mmc: sdhci: Disable ADMA on some O2Micro SD/MMC parts.

This patch disables the broken ADMA on selected O2Micro devices.

Signed-off-by: Jennifer Li <Jennifer.li@o2micro.com>
Reviewed-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

1 files changed, 112 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 3d9c2460d43..831cf91b644 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -176,6 +176,74 @@ static const struct sdhci_pci_fixes sdhci_intel_mfd_emmc_sdio = {
 	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 };
 
+/* O2Micro extra registers */
+#define O2_SD_LOCK_WP		0xD3
+#define O2_SD_MULTI_VCC3V	0xEE
+#define O2_SD_CLKREQ		0xEC
+#define O2_SD_CAPS		0xE0
+#define O2_SD_ADMA1		0xE2
+#define O2_SD_ADMA2		0xE7
+#define O2_SD_INF_MOD		0xF1
+
+static int o2_probe(struct sdhci_pci_chip *chip)
+{
+	int ret;
+	u8 scratch;
+
+	switch (chip->pdev->device) {
+	case PCI_DEVICE_ID_O2_8220:
+	case PCI_DEVICE_ID_O2_8221:
+	case PCI_DEVICE_ID_O2_8320:
+	case PCI_DEVICE_ID_O2_8321:
+		/* This extra setup is required due to broken ADMA. */
+		ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+		scratch &= 0x7f;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+		/* Set Multi 3 to VCC3V# */
+		pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
+
+		/* Disable CLK_REQ# support after media DET */
+		ret = pci_read_config_byte(chip->pdev, O2_SD_CLKREQ, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x20;
+		pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
+
+		/* Choose capabilities, enable SDMA.  We have to write 0x01
+		 * to the capabilities register first to unlock it.
+		 */
+		ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x01;
+		pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
+		pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
+
+		/* Disable ADMA1/2 */
+		pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
+		pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
+
+		/* Disable the infinite transfer mode */
+		ret = pci_read_config_byte(chip->pdev, O2_SD_INF_MOD, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x08;
+		pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
+
+		/* Lock WP */
+		ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x80;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+	}
+
+	return 0;
+}
+
 static int jmicron_pmos(struct sdhci_pci_chip *chip, int on)
 {
 	u8 scratch;
@@ -339,6 +407,10 @@ static int jmicron_resume(struct sdhci_pci_chip *chip)
 	return 0;
 }
 
+static const struct sdhci_pci_fixes sdhci_o2 = {
+	.probe		= o2_probe,
+};
+
 static const struct sdhci_pci_fixes sdhci_jmicron = {
 	.probe		= jmicron_probe,
 
@@ -589,6 +661,46 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 		.driver_data	= (kernel_ulong_t)&sdhci_intel_mfd_emmc_sdio,
 	},
 
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_8120,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_8220,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_8221,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_8320,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_8321,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
 	{	/* Generic SD host controller */
 		PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
 	},