Merge branch 'next' into for-linus

Conflicts:
	include/linux/input.h

54 files changed, 2767 insertions, 717 deletions

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 3052e2969ad..401acecc7f3 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -154,7 +154,8 @@ config HID_EGALAX
 	tristate "eGalax multi-touch panel"
 	depends on USB_HID
 	---help---
-	Support for the eGalax dual-touch panel.
+	Support for the eGalax dual-touch panels, including the
+	Joojoo and Wetab tablets.
 
 config HID_ELECOM
 	tristate "ELECOM BM084 bluetooth mouse"
diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c
index 02d8cd3b1b1..4fb7c7528d1 100644
--- a/drivers/hid/hid-3m-pct.c
+++ b/drivers/hid/hid-3m-pct.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
+#include <linux/input/mt.h>
 
 MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
 MODULE_DESCRIPTION("3M PCT multitouch panels");
@@ -27,8 +28,6 @@ MODULE_LICENSE("GPL");
 #include "hid-ids.h"
 
 #define MAX_SLOTS		60
-#define MAX_TRKID		USHRT_MAX
-#define MAX_EVENTS		360
 
 /* estimated signal-to-noise ratios */
 #define SN_MOVE			2048
@@ -36,14 +35,11 @@ MODULE_LICENSE("GPL");
 
 struct mmm_finger {
 	__s32 x, y, w, h;
-	__u16 id;
-	bool prev_touch;
 	bool touch, valid;
 };
 
 struct mmm_data {
 	struct mmm_finger f[MAX_SLOTS];
-	__u16 id;
 	__u8 curid;
 	__u8 nexp, nreal;
 	bool touch, valid;
@@ -117,14 +113,7 @@ static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 					0, 1, 0, 0);
 			return 1;
 		case HID_DG_CONTACTID:
-			field->logical_maximum = MAX_TRKID;
-			hid_map_usage(hi, usage, bit, max,
-					EV_ABS, ABS_MT_TRACKING_ID);
-			input_set_abs_params(hi->input, ABS_MT_TRACKING_ID,
-					     0, MAX_TRKID, 0, 0);
-			if (!hi->input->mt)
-				input_mt_create_slots(hi->input, MAX_SLOTS);
-			input_set_events_per_packet(hi->input, MAX_EVENTS);
+			input_mt_init_slots(hi->input, MAX_SLOTS);
 			return 1;
 		}
 		/* let hid-input decide for the others */
@@ -154,7 +143,6 @@ static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi,
  */
 static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
 {
-	struct mmm_finger *oldest = 0;
 	int i;
 	for (i = 0; i < MAX_SLOTS; ++i) {
 		struct mmm_finger *f = &md->f[i];
@@ -163,6 +151,7 @@ static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
 			continue;
 		}
 		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, f->touch);
 		if (f->touch) {
 			/* this finger is on the screen */
 			int wide = (f->w > f->h);
@@ -170,33 +159,16 @@ static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
 			int major = max(f->w, f->h) >> 1;
 			int minor = min(f->w, f->h) >> 1;
 
-			if (!f->prev_touch)
-				f->id = md->id++;
-			input_event(input, EV_ABS, ABS_MT_TRACKING_ID, f->id);
 			input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x);
 			input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y);
 			input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
 			input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
 			input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
-			/* touchscreen emulation: pick the oldest contact */
-			if (!oldest || ((f->id - oldest->id) & (SHRT_MAX + 1)))
-				oldest = f;
-		} else {
-			/* this finger took off the screen */
-			input_event(input, EV_ABS, ABS_MT_TRACKING_ID, -1);
 		}
-		f->prev_touch = f->touch;
 		f->valid = 0;
 	}
 
-	/* touchscreen emulation */
-	if (oldest) {
-		input_event(input, EV_KEY, BTN_TOUCH, 1);
-		input_event(input, EV_ABS, ABS_X, oldest->x);
-		input_event(input, EV_ABS, ABS_Y, oldest->y);
-	} else {
-		input_event(input, EV_KEY, BTN_TOUCH, 0);
-	}
+	input_mt_report_pointer_emulation(input, true);
 	input_sync(input);
 }
 
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 515345b11ac..88668ae9694 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1300,6 +1300,9 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c
index 54b017ad258..16566fcc08a 100644
--- a/drivers/hid/hid-egalax.c
+++ b/drivers/hid/hid-egalax.c
@@ -2,6 +2,8 @@
  *  HID driver for eGalax dual-touch panels
  *
  *  Copyright (c) 2010 Stephane Chatty <chatty@enac.fr>
+ *  Copyright (c) 2010 Henrik Rydberg <rydberg@euromail.se>
+ *  Copyright (c) 2010 Canonical, Ltd.
  *
  */
 
@@ -16,6 +18,7 @@
 #include <linux/hid.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/input/mt.h>
 #include <linux/slab.h>
 #include "usbhid/usbhid.h"
 
@@ -25,38 +28,53 @@ MODULE_LICENSE("GPL");
 
 #include "hid-ids.h"
 
+#define MAX_SLOTS		2
+
+/* estimated signal-to-noise ratios */
+#define SN_MOVE			4096
+#define SN_PRESSURE		32
+
 struct egalax_data {
-	__u16 x, y, z;
-	__u8 id;
-	bool first;		/* is this the first finger in the frame? */
-	bool valid;		/* valid finger data, or just placeholder? */
-	bool activity;		/* at least one active finger previously? */
-	__u16 lastx, lasty, lastz;	/* latest valid (x, y, z) in the frame */
+	int valid;
+	int slot;
+	int touch;
+	int x, y, z;
 };
 
+static void set_abs(struct input_dev *input, unsigned int code,
+		    struct hid_field *field, int snratio)
+{
+	int fmin = field->logical_minimum;
+	int fmax = field->logical_maximum;
+	int fuzz = snratio ? (fmax - fmin) / snratio : 0;
+	input_set_abs_params(input, code, fmin, fmax, fuzz, 0);
+}
+
 static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
+	struct input_dev *input = hi->input;
+
 	switch (usage->hid & HID_USAGE_PAGE) {
 
 	case HID_UP_GENDESK:
 		switch (usage->hid) {
 		case HID_GD_X:
+			field->logical_maximum = 32760;
 			hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_POSITION_X);
+			set_abs(input, ABS_MT_POSITION_X, field, SN_MOVE);
 			/* touchscreen emulation */
-			input_set_abs_params(hi->input, ABS_X,
-						field->logical_minimum,
-						field->logical_maximum, 0, 0);
+			set_abs(input, ABS_X, field, SN_MOVE);
 			return 1;
 		case HID_GD_Y:
+			field->logical_maximum = 32760;
 			hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_POSITION_Y);
+			set_abs(input, ABS_MT_POSITION_Y, field, SN_MOVE);
 			/* touchscreen emulation */
-			input_set_abs_params(hi->input, ABS_Y,
-						field->logical_minimum,
-						field->logical_maximum, 0, 0);
+			set_abs(input, ABS_Y, field, SN_MOVE);
 			return 1;
 		}
 		return 0;
@@ -66,6 +84,7 @@ static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		case HID_DG_TIPSWITCH:
 			/* touchscreen emulation */
 			hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+			input_set_capability(input, EV_KEY, BTN_TOUCH);
 			return 1;
 		case HID_DG_INRANGE:
 		case HID_DG_CONFIDENCE:
@@ -73,16 +92,15 @@ static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		case HID_DG_CONTACTMAX:
 			return -1;
 		case HID_DG_CONTACTID:
-			hid_map_usage(hi, usage, bit, max,
-					EV_ABS, ABS_MT_TRACKING_ID);
+			input_mt_init_slots(input, MAX_SLOTS);
 			return 1;
 		case HID_DG_TIPPRESSURE:
+			field->logical_minimum = 0;
 			hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_PRESSURE);
+			set_abs(input, ABS_MT_PRESSURE, field, SN_PRESSURE);
 			/* touchscreen emulation */
-			input_set_abs_params(hi->input, ABS_PRESSURE,
-						field->logical_minimum,
-						field->logical_maximum, 0, 0);
+			set_abs(input, ABS_PRESSURE, field, SN_PRESSURE);
 			return 1;
 		}
 		return 0;
@@ -96,10 +114,10 @@ static int egalax_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
+	/* tell hid-input to skip setup of these event types */
 	if (usage->type == EV_KEY || usage->type == EV_ABS)
-		clear_bit(usage->code, *bit);
-
-	return 0;
+		set_bit(usage->type, hi->input->evbit);
+	return -1;
 }
 
 /*
@@ -108,58 +126,16 @@ static int egalax_input_mapped(struct hid_device *hdev, struct hid_input *hi,
  */
 static void egalax_filter_event(struct egalax_data *td, struct input_dev *input)
 {
-	td->first = !td->first; /* touchscreen emulation */
-
-	if (td->valid) {
-		/* emit multitouch events */
-		input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
-		input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x >> 3);
-		input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y >> 3);
+	input_mt_slot(input, td->slot);
+	input_mt_report_slot_state(input, MT_TOOL_FINGER, td->touch);
+	if (td->touch) {
+		input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+		input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
 		input_event(input, EV_ABS, ABS_MT_PRESSURE, td->z);
-
-		input_mt_sync(input);
-
-		/*
-		 * touchscreen emulation: store (x, y) as
-		 * the last valid values in this frame
-		 */
-		td->lastx = td->x;
-		td->lasty = td->y;
-		td->lastz = td->z;
-	}
-
-	/*
-	 * touchscreen emulation: if this is the second finger and at least
-	 * one in this frame is valid, the latest valid in the frame is
-	 * the oldest on the panel, the one we want for single touch
-	 */
-	if (!td->first && td->activity) {
-		input_event(input, EV_ABS, ABS_X, td->lastx >> 3);
-		input_event(input, EV_ABS, ABS_Y, td->lasty >> 3);
- 		input_event(input, EV_ABS, ABS_PRESSURE, td->lastz);
-	}
-
-	if (!td->valid) {
-		/*
-		 * touchscreen emulation: if the first finger is invalid
-		 * and there previously was finger activity, this is a release
-		 */ 
-		if (td->first && td->activity) {
-			input_event(input, EV_KEY, BTN_TOUCH, 0);
-			td->activity = false;
-		}
-		return;
-	}
-
-
-	/* touchscreen emulation: if no previous activity, emit touch event */
-	if (!td->activity) {
-		input_event(input, EV_KEY, BTN_TOUCH, 1);
-		td->activity = true;
 	}
+	input_mt_report_pointer_emulation(input, true);
 }
 
-
 static int egalax_event(struct hid_device *hid, struct hid_field *field,
 				struct hid_usage *usage, __s32 value)
 {
@@ -169,25 +145,26 @@ static int egalax_event(struct hid_device *hid, struct hid_field *field,
 	 * uses a standard parallel multitouch protocol (product ID ==
 	 * 48xx).  The second is capacitive and uses an unusual "serial"
 	 * protocol with a different message for each multitouch finger
-	 * (product ID == 72xx).  We do not yet generate a correct event
-	 * sequence for the capacitive/serial protocol.
+	 * (product ID == 72xx).
 	 */
 	if (hid->claimed & HID_CLAIMED_INPUT) {
 		struct input_dev *input = field->hidinput->input;
 
 		switch (usage->hid) {
 		case HID_DG_INRANGE:
+			td->valid = value;
+			break;
 		case HID_DG_CONFIDENCE:
 			/* avoid interference from generic hidinput handling */
 			break;
 		case HID_DG_TIPSWITCH:
-			td->valid = value;
+			td->touch = value;
 			break;
 		case HID_DG_TIPPRESSURE:
 			td->z = value;
 			break;
 		case HID_DG_CONTACTID:
-			td->id = value;
+			td->slot = clamp_val(value, 0, MAX_SLOTS - 1);
 			break;
 		case HID_GD_X:
 			td->x = value;
@@ -195,11 +172,11 @@ static int egalax_event(struct hid_device *hid, struct hid_field *field,
 		case HID_GD_Y:
 			td->y = value;
 			/* this is the last field in a finger */
-			egalax_filter_event(td, input);
+			if (td->valid)
+				egalax_filter_event(td, input);
 			break;
 		case HID_DG_CONTACTCOUNT:
 			/* touch emulation: this is the last field in a frame */
-			td->first = false;
 			break;
 
 		default:
@@ -261,6 +238,12 @@ static const struct hid_device_id egalax_devices[] = {
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, egalax_devices);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 3341baa86a3..0f150c72da7 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -196,6 +196,9 @@
 #define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER	0x0001
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH	0x480d
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1	0x720c
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2	0x72a1
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3	0x480e
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4	0x726b
 
 #define USB_VENDOR_ID_ELECOM		0x056e
 #define USB_DEVICE_ID_ELECOM_BM084	0x0061
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 7ad212d31f9..09614ce7496 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -5,7 +5,7 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_INPUT)		+= input-core.o
-input-core-objs := input.o input-compat.o ff-core.o
+input-core-y := input.o input-compat.o input-mt.o ff-core.o
 
 obj-$(CONFIG_INPUT_FF_MEMLESS)	+= ff-memless.o
 obj-$(CONFIG_INPUT_POLLDEV)	+= input-polldev.o
diff --git a/drivers/input/apm-power.c b/drivers/input/apm-power.c
index 7d61a966080..e90ee3d3061 100644
--- a/drivers/input/apm-power.c
+++ b/drivers/input/apm-power.c
@@ -9,6 +9,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/input.h>
 #include <linux/slab.h>
@@ -23,8 +25,7 @@ static void system_power_event(unsigned int keycode)
 	switch (keycode) {
 	case KEY_SUSPEND:
 		apm_queue_event(APM_USER_SUSPEND);
-
-		printk(KERN_INFO "apm-power: Requesting system suspend...\n");
+		pr_info("Requesting system suspend...\n");
 		break;
 	default:
 		break;
@@ -65,18 +66,15 @@ static int apmpower_connect(struct input_handler *handler,
 
 	error = input_register_handle(handle);
 	if (error) {
-		printk(KERN_ERR
-			"apm-power: Failed to register input power handler, "
-			"error %d\n", error);
+		pr_err("Failed to register input power handler, error %d\n",
+		       error);
 		kfree(handle);
 		return error;
 	}
 
 	error = input_open_device(handle);
 	if (error) {
-		printk(KERN_ERR
-			"apm-power: Failed to open input power device, "
-			"error %d\n", error);
+		pr_err("Failed to open input power device, error %d\n", error);
 		input_unregister_handle(handle);
 		kfree(handle);
 		return error;
diff --git a/drivers/input/evbug.c b/drivers/input/evbug.c
index f7c5c14ec12..cd4e6679d61 100644
--- a/drivers/input/evbug.c
+++ b/drivers/input/evbug.c
@@ -26,6 +26,8 @@
  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/input.h>
@@ -38,8 +40,8 @@ MODULE_LICENSE("GPL");
 
 static void evbug_event(struct input_handle *handle, unsigned int type, unsigned int code, int value)
 {
-	printk(KERN_DEBUG "evbug.c: Event. Dev: %s, Type: %d, Code: %d, Value: %d\n",
-		dev_name(&handle->dev->dev), type, code, value);
+	printk(KERN_DEBUG pr_fmt("Event. Dev: %s, Type: %d, Code: %d, Value: %d\n"),
+	       dev_name(&handle->dev->dev), type, code, value);
 }
 
 static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
@@ -64,10 +66,10 @@ static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
 	if (error)
 		goto err_unregister_handle;
 
-	printk(KERN_DEBUG "evbug.c: Connected device: %s (%s at %s)\n",
-		dev_name(&dev->dev),
-		dev->name ?: "unknown",
-		dev->phys ?: "unknown");
+	printk(KERN_DEBUG pr_fmt("Connected device: %s (%s at %s)\n"),
+	       dev_name(&dev->dev),
+	       dev->name ?: "unknown",
+	       dev->phys ?: "unknown");
 
 	return 0;
 
@@ -80,8 +82,8 @@ static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
 
 static void evbug_disconnect(struct input_handle *handle)
 {
-	printk(KERN_DEBUG "evbug.c: Disconnected device: %s\n",
-		dev_name(&handle->dev->dev));
+	printk(KERN_DEBUG pr_fmt("Disconnected device: %s\n"),
+	       dev_name(&handle->dev->dev));
 
 	input_close_device(handle);
 	input_unregister_handle(handle);
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 68f09a86843..c8471a2552e 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -8,6 +8,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define EVDEV_MINOR_BASE	64
 #define EVDEV_MINORS		32
 #define EVDEV_MIN_BUFFER_SIZE	64U
@@ -522,12 +524,11 @@ static int handle_eviocgbit(struct input_dev *dev,
 	if (type == EV_KEY && size == OLD_KEY_MAX) {
 		len = OLD_KEY_MAX;
 		if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
-			printk(KERN_WARNING
-				"evdev.c(EVIOCGBIT): Suspicious buffer size %u, "
-				"limiting output to %zu bytes. See "
-				"http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
-				OLD_KEY_MAX,
-				BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
+			pr_warning("(EVIOCGBIT): Suspicious buffer size %u, "
+				   "limiting output to %zu bytes. See "
+				   "http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
+				   OLD_KEY_MAX,
+				   BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
 	}
 
 	return bits_to_user(bits, len, size, p, compat_mode);
@@ -686,6 +687,10 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 #define EVIOC_MASK_SIZE(nr)	((nr) & ~(_IOC_SIZEMASK << _IOC_SIZESHIFT))
 	switch (EVIOC_MASK_SIZE(cmd)) {
 
+	case EVIOCGPROP(0):
+		return bits_to_user(dev->propbit, INPUT_PROP_MAX,
+				    size, p, compat_mode);
+
 	case EVIOCGKEY(0):
 		return bits_to_user(dev->key, KEY_MAX, size, p, compat_mode);
 
@@ -897,7 +902,7 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
 			break;
 
 	if (minor == EVDEV_MINORS) {
-		printk(KERN_ERR "evdev: no more free evdev devices\n");
+		pr_err("no more free evdev devices\n");
 		return -ENFILE;
 	}
 
diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c
index 03078c08309..3367f760d75 100644
--- a/drivers/input/ff-core.c
+++ b/drivers/input/ff-core.c
@@ -23,7 +23,7 @@
 
 /* #define DEBUG */
 
-#define debug(format, arg...) pr_debug("ff-core: " format "\n", ## arg)
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
 
 #include <linux/input.h>
 #include <linux/module.h>
@@ -116,7 +116,7 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect,
 
 	if (effect->type < FF_EFFECT_MIN || effect->type > FF_EFFECT_MAX ||
 	    !test_bit(effect->type, dev->ffbit)) {
-		debug("invalid or not supported effect type in upload");
+		pr_debug("invalid or not supported effect type in upload\n");
 		return -EINVAL;
 	}
 
@@ -124,7 +124,7 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect,
 	    (effect->u.periodic.waveform < FF_WAVEFORM_MIN ||
 	     effect->u.periodic.waveform > FF_WAVEFORM_MAX ||
 	     !test_bit(effect->u.periodic.waveform, dev->ffbit))) {
-		debug("invalid or not supported wave form in upload");
+		pr_debug("invalid or not supported wave form in upload\n");
 		return -EINVAL;
 	}
 
@@ -246,7 +246,7 @@ static int flush_effects(struct input_dev *dev, struct file *file)
 	struct ff_device *ff = dev->ff;
 	int i;
 
-	debug("flushing now");
+	pr_debug("flushing now\n");
 
 	mutex_lock(&ff->mutex);
 
@@ -315,8 +315,7 @@ int input_ff_create(struct input_dev *dev, int max_effects)
 	int i;
 
 	if (!max_effects) {
-		printk(KERN_ERR
-		       "ff-core: cannot allocate device without any effects\n");
+		pr_err("cannot allocate device without any effects\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c
index 1d881c96ba8..117a59aaa70 100644
--- a/drivers/input/ff-memless.c
+++ b/drivers/input/ff-memless.c
@@ -23,7 +23,7 @@
 
 /* #define DEBUG */
 
-#define debug(format, arg...) pr_debug("ff-memless: " format "\n", ## arg)
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/slab.h>
 #include <linux/input.h>
@@ -129,7 +129,7 @@ static void ml_schedule_timer(struct ml_device *ml)
 	int events = 0;
 	int i;
 
-	debug("calculating next timer");
+	pr_debug("calculating next timer\n");
 
 	for (i = 0; i < FF_MEMLESS_EFFECTS; i++) {
 
@@ -149,10 +149,10 @@ static void ml_schedule_timer(struct ml_device *ml)
 	}
 
 	if (!events) {
-		debug("no actions");
+		pr_debug("no actions\n");
 		del_timer(&ml->timer);
 	} else {
-		debug("timer set");
+		pr_debug("timer set\n");
 		mod_timer(&ml->timer, earliest);
 	}
 }
@@ -173,8 +173,8 @@ static int apply_envelope(struct ml_effect_state *state, int value,
 	if (envelope->attack_length &&
 	    time_before(now,
 			state->play_at + msecs_to_jiffies(envelope->attack_length))) {
-		debug("value = 0x%x, attack_level = 0x%x", value,
-		      envelope->attack_level);
+		pr_debug("value = 0x%x, attack_level = 0x%x\n",
+			 value, envelope->attack_level);
 		time_from_level = jiffies_to_msecs(now - state->play_at);
 		time_of_envelope = envelope->attack_length;
 		envelope_level = min_t(__s16, envelope->attack_level, 0x7fff);
@@ -191,13 +191,13 @@ static int apply_envelope(struct ml_effect_state *state, int value,
 
 	difference = abs(value) - envelope_level;
 
-	debug("difference = %d", difference);
-	debug("time_from_level = 0x%x", time_from_level);
-	debug("time_of_envelope = 0x%x", time_of_envelope);
+	pr_debug("difference = %d\n", difference);
+	pr_debug("time_from_level = 0x%x\n", time_from_level);
+	pr_debug("time_of_envelope = 0x%x\n", time_of_envelope);
 
 	difference = difference * time_from_level / time_of_envelope;
 
-	debug("difference = %d", difference);
+	pr_debug("difference = %d\n", difference);
 
 	return value < 0 ?
 		-(difference + envelope_level) : (difference + envelope_level);
@@ -215,8 +215,7 @@ static int get_compatible_type(struct ff_device *ff, int effect_type)
 	if (effect_type == FF_PERIODIC && test_bit(FF_RUMBLE, ff->ffbit))
 		return FF_RUMBLE;
 
-	printk(KERN_ERR
-	       "ff-memless: invalid type in get_compatible_type()\n");
+	pr_err("invalid type in get_compatible_type()\n");
 
 	return 0;
 }
@@ -312,7 +311,7 @@ static void ml_combine_effects(struct ff_effect *effect,
 		break;
 
 	default:
-		printk(KERN_ERR "ff-memless: invalid type in ml_combine_effects()\n");
+		pr_err("invalid type in ml_combine_effects()\n");
 		break;
 	}
 
@@ -406,7 +405,7 @@ static void ml_effect_timer(unsigned long timer_data)
 	struct ml_device *ml = dev->ff->private;
 	unsigned long flags;
 
-	debug("timer: updating effects");
+	pr_debug("timer: updating effects\n");
 
 	spin_lock_irqsave(&dev->event_lock, flags);
 	ml_play_effects(ml);
@@ -438,7 +437,7 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value)
 	struct ml_effect_state *state = &ml->states[effect_id];
 
 	if (value > 0) {
-		debug("initiated play");
+		pr_debug("initiated play\n");
 
 		__set_bit(FF_EFFECT_STARTED, &state->flags);
 		state->count = value;
@@ -449,7 +448,7 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value)
 		state->adj_at = state->play_at;
 
 	} else {
-		debug("initiated stop");
+		pr_debug("initiated stop\n");
 
 		if (test_bit(FF_EFFECT_PLAYING, &state->flags))
 			__set_bit(FF_EFFECT_ABORTING, &state->flags);
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index 46239e47a26..dbf741c9583 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -18,13 +18,11 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/gameport.h>
-#include <linux/wait.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
-#include <linux/kthread.h>
+#include <linux/workqueue.h>
 #include <linux/sched.h>	/* HZ */
 #include <linux/mutex.h>
-#include <linux/freezer.h>
 
 /*#include <asm/io.h>*/
 
@@ -234,58 +232,22 @@ struct gameport_event {
 
 static DEFINE_SPINLOCK(gameport_event_lock);	/* protects gameport_event_list */
 static LIST_HEAD(gameport_event_list);
-static DECLARE_WAIT_QUEUE_HEAD(gameport_wait);
-static struct task_struct *gameport_task;
 
-static int gameport_queue_event(void *object, struct module *owner,
-				enum gameport_event_type event_type)
+static struct gameport_event *gameport_get_event(void)
 {
+	struct gameport_event *event = NULL;
 	unsigned long flags;
-	struct gameport_event *event;
-	int retval = 0;
 
 	spin_lock_irqsave(&gameport_event_lock, flags);
 
-	/*
-	 * Scan event list for the other events for the same gameport port,
-	 * starting with the most recent one. If event is the same we
-	 * do not need add new one. If event is of different type we
-	 * need to add this event and should not look further because
-	 * we need to preseve sequence of distinct events.
-	 */
-	list_for_each_entry_reverse(event, &gameport_event_list, node) {
-		if (event->object == object) {
-			if (event->type == event_type)
-				goto out;
-			break;
-		}
-	}
-
-	event = kmalloc(sizeof(struct gameport_event), GFP_ATOMIC);
-	if (!event) {
-		pr_err("Not enough memory to queue event %d\n", event_type);
-		retval = -ENOMEM;
-		goto out;
-	}
-
-	if (!try_module_get(owner)) {
-		pr_warning("Can't get module reference, dropping event %d\n",
-			   event_type);
-		kfree(event);
-		retval = -EINVAL;
-		goto out;
+	if (!list_empty(&gameport_event_list)) {
+		event = list_first_entry(&gameport_event_list,
+					 struct gameport_event, node);
+		list_del_init(&event->node);
 	}
 
-	event->type = event_type;
-	event->object = object;
-	event->owner = owner;
-
-	list_add_tail(&event->node, &gameport_event_list);
-	wake_up(&gameport_wait);
-
-out:
 	spin_unlock_irqrestore(&gameport_event_lock, flags);
-	return retval;
+	return event;
 }
 
 static void gameport_free_event(struct gameport_event *event)
@@ -319,24 +281,8 @@ static void gameport_remove_duplicate_events(struct gameport_event *event)
 	spin_unlock_irqrestore(&gameport_event_lock, flags);
 }
 
-static struct gameport_event *gameport_get_event(void)
-{
-	struct gameport_event *event = NULL;
-	unsigned long flags;
-
-	spin_lock_irqsave(&gameport_event_lock, flags);
-
-	if (!list_empty(&gameport_event_list)) {
-		event = list_first_entry(&gameport_event_list,
-					 struct gameport_event, node);
-		list_del_init(&event->node);
-	}
-
-	spin_unlock_irqrestore(&gameport_event_lock, flags);
-	return event;
-}
 
-static void gameport_handle_event(void)
+static void gameport_handle_events(struct work_struct *work)
 {
 	struct gameport_event *event;
 
@@ -368,6 +314,59 @@ static void gameport_handle_event(void)
 	mutex_unlock(&gameport_mutex);
 }
 
+static DECLARE_WORK(gameport_event_work, gameport_handle_events);
+
+static int gameport_queue_event(void *object, struct module *owner,
+				enum gameport_event_type event_type)
+{
+	unsigned long flags;
+	struct gameport_event *event;
+	int retval = 0;
+
+	spin_lock_irqsave(&gameport_event_lock, flags);
+
+	/*
+	 * Scan event list for the other events for the same gameport port,
+	 * starting with the most recent one. If event is the same we
+	 * do not need add new one. If event is of different type we
+	 * need to add this event and should not look further because
+	 * we need to preserve sequence of distinct events.
+	 */
+	list_for_each_entry_reverse(event, &gameport_event_list, node) {
+		if (event->object == object) {
+			if (event->type == event_type)
+				goto out;
+			break;
+		}
+	}
+
+	event = kmalloc(sizeof(struct gameport_event), GFP_ATOMIC);
+	if (!event) {
+		pr_err("Not enough memory to queue event %d\n", event_type);
+		retval = -ENOMEM;
+		goto out;
+	}
+
+	if (!try_module_get(owner)) {
+		pr_warning("Can't get module reference, dropping event %d\n",
+			   event_type);
+		kfree(event);
+		retval = -EINVAL;
+		goto out;
+	}
+
+	event->type = event_type;
+	event->object = object;
+	event->owner = owner;
+
+	list_add_tail(&event->node, &gameport_event_list);
+	schedule_work(&gameport_event_work);
+
+out:
+	spin_unlock_irqrestore(&gameport_event_lock, flags);
+	return retval;
+}
+
 /*
  * Remove all events that have been submitted for a given object,
  * be it a gameport port or a driver.
@@ -419,19 +418,6 @@ static struct gameport *gameport_get_pending_child(struct gameport *parent)
 	return child;
 }
 
-static int gameport_thread(void *nothing)
-{
-	set_freezable();
-	do {
-		gameport_handle_event();
-		wait_event_freezable(gameport_wait,
-			kthread_should_stop() || !list_empty(&gameport_event_list));
-	} while (!kthread_should_stop());
-
-	return 0;
-}
-
-
 /*
  * Gameport port operations
  */
@@ -814,13 +800,6 @@ static int __init gameport_init(void)
 		return error;
 	}
 
-	gameport_task = kthread_run(gameport_thread, NULL, "kgameportd");
-	if (IS_ERR(gameport_task)) {
-		bus_unregister(&gameport_bus);
-		error = PTR_ERR(gameport_task);
-		pr_err("Failed to start kgameportd, error: %d\n", error);
-		return error;
-	}
 
 	return 0;
 }
@@ -828,7 +807,12 @@ static int __init gameport_init(void)
 static void __exit gameport_exit(void)
 {
 	bus_unregister(&gameport_bus);
-	kthread_stop(gameport_task);
+
+	/*
+	 * There should not be any outstanding events but work may
+	 * still be scheduled so simply cancel it.
+	 */
+	cancel_work_sync(&gameport_event_work);
 }
 
 subsys_initcall(gameport_init);
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
new file mode 100644
index 00000000000..c48c81f0308
--- /dev/null
+++ b/drivers/input/input-mt.c
@@ -0,0 +1,170 @@
+/*
+ * Input Multitouch Library
+ *
+ * Copyright (c) 2008-2010 Henrik Rydberg
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/input/mt.h>
+#include <linux/slab.h>
+
+#define TRKID_SGN	((TRKID_MAX + 1) >> 1)
+
+/**
+ * input_mt_init_slots() - initialize MT input slots
+ * @dev: input device supporting MT events and finger tracking
+ * @num_slots: number of slots used by the device
+ *
+ * This function allocates all necessary memory for MT slot handling
+ * in the input device, prepares the ABS_MT_SLOT and
+ * ABS_MT_TRACKING_ID events for use and sets up appropriate buffers.
+ * May be called repeatedly. Returns -EINVAL if attempting to
+ * reinitialize with a different number of slots.
+ */
+int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots)
+{
+	int i;
+
+	if (!num_slots)
+		return 0;
+	if (dev->mt)
+		return dev->mtsize != num_slots ? -EINVAL : 0;
+
+	dev->mt = kcalloc(num_slots, sizeof(struct input_mt_slot), GFP_KERNEL);
+	if (!dev->mt)
+		return -ENOMEM;
+
+	dev->mtsize = num_slots;
+	input_set_abs_params(dev, ABS_MT_SLOT, 0, num_slots - 1, 0, 0);
+	input_set_abs_params(dev, ABS_MT_TRACKING_ID, 0, TRKID_MAX, 0, 0);
+	input_set_events_per_packet(dev, 6 * num_slots);
+
+	/* Mark slots as 'unused' */
+	for (i = 0; i < num_slots; i++)
+		input_mt_set_value(&dev->mt[i], ABS_MT_TRACKING_ID, -1);
+
+	return 0;
+}
+EXPORT_SYMBOL(input_mt_init_slots);
+
+/**
+ * input_mt_destroy_slots() - frees the MT slots of the input device
+ * @dev: input device with allocated MT slots
+ *
+ * This function is only needed in error path as the input core will
+ * automatically free the MT slots when the device is destroyed.
+ */
+void input_mt_destroy_slots(struct input_dev *dev)
+{
+	kfree(dev->mt);
+	dev->mt = NULL;
+	dev->mtsize = 0;
+	dev->slot = 0;
+	dev->trkid = 0;
+}
+EXPORT_SYMBOL(input_mt_destroy_slots);
+
+/**
+ * input_mt_report_slot_state() - report contact state
+ * @dev: input device with allocated MT slots
+ * @tool_type: the tool type to use in this slot
+ * @active: true if contact is active, false otherwise
+ *
+ * Reports a contact via ABS_MT_TRACKING_ID, and optionally
+ * ABS_MT_TOOL_TYPE. If active is true and the slot is currently
+ * inactive, or if the tool type is changed, a new tracking id is
+ * assigned to the slot. The tool type is only reported if the
+ * corresponding absbit field is set.
+ */
+void input_mt_report_slot_state(struct input_dev *dev,
+				unsigned int tool_type, bool active)
+{
+	struct input_mt_slot *mt;
+	int id;
+
+	if (!dev->mt || !active) {
+		input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1);
+		return;
+	}
+
+	mt = &dev->mt[dev->slot];
+	id = input_mt_get_value(mt, ABS_MT_TRACKING_ID);
+	if (id < 0 || input_mt_get_value(mt, ABS_MT_TOOL_TYPE) != tool_type)
+		id = input_mt_new_trkid(dev);
+
+	input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, id);
+	input_event(dev, EV_ABS, ABS_MT_TOOL_TYPE, tool_type);
+}
+EXPORT_SYMBOL(input_mt_report_slot_state);
+
+/**
+ * input_mt_report_finger_count() - report contact count
+ * @dev: input device with allocated MT slots
+ * @count: the number of contacts
+ *
+ * Reports the contact count via BTN_TOOL_FINGER, BTN_TOOL_DOUBLETAP,
+ * BTN_TOOL_TRIPLETAP and BTN_TOOL_QUADTAP.
+ *
+ * The input core ensures only the KEY events already setup for
+ * this device will produce output.
+ */
+void input_mt_report_finger_count(struct input_dev *dev, int count)
+{
+	input_event(dev, EV_KEY, BTN_TOOL_FINGER, count == 1);
+	input_event(dev, EV_KEY, BTN_TOOL_DOUBLETAP, count == 2);
+	input_event(dev, EV_KEY, BTN_TOOL_TRIPLETAP, count == 3);
+	input_event(dev, EV_KEY, BTN_TOOL_QUADTAP, count == 4);
+}
+EXPORT_SYMBOL(input_mt_report_finger_count);
+
+/**
+ * input_mt_report_pointer_emulation() - common pointer emulation
+ * @dev: input device with allocated MT slots
+ * @use_count: report number of active contacts as finger count
+ *
+ * Performs legacy pointer emulation via BTN_TOUCH, ABS_X, ABS_Y and
+ * ABS_PRESSURE. Touchpad finger count is emulated if use_count is true.
+ *
+ * The input core ensures only the KEY and ABS axes already setup for
+ * this device will produce output.
+ */
+void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count)
+{
+	struct input_mt_slot *oldest = 0;
+	int oldid = dev->trkid;
+	int count = 0;
+	int i;
+
+	for (i = 0; i < dev->mtsize; ++i) {
+		struct input_mt_slot *ps = &dev->mt[i];
+		int id = input_mt_get_value(ps, ABS_MT_TRACKING_ID);
+
+		if (id < 0)
+			continue;
+		if ((id - oldid) & TRKID_SGN) {
+			oldest = ps;
+			oldid = id;
+		}
+		count++;
+	}
+
+	input_event(dev, EV_KEY, BTN_TOUCH, count > 0);
+	if (use_count)
+		input_mt_report_finger_count(dev, count);
+
+	if (oldest) {
+		int x = input_mt_get_value(oldest, ABS_MT_POSITION_X);
+		int y = input_mt_get_value(oldest, ABS_MT_POSITION_Y);
+		int p = input_mt_get_value(oldest, ABS_MT_PRESSURE);
+
+		input_event(dev, EV_ABS, ABS_X, x);
+		input_event(dev, EV_ABS, ABS_Y, y);
+		input_event(dev, EV_ABS, ABS_PRESSURE, p);
+	} else {
+		input_event(dev, EV_ABS, ABS_PRESSURE, 0);
+	}
+}
+EXPORT_SYMBOL(input_mt_report_pointer_emulation);
diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c
index 10c9b0a845f..0559e309bac 100644
--- a/drivers/input/input-polldev.c
+++ b/drivers/input/input-polldev.c
@@ -8,6 +8,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/jiffies.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
@@ -33,8 +35,7 @@ static int input_polldev_start_workqueue(void)
 	if (!polldev_users) {
 		polldev_wq = create_singlethread_workqueue("ipolldevd");
 		if (!polldev_wq) {
-			printk(KERN_ERR "input-polldev: failed to create "
-				"ipolldevd workqueue\n");
+			pr_err("failed to create ipolldevd workqueue\n");
 			retval = -ENOMEM;
 			goto out;
 		}
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 5edc41aa08f..f37da09a5e4 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -10,9 +10,11 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/types.h>
-#include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/random.h>
@@ -959,10 +961,8 @@ static int input_attach_handler(struct input_dev *dev, struct input_handler *han
 
 	error = handler->connect(handler, dev, id);
 	if (error && error != -ENODEV)
-		printk(KERN_ERR
-			"input: failed to attach handler %s to device %s, "
-			"error: %d\n",
-			handler->name, kobject_name(&dev->dev.kobj), error);
+		pr_err("failed to attach handler %s to device %s, error: %d\n",
+		       handler->name, kobject_name(&dev->dev.kobj), error);
 
 	return error;
 }
@@ -1110,6 +1110,8 @@ static int input_devices_seq_show(struct seq_file *seq, void *v)
 		seq_printf(seq, "%s ", handle->name);
 	seq_putc(seq, '\n');
 
+	input_seq_print_bitmap(seq, "PROP", dev->propbit, INPUT_PROP_MAX);
+
 	input_seq_print_bitmap(seq, "EV", dev->evbit, EV_MAX);
 	if (test_bit(EV_KEY, dev->evbit))
 		input_seq_print_bitmap(seq, "KEY", dev->keybit, KEY_MAX);
@@ -1333,11 +1335,26 @@ static ssize_t input_dev_show_modalias(struct device *dev,
 }
 static DEVICE_ATTR(modalias, S_IRUGO, input_dev_show_modalias, NULL);
 
+static int input_print_bitmap(char *buf, int buf_size, unsigned long *bitmap,
+			      int max, int add_cr);
+
+static ssize_t input_dev_show_properties(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct input_dev *input_dev = to_input_dev(dev);
+	int len = input_print_bitmap(buf, PAGE_SIZE, input_dev->propbit,
+				     INPUT_PROP_MAX, true);
+	return min_t(int, len, PAGE_SIZE);
+}
+static DEVICE_ATTR(properties, S_IRUGO, input_dev_show_properties, NULL);
+
 static struct attribute *input_dev_attrs[] = {
 	&dev_attr_name.attr,
 	&dev_attr_phys.attr,
 	&dev_attr_uniq.attr,
 	&dev_attr_modalias.attr,
+	&dev_attr_properties.attr,
 	NULL
 };
 
@@ -1471,7 +1488,7 @@ static int input_add_uevent_bm_var(struct kobj_uevent_env *env,
 {
 	int len;
 
-	if (add_uevent_var(env, "%s=", name))
+	if (add_uevent_var(env, "%s", name))
 		return -ENOMEM;
 
 	len = input_print_bitmap(&env->buf[env->buflen - 1],
@@ -1537,6 +1554,8 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env)
 	if (dev->uniq)
 		INPUT_ADD_HOTPLUG_VAR("UNIQ=\"%s\"", dev->uniq);
 
+	INPUT_ADD_HOTPLUG_BM_VAR("PROP=", dev->propbit, INPUT_PROP_MAX);
+
 	INPUT_ADD_HOTPLUG_BM_VAR("EV=", dev->evbit, EV_MAX);
 	if (test_bit(EV_KEY, dev->evbit))
 		INPUT_ADD_HOTPLUG_BM_VAR("KEY=", dev->keybit, KEY_MAX);
@@ -1726,52 +1745,6 @@ void input_free_device(struct input_dev *dev)
 EXPORT_SYMBOL(input_free_device);
 
 /**
- * input_mt_create_slots() - create MT input slots
- * @dev: input device supporting MT events and finger tracking
- * @num_slots: number of slots used by the device
- *
- * This function allocates all necessary memory for MT slot handling in the
- * input device, and adds ABS_MT_SLOT to the device capabilities. All slots
- * are initially marked as unused by setting ABS_MT_TRACKING_ID to -1.
- */
-int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots)
-{
-	int i;
-
-	if (!num_slots)
-		return 0;
-
-	dev->mt = kcalloc(num_slots, sizeof(struct input_mt_slot), GFP_KERNEL);
-	if (!dev->mt)
-		return -ENOMEM;
-
-	dev->mtsize = num_slots;
-	input_set_abs_params(dev, ABS_MT_SLOT, 0, num_slots - 1, 0, 0);
-
-	/* Mark slots as 'unused' */
-	for (i = 0; i < num_slots; i++)
-		dev->mt[i].abs[ABS_MT_TRACKING_ID - ABS_MT_FIRST] = -1;
-
-	return 0;
-}
-EXPORT_SYMBOL(input_mt_create_slots);
-
-/**
- * input_mt_destroy_slots() - frees the MT slots of the input device
- * @dev: input device with allocated MT slots
- *
- * This function is only needed in error path as the input core will
- * automatically free the MT slots when the device is destroyed.
- */
-void input_mt_destroy_slots(struct input_dev *dev)
-{
-	kfree(dev->mt);
-	dev->mt = NULL;
-	dev->mtsize = 0;
-}
-EXPORT_SYMBOL(input_mt_destroy_slots);
-
-/**
  * input_set_capability - mark device as capable of a certain event
  * @dev: device that is capable of emitting or accepting event
  * @type: type of the event (EV_KEY, EV_REL, etc...)
@@ -1820,9 +1793,8 @@ void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int
 		break;
 
 	default:
-		printk(KERN_ERR
-			"input_set_capability: unknown type %u (code %u)\n",
-			type, code);
+		pr_err("input_set_capability: unknown type %u (code %u)\n",
+		       type, code);
 		dump_stack();
 		return;
 	}
@@ -1904,8 +1876,9 @@ int input_register_device(struct input_dev *dev)
 		return error;
 
 	path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
-	printk(KERN_INFO "input: %s as %s\n",
-		dev->name ? dev->name : "Unspecified device", path ? path : "N/A");
+	pr_info("%s as %s\n",
+		dev->name ? dev->name : "Unspecified device",
+		path ? path : "N/A");
 	kfree(path);
 
 	error = mutex_lock_interruptible(&input_mutex);
@@ -2187,7 +2160,7 @@ static int __init input_init(void)
 
 	err = class_register(&input_class);
 	if (err) {
-		printk(KERN_ERR "input: unable to register input_dev class\n");
+		pr_err("unable to register input_dev class\n");
 		return err;
 	}
 
@@ -2197,7 +2170,7 @@ static int __init input_init(void)
 
 	err = register_chrdev(INPUT_MAJOR, "input", &input_fops);
 	if (err) {
-		printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR);
+		pr_err("unable to register char major %d", INPUT_MAJOR);
 		goto fail2;
 	}
 
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 9d424cebfd2..3182c9cd1b0 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -10,6 +10,8 @@
  * (at your option) any later version.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <asm/io.h>
 #include <asm/system.h>
 #include <linux/delay.h>
@@ -806,7 +808,7 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
 			break;
 
 	if (minor == JOYDEV_MINORS) {
-		printk(KERN_ERR "joydev: no more free joydev devices\n");
+		pr_err("no more free joydev devices\n");
 		return -ENFILE;
 	}
 
diff --git a/drivers/input/joystick/iforce/Makefile b/drivers/input/joystick/iforce/Makefile
index 74daff49ab6..bc5bda22f15 100644
--- a/drivers/input/joystick/iforce/Makefile
+++ b/drivers/input/joystick/iforce/Makefile
@@ -4,17 +4,8 @@
 # By Johann Deneux <johann.deneux@gmail.com>
 #
 
-# Goal definition
-iforce-objs	:= iforce-ff.o iforce-main.o iforce-packets.o
-
 obj-$(CONFIG_JOYSTICK_IFORCE)	+= iforce.o
 
-ifeq ($(CONFIG_JOYSTICK_IFORCE_232),y)
-	iforce-objs += iforce-serio.o
-endif
-
-ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),y)
-	iforce-objs += iforce-usb.o
-endif
-
-EXTRA_CFLAGS = -Werror-implicit-function-declaration
+iforce-y := iforce-ff.o iforce-main.o iforce-packets.o
+iforce-$(CONFIG_JOYSTICK_IFORCE_232)	+= iforce-serio.o
+iforce-$(CONFIG_JOYSTICK_IFORCE_USB)	+= iforce-usb.o
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index f9fb7fa10af..56abf3d0e91 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -543,21 +543,25 @@ exit:
 static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 {
 	struct usb_endpoint_descriptor *ep_irq_out;
-	int error = -ENOMEM;
+	int error;
 
 	if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX)
 		return 0;
 
 	xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
 					 GFP_KERNEL, &xpad->odata_dma);
-	if (!xpad->odata)
+	if (!xpad->odata) {
+		error = -ENOMEM;
 		goto fail1;
+	}
 
 	mutex_init(&xpad->odata_mutex);
 
 	xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
-	if (!xpad->irq_out)
+	if (!xpad->irq_out) {
+		error = -ENOMEM;
 		goto fail2;
+	}
 
 	ep_irq_out = &intf->cur_altsetting->endpoint[1].desc;
 	usb_fill_int_urb(xpad->irq_out, xpad->udev,
@@ -728,7 +732,7 @@ static void xpad_led_disconnect(struct usb_xpad *xpad)
 
 	if (xpad_led) {
 		led_classdev_unregister(&xpad_led->led_cdev);
-		kfree(xpad_led->name);
+		kfree(xpad_led);
 	}
 }
 #else
@@ -756,8 +760,9 @@ static void xpad_close(struct input_dev *dev)
 {
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
-	if(xpad->xtype != XTYPE_XBOX360W)
+	if (xpad->xtype != XTYPE_XBOX360W)
 		usb_kill_urb(xpad->irq_in);
+
 	xpad_stop_output(xpad);
 }
 
@@ -789,8 +794,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	struct usb_xpad *xpad;
 	struct input_dev *input_dev;
 	struct usb_endpoint_descriptor *ep_irq_in;
-	int i;
-	int error = -ENOMEM;
+	int i, error;
 
 	for (i = 0; xpad_device[i].idVendor; i++) {
 		if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
@@ -800,17 +804,23 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
 	input_dev = input_allocate_device();
-	if (!xpad || !input_dev)
+	if (!xpad || !input_dev) {
+		error = -ENOMEM;
 		goto fail1;
+	}
 
 	xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN,
 					 GFP_KERNEL, &xpad->idata_dma);
-	if (!xpad->idata)
+	if (!xpad->idata) {
+		error = -ENOMEM;
 		goto fail1;
+	}
 
 	xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
-	if (!xpad->irq_in)
+	if (!xpad->irq_in) {
+		error = -ENOMEM;
 		goto fail2;
+	}
 
 	xpad->udev = udev;
 	xpad->mapping = xpad_device[i].mapping;
@@ -887,15 +897,15 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	error = xpad_init_output(intf, xpad);
 	if (error)
-		goto fail2;
+		goto fail3;
 
 	error = xpad_init_ff(xpad);
 	if (error)
-		goto fail3;
+		goto fail4;
 
 	error = xpad_led_probe(xpad);
 	if (error)
-		goto fail3;
+		goto fail5;
 
 	ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
 	usb_fill_int_urb(xpad->irq_in, udev,
@@ -907,34 +917,26 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	error = input_register_device(xpad->dev);
 	if (error)
-		goto fail4;
+		goto fail6;
 
 	usb_set_intfdata(intf, xpad);
 
-	/*
-	 * Submit the int URB immediatly rather than waiting for open
-	 * because we get status messages from the device whether
-	 * or not any controllers are attached.  In fact, it's
-	 * exactly the message that a controller has arrived that
-	 * we're waiting for.
-	 */
 	if (xpad->xtype == XTYPE_XBOX360W) {
-		xpad->irq_in->dev = xpad->udev;
-		error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
-		if (error)
-			goto fail4;
-
 		/*
 		 * Setup the message to set the LEDs on the
 		 * controller when it shows up
 		 */
 		xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
-		if(!xpad->bulk_out)
-			goto fail5;
+		if (!xpad->bulk_out) {
+			error = -ENOMEM;
+			goto fail7;
+		}
 
 		xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
-		if(!xpad->bdata)
-			goto fail6;
+		if (!xpad->bdata) {
+			error = -ENOMEM;
+			goto fail8;
+		}
 
 		xpad->bdata[2] = 0x08;
 		switch (intf->cur_altsetting->desc.bInterfaceNumber) {
@@ -955,14 +957,31 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 		usb_fill_bulk_urb(xpad->bulk_out, udev,
 				usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress),
 				xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad);
+
+		/*
+		 * Submit the int URB immediately rather than waiting for open
+		 * because we get status messages from the device whether
+		 * or not any controllers are attached.  In fact, it's
+		 * exactly the message that a controller has arrived that
+		 * we're waiting for.
+		 */
+		xpad->irq_in->dev = xpad->udev;
+		error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+		if (error)
+			goto fail9;
 	}
 
 	return 0;
 
- fail6:	usb_free_urb(xpad->bulk_out);
- fail5:	usb_kill_urb(xpad->irq_in);
- fail4:	usb_free_urb(xpad->irq_in);
- fail3:	xpad_deinit_output(xpad);
+ fail9:	kfree(xpad->bdata);
+ fail8:	usb_free_urb(xpad->bulk_out);
+ fail7:	input_unregister_device(input_dev);
+	input_dev = NULL;
+ fail6:	xpad_led_disconnect(xpad);
+ fail5:	if (input_dev)
+		input_ff_destroy(input_dev);
+ fail4:	xpad_deinit_output(xpad);
+ fail3:	usb_free_urb(xpad->irq_in);
  fail2:	usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
  fail1:	input_free_device(input_dev);
 	kfree(xpad);
@@ -974,21 +993,24 @@ static void xpad_disconnect(struct usb_interface *intf)
 {
 	struct usb_xpad *xpad = usb_get_intfdata (intf);
 
-	usb_set_intfdata(intf, NULL);
-	if (xpad) {
-		xpad_led_disconnect(xpad);
-		input_unregister_device(xpad->dev);
-		xpad_deinit_output(xpad);
-		if (xpad->xtype == XTYPE_XBOX360W) {
-			usb_kill_urb(xpad->bulk_out);
-			usb_free_urb(xpad->bulk_out);
-			usb_kill_urb(xpad->irq_in);
-		}
-		usb_free_urb(xpad->irq_in);
-		usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
-				xpad->idata, xpad->idata_dma);
-		kfree(xpad);
+	xpad_led_disconnect(xpad);
+	input_unregister_device(xpad->dev);
+	xpad_deinit_output(xpad);
+
+	if (xpad->xtype == XTYPE_XBOX360W) {
+		usb_kill_urb(xpad->bulk_out);
+		usb_free_urb(xpad->bulk_out);
+		usb_kill_urb(xpad->irq_in);
 	}
+
+	usb_free_urb(xpad->irq_in);
+	usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
+			xpad->idata, xpad->idata_dma);
+
+	kfree(xpad->bdata);
+	kfree(xpad);
+
+	usb_set_intfdata(intf, NULL);
 }
 
 static struct usb_driver xpad_driver = {
@@ -1000,10 +1022,7 @@ static struct usb_driver xpad_driver = {
 
 static int __init usb_xpad_init(void)
 {
-	int result = usb_register(&xpad_driver);
-	if (result == 0)
-		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
-	return result;
+	return usb_register(&xpad_driver);
 }
 
 static void __exit usb_xpad_exit(void)
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 3a87f3ba5f7..e98beae23cf 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -196,20 +196,22 @@ config KEYBOARD_GPIO_POLLED
 	  module will be called gpio_keys_polled.
 
 config KEYBOARD_TCA6416
-	tristate "TCA6416 Keypad Support"
+	tristate "TCA6416/TCA6408A Keypad Support"
 	depends on I2C
 	help
 	  This driver implements basic keypad functionality
-	  for keys connected through TCA6416 IO expander
+	  for keys connected through TCA6416/TCA6408A IO expanders.
 
 	  Say Y here if your device has keys connected to
-	  TCA6416 IO expander. Your board-specific setup logic
+	  TCA6416/TCA6408A IO expander. Your board-specific setup logic
 	  must also provide pin-mask details(of which TCA6416 pins
 	  are used for keypad).
 
-	  If enabled the complete TCA6416 device will be managed through
+	  If enabled the entire TCA6416 device will be managed through
 	  this driver.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called tca6416_keypad.
 
 config KEYBOARD_MATRIX
 	tristate "GPIO driven matrix keypad support"
@@ -459,6 +461,15 @@ config KEYBOARD_OMAP4
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap4-keypad.
 
+config KEYBOARD_SPEAR
+	tristate "ST SPEAR keyboard support"
+	depends on PLAT_SPEAR
+	help
+	  Say Y here if you want to use the SPEAR keyboard.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called spear-keboard.
+
 config KEYBOARD_TNETV107X
 	tristate "TI TNETV107X keypad support"
 	depends on ARCH_DAVINCI_TNETV107X
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 622de73a445..fde89e0dd46 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
 obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
+obj-$(CONFIG_KEYBOARD_SPEAR)		+= spear-keyboard.o
 obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
new file mode 100644
index 00000000000..bee03d64c45
--- /dev/null
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -0,0 +1,344 @@
+/*
+ * SPEAr Keyboard Driver
+ * Based on omap-keypad driver
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeup.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <plat/keyboard.h>
+
+/* Keyboard Registers */
+#define MODE_REG	0x00	/* 16 bit reg */
+#define STATUS_REG	0x0C	/* 2 bit reg */
+#define DATA_REG	0x10	/* 8 bit reg */
+#define INTR_MASK	0x54
+
+/* Register Values */
+/*
+ * pclk freq mask = (APB FEQ -1)= 82 MHZ.Programme bit 15-9 in mode
+ * control register as 1010010(82MHZ)
+ */
+#define PCLK_FREQ_MSK	0xA400	/* 82 MHz */
+#define START_SCAN	0x0100
+#define SCAN_RATE_10	0x0000
+#define SCAN_RATE_20	0x0004
+#define SCAN_RATE_40	0x0008
+#define SCAN_RATE_80	0x000C
+#define MODE_KEYBOARD	0x0002
+#define DATA_AVAIL	0x2
+
+#define KEY_MASK	0xFF000000
+#define KEY_VALUE	0x00FFFFFF
+#define ROW_MASK	0xF0
+#define COLUMN_MASK	0x0F
+#define ROW_SHIFT	4
+
+struct spear_kbd {
+	struct input_dev *input;
+	struct resource *res;
+	void __iomem *io_base;
+	struct clk *clk;
+	unsigned int irq;
+	unsigned short last_key;
+	unsigned short keycodes[256];
+};
+
+static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
+{
+	struct spear_kbd *kbd = dev_id;
+	struct input_dev *input = kbd->input;
+	unsigned int key;
+	u8 sts, val;
+
+	sts = readb(kbd->io_base + STATUS_REG);
+	if (sts & DATA_AVAIL)
+		return IRQ_NONE;
+
+	if (kbd->last_key != KEY_RESERVED) {
+		input_report_key(input, kbd->last_key, 0);
+		kbd->last_key = KEY_RESERVED;
+	}
+
+	/* following reads active (row, col) pair */
+	val = readb(kbd->io_base + DATA_REG);
+	key = kbd->keycodes[val];
+
+	input_event(input, EV_MSC, MSC_SCAN, val);
+	input_report_key(input, key, 1);
+	input_sync(input);
+
+	kbd->last_key = key;
+
+	/* clear interrupt */
+	writeb(0, kbd->io_base + STATUS_REG);
+
+	return IRQ_HANDLED;
+}
+
+static int spear_kbd_open(struct input_dev *dev)
+{
+	struct spear_kbd *kbd = input_get_drvdata(dev);
+	int error;
+	u16 val;
+
+	kbd->last_key = KEY_RESERVED;
+
+	error = clk_enable(kbd->clk);
+	if (error)
+		return error;
+
+	/* program keyboard */
+	val = SCAN_RATE_80 | MODE_KEYBOARD | PCLK_FREQ_MSK;
+	writew(val, kbd->io_base + MODE_REG);
+	writeb(1, kbd->io_base + STATUS_REG);
+
+	/* start key scan */
+	val = readw(kbd->io_base + MODE_REG);
+	val |= START_SCAN;
+	writew(val, kbd->io_base + MODE_REG);
+
+	return 0;
+}
+
+static void spear_kbd_close(struct input_dev *dev)
+{
+	struct spear_kbd *kbd = input_get_drvdata(dev);
+	u16 val;
+
+	/* stop key scan */
+	val = readw(kbd->io_base + MODE_REG);
+	val &= ~START_SCAN;
+	writew(val, kbd->io_base + MODE_REG);
+
+	clk_disable(kbd->clk);
+
+	kbd->last_key = KEY_RESERVED;
+}
+
+static int __devinit spear_kbd_probe(struct platform_device *pdev)
+{
+	const struct kbd_platform_data *pdata = pdev->dev.platform_data;
+	const struct matrix_keymap_data *keymap;
+	struct spear_kbd *kbd;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int irq;
+	int error;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "Invalid platform data\n");
+		return -EINVAL;
+	}
+
+	keymap = pdata->keymap;
+	if (!keymap) {
+		dev_err(&pdev->dev, "no keymap defined\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no keyboard resource defined\n");
+		return -EBUSY;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "not able to get irq for the device\n");
+		return irq;
+	}
+
+	kbd = kzalloc(sizeof(*kbd), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!kbd || !input_dev) {
+		dev_err(&pdev->dev, "out of memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	kbd->input = input_dev;
+	kbd->irq = irq;
+	kbd->res = request_mem_region(res->start, resource_size(res),
+				      pdev->name);
+	if (!kbd->res) {
+		dev_err(&pdev->dev, "keyboard region already claimed\n");
+		error = -EBUSY;
+		goto err_free_mem;
+	}
+
+	kbd->io_base = ioremap(res->start, resource_size(res));
+	if (!kbd->io_base) {
+		dev_err(&pdev->dev, "ioremap failed for kbd_region\n");
+		error = -ENOMEM;
+		goto err_release_mem_region;
+	}
+
+	kbd->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(kbd->clk)) {
+		error = PTR_ERR(kbd->clk);
+		goto err_iounmap;
+	}
+
+	input_dev->name = "Spear Keyboard";
+	input_dev->phys = "keyboard/input0";
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->open = spear_kbd_open;
+	input_dev->close = spear_kbd_close;
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	if (pdata->rep)
+		__set_bit(EV_REP, input_dev->evbit);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+
+	input_dev->keycode = kbd->keycodes;
+	input_dev->keycodesize = sizeof(kbd->keycodes[0]);
+	input_dev->keycodemax = ARRAY_SIZE(kbd->keycodes);
+
+	matrix_keypad_build_keymap(keymap, ROW_SHIFT,
+			input_dev->keycode, input_dev->keybit);
+
+	input_set_drvdata(input_dev, kbd);
+
+	error = request_irq(irq, spear_kbd_interrupt, 0, "keyboard", kbd);
+	if (error) {
+		dev_err(&pdev->dev, "request_irq fail\n");
+		goto err_put_clk;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "Unable to register keyboard device\n");
+		goto err_free_irq;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+	platform_set_drvdata(pdev, kbd);
+
+	return 0;
+
+err_free_irq:
+	free_irq(kbd->irq, kbd);
+err_put_clk:
+	clk_put(kbd->clk);
+err_iounmap:
+	iounmap(kbd->io_base);
+err_release_mem_region:
+	release_mem_region(res->start, resource_size(res));
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(kbd);
+
+	return error;
+}
+
+static int __devexit spear_kbd_remove(struct platform_device *pdev)
+{
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+
+	free_irq(kbd->irq, kbd);
+	input_unregister_device(kbd->input);
+	clk_put(kbd->clk);
+	iounmap(kbd->io_base);
+	release_mem_region(kbd->res->start, resource_size(kbd->res));
+	kfree(kbd);
+
+	device_init_wakeup(&pdev->dev, 1);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int spear_kbd_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kbd->input;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		clk_enable(kbd->clk);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(kbd->irq);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int spear_kbd_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kbd->input;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(kbd->irq);
+
+	if (input_dev->users)
+		clk_enable(kbd->clk);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static const struct dev_pm_ops spear_kbd_pm_ops = {
+	.suspend	= spear_kbd_suspend,
+	.resume		= spear_kbd_resume,
+};
+#endif
+
+static struct platform_driver spear_kbd_driver = {
+	.probe		= spear_kbd_probe,
+	.remove		= __devexit_p(spear_kbd_remove),
+	.driver		= {
+		.name	= "keyboard",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &spear_kbd_pm_ops,
+#endif
+	},
+};
+
+static int __init spear_kbd_init(void)
+{
+	return platform_driver_register(&spear_kbd_driver);
+}
+module_init(spear_kbd_init);
+
+static void __exit spear_kbd_exit(void)
+{
+	platform_driver_unregister(&spear_kbd_driver);
+}
+module_exit(spear_kbd_exit);
+
+MODULE_AUTHOR("Rajeev Kumar");
+MODULE_DESCRIPTION("SPEAr Keyboard Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 00137bebcf9..800fbccf1f0 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -29,6 +29,7 @@
 
 static const struct i2c_device_id tca6416_id[] = {
 	{ "tca6416-keys", 16, },
+	{ "tca6408-keys", 8, },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, tca6416_id);
@@ -46,8 +47,9 @@ struct tca6416_keypad_chip {
 	struct i2c_client *client;
 	struct input_dev *input;
 	struct delayed_work dwork;
-	u16 pinmask;
+	int io_size;
 	int irqnum;
+	u16 pinmask;
 	bool use_polling;
 	struct tca6416_button buttons[0];
 };
@@ -56,7 +58,9 @@ static int tca6416_write_reg(struct tca6416_keypad_chip *chip, int reg, u16 val)
 {
 	int error;
 
-	error = i2c_smbus_write_word_data(chip->client, reg << 1, val);
+	error = chip->io_size > 8 ?
+		i2c_smbus_write_word_data(chip->client, reg << 1, val) :
+		i2c_smbus_write_byte_data(chip->client, reg, val);
 	if (error < 0) {
 		dev_err(&chip->client->dev,
 			"%s failed, reg: %d, val: %d, error: %d\n",
@@ -71,7 +75,9 @@ static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg, u16 *val)
 {
 	int retval;
 
-	retval = i2c_smbus_read_word_data(chip->client, reg << 1);
+	retval = chip->io_size > 8 ?
+		 i2c_smbus_read_word_data(chip->client, reg << 1) :
+		 i2c_smbus_read_byte_data(chip->client, reg);
 	if (retval < 0) {
 		dev_err(&chip->client->dev, "%s failed, reg: %d, error: %d\n",
 			__func__, reg, retval);
@@ -224,6 +230,7 @@ static int __devinit tca6416_keypad_probe(struct i2c_client *client,
 
 	chip->client = client;
 	chip->input = input;
+	chip->io_size = id->driver_data;
 	chip->pinmask = pdata->pinmask;
 	chip->use_polling = pdata->use_polling;
 
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index b99b8cbde02..f0d90172a65 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -448,4 +448,28 @@ config INPUT_ADXL34X_SPI
 	  To compile this driver as a module, choose M here: the
 	  module will be called adxl34x-spi.
 
+config INPUT_CMA3000
+	tristate "VTI CMA3000 Tri-axis accelerometer"
+	help
+	  Say Y here if you want to use VTI CMA3000_D0x Accelerometer
+	  driver
+
+	  This driver currently only supports I2C interface to the
+	  controller. Also select the I2C method.
+
+	  If unsure, say N
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cma3000_d0x.
+
+config INPUT_CMA3000_I2C
+	tristate "Support I2C bus connection"
+	depends on INPUT_CMA3000 && I2C
+	help
+	  Say Y here if you want to use VTI CMA3000_D0x Accelerometer
+	  through I2C interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cma3000_d0x_i2c.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 1fe1f6c8b73..35bcfe46555 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -18,6 +18,8 @@ obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
 obj-$(CONFIG_INPUT_BFIN_ROTARY)		+= bfin_rotary.o
 obj-$(CONFIG_INPUT_CM109)		+= cm109.o
+obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
+obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
 obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
 obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
new file mode 100644
index 00000000000..1633b634226
--- /dev/null
+++ b/drivers/input/misc/cma3000_d0x.c
@@ -0,0 +1,398 @@
+/*
+ * VTI CMA3000_D0x Accelerometer driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input/cma3000.h>
+
+#include "cma3000_d0x.h"
+
+#define CMA3000_WHOAMI      0x00
+#define CMA3000_REVID       0x01
+#define CMA3000_CTRL        0x02
+#define CMA3000_STATUS      0x03
+#define CMA3000_RSTR        0x04
+#define CMA3000_INTSTATUS   0x05
+#define CMA3000_DOUTX       0x06
+#define CMA3000_DOUTY       0x07
+#define CMA3000_DOUTZ       0x08
+#define CMA3000_MDTHR       0x09
+#define CMA3000_MDFFTMR     0x0A
+#define CMA3000_FFTHR       0x0B
+
+#define CMA3000_RANGE2G    (1 << 7)
+#define CMA3000_RANGE8G    (0 << 7)
+#define CMA3000_BUSI2C     (0 << 4)
+#define CMA3000_MODEMASK   (7 << 1)
+#define CMA3000_GRANGEMASK (1 << 7)
+
+#define CMA3000_STATUS_PERR    1
+#define CMA3000_INTSTATUS_FFDET (1 << 2)
+
+/* Settling time delay in ms */
+#define CMA3000_SETDELAY    30
+
+/* Delay for clearing interrupt in us */
+#define CMA3000_INTDELAY    44
+
+
+/*
+ * Bit weights in mg for bit 0, other bits need
+ * multipy factor 2^n. Eight bit is the sign bit.
+ */
+#define BIT_TO_2G  18
+#define BIT_TO_8G  71
+
+struct cma3000_accl_data {
+	const struct cma3000_bus_ops *bus_ops;
+	const struct cma3000_platform_data *pdata;
+
+	struct device *dev;
+	struct input_dev *input_dev;
+
+	int bit_to_mg;
+	int irq;
+
+	int g_range;
+	u8 mode;
+
+	struct mutex mutex;
+	bool opened;
+	bool suspended;
+};
+
+#define CMA3000_READ(data, reg, msg) \
+	(data->bus_ops->read(data->dev, reg, msg))
+#define CMA3000_SET(data, reg, val, msg) \
+	((data)->bus_ops->write(data->dev, reg, val, msg))
+
+/*
+ * Conversion for each of the eight modes to g, depending
+ * on G range i.e 2G or 8G. Some modes always operate in
+ * 8G.
+ */
+
+static int mode_to_mg[8][2] = {
+	{ 0, 0 },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ BIT_TO_8G, BIT_TO_8G },
+	{ BIT_TO_8G, BIT_TO_8G },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ 0, 0},
+};
+
+static void decode_mg(struct cma3000_accl_data *data, int *datax,
+				int *datay, int *dataz)
+{
+	/* Data in 2's complement, convert to mg */
+	*datax = ((s8)*datax) * data->bit_to_mg;
+	*datay = ((s8)*datay) * data->bit_to_mg;
+	*dataz = ((s8)*dataz) * data->bit_to_mg;
+}
+
+static irqreturn_t cma3000_thread_irq(int irq, void *dev_id)
+{
+	struct cma3000_accl_data *data = dev_id;
+	int datax, datay, dataz;
+	u8 ctrl, mode, range, intr_status;
+
+	intr_status = CMA3000_READ(data, CMA3000_INTSTATUS, "interrupt status");
+	if (intr_status < 0)
+		return IRQ_NONE;
+
+	/* Check if free fall is detected, report immediately */
+	if (intr_status & CMA3000_INTSTATUS_FFDET) {
+		input_report_abs(data->input_dev, ABS_MISC, 1);
+		input_sync(data->input_dev);
+	} else {
+		input_report_abs(data->input_dev, ABS_MISC, 0);
+	}
+
+	datax = CMA3000_READ(data, CMA3000_DOUTX, "X");
+	datay = CMA3000_READ(data, CMA3000_DOUTY, "Y");
+	dataz = CMA3000_READ(data, CMA3000_DOUTZ, "Z");
+
+	ctrl = CMA3000_READ(data, CMA3000_CTRL, "ctrl");
+	mode = (ctrl & CMA3000_MODEMASK) >> 1;
+	range = (ctrl & CMA3000_GRANGEMASK) >> 7;
+
+	data->bit_to_mg = mode_to_mg[mode][range];
+
+	/* Interrupt not for this device */
+	if (data->bit_to_mg == 0)
+		return IRQ_NONE;
+
+	/* Decode register values to milli g */
+	decode_mg(data, &datax, &datay, &dataz);
+
+	input_report_abs(data->input_dev, ABS_X, datax);
+	input_report_abs(data->input_dev, ABS_Y, datay);
+	input_report_abs(data->input_dev, ABS_Z, dataz);
+	input_sync(data->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int cma3000_reset(struct cma3000_accl_data *data)
+{
+	int val;
+
+	/* Reset sequence */
+	CMA3000_SET(data, CMA3000_RSTR, 0x02, "Reset");
+	CMA3000_SET(data, CMA3000_RSTR, 0x0A, "Reset");
+	CMA3000_SET(data, CMA3000_RSTR, 0x04, "Reset");
+
+	/* Settling time delay */
+	mdelay(10);
+
+	val = CMA3000_READ(data, CMA3000_STATUS, "Status");
+	if (val < 0) {
+		dev_err(data->dev, "Reset failed\n");
+		return val;
+	}
+
+	if (val & CMA3000_STATUS_PERR) {
+		dev_err(data->dev, "Parity Error\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int cma3000_poweron(struct cma3000_accl_data *data)
+{
+	const struct cma3000_platform_data *pdata = data->pdata;
+	u8 ctrl = 0;
+	int ret;
+
+	if (data->g_range == CMARANGE_2G) {
+		ctrl = (data->mode << 1) | CMA3000_RANGE2G;
+	} else if (data->g_range == CMARANGE_8G) {
+		ctrl = (data->mode << 1) | CMA3000_RANGE8G;
+	} else {
+		dev_info(data->dev,
+			 "Invalid G range specified, assuming 8G\n");
+		ctrl = (data->mode << 1) | CMA3000_RANGE8G;
+	}
+
+	ctrl |= data->bus_ops->ctrl_mod;
+
+	CMA3000_SET(data, CMA3000_MDTHR, pdata->mdthr,
+		    "Motion Detect Threshold");
+	CMA3000_SET(data, CMA3000_MDFFTMR, pdata->mdfftmr,
+		    "Time register");
+	CMA3000_SET(data, CMA3000_FFTHR, pdata->ffthr,
+		    "Free fall threshold");
+	ret = CMA3000_SET(data, CMA3000_CTRL, ctrl, "Mode setting");
+	if (ret < 0)
+		return -EIO;
+
+	msleep(CMA3000_SETDELAY);
+
+	return 0;
+}
+
+static int cma3000_poweroff(struct cma3000_accl_data *data)
+{
+	int ret;
+
+	ret = CMA3000_SET(data, CMA3000_CTRL, CMAMODE_POFF, "Mode setting");
+	msleep(CMA3000_SETDELAY);
+
+	return ret;
+}
+
+static int cma3000_open(struct input_dev *input_dev)
+{
+	struct cma3000_accl_data *data = input_get_drvdata(input_dev);
+
+	mutex_lock(&data->mutex);
+
+	if (!data->suspended)
+		cma3000_poweron(data);
+
+	data->opened = true;
+
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+static void cma3000_close(struct input_dev *input_dev)
+{
+	struct cma3000_accl_data *data = input_get_drvdata(input_dev);
+
+	mutex_lock(&data->mutex);
+
+	if (!data->suspended)
+		cma3000_poweroff(data);
+
+	data->opened = false;
+
+	mutex_unlock(&data->mutex);
+}
+
+void cma3000_suspend(struct cma3000_accl_data *data)
+{
+	mutex_lock(&data->mutex);
+
+	if (!data->suspended && data->opened)
+		cma3000_poweroff(data);
+
+	data->suspended = true;
+
+	mutex_unlock(&data->mutex);
+}
+EXPORT_SYMBOL(cma3000_suspend);
+
+
+void cma3000_resume(struct cma3000_accl_data *data)
+{
+	mutex_lock(&data->mutex);
+
+	if (data->suspended && data->opened)
+		cma3000_poweron(data);
+
+	data->suspended = false;
+
+	mutex_unlock(&data->mutex);
+}
+EXPORT_SYMBOL(cma3000_resume);
+
+struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
+				       const struct cma3000_bus_ops *bops)
+{
+	const struct cma3000_platform_data *pdata = dev->platform_data;
+	struct cma3000_accl_data *data;
+	struct input_dev *input_dev;
+	int rev;
+	int error;
+
+	if (!pdata) {
+		dev_err(dev, "platform data not found\n");
+		error = -EINVAL;
+		goto err_out;
+	}
+
+
+	/* if no IRQ return error */
+	if (irq == 0) {
+		error = -EINVAL;
+		goto err_out;
+	}
+
+	data = kzalloc(sizeof(struct cma3000_accl_data), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->dev = dev;
+	data->input_dev = input_dev;
+	data->bus_ops = bops;
+	data->pdata = pdata;
+	data->irq = irq;
+	mutex_init(&data->mutex);
+
+	data->mode = pdata->mode;
+	if (data->mode < CMAMODE_DEFAULT || data->mode > CMAMODE_POFF) {
+		data->mode = CMAMODE_MOTDET;
+		dev_warn(dev,
+			 "Invalid mode specified, assuming Motion Detect\n");
+	}
+
+	data->g_range = pdata->g_range;
+	if (data->g_range != CMARANGE_2G && data->g_range != CMARANGE_8G) {
+		dev_info(dev,
+			 "Invalid G range specified, assuming 8G\n");
+		data->g_range = CMARANGE_8G;
+	}
+
+	input_dev->name = "cma3000-accelerometer";
+	input_dev->id.bustype = bops->bustype;
+	input_dev->open = cma3000_open;
+	input_dev->close = cma3000_close;
+
+	 __set_bit(EV_ABS, input_dev->evbit);
+
+	input_set_abs_params(input_dev, ABS_X,
+			-data->g_range, data->g_range, pdata->fuzz_x, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			-data->g_range, data->g_range, pdata->fuzz_y, 0);
+	input_set_abs_params(input_dev, ABS_Z,
+			-data->g_range, data->g_range, pdata->fuzz_z, 0);
+	input_set_abs_params(input_dev, ABS_MISC, 0, 1, 0, 0);
+
+	input_set_drvdata(input_dev, data);
+
+	error = cma3000_reset(data);
+	if (error)
+		goto err_free_mem;
+
+	rev = CMA3000_READ(data, CMA3000_REVID, "Revid");
+	if (rev < 0) {
+		error = rev;
+		goto err_free_mem;
+	}
+
+	pr_info("CMA3000 Accelerometer: Revision %x\n", rev);
+
+	error = request_threaded_irq(irq, NULL, cma3000_thread_irq,
+				     pdata->irqflags | IRQF_ONESHOT,
+				     "cma3000_d0x", data);
+	if (error) {
+		dev_err(dev, "request_threaded_irq failed\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(data->input_dev);
+	if (error) {
+		dev_err(dev, "Unable to register input device\n");
+		goto err_free_irq;
+	}
+
+	return data;
+
+err_free_irq:
+	free_irq(irq, data);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+err_out:
+	return ERR_PTR(error);
+}
+EXPORT_SYMBOL(cma3000_init);
+
+void cma3000_exit(struct cma3000_accl_data *data)
+{
+	free_irq(data->irq, data);
+	input_unregister_device(data->input_dev);
+	kfree(data);
+}
+EXPORT_SYMBOL(cma3000_exit);
+
+MODULE_DESCRIPTION("CMA3000-D0x Accelerometer Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Hemanth V <hemanthv@ti.com>");
diff --git a/drivers/input/misc/cma3000_d0x.h b/drivers/input/misc/cma3000_d0x.h
new file mode 100644
index 00000000000..2304ce306e1
--- /dev/null
+++ b/drivers/input/misc/cma3000_d0x.h
@@ -0,0 +1,42 @@
+/*
+ * VTI CMA3000_D0x Accelerometer driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _INPUT_CMA3000_H
+#define _INPUT_CMA3000_H
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+struct device;
+struct cma3000_accl_data;
+
+struct cma3000_bus_ops {
+	u16 bustype;
+	u8 ctrl_mod;
+	int (*read)(struct device *, u8, char *);
+	int (*write)(struct device *, u8, u8, char *);
+};
+
+struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
+					const struct cma3000_bus_ops *bops);
+void cma3000_exit(struct cma3000_accl_data *);
+void cma3000_suspend(struct cma3000_accl_data *);
+void cma3000_resume(struct cma3000_accl_data *);
+
+#endif
diff --git a/drivers/input/misc/cma3000_d0x_i2c.c b/drivers/input/misc/cma3000_d0x_i2c.c
new file mode 100644
index 00000000000..d100cc5c578
--- /dev/null
+++ b/drivers/input/misc/cma3000_d0x_i2c.c
@@ -0,0 +1,143 @@
+/*
+ * Implements I2C interface for VTI CMA300_D0x Accelerometer driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/input/cma3000.h>
+#include "cma3000_d0x.h"
+
+static int cma3000_i2c_set(struct device *dev,
+			   u8 reg, u8 val, char *msg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, reg, val);
+	if (ret < 0)
+		dev_err(&client->dev,
+			"%s failed (%s, %d)\n", __func__, msg, ret);
+	return ret;
+}
+
+static int cma3000_i2c_read(struct device *dev, u8 reg, char *msg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0)
+		dev_err(&client->dev,
+			"%s failed (%s, %d)\n", __func__, msg, ret);
+	return ret;
+}
+
+static const struct cma3000_bus_ops cma3000_i2c_bops = {
+	.bustype	= BUS_I2C,
+#define CMA3000_BUSI2C     (0 << 4)
+	.ctrl_mod	= CMA3000_BUSI2C,
+	.read		= cma3000_i2c_read,
+	.write		= cma3000_i2c_set,
+};
+
+static int __devinit cma3000_i2c_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct cma3000_accl_data *data;
+
+	data = cma3000_init(&client->dev, client->irq, &cma3000_i2c_bops);
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	i2c_set_clientdata(client, data);
+
+	return 0;
+}
+
+static int __devexit cma3000_i2c_remove(struct i2c_client *client)
+{
+	struct cma3000_accl_data *data = i2c_get_clientdata(client);
+
+	cma3000_exit(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int cma3000_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cma3000_accl_data *data = i2c_get_clientdata(client);
+
+	cma3000_suspend(data);
+
+	return 0;
+}
+
+static int cma3000_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cma3000_accl_data *data = i2c_get_clientdata(client);
+
+	cma3000_resume(data);
+
+	return 0;
+}
+
+static const struct dev_pm_ops cma3000_i2c_pm_ops = {
+	.suspend	= cma3000_i2c_suspend,
+	.resume		= cma3000_i2c_resume,
+};
+#endif
+
+static const struct i2c_device_id cma3000_i2c_id[] = {
+	{ "cma3000_d01", 0 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(i2c, cma3000_i2c_id);
+
+static struct i2c_driver cma3000_i2c_driver = {
+	.probe		= cma3000_i2c_probe,
+	.remove		= __devexit_p(cma3000_i2c_remove),
+	.id_table	= cma3000_i2c_id,
+	.driver = {
+		.name	= "cma3000_i2c_accl",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &cma3000_i2c_pm_ops,
+#endif
+	},
+};
+
+static int __init cma3000_i2c_init(void)
+{
+	return i2c_add_driver(&cma3000_i2c_driver);
+}
+
+static void __exit cma3000_i2c_exit(void)
+{
+	i2c_del_driver(&cma3000_i2c_driver);
+}
+
+module_init(cma3000_i2c_init);
+module_exit(cma3000_i2c_exit);
+
+MODULE_DESCRIPTION("CMA3000-D0x Accelerometer I2C Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Hemanth V <hemanthv@ti.com>");
diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c
index d1583aea172..08be1a35595 100644
--- a/drivers/input/misc/pcf8574_keypad.c
+++ b/drivers/input/misc/pcf8574_keypad.c
@@ -169,19 +169,29 @@ static int __devexit pcf8574_kp_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int pcf8574_kp_resume(struct i2c_client *client)
+static int pcf8574_kp_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
+
 	enable_irq(client->irq);
 
 	return 0;
 }
 
-static int pcf8574_kp_suspend(struct i2c_client *client, pm_message_t mesg)
+static int pcf8574_kp_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
+
 	disable_irq(client->irq);
 
 	return 0;
 }
+
+static const struct dev_pm_ops pcf8574_kp_pm_ops = {
+	.suspend	= pcf8574_kp_suspend,
+	.resume		= pcf8574_kp_resume,
+};
+
 #else
 # define pcf8574_kp_resume  NULL
 # define pcf8574_kp_suspend NULL
@@ -197,11 +207,12 @@ static struct i2c_driver pcf8574_kp_driver = {
 	.driver = {
 		.name  = DRV_NAME,
 		.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm = &pcf8574_kp_pm_ops,
+#endif
 	},
 	.probe    = pcf8574_kp_probe,
 	.remove   = __devexit_p(pcf8574_kp_remove),
-	.suspend  = pcf8574_kp_suspend,
-	.resume   = pcf8574_kp_resume,
 	.id_table = pcf8574_kp_id,
 };
 
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index b9410784e6a..82542a1c109 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -37,6 +37,7 @@
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
 #include <linux/uinput.h>
+#include <linux/input/mt.h>
 #include "../input-compat.h"
 
 static int uinput_dev_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
@@ -406,8 +407,7 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
 			goto exit;
 		if (test_bit(ABS_MT_SLOT, dev->absbit)) {
 			int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1;
-			input_mt_create_slots(dev, nslot);
-			input_set_events_per_packet(dev, 6 * nslot);
+			input_mt_init_slots(dev, nslot);
 		} else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {
 			input_set_events_per_packet(dev, 60);
 		}
@@ -680,6 +680,10 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd,
 			retval = uinput_set_bit(arg, swbit, SW_MAX);
 			break;
 
+		case UI_SET_PROPBIT:
+			retval = uinput_set_bit(arg, propbit, INPUT_PROP_MAX);
+			break;
+
 		case UI_SET_PHYS:
 			if (udev->state == UIST_CREATED) {
 				retval = -EINVAL;
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index 1d2205b2480..95577c15ae5 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -40,6 +40,8 @@
 #include "psmouse.h"
 #include "hgpk.h"
 
+#define ILLEGAL_XY 999999
+
 static bool tpdebug;
 module_param(tpdebug, bool, 0644);
 MODULE_PARM_DESC(tpdebug, "enable debugging, dumping packets to KERN_DEBUG.");
@@ -47,48 +49,150 @@ MODULE_PARM_DESC(tpdebug, "enable debugging, dumping packets to KERN_DEBUG.");
 static int recalib_delta = 100;
 module_param(recalib_delta, int, 0644);
 MODULE_PARM_DESC(recalib_delta,
-	"packets containing a delta this large will cause a recalibration.");
+	"packets containing a delta this large will be discarded, and a "
+	"recalibration may be scheduled.");
 
-static int jumpy_delay = 1000;
+static int jumpy_delay = 20;
 module_param(jumpy_delay, int, 0644);
 MODULE_PARM_DESC(jumpy_delay,
 	"delay (ms) before recal after jumpiness detected");
 
-static int spew_delay = 1000;
+static int spew_delay = 1;
 module_param(spew_delay, int, 0644);
 MODULE_PARM_DESC(spew_delay,
 	"delay (ms) before recal after packet spew detected");
 
-static int recal_guard_time = 2000;
+static int recal_guard_time;
 module_param(recal_guard_time, int, 0644);
 MODULE_PARM_DESC(recal_guard_time,
 	"interval (ms) during which recal will be restarted if packet received");
 
-static int post_interrupt_delay = 1000;
+static int post_interrupt_delay = 40;
 module_param(post_interrupt_delay, int, 0644);
 MODULE_PARM_DESC(post_interrupt_delay,
 	"delay (ms) before recal after recal interrupt detected");
 
+static bool autorecal = true;
+module_param(autorecal, bool, 0644);
+MODULE_PARM_DESC(autorecal, "enable recalibration in the driver");
+
+static char hgpk_mode_name[16];
+module_param_string(hgpk_mode, hgpk_mode_name, sizeof(hgpk_mode_name), 0644);
+MODULE_PARM_DESC(hgpk_mode,
+	"default hgpk mode: mouse, glidesensor or pentablet");
+
+static int hgpk_default_mode = HGPK_MODE_MOUSE;
+
+static const char * const hgpk_mode_names[] = {
+	[HGPK_MODE_MOUSE] = "Mouse",
+	[HGPK_MODE_GLIDESENSOR] = "GlideSensor",
+	[HGPK_MODE_PENTABLET] = "PenTablet",
+};
+
+static int hgpk_mode_from_name(const char *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(hgpk_mode_names); i++) {
+		const char *name = hgpk_mode_names[i];
+		if (strlen(name) == len && !strncasecmp(name, buf, len))
+			return i;
+	}
+
+	return HGPK_MODE_INVALID;
+}
+
+/*
+ * see if new value is within 20% of half of old value
+ */
+static int approx_half(int curr, int prev)
+{
+	int belowhalf, abovehalf;
+
+	if (curr < 5 || prev < 5)
+		return 0;
+
+	belowhalf = (prev * 8) / 20;
+	abovehalf = (prev * 12) / 20;
+
+	return belowhalf < curr && curr <= abovehalf;
+}
+
 /*
- * When the touchpad gets ultra-sensitive, one can keep their finger 1/2"
- * above the pad and still have it send packets.  This causes a jump cursor
- * when one places their finger on the pad.  We can probably detect the
- * jump as we see a large deltas (>= 100px).  In mouse mode, I've been
- * unable to even come close to 100px deltas during normal usage, so I think
- * this threshold is safe.  If a large delta occurs, trigger a recalibration.
+ * Throw out oddly large delta packets, and any that immediately follow whose
+ * values are each approximately half of the previous.  It seems that the ALPS
+ * firmware emits errant packets, and they get averaged out slowly.
  */
-static void hgpk_jumpy_hack(struct psmouse *psmouse, int x, int y)
+static int hgpk_discard_decay_hack(struct psmouse *psmouse, int x, int y)
 {
 	struct hgpk_data *priv = psmouse->private;
+	int avx, avy;
+	bool do_recal = false;
+
+	avx = abs(x);
+	avy = abs(y);
+
+	/* discard if too big, or half that but > 4 times the prev delta */
+	if (avx > recalib_delta ||
+		(avx > recalib_delta / 2 && ((avx / 4) > priv->xlast))) {
+		hgpk_err(psmouse, "detected %dpx jump in x\n", x);
+		priv->xbigj = avx;
+	} else if (approx_half(avx, priv->xbigj)) {
+		hgpk_err(psmouse, "detected secondary %dpx jump in x\n", x);
+		priv->xbigj = avx;
+		priv->xsaw_secondary++;
+	} else {
+		if (priv->xbigj && priv->xsaw_secondary > 1)
+			do_recal = true;
+		priv->xbigj = 0;
+		priv->xsaw_secondary = 0;
+	}
+
+	if (avy > recalib_delta ||
+		(avy > recalib_delta / 2 && ((avy / 4) > priv->ylast))) {
+		hgpk_err(psmouse, "detected %dpx jump in y\n", y);
+		priv->ybigj = avy;
+	} else if (approx_half(avy, priv->ybigj)) {
+		hgpk_err(psmouse, "detected secondary %dpx jump in y\n", y);
+		priv->ybigj = avy;
+		priv->ysaw_secondary++;
+	} else {
+		if (priv->ybigj && priv->ysaw_secondary > 1)
+			do_recal = true;
+		priv->ybigj = 0;
+		priv->ysaw_secondary = 0;
+	}
 
-	if (abs(x) > recalib_delta || abs(y) > recalib_delta) {
-		hgpk_err(psmouse, ">%dpx jump detected (%d,%d)\n",
-				recalib_delta, x, y);
-		/* My car gets forty rods to the hogshead and that's the
-		 * way I likes it! */
+	priv->xlast = avx;
+	priv->ylast = avy;
+
+	if (do_recal && jumpy_delay) {
+		hgpk_err(psmouse, "scheduling recalibration\n");
 		psmouse_queue_work(psmouse, &priv->recalib_wq,
 				msecs_to_jiffies(jumpy_delay));
 	}
+
+	return priv->xbigj || priv->ybigj;
+}
+
+static void hgpk_reset_spew_detection(struct hgpk_data *priv)
+{
+	priv->spew_count = 0;
+	priv->dupe_count = 0;
+	priv->x_tally = 0;
+	priv->y_tally = 0;
+	priv->spew_flag = NO_SPEW;
+}
+
+static void hgpk_reset_hack_state(struct psmouse *psmouse)
+{
+	struct hgpk_data *priv = psmouse->private;
+
+	priv->abs_x = priv->abs_y = -1;
+	priv->xlast = priv->ylast = ILLEGAL_XY;
+	priv->xbigj = priv->ybigj = 0;
+	priv->xsaw_secondary = priv->ysaw_secondary = 0;
+	hgpk_reset_spew_detection(priv);
 }
 
 /*
@@ -116,20 +220,57 @@ static void hgpk_spewing_hack(struct psmouse *psmouse,
 	if (l || r)
 		return;
 
+	/* don't track spew if the workaround feature has been turned off */
+	if (!spew_delay)
+		return;
+
+	if (abs(x) > 3 || abs(y) > 3) {
+		/* no spew, or spew ended */
+		hgpk_reset_spew_detection(priv);
+		return;
+	}
+
+	/* Keep a tally of the overall delta to the cursor position caused by
+	 * the spew */
 	priv->x_tally += x;
 	priv->y_tally += y;
 
-	if (++priv->count > 100) {
+	switch (priv->spew_flag) {
+	case NO_SPEW:
+		/* we're not spewing, but this packet might be the start */
+		priv->spew_flag = MAYBE_SPEWING;
+
+		/* fall-through */
+
+	case MAYBE_SPEWING:
+		priv->spew_count++;
+
+		if (priv->spew_count < SPEW_WATCH_COUNT)
+			break;
+
+		/* excessive spew detected, request recalibration */
+		priv->spew_flag = SPEW_DETECTED;
+
+		/* fall-through */
+
+	case SPEW_DETECTED:
+		/* only recalibrate when the overall delta to the cursor
+		 * is really small. if the spew is causing significant cursor
+		 * movement, it is probably a case of the user moving the
+		 * cursor very slowly across the screen. */
 		if (abs(priv->x_tally) < 3 && abs(priv->y_tally) < 3) {
-			hgpk_dbg(psmouse, "packet spew detected (%d,%d)\n",
+			hgpk_err(psmouse, "packet spew detected (%d,%d)\n",
 				 priv->x_tally, priv->y_tally);
+			priv->spew_flag = RECALIBRATING;
 			psmouse_queue_work(psmouse, &priv->recalib_wq,
 					   msecs_to_jiffies(spew_delay));
 		}
-		/* reset every 100 packets */
-		priv->count = 0;
-		priv->x_tally = 0;
-		priv->y_tally = 0;
+
+		break;
+	case RECALIBRATING:
+		/* we already detected a spew and requested a recalibration,
+		 * just wait for the queue to kick into action. */
+		break;
 	}
 }
 
@@ -143,25 +284,168 @@ static void hgpk_spewing_hack(struct psmouse *psmouse,
  * swr/swl are the left/right buttons.
  * x-neg/y-neg are the x and y delta negative bits
  * x-over/y-over are the x and y overflow bits
+ *
+ * ---
+ *
+ * HGPK Advanced Mode - single-mode format
+ *
+ * byte 0(PT):  1    1    0    0    1    1     1     1
+ * byte 0(GS):  1    1    1    1    1    1     1     1
+ * byte 1:      0   x6   x5   x4   x3   x2    x1    x0
+ * byte 2(PT):  0    0   x9   x8   x7    ? pt-dsw    0
+ * byte 2(GS):  0  x10   x9   x8   x7    ? gs-dsw pt-dsw
+ * byte 3:      0   y9   y8   y7    1    0   swr   swl
+ * byte 4:      0   y6   y5   y4   y3   y2    y1    y0
+ * byte 5:      0   z6   z5   z4   z3   z2    z1    z0
+ *
+ * ?'s are not defined in the protocol spec, may vary between models.
+ *
+ * swr/swl are the left/right buttons.
+ *
+ * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a
+ * pen/finger
  */
-static int hgpk_validate_byte(unsigned char *packet)
+static bool hgpk_is_byte_valid(struct psmouse *psmouse, unsigned char *packet)
 {
-	return (packet[0] & 0x0C) != 0x08;
+	struct hgpk_data *priv = psmouse->private;
+	int pktcnt = psmouse->pktcnt;
+	bool valid;
+
+	switch (priv->mode) {
+	case HGPK_MODE_MOUSE:
+		valid = (packet[0] & 0x0C) == 0x08;
+		break;
+
+	case HGPK_MODE_GLIDESENSOR:
+		valid = pktcnt == 1 ?
+			packet[0] == HGPK_GS : !(packet[pktcnt - 1] & 0x80);
+		break;
+
+	case HGPK_MODE_PENTABLET:
+		valid = pktcnt == 1 ?
+			packet[0] == HGPK_PT : !(packet[pktcnt - 1] & 0x80);
+		break;
+
+	default:
+		valid = false;
+		break;
+	}
+
+	if (!valid)
+		hgpk_dbg(psmouse,
+			 "bad data, mode %d (%d) %02x %02x %02x %02x %02x %02x\n",
+			 priv->mode, pktcnt,
+			 psmouse->packet[0], psmouse->packet[1],
+			 psmouse->packet[2], psmouse->packet[3],
+			 psmouse->packet[4], psmouse->packet[5]);
+
+	return valid;
 }
 
-static void hgpk_process_packet(struct psmouse *psmouse)
+static void hgpk_process_advanced_packet(struct psmouse *psmouse)
 {
-	struct input_dev *dev = psmouse->dev;
+	struct hgpk_data *priv = psmouse->private;
+	struct input_dev *idev = psmouse->dev;
 	unsigned char *packet = psmouse->packet;
-	int x, y, left, right;
+	int down = !!(packet[2] & 2);
+	int left = !!(packet[3] & 1);
+	int right = !!(packet[3] & 2);
+	int x = packet[1] | ((packet[2] & 0x78) << 4);
+	int y = packet[4] | ((packet[3] & 0x70) << 3);
+
+	if (priv->mode == HGPK_MODE_GLIDESENSOR) {
+		int pt_down = !!(packet[2] & 1);
+		int finger_down = !!(packet[2] & 2);
+		int z = packet[5];
+
+		input_report_abs(idev, ABS_PRESSURE, z);
+		if (tpdebug)
+			hgpk_dbg(psmouse, "pd=%d fd=%d z=%d",
+				 pt_down, finger_down, z);
+	} else {
+		/*
+		 * PenTablet mode does not report pressure, so we don't
+		 * report it here
+		 */
+		if (tpdebug)
+			hgpk_dbg(psmouse, "pd=%d ", down);
+	}
+
+	if (tpdebug)
+		hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y);
+
+	input_report_key(idev, BTN_TOUCH, down);
+	input_report_key(idev, BTN_LEFT, left);
+	input_report_key(idev, BTN_RIGHT, right);
+
+	/*
+	 * If this packet says that the finger was removed, reset our position
+	 * tracking so that we don't erroneously detect a jump on next press.
+	 */
+	if (!down) {
+		hgpk_reset_hack_state(psmouse);
+		goto done;
+	}
+
+	/*
+	 * Weed out duplicate packets (we get quite a few, and they mess up
+	 * our jump detection)
+	 */
+	if (x == priv->abs_x && y == priv->abs_y) {
+		if (++priv->dupe_count > SPEW_WATCH_COUNT) {
+			if (tpdebug)
+				hgpk_dbg(psmouse, "hard spew detected\n");
+			priv->spew_flag = RECALIBRATING;
+			psmouse_queue_work(psmouse, &priv->recalib_wq,
+					   msecs_to_jiffies(spew_delay));
+		}
+		goto done;
+	}
 
-	left = packet[0] & 1;
-	right = (packet[0] >> 1) & 1;
+	/* not a duplicate, continue with position reporting */
+	priv->dupe_count = 0;
+
+	/* Don't apply hacks in PT mode, it seems reliable */
+	if (priv->mode != HGPK_MODE_PENTABLET && priv->abs_x != -1) {
+		int x_diff = priv->abs_x - x;
+		int y_diff = priv->abs_y - y;
+		if (hgpk_discard_decay_hack(psmouse, x_diff, y_diff)) {
+			if (tpdebug)
+				hgpk_dbg(psmouse, "discarding\n");
+			goto done;
+		}
+		hgpk_spewing_hack(psmouse, left, right, x_diff, y_diff);
+	}
 
-	x = packet[1] - ((packet[0] << 4) & 0x100);
-	y = ((packet[0] << 3) & 0x100) - packet[2];
+	input_report_abs(idev, ABS_X, x);
+	input_report_abs(idev, ABS_Y, y);
+	priv->abs_x = x;
+	priv->abs_y = y;
+
+done:
+	input_sync(idev);
+}
+
+static void hgpk_process_simple_packet(struct psmouse *psmouse)
+{
+	struct input_dev *dev = psmouse->dev;
+	unsigned char *packet = psmouse->packet;
+	int left = packet[0] & 1;
+	int right = (packet[0] >> 1) & 1;
+	int x = packet[1] - ((packet[0] << 4) & 0x100);
+	int y = ((packet[0] << 3) & 0x100) - packet[2];
+
+	if (packet[0] & 0xc0)
+		hgpk_dbg(psmouse,
+			 "overflow -- 0x%02x 0x%02x 0x%02x\n",
+			 packet[0], packet[1], packet[2]);
+
+	if (hgpk_discard_decay_hack(psmouse, x, y)) {
+		if (tpdebug)
+			hgpk_dbg(psmouse, "discarding\n");
+		return;
+	}
 
-	hgpk_jumpy_hack(psmouse, x, y);
 	hgpk_spewing_hack(psmouse, left, right, x, y);
 
 	if (tpdebug)
@@ -180,15 +464,14 @@ static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse)
 {
 	struct hgpk_data *priv = psmouse->private;
 
-	if (hgpk_validate_byte(psmouse->packet)) {
-		hgpk_dbg(psmouse, "%s: (%d) %02x %02x %02x\n",
-				__func__, psmouse->pktcnt, psmouse->packet[0],
-				psmouse->packet[1], psmouse->packet[2]);
+	if (!hgpk_is_byte_valid(psmouse, psmouse->packet))
 		return PSMOUSE_BAD_DATA;
-	}
 
 	if (psmouse->pktcnt >= psmouse->pktsize) {
-		hgpk_process_packet(psmouse);
+		if (priv->mode == HGPK_MODE_MOUSE)
+			hgpk_process_simple_packet(psmouse);
+		else
+			hgpk_process_advanced_packet(psmouse);
 		return PSMOUSE_FULL_PACKET;
 	}
 
@@ -210,33 +493,176 @@ static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse)
 	return PSMOUSE_GOOD_DATA;
 }
 
+static int hgpk_select_mode(struct psmouse *psmouse)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	struct hgpk_data *priv = psmouse->private;
+	int i;
+	int cmd;
+
+	/*
+	 * 4 disables to enable advanced mode
+	 * then 3 0xf2 bytes as the preamble for GS/PT selection
+	 */
+	const int advanced_init[] = {
+		PSMOUSE_CMD_DISABLE, PSMOUSE_CMD_DISABLE,
+		PSMOUSE_CMD_DISABLE, PSMOUSE_CMD_DISABLE,
+		0xf2, 0xf2, 0xf2,
+	};
+
+	switch (priv->mode) {
+	case HGPK_MODE_MOUSE:
+		psmouse->pktsize = 3;
+		break;
+
+	case HGPK_MODE_GLIDESENSOR:
+	case HGPK_MODE_PENTABLET:
+		psmouse->pktsize = 6;
+
+		/* Switch to 'Advanced mode.', four disables in a row. */
+		for (i = 0; i < ARRAY_SIZE(advanced_init); i++)
+			if (ps2_command(ps2dev, NULL, advanced_init[i]))
+				return -EIO;
+
+		/* select between GlideSensor (mouse) or PenTablet */
+		cmd = priv->mode == HGPK_MODE_GLIDESENSOR ?
+			PSMOUSE_CMD_SETSCALE11 : PSMOUSE_CMD_SETSCALE21;
+
+		if (ps2_command(ps2dev, NULL, cmd))
+			return -EIO;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void hgpk_setup_input_device(struct input_dev *input,
+				    struct input_dev *old_input,
+				    enum hgpk_mode mode)
+{
+	if (old_input) {
+		input->name = old_input->name;
+		input->phys = old_input->phys;
+		input->id = old_input->id;
+		input->dev.parent = old_input->dev.parent;
+	}
+
+	memset(input->evbit, 0, sizeof(input->evbit));
+	memset(input->relbit, 0, sizeof(input->relbit));
+	memset(input->keybit, 0, sizeof(input->keybit));
+
+	/* All modes report left and right buttons */
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(BTN_LEFT, input->keybit);
+	__set_bit(BTN_RIGHT, input->keybit);
+
+	switch (mode) {
+	case HGPK_MODE_MOUSE:
+		__set_bit(EV_REL, input->evbit);
+		__set_bit(REL_X, input->relbit);
+		__set_bit(REL_Y, input->relbit);
+		break;
+
+	case HGPK_MODE_GLIDESENSOR:
+		__set_bit(BTN_TOUCH, input->keybit);
+		__set_bit(BTN_TOOL_FINGER, input->keybit);
+
+		__set_bit(EV_ABS, input->evbit);
+
+		/* GlideSensor has pressure sensor, PenTablet does not */
+		input_set_abs_params(input, ABS_PRESSURE, 0, 15, 0, 0);
+
+		/* From device specs */
+		input_set_abs_params(input, ABS_X, 0, 399, 0, 0);
+		input_set_abs_params(input, ABS_Y, 0, 290, 0, 0);
+
+		/* Calculated by hand based on usable size (52mm x 38mm) */
+		input_abs_set_res(input, ABS_X, 8);
+		input_abs_set_res(input, ABS_Y, 8);
+		break;
+
+	case HGPK_MODE_PENTABLET:
+		__set_bit(BTN_TOUCH, input->keybit);
+		__set_bit(BTN_TOOL_FINGER, input->keybit);
+
+		__set_bit(EV_ABS, input->evbit);
+
+		/* From device specs */
+		input_set_abs_params(input, ABS_X, 0, 999, 0, 0);
+		input_set_abs_params(input, ABS_Y, 5, 239, 0, 0);
+
+		/* Calculated by hand based on usable size (156mm x 38mm) */
+		input_abs_set_res(input, ABS_X, 6);
+		input_abs_set_res(input, ABS_Y, 8);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+static int hgpk_reset_device(struct psmouse *psmouse, bool recalibrate)
+{
+	int err;
+
+	psmouse_reset(psmouse);
+
+	if (recalibrate) {
+		struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+		/* send the recalibrate request */
+		if (ps2_command(ps2dev, NULL, 0xf5) ||
+		    ps2_command(ps2dev, NULL, 0xf5) ||
+		    ps2_command(ps2dev, NULL, 0xe6) ||
+		    ps2_command(ps2dev, NULL, 0xf5)) {
+			return -1;
+		}
+
+		/* according to ALPS, 150mS is required for recalibration */
+		msleep(150);
+	}
+
+	err = hgpk_select_mode(psmouse);
+	if (err) {
+		hgpk_err(psmouse, "failed to select mode\n");
+		return err;
+	}
+
+	hgpk_reset_hack_state(psmouse);
+
+	return 0;
+}
+
 static int hgpk_force_recalibrate(struct psmouse *psmouse)
 {
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
 	struct hgpk_data *priv = psmouse->private;
+	int err;
 
 	/* C-series touchpads added the recalibrate command */
 	if (psmouse->model < HGPK_MODEL_C)
 		return 0;
 
+	if (!autorecal) {
+		hgpk_dbg(psmouse, "recalibrations disabled, ignoring\n");
+		return 0;
+	}
+
+	hgpk_dbg(psmouse, "recalibrating touchpad..\n");
+
 	/* we don't want to race with the irq handler, nor with resyncs */
 	psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
 
 	/* start by resetting the device */
-	psmouse_reset(psmouse);
-
-	/* send the recalibrate request */
-	if (ps2_command(ps2dev, NULL, 0xf5) ||
-	    ps2_command(ps2dev, NULL, 0xf5) ||
-	    ps2_command(ps2dev, NULL, 0xe6) ||
-	    ps2_command(ps2dev, NULL, 0xf5)) {
-		return -1;
-	}
-
-	/* according to ALPS, 150mS is required for recalibration */
-	msleep(150);
+	err = hgpk_reset_device(psmouse, true);
+	if (err)
+		return err;
 
-	/* XXX: If a finger is down during this delay, recalibration will
+	/*
+	 * XXX: If a finger is down during this delay, recalibration will
 	 * detect capacitance incorrectly.  This is a hardware bug, and
 	 * we don't have a good way to deal with it.  The 2s window stuff
 	 * (below) is our best option for now.
@@ -247,25 +673,35 @@ static int hgpk_force_recalibrate(struct psmouse *psmouse)
 
 	psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
 
-	/* After we recalibrate, we shouldn't get any packets for 2s.  If
-	 * we do, it's likely that someone's finger was on the touchpad.
-	 * If someone's finger *was* on the touchpad, it's probably
-	 * miscalibrated.  So, we should schedule another recalibration
+	if (tpdebug)
+		hgpk_dbg(psmouse, "touchpad reactivated\n");
+
+	/*
+	 * If we get packets right away after recalibrating, it's likely
+	 * that a finger was on the touchpad.  If so, it's probably
+	 * miscalibrated, so we optionally schedule another.
 	 */
-	priv->recalib_window = jiffies +  msecs_to_jiffies(recal_guard_time);
+	if (recal_guard_time)
+		priv->recalib_window = jiffies +
+			msecs_to_jiffies(recal_guard_time);
 
 	return 0;
 }
 
 /*
- * This kills power to the touchpad; according to ALPS, current consumption
- * goes down to 50uA after running this.  To turn power back on, we drive
- * MS-DAT low.
+ * This puts the touchpad in a power saving mode; according to ALPS, current
+ * consumption goes down to 50uA after running this.  To turn power back on,
+ * we drive MS-DAT low.  Measuring with a 1mA resolution ammeter says that
+ * the current on the SUS_3.3V rail drops from 3mA or 4mA to 0 when we do this.
+ *
+ * We have no formal spec that details this operation -- the low-power
+ * sequence came from a long-lost email trail.
  */
-static int hgpk_toggle_power(struct psmouse *psmouse, int enable)
+static int hgpk_toggle_powersave(struct psmouse *psmouse, int enable)
 {
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
 	int timeo;
+	int err;
 
 	/* Added on D-series touchpads */
 	if (psmouse->model < HGPK_MODEL_D)
@@ -279,24 +715,27 @@ static int hgpk_toggle_power(struct psmouse *psmouse, int enable)
 		 * the controller.  Once we get an ACK back from it, it
 		 * means we can continue with the touchpad re-init.  ALPS
 		 * tells us that 1s should be long enough, so set that as
-		 * the upper bound.
+		 * the upper bound. (in practice, it takes about 3 loops.)
 		 */
 		for (timeo = 20; timeo > 0; timeo--) {
 			if (!ps2_sendbyte(&psmouse->ps2dev,
 					PSMOUSE_CMD_DISABLE, 20))
 				break;
-			msleep(50);
+			msleep(25);
 		}
 
-		psmouse_reset(psmouse);
+		err = hgpk_reset_device(psmouse, false);
+		if (err) {
+			hgpk_err(psmouse, "Failed to reset device!\n");
+			return err;
+		}
 
 		/* should be all set, enable the touchpad */
 		ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE);
 		psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
-
+		hgpk_dbg(psmouse, "Touchpad powered up.\n");
 	} else {
 		hgpk_dbg(psmouse, "Powering off touchpad.\n");
-		psmouse_set_state(psmouse, PSMOUSE_IGNORE);
 
 		if (ps2_command(ps2dev, NULL, 0xec) ||
 		    ps2_command(ps2dev, NULL, 0xec) ||
@@ -304,6 +743,8 @@ static int hgpk_toggle_power(struct psmouse *psmouse, int enable)
 			return -1;
 		}
 
+		psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+
 		/* probably won't see an ACK, the touchpad will be off */
 		ps2_sendbyte(&psmouse->ps2dev, 0xec, 20);
 	}
@@ -319,17 +760,20 @@ static int hgpk_poll(struct psmouse *psmouse)
 
 static int hgpk_reconnect(struct psmouse *psmouse)
 {
-	/* During suspend/resume the ps2 rails remain powered.  We don't want
+	struct hgpk_data *priv = psmouse->private;
+
+	/*
+	 * During suspend/resume the ps2 rails remain powered.  We don't want
 	 * to do a reset because it's flush data out of buffers; however,
-	 * earlier prototypes (B1) had some brokenness that required a reset. */
+	 * earlier prototypes (B1) had some brokenness that required a reset.
+	 */
 	if (olpc_board_at_least(olpc_board(0xb2)))
 		if (psmouse->ps2dev.serio->dev.power.power_state.event !=
 				PM_EVENT_ON)
 			return 0;
 
-	psmouse_reset(psmouse);
-
-	return 0;
+	priv->powered = 1;
+	return hgpk_reset_device(psmouse, false);
 }
 
 static ssize_t hgpk_show_powered(struct psmouse *psmouse, void *data, char *buf)
@@ -355,7 +799,7 @@ static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data,
 		 * hgpk_toggle_power will deal w/ state so
 		 * we're not racing w/ irq
 		 */
-		err = hgpk_toggle_power(psmouse, value);
+		err = hgpk_toggle_powersave(psmouse, value);
 		if (!err)
 			priv->powered = value;
 	}
@@ -366,6 +810,65 @@ static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data,
 __PSMOUSE_DEFINE_ATTR(powered, S_IWUSR | S_IRUGO, NULL,
 		      hgpk_show_powered, hgpk_set_powered, false);
 
+static ssize_t attr_show_mode(struct psmouse *psmouse, void *data, char *buf)
+{
+	struct hgpk_data *priv = psmouse->private;
+
+	return sprintf(buf, "%s\n", hgpk_mode_names[priv->mode]);
+}
+
+static ssize_t attr_set_mode(struct psmouse *psmouse, void *data,
+			     const char *buf, size_t len)
+{
+	struct hgpk_data *priv = psmouse->private;
+	enum hgpk_mode old_mode = priv->mode;
+	enum hgpk_mode new_mode = hgpk_mode_from_name(buf, len);
+	struct input_dev *old_dev = psmouse->dev;
+	struct input_dev *new_dev;
+	int err;
+
+	if (new_mode == HGPK_MODE_INVALID)
+		return -EINVAL;
+
+	if (old_mode == new_mode)
+		return len;
+
+	new_dev = input_allocate_device();
+	if (!new_dev)
+		return -ENOMEM;
+
+	psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
+
+	/* Switch device into the new mode */
+	priv->mode = new_mode;
+	err = hgpk_reset_device(psmouse, false);
+	if (err)
+		goto err_try_restore;
+
+	hgpk_setup_input_device(new_dev, old_dev, new_mode);
+
+	psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
+
+	err = input_register_device(new_dev);
+	if (err)
+		goto err_try_restore;
+
+	psmouse->dev = new_dev;
+	input_unregister_device(old_dev);
+
+	return len;
+
+err_try_restore:
+	input_free_device(new_dev);
+	priv->mode = old_mode;
+	hgpk_reset_device(psmouse, false);
+
+	return err;
+}
+
+PSMOUSE_DEFINE_ATTR(hgpk_mode, S_IWUSR | S_IRUGO, NULL,
+		    attr_show_mode, attr_set_mode);
+
 static ssize_t hgpk_trigger_recal_show(struct psmouse *psmouse,
 		void *data, char *buf)
 {
@@ -401,6 +904,8 @@ static void hgpk_disconnect(struct psmouse *psmouse)
 
 	device_remove_file(&psmouse->ps2dev.serio->dev,
 			   &psmouse_attr_powered.dattr);
+	device_remove_file(&psmouse->ps2dev.serio->dev,
+			   &psmouse_attr_hgpk_mode.dattr);
 
 	if (psmouse->model >= HGPK_MODEL_C)
 		device_remove_file(&psmouse->ps2dev.serio->dev,
@@ -416,14 +921,13 @@ static void hgpk_recalib_work(struct work_struct *work)
 	struct hgpk_data *priv = container_of(w, struct hgpk_data, recalib_wq);
 	struct psmouse *psmouse = priv->psmouse;
 
-	hgpk_dbg(psmouse, "recalibrating touchpad..\n");
-
 	if (hgpk_force_recalibrate(psmouse))
 		hgpk_err(psmouse, "recalibration failed!\n");
 }
 
 static int hgpk_register(struct psmouse *psmouse)
 {
+	struct hgpk_data *priv = psmouse->private;
 	int err;
 
 	/* register handlers */
@@ -431,13 +935,14 @@ static int hgpk_register(struct psmouse *psmouse)
 	psmouse->poll = hgpk_poll;
 	psmouse->disconnect = hgpk_disconnect;
 	psmouse->reconnect = hgpk_reconnect;
-	psmouse->pktsize = 3;
 
 	/* Disable the idle resync. */
 	psmouse->resync_time = 0;
 	/* Reset after a lot of bad bytes. */
 	psmouse->resetafter = 1024;
 
+	hgpk_setup_input_device(psmouse->dev, NULL, priv->mode);
+
 	err = device_create_file(&psmouse->ps2dev.serio->dev,
 				 &psmouse_attr_powered.dattr);
 	if (err) {
@@ -445,6 +950,13 @@ static int hgpk_register(struct psmouse *psmouse)
 		return err;
 	}
 
+	err = device_create_file(&psmouse->ps2dev.serio->dev,
+				 &psmouse_attr_hgpk_mode.dattr);
+	if (err) {
+		hgpk_err(psmouse, "Failed creating 'hgpk_mode' sysfs node\n");
+		goto err_remove_powered;
+	}
+
 	/* C-series touchpads added the recalibrate command */
 	if (psmouse->model >= HGPK_MODEL_C) {
 		err = device_create_file(&psmouse->ps2dev.serio->dev,
@@ -452,30 +964,40 @@ static int hgpk_register(struct psmouse *psmouse)
 		if (err) {
 			hgpk_err(psmouse,
 				"Failed creating 'recalibrate' sysfs node\n");
-			device_remove_file(&psmouse->ps2dev.serio->dev,
-					&psmouse_attr_powered.dattr);
-			return err;
+			goto err_remove_mode;
 		}
 	}
 
 	return 0;
+
+err_remove_mode:
+	device_remove_file(&psmouse->ps2dev.serio->dev,
+			   &psmouse_attr_hgpk_mode.dattr);
+err_remove_powered:
+	device_remove_file(&psmouse->ps2dev.serio->dev,
+			   &psmouse_attr_powered.dattr);
+	return err;
 }
 
 int hgpk_init(struct psmouse *psmouse)
 {
 	struct hgpk_data *priv;
-	int err = -ENOMEM;
+	int err;
 
 	priv = kzalloc(sizeof(struct hgpk_data), GFP_KERNEL);
-	if (!priv)
+	if (!priv) {
+		err = -ENOMEM;
 		goto alloc_fail;
+	}
 
 	psmouse->private = priv;
+
 	priv->psmouse = psmouse;
 	priv->powered = true;
+	priv->mode = hgpk_default_mode;
 	INIT_DELAYED_WORK(&priv->recalib_wq, hgpk_recalib_work);
 
-	err = psmouse_reset(psmouse);
+	err = hgpk_reset_device(psmouse, false);
 	if (err)
 		goto init_fail;
 
@@ -531,3 +1053,14 @@ int hgpk_detect(struct psmouse *psmouse, bool set_properties)
 
 	return 0;
 }
+
+void hgpk_module_init(void)
+{
+	hgpk_default_mode = hgpk_mode_from_name(hgpk_mode_name,
+						strlen(hgpk_mode_name));
+	if (hgpk_default_mode == HGPK_MODE_INVALID) {
+		hgpk_default_mode = HGPK_MODE_MOUSE;
+		strlcpy(hgpk_mode_name, hgpk_mode_names[HGPK_MODE_MOUSE],
+			sizeof(hgpk_mode_name));
+	}
+}
diff --git a/drivers/input/mouse/hgpk.h b/drivers/input/mouse/hgpk.h
index d61cfd3ee9c..311c0e87fcb 100644
--- a/drivers/input/mouse/hgpk.h
+++ b/drivers/input/mouse/hgpk.h
@@ -5,6 +5,9 @@
 #ifndef _HGPK_H
 #define _HGPK_H
 
+#define HGPK_GS		0xff       /* The GlideSensor */
+#define HGPK_PT		0xcf       /* The PenTablet */
+
 enum hgpk_model_t {
 	HGPK_MODEL_PREA = 0x0a,	/* pre-B1s */
 	HGPK_MODEL_A = 0x14,	/* found on B1s, PT disabled in hardware */
@@ -13,12 +16,34 @@ enum hgpk_model_t {
 	HGPK_MODEL_D = 0x50,	/* C1, mass production */
 };
 
+enum hgpk_spew_flag {
+	NO_SPEW,
+	MAYBE_SPEWING,
+	SPEW_DETECTED,
+	RECALIBRATING,
+};
+
+#define SPEW_WATCH_COUNT 42  /* at 12ms/packet, this is 1/2 second */
+
+enum hgpk_mode {
+	HGPK_MODE_MOUSE,
+	HGPK_MODE_GLIDESENSOR,
+	HGPK_MODE_PENTABLET,
+	HGPK_MODE_INVALID
+};
+
 struct hgpk_data {
 	struct psmouse *psmouse;
+	enum hgpk_mode mode;
 	bool powered;
-	int count, x_tally, y_tally;	/* hardware workaround stuff */
+	enum hgpk_spew_flag spew_flag;
+	int spew_count, x_tally, y_tally;	/* spew detection */
 	unsigned long recalib_window;
 	struct delayed_work recalib_wq;
+	int abs_x, abs_y;
+	int dupe_count;
+	int xbigj, ybigj, xlast, ylast; /* jumpiness detection */
+	int xsaw_secondary, ysaw_secondary; /* jumpiness detection */
 };
 
 #define hgpk_dbg(psmouse, format, arg...)		\
@@ -33,9 +58,13 @@ struct hgpk_data {
 	dev_notice(&(psmouse)->ps2dev.serio->dev, format, ## arg)
 
 #ifdef CONFIG_MOUSE_PS2_OLPC
+void hgpk_module_init(void);
 int hgpk_detect(struct psmouse *psmouse, bool set_properties);
 int hgpk_init(struct psmouse *psmouse);
 #else
+static inline void hgpk_module_init(void)
+{
+}
 static inline int hgpk_detect(struct psmouse *psmouse, bool set_properties)
 {
 	return -ENODEV;
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index cd9d0c97e42..3f74baee102 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -1711,6 +1711,7 @@ static int __init psmouse_init(void)
 
 	lifebook_module_init();
 	synaptics_module_init();
+	hgpk_module_init();
 
 	kpsmoused_wq = create_singlethread_workqueue("kpsmoused");
 	if (!kpsmoused_wq) {
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 2e300a46055..da392c22fc6 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -25,7 +25,7 @@
 
 #include <linux/module.h>
 #include <linux/dmi.h>
-#include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/serio.h>
 #include <linux/libps2.h>
 #include <linux/slab.h>
@@ -279,6 +279,25 @@ static void synaptics_set_rate(struct psmouse *psmouse, unsigned int rate)
 	synaptics_mode_cmd(psmouse, priv->mode);
 }
 
+static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse)
+{
+	static unsigned char param = 0xc8;
+	struct synaptics_data *priv = psmouse->private;
+
+	if (!SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
+		return 0;
+
+	if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL))
+		return -1;
+	if (ps2_command(&psmouse->ps2dev, &param, PSMOUSE_CMD_SETRATE))
+		return -1;
+
+	/* Advanced gesture mode also sends multi finger data */
+	priv->capabilities |= BIT(1);
+
+	return 0;
+}
+
 /*****************************************************************************
  *	Synaptics pass-through PS/2 port support
  ****************************************************************************/
@@ -380,7 +399,9 @@ static void synaptics_pt_create(struct psmouse *psmouse)
  *	Functions to interpret the absolute mode packets
  ****************************************************************************/
 
-static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data *priv, struct synaptics_hw_state *hw)
+static int synaptics_parse_hw_state(const unsigned char buf[],
+				    struct synaptics_data *priv,
+				    struct synaptics_hw_state *hw)
 {
 	memset(hw, 0, sizeof(struct synaptics_hw_state));
 
@@ -397,6 +418,14 @@ static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data
 			 ((buf[0] & 0x04) >> 1) |
 			 ((buf[3] & 0x04) >> 2));
 
+		if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) && hw->w == 2) {
+			/* Gesture packet: (x, y, z) at half resolution */
+			priv->mt.x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1;
+			priv->mt.y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1;
+			priv->mt.z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1;
+			return 1;
+		}
+
 		hw->left  = (buf[0] & 0x01) ? 1 : 0;
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 
@@ -452,6 +481,36 @@ static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data
 		hw->left  = (buf[0] & 0x01) ? 1 : 0;
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 	}
+
+	return 0;
+}
+
+static void set_slot(struct input_dev *dev, int slot, bool active, int x, int y)
+{
+	input_mt_slot(dev, slot);
+	input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
+	if (active) {
+		input_report_abs(dev, ABS_MT_POSITION_X, x);
+		input_report_abs(dev, ABS_MT_POSITION_Y,
+				 YMAX_NOMINAL + YMIN_NOMINAL - y);
+	}
+}
+
+static void synaptics_report_semi_mt_data(struct input_dev *dev,
+					  const struct synaptics_hw_state *a,
+					  const struct synaptics_hw_state *b,
+					  int num_fingers)
+{
+	if (num_fingers >= 2) {
+		set_slot(dev, 0, true, min(a->x, b->x), min(a->y, b->y));
+		set_slot(dev, 1, true, max(a->x, b->x), max(a->y, b->y));
+	} else if (num_fingers == 1) {
+		set_slot(dev, 0, true, a->x, a->y);
+		set_slot(dev, 1, false, 0, 0);
+	} else {
+		set_slot(dev, 0, false, 0, 0);
+		set_slot(dev, 1, false, 0, 0);
+	}
 }
 
 /*
@@ -466,7 +525,8 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 	int finger_width;
 	int i;
 
-	synaptics_parse_hw_state(psmouse->packet, priv, &hw);
+	if (synaptics_parse_hw_state(psmouse->packet, priv, &hw))
+		return;
 
 	if (hw.scroll) {
 		priv->scroll += hw.scroll;
@@ -488,7 +548,7 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 		return;
 	}
 
-	if (hw.z > 0) {
+	if (hw.z > 0 && hw.x > 1) {
 		num_fingers = 1;
 		finger_width = 5;
 		if (SYN_CAP_EXTENDED(priv->capabilities)) {
@@ -512,6 +572,9 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 		finger_width = 0;
 	}
 
+	if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
+		synaptics_report_semi_mt_data(dev, &hw, &priv->mt, num_fingers);
+
 	/* Post events
 	 * BTN_TOUCH has to be first as mousedev relies on it when doing
 	 * absolute -> relative conversion
@@ -519,7 +582,7 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 	if (hw.z > 30) input_report_key(dev, BTN_TOUCH, 1);
 	if (hw.z < 25) input_report_key(dev, BTN_TOUCH, 0);
 
-	if (hw.z > 0) {
+	if (num_fingers > 0) {
 		input_report_abs(dev, ABS_X, hw.x);
 		input_report_abs(dev, ABS_Y, YMAX_NOMINAL + YMIN_NOMINAL - hw.y);
 	}
@@ -622,6 +685,8 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 {
 	int i;
 
+	__set_bit(INPUT_PROP_POINTER, dev->propbit);
+
 	__set_bit(EV_ABS, dev->evbit);
 	input_set_abs_params(dev, ABS_X,
 			     XMIN_NOMINAL, priv->x_max ?: XMAX_NOMINAL, 0, 0);
@@ -629,6 +694,15 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 			     YMIN_NOMINAL, priv->y_max ?: YMAX_NOMINAL, 0, 0);
 	input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
 
+	if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) {
+		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
+		input_mt_init_slots(dev, 2);
+		input_set_abs_params(dev, ABS_MT_POSITION_X, XMIN_NOMINAL,
+				     priv->x_max ?: XMAX_NOMINAL, 0, 0);
+		input_set_abs_params(dev, ABS_MT_POSITION_Y, YMIN_NOMINAL,
+				     priv->y_max ?: YMAX_NOMINAL, 0, 0);
+	}
+
 	if (SYN_CAP_PALMDETECT(priv->capabilities))
 		input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
 
@@ -663,6 +737,7 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 	input_abs_set_res(dev, ABS_Y, priv->y_res);
 
 	if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+		__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
 		/* Clickpads report only left button */
 		__clear_bit(BTN_RIGHT, dev->keybit);
 		__clear_bit(BTN_MIDDLE, dev->keybit);
@@ -702,6 +777,11 @@ static int synaptics_reconnect(struct psmouse *psmouse)
 		return -1;
 	}
 
+	if (synaptics_set_advanced_gesture_mode(psmouse)) {
+		printk(KERN_ERR "Advanced gesture mode reconnect failed.\n");
+		return -1;
+	}
+
 	return 0;
 }
 
@@ -744,15 +824,45 @@ static const struct dmi_system_id __initconst toshiba_dmi_table[] = {
 #endif
 };
 
+static bool broken_olpc_ec;
+
+static const struct dmi_system_id __initconst olpc_dmi_table[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_OLPC)
+	{
+		/* OLPC XO-1 or XO-1.5 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "OLPC"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XO"),
+		},
+	},
+	{ }
+#endif
+};
+
 void __init synaptics_module_init(void)
 {
 	impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
+	broken_olpc_ec = dmi_check_system(olpc_dmi_table);
 }
 
 int synaptics_init(struct psmouse *psmouse)
 {
 	struct synaptics_data *priv;
 
+	/*
+	 * The OLPC XO has issues with Synaptics' absolute mode; similarly to
+	 * the HGPK, it quickly degrades and the hardware becomes jumpy and
+	 * overly sensitive.  Not only that, but the constant packet spew
+	 * (even at a lowered 40pps rate) overloads the EC such that key
+	 * presses on the keyboard are missed.  Given all of that, don't
+	 * even attempt to use Synaptics mode.  Relative mode seems to work
+	 * just fine.
+	 */
+	if (broken_olpc_ec) {
+		printk(KERN_INFO "synaptics: OLPC XO detected, not enabling Synaptics protocol.\n");
+		return -ENODEV;
+	}
+
 	psmouse->private = priv = kzalloc(sizeof(struct synaptics_data), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -769,6 +879,11 @@ int synaptics_init(struct psmouse *psmouse)
 		goto init_fail;
 	}
 
+	if (synaptics_set_advanced_gesture_mode(psmouse)) {
+		printk(KERN_ERR "Advanced gesture mode init failed.\n");
+		goto init_fail;
+	}
+
 	priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
 
 	printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
@@ -802,8 +917,8 @@ int synaptics_init(struct psmouse *psmouse)
 
 	/*
 	 * Toshiba's KBC seems to have trouble handling data from
-	 * Synaptics as full rate, switch to lower rate which is roughly
-	 * thye same as rate of standard PS/2 mouse.
+	 * Synaptics at full rate.  Switch to a lower rate (roughly
+	 * the same rate as a standard PS/2 mouse).
 	 */
 	if (psmouse->rate >= 80 && impaired_toshiba_kbc) {
 		printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n",
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 0aefaa88587..25e5d042a72 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -54,6 +54,7 @@
 #define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100000) /* 1-button ClickPad */
 #define SYN_CAP_CLICKPAD2BTN(ex0c)	((ex0c) & 0x000100) /* 2-button ClickPad */
 #define SYN_CAP_MAX_DIMENSIONS(ex0c)	((ex0c) & 0x020000)
+#define SYN_CAP_ADV_GESTURE(ex0c)	((ex0c) & 0x080000)
 
 /* synaptics modes query bits */
 #define SYN_MODE_ABSOLUTE(m)		((m) & (1 << 7))
@@ -113,6 +114,8 @@ struct synaptics_data {
 	int scroll;
 
 	struct serio *pt_port;			/* Pass-through serio port */
+
+	struct synaptics_hw_state mt;		/* current gesture packet */
 };
 
 void synaptics_module_init(void);
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 2a00ddf4f23..7630273e947 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -9,6 +9,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define MOUSEDEV_MINOR_BASE	32
 #define MOUSEDEV_MINORS		32
 #define MOUSEDEV_MIX		31
@@ -977,7 +979,7 @@ static int mousedev_connect(struct input_handler *handler,
 			break;
 
 	if (minor == MOUSEDEV_MINORS) {
-		printk(KERN_ERR "mousedev: no more free mousedev devices\n");
+		pr_err("no more free mousedev devices\n");
 		return -ENFILE;
 	}
 
@@ -1087,13 +1089,13 @@ static int __init mousedev_init(void)
 #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
 	error = misc_register(&psaux_mouse);
 	if (error)
-		printk(KERN_WARNING "mice: could not register psaux device, "
-			"error: %d\n", error);
+		pr_warning("could not register psaux device, error: %d\n",
+			   error);
 	else
 		psaux_registered = 1;
 #endif
 
-	printk(KERN_INFO "mice: PS/2 mouse device common for all mice\n");
+	pr_info("PS/2 mouse device common for all mice\n");
 
 	return 0;
 }
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index 8f1770e1e08..ebe95532567 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -172,6 +172,5 @@ static void __exit ams_delta_serio_exit(void)
 	free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
 	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
 	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
-	kfree(ams_delta_serio);
 }
 module_exit(ams_delta_serio_exit);
diff --git a/drivers/input/serio/ct82c710.c b/drivers/input/serio/ct82c710.c
index 4a3084695c0..448c7724beb 100644
--- a/drivers/input/serio/ct82c710.c
+++ b/drivers/input/serio/ct82c710.c
@@ -191,6 +191,9 @@ static int __devinit ct82c710_probe(struct platform_device *dev)
 
 	serio_register_port(ct82c710_port);
 
+	printk(KERN_INFO "serio: C&T 82c710 mouse port at %#llx irq %d\n",
+		(unsigned long long)CT82C710_DATA, CT82C710_IRQ);
+
 	return 0;
 }
 
@@ -237,11 +240,6 @@ static int __init ct82c710_init(void)
 	if (error)
 		goto err_free_device;
 
-	serio_register_port(ct82c710_port);
-
-	printk(KERN_INFO "serio: C&T 82c710 mouse port at %#llx irq %d\n",
-		(unsigned long long)CT82C710_DATA, CT82C710_IRQ);
-
 	return 0;
 
  err_free_device:
diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c
index e5624d8f170..bfd3865d886 100644
--- a/drivers/input/serio/hil_mlc.c
+++ b/drivers/input/serio/hil_mlc.c
@@ -932,6 +932,11 @@ int hil_mlc_register(hil_mlc *mlc)
 		hil_mlc_copy_di_scratch(mlc, i);
 		mlc_serio = kzalloc(sizeof(*mlc_serio), GFP_KERNEL);
 		mlc->serio[i] = mlc_serio;
+		if (!mlc->serio[i]) {
+			for (; i >= 0; i--)
+				kfree(mlc->serio[i]);
+			return -ENOMEM;
+		}
 		snprintf(mlc_serio->name, sizeof(mlc_serio->name)-1, "HIL_SERIO%d", i);
 		snprintf(mlc_serio->phys, sizeof(mlc_serio->phys)-1, "HIL%d", i);
 		mlc_serio->id			= hil_mlc_serio_id;
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index 7d2b820ef58..d50f0678bf4 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -305,6 +305,7 @@ static void hp_sdc_mlc_out(hil_mlc *mlc)
 static int __init hp_sdc_mlc_init(void)
 {
 	hil_mlc *mlc = &hp_sdc_mlc;
+	int err;
 
 #ifdef __mc68000__
 	if (!MACH_IS_HP300)
@@ -323,22 +324,21 @@ static int __init hp_sdc_mlc_init(void)
 	mlc->out = &hp_sdc_mlc_out;
 	mlc->priv = &hp_sdc_mlc_priv;
 
-	if (hil_mlc_register(mlc)) {
+	err = hil_mlc_register(mlc);
+	if (err) {
 		printk(KERN_WARNING PREFIX "Failed to register MLC structure with hil_mlc\n");
-		goto err0;
+		return err;
 	}
 
 	if (hp_sdc_request_hil_irq(&hp_sdc_mlc_isr)) {
 		printk(KERN_WARNING PREFIX "Request for raw HIL ISR hook denied\n");
-		goto err1;
+		if (hil_mlc_unregister(mlc))
+			printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n"
+				"This is bad.  Could cause an oops.\n");
+		return -EBUSY;
 	}
+
 	return 0;
- err1:
-	if (hil_mlc_unregister(mlc))
-		printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n"
-			"This is bad.  Could cause an oops.\n");
- err0:
-	return -EBUSY;
 }
 
 static void __exit hp_sdc_mlc_exit(void)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index a5475b57708..5ae0fc4578f 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -553,6 +553,13 @@ static const struct dmi_system_id __initconst i8042_dmi_laptop_table[] = {
  */
 static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = {
 	{
+		/* Acer Aspire 5100 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
+		},
+	},
+	{
 		/* Acer Aspire 5610 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -752,7 +759,7 @@ static int __init i8042_pnp_init(void)
 #endif
 
 	if (i8042_nopnp) {
-		printk(KERN_INFO "i8042: PNP detection disabled\n");
+		pr_info("PNP detection disabled\n");
 		return 0;
 	}
 
@@ -769,7 +776,7 @@ static int __init i8042_pnp_init(void)
 #if defined(__ia64__)
 		return -ENODEV;
 #else
-		printk(KERN_INFO "PNP: No PS/2 controller found. Probing ports directly.\n");
+		pr_info("PNP: No PS/2 controller found. Probing ports directly.\n");
 		return 0;
 #endif
 	}
@@ -781,7 +788,7 @@ static int __init i8042_pnp_init(void)
 		snprintf(aux_irq_str, sizeof(aux_irq_str),
 			"%d", i8042_pnp_aux_irq);
 
-	printk(KERN_INFO "PNP: PS/2 Controller [%s%s%s] at %#x,%#x irq %s%s%s\n",
+	pr_info("PNP: PS/2 Controller [%s%s%s] at %#x,%#x irq %s%s%s\n",
 		i8042_pnp_kbd_name, (i8042_pnp_kbd_devices && i8042_pnp_aux_devices) ? "," : "",
 		i8042_pnp_aux_name,
 		i8042_pnp_data_reg, i8042_pnp_command_reg,
@@ -798,9 +805,7 @@ static int __init i8042_pnp_init(void)
 	if (((i8042_pnp_data_reg & ~0xf) == (i8042_data_reg & ~0xf) &&
 	      i8042_pnp_data_reg != i8042_data_reg) ||
 	    !i8042_pnp_data_reg) {
-		printk(KERN_WARNING
-			"PNP: PS/2 controller has invalid data port %#x; "
-			"using default %#x\n",
+		pr_warn("PNP: PS/2 controller has invalid data port %#x; using default %#x\n",
 			i8042_pnp_data_reg, i8042_data_reg);
 		i8042_pnp_data_reg = i8042_data_reg;
 		pnp_data_busted = true;
@@ -809,33 +814,27 @@ static int __init i8042_pnp_init(void)
 	if (((i8042_pnp_command_reg & ~0xf) == (i8042_command_reg & ~0xf) &&
 	      i8042_pnp_command_reg != i8042_command_reg) ||
 	    !i8042_pnp_command_reg) {
-		printk(KERN_WARNING
-			"PNP: PS/2 controller has invalid command port %#x; "
-			"using default %#x\n",
+		pr_warn("PNP: PS/2 controller has invalid command port %#x; using default %#x\n",
 			i8042_pnp_command_reg, i8042_command_reg);
 		i8042_pnp_command_reg = i8042_command_reg;
 		pnp_data_busted = true;
 	}
 
 	if (!i8042_nokbd && !i8042_pnp_kbd_irq) {
-		printk(KERN_WARNING
-			"PNP: PS/2 controller doesn't have KBD irq; "
-			"using default %d\n", i8042_kbd_irq);
+		pr_warn("PNP: PS/2 controller doesn't have KBD irq; using default %d\n",
+			i8042_kbd_irq);
 		i8042_pnp_kbd_irq = i8042_kbd_irq;
 		pnp_data_busted = true;
 	}
 
 	if (!i8042_noaux && !i8042_pnp_aux_irq) {
 		if (!pnp_data_busted && i8042_pnp_kbd_irq) {
-			printk(KERN_WARNING
-				"PNP: PS/2 appears to have AUX port disabled, "
-				"if this is incorrect please boot with "
-				"i8042.nopnp\n");
+			pr_warn("PNP: PS/2 appears to have AUX port disabled, "
+				"if this is incorrect please boot with i8042.nopnp\n");
 			i8042_noaux = true;
 		} else {
-			printk(KERN_WARNING
-				"PNP: PS/2 controller doesn't have AUX irq; "
-				"using default %d\n", i8042_aux_irq);
+			pr_warn("PNP: PS/2 controller doesn't have AUX irq; using default %d\n",
+				i8042_aux_irq);
 			i8042_pnp_aux_irq = i8042_aux_irq;
 		}
 	}
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 18db5a8c747..c04ff00a366 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -10,6 +10,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/module.h>
@@ -225,8 +227,8 @@ static int i8042_flush(void)
 		udelay(50);
 		data = i8042_read_data();
 		i++;
-		dbg("%02x <- i8042 (flush, %s)", data,
-			str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		dbg("%02x <- i8042 (flush, %s)\n",
+		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 	}
 
 	spin_unlock_irqrestore(&i8042_lock, flags);
@@ -253,32 +255,32 @@ static int __i8042_command(unsigned char *param, int command)
 	if (error)
 		return error;
 
-	dbg("%02x -> i8042 (command)", command & 0xff);
+	dbg("%02x -> i8042 (command)\n", command & 0xff);
 	i8042_write_command(command & 0xff);
 
 	for (i = 0; i < ((command >> 12) & 0xf); i++) {
 		error = i8042_wait_write();
 		if (error)
 			return error;
-		dbg("%02x -> i8042 (parameter)", param[i]);
+		dbg("%02x -> i8042 (parameter)\n", param[i]);
 		i8042_write_data(param[i]);
 	}
 
 	for (i = 0; i < ((command >> 8) & 0xf); i++) {
 		error = i8042_wait_read();
 		if (error) {
-			dbg("     -- i8042 (timeout)");
+			dbg("     -- i8042 (timeout)\n");
 			return error;
 		}
 
 		if (command == I8042_CMD_AUX_LOOP &&
 		    !(i8042_read_status() & I8042_STR_AUXDATA)) {
-			dbg("     -- i8042 (auxerr)");
+			dbg("     -- i8042 (auxerr)\n");
 			return -1;
 		}
 
 		param[i] = i8042_read_data();
-		dbg("%02x <- i8042 (return)", param[i]);
+		dbg("%02x <- i8042 (return)\n", param[i]);
 	}
 
 	return 0;
@@ -309,7 +311,7 @@ static int i8042_kbd_write(struct serio *port, unsigned char c)
 	spin_lock_irqsave(&i8042_lock, flags);
 
 	if (!(retval = i8042_wait_write())) {
-		dbg("%02x -> i8042 (kbd-data)", c);
+		dbg("%02x -> i8042 (kbd-data)\n", c);
 		i8042_write_data(c);
 	}
 
@@ -355,17 +357,14 @@ static void i8042_port_close(struct serio *serio)
 
 	i8042_ctr &= ~irq_bit;
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING
-			"i8042.c: Can't write CTR while closing %s port.\n",
-			port_name);
+		pr_warn("Can't write CTR while closing %s port\n", port_name);
 
 	udelay(50);
 
 	i8042_ctr &= ~disable_bit;
 	i8042_ctr |= irq_bit;
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_ERR "i8042.c: Can't reactivate %s port.\n",
-			port_name);
+		pr_err("Can't reactivate %s port\n", port_name);
 
 	/*
 	 * See if there is any data appeared while we were messing with
@@ -456,7 +455,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (unlikely(~str & I8042_STR_OBF)) {
 		spin_unlock_irqrestore(&i8042_lock, flags);
-		if (irq) dbg("Interrupt %d, without any data", irq);
+		if (irq)
+			dbg("Interrupt %d, without any data\n", irq);
 		ret = 0;
 		goto out;
 	}
@@ -469,7 +469,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 
 		dfl = 0;
 		if (str & I8042_STR_MUXERR) {
-			dbg("MUX error, status is %02x, data is %02x", str, data);
+			dbg("MUX error, status is %02x, data is %02x\n",
+			    str, data);
 /*
  * When MUXERR condition is signalled the data register can only contain
  * 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately
@@ -512,7 +513,7 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	port = &i8042_ports[port_no];
 	serio = port->exists ? port->serio : NULL;
 
-	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
+	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)\n",
 	    data, port_no, irq,
 	    dfl & SERIO_PARITY ? ", bad parity" : "",
 	    dfl & SERIO_TIMEOUT ? ", timeout" : "");
@@ -540,7 +541,7 @@ static int i8042_enable_kbd_port(void)
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		i8042_ctr &= ~I8042_CTR_KBDINT;
 		i8042_ctr |= I8042_CTR_KBDDIS;
-		printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n");
+		pr_err("Failed to enable KBD port\n");
 		return -EIO;
 	}
 
@@ -559,7 +560,7 @@ static int i8042_enable_aux_port(void)
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		i8042_ctr &= ~I8042_CTR_AUXINT;
 		i8042_ctr |= I8042_CTR_AUXDIS;
-		printk(KERN_ERR "i8042.c: Failed to enable AUX port.\n");
+		pr_err("Failed to enable AUX port\n");
 		return -EIO;
 	}
 
@@ -641,7 +642,7 @@ static int __init i8042_check_mux(void)
 	if (i8042_set_mux_mode(true, &mux_version))
 		return -1;
 
-	printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
+	pr_info("Detected active multiplexing controller, rev %d.%d\n",
 		(mux_version >> 4) & 0xf, mux_version & 0xf);
 
 /*
@@ -651,7 +652,7 @@ static int __init i8042_check_mux(void)
 	i8042_ctr &= ~I8042_CTR_AUXINT;
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n");
+		pr_err("Failed to disable AUX port, can't use MUX\n");
 		return -EIO;
 	}
 
@@ -676,8 +677,8 @@ static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (str & I8042_STR_OBF) {
 		data = i8042_read_data();
-		dbg("%02x <- i8042 (aux_test_irq, %s)",
-			data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		dbg("%02x <- i8042 (aux_test_irq, %s)\n",
+		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 		if (i8042_irq_being_tested &&
 		    data == 0xa5 && (str & I8042_STR_AUXDATA))
 			complete(&i8042_aux_irq_delivered);
@@ -770,8 +771,8 @@ static int __init i8042_check_aux(void)
  */
 
 	if (i8042_toggle_aux(false)) {
-		printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
-		printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n");
+		pr_warn("Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
+		pr_warn("If AUX port is really absent please use the 'i8042.noaux' option\n");
 	}
 
 	if (i8042_toggle_aux(true))
@@ -819,7 +820,7 @@ static int __init i8042_check_aux(void)
  * AUX IRQ was never delivered so we need to flush the controller to
  * get rid of the byte we put there; otherwise keyboard may not work.
  */
-		dbg("     -- i8042 (aux irq test timeout)");
+		dbg("     -- i8042 (aux irq test timeout)\n");
 		i8042_flush();
 		retval = -1;
 	}
@@ -845,7 +846,7 @@ static int __init i8042_check_aux(void)
 static int i8042_controller_check(void)
 {
 	if (i8042_flush() == I8042_BUFFER_SIZE) {
-		printk(KERN_ERR "i8042.c: No controller found.\n");
+		pr_err("No controller found\n");
 		return -ENODEV;
 	}
 
@@ -864,15 +865,15 @@ static int i8042_controller_selftest(void)
 	do {
 
 		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
-			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+			pr_err("i8042 controller self test timeout\n");
 			return -ENODEV;
 		}
 
 		if (param == I8042_RET_CTL_TEST)
 			return 0;
 
-		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
-			param, I8042_RET_CTL_TEST);
+		pr_err("i8042 controller selftest failed. (%#x != %#x)\n",
+		       param, I8042_RET_CTL_TEST);
 		msleep(50);
 	} while (i++ < 5);
 
@@ -883,8 +884,7 @@ static int i8042_controller_selftest(void)
 	 * and user will still get a working keyboard. This is especially
 	 * important on netbooks. On other arches we trust hardware more.
 	 */
-	printk(KERN_INFO
-		"i8042: giving up on controller selftest, continuing anyway...\n");
+	pr_info("giving up on controller selftest, continuing anyway...\n");
 	return 0;
 #else
 	return -EIO;
@@ -909,8 +909,7 @@ static int i8042_controller_init(void)
 
 	do {
 		if (n >= 10) {
-			printk(KERN_ERR
-				"i8042.c: Unable to get stable CTR read.\n");
+			pr_err("Unable to get stable CTR read\n");
 			return -EIO;
 		}
 
@@ -918,8 +917,7 @@ static int i8042_controller_init(void)
 			udelay(50);
 
 		if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
-			printk(KERN_ERR
-				"i8042.c: Can't read CTR while initializing i8042.\n");
+			pr_err("Can't read CTR while initializing i8042\n");
 			return -EIO;
 		}
 
@@ -943,7 +941,7 @@ static int i8042_controller_init(void)
 		if (i8042_unlock)
 			i8042_ctr |= I8042_CTR_IGNKEYLOCK;
 		else
-			printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n");
+			pr_warn("Warning: Keylock active\n");
 	}
 	spin_unlock_irqrestore(&i8042_lock, flags);
 
@@ -970,7 +968,7 @@ static int i8042_controller_init(void)
  */
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
+		pr_err("Can't write CTR while initializing i8042\n");
 		return -EIO;
 	}
 
@@ -1000,7 +998,7 @@ static void i8042_controller_reset(void)
 	i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n");
+		pr_warn("Can't write CTR while resetting\n");
 
 /*
  * Disable MUX mode if present.
@@ -1021,7 +1019,7 @@ static void i8042_controller_reset(void)
  */
 
 	if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");
+		pr_warn("Can't restore CTR\n");
 }
 
 
@@ -1045,14 +1043,14 @@ static long i8042_panic_blink(int state)
 	led = (state) ? 0x01 | 0x04 : 0;
 	while (i8042_read_status() & I8042_STR_IBF)
 		DELAY;
-	dbg("%02x -> i8042 (panic blink)", 0xed);
+	dbg("%02x -> i8042 (panic blink)\n", 0xed);
 	i8042_suppress_kbd_ack = 2;
 	i8042_write_data(0xed); /* set leds */
 	DELAY;
 	while (i8042_read_status() & I8042_STR_IBF)
 		DELAY;
 	DELAY;
-	dbg("%02x -> i8042 (panic blink)", led);
+	dbg("%02x -> i8042 (panic blink)\n", led);
 	i8042_write_data(led);
 	DELAY;
 	return delay;
@@ -1068,9 +1066,7 @@ static void i8042_dritek_enable(void)
 
 	error = i8042_command(&param, 0x1059);
 	if (error)
-		printk(KERN_WARNING
-			"Failed to enable DRITEK extension: %d\n",
-			error);
+		pr_warn("Failed to enable DRITEK extension: %d\n", error);
 }
 #endif
 
@@ -1105,10 +1101,10 @@ static int i8042_controller_resume(bool force_reset)
 	i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
 	i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+		pr_warn("Can't write CTR to resume, retrying...\n");
 		msleep(50);
 		if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-			printk(KERN_ERR "i8042: CTR write retry failed\n");
+			pr_err("CTR write retry failed\n");
 			return -EIO;
 		}
 	}
@@ -1121,9 +1117,7 @@ static int i8042_controller_resume(bool force_reset)
 
 	if (i8042_mux_present) {
 		if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports())
-			printk(KERN_WARNING
-				"i8042: failed to resume active multiplexor, "
-				"mouse won't work.\n");
+			pr_warn("failed to resume active multiplexor, mouse won't work\n");
 	} else if (i8042_ports[I8042_AUX_PORT_NO].serio)
 		i8042_enable_aux_port();
 
diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
index cbc1beb6657..ac1d759d0f5 100644
--- a/drivers/input/serio/i8042.h
+++ b/drivers/input/serio/i8042.h
@@ -89,15 +89,19 @@
 #ifdef DEBUG
 static unsigned long i8042_start_time;
 #define dbg_init() do { i8042_start_time = jiffies; } while (0)
-#define dbg(format, arg...) 							\
-	do { 									\
+#define dbg(format, arg...)							\
+	do {									\
 		if (i8042_debug)						\
-			printk(KERN_DEBUG __FILE__ ": " format " [%d]\n" ,	\
-	 			## arg, (int) (jiffies - i8042_start_time));	\
+			printk(KERN_DEBUG KBUILD_MODNAME ": [%d] " format,	\
+			       (int) (jiffies - i8042_start_time), ##arg);	\
 	} while (0)
 #else
 #define dbg_init() do { } while (0)
-#define dbg(format, arg...) do {} while (0)
+#define dbg(format, arg...)							\
+	do {									\
+		if (0)								\
+			printk(KERN_DEBUG pr_fmt(format), ##arg);		\
+	} while (0)
 #endif
 
 #endif /* _I8042_H */
diff --git a/drivers/input/serio/ps2mult.c b/drivers/input/serio/ps2mult.c
index 6bce22e4e49..15aa81c9f1f 100644
--- a/drivers/input/serio/ps2mult.c
+++ b/drivers/input/serio/ps2mult.c
@@ -207,7 +207,7 @@ static int ps2mult_connect(struct serio *serio, struct serio_driver *drv)
 err_out:
 	while (--i >= 0)
 		kfree(psm->ports[i].serio);
-	kfree(serio);
+	kfree(psm);
 	return error;
 }
 
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 405bf214527..db5b0bca1a1 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -32,10 +32,9 @@
 #include <linux/module.h>
 #include <linux/serio.h>
 #include <linux/errno.h>
-#include <linux/wait.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/kthread.h>
+#include <linux/workqueue.h>
 #include <linux/mutex.h>
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
@@ -44,7 +43,7 @@ MODULE_LICENSE("GPL");
 
 /*
  * serio_mutex protects entire serio subsystem and is taken every time
- * serio port or driver registrered or unregistered.
+ * serio port or driver registered or unregistered.
  */
 static DEFINE_MUTEX(serio_mutex);
 
@@ -165,58 +164,22 @@ struct serio_event {
 
 static DEFINE_SPINLOCK(serio_event_lock);	/* protects serio_event_list */
 static LIST_HEAD(serio_event_list);
-static DECLARE_WAIT_QUEUE_HEAD(serio_wait);
-static struct task_struct *serio_task;
 
-static int serio_queue_event(void *object, struct module *owner,
-			     enum serio_event_type event_type)
+static struct serio_event *serio_get_event(void)
 {
+	struct serio_event *event = NULL;
 	unsigned long flags;
-	struct serio_event *event;
-	int retval = 0;
 
 	spin_lock_irqsave(&serio_event_lock, flags);
 
-	/*
-	 * Scan event list for the other events for the same serio port,
-	 * starting with the most recent one. If event is the same we
-	 * do not need add new one. If event is of different type we
-	 * need to add this event and should not look further because
-	 * we need to preseve sequence of distinct events.
-	 */
-	list_for_each_entry_reverse(event, &serio_event_list, node) {
-		if (event->object == object) {
-			if (event->type == event_type)
-				goto out;
-			break;
-		}
-	}
-
-	event = kmalloc(sizeof(struct serio_event), GFP_ATOMIC);
-	if (!event) {
-		pr_err("Not enough memory to queue event %d\n", event_type);
-		retval = -ENOMEM;
-		goto out;
-	}
-
-	if (!try_module_get(owner)) {
-		pr_warning("Can't get module reference, dropping event %d\n",
-			   event_type);
-		kfree(event);
-		retval = -EINVAL;
-		goto out;
+	if (!list_empty(&serio_event_list)) {
+		event = list_first_entry(&serio_event_list,
+					 struct serio_event, node);
+		list_del_init(&event->node);
 	}
 
-	event->type = event_type;
-	event->object = object;
-	event->owner = owner;
-
-	list_add_tail(&event->node, &serio_event_list);
-	wake_up(&serio_wait);
-
-out:
 	spin_unlock_irqrestore(&serio_event_lock, flags);
-	return retval;
+	return event;
 }
 
 static void serio_free_event(struct serio_event *event)
@@ -250,25 +213,7 @@ static void serio_remove_duplicate_events(struct serio_event *event)
 	spin_unlock_irqrestore(&serio_event_lock, flags);
 }
 
-
-static struct serio_event *serio_get_event(void)
-{
-	struct serio_event *event = NULL;
-	unsigned long flags;
-
-	spin_lock_irqsave(&serio_event_lock, flags);
-
-	if (!list_empty(&serio_event_list)) {
-		event = list_first_entry(&serio_event_list,
-					 struct serio_event, node);
-		list_del_init(&event->node);
-	}
-
-	spin_unlock_irqrestore(&serio_event_lock, flags);
-	return event;
-}
-
-static void serio_handle_event(void)
+static void serio_handle_event(struct work_struct *work)
 {
 	struct serio_event *event;
 
@@ -307,6 +252,59 @@ static void serio_handle_event(void)
 	mutex_unlock(&serio_mutex);
 }
 
+static DECLARE_WORK(serio_event_work, serio_handle_event);
+
+static int serio_queue_event(void *object, struct module *owner,
+			     enum serio_event_type event_type)
+{
+	unsigned long flags;
+	struct serio_event *event;
+	int retval = 0;
+
+	spin_lock_irqsave(&serio_event_lock, flags);
+
+	/*
+	 * Scan event list for the other events for the same serio port,
+	 * starting with the most recent one. If event is the same we
+	 * do not need add new one. If event is of different type we
+	 * need to add this event and should not look further because
+	 * we need to preseve sequence of distinct events.
+	 */
+	list_for_each_entry_reverse(event, &serio_event_list, node) {
+		if (event->object == object) {
+			if (event->type == event_type)
+				goto out;
+			break;
+		}
+	}
+
+	event = kmalloc(sizeof(struct serio_event), GFP_ATOMIC);
+	if (!event) {
+		pr_err("Not enough memory to queue event %d\n", event_type);
+		retval = -ENOMEM;
+		goto out;
+	}
+
+	if (!try_module_get(owner)) {
+		pr_warning("Can't get module reference, dropping event %d\n",
+			   event_type);
+		kfree(event);
+		retval = -EINVAL;
+		goto out;
+	}
+
+	event->type = event_type;
+	event->object = object;
+	event->owner = owner;
+
+	list_add_tail(&event->node, &serio_event_list);
+	schedule_work(&serio_event_work);
+
+out:
+	spin_unlock_irqrestore(&serio_event_lock, flags);
+	return retval;
+}
+
 /*
  * Remove all events that have been submitted for a given
  * object, be it serio port or driver.
@@ -356,18 +354,6 @@ static struct serio *serio_get_pending_child(struct serio *parent)
 	return child;
 }
 
-static int serio_thread(void *nothing)
-{
-	do {
-		serio_handle_event();
-		wait_event_interruptible(serio_wait,
-			kthread_should_stop() || !list_empty(&serio_event_list));
-	} while (!kthread_should_stop());
-
-	return 0;
-}
-
-
 /*
  * Serio port operations
  */
@@ -1040,21 +1026,18 @@ static int __init serio_init(void)
 		return error;
 	}
 
-	serio_task = kthread_run(serio_thread, NULL, "kseriod");
-	if (IS_ERR(serio_task)) {
-		bus_unregister(&serio_bus);
-		error = PTR_ERR(serio_task);
-		pr_err("Failed to start kseriod, error: %d\n", error);
-		return error;
-	}
-
 	return 0;
 }
 
 static void __exit serio_exit(void)
 {
 	bus_unregister(&serio_bus);
-	kthread_stop(serio_task);
+
+	/*
+	 * There should not be any outstanding events but work may
+	 * still be scheduled so simply cancel it.
+	 */
+	cancel_work_sync(&serio_event_work);
 }
 
 subsys_initcall(serio_init);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index f72df2c4a64..518782999fe 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -14,6 +14,7 @@
 
 #include "wacom_wac.h"
 #include "wacom.h"
+#include <linux/input/mt.h>
 
 static int wacom_penpartner_irq(struct wacom_wac *wacom)
 {
@@ -862,19 +863,21 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
 	struct wacom_features *features = &wacom->features;
 	struct input_dev *input = wacom->input;
 	unsigned char *data = wacom->data;
-	int sp = 0, sx = 0, sy = 0, count = 0;
 	int i;
 
 	for (i = 0; i < 2; i++) {
 		int p = data[9 * i + 2];
+		bool touch = p && !wacom->shared->stylus_in_proximity;
+
 		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
 		/*
 		 * Touch events need to be disabled while stylus is
 		 * in proximity because user's hand is resting on touchpad
 		 * and sending unwanted events.  User expects tablet buttons
 		 * to continue working though.
 		 */
-		if (p && !wacom->shared->stylus_in_proximity) {
+		if (touch) {
 			int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff;
 			int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff;
 			if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) {
@@ -884,23 +887,10 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
 			input_report_abs(input, ABS_MT_PRESSURE, p);
 			input_report_abs(input, ABS_MT_POSITION_X, x);
 			input_report_abs(input, ABS_MT_POSITION_Y, y);
-			if (wacom->id[i] < 0)
-				wacom->id[i] = wacom->trk_id++ & MAX_TRACKING_ID;
-			if (!count++)
-				sp = p, sx = x, sy = y;
-		} else {
-			wacom->id[i] = -1;
 		}
-		input_report_abs(input, ABS_MT_TRACKING_ID, wacom->id[i]);
 	}
 
-	input_report_key(input, BTN_TOUCH, count > 0);
-	input_report_key(input, BTN_TOOL_FINGER, count == 1);
-	input_report_key(input, BTN_TOOL_DOUBLETAP, count == 2);
-
-	input_report_abs(input, ABS_PRESSURE, sp);
-	input_report_abs(input, ABS_X, sx);
-	input_report_abs(input, ABS_Y, sy);
+	input_mt_report_pointer_emulation(input, true);
 
 	input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
 	input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
@@ -1272,7 +1262,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 			__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
 			__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
 
-			input_mt_create_slots(input_dev, 2);
+			input_mt_init_slots(input_dev, 2);
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
 					     0, features->x_max,
 					     features->x_fuzz, 0);
@@ -1282,8 +1272,6 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 			input_set_abs_params(input_dev, ABS_MT_PRESSURE,
 					     0, features->pressure_max,
 					     features->pressure_fuzz, 0);
-			input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0,
-					     MAX_TRACKING_ID, 0, 0);
 		} else if (features->device_type == BTN_TOOL_PEN) {
 			__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
 			__set_bit(BTN_TOOL_PEN, input_dev->keybit);
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 00ca01541d8..b1310ec9720 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -42,9 +42,6 @@
 #define WACOM_QUIRK_MULTI_INPUT		0x0001
 #define WACOM_QUIRK_BBTOUCH_LOWRES	0x0002
 
-/* largest reported tracking id */
-#define MAX_TRACKING_ID			0xfff
-
 enum {
 	PENPARTNER = 0,
 	GRAPHIRE,
@@ -100,7 +97,6 @@ struct wacom_wac {
 	int id[3];
 	__u32 serial[2];
 	int last_finger;
-	int trk_id;
 	struct wacom_features features;
 	struct wacom_shared *shared;
 	struct input_dev *input;
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 06ea8da95c6..07ac77d393a 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -659,17 +659,17 @@ config TOUCHSCREEN_PCAP
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcap_ts.
 
-config TOUCHSCREEN_TPS6507X
-	tristate "TPS6507x based touchscreens"
+config TOUCHSCREEN_ST1232
+	tristate "Sitronix ST1232 touchscreen controllers"
 	depends on I2C
 	help
-	  Say Y here if you have a TPS6507x based touchscreen
-	  controller.
+	  Say Y here if you want to support Sitronix ST1232
+	  touchscreen controller.
 
 	  If unsure, say N.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called tps6507x_ts.
+	  module will be called st1232_ts.
 
 config TOUCHSCREEN_STMPE
 	tristate "STMicroelectronics STMPE touchscreens"
@@ -681,4 +681,16 @@ config TOUCHSCREEN_STMPE
 	  To compile this driver as a module, choose M here: the
 	  module will be called stmpe-ts.
 
+config TOUCHSCREEN_TPS6507X
+	tristate "TPS6507x based touchscreens"
+	depends on I2C
+	help
+	  Say Y here if you have a TPS6507x based touchscreen
+	  controller.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tps6507x_ts.
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 7cc1b4f4b67..718bcc81495 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
 obj-$(CONFIG_TOUCHSCREEN_QT602240)	+= qt602240_ts.o
 obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
+obj-$(CONFIG_TOUCHSCREEN_ST1232)	+= st1232.o
 obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o
 obj-$(CONFIG_TOUCHSCREEN_TNETV107X)	+= tnetv107x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index 2ca9e5d6646..f7fa9ef4cd6 100644
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -365,7 +365,7 @@ static int bu21013_init_chip(struct bu21013_ts_data *data)
 	}
 
 	retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_OFF_REG,
-				BU21013_TH_OFF_4 || BU21013_TH_OFF_3);
+				BU21013_TH_OFF_4 | BU21013_TH_OFF_3);
 	if (retval < 0) {
 		dev_err(&i2c->dev, "BU21013_TH_OFF reg write failed\n");
 		return retval;
diff --git a/drivers/input/touchscreen/qt602240_ts.c b/drivers/input/touchscreen/qt602240_ts.c
index 66b26ad3032..4dcb0e872f6 100644
--- a/drivers/input/touchscreen/qt602240_ts.c
+++ b/drivers/input/touchscreen/qt602240_ts.c
@@ -969,7 +969,7 @@ static int qt602240_initialize(struct qt602240_data *data)
 		return error;
 
 	data->object_table = kcalloc(info->object_num,
-				     sizeof(struct qt602240_data),
+				     sizeof(struct qt602240_object),
 				     GFP_KERNEL);
 	if (!data->object_table) {
 		dev_err(&client->dev, "Failed to allocate memory\n");
@@ -1324,8 +1324,9 @@ static int __devexit qt602240_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int qt602240_suspend(struct i2c_client *client, pm_message_t mesg)
+static int qt602240_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct qt602240_data *data = i2c_get_clientdata(client);
 	struct input_dev *input_dev = data->input_dev;
 
@@ -1339,8 +1340,9 @@ static int qt602240_suspend(struct i2c_client *client, pm_message_t mesg)
 	return 0;
 }
 
-static int qt602240_resume(struct i2c_client *client)
+static int qt602240_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct qt602240_data *data = i2c_get_clientdata(client);
 	struct input_dev *input_dev = data->input_dev;
 
@@ -1359,9 +1361,11 @@ static int qt602240_resume(struct i2c_client *client)
 
 	return 0;
 }
-#else
-#define qt602240_suspend	NULL
-#define qt602240_resume		NULL
+
+static const struct dev_pm_ops qt602240_pm_ops = {
+	.suspend	= qt602240_suspend,
+	.resume		= qt602240_resume,
+};
 #endif
 
 static const struct i2c_device_id qt602240_id[] = {
@@ -1374,11 +1378,12 @@ static struct i2c_driver qt602240_driver = {
 	.driver = {
 		.name	= "qt602240_ts",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &qt602240_pm_ops,
+#endif
 	},
 	.probe		= qt602240_probe,
 	.remove		= __devexit_p(qt602240_remove),
-	.suspend	= qt602240_suspend,
-	.resume		= qt602240_resume,
 	.id_table	= qt602240_id,
 };
 
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
new file mode 100644
index 00000000000..4ab371358b3
--- /dev/null
+++ b/drivers/input/touchscreen/st1232.c
@@ -0,0 +1,274 @@
+/*
+ * ST1232 Touchscreen Controller Driver
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ *	Tony SIM <chinyeow.sim.xt@renesas.com>
+ *
+ * Using code from:
+ *  - android.git.kernel.org: projects/kernel/common.git: synaptics_i2c_rmi.c
+ *	Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define ST1232_TS_NAME	"st1232-ts"
+
+#define MIN_X		0x00
+#define MIN_Y		0x00
+#define MAX_X		0x31f	/* (800 - 1) */
+#define MAX_Y		0x1df	/* (480 - 1) */
+#define MAX_AREA	0xff
+#define MAX_FINGERS	2
+
+struct st1232_ts_finger {
+	u16 x;
+	u16 y;
+	u8 t;
+	bool is_valid;
+};
+
+struct st1232_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct st1232_ts_finger finger[MAX_FINGERS];
+};
+
+static int st1232_ts_read_data(struct st1232_ts_data *ts)
+{
+	struct st1232_ts_finger *finger = ts->finger;
+	struct i2c_client *client = ts->client;
+	struct i2c_msg msg[2];
+	int error;
+	u8 start_reg;
+	u8 buf[10];
+
+	/* read touchscreen data from ST1232 */
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = &start_reg;
+	start_reg = 0x10;
+
+	msg[1].addr = ts->client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = sizeof(buf);
+	msg[1].buf = buf;
+
+	error = i2c_transfer(client->adapter, msg, 2);
+	if (error < 0)
+		return error;
+
+	/* get "valid" bits */
+	finger[0].is_valid = buf[2] >> 7;
+	finger[1].is_valid = buf[5] >> 7;
+
+	/* get xy coordinate */
+	if (finger[0].is_valid) {
+		finger[0].x = ((buf[2] & 0x0070) << 4) | buf[3];
+		finger[0].y = ((buf[2] & 0x0007) << 8) | buf[4];
+		finger[0].t = buf[8];
+	}
+
+	if (finger[1].is_valid) {
+		finger[1].x = ((buf[5] & 0x0070) << 4) | buf[6];
+		finger[1].y = ((buf[5] & 0x0007) << 8) | buf[7];
+		finger[1].t = buf[9];
+	}
+
+	return 0;
+}
+
+static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
+{
+	struct st1232_ts_data *ts = dev_id;
+	struct st1232_ts_finger *finger = ts->finger;
+	struct input_dev *input_dev = ts->input_dev;
+	int count = 0;
+	int i, ret;
+
+	ret = st1232_ts_read_data(ts);
+	if (ret < 0)
+		goto end;
+
+	/* multi touch protocol */
+	for (i = 0; i < MAX_FINGERS; i++) {
+		if (!finger[i].is_valid)
+			continue;
+
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, finger[i].t);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y);
+		input_mt_sync(input_dev);
+		count++;
+	}
+
+	/* SYN_MT_REPORT only if no contact */
+	if (!count)
+		input_mt_sync(input_dev);
+
+	/* SYN_REPORT */
+	input_sync(input_dev);
+
+end:
+	return IRQ_HANDLED;
+}
+
+static int __devinit st1232_ts_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct st1232_ts_data *ts;
+	struct input_dev *input_dev;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "need I2C_FUNC_I2C\n");
+		return -EIO;
+	}
+
+	if (!client->irq) {
+		dev_err(&client->dev, "no IRQ?\n");
+		return -EINVAL;
+	}
+
+
+	ts = kzalloc(sizeof(struct st1232_ts_data), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ts->client = client;
+	ts->input_dev = input_dev;
+
+	input_dev->name = "st1232-touchscreen";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	__set_bit(EV_SYN, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(EV_ABS, input_dev->evbit);
+
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0);
+
+	error = request_threaded_irq(client->irq, NULL, st1232_ts_irq_handler,
+				     IRQF_ONESHOT, client->name, ts);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(ts->input_dev);
+	if (error) {
+		dev_err(&client->dev, "Unable to register %s input device\n",
+			input_dev->name);
+		goto err_free_irq;
+	}
+
+	i2c_set_clientdata(client, ts);
+	device_init_wakeup(&client->dev, 1);
+
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, ts);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts);
+	return error;
+}
+
+static int __devexit st1232_ts_remove(struct i2c_client *client)
+{
+	struct st1232_ts_data *ts = i2c_get_clientdata(client);
+
+	device_init_wakeup(&client->dev, 0);
+	free_irq(client->irq, ts);
+	input_unregister_device(ts->input_dev);
+	kfree(ts);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int st1232_ts_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+	else
+		disable_irq(client->irq);
+
+	return 0;
+}
+
+static int st1232_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+	else
+		enable_irq(client->irq);
+
+	return 0;
+}
+
+static const struct dev_pm_ops st1232_ts_pm_ops = {
+	.suspend	= st1232_ts_suspend,
+	.resume		= st1232_ts_resume,
+};
+#endif
+
+static const struct i2c_device_id st1232_ts_id[] = {
+	{ ST1232_TS_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, st1232_ts_id);
+
+static struct i2c_driver st1232_ts_driver = {
+	.probe		= st1232_ts_probe,
+	.remove		= __devexit_p(st1232_ts_remove),
+	.id_table	= st1232_ts_id,
+	.driver = {
+		.name	= ST1232_TS_NAME,
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &st1232_ts_pm_ops,
+#endif
+	},
+};
+
+static int __init st1232_ts_init(void)
+{
+	return i2c_add_driver(&st1232_ts_driver);
+}
+module_init(st1232_ts_init);
+
+static void __exit st1232_ts_exit(void)
+{
+	i2c_del_driver(&st1232_ts_driver);
+}
+module_exit(st1232_ts_exit);
+
+MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@renesas.com>");
+MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 9ae4c7b16ba..8ed53aded2d 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -15,10 +15,11 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/serio.h>
 #include <linux/init.h>
 #include <linux/ctype.h>
+#include <linux/delay.h>
 
 #define DRIVER_DESC	"Wacom W8001 serial touchscreen driver"
 
@@ -37,6 +38,7 @@ MODULE_LICENSE("GPL");
 
 #define W8001_QUERY_PACKET	0x20
 
+#define W8001_CMD_STOP		'0'
 #define W8001_CMD_START		'1'
 #define W8001_CMD_QUERY		'*'
 #define W8001_CMD_TOUCHQUERY	'%'
@@ -48,8 +50,6 @@ MODULE_LICENSE("GPL");
 #define W8001_PKTLEN_TPCCTL	11	/* control packet */
 #define W8001_PKTLEN_TOUCH2FG	13
 
-#define MAX_TRACKING_ID		0xFF	/* arbitrarily chosen */
-
 struct w8001_coord {
 	u8 rdy;
 	u8 tsw;
@@ -87,7 +87,6 @@ struct w8001 {
 	char phys[32];
 	int type;
 	unsigned int pktlen;
-	int trkid[2];
 };
 
 static void parse_data(u8 *data, struct w8001_coord *coord)
@@ -116,28 +115,23 @@ static void parse_data(u8 *data, struct w8001_coord *coord)
 
 static void parse_touch(struct w8001 *w8001)
 {
-	static int trkid;
 	struct input_dev *dev = w8001->dev;
 	unsigned char *data = w8001->data;
 	int i;
 
 	for (i = 0; i < 2; i++) {
-		input_mt_slot(dev, i);
+		bool touch = data[0] & (1 << i);
 
-		if (data[0] & (1 << i)) {
+		input_mt_slot(dev, i);
+		input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch);
+		if (touch) {
 			int x = (data[6 * i + 1] << 7) | (data[6 * i + 2]);
 			int y = (data[6 * i + 3] << 7) | (data[6 * i + 4]);
 			/* data[5,6] and [11,12] is finger capacity */
 
 			input_report_abs(dev, ABS_MT_POSITION_X, x);
 			input_report_abs(dev, ABS_MT_POSITION_Y, y);
-			input_report_abs(dev, ABS_MT_TOOL_TYPE, MT_TOOL_FINGER);
-			if (w8001->trkid[i] < 0)
-				w8001->trkid[i] = trkid++ & MAX_TRACKING_ID;
-		} else {
-			w8001->trkid[i] = -1;
 		}
-		input_report_abs(dev, ABS_MT_TRACKING_ID, w8001->trkid[i]);
 	}
 
 	input_sync(dev);
@@ -287,24 +281,46 @@ static int w8001_setup(struct w8001 *w8001)
 	struct w8001_coord coord;
 	int error;
 
-	error = w8001_command(w8001, W8001_CMD_QUERY, true);
+	error = w8001_command(w8001, W8001_CMD_STOP, false);
 	if (error)
 		return error;
 
-	parse_data(w8001->response, &coord);
+	msleep(250);	/* wait 250ms before querying the device */
 
-	input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
-	input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
-	input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
-	input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
-	input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
+	/* penabled? */
+	error = w8001_command(w8001, W8001_CMD_QUERY, true);
+	if (!error) {
+		__set_bit(BTN_TOOL_PEN, dev->keybit);
+		__set_bit(BTN_TOOL_RUBBER, dev->keybit);
+		__set_bit(BTN_STYLUS, dev->keybit);
+		__set_bit(BTN_STYLUS2, dev->keybit);
+		parse_data(w8001->response, &coord);
+
+		input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
+		input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+		input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
+		if (coord.tilt_x && coord.tilt_y) {
+			input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
+			input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
+		}
+	}
 
+	/* Touch enabled? */
 	error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true);
-	if (!error) {
+
+	/*
+	 * Some non-touch devices may reply to the touch query. But their
+	 * second byte is empty, which indicates touch is not supported.
+	 */
+	if (!error && w8001->response[1]) {
 		struct w8001_touch_query touch;
 
 		parse_touchquery(w8001->response, &touch);
 
+		input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
+		input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
+		__set_bit(BTN_TOOL_FINGER, dev->keybit);
+
 		switch (touch.sensor_id) {
 		case 0:
 		case 2:
@@ -318,15 +334,13 @@ static int w8001_setup(struct w8001 *w8001)
 		case 5:
 			w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
 
-			input_mt_create_slots(dev, 2);
-			input_set_abs_params(dev, ABS_MT_TRACKING_ID,
-						0, MAX_TRACKING_ID, 0, 0);
+			input_mt_init_slots(dev, 2);
 			input_set_abs_params(dev, ABS_MT_POSITION_X,
 						0, touch.x, 0, 0);
 			input_set_abs_params(dev, ABS_MT_POSITION_Y,
 						0, touch.y, 0, 0);
 			input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
-						0, 0, 0, 0);
+						0, MT_TOOL_MAX, 0, 0);
 			break;
 		}
 	}
@@ -372,7 +386,6 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
 	w8001->serio = serio;
 	w8001->id = serio->id.id;
 	w8001->dev = input_dev;
-	w8001->trkid[0] = w8001->trkid[1] = -1;
 	init_completion(&w8001->cmd_done);
 	snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
 
@@ -385,11 +398,7 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
 	input_dev->dev.parent = &serio->dev;
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-	input_dev->keybit[BIT_WORD(BTN_TOOL_PEN)] |= BIT_MASK(BTN_TOOL_PEN);
-	input_dev->keybit[BIT_WORD(BTN_TOOL_RUBBER)] |= BIT_MASK(BTN_TOOL_RUBBER);
-	input_dev->keybit[BIT_WORD(BTN_STYLUS)] |= BIT_MASK(BTN_STYLUS);
-	input_dev->keybit[BIT_WORD(BTN_STYLUS2)] |= BIT_MASK(BTN_STYLUS2);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
 
 	serio_set_drvdata(serio, w8001);
 	err = serio_open(serio, drv);
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c
index e0c024db2ca..7f85a862ad1 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/xen-kbdfront.c
@@ -17,6 +17,8 @@
  * Switch to grant tables together with xen-fbfront.c.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/module.h>
@@ -84,9 +86,8 @@ static irqreturn_t input_handler(int rq, void *dev_id)
 				input_report_key(dev, event->key.keycode,
 						 event->key.pressed);
 			else
-				printk(KERN_WARNING
-				       "xenkbd: unhandled keycode 0x%x\n",
-				       event->key.keycode);
+				pr_warning("unhandled keycode 0x%x\n",
+					   event->key.keycode);
 			break;
 		case XENKBD_TYPE_POS:
 			input_report_abs(dev, ABS_X, event->pos.abs_x);
@@ -292,8 +293,7 @@ InitWait:
 			ret = xenbus_printf(XBT_NIL, info->xbdev->nodename,
 					    "request-abs-pointer", "1");
 			if (ret)
-				printk(KERN_WARNING
-				       "xenkbd: can't request abs-pointer");
+				pr_warning("can't request abs-pointer\n");
 		}
 		xenbus_switch_state(dev, XenbusStateConnected);
 		break;
diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c
index 067f9962f49..6a82388505f 100644
--- a/drivers/macintosh/mac_hid.c
+++ b/drivers/macintosh/mac_hid.c
@@ -23,6 +23,8 @@ static int mouse_button3_keycode = KEY_RIGHTALT;	/* right option key */
 
 static struct input_dev *mac_hid_emumouse_dev;
 
+static DEFINE_MUTEX(mac_hid_emumouse_mutex);
+
 static int mac_hid_create_emumouse(void)
 {
 	static struct lock_class_key mac_hid_emumouse_dev_event_class;
@@ -187,6 +189,10 @@ static int mac_hid_toggle_emumouse(ctl_table *table, int write,
 	int old_val = *valp;
 	int rc;
 
+	rc = mutex_lock_killable(&mac_hid_emumouse_mutex);
+	if (rc)
+		return rc;
+
 	rc = proc_dointvec(table, write, buffer, lenp, ppos);
 
 	if (rc == 0 && write && *valp != old_val) {
@@ -202,6 +208,8 @@ static int mac_hid_toggle_emumouse(ctl_table *table, int write,
 	if (rc)
 		*valp = old_val;
 
+	mutex_unlock(&mac_hid_emumouse_mutex);
+
 	return rc;
 }