diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-09-25 07:22:11 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-09-25 07:22:11 -0700 |
| commit | 5c3cc2084dd9dc26b258f88abb629550090956e0 (patch) | |
| tree | 78bad2d2f412e0700384268f065823879f8ef1da /drivers | |
| parent | 851b147e4411df6a1e7e90e2a609773c277eefd2 (diff) | |
| parent | b8273570f802a7658827dcb077b0b517ba75a289 (diff) | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits)
genetlink: fix netns vs. netlink table locking (2)
3c59x: Get rid of "Trying to free already-free IRQ"
tunnel: eliminate recursion field
ems_pci: fix size of CAN controllers BAR mapping for CPC-PCI v2
net: fix htmldocs sunrpc, clnt.c
Phonet: error on broadcast sending (unimplemented)
Phonet: fix race for port number in concurrent bind()
pktgen: better scheduler friendliness
pktgen: T_TERMINATE flag is unused
ipv4: check optlen for IP_MULTICAST_IF option
ath9k: Initialize txgain and rxgain for newer AR9287 chipsets.
iwlagn: fix panic in iwl{5000,4965}_rx_reply_tx
ath9k: Fix RFKILL bugs
drivers/net/wireless: Use usb_endpoint_dir_out
cfg80211: don't overwrite privacy setting
wl12xx: fix kconfig/link errors
rt2x00: fix the definition of rt2x00crypto_rx_insert_iv
iwlwifi: reduce noise when skb allocation fails
iwlwifi: do not send sync command while holding spinlock
mac80211: fix DTIM setting
...
Diffstat (limited to 'drivers')
71 files changed, 2417 insertions, 2757 deletions
diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 2de64065aa1..29e66d603d3 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -790,11 +790,15 @@ he_init_group(struct he_dev *he_dev, int group) he_dev->rbps_base = pci_alloc_consistent(he_dev->pci_dev, CONFIG_RBPS_SIZE * sizeof(struct he_rbp), &he_dev->rbps_phys); if (he_dev->rbps_base == NULL) { - hprintk("failed to alloc rbps\n"); - return -ENOMEM; + hprintk("failed to alloc rbps_base\n"); + goto out_destroy_rbps_pool; } memset(he_dev->rbps_base, 0, CONFIG_RBPS_SIZE * sizeof(struct he_rbp)); he_dev->rbps_virt = kmalloc(CONFIG_RBPS_SIZE * sizeof(struct he_virt), GFP_KERNEL); + if (he_dev->rbps_virt == NULL) { + hprintk("failed to alloc rbps_virt\n"); + goto out_free_rbps_base; + } for (i = 0; i < CONFIG_RBPS_SIZE; ++i) { dma_addr_t dma_handle; @@ -802,7 +806,7 @@ he_init_group(struct he_dev *he_dev, int group) cpuaddr = pci_pool_alloc(he_dev->rbps_pool, GFP_KERNEL|GFP_DMA, &dma_handle); if (cpuaddr == NULL) - return -ENOMEM; + goto out_free_rbps_virt; he_dev->rbps_virt[i].virt = cpuaddr; he_dev->rbps_base[i].status = RBP_LOANED | RBP_SMALLBUF | (i << RBP_INDEX_OFF); @@ -827,17 +831,21 @@ he_init_group(struct he_dev *he_dev, int group) CONFIG_RBPL_BUFSIZE, 8, 0); if (he_dev->rbpl_pool == NULL) { hprintk("unable to create rbpl pool\n"); - return -ENOMEM; + goto out_free_rbps_virt; } he_dev->rbpl_base = pci_alloc_consistent(he_dev->pci_dev, CONFIG_RBPL_SIZE * sizeof(struct he_rbp), &he_dev->rbpl_phys); if (he_dev->rbpl_base == NULL) { - hprintk("failed to alloc rbpl\n"); - return -ENOMEM; + hprintk("failed to alloc rbpl_base\n"); + goto out_destroy_rbpl_pool; } memset(he_dev->rbpl_base, 0, CONFIG_RBPL_SIZE * sizeof(struct he_rbp)); he_dev->rbpl_virt = kmalloc(CONFIG_RBPL_SIZE * sizeof(struct he_virt), GFP_KERNEL); + if (he_dev->rbpl_virt == NULL) { + hprintk("failed to alloc rbpl_virt\n"); + goto out_free_rbpl_base; + } for (i = 0; i < CONFIG_RBPL_SIZE; ++i) { dma_addr_t dma_handle; @@ -845,7 +853,7 @@ he_init_group(struct he_dev *he_dev, int group) cpuaddr = pci_pool_alloc(he_dev->rbpl_pool, GFP_KERNEL|GFP_DMA, &dma_handle); if (cpuaddr == NULL) - return -ENOMEM; + goto out_free_rbpl_virt; he_dev->rbpl_virt[i].virt = cpuaddr; he_dev->rbpl_base[i].status = RBP_LOANED | (i << RBP_INDEX_OFF); @@ -870,7 +878,7 @@ he_init_group(struct he_dev *he_dev, int group) CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq), &he_dev->rbrq_phys); if (he_dev->rbrq_base == NULL) { hprintk("failed to allocate rbrq\n"); - return -ENOMEM; + goto out_free_rbpl_virt; } memset(he_dev->rbrq_base, 0, CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq)); @@ -894,7 +902,7 @@ he_init_group(struct he_dev *he_dev, int group) CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq), &he_dev->tbrq_phys); if (he_dev->tbrq_base == NULL) { hprintk("failed to allocate tbrq\n"); - return -ENOMEM; + goto out_free_rbpq_base; } memset(he_dev->tbrq_base, 0, CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq)); @@ -906,6 +914,39 @@ he_init_group(struct he_dev *he_dev, int group) he_writel(he_dev, CONFIG_TBRQ_THRESH, G0_TBRQ_THRESH + (group * 16)); return 0; + +out_free_rbpq_base: + pci_free_consistent(he_dev->pci_dev, CONFIG_RBRQ_SIZE * + sizeof(struct he_rbrq), he_dev->rbrq_base, + he_dev->rbrq_phys); + i = CONFIG_RBPL_SIZE; +out_free_rbpl_virt: + while (--i) + pci_pool_free(he_dev->rbps_pool, he_dev->rbpl_virt[i].virt, + he_dev->rbps_base[i].phys); + kfree(he_dev->rbpl_virt); + +out_free_rbpl_base: + pci_free_consistent(he_dev->pci_dev, CONFIG_RBPL_SIZE * + sizeof(struct he_rbp), he_dev->rbpl_base, + he_dev->rbpl_phys); +out_destroy_rbpl_pool: + pci_pool_destroy(he_dev->rbpl_pool); + + i = CONFIG_RBPL_SIZE; +out_free_rbps_virt: + while (--i) + pci_pool_free(he_dev->rbpl_pool, he_dev->rbps_virt[i].virt, + he_dev->rbpl_base[i].phys); + kfree(he_dev->rbps_virt); + +out_free_rbps_base: + pci_free_consistent(he_dev->pci_dev, CONFIG_RBPS_SIZE * + sizeof(struct he_rbp), he_dev->rbps_base, + he_dev->rbps_phys); +out_destroy_rbps_pool: + pci_pool_destroy(he_dev->rbps_pool); + return -ENOMEM; } static int __devinit diff --git a/drivers/atm/solos-attrlist.c b/drivers/atm/solos-attrlist.c index efa2808dd94..1a9332e4efe 100644 --- a/drivers/atm/solos-attrlist.c +++ b/drivers/atm/solos-attrlist.c @@ -25,6 +25,10 @@ SOLOS_ATTR_RO(RSCorrectedErrorsUp) SOLOS_ATTR_RO(RSUnCorrectedErrorsUp) SOLOS_ATTR_RO(InterleaveRDn) SOLOS_ATTR_RO(InterleaveRUp) +SOLOS_ATTR_RO(BisRDn) +SOLOS_ATTR_RO(BisRUp) +SOLOS_ATTR_RO(INPdown) +SOLOS_ATTR_RO(INPup) SOLOS_ATTR_RO(ShowtimeStart) SOLOS_ATTR_RO(ATURVendor) SOLOS_ATTR_RO(ATUCCountry) @@ -62,6 +66,13 @@ SOLOS_ATTR_RW(Defaults) SOLOS_ATTR_RW(LineMode) SOLOS_ATTR_RW(Profile) SOLOS_ATTR_RW(DetectNoise) +SOLOS_ATTR_RW(BisAForceSNRMarginDn) +SOLOS_ATTR_RW(BisMForceSNRMarginDn) +SOLOS_ATTR_RW(BisAMaxMargin) +SOLOS_ATTR_RW(BisMMaxMargin) +SOLOS_ATTR_RW(AnnexAForceSNRMarginDn) +SOLOS_ATTR_RW(AnnexAMaxMargin) +SOLOS_ATTR_RW(AnnexMMaxMargin) SOLOS_ATTR_RO(SupportedAnnexes) SOLOS_ATTR_RO(Status) SOLOS_ATTR_RO(TotalStart) diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c index 307321b32cb..c5f5186d62a 100644 --- a/drivers/atm/solos-pci.c +++ b/drivers/atm/solos-pci.c @@ -59,21 +59,29 @@ #define RX_DMA_ADDR(port) (0x30 + (4 * (port))) #define DATA_RAM_SIZE 32768 -#define BUF_SIZE 4096 +#define BUF_SIZE 2048 +#define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/ #define FPGA_PAGE 528 /* FPGA flash page size*/ #define SOLOS_PAGE 512 /* Solos flash page size*/ #define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/ #define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/ -#define RX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2) -#define TX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2 + BUF_SIZE) +#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2) +#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size)) +#define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2) #define RX_DMA_SIZE 2048 +#define FPGA_VERSION(a,b) (((a) << 8) + (b)) +#define LEGACY_BUFFERS 2 +#define DMA_SUPPORTED 4 + static int reset = 0; static int atmdebug = 0; static int firmware_upgrade = 0; static int fpga_upgrade = 0; +static int db_firmware_upgrade = 0; +static int db_fpga_upgrade = 0; struct pkt_hdr { __le16 size; @@ -116,6 +124,8 @@ struct solos_card { wait_queue_head_t param_wq; wait_queue_head_t fw_wq; int using_dma; + int fpga_version; + int buffer_size; }; @@ -136,10 +146,14 @@ MODULE_PARM_DESC(reset, "Reset Solos chips on startup"); MODULE_PARM_DESC(atmdebug, "Print ATM data"); MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade"); MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade"); +MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade"); +MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade"); module_param(reset, int, 0444); module_param(atmdebug, int, 0644); module_param(firmware_upgrade, int, 0444); module_param(fpga_upgrade, int, 0444); +module_param(db_firmware_upgrade, int, 0444); +module_param(db_fpga_upgrade, int, 0444); static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb, struct atm_vcc *vcc); @@ -517,10 +531,32 @@ static int flash_upgrade(struct solos_card *card, int chip) if (chip == 0) { fw_name = "solos-FPGA.bin"; blocksize = FPGA_BLOCK; - } else { + } + + if (chip == 1) { fw_name = "solos-Firmware.bin"; blocksize = SOLOS_BLOCK; } + + if (chip == 2){ + if (card->fpga_version > LEGACY_BUFFERS){ + fw_name = "solos-db-FPGA.bin"; + blocksize = FPGA_BLOCK; + } else { + dev_info(&card->dev->dev, "FPGA version doesn't support daughter board upgrades\n"); + return -EPERM; + } + } + + if (chip == 3){ + if (card->fpga_version > LEGACY_BUFFERS){ + fw_name = "solos-Firmware.bin"; + blocksize = SOLOS_BLOCK; + } else { + dev_info(&card->dev->dev, "FPGA version doesn't support daughter board upgrades\n"); + return -EPERM; + } + } if (request_firmware(&fw, fw_name, &card->dev->dev)) return -ENOENT; @@ -536,8 +572,10 @@ static int flash_upgrade(struct solos_card *card, int chip) data32 = ioread32(card->config_regs + FPGA_MODE); /* Set mode to Chip Erase */ - dev_info(&card->dev->dev, "Set FPGA Flash mode to %s Chip Erase\n", - chip?"Solos":"FPGA"); + if(chip == 0 || chip == 2) + dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n"); + if(chip == 1 || chip == 3) + dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n"); iowrite32((chip * 2), card->config_regs + FLASH_MODE); @@ -557,7 +595,10 @@ static int flash_upgrade(struct solos_card *card, int chip) /* Copy block to buffer, swapping each 16 bits */ for(i = 0; i < blocksize; i += 4) { uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i)); - iowrite32(word, RX_BUF(card, 3) + i); + if(card->fpga_version > LEGACY_BUFFERS) + iowrite32(word, FLASH_BUF + i); + else + iowrite32(word, RX_BUF(card, 3) + i); } /* Specify block number and then trigger flash write */ @@ -630,6 +671,10 @@ void solos_bh(unsigned long card_arg) memcpy_fromio(header, RX_BUF(card, port), sizeof(*header)); size = le16_to_cpu(header->size); + if (size > (card->buffer_size - sizeof(*header))){ + dev_warn(&card->dev->dev, "Invalid buffer size\n"); + continue; + } skb = alloc_skb(size + 1, GFP_ATOMIC); if (!skb) { @@ -1094,12 +1139,18 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id) fpga_ver = (data32 & 0x0000FFFF); major_ver = ((data32 & 0xFF000000) >> 24); minor_ver = ((data32 & 0x00FF0000) >> 16); + card->fpga_version = FPGA_VERSION(major_ver,minor_ver); + if (card->fpga_version > LEGACY_BUFFERS) + card->buffer_size = BUF_SIZE; + else + card->buffer_size = OLD_BUF_SIZE; dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n", major_ver, minor_ver, fpga_ver); - if (0 && fpga_ver > 27) + if (card->fpga_version >= DMA_SUPPORTED){ card->using_dma = 1; - else { + } else { + card->using_dma = 0; /* Set RX empty flag for all ports */ iowrite32(0xF0, card->config_regs + FLAGS_ADDR); } @@ -1131,6 +1182,12 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id) if (firmware_upgrade) flash_upgrade(card, 1); + if (db_fpga_upgrade) + flash_upgrade(card, 2); + + if (db_firmware_upgrade) + flash_upgrade(card, 3); + err = atm_init(card); if (err) goto out_free_irq; diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 7adff4d0960..b9eeadf01b7 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -813,10 +813,10 @@ static int vortex_suspend(struct pci_dev *pdev, pm_message_t state) if (netif_running(dev)) { netif_device_detach(dev); vortex_down(dev, 1); + disable_irq(dev->irq); } pci_save_state(pdev); pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); - free_irq(dev->irq, dev); pci_disable_device(pdev); pci_set_power_state(pdev, pci_choose_state(pdev, state)); } @@ -839,18 +839,12 @@ static int vortex_resume(struct pci_dev *pdev) return err; } pci_set_master(pdev); - if (request_irq(dev->irq, vp->full_bus_master_rx ? - &boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev)) { - pr_warning("%s: Could not reserve IRQ %d\n", dev->name, dev->irq); - pci_disable_device(pdev); - return -EBUSY; - } if (netif_running(dev)) { err = vortex_up(dev); if (err) return err; - else - netif_device_attach(dev); + enable_irq(dev->irq); + netif_device_attach(dev); } } return 0; diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 462d9f59c53..83a1922e68e 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -87,7 +87,7 @@ /* These identify the driver base version and may not be removed. */ static char version[] = -KERN_INFO DRV_NAME ": 10/100 PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")\n"; +DRV_NAME ": 10/100 PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")\n"; MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>"); MODULE_DESCRIPTION("RealTek RTL-8139C+ series 10/100 PCI Ethernet driver"); diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ed5741b2e70..2bea67c134f 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1875,7 +1875,7 @@ config 68360_ENET config FEC bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" - depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35 + depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35 || ARCH_MX25 help Say Y here if you want to use the built-in 10/100 Fast ethernet controller on some Motorola ColdFire and Freescale i.MX processors. diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c index be2c6cfe6e8..1372e9a99f5 100644 --- a/drivers/net/atl1c/atl1c_main.c +++ b/drivers/net/atl1c/atl1c_main.c @@ -2296,7 +2296,7 @@ static int atl1c_suspend(struct pci_dev *pdev, pm_message_t state) u32 ctrl; u32 mac_ctrl_data; u32 master_ctrl_data; - u32 wol_ctrl_data; + u32 wol_ctrl_data = 0; u16 mii_bmsr_data; u16 save_autoneg_advertised; u16 mii_intr_status_data; diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 09007437246..df32c109b7a 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -75,6 +75,13 @@ config CAN_EMS_PCI CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). +config CAN_EMS_USB + tristate "EMS CPC-USB/ARM7 CAN/USB interface" + depends on USB && CAN_DEV + ---help--- + This driver is for the one channel CPC-USB/ARM7 CAN/USB interface + from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). + config CAN_KVASER_PCI tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" depends on PCI && CAN_SJA1000 @@ -82,6 +89,12 @@ config CAN_KVASER_PCI This driver is for the the PCIcanx and PCIcan cards (1, 2 or 4 channel) from Kvaser (http://www.kvaser.com). +config CAN_AT91 + tristate "Atmel AT91 onchip CAN controller" + depends on CAN && CAN_DEV && ARCH_AT91SAM9263 + ---help--- + This is a driver for the SoC CAN controller in Atmel's AT91SAM9263. + config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" depends on CAN diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile index 523a941b358..0dea62721f2 100644 --- a/drivers/net/can/Makefile +++ b/drivers/net/can/Makefile @@ -7,6 +7,9 @@ obj-$(CONFIG_CAN_VCAN) += vcan.o obj-$(CONFIG_CAN_DEV) += can-dev.o can-dev-y := dev.o +obj-y += usb/ + obj-$(CONFIG_CAN_SJA1000) += sja1000/ +obj-$(CONFIG_CAN_AT91) += at91_can.o ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c index 7d84b8ac9c1..fd04789d337 100644 --- a/drivers/net/can/sja1000/ems_pci.c +++ b/drivers/net/can/sja1000/ems_pci.c @@ -94,12 +94,14 @@ struct ems_pci_card { #define EMS_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK) #define EMS_PCI_V1_BASE_BAR 1 -#define EMS_PCI_V1_MEM_SIZE 4096 +#define EMS_PCI_V1_CONF_SIZE 4096 /* size of PITA control area */ #define EMS_PCI_V2_BASE_BAR 2 -#define EMS_PCI_V2_MEM_SIZE 128 +#define EMS_PCI_V2_CONF_SIZE 128 /* size of PLX control area */ #define EMS_PCI_CAN_BASE_OFFSET 0x400 /* offset where the controllers starts */ #define EMS_PCI_CAN_CTRL_SIZE 0x200 /* memory size for each controller */ +#define EMS_PCI_BASE_SIZE 4096 /* size of controller area */ + static struct pci_device_id ems_pci_tbl[] = { /* CPC-PCI v1 */ {PCI_VENDOR_ID_SIEMENS, 0x2104, PCI_ANY_ID, PCI_ANY_ID,}, @@ -224,7 +226,7 @@ static int __devinit ems_pci_add_card(struct pci_dev *pdev, struct sja1000_priv *priv; struct net_device *dev; struct ems_pci_card *card; - int max_chan, mem_size, base_bar; + int max_chan, conf_size, base_bar; int err, i; /* Enabling PCI device */ @@ -251,22 +253,22 @@ static int __devinit ems_pci_add_card(struct pci_dev *pdev, card->version = 2; /* CPC-PCI v2 */ max_chan = EMS_PCI_V2_MAX_CHAN; base_bar = EMS_PCI_V2_BASE_BAR; - mem_size = EMS_PCI_V2_MEM_SIZE; + conf_size = EMS_PCI_V2_CONF_SIZE; } else { card->version = 1; /* CPC-PCI v1 */ max_chan = EMS_PCI_V1_MAX_CHAN; base_bar = EMS_PCI_V1_BASE_BAR; - mem_size = EMS_PCI_V1_MEM_SIZE; + conf_size = EMS_PCI_V1_CONF_SIZE; } /* Remap configuration space and controller memory area */ - card->conf_addr = pci_iomap(pdev, 0, mem_size); + card->conf_addr = pci_iomap(pdev, 0, conf_size); if (card->conf_addr == NULL) { err = -ENOMEM; goto failure_cleanup; } - card->base_addr = pci_iomap(pdev, base_bar, mem_size); + card->base_addr = pci_iomap(pdev, base_bar, EMS_PCI_BASE_SIZE); if (card->base_addr == NULL) { err = -ENOMEM; goto failure_cleanup; diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile new file mode 100644 index 00000000000..c3f75ba701b --- /dev/null +++ b/drivers/net/can/usb/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Linux Controller Area Network USB drivers. +# + +obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c new file mode 100644 index 00000000000..9012e0abc62 --- /dev/null +++ b/drivers/net/can/usb/ems_usb.c @@ -0,0 +1,1155 @@ +/* + * CAN driver for EMS Dr. Thomas Wuensche CPC-USB/ARM7 + * + * Copyright (C) 2004-2009 EMS Dr. Thomas Wuensche + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published + * by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#include <linux/init.h> +#include <linux/signal.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/usb.h> + +#include <linux/can.h> +#include <linux/can/dev.h> +#include <linux/can/error.h> + +MODULE_AUTHOR("Sebastian Haas <haas@ems-wuensche.com>"); +MODULE_DESCRIPTION("CAN driver for EMS Dr. Thomas Wuensche CAN/USB interfaces"); +MODULE_LICENSE("GPL v2"); + +/* Control-Values for CPC_Control() Command Subject Selection */ +#define CONTR_CAN_MESSAGE 0x04 +#define CONTR_CAN_STATE 0x0C +#define CONTR_BUS_ERROR 0x1C + +/* Control Command Actions */ +#define CONTR_CONT_OFF 0 +#define CONTR_CONT_ON 1 +#define CONTR_ONCE 2 + +/* Messages from CPC to PC */ +#define CPC_MSG_TYPE_CAN_FRAME 1 /* CAN data frame */ +#define CPC_MSG_TYPE_RTR_FRAME 8 /* CAN remote frame */ +#define CPC_MSG_TYPE_CAN_PARAMS 12 /* Actual CAN parameters */ +#define CPC_MSG_TYPE_CAN_STATE 14 /* CAN state message */ +#define CPC_MSG_TYPE_EXT_CAN_FRAME 16 /* Extended CAN data frame */ +#define CPC_MSG_TYPE_EXT_RTR_FRAME 17 /* Extended remote frame */ +#define CPC_MSG_TYPE_CONTROL 19 /* change interface behavior */ +#define CPC_MSG_TYPE_CONFIRM 20 /* command processed confirmation */ +#define CPC_MSG_TYPE_OVERRUN 21 /* overrun events */ +#define CPC_MSG_TYPE_CAN_FRAME_ERROR 23 /* detected bus errors */ +#define CPC_MSG_TYPE_ERR_COUNTER 25 /* RX/TX error counter */ + +/* Messages from the PC to the CPC interface */ +#define CPC_CMD_TYPE_CAN_FRAME 1 /* CAN data frame */ +#define CPC_CMD_TYPE_CONTROL 3 /* control of interface behavior */ +#define CPC_CMD_TYPE_CAN_PARAMS 6 /* set CAN parameters */ +#define CPC_CMD_TYPE_RTR_FRAME 13 /* CAN remote frame */ +#define CPC_CMD_TYPE_CAN_STATE 14 /* CAN state message */ +#define CPC_CMD_TYPE_EXT_CAN_FRAME 15 /* Extended CAN data frame */ +#define CPC_CMD_TYPE_EXT_RTR_FRAME 16 /* Extended CAN remote frame */ +#define CPC_CMD_TYPE_CAN_EXIT 200 /* exit the CAN */ + +#define CPC_CMD_TYPE_INQ_ERR_COUNTER 25 /* request the CAN error counters */ +#define CPC_CMD_TYPE_CLEAR_MSG_QUEUE 8 /* clear CPC_MSG queue */ +#define CPC_CMD_TYPE_CLEAR_CMD_QUEUE 28 /* clear CPC_CMD queue */ + +#define CPC_CC_TYPE_SJA1000 2 /* Philips basic CAN controller */ + +#define CPC_CAN_ECODE_ERRFRAME 0x01 /* Ecode type */ + +/* Overrun types */ +#define CPC_OVR_EVENT_CAN 0x01 +#define CPC_OVR_EVENT_CANSTATE 0x02 +#define CPC_OVR_EVENT_BUSERROR 0x04 + +/* + * If the CAN controller lost a message we indicate it with the highest bit + * set in the count field. + */ +#define CPC_OVR_HW 0x80 + +/* Size of the "struct ems_cpc_msg" without the union */ +#define CPC_MSG_HEADER_LEN 11 +#define CPC_CAN_MSG_MIN_SIZE 5 + +/* Define these values to match your devices */ +#define USB_CPCUSB_VENDOR_ID 0x12D6 + +#define USB_CPCUSB_ARM7_PRODUCT_ID 0x0444 + +/* Mode register NXP LPC2119/SJA1000 CAN Controller */ +#define SJA1000_MOD_NORMAL 0x00 +#define SJA1000_MOD_RM 0x01 + +/* ECC register NXP LPC2119/SJA1000 CAN Controller */ +#define SJA1000_ECC_SEG 0x1F +#define SJA1000_ECC_DIR 0x20 +#define SJA1000_ECC_ERR 0x06 +#define SJA1000_ECC_BIT 0x00 +#define SJA1000_ECC_FORM 0x40 +#define SJA1000_ECC_STUFF 0x80 +#define SJA1000_ECC_MASK 0xc0 + +/* Status register content */ +#define SJA1000_SR_BS 0x80 +#define SJA1000_SR_ES 0x40 + +#define SJA1000_DEFAULT_OUTPUT_CONTROL 0xDA + +/* + * The device actually uses a 16MHz clock to generate the CAN clock + * but it expects SJA1000 bit settings based on 8MHz (is internally + * converted). + */ +#define EMS_USB_ARM7_CLOCK 8000000 + +/* + * CAN-Message representation in a CPC_MSG. Message object type is + * CPC_MSG_TYPE_CAN_FRAME or CPC_MSG_TYPE_RTR_FRAME or + * CPC_MSG_TYPE_EXT_CAN_FRAME or CPC_MSG_TYPE_EXT_RTR_FRAME. + */ +struct cpc_can_msg { + u32 id; + u8 length; + u8 msg[8]; +}; + +/* Representation of the CAN parameters for the SJA1000 controller */ +struct cpc_sja1000_params { + u8 mode; + u8 acc_code0; + u8 acc_code1; + u8 acc_code2; + u8 acc_code3; + u8 acc_mask0; + u8 acc_mask1; + u8 acc_mask2; + u8 acc_mask3; + u8 btr0; + u8 btr1; + u8 outp_contr; +}; + +/* CAN params message representation */ +struct cpc_can_params { + u8 cc_type; + + /* Will support M16C CAN controller in the future */ + union { + struct cpc_sja1000_params sja1000; + } cc_params; +}; + +/* Structure for confirmed message handling */ +struct cpc_confirm { + u8 error; /* error code */ +}; + +/* Structure for overrun conditions */ +struct cpc_overrun { + u8 event; + u8 count; +}; + +/* SJA1000 CAN errors (compatible to NXP LPC2119) */ +struct cpc_sja1000_can_error { + u8 ecc; + u8 rxerr; + u8 txerr; +}; + +/* structure for CAN error conditions */ +struct cpc_can_error { + u8 ecode; + + struct { + u8 cc_type; + + /* Other controllers may also provide error code capture regs */ + union { + struct cpc_sja1000_can_error sja1000; + } regs; + } cc; +}; + +/* + * Structure containing RX/TX error counter. This structure is used to request + * the values of the CAN controllers TX and RX error counter. + */ +struct cpc_can_err_counter { + u8 rx; + u8 tx; +}; + +/* Main message type used between library and application */ +struct __attribute__ ((packed)) ems_cpc_msg { + u8 type; /* type of message */ + u8 length; /* length of data within union 'msg' */ + u8 msgid; /* confirmation handle */ + u32 ts_sec; /* timestamp in seconds */ + u32 ts_nsec; /* timestamp in nano seconds */ + + union { + u8 generic[64]; + struct cpc_can_msg can_msg; + struct cpc_can_params can_params; + struct cpc_confirm confirmation; + struct cpc_overrun overrun; + struct cpc_can_error error; + struct cpc_can_err_counter err_counter; + u8 can_state; + } msg; +}; + +/* + * Table of devices that work with this driver + * NOTE: This driver supports only CPC-USB/ARM7 (LPC2119) yet. + */ +static struct usb_device_id ems_usb_table[] = { + {USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_ARM7_PRODUCT_ID)}, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, ems_usb_table); + +#define RX_BUFFER_SIZE 64 +#define CPC_HEADER_SIZE 4 +#define INTR_IN_BUFFER_SIZE 4 + +#define MAX_RX_URBS 10 +#define MAX_TX_URBS CAN_ECHO_SKB_MAX + +struct ems_usb; + +struct ems_tx_urb_context { + struct ems_usb *dev; + + u32 echo_index; + u8 dlc; +}; + +struct ems_usb { + struct can_priv can; /* must be the first member */ + int open_time; + + struct sk_buff *echo_skb[MAX_TX_URBS]; + + struct usb_device *udev; + struct net_device *netdev; + + atomic_t active_tx_urbs; + struct usb_anchor tx_submitted; + struct ems_tx_urb_context tx_contexts[MAX_TX_URBS]; + + struct usb_anchor rx_submitted; + + struct urb *intr_urb; + + u8 *tx_msg_buffer; + + u8 *intr_in_buffer; + unsigned int free_slots; /* remember number of available slots */ + + struct ems_cpc_msg active_params; /* active controller parameters */ +}; + +static void ems_usb_read_interrupt_callback(struct urb *urb) +{ + struct ems_usb *dev = urb->context; + struct net_device *netdev = dev->netdev; + int err; + + if (!netif_device_present(netdev)) + return; + + switch (urb->status) { + case 0: + dev->free_slots = dev->intr_in_buffer[1]; + break; + + case -ECONNRESET: /* unlink */ + case -ENOENT: + case -ESHUTDOWN: + return; + + default: + dev_info(netdev->dev.parent, "Rx interrupt aborted %d\n", + urb->status); + break; + } + + err = usb_submit_urb(urb, GFP_ATOMIC); + + if (err == -ENODEV) + netif_device_detach(netdev); + else if (err) + dev_err(netdev->dev.parent, + "failed resubmitting intr urb: %d\n", err); + + return; +} + +static void ems_usb_rx_can_msg(struct ems_usb *dev, struct ems_cpc_msg *msg) +{ + struct can_frame *cf; + struct sk_buff *skb; + int i; + struct net_device_stats *stats = &dev->netdev->stats; + + skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame)); + if (skb == NULL) + return; + + skb->protocol = htons(ETH_P_CAN); + + cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); + + cf->can_id = msg->msg.can_msg.id; + cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8); + + if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME + || msg->type == CPC_MSG_TYPE_EXT_RTR_FRAME) + cf->can_id |= CAN_EFF_FLAG; + + if (msg->type == CPC_MSG_TYPE_RTR_FRAME + || msg->type == CPC_MSG_TYPE_EXT_RTR_FRAME) { + cf->can_id |= CAN_RTR_FLAG; + } else { + for (i = 0; i < cf->can_dlc; i++) + cf->data[i] = msg->msg.can_msg.msg[i]; + } + + netif_rx(skb); + + stats->rx_packets++; + stats->rx_bytes += cf->can_dlc; +} + +static void ems_usb_rx_err(struct ems_usb *dev, struct ems_cpc_msg *msg) +{ + struct can_frame *cf; + struct sk_buff *skb; + struct net_device_stats *stats = &dev->netdev->stats; + + skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame)); + if (skb == NULL) + return; + + skb->protocol = htons(ETH_P_CAN); + + cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); + memset(cf, 0, sizeof(struct can_frame)); + + cf->can_id = CAN_ERR_FLAG; + cf->can_dlc = CAN_ERR_DLC; + + if (msg->type == CPC_MSG_TYPE_CAN_STATE) { + u8 state = msg->msg.can_state; + + if (state & SJA1000_SR_BS) { + dev->can.state = CAN_STATE_BUS_OFF; + cf->can_id |= CAN_ERR_BUSOFF; + + can_bus_off(dev->netdev); + } else if (state & SJA1000_SR_ES) { + dev->can.state = CAN_STATE_ERROR_WARNING; + dev->can.can_stats.error_warning++; + } else { + dev->can.state = CAN_STATE_ERROR_ACTIVE; + dev->can.can_stats.error_passive++; + } + } else if (msg->type == CPC_MSG_TYPE_CAN_FRAME_ERROR) { + u8 ecc = msg->msg.error.cc.regs.sja1000.ecc; + u8 txerr = msg->msg.error.cc.regs.sja1000.txerr; + u8 rxerr = msg->msg.error.cc.regs.sja1000.rxerr; + + /* bus error interrupt */ + dev->can.can_stats.bus_error++; + stats->rx_errors++; + + cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; + + switch (ecc & SJA1000_ECC_MASK) { + case SJA1000_ECC_BIT: + cf->data[2] |= CAN_ERR_PROT_BIT; + break; + case SJA1000_ECC_FORM: + cf->data[2] |= CAN_ERR_PROT_FORM; + break; + case SJA1000_ECC_STUFF: + cf->data[2] |= CAN_ERR_PROT_STUFF; + break; + default: + cf->data[2] |= CAN_ERR_PROT_UNSPEC; + cf->data[3] = ecc & SJA1000_ECC_SEG; + break; + } + + /* Error occured during transmission? */ + if ((ecc & SJA1000_ECC_DIR) == 0) + cf->data[2] |= CAN_ERR_PROT_TX; + + if (dev->can.state == CAN_STATE_ERROR_WARNING || + dev->can.state == CAN_STATE_ERROR_PASSIVE) { + cf->data[1] = (txerr > rxerr) ? + CAN_ERR_CRTL_TX_PASSIVE : CAN_ERR_CRTL_RX_PASSIVE; + } + } else if (msg->type == CPC_MSG_TYPE_OVERRUN) { + cf->can_id |= CAN_ERR_CRTL; + cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; + + stats->rx_over_errors++; + stats->rx_errors++; + } + + netif_rx(skb); + + stats->rx_packets++; + stats->rx_bytes += cf->can_dlc; +} + +/* + * callback for bulk IN urb + */ +static void ems_usb_read_bulk_callback(struct urb *urb) +{ + struct ems_usb *dev = urb->context; + struct net_device *netdev; + int retval; + + netdev = dev->netdev; + + if (!netif_device_present(netdev)) + return; + + switch (urb->status) { + case 0: /* success */ + break; + + case -ENOENT: + return; + + default: + dev_info(netdev->dev.parent, "Rx URB aborted (%d)\n", + urb->status); + goto resubmit_urb; + } + + if (urb->actual_length > CPC_HEADER_SIZE) { + struct ems_cpc_msg *msg; + u8 *ibuf = urb->transfer_buffer; + u8 msg_count, again, start; + + msg_count = ibuf[0] & ~0x80; + again = ibuf[0] & 0x80; + + start = CPC_HEADER_SIZE; + + while (msg_count) { + msg = (struct ems_cpc_msg *)&ibuf[start]; + + switch (msg->type) { + case CPC_MSG_TYPE_CAN_STATE: + /* Process CAN state changes */ + ems_usb_rx_err(dev, msg); + break; + + case CPC_MSG_TYPE_CAN_FRAME: + case CPC_MSG_TYPE_EXT_CAN_FRAME: + case CPC_MSG_TYPE_RTR_FRAME: + case CPC_MSG_TYPE_EXT_RTR_FRAME: + ems_usb_rx_can_msg(dev, msg); + break; + + case CPC_MSG_TYPE_CAN_FRAME_ERROR: + /* Process errorframe */ + ems_usb_rx_err(dev, msg); + break; + + case CPC_MSG_TYPE_OVERRUN: + /* Message lost while receiving */ + ems_usb_rx_err(dev, msg); + break; + } + + start += CPC_MSG_HEADER_LEN + msg->length; + msg_count--; + + if (start > urb->transfer_buffer_length) { + dev_err(netdev->dev.parent, "format error\n"); + break; + } + } + } + +resubmit_urb: + usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 2), + urb->transfer_buffer, RX_BUFFER_SIZE, + ems_usb_read_bulk_callback, dev); + + retval = usb_submit_urb(urb, GFP_ATOMIC); + + if (retval == -ENODEV) + netif_device_detach(netdev); + else if (retval) + dev_err(netdev->dev.parent, + "failed resubmitting read bulk urb: %d\n", retval); + + return; +} + +/* + * callback for bulk IN urb + */ +static void ems_usb_write_bulk_callback(struct urb *urb) +{ + struct ems_tx_urb_context *context = urb->context; + struct ems_usb *dev; + struct net_device *netdev; + + BUG_ON(!context); + + dev = context->dev; + netdev = dev->netdev; + + /* free up our allocated buffer */ + usb_buffer_free(urb->dev, urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma); + + atomic_dec(&dev->active_tx_urbs); + + if (!netif_device_present(netdev)) + return; + + if (urb->status) + dev_info(netdev->dev.parent, "Tx URB aborted (%d)\n", + urb->status); + + netdev->trans_start = jiffies; + + /* transmission complete interrupt */ + netdev->stats.tx_packets++; + netdev->stats.tx_bytes += context->dlc; + + can_get_echo_skb(netdev, context->echo_index); + + /* Release context */ + context->echo_index = MAX_TX_URBS; + + if (netif_queue_stopped(netdev)) + netif_wake_queue(netdev); +} + +/* + * Send the given CPC command synchronously + */ +static int ems_usb_command_msg(struct ems_usb *dev, struct ems_cpc_msg *msg) +{ + int actual_length; + + /* Copy payload */ + memcpy(&dev->tx_msg_buffer[CPC_HEADER_SIZE], msg, + msg->length + CPC_MSG_HEADER_LEN); + + /* Clear header */ + memset(&dev->tx_msg_buffer[0], 0, CPC_HEADER_SIZE); + + return usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 2), + &dev->tx_msg_buffer[0], + msg->length + CPC_MSG_HEADER_LEN + CPC_HEADER_SIZE, + &actual_length, 1000); +} + +/* + * Change CAN controllers' mode register + */ +static int ems_usb_write_mode(struct ems_usb *dev, u8 mode) +{ + dev->active_params.msg.can_params.cc_params.sja1000.mode = mode; + + return ems_usb_command_msg(dev, &dev->active_params); +} + +/* + * Send a CPC_Control command to change behaviour when interface receives a CAN + * message, bus error or CAN state changed notifications. + */ +static int ems_usb_control_cmd(struct ems_usb *dev, u8 val) +{ + struct ems_cpc_msg cmd; + + cmd.type = CPC_CMD_TYPE_CONTROL; + cmd.length = CPC_MSG_HEADER_LEN + 1; + + cmd.msgid = 0; + + cmd.msg.generic[0] = val; + + return ems_usb_command_msg(dev, &cmd); +} + +/* + * Start interface + */ +static int ems_usb_start(struct ems_usb *dev) +{ + struct net_device *netdev = dev->netdev; + int err, i; + + dev->intr_in_buffer[0] = 0; + dev->free_slots = 15; /* initial size */ + + for (i = 0; i < MAX_RX_URBS; i++) { + struct urb *urb = NULL; + u8 *buf = NULL; + + /* create a URB, and a buffer for it */ + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + dev_err(netdev->dev.parent, + "No memory left for URBs\n"); + return -ENOMEM; + } + + buf = usb_buffer_alloc(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL, + &urb->transfer_dma); + if (!buf) { + dev_err(netdev->dev.parent, + "No memory left for USB buffer\n"); + usb_free_urb(urb); + return -ENOMEM; + } + + usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 2), + buf, RX_BUFFER_SIZE, + ems_usb_read_bulk_callback, dev); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + usb_anchor_urb(urb, &dev->rx_submitted); + + err = usb_submit_urb(urb, GFP_KERNEL); + if (err) { + if (err == -ENODEV) + netif_device_detach(dev->netdev); + + usb_unanchor_urb(urb); + usb_buffer_free(dev->udev, RX_BUFFER_SIZE, buf, + urb->transfer_dma); + break; + } + + /* Drop reference, USB core will take care of freeing it */ + usb_free_urb(urb); + } + + /* Did we submit any URBs */ + if (i == 0) { + dev_warn(netdev->dev.parent, "couldn't setup read URBs\n"); + return err; + } + + /* Warn if we've couldn't transmit all the URBs */ + if (i < MAX_RX_URBS) + dev_warn(netdev->dev.parent, "rx performance may be slow\n"); + + /* Setup and start interrupt URB */ + usb_fill_int_urb(dev->intr_urb, dev->udev, + usb_rcvintpipe(dev->udev, 1), + dev->intr_in_buffer, + INTR_IN_BUFFER_SIZE, + ems_usb_read_interrupt_callback, dev, 1); + + err = usb_submit_urb(dev->intr_urb, GFP_KERNEL); + if (err) { + if (err == -ENODEV) + netif_device_detach(dev->netdev); + + dev_warn(netdev->dev.parent, "intr URB submit failed: %d\n", + err); + + return err; + } + + /* CPC-USB will transfer received message to host */ + err = ems_usb_control_cmd(dev, CONTR_CAN_MESSAGE | CONTR_CONT_ON); + if (err) + goto failed; + + /* CPC-USB will transfer CAN state changes to host */ + err = ems_usb_control_cmd(dev, CONTR_CAN_STATE | CONTR_CONT_ON); + if (err) + goto failed; + + /* CPC-USB will transfer bus errors to host */ + err = ems_usb_control_cmd(dev, CONTR_BUS_ERROR | CONTR_CONT_ON); + if (err) + goto failed; + + err = ems_usb_write_mode(dev, SJA1000_MOD_NORMAL); + if (err) + goto failed; + + dev->can.state = CAN_STATE_ERROR_ACTIVE; + + return 0; + +failed: + if (err == -ENODEV) + netif_device_detach(dev->netdev); + + dev_warn(netdev->dev.parent, "couldn't submit control: %d\n", err); + + return err; +} + +static void unlink_all_urbs(struct ems_usb *dev) +{ + int i; + + usb_unlink_urb(dev->intr_urb); + + usb_kill_anchored_urbs(&dev->rx_submitted); + + usb_kill_anchored_urbs(&dev->tx_submitted); + atomic_set(&dev->active_tx_urbs, 0); + + for (i = 0; i < MAX_TX_URBS; i++) + dev->tx_contexts[i].echo_index = MAX_TX_URBS; +} + +static int ems_usb_open(struct net_device *netdev) +{ + struct ems_usb *dev = netdev_priv(netdev); + int err; + + err = ems_usb_write_mode(dev, SJA1000_MOD_RM); + if (err) + return err; + + /* common open */ + err = open_candev(netdev); + if (err) + return err; + + /* finally start device */ + err = ems_usb_start(dev); + if (err) { + if (err == -ENODEV) + netif_device_detach(dev->netdev); + + dev_warn(netdev->dev.parent, "couldn't start device: %d\n", + err); + + close_candev(netdev); + + return err; + } + + dev->open_time = jiffies; + + netif_start_queue(netdev); + + return 0; +} + +static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *netdev) +{ + struct ems_usb *dev = netdev_priv(netdev); + struct ems_tx_urb_context *context = NULL; + struct net_device_stats *stats = &netdev->stats; + struct can_frame *cf = (struct can_frame *)skb->data; + struct ems_cpc_msg *msg; + struct urb *urb; + u8 *buf; + int i, err; + size_t size = CPC_HEADER_SIZE + CPC_MSG_HEADER_LEN + + sizeof(struct cpc_can_msg); + + /* create a URB, and a buffer for it, and copy the data to the URB */ + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + dev_err(netdev->dev.parent, "No memory left for URBs\n"); + goto nomem; + } + + buf = usb_buffer_alloc(dev->udev, size, GFP_ATOMIC, &urb->transfer_dma); + if (!buf) { + dev_err(netdev->dev.parent, "No memory left for USB buffer\n"); + usb_free_urb(urb); + goto nomem; + } + + msg = (struct ems_cpc_msg *)&buf[CPC_HEADER_SIZE]; + + msg->msg.can_msg.id = cf->can_id & CAN_ERR_MASK; + msg->msg.can_msg.length = cf->can_dlc; + + if (cf->can_id & CAN_RTR_FLAG) { + msg->type = cf->can_id & CAN_EFF_FLAG ? + CPC_CMD_TYPE_EXT_RTR_FRAME : CPC_CMD_TYPE_RTR_FRAME; + + msg->length = CPC_CAN_MSG_MIN_SIZE; + } else { + msg->type = cf->can_id & CAN_EFF_FLAG ? + CPC_CMD_TYPE_EXT_CAN_FRAME : CPC_CMD_TYPE_CAN_FRAME; + + for (i = 0; i < cf->can_dlc; i++) + msg->msg.can_msg.msg[i] = cf->data[i]; + + msg->length = CPC_CAN_MSG_MIN_SIZE + cf->can_dlc; + } + + for (i = 0; i < MAX_TX_URBS; i++) { + if (dev->tx_contexts[i].echo_index == MAX_TX_URBS) { + context = &dev->tx_contexts[i]; + break; + } + } + + /* + * May never happen! When this happens we'd more URBs in flight as + * allowed (MAX_TX_URBS). + */ + if (!context) { + usb_unanchor_urb(urb); + usb_buffer_free(dev->udev, size, buf, urb->transfer_dma); + + dev_warn(netdev->dev.parent, "couldn't find free context\n"); + + return NETDEV_TX_BUSY; + } + + context->dev = dev; + context->echo_index = i; + context->dlc = cf->can_dlc; + + usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), buf, + size, ems_usb_write_bulk_callback, context); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + usb_anchor_urb(urb, &dev->tx_submitted); + + can_put_echo_skb(skb, netdev, context->echo_index); + + atomic_inc(&dev->active_tx_urbs); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (unlikely(err)) { + can_free_echo_skb(netdev, context->echo_index); + + usb_unanchor_urb(urb); + usb_buffer_free(dev->udev, size, buf, urb->transfer_dma); + dev_kfree_skb(skb); + + atomic_dec(&dev->active_tx_urbs); + + if (err == -ENODEV) { + netif_device_detach(netdev); + } else { + dev_warn(netdev->dev.parent, "failed tx_urb %d\n", err); + + stats->tx_dropped++; + } + } else { + netdev->trans_start = jiffies; + + /* Slow down tx path */ + if (atomic_read(&dev->active_tx_urbs) >= MAX_TX_URBS || + dev->free_slots < 5) { + netif_stop_queue(netdev); + } + } + + /* + * Release our reference to this URB, the USB core will eventually free + * it entirely. + */ + usb_free_urb(urb); + + return NETDEV_TX_OK; + +nomem: + if (skb) + dev_kfree_skb(skb); + + stats->tx_dropped++; + + return NETDEV_TX_OK; +} + +static int ems_usb_close(struct net_device *netdev) +{ + struct ems_usb *dev = netdev_priv(netdev); + + /* Stop polling */ + unlink_all_urbs(dev); + + netif_stop_queue(netdev); + + /* Set CAN controller to reset mode */ + if (ems_usb_write_mode(dev, SJA1000_MOD_RM)) + dev_warn(netdev->dev.parent, "couldn't stop device"); + + close_candev(netdev); + + dev->open_time = 0; + + return 0; +} + +static const struct net_device_ops ems_usb_netdev_ops = { + .ndo_open = ems_usb_open, + .ndo_stop = ems_usb_close, + .ndo_start_xmit = ems_usb_start_xmit, +}; + +static struct can_bittiming_const ems_usb_bittiming_const = { + .name = "ems_usb", + .tseg1_min = 1, + .tseg1_max = 16, + .tseg2_min = 1, + .tseg2_max = 8, + .sjw_max = 4, + .brp_min = 1, + .brp_max = 64, + .brp_inc = 1, +}; + +static int ems_usb_set_mode(struct net_device *netdev, enum can_mode mode) +{ + struct ems_usb *dev = netdev_priv(netdev); + + if (!dev->open_time) + return -EINVAL; + + switch (mode) { + case CAN_MODE_START: + if (ems_usb_write_mode(dev, SJA1000_MOD_NORMAL)) + dev_warn(netdev->dev.parent, "couldn't start device"); + + if (netif_queue_stopped(netdev)) + netif_wake_queue(netdev); + break; + + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int ems_usb_set_bittiming(struct net_device *netdev) +{ + struct ems_usb *dev = netdev_priv(netdev); + struct can_bittiming *bt = &dev->can.bittiming; + u8 btr0, btr1; + + btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6); + btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) | + (((bt->phase_seg2 - 1) & 0x7) << 4); + if (dev->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) + btr1 |= 0x80; + + dev_info(netdev->dev.parent, "setting BTR0=0x%02x BTR1=0x%02x\n", + btr0, btr1); + + dev->active_params.msg.can_params.cc_params.sja1000.btr0 = btr0; + dev->active_params.msg.can_params.cc_params.sja1000.btr1 = btr1; + + return ems_usb_command_msg(dev, &dev->active_params); +} + +static void init_params_sja1000(struct ems_cpc_msg *msg) +{ + struct cpc_sja1000_params *sja1000 = + &msg->msg.can_params.cc_params.sja1000; + + msg->type = CPC_CMD_TYPE_CAN_PARAMS; + msg->length = sizeof(struct cpc_can_params); + msg->msgid = 0; + + msg->msg.can_params.cc_type = CPC_CC_TYPE_SJA1000; + + /* Acceptance filter open */ + sja1000->acc_code0 = 0x00; + sja1000->acc_code1 = 0x00; + sja1000->acc_code2 = 0x00; + sja1000->acc_code3 = 0x00; + + /* Acceptance filter open */ + sja1000->acc_mask0 = 0xFF; + sja1000->acc_mask1 = 0xFF; + sja1000->acc_mask2 = 0xFF; + sja1000->acc_mask3 = 0xFF; + + sja1000->btr0 = 0; + sja1000->btr1 = 0; + + sja1000->outp_contr = SJA1000_DEFAULT_OUTPUT_CONTROL; + sja1000->mode = SJA1000_MOD_RM; +} + +/* + * probe function for new CPC-USB devices + */ +static int ems_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct net_device *netdev; + struct ems_usb *dev; + int i, err = -ENOMEM; + + netdev = alloc_candev(sizeof(struct ems_usb)); + if (!netdev) { + dev_err(netdev->dev.parent, "Couldn't alloc candev\n"); + return -ENOMEM; + } + + dev = netdev_priv(netdev); + + dev->udev = interface_to_usbdev(intf); + dev->netdev = netdev; + + dev->can.state = CAN_STATE_STOPPED; + dev->can.clock.freq = EMS_USB_ARM7_CLOCK; + dev->can.bittiming_const = &ems_usb_bittiming_const; + dev->can.do_set_bittiming = ems_usb_set_bittiming; + dev->can.do_set_mode = ems_usb_set_mode; + + netdev->flags |= IFF_ECHO; /* we support local echo */ + + netdev->netdev_ops = &ems_usb_netdev_ops; + + netdev->flags |= IFF_ECHO; /* we support local echo */ + + init_usb_anchor(&dev->rx_submitted); + + init_usb_anchor(&dev->tx_submitted); + atomic_set(&dev->active_tx_urbs, 0); + + for (i = 0; i < MAX_TX_URBS; i++) + dev->tx_contexts[i].echo_index = MAX_TX_URBS; + + dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->intr_urb) { + dev_err(netdev->dev.parent, "Couldn't alloc intr URB\n"); + goto cleanup_candev; + } + + dev->intr_in_buffer = kzalloc(INTR_IN_BUFFER_SIZE, GFP_KERNEL); + if (!dev->intr_in_buffer) { + dev_err(netdev->dev.parent, "Couldn't alloc Intr buffer\n"); + goto cleanup_intr_urb; + } + + dev->tx_msg_buffer = kzalloc(CPC_HEADER_SIZE + + sizeof(struct ems_cpc_msg), GFP_KERNEL); + if (!dev->tx_msg_buffer) { + dev_err(netdev->dev.parent, "Couldn't alloc Tx buffer\n"); + goto cleanup_intr_in_buffer; + } + + usb_set_intfdata(intf, dev); + + SET_NETDEV_DEV(netdev, &intf->dev); + + init_params_sja1000(&dev->active_params); + + err = ems_usb_command_msg(dev, &dev->active_params); + if (err) { + dev_err(netdev->dev.parent, + "couldn't initialize controller: %d\n", err); + goto cleanup_tx_msg_buffer; + } + + err = register_candev(netdev); + if (err) { + dev_err(netdev->dev.parent, + "couldn't register CAN device: %d\n", err); + goto cleanup_tx_msg_buffer; + } + + return 0; + +cleanup_tx_msg_buffer: + kfree(dev->tx_msg_buffer); + +cleanup_intr_in_buffer: + kfree(dev->intr_in_buffer); + +cleanup_intr_urb: + usb_free_urb(dev->intr_urb); + +cleanup_candev: + free_candev(netdev); + + return err; +} + +/* + * called by the usb core when the device is removed from the system + */ +static void ems_usb_disconnect(struct usb_interface *intf) +{ + struct ems_usb *dev = usb_get_intfdata(intf); + + usb_set_intfdata(intf, NULL); + + if (dev) { + unregister_netdev(dev->netdev); + free_candev(dev->netdev); + + unlink_all_urbs(dev); + + usb_free_urb(dev->intr_urb); + + kfree(dev->intr_in_buffer); + } +} + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver ems_usb_driver = { + .name = "ems_usb", + .probe = ems_usb_probe, + .disconnect = ems_usb_disconnect, + .id_table = ems_usb_table, +}; + +static int __init ems_usb_init(void) +{ + int err; + + printk(KERN_INFO "CPC-USB kernel driver loaded\n"); + + /* register this driver with the USB subsystem */ + err = usb_register(&ems_usb_driver); + + if (err) { + err("usb_register failed. Error number %d\n", err); + return err; + } + + return 0; +} + +static void __exit ems_usb_exit(void) +{ + /* deregister this driver with the USB subsystem */ + usb_deregister(&ems_usb_driver); +} + +module_init(ems_usb_init); +module_exit(ems_usb_exit); diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c index d45eacb7670..211c8e9182f 100644 --- a/drivers/net/cnic.c +++ b/drivers/net/cnic.c @@ -85,8 +85,6 @@ static int cnic_uio_open(struct uio_info *uinfo, struct inode *inode) cp->uio_dev = iminor(inode); - cnic_shutdown_bnx2_rx_ring(dev); - cnic_init_bnx2_tx_ring(dev); cnic_init_bnx2_rx_ring(dev); @@ -98,6 +96,8 @@ static int cnic_uio_close(struct uio_info *uinfo, struct inode *inode) struct cnic_dev *dev = uinfo->priv; struct cnic_local *cp = dev->cnic_priv; + cnic_shutdown_bnx2_rx_ring(dev); + cp->uio_dev = -1; return 0; } diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c index 3e3fab8afb1..61f9da2b494 100644 --- a/drivers/net/cpmac.c +++ b/drivers/net/cpmac.c @@ -1109,7 +1109,7 @@ static int external_switch; static int __devinit cpmac_probe(struct platform_device *pdev) { int rc, phy_id; - char mdio_bus_id[BUS_ID_SIZE]; + char mdio_bus_id[MII_BUS_ID_SIZE]; struct resource *mem; struct cpmac_priv *priv; struct net_device *dev; @@ -1118,7 +1118,7 @@ static int __devinit cpmac_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (external_switch || dumb_switch) { - strncpy(mdio_bus_id, "0", BUS_ID_SIZE); /* fixed phys bus */ + strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */ phy_id = pdev->id; } else { for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { @@ -1126,7 +1126,7 @@ static int __devinit cpmac_probe(struct platform_device *pdev) continue; if (!cpmac_mii->phy_map[phy_id]) continue; - strncpy(mdio_bus_id, cpmac_mii->id, BUS_ID_SIZE); + strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE); break; } } @@ -1167,7 +1167,7 @@ static int __devinit cpmac_probe(struct platform_device *pdev) priv->msg_enable = netif_msg_init(debug_level, 0xff); memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr)); - snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); + snprintf(priv->phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII); diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 977c3d35827..41bd7aeafd8 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -3083,7 +3083,6 @@ static const struct net_device_ops ehea_netdev_ops = { .ndo_poll_controller = ehea_netpoll, #endif .ndo_get_stats = ehea_get_stats, - .ndo_change_mtu = eth_change_mtu, .ndo_set_mac_address = ehea_set_mac_addr, .ndo_validate_addr = eth_validate_addr, .ndo_set_multicast_list = ehea_set_multicast_list, diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index a0231cd079f..7d76bb085e1 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -286,41 +286,6 @@ void igb_mta_set(struct e1000_hw *hw, u32 hash_value) } /** - * igb_update_mc_addr_list - Update Multicast addresses - * @hw: pointer to the HW structure - * @mc_addr_list: array of multicast addresses to program - * @mc_addr_count: number of multicast addresses to program - * - * Updates entire Multicast Table Array. - * The caller must have a packed mc_addr_list of multicast addresses. - **/ -void igb_update_mc_addr_list(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count) -{ - u32 hash_value, hash_bit, hash_reg; - int i; - - /* clear mta_shadow */ - memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); - - /* update mta_shadow from mc_addr_list */ - for (i = 0; (u32) i < mc_addr_count; i++) { - hash_value = igb_hash_mc_addr(hw, mc_addr_list); - - hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); - hash_bit = hash_value & 0x1F; - - hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit); - mc_addr_list += (ETH_ALEN); - } - - /* replace the entire MTA table */ - for (i = hw->mac.mta_reg_count - 1; i >= 0; i--) - array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]); - wrfl(); -} - -/** * igb_hash_mc_addr - Generate a multicast hash value * @hw: pointer to the HW structure * @mc_addr: pointer to a multicast address @@ -329,7 +294,7 @@ void igb_update_mc_addr_list(struct e1000_hw *hw, * the multicast filter table array address and new table value. See * igb_mta_set() **/ -u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) +static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) { u32 hash_value, hash_mask; u8 bit_shift = 0; @@ -392,6 +357,41 @@ u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) } /** + * igb_update_mc_addr_list - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * + * Updates entire Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + **/ +void igb_update_mc_addr_list(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count) +{ + u32 hash_value, hash_bit, hash_reg; + int i; + + /* clear mta_shadow */ + memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); + + /* update mta_shadow from mc_addr_list */ + for (i = 0; (u32) i < mc_addr_count; i++) { + hash_value = igb_hash_mc_addr(hw, mc_addr_list); + + hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); + hash_bit = hash_value & 0x1F; + + hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit); + mc_addr_list += (ETH_ALEN); + } + + /* replace the entire MTA table */ + for (i = hw->mac.mta_reg_count - 1; i >= 0; i--) + array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]); + wrfl(); +} + +/** * igb_clear_hw_cntrs_base - Clear base hardware counters * @hw: pointer to the HW structure * diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h index 7518af8cbbf..bca17d88241 100644 --- a/drivers/net/igb/e1000_mac.h +++ b/drivers/net/igb/e1000_mac.h @@ -88,6 +88,5 @@ enum e1000_mng_mode { #define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 extern void e1000_init_function_pointers_82575(struct e1000_hw *hw); -extern u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr); #endif diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index dd688d45e9c..385be601666 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -267,7 +267,8 @@ struct ixgbe_adapter { enum ixgbe_fc_mode last_lfc_mode; /* Interrupt Throttle Rate */ - u32 itr_setting; + u32 rx_itr_setting; + u32 tx_itr_setting; u16 eitr_low; u16 eitr_high; @@ -351,7 +352,8 @@ struct ixgbe_adapter { struct ixgbe_hw_stats stats; /* Interrupt Throttle Rate */ - u32 eitr_param; + u32 rx_eitr_param; + u32 tx_eitr_param; unsigned long state; u64 tx_busy; diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 026e94a9984..53b0a668025 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -1929,7 +1929,7 @@ static int ixgbe_get_coalesce(struct net_device *netdev, ec->tx_max_coalesced_frames_irq = adapter->tx_ring[0].work_limit; /* only valid if in constant ITR mode */ - switch (adapter->itr_setting) { + switch (adapter->rx_itr_setting) { case 0: /* throttling disabled */ ec->rx_coalesce_usecs = 0; @@ -1940,9 +1940,25 @@ static int ixgbe_get_coalesce(struct net_device *netdev, break; default: /* fixed interrupt rate mode */ - ec->rx_coalesce_usecs = 1000000/adapter->eitr_param; + ec->rx_coalesce_usecs = 1000000/adapter->rx_eitr_param; break; } + + /* only valid if in constant ITR mode */ + switch (adapter->tx_itr_setting) { + case 0: + /* throttling disabled */ + ec->tx_coalesce_usecs = 0; + break; + case 1: + /* dynamic ITR mode */ + ec->tx_coalesce_usecs = 1; + break; + default: + ec->tx_coalesce_usecs = 1000000/adapter->tx_eitr_param; + break; + } + return 0; } @@ -1953,6 +1969,14 @@ static int ixgbe_set_coalesce(struct net_device *netdev, struct ixgbe_q_vector *q_vector; int i; + /* + * don't accept tx specific changes if we've got mixed RxTx vectors + * test and jump out here if needed before changing the rx numbers + */ + if ((1000000/ec->tx_coalesce_usecs) != adapter->tx_eitr_param && + adapter->q_vector[0]->txr_count && adapter->q_vector[0]->rxr_count) + return -EINVAL; + if (ec->tx_max_coalesced_frames_irq) adapter->tx_ring[0].work_limit = ec->tx_max_coalesced_frames_irq; @@ -1963,26 +1987,49 @@ static int ixgbe_set_coalesce(struct net_device *netdev, return -EINVAL; /* store the value in ints/second */ - adapter->eitr_param = 1000000/ec->rx_coalesce_usecs; + adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs; /* static value of interrupt rate */ - adapter->itr_setting = adapter->eitr_param; + adapter->rx_itr_setting = adapter->rx_eitr_param; /* clear the lower bit as its used for dynamic state */ - adapter->itr_setting &= ~1; + adapter->rx_itr_setting &= ~1; } else if (ec->rx_coalesce_usecs == 1) { /* 1 means dynamic mode */ - adapter->eitr_param = 20000; - adapter->itr_setting = 1; + adapter->rx_eitr_param = 20000; + adapter->rx_itr_setting = 1; } else { /* * any other value means disable eitr, which is best * served by setting the interrupt rate very high */ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) - adapter->eitr_param = IXGBE_MAX_RSC_INT_RATE; + adapter->rx_eitr_param = IXGBE_MAX_RSC_INT_RATE; else - adapter->eitr_param = IXGBE_MAX_INT_RATE; - adapter->itr_setting = 0; + adapter->rx_eitr_param = IXGBE_MAX_INT_RATE; + adapter->rx_itr_setting = 0; + } + + if (ec->tx_coalesce_usecs > 1) { + /* check the limits */ + if ((1000000/ec->tx_coalesce_usecs > IXGBE_MAX_INT_RATE) || + (1000000/ec->tx_coalesce_usecs < IXGBE_MIN_INT_RATE)) + return -EINVAL; + + /* store the value in ints/second */ + adapter->tx_eitr_param = 1000000/ec->tx_coalesce_usecs; + + /* static value of interrupt rate */ + adapter->tx_itr_setting = adapter->tx_eitr_param; + + /* clear the lower bit as its used for dynamic state */ + adapter->tx_itr_setting &= ~1; + } else if (ec->tx_coalesce_usecs == 1) { + /* 1 means dynamic mode */ + adapter->tx_eitr_param = 10000; + adapter->tx_itr_setting = 1; + } else { + adapter->tx_eitr_param = IXGBE_MAX_INT_RATE; + adapter->tx_itr_setting = 0; } /* MSI/MSIx Interrupt Mode */ @@ -1992,17 +2039,17 @@ static int ixgbe_set_coalesce(struct net_device *netdev, for (i = 0; i < num_vectors; i++) { q_vector = adapter->q_vector[i]; if (q_vector->txr_count && !q_vector->rxr_count) - /* tx vector gets half the rate */ - q_vector->eitr = (adapter->eitr_param >> 1); + /* tx only */ + q_vector->eitr = adapter->tx_eitr_param; else /* rx only or mixed */ - q_vector->eitr = adapter->eitr_param; + q_vector->eitr = adapter->rx_eitr_param; ixgbe_write_eitr(q_vector); } /* Legacy Interrupt Mode */ } else { q_vector = adapter->q_vector[0]; - q_vector->eitr = adapter->eitr_param; + q_vector->eitr = adapter->rx_eitr_param; ixgbe_write_eitr(q_vector); } diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 59ad9590e70..c407bd9de0d 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -926,12 +926,12 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) r_idx + 1); } - /* if this is a tx only vector halve the interrupt rate */ if (q_vector->txr_count && !q_vector->rxr_count) - q_vector->eitr = (adapter->eitr_param >> 1); + /* tx only */ + q_vector->eitr = adapter->tx_eitr_param; else if (q_vector->rxr_count) - /* rx only */ - q_vector->eitr = adapter->eitr_param; + /* rx or mixed */ + q_vector->eitr = adapter->rx_eitr_param; ixgbe_write_eitr(q_vector); } @@ -1359,7 +1359,7 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget) /* If all Rx work done, exit the polling mode */ if (work_done < budget) { napi_complete(napi); - if (adapter->itr_setting & 1) + if (adapter->rx_itr_setting & 1) ixgbe_set_itr_msix(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_enable_queues(adapter, @@ -1420,7 +1420,7 @@ static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget) /* If all Rx work done, exit the polling mode */ if (work_done < budget) { napi_complete(napi); - if (adapter->itr_setting & 1) + if (adapter->rx_itr_setting & 1) ixgbe_set_itr_msix(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_enable_queues(adapter, @@ -1458,10 +1458,10 @@ static int ixgbe_clean_txonly(struct napi_struct *napi, int budget) if (!ixgbe_clean_tx_irq(q_vector, tx_ring)) work_done = budget; - /* If all Rx work done, exit the polling mode */ + /* If all Tx work done, exit the polling mode */ if (work_done < budget) { napi_complete(napi); - if (adapter->itr_setting & 1) + if (adapter->tx_itr_setting & 1) ixgbe_set_itr_msix(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx)); @@ -1848,7 +1848,7 @@ static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter) struct ixgbe_hw *hw = &adapter->hw; IXGBE_WRITE_REG(hw, IXGBE_EITR(0), - EITR_INTS_PER_SEC_TO_REG(adapter->eitr_param)); + EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr_param)); ixgbe_set_ivar(adapter, 0, 0, 0); ixgbe_set_ivar(adapter, 1, 0, 0); @@ -1970,6 +1970,50 @@ static u32 ixgbe_setup_mrqc(struct ixgbe_adapter *adapter) } /** + * ixgbe_configure_rscctl - enable RSC for the indicated ring + * @adapter: address of board private structure + * @index: index of ring to set + * @rx_buf_len: rx buffer length + **/ +static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, int index, + int rx_buf_len) +{ + struct ixgbe_ring *rx_ring; + struct ixgbe_hw *hw = &adapter->hw; + int j; + u32 rscctrl; + + rx_ring = &adapter->rx_ring[index]; + j = rx_ring->reg_idx; + rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j)); + rscctrl |= IXGBE_RSCCTL_RSCEN; + /* + * we must limit the number of descriptors so that the + * total size of max desc * buf_len is not greater + * than 65535 + */ + if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) { +#if (MAX_SKB_FRAGS > 16) + rscctrl |= IXGBE_RSCCTL_MAXDESC_16; +#elif (MAX_SKB_FRAGS > 8) + rscctrl |= IXGBE_RSCCTL_MAXDESC_8; +#elif (MAX_SKB_FRAGS > 4) + rscctrl |= IXGBE_RSCCTL_MAXDESC_4; +#else + rscctrl |= IXGBE_RSCCTL_MAXDESC_1; +#endif + } else { + if (rx_buf_len < IXGBE_RXBUFFER_4096) + rscctrl |= IXGBE_RSCCTL_MAXDESC_16; + else if (rx_buf_len < IXGBE_RXBUFFER_8192) + rscctrl |= IXGBE_RSCCTL_MAXDESC_8; + else + rscctrl |= IXGBE_RSCCTL_MAXDESC_4; + } + IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl); +} + +/** * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset * @adapter: board private structure * @@ -1990,7 +2034,6 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) u32 fctrl, hlreg0; u32 reta = 0, mrqc = 0; u32 rdrxctl; - u32 rscctrl; int rx_buf_len; /* Decide whether to use packet split mode or not */ @@ -2148,36 +2191,9 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { /* Enable 82599 HW-RSC */ - for (i = 0; i < adapter->num_rx_queues; i++) { - rx_ring = &adapter->rx_ring[i]; - j = rx_ring->reg_idx; - rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j)); - rscctrl |= IXGBE_RSCCTL_RSCEN; - /* - * we must limit the number of descriptors so that the - * total size of max desc * buf_len is not greater - * than 65535 - */ - if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) { -#if (MAX_SKB_FRAGS > 16) - rscctrl |= IXGBE_RSCCTL_MAXDESC_16; -#elif (MAX_SKB_FRAGS > 8) - rscctrl |= IXGBE_RSCCTL_MAXDESC_8; -#elif (MAX_SKB_FRAGS > 4) - rscctrl |= IXGBE_RSCCTL_MAXDESC_4; -#else - rscctrl |= IXGBE_RSCCTL_MAXDESC_1; -#endif - } else { - if (rx_buf_len < IXGBE_RXBUFFER_4096) - rscctrl |= IXGBE_RSCCTL_MAXDESC_16; - else if (rx_buf_len < IXGBE_RXBUFFER_8192) - rscctrl |= IXGBE_RSCCTL_MAXDESC_8; - else - rscctrl |= IXGBE_RSCCTL_MAXDESC_4; - } - IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl); - } + for (i = 0; i < adapter->num_rx_queues; i++) + ixgbe_configure_rscctl(adapter, i, rx_buf_len); + /* Disable RSC for ACK packets */ IXGBE_WRITE_REG(hw, IXGBE_RSCDBU, (IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU))); @@ -2926,6 +2942,8 @@ void ixgbe_down(struct ixgbe_adapter *adapter) ixgbe_napi_disable_all(adapter); + clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); + del_timer_sync(&adapter->sfp_timer); del_timer_sync(&adapter->watchdog_timer); cancel_work_sync(&adapter->watchdog_task); @@ -2989,7 +3007,7 @@ static int ixgbe_poll(struct napi_struct *napi, int budget) /* If budget not fully consumed, exit the polling mode */ if (work_done < budget) { napi_complete(napi); - if (adapter->itr_setting & 1) + if (adapter->rx_itr_setting & 1) ixgbe_set_itr(adapter); if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_enable_queues(adapter, IXGBE_EIMS_RTX_QUEUE); @@ -3599,7 +3617,10 @@ static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter) if (!q_vector) goto err_out; q_vector->adapter = adapter; - q_vector->eitr = adapter->eitr_param; + if (q_vector->txr_count && !q_vector->rxr_count) + q_vector->eitr = adapter->tx_eitr_param; + else + q_vector->eitr = adapter->rx_eitr_param; q_vector->v_idx = q_idx; netif_napi_add(adapter->netdev, &q_vector->napi, (*poll), 64); adapter->q_vector[q_idx] = q_vector; @@ -3868,8 +3889,10 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) hw->fc.disable_fc_autoneg = false; /* enable itr by default in dynamic mode */ - adapter->itr_setting = 1; - adapter->eitr_param = 20000; + adapter->rx_itr_setting = 1; + adapter->rx_eitr_param = 20000; + adapter->tx_itr_setting = 1; + adapter->tx_eitr_param = 10000; /* set defaults for eitr in MegaBytes */ adapter->eitr_low = 10; diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index f7bdde111df..b5aa974827e 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1469,6 +1469,7 @@ netxen_nic_resume(struct pci_dev *pdev) } netxen_schedule_work(adapter, netxen_fw_poll_work, FW_POLL_DELAY); + return 0; err_out_detach: netxen_nic_detach(adapter); @@ -1903,12 +1904,13 @@ static void netxen_tx_timeout_task(struct work_struct *work) netif_wake_queue(adapter->netdev); - goto done; + clear_bit(__NX_RESETTING, &adapter->state); } else { + clear_bit(__NX_RESETTING, &adapter->state); if (!netxen_nic_reset_context(adapter)) { adapter->netdev->trans_start = jiffies; - goto done; + return; } /* context reset failed, fall through for fw reset */ @@ -1916,8 +1918,6 @@ static void netxen_tx_timeout_task(struct work_struct *work) request_reset: adapter->need_fw_reset = 1; -done: - clear_bit(__NX_RESETTING, &adapter->state); } struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev) diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 97db1c73234..474876c879c 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -340,12 +340,11 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link) base = &virt[hw_info[i].offset & (req.Size-1)]; if ((readb(base+0) == hw_info[i].a0) && (readb(base+2) == hw_info[i].a1) && - (readb(base+4) == hw_info[i].a2)) - break; - } - if (i < NR_INFO) { - for (j = 0; j < 6; j++) - dev->dev_addr[j] = readb(base + (j<<1)); + (readb(base+4) == hw_info[i].a2)) { + for (j = 0; j < 6; j++) + dev->dev_addr[j] = readb(base + (j<<1)); + break; + } } iounmap(virt); diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 15140f9f2e9..ef1165718dd 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1497,7 +1497,6 @@ static int sky2_up(struct net_device *dev) if (ramsize > 0) { u32 rxspace; - hw->flags |= SKY2_HW_RAM_BUFFER; pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize); if (ramsize < 16) rxspace = ramsize / 2; @@ -2926,6 +2925,9 @@ static int __devinit sky2_init(struct sky2_hw *hw) ++hw->ports; } + if (sky2_read8(hw, B2_E_0)) + hw->flags |= SKY2_HW_RAM_BUFFER; + return 0; } diff --git a/drivers/net/sunvnet.c b/drivers/net/sunvnet.c index f1e5e4542c2..bc74db0d12f 100644 --- a/drivers/net/sunvnet.c +++ b/drivers/net/sunvnet.c @@ -1016,7 +1016,6 @@ static const struct net_device_ops vnet_ops = { .ndo_open = vnet_open, .ndo_stop = vnet_close, .ndo_set_multicast_list = vnet_set_rx_mode, - .ndo_change_mtu = eth_change_mtu, .ndo_set_mac_address = vnet_set_mac_addr, .ndo_validate_addr = eth_validate_addr, .ndo_tx_timeout = vnet_tx_timeout, diff --git a/drivers/net/tun.c b/drivers/net/tun.c index d3ee1994b02..4fdfa2ae541 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -946,8 +946,6 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) char *name; unsigned long flags = 0; - err = -EINVAL; - if (!capable(CAP_NET_ADMIN)) return -EPERM; err = security_tun_dev_create(); @@ -964,7 +962,7 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) flags |= TUN_TAP_DEV; name = "tap%d"; } else - goto failed; + return -EINVAL; if (*ifr->ifr_name) name = ifr->ifr_name; diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index e2a39b9be96..e391ef969c2 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -263,6 +263,7 @@ static int kaweth_control(struct kaweth_device *kaweth, int timeout) { struct usb_ctrlrequest *dr; + int retval; dbg("kaweth_control()"); @@ -278,18 +279,21 @@ static int kaweth_control(struct kaweth_device *kaweth, return -ENOMEM; } - dr->bRequestType= requesttype; + dr->bRequestType = requesttype; dr->bRequest = request; dr->wValue = cpu_to_le16(value); dr->wIndex = cpu_to_le16(index); dr->wLength = cpu_to_le16(size); - return kaweth_internal_control_msg(kaweth->dev, - pipe, - dr, - data, - size, - timeout); + retval = kaweth_internal_control_msg(kaweth->dev, + pipe, + dr, + data, + size, + timeout); + + kfree(dr); + return retval; } /**************************************************************** diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 938fb3530a7..c6c922247d0 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1227,7 +1227,7 @@ static const struct driver_info smsc95xx_info = { .rx_fixup = smsc95xx_rx_fixup, .tx_fixup = smsc95xx_tx_fixup, .status = smsc95xx_status, - .flags = FLAG_ETHER, + .flags = FLAG_ETHER | FLAG_SEND_ZLP, }; static const struct usb_device_id products[] = { @@ -1237,10 +1237,75 @@ static const struct usb_device_id products[] = { .driver_info = (unsigned long) &smsc95xx_info, }, { + /* SMSC9505 USB Ethernet Device */ + USB_DEVICE(0x0424, 0x9505), + .driver_info = (unsigned long) &smsc95xx_info, + }, + { + /* SMSC9500A USB Ethernet Device */ + USB_DEVICE(0x0424, 0x9E00), + .driver_info = (unsigned long) &smsc95xx_info, + }, + { + /* SMSC9505A USB Ethernet Device */ + USB_DEVICE(0x0424, 0x9E01), + .driver_info = (unsigned long) &smsc95xx_info, + }, + { /* SMSC9512/9514 USB Hub & Ethernet Device */ USB_DEVICE(0x0424, 0xec00), .driver_info = (unsigned long) &smsc95xx_info, }, + { + /* SMSC9500 USB Ethernet Device (SAL10) */ + USB_DEVICE(0x0424, 0x9900), + .driver_info = (unsigned long) &smsc95xx_info, + }, + { + /* SMSC9505 USB Ethernet Device (SAL10) */ + USB_DEVICE(0x0424, 0x9901), + .driver_info = (unsigned long) &smsc95xx_info, + }, + { + /* SMSC9500A USB Ethernet Device (SAL10) */ + USB_DEVICE(0x0424, 0x9902), + .driver_info = (unsigned long) &smsc95xx_info, + }, + { + /* SMSC9505A USB Ethernet Device (SAL10) */ + USB_DEVICE(0x0424, 0x9903), + .driver_info = (unsigned long) &smsc95xx_info, + }, + { + /* SMSC9512/9514 USB Hub & Ethernet Device (SAL10) */ + USB_DEVICE(0x0424, 0x9904), + .driver_info = (unsigned long) &smsc95xx_info, + }, + { + /* SMSC9500A USB Ethernet Device (HAL) */ + USB_DEVICE(0x0424, 0x9905), + .driver_info = (unsigned long) &smsc95xx_info, + }, + { + /* SMSC9505A USB Ethernet Device (HAL) */ + USB_DEVICE(0x0424, 0x9906), + .driver_info = (unsigned long) &smsc95xx_info, + }, + { + /* SMSC9500 USB Ethernet Device (Alternate ID) */ + USB_DEVICE(0x0424, 0x9907), + .driver_info = (unsigned long) &smsc95xx_info, + }, + { + /* SMSC9500A USB Ethernet Device (Alternate ID) */ + USB_DEVICE(0x0424, 0x9908), + .driver_info = (unsigned long) &smsc95xx_info, + }, + { + /* SMSC9512/9514 USB Hub & Ethernet Device (Alternate ID) */ + USB_DEVICE(0x0424, 0x9909), + .driver_info = (unsigned long) &smsc95xx_info, + }, { }, /* END */ }; MODULE_DEVICE_TABLE(usb, products); diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 24b36f79515..ca5ca5ae061 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1049,7 +1049,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, * NOTE: strictly conforming cdc-ether devices should expect * the ZLP here, but ignore the one-byte packet. */ - if ((length % dev->maxpacket) == 0) { + if (!(info->flags & FLAG_SEND_ZLP) && (length % dev->maxpacket) == 0) { urb->transfer_buffer_length++; if (skb_tailroom(skb)) { skb->data[skb->len] = 0; diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c index e0138ac8bf5..e974e5829e1 100644 --- a/drivers/net/wireless/ath/ar9170/usb.c +++ b/drivers/net/wireless/ath/ar9170/usb.c @@ -64,6 +64,8 @@ static struct usb_device_id ar9170_usb_ids[] = { { USB_DEVICE(0x0cf3, 0x9170) }, /* Atheros TG121N */ { USB_DEVICE(0x0cf3, 0x1001) }, + /* TP-Link TL-WN821N v2 */ + { USB_DEVICE(0x0cf3, 0x1002) }, /* Cace Airpcap NX */ { USB_DEVICE(0xcace, 0x0300) }, /* D-Link DWA 160A */ diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index 3234995e888..0ad6d0b76e9 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -609,14 +609,24 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) AR_PHY_CH1_EXT_CCA, AR_PHY_CH2_EXT_CCA }; - u8 chainmask; + u8 chainmask, rx_chain_status; + rx_chain_status = REG_READ(ah, AR_PHY_RX_CHAINMASK); if (AR_SREV_9285(ah)) chainmask = 0x9; - else if (AR_SREV_9280(ah) || AR_SREV_9287(ah)) - chainmask = 0x1B; - else - chainmask = 0x3F; + else if (AR_SREV_9280(ah) || AR_SREV_9287(ah)) { + if ((rx_chain_status & 0x2) || (rx_chain_status & 0x4)) + chainmask = 0x1B; + else + chainmask = 0x09; + } else { + if (rx_chain_status & 0x4) + chainmask = 0x3F; + else if (rx_chain_status & 0x2) + chainmask = 0x1B; + else + chainmask = 0x09; + } h = ah->nfCalHist; @@ -697,6 +707,8 @@ void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah) noise_floor = AR_PHY_CCA_MAX_AR9280_GOOD_VALUE; else if (AR_SREV_9285(ah)) noise_floor = AR_PHY_CCA_MAX_AR9285_GOOD_VALUE; + else if (AR_SREV_9287(ah)) + noise_floor = AR_PHY_CCA_MAX_AR9287_GOOD_VALUE; else noise_floor = AR_PHY_CCA_MAX_AR5416_GOOD_VALUE; @@ -924,6 +936,7 @@ static inline void ath9k_hw_9285_pa_cal(struct ath_hw *ah, bool is_reset) regVal |= (1 << (19 + i)); REG_WRITE(ah, 0x7834, regVal); udelay(1); + regVal = REG_READ(ah, 0x7834); regVal &= (~(0x1 << (19 + i))); reg_field = MS(REG_READ(ah, 0x7840), AR9285_AN_RXTXBB1_SPARE9); regVal |= (reg_field << (19 + i)); diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h index 019bcbba40e..9028ab193e4 100644 --- a/drivers/net/wireless/ath/ath9k/calib.h +++ b/drivers/net/wireless/ath/ath9k/calib.h @@ -28,6 +28,7 @@ extern const struct ath9k_percal_data adc_init_dc_cal; #define AR_PHY_CCA_MAX_AR5416_GOOD_VALUE -85 #define AR_PHY_CCA_MAX_AR9280_GOOD_VALUE -112 #define AR_PHY_CCA_MAX_AR9285_GOOD_VALUE -118 +#define AR_PHY_CCA_MAX_AR9287_GOOD_VALUE -118 #define AR_PHY_CCA_MAX_HIGH_VALUE -62 #define AR_PHY_CCA_MIN_BAD_VALUE -140 #define AR_PHY_CCA_FILTERWINDOW_LENGTH_INIT 3 diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c index ae7fb5dcb26..4071fc91da0 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_def.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c @@ -509,6 +509,8 @@ static void ath9k_hw_def_set_board_values(struct ath_hw *ah, REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE, eep->baseEepHeader.dacLpMode); + udelay(100); + REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, AR_PHY_FRAME_CTL_TX_CLIP, pModal->miscBits >> 2); @@ -902,7 +904,7 @@ static void ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah, u16 powerLimit) { #define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */ -#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 10 /* 10*log10(3)*2 */ +#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 9 /* 10*log10(3)*2 */ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah); struct ar5416_eeprom_def *pEepData = &ah->eeprom.def; diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index b6c6cca0781..ca7694caf36 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -842,7 +842,7 @@ static void ath9k_hw_init_mode_regs(struct ath_hw *ah) static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah) { - if (AR_SREV_9287_11(ah)) + if (AR_SREV_9287_11_OR_LATER(ah)) INIT_INI_ARRAY(&ah->iniModesRxGain, ar9287Modes_rx_gain_9287_1_1, ARRAY_SIZE(ar9287Modes_rx_gain_9287_1_1), 6); @@ -853,7 +853,7 @@ static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah) else if (AR_SREV_9280_20(ah)) ath9k_hw_init_rxgain_ini(ah); - if (AR_SREV_9287_11(ah)) { + if (AR_SREV_9287_11_OR_LATER(ah)) { INIT_INI_ARRAY(&ah->iniModesTxGain, ar9287Modes_tx_gain_9287_1_1, ARRAY_SIZE(ar9287Modes_tx_gain_9287_1_1), 6); @@ -965,7 +965,7 @@ int ath9k_hw_init(struct ath_hw *ah) ath9k_hw_init_mode_regs(ah); if (ah->is_pciexpress) - ath9k_hw_configpcipowersave(ah, 0); + ath9k_hw_configpcipowersave(ah, 0, 0); else ath9k_hw_disablepcie(ah); @@ -1273,6 +1273,15 @@ static void ath9k_hw_override_ini(struct ath_hw *ah, */ REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT)); + if (AR_SREV_9280_10_OR_LATER(ah)) { + val = REG_READ(ah, AR_PCU_MISC_MODE2) & + (~AR_PCU_MISC_MODE2_HWWAR1); + + if (AR_SREV_9287_10_OR_LATER(ah)) + val = val & (~AR_PCU_MISC_MODE2_HWWAR2); + + REG_WRITE(ah, AR_PCU_MISC_MODE2, val); + } if (!AR_SREV_5416_20_OR_LATER(ah) || AR_SREV_9280_10_OR_LATER(ah)) @@ -1784,7 +1793,7 @@ static void ath9k_hw_set_regs(struct ath_hw *ah, struct ath9k_channel *chan, static bool ath9k_hw_chip_reset(struct ath_hw *ah, struct ath9k_channel *chan) { - if (OLC_FOR_AR9280_20_LATER) { + if (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL)) { if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) return false; } else if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_WARM)) @@ -2338,6 +2347,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, struct ath9k_channel *curchan = ah->curchan; u32 saveDefAntenna; u32 macStaId1; + u64 tsf = 0; int i, rx_chainmask, r; ah->extprotspacing = sc->ht_extprotspacing; @@ -2347,7 +2357,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) return -EIO; - if (curchan) + if (curchan && !ah->chip_fullsleep) ath9k_hw_getnf(ah, curchan); if (bChannelChange && @@ -2356,8 +2366,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, (chan->channel != ah->curchan->channel) && ((chan->channelFlags & CHANNEL_ALL) == (ah->curchan->channelFlags & CHANNEL_ALL)) && - (!AR_SREV_9280(ah) || (!IS_CHAN_A_5MHZ_SPACED(chan) && - !IS_CHAN_A_5MHZ_SPACED(ah->curchan)))) { + !(AR_SREV_9280(ah) || IS_CHAN_A_5MHZ_SPACED(chan) || + IS_CHAN_A_5MHZ_SPACED(ah->curchan))) { if (ath9k_hw_channel_change(ah, chan, sc->tx_chan_width)) { ath9k_hw_loadnf(ah, ah->curchan); @@ -2372,6 +2382,10 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, macStaId1 = REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_BASE_RATE_11B; + /* For chips on which RTC reset is done, save TSF before it gets cleared */ + if (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL)) + tsf = ath9k_hw_gettsf64(ah); + saveLedState = REG_READ(ah, AR_CFG_LED) & (AR_CFG_LED_ASSOC_CTL | AR_CFG_LED_MODE_SEL | AR_CFG_LED_BLINK_THRESH_SEL | AR_CFG_LED_BLINK_SLOW); @@ -2398,6 +2412,10 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, udelay(50); } + /* Restore TSF */ + if (tsf && AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL)) + ath9k_hw_settsf64(ah, tsf); + if (AR_SREV_9280_10_OR_LATER(ah)) REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE); @@ -3005,9 +3023,10 @@ void ath9k_ps_restore(struct ath_softc *sc) * Programming the SerDes must go through the same 288 bit serial shift * register as the other analog registers. Hence the 9 writes. */ -void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore) +void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off) { u8 i; + u32 val; if (ah->is_pciexpress != true) return; @@ -3017,84 +3036,113 @@ void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore) return; /* Nothing to do on restore for 11N */ - if (restore) - return; + if (!restore) { + if (AR_SREV_9280_20_OR_LATER(ah)) { + /* + * AR9280 2.0 or later chips use SerDes values from the + * initvals.h initialized depending on chipset during + * ath9k_hw_init() + */ + for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) { + REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0), + INI_RA(&ah->iniPcieSerdes, i, 1)); + } + } else if (AR_SREV_9280(ah) && + (ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) { + REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00); + REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924); + + /* RX shut off when elecidle is asserted */ + REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019); + REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820); + REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560); + + /* Shut off CLKREQ active in L1 */ + if (ah->config.pcie_clock_req) + REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc); + else + REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd); - if (AR_SREV_9280_20_OR_LATER(ah)) { - /* - * AR9280 2.0 or later chips use SerDes values from the - * initvals.h initialized depending on chipset during - * ath9k_hw_init() - */ - for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) { - REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0), - INI_RA(&ah->iniPcieSerdes, i, 1)); - } - } else if (AR_SREV_9280(ah) && - (ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) { - REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00); - REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924); + REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40); + REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554); + REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007); - /* RX shut off when elecidle is asserted */ - REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019); - REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820); - REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560); + /* Load the new settings */ + REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); - /* Shut off CLKREQ active in L1 */ - if (ah->config.pcie_clock_req) - REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc); - else - REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd); - - REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40); - REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554); - REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007); + } else { + REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00); + REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924); - /* Load the new settings */ - REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); + /* RX shut off when elecidle is asserted */ + REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039); + REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824); + REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579); - } else { - REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00); - REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924); + /* + * Ignore ah->ah_config.pcie_clock_req setting for + * pre-AR9280 11n + */ + REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff); - /* RX shut off when elecidle is asserted */ - REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039); - REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824); - REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579); + REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40); + REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554); + REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007); - /* - * Ignore ah->ah_config.pcie_clock_req setting for - * pre-AR9280 11n - */ - REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff); + /* Load the new settings */ + REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); + } - REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40); - REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554); - REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007); + udelay(1000); - /* Load the new settings */ - REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); - } + /* set bit 19 to allow forcing of pcie core into L1 state */ + REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); - udelay(1000); + /* Several PCIe massages to ensure proper behaviour */ + if (ah->config.pcie_waen) { + val = ah->config.pcie_waen; + if (!power_off) + val &= (~AR_WA_D3_L1_DISABLE); + } else { + if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || + AR_SREV_9287(ah)) { + val = AR9285_WA_DEFAULT; + if (!power_off) + val &= (~AR_WA_D3_L1_DISABLE); + } else if (AR_SREV_9280(ah)) { + /* + * On AR9280 chips bit 22 of 0x4004 needs to be + * set otherwise card may disappear. + */ + val = AR9280_WA_DEFAULT; + if (!power_off) + val &= (~AR_WA_D3_L1_DISABLE); + } else + val = AR_WA_DEFAULT; + } - /* set bit 19 to allow forcing of pcie core into L1 state */ - REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); + REG_WRITE(ah, AR_WA, val); + } - /* Several PCIe massages to ensure proper behaviour */ - if (ah->config.pcie_waen) { - REG_WRITE(ah, AR_WA, ah->config.pcie_waen); - } else { - if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah)) - REG_WRITE(ah, AR_WA, AR9285_WA_DEFAULT); + if (power_off) { /* - * On AR9280 chips bit 22 of 0x4004 needs to be set to - * otherwise card may disappear. + * Set PCIe workaround bits + * bit 14 in WA register (disable L1) should only + * be set when device enters D3 and be cleared + * when device comes back to D0. */ - else if (AR_SREV_9280(ah)) - REG_WRITE(ah, AR_WA, AR9280_WA_DEFAULT); - else - REG_WRITE(ah, AR_WA, AR_WA_DEFAULT); + if (ah->config.pcie_waen) { + if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE) + REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE); + } else { + if (((AR_SREV_9285(ah) || AR_SREV_9271(ah) || + AR_SREV_9287(ah)) && + (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) || + (AR_SREV_9280(ah) && + (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) { + REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE); + } + } } } @@ -3652,15 +3700,7 @@ void ath9k_hw_fill_cap_info(struct ath_hw *ah) } #endif - if ((ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCI) || - (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCIE) || - (ah->hw_version.macVersion == AR_SREV_VERSION_9160) || - (ah->hw_version.macVersion == AR_SREV_VERSION_9100) || - (ah->hw_version.macVersion == AR_SREV_VERSION_9280) || - (ah->hw_version.macVersion == AR_SREV_VERSION_9285)) - pCap->hw_caps &= ~ATH9K_HW_CAP_AUTOSLEEP; - else - pCap->hw_caps |= ATH9K_HW_CAP_AUTOSLEEP; + pCap->hw_caps &= ~ATH9K_HW_CAP_AUTOSLEEP; if (AR_SREV_9280(ah) || AR_SREV_9285(ah)) pCap->hw_caps &= ~ATH9K_HW_CAP_4KB_SPLITTRANS; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 9106a0b537d..b8923457182 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -106,7 +106,7 @@ #define AH_TSF_WRITE_TIMEOUT 100 /* (us) */ #define AH_TIME_QUANTUM 10 #define AR_KEYTABLE_SIZE 128 -#define POWER_UP_TIME 200000 +#define POWER_UP_TIME 10000 #define SPUR_RSSI_THRESH 40 #define CAB_TIMEOUT_VAL 10 @@ -650,7 +650,7 @@ void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah, const struct ath9k_beacon_state *bs); bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode); -void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore); +void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off); /* Interrupt Handling */ bool ath9k_hw_intrpend(struct ath_hw *ah); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 3dc7b5a13e6..52bed89063d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1131,7 +1131,7 @@ void ath_radio_enable(struct ath_softc *sc) int r; ath9k_ps_wakeup(sc); - ath9k_hw_configpcipowersave(ah, 0); + ath9k_hw_configpcipowersave(ah, 0, 0); if (!ah->curchan) ah->curchan = ath_get_curchannel(sc, sc->hw); @@ -1202,7 +1202,7 @@ void ath_radio_disable(struct ath_softc *sc) spin_unlock_bh(&sc->sc_resetlock); ath9k_hw_phy_disable(ah); - ath9k_hw_configpcipowersave(ah, 1); + ath9k_hw_configpcipowersave(ah, 1, 1); ath9k_ps_restore(sc); ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP); } @@ -1226,11 +1226,6 @@ static void ath9k_rfkill_poll_state(struct ieee80211_hw *hw) bool blocked = !!ath_is_rfkill_set(sc); wiphy_rfkill_set_hw_state(hw->wiphy, blocked); - - if (blocked) - ath_radio_disable(sc); - else - ath_radio_enable(sc); } static void ath_start_rfkill_poll(struct ath_softc *sc) @@ -1260,6 +1255,7 @@ void ath_detach(struct ath_softc *sc) DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n"); ath_deinit_leds(sc); + wiphy_rfkill_stop_polling(sc->hw->wiphy); for (i = 0; i < sc->num_sec_wiphy; i++) { struct ath_wiphy *aphy = sc->sec_wiphy[i]; @@ -1942,7 +1938,7 @@ static int ath9k_start(struct ieee80211_hw *hw) init_channel = ath_get_curchannel(sc, hw); /* Reset SERDES registers */ - ath9k_hw_configpcipowersave(sc->sc_ah, 0); + ath9k_hw_configpcipowersave(sc->sc_ah, 0, 0); /* * The basic interface to setting the hardware in a good @@ -2166,11 +2162,9 @@ static void ath9k_stop(struct ieee80211_hw *hw) } else sc->rx.rxlink = NULL; - wiphy_rfkill_stop_polling(sc->hw->wiphy); - /* disable HAL and put h/w to sleep */ ath9k_hw_disable(sc->sc_ah); - ath9k_hw_configpcipowersave(sc->sc_ah, 1); + ath9k_hw_configpcipowersave(sc->sc_ah, 1, 1); ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP); sc->sc_flags |= SC_OP_INVALID; diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index e5c29eb86e8..d83b77f821e 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -676,8 +676,9 @@ #define AR_RC_HOSTIF 0x00000100 #define AR_WA 0x4004 +#define AR_WA_D3_L1_DISABLE (1 << 14) #define AR9285_WA_DEFAULT 0x004a05cb -#define AR9280_WA_DEFAULT 0x0040073f +#define AR9280_WA_DEFAULT 0x0040073b #define AR_WA_DEFAULT 0x0000073f diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 83e38134acc..54ea61c15d8 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -61,11 +61,28 @@ config B43_PCMCIA If unsure, say N. +config B43_SDIO + bool "Broadcom 43xx SDIO device support (EXPERIMENTAL)" + depends on B43 && SSB_SDIOHOST_POSSIBLE && EXPERIMENTAL + select SSB_SDIOHOST + ---help--- + Broadcom 43xx device support for Soft-MAC SDIO devices. + + With this config option you can drive Soft-MAC b43 cards with a + Secure Digital I/O interface. + This includes the WLAN daughter card found on the Nintendo Wii + video game console. + Note that this does not support Broadcom 43xx Full-MAC devices. + + It's safe to select Y here, even if you don't have a B43 SDIO device. + + If unsure, say N. + # Data transfers to the device via PIO -# This is only needed on PCMCIA devices. All others can do DMA properly. +# This is only needed on PCMCIA and SDIO devices. All others can do DMA properly. config B43_PIO bool - depends on B43 && (B43_PCMCIA || B43_FORCE_PIO) + depends on B43 && (B43_SDIO || B43_PCMCIA || B43_FORCE_PIO) select SSB_BLOCKIO default y diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile index da379f4b0c3..84772a2542d 100644 --- a/drivers/net/wireless/b43/Makefile +++ b/drivers/net/wireless/b43/Makefile @@ -16,6 +16,7 @@ b43-$(CONFIG_B43_PIO) += pio.o b43-y += rfkill.o b43-$(CONFIG_B43_LEDS) += leds.o b43-$(CONFIG_B43_PCMCIA) += pcmcia.o +b43-$(CONFIG_B43_SDIO) += sdio.o b43-$(CONFIG_B43_DEBUG) += debugfs.o obj-$(CONFIG_B43) += b43.o diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 09cfe68537b..fa1549a03c7 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -629,13 +629,6 @@ struct b43_wl { * from the mac80211 subsystem. */ u16 mac80211_initially_registered_queues; - /* R/W lock for data transmission. - * Transmissions on 2+ queues can run concurrently, but somebody else - * might sync with TX by write_lock_irqsave()'ing. */ - rwlock_t tx_lock; - /* Lock for LEDs access. */ - spinlock_t leds_lock; - /* We can only have one operating interface (802.11 core) * at a time. General information about this interface follows. */ @@ -686,6 +679,9 @@ struct b43_wl { struct work_struct tx_work; /* Queue of packets to be transmitted. */ struct sk_buff_head tx_queue; + + /* The device LEDs. */ + struct b43_leds leds; }; /* The type of the firmware file. */ @@ -768,13 +764,10 @@ struct b43_wldev { /* The device initialization status. * Use b43_status() to query. */ atomic_t __init_status; - /* Saved init status for handling suspend. */ - int suspend_init_status; bool bad_frames_preempt; /* Use "Bad Frames Preemption" (default off) */ bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM) */ bool radio_hw_enable; /* saved state of radio hardware enabled state */ - bool suspend_in_progress; /* TRUE, if we are in a suspend/resume cycle */ bool qos_enabled; /* TRUE, if QoS is used. */ bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */ @@ -794,12 +787,6 @@ struct b43_wldev { /* Various statistics about the physical device. */ struct b43_stats stats; - /* The device LEDs. */ - struct b43_led led_tx; - struct b43_led led_rx; - struct b43_led led_assoc; - struct b43_led led_radio; - /* Reason code of the last interrupt. */ u32 irq_reason; u32 dma_reason[6]; @@ -830,6 +817,10 @@ struct b43_wldev { /* Debugging stuff follows. */ #ifdef CONFIG_B43_DEBUG struct b43_dfsentry *dfsentry; + unsigned int irq_count; + unsigned int irq_bit_count[32]; + unsigned int tx_count; + unsigned int rx_count; #endif }; diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index 8f64943e3f6..80b19a44a40 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -689,6 +689,7 @@ static void b43_add_dynamic_debug(struct b43_wldev *dev) add_dyn_dbg("debug_lo", B43_DBG_LO, 0); add_dyn_dbg("debug_firmware", B43_DBG_FIRMWARE, 0); add_dyn_dbg("debug_keys", B43_DBG_KEYS, 0); + add_dyn_dbg("debug_verbose_stats", B43_DBG_VERBOSESTATS, 0); #undef add_dyn_dbg } diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h index e47b4b488b0..822aad8842f 100644 --- a/drivers/net/wireless/b43/debugfs.h +++ b/drivers/net/wireless/b43/debugfs.h @@ -13,6 +13,7 @@ enum b43_dyndbg { /* Dynamic debugging features */ B43_DBG_LO, B43_DBG_FIRMWARE, B43_DBG_KEYS, + B43_DBG_VERBOSESTATS, __B43_NR_DYNDBG, }; diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index a467ee260a1..8701034569f 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1428,9 +1428,9 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, ring->nr_failed_tx_packets++; ring->nr_total_packet_tries += status->frame_count; #endif /* DEBUG */ - ieee80211_tx_status_irqsafe(dev->wl->hw, meta->skb); + ieee80211_tx_status(dev->wl->hw, meta->skb); - /* skb is freed by ieee80211_tx_status_irqsafe() */ + /* skb is freed by ieee80211_tx_status() */ meta->skb = NULL; } else { /* No need to call free_descriptor_buffer here, as diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c index c8b317094c3..fbe3d4f62ce 100644 --- a/drivers/net/wireless/b43/leds.c +++ b/drivers/net/wireless/b43/leds.c @@ -34,57 +34,88 @@ static void b43_led_turn_on(struct b43_wldev *dev, u8 led_index, bool activelow) { - struct b43_wl *wl = dev->wl; - unsigned long flags; u16 ctl; - spin_lock_irqsave(&wl->leds_lock, flags); ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL); if (activelow) ctl &= ~(1 << led_index); else ctl |= (1 << led_index); b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl); - spin_unlock_irqrestore(&wl->leds_lock, flags); } static void b43_led_turn_off(struct b43_wldev *dev, u8 led_index, bool activelow) { - struct b43_wl *wl = dev->wl; - unsigned long flags; u16 ctl; - spin_lock_irqsave(&wl->leds_lock, flags); ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL); if (activelow) ctl |= (1 << led_index); else ctl &= ~(1 << led_index); b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl); - spin_unlock_irqrestore(&wl->leds_lock, flags); } -/* Callback from the LED subsystem. */ -static void b43_led_brightness_set(struct led_classdev *led_dev, - enum led_brightness brightness) +static void b43_led_update(struct b43_wldev *dev, + struct b43_led *led) { - struct b43_led *led = container_of(led_dev, struct b43_led, led_dev); - struct b43_wldev *dev = led->dev; bool radio_enabled; + bool turn_on; - if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) + if (!led->wl) return; - /* Checking the radio-enabled status here is slightly racy, - * but we want to avoid the locking overhead and we don't care - * whether the LED has the wrong state for a second. */ radio_enabled = (dev->phy.radio_on && dev->radio_hw_enable); - if (brightness == LED_OFF || !radio_enabled) - b43_led_turn_off(dev, led->index, led->activelow); + /* The led->state read is racy, but we don't care. In case we raced + * with the brightness_set handler, we will be called again soon + * to fixup our state. */ + if (radio_enabled) + turn_on = atomic_read(&led->state) != LED_OFF; else + turn_on = 0; + if (turn_on == led->hw_state) + return; + led->hw_state = turn_on; + + if (turn_on) b43_led_turn_on(dev, led->index, led->activelow); + else + b43_led_turn_off(dev, led->index, led->activelow); +} + +static void b43_leds_work(struct work_struct *work) +{ + struct b43_leds *leds = container_of(work, struct b43_leds, work); + struct b43_wl *wl = container_of(leds, struct b43_wl, leds); + struct b43_wldev *dev; + + mutex_lock(&wl->mutex); + dev = wl->current_dev; + if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED)) + goto out_unlock; + + b43_led_update(dev, &wl->leds.led_tx); + b43_led_update(dev, &wl->leds.led_rx); + b43_led_update(dev, &wl->leds.led_radio); + b43_led_update(dev, &wl->leds.led_assoc); + +out_unlock: + mutex_unlock(&wl->mutex); +} + +/* Callback from the LED subsystem. */ +static void b43_led_brightness_set(struct led_classdev *led_dev, + enum led_brightness brightness) +{ + struct b43_led *led = container_of(led_dev, struct b43_led, led_dev); + struct b43_wl *wl = led->wl; + + if (likely(!wl->leds.stop)) { + atomic_set(&led->state, brightness); + ieee80211_queue_work(wl->hw, &wl->leds.work); + } } static int b43_register_led(struct b43_wldev *dev, struct b43_led *led, @@ -93,15 +124,15 @@ static int b43_register_led(struct b43_wldev *dev, struct b43_led *led, { int err; - b43_led_turn_off(dev, led_index, activelow); - if (led->dev) + if (led->wl) return -EEXIST; if (!default_trigger) return -EINVAL; - led->dev = dev; + led->wl = dev->wl; led->index = led_index; led->activelow = activelow; strncpy(led->name, name, sizeof(led->name)); + atomic_set(&led->state, 0); led->led_dev.name = led->name; led->led_dev.default_trigger = default_trigger; @@ -110,19 +141,19 @@ static int b43_register_led(struct b43_wldev *dev, struct b43_led *led, err = led_classdev_register(dev->dev->dev, &led->led_dev); if (err) { b43warn(dev->wl, "LEDs: Failed to register %s\n", name); - led->dev = NULL; + led->wl = NULL; return err; } + return 0; } static void b43_unregister_led(struct b43_led *led) { - if (!led->dev) + if (!led->wl) return; led_classdev_unregister(&led->led_dev); - b43_led_turn_off(led->dev, led->index, led->activelow); - led->dev = NULL; + led->wl = NULL; } static void b43_map_led(struct b43_wldev *dev, @@ -137,24 +168,20 @@ static void b43_map_led(struct b43_wldev *dev, * generic LED triggers. */ switch (behaviour) { case B43_LED_INACTIVE: - break; case B43_LED_OFF: - b43_led_turn_off(dev, led_index, activelow); - break; case B43_LED_ON: - b43_led_turn_on(dev, led_index, activelow); break; case B43_LED_ACTIVITY: case B43_LED_TRANSFER: case B43_LED_APTRANSFER: snprintf(name, sizeof(name), "b43-%s::tx", wiphy_name(hw->wiphy)); - b43_register_led(dev, &dev->led_tx, name, + b43_register_led(dev, &dev->wl->leds.led_tx, name, ieee80211_get_tx_led_name(hw), led_index, activelow); snprintf(name, sizeof(name), "b43-%s::rx", wiphy_name(hw->wiphy)); - b43_register_led(dev, &dev->led_rx, name, + b43_register_led(dev, &dev->wl->leds.led_rx, name, ieee80211_get_rx_led_name(hw), led_index, activelow); break; @@ -164,18 +191,15 @@ static void b43_map_led(struct b43_wldev *dev, case B43_LED_MODE_BG: snprintf(name, sizeof(name), "b43-%s::radio", wiphy_name(hw->wiphy)); - b43_register_led(dev, &dev->led_radio, name, + b43_register_led(dev, &dev->wl->leds.led_radio, name, ieee80211_get_radio_led_name(hw), led_index, activelow); - /* Sync the RF-kill LED state with radio and switch states. */ - if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev)) - b43_led_turn_on(dev, led_index, activelow); break; case B43_LED_WEIRD: case B43_LED_ASSOC: snprintf(name, sizeof(name), "b43-%s::assoc", wiphy_name(hw->wiphy)); - b43_register_led(dev, &dev->led_assoc, name, + b43_register_led(dev, &dev->wl->leds.led_assoc, name, ieee80211_get_assoc_led_name(hw), led_index, activelow); break; @@ -186,58 +210,150 @@ static void b43_map_led(struct b43_wldev *dev, } } -void b43_leds_init(struct b43_wldev *dev) +static void b43_led_get_sprominfo(struct b43_wldev *dev, + unsigned int led_index, + enum b43_led_behaviour *behaviour, + bool *activelow) { struct ssb_bus *bus = dev->dev->bus; u8 sprom[4]; - int i; - enum b43_led_behaviour behaviour; - bool activelow; sprom[0] = bus->sprom.gpio0; sprom[1] = bus->sprom.gpio1; sprom[2] = bus->sprom.gpio2; sprom[3] = bus->sprom.gpio3; - for (i = 0; i < 4; i++) { - if (sprom[i] == 0xFF) { - /* There is no LED information in the SPROM - * for this LED. Hardcode it here. */ - activelow = 0; - switch (i) { - case 0: - behaviour = B43_LED_ACTIVITY; - activelow = 1; - if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ) - behaviour = B43_LED_RADIO_ALL; - break; - case 1: - behaviour = B43_LED_RADIO_B; - if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK) - behaviour = B43_LED_ASSOC; - break; - case 2: - behaviour = B43_LED_RADIO_A; - break; - case 3: - behaviour = B43_LED_OFF; - break; - default: - B43_WARN_ON(1); - return; - } + if (sprom[led_index] == 0xFF) { + /* There is no LED information in the SPROM + * for this LED. Hardcode it here. */ + *activelow = 0; + switch (led_index) { + case 0: + *behaviour = B43_LED_ACTIVITY; + *activelow = 1; + if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ) + *behaviour = B43_LED_RADIO_ALL; + break; + case 1: + *behaviour = B43_LED_RADIO_B; + if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK) + *behaviour = B43_LED_ASSOC; + break; + case 2: + *behaviour = B43_LED_RADIO_A; + break; + case 3: + *behaviour = B43_LED_OFF; + break; + default: + B43_WARN_ON(1); + return; + } + } else { + *behaviour = sprom[led_index] & B43_LED_BEHAVIOUR; + *activelow = !!(sprom[led_index] & B43_LED_ACTIVELOW); + } +} + +void b43_leds_init(struct b43_wldev *dev) +{ + struct b43_led *led; + unsigned int i; + enum b43_led_behaviour behaviour; + bool activelow; + + /* Sync the RF-kill LED state (if we have one) with radio and switch states. */ + led = &dev->wl->leds.led_radio; + if (led->wl) { + if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev)) { + b43_led_turn_on(dev, led->index, led->activelow); + led->hw_state = 1; + atomic_set(&led->state, 1); } else { - behaviour = sprom[i] & B43_LED_BEHAVIOUR; - activelow = !!(sprom[i] & B43_LED_ACTIVELOW); + b43_led_turn_off(dev, led->index, led->activelow); + led->hw_state = 0; + atomic_set(&led->state, 0); } - b43_map_led(dev, i, behaviour, activelow); } + + /* Initialize TX/RX/ASSOC leds */ + led = &dev->wl->leds.led_tx; + if (led->wl) { + b43_led_turn_off(dev, led->index, led->activelow); + led->hw_state = 0; + atomic_set(&led->state, 0); + } + led = &dev->wl->leds.led_rx; + if (led->wl) { + b43_led_turn_off(dev, led->index, led->activelow); + led->hw_state = 0; + atomic_set(&led->state, 0); + } + led = &dev->wl->leds.led_assoc; + if (led->wl) { + b43_led_turn_off(dev, led->index, led->activelow); + led->hw_state = 0; + atomic_set(&led->state, 0); + } + + /* Initialize other LED states. */ + for (i = 0; i < B43_MAX_NR_LEDS; i++) { + b43_led_get_sprominfo(dev, i, &behaviour, &activelow); + switch (behaviour) { + case B43_LED_OFF: + b43_led_turn_off(dev, i, activelow); + break; + case B43_LED_ON: + b43_led_turn_on(dev, i, activelow); + break; + default: + /* Leave others as-is. */ + break; + } + } + + dev->wl->leds.stop = 0; } void b43_leds_exit(struct b43_wldev *dev) { - b43_unregister_led(&dev->led_tx); - b43_unregister_led(&dev->led_rx); - b43_unregister_led(&dev->led_assoc); - b43_unregister_led(&dev->led_radio); + struct b43_leds *leds = &dev->wl->leds; + + b43_led_turn_off(dev, leds->led_tx.index, leds->led_tx.activelow); + b43_led_turn_off(dev, leds->led_rx.index, leds->led_rx.activelow); + b43_led_turn_off(dev, leds->led_assoc.index, leds->led_assoc.activelow); + b43_led_turn_off(dev, leds->led_radio.index, leds->led_radio.activelow); +} + +void b43_leds_stop(struct b43_wldev *dev) +{ + struct b43_leds *leds = &dev->wl->leds; + + leds->stop = 1; + cancel_work_sync(&leds->work); +} + +void b43_leds_register(struct b43_wldev *dev) +{ + unsigned int i; + enum b43_led_behaviour behaviour; + bool activelow; + + INIT_WORK(&dev->wl->leds.work, b43_leds_work); + + /* Register the LEDs to the LED subsystem. */ + for (i = 0; i < B43_MAX_NR_LEDS; i++) { + b43_led_get_sprominfo(dev, i, &behaviour, &activelow); + b43_map_led(dev, i, behaviour, activelow); + } +} + +void b43_leds_unregister(struct b43_wldev *dev) +{ + struct b43_leds *leds = &dev->wl->leds; + + b43_unregister_led(&leds->led_tx); + b43_unregister_led(&leds->led_rx); + b43_unregister_led(&leds->led_assoc); + b43_unregister_led(&leds->led_radio); } diff --git a/drivers/net/wireless/b43/leds.h b/drivers/net/wireless/b43/leds.h index b8b1dd52124..9592e4c5a5f 100644 --- a/drivers/net/wireless/b43/leds.h +++ b/drivers/net/wireless/b43/leds.h @@ -7,12 +7,13 @@ struct b43_wldev; #include <linux/types.h> #include <linux/leds.h> +#include <linux/workqueue.h> #define B43_LED_MAX_NAME_LEN 31 struct b43_led { - struct b43_wldev *dev; + struct b43_wl *wl; /* The LED class device */ struct led_classdev led_dev; /* The index number of the LED. */ @@ -22,8 +23,24 @@ struct b43_led { bool activelow; /* The unique name string for this LED device. */ char name[B43_LED_MAX_NAME_LEN + 1]; + /* The current status of the LED. This is updated locklessly. */ + atomic_t state; + /* The active state in hardware. */ + bool hw_state; }; +struct b43_leds { + struct b43_led led_tx; + struct b43_led led_rx; + struct b43_led led_radio; + struct b43_led led_assoc; + + bool stop; + struct work_struct work; +}; + +#define B43_MAX_NR_LEDS 4 + #define B43_LED_BEHAVIOUR 0x7F #define B43_LED_ACTIVELOW 0x80 /* LED behaviour values */ @@ -42,23 +59,35 @@ enum b43_led_behaviour { B43_LED_INACTIVE, }; +void b43_leds_register(struct b43_wldev *dev); +void b43_leds_unregister(struct b43_wldev *dev); void b43_leds_init(struct b43_wldev *dev); void b43_leds_exit(struct b43_wldev *dev); +void b43_leds_stop(struct b43_wldev *dev); #else /* CONFIG_B43_LEDS */ /* LED support disabled */ -struct b43_led { +struct b43_leds { /* empty */ }; +static inline void b43_leds_register(struct b43_wldev *dev) +{ +} +static inline void b43_leds_unregister(struct b43_wldev *dev) +{ +} static inline void b43_leds_init(struct b43_wldev *dev) { } static inline void b43_leds_exit(struct b43_wldev *dev) { } +static inline void b43_leds_stop(struct b43_wldev *dev) +{ +} #endif /* CONFIG_B43_LEDS */ #endif /* B43_LEDS_H_ */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index e789792a36b..9b907a36bb8 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -8,6 +8,9 @@ Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org> Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> + SDIO support + Copyright (c) 2009 Albert Herranz <albert_herranz@yahoo.es> + Some parts of the code in this file are derived from the ipw2200 driver Copyright(c) 2003 - 2004 Intel Corporation. @@ -53,6 +56,8 @@ #include "xmit.h" #include "lo.h" #include "pcmcia.h" +#include "sdio.h" +#include <linux/mmc/sdio_func.h> MODULE_DESCRIPTION("Broadcom B43 wireless driver"); MODULE_AUTHOR("Martin Langer"); @@ -1587,7 +1592,7 @@ static void b43_beacon_update_trigger_work(struct work_struct *work) mutex_lock(&wl->mutex); dev = wl->current_dev; if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) { - if (0 /*FIXME dev->dev->bus->bustype == SSB_BUSTYPE_SDIO*/) { + if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) { /* wl->mutex is enough. */ b43_do_beacon_update_trigger_work(dev); mmiowb(); @@ -1825,6 +1830,16 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev) /* Re-enable interrupts on the device by restoring the current interrupt mask. */ b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask); + +#if B43_DEBUG + if (b43_debug(dev, B43_DBG_VERBOSESTATS)) { + dev->irq_count++; + for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) { + if (reason & (1 << i)) + dev->irq_bit_count[i]++; + } + } +#endif } /* Interrupt thread handler. Handles device interrupts in thread context. */ @@ -1905,6 +1920,21 @@ static irqreturn_t b43_interrupt_handler(int irq, void *dev_id) return ret; } +/* SDIO interrupt handler. This runs in process context. */ +static void b43_sdio_interrupt_handler(struct b43_wldev *dev) +{ + struct b43_wl *wl = dev->wl; + irqreturn_t ret; + + mutex_lock(&wl->mutex); + + ret = b43_do_interrupt(dev); + if (ret == IRQ_WAKE_THREAD) + b43_do_interrupt_thread(dev); + + mutex_unlock(&wl->mutex); +} + void b43_do_release_fw(struct b43_firmware_file *fw) { release_firmware(fw->data); @@ -2645,6 +2675,20 @@ static void b43_adjust_opmode(struct b43_wldev *dev) cfp_pretbtt = 50; } b43_write16(dev, 0x612, cfp_pretbtt); + + /* FIXME: We don't currently implement the PMQ mechanism, + * so always disable it. If we want to implement PMQ, + * we need to enable it here (clear DISCPMQ) in AP mode. + */ + if (0 /* ctl & B43_MACCTL_AP */) { + b43_write32(dev, B43_MMIO_MACCTL, + b43_read32(dev, B43_MMIO_MACCTL) + & ~B43_MACCTL_DISCPMQ); + } else { + b43_write32(dev, B43_MMIO_MACCTL, + b43_read32(dev, B43_MMIO_MACCTL) + | B43_MACCTL_DISCPMQ); + } } static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm) @@ -2873,6 +2917,27 @@ static void b43_periodic_every15sec(struct b43_wldev *dev) atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); wmb(); + +#if B43_DEBUG + if (b43_debug(dev, B43_DBG_VERBOSESTATS)) { + unsigned int i; + + b43dbg(dev->wl, "Stats: %7u IRQs/sec, %7u TX/sec, %7u RX/sec\n", + dev->irq_count / 15, + dev->tx_count / 15, + dev->rx_count / 15); + dev->irq_count = 0; + dev->tx_count = 0; + dev->rx_count = 0; + for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) { + if (dev->irq_bit_count[i]) { + b43dbg(dev->wl, "Stats: %7u IRQ-%02u/sec (0x%08X)\n", + dev->irq_bit_count[i] / 15, i, (1 << i)); + dev->irq_bit_count[i] = 0; + } + } + } +#endif } static void do_periodic_work(struct b43_wldev *dev) @@ -3002,14 +3067,18 @@ static void b43_security_init(struct b43_wldev *dev) static int b43_rng_read(struct hwrng *rng, u32 *data) { struct b43_wl *wl = (struct b43_wl *)rng->priv; + struct b43_wldev *dev; + int count = -ENODEV; - /* FIXME: We need to take wl->mutex here to make sure the device - * is not going away from under our ass. However it could deadlock - * with hwrng internal locking. */ - - *data = b43_read16(wl->current_dev, B43_MMIO_RNG); + mutex_lock(&wl->mutex); + dev = wl->current_dev; + if (likely(dev && b43_status(dev) >= B43_STAT_INITIALIZED)) { + *data = b43_read16(dev, B43_MMIO_RNG); + count = sizeof(u16); + } + mutex_unlock(&wl->mutex); - return (sizeof(u16)); + return count; } #endif /* CONFIG_B43_HWRNG */ @@ -3068,6 +3137,9 @@ static void b43_tx_work(struct work_struct *work) dev_kfree_skb(skb); /* Drop it */ } +#if B43_DEBUG + dev->tx_count++; +#endif mutex_unlock(&wl->mutex); } @@ -3820,7 +3892,7 @@ redo: /* Disable interrupts on the device. */ b43_set_status(dev, B43_STAT_INITIALIZED); - if (0 /*FIXME dev->dev->bus->bustype == SSB_BUSTYPE_SDIO*/) { + if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) { /* wl->mutex is locked. That is enough. */ b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0); b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */ @@ -3830,10 +3902,15 @@ redo: b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */ spin_unlock_irq(&wl->hardirq_lock); } - /* Synchronize the interrupt handlers. Unlock to avoid deadlocks. */ + /* Synchronize and free the interrupt handlers. Unlock to avoid deadlocks. */ orig_dev = dev; mutex_unlock(&wl->mutex); - synchronize_irq(dev->dev->irq); + if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) { + b43_sdio_free_irq(dev); + } else { + synchronize_irq(dev->dev->irq); + free_irq(dev->dev->irq, dev); + } mutex_lock(&wl->mutex); dev = wl->current_dev; if (!dev) @@ -3850,7 +3927,7 @@ redo: dev_kfree_skb(skb_dequeue(&wl->tx_queue)); b43_mac_suspend(dev); - free_irq(dev->dev->irq, dev); + b43_leds_exit(dev); b43dbg(wl, "Wireless interface stopped\n"); return dev; @@ -3864,12 +3941,20 @@ static int b43_wireless_core_start(struct b43_wldev *dev) B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED); drain_txstatus_queue(dev); - err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler, - b43_interrupt_thread_handler, - IRQF_SHARED, KBUILD_MODNAME, dev); - if (err) { - b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq); - goto out; + if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) { + err = b43_sdio_request_irq(dev, b43_sdio_interrupt_handler); + if (err) { + b43err(dev->wl, "Cannot request SDIO IRQ\n"); + goto out; + } + } else { + err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler, + b43_interrupt_thread_handler, + IRQF_SHARED, KBUILD_MODNAME, dev); + if (err) { + b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq); + goto out; + } } /* We are ready to run. */ @@ -3882,8 +3967,10 @@ static int b43_wireless_core_start(struct b43_wldev *dev) /* Start maintainance work */ b43_periodic_tasks_setup(dev); + b43_leds_init(dev); + b43dbg(dev->wl, "Wireless interface started\n"); - out: +out: return err; } @@ -4160,10 +4247,6 @@ static void b43_wireless_core_exit(struct b43_wldev *dev) macctl |= B43_MACCTL_PSM_JMP0; b43_write32(dev, B43_MMIO_MACCTL, macctl); - if (!dev->suspend_in_progress) { - b43_leds_exit(dev); - b43_rng_exit(dev->wl); - } b43_dma_free(dev); b43_pio_free(dev); b43_chip_exit(dev); @@ -4180,7 +4263,6 @@ static void b43_wireless_core_exit(struct b43_wldev *dev) /* Initialize a wireless core */ static int b43_wireless_core_init(struct b43_wldev *dev) { - struct b43_wl *wl = dev->wl; struct ssb_bus *bus = dev->dev->bus; struct ssb_sprom *sprom = &bus->sprom; struct b43_phy *phy = &dev->phy; @@ -4264,7 +4346,9 @@ static int b43_wireless_core_init(struct b43_wldev *dev) /* Maximum Contention Window */ b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF); - if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) || B43_FORCE_PIO) { + if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) || + (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) || + B43_FORCE_PIO) { dev->__using_pio_transfers = 1; err = b43_pio_init(dev); } else { @@ -4280,15 +4364,13 @@ static int b43_wireless_core_init(struct b43_wldev *dev) ssb_bus_powerup(bus, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)); b43_upload_card_macaddress(dev); b43_security_init(dev); - if (!dev->suspend_in_progress) - b43_rng_init(wl); + + ieee80211_wake_queues(dev->wl->hw); ieee80211_wake_queues(dev->wl->hw); b43_set_status(dev, B43_STAT_INITIALIZED); - if (!dev->suspend_in_progress) - b43_leds_init(dev); out: return err; @@ -4837,7 +4919,6 @@ static int b43_wireless_init(struct ssb_device *dev) /* Initialize struct b43_wl */ wl->hw = hw; - spin_lock_init(&wl->leds_lock); mutex_init(&wl->mutex); spin_lock_init(&wl->hardirq_lock); INIT_LIST_HEAD(&wl->devlist); @@ -4878,6 +4959,8 @@ static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id) err = ieee80211_register_hw(wl->hw); if (err) goto err_one_core_detach; + b43_leds_register(wl->current_dev); + b43_rng_init(wl); } out: @@ -4906,12 +4989,15 @@ static void b43_remove(struct ssb_device *dev) * might have modified it. Restoring is important, so the networking * stack can properly free resources. */ wl->hw->queues = wl->mac80211_initially_registered_queues; + b43_leds_stop(wldev); ieee80211_unregister_hw(wl->hw); } b43_one_core_detach(dev); if (list_empty(&wl->devlist)) { + b43_rng_exit(wl); + b43_leds_unregister(wldev); /* Last core on the chip unregistered. * We can destroy common struct b43_wl. */ @@ -4929,80 +5015,17 @@ void b43_controller_restart(struct b43_wldev *dev, const char *reason) ieee80211_queue_work(dev->wl->hw, &dev->restart_work); } -#ifdef CONFIG_PM - -static int b43_suspend(struct ssb_device *dev, pm_message_t state) -{ - struct b43_wldev *wldev = ssb_get_drvdata(dev); - struct b43_wl *wl = wldev->wl; - - b43dbg(wl, "Suspending...\n"); - - mutex_lock(&wl->mutex); - wldev->suspend_in_progress = true; - wldev->suspend_init_status = b43_status(wldev); - if (wldev->suspend_init_status >= B43_STAT_STARTED) - wldev = b43_wireless_core_stop(wldev); - if (wldev && wldev->suspend_init_status >= B43_STAT_INITIALIZED) - b43_wireless_core_exit(wldev); - mutex_unlock(&wl->mutex); - - b43dbg(wl, "Device suspended.\n"); - - return 0; -} - -static int b43_resume(struct ssb_device *dev) -{ - struct b43_wldev *wldev = ssb_get_drvdata(dev); - struct b43_wl *wl = wldev->wl; - int err = 0; - - b43dbg(wl, "Resuming...\n"); - - mutex_lock(&wl->mutex); - if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) { - err = b43_wireless_core_init(wldev); - if (err) { - b43err(wl, "Resume failed at core init\n"); - goto out; - } - } - if (wldev->suspend_init_status >= B43_STAT_STARTED) { - err = b43_wireless_core_start(wldev); - if (err) { - b43_leds_exit(wldev); - b43_rng_exit(wldev->wl); - b43_wireless_core_exit(wldev); - b43err(wl, "Resume failed at core start\n"); - goto out; - } - } - b43dbg(wl, "Device resumed.\n"); - out: - wldev->suspend_in_progress = false; - mutex_unlock(&wl->mutex); - return err; -} - -#else /* CONFIG_PM */ -# define b43_suspend NULL -# define b43_resume NULL -#endif /* CONFIG_PM */ - static struct ssb_driver b43_ssb_driver = { .name = KBUILD_MODNAME, .id_table = b43_ssb_tbl, .probe = b43_probe, .remove = b43_remove, - .suspend = b43_suspend, - .resume = b43_resume, }; static void b43_print_driverinfo(void) { const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "", - *feat_leds = ""; + *feat_leds = "", *feat_sdio = ""; #ifdef CONFIG_B43_PCI_AUTOSELECT feat_pci = "P"; @@ -5016,11 +5039,14 @@ static void b43_print_driverinfo(void) #ifdef CONFIG_B43_LEDS feat_leds = "L"; #endif +#ifdef CONFIG_B43_SDIO + feat_sdio = "S"; +#endif printk(KERN_INFO "Broadcom 43xx driver loaded " - "[ Features: %s%s%s%s, Firmware-ID: " + "[ Features: %s%s%s%s%s, Firmware-ID: " B43_SUPPORTED_FIRMWARE_ID " ]\n", feat_pci, feat_pcmcia, feat_nphy, - feat_leds); + feat_leds, feat_sdio); } static int __init b43_init(void) @@ -5031,13 +5057,18 @@ static int __init b43_init(void) err = b43_pcmcia_init(); if (err) goto err_dfs_exit; - err = ssb_driver_register(&b43_ssb_driver); + err = b43_sdio_init(); if (err) goto err_pcmcia_exit; + err = ssb_driver_register(&b43_ssb_driver); + if (err) + goto err_sdio_exit; b43_print_driverinfo(); return err; +err_sdio_exit: + b43_sdio_exit(); err_pcmcia_exit: b43_pcmcia_exit(); err_dfs_exit: @@ -5048,6 +5079,7 @@ err_dfs_exit: static void __exit b43_exit(void) { ssb_driver_unregister(&b43_ssb_driver); + b43_sdio_exit(); b43_pcmcia_exit(); b43_debugfs_exit(); } diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c index 3e02d969f68..1e318d815a5 100644 --- a/drivers/net/wireless/b43/phy_lp.c +++ b/drivers/net/wireless/b43/phy_lp.c @@ -2228,6 +2228,16 @@ static enum b43_txpwr_result b43_lpphy_op_recalc_txpower(struct b43_wldev *dev, return B43_TXPWR_RES_DONE; } +void b43_lpphy_op_switch_analog(struct b43_wldev *dev, bool on) +{ + if (on) { + b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xfff8); + } else { + b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0x0007); + b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 0x0007); + } +} + const struct b43_phy_operations b43_phyops_lp = { .allocate = b43_lpphy_op_allocate, .free = b43_lpphy_op_free, @@ -2239,7 +2249,7 @@ const struct b43_phy_operations b43_phyops_lp = { .radio_read = b43_lpphy_op_radio_read, .radio_write = b43_lpphy_op_radio_write, .software_rfkill = b43_lpphy_op_software_rfkill, - .switch_analog = b43_phyop_switch_analog_generic, + .switch_analog = b43_lpphy_op_switch_analog, .switch_channel = b43_lpphy_op_switch_channel, .get_default_chan = b43_lpphy_op_get_default_chan, .set_rx_antenna = b43_lpphy_op_set_rx_antenna, diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c index 3498b68385e..e96091b3149 100644 --- a/drivers/net/wireless/b43/pio.c +++ b/drivers/net/wireless/b43/pio.c @@ -574,7 +574,7 @@ void b43_pio_handle_txstatus(struct b43_wldev *dev, q->buffer_used -= total_len; q->free_packet_slots += 1; - ieee80211_tx_status_irqsafe(dev->wl->hw, pack->skb); + ieee80211_tx_status(dev->wl->hw, pack->skb); pack->skb = NULL; list_add(&pack->list, &q->packets_list); diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 31e55999893..7a3218c5ba7 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -28,7 +28,7 @@ /* Returns TRUE, if the radio is enabled in hardware. */ bool b43_is_hw_radio_enabled(struct b43_wldev *dev) { - if (dev->phy.rev >= 3) { + if (dev->phy.rev >= 3 || dev->phy.type == B43_PHYTYPE_LP) { if (!(b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI) & B43_MMIO_RADIO_HWENABLED_HI_MASK)) return 1; diff --git a/drivers/net/wireless/b43/sdio.c b/drivers/net/wireless/b43/sdio.c new file mode 100644 index 00000000000..0d3ac64147a --- /dev/null +++ b/drivers/net/wireless/b43/sdio.c @@ -0,0 +1,202 @@ +/* + * Broadcom B43 wireless driver + * + * SDIO over Sonics Silicon Backplane bus glue for b43. + * + * Copyright (C) 2009 Albert Herranz + * Copyright (C) 2009 Michael Buesch <mb@bu3sch.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdio_func.h> +#include <linux/mmc/sdio_ids.h> +#include <linux/ssb/ssb.h> + +#include "sdio.h" +#include "b43.h" + + +#define HNBU_CHIPID 0x01 /* vendor & device id */ + +#define B43_SDIO_BLOCK_SIZE 64 /* rx fifo max size in bytes */ + + +static const struct b43_sdio_quirk { + u16 vendor; + u16 device; + unsigned int quirks; +} b43_sdio_quirks[] = { + { 0x14E4, 0x4318, SSB_QUIRK_SDIO_READ_AFTER_WRITE32, }, + { }, +}; + + +static unsigned int b43_sdio_get_quirks(u16 vendor, u16 device) +{ + const struct b43_sdio_quirk *q; + + for (q = b43_sdio_quirks; q->quirks; q++) { + if (vendor == q->vendor && device == q->device) + return q->quirks; + } + + return 0; +} + +static void b43_sdio_interrupt_dispatcher(struct sdio_func *func) +{ + struct b43_sdio *sdio = sdio_get_drvdata(func); + struct b43_wldev *dev = sdio->irq_handler_opaque; + + if (unlikely(b43_status(dev) < B43_STAT_STARTED)) + return; + + sdio_release_host(func); + sdio->irq_handler(dev); + sdio_claim_host(func); +} + +int b43_sdio_request_irq(struct b43_wldev *dev, + void (*handler)(struct b43_wldev *dev)) +{ + struct ssb_bus *bus = dev->dev->bus; + struct sdio_func *func = bus->host_sdio; + struct b43_sdio *sdio = sdio_get_drvdata(func); + int err; + + sdio->irq_handler_opaque = dev; + sdio->irq_handler = handler; + sdio_claim_host(func); + err = sdio_claim_irq(func, b43_sdio_interrupt_dispatcher); + sdio_release_host(func); + + return err; +} + +void b43_sdio_free_irq(struct b43_wldev *dev) +{ + struct ssb_bus *bus = dev->dev->bus; + struct sdio_func *func = bus->host_sdio; + struct b43_sdio *sdio = sdio_get_drvdata(func); + + sdio_claim_host(func); + sdio_release_irq(func); + sdio_release_host(func); + sdio->irq_handler_opaque = NULL; + sdio->irq_handler = NULL; +} + +static int b43_sdio_probe(struct sdio_func *func, + const struct sdio_device_id *id) +{ + struct b43_sdio *sdio; + struct sdio_func_tuple *tuple; + u16 vendor = 0, device = 0; + int error; + + /* Look for the card chip identifier. */ + tuple = func->tuples; + while (tuple) { + switch (tuple->code) { + case 0x80: + switch (tuple->data[0]) { + case HNBU_CHIPID: + if (tuple->size != 5) + break; + vendor = tuple->data[1] | (tuple->data[2]<<8); + device = tuple->data[3] | (tuple->data[4]<<8); + dev_info(&func->dev, "Chip ID %04x:%04x\n", + vendor, device); + break; + default: + break; + } + break; + default: + break; + } + tuple = tuple->next; + } + if (!vendor || !device) { + error = -ENODEV; + goto out; + } + + sdio_claim_host(func); + error = sdio_set_block_size(func, B43_SDIO_BLOCK_SIZE); + if (error) { + dev_err(&func->dev, "failed to set block size to %u bytes," + " error %d\n", B43_SDIO_BLOCK_SIZE, error); + goto err_release_host; + } + error = sdio_enable_func(func); + if (error) { + dev_err(&func->dev, "failed to enable func, error %d\n", error); + goto err_release_host; + } + sdio_release_host(func); + + sdio = kzalloc(sizeof(*sdio), GFP_KERNEL); + if (!sdio) { + error = -ENOMEM; + dev_err(&func->dev, "failed to allocate ssb bus\n"); + goto err_disable_func; + } + error = ssb_bus_sdiobus_register(&sdio->ssb, func, + b43_sdio_get_quirks(vendor, device)); + if (error) { + dev_err(&func->dev, "failed to register ssb sdio bus," + " error %d\n", error); + goto err_free_ssb; + } + sdio_set_drvdata(func, sdio); + + return 0; + +err_free_ssb: + kfree(sdio); +err_disable_func: + sdio_disable_func(func); +err_release_host: + sdio_release_host(func); +out: + return error; +} + +static void b43_sdio_remove(struct sdio_func *func) +{ + struct b43_sdio *sdio = sdio_get_drvdata(func); + + ssb_bus_unregister(&sdio->ssb); + sdio_disable_func(func); + kfree(sdio); + sdio_set_drvdata(func, NULL); +} + +static const struct sdio_device_id b43_sdio_ids[] = { + { SDIO_DEVICE(0x02d0, 0x044b) }, /* Nintendo Wii WLAN daughter card */ + { }, +}; + +static struct sdio_driver b43_sdio_driver = { + .name = "b43-sdio", + .id_table = b43_sdio_ids, + .probe = b43_sdio_probe, + .remove = b43_sdio_remove, +}; + +int b43_sdio_init(void) +{ + return sdio_register_driver(&b43_sdio_driver); +} + +void b43_sdio_exit(void) +{ + sdio_unregister_driver(&b43_sdio_driver); +} diff --git a/drivers/net/wireless/b43/sdio.h b/drivers/net/wireless/b43/sdio.h new file mode 100644 index 00000000000..fb633094403 --- /dev/null +++ b/drivers/net/wireless/b43/sdio.h @@ -0,0 +1,45 @@ +#ifndef B43_SDIO_H_ +#define B43_SDIO_H_ + +#include <linux/ssb/ssb.h> + +struct b43_wldev; + + +#ifdef CONFIG_B43_SDIO + +struct b43_sdio { + struct ssb_bus ssb; + void *irq_handler_opaque; + void (*irq_handler)(struct b43_wldev *dev); +}; + +int b43_sdio_request_irq(struct b43_wldev *dev, + void (*handler)(struct b43_wldev *dev)); +void b43_sdio_free_irq(struct b43_wldev *dev); + +int b43_sdio_init(void); +void b43_sdio_exit(void); + + +#else /* CONFIG_B43_SDIO */ + + +int b43_sdio_request_irq(struct b43_wldev *dev, + void (*handler)(struct b43_wldev *dev)) +{ + return -ENODEV; +} +void b43_sdio_free_irq(struct b43_wldev *dev) +{ +} +static inline int b43_sdio_init(void) +{ + return 0; +} +static inline void b43_sdio_exit(void) +{ +} + +#endif /* CONFIG_B43_SDIO */ +#endif /* B43_SDIO_H_ */ diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 14f541248b5..ac9f600995e 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -690,8 +690,11 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) } memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status)); - ieee80211_rx_irqsafe(dev->wl->hw, skb); + ieee80211_rx(dev->wl->hw, skb); +#if B43_DEBUG + dev->rx_count++; +#endif return; drop: b43dbg(dev->wl, "RX: Packet dropped\n"); diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index ca61d3796ce..3259b884154 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2021,6 +2021,12 @@ static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, agg->frame_count, txq_id, idx); hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx); + if (!hdr) { + IWL_ERR(priv, + "BUG_ON idx doesn't point to valid skb" + " idx=%d, txq_id=%d\n", idx, txq_id); + return -1; + } sc = le16_to_cpu(hdr->seq_ctrl); if (idx != (SEQ_TO_SN(sc) & 0xff)) { diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 1d539e3b8db..a6391c7fea5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1163,6 +1163,12 @@ static int iwl5000_tx_status_reply_tx(struct iwl_priv *priv, agg->frame_count, txq_id, idx); hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx); + if (!hdr) { + IWL_ERR(priv, + "BUG_ON idx doesn't point to valid skb" + " idx=%d, txq_id=%d\n", idx, txq_id); + return -1; + } sc = le16_to_cpu(hdr->seq_ctrl); if (idx != (SEQ_TO_SN(sc) & 0xff)) { diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index b90adcb73b0..8e1bb53c0aa 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -250,12 +250,20 @@ void iwl_rx_allocate(struct iwl_priv *priv, gfp_t priority) } spin_unlock_irqrestore(&rxq->lock, flags); + if (rxq->free_count > RX_LOW_WATERMARK) + priority |= __GFP_NOWARN; /* Alloc a new receive buffer */ skb = alloc_skb(priv->hw_params.rx_buf_size + 256, priority); if (!skb) { - IWL_CRIT(priv, "Can not allocate SKB buffers\n"); + if (net_ratelimit()) + IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n"); + if ((rxq->free_count <= RX_LOW_WATERMARK) && + net_ratelimit()) + IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n", + priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL", + rxq->free_count); /* We don't reschedule replenish work here -- we will * call the restock method and if it still needs * more buffers it will schedule replenish */ diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index a2b9ec82b96..c6633fec821 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -520,7 +520,7 @@ int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty) struct iwl_host_cmd cmd = { .id = REPLY_WEPKEY, .data = wep_cmd, - .flags = CMD_SYNC, + .flags = CMD_ASYNC, }; memset(wep_cmd, 0, cmd_size + diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 090966837f3..4f2d4393728 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1146,11 +1146,18 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority) } spin_unlock_irqrestore(&rxq->lock, flags); + if (rxq->free_count > RX_LOW_WATERMARK) + priority |= __GFP_NOWARN; /* Alloc a new receive buffer */ skb = alloc_skb(priv->hw_params.rx_buf_size, priority); if (!skb) { if (net_ratelimit()) - IWL_CRIT(priv, ": Can not allocate SKB buffers\n"); + IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n"); + if ((rxq->free_count <= RX_LOW_WATERMARK) && + net_ratelimit()) + IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n", + priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL", + rxq->free_count); /* We don't reschedule replenish work here -- we will * call the restock method and if it still needs * more buffers it will schedule replenish */ diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index 5462cb5ad99..567f029a8cd 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -380,7 +380,7 @@ static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, { } -static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad, +static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int header_length, struct rxdone_entry_desc *rxdesc) { diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig index 7b14d5bc63d..88060e11754 100644 --- a/drivers/net/wireless/wl12xx/Kconfig +++ b/drivers/net/wireless/wl12xx/Kconfig @@ -1,5 +1,5 @@ menuconfig WL12XX - boolean "TI wl12xx driver support" + tristate "TI wl12xx driver support" depends on MAC80211 && WLAN_80211 && EXPERIMENTAL ---help--- This will enable TI wl12xx driver support. The drivers make diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index 38688847d56..23a6a6d4863 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -1070,7 +1070,7 @@ static int eject_installer(struct usb_interface *intf) /* Find bulk out endpoint */ endpoint = &iface_desc->endpoint[1].desc; - if ((endpoint->bEndpointAddress & USB_TYPE_MASK) == USB_DIR_OUT && + if (usb_endpoint_dir_out(endpoint) && usb_endpoint_xfer_bulk(endpoint)) { bulk_out_ep = endpoint->bEndpointAddress; } else { diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c index dc22782633a..83a044dbd1d 100644 --- a/drivers/net/xilinx_emaclite.c +++ b/drivers/net/xilinx_emaclite.c @@ -134,18 +134,15 @@ static void xemaclite_enable_interrupts(struct net_local *drvdata) } /* Enable the Rx interrupts for the first buffer */ - reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET); out_be32(drvdata->base_addr + XEL_RSR_OFFSET, - reg_data | XEL_RSR_RECV_IE_MASK); + XEL_RSR_RECV_IE_MASK); /* Enable the Rx interrupts for the second Buffer if * configured in HW */ if (drvdata->rx_ping_pong != 0) { - reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_RSR_OFFSET); out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET, - reg_data | XEL_RSR_RECV_IE_MASK); + XEL_RSR_RECV_IE_MASK); } /* Enable the Global Interrupt Enable */ diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 82b34893e5b..9a4dd5992f6 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -117,8 +117,6 @@ source "drivers/staging/vt6655/Kconfig" source "drivers/staging/vt6656/Kconfig" -source "drivers/staging/cpc-usb/Kconfig" - source "drivers/staging/udlfb/Kconfig" source "drivers/staging/hv/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index b1cad0d9ba7..104f2f8897e 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -40,7 +40,6 @@ obj-$(CONFIG_USB_SERIAL_QUATECH_USB2) += quatech_usb2/ obj-$(CONFIG_OCTEON_ETHERNET) += octeon/ obj-$(CONFIG_VT6655) += vt6655/ obj-$(CONFIG_VT6656) += vt6656/ -obj-$(CONFIG_USB_CPC) += cpc-usb/ obj-$(CONFIG_FB_UDL) += udlfb/ obj-$(CONFIG_HYPERV) += hv/ obj-$(CONFIG_VME_BUS) += vme/ diff --git a/drivers/staging/cpc-usb/Kconfig b/drivers/staging/cpc-usb/Kconfig deleted file mode 100644 index 2be0bc9c39d..00000000000 --- a/drivers/staging/cpc-usb/Kconfig +++ /dev/null @@ -1,4 +0,0 @@ -config USB_CPC - tristate "CPC CAN USB driver" - depends on USB && PROC_FS - default n diff --git a/drivers/staging/cpc-usb/Makefile b/drivers/staging/cpc-usb/Makefile deleted file mode 100644 index 3f83170a8fa..00000000000 --- a/drivers/staging/cpc-usb/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_USB_CPC) += cpc-usb.o - -cpc-usb-y := cpc-usb_drv.o sja2m16c_2.o diff --git a/drivers/staging/cpc-usb/TODO b/drivers/staging/cpc-usb/TODO deleted file mode 100644 index 9b1752fb9cd..00000000000 --- a/drivers/staging/cpc-usb/TODO +++ /dev/null @@ -1,10 +0,0 @@ -Things to do for this driver to get merged into the main portion of the -kernel: - - checkpatch cleanups - - sparse clean - - remove proc code - - tie into CAN socket interfaces if possible - - figure out sane userspace api - - use linux's error codes - -Send patches to Greg Kroah-Hartman <greg@kroah.com> diff --git a/drivers/staging/cpc-usb/cpc-usb_drv.c b/drivers/staging/cpc-usb/cpc-usb_drv.c deleted file mode 100644 index c5eca46996f..00000000000 --- a/drivers/staging/cpc-usb/cpc-usb_drv.c +++ /dev/null @@ -1,1184 +0,0 @@ -/* - * CPC-USB CAN Interface Kernel Driver - * - * Copyright (C) 2004-2009 EMS Dr. Thomas Wuensche - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published - * by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> -#include <linux/module.h> -#include <linux/poll.h> -#include <linux/smp_lock.h> -#include <linux/completion.h> -#include <asm/uaccess.h> -#include <linux/usb.h> - - -#include <linux/proc_fs.h> - -#include "cpc.h" - -#include "cpc_int.h" -#include "cpcusb.h" - -#include "sja2m16c.h" - -/* Version Information */ -#define DRIVER_AUTHOR "Sebastian Haas <haas@ems-wuensche.com>" -#define DRIVER_DESC "CPC-USB Driver for Linux Kernel 2.6" -#define DRIVER_VERSION CPC_DRIVER_VERSION - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); -MODULE_LICENSE("GPL v2"); - -/* Define these values to match your devices */ -#define USB_CPCUSB_VENDOR_ID 0x12D6 - -#define USB_CPCUSB_M16C_PRODUCT_ID 0x0888 -#define USB_CPCUSB_LPC2119_PRODUCT_ID 0x0444 - -#define CPC_USB_PROC_DIR CPC_PROC_DIR "cpc-usb" - -static struct proc_dir_entry *procDir; -static struct proc_dir_entry *procEntry; - -/* Module parameters */ -static int debug; -module_param(debug, int, S_IRUGO); - -/* table of devices that work with this driver */ -static struct usb_device_id cpcusb_table[] = { - {USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_M16C_PRODUCT_ID)}, - {USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_LPC2119_PRODUCT_ID)}, - {} /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, cpcusb_table); - -/* use to prevent kernel panic if driver is unloaded - * while a programm has still open the device - */ -DECLARE_WAIT_QUEUE_HEAD(rmmodWq); -atomic_t useCount; - -static CPC_USB_T *CPCUSB_Table[CPC_USB_CARD_CNT] = { 0 }; -static unsigned int CPCUsbCnt; - -/* prevent races between open() and disconnect() */ -static DECLARE_MUTEX(disconnect_sem); - -/* local function prototypes */ -static ssize_t cpcusb_read(struct file *file, char *buffer, size_t count, - loff_t *ppos); -static ssize_t cpcusb_write(struct file *file, const char *buffer, - size_t count, loff_t *ppos); -static unsigned int cpcusb_poll(struct file *file, poll_table * wait); -static int cpcusb_open(struct inode *inode, struct file *file); -static int cpcusb_release(struct inode *inode, struct file *file); - -static int cpcusb_probe(struct usb_interface *interface, - const struct usb_device_id *id); -static void cpcusb_disconnect(struct usb_interface *interface); - -static void cpcusb_read_bulk_callback(struct urb *urb); -static void cpcusb_write_bulk_callback(struct urb *urb); -static void cpcusb_read_interrupt_callback(struct urb *urb); - -static int cpcusb_setup_intrep(CPC_USB_T *card); - -static struct file_operations cpcusb_fops = { - /* - * The owner field is part of the module-locking - * mechanism. The idea is that the kernel knows - * which module to increment the use-counter of - * BEFORE it calls the device's open() function. - * This also means that the kernel can decrement - * the use-counter again before calling release() - * or should the open() function fail. - */ - .owner = THIS_MODULE, - - .read = cpcusb_read, - .write = cpcusb_write, - .poll = cpcusb_poll, - .open = cpcusb_open, - .release = cpcusb_release, -}; - -/* - * usb class driver info in order to get a minor number from the usb core, - * and to have the device registered with devfs and the driver core - */ -static struct usb_class_driver cpcusb_class = { - .name = "usb/cpc_usb%d", - .fops = &cpcusb_fops, - .minor_base = CPC_USB_BASE_MNR, -}; - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver cpcusb_driver = { - .name = "cpc-usb", - .probe = cpcusb_probe, - .disconnect = cpcusb_disconnect, - .id_table = cpcusb_table, -}; - -static int cpcusb_create_info_output(char *buf) -{ - int i = 0, j; - - for (j = 0; j < CPC_USB_CARD_CNT; j++) { - if (CPCUSB_Table[j]) { - CPC_USB_T *card = CPCUSB_Table[j]; - CPC_CHAN_T *chan = card->chan; - - /* MINOR CHANNELNO BUSNO SLOTNO */ - i += sprintf(&buf[i], "%d %s\n", chan->minor, - card->serialNumber); - } - } - - return i; -} - -static int cpcusb_proc_read_info(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len = cpcusb_create_info_output(page); - - if (len <= off + count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - - return len; -} - -/* - * Remove CPC-USB and cleanup - */ -static inline void cpcusb_delete(CPC_USB_T *card) -{ - if (card) { - if (card->chan) { - if (card->chan->buf) - vfree(card->chan->buf); - - if (card->chan->CPCWait_q) - kfree(card->chan->CPCWait_q); - - kfree(card->chan); - } - - CPCUSB_Table[card->idx] = NULL; - kfree(card); - } -} - -/* - * setup the interrupt IN endpoint of a specific CPC-USB device - */ -static int cpcusb_setup_intrep(CPC_USB_T *card) -{ - int retval = 0; - struct usb_endpoint_descriptor *ep; - - ep = &card->interface->altsetting[0].endpoint[card->num_intr_in].desc; - - card->intr_in_buffer[0] = 0; - card->free_slots = 15; /* initial size */ - - /* setup the urb */ - usb_fill_int_urb(card->intr_in_urb, card->udev, - usb_rcvintpipe(card->udev, card->num_intr_in), - card->intr_in_buffer, - sizeof(card->intr_in_buffer), - cpcusb_read_interrupt_callback, - card, - ep->bInterval); - - card->intr_in_urb->status = 0; /* needed! */ - - /* submit the urb */ - retval = usb_submit_urb(card->intr_in_urb, GFP_KERNEL); - - if (retval) - err("%s - failed submitting intr urb, error %d", __func__, - retval); - - return retval; -} - -static int cpcusb_open(struct inode *inode, struct file *file) -{ - CPC_USB_T *card = NULL; - struct usb_interface *interface; - int subminor; - int j, retval = 0; - - subminor = iminor(inode); - - /* prevent disconnects */ - down(&disconnect_sem); - - interface = usb_find_interface(&cpcusb_driver, subminor); - if (!interface) { - err("%s - error, can't find device for minor %d", - __func__, subminor); - retval = CPC_ERR_NO_INTERFACE_PRESENT; - goto exit_no_device; - } - - card = usb_get_intfdata(interface); - if (!card) { - retval = CPC_ERR_NO_INTERFACE_PRESENT; - goto exit_no_device; - } - - /* lock this device */ - down(&card->sem); - - /* increment our usage count for the driver */ - if (card->open) { - dbg("device already opened"); - retval = CPC_ERR_CHANNEL_ALREADY_OPEN; - goto exit_on_error; - } - - /* save our object in the file's private structure */ - file->private_data = card; - for (j = 0; j < CPC_USB_URB_CNT; j++) { - usb_fill_bulk_urb(card->urbs[j].urb, card->udev, - usb_rcvbulkpipe(card->udev, card->num_bulk_in), - card->urbs[j].buffer, card->urbs[j].size, - cpcusb_read_bulk_callback, card); - - retval = usb_submit_urb(card->urbs[j].urb, GFP_KERNEL); - - if (retval) { - err("%s - failed submitting read urb, error %d", - __func__, retval); - retval = CPC_ERR_TRANSMISSION_FAILED; - goto exit_on_error; - } - } - - info("%s - %d URB's submitted", __func__, j); - - ResetBuffer(card->chan); - - cpcusb_setup_intrep(card); - card->open = 1; - - atomic_inc(&useCount); - -exit_on_error: - /* unlock this device */ - up(&card->sem); - -exit_no_device: - up(&disconnect_sem); - - return retval; -} - -static unsigned int cpcusb_poll(struct file *file, poll_table * wait) -{ - CPC_USB_T *card = (CPC_USB_T *) file->private_data; - unsigned int retval = 0; - - if (!card) { - err("%s - device object lost", __func__); - return -EIO; - } - - poll_wait(file, card->chan->CPCWait_q, wait); - - if (IsBufferNotEmpty(card->chan) || !(card->present)) - retval |= (POLLIN | POLLRDNORM); - - if (card->free_slots) - retval |= (POLLOUT | POLLWRNORM); - - return retval; -} - -static int cpcusb_release(struct inode *inode, struct file *file) -{ - CPC_USB_T *card = (CPC_USB_T *) file->private_data; - int j, retval = 0; - - if (card == NULL) { - dbg("%s - object is NULL", __func__); - return CPC_ERR_NO_INTERFACE_PRESENT; - } - - /* lock our device */ - down(&card->sem); - - if (!card->open) { - dbg("%s - device not opened", __func__); - retval = CPC_ERR_NO_INTERFACE_PRESENT; - goto exit_not_opened; - } - - /* if device wasn't unplugged kill all urbs */ - if (card->present) { - /* kill read urbs */ - for (j = 0; j < CPC_USB_URB_CNT; j++) { - usb_kill_urb(card->urbs[j].urb); - } - - /* kill irq urb */ - usb_kill_urb(card->intr_in_urb); - - /* kill write urbs */ - for (j = 0; j < CPC_USB_URB_CNT; j++) { - if (atomic_read(&card->wrUrbs[j].busy)) { - usb_kill_urb(card->wrUrbs[j].urb); - wait_for_completion(&card->wrUrbs[j].finished); - } - } - } - - atomic_dec(&useCount); - - /* last process detached */ - if (atomic_read(&useCount) == 0) { - wake_up(&rmmodWq); - } - - if (!card->present && card->open) { - /* the device was unplugged before the file was released */ - up(&card->sem); - cpcusb_delete(card); - return 0; - } - - card->open = 0; - -exit_not_opened: - up(&card->sem); - - return 0; -} - -static ssize_t cpcusb_read(struct file *file, char *buffer, size_t count, - loff_t *ppos) -{ - CPC_USB_T *card = (CPC_USB_T *) file->private_data; - CPC_CHAN_T *chan; - int retval = 0; - - if (count < sizeof(CPC_MSG_T)) - return CPC_ERR_UNKNOWN; - - /* check if can read from the given address */ - if (!access_ok(VERIFY_WRITE, buffer, count)) - return CPC_ERR_UNKNOWN; - - /* lock this object */ - down(&card->sem); - - /* verify that the device wasn't unplugged */ - if (!card->present) { - up(&card->sem); - return CPC_ERR_NO_INTERFACE_PRESENT; - } - - if (IsBufferEmpty(card->chan)) { - retval = 0; - } else { - chan = card->chan; - -#if 0 - /* convert LPC2119 params back to SJA1000 params */ - if (card->deviceRevision >= 0x0200 - && chan->buf[chan->oidx].type == CPC_MSG_T_CAN_PRMS) { - LPC2119_TO_SJA1000_Params(&chan->buf[chan->oidx]); - } -#endif - - if (copy_to_user(buffer, &chan->buf[chan->oidx], count) != 0) { - retval = CPC_ERR_IO_TRANSFER; - } else { - chan->oidx = (chan->oidx + 1) % CPC_MSG_BUF_CNT; - chan->WnR = 1; - retval = sizeof(CPC_MSG_T); - } - } -/* spin_unlock_irqrestore(&card->slock, flags); */ - - /* unlock the device */ - up(&card->sem); - - return retval; -} - -#define SHIFT 1 -static inline void cpcusb_align_buffer_alignment(unsigned char *buf) -{ - /* CPC-USB uploads packed bytes. */ - CPC_MSG_T *cpc = (CPC_MSG_T *) buf; - unsigned int i; - - for (i = 0; i < cpc->length + (2 * sizeof(unsigned long)); i++) { - ((unsigned char *) &cpc->msgid)[1 + i] = - ((unsigned char *) &cpc->msgid)[1 + SHIFT + i]; - } -} - -static int cpc_get_buffer_count(CPC_CHAN_T *chan) -{ - /* check the buffer parameters */ - if (chan->iidx == chan->oidx) - return !chan->WnR ? CPC_MSG_BUF_CNT : 0; - else if (chan->iidx >= chan->oidx) - return (chan->iidx - chan->oidx) % CPC_MSG_BUF_CNT; - - return (chan->iidx + CPC_MSG_BUF_CNT - chan->oidx) % CPC_MSG_BUF_CNT; -} - -static ssize_t cpcusb_write(struct file *file, const char *buffer, - size_t count, loff_t *ppos) -{ - CPC_USB_T *card = (CPC_USB_T *) file->private_data; - CPC_USB_WRITE_URB_T *wrUrb = NULL; - - ssize_t bytes_written = 0; - int retval = 0; - int j; - - unsigned char *obuf = NULL; - unsigned char type = 0; - CPC_MSG_T *info = NULL; - - dbg("%s - entered minor %d, count = %zu, present = %d", - __func__, card->minor, count, card->present); - - if (count > sizeof(CPC_MSG_T)) - return CPC_ERR_UNKNOWN; - - /* check if can read from the given address */ - if (!access_ok(VERIFY_READ, buffer, count)) - return CPC_ERR_UNKNOWN; - - /* lock this object */ - down(&card->sem); - - /* verify that the device wasn't unplugged */ - if (!card->present) { - retval = CPC_ERR_NO_INTERFACE_PRESENT; - goto exit; - } - - /* verify that we actually have some data to write */ - if (count == 0) { - dbg("%s - write request of 0 bytes", __func__); - goto exit; - } - - if (card->free_slots <= 5) { - info = (CPC_MSG_T *) buffer; - - if (info->type != CPC_CMD_T_CLEAR_CMD_QUEUE - || card->free_slots <= 0) { - dbg("%s - send buffer full please try again %d", - __func__, card->free_slots); - retval = CPC_ERR_CAN_NO_TRANSMIT_BUF; - goto exit; - } - } - - /* Find a free write urb */ - for (j = 0; j < CPC_USB_URB_CNT; j++) { - if (!atomic_read(&card->wrUrbs[j].busy)) { - wrUrb = &card->wrUrbs[j]; /* remember found URB */ - atomic_set(&wrUrb->busy, 1); /* lock this URB */ - init_completion(&wrUrb->finished); /* init completion */ - dbg("WR URB no. %d started", j); - break; - } - } - - /* don't found write urb say error */ - if (!wrUrb) { - dbg("%s - no free send urb available", __func__); - retval = CPC_ERR_CAN_NO_TRANSMIT_BUF; - goto exit; - } - dbg("URB write req"); - - obuf = (unsigned char *) wrUrb->urb->transfer_buffer; - - /* copy the data from userspace into our transfer buffer; - * this is the only copy required. - */ - if (copy_from_user(&obuf[4], buffer, count) != 0) { - atomic_set(&wrUrb->busy, 0); /* release urb */ - retval = CPC_ERR_IO_TRANSFER; - goto exit; - } - - /* check if it is a DRIVER information message, so we can - * response to that message and not the USB - */ - info = (CPC_MSG_T *) &obuf[4]; - - bytes_written = 11 + info->length; - if (bytes_written >= wrUrb->size) { - retval = CPC_ERR_IO_TRANSFER; - goto exit; - } - - switch (info->type) { - case CPC_CMD_T_CLEAR_MSG_QUEUE: - ResetBuffer(card->chan); - break; - - case CPC_CMD_T_INQ_MSG_QUEUE_CNT: - retval = cpc_get_buffer_count(card->chan); - atomic_set(&wrUrb->busy, 0); - - goto exit; - - case CPC_CMD_T_INQ_INFO: - if (info->msg.info.source == CPC_INFOMSG_T_DRIVER) { - /* release urb cause we'll use it for driver - * information - */ - atomic_set(&wrUrb->busy, 0); - if (IsBufferFull(card->chan)) { - retval = CPC_ERR_IO_TRANSFER; - goto exit; - } - - /* it is a driver information request message and we have - * free rx slots to store the response - */ - type = info->msg.info.type; - info = &card->chan->buf[card->chan->iidx]; - - info->type = CPC_MSG_T_INFO; - info->msg.info.source = CPC_INFOMSG_T_DRIVER; - info->msg.info.type = type; - - switch (type) { - case CPC_INFOMSG_T_VERSION: - info->length = strlen(CPC_DRIVER_VERSION) + 2; - sprintf(info->msg.info.msg, "%s\n", - CPC_DRIVER_VERSION); - break; - - case CPC_INFOMSG_T_SERIAL: - info->length = strlen(CPC_DRIVER_SERIAL) + 2; - sprintf(info->msg.info.msg, "%s\n", - CPC_DRIVER_SERIAL); - break; - - default: - info->length = 2; - info->msg.info.type = - CPC_INFOMSG_T_UNKNOWN_TYPE; - } - - card->chan->WnR = 0; - card->chan->iidx = - (card->chan->iidx + 1) % CPC_MSG_BUF_CNT; - - retval = info->length; - goto exit; - } - break; - case CPC_CMD_T_CAN_PRMS: - /* Check the controller type. If it's the new CPC-USB, make sure if these are SJA1000 params */ - if (info->msg.canparams.cc_type != SJA1000 - && info->msg.canparams.cc_type != M16C_BASIC - && (card->productId == USB_CPCUSB_LPC2119_PRODUCT_ID - && info->msg.canparams.cc_type != SJA1000)) { - /* don't forget to release the urb */ - atomic_set(&wrUrb->busy, 0); - retval = CPC_ERR_WRONG_CONTROLLER_TYPE; - goto exit; - } - break; - } - - /* just convert the params if it is an old CPC-USB with M16C controller */ - if (card->productId == USB_CPCUSB_M16C_PRODUCT_ID) { - /* if it is a parameter message convert it from SJA1000 controller - * settings to M16C Basic controller settings - */ - SJA1000_TO_M16C_BASIC_Params((CPC_MSG_T *) &obuf[4]); - } - - /* don't forget the byte alignment */ - cpcusb_align_buffer_alignment(&obuf[4]); - - /* setup a the 4 byte header */ - obuf[0] = obuf[1] = obuf[2] = obuf[3] = 0; - - /* this urb was already set up, except for this write size */ - wrUrb->urb->transfer_buffer_length = bytes_written + 4; - - /* send the data out the bulk port */ - /* a character device write uses GFP_KERNEL, - unless a spinlock is held */ - retval = usb_submit_urb(wrUrb->urb, GFP_KERNEL); - if (retval) { - atomic_set(&wrUrb->busy, 0); /* release urb */ - err("%s - failed submitting write urb, error %d", - __func__, retval); - } else { - retval = bytes_written; - } - -exit: - /* unlock the device */ - up(&card->sem); - - dbg("%s - leaved", __func__); - - return retval; -} - -/* - * callback for interrupt IN urb - */ -static void cpcusb_read_interrupt_callback(struct urb *urb) -{ - CPC_USB_T *card = (CPC_USB_T *) urb->context; - int retval; - unsigned long flags; - - spin_lock_irqsave(&card->slock, flags); - - if (!card->present) { - spin_unlock_irqrestore(&card->slock, flags); - info("%s - no such device", __func__); - return; - } - - switch (urb->status) { - case 0: /* success */ - card->free_slots = card->intr_in_buffer[1]; - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* urb was killed */ - spin_unlock_irqrestore(&card->slock, flags); - dbg("%s - intr urb killed", __func__); - return; - default: - info("%s - nonzero urb status %d", __func__, urb->status); - break; - } - - retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval) { - err("%s - failed resubmitting intr urb, error %d", - __func__, retval); - } - - spin_unlock_irqrestore(&card->slock, flags); - wake_up_interruptible(card->chan->CPCWait_q); - - return; -} - -#define UN_SHIFT 1 -#define CPCMSG_HEADER_LEN_FIRMWARE 11 -static inline int cpcusb_unalign_and_copy_buffy(unsigned char *out, - unsigned char *in) -{ - unsigned int i, j; - - for (i = 0; i < 3; i++) - out[i] = in[i]; - - for (j = 0; j < (in[1] + (CPCMSG_HEADER_LEN_FIRMWARE - 3)); j++) - out[j + i + UN_SHIFT] = in[j + i]; - - return i + j; -} - -/* - * callback for bulk IN urb - */ -static void cpcusb_read_bulk_callback(struct urb *urb) -{ - CPC_USB_T *card = (CPC_USB_T *) urb->context; - CPC_CHAN_T *chan; - unsigned char *ibuf = urb->transfer_buffer; - int retval, msgCnt, start, again = 0; - unsigned long flags; - - if (!card) { - err("%s - device object lost", __func__); - return; - } - - spin_lock_irqsave(&card->slock, flags); - - if (!card->present) { - spin_unlock_irqrestore(&card->slock, flags); - info("%s - no such device", __func__); - return; - } - - switch (urb->status) { - case 0: /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* urb was killed */ - spin_unlock_irqrestore(&card->slock, flags); - dbg("%s - read urb killed", __func__); - return; - default: - info("%s - nonzero urb status %d", __func__, urb->status); - break; - } - - if (urb->actual_length) { - msgCnt = ibuf[0] & ~0x80; - again = ibuf[0] & 0x80; - - /* we have a 4 byte header */ - start = 4; - chan = card->chan; - while (msgCnt) { - if (!(IsBufferFull(card->chan))) { - start += - cpcusb_unalign_and_copy_buffy((unsigned char *) - &chan->buf[chan->iidx], &ibuf[start]); - - if (start > urb->transfer_buffer_length) { - err("%d > %d", start, urb->transfer_buffer_length); - break; - } - - chan->WnR = 0; - chan->iidx = (chan->iidx + 1) % CPC_MSG_BUF_CNT; - msgCnt--; - } else { - break; - } - } - } - - usb_fill_bulk_urb(urb, card->udev, - usb_rcvbulkpipe(card->udev, card->num_bulk_in), - urb->transfer_buffer, - urb->transfer_buffer_length, - cpcusb_read_bulk_callback, card); - - retval = usb_submit_urb(urb, GFP_ATOMIC); - - if (retval) { - err("%s - failed resubmitting read urb, error %d", __func__, retval); - } - - spin_unlock_irqrestore(&card->slock, flags); - - wake_up_interruptible(card->chan->CPCWait_q); -} - -/* - * callback for bulk IN urb - */ -static void cpcusb_write_bulk_callback(struct urb *urb) -{ - CPC_USB_T *card = (CPC_USB_T *) urb->context; - unsigned long flags; - int j; - - spin_lock_irqsave(&card->slock, flags); - - /* find this urb */ - for (j = 0; j < CPC_USB_URB_CNT; j++) { - if (card->wrUrbs[j].urb == urb) { - dbg("URB found no. %d", j); - /* notify anyone waiting that the write has finished */ - complete(&card->wrUrbs[j].finished); - atomic_set(&card->wrUrbs[j].busy, 0); - break; - } - } - - switch (urb->status) { - case 0: /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* urb was killed */ - spin_unlock_irqrestore(&card->slock, flags); - dbg("%s - write urb no. %d killed", __func__, j); - return; - default: - info("%s - nonzero urb status %d", __func__, urb->status); - break; - } - - spin_unlock_irqrestore(&card->slock, flags); - - wake_up_interruptible(card->chan->CPCWait_q); -} - -static inline int cpcusb_get_free_slot(void) -{ - int i; - - for (i = 0; i < CPC_USB_CARD_CNT; i++) { - if (!CPCUSB_Table[i]) - return i; - } - - return -1; -} - -/* - * probe function for new CPC-USB devices - */ -static int cpcusb_probe(struct usb_interface *interface, - const struct usb_device_id *id) -{ - CPC_USB_T *card = NULL; - CPC_CHAN_T *chan = NULL; - - struct usb_device *udev = interface_to_usbdev(interface); - struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; - - int i, j, retval = -ENOMEM, slot; - - slot = cpcusb_get_free_slot(); - if (slot < 0) { - info("No more devices supported"); - return -ENOMEM; - } - - /* allocate memory for our device state and initialize it */ - card = kzalloc(sizeof(CPC_USB_T), GFP_KERNEL); - if (!card) { - err("Out of memory"); - return -ENOMEM; - } - CPCUSB_Table[slot] = card; - - /* allocate and initialize the channel struct */ - card->chan = kmalloc(sizeof(CPC_CHAN_T), GFP_KERNEL); - if (!card->chan) { - kfree(card); - err("Out of memory"); - return -ENOMEM; - } - - chan = card->chan; - memset(chan, 0, sizeof(CPC_CHAN_T)); - ResetBuffer(chan); - - init_MUTEX(&card->sem); - spin_lock_init(&card->slock); - - card->udev = udev; - card->interface = interface; - if (udev->descriptor.iSerialNumber) { - usb_string(udev, udev->descriptor.iSerialNumber, card->serialNumber, - 128); - info("Serial %s", card->serialNumber); - } - - card->productId = udev->descriptor.idProduct; - info("Product %s", - card->productId == USB_CPCUSB_LPC2119_PRODUCT_ID ? - "CPC-USB/ARM7" : "CPC-USB/M16C"); - - /* set up the endpoint information */ - /* check out the endpoints */ - /* use only the first bulk-in and bulk-out endpoints */ - iface_desc = &interface->altsetting[0]; - for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { - endpoint = &iface_desc->endpoint[i].desc; - - if (!card->num_intr_in && - (endpoint->bEndpointAddress & USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_INT)) { - card->intr_in_urb = usb_alloc_urb(0, GFP_KERNEL); - card->num_intr_in = 1; - - if (!card->intr_in_urb) { - err("No free urbs available"); - goto error; - } - - dbg("intr_in urb %d", card->num_intr_in); - } - - if (!card->num_bulk_in && - (endpoint->bEndpointAddress & USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_BULK)) { - card->num_bulk_in = 2; - for (j = 0; j < CPC_USB_URB_CNT; j++) { - card->urbs[j].size = endpoint->wMaxPacketSize; - card->urbs[j].urb = usb_alloc_urb(0, GFP_KERNEL); - if (!card->urbs[j].urb) { - err("No free urbs available"); - goto error; - } - card->urbs[j].buffer = - usb_buffer_alloc(udev, - card->urbs[j].size, - GFP_KERNEL, - &card->urbs[j].urb->transfer_dma); - if (!card->urbs[j].buffer) { - err("Couldn't allocate bulk_in_buffer"); - goto error; - } - } - info("%s - %d reading URB's allocated", - __func__, CPC_USB_URB_CNT); - } - - if (!card->num_bulk_out && - !(endpoint->bEndpointAddress & USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_BULK)) { - - card->num_bulk_out = 2; - - for (j = 0; j < CPC_USB_URB_CNT; j++) { - card->wrUrbs[j].size = - endpoint->wMaxPacketSize; - card->wrUrbs[j].urb = - usb_alloc_urb(0, GFP_KERNEL); - if (!card->wrUrbs[j].urb) { - err("No free urbs available"); - goto error; - } - card->wrUrbs[j].buffer = usb_buffer_alloc(udev, - card->wrUrbs[j].size, GFP_KERNEL, - &card->wrUrbs[j].urb->transfer_dma); - - if (!card->wrUrbs[j].buffer) { - err("Couldn't allocate bulk_out_buffer"); - goto error; - } - - usb_fill_bulk_urb(card->wrUrbs[j].urb, udev, - usb_sndbulkpipe(udev, endpoint->bEndpointAddress), - card->wrUrbs[j].buffer, - card->wrUrbs[j].size, - cpcusb_write_bulk_callback, - card); - } - - info("%s - %d writing URB's allocated", __func__, CPC_USB_URB_CNT); - } - } - - if (!(card->num_bulk_in && card->num_bulk_out)) { - err("Couldn't find both bulk-in and bulk-out endpoints"); - goto error; - } - - /* allow device read, write and ioctl */ - card->present = 1; - - /* we can register the device now, as it is ready */ - usb_set_intfdata(interface, card); - retval = usb_register_dev(interface, &cpcusb_class); - - if (retval) { - /* something prevented us from registering this driver */ - err("Not able to get a minor for this device."); - usb_set_intfdata(interface, NULL); - goto error; - } - - card->chan->minor = card->minor = interface->minor; - - chan->buf = vmalloc(sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT); - if (chan->buf == NULL) { - err("Out of memory"); - retval = -ENOMEM; - goto error; - } - info("Allocated memory for %d messages (%lu kbytes)", - CPC_MSG_BUF_CNT, (long unsigned int)(sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT) / 1000); - memset(chan->buf, 0, sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT); - - ResetBuffer(chan); - - card->chan->CPCWait_q = kmalloc(sizeof(wait_queue_head_t), GFP_KERNEL); - if (!card->chan->CPCWait_q) { - err("Out of memory"); - retval = -ENOMEM; - goto error; - } - init_waitqueue_head(card->chan->CPCWait_q); - - CPCUSB_Table[slot] = card; - card->idx = slot; - CPCUsbCnt++; - - /* let the user know what node this device is now attached to */ - info("Device now attached to USB-%d", card->minor); - return 0; - -error: - for (j = 0; j < CPC_USB_URB_CNT; j++) { - if (card->urbs[j].buffer) { - usb_buffer_free(card->udev, card->urbs[j].size, - card->urbs[j].buffer, - card->urbs[j].urb->transfer_dma); - card->urbs[j].buffer = NULL; - } - if (card->urbs[j].urb) { - usb_free_urb(card->urbs[j].urb); - card->urbs[j].urb = NULL; - } - } - - cpcusb_delete(card); - return retval; -} - -/* - * called by the usb core when the device is removed from the system - */ -static void cpcusb_disconnect(struct usb_interface *interface) -{ - CPC_USB_T *card = NULL; - int minor, j; - - /* prevent races with open() */ - down(&disconnect_sem); - - card = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); - - down(&card->sem); - - /* prevent device read, write and ioctl */ - card->present = 0; - - minor = card->minor; - - /* free all urbs and their buffers */ - for (j = 0; j < CPC_USB_URB_CNT; j++) { - /* terminate an ongoing write */ - if (atomic_read(&card->wrUrbs[j].busy)) { - usb_kill_urb(card->wrUrbs[j].urb); - wait_for_completion(&card->wrUrbs[j].finished); - } - usb_buffer_free(card->udev, card->wrUrbs[j].size, - card->wrUrbs[j].buffer, - card->wrUrbs[j].urb->transfer_dma); - usb_free_urb(card->wrUrbs[j].urb); - } - info("%d write URBs freed", CPC_USB_URB_CNT); - - /* free all urbs and their buffers */ - for (j = 0; j < CPC_USB_URB_CNT; j++) { - usb_buffer_free(card->udev, card->urbs[j].size, - card->urbs[j].buffer, - card->urbs[j].urb->transfer_dma); - usb_free_urb(card->urbs[j].urb); - } - info("%d read URBs freed", CPC_USB_URB_CNT); - usb_free_urb(card->intr_in_urb); - - /* give back our minor */ - usb_deregister_dev(interface, &cpcusb_class); - - up(&card->sem); - - /* if the device is opened, cpcusb_release will clean this up */ - if (!card->open) - cpcusb_delete(card); - else - wake_up_interruptible(card->chan->CPCWait_q); - - up(&disconnect_sem); - - CPCUsbCnt--; - info("USB-%d now disconnected", minor); -} - -static int __init CPCUsb_Init(void) -{ - int result, i; - - info(DRIVER_DESC " v" DRIVER_VERSION); - info("Build on " __DATE__ " at " __TIME__); - - for (i = 0; i < CPC_USB_CARD_CNT; i++) - CPCUSB_Table[i] = 0; - - /* register this driver with the USB subsystem */ - result = usb_register(&cpcusb_driver); - if (result) { - err("usb_register failed. Error number %d", result); - return result; - } - - procDir = proc_mkdir(CPC_USB_PROC_DIR, NULL); - if (!procDir) { - err("Could not create proc entry"); - } else { - procEntry = create_proc_read_entry("info", 0444, procDir, - cpcusb_proc_read_info, - NULL); - if (!procEntry) { - err("Could not create proc entry %s", CPC_USB_PROC_DIR "/info"); - remove_proc_entry(CPC_USB_PROC_DIR, NULL); - procDir = NULL; - } - } - - return 0; -} - -static void __exit CPCUsb_Exit(void) -{ - wait_event(rmmodWq, !atomic_read(&useCount)); - - /* deregister this driver with the USB subsystem */ - usb_deregister(&cpcusb_driver); - - if (procDir) { - if (procEntry) - remove_proc_entry("info", procDir); - remove_proc_entry(CPC_USB_PROC_DIR, NULL); - } -} - -module_init(CPCUsb_Init); -module_exit(CPCUsb_Exit); diff --git a/drivers/staging/cpc-usb/cpc.h b/drivers/staging/cpc-usb/cpc.h deleted file mode 100644 index b2fda5d14c1..00000000000 --- a/drivers/staging/cpc-usb/cpc.h +++ /dev/null @@ -1,417 +0,0 @@ -/* - * CPC CAN Interface Definitions - * - * Copyright (C) 2000-2008 EMS Dr. Thomas Wuensche - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - */ -#ifndef CPC_HEADER -#define CPC_HEADER - -/* - * the maximum length of the union members within a CPC_MSG - * this value can be defined by the customer, but has to be - * >= 64 bytes - * however, if not defined before, we set a length of 64 byte - */ -#if !defined(CPC_MSG_LEN) || (CPC_MSG_LEN < 64) -#undef CPC_MSG_LEN -#define CPC_MSG_LEN 64 -#endif - -/* - * Transmission of events from CPC interfaces to PC can be individually - * controlled per event type. Default state is: don't transmit - * Control values are constructed by bit-or of Subject and Action - * and passed to CPC_Control() - */ - -/* Control-Values for CPC_Control() Command Subject Selection */ -#define CONTR_CAN_Message 0x04 -#define CONTR_Busload 0x08 -#define CONTR_CAN_State 0x0C -#define CONTR_SendAck 0x10 -#define CONTR_Filter 0x14 -#define CONTR_CmdQueue 0x18 /* reserved, do not use */ -#define CONTR_BusError 0x1C - -/* Control Command Actions */ -#define CONTR_CONT_OFF 0 -#define CONTR_CONT_ON 1 -#define CONTR_SING_ON 2 -/* - * CONTR_SING_ON doesn't change CONTR_CONT_ON state, so it should be - * read as: transmit at least once - */ - -/* defines for confirmed request */ -#define DO_NOT_CONFIRM 0 -#define DO_CONFIRM 1 - -/* event flags */ -#define EVENT_READ 0x01 -#define EVENT_WRITE 0x02 - -/* - * Messages from CPC to PC contain a message object type field. - * The following message types are sent by CPC and can be used in - * handlers, others should be ignored. - */ -#define CPC_MSG_T_RESYNC 0 /* Normally to be ignored */ -#define CPC_MSG_T_CAN 1 /* CAN data frame */ -#define CPC_MSG_T_BUSLOAD 2 /* Busload message */ -#define CPC_MSG_T_STRING 3 /* Normally to be ignored */ -#define CPC_MSG_T_CONTI 4 /* Normally to be ignored */ -#define CPC_MSG_T_MEM 7 /* Normally not to be handled */ -#define CPC_MSG_T_RTR 8 /* CAN remote frame */ -#define CPC_MSG_T_TXACK 9 /* Send acknowledge */ -#define CPC_MSG_T_POWERUP 10 /* Power-up message */ -#define CPC_MSG_T_CMD_NO 11 /* Normally to be ignored */ -#define CPC_MSG_T_CAN_PRMS 12 /* Actual CAN parameters */ -#define CPC_MSG_T_ABORTED 13 /* Command aborted message */ -#define CPC_MSG_T_CANSTATE 14 /* CAN state message */ -#define CPC_MSG_T_RESET 15 /* used to reset CAN-Controller */ -#define CPC_MSG_T_XCAN 16 /* XCAN data frame */ -#define CPC_MSG_T_XRTR 17 /* XCAN remote frame */ -#define CPC_MSG_T_INFO 18 /* information strings */ -#define CPC_MSG_T_CONTROL 19 /* used for control of interface/driver behaviour */ -#define CPC_MSG_T_CONFIRM 20 /* response type for confirmed requests */ -#define CPC_MSG_T_OVERRUN 21 /* response type for overrun conditions */ -#define CPC_MSG_T_KEEPALIVE 22 /* response type for keep alive conditions */ -#define CPC_MSG_T_CANERROR 23 /* response type for bus error conditions */ -#define CPC_MSG_T_DISCONNECTED 24 /* response type for a disconnected interface */ -#define CPC_MSG_T_ERR_COUNTER 25 /* RX/TX error counter of CAN controller */ - -#define CPC_MSG_T_FIRMWARE 100 /* response type for USB firmware download */ - -/* - * Messages from the PC to the CPC interface contain a command field - * Most of the command types are wrapped by the library functions and have therefore - * normally not to be used. - * However, programmers who wish to circumvent the library and talk directly - * to the drivers (mainly Linux programmers) can use the following - * command types: - */ -#define CPC_CMD_T_CAN 1 /* CAN data frame */ -#define CPC_CMD_T_CONTROL 3 /* used for control of interface/driver behaviour */ -#define CPC_CMD_T_CAN_PRMS 6 /* set CAN parameters */ -#define CPC_CMD_T_CLEARBUF 8 /* clears input queue; this is depricated, use CPC_CMD_T_CLEAR_MSG_QUEUE instead */ -#define CPC_CMD_T_INQ_CAN_PARMS 11 /* inquire actual CAN parameters */ -#define CPC_CMD_T_FILTER_PRMS 12 /* set filter parameter */ -#define CPC_CMD_T_RTR 13 /* CAN remote frame */ -#define CPC_CMD_T_CANSTATE 14 /* CAN state message */ -#define CPC_CMD_T_XCAN 15 /* XCAN data frame */ -#define CPC_CMD_T_XRTR 16 /* XCAN remote frame */ -#define CPC_CMD_T_RESET 17 /* used to reset CAN-Controller */ -#define CPC_CMD_T_INQ_INFO 18 /* miscellanous information strings */ -#define CPC_CMD_T_OPEN_CHAN 19 /* open a channel */ -#define CPC_CMD_T_CLOSE_CHAN 20 /* close a channel */ -#define CPC_CMD_T_CNTBUF 21 /* this is depricated, use CPC_CMD_T_INQ_MSG_QUEUE_CNT instead */ -#define CPC_CMD_T_CAN_EXIT 200 /* exit the CAN (disable interrupts; reset bootrate; reset output_cntr; mode = 1) */ - -#define CPC_CMD_T_INQ_MSG_QUEUE_CNT CPC_CMD_T_CNTBUF /* inquires the count of elements in the message queue */ -#define CPC_CMD_T_INQ_ERR_COUNTER 25 /* request the CAN controllers error counter */ -#define CPC_CMD_T_CLEAR_MSG_QUEUE CPC_CMD_T_CLEARBUF /* clear CPC_MSG queue */ -#define CPC_CMD_T_CLEAR_CMD_QUEUE 28 /* clear CPC_CMD queue */ -#define CPC_CMD_T_FIRMWARE 100 /* reserved, must not be used */ -#define CPC_CMD_T_USB_RESET 101 /* reserved, must not be used */ -#define CPC_CMD_T_WAIT_NOTIFY 102 /* reserved, must not be used */ -#define CPC_CMD_T_WAIT_SETUP 103 /* reserved, must not be used */ -#define CPC_CMD_T_ABORT 255 /* Normally not to be used */ - -/* definitions for CPC_MSG_T_INFO information sources */ -#define CPC_INFOMSG_T_UNKNOWN_SOURCE 0 -#define CPC_INFOMSG_T_INTERFACE 1 -#define CPC_INFOMSG_T_DRIVER 2 -#define CPC_INFOMSG_T_LIBRARY 3 - -/* information types */ -#define CPC_INFOMSG_T_UNKNOWN_TYPE 0 -#define CPC_INFOMSG_T_VERSION 1 -#define CPC_INFOMSG_T_SERIAL 2 - -/* definitions for controller types */ -#define PCA82C200 1 /* Philips basic CAN controller, replaced by SJA1000 */ -#define SJA1000 2 /* Philips basic CAN controller */ -#define AN82527 3 /* Intel full CAN controller */ -#define M16C_BASIC 4 /* M16C controller running in basic CAN (not full CAN) mode */ - -/* channel open error codes */ -#define CPC_ERR_NO_FREE_CHANNEL -1 /* no more free space within the channel array */ -#define CPC_ERR_CHANNEL_ALREADY_OPEN -2 /* the channel is already open */ -#define CPC_ERR_CHANNEL_NOT_ACTIVE -3 /* access to a channel not active failed */ -#define CPC_ERR_NO_DRIVER_PRESENT -4 /* no driver at the location searched by the library */ -#define CPC_ERR_NO_INIFILE_PRESENT -5 /* the library could not find the inifile */ -#define CPC_ERR_WRONG_PARAMETERS -6 /* wrong parameters in the inifile */ -#define CPC_ERR_NO_INTERFACE_PRESENT -7 /* 1. The specified interface is not connected */ - /* 2. The interface (mostly CPC-USB) was disconnected upon operation */ -#define CPC_ERR_NO_MATCHING_CHANNEL -8 /* the driver couldn't find a matching channel */ -#define CPC_ERR_NO_BUFFER_AVAILABLE -9 /* the driver couldn't allocate buffer for messages */ -#define CPC_ERR_NO_INTERRUPT -10 /* the requested interrupt couldn't be claimed */ -#define CPC_ERR_NO_MATCHING_INTERFACE -11 /* no interface type related to this channel was found */ -#define CPC_ERR_NO_RESOURCES -12 /* the requested resources could not be claimed */ -#define CPC_ERR_SOCKET -13 /* error concerning TCP sockets */ - -/* init error codes */ -#define CPC_ERR_WRONG_CONTROLLER_TYPE -14 /* wrong CAN controller type within initialization */ -#define CPC_ERR_NO_RESET_MODE -15 /* the controller could not be set into reset mode */ -#define CPC_ERR_NO_CAN_ACCESS -16 /* the CAN controller could not be accessed */ - -/* transmit error codes */ -#define CPC_ERR_CAN_WRONG_ID -20 /* the provided CAN id is too big */ -#define CPC_ERR_CAN_WRONG_LENGTH -21 /* the provided CAN length is too long */ -#define CPC_ERR_CAN_NO_TRANSMIT_BUF -22 /* the transmit buffer was occupied */ -#define CPC_ERR_CAN_TRANSMIT_TIMEOUT -23 /* The message could not be sent within a */ - /* specified time */ - -/* other error codes */ -#define CPC_ERR_SERVICE_NOT_SUPPORTED -30 /* the requested service is not supported by the interface */ -#define CPC_ERR_IO_TRANSFER -31 /* a transmission error down to the driver occurred */ -#define CPC_ERR_TRANSMISSION_FAILED -32 /* a transmission error down to the interface occurred */ -#define CPC_ERR_TRANSMISSION_TIMEOUT -33 /* a timeout occurred within transmission to the interface */ -#define CPC_ERR_OP_SYS_NOT_SUPPORTED -35 /* the operating system is not supported */ -#define CPC_ERR_UNKNOWN -40 /* an unknown error ocurred (mostly IOCTL errors) */ - -#define CPC_ERR_LOADING_DLL -50 /* the library 'cpcwin.dll' could not be loaded */ -#define CPC_ERR_ASSIGNING_FUNCTION -51 /* the specified function could not be assigned */ -#define CPC_ERR_DLL_INITIALIZATION -52 /* the DLL was not initialized correctly */ -#define CPC_ERR_MISSING_LICFILE -55 /* the file containing the licenses does not exist */ -#define CPC_ERR_MISSING_LICENSE -56 /* a required license was not found */ - -/* CAN state bit values. Ignore any bits not listed */ -#define CPC_CAN_STATE_BUSOFF 0x80 -#define CPC_CAN_STATE_ERROR 0x40 - -/* Mask to help ignore undefined bits */ -#define CPC_CAN_STATE_MASK 0xc0 - -/* - * CAN-Message representation in a CPC_MS - * Message object type is CPC_MSG_T_CAN or CPC_MSG_T_RTR - * or CPC_MSG_T_XCAN or CPC_MSG_T_XRTR - */ -typedef struct CPC_CAN_MSG { - u32 id; - u8 length; - u8 msg[8]; -} CPC_CAN_MSG_T; - -/* representation of the CAN parameters for the PCA82C200 controller */ -typedef struct CPC_PCA82C200_PARAMS { - u8 acc_code; /* Acceptance-code for receive, Standard: 0 */ - u8 acc_mask; /* Acceptance-mask for receive, Standard: 0xff (everything) */ - u8 btr0; /* Bus-timing register 0 */ - u8 btr1; /* Bus-timing register 1 */ - u8 outp_contr; /* Output-control register */ -} CPC_PCA82C200_PARAMS_T; - -/* representation of the CAN parameters for the SJA1000 controller */ -typedef struct CPC_SJA1000_PARAMS { - u8 mode; /* enables single or dual acceptance filtering */ - u8 acc_code0; /* Acceptance-code for receive, Standard: 0 */ - u8 acc_code1; - u8 acc_code2; - u8 acc_code3; - u8 acc_mask0; /* Acceptance-mask for receive, Standard: 0xff (everything) */ - u8 acc_mask1; - u8 acc_mask2; - u8 acc_mask3; - u8 btr0; /* Bus-timing register 0 */ - u8 btr1; /* Bus-timing register 1 */ - u8 outp_contr; /* Output-control register */ -} CPC_SJA1000_PARAMS_T; - -/* - * representation of the CAN parameters for the M16C controller - * in basic CAN mode (means no full CAN) - */ -typedef struct CPC_M16C_BASIC_PARAMS { - u8 con0; - u8 con1; - u8 ctlr0; - u8 ctlr1; - u8 clk; - u8 acc_std_code0; - u8 acc_std_code1; - u8 acc_ext_code0; - u8 acc_ext_code1; - u8 acc_ext_code2; - u8 acc_ext_code3; - u8 acc_std_mask0; - u8 acc_std_mask1; - u8 acc_ext_mask0; - u8 acc_ext_mask1; - u8 acc_ext_mask2; - u8 acc_ext_mask3; -} CPC_M16C_BASIC_PARAMS_T; - -/* CAN params message representation */ -typedef struct CPC_CAN_PARAMS { - u8 cc_type; /* represents the controller type */ - union { - CPC_M16C_BASIC_PARAMS_T m16c_basic; - CPC_SJA1000_PARAMS_T sja1000; - CPC_PCA82C200_PARAMS_T pca82c200; - } cc_params; -} CPC_CAN_PARAMS_T; - -/* CHAN init params representation */ -typedef struct CPC_CHAN_PARAMS { - int fd; -} CPC_CHAN_PARAMS_T; - -/* CAN init params message representation */ -typedef struct CPC_INIT_PARAMS { - CPC_CHAN_PARAMS_T chanparams; - CPC_CAN_PARAMS_T canparams; -} CPC_INIT_PARAMS_T; - -/* structure for confirmed message handling */ -typedef struct CPC_CONFIRM { - u8 result; /* error code */ -} CPC_CONFIRM_T; - -/* structure for information requests */ -typedef struct CPC_INFO { - u8 source; /* interface, driver or library */ - u8 type; /* version or serial number */ - char msg[CPC_MSG_LEN - 2]; /* string holding the requested information */ -} CPC_INFO_T; - -/* - * OVERRUN - * In general two types of overrun may occur. - * A hardware overrun, where the CAN controller - * lost a message, because the interrupt was - * not handled before the next messgae comes in. - * Or a software overrun, where i.e. a received - * message could not be stored in the CPC_MSG - * buffer. - */ - -/* After a software overrun has occurred - * we wait until we have CPC_OVR_GAP slots - * free in the CPC_MSG buffer. - */ -#define CPC_OVR_GAP 10 - -/* - * Two types of software overrun may occur. - * A received CAN message or a CAN state event - * can cause an overrun. - * Note: A CPC_CMD which would normally store - * its result immediately in the CPC_MSG - * queue may fail, because the message queue is full. - * This will not generate an overrun message, but - * will halt command execution, until this command - * is able to store its message in the message queue. - */ -#define CPC_OVR_EVENT_CAN 0x01 -#define CPC_OVR_EVENT_CANSTATE 0x02 -#define CPC_OVR_EVENT_BUSERROR 0x04 - -/* - * If the CAN controller lost a message - * we indicate it with the highest bit - * set in the count field. - */ -#define CPC_OVR_HW 0x80 - -/* structure for overrun conditions */ -typedef struct { - u8 event; - u8 count; -} CPC_OVERRUN_T; - -/* - * CAN errors - * Each CAN controller type has different - * registers to record errors. - * Therefor a structure containing the specific - * errors is set up for each controller here - */ - -/* - * SJA1000 error structure - * see the SJA1000 datasheet for detailed - * explanation of the registers - */ -typedef struct CPC_SJA1000_CAN_ERROR { - u8 ecc; /* error capture code register */ - u8 rxerr; /* RX error counter register */ - u8 txerr; /* TX error counter register */ -} CPC_SJA1000_CAN_ERROR_T; - -/* - * M16C error structure - * see the M16C datasheet for detailed - * explanation of the registers - */ -typedef struct CPC_M16C_CAN_ERROR { - u8 tbd; /* to be defined */ -} CPC_M16C_CAN_ERROR_T; - -/* structure for CAN error conditions */ -#define CPC_CAN_ECODE_ERRFRAME 0x01 -typedef struct CPC_CAN_ERROR { - u8 ecode; - struct { - u8 cc_type; /* CAN controller type */ - union { - CPC_SJA1000_CAN_ERROR_T sja1000; - CPC_M16C_CAN_ERROR_T m16c; - } regs; - } cc; -} CPC_CAN_ERROR_T; - -/* - * Structure containing RX/TX error counter. - * This structure is used to request the - * values of the CAN controllers TX and RX - * error counter. - */ -typedef struct CPC_CAN_ERR_COUNTER { - u8 rx; - u8 tx; -} CPC_CAN_ERR_COUNTER_T; - -/* If this flag is set, transmissions from PC to CPC are protected against loss */ -#define CPC_SECURE_TO_CPC 0x01 - -/* If this flag is set, transmissions from CPC to PC are protected against loss */ -#define CPC_SECURE_TO_PC 0x02 - -/* If this flag is set, the CAN-transmit buffer is checked to be free before sending a message */ -#define CPC_SECURE_SEND 0x04 - -/* - * If this flag is set, the transmission complete flag is checked - * after sending a message - * THIS IS CURRENTLY ONLY IMPLEMENTED IN THE PASSIVE INTERFACE DRIVERS - */ -#define CPC_SECURE_TRANSMIT 0x08 - -/* main message type used between library and application */ -typedef struct CPC_MSG { - u8 type; /* type of message */ - u8 length; /* length of data within union 'msg' */ - u8 msgid; /* confirmation handle */ - u32 ts_sec; /* timestamp in seconds */ - u32 ts_nsec; /* timestamp in nano seconds */ - union { - u8 generic[CPC_MSG_LEN]; - CPC_CAN_MSG_T canmsg; - CPC_CAN_PARAMS_T canparams; - CPC_CONFIRM_T confirmation; - CPC_INFO_T info; - CPC_OVERRUN_T overrun; - CPC_CAN_ERROR_T error; - CPC_CAN_ERR_COUNTER_T err_counter; - u8 busload; - u8 canstate; - } msg; -} CPC_MSG_T; - -#endif /* CPC_HEADER */ diff --git a/drivers/staging/cpc-usb/cpc_int.h b/drivers/staging/cpc-usb/cpc_int.h deleted file mode 100644 index 38674e9690a..00000000000 --- a/drivers/staging/cpc-usb/cpc_int.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * CPCLIB - * - * Copyright (C) 2000-2008 EMS Dr. Thomas Wuensche - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - */ -#ifndef CPC_INT_H -#define CPC_INT_H - -#include <linux/wait.h> - -#define CPC_MSG_BUF_CNT 1500 - -#define CPC_PROC_DIR "driver/" - -#undef dbg -#undef err -#undef info - -/* Use our own dbg macro */ -#define dbg(format, arg...) do { if (debug) printk( KERN_INFO format "\n" , ## arg); } while (0) -#define err(format, arg...) do { printk( KERN_INFO "ERROR " format "\n" , ## arg); } while (0) -#define info(format, arg...) do { printk( KERN_INFO format "\n" , ## arg); } while (0) - -/* Macros help using of our buffers */ -#define IsBufferFull(x) (!(x)->WnR) && ((x)->iidx == (x)->oidx) -#define IsBufferEmpty(x) ((x)->WnR) && ((x)->iidx == (x)->oidx) -#define IsBufferNotEmpty(x) (!(x)->WnR) || ((x)->iidx != (x)->oidx) -#define ResetBuffer(x) do { (x)->oidx = (x)->iidx=0; (x)->WnR = 1; } while(0); - -#define CPC_BufWriteAllowed ((chan->oidx != chan->iidx) || chan->WnR) - -typedef void (*chan_write_byte_t) (void *chan, unsigned int reg, - unsigned char val); -typedef unsigned char (*chan_read_byte_t) (void *chan, unsigned int reg); - -typedef struct CPC_CHAN { - void __iomem * canBase; /* base address of SJA1000 */ - chan_read_byte_t read_byte; /* CAN controller read access routine */ - chan_write_byte_t write_byte; /* CAN controller write access routine */ - CPC_MSG_T *buf; /* buffer for CPC msg */ - unsigned int iidx; - unsigned int oidx; - unsigned int WnR; - unsigned int minor; - unsigned int locked; - unsigned int irqDisabled; - - unsigned char cpcCtrlCANMessage; - unsigned char cpcCtrlCANState; - unsigned char cpcCtrlBUSState; - - unsigned char controllerType; - - unsigned long ovrTimeSec; - unsigned long ovrTimeNSec; - unsigned long ovrLockedBuffer; - CPC_OVERRUN_T ovr; - - /* for debugging only */ - unsigned int handledIrqs; - unsigned int lostMessages; - - unsigned int sentStdCan; - unsigned int sentExtCan; - unsigned int sentStdRtr; - unsigned int sentExtRtr; - - unsigned int recvStdCan; - unsigned int recvExtCan; - unsigned int recvStdRtr; - unsigned int recvExtRtr; - - wait_queue_head_t *CPCWait_q; - - void *private; -} CPC_CHAN_T; - -#endif diff --git a/drivers/staging/cpc-usb/cpcusb.h b/drivers/staging/cpc-usb/cpcusb.h deleted file mode 100644 index 6bdf30be239..00000000000 --- a/drivers/staging/cpc-usb/cpcusb.h +++ /dev/null @@ -1,86 +0,0 @@ -/* Header for CPC-USB Driver ******************** - * Copyright 1999, 2000, 2001 - * - * Company: EMS Dr. Thomas Wuensche - * Sonnenhang 3 - * 85304 Ilmmuenster - * Phone: +49-8441-490260 - * Fax: +49-8441-81860 - * email: support@ems-wuensche.com - * WWW: www.ems-wuensche.com - */ - -#ifndef CPCUSB_H -#define CPCUSB_H - -#undef err -#undef dbg -#undef info - -/* Use our own dbg macro */ -#define dbg(format, arg...) do { if (debug) printk(KERN_INFO "CPC-USB: " format "\n" , ## arg); } while (0) -#define info(format, arg...) do { printk(KERN_INFO "CPC-USB: " format "\n" , ## arg); } while (0) -#define err(format, arg...) do { printk(KERN_INFO "CPC-USB(ERROR): " format "\n" , ## arg); } while (0) - -#define CPC_USB_CARD_CNT 4 - -typedef struct CPC_USB_READ_URB { - unsigned char *buffer; /* the buffer to send data */ - size_t size; /* the size of the send buffer */ - struct urb *urb; /* the urb used to send data */ -} CPC_USB_READ_URB_T; - -typedef struct CPC_USB_WRITE_URB { - unsigned char *buffer; /* the buffer to send data */ - size_t size; /* the size of the send buffer */ - struct urb *urb; /* the urb used to send data */ - atomic_t busy; /* true if write urb is busy */ - struct completion finished; /* wait for the write to finish */ -} CPC_USB_WRITE_URB_T; - -#define CPC_USB_URB_CNT 10 - -typedef struct CPC_USB { - struct usb_device *udev; /* save off the usb device pointer */ - struct usb_interface *interface; /* the interface for this device */ - unsigned char minor; /* the starting minor number for this device */ - unsigned char num_ports; /* the number of ports this device has */ - int num_intr_in; /* number of interrupt in endpoints we have */ - int num_bulk_in; /* number of bulk in endpoints we have */ - int num_bulk_out; /* number of bulk out endpoints we have */ - - CPC_USB_READ_URB_T urbs[CPC_USB_URB_CNT]; - - unsigned char intr_in_buffer[4]; /* interrupt transfer buffer */ - struct urb *intr_in_urb; /* interrupt transfer urb */ - - CPC_USB_WRITE_URB_T wrUrbs[CPC_USB_URB_CNT]; - - int open; /* if the port is open or not */ - int present; /* if the device is not disconnected */ - struct semaphore sem; /* locks this structure */ - - int free_slots; /* free send slots of CPC-USB */ - int idx; - - spinlock_t slock; - - char serialNumber[128]; /* serial number */ - int productId; /* product id to differ between M16C and LPC2119 */ - CPC_CHAN_T *chan; -} CPC_USB_T; - -#define CPCTable CPCUSB_Table - -#define CPC_DRIVER_VERSION "0.724" -#define CPC_DRIVER_SERIAL "not applicable" - -#define OBUF_SIZE 255 /* 4096 */ - -/* read timeouts -- RD_NAK_TIMEOUT * RD_EXPIRE = Number of seconds */ -#define RD_NAK_TIMEOUT (10*HZ) /* Default number of X seconds to wait */ -#define RD_EXPIRE 12 /* Number of attempts to wait X seconds */ - -#define CPC_USB_BASE_MNR 0 /* CPC-USB start at minor 0 */ - -#endif diff --git a/drivers/staging/cpc-usb/sja2m16c.h b/drivers/staging/cpc-usb/sja2m16c.h deleted file mode 100644 index 654bd3fc91d..00000000000 --- a/drivers/staging/cpc-usb/sja2m16c.h +++ /dev/null @@ -1,41 +0,0 @@ -#ifndef _SJA2M16C_H -#define _SJA2M16C_H - -#include "cpc.h" - -#define BAUDRATE_TOLERANCE_PERCENT 1 -#define SAMPLEPOINT_TOLERANCE_PERCENT 5 -#define SAMPLEPOINT_UPPER_LIMIT 88 - -/* M16C parameters */ -struct FIELD_C0CONR { - unsigned int brp:4; - unsigned int sam:1; - unsigned int pr:3; - unsigned int dummy:8; -}; -struct FIELD_C1CONR { - unsigned int ph1:3; - unsigned int ph2:3; - unsigned int sjw:2; - unsigned int dummy:8; -}; -typedef union C0CONR { - unsigned char c0con; - struct FIELD_C0CONR bc0con; -} C0CONR_T; -typedef union C1CONR { - unsigned char c1con; - struct FIELD_C1CONR bc1con; -} C1CONR_T; - -#define SJA_TSEG1 ((pParams->btr1 & 0x0f)+1) -#define SJA_TSEG2 (((pParams->btr1 & 0x70)>>4)+1) -#define SJA_BRP ((pParams->btr0 & 0x3f)+1) -#define SJA_SJW ((pParams->btr0 & 0xc0)>>6) -#define SJA_SAM ((pParams->btr1 & 0x80)>>7) -int baudrate_m16c(int clk, int brp, int pr, int ph1, int ph2); -int samplepoint_m16c(int brp, int pr, int ph1, int ph2); -int SJA1000_TO_M16C_BASIC_Params(CPC_MSG_T *pMsg); - -#endif diff --git a/drivers/staging/cpc-usb/sja2m16c_2.c b/drivers/staging/cpc-usb/sja2m16c_2.c deleted file mode 100644 index bf0230fb778..00000000000 --- a/drivers/staging/cpc-usb/sja2m16c_2.c +++ /dev/null @@ -1,452 +0,0 @@ -/**************************************************************************** -* -* Copyright (c) 2003,2004 by EMS Dr. Thomas Wuensche -* -* - All rights reserved - -* -* This code is provided "as is" without warranty of any kind, either -* expressed or implied, including but not limited to the liability -* concerning the freedom from material defects, the fitness for parti- -* cular purposes or the freedom of proprietary rights of third parties. -* -***************************************************************************** -* Module name.: cpcusb -***************************************************************************** -* Include file: cpc.h -***************************************************************************** -* Project.....: Windows Driver Development Kit -* Filename....: sja2m16c.cpp -* Authors.....: (GU) Gerhard Uttenthaler -* (CS) Christian Schoett -***************************************************************************** -* Short descr.: converts baudrate between SJA1000 and M16C -***************************************************************************** -* Description.: handles the baudrate conversion from SJA1000 parameters to -* M16C parameters -***************************************************************************** -* Address : EMS Dr. Thomas Wuensche -* Sonnenhang 3 -* D-85304 Ilmmuenster -* Tel. : +49-8441-490260 -* Fax. : +49-8441-81860 -* email: support@ems-wuensche.com -***************************************************************************** -* History -***************************************************************************** -* Version Date Auth Remark -* -* 01.00 ?? GU - initial release -* 01.10 ?????????? CS - adapted to fit into the USB Windows driver -* 02.00 18.08.2004 GU - improved the baudrate calculating algorithm -* - implemented acceptance filtering -* 02.10 10.09.2004 CS - adapted to fit into the USB Windows driver -***************************************************************************** -* ToDo's -***************************************************************************** -*/ - -/****************************************************************************/ -/* I N C L U D E S -*/ -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> -#include <linux/module.h> -#include <linux/poll.h> -#include <linux/smp_lock.h> -#include <linux/completion.h> -#include <asm/uaccess.h> -#include <linux/usb.h> - -#include "cpc.h" -#include "cpc_int.h" -#include "cpcusb.h" - -#include "sja2m16c.h" - -/*********************************************************************/ -int baudrate_m16c(int clk, int brp, int pr, int ph1, int ph2) -{ - return (16000000 / (1 << clk)) / 2 / (brp + 1) / (1 + pr + 1 + - ph1 + 1 + ph2 + - 1); -} - - -/*********************************************************************/ -int samplepoint_m16c(int brp, int pr, int ph1, int ph2) -{ - return (100 * (1 + pr + 1 + ph1 + 1)) / (1 + pr + 1 + ph1 + 1 + - ph2 + 1); -} - - -/**************************************************************************** -* Function.....: SJA1000_TO_M16C_BASIC_Params -* -* Task.........: This routine converts SJA1000 CAN btr parameters into M16C -* parameters based on the sample point and the error. In -* addition it converts the acceptance filter parameters to -* suit the M16C parameters -* -* Parameters...: None -* -* Return values: None -* -* Comments.....: -***************************************************************************** -* History -***************************************************************************** -* 19.01.2005 CS - modifed the conversion of SJA1000 filter params into -* M16C params. Due to compatibility reasons with the -* older 82C200 CAN controller the SJA1000 -****************************************************************************/ -int SJA1000_TO_M16C_BASIC_Params(CPC_MSG_T * in) -{ - int sjaBaudrate; - int sjaSamplepoint; - int *baudrate_error; // BRP[0..15], PR[0..7], PH1[0..7], PH2[0..7] - int *samplepoint_error; // BRP[0..15], PR[0..7], PH1[0..7], PH2[0..7] - int baudrate_error_merk; - int clk, brp, pr, ph1, ph2; - int clk_merk, brp_merk, pr_merk, ph1_merk, ph2_merk; - int index; - unsigned char acc_code0, acc_code1, acc_code2, acc_code3; - unsigned char acc_mask0, acc_mask1, acc_mask2, acc_mask3; - CPC_MSG_T * out; - C0CONR_T c0con; - C1CONR_T c1con; - int tmpAccCode; - int tmpAccMask; - - // we have to convert the parameters into M16C parameters - CPC_SJA1000_PARAMS_T * pParams; - - // check if the type is CAN parameters and if we have to convert the given params - if (in->type != CPC_CMD_T_CAN_PRMS - || in->msg.canparams.cc_type != SJA1000) - return 0; - pParams = - (CPC_SJA1000_PARAMS_T *) & in->msg.canparams.cc_params.sja1000; - acc_code0 = pParams->acc_code0; - acc_code1 = pParams->acc_code1; - acc_code2 = pParams->acc_code2; - acc_code3 = pParams->acc_code3; - acc_mask0 = pParams->acc_mask0; - acc_mask1 = pParams->acc_mask1; - acc_mask2 = pParams->acc_mask2; - acc_mask3 = pParams->acc_mask3; - -#ifdef _DEBUG_OUTPUT_CAN_PARAMS - info("acc_code0: %2.2Xh\n", acc_code0); - info("acc_code1: %2.2Xh\n", acc_code1); - info("acc_code2: %2.2Xh\n", acc_code2); - info("acc_code3: %2.2Xh\n", acc_code3); - info("acc_mask0: %2.2Xh\n", acc_mask0); - info("acc_mask1: %2.2Xh\n", acc_mask1); - info("acc_mask2: %2.2Xh\n", acc_mask2); - info("acc_mask3: %2.2Xh\n", acc_mask3); - -#endif /* */ - if (! - (baudrate_error = - (int *) vmalloc(sizeof(int) * 16 * 8 * 8 * 8 * 5))) { - err("Could not allocate memory\n"); - return -3; - } - if (! - (samplepoint_error = - (int *) vmalloc(sizeof(int) * 16 * 8 * 8 * 8 * 5))) { - err("Could not allocate memory\n"); - vfree(baudrate_error); - return -3; - } - memset(baudrate_error, 0xff, sizeof(baudrate_error)); - memset(samplepoint_error, 0xff, sizeof(baudrate_error)); - sjaBaudrate = - 16000000 / 2 / SJA_BRP / (1 + SJA_TSEG1 + SJA_TSEG2); - sjaSamplepoint = - 100 * (1 + SJA_TSEG1) / (1 + SJA_TSEG1 + SJA_TSEG2); - if (sjaBaudrate == 0) { - vfree(baudrate_error); - vfree(samplepoint_error); - return -2; - } - -#ifdef _DEBUG_OUTPUT_CAN_PARAMS - info("\nStarting SJA CAN params\n"); - info("-------------------------\n"); - info("TS1 : %2.2Xh TS2 : %2.2Xh\n", SJA_TSEG1, SJA_TSEG2); - info("BTR0 : %2.2Xh BTR1: %2.2Xh\n", pParams->btr0, - pParams->btr1); - info("Baudrate: %d.%dkBaud\n", sjaBaudrate / 1000, - sjaBaudrate % 1000); - info("Sample P: 0.%d\n", sjaSamplepoint); - info("\n"); - -#endif /* */ - c0con.bc0con.sam = SJA_SAM; - c1con.bc1con.sjw = SJA_SJW; - - // calculate errors for all baudrates - index = 0; - for (clk = 0; clk < 5; clk++) { - for (brp = 0; brp < 16; brp++) { - for (pr = 0; pr < 8; pr++) { - for (ph1 = 0; ph1 < 8; ph1++) { - for (ph2 = 0; ph2 < 8; ph2++) { - baudrate_error[index] = - 100 * - abs(baudrate_m16c - (clk, brp, pr, ph1, - ph2) - - sjaBaudrate) / - sjaBaudrate; - samplepoint_error[index] = - abs(samplepoint_m16c - (brp, pr, ph1, - ph2) - - sjaSamplepoint); - -#if 0 - info - ("Baudrate : %d kBaud\n", - baudrate_m16c(clk, - brp, pr, - ph1, - ph2)); - info - ("Baudrate Error: %d\n", - baudrate_error - [index]); - info - ("Sample P Error: %d\n", - samplepoint_error - [index]); - info - ("clk : %d\n", - clk); - -#endif /* */ - index++; - } - } - } - } - } - - // mark all baudrate_error entries which are outer limits - index = 0; - for (clk = 0; clk < 5; clk++) { - for (brp = 0; brp < 16; brp++) { - for (pr = 0; pr < 8; pr++) { - for (ph1 = 0; ph1 < 8; ph1++) { - for (ph2 = 0; ph2 < 8; ph2++) { - if ((baudrate_error[index] - > - BAUDRATE_TOLERANCE_PERCENT) - || - (samplepoint_error - [index] > - SAMPLEPOINT_TOLERANCE_PERCENT) - || - (samplepoint_m16c - (brp, pr, ph1, - ph2) > - SAMPLEPOINT_UPPER_LIMIT)) - { - baudrate_error - [index] = -1; - } else - if (((1 + pr + 1 + - ph1 + 1 + ph2 + - 1) < 8) - || - ((1 + pr + 1 + - ph1 + 1 + ph2 + - 1) > 25)) { - baudrate_error - [index] = -1; - } - -#if 0 - else { - info - ("Baudrate : %d kBaud\n", - baudrate_m16c - (clk, brp, pr, - ph1, ph2)); - info - ("Baudrate Error: %d\n", - baudrate_error - [index]); - info - ("Sample P Error: %d\n", - samplepoint_error - [index]); - } - -#endif /* */ - index++; - } - } - } - } - } - - // find list of minimum of baudrate_error within unmarked entries - clk_merk = brp_merk = pr_merk = ph1_merk = ph2_merk = 0; - baudrate_error_merk = 100; - index = 0; - for (clk = 0; clk < 5; clk++) { - for (brp = 0; brp < 16; brp++) { - for (pr = 0; pr < 8; pr++) { - for (ph1 = 0; ph1 < 8; ph1++) { - for (ph2 = 0; ph2 < 8; ph2++) { - if (baudrate_error[index] - != -1) { - if (baudrate_error - [index] < - baudrate_error_merk) - { - baudrate_error_merk - = - baudrate_error - [index]; - brp_merk = - brp; - pr_merk = - pr; - ph1_merk = - ph1; - ph2_merk = - ph2; - clk_merk = - clk; - -#if 0 - info - ("brp: %2.2Xh pr: %2.2Xh ph1: %2.2Xh ph2: %2.2Xh\n", - brp, - pr, - ph1, - ph2); - info - ("Baudrate : %d kBaud\n", - baudrate_m16c - (clk, - brp, - pr, - ph1, - ph2)); - info - ("Baudrate Error: %d\n", - baudrate_error - [index]); - info - ("Sample P Error: %d\n", - samplepoint_error - [index]); - -#endif /* */ - } - } - index++; - } - } - } - } - } - if (baudrate_error_merk == 100) { - info("ERROR: Could not convert CAN init parameter\n"); - vfree(baudrate_error); - vfree(samplepoint_error); - return -1; - } - - // setting m16c CAN parameter - c0con.bc0con.brp = brp_merk; - c0con.bc0con.pr = pr_merk; - c1con.bc1con.ph1 = ph1_merk; - c1con.bc1con.ph2 = ph2_merk; - -#ifdef _DEBUG_OUTPUT_CAN_PARAMS - info("\nResulting M16C CAN params\n"); - info("-------------------------\n"); - info("clk : %2.2Xh\n", clk_merk); - info("ph1 : %2.2Xh ph2: %2.2Xh\n", c1con.bc1con.ph1 + 1, - c1con.bc1con.ph2 + 1); - info("pr : %2.2Xh brp: %2.2Xh\n", c0con.bc0con.pr + 1, - c0con.bc0con.brp + 1); - info("sjw : %2.2Xh sam: %2.2Xh\n", c1con.bc1con.sjw, - c0con.bc0con.sam); - info("co1 : %2.2Xh co0: %2.2Xh\n", c1con.c1con, c0con.c0con); - info("Baudrate: %d.%dBaud\n", - baudrate_m16c(clk_merk, c0con.bc0con.brp, c0con.bc0con.pr, - c1con.bc1con.ph1, c1con.bc1con.ph2) / 1000, - baudrate_m16c(clk_merk, c0con.bc0con.brp, c0con.bc0con.pr, - c1con.bc1con.ph1, c1con.bc1con.ph2) % 1000); - info("Sample P: 0.%d\n", - samplepoint_m16c(c0con.bc0con.brp, c0con.bc0con.pr, - c1con.bc1con.ph1, c1con.bc1con.ph2)); - info("\n"); - -#endif /* */ - out = in; - out->type = 6; - out->length = sizeof(CPC_M16C_BASIC_PARAMS_T) + 1; - out->msg.canparams.cc_type = M16C_BASIC; - out->msg.canparams.cc_params.m16c_basic.con0 = c0con.c0con; - out->msg.canparams.cc_params.m16c_basic.con1 = c1con.c1con; - out->msg.canparams.cc_params.m16c_basic.ctlr0 = 0x4C; - out->msg.canparams.cc_params.m16c_basic.ctlr1 = 0x00; - out->msg.canparams.cc_params.m16c_basic.clk = clk_merk; - out->msg.canparams.cc_params.m16c_basic.acc_std_code0 = - acc_code0; - out->msg.canparams.cc_params.m16c_basic.acc_std_code1 = acc_code1; - -// info("code0: 0x%2.2X, code1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_code0, out->msg.canparams.cc_params.m16c_basic.acc_std_code1); - tmpAccCode = (acc_code1 >> 5) + (acc_code0 << 3); - out->msg.canparams.cc_params.m16c_basic.acc_std_code0 = - (unsigned char) tmpAccCode; - out->msg.canparams.cc_params.m16c_basic.acc_std_code1 = - (unsigned char) (tmpAccCode >> 8); - -// info("code0: 0x%2.2X, code1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_code0, out->msg.canparams.cc_params.m16c_basic.acc_std_code1); - out->msg.canparams.cc_params.m16c_basic.acc_std_mask0 = - ~acc_mask0; - out->msg.canparams.cc_params.m16c_basic.acc_std_mask1 = - ~acc_mask1; - -// info("mask0: 0x%2.2X, mask1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_mask0, out->msg.canparams.cc_params.m16c_basic.acc_std_mask1); - tmpAccMask = ((acc_mask1) >> 5) + ((acc_mask0) << 3); - -// info("tmpAccMask: 0x%4.4X\n", tmpAccMask); - out->msg.canparams.cc_params.m16c_basic.acc_std_mask0 = - (unsigned char) ~tmpAccMask; - out->msg.canparams.cc_params.m16c_basic.acc_std_mask1 = - (unsigned char) ~(tmpAccMask >> 8); - -// info("mask0: 0x%2.2X, mask1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_mask0, out->msg.canparams.cc_params.m16c_basic.acc_std_mask1); - out->msg.canparams.cc_params.m16c_basic.acc_ext_code0 = - (unsigned char) tmpAccCode; - out->msg.canparams.cc_params.m16c_basic.acc_ext_code1 = - (unsigned char) (tmpAccCode >> 8); - out->msg.canparams.cc_params.m16c_basic.acc_ext_code2 = acc_code2; - out->msg.canparams.cc_params.m16c_basic.acc_ext_code3 = acc_code3; - out->msg.canparams.cc_params.m16c_basic.acc_ext_mask0 = - (unsigned char) ~tmpAccMask; - out->msg.canparams.cc_params.m16c_basic.acc_ext_mask1 = - (unsigned char) ~(tmpAccMask >> 8); - out->msg.canparams.cc_params.m16c_basic.acc_ext_mask2 = - ~acc_mask2; - out->msg.canparams.cc_params.m16c_basic.acc_ext_mask3 = - ~acc_mask3; - vfree(baudrate_error); - vfree(samplepoint_error); - return 0; -} - - |