = (qh->type << 4) | qh->epnum;
+	switch (urb->dev->speed) {
+	case USB_SPEED_LOW:
+		type_reg |= 0xc0;
+		break;
+	case USB_SPEED_FULL:
+		type_reg |= 0x80;
+		break;
+	default:
+		type_reg |= 0x40;
+	}
+	qh->type_reg = type_reg;
+
+	/* precompute rxinterval/txinterval register */
+	interval = min((u8)16, epd->bInterval);	/* log encoding */
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_INT:
+		/* fullspeed uses linear encoding */
+		if (USB_SPEED_FULL == urb->dev->speed) {
+			interval = epd->bInterval;
+			if (!interval)
+				interval = 1;
+		}
+		/* FALLTHROUGH */
+	case USB_ENDPOINT_XFER_ISOC:
+		/* iso always uses log encoding */
+		break;
+	default:
+		/* REVISIT we actually want to use NAK limits, hinting to the
+		 * transfer scheduling logic to try some other qh, e.g. try
+		 * for 2 msec first:
+		 *
+		 * interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16 : 2;
+		 *
+		 * The downside of disabling this is that transfer scheduling
+		 * gets VERY unfair for nonperiodic transfers; a misbehaving
+		 * peripheral could make that hurt.  Or for reads, one that's
+		 * perfectly normal:  network and other drivers keep reads
+		 * posted at all times, having one pending for a week should
+		 * be perfectly safe.
+		 *
+		 * The upside of disabling it is avoidng transfer scheduling
+		 * code to put this aside for while.
+		 */
+		interval = 0;
+	}
+	qh->intv_reg = interval;
+
+	/* precompute addressing for external hub/tt ports */
+	if (musb->is_multipoint) {
+		struct usb_device	*parent = urb->dev->parent;
+
+		if (parent != hcd->self.root_hub) {
+			qh->h_addr_reg = (u8) parent->devnum;
+
+			/* set up tt info if needed */
+			if (urb->dev->tt) {
+				qh->h_port_reg = (u8) urb->dev->ttport;
+				qh->h_addr_reg |= 0x80;
+			}
+		}
+	}
+
+	/* invariant: hep->hcpriv is null OR the qh that's already scheduled.
+	 * until we get real dma queues (with an entry for each urb/buffer),
+	 * we only have work to do in the former case.
+	 */
+	spin_lock_irqsave(&musb->lock, flags);
+	if (hep->hcpriv) {
+		/* some concurrent activity submitted another urb to hep...
+		 * odd, rare, error prone, but legal.
+		 */
+		kfree(qh);
+		ret = 0;
+	} else
+		ret = musb_schedule(musb, qh,
+				epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK);
+
+	if (ret == 0) {
+		urb->hcpriv = qh;
+		/* FIXME set urb->start_frame for iso/intr, it's tested in
+		 * musb_start_urb(), but otherwise only konicawc cares ...
+		 */
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+done:
+	if (ret != 0) {
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+		kfree(qh);
+	}
+	return ret;
+}
+
+
+/*
+ * abort a transfer that's at the head of a hardware queue.
+ * called with controller locked, irqs blocked
+ * that hardware queue advances to the next transfer, unless prevented
+ */
+static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
+{
+	struct musb_hw_ep	*ep = qh->hw_ep;
+	void __iomem		*epio = ep->regs;
+	unsigned		hw_end = ep->epnum;
+	void __iomem		*regs = ep->musb->mregs;
+	u16			csr;
+	int			status = 0;
+
+	musb_ep_select(regs, hw_end);
+
+	if (is_dma_capable()) {
+		struct dma_channel	*dma;
+
+		dma = is_in ? ep->rx_channel : ep->tx_channel;
+		if (dma) {
+			status = ep->musb->dma_controller->channel_abort(dma);
+			DBG(status ? 1 : 3,
+				"abort %cX%d DMA for urb %p --> %d\n",
+				is_in ? 'R' : 'T', ep->epnum,
+				urb, status);
+			urb->actual_length += dma->actual_len;
+		}
+	}
+
+	/* turn off DMA requests, discard state, stop polling ... */
+	if (is_in) {
+		/* giveback saves bulk toggle */
+		csr = musb_h_flush_rxfifo(ep, 0);
+
+		/* REVISIT we still get an irq; should likely clear the
+		 * endpoint's irq status here to avoid bogus irqs.
+		 * clearing that status is platform-specific...
+		 */
+	} else {
+		musb_h_tx_flush_fifo(ep);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr &= ~(MUSB_TXCSR_AUTOSET
+			| MUSB_TXCSR_DMAENAB
+			| MUSB_TXCSR_H_RXSTALL
+			| MUSB_TXCSR_H_NAKTIMEOUT
+			| MUSB_TXCSR_H_ERROR
+			| MUSB_TXCSR_TXPKTRDY);
+		musb_writew(epio, MUSB_TXCSR, csr);
+		/* REVISIT may need to clear FLUSHFIFO ... */
+		musb_writew(epio, MUSB_TXCSR, csr);
+		/* flush cpu writebuffer */
+		csr = musb_readw(epio, MUSB_TXCSR);
+	}
+	if (status == 0)
+		musb_advance_schedule(ep->musb, urb, ep, is_in);
+	return status;
+}
+
+static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct musb		*musb = hcd_to_musb(hcd);
+	struct musb_qh		*qh;
+	struct list_head	*sched;
+	unsigned long		flags;
+	int			ret;
+
+	DBG(4, "urb=%p, dev%d ep%d%s\n", urb,
+			usb_pipedevice(urb->pipe),
+			usb_pipeendpoint(urb->pipe),
+			usb_pipein(urb->pipe) ? "in" : "out");
+
+	spin_lock_irqsave(&musb->lock, flags);
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret)
+		goto done;
+
+	qh = urb->hcpriv;
+	if (!qh)
+		goto done;
+
+	/* Any URB not actively programmed into endpoint hardware can be
+	 * immediately given back.  Such an URB must be at the head of its
+	 * endpoint queue, unless someday we get real DMA queues.  And even
+	 * then, it might not be known to the hardware...
+	 *
+	 * Otherwise abort current transfer, pending dma, etc.; urb->status
+	 * has already been updated.  This is a synchronous abort; it'd be
+	 * OK to hold off until after some IRQ, though.
+	 */
+	if (!qh->is_ready || urb->urb_list.prev != &qh->hep->urb_list)
+		ret = -EINPROGRESS;
+	else {
+		switch (qh->type) {
+		case USB_ENDPOINT_XFER_CONTROL:
+			sched = &musb->control;
+			break;
+		case USB_ENDPOINT_XFER_BULK:
+			if (usb_pipein(urb->pipe))
+				sched = &musb->in_bulk;
+			else
+				sched = &musb->out_bulk;
+			break;
+		default:
+			/* REVISIT when we get a schedule tree, periodic
+			 * transfers won't always be at the head of a
+			 * singleton queue...
+			 */
+			sched = NULL;
+			break;
+		}
+	}
+
+	/* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
+	if (ret < 0 || (sched && qh != first_qh(sched))) {
+		int	ready = qh->is_ready;
+
+		ret = 0;
+		qh->is_ready = 0;
+		__musb_giveback(musb, urb, 0);
+		qh->is_ready = ready;
+	} else
+		ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return ret;
+}
+
+/* disable an endpoint */
+static void
+musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
+{
+	u8			epnum = hep->desc.bEndpointAddress;
+	unsigned long		flags;
+	struct musb		*musb = hcd_to_musb(hcd);
+	u8			is_in = epnum & USB_DIR_IN;
+	struct musb_qh		*qh = hep->hcpriv;
+	struct urb		*urb, *tmp;
+	struct list_head	*sched;
+
+	if (!qh)
+		return;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (qh->type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		sched = &musb->control;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		if (is_in)
+			sched = &musb->in_bulk;
+		else
+			sched = &musb->out_bulk;
+		break;
+	default:
+		/* REVISIT when we get a schedule tree, periodic transfers
+		 * won't always be at the head of a singleton queue...
+		 */
+		sched = NULL;
+		break;
+	}
+
+	/* NOTE:  qh is invalid unless !list_empty(&hep->urb_list) */
+
+	/* kick first urb off the hardware, if needed */
+	qh->is_ready = 0;
+	if (!sched || qh == first_qh(sched)) {
+		urb = next_urb(qh);
+
+		/* make software (then hardware) stop ASAP */
+		if (!urb->unlinked)
+			urb->status = -ESHUTDOWN;
+
+		/* cleanup */
+		musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
+	} else
+		urb = NULL;
+
+	/* then just nuke all the others */
+	list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
+		musb_giveback(qh, urb, -ESHUTDOWN);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static int musb_h_get_frame_number(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	return musb_readw(musb->mregs, MUSB_FRAME);
+}
+
+static int musb_h_start(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	/* NOTE: musb_start() is called when the hub driver turns
+	 * on port power, or when (OTG) peripheral starts.
+	 */
+	hcd->state = HC_STATE_RUNNING;
+	musb->port1_status = 0;
+	return 0;
+}
+
+static void musb_h_stop(struct usb_hcd *hcd)
+{
+	musb_stop(hcd_to_musb(hcd));
+	hcd->state = HC_STATE_HALT;
+}
+
+static int musb_bus_suspend(struct usb_hcd *hcd)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+
+	if (musb->xceiv.state == OTG_STATE_A_SUSPEND)
+		return 0;
+
+	if (is_host_active(musb) && musb->is_active) {
+		WARNING("trying to suspend as %s is_active=%i\n",
+			otg_state_string(musb), musb->is_active);
+		return -EBUSY;
+	} else
+		return 0;
+}
+
+static int musb_bus_resume(struct usb_hcd *hcd)
+{
+	/* resuming child port does the work */
+	return 0;
+}
+
+const struct hc_driver musb_hc_driver = {
+	.description		= "musb-hcd",
+	.product_desc		= "MUSB HDRC host driver",
+	.hcd_priv_size		= sizeof(struct musb),
+	.flags			= HCD_USB2 | HCD_MEMORY,
+
+	/* not using irq handler or reset hooks from usbcore, since
+	 * those must be shared with peripheral code for OTG configs
+	 */
+
+	.start			= musb_h_start,
+	.stop			= musb_h_stop,
+
+	.get_frame_number	= musb_h_get_frame_number,
+
+	.urb_enqueue		= musb_urb_enqueue,
+	.urb_dequeue		= musb_urb_dequeue,
+	.endpoint_disable	= musb_h_disable,
+
+	.hub_status_data	= musb_hub_status_data,
+	.hub_control		= musb_hub_control,
+	.bus_suspend		= musb_bus_suspend,
+	.bus_resume		= musb_bus_resume,
+	/* .start_port_reset	= NULL, */
+	/* .hub_irq_enable	= NULL, */
+};
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
new file mode 100644
index 00000000000..77bcdb9d5b3
--- /dev/null
+++ b/drivers/usb/musb/musb_host.h
@@ -0,0 +1,110 @@
+/*
+ * MUSB OTG driver host defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef _MUSB_HOST_H
+#define _MUSB_HOST_H
+
+static inline struct usb_hcd *musb_to_hcd(struct musb *musb)
+{
+	return container_of((void *) musb, struct usb_hcd, hcd_priv);
+}
+
+static inline struct musb *hcd_to_musb(struct usb_hcd *hcd)
+{
+	return (struct musb *) (hcd->hcd_priv);
+}
+
+/* stored in "usb_host_endpoint.hcpriv" for scheduled endpoints */
+struct musb_qh {
+	struct usb_host_endpoint *hep;		/* usbcore info */
+	struct usb_device	*dev;
+	struct musb_hw_ep	*hw_ep;		/* current binding */
+
+	struct list_head	ring;		/* of musb_qh */
+	/* struct musb_qh		*next; */	/* for periodic tree */
+
+	unsigned		offset;		/* in urb->transfer_buffer */
+	unsigned		segsize;	/* current xfer fragment */
+
+	u8			type_reg;	/* {rx,tx} type register */
+	u8			intv_reg;	/* {rx,tx} interval register */
+	u8			addr_reg;	/* device address register */
+	u8			h_addr_reg;	/* hub address register */
+	u8			h_port_reg;	/* hub port register */
+
+	u8			is_ready;	/* safe to modify hw_ep */
+	u8			type;		/* XFERTYPE_* */
+	u8			epnum;
+	u16			maxpacket;
+	u16			frame;		/* for periodic schedule */
+	unsigned		iso_idx;	/* in urb->iso_frame_desc[] */
+};
+
+/* map from control or bulk queue head to the first qh on that ring */
+static inline struct musb_qh *first_qh(struct list_head *q)
+{
+	if (list_empty(q))
+		return NULL;
+	return list_entry(q->next, struct musb_qh, ring);
+}
+
+
+extern void musb_root_disconnect(struct musb *musb);
+
+struct usb_hcd;
+
+extern int musb_hub_status_data(struct usb_hcd *hcd, char *buf);
+extern int musb_hub_control(struct usb_hcd *hcd,
+			u16 typeReq, u16 wValue, u16 wIndex,
+			char *buf, u16 wLength);
+
+extern const struct hc_driver musb_hc_driver;
+
+static inline struct urb *next_urb(struct musb_qh *qh)
+{
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	struct list_head	*queue;
+
+	if (!qh)
+		return NULL;
+	queue = &qh->hep->urb_list;
+	if (list_empty(queue))
+		return NULL;
+	return list_entry(queue->next, struct urb, urb_list);
+#else
+	return NULL;
+#endif
+}
+
+#endif				/* _MUSB_HOST_H */
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
new file mode 100644
index 00000000000..6bbedae83af
--- /dev/null
+++ b/drivers/usb/musb/musb_io.h
@@ -0,0 +1,115 @@
+/*
+ * MUSB OTG driver register I/O
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_LINUX_PLATFORM_ARCH_H__
+#define __MUSB_LINUX_PLATFORM_ARCH_H__
+
+#include <linux/io.h>
+
+#ifndef	CONFIG_ARM
+static inline void readsl(const void __iomem *addr, void *buf, int len)
+	{ insl((unsigned long)addr, buf, len); }
+static inline void readsw(const void __iomem *addr, void *buf, int len)
+	{ insw((unsigned long)addr, buf, len); }
+static inline void readsb(const void __iomem *addr, void *buf, int len)
+	{ insb((unsigned long)addr, buf, len); }
+
+static inline void writesl(const void __iomem *addr, const void *buf, int len)
+	{ outsl((unsigned long)addr, buf, len); }
+static inline void writesw(const void __iomem *addr, const void *buf, int len)
+	{ outsw((unsigned long)addr, buf, len); }
+static inline void writesb(const void __iomem *addr, const void *buf, int len)
+	{ outsb((unsigned long)addr, buf, len); }
+
+#endif
+
+/* NOTE:  these offsets are all in bytes */
+
+static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
+	{ return __raw_readw(addr + offset); }
+
+static inline u32 musb_readl(const void __iomem *addr, unsigned offset)
+	{ return __raw_readl(addr + offset); }
+
+
+static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
+	{ __raw_writew(data, addr + offset); }
+
+static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
+	{ __raw_writel(data, addr + offset); }
+
+
+#ifdef CONFIG_USB_TUSB6010
+
+/*
+ * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
+ */
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+{
+	u16 tmp;
+	u8 val;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		val = (tmp >> 8);
+	else
+		val = tmp & 0xff;
+
+	return val;
+}
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+{
+	u16 tmp;
+
+	tmp = __raw_readw(addr + (offset & ~1));
+	if (offset & 1)
+		tmp = (data << 8) | (tmp & 0xff);
+	else
+		tmp = (tmp & 0xff00) | data;
+
+	__raw_writew(tmp, addr + (offset & ~1));
+}
+
+#else
+
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+	{ return __raw_readb(addr + offset); }
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+	{ __raw_writeb(data, addr + offset); }
+
+#endif	/* CONFIG_USB_TUSB6010 */
+
+#endif
diff --git a/drivers/usb/musb/musb_procfs.c b/drivers/usb/musb/musb_procfs.c
new file mode 100644
index 00000000000..55e6b78bdcc
--- /dev/null
+++ b/drivers/usb/musb/musb_procfs.c
@@ -0,0 +1,830 @@
+/*
+ * MUSB OTG driver debug support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>	/* FIXME remove procfs writes */
+#include <asm/arch/hardware.h>
+
+#include "musb_core.h"
+
+#include "davinci.h"
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+
+static int dump_qh(struct musb_qh *qh, char *buf, unsigned max)
+{
+	int				count;
+	int				tmp;
+	struct usb_host_endpoint	*hep = qh->hep;
+	struct urb			*urb;
+
+	count = snprintf(buf, max, "    qh %p dev%d ep%d%s max%d\n",
+			qh, qh->dev->devnum, qh->epnum,
+			({ char *s; switch (qh->type) {
+			case USB_ENDPOINT_XFER_BULK:
+				s = "-bulk"; break;
+			case USB_ENDPOINT_XFER_INT:
+				s = "-int"; break;
+			case USB_ENDPOINT_XFER_CONTROL:
+				s = ""; break;
+			default:
+				s = "iso"; break;
+			}; s; }),
+			qh->maxpacket);
+	if (count <= 0)
+		return 0;
+	buf += count;
+	max -= count;
+
+	list_for_each_entry(urb, &hep->urb_list, urb_list) {
+		tmp = snprintf(buf, max, "\t%s urb %p %d/%d\n",
+				usb_pipein(urb->pipe) ? "in" : "out",
+				urb, urb->actual_length,
+				urb->transfer_buffer_length);
+		if (tmp <= 0)
+			break;
+		tmp = min(tmp, (int)max);
+		count += tmp;
+		buf += tmp;
+		max -= tmp;
+	}
+	return count;
+}
+
+static int
+dump_queue(struct list_head *q, char *buf, unsigned max)
+{
+	int		count = 0;
+	struct musb_qh	*qh;
+
+	list_for_each_entry(qh, q, ring) {
+		int	tmp;
+
+		tmp = dump_qh(qh, buf, max);
+		if (tmp <= 0)
+			break;
+		tmp = min(tmp, (int)max);
+		count += tmp;
+		buf += tmp;
+		max -= tmp;
+	}
+	return count;
+}
+
+#endif	/* HCD */
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+static int dump_ep(struct musb_ep *ep, char *buffer, unsigned max)
+{
+	char		*buf = buffer;
+	int		code = 0;
+	void __iomem	*regs = ep->hw_ep->regs;
+	char		*mode = "1buf";
+
+	if (ep->is_in) {
+		if (ep->hw_ep->tx_double_buffered)
+			mode = "2buf";
+	} else {
+		if (ep->hw_ep->rx_double_buffered)
+			mode = "2buf";
+	}
+
+	do {
+		struct usb_request	*req;
+
+		code = snprintf(buf, max,
+				"\n%s (hw%d): %s%s, csr %04x maxp %04x\n",
+				ep->name, ep->current_epnum,
+				mode, ep->dma ? " dma" : "",
+				musb_readw(regs,
+					(ep->is_in || !ep->current_epnum)
+						? MUSB_TXCSR
+						: MUSB_RXCSR),
+				musb_readw(regs, ep->is_in
+						? MUSB_TXMAXP
+						: MUSB_RXMAXP)
+				);
+		if (code <= 0)
+			break;
+		code = min(code, (int) max);
+		buf += code;
+		max -= code;
+
+		if (is_cppi_enabled() && ep->current_epnum) {
+			unsigned	cppi = ep->current_epnum - 1;
+			void __iomem	*base = ep->musb->ctrl_base;
+			unsigned	off1 = cppi << 2;
+			void __iomem	*ram = base;
+			char		tmp[16];
+
+			if (ep->is_in) {
+				ram += DAVINCI_TXCPPI_STATERAM_OFFSET(cppi);
+				tmp[0] = 0;
+			} else {
+				ram += DAVINCI_RXCPPI_STATERAM_OFFSET(cppi);
+				snprintf(tmp, sizeof tmp, "%d left, ",
+					musb_readl(base,
+					DAVINCI_RXCPPI_BUFCNT0_REG + off1));
+			}
+
+			code = snprintf(buf, max, "%cX DMA%d: %s"
+					"%08x %08x, %08x %08x; "
+					"%08x %08x %08x .. %08x\n",
+				ep->is_in ? 'T' : 'R',
+				ep->current_epnum - 1, tmp,
+				musb_readl(ram, 0 * 4),
+				musb_readl(ram, 1 * 4),
+				musb_readl(ram, 2 * 4),
+				musb_readl(ram, 3 * 4),
+				musb_readl(ram, 4 * 4),
+				musb_readl(ram, 5 * 4),
+				musb_readl(ram, 6 * 4),
+				musb_readl(ram, 7 * 4));
+			if (code <= 0)
+				break;
+			code = min(code, (int) max);
+			buf += code;
+			max -= code;
+		}
+
+		if (list_empty(&ep->req_list)) {
+			code = snprintf(buf, max, "\t(queue empty)\n");
+			if (code <= 0)
+				break;
+			code = min(code, (int) max);
+			buf += code;
+			max -= code;
+			break;
+		}
+		list_for_each_entry(req, &ep->req_list, list) {
+			code = snprintf(buf, max, "\treq %p, %s%s%d/%d\n",
+					req,
+					req->zero ? "zero, " : "",
+					req->short_not_ok ? "!short, " : "",
+					req->actual, req->length);
+			if (code <= 0)
+				break;
+			code = min(code, (int) max);
+			buf += code;
+			max -= code;
+		}
+	} while (0);
+	return buf - buffer;
+}
+#endif
+
+static int
+dump_end_info(struct musb *musb, u8 epnum, char *aBuffer, unsigned max)
+{
+	int			code = 0;
+	char			*buf = aBuffer;
+	struct musb_hw_ep	*hw_ep = &musb->endpoints[epnum];
+
+	do {
+		musb_ep_select(musb->mregs, epnum);
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+		if (is_host_active(musb)) {
+			int		dump_rx, dump_tx;
+			void __iomem	*regs = hw_ep->regs;
+
+			/* TEMPORARY (!) until we have a real periodic
+			 * schedule tree ...
+			 */
+			if (!epnum) {
+				/* control is shared, uses RX queue
+				 * but (mostly) shadowed tx registers
+				 */
+				dump_tx = !list_empty(&musb->control);
+				dump_rx = 0;
+			} else if (hw_ep == musb->bulk_ep) {
+				dump_tx = !list_empty(&musb->out_bulk);
+				dump_rx = !list_empty(&musb->in_bulk);
+			} else if (musb->periodic[epnum]) {
+				struct usb_host_endpoint	*hep;
+
+				hep = musb->periodic[epnum]->hep;
+				dump_rx = hep->desc.bEndpointAddress
+						& USB_ENDPOINT_DIR_MASK;
+				dump_tx = !dump_rx;
+			} else
+				break;
+			/* END TEMPORARY */
+
+
+			if (dump_rx) {
+				code = snprintf(buf, max,
+					"\nRX%d: %s rxcsr %04x interval %02x "
+					"max %04x type %02x; "
+					"dev %d hub %d port %d"
+					"\n",
+					epnum,
+					hw_ep->rx_double_buffered
+						? "2buf" : "1buf",
+					musb_readw(regs, MUSB_RXCSR),
+					musb_readb(regs, MUSB_RXINTERVAL),
+					musb_readw(regs, MUSB_RXMAXP),
+					musb_readb(regs, MUSB_RXTYPE),
+					/* FIXME:  assumes multipoint */
+					musb_readb(musb->mregs,
+						MUSB_BUSCTL_OFFSET(epnum,
+						MUSB_RXFUNCADDR)),
+					musb_readb(musb->mregs,
+						MUSB_BUSCTL_OFFSET(epnum,
+						MUSB_RXHUBADDR)),
+					musb_readb(musb->mregs,
+						MUSB_BUSCTL_OFFSET(epnum,
+						MUSB_RXHUBPORT))
+					);
+				if (code <= 0)
+					break;
+				code = min(code, (int) max);
+				buf += code;
+				max -= code;
+
+				if (is_cppi_enabled()
+						&& epnum
+						&& hw_ep->rx_channel) {
+					unsigned	cppi = epnum - 1;
+					unsigned	off1 = cppi << 2;
+					void __iomem	*base;
+					void __iomem	*ram;
+					char		tmp[16];
+
+					base = musb->ctrl_base;
+					ram = DAVINCI_RXCPPI_STATERAM_OFFSET(
+							cppi) + base;
+					snprintf(tmp, sizeof tmp, "%d left, ",
+						musb_readl(base,
+						DAVINCI_RXCPPI_BUFCNT0_REG
+								+ off1));
+
+					code = snprintf(buf, max,
+						"    rx dma%d: %s"
+						"%08x %08x, %08x %08x; "
+						"%08x %08x %08x .. %08x\n",
+						cppi, tmp,
+						musb_readl(ram, 0 * 4),
+						musb_readl(ram, 1 * 4),
+						musb_readl(ram, 2 * 4),
+						musb_readl(ram, 3 * 4),
+						musb_readl(ram, 4 * 4),
+						musb_readl(ram, 5 * 4),
+						musb_readl(ram, 6 * 4),
+						musb_readl(ram, 7 * 4));
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				}
+
+				if (hw_ep == musb->bulk_ep
+						&& !list_empty(
+							&musb->in_bulk)) {
+					code = dump_queue(&musb->in_bulk,
+							buf, max);
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				} else if (musb->periodic[epnum]) {
+					code = dump_qh(musb->periodic[epnum],
+							buf, max);
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				}
+			}
+
+			if (dump_tx) {
+				code = snprintf(buf, max,
+					"\nTX%d: %s txcsr %04x interval %02x "
+					"max %04x type %02x; "
+					"dev %d hub %d port %d"
+					"\n",
+					epnum,
+					hw_ep->tx_double_buffered
+						? "2buf" : "1buf",
+					musb_readw(regs, MUSB_TXCSR),
+					musb_readb(regs, MUSB_TXINTERVAL),
+					musb_readw(regs, MUSB_TXMAXP),
+					musb_readb(regs, MUSB_TXTYPE),
+					/* FIXME:  assumes multipoint */
+					musb_readb(musb->mregs,
+						MUSB_BUSCTL_OFFSET(epnum,
+						MUSB_TXFUNCADDR)),
+					musb_readb(musb->mregs,
+						MUSB_BUSCTL_OFFSET(epnum,
+						MUSB_TXHUBADDR)),
+					musb_readb(musb->mregs,
+						MUSB_BUSCTL_OFFSET(epnum,
+						MUSB_TXHUBPORT))
+					);
+				if (code <= 0)
+					break;
+				code = min(code, (int) max);
+				buf += code;
+				max -= code;
+
+				if (is_cppi_enabled()
+						&& epnum
+						&& hw_ep->tx_channel) {
+					unsigned	cppi = epnum - 1;
+					void __iomem	*base;
+					void __iomem	*ram;
+
+					base = musb->ctrl_base;
+					ram = DAVINCI_RXCPPI_STATERAM_OFFSET(
+							cppi) + base;
+					code = snprintf(buf, max,
+						"    tx dma%d: "
+						"%08x %08x, %08x %08x; "
+						"%08x %08x %08x .. %08x\n",
+						cppi,
+						musb_readl(ram, 0 * 4),
+						musb_readl(ram, 1 * 4),
+						musb_readl(ram, 2 * 4),
+						musb_readl(ram, 3 * 4),
+						musb_readl(ram, 4 * 4),
+						musb_readl(ram, 5 * 4),
+						musb_readl(ram, 6 * 4),
+						musb_readl(ram, 7 * 4));
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				}
+
+				if (hw_ep == musb->control_ep
+						&& !list_empty(
+							&musb->control)) {
+					code = dump_queue(&musb->control,
+							buf, max);
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				} else if (hw_ep == musb->bulk_ep
+						&& !list_empty(
+							&musb->out_bulk)) {
+					code = dump_queue(&musb->out_bulk,
+							buf, max);
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				} else if (musb->periodic[epnum]) {
+					code = dump_qh(musb->periodic[epnum],
+							buf, max);
+					if (code <= 0)
+						break;
+					code = min(code, (int) max);
+					buf += code;
+					max -= code;
+				}
+			}
+		}
+#endif
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		if (is_peripheral_active(musb)) {
+			code = 0;
+
+			if (hw_ep->ep_in.desc || !epnum) {
+				code = dump_ep(&hw_ep->ep_in, buf, max);
+				if (code <= 0)
+					break;
+				code = min(code, (int) max);
+				buf += code;
+				max -= code;
+			}
+			if (hw_ep->ep_out.desc) {
+				code = dump_ep(&hw_ep->ep_out, buf, max);
+				if (code <= 0)
+					break;
+				code = min(code, (int) max);
+				buf += code;
+				max -= code;
+			}
+		}
+#endif
+	} while (0);
+
+	return buf - aBuffer;
+}
+
+/* Dump the current status and compile options.
+ * @param musb the device driver instance
+ * @param buffer where to dump the status; it must be big enough to hold the
+ * result otherwise "BAD THINGS HAPPENS(TM)".
+ */
+static int dump_header_stats(struct musb *musb, char *buffer)
+{
+	int code, count = 0;
+	const void __iomem *mbase = musb->mregs;
+
+	*buffer = 0;
+	count = sprintf(buffer, "Status: %sHDRC, Mode=%s "
+				"(Power=%02x, DevCtl=%02x)\n",
+			(musb->is_multipoint ? "M" : ""), MUSB_MODE(musb),
+			musb_readb(mbase, MUSB_POWER),
+			musb_readb(mbase, MUSB_DEVCTL));
+	if (count <= 0)
+		return 0;
+	buffer += count;
+
+	code = sprintf(buffer, "OTG state: %s; %sactive\n",
+			otg_state_string(musb),
+			musb->is_active ? "" : "in");
+	if (code <= 0)
+		goto done;
+	buffer += code;
+	count += code;
+
+	code = sprintf(buffer,
+			"Options: "
+#ifdef CONFIG_MUSB_PIO_ONLY
+			"pio"
+#elif defined(CONFIG_USB_TI_CPPI_DMA)
+			"cppi-dma"
+#elif defined(CONFIG_USB_INVENTRA_DMA)
+			"musb-dma"
+#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
+			"tusb-omap-dma"
+#else
+			"?dma?"
+#endif
+			", "
+#ifdef CONFIG_USB_MUSB_OTG
+			"otg (peripheral+host)"
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+			"peripheral"
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+			"host"
+#endif
+			", debug=%d [eps=%d]\n",
+		debug,
+		musb->nr_endpoints);
+	if (code <= 0)
+		goto done;
+	count += code;
+	buffer += code;
+
+#ifdef	CONFIG_USB_GADGET_MUSB_HDRC
+	code = sprintf(buffer, "Peripheral address: %02x\n",
+			musb_readb(musb->ctrl_base, MUSB_FADDR));
+	if (code <= 0)
+		goto done;
+	buffer += code;
+	count += code;
+#endif
+
+#ifdef	CONFIG_USB_MUSB_HDRC_HCD
+	code = sprintf(buffer, "Root port status: %08x\n",
+			musb->port1_status);
+	if (code <= 0)
+		goto done;
+	buffer += code;
+	count += code;
+#endif
+
+#ifdef	CONFIG_ARCH_DAVINCI
+	code = sprintf(buffer,
+			"DaVinci: ctrl=%02x stat=%1x phy=%03x\n"
+			"\trndis=%05x auto=%04x intsrc=%08x intmsk=%08x"
+			"\n",
+			musb_readl(musb->ctrl_base, DAVINCI_USB_CTRL_REG),
+			musb_readl(musb->ctrl_base, DAVINCI_USB_STAT_REG),
+			__raw_readl((void __force __iomem *)
+					IO_ADDRESS(USBPHY_CTL_PADDR)),
+			musb_readl(musb->ctrl_base, DAVINCI_RNDIS_REG),
+			musb_readl(musb->ctrl_base, DAVINCI_AUTOREQ_REG),
+			musb_readl(musb->ctrl_base,
+					DAVINCI_USB_INT_SOURCE_REG),
+			musb_readl(musb->ctrl_base,
+					DAVINCI_USB_INT_MASK_REG));
+	if (code <= 0)
+		goto done;
+	count += code;
+	buffer += code;
+#endif	/* DAVINCI */
+
+#ifdef CONFIG_USB_TUSB6010
+	code = sprintf(buffer,
+			"TUSB6010: devconf %08x, phy enable %08x drive %08x"
+			"\n\totg %03x timer %08x"
+			"\n\tprcm conf %08x mgmt %08x; int src %08x mask %08x"
+			"\n",
+			musb_readl(musb->ctrl_base, TUSB_DEV_CONF),
+			musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL_ENABLE),
+			musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL),
+			musb_readl(musb->ctrl_base, TUSB_DEV_OTG_STAT),
+			musb_readl(musb->ctrl_base, TUSB_DEV_OTG_TIMER),
+			musb_readl(musb->ctrl_base, TUSB_PRCM_CONF),
+			musb_readl(musb->ctrl_base, TUSB_PRCM_MNGMT),
+			musb_readl(musb->ctrl_base, TUSB_INT_SRC),
+			musb_readl(musb->ctrl_base, TUSB_INT_MASK));
+	if (code <= 0)
+		goto done;
+	count += code;
+	buffer += code;
+#endif	/* DAVINCI */
+
+	if (is_cppi_enabled() && musb->dma_controller) {
+		code = sprintf(buffer,
+				"CPPI: txcr=%d txsrc=%01x txena=%01x; "
+				"rxcr=%d rxsrc=%01x rxena=%01x "
+				"\n",
+				musb_readl(musb->ctrl_base,
+						DAVINCI_TXCPPI_CTRL_REG),
+				musb_readl(musb->ctrl_base,
+						DAVINCI_TXCPPI_RAW_REG),
+				musb_readl(musb->ctrl_base,
+						DAVINCI_TXCPPI_INTENAB_REG),
+				musb_readl(musb->ctrl_base,
+						DAVINCI_RXCPPI_CTRL_REG),
+				musb_readl(musb->ctrl_base,
+						DAVINCI_RXCPPI_RAW_REG),
+				musb_readl(musb->ctrl_base,
+						DAVINCI_RXCPPI_INTENAB_REG));
+		if (code <= 0)
+			goto done;
+		count += code;
+		buffer += code;
+	}
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	if (is_peripheral_enabled(musb)) {
+		code = sprintf(buffer, "Gadget driver: %s\n",
+				musb->gadget_driver
+					? musb->gadget_driver->driver.name
+					: "(none)");
+		if (code <= 0)
+			goto done;
+		count += code;
+		buffer += code;
+	}
+#endif
+
+done:
+	return count;
+}
+
+/* Write to ProcFS
+ *
+ * C soft-connect
+ * c soft-disconnect
+ * I enable HS
+ * i disable HS
+ * s stop session
+ * F force session (OTG-unfriendly)
+ * E rElinquish bus (OTG)
+ * H request host mode
+ * h cancel host request
+ * T start sending TEST_PACKET
+ * D<num> set/query the debug level
+ */
+static int musb_proc_write(struct file *file, const char __user *buffer,
+			unsigned long count, void *data)
+{
+	char cmd;
+	u8 reg;
+	struct musb *musb = (struct musb *)data;
+	void __iomem *mbase = musb->mregs;
+
+	/* MOD_INC_USE_COUNT; */
+
+	if (unlikely(copy_from_user(&cmd, buffer, 1)))
+		return -EFAULT;
+
+	switch (cmd) {
+	case 'C':
+		if (mbase) {
+			reg = musb_readb(mbase, MUSB_POWER)
+					| MUSB_POWER_SOFTCONN;
+			musb_writeb(mbase, MUSB_POWER, reg);
+		}
+		break;
+
+	case 'c':
+		if (mbase) {
+			reg = musb_readb(mbase, MUSB_POWER)
+					& ~MUSB_POWER_SOFTCONN;
+			musb_writeb(mbase, MUSB_POWER, reg);
+		}
+		break;
+
+	case 'I':
+		if (mbase) {
+			reg = musb_readb(mbase, MUSB_POWER)
+					| MUSB_POWER_HSENAB;
+			musb_writeb(mbase, MUSB_POWER, reg);
+		}
+		break;
+
+	case 'i':
+		if (mbase) {
+			reg = musb_readb(mbase, MUSB_POWER)
+					& ~MUSB_POWER_HSENAB;
+			musb_writeb(mbase, MUSB_POWER, reg);
+		}
+		break;
+
+	case 'F':
+		reg = musb_readb(mbase, MUSB_DEVCTL);
+		reg |= MUSB_DEVCTL_SESSION;
+		musb_writeb(mbase, MUSB_DEVCTL, reg);
+		break;
+
+	case 'H':
+		if (mbase) {
+			reg = musb_readb(mbase, MUSB_DEVCTL);
+			reg |= MUSB_DEVCTL_HR;
+			musb_writeb(mbase, MUSB_DEVCTL, reg);
+			/* MUSB_HST_MODE( ((struct musb*)data) ); */
+			/* WARNING("Host Mode\n"); */
+		}
+		break;
+
+	case 'h':
+		if (mbase) {
+			reg = musb_readb(mbase, MUSB_DEVCTL);
+			reg &= ~MUSB_DEVCTL_HR;
+			musb_writeb(mbase, MUSB_DEVCTL, reg);
+		}
+		break;
+
+	case 'T':
+		if (mbase) {
+			musb_load_testpacket(musb);
+			musb_writeb(mbase, MUSB_TESTMODE,
+					MUSB_TEST_PACKET);
+		}
+		break;
+
+#if (MUSB_DEBUG > 0)
+		/* set/read debug level */
+	case 'D':{
+			if (count > 1) {
+				char digits[8], *p = digits;
+				int i = 0, level = 0, sign = 1;
+				int len = min(count - 1, (unsigned long)8);
+
+				if (copy_from_user(&digits, &buffer[1], len))
+					return -EFAULT;
+
+				/* optional sign */
+				if (*p == '-') {
+					len -= 1;
+					sign = -sign;
+					p++;
+				}
+
+				/* read it */
+				while (i++ < len && *p > '0' && *p < '9') {
+					level = level * 10 + (*p - '0');
+					p++;
+				}
+
+				level *= sign;
+				DBG(1, "debug level %d\n", level);
+				debug = level;
+			}
+		}
+		break;
+
+
+	case '?':
+		INFO("?: you are seeing it\n");
+		INFO("C/c: soft connect enable/disable\n");
+		INFO("I/i: hispeed enable/disable\n");
+		INFO("F: force session start\n");
+		INFO("H: host mode\n");
+		INFO("T: start sending TEST_PACKET\n");
+		INFO("D: set/read dbug level\n");
+		break;
+#endif
+
+	default:
+		ERR("Command %c not implemented\n", cmd);
+		break;
+	}
+
+	musb_platform_try_idle(musb, 0);
+
+	return count;
+}
+
+static int musb_proc_read(char *page, char **start,
+			off_t off, int count, int *eof, void *data)
+{
+	char *buffer = page;
+	int code = 0;
+	unsigned long	flags;
+	struct musb	*musb = data;
+	unsigned	epnum;
+
+	count -= off;
+	count -= 1;		/* for NUL at end */
+	if (count <= 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	code = dump_header_stats(musb, buffer);
+	if (code > 0) {
+		buffer += code;
+		count -= code;
+	}
+
+	/* generate the report for the end points */
+	/* REVISIT ... not unless something's connected! */
+	for (epnum = 0; count >= 0 && epnum < musb->nr_endpoints;
+			epnum++) {
+		code = dump_end_info(musb, epnum, buffer, count);
+		if (code > 0) {
+			buffer += code;
+			count -= code;
+		}
+	}
+
+	musb_platform_try_idle(musb, 0);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+	*eof = 1;
+
+	return buffer - page;
+}
+
+void __devexit musb_debug_delete(char *name, struct musb *musb)
+{
+	if (musb->proc_entry)
+		remove_proc_entry(name, NULL);
+}
+
+struct proc_dir_entry *__init
+musb_debug_create(char *name, struct musb *data)
+{
+	struct proc_dir_entry	*pde;
+
+	/* FIXME convert everything to seq_file; then later, debugfs */
+
+	if (!name)
+		return NULL;
+
+	pde = create_proc_entry(name, S_IFREG | S_IRUGO | S_IWUSR, NULL);
+	data->proc_entry = pde;
+	if (pde) {
+		pde->data = data;
+		/* pde->owner = THIS_MODULE; */
+
+		pde->read_proc = musb_proc_read;
+		pde->write_proc = musb_proc_write;
+
+		pde->size = 0;
+
+		pr_debug("Registered /proc/%s\n", name);
+	} else {
+		pr_debug("Cannot create a valid proc file entry");
+	}
+
+	return pde;
+}
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
new file mode 100644
index 00000000000..9c228661aa5
--- /dev/null
+++ b/drivers/usb/musb/musb_regs.h
@@ -0,0 +1,300 @@
+/*
+ * MUSB OTG driver register defines
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __MUSB_REGS_H__
+#define __MUSB_REGS_H__
+
+#define MUSB_EP0_FIFOSIZE	64	/* This is non-configurable */
+
+/*
+ * Common USB registers
+ */
+
+#define MUSB_FADDR		0x00	/* 8-bit */
+#define MUSB_POWER		0x01	/* 8-bit */
+
+#define MUSB_INTRTX		0x02	/* 16-bit */
+#define MUSB_INTRRX		0x04
+#define MUSB_INTRTXE		0x06
+#define MUSB_INTRRXE		0x08
+#define MUSB_INTRUSB		0x0A	/* 8 bit */
+#define MUSB_INTRUSBE		0x0B	/* 8 bit */
+#define MUSB_FRAME		0x0C
+#define MUSB_INDEX		0x0E	/* 8 bit */
+#define MUSB_TESTMODE		0x0F	/* 8 bit */
+
+/* Get offset for a given FIFO from musb->mregs */
+#ifdef	CONFIG_USB_TUSB6010
+#define MUSB_FIFO_OFFSET(epnum)	(0x200 + ((epnum) * 0x20))
+#else
+#define MUSB_FIFO_OFFSET(epnum)	(0x20 + ((epnum) * 4))
+#endif
+
+/*
+ * Additional Control Registers
+ */
+
+#define MUSB_DEVCTL		0x60	/* 8 bit */
+
+/* These are always controlled through the INDEX register */
+#define MUSB_TXFIFOSZ		0x62	/* 8-bit (see masks) */
+#define MUSB_RXFIFOSZ		0x63	/* 8-bit (see masks) */
+#define MUSB_TXFIFOADD		0x64	/* 16-bit offset shifted right 3 */
+#define MUSB_RXFIFOADD		0x66	/* 16-bit offset shifted right 3 */
+
+/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
+#define MUSB_HWVERS		0x6C	/* 8 bit */
+
+#define MUSB_EPINFO		0x78	/* 8 bit */
+#define MUSB_RAMINFO		0x79	/* 8 bit */
+#define MUSB_LINKINFO		0x7a	/* 8 bit */
+#define MUSB_VPLEN		0x7b	/* 8 bit */
+#define MUSB_HS_EOF1		0x7c	/* 8 bit */
+#define MUSB_FS_EOF1		0x7d	/* 8 bit */
+#define MUSB_LS_EOF1		0x7e	/* 8 bit */
+
+/* Offsets to endpoint registers */
+#define MUSB_TXMAXP		0x00
+#define MUSB_TXCSR		0x02
+#define MUSB_CSR0		MUSB_TXCSR	/* Re-used for EP0 */
+#define MUSB_RXMAXP		0x04
+#define MUSB_RXCSR		0x06
+#define MUSB_RXCOUNT		0x08
+#define MUSB_COUNT0		MUSB_RXCOUNT	/* Re-used for EP0 */
+#define MUSB_TXTYPE		0x0A
+#define MUSB_TYPE0		MUSB_TXTYPE	/* Re-used for EP0 */
+#define MUSB_TXINTERVAL		0x0B
+#define MUSB_NAKLIMIT0		MUSB_TXINTERVAL	/* Re-used for EP0 */
+#define MUSB_RXTYPE		0x0C
+#define MUSB_RXINTERVAL		0x0D
+#define MUSB_FIFOSIZE		0x0F
+#define MUSB_CONFIGDATA		MUSB_FIFOSIZE	/* Re-used for EP0 */
+
+/* Offsets to endpoint registers in indexed model (using INDEX register) */
+#define MUSB_INDEXED_OFFSET(_epnum, _offset)	\
+	(0x10 + (_offset))
+
+/* Offsets to endpoint registers in flat models */
+#define MUSB_FLAT_OFFSET(_epnum, _offset)	\
+	(0x100 + (0x10*(_epnum)) + (_offset))
+
+#ifdef CONFIG_USB_TUSB6010
+/* TUSB6010 EP0 configuration register is special */
+#define MUSB_TUSB_OFFSET(_epnum, _offset)	\
+	(0x10 + _offset)
+#include "tusb6010.h"		/* Needed "only" for TUSB_EP0_CONF */
+#endif
+
+/* "bus control"/target registers, for host side multipoint (external hubs) */
+#define MUSB_TXFUNCADDR		0x00
+#define MUSB_TXHUBADDR		0x02
+#define MUSB_TXHUBPORT		0x03
+
+#define MUSB_RXFUNCADDR		0x04
+#define MUSB_RXHUBADDR		0x06
+#define MUSB_RXHUBPORT		0x07
+
+#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
+	(0x80 + (8*(_epnum)) + (_offset))
+
+/*
+ * MUSB Register bits
+ */
+
+/* POWER */
+#define MUSB_POWER_ISOUPDATE	0x80
+#define MUSB_POWER_SOFTCONN	0x40
+#define MUSB_POWER_HSENAB	0x20
+#define MUSB_POWER_HSMODE	0x10
+#define MUSB_POWER_RESET	0x08
+#define MUSB_POWER_RESUME	0x04
+#define MUSB_POWER_SUSPENDM	0x02
+#define MUSB_POWER_ENSUSPEND	0x01
+
+/* INTRUSB */
+#define MUSB_INTR_SUSPEND	0x01
+#define MUSB_INTR_RESUME	0x02
+#define MUSB_INTR_RESET		0x04
+#define MUSB_INTR_BABBLE	0x04
+#define MUSB_INTR_SOF		0x08
+#define MUSB_INTR_CONNECT	0x10
+#define MUSB_INTR_DISCONNECT	0x20
+#define MUSB_INTR_SESSREQ	0x40
+#define MUSB_INTR_VBUSERROR	0x80	/* For SESSION end */
+
+/* DEVCTL */
+#define MUSB_DEVCTL_BDEVICE	0x80
+#define MUSB_DEVCTL_FSDEV	0x40
+#define MUSB_DEVCTL_LSDEV	0x20
+#define MUSB_DEVCTL_VBUS	0x18
+#define MUSB_DEVCTL_VBUS_SHIFT	3
+#define MUSB_DEVCTL_HM		0x04
+#define MUSB_DEVCTL_HR		0x02
+#define MUSB_DEVCTL_SESSION	0x01
+
+/* TESTMODE */
+#define MUSB_TEST_FORCE_HOST	0x80
+#define MUSB_TEST_FIFO_ACCESS	0x40
+#define MUSB_TEST_FORCE_FS	0x20
+#define MUSB_TEST_FORCE_HS	0x10
+#define MUSB_TEST_PACKET	0x08
+#define MUSB_TEST_K		0x04
+#define MUSB_TEST_J		0x02
+#define MUSB_TEST_SE0_NAK	0x01
+
+/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
+#define MUSB_FIFOSZ_DPB	0x10
+/* Allocation size (8, 16, 32, ... 4096) */
+#define MUSB_FIFOSZ_SIZE	0x0f
+
+/* CSR0 */
+#define MUSB_CSR0_FLUSHFIFO	0x0100
+#define MUSB_CSR0_TXPKTRDY	0x0002
+#define MUSB_CSR0_RXPKTRDY	0x0001
+
+/* CSR0 in Peripheral mode */
+#define MUSB_CSR0_P_SVDSETUPEND	0x0080
+#define MUSB_CSR0_P_SVDRXPKTRDY	0x0040
+#define MUSB_CSR0_P_SENDSTALL	0x0020
+#define MUSB_CSR0_P_SETUPEND	0x0010
+#define MUSB_CSR0_P_DATAEND	0x0008
+#define MUSB_CSR0_P_SENTSTALL	0x0004
+
+/* CSR0 in Host mode */
+#define MUSB_CSR0_H_DIS_PING		0x0800
+#define MUSB_CSR0_H_WR_DATATOGGLE	0x0400	/* Set to allow setting: */
+#define MUSB_CSR0_H_DATATOGGLE		0x0200	/* Data toggle control */
+#define MUSB_CSR0_H_NAKTIMEOUT		0x0080
+#define MUSB_CSR0_H_STATUSPKT		0x0040
+#define MUSB_CSR0_H_REQPKT		0x0020
+#define MUSB_CSR0_H_ERROR		0x0010
+#define MUSB_CSR0_H_SETUPPKT		0x0008
+#define MUSB_CSR0_H_RXSTALL		0x0004
+
+/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_CSR0_P_WZC_BITS	\
+	(MUSB_CSR0_P_SENTSTALL)
+#define MUSB_CSR0_H_WZC_BITS	\
+	(MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
+	| MUSB_CSR0_RXPKTRDY)
+
+/* TxType/RxType */
+#define MUSB_TYPE_SPEED		0xc0
+#define MUSB_TYPE_SPEED_SHIFT	6
+#define MUSB_TYPE_PROTO		0x30	/* Implicitly zero for ep0 */
+#define MUSB_TYPE_PROTO_SHIFT	4
+#define MUSB_TYPE_REMOTE_END	0xf	/* Implicitly zero for ep0 */
+
+/* CONFIGDATA */
+#define MUSB_CONFIGDATA_MPRXE		0x80	/* Auto bulk pkt combining */
+#define MUSB_CONFIGDATA_MPTXE		0x40	/* Auto bulk pkt splitting */
+#define MUSB_CONFIGDATA_BIGENDIAN	0x20
+#define MUSB_CONFIGDATA_HBRXE		0x10	/* HB-ISO for RX */
+#define MUSB_CONFIGDATA_HBTXE		0x08	/* HB-ISO for TX */
+#define MUSB_CONFIGDATA_DYNFIFO		0x04	/* Dynamic FIFO sizing */
+#define MUSB_CONFIGDATA_SOFTCONE	0x02	/* SoftConnect */
+#define MUSB_CONFIGDATA_UTMIDW		0x01	/* Data width 0/1 => 8/16bits */
+
+/* TXCSR in Peripheral and Host mode */
+#define MUSB_TXCSR_AUTOSET		0x8000
+#define MUSB_TXCSR_MODE			0x2000
+#define MUSB_TXCSR_DMAENAB		0x1000
+#define MUSB_TXCSR_FRCDATATOG		0x0800
+#define MUSB_TXCSR_DMAMODE		0x0400
+#define MUSB_TXCSR_CLRDATATOG		0x0040
+#define MUSB_TXCSR_FLUSHFIFO		0x0008
+#define MUSB_TXCSR_FIFONOTEMPTY		0x0002
+#define MUSB_TXCSR_TXPKTRDY		0x0001
+
+/* TXCSR in Peripheral mode */
+#define MUSB_TXCSR_P_ISO		0x4000
+#define MUSB_TXCSR_P_INCOMPTX		0x0080
+#define MUSB_TXCSR_P_SENTSTALL		0x0020
+#define MUSB_TXCSR_P_SENDSTALL		0x0010
+#define MUSB_TXCSR_P_UNDERRUN		0x0004
+
+/* TXCSR in Host mode */
+#define MUSB_TXCSR_H_WR_DATATOGGLE	0x0200
+#define MUSB_TXCSR_H_DATATOGGLE		0x0100
+#define MUSB_TXCSR_H_NAKTIMEOUT		0x0080
+#define MUSB_TXCSR_H_RXSTALL		0x0020
+#define MUSB_TXCSR_H_ERROR		0x0004
+
+/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_TXCSR_P_WZC_BITS	\
+	(MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
+	| MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
+#define MUSB_TXCSR_H_WZC_BITS	\
+	(MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
+	| MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
+
+/* RXCSR in Peripheral and Host mode */
+#define MUSB_RXCSR_AUTOCLEAR		0x8000
+#define MUSB_RXCSR_DMAENAB		0x2000
+#define MUSB_RXCSR_DISNYET		0x1000
+#define MUSB_RXCSR_PID_ERR		0x1000
+#define MUSB_RXCSR_DMAMODE		0x0800
+#define MUSB_RXCSR_INCOMPRX		0x0100
+#define MUSB_RXCSR_CLRDATATOG		0x0080
+#define MUSB_RXCSR_FLUSHFIFO		0x0010
+#define MUSB_RXCSR_DATAERROR		0x0008
+#define MUSB_RXCSR_FIFOFULL		0x0002
+#define MUSB_RXCSR_RXPKTRDY		0x0001
+
+/* RXCSR in Peripheral mode */
+#define MUSB_RXCSR_P_ISO		0x4000
+#define MUSB_RXCSR_P_SENTSTALL		0x0040
+#define MUSB_RXCSR_P_SENDSTALL		0x0020
+#define MUSB_RXCSR_P_OVERRUN		0x0004
+
+/* RXCSR in Host mode */
+#define MUSB_RXCSR_H_AUTOREQ		0x4000
+#define MUSB_RXCSR_H_WR_DATATOGGLE	0x0400
+#define MUSB_RXCSR_H_DATATOGGLE		0x0200
+#define MUSB_RXCSR_H_RXSTALL		0x0040
+#define MUSB_RXCSR_H_REQPKT		0x0020
+#define MUSB_RXCSR_H_ERROR		0x0004
+
+/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_RXCSR_P_WZC_BITS	\
+	(MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
+	| MUSB_RXCSR_RXPKTRDY)
+#define MUSB_RXCSR_H_WZC_BITS	\
+	(MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
+	| MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
+
+/* HUBADDR */
+#define MUSB_HUBADDR_MULTI_TT		0x80
+
+#endif	/* __MUSB_REGS_H__ */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
new file mode 100644
index 00000000000..e0e9ce58417
--- /dev/null
+++ b/drivers/usb/musb/musb_virthub.c
@@ -0,0 +1,425 @@
+/*
+ * MUSB OTG driver virtual root hub support
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2006 by Texas Instruments
+ * Copyright (C) 2006-2007 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+
+#include <asm/unaligned.h>
+
+#include "musb_core.h"
+
+
+static void musb_port_suspend(struct musb *musb, bool do_suspend)
+{
+	u8		power;
+	void __iomem	*mbase = musb->mregs;
+
+	if (!is_host_active(musb))
+		return;
+
+	/* NOTE:  this doesn't necessarily put PHY into low power mode,
+	 * turning off its clock; that's a function of PHY integration and
+	 * MUSB_POWER_ENSUSPEND.  PHY may need a clock (sigh) to detect
+	 * SE0 changing to connect (J) or wakeup (K) states.
+	 */
+	power = musb_readb(mbase, MUSB_POWER);
+	if (do_suspend) {
+		int retries = 10000;
+
+		power &= ~MUSB_POWER_RESUME;
+		power |= MUSB_POWER_SUSPENDM;
+		musb_writeb(mbase, MUSB_POWER, power);
+
+		/* Needed for OPT A tests */
+		power = musb_readb(mbase, MUSB_POWER);
+		while (power & MUSB_POWER_SUSPENDM) {
+			power = musb_readb(mbase, MUSB_POWER);
+			if (retries-- < 1)
+				break;
+		}
+
+		DBG(3, "Root port suspended, power %02x\n", power);
+
+		musb->port1_status |= USB_PORT_STAT_SUSPEND;
+		switch (musb->xceiv.state) {
+		case OTG_STATE_A_HOST:
+			musb->xceiv.state = OTG_STATE_A_SUSPEND;
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.host->b_hnp_enable;
+			musb_platform_try_idle(musb, 0);
+			break;
+#ifdef	CONFIG_USB_MUSB_OTG
+		case OTG_STATE_B_HOST:
+			musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
+			musb->is_active = is_otg_enabled(musb)
+					&& musb->xceiv.host->b_hnp_enable;
+			musb_platform_try_idle(musb, 0);
+			break;
+#endif
+		default:
+			DBG(1, "bogus rh suspend? %s\n",
+				otg_state_string(musb));
+		}
+	} else if (power & MUSB_POWER_SUSPENDM) {
+		power &= ~MUSB_POWER_SUSPENDM;
+		power |= MUSB_POWER_RESUME;
+		musb_writeb(mbase, MUSB_POWER, power);
+
+		DBG(3, "Root port resuming, power %02x\n", power);
+
+		/* later, GetPortStatus will stop RESUME signaling */
+		musb->port1_status |= MUSB_PORT_STAT_RESUME;
+		musb->rh_timer = jiffies + msecs_to_jiffies(20);
+	}
+}
+
+static void musb_port_reset(struct musb *musb, bool do_reset)
+{
+	u8		power;
+	void __iomem	*mbase = musb->mregs;
+
+#ifdef CONFIG_USB_MUSB_OTG
+	if (musb->xceiv.state == OTG_STATE_B_IDLE) {
+		DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n");
+		musb->port1_status &= ~USB_PORT_STAT_RESET;
+		return;
+	}
+#endif
+
+	if (!is_host_active(musb))
+		return;
+
+	/* NOTE:  caller guarantees it will turn off the reset when
+	 * the appropriate amount of time has passed
+	 */
+	power = musb_readb(mbase, MUSB_POWER);
+	if (do_reset) {
+
+		/*
+		 * If RESUME is set, we must make sure it stays minimum 20 ms.
+		 * Then we must clear RESUME and wait a bit to let musb start
+		 * generating SOFs. If we don't do this, OPT HS A 6.8 tests
+		 * fail with "Error! Did not receive an SOF before suspend
+		 * detected".
+		 */
+		if (power &  MUSB_POWER_RESUME) {
+			while (time_before(jiffies, musb->rh_timer))
+				msleep(1);
+			musb_writeb(mbase, MUSB_POWER,
+				power & ~MUSB_POWER_RESUME);
+			msleep(1);
+		}
+
+		musb->ignore_disconnect = true;
+		power &= 0xf0;
+		musb_writeb(mbase, MUSB_POWER,
+				power | MUSB_POWER_RESET);
+
+		musb->port1_status |= USB_PORT_STAT_RESET;
+		musb->port1_status &= ~USB_PORT_STAT_ENABLE;
+		musb->rh_timer = jiffies + msecs_to_jiffies(50);
+	} else {
+		DBG(4, "root port reset stopped\n");
+		musb_writeb(mbase, MUSB_POWER,
+				power & ~MUSB_POWER_RESET);
+
+		musb->ignore_disconnect = false;
+
+		power = musb_readb(mbase, MUSB_POWER);
+		if (power & MUSB_POWER_HSMODE) {
+			DBG(4, "high-speed device connected\n");
+			musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
+		}
+
+		musb->port1_status &= ~USB_PORT_STAT_RESET;
+		musb->port1_status |= USB_PORT_STAT_ENABLE
+					| (USB_PORT_STAT_C_RESET << 16)
+					| (USB_PORT_STAT_C_ENABLE << 16);
+		usb_hcd_poll_rh_status(musb_to_hcd(musb));
+
+		musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
+	}
+}
+
+void musb_root_disconnect(struct musb *musb)
+{
+	musb->port1_status = (1 << USB_PORT_FEAT_POWER)
+			| (1 << USB_PORT_FEAT_C_CONNECTION);
+
+	usb_hcd_poll_rh_status(musb_to_hcd(musb));
+	musb->is_active = 0;
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_HOST:
+	case OTG_STATE_A_SUSPEND:
+		musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+		musb->is_active = 0;
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		break;
+	default:
+		DBG(1, "host disconnect (%s)\n", otg_state_string(musb));
+	}
+}
+
+
+/*---------------------------------------------------------------------*/
+
+/* Caller may or may not hold musb->lock */
+int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	int		retval = 0;
+
+	/* called in_irq() via usb_hcd_poll_rh_status() */
+	if (musb->port1_status & 0xffff0000) {
+		*buf = 0x02;
+		retval = 1;
+	}
+	return retval;
+}
+
+int musb_hub_control(
+	struct usb_hcd	*hcd,
+	u16		typeReq,
+	u16		wValue,
+	u16		wIndex,
+	char		*buf,
+	u16		wLength)
+{
+	struct musb	*musb = hcd_to_musb(hcd);
+	u32		temp;
+	int		retval = 0;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+		spin_unlock_irqrestore(&musb->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	/* hub features:  always zero, setting is a NOP
+	 * port features: reported, sometimes updated when host is active
+	 * no indicators
+	 */
+	switch (typeReq) {
+	case ClearHubFeature:
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		if ((wIndex & 0xff) != 1)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			musb_port_suspend(musb, false);
+			break;
+		case USB_PORT_FEAT_POWER:
+			if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
+				musb_set_vbus(musb, 0);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+		case USB_PORT_FEAT_C_RESET:
+		case USB_PORT_FEAT_C_SUSPEND:
+			break;
+		default:
+			goto error;
+		}
+		DBG(5, "clear feature %d\n", wValue);
+		musb->port1_status &= ~(1 << wValue);
+		break;
+	case GetHubDescriptor:
+		{
+		struct usb_hub_descriptor *desc = (void *)buf;
+
+		desc->bDescLength = 9;
+		desc->bDescriptorType = 0x29;
+		desc->bNbrPorts = 1;
+		desc->wHubCharacteristics = __constant_cpu_to_le16(
+				  0x0001	/* per-port power switching */
+				| 0x0010	/* no overcurrent reporting */
+				);
+		desc->bPwrOn2PwrGood = 5;	/* msec/2 */
+		desc->bHubContrCurrent = 0;
+
+		/* workaround bogus struct definition */
+		desc->DeviceRemovable[0] = 0x02;	/* port 1 */
+		desc->DeviceRemovable[1] = 0xff;
+		}
+		break;
+	case GetHubStatus:
+		temp = 0;
+		*(__le32 *) buf = cpu_to_le32(temp);
+		break;
+	case GetPortStatus:
+		if (wIndex != 1)
+			goto error;
+
+		/* finish RESET signaling? */
+		if ((musb->port1_status & USB_PORT_STAT_RESET)
+				&& time_after_eq(jiffies, musb->rh_timer))
+			musb_port_reset(musb, false);
+
+		/* finish RESUME signaling? */
+		if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
+				&& time_after_eq(jiffies, musb->rh_timer)) {
+			u8		power;
+
+			power = musb_readb(musb->mregs, MUSB_POWER);
+			power &= ~MUSB_POWER_RESUME;
+			DBG(4, "root port resume stopped, power %02x\n",
+					power);
+			musb_writeb(musb->mregs, MUSB_POWER, power);
+
+			/* ISSUE:  DaVinci (RTL 1.300) disconnects after
+			 * resume of high speed peripherals (but not full
+			 * speed ones).
+			 */
+
+			musb->is_active = 1;
+			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
+					| MUSB_PORT_STAT_RESUME);
+			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+			usb_hcd_poll_rh_status(musb_to_hcd(musb));
+			/* NOTE: it might really be A_WAIT_BCON ... */
+			musb->xceiv.state = OTG_STATE_A_HOST;
+		}
+
+		put_unaligned(cpu_to_le32(musb->port1_status
+					& ~MUSB_PORT_STAT_RESUME),
+				(__le32 *) buf);
+
+		/* port change status is more interesting */
+		DBG(get_unaligned((u16 *)(buf+2)) ? 2 : 5, "port status %08x\n",
+				musb->port1_status);
+		break;
+	case SetPortFeature:
+		if ((wIndex & 0xff) != 1)
+			goto error;
+
+		switch (wValue) {
+		case USB_PORT_FEAT_POWER:
+			/* NOTE: this controller has a strange state machine
+			 * that involves "requesting sessions" according to
+			 * magic side effects from incompletely-described
+			 * rules about startup...
+			 *
+			 * This call is what really starts the host mode; be
+			 * very careful about side effects if you reorder any
+			 * initialization logic, e.g. for OTG, or change any
+			 * logic relating to VBUS power-up.
+			 */
+			if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
+				musb_start(musb);
+			break;
+		case USB_PORT_FEAT_RESET:
+			musb_port_reset(musb, true);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			musb_port_suspend(musb, true);
+			break;
+		case USB_PORT_FEAT_TEST:
+			if (unlikely(is_host_active(musb)))
+				goto error;
+
+			wIndex >>= 8;
+			switch (wIndex) {
+			case 1:
+				pr_debug("TEST_J\n");
+				temp = MUSB_TEST_J;
+				break;
+			case 2:
+				pr_debug("TEST_K\n");
+				temp = MUSB_TEST_K;
+				break;
+			case 3:
+				pr_debug("TEST_SE0_NAK\n");
+				temp = MUSB_TEST_SE0_NAK;
+				break;
+			case 4:
+				pr_debug("TEST_PACKET\n");
+				temp = MUSB_TEST_PACKET;
+				musb_load_testpacket(musb);
+				break;
+			case 5:
+				pr_debug("TEST_FORCE_ENABLE\n");
+				temp = MUSB_TEST_FORCE_HOST
+					| MUSB_TEST_FORCE_HS;
+
+				musb_writeb(musb->mregs, MUSB_DEVCTL,
+						MUSB_DEVCTL_SESSION);
+				break;
+			case 6:
+				pr_debug("TEST_FIFO_ACCESS\n");
+				temp = MUSB_TEST_FIFO_ACCESS;
+				break;
+			default:
+				goto error;
+			}
+			musb_writeb(musb->mregs, MUSB_TESTMODE, temp);
+			break;
+		default:
+			goto error;
+		}
+		DBG(5, "set feature %d\n", wValue);
+		musb->port1_status |= 1 << wValue;
+		break;
+
+	default:
+error:
+		/* "protocol stall" on error */
+		retval = -EPIPE;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return retval;
+}
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
new file mode 100644
index 00000000000..9ba8fb7fcd2
--- /dev/null
+++ b/drivers/usb/musb/musbhsdma.c
@@ -0,0 +1,433 @@
+/*
+ * MUSB OTG driver - support for Mentor's DMA controller
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2007 by Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include "musb_core.h"
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#include "omap2430.h"
+#endif
+
+#define MUSB_HSDMA_BASE		0x200
+#define MUSB_HSDMA_INTR		(MUSB_HSDMA_BASE + 0)
+#define MUSB_HSDMA_CONTROL		0x4
+#define MUSB_HSDMA_ADDRESS		0x8
+#define MUSB_HSDMA_COUNT		0xc
+
+#define MUSB_HSDMA_CHANNEL_OFFSET(_bChannel, _offset)		\
+		(MUSB_HSDMA_BASE + (_bChannel << 4) + _offset)
+
+/* control register (16-bit): */
+#define MUSB_HSDMA_ENABLE_SHIFT		0
+#define MUSB_HSDMA_TRANSMIT_SHIFT		1
+#define MUSB_HSDMA_MODE1_SHIFT		2
+#define MUSB_HSDMA_IRQENABLE_SHIFT		3
+#define MUSB_HSDMA_ENDPOINT_SHIFT		4
+#define MUSB_HSDMA_BUSERROR_SHIFT		8
+#define MUSB_HSDMA_BURSTMODE_SHIFT		9
+#define MUSB_HSDMA_BURSTMODE		(3 << MUSB_HSDMA_BURSTMODE_SHIFT)
+#define MUSB_HSDMA_BURSTMODE_UNSPEC	0
+#define MUSB_HSDMA_BURSTMODE_INCR4	1
+#define MUSB_HSDMA_BURSTMODE_INCR8	2
+#define MUSB_HSDMA_BURSTMODE_INCR16	3
+
+#define MUSB_HSDMA_CHANNELS		8
+
+struct musb_dma_controller;
+
+struct musb_dma_channel {
+	struct dma_channel		Channel;
+	struct musb_dma_controller	*controller;
+	u32				dwStartAddress;
+	u32				len;
+	u16				wMaxPacketSize;
+	u8				bIndex;
+	u8				epnum;
+	u8				transmit;
+};
+
+struct musb_dma_controller {
+	struct dma_controller		Controller;
+	struct musb_dma_channel		aChannel[MUSB_HSDMA_CHANNELS];
+	void				*pDmaPrivate;
+	void __iomem			*pCoreBase;
+	u8				bChannelCount;
+	u8				bmUsedChannels;
+	u8				irq;
+};
+
+static int dma_controller_start(struct dma_controller *c)
+{
+	/* nothing to do */
+	return 0;
+}
+
+static void dma_channel_release(struct dma_channel *pChannel);
+
+static int dma_controller_stop(struct dma_controller *c)
+{
+	struct musb_dma_controller *controller =
+		container_of(c, struct musb_dma_controller, Controller);
+	struct musb *musb = (struct musb *) controller->pDmaPrivate;
+	struct dma_channel *pChannel;
+	u8 bBit;
+
+	if (controller->bmUsedChannels != 0) {
+		dev_err(musb->controller,
+			"Stopping DMA controller while channel active\n");
+
+		for (bBit = 0; bBit < MUSB_HSDMA_CHANNELS; bBit++) {
+			if (controller->bmUsedChannels & (1 << bBit)) {
+				pChannel = &controller->aChannel[bBit].Channel;
+				dma_channel_release(pChannel);
+
+				if (!controller->bmUsedChannels)
+					break;
+			}
+		}
+	}
+	return 0;
+}
+
+static struct dma_channel *dma_channel_allocate(struct dma_controller *c,
+				struct musb_hw_ep *hw_ep, u8 transmit)
+{
+	u8 bBit;
+	struct dma_channel *pChannel = NULL;
+	struct musb_dma_channel *pImplChannel = NULL;
+	struct musb_dma_controller *controller =
+			container_of(c, struct musb_dma_controller, Controller);
+
+	for (bBit = 0; bBit < MUSB_HSDMA_CHANNELS; bBit++) {
+		if (!(controller->bmUsedChannels & (1 << bBit))) {
+			controller->bmUsedChannels |= (1 << bBit);
+			pImplChannel = &(controller->aChannel[bBit]);
+			pImplChannel->controller = controller;
+			pImplChannel->bIndex = bBit;
+			pImplChannel->epnum = hw_ep->epnum;
+			pImplChannel->transmit = transmit;
+			pChannel = &(pImplChannel->Channel);
+			pChannel->private_data = pImplChannel;
+			pChannel->status = MUSB_DMA_STATUS_FREE;
+			pChannel->max_len = 0x10000;
+			/* Tx => mode 1; Rx => mode 0 */
+			pChannel->desired_mode = transmit;
+			pChannel->actual_len = 0;
+			break;
+		}
+	}
+	return pChannel;
+}
+
+static void dma_channel_release(struct dma_channel *pChannel)
+{
+	struct musb_dma_channel *pImplChannel =
+		(struct musb_dma_channel *) pChannel->private_data;
+
+	pChannel->actual_len = 0;
+	pImplChannel->dwStartAddress = 0;
+	pImplChannel->len = 0;
+
+	pImplChannel->controller->bmUsedChannels &=
+		~(1 << pImplChannel->bIndex);
+
+	pChannel->status = MUSB_DMA_STATUS_UNKNOWN;
+}
+
+static void configure_channel(struct dma_channel *pChannel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	struct musb_dma_channel *pImplChannel =
+		(struct musb_dma_channel *) pChannel->private_data;
+	struct musb_dma_controller *controller = pImplChannel->controller;
+	void __iomem *mbase = controller->pCoreBase;
+	u8 bChannel = pImplChannel->bIndex;
+	u16 csr = 0;
+
+	DBG(4, "%p, pkt_sz %d, addr 0x%x, len %d, mode %d\n",
+			pChannel, packet_sz, dma_addr, len, mode);
+
+	if (mode) {
+		csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
+		BUG_ON(len < packet_sz);
+
+		if (packet_sz >= 64) {
+			csr |= MUSB_HSDMA_BURSTMODE_INCR16
+					<< MUSB_HSDMA_BURSTMODE_SHIFT;
+		} else if (packet_sz >= 32) {
+			csr |= MUSB_HSDMA_BURSTMODE_INCR8
+					<< MUSB_HSDMA_BURSTMODE_SHIFT;
+		} else if (packet_sz >= 16) {
+			csr |= MUSB_HSDMA_BURSTMODE_INCR4
+					<< MUSB_HSDMA_BURSTMODE_SHIFT;
+		}
+	}
+
+	csr |= (pImplChannel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
+		| (1 << MUSB_HSDMA_ENABLE_SHIFT)
+		| (1 << MUSB_HSDMA_IRQENABLE_SHIFT)
+		| (pImplChannel->transmit
+				? (1 << MUSB_HSDMA_TRANSMIT_SHIFT)
+				: 0);
+
+	/* address/count */
+	musb_writel(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_ADDRESS),
+		dma_addr);
+	musb_writel(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_COUNT),
+		len);
+
+	/* control (this should start things) */
+	musb_writew(mbase,
+		MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_CONTROL),
+		csr);
+}
+
+static int dma_channel_program(struct dma_channel *pChannel,
+				u16 packet_sz, u8 mode,
+				dma_addr_t dma_addr, u32 len)
+{
+	struct musb_dma_channel *pImplChannel =
+			(struct musb_dma_channel *) pChannel->private_data;
+
+	DBG(2, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n",
+		pImplChannel->epnum,
+		pImplChannel->transmit ? "Tx" : "Rx",
+		packet_sz, dma_addr, len, mode);
+
+	BUG_ON(pChannel->status == MUSB_DMA_STATUS_UNKNOWN ||
+		pChannel->status == MUSB_DMA_STATUS_BUSY);
+
+	pChannel->actual_len = 0;
+	pImplChannel->dwStartAddress = dma_addr;
+	pImplChannel->len = len;
+	pImplChannel->wMaxPacketSize = packet_sz;
+	pChannel->status = MUSB_DMA_STATUS_BUSY;
+
+	if ((mode == 1) && (len >= packet_sz))
+		configure_channel(pChannel, packet_sz, 1, dma_addr, len);
+	else
+		configure_channel(pChannel, packet_sz, 0, dma_addr, len);
+
+	return true;
+}
+
+static int dma_channel_abort(struct dma_channel *pChannel)
+{
+	struct musb_dma_channel *pImplChannel =
+		(struct musb_dma_channel *) pChannel->private_data;
+	u8 bChannel = pImplChannel->bIndex;
+	void __iomem *mbase = pImplChannel->controller->pCoreBase;
+	u16 csr;
+
+	if (pChannel->status == MUSB_DMA_STATUS_BUSY) {
+		if (pImplChannel->transmit) {
+
+			csr = musb_readw(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_TXCSR));
+			csr &= ~(MUSB_TXCSR_AUTOSET |
+				 MUSB_TXCSR_DMAENAB |
+				 MUSB_TXCSR_DMAMODE);
+			musb_writew(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_TXCSR),
+				csr);
+		} else {
+			csr = musb_readw(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_RXCSR));
+			csr &= ~(MUSB_RXCSR_AUTOCLEAR |
+				 MUSB_RXCSR_DMAENAB |
+				 MUSB_RXCSR_DMAMODE);
+			musb_writew(mbase,
+				MUSB_EP_OFFSET(pImplChannel->epnum,
+						MUSB_RXCSR),
+				csr);
+		}
+
+		musb_writew(mbase,
+			MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_CONTROL),
+			0);
+		musb_writel(mbase,
+			MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_ADDRESS),
+			0);
+		musb_writel(mbase,
+			MUSB_HSDMA_CHANNEL_OFFSET(bChannel, MUSB_HSDMA_COUNT),
+			0);
+
+		pChannel->status = MUSB_DMA_STATUS_FREE;
+	}
+	return 0;
+}
+
+static irqreturn_t dma_controller_irq(int irq, void *private_data)
+{
+	struct musb_dma_controller *controller =
+		(struct musb_dma_controller *)private_data;
+	struct musb_dma_channel *pImplChannel;
+	struct musb *musb = controller->pDmaPrivate;
+	void __iomem *mbase = controller->pCoreBase;
+	struct dma_channel *pChannel;
+	u8 bChannel;
+	u16 csr;
+	u32 dwAddress;
+	u8 int_hsdma;
+	irqreturn_t retval = IRQ_NONE;
+	unsigned long flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
+	if (!int_hsdma)
+		goto done;
+
+	for (bChannel = 0; bChannel < MUSB_HSDMA_CHANNELS; bChannel++) {
+		if (int_hsdma & (1 << bChannel)) {
+			pImplChannel = (struct musb_dma_channel *)
+					&(controller->aChannel[bChannel]);
+			pChannel = &pImplChannel->Channel;
+
+			csr = musb_readw(mbase,
+					MUSB_HSDMA_CHANNEL_OFFSET(bChannel,
+							MUSB_HSDMA_CONTROL));
+
+			if (csr & (1 << MUSB_HSDMA_BUSERROR_SHIFT))
+				pImplChannel->Channel.status =
+					MUSB_DMA_STATUS_BUS_ABORT;
+			else {
+				u8 devctl;
+
+				dwAddress = musb_readl(mbase,
+						MUSB_HSDMA_CHANNEL_OFFSET(
+							bChannel,
+							MUSB_HSDMA_ADDRESS));
+				pChannel->actual_len = dwAddress
+					- pImplChannel->dwStartAddress;
+
+				DBG(2, "ch %p, 0x%x -> 0x%x (%d / %d) %s\n",
+					pChannel, pImplChannel->dwStartAddress,
+					dwAddress, pChannel->actual_len,
+					pImplChannel->len,
+					(pChannel->actual_len
+						< pImplChannel->len) ?
+					"=> reconfig 0" : "=> complete");
+
+				devctl = musb_readb(mbase, MUSB_DEVCTL);
+
+				pChannel->status = MUSB_DMA_STATUS_FREE;
+
+				/* completed */
+				if ((devctl & MUSB_DEVCTL_HM)
+					&& (pImplChannel->transmit)
+					&& ((pChannel->desired_mode == 0)
+					    || (pChannel->actual_len &
+					    (pImplChannel->wMaxPacketSize - 1)))
+					 ) {
+					/* Send out the packet */
+					musb_ep_select(mbase,
+						pImplChannel->epnum);
+					musb_writew(mbase, MUSB_EP_OFFSET(
+							pImplChannel->epnum,
+							MUSB_TXCSR),
+						MUSB_TXCSR_TXPKTRDY);
+				} else
+					musb_dma_completion(
+						musb,
+						pImplChannel->epnum,
+						pImplChannel->transmit);
+			}
+		}
+	}
+	retval = IRQ_HANDLED;
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+	return retval;
+}
+
+void dma_controller_destroy(struct dma_controller *c)
+{
+	struct musb_dma_controller *controller;
+
+	controller = container_of(c, struct musb_dma_controller, Controller);
+	if (!controller)
+		return;
+
+	if (controller->irq)
+		free_irq(controller->irq, c);
+
+	kfree(controller);
+}
+
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *pCoreBase)
+{
+	struct musb_dma_controller *controller;
+	struct device *dev = musb->controller;
+	struct platform_device *pdev = to_platform_device(dev);
+	int irq = platform_get_irq(pdev, 1);
+
+	if (irq == 0) {
+		dev_err(dev, "No DMA interrupt line!\n");
+		return NULL;
+	}
+
+	controller = kzalloc(sizeof(struct musb_dma_controller), GFP_KERNEL);
+	if (!controller)
+		return NULL;
+
+	controller->bChannelCount = MUSB_HSDMA_CHANNELS;
+	controller->pDmaPrivate = musb;
+	controller->pCoreBase = pCoreBase;
+
+	controller->Controller.start = dma_controller_start;
+	controller->Controller.stop = dma_controller_stop;
+	controller->Controller.channel_alloc = dma_channel_allocate;
+	controller->Controller.channel_release = dma_channel_release;
+	controller->Controller.channel_program = dma_channel_program;
+	controller->Controller.channel_abort = dma_channel_abort;
+
+	if (request_irq(irq, dma_controller_irq, IRQF_DISABLED,
+			musb->controller->bus_id, &controller->Controller)) {
+		dev_err(dev, "request_irq %d failed!\n", irq);
+		dma_controller_destroy(&controller->Controller);
+		return NULL;
+	}
+
+	controller->irq = irq;
+
+	return &controller->Controller;
+}
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
new file mode 100644
index 00000000000..298b22e6ad0
--- /dev/null
+++ b/drivers/usb/musb/omap2430.c
@@ -0,0 +1,324 @@
+/*
+ * Copyright (C) 2005-2007 by Texas Instruments
+ * Some code has been taken from tusb6010.c
+ * Copyrights for that are attributable to:
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+
+#include "musb_core.h"
+#include "omap2430.h"
+
+#ifdef CONFIG_ARCH_OMAP3430
+#define	get_cpu_rev()	2
+#endif
+
+#define MUSB_TIMEOUT_A_WAIT_BCON	1100
+
+static struct timer_list musb_idle_timer;
+
+static void musb_do_idle(unsigned long _musb)
+{
+	struct musb	*musb = (void *)_musb;
+	unsigned long	flags;
+	u8	power;
+	u8	devctl;
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_WAIT_BCON:
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl & MUSB_DEVCTL_BDEVICE) {
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		} else {
+			musb->xceiv.state = OTG_STATE_A_IDLE;
+			MUSB_HST_MODE(musb);
+		}
+		break;
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	case OTG_STATE_A_SUSPEND:
+		/* finish RESUME signaling? */
+		if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
+			power = musb_readb(musb->mregs, MUSB_POWER);
+			power &= ~MUSB_POWER_RESUME;
+			DBG(1, "root port resume stopped, power %02x\n", power);
+			musb_writeb(musb->mregs, MUSB_POWER, power);
+			musb->is_active = 1;
+			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
+						| MUSB_PORT_STAT_RESUME);
+			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+			usb_hcd_poll_rh_status(musb_to_hcd(musb));
+			/* NOTE: it might really be A_WAIT_BCON ... */
+			musb->xceiv.state = OTG_STATE_A_HOST;
+		}
+		break;
+#endif
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	case OTG_STATE_A_HOST:
+		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+		if (devctl &  MUSB_DEVCTL_BDEVICE)
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+		else
+			musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+#endif
+	default:
+		break;
+	}
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+
+void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+{
+	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
+	static unsigned long	last_timer;
+
+	if (timeout == 0)
+		timeout = default_timeout;
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || ((musb->a_wait_bcon == 0)
+			&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
+		del_timer(&musb_idle_timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout)) {
+		if (!timer_pending(&musb_idle_timer))
+			last_timer = timeout;
+		else {
+			DBG(4, "Longer idle timer already pending, ignoring\n");
+			return;
+		}
+	}
+	last_timer = timeout;
+
+	DBG(4, "%s inactive, for idle timer for %lu ms\n",
+		otg_state_string(musb),
+		(unsigned long)jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&musb_idle_timer, timeout);
+}
+
+void musb_platform_enable(struct musb *musb)
+{
+}
+void musb_platform_disable(struct musb *musb)
+{
+}
+static void omap_vbus_power(struct musb *musb, int is_on, int sleeping)
+{
+}
+
+static void omap_set_vbus(struct musb *musb, int is_on)
+{
+	u8		devctl;
+	/* HDRC controls CPEN, but beware current surges during device
+	 * connect.  They can trigger transient overcurrent conditions
+	 * that must be ignored.
+	 */
+
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	if (is_on) {
+		musb->is_active = 1;
+		musb->xceiv.default_a = 1;
+		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		devctl |= MUSB_DEVCTL_SESSION;
+
+		MUSB_HST_MODE(musb);
+	} else {
+		musb->is_active = 0;
+
+		/* NOTE:  we're skipping A_WAIT_VFALL -> A_IDLE and
+		 * jumping right to B_IDLE...
+		 */
+
+		musb->xceiv.default_a = 0;
+		musb->xceiv.state = OTG_STATE_B_IDLE;
+		devctl &= ~MUSB_DEVCTL_SESSION;
+
+		MUSB_DEV_MODE(musb);
+	}
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	DBG(1, "VBUS %s, devctl %02x "
+		/* otg %3x conf %08x prcm %08x */ "\n",
+		otg_state_string(musb),
+		musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+static int omap_set_power(struct otg_transceiver *x, unsigned mA)
+{
+	return 0;
+}
+
+static int musb_platform_resume(struct musb *musb);
+
+void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+{
+	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	devctl |= MUSB_DEVCTL_SESSION;
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	switch (musb_mode) {
+	case MUSB_HOST:
+		otg_set_host(&musb->xceiv, musb->xceiv.host);
+		break;
+	case MUSB_PERIPHERAL:
+		otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget);
+		break;
+	case MUSB_OTG:
+		break;
+	}
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+	u32 l;
+
+#if defined(CONFIG_ARCH_OMAP2430)
+	omap_cfg_reg(AE5_2430_USB0HS_STP);
+#endif
+
+	musb_platform_resume(musb);
+
+	l = omap_readl(OTG_SYSCONFIG);
+	l &= ~ENABLEWAKEUP;	/* disable wakeup */
+	l &= ~NOSTDBY;		/* remove possible nostdby */
+	l |= SMARTSTDBY;	/* enable smart standby */
+	l &= ~AUTOIDLE;		/* disable auto idle */
+	l &= ~NOIDLE;		/* remove possible noidle */
+	l |= SMARTIDLE;		/* enable smart idle */
+	l |= AUTOIDLE;		/* enable auto idle */
+	omap_writel(l, OTG_SYSCONFIG);
+
+	l = omap_readl(OTG_INTERFSEL);
+	l |= ULPI_12PIN;
+	omap_writel(l, OTG_INTERFSEL);
+
+	pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
+			"sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
+			omap_readl(OTG_REVISION), omap_readl(OTG_SYSCONFIG),
+			omap_readl(OTG_SYSSTATUS), omap_readl(OTG_INTERFSEL),
+			omap_readl(OTG_SIMENABLE));
+
+	omap_vbus_power(musb, musb->board_mode == MUSB_HOST, 1);
+
+	if (is_host_enabled(musb))
+		musb->board_set_vbus = omap_set_vbus;
+	if (is_peripheral_enabled(musb))
+		musb->xceiv.set_power = omap_set_power;
+	musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON;
+
+	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+
+	return 0;
+}
+
+int musb_platform_suspend(struct musb *musb)
+{
+	u32 l;
+
+	if (!musb->clock)
+		return 0;
+
+	/* in any role */
+	l = omap_readl(OTG_FORCESTDBY);
+	l |= ENABLEFORCE;	/* enable MSTANDBY */
+	omap_writel(l, OTG_FORCESTDBY);
+
+	l = omap_readl(OTG_SYSCONFIG);
+	l |= ENABLEWAKEUP;	/* enable wakeup */
+	omap_writel(l, OTG_SYSCONFIG);
+
+	if (musb->xceiv.set_suspend)
+		musb->xceiv.set_suspend(&musb->xceiv, 1);
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 0);
+	else
+		clk_disable(musb->clock);
+
+	return 0;
+}
+
+static int musb_platform_resume(struct musb *musb)
+{
+	u32 l;
+
+	if (!musb->clock)
+		return 0;
+
+	if (musb->xceiv.set_suspend)
+		musb->xceiv.set_suspend(&musb->xceiv, 0);
+
+	if (musb->set_clock)
+		musb->set_clock(musb->clock, 1);
+	else
+		clk_enable(musb->clock);
+
+	l = omap_readl(OTG_SYSCONFIG);
+	l &= ~ENABLEWAKEUP;	/* disable wakeup */
+	omap_writel(l, OTG_SYSCONFIG);
+
+	l = omap_readl(OTG_FORCESTDBY);
+	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
+	omap_writel(l, OTG_FORCESTDBY);
+
+	return 0;
+}
+
+
+int musb_platform_exit(struct musb *musb)
+{
+
+	omap_vbus_power(musb, 0 /*off*/, 1);
+
+	musb_platform_suspend(musb);
+
+	clk_put(musb->clock);
+	musb->clock = 0;
+
+	return 0;
+}
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
new file mode 100644
index 00000000000..786a62071f7
--- /dev/null
+++ b/drivers/usb/musb/omap2430.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2005-2006 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_OMAP243X_H__
+#define __MUSB_OMAP243X_H__
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#include <asm/arch/hardware.h>
+#include <asm/arch/usb.h>
+
+/*
+ * OMAP2430-specific definitions
+ */
+
+#define MENTOR_BASE_OFFSET	0
+#if	defined(CONFIG_ARCH_OMAP2430)
+#define	OMAP_HSOTG_BASE		(OMAP243X_HS_BASE)
+#elif	defined(CONFIG_ARCH_OMAP3430)
+#define	OMAP_HSOTG_BASE		(OMAP34XX_HSUSB_OTG_BASE)
+#endif
+#define OMAP_HSOTG(offset)	(OMAP_HSOTG_BASE + 0x400 + (offset))
+#define OTG_REVISION		OMAP_HSOTG(0x0)
+#define OTG_SYSCONFIG		OMAP_HSOTG(0x4)
+#	define	MIDLEMODE	12	/* bit position */
+#	define	FORCESTDBY		(0 << MIDLEMODE)
+#	define	NOSTDBY			(1 << MIDLEMODE)
+#	define	SMARTSTDBY		(2 << MIDLEMODE)
+#	define	SIDLEMODE		3	/* bit position */
+#	define	FORCEIDLE		(0 << SIDLEMODE)
+#	define	NOIDLE			(1 << SIDLEMODE)
+#	define	SMARTIDLE		(2 << SIDLEMODE)
+#	define	ENABLEWAKEUP		(1 << 2)
+#	define	SOFTRST			(1 << 1)
+#	define	AUTOIDLE		(1 << 0)
+#define OTG_SYSSTATUS		OMAP_HSOTG(0x8)
+#	define	RESETDONE		(1 << 0)
+#define OTG_INTERFSEL		OMAP_HSOTG(0xc)
+#	define	EXTCP			(1 << 2)
+#	define	PHYSEL		0	/* bit position */
+#	define	UTMI_8BIT		(0 << PHYSEL)
+#	define	ULPI_12PIN		(1 << PHYSEL)
+#	define	ULPI_8PIN		(2 << PHYSEL)
+#define OTG_SIMENABLE		OMAP_HSOTG(0x10)
+#	define	TM1			(1 << 0)
+#define OTG_FORCESTDBY		OMAP_HSOTG(0x14)
+#	define	ENABLEFORCE		(1 << 0)
+
+#endif	/* CONFIG_ARCH_OMAP2430 */
+
+#endif	/* __MUSB_OMAP243X_H__ */
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
new file mode 100644
index 00000000000..b73b036f3d7
--- /dev/null
+++ b/drivers/usb/musb/tusb6010.c
@@ -0,0 +1,1151 @@
+/*
+ * TUSB6010 USB 2.0 OTG Dual Role controller
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Notes:
+ * - Driver assumes that interface to external host (main CPU) is
+ *   configured for NOR FLASH interface instead of VLYNQ serial
+ *   interface.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include "musb_core.h"
+
+static void tusb_source_power(struct musb *musb, int is_on);
+
+#define TUSB_REV_MAJOR(reg_val)		((reg_val >> 4) & 0xf)
+#define TUSB_REV_MINOR(reg_val)		(reg_val & 0xf)
+
+/*
+ * Checks the revision. We need to use the DMA register as 3.0 does not
+ * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
+ */
+u8 tusb_get_revision(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		die_id;
+	u8		rev;
+
+	rev = musb_readl(tbase, TUSB_DMA_CTRL_REV) & 0xff;
+	if (TUSB_REV_MAJOR(rev) == 3) {
+		die_id = TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase,
+				TUSB_DIDR1_HI));
+		if (die_id >= TUSB_DIDR1_HI_REV_31)
+			rev |= 1;
+	}
+
+	return rev;
+}
+
+static int __init tusb_print_revision(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u8		rev;
+
+	rev = tusb_get_revision(musb);
+
+	pr_info("tusb: %s%i.%i %s%i.%i %s%i.%i %s%i.%i %s%i %s%i.%i\n",
+		"prcm",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_PRCM_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_PRCM_REV)),
+		"int",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+		"gpio",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_GPIO_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_GPIO_REV)),
+		"dma",
+		TUSB_REV_MAJOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+		TUSB_REV_MINOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+		"dieid",
+		TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase, TUSB_DIDR1_HI)),
+		"rev",
+		TUSB_REV_MAJOR(rev), TUSB_REV_MINOR(rev));
+
+	return tusb_get_revision(musb);
+}
+
+#define WBUS_QUIRK_MASK	(TUSB_PHY_OTG_CTRL_TESTM2 | TUSB_PHY_OTG_CTRL_TESTM1 \
+				| TUSB_PHY_OTG_CTRL_TESTM0)
+
+/*
+ * Workaround for spontaneous WBUS wake-up issue #2 for tusb3.0.
+ * Disables power detection in PHY for the duration of idle.
+ */
+static void tusb_wbus_quirk(struct musb *musb, int enabled)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	static u32	phy_otg_ctrl, phy_otg_ena;
+	u32		tmp;
+
+	if (enabled) {
+		phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+		phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT
+				| phy_otg_ena | WBUS_QUIRK_MASK;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+		tmp = phy_otg_ena & ~WBUS_QUIRK_MASK;
+		tmp |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_TESTM2;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+		DBG(2, "Enabled tusb wbus quirk ctrl %08x ena %08x\n",
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+	} else if (musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE)
+					& TUSB_PHY_OTG_CTRL_TESTM2) {
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+		tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena;
+		musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+		DBG(2, "Disabled tusb wbus quirk ctrl %08x ena %08x\n",
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+			musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+		phy_otg_ctrl = 0;
+		phy_otg_ena = 0;
+	}
+}
+
+/*
+ * TUSB 6010 may use a parallel bus that doesn't support byte ops;
+ * so both loading and unloading FIFOs need explicit byte counts.
+ */
+
+static inline void
+tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len)
+{
+	u32		val;
+	int		i;
+
+	if (len > 4) {
+		for (i = 0; i < (len >> 2); i++) {
+			memcpy(&val, buf, 4);
+			musb_writel(fifo, 0, val);
+			buf += 4;
+		}
+		len %= 4;
+	}
+	if (len > 0) {
+		/* Write the rest 1 - 3 bytes to FIFO */
+		memcpy(&val, buf, len);
+		musb_writel(fifo, 0, val);
+	}
+}
+
+static inline void tusb_fifo_read_unaligned(void __iomem *fifo,
+						void __iomem *buf, u16 len)
+{
+	u32		val;
+	int		i;
+
+	if (len > 4) {
+		for (i = 0; i < (len >> 2); i++) {
+			val = musb_readl(fifo, 0);
+			memcpy(buf, &val, 4);
+			buf += 4;
+		}
+		len %= 4;
+	}
+	if (len > 0) {
+		/* Read the rest 1 - 3 bytes from FIFO */
+		val = musb_readl(fifo, 0);
+		memcpy(buf, &val, len);
+	}
+}
+
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
+{
+	void __iomem	*ep_conf = hw_ep->conf;
+	void __iomem	*fifo = hw_ep->fifo;
+	u8		epnum = hw_ep->epnum;
+
+	prefetch(buf);
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'T', epnum, fifo, len, buf);
+
+	if (epnum)
+		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(len));
+	else
+		musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_DIR_TX |
+			TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+	if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+		/* Best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) buf) == 0) {
+			if (len >= 4) {
+				writesl(fifo, buf, len >> 2);
+				buf += (len & ~0x03);
+				len &= 0x03;
+			}
+		} else {
+			if (len >= 2) {
+				u32 val;
+				int i;
+
+				/* Cannot use writesw, fifo is 32-bit */
+				for (i = 0; i < (len >> 2); i++) {
+					val = (u32)(*(u16 *)buf);
+					buf += 2;
+					val |= (*(u16 *)buf) << 16;
+					buf += 2;
+					musb_writel(fifo, 0, val);
+				}
+				len &= 0x03;
+			}
+		}
+	}
+
+	if (len > 0)
+		tusb_fifo_write_unaligned(fifo, buf, len);
+}
+
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
+{
+	void __iomem	*ep_conf = hw_ep->conf;
+	void __iomem	*fifo = hw_ep->fifo;
+	u8		epnum = hw_ep->epnum;
+
+	DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+			'R', epnum, fifo, len, buf);
+
+	if (epnum)
+		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(len));
+	else
+		musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+	if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+		/* Best case is 32bit-aligned destination address */
+		if ((0x02 & (unsigned long) buf) == 0) {
+			if (len >= 4) {
+				readsl(fifo, buf, len >> 2);
+				buf += (len & ~0x03);
+				len &= 0x03;
+			}
+		} else {
+			if (len >= 2) {
+				u32 val;
+				int i;
+
+				/* Cannot use readsw, fifo is 32-bit */
+				for (i = 0; i < (len >> 2); i++) {
+					val = musb_readl(fifo, 0);
+					*(u16 *)buf = (u16)(val & 0xffff);
+					buf += 2;
+					*(u16 *)buf = (u16)(val >> 16);
+					buf += 2;
+				}
+				len &= 0x03;
+			}
+		}
+	}
+
+	if (len > 0)
+		tusb_fifo_read_unaligned(fifo, buf, len);
+}
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+
+/* This is used by gadget drivers, and OTG transceiver logic, allowing
+ * at most mA current to be drawn from VBUS during a Default-B session
+ * (that is, while VBUS exceeds 4.4V).  In Default-A (including pure host
+ * mode), or low power Default-B sessions, something else supplies power.
+ * Caller must take care of locking.
+ */
+static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
+{
+	struct musb	*musb = container_of(x, struct musb, xceiv);
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	/*
+	 * Keep clock active when enabled. Note that this is not tied to
+	 * drawing VBUS, as with OTG mA can be less than musb->min_power.
+	 */
+	if (musb->set_clock) {
+		if (mA)
+			musb->set_clock(musb->clock, 1);
+		else
+			musb->set_clock(musb->clock, 0);
+	}
+
+	/* tps65030 seems to consume max 100mA, with maybe 60mA available
+	 * (measured on one board) for things other than tps and tusb.
+	 *
+	 * Boards sharing the CPU clock with CLKIN will need to prevent
+	 * certain idle sleep states while the USB link is active.
+	 *
+	 * REVISIT we could use VBUS to supply only _one_ of { 1.5V, 3.3V }.
+	 * The actual current usage would be very board-specific.  For now,
+	 * it's simpler to just use an aggregate (also board-specific).
+	 */
+	if (x->default_a || mA < (musb->min_power << 1))
+		mA = 0;
+
+	reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	if (mA) {
+		musb->is_bus_powered = 1;
+		reg |= TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN;
+	} else {
+		musb->is_bus_powered = 0;
+		reg &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+	}
+	musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+	DBG(2, "draw max %d mA VBUS\n", mA);
+	return 0;
+}
+
+#else
+#define tusb_draw_power	NULL
+#endif
+
+/* workaround for issue 13:  change clock during chip idle
+ * (to be fixed in rev3 silicon) ... symptoms include disconnect
+ * or looping suspend/resume cycles
+ */
+static void tusb_set_clock_source(struct musb *musb, unsigned mode)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	reg = musb_readl(tbase, TUSB_PRCM_CONF);
+	reg &= ~TUSB_PRCM_CONF_SYS_CLKSEL(0x3);
+
+	/* 0 = refclk (clkin, XI)
+	 * 1 = PHY 60 MHz (internal PLL)
+	 * 2 = not supported
+	 * 3 = what?
+	 */
+	if (mode > 0)
+		reg |= TUSB_PRCM_CONF_SYS_CLKSEL(mode & 0x3);
+
+	musb_writel(tbase, TUSB_PRCM_CONF, reg);
+
+	/* FIXME tusb6010_platform_retime(mode == 0); */
+}
+
+/*
+ * Idle TUSB6010 until next wake-up event; NOR access always wakes.
+ * Other code ensures that we idle unless we're connected _and_ the
+ * USB link is not suspended ... and tells us the relevant wakeup
+ * events.  SW_EN for voltage is handled separately.
+ */
+void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		reg;
+
+	if ((wakeup_enables & TUSB_PRCM_WBUS)
+			&& (tusb_get_revision(musb) == TUSB_REV_30))
+		tusb_wbus_quirk(musb, 1);
+
+	tusb_set_clock_source(musb, 0);
+
+	wakeup_enables |= TUSB_PRCM_WNORCS;
+	musb_writel(tbase, TUSB_PRCM_WAKEUP_MASK, ~wakeup_enables);
+
+	/* REVISIT writeup of WID implies that if WID set and ID is grounded,
+	 * TUSB_PHY_OTG_CTRL.TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP must be cleared.
+	 * Presumably that's mostly to save power, hence WID is immaterial ...
+	 */
+
+	reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	/* issue 4: when driving vbus, use hipower (vbus_det) comparator */
+	if (is_host_active(musb)) {
+		reg |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+		reg &= ~TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+	} else {
+		reg |= TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+		reg &= ~TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+	}
+	reg |= TUSB_PRCM_MNGMT_PM_IDLE | TUSB_PRCM_MNGMT_DEV_IDLE;
+	musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+	DBG(6, "idle, wake on %02x\n", wakeup_enables);
+}
+
+/*
+ * Updates cable VBUS status. Caller must take care of locking.
+ */
+int musb_platform_get_vbus_status(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		otg_stat, prcm_mngmt;
+	int		ret = 0;
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	prcm_mngmt = musb_readl(tbase, TUSB_PRCM_MNGMT);
+
+	/* Temporarily enable VBUS detection if it was disabled for
+	 * suspend mode. Unless it's enabled otg_stat and devctl will
+	 * not show correct VBUS state.
+	 */
+	if (!(prcm_mngmt & TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN)) {
+		u32 tmp = prcm_mngmt;
+		tmp |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+		musb_writel(tbase, TUSB_PRCM_MNGMT, tmp);
+		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+		musb_writel(tbase, TUSB_PRCM_MNGMT, prcm_mngmt);
+	}
+
+	if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID)
+		ret = 1;
+
+	return ret;
+}
+
+static struct timer_list musb_idle_timer;
+
+static void musb_do_idle(unsigned long _musb)
+{
+	struct musb	*musb = (void *)_musb;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	switch (musb->xceiv.state) {
+	case OTG_STATE_A_WAIT_BCON:
+		if ((musb->a_wait_bcon != 0)
+			&& (musb->idle_timeout == 0
+				|| time_after(jiffies, musb->idle_timeout))) {
+			DBG(4, "Nothing connected %s, turning off VBUS\n",
+					otg_state_string(musb));
+		}
+		/* FALLTHROUGH */
+	case OTG_STATE_A_IDLE:
+		tusb_source_power(musb, 0);
+	default:
+		break;
+	}
+
+	if (!musb->is_active) {
+		u32	wakeups;
+
+		/* wait until khubd handles port change status */
+		if (is_host_active(musb) && (musb->port1_status >> 16))
+			goto done;
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+		if (is_peripheral_enabled(musb) && !musb->gadget_driver)
+			wakeups = 0;
+		else {
+			wakeups = TUSB_PRCM_WHOSTDISCON
+					| TUSB_PRCM_WBUS
+					| TUSB_PRCM_WVBUS;
+			if (is_otg_enabled(musb))
+				wakeups |= TUSB_PRCM_WID;
+		}
+#else
+		wakeups = TUSB_PRCM_WHOSTDISCON | TUSB_PRCM_WBUS;
+#endif
+		tusb_allow_idle(musb, wakeups);
+	}
+done:
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+/*
+ * Maybe put TUSB6010 into idle mode mode depending on USB link status,
+ * like "disconnected" or "suspended".  We'll be woken out of it by
+ * connect, resume, or disconnect.
+ *
+ * Needs to be called as the last function everywhere where there is
+ * register access to TUSB6010 because of NOR flash wake-up.
+ * Caller should own controller spinlock.
+ *
+ * Delay because peripheral enables D+ pullup 3msec after SE0, and
+ * we don't want to treat that full speed J as a wakeup event.
+ * ... peripherals must draw only suspend current after 10 msec.
+ */
+void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+{
+	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
+	static unsigned long	last_timer;
+
+	if (timeout == 0)
+		timeout = default_timeout;
+
+	/* Never idle if active, or when VBUS timeout is not set as host */
+	if (musb->is_active || ((musb->a_wait_bcon == 0)
+			&& (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) {
+		DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
+		del_timer(&musb_idle_timer);
+		last_timer = jiffies;
+		return;
+	}
+
+	if (time_after(last_timer, timeout)) {
+		if (!timer_pending(&musb_idle_timer))
+			last_timer = timeout;
+		else {
+			DBG(4, "Longer idle timer already pending, ignoring\n");
+			return;
+		}
+	}
+	last_timer = timeout;
+
+	DBG(4, "%s inactive, for idle timer for %lu ms\n",
+		otg_state_string(musb),
+		(unsigned long)jiffies_to_msecs(timeout - jiffies));
+	mod_timer(&musb_idle_timer, timeout);
+}
+
+/* ticks of 60 MHz clock */
+#define DEVCLOCK		60000000
+#define OTG_TIMER_MS(msecs)	((msecs) \
+		? (TUSB_DEV_OTG_TIMER_VAL((DEVCLOCK/1000)*(msecs)) \
+				| TUSB_DEV_OTG_TIMER_ENABLE) \
+		: 0)
+
+static void tusb_source_power(struct musb *musb, int is_on)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		conf, prcm, timer;
+	u8		devctl;
+
+	/* HDRC controls CPEN, but beware current surges during device
+	 * connect.  They can trigger transient overcurrent conditions
+	 * that must be ignored.
+	 */
+
+	prcm = musb_readl(tbase, TUSB_PRCM_MNGMT);
+	conf = musb_readl(tbase, TUSB_DEV_CONF);
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+	if (is_on) {
+		if (musb->set_clock)
+			musb->set_clock(musb->clock, 1);
+		timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
+		musb->xceiv.default_a = 1;
+		musb->xceiv.state = OTG_STATE_A_WAIT_VRISE;
+		devctl |= MUSB_DEVCTL_SESSION;
+
+		conf |= TUSB_DEV_CONF_USB_HOST_MODE;
+		MUSB_HST_MODE(musb);
+	} else {
+		u32	otg_stat;
+
+		timer = 0;
+
+		/* If ID pin is grounded, we want to be a_idle */
+		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+		if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
+			switch (musb->xceiv.state) {
+			case OTG_STATE_A_WAIT_VRISE:
+			case OTG_STATE_A_WAIT_BCON:
+				musb->xceiv.state = OTG_STATE_A_WAIT_VFALL;
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				musb->xceiv.state = OTG_STATE_A_IDLE;
+				break;
+			default:
+				musb->xceiv.state = OTG_STATE_A_IDLE;
+			}
+			musb->is_active = 0;
+			musb->xceiv.default_a = 1;
+			MUSB_HST_MODE(musb);
+		} else {
+			musb->is_active = 0;
+			musb->xceiv.default_a = 0;
+			musb->xceiv.state = OTG_STATE_B_IDLE;
+			MUSB_DEV_MODE(musb);
+		}
+
+		devctl &= ~MUSB_DEVCTL_SESSION;
+		conf &= ~TUSB_DEV_CONF_USB_HOST_MODE;
+		if (musb->set_clock)
+			musb->set_clock(musb->clock, 0);
+	}
+	prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+
+	musb_writel(tbase, TUSB_PRCM_MNGMT, prcm);
+	musb_writel(tbase, TUSB_DEV_OTG_TIMER, timer);
+	musb_writel(tbase, TUSB_DEV_CONF, conf);
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+	DBG(1, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n",
+		otg_state_string(musb),
+		musb_readb(musb->mregs, MUSB_DEVCTL),
+		musb_readl(tbase, TUSB_DEV_OTG_STAT),
+		conf, prcm);
+}
+
+/*
+ * Sets the mode to OTG, peripheral or host by changing the ID detection.
+ * Caller must take care of locking.
+ *
+ * Note that if a mini-A cable is plugged in the ID line will stay down as
+ * the weak ID pull-up is not able to pull the ID up.
+ *
+ * REVISIT: It would be possible to add support for changing between host
+ * and peripheral modes in non-OTG configurations by reconfiguring hardware
+ * and then setting musb->board_mode. For now, only support OTG mode.
+ */
+void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	u32		otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf;
+
+	if (musb->board_mode != MUSB_OTG) {
+		ERR("Changing mode currently only supported in OTG mode\n");
+		return;
+	}
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+	phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+	dev_conf = musb_readl(tbase, TUSB_DEV_CONF);
+
+	switch (musb_mode) {
+
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+	case MUSB_HOST:		/* Disable PHY ID detect, ground ID */
+		phy_otg_ctrl &= ~TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf |= TUSB_DEV_CONF_ID_SEL;
+		dev_conf &= ~TUSB_DEV_CONF_SOFT_ID;
+		break;
+#endif
+
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	case MUSB_PERIPHERAL:	/* Disable PHY ID detect, keep ID pull-up on */
+		phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf |= (TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+		break;
+#endif
+
+#ifdef CONFIG_USB_MUSB_OTG
+	case MUSB_OTG:		/* Use PHY ID detection */
+		phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+		dev_conf &= ~(TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+		break;
+#endif
+
+	default:
+		DBG(2, "Trying to set unknown mode %i\n", musb_mode);
+	}
+
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL,
+			TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl);
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE,
+			TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena);
+	musb_writel(tbase, TUSB_DEV_CONF, dev_conf);
+
+	otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	if ((musb_mode == MUSB_PERIPHERAL) &&
+		!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS))
+			INFO("Cannot be peripheral with mini-A cable "
+			"otg_stat: %08x\n", otg_stat);
+}
+
+static inline unsigned long
+tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
+{
+	u32		otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+	unsigned long	idle_timeout = 0;
+
+	/* ID pin */
+	if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) {
+		int	default_a;
+
+		if (is_otg_enabled(musb))
+			default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS);
+		else
+			default_a = is_host_enabled(musb);
+		DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
+		musb->xceiv.default_a = default_a;
+		tusb_source_power(musb, default_a);
+
+		/* Don't allow idling immediately */
+		if (default_a)
+			idle_timeout = jiffies + (HZ * 3);
+	}
+
+	/* VBUS state change */
+	if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
+
+		/* B-dev state machine:  no vbus ~= disconnect */
+		if ((is_otg_enabled(musb) && !musb->xceiv.default_a)
+				|| !is_host_enabled(musb)) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+			/* ? musb_root_disconnect(musb); */
+			musb->port1_status &=
+				~(USB_PORT_STAT_CONNECTION
+				| USB_PORT_STAT_ENABLE
+				| USB_PORT_STAT_LOW_SPEED
+				| USB_PORT_STAT_HIGH_SPEED
+				| USB_PORT_STAT_TEST
+				);
+#endif
+
+			if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
+				DBG(1, "Forcing disconnect (no interrupt)\n");
+				if (musb->xceiv.state != OTG_STATE_B_IDLE) {
+					/* INTR_DISCONNECT can hide... */
+					musb->xceiv.state = OTG_STATE_B_IDLE;
+					musb->int_usb |= MUSB_INTR_DISCONNECT;
+				}
+				musb->is_active = 0;
+			}
+			DBG(2, "vbus change, %s, otg %03x\n",
+				otg_state_string(musb), otg_stat);
+			idle_timeout = jiffies + (1 * HZ);
+			schedule_work(&musb->irq_work);
+
+		} else /* A-dev state machine */ {
+			DBG(2, "vbus change, %s, otg %03x\n",
+				otg_state_string(musb), otg_stat);
+
+			switch (musb->xceiv.state) {
+			case OTG_STATE_A_IDLE:
+				DBG(2, "Got SRP, turning on VBUS\n");
+				musb_set_vbus(musb, 1);
+
+				/* CONNECT can wake if a_wait_bcon is set */
+				if (musb->a_wait_bcon != 0)
+					musb->is_active = 0;
+				else
+					musb->is_active = 1;
+
+				/*
+				 * OPT FS A TD.4.6 needs few seconds for
+				 * A_WAIT_VRISE
+				 */
+				idle_timeout = jiffies + (2 * HZ);
+
+				break;
+			case OTG_STATE_A_WAIT_VRISE:
+				/* ignore; A-session-valid < VBUS_VALID/2,
+				 * we monitor this with the timer
+				 */
+				break;
+			case OTG_STATE_A_WAIT_VFALL:
+				/* REVISIT this irq triggers during short
+				 * spikes caused by enumeration ...
+				 */
+				if (musb->vbuserr_retry) {
+					musb->vbuserr_retry--;
+					tusb_source_power(musb, 1);
+				} else {
+					musb->vbuserr_retry
+						= VBUSERR_RETRY_COUNT;
+					tusb_source_power(musb, 0);
+				}
+				break;
+			default:
+				break;
+			}
+		}
+	}
+
+	/* OTG timer expiration */
+	if (int_src & TUSB_INT_SRC_OTG_TIMEOUT) {
+		u8	devctl;
+
+		DBG(4, "%s timer, %03x\n", otg_state_string(musb), otg_stat);
+
+		switch (musb->xceiv.state) {
+		case OTG_STATE_A_WAIT_VRISE:
+			/* VBUS has probably been valid for a while now,
+			 * but may well have bounced out of range a bit
+			 */
+			devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+			if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID) {
+				if ((devctl & MUSB_DEVCTL_VBUS)
+						!= MUSB_DEVCTL_VBUS) {
+					DBG(2, "devctl %02x\n", devctl);
+					break;
+				}
+				musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+				musb->is_active = 0;
+				idle_timeout = jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon);
+			} else {
+				/* REVISIT report overcurrent to hub? */
+				ERR("vbus too slow, devctl %02x\n", devctl);
+				tusb_source_power(musb, 0);
+			}
+			break;
+		case OTG_STATE_A_WAIT_BCON:
+			if (musb->a_wait_bcon != 0)
+				idle_timeout = jiffies
+					+ msecs_to_jiffies(musb->a_wait_bcon);
+			break;
+		case OTG_STATE_A_SUSPEND:
+			break;
+		case OTG_STATE_B_WAIT_ACON:
+			break;
+		default:
+			break;
+		}
+	}
+	schedule_work(&musb->irq_work);
+
+	return idle_timeout;
+}
+
+static irqreturn_t tusb_interrupt(int irq, void *__hci)
+{
+	struct musb	*musb = __hci;
+	void __iomem	*tbase = musb->ctrl_base;
+	unsigned long	flags, idle_timeout = 0;
+	u32		int_mask, int_src;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* Mask all interrupts to allow using both edge and level GPIO irq */
+	int_mask = musb_readl(tbase, TUSB_INT_MASK);
+	musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+
+	int_src = musb_readl(tbase, TUSB_INT_SRC) & ~TUSB_INT_SRC_RESERVED_BITS;
+	DBG(3, "TUSB IRQ %08x\n", int_src);
+
+	musb->int_usb = (u8) int_src;
+
+	/* Acknowledge wake-up source interrupts */
+	if (int_src & TUSB_INT_SRC_DEV_WAKEUP) {
+		u32	reg;
+		u32	i;
+
+		if (tusb_get_revision(musb) == TUSB_REV_30)
+			tusb_wbus_quirk(musb, 0);
+
+		/* there are issues re-locking the PLL on wakeup ... */
+
+		/* work around issue 8 */
+		for (i = 0xf7f7f7; i > 0xf7f7f7 - 1000; i--) {
+			musb_writel(tbase, TUSB_SCRATCH_PAD, 0);
+			musb_writel(tbase, TUSB_SCRATCH_PAD, i);
+			reg = musb_readl(tbase, TUSB_SCRATCH_PAD);
+			if (reg == i)
+				break;
+			DBG(6, "TUSB NOR not ready\n");
+		}
+
+		/* work around issue 13 (2nd half) */
+		tusb_set_clock_source(musb, 1);
+
+		reg = musb_readl(tbase, TUSB_PRCM_WAKEUP_SOURCE);
+		musb_writel(tbase, TUSB_PRCM_WAKEUP_CLEAR, reg);
+		if (reg & ~TUSB_PRCM_WNORCS) {
+			musb->is_active = 1;
+			schedule_work(&musb->irq_work);
+		}
+		DBG(3, "wake %sactive %02x\n",
+				musb->is_active ? "" : "in", reg);
+
+		/* REVISIT host side TUSB_PRCM_WHOSTDISCON, TUSB_PRCM_WBUS */
+	}
+
+	if (int_src & TUSB_INT_SRC_USB_IP_CONN)
+		del_timer(&musb_idle_timer);
+
+	/* OTG state change reports (annoyingly) not issued by Mentor core */
+	if (int_src & (TUSB_INT_SRC_VBUS_SENSE_CHNG
+				| TUSB_INT_SRC_OTG_TIMEOUT
+				| TUSB_INT_SRC_ID_STATUS_CHNG))
+		idle_timeout = tusb_otg_ints(musb, int_src, tbase);
+
+	/* TX dma callback must be handled here, RX dma callback is
+	 * handled in tusb_omap_dma_cb.
+	 */
+	if ((int_src & TUSB_INT_SRC_TXRX_DMA_DONE)) {
+		u32	dma_src = musb_readl(tbase, TUSB_DMA_INT_SRC);
+		u32	real_dma_src = musb_readl(tbase, TUSB_DMA_INT_MASK);
+
+		DBG(3, "DMA IRQ %08x\n", dma_src);
+		real_dma_src = ~real_dma_src & dma_src;
+		if (tusb_dma_omap() && real_dma_src) {
+			int	tx_source = (real_dma_src & 0xffff);
+			int	i;
+
+			for (i = 1; i <= 15; i++) {
+				if (tx_source & (1 << i)) {
+					DBG(3, "completing ep%i %s\n", i, "tx");
+					musb_dma_completion(musb, i, 1);
+				}
+			}
+		}
+		musb_writel(tbase, TUSB_DMA_INT_CLEAR, dma_src);
+	}
+
+	/* EP interrupts. In OCP mode tusb6010 mirrors the MUSB interrupts */
+	if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX)) {
+		u32	musb_src = musb_readl(tbase, TUSB_USBIP_INT_SRC);
+
+		musb_writel(tbase, TUSB_USBIP_INT_CLEAR, musb_src);
+		musb->int_rx = (((musb_src >> 16) & 0xffff) << 1);
+		musb->int_tx = (musb_src & 0xffff);
+	} else {
+		musb->int_rx = 0;
+		musb->int_tx = 0;
+	}
+
+	if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX | 0xff))
+		musb_interrupt(musb);
+
+	/* Acknowledge TUSB interrupts. Clear only non-reserved bits */
+	musb_writel(tbase, TUSB_INT_SRC_CLEAR,
+		int_src & ~TUSB_INT_MASK_RESERVED_BITS);
+
+	musb_platform_try_idle(musb, idle_timeout);
+
+	musb_writel(tbase, TUSB_INT_MASK, int_mask);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int dma_off;
+
+/*
+ * Enables TUSB6010. Caller must take care of locking.
+ * REVISIT:
+ * - Check what is unnecessary in MGC_HdrcStart()
+ */
+void musb_platform_enable(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/* Setup TUSB6010 main interrupt mask. Enable all interrupts except SOF.
+	 * REVISIT: Enable and deal with TUSB_INT_SRC_USB_IP_SOF */
+	musb_writel(tbase, TUSB_INT_MASK, TUSB_INT_SRC_USB_IP_SOF);
+
+	/* Setup TUSB interrupt, disable DMA and GPIO interrupts */
+	musb_writel(tbase, TUSB_USBIP_INT_MASK, 0);
+	musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+	/* Clear all subsystem interrups */
+	musb_writel(tbase, TUSB_USBIP_INT_CLEAR, 0x7fffffff);
+	musb_writel(tbase, TUSB_DMA_INT_CLEAR, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_CLEAR, 0x1ff);
+
+	/* Acknowledge pending interrupt(s) */
+	musb_writel(tbase, TUSB_INT_SRC_CLEAR, ~TUSB_INT_MASK_RESERVED_BITS);
+
+	/* Only 0 clock cycles for minimum interrupt de-assertion time and
+	 * interrupt polarity active low seems to work reliably here */
+	musb_writel(tbase, TUSB_INT_CTRL_CONF,
+			TUSB_INT_CTRL_CONF_INT_RELCYC(0));
+
+	set_irq_type(musb->nIrq, IRQ_TYPE_LEVEL_LOW);
+
+	/* maybe force into the Default-A OTG state machine */
+	if (!(musb_readl(tbase, TUSB_DEV_OTG_STAT)
+			& TUSB_DEV_OTG_STAT_ID_STATUS))
+		musb_writel(tbase, TUSB_INT_SRC_SET,
+				TUSB_INT_SRC_ID_STATUS_CHNG);
+
+	if (is_dma_capable() && dma_off)
+		printk(KERN_WARNING "%s %s: dma not reactivated\n",
+				__FILE__, __func__);
+	else
+		dma_off = 1;
+}
+
+/*
+ * Disables TUSB6010. Caller must take care of locking.
+ */
+void musb_platform_disable(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/* FIXME stop DMA, IRQs, timers, ... */
+
+	/* disable all IRQs */
+	musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+	musb_writel(tbase, TUSB_USBIP_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+	del_timer(&musb_idle_timer);
+
+	if (is_dma_capable() && !dma_off) {
+		printk(KERN_WARNING "%s %s: dma still active\n",
+				__FILE__, __func__);
+		dma_off = 1;
+	}
+}
+
+/*
+ * Sets up TUSB6010 CPU interface specific signals and registers
+ * Note: Settings optimized for OMAP24xx
+ */
+static void __init tusb_setup_cpu_interface(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+
+	/*
+	 * Disable GPIO[5:0] pullups (used as output DMA requests)
+	 * Don't disable GPIO[7:6] as they are needed for wake-up.
+	 */
+	musb_writel(tbase, TUSB_PULLUP_1_CTRL, 0x0000003F);
+
+	/* Disable all pullups on NOR IF, DMAREQ0 and DMAREQ1 */
+	musb_writel(tbase, TUSB_PULLUP_2_CTRL, 0x01FFFFFF);
+
+	/* Turn GPIO[5:0] to DMAREQ[5:0] signals */
+	musb_writel(tbase, TUSB_GPIO_CONF, TUSB_GPIO_CONF_DMAREQ(0x3f));
+
+	/* Burst size 16x16 bits, all six DMA requests enabled, DMA request
+	 * de-assertion time 2 system clocks p 62 */
+	musb_writel(tbase, TUSB_DMA_REQ_CONF,
+		TUSB_DMA_REQ_CONF_BURST_SIZE(2) |
+		TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f) |
+		TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
+
+	/* Set 0 wait count for synchronous burst access */
+	musb_writel(tbase, TUSB_WAIT_COUNT, 1);
+}
+
+static int __init tusb_start(struct musb *musb)
+{
+	void __iomem	*tbase = musb->ctrl_base;
+	int		ret = 0;
+	unsigned long	flags;
+	u32		reg;
+
+	if (musb->board_set_power)
+		ret = musb->board_set_power(1);
+	if (ret != 0) {
+		printk(KERN_ERR "tusb: Cannot enable TUSB6010\n");
+		return ret;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb_readl(tbase, TUSB_PROD_TEST_RESET) !=
+		TUSB_PROD_TEST_RESET_VAL) {
+		printk(KERN_ERR "tusb: Unable to detect TUSB6010\n");
+		goto err;
+	}
+
+	ret = tusb_print_revision(musb);
+	if (ret < 2) {
+		printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n",
+				ret);
+		goto err;
+	}
+
+	/* The uint bit for "USB non-PDR interrupt enable" has to be 1 when
+	 * NOR FLASH interface is used */
+	musb_writel(tbase, TUSB_VLYNQ_CTRL, 8);
+
+	/* Select PHY free running 60MHz as a system clock */
+	tusb_set_clock_source(musb, 1);
+
+	/* VBus valid timer 1us, disable DFT/Debug and VLYNQ clocks for
+	 * power saving, enable VBus detect and session end comparators,
+	 * enable IDpullup, enable VBus charging */
+	musb_writel(tbase, TUSB_PRCM_MNGMT,
+		TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(0xa) |
+		TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN |
+		TUSB_PRCM_MNGMT_OTG_SESS_END_EN |
+		TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN |
+		TUSB_PRCM_MNGMT_OTG_ID_PULLUP);
+	tusb_setup_cpu_interface(musb);
+
+	/* simplify:  always sense/pullup ID pins, as if in OTG mode */
+	reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+	reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, reg);
+
+	reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+	reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+	musb_writel(tbase, TUSB_PHY_OTG_CTRL, reg);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return 0;
+
+err:
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	if (musb->board_set_power)
+		musb->board_set_power(0);
+
+	return -ENODEV;
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+	struct platform_device	*pdev;
+	struct resource		*mem;
+	void __iomem		*sync;
+	int			ret;
+
+	pdev = to_platform_device(musb->controller);
+
+	/* dma address for async dma */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	musb->async = mem->start;
+
+	/* dma address for sync dma */
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!mem) {
+		pr_debug("no sync dma resource?\n");
+		return -ENODEV;
+	}
+	musb->sync = mem->start;
+
+	sync = ioremap(mem->start, mem->end - mem->start + 1);
+	if (!sync) {
+		pr_debug("ioremap for sync failed\n");
+		return -ENOMEM;
+	}
+	musb->sync_va = sync;
+
+	/* Offsets from base: VLYNQ at 0x000, MUSB regs at 0x400,
+	 * FIFOs at 0x600, TUSB at 0x800
+	 */
+	musb->mregs += TUSB_BASE_OFFSET;
+
+	ret = tusb_start(musb);
+	if (ret) {
+		printk(KERN_ERR "Could not start tusb6010 (%d)\n",
+				ret);
+		return -ENODEV;
+	}
+	musb->isr = tusb_interrupt;
+
+	if (is_host_enabled(musb))
+		musb->board_set_vbus = tusb_source_power;
+	if (is_peripheral_enabled(musb))
+		musb->xceiv.set_power = tusb_draw_power;
+
+	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+
+	return ret;
+}
+
+int musb_platform_exit(struct musb *musb)
+{
+	del_timer_sync(&musb_idle_timer);
+
+	if (musb->board_set_power)
+		musb->board_set_power(0);
+
+	iounmap(musb->sync_va);
+
+	return 0;
+}
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
new file mode 100644
index 00000000000..ab8c96286ce
--- /dev/null
+++ b/drivers/usb/musb/tusb6010.h
@@ -0,0 +1,233 @@
+/*
+ * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __TUSB6010_H__
+#define __TUSB6010_H__
+
+extern u8 tusb_get_revision(struct musb *musb);
+
+#ifdef CONFIG_USB_TUSB6010
+#define musb_in_tusb()			1
+#else
+#define musb_in_tusb()			0
+#endif
+
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+#define tusb_dma_omap()			1
+#else
+#define tusb_dma_omap()			0
+#endif
+
+/* VLYNQ control register. 32-bit at offset 0x000 */
+#define TUSB_VLYNQ_CTRL			0x004
+
+/* Mentor Graphics OTG core registers. 8,- 16- and 32-bit at offset 0x400 */
+#define TUSB_BASE_OFFSET		0x400
+
+/* FIFO registers 32-bit at offset 0x600 */
+#define TUSB_FIFO_BASE			0x600
+
+/* Device System & Control registers. 32-bit at offset 0x800 */
+#define TUSB_SYS_REG_BASE		0x800
+
+#define TUSB_DEV_CONF			(TUSB_SYS_REG_BASE + 0x000)
+#define		TUSB_DEV_CONF_USB_HOST_MODE		(1 << 16)
+#define		TUSB_DEV_CONF_PROD_TEST_MODE		(1 << 15)
+#define		TUSB_DEV_CONF_SOFT_ID			(1 << 1)
+#define		TUSB_DEV_CONF_ID_SEL			(1 << 0)
+
+#define TUSB_PHY_OTG_CTRL_ENABLE	(TUSB_SYS_REG_BASE + 0x004)
+#define TUSB_PHY_OTG_CTRL		(TUSB_SYS_REG_BASE + 0x008)
+#define		TUSB_PHY_OTG_CTRL_WRPROTECT		(0xa5 << 24)
+#define		TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP		(1 << 23)
+#define		TUSB_PHY_OTG_CTRL_OTG_VBUS_DET_EN	(1 << 19)
+#define		TUSB_PHY_OTG_CTRL_OTG_SESS_END_EN	(1 << 18)
+#define		TUSB_PHY_OTG_CTRL_TESTM2		(1 << 17)
+#define		TUSB_PHY_OTG_CTRL_TESTM1		(1 << 16)
+#define		TUSB_PHY_OTG_CTRL_TESTM0		(1 << 15)
+#define		TUSB_PHY_OTG_CTRL_TX_DATA2		(1 << 14)
+#define		TUSB_PHY_OTG_CTRL_TX_GZ2		(1 << 13)
+#define		TUSB_PHY_OTG_CTRL_TX_ENABLE2		(1 << 12)
+#define		TUSB_PHY_OTG_CTRL_DM_PULLDOWN		(1 << 11)
+#define		TUSB_PHY_OTG_CTRL_DP_PULLDOWN		(1 << 10)
+#define		TUSB_PHY_OTG_CTRL_OSC_EN		(1 << 9)
+#define		TUSB_PHY_OTG_CTRL_PHYREF_CLKSEL(v)	(((v) & 3) << 7)
+#define		TUSB_PHY_OTG_CTRL_PD			(1 << 6)
+#define		TUSB_PHY_OTG_CTRL_PLL_ON		(1 << 5)
+#define		TUSB_PHY_OTG_CTRL_EXT_RPU		(1 << 4)
+#define		TUSB_PHY_OTG_CTRL_PWR_GOOD		(1 << 3)
+#define		TUSB_PHY_OTG_CTRL_RESET			(1 << 2)
+#define		TUSB_PHY_OTG_CTRL_SUSPENDM		(1 << 1)
+#define		TUSB_PHY_OTG_CTRL_CLK_MODE		(1 << 0)
+
+/*OTG status register */
+#define TUSB_DEV_OTG_STAT		(TUSB_SYS_REG_BASE + 0x00c)
+#define		TUSB_DEV_OTG_STAT_PWR_CLK_GOOD		(1 << 8)
+#define		TUSB_DEV_OTG_STAT_SESS_END		(1 << 7)
+#define		TUSB_DEV_OTG_STAT_SESS_VALID		(1 << 6)
+#define		TUSB_DEV_OTG_STAT_VBUS_VALID		(1 << 5)
+#define		TUSB_DEV_OTG_STAT_VBUS_SENSE		(1 << 4)
+#define		TUSB_DEV_OTG_STAT_ID_STATUS		(1 << 3)
+#define		TUSB_DEV_OTG_STAT_HOST_DISCON		(1 << 2)
+#define		TUSB_DEV_OTG_STAT_LINE_STATE		(3 << 0)
+#define		TUSB_DEV_OTG_STAT_DP_ENABLE		(1 << 1)
+#define		TUSB_DEV_OTG_STAT_DM_ENABLE		(1 << 0)
+
+#define TUSB_DEV_OTG_TIMER		(TUSB_SYS_REG_BASE + 0x010)
+#	define TUSB_DEV_OTG_TIMER_ENABLE		(1 << 31)
+#	define TUSB_DEV_OTG_TIMER_VAL(v)		((v) & 0x07ffffff)
+#define TUSB_PRCM_REV			(TUSB_SYS_REG_BASE + 0x014)
+
+/* PRCM configuration register */
+#define TUSB_PRCM_CONF			(TUSB_SYS_REG_BASE + 0x018)
+#define		TUSB_PRCM_CONF_SFW_CPEN		(1 << 24)
+#define		TUSB_PRCM_CONF_SYS_CLKSEL(v)	(((v) & 3) << 16)
+
+/* PRCM management register */
+#define TUSB_PRCM_MNGMT			(TUSB_SYS_REG_BASE + 0x01c)
+#define		TUSB_PRCM_MNGMT_SRP_FIX_TIMER(v)	(((v) & 0xf) << 25)
+#define		TUSB_PRCM_MNGMT_SRP_FIX_EN		(1 << 24)
+#define		TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(v)	(((v) & 0xf) << 20)
+#define		TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN	(1 << 19)
+#define		TUSB_PRCM_MNGMT_DFT_CLK_DIS		(1 << 18)
+#define		TUSB_PRCM_MNGMT_VLYNQ_CLK_DIS		(1 << 17)
+#define		TUSB_PRCM_MNGMT_OTG_SESS_END_EN		(1 << 10)
+#define		TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN		(1 << 9)
+#define		TUSB_PRCM_MNGMT_OTG_ID_PULLUP		(1 << 8)
+#define		TUSB_PRCM_MNGMT_15_SW_EN		(1 << 4)
+#define		TUSB_PRCM_MNGMT_33_SW_EN		(1 << 3)
+#define		TUSB_PRCM_MNGMT_5V_CPEN			(1 << 2)
+#define		TUSB_PRCM_MNGMT_PM_IDLE			(1 << 1)
+#define		TUSB_PRCM_MNGMT_DEV_IDLE		(1 << 0)
+
+/* Wake-up source clear and mask registers */
+#define TUSB_PRCM_WAKEUP_SOURCE		(TUSB_SYS_REG_BASE + 0x020)
+#define TUSB_PRCM_WAKEUP_CLEAR		(TUSB_SYS_REG_BASE + 0x028)
+#define TUSB_PRCM_WAKEUP_MASK		(TUSB_SYS_REG_BASE + 0x02c)
+#define		TUSB_PRCM_WAKEUP_RESERVED_BITS	(0xffffe << 13)
+#define		TUSB_PRCM_WGPIO_7	(1 << 12)
+#define		TUSB_PRCM_WGPIO_6	(1 << 11)
+#define		TUSB_PRCM_WGPIO_5	(1 << 10)
+#define		TUSB_PRCM_WGPIO_4	(1 << 9)
+#define		TUSB_PRCM_WGPIO_3	(1 << 8)
+#define		TUSB_PRCM_WGPIO_2	(1 << 7)
+#define		TUSB_PRCM_WGPIO_1	(1 << 6)
+#define		TUSB_PRCM_WGPIO_0	(1 << 5)
+#define		TUSB_PRCM_WHOSTDISCON	(1 << 4)	/* Host disconnect */
+#define		TUSB_PRCM_WBUS		(1 << 3)	/* USB bus resume */
+#define		TUSB_PRCM_WNORCS	(1 << 2)	/* NOR chip select */
+#define		TUSB_PRCM_WVBUS		(1 << 1)	/* OTG PHY VBUS */
+#define		TUSB_PRCM_WID		(1 << 0)	/* OTG PHY ID detect */
+
+#define TUSB_PULLUP_1_CTRL		(TUSB_SYS_REG_BASE + 0x030)
+#define TUSB_PULLUP_2_CTRL		(TUSB_SYS_REG_BASE + 0x034)
+#define TUSB_INT_CTRL_REV		(TUSB_SYS_REG_BASE + 0x038)
+#define TUSB_INT_CTRL_CONF		(TUSB_SYS_REG_BASE + 0x03c)
+#define TUSB_USBIP_INT_SRC		(TUSB_SYS_REG_BASE + 0x040)
+#define TUSB_USBIP_INT_SET		(TUSB_SYS_REG_BASE + 0x044)
+#define TUSB_USBIP_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x048)
+#define TUSB_USBIP_INT_MASK		(TUSB_SYS_REG_BASE + 0x04c)
+#define TUSB_DMA_INT_SRC		(TUSB_SYS_REG_BASE + 0x050)
+#define TUSB_DMA_INT_SET		(TUSB_SYS_REG_BASE + 0x054)
+#define TUSB_DMA_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x058)
+#define TUSB_DMA_INT_MASK		(TUSB_SYS_REG_BASE + 0x05c)
+#define TUSB_GPIO_INT_SRC		(TUSB_SYS_REG_BASE + 0x060)
+#define TUSB_GPIO_INT_SET		(TUSB_SYS_REG_BASE + 0x064)
+#define TUSB_GPIO_INT_CLEAR		(TUSB_SYS_REG_BASE + 0x068)
+#define TUSB_GPIO_INT_MASK		(TUSB_SYS_REG_BASE + 0x06c)
+
+/* NOR flash interrupt source registers */
+#define TUSB_INT_SRC			(TUSB_SYS_REG_BASE + 0x070)
+#define TUSB_INT_SRC_SET		(TUSB_SYS_REG_BASE + 0x074)
+#define TUSB_INT_SRC_CLEAR		(TUSB_SYS_REG_BASE + 0x078)
+#define TUSB_INT_MASK			(TUSB_SYS_REG_BASE + 0x07c)
+#define		TUSB_INT_SRC_TXRX_DMA_DONE		(1 << 24)
+#define		TUSB_INT_SRC_USB_IP_CORE		(1 << 17)
+#define		TUSB_INT_SRC_OTG_TIMEOUT		(1 << 16)
+#define		TUSB_INT_SRC_VBUS_SENSE_CHNG		(1 << 15)
+#define		TUSB_INT_SRC_ID_STATUS_CHNG		(1 << 14)
+#define		TUSB_INT_SRC_DEV_WAKEUP			(1 << 13)
+#define		TUSB_INT_SRC_DEV_READY			(1 << 12)
+#define		TUSB_INT_SRC_USB_IP_TX			(1 << 9)
+#define		TUSB_INT_SRC_USB_IP_RX			(1 << 8)
+#define		TUSB_INT_SRC_USB_IP_VBUS_ERR		(1 << 7)
+#define		TUSB_INT_SRC_USB_IP_VBUS_REQ		(1 << 6)
+#define		TUSB_INT_SRC_USB_IP_DISCON		(1 << 5)
+#define		TUSB_INT_SRC_USB_IP_CONN		(1 << 4)
+#define		TUSB_INT_SRC_USB_IP_SOF			(1 << 3)
+#define		TUSB_INT_SRC_USB_IP_RST_BABBLE		(1 << 2)
+#define		TUSB_INT_SRC_USB_IP_RESUME		(1 << 1)
+#define		TUSB_INT_SRC_USB_IP_SUSPEND		(1 << 0)
+
+/* NOR flash interrupt registers reserved bits. Must be written as 0 */
+#define		TUSB_INT_MASK_RESERVED_17		(0x3fff << 17)
+#define		TUSB_INT_MASK_RESERVED_13		(1 << 13)
+#define		TUSB_INT_MASK_RESERVED_8		(0xf << 8)
+#define		TUSB_INT_SRC_RESERVED_26		(0x1f << 26)
+#define		TUSB_INT_SRC_RESERVED_18		(0x3f << 18)
+#define		TUSB_INT_SRC_RESERVED_10		(0x03 << 10)
+
+/* Reserved bits for NOR flash interrupt mask and clear register */
+#define		TUSB_INT_MASK_RESERVED_BITS	(TUSB_INT_MASK_RESERVED_17 | \
+						TUSB_INT_MASK_RESERVED_13 | \
+						TUSB_INT_MASK_RESERVED_8)
+
+/* Reserved bits for NOR flash interrupt status register */
+#define		TUSB_INT_SRC_RESERVED_BITS	(TUSB_INT_SRC_RESERVED_26 | \
+						TUSB_INT_SRC_RESERVED_18 | \
+						TUSB_INT_SRC_RESERVED_10)
+
+#define TUSB_GPIO_REV			(TUSB_SYS_REG_BASE + 0x080)
+#define TUSB_GPIO_CONF			(TUSB_SYS_REG_BASE + 0x084)
+#define TUSB_DMA_CTRL_REV		(TUSB_SYS_REG_BASE + 0x100)
+#define TUSB_DMA_REQ_CONF		(TUSB_SYS_REG_BASE + 0x104)
+#define TUSB_EP0_CONF			(TUSB_SYS_REG_BASE + 0x108)
+#define TUSB_DMA_EP_MAP			(TUSB_SYS_REG_BASE + 0x148)
+
+/* Offsets from each ep base register */
+#define TUSB_EP_TX_OFFSET		0x10c	/* EP_IN in docs */
+#define TUSB_EP_RX_OFFSET		0x14c	/* EP_OUT in docs */
+#define TUSB_EP_MAX_PACKET_SIZE_OFFSET	0x188
+
+#define TUSB_WAIT_COUNT			(TUSB_SYS_REG_BASE + 0x1c8)
+#define TUSB_SCRATCH_PAD		(TUSB_SYS_REG_BASE + 0x1c4)
+#define TUSB_PROD_TEST_RESET		(TUSB_SYS_REG_BASE + 0x1d8)
+
+/* Device System & Control register bitfields */
+#define TUSB_INT_CTRL_CONF_INT_RELCYC(v)	(((v) & 0x7) << 18)
+#define TUSB_INT_CTRL_CONF_INT_POLARITY		(1 << 17)
+#define TUSB_INT_CTRL_CONF_INT_MODE		(1 << 16)
+#define TUSB_GPIO_CONF_DMAREQ(v)		(((v) & 0x3f) << 24)
+#define TUSB_DMA_REQ_CONF_BURST_SIZE(v)		(((v) & 3) << 26)
+#define TUSB_DMA_REQ_CONF_DMA_REQ_EN(v)		(((v) & 0x3f) << 20)
+#define TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(v)	(((v) & 0xf) << 16)
+#define TUSB_EP0_CONFIG_SW_EN			(1 << 8)
+#define TUSB_EP0_CONFIG_DIR_TX			(1 << 7)
+#define TUSB_EP0_CONFIG_XFR_SIZE(v)		((v) & 0x7f)
+#define TUSB_EP_CONFIG_SW_EN			(1 << 31)
+#define TUSB_EP_CONFIG_XFR_SIZE(v)		((v) & 0x7fffffff)
+#define TUSB_PROD_TEST_RESET_VAL		0xa596
+#define TUSB_EP_FIFO(ep)			(TUSB_FIFO_BASE + (ep) * 0x20)
+
+#define TUSB_DIDR1_LO				(TUSB_SYS_REG_BASE + 0x1f8)
+#define TUSB_DIDR1_HI				(TUSB_SYS_REG_BASE + 0x1fc)
+#define		TUSB_DIDR1_HI_CHIP_REV(v)		(((v) >> 17) & 0xf)
+#define			TUSB_DIDR1_HI_REV_20		0
+#define			TUSB_DIDR1_HI_REV_30		1
+#define			TUSB_DIDR1_HI_REV_31		2
+
+#define TUSB_REV_10	0x10
+#define TUSB_REV_20	0x20
+#define TUSB_REV_30	0x30
+#define TUSB_REV_31	0x31
+
+#endif /* __TUSB6010_H__ */
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
new file mode 100644
index 00000000000..52f7f29cebd
--- /dev/null
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -0,0 +1,719 @@
+/*
+ * TUSB6010 USB 2.0 OTG Dual Role controller OMAP DMA interface
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+
+#include "musb_core.h"
+
+#define to_chdat(c)		((struct tusb_omap_dma_ch *)(c)->private_data)
+
+#define MAX_DMAREQ		5	/* REVISIT: Really 6, but req5 not OK */
+
+struct tusb_omap_dma_ch {
+	struct musb		*musb;
+	void __iomem		*tbase;
+	unsigned long		phys_offset;
+	int			epnum;
+	u8			tx;
+	struct musb_hw_ep	*hw_ep;
+
+	int			ch;
+	s8			dmareq;
+	s8			sync_dev;
+
+	struct tusb_omap_dma	*tusb_dma;
+
+	void __iomem		*dma_addr;
+
+	u32			len;
+	u16			packet_sz;
+	u16			transfer_packet_sz;
+	u32			transfer_len;
+	u32			completed_len;
+};
+
+struct tusb_omap_dma {
+	struct dma_controller		controller;
+	struct musb			*musb;
+	void __iomem			*tbase;
+
+	int				ch;
+	s8				dmareq;
+	s8				sync_dev;
+	unsigned			multichannel:1;
+};
+
+static int tusb_omap_dma_start(struct dma_controller *c)
+{
+	struct tusb_omap_dma	*tusb_dma;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+
+	/* DBG(3, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
+
+	return 0;
+}
+
+static int tusb_omap_dma_stop(struct dma_controller *c)
+{
+	struct tusb_omap_dma	*tusb_dma;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+
+	/* DBG(3, "ep%i ch: %i\n", chdat->epnum, chdat->ch); */
+
+	return 0;
+}
+
+/*
+ * Allocate dmareq0 to the current channel unless it's already taken
+ */
+static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+
+	if (reg != 0) {
+		DBG(3, "ep%i dmareq0 is busy for ep%i\n",
+			chdat->epnum, reg & 0xf);
+		return -EAGAIN;
+	}
+
+	if (chdat->tx)
+		reg = (1 << 4) | chdat->epnum;
+	else
+		reg = chdat->epnum;
+
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	return 0;
+}
+
+static inline void tusb_omap_free_shared_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+
+	if ((reg & 0xf) != chdat->epnum) {
+		printk(KERN_ERR "ep%i trying to release dmareq0 for ep%i\n",
+			chdat->epnum, reg & 0xf);
+		return;
+	}
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, 0);
+}
+
+/*
+ * See also musb_dma_completion in plat_uds.c and musb_g_[tx|rx]() in
+ * musb_gadget.c.
+ */
+static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data)
+{
+	struct dma_channel	*channel = (struct dma_channel *)data;
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct tusb_omap_dma	*tusb_dma = chdat->tusb_dma;
+	struct musb		*musb = chdat->musb;
+	struct musb_hw_ep	*hw_ep = chdat->hw_ep;
+	void __iomem		*ep_conf = hw_ep->conf;
+	void __iomem		*mbase = musb->mregs;
+	unsigned long		remaining, flags, pio;
+	int			ch;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (tusb_dma->multichannel)
+		ch = chdat->ch;
+	else
+		ch = tusb_dma->ch;
+
+	if (ch_status != OMAP_DMA_BLOCK_IRQ)
+		printk(KERN_ERR "TUSB DMA error status: %i\n", ch_status);
+
+	DBG(3, "ep%i %s dma callback ch: %i status: %x\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx",
+		ch, ch_status);
+
+	if (chdat->tx)
+		remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
+	else
+		remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
+
+	remaining = TUSB_EP_CONFIG_XFR_SIZE(remaining);
+
+	/* HW issue #10: XFR_SIZE may get corrupt on DMA (both async & sync) */
+	if (unlikely(remaining > chdat->transfer_len)) {
+		DBG(2, "Corrupt %s dma ch%i XFR_SIZE: 0x%08lx\n",
+			chdat->tx ? "tx" : "rx", chdat->ch,
+			remaining);
+		remaining = 0;
+	}
+
+	channel->actual_len = chdat->transfer_len - remaining;
+	pio = chdat->len - channel->actual_len;
+
+	DBG(3, "DMA remaining %lu/%u\n", remaining, chdat->transfer_len);
+
+	/* Transfer remaining 1 - 31 bytes */
+	if (pio > 0 && pio < 32) {
+		u8	*buf;
+
+		DBG(3, "Using PIO for remaining %lu bytes\n", pio);
+		buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len;
+		if (chdat->tx) {
+			dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
+					chdat->transfer_len, DMA_TO_DEVICE);
+			musb_write_fifo(hw_ep, pio, buf);
+		} else {
+			musb_read_fifo(hw_ep, pio, buf);
+			dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
+					chdat->transfer_len, DMA_FROM_DEVICE);
+		}
+		channel->actual_len += pio;
+	}
+
+	if (!tusb_dma->multichannel)
+		tusb_omap_free_shared_dmareq(chdat);
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+
+	/* Handle only RX callbacks here. TX callbacks must be handled based
+	 * on the TUSB DMA status interrupt.
+	 * REVISIT: Use both TUSB DMA status interrupt and OMAP DMA callback
+	 * interrupt for RX and TX.
+	 */
+	if (!chdat->tx)
+		musb_dma_completion(musb, chdat->epnum, chdat->tx);
+
+	/* We must terminate short tx transfers manually by setting TXPKTRDY.
+	 * REVISIT: This same problem may occur with other MUSB dma as well.
+	 * Easy to test with g_ether by pinging the MUSB board with ping -s54.
+	 */
+	if ((chdat->transfer_len < chdat->packet_sz)
+			|| (chdat->transfer_len % chdat->packet_sz != 0)) {
+		u16	csr;
+
+		if (chdat->tx) {
+			DBG(3, "terminating short tx packet\n");
+			musb_ep_select(mbase, chdat->epnum);
+			csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
+			csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY
+				| MUSB_TXCSR_P_WZC_BITS;
+			musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
+		}
+	}
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
+				u8 rndis_mode, dma_addr_t dma_addr, u32 len)
+{
+	struct tusb_omap_dma_ch		*chdat = to_chdat(channel);
+	struct tusb_omap_dma		*tusb_dma = chdat->tusb_dma;
+	struct musb			*musb = chdat->musb;
+	struct musb_hw_ep		*hw_ep = chdat->hw_ep;
+	void __iomem			*mbase = musb->mregs;
+	void __iomem			*ep_conf = hw_ep->conf;
+	dma_addr_t			fifo = hw_ep->fifo_sync;
+	struct omap_dma_channel_params	dma_params;
+	u32				dma_remaining;
+	int				src_burst, dst_burst;
+	u16				csr;
+	int				ch;
+	s8				dmareq;
+	s8				sync_dev;
+
+	if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz))
+		return false;
+
+	/*
+	 * HW issue #10: Async dma will eventually corrupt the XFR_SIZE
+	 * register which will cause missed DMA interrupt. We could try to
+	 * use a timer for the callback, but it is unsafe as the XFR_SIZE
+	 * register is corrupt, and we won't know if the DMA worked.
+	 */
+	if (dma_addr & 0x2)
+		return false;
+
+	/*
+	 * Because of HW issue #10, it seems like mixing sync DMA and async
+	 * PIO access can confuse the DMA. Make sure XFR_SIZE is reset before
+	 * using the channel for DMA.
+	 */
+	if (chdat->tx)
+		dma_remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
+	else
+		dma_remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
+
+	dma_remaining = TUSB_EP_CONFIG_XFR_SIZE(dma_remaining);
+	if (dma_remaining) {
+		DBG(2, "Busy %s dma ch%i, not using: %08x\n",
+			chdat->tx ? "tx" : "rx", chdat->ch,
+			dma_remaining);
+		return false;
+	}
+
+	chdat->transfer_len = len & ~0x1f;
+
+	if (len < packet_sz)
+		chdat->transfer_packet_sz = chdat->transfer_len;
+	else
+		chdat->transfer_packet_sz = packet_sz;
+
+	if (tusb_dma->multichannel) {
+		ch = chdat->ch;
+		dmareq = chdat->dmareq;
+		sync_dev = chdat->sync_dev;
+	} else {
+		if (tusb_omap_use_shared_dmareq(chdat) != 0) {
+			DBG(3, "could not get dma for ep%i\n", chdat->epnum);
+			return false;
+		}
+		if (tusb_dma->ch < 0) {
+			/* REVISIT: This should get blocked earlier, happens
+			 * with MSC ErrorRecoveryTest
+			 */
+			WARN_ON(1);
+			return false;
+		}
+
+		ch = tusb_dma->ch;
+		dmareq = tusb_dma->dmareq;
+		sync_dev = tusb_dma->sync_dev;
+		omap_set_dma_callback(ch, tusb_omap_dma_cb, channel);
+	}
+
+	chdat->packet_sz = packet_sz;
+	chdat->len = len;
+	channel->actual_len = 0;
+	chdat->dma_addr = (void __iomem *)dma_addr;
+	channel->status = MUSB_DMA_STATUS_BUSY;
+
+	/* Since we're recycling dma areas, we need to clean or invalidate */
+	if (chdat->tx)
+		dma_cache_maint(phys_to_virt(dma_addr), len, DMA_TO_DEVICE);
+	else
+		dma_cache_maint(phys_to_virt(dma_addr), len, DMA_FROM_DEVICE);
+
+	/* Use 16-bit transfer if dma_addr is not 32-bit aligned */
+	if ((dma_addr & 0x3) == 0) {
+		dma_params.data_type = OMAP_DMA_DATA_TYPE_S32;
+		dma_params.elem_count = 8;		/* Elements in frame */
+	} else {
+		dma_params.data_type = OMAP_DMA_DATA_TYPE_S16;
+		dma_params.elem_count = 16;		/* Elements in frame */
+		fifo = hw_ep->fifo_async;
+	}
+
+	dma_params.frame_count	= chdat->transfer_len / 32; /* Burst sz frame */
+
+	DBG(3, "ep%i %s dma ch%i dma: %08x len: %u(%u) packet_sz: %i(%i)\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx",
+		ch, dma_addr, chdat->transfer_len, len,
+		chdat->transfer_packet_sz, packet_sz);
+
+	/*
+	 * Prepare omap DMA for transfer
+	 */
+	if (chdat->tx) {
+		dma_params.src_amode	= OMAP_DMA_AMODE_POST_INC;
+		dma_params.src_start	= (unsigned long)dma_addr;
+		dma_params.src_ei	= 0;
+		dma_params.src_fi	= 0;
+
+		dma_params.dst_amode	= OMAP_DMA_AMODE_DOUBLE_IDX;
+		dma_params.dst_start	= (unsigned long)fifo;
+		dma_params.dst_ei	= 1;
+		dma_params.dst_fi	= -31;	/* Loop 32 byte window */
+
+		dma_params.trigger	= sync_dev;
+		dma_params.sync_mode	= OMAP_DMA_SYNC_FRAME;
+		dma_params.src_or_dst_synch	= 0;	/* Dest sync */
+
+		src_burst = OMAP_DMA_DATA_BURST_16;	/* 16x32 read */
+		dst_burst = OMAP_DMA_DATA_BURST_8;	/* 8x32 write */
+	} else {
+		dma_params.src_amode	= OMAP_DMA_AMODE_DOUBLE_IDX;
+		dma_params.src_start	= (unsigned long)fifo;
+		dma_params.src_ei	= 1;
+		dma_params.src_fi	= -31;	/* Loop 32 byte window */
+
+		dma_params.dst_amode	= OMAP_DMA_AMODE_POST_INC;
+		dma_params.dst_start	= (unsigned long)dma_addr;
+		dma_params.dst_ei	= 0;
+		dma_params.dst_fi	= 0;
+
+		dma_params.trigger	= sync_dev;
+		dma_params.sync_mode	= OMAP_DMA_SYNC_FRAME;
+		dma_params.src_or_dst_synch	= 1;	/* Source sync */
+
+		src_burst = OMAP_DMA_DATA_BURST_8;	/* 8x32 read */
+		dst_burst = OMAP_DMA_DATA_BURST_16;	/* 16x32 write */
+	}
+
+	DBG(3, "ep%i %s using %i-bit %s dma from 0x%08lx to 0x%08lx\n",
+		chdat->epnum, chdat->tx ? "tx" : "rx",
+		(dma_params.data_type == OMAP_DMA_DATA_TYPE_S32) ? 32 : 16,
+		((dma_addr & 0x3) == 0) ? "sync" : "async",
+		dma_params.src_start, dma_params.dst_start);
+
+	omap_set_dma_params(ch, &dma_params);
+	omap_set_dma_src_burst_mode(ch, src_burst);
+	omap_set_dma_dest_burst_mode(ch, dst_burst);
+	omap_set_dma_write_mode(ch, OMAP_DMA_WRITE_LAST_NON_POSTED);
+
+	/*
+	 * Prepare MUSB for DMA transfer
+	 */
+	if (chdat->tx) {
+		musb_ep_select(mbase, chdat->epnum);
+		csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
+		csr |= (MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB
+			| MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+		csr &= ~MUSB_TXCSR_P_UNDERRUN;
+		musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
+	} else {
+		musb_ep_select(mbase, chdat->epnum);
+		csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
+		csr |= MUSB_RXCSR_DMAENAB;
+		csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAMODE);
+		musb_writew(hw_ep->regs, MUSB_RXCSR,
+			csr | MUSB_RXCSR_P_WZC_BITS);
+	}
+
+	/*
+	 * Start DMA transfer
+	 */
+	omap_start_dma(ch);
+
+	if (chdat->tx) {
+		/* Send transfer_packet_sz packets at a time */
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
+			chdat->transfer_packet_sz);
+
+		musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
+	} else {
+		/* Receive transfer_packet_sz packets at a time */
+		musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
+			chdat->transfer_packet_sz << 16);
+
+		musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
+			TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
+	}
+
+	return true;
+}
+
+static int tusb_omap_dma_abort(struct dma_channel *channel)
+{
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct tusb_omap_dma	*tusb_dma = chdat->tusb_dma;
+
+	if (!tusb_dma->multichannel) {
+		if (tusb_dma->ch >= 0) {
+			omap_stop_dma(tusb_dma->ch);
+			omap_free_dma(tusb_dma->ch);
+			tusb_dma->ch = -1;
+		}
+
+		tusb_dma->dmareq = -1;
+		tusb_dma->sync_dev = -1;
+	}
+
+	channel->status = MUSB_DMA_STATUS_FREE;
+
+	return 0;
+}
+
+static inline int tusb_omap_dma_allocate_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32		reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+	int		i, dmareq_nr = -1;
+
+	const int sync_dev[6] = {
+		OMAP24XX_DMA_EXT_DMAREQ0,
+		OMAP24XX_DMA_EXT_DMAREQ1,
+		OMAP242X_DMA_EXT_DMAREQ2,
+		OMAP242X_DMA_EXT_DMAREQ3,
+		OMAP242X_DMA_EXT_DMAREQ4,
+		OMAP242X_DMA_EXT_DMAREQ5,
+	};
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		int cur = (reg & (0xf << (i * 5))) >> (i * 5);
+		if (cur == 0) {
+			dmareq_nr = i;
+			break;
+		}
+	}
+
+	if (dmareq_nr == -1)
+		return -EAGAIN;
+
+	reg |= (chdat->epnum << (dmareq_nr * 5));
+	if (chdat->tx)
+		reg |= ((1 << 4) << (dmareq_nr * 5));
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	chdat->dmareq = dmareq_nr;
+	chdat->sync_dev = sync_dev[chdat->dmareq];
+
+	return 0;
+}
+
+static inline void tusb_omap_dma_free_dmareq(struct tusb_omap_dma_ch *chdat)
+{
+	u32 reg;
+
+	if (!chdat || chdat->dmareq < 0)
+		return;
+
+	reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
+	reg &= ~(0x1f << (chdat->dmareq * 5));
+	musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
+
+	chdat->dmareq = -1;
+	chdat->sync_dev = -1;
+}
+
+static struct dma_channel *dma_channel_pool[MAX_DMAREQ];
+
+static struct dma_channel *
+tusb_omap_dma_allocate(struct dma_controller *c,
+		struct musb_hw_ep *hw_ep,
+		u8 tx)
+{
+	int ret, i;
+	const char		*dev_name;
+	struct tusb_omap_dma	*tusb_dma;
+	struct musb		*musb;
+	void __iomem		*tbase;
+	struct dma_channel	*channel = NULL;
+	struct tusb_omap_dma_ch	*chdat = NULL;
+	u32			reg;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+	musb = tusb_dma->musb;
+	tbase = musb->ctrl_base;
+
+	reg = musb_readl(tbase, TUSB_DMA_INT_MASK);
+	if (tx)
+		reg &= ~(1 << hw_ep->epnum);
+	else
+		reg &= ~(1 << (hw_ep->epnum + 15));
+	musb_writel(tbase, TUSB_DMA_INT_MASK, reg);
+
+	/* REVISIT: Why does dmareq5 not work? */
+	if (hw_ep->epnum == 0) {
+		DBG(3, "Not allowing DMA for ep0 %s\n", tx ? "tx" : "rx");
+		return NULL;
+	}
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel *ch = dma_channel_pool[i];
+		if (ch->status == MUSB_DMA_STATUS_UNKNOWN) {
+			ch->status = MUSB_DMA_STATUS_FREE;
+			channel = ch;
+			chdat = ch->private_data;
+			break;
+		}
+	}
+
+	if (!channel)
+		return NULL;
+
+	if (tx) {
+		chdat->tx = 1;
+		dev_name = "TUSB transmit";
+	} else {
+		chdat->tx = 0;
+		dev_name = "TUSB receive";
+	}
+
+	chdat->musb = tusb_dma->musb;
+	chdat->tbase = tusb_dma->tbase;
+	chdat->hw_ep = hw_ep;
+	chdat->epnum = hw_ep->epnum;
+	chdat->dmareq = -1;
+	chdat->completed_len = 0;
+	chdat->tusb_dma = tusb_dma;
+
+	channel->max_len = 0x7fffffff;
+	channel->desired_mode = 0;
+	channel->actual_len = 0;
+
+	if (tusb_dma->multichannel) {
+		ret = tusb_omap_dma_allocate_dmareq(chdat);
+		if (ret != 0)
+			goto free_dmareq;
+
+		ret = omap_request_dma(chdat->sync_dev, dev_name,
+				tusb_omap_dma_cb, channel, &chdat->ch);
+		if (ret != 0)
+			goto free_dmareq;
+	} else if (tusb_dma->ch == -1) {
+		tusb_dma->dmareq = 0;
+		tusb_dma->sync_dev = OMAP24XX_DMA_EXT_DMAREQ0;
+
+		/* Callback data gets set later in the shared dmareq case */
+		ret = omap_request_dma(tusb_dma->sync_dev, "TUSB shared",
+				tusb_omap_dma_cb, NULL, &tusb_dma->ch);
+		if (ret != 0)
+			goto free_dmareq;
+
+		chdat->dmareq = -1;
+		chdat->ch = -1;
+	}
+
+	DBG(3, "ep%i %s dma: %s dma%i dmareq%i sync%i\n",
+		chdat->epnum,
+		chdat->tx ? "tx" : "rx",
+		chdat->ch >= 0 ? "dedicated" : "shared",
+		chdat->ch >= 0 ? chdat->ch : tusb_dma->ch,
+		chdat->dmareq >= 0 ? chdat->dmareq : tusb_dma->dmareq,
+		chdat->sync_dev >= 0 ? chdat->sync_dev : tusb_dma->sync_dev);
+
+	return channel;
+
+free_dmareq:
+	tusb_omap_dma_free_dmareq(chdat);
+
+	DBG(3, "ep%i: Could not get a DMA channel\n", chdat->epnum);
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+
+	return NULL;
+}
+
+static void tusb_omap_dma_release(struct dma_channel *channel)
+{
+	struct tusb_omap_dma_ch	*chdat = to_chdat(channel);
+	struct musb		*musb = chdat->musb;
+	void __iomem		*tbase = musb->ctrl_base;
+	u32			reg;
+
+	DBG(3, "ep%i ch%i\n", chdat->epnum, chdat->ch);
+
+	reg = musb_readl(tbase, TUSB_DMA_INT_MASK);
+	if (chdat->tx)
+		reg |= (1 << chdat->epnum);
+	else
+		reg |= (1 << (chdat->epnum + 15));
+	musb_writel(tbase, TUSB_DMA_INT_MASK, reg);
+
+	reg = musb_readl(tbase, TUSB_DMA_INT_CLEAR);
+	if (chdat->tx)
+		reg |= (1 << chdat->epnum);
+	else
+		reg |= (1 << (chdat->epnum + 15));
+	musb_writel(tbase, TUSB_DMA_INT_CLEAR, reg);
+
+	channel->status = MUSB_DMA_STATUS_UNKNOWN;
+
+	if (chdat->ch >= 0) {
+		omap_stop_dma(chdat->ch);
+		omap_free_dma(chdat->ch);
+		chdat->ch = -1;
+	}
+
+	if (chdat->dmareq >= 0)
+		tusb_omap_dma_free_dmareq(chdat);
+
+	channel = NULL;
+}
+
+void dma_controller_destroy(struct dma_controller *c)
+{
+	struct tusb_omap_dma	*tusb_dma;
+	int			i;
+
+	tusb_dma = container_of(c, struct tusb_omap_dma, controller);
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel *ch = dma_channel_pool[i];
+		if (ch) {
+			kfree(ch->private_data);
+			kfree(ch);
+		}
+	}
+
+	if (!tusb_dma->multichannel && tusb_dma && tusb_dma->ch >= 0)
+		omap_free_dma(tusb_dma->ch);
+
+	kfree(tusb_dma);
+}
+
+struct dma_controller *__init
+dma_controller_create(struct musb *musb, void __iomem *base)
+{
+	void __iomem		*tbase = musb->ctrl_base;
+	struct tusb_omap_dma	*tusb_dma;
+	int			i;
+
+	/* REVISIT: Get dmareq lines used from board-*.c */
+
+	musb_writel(musb->ctrl_base, TUSB_DMA_INT_MASK, 0x7fffffff);
+	musb_writel(musb->ctrl_base, TUSB_DMA_EP_MAP, 0);
+
+	musb_writel(tbase, TUSB_DMA_REQ_CONF,
+		TUSB_DMA_REQ_CONF_BURST_SIZE(2)
+		| TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f)
+		| TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
+
+	tusb_dma = kzalloc(sizeof(struct tusb_omap_dma), GFP_KERNEL);
+	if (!tusb_dma)
+		goto cleanup;
+
+	tusb_dma->musb = musb;
+	tusb_dma->tbase = musb->ctrl_base;
+
+	tusb_dma->ch = -1;
+	tusb_dma->dmareq = -1;
+	tusb_dma->sync_dev = -1;
+
+	tusb_dma->controller.start = tusb_omap_dma_start;
+	tusb_dma->controller.stop = tusb_omap_dma_stop;
+	tusb_dma->controller.channel_alloc = tusb_omap_dma_allocate;
+	tusb_dma->controller.channel_release = tusb_omap_dma_release;
+	tusb_dma->controller.channel_program = tusb_omap_dma_program;
+	tusb_dma->controller.channel_abort = tusb_omap_dma_abort;
+
+	if (tusb_get_revision(musb) >= TUSB_REV_30)
+		tusb_dma->multichannel = 1;
+
+	for (i = 0; i < MAX_DMAREQ; i++) {
+		struct dma_channel	*ch;
+		struct tusb_omap_dma_ch	*chdat;
+
+		ch = kzalloc(sizeof(struct dma_channel), GFP_KERNEL);
+		if (!ch)
+			goto cleanup;
+
+		dma_channel_pool[i] = ch;
+
+		chdat = kzalloc(sizeof(struct tusb_omap_dma_ch), GFP_KERNEL);
+		if (!chdat)
+			goto cleanup;
+
+		ch->status = MUSB_DMA_STATUS_UNKNOWN;
+		ch->private_data = chdat;
+	}
+
+	return &tusb_dma->controller;
+
+cleanup:
+	dma_controller_destroy(&tusb_dma->controller);
+
+	return NULL;
+}
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 8878c1767fc..70338f4ec91 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -499,9 +499,10 @@ config USB_SERIAL_SAFE_PADDED
 config USB_SERIAL_SIERRAWIRELESS
 	tristate "USB Sierra Wireless Driver"
 	help
-	  Say M here if you want to use a Sierra Wireless device (if
-	  using an PC 5220 or AC580 please use the Airprime driver
-	  instead).
+	  Say M here if you want to use Sierra Wireless devices.
+
+	  Many deviecs have a feature known as TRU-Install, for those devices
+	  to work properly the USB Storage Sierra feature must be enabled.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called sierra.
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 83871725014..984f6eff4c4 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -563,6 +563,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -637,6 +638,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
@@ -646,6 +648,10 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ },					/* Optional parameter entry */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index a577ea44dcf..382265bba96 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -524,7 +524,9 @@
 #define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
 #define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
 #define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
+#define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
 #define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
+#define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
 
 /*
  * Definitions for ID TECH (www.idt-net.com) devices
@@ -815,6 +817,11 @@
 #define OLIMEX_VID			0x15BA
 #define OLIMEX_ARM_USB_OCD_PID		0x0003
 
+/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
+/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
+#define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
+#define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
+
 /* www.elsterelectricity.com Elster Unicom III Optical Probe */
 #define FTDI_ELSTER_UNICOM_PID		0xE700 /* Product Id */
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e4eca95f2b0..e143198aeb0 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -186,6 +186,23 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define BANDRICH_VENDOR_ID			0x1A8D
 #define BANDRICH_PRODUCT_C100_1			0x1002
 #define BANDRICH_PRODUCT_C100_2			0x1003
+#define BANDRICH_PRODUCT_1004			0x1004
+#define BANDRICH_PRODUCT_1005			0x1005
+#define BANDRICH_PRODUCT_1006			0x1006
+#define BANDRICH_PRODUCT_1007			0x1007
+#define BANDRICH_PRODUCT_1008			0x1008
+#define BANDRICH_PRODUCT_1009			0x1009
+#define BANDRICH_PRODUCT_100A			0x100a
+
+#define BANDRICH_PRODUCT_100B			0x100b
+#define BANDRICH_PRODUCT_100C			0x100c
+#define BANDRICH_PRODUCT_100D			0x100d
+#define BANDRICH_PRODUCT_100E			0x100e
+
+#define BANDRICH_PRODUCT_100F			0x100f
+#define BANDRICH_PRODUCT_1010			0x1010
+#define BANDRICH_PRODUCT_1011			0x1011
+#define BANDRICH_PRODUCT_1012			0x1012
 
 #define AMOI_VENDOR_ID			0x1614
 #define AMOI_PRODUCT_9508			0x0800
@@ -197,6 +214,10 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define TELIT_VENDOR_ID				0x1bc7
 #define TELIT_PRODUCT_UC864E			0x1003
 
+/* ZTE PRODUCTS */
+#define ZTE_VENDOR_ID				0x19d2
+#define ZTE_PRODUCT_MF628			0x0015
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -302,12 +323,28 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1005) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1006) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1007) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1008) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1009) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100A) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100B) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100C) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100D) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100E) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100F) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1010) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1011) },
+	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -346,11 +383,7 @@ static struct usb_serial_driver option_1port_device = {
 	.read_int_callback = option_instat_callback,
 };
 
-#ifdef CONFIG_USB_DEBUG
 static int debug;
-#else
-#define debug 0
-#endif
 
 /* per port private data */
 
@@ -954,8 +987,5 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
-#ifdef CONFIG_USB_DEBUG
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug messages");
-#endif
-
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 2c9c446ad62..1ede1441cb1 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -90,7 +90,6 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
 	{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
 	{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
-	{ USB_DEVICE(HL340_VENDOR_ID, HL340_PRODUCT_ID) },
 	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 6ac3bbcf7a2..a3bd039c78e 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -107,10 +107,6 @@
 #define COREGA_VENDOR_ID	0x07aa
 #define COREGA_PRODUCT_ID	0x002a
 
-/* HL HL-340 (ID: 4348:5523) */
-#define HL340_VENDOR_ID		0x4348
-#define HL340_PRODUCT_ID	0x5523
-
 /* Y.C. Cable U.S.A., Inc - USB to RS-232 */
 #define YCCABLE_VENDOR_ID	0x05ad
 #define YCCABLE_PRODUCT_ID	0x0fba
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 2f6f1523ec5..706033753ad 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.2.9c"
+#define DRIVER_VERSION "v.1.2.13a"
 #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
@@ -31,6 +31,7 @@
 #define SWIMS_USB_REQUEST_SetPower	0x00
 #define SWIMS_USB_REQUEST_SetNmea	0x07
 #define SWIMS_USB_REQUEST_SetMode	0x0B
+#define SWIMS_USB_REQUEST_GetSwocInfo	0x0A
 #define SWIMS_SET_MODE_Modem		0x0001
 
 /* per port private data */
@@ -40,18 +41,11 @@
 
 static int debug;
 static int nmea;
-static int truinstall = 1;
-
-enum devicetype {
-	DEVICE_3_PORT =		0,
-	DEVICE_1_PORT =		1,
-	DEVICE_INSTALLER =	2,
-};
 
 static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 {
 	int result;
-	dev_dbg(&udev->dev, "%s", "SET POWER STATE\n");
+	dev_dbg(&udev->dev, "%s", __func__);
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			SWIMS_USB_REQUEST_SetPower,	/* __u8 request      */
 			USB_TYPE_VENDOR,		/* __u8 request type */
@@ -63,25 +57,10 @@ static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 	return result;
 }
 
-static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode)
-{
-	int result;
-	dev_dbg(&udev->dev, "%s", "DEVICE MODE SWITCH\n");
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			SWIMS_USB_REQUEST_SetMode,	/* __u8 request      */
-			USB_TYPE_VENDOR,		/* __u8 request type */
-			eSWocMode,			/* __u16 value       */
-			0x0000,				/* __u16 index       */
-			NULL,				/* void *data        */
-			0,				/* __u16 size 	     */
-			USB_CTRL_SET_TIMEOUT);		/* int timeout       */
-	return result;
-}
-
 static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable)
 {
 	int result;
-	dev_dbg(&udev->dev, "%s", "NMEA Enable sent\n");
+	dev_dbg(&udev->dev, "%s", __func__);
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			SWIMS_USB_REQUEST_SetNmea,	/* __u8 request      */
 			USB_TYPE_VENDOR,		/* __u8 request type */
@@ -97,6 +76,7 @@ static int sierra_calc_num_ports(struct usb_serial *serial)
 {
 	int result;
 	int *num_ports = usb_get_serial_data(serial);
+	dev_dbg(&serial->dev->dev, "%s", __func__);
 
 	result = *num_ports;
 
@@ -110,22 +90,23 @@ static int sierra_calc_num_ports(struct usb_serial *serial)
 
 static int sierra_calc_interface(struct usb_serial *serial)
 {
-		int interface;
-		struct usb_interface *p_interface;
-		struct usb_host_interface *p_host_interface;
+	int interface;
+	struct usb_interface *p_interface;
+	struct usb_host_interface *p_host_interface;
+	dev_dbg(&serial->dev->dev, "%s", __func__);
 
-		/* Get the interface structure pointer from the serial struct */
-		p_interface = serial->interface;
+	/* Get the interface structure pointer from the serial struct */
+	p_interface = serial->interface;
 
-		/* Get a pointer to the host interface structure */
-		p_host_interface = p_interface->cur_altsetting;
+	/* Get a pointer to the host interface structure */
+	p_host_interface = p_interface->cur_altsetting;
 
-		/* read the interface descriptor for this active altsetting
-		 * to find out the interface number we are on
-		*/
-		interface = p_host_interface->desc.bInterfaceNumber;
+	/* read the interface descriptor for this active altsetting
+	 * to find out the interface number we are on
+	*/
+	interface = p_host_interface->desc.bInterfaceNumber;
 
-		return interface;
+	return interface;
 }
 
 static int sierra_probe(struct usb_serial *serial,
@@ -135,43 +116,40 @@ static int sierra_probe(struct usb_serial *serial,
 	struct usb_device *udev;
 	int *num_ports;
 	u8 ifnum;
+	u8 numendpoints;
+
+	dev_dbg(&serial->dev->dev, "%s", __func__);
 
 	num_ports = kmalloc(sizeof(*num_ports), GFP_KERNEL);
 	if (!num_ports)
 		return -ENOMEM;
 
 	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints;
 	udev = serial->dev;
 
-		/* Figure out the interface number from the serial structure */
-		ifnum = sierra_calc_interface(serial);
-
-		/*
-		 * If this interface supports more than 1 alternate
-		 * select the 2nd one
-		 */
-		if (serial->interface->num_altsetting == 2) {
-			dev_dbg(&udev->dev,
-				"Selecting alt setting for interface %d\n",
-				ifnum);
+	/* Figure out the interface number from the serial structure */
+	ifnum = sierra_calc_interface(serial);
 
-			/* We know the alternate setting is 1 for the MC8785 */
-			usb_set_interface(udev, ifnum, 1);
-		}
+	/*
+	 * If this interface supports more than 1 alternate
+	 * select the 2nd one
+	 */
+	if (serial->interface->num_altsetting == 2) {
+		dev_dbg(&udev->dev, "Selecting alt setting for interface %d\n",
+			ifnum);
+		/* We know the alternate setting is 1 for the MC8785 */
+		usb_set_interface(udev, ifnum, 1);
+	}
 
-	/* Check if in installer mode */
-	if (truinstall && id->driver_info == DEVICE_INSTALLER) {
-		dev_dbg(&udev->dev, "%s", "FOUND TRU-INSTALL DEVICE(SW)\n");
-		result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
-		/* Don't bind to the device when in installer mode */
-		kfree(num_ports);
-		return -EIO;
-	} else if (id->driver_info == DEVICE_1_PORT)
-		*num_ports = 1;
-	else if (ifnum == 0x99)
+	/* Dummy interface present on some SKUs should be ignored */
+	if (ifnum == 0x99)
 		*num_ports = 0;
+	else if (numendpoints <= 3)
+		*num_ports = 1;
 	else
-		*num_ports = 3;
+		*num_ports = (numendpoints-1)/2;
+
 	/*
 	 * save off our num_ports info so that we can use it in the
 	 * calc_num_ports callback
@@ -187,40 +165,50 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x0218) },	/* Sierra Wireless MC5720 */
 	{ USB_DEVICE(0x0f30, 0x1b1d) },	/* Sierra Wireless MC5720 */
 	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
+	{ USB_DEVICE(0x1199, 0x0024) },	/* Sierra Wireless MC5727 */
 	{ USB_DEVICE(0x1199, 0x0220) },	/* Sierra Wireless MC5725 */
 	{ USB_DEVICE(0x1199, 0x0019) },	/* Sierra Wireless AirCard 595 */
 	{ USB_DEVICE(0x1199, 0x0021) },	/* Sierra Wireless AirCard 597E */
 	{ USB_DEVICE(0x1199, 0x0120) },	/* Sierra Wireless USB Dongle 595U */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) }, /* Sierra Wireless C597 */
+	 /* Sierra Wireless C597 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
+	 /* Sierra Wireless Device */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
+	{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
 
 	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
 	{ USB_DEVICE(0x1199, 0x6804) },	/* Sierra Wireless MC8755 */
 	{ USB_DEVICE(0x1199, 0x6803) },	/* Sierra Wireless MC8765 */
 	{ USB_DEVICE(0x1199, 0x6812) },	/* Sierra Wireless MC8775 & AC 875U */
-	{ USB_DEVICE(0x1199, 0x6813) },	/* Sierra Wireless MC8775 (Thinkpad internal) */
+	{ USB_DEVICE(0x1199, 0x6813) },	/* Sierra Wireless MC8775 (Lenovo) */
 	{ USB_DEVICE(0x1199, 0x6815) },	/* Sierra Wireless MC8775 */
 	{ USB_DEVICE(0x03f0, 0x1e1d) },	/* HP hs2300 a.k.a MC8775 */
 	{ USB_DEVICE(0x1199, 0x6820) },	/* Sierra Wireless AirCard 875 */
 	{ USB_DEVICE(0x1199, 0x6821) },	/* Sierra Wireless AirCard 875U */
-	{ USB_DEVICE(0x1199, 0x6832) },	/* Sierra Wireless MC8780*/
-	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781*/
-	{ USB_DEVICE(0x1199, 0x683B), .driver_info = DEVICE_1_PORT },	/* Sierra Wireless MC8785 Composite*/
+	{ USB_DEVICE(0x1199, 0x6832) },	/* Sierra Wireless MC8780 */
+	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781 */
+	{ USB_DEVICE(0x1199, 0x683B) },	/* Sierra Wireless MC8785 Composite */
+	{ USB_DEVICE(0x1199, 0x683C) },	/* Sierra Wireless MC8790 */
+	{ USB_DEVICE(0x1199, 0x683D) },	/* Sierra Wireless MC8790 */
+	{ USB_DEVICE(0x1199, 0x683E) },	/* Sierra Wireless MC8790 */
 	{ USB_DEVICE(0x1199, 0x6850) },	/* Sierra Wireless AirCard 880 */
 	{ USB_DEVICE(0x1199, 0x6851) },	/* Sierra Wireless AirCard 881 */
 	{ USB_DEVICE(0x1199, 0x6852) },	/* Sierra Wireless AirCard 880 E */
 	{ USB_DEVICE(0x1199, 0x6853) },	/* Sierra Wireless AirCard 881 E */
 	{ USB_DEVICE(0x1199, 0x6855) },	/* Sierra Wireless AirCard 880 U */
 	{ USB_DEVICE(0x1199, 0x6856) },	/* Sierra Wireless AirCard 881 U */
-	{ USB_DEVICE(0x1199, 0x6859), .driver_info = DEVICE_1_PORT },	/* Sierra Wireless AirCard 885 E */
-	{ USB_DEVICE(0x1199, 0x685A), .driver_info = DEVICE_1_PORT },	/* Sierra Wireless AirCard 885 E */
-
-	{ USB_DEVICE(0x1199, 0x6468) }, /* Sierra Wireless MP3G - EVDO */
-	{ USB_DEVICE(0x1199, 0x6469) }, /* Sierra Wireless MP3G - UMTS/HSPA */
-
-	{ USB_DEVICE(0x1199, 0x0112), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless AirCard 580 */
-	{ USB_DEVICE(0x0F3D, 0x0112), .driver_info = DEVICE_1_PORT }, /* Airprime/Sierra PC 5220 */
+	{ USB_DEVICE(0x1199, 0x6859) },	/* Sierra Wireless AirCard 885 E */
+	{ USB_DEVICE(0x1199, 0x685A) },	/* Sierra Wireless AirCard 885 E */
+	/* Sierra Wireless C885 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
+	/* Sierra Wireless Device */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
+	/* Sierra Wireless Device */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
+
+	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
+	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
 
-	{ USB_DEVICE(0x1199, 0x0FFF), .driver_info = DEVICE_INSTALLER},
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -268,13 +256,19 @@ static int sierra_send_setup(struct tty_struct *tty,
 		if (portdata->rts_state)
 			val |= 0x02;
 
-		/* Determine which port is targeted */
-		if (port->bulk_out_endpointAddress == 2)
-			interface = 0;
-		else if (port->bulk_out_endpointAddress == 4)
-			interface = 1;
-		else if (port->bulk_out_endpointAddress == 5)
-			interface = 2;
+		/* If composite device then properly report interface */
+		if (serial->num_ports == 1)
+			interface = sierra_calc_interface(serial);
+
+		/* Otherwise the need to do non-composite mapping */
+		else {
+			if (port->bulk_out_endpointAddress == 2)
+				interface = 0;
+			else if (port->bulk_out_endpointAddress == 4)
+				interface = 1;
+			else if (port->bulk_out_endpointAddress == 5)
+				interface = 2;
+		}
 
 		return usb_control_msg(serial->dev,
 				usb_rcvctrlpipe(serial->dev, 0),
@@ -713,7 +707,7 @@ static void sierra_shutdown(struct usb_serial *serial)
 static struct usb_serial_driver sierra_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
-		.name =		"sierra1",
+		.name =		"sierra",
 	},
 	.description       = "Sierra USB modem",
 	.id_table          = id_table,
@@ -769,14 +763,8 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
-module_param(truinstall, bool, 0);
-MODULE_PARM_DESC(truinstall, "TRU-Install support");
-
-module_param(nmea, bool, 0);
+module_param(nmea, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(nmea, "NMEA streaming");
 
-#ifdef CONFIG_USB_DEBUG
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug messages");
-#endif
-
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 8c2d531eede..b157c48e8b7 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -122,9 +122,6 @@ static void return_serial(struct usb_serial *serial)
 
 	dbg("%s", __func__);
 
-	if (serial == NULL)
-		return;
-
 	for (i = 0; i < serial->num_ports; ++i)
 		serial_table[serial->minor + i] = NULL;
 }
@@ -142,7 +139,8 @@ static void destroy_serial(struct kref *kref)
 	serial->type->shutdown(serial);
 
 	/* return the minor range that this device had */
-	return_serial(serial);
+	if (serial->minor != SERIAL_TTY_NO_MINOR)
+		return_serial(serial);
 
 	for (i = 0; i < serial->num_ports; ++i)
 		serial->port[i]->port.count = 0;
@@ -575,6 +573,7 @@ static struct usb_serial *create_serial(struct usb_device *dev,
 	serial->interface = interface;
 	kref_init(&serial->kref);
 	mutex_init(&serial->disc_mutex);
+	serial->minor = SERIAL_TTY_NO_MINOR;
 
 	return serial;
 }
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 3d9249632ae..c76034672c1 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -146,6 +146,18 @@ config USB_STORAGE_KARMA
 	  on the resulting scsi device node returns the Karma to normal
 	  operation.
 
+config USB_STORAGE_SIERRA
+	bool "Sierra Wireless TRU-Install Feature Support"
+	depends on USB_STORAGE
+	help
+	  Say Y here to include additional code to support Sierra Wireless
+	  products with the TRU-Install feature (e.g., AC597E, AC881U).
+
+	  This code switches the Sierra Wireless device from being in
+	  Mass Storage mode to Modem mode. It also has the ability to
+	  support host software upgrades should full Linux support be added
+	  to TRU-Install.
+
 config USB_STORAGE_CYPRESS_ATACB
 	bool "SAT emulation on Cypress USB/ATA Bridge with ATACB"
 	depends on USB_STORAGE
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 4c596c766c5..bc3415b475c 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -21,6 +21,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= jumpshot.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= alauda.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH)	+= onetouch.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA)	+= karma.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_SIERRA)	+= sierra_ms.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
 
 usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
new file mode 100644
index 00000000000..4359a2cb42d
--- /dev/null
+++ b/drivers/usb/storage/sierra_ms.c
@@ -0,0 +1,207 @@
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <linux/usb.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "scsiglue.h"
+#include "sierra_ms.h"
+#include "debug.h"
+
+#define SWIMS_USB_REQUEST_SetSwocMode	0x0B
+#define SWIMS_USB_REQUEST_GetSwocInfo	0x0A
+#define SWIMS_USB_INDEX_SetMode		0x0000
+#define SWIMS_SET_MODE_Modem		0x0001
+
+#define TRU_NORMAL 			0x01
+#define TRU_FORCE_MS 			0x02
+#define TRU_FORCE_MODEM 		0x03
+
+static unsigned int swi_tru_install = 1;
+module_param(swi_tru_install, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(swi_tru_install, "TRU-Install mode (1=Full Logic (def),"
+		 " 2=Force CD-Rom, 3=Force Modem)");
+
+struct swoc_info {
+	__u8 rev;
+	__u8 reserved[8];
+	__u16 LinuxSKU;
+	__u16 LinuxVer;
+	__u8 reserved2[47];
+} __attribute__((__packed__));
+
+static bool containsFullLinuxPackage(struct swoc_info *swocInfo)
+{
+	if ((swocInfo->LinuxSKU >= 0x2100 && swocInfo->LinuxSKU <= 0x2FFF) ||
+	   (swocInfo->LinuxSKU >= 0x7100 && swocInfo->LinuxSKU <= 0x7FFF))
+		return true;
+	else
+		return false;
+}
+
+static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode)
+{
+	int result;
+	US_DEBUGP("SWIMS: %s", "DEVICE MODE SWITCH\n");
+	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			SWIMS_USB_REQUEST_SetSwocMode,	/* __u8 request      */
+			USB_TYPE_VENDOR | USB_DIR_OUT,	/* __u8 request type */
+			eSWocMode,			/* __u16 value       */
+			0x0000,				/* __u16 index       */
+			NULL,				/* void *data        */
+			0,				/* __u16 size 	     */
+			USB_CTRL_SET_TIMEOUT);		/* int timeout       */
+	return result;
+}
+
+
+static int sierra_get_swoc_info(struct usb_device *udev,
+				struct swoc_info *swocInfo)
+{
+	int result;
+
+	US_DEBUGP("SWIMS: Attempting to get TRU-Install info.\n");
+
+	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			SWIMS_USB_REQUEST_GetSwocInfo,	/* __u8 request      */
+			USB_TYPE_VENDOR | USB_DIR_IN,	/* __u8 request type */
+			0,				/* __u16 value       */
+			0,				/* __u16 index       */
+			(void *) swocInfo,		/* void *data        */
+			sizeof(struct swoc_info),	/* __u16 size 	     */
+			USB_CTRL_SET_TIMEOUT);		/* int timeout 	     */
+
+	swocInfo->LinuxSKU = le16_to_cpu(swocInfo->LinuxSKU);
+	swocInfo->LinuxVer = le16_to_cpu(swocInfo->LinuxVer);
+	return result;
+}
+
+static void debug_swoc(struct swoc_info *swocInfo)
+{
+	US_DEBUGP("SWIMS: SWoC Rev: %02d \n", swocInfo->rev);
+	US_DEBUGP("SWIMS: Linux SKU: %04X \n", swocInfo->LinuxSKU);
+	US_DEBUGP("SWIMS: Linux Version: %04X \n", swocInfo->LinuxVer);
+}
+
+
+static ssize_t show_truinst(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct swoc_info *swocInfo;
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usb_device *udev = interface_to_usbdev(intf);
+	int result;
+	if (swi_tru_install == TRU_FORCE_MS) {
+		result = snprintf(buf, PAGE_SIZE, "Forced Mass Storage\n");
+	} else {
+		swocInfo = kmalloc(sizeof(struct swoc_info), GFP_KERNEL);
+		if (!swocInfo) {
+			US_DEBUGP("SWIMS: Allocation failure\n");
+			snprintf(buf, PAGE_SIZE, "Error\n");
+			return -ENOMEM;
+		}
+		result = sierra_get_swoc_info(udev, swocInfo);
+		if (result < 0) {
+			US_DEBUGP("SWIMS: failed SWoC query\n");
+			kfree(swocInfo);
+			snprintf(buf, PAGE_SIZE, "Error\n");
+			return -EIO;
+		}
+		debug_swoc(swocInfo);
+		result = snprintf(buf, PAGE_SIZE,
+			"REV=%02d SKU=%04X VER=%04X\n",
+			swocInfo->rev,
+			swocInfo->LinuxSKU,
+			swocInfo->LinuxVer);
+		kfree(swocInfo);
+	}
+	return result;
+}
+static DEVICE_ATTR(truinst, S_IWUGO | S_IRUGO, show_truinst, NULL);
+
+int sierra_ms_init(struct us_data *us)
+{
+	int result, retries;
+	signed long delay_t;
+	struct swoc_info *swocInfo;
+	struct usb_device *udev;
+	struct Scsi_Host *sh;
+	struct scsi_device *sd;
+
+	delay_t = 2;
+	retries = 3;
+	result = 0;
+	udev = us->pusb_dev;
+
+	sh = us_to_host(us);
+	sd = scsi_get_host_dev(sh);
+
+	US_DEBUGP("SWIMS: sierra_ms_init called\n");
+
+	/* Force Modem mode */
+	if (swi_tru_install == TRU_FORCE_MODEM) {
+		US_DEBUGP("SWIMS: %s", "Forcing Modem Mode\n");
+		result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem);
+		if (result < 0)
+			US_DEBUGP("SWIMS: Failed to switch to modem mode.\n");
+		return -EIO;
+	}
+	/* Force Mass Storage mode (keep CD-Rom) */
+	else if (swi_tru_install == TRU_FORCE_MS) {
+		US_DEBUGP("SWIMS: %s", "Forcing Mass Storage Mode\n");
+		goto complete;
+	}
+	/* Normal TRU-Install Logic */
+	else {
+		US_DEBUGP("SWIMS: %s", "Normal SWoC Logic\n");
+
+		swocInfo = kmalloc(sizeof(struct swoc_info),
+				GFP_KERNEL);
+		if (!swocInfo) {
+			US_DEBUGP("SWIMS: %s", "Allocation failure\n");
+			return -ENOMEM;
+		}
+
+		retries = 3;
+		do {
+			retries--;
+			result = sierra_get_swoc_info(udev, swocInfo);
+			if (result < 0) {
+				US_DEBUGP("SWIMS: %s", "Failed SWoC query\n");
+				schedule_timeout_uninterruptible(2*HZ);
+			}
+		} while (retries && result < 0);
+
+		if (result < 0) {
+			US_DEBUGP("SWIMS: %s",
+				  "Completely failed SWoC query\n");
+			kfree(swocInfo);
+			return -EIO;
+		}
+
+		debug_swoc(swocInfo);
+
+		/* If there is not Linux software on the TRU-Install device
+		 * then switch to modem mode
+		 */
+		if (!containsFullLinuxPackage(swocInfo)) {
+			US_DEBUGP("SWIMS: %s",
+				"Switching to Modem Mode\n");
+			result = sierra_set_ms_mode(udev,
+				SWIMS_SET_MODE_Modem);
+			if (result < 0)
+				US_DEBUGP("SWIMS: Failed to switch modem\n");
+			kfree(swocInfo);
+			return -EIO;
+		}
+		kfree(swocInfo);
+	}
+complete:
+	result = device_create_file(&us->pusb_intf->dev, &dev_attr_truinst);
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
diff --git a/drivers/usb/storage/sierra_ms.h b/drivers/usb/storage/sierra_ms.h
new file mode 100644
index 00000000000..bb48634ac1f
--- /dev/null
+++ b/drivers/usb/storage/sierra_ms.h
@@ -0,0 +1,4 @@
+#ifndef _SIERRA_MS_H_
+#define _SIERRA_MS_H_
+extern int sierra_ms_init(struct us_data *us);
+#endif
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fcbbfdb7b2b..3523a0bfa0f 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1032,8 +1032,21 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 
 	/* try to compute the actual residue, based on how much data
 	 * was really transferred and what the device tells us */
-	if (residue) {
-		if (!(us->fflags & US_FL_IGNORE_RESIDUE)) {
+	if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) {
+
+		/* Heuristically detect devices that generate bogus residues
+		 * by seeing what happens with INQUIRY and READ CAPACITY
+		 * commands.
+		 */
+		if (bcs->Status == US_BULK_STAT_OK &&
+				scsi_get_resid(srb) == 0 &&
+					((srb->cmnd[0] == INQUIRY &&
+						transfer_length == 36) ||
+					(srb->cmnd[0] == READ_CAPACITY &&
+						transfer_length == 8))) {
+			us->fflags |= US_FL_IGNORE_RESIDUE;
+
+		} else {
 			residue = min(residue, transfer_length);
 			scsi_set_resid(srb, max(scsi_get_resid(srb),
 			                                       (int) residue));
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 7ae69f55aa9..ba412e68d47 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -225,6 +225,13 @@ UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
+/* Reported by Cedric Godin <cedric@belbone.be> */
+UNUSUAL_DEV(  0x0421, 0x04b9, 0x0551, 0x0551,
+		"Nokia",
+		"5300",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
 UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
 		"SMSC",
@@ -356,14 +363,14 @@ UNUSUAL_DEV(  0x04b0, 0x040f, 0x0100, 0x0200,
 		US_FL_FIX_CAPACITY),
 
 /* Reported by Emil Larsson <emil@swip.net> */
-UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0110,
+UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0111,
 		"NIKON",
 		"NIKON DSC D80",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
 /* Reported by Ortwin Glueck <odi@odi.ch> */
-UNUSUAL_DEV(  0x04b0, 0x0413, 0x0110, 0x0110,
+UNUSUAL_DEV(  0x04b0, 0x0413, 0x0110, 0x0111,
 		"NIKON",
 		"NIKON DSC D40",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
@@ -1185,6 +1192,13 @@ UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
+/* Reported by Rauch Wolke <rauchwolke@gmx.net> */
+UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
+		"Simple Tech/Datafab",
+		"CF+SM Reader",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
  * to the USB storage specification in two ways:
  * - They tell us they are using transport protocol CBI. In reality they
@@ -1562,6 +1576,7 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		0),
 
+#ifdef CONFIG_USB_STORAGE_SIERRA
 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
  * Entry is needed for the initializer function override,
  * which instructs the device to load as a modem
@@ -1570,8 +1585,9 @@ UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
 UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
 		"Sierra Wireless",
 		"USB MMC Storage",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_IGNORE_DEVICE),
+		US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
+		0),
+#endif
 
 /* Reported by Jaco Kroon <jaco@kroon.co.za>
  * The usb-storage module found on the Digitech GNX4 (and supposedly other
@@ -1743,6 +1759,15 @@ UNUSUAL_DEV(  0x22b8, 0x4810, 0x0001, 0x0002,
 		US_FL_FIX_CAPACITY),
 
 /*
+ * Patch by Jost Diederichs <jost@qdusa.com>
+ */
+UNUSUAL_DEV(0x22b8, 0x6410, 0x0001, 0x9999,
+		"Motorola Inc.",
+		"Motorola Phone (RAZRV3xx)",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
+/*
  * Patch by Constantin Baranov <const@tltsu.ru>
  * Report by Andreas Koenecke.
  * Motorola ROKR Z6.
@@ -1767,6 +1792,13 @@ UNUSUAL_DEV(  0x2770, 0x915d, 0x0010, 0x0010,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
+UNUSUAL_DEV(  0x4102, 0x1020, 0x0100,  0x0100,
+		"iRiver",
+		"MP3 T10",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /*
  * David Härdeman <david@2gen.com>
  * The key makes the SCSI stack print confusing (but harmless) messages
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index bfea851be98..73679aa506d 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -102,6 +102,9 @@
 #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
 #include "cypress_atacb.h"
 #endif
+#ifdef CONFIG_USB_STORAGE_SIERRA
+#include "sierra_ms.h"
+#endif
 
 /* Some informational data */
 MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index e7018a2f56a..9c5925927ec 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -39,7 +39,9 @@
 #endif
 
 #if defined(CONFIG_ARCH_AT91)
-#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
+#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
+					 | FBINFO_PARTIAL_PAN_OK \
+					 | FBINFO_HWACCEL_YPAN)
 
 static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
 					struct fb_var_screeninfo *var)
@@ -177,7 +179,7 @@ static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
 	.type		= FB_TYPE_PACKED_PIXELS,
 	.visual		= FB_VISUAL_TRUECOLOR,
 	.xpanstep	= 0,
-	.ypanstep	= 0,
+	.ypanstep	= 1,
 	.ywrapstep	= 0,
 	.accel		= FB_ACCEL_NONE,
 };
@@ -240,9 +242,11 @@ static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
 {
 	struct fb_info *info = sinfo->info;
 	struct fb_var_screeninfo *var = &info->var;
+	unsigned int smem_len;
 
-	info->fix.smem_len = (var->xres_virtual * var->yres_virtual
-			    * ((var->bits_per_pixel + 7) / 8));
+	smem_len = (var->xres_virtual * var->yres_virtual
+		    * ((var->bits_per_pixel + 7) / 8));
+	info->fix.smem_len = max(smem_len, sinfo->smem_len);
 
 	info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
 					(dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
@@ -794,6 +798,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 		sinfo->default_monspecs = pdata_sinfo->default_monspecs;
 		sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
 		sinfo->guard_time = pdata_sinfo->guard_time;
+		sinfo->smem_len = pdata_sinfo->smem_len;
 		sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
 		sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
 	} else {
diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c
index 4d13f68436e..aa95f835024 100644
--- a/drivers/video/aty/radeon_accel.c
+++ b/drivers/video/aty/radeon_accel.c
@@ -55,6 +55,10 @@ static void radeonfb_prim_fillrect(struct radeonfb_info *rinfo,
 	OUTREG(DP_WRITE_MSK, 0xffffffff);
 	OUTREG(DP_CNTL, (DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM));
 
+	radeon_fifo_wait(2);
+	OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
+	OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
+
 	radeon_fifo_wait(2);  
 	OUTREG(DST_Y_X, (region->dy << 16) | region->dx);
 	OUTREG(DST_WIDTH_HEIGHT, (region->width << 16) | region->height);
@@ -116,6 +120,10 @@ static void radeonfb_prim_copyarea(struct radeonfb_info *rinfo,
 	OUTREG(DP_CNTL, (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0)
 			| (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
 
+	radeon_fifo_wait(2);
+	OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
+	OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
+
 	radeon_fifo_wait(3);
 	OUTREG(SRC_Y_X, (sy << 16) | sx);
 	OUTREG(DST_Y_X, (dy << 16) | dx);
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 33859934a8e..c6299e8a041 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -2518,7 +2518,7 @@ static int fbcon_do_set_font(struct vc_data *vc, int w, int h,
 			c = vc->vc_video_erase_char;
 			vc->vc_video_erase_char =
 			    ((c & 0xfe00) >> 1) | (c & 0xff);
-			c = vc->vc_def_color;
+			c = vc->vc_scrl_erase_char;
 			vc->vc_scrl_erase_char =
 			    ((c & 0xFE00) >> 1) | (c & 0xFF);
 			vc->vc_attr >>= 1;
@@ -2551,7 +2551,7 @@ static int fbcon_do_set_font(struct vc_data *vc, int w, int h,
 			if (vc->vc_can_do_color) {
 				vc->vc_video_erase_char =
 				    ((c & 0xff00) << 1) | (c & 0xff);
-				c = vc->vc_def_color;
+				c = vc->vc_scrl_erase_char;
 				vc->vc_scrl_erase_char =
 				    ((c & 0xFF00) << 1) | (c & 0xFF);
 				vc->vc_attr <<= 1;
diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h
index de1b1365279..a6e38e9ea73 100644
--- a/drivers/video/console/fbcon.h
+++ b/drivers/video/console/fbcon.h
@@ -92,7 +92,7 @@ struct fbcon_ops {
 #define attr_fgcol(fgshift,s)    \
 	(((s) >> (fgshift)) & 0x0f)
 #define attr_bgcol(bgshift,s)    \
-	(((s) >> (bgshift)) & 0x07)
+	(((s) >> (bgshift)) & 0x0f)
 
 /* Monochrome */
 #define attr_bold(s) \
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index bd320a2bfb7..fb51197d1c9 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -479,6 +479,10 @@ static void adjust_aoi_size_position(struct fb_var_screeninfo *var,
 	base_plane_width = machine_data->fsl_diu_info[0]->var.xres;
 	base_plane_height = machine_data->fsl_diu_info[0]->var.yres;
 
+	if (mfbi->x_aoi_d < 0)
+		mfbi->x_aoi_d = 0;
+	if (mfbi->y_aoi_d < 0)
+		mfbi->y_aoi_d = 0;
 	switch (index) {
 	case 0:
 		if (mfbi->x_aoi_d != 0)
@@ -778,6 +782,22 @@ static void unmap_video_memory(struct fb_info *info)
 }
 
 /*
+ * Using the fb_var_screeninfo in fb_info we set the aoi of this
+ * particular framebuffer. It is a light version of fsl_diu_set_par.
+ */
+static int fsl_diu_set_aoi(struct fb_info *info)
+{
+	struct fb_var_screeninfo *var = &info->var;
+	struct mfb_info *mfbi = info->par;
+	struct diu_ad *ad = mfbi->ad;
+
+	/* AOI should not be greater than display size */
+	ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
+	ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
+	return 0;
+}
+
+/*
  * Using the fb_var_screeninfo in fb_info we set the resolution of this
  * particular framebuffer. This function alters the fb_fix_screeninfo stored
  * in fb_info. It does not alter var in fb_info since we are using that
@@ -817,11 +837,11 @@ static int fsl_diu_set_par(struct fb_info *info)
 		diu_ops.get_pixel_format(var->bits_per_pixel,
 					 machine_data->monitor_port);
 	ad->addr    = cpu_to_le32(info->fix.smem_start);
-	ad->src_size_g_alpha = cpu_to_le32((var->yres << 12) |
-				var->xres) | mfbi->g_alpha;
-	/* fix me. AOI should not be greater than display size */
+	ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
+				var->xres_virtual) | mfbi->g_alpha;
+	/* AOI should not be greater than display size */
 	ad->aoi_size 	= cpu_to_le32((var->yres << 16) | var->xres);
-	ad->offset_xyi = 0;
+	ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
 	ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
 
 	/* Disable chroma keying function */
@@ -921,6 +941,8 @@ static int fsl_diu_pan_display(struct fb_var_screeninfo *var,
 	else
 		info->var.vmode &= ~FB_VMODE_YWRAP;
 
+	fsl_diu_set_aoi(info);
+
 	return 0;
 }
 
@@ -989,7 +1011,7 @@ static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
 		pr_debug("set AOI display offset of index %d to (%d,%d)\n",
 				 mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
 		fsl_diu_check_var(&info->var, info);
-		fsl_diu_set_par(info);
+		fsl_diu_set_aoi(info);
 		break;
 	case MFB_GET_AOID:
 		aoi_d.x_aoi_d = mfbi->x_aoi_d;
diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/matrox/i2c-matroxfb.c
index 75ee5a12e54..c14e3e2212b 100644
--- a/drivers/video/matrox/i2c-matroxfb.c
+++ b/drivers/video/matrox/i2c-matroxfb.c
@@ -87,13 +87,7 @@ static int matroxfb_gpio_getscl(void* data) {
 	return (matroxfb_read_gpio(b->minfo) & b->mask.clock) ? 1 : 0;
 }
 
-static struct i2c_adapter matrox_i2c_adapter_template =
-{
-	.owner =	THIS_MODULE,
-	.id =		I2C_HW_B_G400,
-};
-
-static struct i2c_algo_bit_data matrox_i2c_algo_template =
+static const struct i2c_algo_bit_data matrox_i2c_algo_template =
 {
 	.setsda		= matroxfb_gpio_setsda,
 	.setscl		= matroxfb_gpio_setscl,
@@ -112,7 +106,7 @@ static int i2c_bus_reg(struct i2c_bit_adapter* b, struct matrox_fb_info* minfo,
 	b->minfo = minfo;
 	b->mask.data = data;
 	b->mask.clock = clock;
-	b->adapter = matrox_i2c_adapter_template;
+	b->adapter.owner = THIS_MODULE;
 	snprintf(b->adapter.name, sizeof(b->adapter.name), name,
 		minfo->fbcon.node);
 	i2c_set_adapdata(&b->adapter, b);
@@ -187,6 +181,17 @@ static void* i2c_matroxfb_probe(struct matrox_fb_info* minfo) {
 				  MAT_DATA, MAT_CLK, "MAVEN:fb%u", 0);
 		if (err)
 			printk(KERN_INFO "i2c-matroxfb: Could not register Maven i2c bus. Continuing anyway.\n");
+		else {
+			struct i2c_board_info maven_info = {
+				I2C_BOARD_INFO("maven", 0x1b),
+			};
+			unsigned short const addr_list[2] = {
+				0x1b, I2C_CLIENT_END
+			};
+
+			i2c_new_probed_device(&m2info->maven.adapter,
+					      &maven_info, addr_list);
+		}
 	}
 	return m2info;
 fail_ddc1:;
diff --git a/drivers/video/matrox/matroxfb_maven.c b/drivers/video/matrox/matroxfb_maven.c
index 89da27bd5c4..042408a8c63 100644
--- a/drivers/video/matrox/matroxfb_maven.c
+++ b/drivers/video/matrox/matroxfb_maven.c
@@ -19,8 +19,6 @@
 #include <linux/matroxfb.h>
 #include <asm/div64.h>
 
-#define MAVEN_I2CID	(0x1B)
-
 #define MGATVO_B	1
 #define MGATVO_C	2
 
@@ -128,7 +126,7 @@ static int get_ctrl_id(__u32 v4l2_id) {
 
 struct maven_data {
 	struct matrox_fb_info*		primary_head;
-	struct i2c_client		client;
+	struct i2c_client		*client;
 	int				version;
 };
 
@@ -974,7 +972,7 @@ static inline int maven_compute_timming(struct maven_data* md,
 
 static int maven_program_timming(struct maven_data* md,
 		const struct mavenregs* m) {
-	struct i2c_client* c = &md->client;
+	struct i2c_client *c = md->client;
 
 	if (m->mode == MATROXFB_OUTPUT_MODE_MONITOR) {
 		LR(0x80);
@@ -1011,7 +1009,7 @@ static int maven_program_timming(struct maven_data* md,
 }
 
 static inline int maven_resync(struct maven_data* md) {
-	struct i2c_client* c = &md->client;
+	struct i2c_client *c = md->client;
 	maven_set_reg(c, 0x95, 0x20);	/* start whole thing */
 	return 0;
 }
@@ -1069,48 +1067,48 @@ static int maven_set_control (struct maven_data* md,
 		  maven_compute_bwlevel(md, &blacklevel, &whitelevel);
 		  blacklevel = (blacklevel >> 2) | ((blacklevel & 3) << 8);
 		  whitelevel = (whitelevel >> 2) | ((whitelevel & 3) << 8);
-		  maven_set_reg_pair(&md->client, 0x0e, blacklevel);
-		  maven_set_reg_pair(&md->client, 0x1e, whitelevel);
+		  maven_set_reg_pair(md->client, 0x0e, blacklevel);
+		  maven_set_reg_pair(md->client, 0x1e, whitelevel);
 		}
 		break;
 		case V4L2_CID_SATURATION:
 		{
-		  maven_set_reg(&md->client, 0x20, p->value);
-		  maven_set_reg(&md->client, 0x22, p->value);
+		  maven_set_reg(md->client, 0x20, p->value);
+		  maven_set_reg(md->client, 0x22, p->value);
 		}
 		break;
 		case V4L2_CID_HUE:
 		{
-		  maven_set_reg(&md->client, 0x25, p->value);
+		  maven_set_reg(md->client, 0x25, p->value);
 		}
 		break;
 		case V4L2_CID_GAMMA:
 		{
 		  const struct maven_gamma* g;
 		  g = maven_compute_gamma(md);
-		  maven_set_reg(&md->client, 0x83, g->reg83);
-		  maven_set_reg(&md->client, 0x84, g->reg84);
-		  maven_set_reg(&md->client, 0x85, g->reg85);
-		  maven_set_reg(&md->client, 0x86, g->reg86);
-		  maven_set_reg(&md->client, 0x87, g->reg87);
-		  maven_set_reg(&md->client, 0x88, g->reg88);
-		  maven_set_reg(&md->client, 0x89, g->reg89);
-		  maven_set_reg(&md->client, 0x8a, g->reg8a);
-		  maven_set_reg(&md->client, 0x8b, g->reg8b);
+		  maven_set_reg(md->client, 0x83, g->reg83);
+		  maven_set_reg(md->client, 0x84, g->reg84);
+		  maven_set_reg(md->client, 0x85, g->reg85);
+		  maven_set_reg(md->client, 0x86, g->reg86);
+		  maven_set_reg(md->client, 0x87, g->reg87);
+		  maven_set_reg(md->client, 0x88, g->reg88);
+		  maven_set_reg(md->client, 0x89, g->reg89);
+		  maven_set_reg(md->client, 0x8a, g->reg8a);
+		  maven_set_reg(md->client, 0x8b, g->reg8b);
 		}
 		break;
 		case MATROXFB_CID_TESTOUT:
 		{
 			unsigned char val 
-			  = maven_get_reg(&md->client,0x8d);
+			  = maven_get_reg(md->client, 0x8d);
 			if (p->value) val |= 0x10;
 			else          val &= ~0x10;
-			maven_set_reg(&md->client, 0x8d, val);
+			maven_set_reg(md->client, 0x8d, val);
 		}
 		break;
 		case MATROXFB_CID_DEFLICKER:
 		{
-		  maven_set_reg(&md->client, 0x93, maven_compute_deflicker(md));
+		  maven_set_reg(md->client, 0x93, maven_compute_deflicker(md));
 		}
 		break;
 	}
@@ -1189,6 +1187,7 @@ static int maven_init_client(struct i2c_client* clnt) {
 	MINFO_FROM(container_of(clnt->adapter, struct i2c_bit_adapter, adapter)->minfo);
 
 	md->primary_head = MINFO;
+	md->client = clnt;
 	down_write(&ACCESS_FBINFO(altout.lock));
 	ACCESS_FBINFO(outputs[1]).output = &maven_altout;
 	ACCESS_FBINFO(outputs[1]).src = ACCESS_FBINFO(outputs[1]).default_src;
@@ -1232,14 +1231,11 @@ static int maven_shutdown_client(struct i2c_client* clnt) {
 	return 0;
 }
 
-static const unsigned short normal_i2c[] = { MAVEN_I2CID, I2C_CLIENT_END };
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver maven_driver;
-
-static int maven_detect_client(struct i2c_adapter* adapter, int address, int kind) {
-	int err = 0;
-	struct i2c_client* new_client;
+static int maven_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	int err = -ENODEV;
 	struct maven_data* data;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_WORD_DATA |
@@ -1250,50 +1246,37 @@ static int maven_detect_client(struct i2c_adapter* adapter, int address, int kin
 		err = -ENOMEM;
 		goto ERROR0;
 	}
-	new_client = &data->client;
-	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
-	new_client->adapter = adapter;
-	new_client->driver = &maven_driver;
-	new_client->flags = 0;
-	strlcpy(new_client->name, "maven", I2C_NAME_SIZE);
-	if ((err = i2c_attach_client(new_client)))
-		goto ERROR3;
-	err = maven_init_client(new_client);
+	i2c_set_clientdata(client, data);
+	err = maven_init_client(client);
 	if (err)
 		goto ERROR4;
 	return 0;
 ERROR4:;
-	i2c_detach_client(new_client);
-ERROR3:;
-	kfree(new_client);
+	kfree(data);
 ERROR0:;
 	return err;
 }
 
-static int maven_attach_adapter(struct i2c_adapter* adapter) {
-	if (adapter->id == I2C_HW_B_G400)
-		return i2c_probe(adapter, &addr_data, &maven_detect_client);
-	return 0;
-}
-
-static int maven_detach_client(struct i2c_client* client) {
-	int err;
-
-	if ((err = i2c_detach_client(client)))
-		return err;
+static int maven_remove(struct i2c_client *client)
+{
 	maven_shutdown_client(client);
 	kfree(i2c_get_clientdata(client));
 	return 0;
 }
 
+static const struct i2c_device_id maven_id[] = {
+	{ "maven", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, maven_id);
+
 static struct i2c_driver maven_driver={
 	.driver = {
 		.name	= "maven",
 	},
-	.id		= I2C_DRIVERID_MGATVO,
-	.attach_adapter	= maven_attach_adapter,
-	.detach_client	= maven_detach_client,
+	.probe		= maven_probe,
+	.remove		= maven_remove,
+	.id_table	= maven_id,
 };
 
 static int __init matroxfb_maven_init(void)
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index e7aa7ae8fca..97204497d9f 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1031,7 +1031,9 @@ static void pxafb_setup_gpio(struct pxafb_info *fbi)
 	pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
 	pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
 	pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
-	pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
+
+	if ((lccr0 & LCCR0_PAS) == 0)
+		pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
 }
 
 static void pxafb_enable_controller(struct pxafb_info *fbi)
@@ -1400,6 +1402,8 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi,
 	if (lcd_conn == LCD_MONO_STN_8BPP)
 		fbi->lccr0 |= LCCR0_DPD;
 
+	fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0;
+
 	fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff);
 	fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
 	fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL)  ? LCCR3_PCP : 0;
@@ -1673,53 +1677,63 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
 #define pxafb_setup_options()		(0)
 #endif
 
-static int __devinit pxafb_probe(struct platform_device *dev)
-{
-	struct pxafb_info *fbi;
-	struct pxafb_mach_info *inf;
-	struct resource *r;
-	int irq, ret;
-
-	dev_dbg(&dev->dev, "pxafb_probe\n");
-
-	inf = dev->dev.platform_data;
-	ret = -ENOMEM;
-	fbi = NULL;
-	if (!inf)
-		goto failed;
-
-	ret = pxafb_parse_options(&dev->dev, g_options);
-	if (ret < 0)
-		goto failed;
-
 #ifdef DEBUG_VAR
-	/* Check for various illegal bit-combinations. Currently only
-	 * a warning is given. */
+/* Check for various illegal bit-combinations. Currently only
+ * a warning is given. */
+static void __devinit pxafb_check_options(struct device *dev,
+					  struct pxafb_mach_info *inf)
+{
+	if (inf->lcd_conn)
+		return;
 
 	if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
-		dev_warn(&dev->dev, "machine LCCR0 setting contains "
+		dev_warn(dev, "machine LCCR0 setting contains "
 				"illegal bits: %08x\n",
 			inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
 	if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
-		dev_warn(&dev->dev, "machine LCCR3 setting contains "
+		dev_warn(dev, "machine LCCR3 setting contains "
 				"illegal bits: %08x\n",
 			inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
 	if (inf->lccr0 & LCCR0_DPD &&
 	    ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
 	     (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
 	     (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
-		dev_warn(&dev->dev, "Double Pixel Data (DPD) mode is "
+		dev_warn(dev, "Double Pixel Data (DPD) mode is "
 				"only valid in passive mono"
 				" single panel mode\n");
 	if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
 	    (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
-		dev_warn(&dev->dev, "Dual panel only valid in passive mode\n");
+		dev_warn(dev, "Dual panel only valid in passive mode\n");
 	if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
 	     (inf->modes->upper_margin || inf->modes->lower_margin))
-		dev_warn(&dev->dev, "Upper and lower margins must be 0 in "
+		dev_warn(dev, "Upper and lower margins must be 0 in "
 				"passive mode\n");
+}
+#else
+#define pxafb_check_options(...)	do {} while (0)
 #endif
 
+static int __devinit pxafb_probe(struct platform_device *dev)
+{
+	struct pxafb_info *fbi;
+	struct pxafb_mach_info *inf;
+	struct resource *r;
+	int irq, ret;
+
+	dev_dbg(&dev->dev, "pxafb_probe\n");
+
+	inf = dev->dev.platform_data;
+	ret = -ENOMEM;
+	fbi = NULL;
+	if (!inf)
+		goto failed;
+
+	ret = pxafb_parse_options(&dev->dev, g_options);
+	if (ret < 0)
+		goto failed;
+
+	pxafb_check_options(&dev->dev, inf);
+
 	dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",
 			inf->modes->xres,
 			inf->modes->yres,
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 32b9fe15364..db20542796b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -285,10 +285,11 @@ config ALIM1535_WDT
 
 config ALIM7101_WDT
 	tristate "ALi M7101 PMU Computer Watchdog"
-	depends on X86 && PCI
+	depends on PCI
 	help
 	  This is the driver for the hardware watchdog on the ALi M7101 PMU
-	  as used in the x86 Cobalt servers.
+	  as used in the x86 Cobalt servers and also found in some
+	  SPARC Netra servers too.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called alim7101_wdt.
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 049c9189569..ca3dc043d78 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -66,7 +66,10 @@ obj-$(CONFIG_IB700_WDT) += ib700wdt.o
 obj-$(CONFIG_IBMASR) += ibmasr.o
 obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
 obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
-obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o
+obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o
+ifeq ($(CONFIG_ITCO_VENDOR_SUPPORT),y)
+obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o
+endif
 obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o
 obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o
 obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index bacd867dd22..d061f0ad2d2 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -128,7 +128,7 @@ static struct watchdog_info at91_wdt_info = {
 /*
  * Handle commands from user-space.
  */
-static long at91_wdt_ioct(struct file *file,
+static long at91_wdt_ioctl(struct file *file,
 					unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c
index 41264a5f173..8302ef005be 100644
--- a/drivers/watchdog/ixp4xx_wdt.c
+++ b/drivers/watchdog/ixp4xx_wdt.c
@@ -29,7 +29,7 @@ static int nowayout = WATCHDOG_NOWAYOUT;
 static int heartbeat = 60;	/* (secs) Default is 1 minute */
 static unsigned long wdt_status;
 static unsigned long boot_status;
-static spin_lock_t wdt_lock;
+static DEFINE_SPINLOCK(wdt_lock);
 
 #define WDT_TICK_RATE (IXP4XX_PERIPHERAL_BUS_CLOCK * 1000000UL)
 
diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c
index 3b0ddc7fcf3..9e1331a3b21 100644
--- a/drivers/watchdog/pcwd.c
+++ b/drivers/watchdog/pcwd.c
@@ -168,7 +168,7 @@ static const int heartbeat_tbl[] = {
 static int cards_found;
 
 /* internal variables */
-static atomic_t open_allowed = ATOMIC_INIT(1);
+static unsigned long open_allowed;
 static char expect_close;
 static int temp_panic;
 
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 3da2b90d2fe..22715e3be5e 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -157,8 +157,6 @@ static void s3c2410wdt_start(void)
 	writel(wdt_count, wdt_base + S3C2410_WTCNT);
 	writel(wtcon, wdt_base + S3C2410_WTCON);
 	spin_unlock(&wdt_lock);
-
-	return 0;
 }
 
 static int s3c2410wdt_set_heartbeat(int timeout)
diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
index 824125adf90..cdc7138be30 100644
--- a/drivers/watchdog/shwdt.c
+++ b/drivers/watchdog/shwdt.c
@@ -30,7 +30,7 @@
 #include <linux/mm.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
-#include <linux/watchdog.h>
+#include <asm/watchdog.h>
 
 #define PFX "shwdt: "
 
@@ -68,7 +68,7 @@ static int clock_division_ratio = WTCSR_CKS_4096;
 static void sh_wdt_ping(unsigned long data);
 
 static unsigned long shwdt_is_open;
-static struct watchdog_info sh_wdt_info;
+static const struct watchdog_info sh_wdt_info;
 static char shwdt_expect_close;
 static DEFINE_TIMER(timer, sh_wdt_ping, 0, 0);
 static unsigned long next_heartbeat;
@@ -89,7 +89,7 @@ static void sh_wdt_start(void)
 	__u8 csr;
 	unsigned long flags;
 
-	spin_lock_irqsave(&wdt_lock, flags);
+	spin_lock_irqsave(&shwdt_lock, flags);
 
 	next_heartbeat = jiffies + (heartbeat * HZ);
 	mod_timer(&timer, next_ping_period(clock_division_ratio));
@@ -127,7 +127,7 @@ static void sh_wdt_start(void)
 	csr &= ~RSTCSR_RSTS;
 	sh_wdt_write_rstcsr(csr);
 #endif
-	spin_unlock_irqrestore(&wdt_lock, flags);
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 }
 
 /**
@@ -139,14 +139,14 @@ static void sh_wdt_stop(void)
 	__u8 csr;
 	unsigned long flags;
 
-	spin_lock_irqsave(&wdt_lock, flags);
+	spin_lock_irqsave(&shwdt_lock, flags);
 
 	del_timer(&timer);
 
 	csr = sh_wdt_read_csr();
 	csr &= ~WTCSR_TME;
 	sh_wdt_write_csr(csr);
-	spin_unlock_irqrestore(&wdt_lock, flags);
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 }
 
 /**
@@ -157,9 +157,9 @@ static inline void sh_wdt_keepalive(void)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&wdt_lock, flags);
+	spin_lock_irqsave(&shwdt_lock, flags);
 	next_heartbeat = jiffies + (heartbeat * HZ);
-	spin_unlock_irqrestore(&wdt_lock, flags);
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 }
 
 /**
@@ -173,9 +173,9 @@ static int sh_wdt_set_heartbeat(int t)
 	if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */
 		return -EINVAL;
 
-	spin_lock_irqsave(&wdt_lock, flags);
+	spin_lock_irqsave(&shwdt_lock, flags);
 	heartbeat = t;
-	spin_unlock_irqrestore(&wdt_lock, flags);
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 	return 0;
 }
 
@@ -189,7 +189,7 @@ static void sh_wdt_ping(unsigned long data)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&wdt_lock, flags);
+	spin_lock_irqsave(&shwdt_lock, flags);
 	if (time_before(jiffies, next_heartbeat)) {
 		__u8 csr;
 
@@ -203,7 +203,7 @@ static void sh_wdt_ping(unsigned long data)
 	} else
 		printk(KERN_WARNING PFX "Heartbeat lost! Will not ping "
 		       "the watchdog\n");
-	spin_unlock_irqrestore(&wdt_lock, flags);
+	spin_unlock_irqrestore(&shwdt_lock, flags);
 }
 
 /**
diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c
index dbbc018a5f4..6adab77fbbb 100644
--- a/drivers/watchdog/txx9wdt.c
+++ b/drivers/watchdog/txx9wdt.c
@@ -45,7 +45,7 @@ static unsigned long txx9wdt_alive;
 static int expect_close;
 static struct txx9_tmr_reg __iomem *txx9wdt_reg;
 static struct clk *txx9_imclk;
-static DECLARE_LOCK(txx9_lock);
+static DEFINE_SPINLOCK(txx9_lock);
 
 static void txx9wdt_ping(void)
 {
diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c
index c8d7f1b2df0..db362c34958 100644
--- a/drivers/watchdog/wdt285.c
+++ b/drivers/watchdog/wdt285.c
@@ -208,7 +208,7 @@ static int __init footbridge_watchdog_init(void)
 								soft_margin);
 
 	if (machine_is_cats())
-		printk(KERN_WARN
+		printk(KERN_WARNING
 		  "Warning: Watchdog reset may not work on this machine.\n");
 	return 0;
 }