Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Ensure we re-enable devices on resume
  x86/PCI: parse additional host bridge window resource types
  PCI: revert broken device warning
  PCI aerdrv: use correct bit defines and add 2ms delay to aer_root_reset
  x86/PCI: ignore Consumer/Producer bit in ACPI window descriptions

3 files changed, 16 insertions, 23 deletions

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 5ea587e59e4..37499127c80 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -679,7 +679,7 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
  */
 int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
 {
-	return state > PCI_D0 ?
+	return state >= PCI_D0 ?
 			pci_platform_power_transition(dev, state) : -EINVAL;
 }
 EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
@@ -716,10 +716,6 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 		 */
 		return 0;
 
-	/* Check if we're already there */
-	if (dev->current_state == state)
-		return 0;
-
 	__pci_start_power_transition(dev, state);
 
 	/* This device is quirked not to be put into D3, so
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index aa495ad9bbd..7a711ee314b 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -244,11 +244,17 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 
 	/* Assert Secondary Bus Reset */
 	pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &p2p_ctrl);
-	p2p_ctrl |= PCI_CB_BRIDGE_CTL_CB_RESET;
+	p2p_ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
 	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
 
+	/*
+	 * we should send hot reset message for 2ms to allow it time to
+	 * propogate to all downstream ports
+	 */
+	msleep(2);
+
 	/* De-assert Secondary Bus Reset */
-	p2p_ctrl &= ~PCI_CB_BRIDGE_CTL_CB_RESET;
+	p2p_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
 	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
 
 	/*
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 882bd8d29fe..c82548afcd5 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -174,19 +174,14 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	pci_read_config_dword(dev, pos, &sz);
 	pci_write_config_dword(dev, pos, l);
 
-	if (!sz)
-		goto fail;	/* BAR not implemented */
-
 	/*
 	 * All bits set in sz means the device isn't working properly.
-	 * If it's a memory BAR or a ROM, bit 0 must be clear; if it's
-	 * an io BAR, bit 1 must be clear.
+	 * If the BAR isn't implemented, all bits must be 0.  If it's a
+	 * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
+	 * 1 must be clear.
 	 */
-	if (sz == 0xffffffff) {
-		dev_err(&dev->dev, "reg %x: invalid size %#x; broken device?\n",
-			pos, sz);
+	if (!sz || sz == 0xffffffff)
 		goto fail;
-	}
 
 	/*
 	 * I don't know how l can have all bits set.  Copied from old code.
@@ -249,17 +244,13 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 				   pos, res);
 		}
 	} else {
-		u32 size = pci_size(l, sz, mask);
+		sz = pci_size(l, sz, mask);
 
-		if (!size) {
-			dev_err(&dev->dev, "reg %x: invalid size "
-			        "(l %#x sz %#x mask %#x); broken device?",
-				pos, l, sz, mask);
+		if (!sz)
 			goto fail;
-		}
 
 		res->start = l;
-		res->end = l + size;
+		res->end = l + sz;
 
 		dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
 	}