Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32: (40 commits)
  unicore32: rewrite arch-specific tlb.h to use asm-generic version
  unicore32: modify io_p2v and io_v2p macros, and adjust PKUNITY_mmio_BASEs
  unicore32: replace unicore32-specific iomap functions with generic lib implementation
  unicore32 machine related: add frame buffer driver for pkunity-v3 soc
  unicore32 machine related files: add i2c bus drivers for pkunity-v3 soc
  unicore32 io: redefine __REG(x) and re-use readl/writel funcs
  unicore32 i8042 upgrade and bugfix: adjust resource request region type
  unicore32 upgrade to v2.6.38-rc5: add one more paramter for pte_alloc_map call
  unicore32 i8042: adjust io funcs of i8042-unicore32io.h
  unicore32: rename PKUNITY_IOSPACE_BASE to PKUNITY_MMIO_BASE
  unicore32: modify function names and parameters for irq_chips
  unicore32: remove unused lines in arch/unicore32/include/asm/irq.h
  unicore32 time.c: change calculate method for clock_event_device
  unicore32: ADD MAINTAINER for unicore32 architecture
  unicore32 machine related files: ps2 driver
  unicore32 machine related files: pci bus handling
  unicore32 machine related files: hardware registers
  unicore32 machine related files: core files
  unicore32 additional architecture files: boot process
  unicore32 additional architecture files: low-level lib: misc
  ...

Acked-by: Arnd Bergmann <arnd@arndb.de>

9 files changed, 1252 insertions, 0 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 113505a6434..cbfcf6fb4a6 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -523,6 +523,17 @@ config I2C_PNX
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-pnx.
 
+config I2C_PUV3
+	tristate "PKUnity v3 I2C bus support"
+	depends on UNICORE32 && ARCH_PUV3
+	select I2C_ALGOBIT
+	help
+	  This driver supports the I2C IP inside the PKUnity-v3 SoC.
+	  This I2C bus controller is under AMBA/AXI bus.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-puv3.
+
 config I2C_PXA
 	tristate "Intel PXA2XX I2C adapter"
 	depends on ARCH_PXA || ARCH_MMP
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 9d2d0ec7fb2..a83966acc5a 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o
 obj-$(CONFIG_I2C_PCA_PLATFORM)	+= i2c-pca-platform.o
 obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
 obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
+obj-$(CONFIG_I2C_PUV3)		+= i2c-puv3.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
 obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
 obj-$(CONFIG_I2C_S6000)		+= i2c-s6000.o
diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c
new file mode 100644
index 00000000000..fac67394084
--- /dev/null
+++ b/drivers/i2c/busses/i2c-puv3.c
@@ -0,0 +1,306 @@
+/*
+ * I2C driver for PKUnity-v3 SoC
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+/*
+ * Poll the i2c status register until the specified bit is set.
+ * Returns 0 if timed out (100 msec).
+ */
+static short poll_status(unsigned long bit)
+{
+	int loop_cntr = 1000;
+
+	if (bit & I2C_STATUS_TFNF) {
+		do {
+			udelay(10);
+		} while (!(readl(I2C_STATUS) & bit) && (--loop_cntr > 0));
+	} else {
+		/* RXRDY handler */
+		do {
+			if (readl(I2C_TAR) == I2C_TAR_EEPROM)
+				msleep(20);
+			else
+				udelay(10);
+		} while (!(readl(I2C_RXFLR) & 0xf) && (--loop_cntr > 0));
+	}
+
+	return (loop_cntr > 0);
+}
+
+static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
+{
+	int i2c_reg = *buf;
+
+	/* Read data */
+	while (length--) {
+		if (!poll_status(I2C_STATUS_TFNF)) {
+			dev_dbg(&adap->dev, "Tx FIFO Not Full timeout\n");
+			return -ETIMEDOUT;
+		}
+
+		/* send addr */
+		writel(i2c_reg | I2C_DATACMD_WRITE, I2C_DATACMD);
+
+		/* get ready to next write */
+		i2c_reg++;
+
+		/* send read CMD */
+		writel(I2C_DATACMD_READ, I2C_DATACMD);
+
+		/* wait until the Rx FIFO have available */
+		if (!poll_status(I2C_STATUS_RFNE)) {
+			dev_dbg(&adap->dev, "RXRDY timeout\n");
+			return -ETIMEDOUT;
+		}
+
+		/* read the data to buf */
+		*buf = (readl(I2C_DATACMD) & I2C_DATACMD_DAT_MASK);
+		buf++;
+	}
+
+	return 0;
+}
+
+static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length)
+{
+	int i2c_reg = *buf;
+
+	/* Do nothing but storing the reg_num to a static variable */
+	if (i2c_reg == -1) {
+		printk(KERN_WARNING "Error i2c reg\n");
+		return -ETIMEDOUT;
+	}
+
+	if (length == 1)
+		return 0;
+
+	buf++;
+	length--;
+	while (length--) {
+		/* send addr */
+		writel(i2c_reg | I2C_DATACMD_WRITE, I2C_DATACMD);
+
+		/* send write CMD */
+		writel(*buf | I2C_DATACMD_WRITE, I2C_DATACMD);
+
+		/* wait until the Rx FIFO have available */
+		msleep(20);
+
+		/* read the data to buf */
+		i2c_reg++;
+		buf++;
+	}
+
+	return 0;
+}
+
+/*
+ * Generic i2c master transfer entrypoint.
+ *
+ */
+static int puv3_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg,
+		int num)
+{
+	int i, ret;
+	unsigned char swap;
+
+	/* Disable i2c */
+	writel(I2C_ENABLE_DISABLE, I2C_ENABLE);
+
+	/* Set the work mode and speed*/
+	writel(I2C_CON_MASTER | I2C_CON_SPEED_STD | I2C_CON_SLAVEDISABLE, I2C_CON);
+
+	writel(pmsg->addr, I2C_TAR);
+
+	/* Enable i2c */
+	writel(I2C_ENABLE_ENABLE, I2C_ENABLE);
+
+	dev_dbg(&adap->dev, "puv3_i2c_xfer: processing %d messages:\n", num);
+
+	for (i = 0; i < num; i++) {
+		dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i,
+			pmsg->flags & I2C_M_RD ? "read" : "writ",
+			pmsg->len, pmsg->len > 1 ? "s" : "",
+			pmsg->flags & I2C_M_RD ? "from" : "to",	pmsg->addr);
+
+		if (pmsg->len && pmsg->buf) {	/* sanity check */
+			if (pmsg->flags & I2C_M_RD)
+				ret = xfer_read(adap, pmsg->buf, pmsg->len);
+			else
+				ret = xfer_write(adap, pmsg->buf, pmsg->len);
+
+			if (ret)
+				return ret;
+
+		}
+		dev_dbg(&adap->dev, "transfer complete\n");
+		pmsg++;		/* next message */
+	}
+
+	/* XXX: fixup be16_to_cpu in bq27x00_battery.c */
+	if (pmsg->addr == I2C_TAR_PWIC) {
+		swap = pmsg->buf[0];
+		pmsg->buf[0] = pmsg->buf[1];
+		pmsg->buf[1] = swap;
+	}
+
+	return i;
+}
+
+/*
+ * Return list of supported functionality.
+ */
+static u32 puv3_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm puv3_i2c_algorithm = {
+	.master_xfer	= puv3_i2c_xfer,
+	.functionality	= puv3_i2c_func,
+};
+
+/*
+ * Main initialization routine.
+ */
+static int __devinit puv3_i2c_probe(struct platform_device *pdev)
+{
+	struct i2c_adapter *adapter;
+	struct resource *mem;
+	int rc;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem)
+		return -ENODEV;
+
+	if (!request_mem_region(mem->start, resource_size(mem), "puv3_i2c"))
+		return -EBUSY;
+
+	adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+	if (adapter == NULL) {
+		dev_err(&pdev->dev, "can't allocate inteface!\n");
+		rc = -ENOMEM;
+		goto fail_nomem;
+	}
+	snprintf(adapter->name, sizeof(adapter->name), "PUV3-I2C at 0x%08x",
+			mem->start);
+	adapter->algo = &puv3_i2c_algorithm;
+	adapter->class = I2C_CLASS_HWMON;
+	adapter->dev.parent = &pdev->dev;
+
+	platform_set_drvdata(pdev, adapter);
+
+	adapter->nr = pdev->id;
+	rc = i2c_add_numbered_adapter(adapter);
+	if (rc) {
+		dev_err(&pdev->dev, "Adapter '%s' registration failed\n",
+				adapter->name);
+		goto fail_add_adapter;
+	}
+
+	dev_info(&pdev->dev, "PKUnity v3 i2c bus adapter.\n");
+	return 0;
+
+fail_add_adapter:
+	platform_set_drvdata(pdev, NULL);
+	kfree(adapter);
+fail_nomem:
+	release_mem_region(mem->start, resource_size(mem));
+
+	return rc;
+}
+
+static int __devexit puv3_i2c_remove(struct platform_device *pdev)
+{
+	struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+	struct resource *mem;
+	int rc;
+
+	rc = i2c_del_adapter(adapter);
+	if (rc) {
+		dev_err(&pdev->dev, "Adapter '%s' delete fail\n",
+				adapter->name);
+		return rc;
+	}
+
+	put_device(&pdev->dev);
+	platform_set_drvdata(pdev, NULL);
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem->start, resource_size(mem));
+
+	return rc;
+}
+
+#ifdef CONFIG_PM
+static int puv3_i2c_suspend(struct platform_device *dev, pm_message_t state)
+{
+	int poll_count;
+	/* Disable the IIC */
+	writel(I2C_ENABLE_DISABLE, I2C_ENABLE);
+	for (poll_count = 0; poll_count < 50; poll_count++) {
+		if (readl(I2C_ENSTATUS) & I2C_ENSTATUS_ENABLE)
+			udelay(25);
+	}
+
+	return 0;
+}
+
+static int puv3_i2c_resume(struct platform_device *dev)
+{
+	return 0 ;
+}
+#else
+#define puv3_i2c_suspend NULL
+#define puv3_i2c_resume NULL
+#endif
+
+MODULE_ALIAS("platform:puv3_i2c");
+
+static struct platform_driver puv3_i2c_driver = {
+	.probe		= puv3_i2c_probe,
+	.remove		= __devexit_p(puv3_i2c_remove),
+	.suspend	= puv3_i2c_suspend,
+	.resume		= puv3_i2c_resume,
+	.driver		= {
+		.name	= "PKUnity-v3-I2C",
+		.owner	= THIS_MODULE,
+	}
+};
+
+static int __init puv3_i2c_init(void)
+{
+	return platform_driver_register(&puv3_i2c_driver);
+}
+
+static void __exit puv3_i2c_exit(void)
+{
+	platform_driver_unregister(&puv3_i2c_driver);
+}
+
+module_init(puv3_i2c_init);
+module_exit(puv3_i2c_exit);
+
+MODULE_DESCRIPTION("PKUnity v3 I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/serio/i8042-unicore32io.h b/drivers/input/serio/i8042-unicore32io.h
new file mode 100644
index 00000000000..73f5cc124a3
--- /dev/null
+++ b/drivers/input/serio/i8042-unicore32io.h
@@ -0,0 +1,73 @@
+/*
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2011 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _I8042_UNICORE32_H
+#define _I8042_UNICORE32_H
+
+#include <mach/hardware.h>
+
+/*
+ * Names.
+ */
+#define I8042_KBD_PHYS_DESC "isa0060/serio0"
+#define I8042_AUX_PHYS_DESC "isa0060/serio1"
+#define I8042_MUX_PHYS_DESC "isa0060/serio%d"
+
+/*
+ * IRQs.
+ */
+#define I8042_KBD_IRQ           IRQ_PS2_KBD
+#define I8042_AUX_IRQ           IRQ_PS2_AUX
+
+/*
+ * Register numbers.
+ */
+#define I8042_COMMAND_REG	PS2_COMMAND
+#define I8042_STATUS_REG	PS2_STATUS
+#define I8042_DATA_REG		PS2_DATA
+
+#define I8042_REGION_START	(resource_size_t)(PS2_DATA)
+#define I8042_REGION_SIZE	(resource_size_t)(16)
+
+static inline int i8042_read_data(void)
+{
+	return readb(I8042_DATA_REG);
+}
+
+static inline int i8042_read_status(void)
+{
+	return readb(I8042_STATUS_REG);
+}
+
+static inline void i8042_write_data(int val)
+{
+	writeb(val, I8042_DATA_REG);
+}
+
+static inline void i8042_write_command(int val)
+{
+	writeb(val, I8042_COMMAND_REG);
+}
+
+static inline int i8042_platform_init(void)
+{
+	if (!request_mem_region(I8042_REGION_START, I8042_REGION_SIZE, "i8042"))
+		return -EBUSY;
+
+	i8042_reset = 1;
+	return 0;
+}
+
+static inline void i8042_platform_exit(void)
+{
+	release_mem_region(I8042_REGION_START, I8042_REGION_SIZE);
+}
+
+#endif /* _I8042_UNICORE32_H */
diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
index ac1d759d0f5..3452708fbe3 100644
--- a/drivers/input/serio/i8042.h
+++ b/drivers/input/serio/i8042.h
@@ -26,6 +26,8 @@
 #include "i8042-sparcio.h"
 #elif defined(CONFIG_X86) || defined(CONFIG_IA64)
 #include "i8042-x86ia64io.h"
+#elif defined(CONFIG_UNICORE32)
+#include "i8042-unicore32io.h"
 #else
 #include "i8042-io.h"
 #endif
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 98e6fdf34d3..77cf813ba26 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_PCI_IOV) += iov.o
 obj-$(CONFIG_X86) += setup-bus.o
 obj-$(CONFIG_ALPHA) += setup-bus.o setup-irq.o
 obj-$(CONFIG_ARM) += setup-bus.o setup-irq.o
+obj-$(CONFIG_UNICORE32) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PARISC) += setup-bus.o
 obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o
 obj-$(CONFIG_PPC) += setup-bus.o
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e6791f7ecfb..2a753f1e918 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2303,6 +2303,17 @@ config FB_JZ4740
 	help
 	  Framebuffer support for the JZ4740 SoC.
 
+config FB_PUV3_UNIGFX
+	tristate "PKUnity v3 Unigfx framebuffer support"
+	depends on FB && UNICORE32 && ARCH_PUV3
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	help
+	  Choose this option if you want to use the Unigfx device as a
+	  framebuffer device. Without the support of PCI & AGP.
+
 source "drivers/video/omap/Kconfig"
 source "drivers/video/omap2/Kconfig"
 
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 8c8fabdff9d..b0eb3da2467 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -139,6 +139,7 @@ obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
 obj-$(CONFIG_FB_MSM)              += msm/
 obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
 obj-$(CONFIG_FB_JZ4740)		  += jz4740_fb.o
+obj-$(CONFIG_FB_PUV3_UNIGFX)      += fb-puv3.o
 
 # Platform or fallback drivers go here
 obj-$(CONFIG_FB_UVESA)            += uvesafb.o
diff --git a/drivers/video/fb-puv3.c b/drivers/video/fb-puv3.c
new file mode 100644
index 00000000000..dbd2dc4745d
--- /dev/null
+++ b/drivers/video/fb-puv3.c
@@ -0,0 +1,846 @@
+/*
+ * Frame Buffer Driver for PKUnity-v3 Unigfx
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/vmalloc.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/console.h>
+
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+
+/* Platform_data reserved for unifb registers. */
+#define UNIFB_REGS_NUM		10
+/* RAM reserved for the frame buffer. */
+#define UNIFB_MEMSIZE		(SZ_4M)		/* 4 MB for 1024*768*32b */
+
+/*
+ * cause UNIGFX don not have EDID
+ * all the modes are organized as follow
+ */
+static const struct fb_videomode unifb_modes[] = {
+	/* 0 640x480-60 VESA */
+	{ "640x480@60",  60,  640, 480,  25175000,  48, 16, 34, 10,  96, 1,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 1 640x480-75 VESA */
+	{ "640x480@75",  75,  640, 480,  31500000, 120, 16, 18,  1,  64, 1,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 2 800x600-60 VESA */
+	{ "800x600@60",  60,  800, 600,  40000000,  88, 40, 26,  1, 128, 1,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 3 800x600-75 VESA */
+	{ "800x600@75",  75,  800, 600,  49500000, 160, 16, 23,  1,  80, 1,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 4 1024x768-60 VESA */
+	{ "1024x768@60", 60, 1024, 768,  65000000, 160, 24, 34,  3, 136, 1,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 5 1024x768-75 VESA */
+	{ "1024x768@75", 75, 1024, 768,  78750000, 176, 16, 30,  1,  96, 1,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 6 1280x960-60 VESA */
+	{ "1280x960@60", 60, 1280, 960, 108000000, 312, 96, 38,  1, 112, 1,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 7 1440x900-60 VESA */
+	{ "1440x900@60", 60, 1440, 900, 106500000, 232, 80, 30,  3, 152, 1,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 8 FIXME 9 1024x600-60 VESA UNTESTED */
+	{ "1024x600@60", 60, 1024, 600,  50650000, 160, 24, 26,  1, 136, 1,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 9 FIXME 10 1024x600-75 VESA UNTESTED */
+	{ "1024x600@75", 75, 1024, 600,  61500000, 176, 16, 23,  1,  96, 1,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+	/* 10 FIXME 11 1366x768-60 VESA UNTESTED */
+	{ "1366x768@60", 60, 1366, 768,  85500000, 256, 58, 18,  1,  112, 3,
+	  0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
+};
+
+static struct fb_var_screeninfo unifb_default = {
+	.xres =		640,
+	.yres =		480,
+	.xres_virtual =	640,
+	.yres_virtual =	480,
+	.bits_per_pixel = 16,
+	.red =		{ 11, 5, 0 },
+	.green =	{ 5,  6, 0 },
+	.blue =		{ 0,  5, 0 },
+	.activate =	FB_ACTIVATE_NOW,
+	.height =	-1,
+	.width =	-1,
+	.pixclock =	25175000,
+	.left_margin =	48,
+	.right_margin =	16,
+	.upper_margin =	33,
+	.lower_margin =	10,
+	.hsync_len =	96,
+	.vsync_len =	2,
+	.vmode =	FB_VMODE_NONINTERLACED,
+};
+
+static struct fb_fix_screeninfo unifb_fix = {
+	.id =		"UNIGFX FB",
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_TRUECOLOR,
+	.xpanstep =	1,
+	.ypanstep =	1,
+	.ywrapstep =	1,
+	.accel =	FB_ACCEL_NONE,
+};
+
+static void unifb_sync(struct fb_info *info)
+{
+	/* TODO: may, this can be replaced by interrupt */
+	int cnt;
+
+	for (cnt = 0; cnt < 0x10000000; cnt++) {
+		if (readl(UGE_COMMAND) & 0x1000000)
+			return;
+	}
+
+	if (cnt > 0x8000000)
+		dev_warn(info->device, "Warning: UniGFX GE time out ...\n");
+}
+
+static void unifb_prim_fillrect(struct fb_info *info,
+				const struct fb_fillrect *region)
+{
+	int awidth = region->width;
+	int aheight = region->height;
+	int m_iBpp = info->var.bits_per_pixel;
+	int screen_width = info->var.xres;
+	int src_sel = 1;	/* from fg_color */
+	int pat_sel = 1;
+	int src_x0 = 0;
+	int dst_x0 = region->dx;
+	int src_y0 = 0;
+	int dst_y0 = region->dy;
+	int rop_alpha_sel = 0;
+	int rop_alpha_code = 0xCC;
+	int x_dir = 1;
+	int y_dir = 1;
+	int alpha_r = 0;
+	int alpha_sel = 0;
+	int dst_pitch = screen_width * (m_iBpp / 8);
+	int dst_offset = dst_y0 * dst_pitch + dst_x0 * (m_iBpp / 8);
+	int src_pitch = screen_width * (m_iBpp / 8);
+	int src_offset = src_y0 * src_pitch + src_x0 * (m_iBpp / 8);
+	unsigned int command = 0;
+	int clip_region = 0;
+	int clip_en = 0;
+	int tp_en = 0;
+	int fg_color = 0;
+	int bottom = info->var.yres - 1;
+	int right = info->var.xres - 1;
+	int top = 0;
+
+	bottom = (bottom << 16) | right;
+	command = (rop_alpha_sel << 26) | (pat_sel << 18) | (src_sel << 16)
+		| (x_dir << 20) | (y_dir << 21) | (command << 24)
+		| (clip_region << 23) | (clip_en << 22) | (tp_en << 27);
+	src_pitch = (dst_pitch << 16) | src_pitch;
+	awidth = awidth | (aheight << 16);
+	alpha_r = ((rop_alpha_code & 0xff) << 8) | (alpha_r & 0xff)
+		| (alpha_sel << 16);
+	src_x0 = (src_x0 & 0x1fff) | ((src_y0 & 0x1fff) << 16);
+	dst_x0 = (dst_x0 & 0x1fff) | ((dst_y0 & 0x1fff) << 16);
+	fg_color = region->color;
+
+	unifb_sync(info);
+
+	writel(((u32 *)(info->pseudo_palette))[fg_color], UGE_FCOLOR);
+	writel(0, UGE_BCOLOR);
+	writel(src_pitch, UGE_PITCH);
+	writel(src_offset, UGE_SRCSTART);
+	writel(dst_offset, UGE_DSTSTART);
+	writel(awidth, UGE_WIDHEIGHT);
+	writel(top, UGE_CLIP0);
+	writel(bottom, UGE_CLIP1);
+	writel(alpha_r, UGE_ROPALPHA);
+	writel(src_x0, UGE_SRCXY);
+	writel(dst_x0, UGE_DSTXY);
+	writel(command, UGE_COMMAND);
+}
+
+static void unifb_fillrect(struct fb_info *info,
+		const struct fb_fillrect *region)
+{
+	struct fb_fillrect modded;
+	int vxres, vyres;
+
+	if (info->flags & FBINFO_HWACCEL_DISABLED) {
+		sys_fillrect(info, region);
+		return;
+	}
+
+	vxres = info->var.xres_virtual;
+	vyres = info->var.yres_virtual;
+
+	memcpy(&modded, region, sizeof(struct fb_fillrect));
+
+	if (!modded.width || !modded.height ||
+	    modded.dx >= vxres || modded.dy >= vyres)
+		return;
+
+	if (modded.dx + modded.width > vxres)
+		modded.width = vxres - modded.dx;
+	if (modded.dy + modded.height > vyres)
+		modded.height = vyres - modded.dy;
+
+	unifb_prim_fillrect(info, &modded);
+}
+
+static void unifb_prim_copyarea(struct fb_info *info,
+				const struct fb_copyarea *area)
+{
+	int awidth = area->width;
+	int aheight = area->height;
+	int m_iBpp = info->var.bits_per_pixel;
+	int screen_width = info->var.xres;
+	int src_sel = 2;	/* from mem */
+	int pat_sel = 0;
+	int src_x0 = area->sx;
+	int dst_x0 = area->dx;
+	int src_y0 = area->sy;
+	int dst_y0 = area->dy;
+
+	int rop_alpha_sel = 0;
+	int rop_alpha_code = 0xCC;
+	int x_dir = 1;
+	int y_dir = 1;
+
+	int alpha_r = 0;
+	int alpha_sel = 0;
+	int dst_pitch = screen_width * (m_iBpp / 8);
+	int dst_offset = dst_y0 * dst_pitch + dst_x0 * (m_iBpp / 8);
+	int src_pitch = screen_width * (m_iBpp / 8);
+	int src_offset = src_y0 * src_pitch + src_x0 * (m_iBpp / 8);
+	unsigned int command = 0;
+	int clip_region = 0;
+	int clip_en = 1;
+	int tp_en = 0;
+	int top = 0;
+	int bottom = info->var.yres;
+	int right = info->var.xres;
+	int fg_color = 0;
+	int bg_color = 0;
+
+	if (src_x0 < 0)
+		src_x0 = 0;
+	if (src_y0 < 0)
+		src_y0 = 0;
+
+	if (src_y0 - dst_y0 > 0) {
+		y_dir = 1;
+	} else {
+		y_dir = 0;
+		src_offset = (src_y0 + aheight) * src_pitch +
+				src_x0 * (m_iBpp / 8);
+		dst_offset = (dst_y0 + aheight) * dst_pitch +
+				dst_x0 * (m_iBpp / 8);
+		src_y0 += aheight;
+		dst_y0 += aheight;
+	}
+
+	command = (rop_alpha_sel << 26) | (pat_sel << 18) | (src_sel << 16) |
+		(x_dir << 20) | (y_dir << 21) | (command << 24) |
+		(clip_region << 23) | (clip_en << 22) | (tp_en << 27);
+	src_pitch = (dst_pitch << 16) | src_pitch;
+	awidth = awidth | (aheight << 16);
+	alpha_r = ((rop_alpha_code & 0xff) << 8) | (alpha_r & 0xff) |
+		(alpha_sel << 16);
+	src_x0 = (src_x0 & 0x1fff) | ((src_y0 & 0x1fff) << 16);
+	dst_x0 = (dst_x0 & 0x1fff) | ((dst_y0 & 0x1fff) << 16);
+	bottom = (bottom << 16) | right;
+
+	unifb_sync(info);
+
+	writel(src_pitch, UGE_PITCH);
+	writel(src_offset, UGE_SRCSTART);
+	writel(dst_offset, UGE_DSTSTART);
+	writel(awidth, UGE_WIDHEIGHT);
+	writel(top, UGE_CLIP0);
+	writel(bottom, UGE_CLIP1);
+	writel(bg_color, UGE_BCOLOR);
+	writel(fg_color, UGE_FCOLOR);
+	writel(alpha_r, UGE_ROPALPHA);
+	writel(src_x0, UGE_SRCXY);
+	writel(dst_x0, UGE_DSTXY);
+	writel(command, UGE_COMMAND);
+}
+
+static void unifb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
+{
+	struct fb_copyarea modded;
+	u32 vxres, vyres;
+	modded.sx = area->sx;
+	modded.sy = area->sy;
+	modded.dx = area->dx;
+	modded.dy = area->dy;
+	modded.width = area->width;
+	modded.height = area->height;
+
+	if (info->flags & FBINFO_HWACCEL_DISABLED) {
+		sys_copyarea(info, area);
+		return;
+	}
+
+	vxres = info->var.xres_virtual;
+	vyres = info->var.yres_virtual;
+
+	if (!modded.width || !modded.height ||
+	    modded.sx >= vxres || modded.sy >= vyres ||
+	    modded.dx >= vxres || modded.dy >= vyres)
+		return;
+
+	if (modded.sx + modded.width > vxres)
+		modded.width = vxres - modded.sx;
+	if (modded.dx + modded.width > vxres)
+		modded.width = vxres - modded.dx;
+	if (modded.sy + modded.height > vyres)
+		modded.height = vyres - modded.sy;
+	if (modded.dy + modded.height > vyres)
+		modded.height = vyres - modded.dy;
+
+	unifb_prim_copyarea(info, &modded);
+}
+
+static void unifb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+	sys_imageblit(info, image);
+}
+
+static u_long get_line_length(int xres_virtual, int bpp)
+{
+	u_long length;
+
+	length = xres_virtual * bpp;
+	length = (length + 31) & ~31;
+	length >>= 3;
+	return length;
+}
+
+/*
+ *  Setting the video mode has been split into two parts.
+ *  First part, xxxfb_check_var, must not write anything
+ *  to hardware, it should only verify and adjust var.
+ *  This means it doesn't alter par but it does use hardware
+ *  data from it to check this var.
+ */
+static int unifb_check_var(struct fb_var_screeninfo *var,
+			 struct fb_info *info)
+{
+	u_long line_length;
+
+	/*
+	 *  FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
+	 *  as FB_VMODE_SMOOTH_XPAN is only used internally
+	 */
+
+	if (var->vmode & FB_VMODE_CONUPDATE) {
+		var->vmode |= FB_VMODE_YWRAP;
+		var->xoffset = info->var.xoffset;
+		var->yoffset = info->var.yoffset;
+	}
+
+	/*
+	 *  Some very basic checks
+	 */
+	if (!var->xres)
+		var->xres = 1;
+	if (!var->yres)
+		var->yres = 1;
+	if (var->xres > var->xres_virtual)
+		var->xres_virtual = var->xres;
+	if (var->yres > var->yres_virtual)
+		var->yres_virtual = var->yres;
+	if (var->bits_per_pixel <= 1)
+		var->bits_per_pixel = 1;
+	else if (var->bits_per_pixel <= 8)
+		var->bits_per_pixel = 8;
+	else if (var->bits_per_pixel <= 16)
+		var->bits_per_pixel = 16;
+	else if (var->bits_per_pixel <= 24)
+		var->bits_per_pixel = 24;
+	else if (var->bits_per_pixel <= 32)
+		var->bits_per_pixel = 32;
+	else
+		return -EINVAL;
+
+	if (var->xres_virtual < var->xoffset + var->xres)
+		var->xres_virtual = var->xoffset + var->xres;
+	if (var->yres_virtual < var->yoffset + var->yres)
+		var->yres_virtual = var->yoffset + var->yres;
+
+	/*
+	 *  Memory limit
+	 */
+	line_length =
+	    get_line_length(var->xres_virtual, var->bits_per_pixel);
+	if (line_length * var->yres_virtual > UNIFB_MEMSIZE)
+		return -ENOMEM;
+
+	/*
+	 * Now that we checked it we alter var. The reason being is that the
+	 * video mode passed in might not work but slight changes to it might
+	 * make it work. This way we let the user know what is acceptable.
+	 */
+	switch (var->bits_per_pixel) {
+	case 1:
+	case 8:
+		var->red.offset = 0;
+		var->red.length = 8;
+		var->green.offset = 0;
+		var->green.length = 8;
+		var->blue.offset = 0;
+		var->blue.length = 8;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		break;
+	case 16:		/* RGBA 5551 */
+		if (var->transp.length) {
+			var->red.offset = 0;
+			var->red.length = 5;
+			var->green.offset = 5;
+			var->green.length = 5;
+			var->blue.offset = 10;
+			var->blue.length = 5;
+			var->transp.offset = 15;
+			var->transp.length = 1;
+		} else {	/* RGB 565 */
+			var->red.offset = 11;
+			var->red.length = 5;
+			var->green.offset = 5;
+			var->green.length = 6;
+			var->blue.offset = 0;
+			var->blue.length = 5;
+			var->transp.offset = 0;
+			var->transp.length = 0;
+		}
+		break;
+	case 24:		/* RGB 888 */
+		var->red.offset = 0;
+		var->red.length = 8;
+		var->green.offset = 8;
+		var->green.length = 8;
+		var->blue.offset = 16;
+		var->blue.length = 8;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		break;
+	case 32:		/* RGBA 8888 */
+		var->red.offset = 16;
+		var->red.length = 8;
+		var->green.offset = 8;
+		var->green.length = 8;
+		var->blue.offset = 0;
+		var->blue.length = 8;
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		break;
+	}
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.msb_right = 0;
+	var->transp.msb_right = 0;
+
+	return 0;
+}
+
+/*
+ * This routine actually sets the video mode. It's in here where we
+ * the hardware state info->par and fix which can be affected by the
+ * change in par. For this driver it doesn't do much.
+ */
+static int unifb_set_par(struct fb_info *info)
+{
+	int hTotal, vTotal, hSyncStart, hSyncEnd, vSyncStart, vSyncEnd;
+	int format;
+
+#ifdef CONFIG_PUV3_PM
+	struct clk *clk_vga;
+	u32 pixclk = 0;
+	int i;
+
+	for (i = 0; i <= 10; i++) {
+		if    (info->var.xres         == unifb_modes[i].xres
+		    && info->var.yres         == unifb_modes[i].yres
+		    && info->var.upper_margin == unifb_modes[i].upper_margin
+		    && info->var.lower_margin == unifb_modes[i].lower_margin
+		    && info->var.left_margin  == unifb_modes[i].left_margin
+		    && info->var.right_margin == unifb_modes[i].right_margin
+		    && info->var.hsync_len    == unifb_modes[i].hsync_len
+		    && info->var.vsync_len    == unifb_modes[i].vsync_len) {
+			pixclk = unifb_modes[i].pixclock;
+			break;
+		}
+	}
+
+	/* set clock rate */
+	clk_vga = clk_get(info->device, "VGA_CLK");
+	if (clk_vga == ERR_PTR(-ENOENT))
+		return -ENOENT;
+
+	if (pixclk != 0) {
+		if (clk_set_rate(clk_vga, pixclk)) { /* set clock failed */
+			info->fix = unifb_fix;
+			info->var = unifb_default;
+			if (clk_set_rate(clk_vga, unifb_default.pixclock))
+				return -EINVAL;
+		}
+	}
+#endif
+
+	info->fix.line_length = get_line_length(info->var.xres_virtual,
+						info->var.bits_per_pixel);
+
+	hSyncStart = info->var.xres + info->var.right_margin;
+	hSyncEnd = hSyncStart + info->var.hsync_len;
+	hTotal = hSyncEnd + info->var.left_margin;
+
+	vSyncStart = info->var.yres + info->var.lower_margin;
+	vSyncEnd = vSyncStart + info->var.vsync_len;
+	vTotal = vSyncEnd + info->var.upper_margin;
+
+	switch (info->var.bits_per_pixel) {
+	case 8:
+		format = UDE_CFG_DST8;
+		break;
+	case 16:
+		format = UDE_CFG_DST16;
+		break;
+	case 24:
+		format = UDE_CFG_DST24;
+		break;
+	case 32:
+		format = UDE_CFG_DST32;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(PKUNITY_UNIGFX_MMAP_BASE, UDE_FSA);
+	writel(info->var.yres, UDE_LS);
+	writel(get_line_length(info->var.xres,
+			info->var.bits_per_pixel) >> 3, UDE_PS);
+			/* >> 3 for hardware required. */
+	writel((hTotal << 16) | (info->var.xres), UDE_HAT);
+	writel(((hTotal - 1) << 16) | (info->var.xres - 1), UDE_HBT);
+	writel(((hSyncEnd - 1) << 16) | (hSyncStart - 1), UDE_HST);
+	writel((vTotal << 16) | (info->var.yres), UDE_VAT);
+	writel(((vTotal - 1) << 16) | (info->var.yres - 1), UDE_VBT);
+	writel(((vSyncEnd - 1) << 16) | (vSyncStart - 1), UDE_VST);
+	writel(UDE_CFG_GDEN_ENABLE | UDE_CFG_TIMEUP_ENABLE
+			| format | 0xC0000001, UDE_CFG);
+
+	return 0;
+}
+
+/*
+ *  Set a single color register. The values supplied are already
+ *  rounded down to the hardware's capabilities (according to the
+ *  entries in the var structure). Return != 0 for invalid regno.
+ */
+static int unifb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+			 u_int transp, struct fb_info *info)
+{
+	if (regno >= 256)	/* no. of hw registers */
+		return 1;
+
+	/* grayscale works only partially under directcolor */
+	if (info->var.grayscale) {
+		/* grayscale = 0.30*R + 0.59*G + 0.11*B */
+		red = green = blue =
+		    (red * 77 + green * 151 + blue * 28) >> 8;
+	}
+
+#define CNVT_TOHW(val, width) ((((val)<<(width))+0x7FFF-(val))>>16)
+	switch (info->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+	case FB_VISUAL_PSEUDOCOLOR:
+		red = CNVT_TOHW(red, info->var.red.length);
+		green = CNVT_TOHW(green, info->var.green.length);
+		blue = CNVT_TOHW(blue, info->var.blue.length);
+		transp = CNVT_TOHW(transp, info->var.transp.length);
+		break;
+	case FB_VISUAL_DIRECTCOLOR:
+		red = CNVT_TOHW(red, 8);	/* expect 8 bit DAC */
+		green = CNVT_TOHW(green, 8);
+		blue = CNVT_TOHW(blue, 8);
+		/* hey, there is bug in transp handling... */
+		transp = CNVT_TOHW(transp, 8);
+		break;
+	}
+#undef CNVT_TOHW
+	/* Truecolor has hardware independent palette */
+	if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+		u32 v;
+
+		if (regno >= 16)
+			return 1;
+
+		v = (red << info->var.red.offset) |
+		    (green << info->var.green.offset) |
+		    (blue << info->var.blue.offset) |
+		    (transp << info->var.transp.offset);
+		switch (info->var.bits_per_pixel) {
+		case 8:
+			break;
+		case 16:
+		case 24:
+		case 32:
+			((u32 *) (info->pseudo_palette))[regno] = v;
+			break;
+		default:
+			return 1;
+		}
+		return 0;
+	}
+	return 0;
+}
+
+/*
+ *  Pan or Wrap the Display
+ *
+ *  This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
+ */
+static int unifb_pan_display(struct fb_var_screeninfo *var,
+			   struct fb_info *info)
+{
+	if (var->vmode & FB_VMODE_YWRAP) {
+		if (var->yoffset < 0
+		    || var->yoffset >= info->var.yres_virtual
+		    || var->xoffset)
+			return -EINVAL;
+	} else {
+		if (var->xoffset + var->xres > info->var.xres_virtual ||
+		    var->yoffset + var->yres > info->var.yres_virtual)
+			return -EINVAL;
+	}
+	info->var.xoffset = var->xoffset;
+	info->var.yoffset = var->yoffset;
+	if (var->vmode & FB_VMODE_YWRAP)
+		info->var.vmode |= FB_VMODE_YWRAP;
+	else
+		info->var.vmode &= ~FB_VMODE_YWRAP;
+	return 0;
+}
+
+int unifb_mmap(struct fb_info *info,
+		    struct vm_area_struct *vma)
+{
+	unsigned long size = vma->vm_end - vma->vm_start;
+	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	unsigned long pos = info->fix.smem_start + offset;
+
+	if (offset + size > info->fix.smem_len)
+		return -EINVAL;
+
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	if (io_remap_pfn_range(vma, vma->vm_start, pos >> PAGE_SHIFT, size,
+				vma->vm_page_prot))
+		return -EAGAIN;
+
+	vma->vm_flags |= VM_RESERVED;	/* avoid to swap out this VMA */
+	return 0;
+
+}
+
+static struct fb_ops unifb_ops = {
+	.fb_read        = fb_sys_read,
+	.fb_write       = fb_sys_write,
+	.fb_check_var	= unifb_check_var,
+	.fb_set_par	= unifb_set_par,
+	.fb_setcolreg	= unifb_setcolreg,
+	.fb_pan_display	= unifb_pan_display,
+	.fb_fillrect	= unifb_fillrect,
+	.fb_copyarea	= unifb_copyarea,
+	.fb_imageblit   = unifb_imageblit,
+	.fb_mmap	= unifb_mmap,
+};
+
+/*
+ *  Initialisation
+ */
+static int unifb_probe(struct platform_device *dev)
+{
+	struct fb_info *info;
+	u32 unifb_regs[UNIFB_REGS_NUM];
+	int retval = -ENOMEM;
+	struct resource *iomem, *mapmem;
+
+	info = framebuffer_alloc(sizeof(u32)*256, &dev->dev);
+	if (!info)
+		goto err;
+
+	info->screen_base = (char __iomem *)KUSER_UNIGFX_BASE;
+	info->fbops = &unifb_ops;
+
+	retval = fb_find_mode(&info->var, info, NULL,
+			      unifb_modes, 10, &unifb_modes[0], 16);
+
+	if (!retval || (retval == 4))
+		info->var = unifb_default;
+
+	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	unifb_fix.mmio_start = iomem->start;
+
+	mapmem = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	unifb_fix.smem_start = mapmem->start;
+	unifb_fix.smem_len = UNIFB_MEMSIZE;
+
+	info->fix = unifb_fix;
+	info->pseudo_palette = info->par;
+	info->par = NULL;
+	info->flags = FBINFO_FLAG_DEFAULT;
+#ifdef FB_ACCEL_PUV3_UNIGFX
+	info->fix.accel = FB_ACCEL_PUV3_UNIGFX;
+#endif
+
+	retval = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (retval < 0)
+		goto err1;
+
+	retval = register_framebuffer(info);
+	if (retval < 0)
+		goto err2;
+	platform_set_drvdata(dev, info);
+	platform_device_add_data(dev, unifb_regs, sizeof(u32) * UNIFB_REGS_NUM);
+
+	printk(KERN_INFO
+	       "fb%d: Virtual frame buffer device, using %dM of video memory\n",
+	       info->node, UNIFB_MEMSIZE >> 20);
+	return 0;
+err2:
+	fb_dealloc_cmap(&info->cmap);
+err1:
+	framebuffer_release(info);
+err:
+	return retval;
+}
+
+static int unifb_remove(struct platform_device *dev)
+{
+	struct fb_info *info = platform_get_drvdata(dev);
+
+	if (info) {
+		unregister_framebuffer(info);
+		fb_dealloc_cmap(&info->cmap);
+		framebuffer_release(info);
+	}
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int unifb_resume(struct platform_device *dev)
+{
+	int rc = 0;
+	u32 *unifb_regs = dev->dev.platform_data;
+
+	if (dev->dev.power.power_state.event == PM_EVENT_ON)
+		return 0;
+
+	console_lock();
+
+	if (dev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+		writel(unifb_regs[0], UDE_FSA);
+		writel(unifb_regs[1], UDE_LS);
+		writel(unifb_regs[2], UDE_PS);
+		writel(unifb_regs[3], UDE_HAT);
+		writel(unifb_regs[4], UDE_HBT);
+		writel(unifb_regs[5], UDE_HST);
+		writel(unifb_regs[6], UDE_VAT);
+		writel(unifb_regs[7], UDE_VBT);
+		writel(unifb_regs[8], UDE_VST);
+		writel(unifb_regs[9], UDE_CFG);
+	}
+	dev->dev.power.power_state = PMSG_ON;
+
+	console_unlock();
+
+	return rc;
+}
+
+static int unifb_suspend(struct platform_device *dev, pm_message_t mesg)
+{
+	u32 *unifb_regs = dev->dev.platform_data;
+
+	unifb_regs[0] = readl(UDE_FSA);
+	unifb_regs[1] = readl(UDE_LS);
+	unifb_regs[2] = readl(UDE_PS);
+	unifb_regs[3] = readl(UDE_HAT);
+	unifb_regs[4] = readl(UDE_HBT);
+	unifb_regs[5] = readl(UDE_HST);
+	unifb_regs[6] = readl(UDE_VAT);
+	unifb_regs[7] = readl(UDE_VBT);
+	unifb_regs[8] = readl(UDE_VST);
+	unifb_regs[9] = readl(UDE_CFG);
+
+	if (mesg.event == dev->dev.power.power_state.event)
+		return 0;
+
+	switch (mesg.event) {
+	case PM_EVENT_FREEZE:		/* about to take snapshot */
+	case PM_EVENT_PRETHAW:		/* before restoring snapshot */
+		goto done;
+	}
+
+	console_lock();
+
+	/* do nothing... */
+
+	console_unlock();
+
+done:
+	dev->dev.power.power_state = mesg;
+
+	return 0;
+}
+#else
+#define	unifb_resume	NULL
+#define unifb_suspend	NULL
+#endif
+
+static struct platform_driver unifb_driver = {
+	.probe	 = unifb_probe,
+	.remove  = unifb_remove,
+	.resume  = unifb_resume,
+	.suspend = unifb_suspend,
+	.driver  = {
+		.name	= "PKUnity-v3-UNIGFX",
+	},
+};
+
+static int __init unifb_init(void)
+{
+#ifndef MODULE
+	if (fb_get_options("unifb", NULL))
+		return -ENODEV;
+#endif
+
+	return platform_driver_register(&unifb_driver);
+}
+
+module_init(unifb_init);
+
+static void __exit unifb_exit(void)
+{
+	platform_driver_unregister(&unifb_driver);
+}
+
+module_exit(unifb_exit);
+
+MODULE_LICENSE("GPL v2");