Merge tag 'musb-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:
	usb: musb: patches for v3.9 merge window

	Mostly fixes all over which weren't urgent enough for
	the late -rc cycle.

	There is a Double Buffering fix for Host Mode TX,
	a dependency fix for the transceiver driver, some
	fixes to the error path and a fix for the use of
	omap_musb_maibox.

	Other than these fixes, there a removal duplicate
	headers from the dsps glue layer and removal of
	redundant assignments in omap2430_probe().

11 files changed, 79 insertions, 39 deletions

diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index c107d7cdfa6..59eea219034 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -365,7 +365,7 @@ static int am35x_musb_init(struct musb *musb)
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (IS_ERR_OR_NULL(musb->xceiv))
-		return -ENODEV;
+		return -EPROBE_DEFER;
 
 	setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
 
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 14dab9f9b3d..dbb31b30c7f 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -406,7 +406,7 @@ static int bfin_musb_init(struct musb *musb)
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		gpio_free(musb->config->gpio_vrsel);
-		return -ENODEV;
+		return -EPROBE_DEFER;
 	}
 
 	bfin_musb_reg_init(musb);
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 97996af2646..7c71769d71f 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -410,6 +410,7 @@ static int da8xx_musb_init(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 rev;
+	int ret = -ENODEV;
 
 	musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
 
@@ -420,8 +421,10 @@ static int da8xx_musb_init(struct musb *musb)
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (IS_ERR_OR_NULL(musb->xceiv))
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
+		ret = -EPROBE_DEFER;
 		goto fail;
+	}
 
 	setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
 
@@ -441,7 +444,7 @@ static int da8xx_musb_init(struct musb *musb)
 	musb->isr = da8xx_musb_interrupt;
 	return 0;
 fail:
-	return -ENODEV;
+	return ret;
 }
 
 static int da8xx_musb_exit(struct musb *musb)
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index b1c01cad28b..e040d910373 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -380,11 +380,14 @@ static int davinci_musb_init(struct musb *musb)
 {
 	void __iomem	*tibase = musb->ctrl_base;
 	u32		revision;
+	int 		ret = -ENODEV;
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (IS_ERR_OR_NULL(musb->xceiv))
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
+		ret = -EPROBE_DEFER;
 		goto unregister;
+	}
 
 	musb->mregs += DAVINCI_BASE_OFFSET;
 
@@ -438,7 +441,7 @@ fail:
 	usb_put_phy(musb->xceiv);
 unregister:
 	usb_nop_xceiv_unregister();
-	return -ENODEV;
+	return ret;
 }
 
 static int davinci_musb_exit(struct musb *musb)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index fd3486745e6..60b41cc28da 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1993,6 +1993,7 @@ fail2:
 	musb_platform_exit(musb);
 
 fail1:
+	pm_runtime_disable(musb->controller);
 	dev_err(musb->controller,
 		"musb_init_controller failed with status %d\n", status);
 
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index f7d764de6fd..7f5c215e560 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -31,7 +31,6 @@
 
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/of.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
@@ -419,7 +418,7 @@ static int dsps_musb_init(struct musb *musb)
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (IS_ERR_OR_NULL(musb->xceiv))
-		return -ENODEV;
+		return -EPROBE_DEFER;
 
 	/* Returns zero if e.g. not clocked */
 	rev = dsps_readl(reg_base, wrp->revision);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 876787438c2..be18537c5f1 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -408,7 +408,19 @@ static void txstate(struct musb *musb, struct musb_request *req)
 					csr |= (MUSB_TXCSR_DMAENAB
 							| MUSB_TXCSR_DMAMODE
 							| MUSB_TXCSR_MODE);
-					if (!musb_ep->hb_mult)
+					/*
+					 * Enable Autoset according to table
+					 * below
+					 * bulk_split hb_mult	Autoset_Enable
+					 *	0	0	Yes(Normal)
+					 *	0	>0	No(High BW ISO)
+					 *	1	0	Yes(HS bulk)
+					 *	1	>0	Yes(FS bulk)
+					 */
+					if (!musb_ep->hb_mult ||
+						(musb_ep->hb_mult &&
+						 can_bulk_split(musb,
+						    musb_ep->type)))
 						csr |= MUSB_TXCSR_AUTOSET;
 				}
 				csr &= ~MUSB_TXCSR_P_UNDERRUN;
@@ -1110,11 +1122,15 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		/* Set TXMAXP with the FIFO size of the endpoint
 		 * to disable double buffering mode.
 		 */
-		if (musb->double_buffer_not_ok)
+		if (musb->double_buffer_not_ok) {
 			musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
-		else
+		} else {
+			if (can_bulk_split(musb, musb_ep->type))
+				musb_ep->hb_mult = (hw_ep->max_packet_sz_tx /
+							musb_ep->packet_sz) - 1;
 			musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
 					| (musb_ep->hb_mult << 11));
+		}
 
 		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
 		if (musb_readw(regs, MUSB_TXCSR)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index e9f0fd9ddd2..1ce1fcf3f3e 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -634,7 +634,17 @@ static bool musb_tx_dma_program(struct dma_controller *dma,
 		mode = 1;
 		csr |= MUSB_TXCSR_DMAMODE | MUSB_TXCSR_DMAENAB;
 		/* autoset shouldn't be set in high bandwidth */
-		if (qh->hb_mult == 1)
+		/*
+		 * Enable Autoset according to table
+		 * below
+		 * bulk_split hb_mult	Autoset_Enable
+		 *	0	1	Yes(Normal)
+		 *	0	>1	No(High BW ISO)
+		 *	1	1	Yes(HS bulk)
+		 *	1	>1	Yes(FS bulk)
+		 */
+		if (qh->hb_mult == 1 || (qh->hb_mult > 1 &&
+					can_bulk_split(hw_ep->musb, qh->type)))
 			csr |= MUSB_TXCSR_AUTOSET;
 	} else {
 		mode = 0;
@@ -746,7 +756,13 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 		/* general endpoint setup */
 		if (epnum) {
 			/* flush all old state, set default */
-			musb_h_tx_flush_fifo(hw_ep);
+			/*
+			 * We could be flushing valid
+			 * packets in double buffering
+			 * case
+			 */
+			if (!hw_ep->tx_double_buffered)
+				musb_h_tx_flush_fifo(hw_ep);
 
 			/*
 			 * We must not clear the DMAMODE bit before or in
@@ -763,11 +779,13 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 					);
 			csr |= MUSB_TXCSR_MODE;
 
-			if (usb_gettoggle(urb->dev, qh->epnum, 1))
-				csr |= MUSB_TXCSR_H_WR_DATATOGGLE
-					| MUSB_TXCSR_H_DATATOGGLE;
-			else
-				csr |= MUSB_TXCSR_CLRDATATOG;
+			if (!hw_ep->tx_double_buffered) {
+				if (usb_gettoggle(urb->dev, qh->epnum, 1))
+					csr |= MUSB_TXCSR_H_WR_DATATOGGLE
+						| MUSB_TXCSR_H_DATATOGGLE;
+				else
+					csr |= MUSB_TXCSR_CLRDATATOG;
+			}
 
 			musb_writew(epio, MUSB_TXCSR, csr);
 			/* REVISIT may need to clear FLUSHFIFO ... */
@@ -791,17 +809,19 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 		/* protocol/endpoint/interval/NAKlimit */
 		if (epnum) {
 			musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
-			if (musb->double_buffer_not_ok)
+			if (musb->double_buffer_not_ok) {
 				musb_writew(epio, MUSB_TXMAXP,
 						hw_ep->max_packet_sz_tx);
-			else if (can_bulk_split(musb, qh->type))
+			} else if (can_bulk_split(musb, qh->type)) {
+				qh->hb_mult = hw_ep->max_packet_sz_tx
+						/ packet_sz;
 				musb_writew(epio, MUSB_TXMAXP, packet_sz
-					| ((hw_ep->max_packet_sz_tx /
-						packet_sz) - 1) << 11);
-			else
+					| ((qh->hb_mult) - 1) << 11);
+			} else {
 				musb_writew(epio, MUSB_TXMAXP,
 						qh->maxpacket |
 						((qh->hb_mult - 1) << 11));
+			}
 			musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
 		} else {
 			musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index da00af46079..bb48796e521 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -255,11 +255,11 @@ static inline void omap2430_low_level_init(struct musb *musb)
 void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
 {
 	struct omap2430_glue	*glue = _glue;
-	struct musb		*musb = glue_to_musb(glue);
 
-	glue->status = status;
-	if (!musb) {
-		dev_err(glue->dev, "musb core is not yet ready\n");
+	if (glue && glue_to_musb(glue)) {
+		glue->status = status;
+	} else {
+		pr_err("%s: musb core is not yet ready\n", __func__);
 		return;
 	}
 
@@ -369,7 +369,7 @@ static int omap2430_musb_init(struct musb *musb)
 	musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
 	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		pr_err("HS USB OTG: no transceiver configured\n");
-		return -ENODEV;
+		return -EPROBE_DEFER;
 	}
 
 	musb->isr = omap2430_musb_interrupt;
@@ -532,20 +532,18 @@ static int omap2430_probe(struct platform_device *pdev)
 		if (!pdata) {
 			dev_err(&pdev->dev,
 				"failed to allocate musb platfrom data\n");
-			ret = -ENOMEM;
 			goto err2;
 		}
 
 		data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 		if (!data) {
 			dev_err(&pdev->dev,
-					"failed to allocate musb board data\n");
-			ret = -ENOMEM;
+				"failed to allocate musb board data\n");
 			goto err2;
 		}
 
 		config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
-		if (!data) {
+		if (!config) {
 			dev_err(&pdev->dev,
 				"failed to allocate musb hdrc config\n");
 			goto err2;
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 3969813c217..464bd23cccd 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1069,7 +1069,7 @@ static int tusb_musb_init(struct musb *musb)
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (IS_ERR_OR_NULL(musb->xceiv))
-		return -ENODEV;
+		return -EPROBE_DEFER;
 
 	pdev = to_platform_device(musb->controller);
 
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index a27ca1a9c99..13a39291376 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -61,7 +61,7 @@ static int ux500_musb_init(struct musb *musb)
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		pr_err("HS USB OTG: no transceiver configured\n");
-		return -ENODEV;
+		return -EPROBE_DEFER;
 	}
 
 	musb->isr = ux500_musb_interrupt;
@@ -108,7 +108,7 @@ static int ux500_probe(struct platform_device *pdev)
 		goto err3;
 	}
 
-	ret = clk_enable(clk);
+	ret = clk_prepare_enable(clk);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to enable clock\n");
 		goto err4;
@@ -148,7 +148,7 @@ static int ux500_probe(struct platform_device *pdev)
 	return 0;
 
 err5:
-	clk_disable(clk);
+	clk_disable_unprepare(clk);
 
 err4:
 	clk_put(clk);
@@ -168,7 +168,7 @@ static int ux500_remove(struct platform_device *pdev)
 	struct ux500_glue	*glue = platform_get_drvdata(pdev);
 
 	platform_device_unregister(glue->musb);
-	clk_disable(glue->clk);
+	clk_disable_unprepare(glue->clk);
 	clk_put(glue->clk);
 	kfree(glue);
 
@@ -182,7 +182,7 @@ static int ux500_suspend(struct device *dev)
 	struct musb		*musb = glue_to_musb(glue);
 
 	usb_phy_set_suspend(musb->xceiv, 1);
-	clk_disable(glue->clk);
+	clk_disable_unprepare(glue->clk);
 
 	return 0;
 }
@@ -193,7 +193,7 @@ static int ux500_resume(struct device *dev)
 	struct musb		*musb = glue_to_musb(glue);
 	int			ret;
 
-	ret = clk_enable(glue->clk);
+	ret = clk_prepare_enable(glue->clk);
 	if (ret) {
 		dev_err(dev, "failed to enable clock\n");
 		return ret;