Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits)
  OMAP clock: use debugfs_remove_recursive() for rewinding
  OMAP2/3/4 core: create omap_device layer
  OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects
  OMAP2/3/4: create omap_hwmod layer
  OMAP2/3 board-*.c files: read bootloader configuration earlier
  OMAP2/3/4 PRCM: add module IDLEST wait code
  OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer
  OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm
  OMAP clock: associate MPU clocks with the mpu_clkdm
  OMAP3 clock: Fixed processing of bootarg 'mpurate'
  OMAP: SDRC: Add several new register definitions
  OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.
  OMAP: PM: Added suspend target state control to debugfs for OMAP3
  OMAP: PM debug: Add PRCM register dump support
  OMAP: PM debug: make powerdomains use PM-debug counters
  OMAP: PM: Add pm-debug counters
  OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
  OMAP: PM: Hook into PM counters
  OMAP: PM counter infrastructure.
  OMAP3: PM: fix lockdep warning caused by omap3_pm_init
  ...

3 files changed, 18 insertions, 18 deletions

diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 87ec7b18ac6..bba85add35a 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -116,7 +116,7 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
 		}
 	} else
 		/* disable keyboard interrupt and schedule for handling */
-		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
 	tasklet_schedule(&kp_tasklet);
 
@@ -143,20 +143,20 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
 
 	} else {
 		/* disable keyboard interrupt and schedule for handling */
-		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
 		/* read the keypad status */
-		omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+		omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
 		for (col = 0; col < omap_kp->cols; col++) {
 			omap_writew(~(1 << col) & 0xff,
-				    OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+				    OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
 
 			udelay(omap_kp->delay);
 
-			state[col] = ~omap_readw(OMAP_MPUIO_BASE +
+			state[col] = ~omap_readw(OMAP1_MPUIO_BASE +
 						 OMAP_MPUIO_KBR_LATCH) & 0xff;
 		}
-		omap_writew(0x00, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
+		omap_writew(0x00, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBC);
 		udelay(2);
 	}
 }
@@ -234,7 +234,7 @@ static void omap_kp_tasklet(unsigned long data)
 			for (i = 0; i < omap_kp_data->rows; i++)
 				enable_irq(gpio_to_irq(row_gpios[i]));
 		} else {
-			omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+			omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 			kp_cur_group = -1;
 		}
 	}
@@ -317,7 +317,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 
 	/* Disable the interrupt for the MPUIO keyboard */
 	if (!cpu_is_omap24xx())
-		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
 	keymap = pdata->keymap;
 
@@ -391,7 +391,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	}
 
 	if (pdata->dbounce)
-		omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
+		omap_writew(0xff, OMAP1_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
 
 	/* scan current status and enable interrupt */
 	omap_kp_scan_keypad(omap_kp, keypad_state);
@@ -402,7 +402,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 					"omap-keypad", omap_kp) < 0)
 				goto err4;
 		}
-		omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 	} else {
 		for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) {
 			if (request_irq(gpio_to_irq(row_gpios[irq_idx]),
@@ -449,7 +449,7 @@ static int __devexit omap_kp_remove(struct platform_device *pdev)
 			free_irq(gpio_to_irq(row_gpios[i]), 0);
 		}
 	} else {
-		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
+		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 		free_irq(omap_kp->irq, 0);
 	}
 
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 782994ead0e..005b91f096f 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -63,7 +63,7 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
 {
 	struct nand_chip *this = mtd->priv;
 
-	omap_writew(0, (OMAP_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
+	omap_writew(0, (OMAP1_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
 	omap_writew(byte, this->IO_ADDR_W);
 	ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, 0);
 	ndelay(40);
@@ -78,7 +78,7 @@ static u_char ams_delta_read_byte(struct mtd_info *mtd)
 
 	ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, 0);
 	ndelay(40);
-	omap_writew(~0, (OMAP_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
+	omap_writew(~0, (OMAP1_MPUIO_BASE + OMAP_MPUIO_IO_CNTL));
 	res = omap_readw(this->IO_ADDR_R);
 	ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE,
 			       AMS_DELTA_LATCH2_NAND_NRE);
@@ -178,8 +178,8 @@ static int __init ams_delta_init(void)
 	ams_delta_mtd->priv = this;
 
 	/* Set address of NAND IO lines */
-	this->IO_ADDR_R = (OMAP_MPUIO_BASE + OMAP_MPUIO_INPUT_LATCH);
-	this->IO_ADDR_W = (OMAP_MPUIO_BASE + OMAP_MPUIO_OUTPUT);
+	this->IO_ADDR_R = (OMAP1_MPUIO_BASE + OMAP_MPUIO_INPUT_LATCH);
+	this->IO_ADDR_W = (OMAP1_MPUIO_BASE + OMAP_MPUIO_OUTPUT);
 	this->read_byte = ams_delta_read_byte;
 	this->write_buf = ams_delta_write_buf;
 	this->read_buf = ams_delta_read_buf;
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index 148cbcc3960..915439dc05a 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -212,9 +212,9 @@ static void enable_rfbi_mode(int enable)
 	dispc_write_reg(DISPC_CONTROL, l);
 
 	/* Set bypass mode in RFBI module */
-	l = __raw_readl(IO_ADDRESS(RFBI_CONTROL));
+	l = __raw_readl(OMAP2_IO_ADDRESS(RFBI_CONTROL));
 	l |= enable ? 0 : (1 << 1);
-	__raw_writel(l, IO_ADDRESS(RFBI_CONTROL));
+	__raw_writel(l, OMAP2_IO_ADDRESS(RFBI_CONTROL));
 }
 
 static void set_lcd_data_lines(int data_lines)
@@ -1421,7 +1421,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
 	}
 
 	/* L3 firewall setting: enable access to OCM RAM */
-	__raw_writel(0x402000b0, IO_ADDRESS(0x680050a0));
+	__raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0));
 
 	if ((r = alloc_palette_ram()) < 0)
 		goto fail2;