treewide: Correct spelling of successfully in comments

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

9 files changed, 9 insertions, 9 deletions

diff --git a/drivers/media/video/cx18/cx18-mailbox.h b/drivers/media/video/cx18/cx18-mailbox.h
index 05fe6bdbe06..b63fdfaac49 100644
--- a/drivers/media/video/cx18/cx18-mailbox.h
+++ b/drivers/media/video/cx18/cx18-mailbox.h
@@ -69,7 +69,7 @@ struct cx18_mailbox {
     /* Each command can have up to 6 arguments */
     u32       args[MAX_MB_ARGUMENTS];
     /* The return code can be one of the codes in the file cx23418.h. If the
-       command is completed successfuly, the error will be ERR_SYS_SUCCESS.
+       command is completed successfully, the error will be ERR_SYS_SUCCESS.
        If it is pending, the code is ERR_SYS_PENDING. If it failed, the error
        code would indicate the task from which the error originated and will
        be one of the errors in cx23418.h. In that case, the following
diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/igb/e1000_mbx.c
index 74f2f11ac29..469d95eaa15 100644
--- a/drivers/net/igb/e1000_mbx.c
+++ b/drivers/net/igb/e1000_mbx.c
@@ -34,7 +34,7 @@
  *  @size: Length of buffer
  *  @mbx_id: id of mailbox to read
  *
- *  returns SUCCESS if it successfuly read message from buffer
+ *  returns SUCCESS if it successfully read message from buffer
  **/
 s32 igb_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
 {
diff --git a/drivers/net/igbvf/mbx.c b/drivers/net/igbvf/mbx.c
index 3d6f4cc3998..048aae248d0 100644
--- a/drivers/net/igbvf/mbx.c
+++ b/drivers/net/igbvf/mbx.c
@@ -288,7 +288,7 @@ out_no_write:
  *  @msg: The message buffer
  *  @size: Length of buffer
  *
- *  returns SUCCESS if it successfuly read message from buffer
+ *  returns SUCCESS if it successfully read message from buffer
  **/
 static s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
 {
diff --git a/drivers/net/ixgbe/ixgbe_mbx.c b/drivers/net/ixgbe/ixgbe_mbx.c
index 1ff0eefcfd0..3f725d48336 100644
--- a/drivers/net/ixgbe/ixgbe_mbx.c
+++ b/drivers/net/ixgbe/ixgbe_mbx.c
@@ -38,7 +38,7 @@
  *  @size: Length of buffer
  *  @mbx_id: id of mailbox to read
  *
- *  returns SUCCESS if it successfuly read message from buffer
+ *  returns SUCCESS if it successfully read message from buffer
  **/
 s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
 {
diff --git a/drivers/net/ixgbevf/mbx.c b/drivers/net/ixgbevf/mbx.c
index 7a883312577..930fa83f256 100644
--- a/drivers/net/ixgbevf/mbx.c
+++ b/drivers/net/ixgbevf/mbx.c
@@ -276,7 +276,7 @@ out_no_write:
  *  @msg: The message buffer
  *  @size: Length of buffer
  *
- *  returns 0 if it successfuly read message from buffer
+ *  returns 0 if it successfully read message from buffer
  **/
 static s32 ixgbevf_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size)
 {
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index d84c4224dd1..e8be47d6d7d 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -553,7 +553,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
 		/*
 		 * There is no BCM5481 specification available, so down
 		 * here is everything we know about "register 0x18". This
-		 * at least helps BCM5481 to successfuly receive packets
+		 * at least helps BCM5481 to successfully receive packets
 		 * on MPC8360E-RDK board. Peter Barada <peterb@logicpd.com>
 		 * says: "This sets delay between the RXD and RXC signals
 		 * instead of using trace lengths to achieve timing".
diff --git a/drivers/net/tile/tilepro.c b/drivers/net/tile/tilepro.c
index 1e2af96fc29..7b46e75deb5 100644
--- a/drivers/net/tile/tilepro.c
+++ b/drivers/net/tile/tilepro.c
@@ -177,7 +177,7 @@ struct tile_net_cpu {
 	struct tile_net_stats_t stats;
 	/* True iff NAPI is enabled. */
 	bool napi_enabled;
-	/* True if this tile has succcessfully registered with the IPP. */
+	/* True if this tile has successfully registered with the IPP. */
 	bool registered;
 	/* True if the link was down last time we tried to register. */
 	bool link_down;
diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c
index 4d087ac1106..426cd4bf6a9 100644
--- a/drivers/target/iscsi/iscsi_target_nego.c
+++ b/drivers/target/iscsi/iscsi_target_nego.c
@@ -504,7 +504,7 @@ static int iscsi_target_do_authentication(
 		break;
 	case 1:
 		pr_debug("iSCSI security negotiation"
-			" completed sucessfully.\n");
+			" completed successfully.\n");
 		login->auth_complete = 1;
 		if ((login_req->flags & ISCSI_FLAG_LOGIN_NEXT_STAGE1) &&
 		    (login_req->flags & ISCSI_FLAG_LOGIN_TRANSIT)) {
diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index 162b736c734..49fd0a9b0a5 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -593,7 +593,7 @@ int core_tpg_set_initiator_node_queue_depth(
 	if (init_sess)
 		tpg->se_tpg_tfo->close_session(init_sess);
 
-	pr_debug("Successfuly changed queue depth to: %d for Initiator"
+	pr_debug("Successfully changed queue depth to: %d for Initiator"
 		" Node: %s on %s Target Portal Group: %u\n", queue_depth,
 		initiatorname, tpg->se_tpg_tfo->get_fabric_name(),
 		tpg->se_tpg_tfo->tpg_get_tag(tpg));