V4L/DVB (3665): Add new NEC uPD64031A and uPD64083 i2c drivers

- Add support for the uPD64031A NEC Electronics Ghost Reduction i2c device
- Add support for the uPD6408x NEC Electronics 3-Dimensional Y/C separation
  i2c device.

Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com>
Signed-off-by: Takeru Komoriya <komoriya@paken.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

4 files changed, 581 insertions, 7 deletions

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index e19c403c321..fb5be260620 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -300,7 +300,7 @@ config VIDEO_OVCAMCHIP
 	  camera drivers.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ovcamchip
+	  module will be called ovcamchip.
 
 config VIDEO_M32R_AR
 	tristate "AR devices"
@@ -330,7 +330,7 @@ config VIDEO_MSP3400
 	  Support for the Micronas MSP34xx series of audio decoders.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called msp3400
+	  module will be called msp3400.
 
 config VIDEO_CS53L32A
 	tristate "Cirrus Logic CS53L32A audio ADC"
@@ -340,7 +340,7 @@ config VIDEO_CS53L32A
 	  stereo A/D converter.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called cs53l32a
+	  module will be called cs53l32a.
 
 config VIDEO_WM8775
 	tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
@@ -350,7 +350,7 @@ config VIDEO_WM8775
 	  performance stereo A/D Converter with a 4 channel input mixer.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called wm8775
+	  module will be called wm8775.
 
 config VIDEO_WM8739
 	tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
@@ -360,7 +360,7 @@ config VIDEO_WM8739
 	  stereo A/D Converter.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called wm8739
+	  module will be called wm8739.
 
 source "drivers/media/video/cx25840/Kconfig"
 
@@ -371,7 +371,7 @@ config VIDEO_SAA711X
 	  Support for the Philips SAA7113/4/5 video decoders.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called saa7115
+	  module will be called saa7115.
 
 config VIDEO_SAA7127
 	tristate "Philips SAA7127/9 digital video encoders"
@@ -380,7 +380,30 @@ config VIDEO_SAA7127
 	  Support for the Philips SAA7127/9 digital video encoders.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called saa7127
+	  module will be called saa7127.
+
+config VIDEO_UPD64031A
+	tristate "NEC Electronics uPD64031A Ghost Reduction"
+	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	---help---
+	  Support for the NEC Electronics uPD64031A Ghost Reduction
+	  video chip. It is most often found in NTSC TV cards made for
+	  Japan and is used to reduce the 'ghosting' effect that can
+	  be present in analog TV broadcasts.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called upd64031a.
+
+config VIDEO_UPD64083
+	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
+	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	---help---
+	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
+	  separation video chip. It is used to improve the quality of
+	  the colors of a composite signal.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called upd64083.
 
 endmenu # encoder / decoder chips
 
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 6cb29654170..4092a5e37ff 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -65,6 +65,8 @@ obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
 obj-$(CONFIG_VIDEO_CX25840) += cx25840/
 obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o
 obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o
+obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
+obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
 
 obj-$(CONFIG_USB_DABUSB)        += dabusb.o
 obj-$(CONFIG_USB_DSBR)          += dsbr100.o
diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c
new file mode 100644
index 00000000000..bab5beadc6a
--- /dev/null
+++ b/drivers/media/video/upd64031a.c
@@ -0,0 +1,287 @@
+/*
+ * upd64031A - NEC Electronics Ghost Reduction for NTSC in Japan
+ *
+ * 2003 by T.Adachi <tadachi@tadachi-net.com>
+ * 2003 by Takeru KOMORIYA <komoriya@paken.org>
+ * 2006 by Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/upd64031a.h>
+
+// --------------------- read registers functions define -----------------------
+
+/* bit masks */
+#define GR_MODE_MASK              0xc0
+#define DIRECT_3DYCS_CONNECT_MASK 0xc0
+#define SYNC_CIRCUIT_MASK         0xa0
+
+// -----------------------------------------------------------------------------
+
+MODULE_DESCRIPTION("uPD64031A driver");
+MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil");
+MODULE_LICENSE("GPL");
+
+static int debug = 0;
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
+
+static unsigned short normal_i2c[] = { 0x24 >> 1, 0x26 >> 1, I2C_CLIENT_END };
+
+
+I2C_CLIENT_INSMOD;
+
+enum {
+	R00 = 0, R01, R02, R03, R04,
+	R05, R06, R07, R08, R09,
+	R0A, R0B, R0C, R0D, R0E, R0F,
+	/* unused registers
+	 R10, R11, R12, R13, R14,
+	 R15, R16, R17,
+	 */
+	TOT_REGS
+};
+
+struct upd64031a_state {
+	u8 regs[TOT_REGS];
+	u8 gr_mode;
+	u8 direct_3dycs_connect;
+	u8 ext_comp_sync;
+	u8 ext_vert_sync;
+};
+
+static u8 upd64031a_init[] = {
+	0x00, 0xb8, 0x48, 0xd2, 0xe6,
+	0x03, 0x10, 0x0b, 0xaf, 0x7f,
+	0x00, 0x00, 0x1d, 0x5e, 0x00,
+	0xd0
+};
+
+/* ------------------------------------------------------------------------ */
+
+static u8 upd64031a_read(struct i2c_client *client, u8 reg)
+{
+	u8 buf[2];
+
+	if (reg >= sizeof(buf))
+		return 0xff;
+	i2c_master_recv(client, buf, 2);
+	return buf[reg];
+}
+
+/* ------------------------------------------------------------------------ */
+
+static void upd64031a_write(struct i2c_client *client, u8 reg, u8 val)
+{
+	u8 buf[2];
+
+	buf[0] = reg;
+	buf[1] = val;
+	v4l_dbg(1, debug, client, "writing reg addr: %02X val: %02X\n", reg, val);
+	if (i2c_master_send(client, buf, 2) != 2)
+		v4l_err(client, "I/O error write 0x%02x/0x%02x\n", reg, val);
+}
+
+/* ------------------------------------------------------------------------ */
+
+/* The input changed due to new input or channel changed */
+static void upd64031a_change(struct i2c_client *client)
+{
+	struct upd64031a_state *state = i2c_get_clientdata(client);
+	u8 reg = state->regs[R00];
+
+	v4l_dbg(1, debug, client, "changed input or channel\n");
+	upd64031a_write(client, R00, reg | 0x10);
+	upd64031a_write(client, R00, reg & ~0x10);
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int upd64031a_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+	struct upd64031a_state *state = i2c_get_clientdata(client);
+	struct v4l2_routing *route = arg;
+
+	switch (cmd) {
+	case VIDIOC_S_FREQUENCY:
+		upd64031a_change(client);
+		break;
+
+	case VIDIOC_INT_G_VIDEO_ROUTING:
+		route->input = (state->gr_mode >> 6) |
+			(state->direct_3dycs_connect >> 4) |
+			(state->ext_comp_sync >> 1) |
+			(state->ext_vert_sync >> 2);
+		route->output = 0;
+		break;
+
+	case VIDIOC_INT_S_VIDEO_ROUTING:
+	{
+		u8 r00, r05, r08;
+
+		state->gr_mode = (route->input & 3) << 6;
+		state->direct_3dycs_connect = (route->input & 0xc) << 4;
+		state->ext_comp_sync = (route->input & UPD64031A_COMPOSITE_EXTERNAL) << 1;
+		state->ext_vert_sync = (route->input & UPD64031A_VERTICAL_EXTERNAL) << 2;
+		r00 = (state->regs[R00] & ~GR_MODE_MASK) | state->gr_mode;
+		r05 = (state->regs[R00] & ~SYNC_CIRCUIT_MASK) |
+			state->ext_comp_sync | state->ext_vert_sync;
+		r08 = (state->regs[R08] & ~DIRECT_3DYCS_CONNECT_MASK) |
+			state->direct_3dycs_connect;
+		upd64031a_write(client, R00, r00);
+		upd64031a_write(client, R05, r05);
+		upd64031a_write(client, R08, r08);
+		upd64031a_change(client);
+		break;
+	}
+
+	case VIDIOC_LOG_STATUS:
+		v4l_info(client, "Status: SA00=0x%02x SA01=0x%02x\n",
+			upd64031a_read(client, 0), upd64031a_read(client, 1));
+		break;
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	case VIDIOC_INT_G_REGISTER:
+	{
+		struct v4l2_register *reg = arg;
+
+		if (reg->i2c_id != I2C_DRIVERID_UPD64031A)
+			return -EINVAL;
+		reg->val = upd64031a_read(client, reg->reg & 0xff);
+		break;
+	}
+
+	case VIDIOC_INT_S_REGISTER:
+	{
+		struct v4l2_register *reg = arg;
+		u8 addr = reg->reg & 0xff;
+		u8 val = reg->val & 0xff;
+
+		if (reg->i2c_id != I2C_DRIVERID_UPD64031A)
+			return -EINVAL;
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		upd64031a_write(client, addr, val);
+		break;
+	}
+#endif
+
+	default:
+		break;
+	}
+	return 0;
+}
+
+/* ------------------------------------------------------------------------ */
+
+/* i2c implementation */
+
+static struct i2c_driver i2c_driver;
+
+static int upd64031a_attach(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *client;
+	struct upd64031a_state *state;
+	int i;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return 0;
+
+	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (client == NULL) {
+		return -ENOMEM;
+	}
+
+	client->addr = address;
+	client->adapter = adapter;
+	client->driver = &i2c_driver;
+	snprintf(client->name, sizeof(client->name) - 1, "uPD64031A");
+
+	v4l_info(client, "chip found @ 0x%x (%s)\n", address << 1, adapter->name);
+
+	state = kmalloc(sizeof(struct upd64031a_state), GFP_KERNEL);
+	if (state == NULL) {
+		kfree(client);
+		return -ENOMEM;
+	}
+	i2c_set_clientdata(client, state);
+	memcpy(state->regs, upd64031a_init, sizeof(state->regs));
+	state->gr_mode = UPD64031A_GR_ON << 6;
+	state->direct_3dycs_connect = UPD64031A_3DYCS_COMPOSITE << 4;
+	state->ext_comp_sync = state->ext_vert_sync = 0;
+	for (i = 0; i < TOT_REGS; i++) {
+		upd64031a_write(client, i, state->regs[i]);
+	}
+
+	i2c_attach_client(client);
+
+	return 0;
+}
+
+static int upd64031a_probe(struct i2c_adapter *adapter)
+{
+	if (adapter->class & I2C_CLASS_TV_ANALOG)
+		return i2c_probe(adapter, &addr_data, upd64031a_attach);
+	return 0;
+}
+
+static int upd64031a_detach(struct i2c_client *client)
+{
+	int err;
+
+	err = i2c_detach_client(client);
+	if (err)
+		return err;
+
+	kfree(client);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* i2c implementation */
+static struct i2c_driver i2c_driver = {
+	.driver = {
+		.name = "upd64031a",
+	},
+	.id = I2C_DRIVERID_UPD64031A,
+	.attach_adapter = upd64031a_probe,
+	.detach_client  = upd64031a_detach,
+	.command = upd64031a_command,
+};
+
+
+static int __init upd64031a_init_module(void)
+{
+	return i2c_add_driver(&i2c_driver);
+}
+
+static void __exit upd64031a_exit_module(void)
+{
+	i2c_del_driver(&i2c_driver);
+}
+
+module_init(upd64031a_init_module);
+module_exit(upd64031a_exit_module);
+
diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c
new file mode 100644
index 00000000000..c3a7ffe5c26
--- /dev/null
+++ b/drivers/media/video/upd64083.c
@@ -0,0 +1,262 @@
+/*
+ * upd6408x - NEC Electronics 3-Dimensional Y/C separation driver
+ *
+ * 2003 by T.Adachi (tadachi@tadachi-net.com)
+ * 2003 by Takeru KOMORIYA <komoriya@paken.org>
+ * 2006 by Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/upd64083.h>
+
+MODULE_DESCRIPTION("uPD64083 driver");
+MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil");
+MODULE_LICENSE("GPL");
+
+static int debug = 0;
+module_param(debug, bool, 0644);
+
+MODULE_PARM_DESC(debug, "Debug level (0-1)");
+
+static unsigned short normal_i2c[] = { 0xb8 >> 1, 0xba >> 1, I2C_CLIENT_END };
+
+
+I2C_CLIENT_INSMOD;
+
+enum {
+	R00 = 0, R01, R02, R03, R04,
+	R05, R06, R07, R08, R09,
+	R0A, R0B, R0C, R0D, R0E, R0F,
+	R10, R11, R12, R13, R14,
+	R15, R16,
+	TOT_REGS
+};
+
+struct upd64083_state {
+	u8 mode;
+	u8 ext_y_adc;
+	u8 regs[TOT_REGS];
+};
+
+/* Initial values when used in combination with the
+   NEC upd64031a ghost reduction chip. */
+static u8 upd64083_init[] = {
+	0x1f, 0x01, 0xa0, 0x2d, 0x29,  /* we use EXCSS=0 */
+	0x36, 0xdd, 0x05, 0x56, 0x48,
+	0x00, 0x3a, 0xa0, 0x05, 0x08,
+	0x44, 0x60, 0x08, 0x52, 0xf8,
+	0x53, 0x60, 0x10
+};
+
+/* ------------------------------------------------------------------------ */
+
+static void upd64083_log_status(struct i2c_client *client)
+{
+	u8 buf[7];
+
+	i2c_master_recv(client, buf, 7);
+	v4l_info(client, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x "
+		      "SA04=%02x SA05=%02x SA06=%02x\n",
+		buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
+}
+
+/* ------------------------------------------------------------------------ */
+
+static void upd64083_write(struct i2c_client *client, u8 reg, u8 val)
+{
+	u8 buf[2];
+
+	buf[0] = reg;
+	buf[1] = val;
+	v4l_dbg(1, debug, client, "writing reg addr: %02x val: %02x\n", reg, val);
+	if (i2c_master_send(client, buf, 2) != 2)
+		v4l_err(client, "I/O error write 0x%02x/0x%02x\n", reg, val);
+}
+
+/* ------------------------------------------------------------------------ */
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static u8 upd64083_read(struct i2c_client *client, u8 reg)
+{
+	u8 buf[7];
+
+	if (reg >= sizeof(buf))
+		return 0xff;
+	i2c_master_recv(client, buf, sizeof(buf));
+	return buf[reg];
+}
+#endif
+
+/* ------------------------------------------------------------------------ */
+
+static int upd64083_command(struct i2c_client *client, unsigned int cmd, void *arg)
+{
+	struct upd64083_state *state = i2c_get_clientdata(client);
+	struct v4l2_routing *route = arg;
+
+	switch (cmd) {
+	case VIDIOC_INT_G_VIDEO_ROUTING:
+		route->input = (state->mode >> 6) | (state->ext_y_adc >> 3);
+		route->output = 0;
+		break;
+
+	case VIDIOC_INT_S_VIDEO_ROUTING:
+	{
+		u8 r00, r02;
+
+		if (route->input > 7 || (route->input & 6) == 6)
+			return -EINVAL;
+		state->mode = (route->input & 3) << 6;
+		state->ext_y_adc = (route->input & UPD64083_EXT_Y_ADC) << 3;
+		r00 = (state->regs[R00] & ~(3 << 6)) | state->mode;
+		r02 = (state->regs[R02] & ~(1 << 5)) | state->ext_y_adc;
+		upd64083_write(client, R00, r00);
+		upd64083_write(client, R02, r02);
+		break;
+	}
+
+	case VIDIOC_LOG_STATUS:
+		upd64083_log_status(client);
+		break;
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	case VIDIOC_INT_G_REGISTER:
+	{
+		struct v4l2_register *reg = arg;
+
+		if (reg->i2c_id != I2C_DRIVERID_UPD64083)
+			return -EINVAL;
+		reg->val = upd64083_read(client, reg->reg & 0xff);
+		break;
+	}
+
+	case VIDIOC_INT_S_REGISTER:
+	{
+		struct v4l2_register *reg = arg;
+		u8 addr = reg->reg & 0xff;
+		u8 val = reg->val & 0xff;
+
+		if (reg->i2c_id != I2C_DRIVERID_UPD64083)
+			return -EINVAL;
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		upd64083_write(client, addr, val);
+		break;
+	}
+#endif
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------ */
+
+/* i2c implementation */
+
+static struct i2c_driver i2c_driver;
+
+static int upd64083_attach(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *client;
+	struct upd64083_state *state;
+	int i;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return 0;
+
+	client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (client == NULL) {
+		return -ENOMEM;
+	}
+
+	client->addr = address;
+	client->adapter = adapter;
+	client->driver = &i2c_driver;
+	snprintf(client->name, sizeof(client->name) - 1, "uPD64083");
+
+	v4l_info(client, "chip found @ 0x%x (%s)\n", address << 1, adapter->name);
+
+	state = kmalloc(sizeof(struct upd64083_state), GFP_KERNEL);
+	if (state == NULL) {
+		kfree(client);
+		return -ENOMEM;
+	}
+	i2c_set_clientdata(client, state);
+	/* Initially assume that a ghost reduction chip is present */
+	state->mode = 0;  /* YCS mode */
+	state->ext_y_adc = (1 << 5);
+	memcpy(state->regs, upd64083_init, TOT_REGS);
+	for (i = 0; i < TOT_REGS; i++) {
+		upd64083_write(client, i, state->regs[i]);
+	}
+	i2c_attach_client(client);
+
+	return 0;
+}
+
+static int upd64083_probe(struct i2c_adapter *adapter)
+{
+	if (adapter->class & I2C_CLASS_TV_ANALOG)
+		return i2c_probe(adapter, &addr_data, upd64083_attach);
+	return 0;
+}
+
+static int upd64083_detach(struct i2c_client *client)
+{
+	int err;
+
+	err = i2c_detach_client(client);
+	if (err)
+		return err;
+
+	kfree(client);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* i2c implementation */
+static struct i2c_driver i2c_driver = {
+	.driver = {
+		.name = "upd64083",
+	},
+	.id = I2C_DRIVERID_UPD64083,
+	.attach_adapter = upd64083_probe,
+	.detach_client  = upd64083_detach,
+	.command = upd64083_command,
+};
+
+
+static int __init upd64083_init_module(void)
+{
+	return i2c_add_driver(&i2c_driver);
+}
+
+static void __exit upd64083_exit_module(void)
+{
+	i2c_del_driver(&i2c_driver);
+}
+
+module_init(upd64083_init_module);
+module_exit(upd64083_exit_module);