[SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type

These enums have been separate since the dawn of SAS, mainly because the
latter is a procotol only enum and the former includes additional state
for libsas.  The dichotomy causes endless confusion about which one you
should use where and leads to pointless warnings like this:

drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo':
drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare]

Fix by eliminating one of them.  The one kept is effectively the sas.h
one, but call it sas_device_type and make sure the enums are all
properly namespaced with the SAS_ prefix.

Signed-off-by: James Bottomley <JBottomley@Parallels.com>

20 files changed, 144 insertions, 144 deletions

diff --git a/drivers/scsi/aic94xx/aic94xx_dev.c b/drivers/scsi/aic94xx/aic94xx_dev.c
index 64136c56e70..33072388ea1 100644
--- a/drivers/scsi/aic94xx/aic94xx_dev.c
+++ b/drivers/scsi/aic94xx/aic94xx_dev.c
@@ -84,7 +84,7 @@ static void asd_set_ddb_type(struct domain_device *dev)
 	struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
 	int ddb = (int) (unsigned long) dev->lldd_dev;
 
-	if (dev->dev_type == SATA_PM_PORT)
+	if (dev->dev_type == SAS_SATA_PM_PORT)
 		asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_PM_PORT);
 	else if (dev->tproto)
 		asd_ddbsite_write_byte(asd_ha,ddb, DDB_TYPE, DDB_TYPE_TARGET);
@@ -116,7 +116,7 @@ void asd_set_dmamode(struct domain_device *dev)
 	int ddb = (int) (unsigned long) dev->lldd_dev;
 	u32 qdepth = 0;
 
-	if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT) {
+	if (dev->dev_type == SAS_SATA_DEV || dev->dev_type == SAS_SATA_PM_PORT) {
 		if (ata_id_has_ncq(ata_dev->id))
 			qdepth = ata_id_queue_depth(ata_dev->id);
 		asd_ddbsite_write_dword(asd_ha, ddb, SATA_TAG_ALLOC_MASK,
@@ -140,8 +140,8 @@ static int asd_init_sata(struct domain_device *dev)
 	int ddb = (int) (unsigned long) dev->lldd_dev;
 
 	asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF);
-	if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM ||
-	    dev->dev_type == SATA_PM_PORT) {
+	if (dev->dev_type == SAS_SATA_DEV || dev->dev_type == SAS_SATA_PM ||
+	    dev->dev_type == SAS_SATA_PM_PORT) {
 		struct dev_to_host_fis *fis = (struct dev_to_host_fis *)
 			dev->frame_rcvd;
 		asd_ddbsite_write_byte(asd_ha, ddb, SATA_STATUS, fis->status);
@@ -174,7 +174,7 @@ static int asd_init_target_ddb(struct domain_device *dev)
 	asd_ddbsite_write_byte(asd_ha, ddb, CONN_MASK, dev->port->phy_mask);
 	if (dev->port->oob_mode != SATA_OOB_MODE) {
 		flags |= OPEN_REQUIRED;
-		if ((dev->dev_type == SATA_DEV) ||
+		if ((dev->dev_type == SAS_SATA_DEV) ||
 		    (dev->tproto & SAS_PROTOCOL_STP)) {
 			struct smp_resp *rps_resp = &dev->sata_dev.rps_resp;
 			if (rps_resp->frame_type == SMP_RESPONSE &&
@@ -188,8 +188,8 @@ static int asd_init_target_ddb(struct domain_device *dev)
 		} else {
 			flags |= CONCURRENT_CONN_SUPP;
 			if (!dev->parent &&
-			    (dev->dev_type == EDGE_DEV ||
-			     dev->dev_type == FANOUT_DEV))
+			    (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+			     dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE))
 				asd_ddbsite_write_byte(asd_ha, ddb, MAX_CCONN,
 						       4);
 			else
@@ -198,7 +198,7 @@ static int asd_init_target_ddb(struct domain_device *dev)
 			asd_ddbsite_write_byte(asd_ha, ddb, NUM_CTX, 1);
 		}
 	}
-	if (dev->dev_type == SATA_PM)
+	if (dev->dev_type == SAS_SATA_PM)
 		flags |= SATA_MULTIPORT;
 	asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS, flags);
 
@@ -211,7 +211,7 @@ static int asd_init_target_ddb(struct domain_device *dev)
 	asd_ddbsite_write_word(asd_ha, ddb, SEND_QUEUE_TAIL, 0xFFFF);
 	asd_ddbsite_write_word(asd_ha, ddb, SISTER_DDB, 0xFFFF);
 
-	if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
+	if (dev->dev_type == SAS_SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
 		i = asd_init_sata(dev);
 		if (i < 0) {
 			asd_free_ddb(asd_ha, ddb);
@@ -219,7 +219,7 @@ static int asd_init_target_ddb(struct domain_device *dev)
 		}
 	}
 
-	if (dev->dev_type == SAS_END_DEV) {
+	if (dev->dev_type == SAS_END_DEVICE) {
 		struct sas_end_device *rdev = rphy_to_end_device(dev->rphy);
 		if (rdev->I_T_nexus_loss_timeout > 0)
 			asd_ddbsite_write_word(asd_ha, ddb, ITNL_TIMEOUT,
@@ -328,10 +328,10 @@ int asd_dev_found(struct domain_device *dev)
 
 	spin_lock_irqsave(&asd_ha->hw_prof.ddb_lock, flags);
 	switch (dev->dev_type) {
-	case SATA_PM:
+	case SAS_SATA_PM:
 		res = asd_init_sata_pm_ddb(dev);
 		break;
-	case SATA_PM_PORT:
+	case SAS_SATA_PM_PORT:
 		res = asd_init_sata_pm_port_ddb(dev);
 		break;
 	default:
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.c b/drivers/scsi/aic94xx/aic94xx_hwi.c
index 81b736c76ff..4df867e07b2 100644
--- a/drivers/scsi/aic94xx/aic94xx_hwi.c
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.c
@@ -74,7 +74,7 @@ static void asd_init_phy_identify(struct asd_phy *phy)
 
 	memset(phy->identify_frame, 0, sizeof(*phy->identify_frame));
 
-	phy->identify_frame->dev_type = SAS_END_DEV;
+	phy->identify_frame->dev_type = SAS_END_DEVICE;
 	if (phy->sas_phy.role & PHY_ROLE_INITIATOR)
 		phy->identify_frame->initiator_bits = phy->sas_phy.iproto;
 	if (phy->sas_phy.role & PHY_ROLE_TARGET)
diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c
index cf9040933da..d4c35df3d4a 100644
--- a/drivers/scsi/aic94xx/aic94xx_tmf.c
+++ b/drivers/scsi/aic94xx/aic94xx_tmf.c
@@ -184,7 +184,7 @@ int asd_I_T_nexus_reset(struct domain_device *dev)
 	struct sas_phy *phy = sas_get_local_phy(dev);
 	/* Standard mandates link reset for ATA  (type 0) and
 	 * hard reset for SSP (type 1) */
-	int reset_type = (dev->dev_type == SATA_DEV ||
+	int reset_type = (dev->dev_type == SAS_SATA_DEV ||
 			  (dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
 
 	asd_clear_nexus_I_T(dev, NEXUS_PHASE_PRE);
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index c3aa6c5457b..96a26f45467 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -1085,7 +1085,7 @@ static void sci_remote_device_ready_state_enter(struct sci_base_state_machine *s
 	struct isci_host *ihost = idev->owning_port->owning_controller;
 	struct domain_device *dev = idev->domain_dev;
 
-	if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) {
+	if (dev->dev_type == SAS_SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) {
 		sci_change_state(&idev->sm, SCI_STP_DEV_IDLE);
 	} else if (dev_is_expander(dev)) {
 		sci_change_state(&idev->sm, SCI_SMP_DEV_IDLE);
@@ -1098,7 +1098,7 @@ static void sci_remote_device_ready_state_exit(struct sci_base_state_machine *sm
 	struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
 	struct domain_device *dev = idev->domain_dev;
 
-	if (dev->dev_type == SAS_END_DEV) {
+	if (dev->dev_type == SAS_END_DEVICE) {
 		struct isci_host *ihost = idev->owning_port->owning_controller;
 
 		isci_remote_device_not_ready(ihost, idev,
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
index 7674caae1d8..47a013fffae 100644
--- a/drivers/scsi/isci/remote_device.h
+++ b/drivers/scsi/isci/remote_device.h
@@ -297,7 +297,7 @@ static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_conte
 
 static inline bool dev_is_expander(struct domain_device *dev)
 {
-	return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV;
+	return dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE;
 }
 
 static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev)
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index 9594ab62702..e3e3bcbd5a9 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -2978,7 +2978,7 @@ static void sci_request_started_state_enter(struct sci_base_state_machine *sm)
 	/* all unaccelerated request types (non ssp or ncq) handled with
 	 * substates
 	 */
-	if (!task && dev->dev_type == SAS_END_DEV) {
+	if (!task && dev->dev_type == SAS_END_DEVICE) {
 		state = SCI_REQ_TASK_WAIT_TC_COMP;
 	} else if (task && task->task_proto == SAS_PROTOCOL_SMP) {
 		state = SCI_REQ_SMP_WAIT_RESP;
@@ -3101,7 +3101,7 @@ sci_io_request_construct(struct isci_host *ihost,
 	if (idev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX)
 		return SCI_FAILURE_INVALID_REMOTE_DEVICE;
 
-	if (dev->dev_type == SAS_END_DEV)
+	if (dev->dev_type == SAS_END_DEVICE)
 		/* pass */;
 	else if (dev_is_sata(dev))
 		memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd));
@@ -3125,7 +3125,7 @@ enum sci_status sci_task_request_construct(struct isci_host *ihost,
 	/* Build the common part of the request */
 	sci_general_request_construct(ihost, idev, ireq);
 
-	if (dev->dev_type == SAS_END_DEV || dev_is_sata(dev)) {
+	if (dev->dev_type == SAS_END_DEVICE || dev_is_sata(dev)) {
 		set_bit(IREQ_TMF, &ireq->flags);
 		memset(ireq->tc, 0, sizeof(struct scu_task_context));
 
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index b6f19a1db78..9bb020ac089 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -250,7 +250,7 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost,
 	}
 
 	/* XXX convert to get this from task->tproto like other drivers */
-	if (dev->dev_type == SAS_END_DEV) {
+	if (dev->dev_type == SAS_END_DEVICE) {
 		isci_tmf->proto = SAS_PROTOCOL_SSP;
 		status = sci_task_request_construct_ssp(ireq);
 		if (status != SCI_SUCCESS)
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index bdb81cda840..161c98efade 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -285,14 +285,14 @@ int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
 	if (phy->attached_tproto & SAS_PROTOCOL_STP)
 		dev->tproto = phy->attached_tproto;
 	if (phy->attached_sata_dev)
-		dev->tproto |= SATA_DEV;
+		dev->tproto |= SAS_SATA_DEV;
 
-	if (phy->attached_dev_type == SATA_PENDING)
-		dev->dev_type = SATA_PENDING;
+	if (phy->attached_dev_type == SAS_SATA_PENDING)
+		dev->dev_type = SAS_SATA_PENDING;
 	else {
 		int res;
 
-		dev->dev_type = SATA_DEV;
+		dev->dev_type = SAS_SATA_DEV;
 		res = sas_get_report_phy_sata(dev->parent, phy->phy_id,
 					      &dev->sata_dev.rps_resp);
 		if (res) {
@@ -314,7 +314,7 @@ static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy)
 	int res;
 
 	/* we weren't pending, so successfully end the reset sequence now */
-	if (dev->dev_type != SATA_PENDING)
+	if (dev->dev_type != SAS_SATA_PENDING)
 		return 1;
 
 	/* hmmm, if this succeeds do we need to repost the domain_device to the
@@ -348,9 +348,9 @@ static int smp_ata_check_ready(struct ata_link *link)
 		return 0;
 
 	switch (ex_phy->attached_dev_type) {
-	case SATA_PENDING:
+	case SAS_SATA_PENDING:
 		return 0;
-	case SAS_END_DEV:
+	case SAS_END_DEVICE:
 		if (ex_phy->attached_sata_dev)
 			return sas_ata_clear_pending(dev, ex_phy);
 	default:
@@ -631,7 +631,7 @@ static void sas_get_ata_command_set(struct domain_device *dev)
 	struct dev_to_host_fis *fis =
 		(struct dev_to_host_fis *) dev->frame_rcvd;
 
-	if (dev->dev_type == SATA_PENDING)
+	if (dev->dev_type == SAS_SATA_PENDING)
 		return;
 
 	if ((fis->sector_count == 1 && /* ATA */
@@ -797,7 +797,7 @@ int sas_discover_sata(struct domain_device *dev)
 {
 	int res;
 
-	if (dev->dev_type == SATA_PM)
+	if (dev->dev_type == SAS_SATA_PM)
 		return -ENODEV;
 
 	sas_get_ata_command_set(dev);
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index a0c3003e0c7..62b58d38ce2 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -39,11 +39,11 @@
 void sas_init_dev(struct domain_device *dev)
 {
 	switch (dev->dev_type) {
-	case SAS_END_DEV:
+	case SAS_END_DEVICE:
 		INIT_LIST_HEAD(&dev->ssp_dev.eh_list_node);
 		break;
-	case EDGE_DEV:
-	case FANOUT_DEV:
+	case SAS_EDGE_EXPANDER_DEVICE:
+	case SAS_FANOUT_EXPANDER_DEVICE:
 		INIT_LIST_HEAD(&dev->ex_dev.children);
 		mutex_init(&dev->ex_dev.cmd_mutex);
 		break;
@@ -93,9 +93,9 @@ static int sas_get_port_device(struct asd_sas_port *port)
 		if (fis->interrupt_reason == 1 && fis->lbal == 1 &&
 		    fis->byte_count_low==0x69 && fis->byte_count_high == 0x96
 		    && (fis->device & ~0x10) == 0)
-			dev->dev_type = SATA_PM;
+			dev->dev_type = SAS_SATA_PM;
 		else
-			dev->dev_type = SATA_DEV;
+			dev->dev_type = SAS_SATA_DEV;
 		dev->tproto = SAS_PROTOCOL_SATA;
 	} else {
 		struct sas_identify_frame *id =
@@ -109,21 +109,21 @@ static int sas_get_port_device(struct asd_sas_port *port)
 
 	dev->port = port;
 	switch (dev->dev_type) {
-	case SATA_DEV:
+	case SAS_SATA_DEV:
 		rc = sas_ata_init(dev);
 		if (rc) {
 			rphy = NULL;
 			break;
 		}
 		/* fall through */
-	case SAS_END_DEV:
+	case SAS_END_DEVICE:
 		rphy = sas_end_device_alloc(port->port);
 		break;
-	case EDGE_DEV:
+	case SAS_EDGE_EXPANDER_DEVICE:
 		rphy = sas_expander_alloc(port->port,
 					  SAS_EDGE_EXPANDER_DEVICE);
 		break;
-	case FANOUT_DEV:
+	case SAS_FANOUT_EXPANDER_DEVICE:
 		rphy = sas_expander_alloc(port->port,
 					  SAS_FANOUT_EXPANDER_DEVICE);
 		break;
@@ -156,7 +156,7 @@ static int sas_get_port_device(struct asd_sas_port *port)
 	dev->rphy = rphy;
 	get_device(&dev->rphy->dev);
 
-	if (dev_is_sata(dev) || dev->dev_type == SAS_END_DEV)
+	if (dev_is_sata(dev) || dev->dev_type == SAS_END_DEVICE)
 		list_add_tail(&dev->disco_list_node, &port->disco_list);
 	else {
 		spin_lock_irq(&port->dev_list_lock);
@@ -315,7 +315,7 @@ void sas_free_device(struct kref *kref)
 	dev->phy = NULL;
 
 	/* remove the phys and ports, everything else should be gone */
-	if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV)
+	if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
 		kfree(dev->ex_dev.ex_phy);
 
 	if (dev_is_sata(dev) && dev->sata_dev.ap) {
@@ -343,7 +343,7 @@ static void sas_unregister_common_dev(struct asd_sas_port *port, struct domain_d
 	spin_unlock_irq(&port->dev_list_lock);
 
 	spin_lock_irq(&ha->lock);
-	if (dev->dev_type == SAS_END_DEV &&
+	if (dev->dev_type == SAS_END_DEVICE &&
 	    !list_empty(&dev->ssp_dev.eh_list_node)) {
 		list_del_init(&dev->ssp_dev.eh_list_node);
 		ha->eh_active--;
@@ -457,15 +457,15 @@ static void sas_discover_domain(struct work_struct *work)
 		    task_pid_nr(current));
 
 	switch (dev->dev_type) {
-	case SAS_END_DEV:
+	case SAS_END_DEVICE:
 		error = sas_discover_end_dev(dev);
 		break;
-	case EDGE_DEV:
-	case FANOUT_DEV:
+	case SAS_EDGE_EXPANDER_DEVICE:
+	case SAS_FANOUT_EXPANDER_DEVICE:
 		error = sas_discover_root_expander(dev);
 		break;
-	case SATA_DEV:
-	case SATA_PM:
+	case SAS_SATA_DEV:
+	case SAS_SATA_PM:
 #ifdef CONFIG_SCSI_SAS_ATA
 		error = sas_discover_sata(dev);
 		break;
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 55cbd018015..74cc4a02092 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -183,21 +183,21 @@ static char sas_route_char(struct domain_device *dev, struct ex_phy *phy)
 	}
 }
 
-static enum sas_dev_type to_dev_type(struct discover_resp *dr)
+static enum sas_device_type to_dev_type(struct discover_resp *dr)
 {
 	/* This is detecting a failure to transmit initial dev to host
 	 * FIS as described in section J.5 of sas-2 r16
 	 */
-	if (dr->attached_dev_type == NO_DEVICE && dr->attached_sata_dev &&
+	if (dr->attached_dev_type == SAS_PHY_UNUSED && dr->attached_sata_dev &&
 	    dr->linkrate >= SAS_LINK_RATE_1_5_GBPS)
-		return SATA_PENDING;
+		return SAS_SATA_PENDING;
 	else
 		return dr->attached_dev_type;
 }
 
 static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
 {
-	enum sas_dev_type dev_type;
+	enum sas_device_type dev_type;
 	enum sas_linkrate linkrate;
 	u8 sas_addr[SAS_ADDR_SIZE];
 	struct smp_resp *resp = rsp;
@@ -238,7 +238,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
 	/* Handle vacant phy - rest of dr data is not valid so skip it */
 	if (phy->phy_state == PHY_VACANT) {
 		memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
-		phy->attached_dev_type = NO_DEVICE;
+		phy->attached_dev_type = SAS_PHY_UNUSED;
 		if (!test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) {
 			phy->phy_id = phy_id;
 			goto skip;
@@ -259,7 +259,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
 	/* help some expanders that fail to zero sas_address in the 'no
 	 * device' case
 	 */
-	if (phy->attached_dev_type == NO_DEVICE ||
+	if (phy->attached_dev_type == SAS_PHY_UNUSED ||
 	    phy->linkrate < SAS_LINK_RATE_1_5_GBPS)
 		memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
 	else
@@ -292,13 +292,13 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
 
  out:
 	switch (phy->attached_dev_type) {
-	case SATA_PENDING:
+	case SAS_SATA_PENDING:
 		type = "stp pending";
 		break;
-	case NO_DEVICE:
+	case SAS_PHY_UNUSED:
 		type = "no device";
 		break;
-	case SAS_END_DEV:
+	case SAS_END_DEVICE:
 		if (phy->attached_iproto) {
 			if (phy->attached_tproto)
 				type = "host+target";
@@ -311,8 +311,8 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
 				type = "ssp";
 		}
 		break;
-	case EDGE_DEV:
-	case FANOUT_DEV:
+	case SAS_EDGE_EXPANDER_DEVICE:
+	case SAS_FANOUT_EXPANDER_DEVICE:
 		type = "smp";
 		break;
 	default:
@@ -833,7 +833,7 @@ static struct domain_device *sas_ex_discover_end_dev(
 	} else
 #endif
 	  if (phy->attached_tproto & SAS_PROTOCOL_SSP) {
-		child->dev_type = SAS_END_DEV;
+		child->dev_type = SAS_END_DEVICE;
 		rphy = sas_end_device_alloc(phy->port);
 		/* FIXME: error handling */
 		if (unlikely(!rphy))
@@ -932,11 +932,11 @@ static struct domain_device *sas_ex_discover_expander(
 
 
 	switch (phy->attached_dev_type) {
-	case EDGE_DEV:
+	case SAS_EDGE_EXPANDER_DEVICE:
 		rphy = sas_expander_alloc(phy->port,
 					  SAS_EDGE_EXPANDER_DEVICE);
 		break;
-	case FANOUT_DEV:
+	case SAS_FANOUT_EXPANDER_DEVICE:
 		rphy = sas_expander_alloc(phy->port,
 					  SAS_FANOUT_EXPANDER_DEVICE);
 		break;
@@ -1013,7 +1013,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 	if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr))
 		sas_ex_disable_port(dev, ex_phy->attached_sas_addr);
 
-	if (ex_phy->attached_dev_type == NO_DEVICE) {
+	if (ex_phy->attached_dev_type == SAS_PHY_UNUSED) {
 		if (ex_phy->routing_attr == DIRECT_ROUTING) {
 			memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
 			sas_configure_routing(dev, ex_phy->attached_sas_addr);
@@ -1022,10 +1022,10 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 	} else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN)
 		return 0;
 
-	if (ex_phy->attached_dev_type != SAS_END_DEV &&
-	    ex_phy->attached_dev_type != FANOUT_DEV &&
-	    ex_phy->attached_dev_type != EDGE_DEV &&
-	    ex_phy->attached_dev_type != SATA_PENDING) {
+	if (ex_phy->attached_dev_type != SAS_END_DEVICE &&
+	    ex_phy->attached_dev_type != SAS_FANOUT_EXPANDER_DEVICE &&
+	    ex_phy->attached_dev_type != SAS_EDGE_EXPANDER_DEVICE &&
+	    ex_phy->attached_dev_type != SAS_SATA_PENDING) {
 		SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
 			    "phy 0x%x\n", ex_phy->attached_dev_type,
 			    SAS_ADDR(dev->sas_addr),
@@ -1049,11 +1049,11 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 	}
 
 	switch (ex_phy->attached_dev_type) {
-	case SAS_END_DEV:
-	case SATA_PENDING:
+	case SAS_END_DEVICE:
+	case SAS_SATA_PENDING:
 		child = sas_ex_discover_end_dev(dev, phy_id);
 		break;
-	case FANOUT_DEV:
+	case SAS_FANOUT_EXPANDER_DEVICE:
 		if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
 			SAS_DPRINTK("second fanout expander %016llx phy 0x%x "
 				    "attached to ex %016llx phy 0x%x\n",
@@ -1067,7 +1067,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 			memcpy(dev->port->disc.fanout_sas_addr,
 			       ex_phy->attached_sas_addr, SAS_ADDR_SIZE);
 		/* fallthrough */
-	case EDGE_DEV:
+	case SAS_EDGE_EXPANDER_DEVICE:
 		child = sas_ex_discover_expander(dev, phy_id);
 		break;
 	default:
@@ -1111,8 +1111,8 @@ static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
 		    phy->phy_state == PHY_NOT_PRESENT)
 			continue;
 
-		if ((phy->attached_dev_type == EDGE_DEV ||
-		     phy->attached_dev_type == FANOUT_DEV) &&
+		if ((phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+		     phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE) &&
 		    phy->routing_attr == SUBTRACTIVE_ROUTING) {
 
 			memcpy(sub_addr, phy->attached_sas_addr,SAS_ADDR_SIZE);
@@ -1130,8 +1130,8 @@ static int sas_check_level_subtractive_boundary(struct domain_device *dev)
 	u8 sub_addr[8] = {0, };
 
 	list_for_each_entry(child, &ex->children, siblings) {
-		if (child->dev_type != EDGE_DEV &&
-		    child->dev_type != FANOUT_DEV)
+		if (child->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
+		    child->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
 			continue;
 		if (sub_addr[0] == 0) {
 			sas_find_sub_addr(child, sub_addr);
@@ -1208,7 +1208,7 @@ static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
 	int i;
 	u8  *sub_sas_addr = NULL;
 
-	if (dev->dev_type != EDGE_DEV)
+	if (dev->dev_type != SAS_EDGE_EXPANDER_DEVICE)
 		return 0;
 
 	for (i = 0; i < ex->num_phys; i++) {
@@ -1218,8 +1218,8 @@ static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
 		    phy->phy_state == PHY_NOT_PRESENT)
 			continue;
 
-		if ((phy->attached_dev_type == FANOUT_DEV ||
-		     phy->attached_dev_type == EDGE_DEV) &&
+		if ((phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
+		     phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE) &&
 		    phy->routing_attr == SUBTRACTIVE_ROUTING) {
 
 			if (!sub_sas_addr)
@@ -1245,8 +1245,8 @@ static void sas_print_parent_topology_bug(struct domain_device *child,
 						 struct ex_phy *child_phy)
 {
 	static const char *ex_type[] = {
-		[EDGE_DEV] = "edge",
-		[FANOUT_DEV] = "fanout",
+		[SAS_EDGE_EXPANDER_DEVICE] = "edge",
+		[SAS_FANOUT_EXPANDER_DEVICE] = "fanout",
 	};
 	struct domain_device *parent = child->parent;
 
@@ -1321,8 +1321,8 @@ static int sas_check_parent_topology(struct domain_device *child)
 	if (!child->parent)
 		return 0;
 
-	if (child->parent->dev_type != EDGE_DEV &&
-	    child->parent->dev_type != FANOUT_DEV)
+	if (child->parent->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
+	    child->parent->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
 		return 0;
 
 	parent_ex = &child->parent->ex_dev;
@@ -1341,8 +1341,8 @@ static int sas_check_parent_topology(struct domain_device *child)
 		child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id];
 
 		switch (child->parent->dev_type) {
-		case EDGE_DEV:
-			if (child->dev_type == FANOUT_DEV) {
+		case SAS_EDGE_EXPANDER_DEVICE:
+			if (child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
 				if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING ||
 				    child_phy->routing_attr != TABLE_ROUTING) {
 					sas_print_parent_topology_bug(child, parent_phy, child_phy);
@@ -1366,7 +1366,7 @@ static int sas_check_parent_topology(struct domain_device *child)
 				}
 			}
 			break;
-		case FANOUT_DEV:
+		case SAS_FANOUT_EXPANDER_DEVICE:
 			if (parent_phy->routing_attr != TABLE_ROUTING ||
 			    child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
 				sas_print_parent_topology_bug(child, parent_phy, child_phy);
@@ -1619,8 +1619,8 @@ static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
 	struct domain_device *dev;
 
 	list_for_each_entry(dev, &port->dev_list, dev_list_node) {
-		if (dev->dev_type == EDGE_DEV ||
-		    dev->dev_type == FANOUT_DEV) {
+		if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+		    dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
 			struct sas_expander_device *ex =
 				rphy_to_expander_device(dev->rphy);
 
@@ -1720,7 +1720,7 @@ static int sas_get_phy_change_count(struct domain_device *dev,
 }
 
 static int sas_get_phy_attached_dev(struct domain_device *dev, int phy_id,
-				    u8 *sas_addr, enum sas_dev_type *type)
+				    u8 *sas_addr, enum sas_device_type *type)
 {
 	int res;
 	struct smp_resp *disc_resp;
@@ -1849,7 +1849,7 @@ static int sas_find_bcast_dev(struct domain_device *dev,
 			SAS_DPRINTK("Expander phys DID NOT change\n");
 	}
 	list_for_each_entry(ch, &ex->children, siblings) {
-		if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) {
+		if (ch->dev_type == SAS_EDGE_EXPANDER_DEVICE || ch->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
 			res = sas_find_bcast_dev(ch, src_dev);
 			if (*src_dev)
 				return res;
@@ -1866,8 +1866,8 @@ static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_devi
 
 	list_for_each_entry_safe(child, n, &ex->children, siblings) {
 		set_bit(SAS_DEV_GONE, &child->state);
-		if (child->dev_type == EDGE_DEV ||
-		    child->dev_type == FANOUT_DEV)
+		if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+		    child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
 			sas_unregister_ex_tree(port, child);
 		else
 			sas_unregister_dev(port, child);
@@ -1887,8 +1887,8 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent,
 			if (SAS_ADDR(child->sas_addr) ==
 			    SAS_ADDR(phy->attached_sas_addr)) {
 				set_bit(SAS_DEV_GONE, &child->state);
-				if (child->dev_type == EDGE_DEV ||
-				    child->dev_type == FANOUT_DEV)
+				if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+				    child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
 					sas_unregister_ex_tree(parent->port, child);
 				else
 					sas_unregister_dev(parent->port, child);
@@ -1916,8 +1916,8 @@ static int sas_discover_bfs_by_root_level(struct domain_device *root,
 	int res = 0;
 
 	list_for_each_entry(child, &ex_root->children, siblings) {
-		if (child->dev_type == EDGE_DEV ||
-		    child->dev_type == FANOUT_DEV) {
+		if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+		    child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
 			struct sas_expander_device *ex =
 				rphy_to_expander_device(child->rphy);
 
@@ -1970,8 +1970,8 @@ static int sas_discover_new(struct domain_device *dev, int phy_id)
 	list_for_each_entry(child, &dev->ex_dev.children, siblings) {
 		if (SAS_ADDR(child->sas_addr) ==
 		    SAS_ADDR(ex_phy->attached_sas_addr)) {
-			if (child->dev_type == EDGE_DEV ||
-			    child->dev_type == FANOUT_DEV)
+			if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+			    child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
 				res = sas_discover_bfs_by_root(child);
 			break;
 		}
@@ -1979,16 +1979,16 @@ static int sas_discover_new(struct domain_device *dev, int phy_id)
 	return res;
 }
 
-static bool dev_type_flutter(enum sas_dev_type new, enum sas_dev_type old)
+static bool dev_type_flutter(enum sas_device_type new, enum sas_device_type old)
 {
 	if (old == new)
 		return true;
 
 	/* treat device directed resets as flutter, if we went
-	 * SAS_END_DEV to SATA_PENDING the link needs recovery
+	 * SAS_END_DEVICE to SAS_SATA_PENDING the link needs recovery
 	 */
-	if ((old == SATA_PENDING && new == SAS_END_DEV) ||
-	    (old == SAS_END_DEV && new == SATA_PENDING))
+	if ((old == SAS_SATA_PENDING && new == SAS_END_DEVICE) ||
+	    (old == SAS_END_DEVICE && new == SAS_SATA_PENDING))
 		return true;
 
 	return false;
@@ -1998,7 +1998,7 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
 {
 	struct expander_device *ex = &dev->ex_dev;
 	struct ex_phy *phy = &ex->ex_phy[phy_id];
-	enum sas_dev_type type = NO_DEVICE;
+	enum sas_device_type type = SAS_PHY_UNUSED;
 	u8 sas_addr[8];
 	int res;
 
@@ -2032,7 +2032,7 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
 
 		sas_ex_phy_discover(dev, phy_id);
 
-		if (ata_dev && phy->attached_dev_type == SATA_PENDING)
+		if (ata_dev && phy->attached_dev_type == SAS_SATA_PENDING)
 			action = ", needs recovery";
 		SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter%s\n",
 			    SAS_ADDR(dev->sas_addr), phy_id, action);
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 1de67964e5a..7e7ba83f0a2 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -131,16 +131,16 @@ static inline void sas_fill_in_rphy(struct domain_device *dev,
 	rphy->identify.initiator_port_protocols = dev->iproto;
 	rphy->identify.target_port_protocols = dev->tproto;
 	switch (dev->dev_type) {
-	case SATA_DEV:
+	case SAS_SATA_DEV:
 		/* FIXME: need sata device type */
-	case SAS_END_DEV:
-	case SATA_PENDING:
+	case SAS_END_DEVICE:
+	case SAS_SATA_PENDING:
 		rphy->identify.device_type = SAS_END_DEVICE;
 		break;
-	case EDGE_DEV:
+	case SAS_EDGE_EXPANDER_DEVICE:
 		rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
 		break;
-	case FANOUT_DEV:
+	case SAS_FANOUT_EXPANDER_DEVICE:
 		rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
 		break;
 	default:
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index 1398b714c01..d3c5297c6c8 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -69,7 +69,7 @@ static void sas_resume_port(struct asd_sas_phy *phy)
 			continue;
 		}
 
-		if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) {
+		if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
 			dev->ex_dev.ex_change_count = -1;
 			for (i = 0; i < dev->ex_dev.num_phys; i++) {
 				struct ex_phy *phy = &dev->ex_dev.ex_phy[i];
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 74550922ad5..7b7381d7671 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -254,7 +254,7 @@ static int mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost)
 	}
 	for (i = 0; i < MVS_MAX_DEVICES; i++) {
 		mvi->devices[i].taskfileset = MVS_ID_NOT_MAPPED;
-		mvi->devices[i].dev_type = NO_DEVICE;
+		mvi->devices[i].dev_type = SAS_PHY_UNUSED;
 		mvi->devices[i].device_id = i;
 		mvi->devices[i].dev_status = MVS_DEV_NORMAL;
 		init_timer(&mvi->devices[i].timer);
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
index 532110f4562..c9e244984e3 100644
--- a/drivers/scsi/mvsas/mv_sas.c
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -706,7 +706,7 @@ static int mvs_task_prep_ssp(struct mvs_info *mvi,
 	return 0;
 }
 
-#define	DEV_IS_GONE(mvi_dev)	((!mvi_dev || (mvi_dev->dev_type == NO_DEVICE)))
+#define	DEV_IS_GONE(mvi_dev)	((!mvi_dev || (mvi_dev->dev_type == SAS_PHY_UNUSED)))
 static int mvs_task_prep(struct sas_task *task, struct mvs_info *mvi, int is_tmf,
 				struct mvs_tmf_task *tmf, int *pass)
 {
@@ -726,7 +726,7 @@ static int mvs_task_prep(struct sas_task *task, struct mvs_info *mvi, int is_tmf
 		 * libsas will use dev->port, should
 		 * not call task_done for sata
 		 */
-		if (dev->dev_type != SATA_DEV)
+		if (dev->dev_type != SAS_SATA_DEV)
 			task->task_done(task);
 		return rc;
 	}
@@ -1159,10 +1159,10 @@ void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st)
 			phy->identify.device_type =
 				phy->att_dev_info & PORT_DEV_TYPE_MASK;
 
-			if (phy->identify.device_type == SAS_END_DEV)
+			if (phy->identify.device_type == SAS_END_DEVICE)
 				phy->identify.target_port_protocols =
 							SAS_PROTOCOL_SSP;
-			else if (phy->identify.device_type != NO_DEVICE)
+			else if (phy->identify.device_type != SAS_PHY_UNUSED)
 				phy->identify.target_port_protocols =
 							SAS_PROTOCOL_SMP;
 			if (oob_done)
@@ -1260,7 +1260,7 @@ struct mvs_device *mvs_alloc_dev(struct mvs_info *mvi)
 {
 	u32 dev;
 	for (dev = 0; dev < MVS_MAX_DEVICES; dev++) {
-		if (mvi->devices[dev].dev_type == NO_DEVICE) {
+		if (mvi->devices[dev].dev_type == SAS_PHY_UNUSED) {
 			mvi->devices[dev].device_id = dev;
 			return &mvi->devices[dev];
 		}
@@ -1278,7 +1278,7 @@ void mvs_free_dev(struct mvs_device *mvi_dev)
 	u32 id = mvi_dev->device_id;
 	memset(mvi_dev, 0, sizeof(*mvi_dev));
 	mvi_dev->device_id = id;
-	mvi_dev->dev_type = NO_DEVICE;
+	mvi_dev->dev_type = SAS_PHY_UNUSED;
 	mvi_dev->dev_status = MVS_DEV_NORMAL;
 	mvi_dev->taskfileset = MVS_ID_NOT_MAPPED;
 }
@@ -1480,7 +1480,7 @@ static int mvs_debug_I_T_nexus_reset(struct domain_device *dev)
 {
 	int rc;
 	struct sas_phy *phy = sas_get_local_phy(dev);
-	int reset_type = (dev->dev_type == SATA_DEV ||
+	int reset_type = (dev->dev_type == SAS_SATA_DEV ||
 			(dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
 	rc = sas_phy_reset(phy, reset_type);
 	sas_put_local_phy(phy);
@@ -1629,7 +1629,7 @@ int mvs_abort_task(struct sas_task *task)
 
 	} else if (task->task_proto & SAS_PROTOCOL_SATA ||
 		task->task_proto & SAS_PROTOCOL_STP) {
-		if (SATA_DEV == dev->dev_type) {
+		if (SAS_SATA_DEV == dev->dev_type) {
 			struct mvs_slot_info *slot = task->lldd_task;
 			u32 slot_idx = (u32)(slot - mvi->slot_info);
 			mv_dprintk("mvs_abort_task() mvi=%p task=%p "
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index 9f3cc13a5ce..60e2fb7f2dc 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -67,7 +67,7 @@ extern const struct mvs_dispatch mvs_94xx_dispatch;
 extern struct kmem_cache *mvs_task_list_cache;
 
 #define DEV_IS_EXPANDER(type)	\
-	((type == EDGE_DEV) || (type == FANOUT_DEV))
+	((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
 
 #define bit(n) ((u64)1 << n)
 
@@ -241,7 +241,7 @@ struct mvs_phy {
 
 struct mvs_device {
 	struct list_head		dev_entry;
-	enum sas_dev_type dev_type;
+	enum sas_device_type dev_type;
 	struct mvs_info *mvi_info;
 	struct domain_device *sas_device;
 	struct timer_list timer;
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 95d04cc78c0..69dd49c05f1 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1505,7 +1505,7 @@ void pm8001_work_fn(struct work_struct *work)
 	pm8001_dev = pw->data; /* Most stash device structure */
 	if ((pm8001_dev == NULL)
 	 || ((pw->handler != IO_XFER_ERROR_BREAK)
-	  && (pm8001_dev->dev_type == NO_DEVICE))) {
+	  && (pm8001_dev->dev_type == SAS_PHY_UNUSED))) {
 		kfree(pw);
 		return;
 	}
@@ -3443,7 +3443,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		sizeof(struct dev_to_host_fis));
 	phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
 	phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
-	phy->identify.device_type = SATA_DEV;
+	phy->identify.device_type = SAS_SATA_DEV;
 	pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
 	spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
 	pm8001_bytes_dmaed(pm8001_ha, phy_id);
@@ -4465,7 +4465,7 @@ pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
 	payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
 		LINKMODE_AUTO |	LINKRATE_15 |
 		LINKRATE_30 | LINKRATE_60 | phy_id);
-	payload.sas_identify.dev_type = SAS_END_DEV;
+	payload.sas_identify.dev_type = SAS_END_DEVICE;
 	payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
 	memcpy(payload.sas_identify.sas_addr,
 		pm8001_ha->sas_addr, SAS_ADDR_SIZE);
@@ -4527,11 +4527,11 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
 	if (flag == 1)
 		stp_sspsmp_sata = 0x02; /*direct attached sata */
 	else {
-		if (pm8001_dev->dev_type == SATA_DEV)
+		if (pm8001_dev->dev_type == SAS_SATA_DEV)
 			stp_sspsmp_sata = 0x00; /* stp*/
-		else if (pm8001_dev->dev_type == SAS_END_DEV ||
-			pm8001_dev->dev_type == EDGE_DEV ||
-			pm8001_dev->dev_type == FANOUT_DEV)
+		else if (pm8001_dev->dev_type == SAS_END_DEVICE ||
+			pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+			pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
 			stp_sspsmp_sata = 0x01; /*ssp or smp*/
 	}
 	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
@@ -4662,9 +4662,9 @@ int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
 	PM8001_EH_DBG(pm8001_ha,
 		pm8001_printk("cmd_tag = %x, abort task tag = 0x%x",
 			cmd_tag, task_tag));
-	if (pm8001_dev->dev_type == SAS_END_DEV)
+	if (pm8001_dev->dev_type == SAS_END_DEVICE)
 		opc = OPC_INB_SSP_ABORT;
-	else if (pm8001_dev->dev_type == SATA_DEV)
+	else if (pm8001_dev->dev_type == SAS_SATA_DEV)
 		opc = OPC_INB_SATA_ABORT;
 	else
 		opc = OPC_INB_SMP_ABORT;/* SMP */
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 1c718520036..e4b9bc7f541 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -361,7 +361,7 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
 
 	pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
 	for (i = 0; i < PM8001_MAX_DEVICES; i++) {
-		pm8001_ha->devices[i].dev_type = NO_DEVICE;
+		pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
 		pm8001_ha->devices[i].id = i;
 		pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
 		pm8001_ha->devices[i].running_req = 0;
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 9af95853f84..a85d73de7c8 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -357,7 +357,7 @@ static int sas_find_local_port_id(struct domain_device *dev)
   * @tmf: the task management IU
   */
 #define DEV_IS_GONE(pm8001_dev)	\
-	((!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE)))
+	((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
 static int pm8001_task_exec(struct sas_task *task, const int num,
 	gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
 {
@@ -375,7 +375,7 @@ static int pm8001_task_exec(struct sas_task *task, const int num,
 		struct task_status_struct *tsm = &t->task_status;
 		tsm->resp = SAS_TASK_UNDELIVERED;
 		tsm->stat = SAS_PHY_DOWN;
-		if (dev->dev_type != SATA_DEV)
+		if (dev->dev_type != SAS_SATA_DEV)
 			t->task_done(t);
 		return 0;
 	}
@@ -553,7 +553,7 @@ struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
 {
 	u32 dev;
 	for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
-		if (pm8001_ha->devices[dev].dev_type == NO_DEVICE) {
+		if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) {
 			pm8001_ha->devices[dev].id = dev;
 			return &pm8001_ha->devices[dev];
 		}
@@ -589,7 +589,7 @@ static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
 	u32 id = pm8001_dev->id;
 	memset(pm8001_dev, 0, sizeof(*pm8001_dev));
 	pm8001_dev->id = id;
-	pm8001_dev->dev_type = NO_DEVICE;
+	pm8001_dev->dev_type = SAS_PHY_UNUSED;
 	pm8001_dev->device_id = PM8001_MAX_DEVICES;
 	pm8001_dev->sas_device = NULL;
 }
@@ -647,7 +647,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
 			res = -1;
 		}
 	} else {
-		if (dev->dev_type == SATA_DEV) {
+		if (dev->dev_type == SAS_SATA_DEV) {
 			pm8001_device->attached_phy =
 				dev->rphy->identify.phy_identifier;
 				flag = 1; /* directly sata*/
@@ -657,7 +657,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
 	PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
 	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 	wait_for_completion(&completion);
-	if (dev->dev_type == SAS_END_DEV)
+	if (dev->dev_type == SAS_END_DEVICE)
 		msleep(50);
 	pm8001_ha->flags = PM8001F_RUN_TIME;
 	return 0;
@@ -927,7 +927,7 @@ void pm8001_open_reject_retry(
 		struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];
 
 		pm8001_dev = ccb->device;
-		if (!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE))
+		if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))
 			continue;
 		if (!device_to_close) {
 			uintptr_t d = (uintptr_t)pm8001_dev
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 72d46ea398d..570819464d9 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -103,7 +103,7 @@ do {						\
 #define PM8001_READ_VPD
 
 
-#define DEV_IS_EXPANDER(type)	((type == EDGE_DEV) || (type == FANOUT_DEV))
+#define DEV_IS_EXPANDER(type)	((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
 
 #define PM8001_NAME_LENGTH		32/* generic length of strings */
 extern struct list_head hba_list;
@@ -206,7 +206,7 @@ struct pm8001_phy {
 };
 
 struct pm8001_device {
-	enum sas_dev_type	dev_type;
+	enum sas_device_type	dev_type;
 	struct domain_device	*sas_device;
 	u32			attached_phy;
 	u32			id;
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 670998a8ca7..302514d8157 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -2684,7 +2684,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		sizeof(struct dev_to_host_fis));
 	phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
 	phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
-	phy->identify.device_type = SATA_DEV;
+	phy->identify.device_type = SAS_SATA_DEV;
 	pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
 	spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
 	pm8001_bytes_dmaed(pm8001_ha, phy_id);
@@ -3952,7 +3952,7 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
 	Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need
 	**/
 
-	payload.sas_identify.dev_type = SAS_END_DEV;
+	payload.sas_identify.dev_type = SAS_END_DEVICE;
 	payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
 	memcpy(payload.sas_identify.sas_addr,
 		pm8001_ha->sas_addr, SAS_ADDR_SIZE);
@@ -4015,11 +4015,11 @@ static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
 	if (flag == 1) {
 		stp_sspsmp_sata = 0x02; /*direct attached sata */
 	} else {
-		if (pm8001_dev->dev_type == SATA_DEV)
+		if (pm8001_dev->dev_type == SAS_SATA_DEV)
 			stp_sspsmp_sata = 0x00; /* stp*/
-		else if (pm8001_dev->dev_type == SAS_END_DEV ||
-			pm8001_dev->dev_type == EDGE_DEV ||
-			pm8001_dev->dev_type == FANOUT_DEV)
+		else if (pm8001_dev->dev_type == SAS_END_DEVICE ||
+			pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+			pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
 			stp_sspsmp_sata = 0x01; /*ssp or smp*/
 	}
 	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))