USB: OHCI handles more ZFMicro quirks

The ZF Micro OHCI controller exhibits unexpected behavior that seems to be
related to high load.  Under certain conditions, the controller will
complete a TD, remove it from the endpoint's queue, and fail to add it to
the donelist. This causes the endpoint to appear to stop responding. Worse,
if the device is removed while in that state, OHCI will hang while waiting
for the orphaned TD to complete.  The situation is not recoverable without
rebooting.

This fix enhances the scope of the existing OHCI_QUIRK_ZFMICRO flag:

 1. A watchdog routine periodically scans the OHCI structures to check
    for orphaned TDs. In these cases the TD is taken back from the
    controller and completed normally.

 2. If a device is removed while the endpoint is hung but before the
    watchdog catches the situation, any outstanding TDs are taken back
    from the controller in the 'sanitize' phase.

The ohci-hcd driver used to print "INTR_SF lossage" in this situation;
this changes it to the universally accurate "ED unlink timeout".  Other
instances of this message presumably have different root causes.

Both this Compaq quirk and a NEC quirk are now properly compiled out for
non-PCI builds of this driver.

Signed-off-by: Mike Nuss <mike@terascala.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

5 files changed, 253 insertions, 75 deletions

diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 6edf4097d2d..d673cb9c36b 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -81,7 +81,6 @@ static void ohci_dump (struct ohci_hcd *ohci, int verbose);
 static int ohci_init (struct ohci_hcd *ohci);
 static void ohci_stop (struct usb_hcd *hcd);
 static int ohci_restart (struct ohci_hcd *ohci);
-static void ohci_quirk_nec_worker (struct work_struct *work);
 
 #include "ohci-hub.c"
 #include "ohci-dbg.c"
@@ -314,6 +313,8 @@ rescan:
 	if (!HC_IS_RUNNING (hcd->state)) {
 sanitize:
 		ed->state = ED_IDLE;
+		if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
+			ohci->eds_scheduled--;
 		finish_unlinks (ohci, 0);
 	}
 
@@ -321,7 +322,12 @@ sanitize:
 	case ED_UNLINK:		/* wait for hw to finish? */
 		/* major IRQ delivery trouble loses INTR_SF too... */
 		if (limit-- == 0) {
-			ohci_warn (ohci, "IRQ INTR_SF lossage\n");
+			ohci_warn(ohci, "ED unlink timeout\n");
+			if (quirk_zfmicro(ohci)) {
+				ohci_warn(ohci, "Attempting ZF TD recovery\n");
+				ohci->ed_to_check = ed;
+				ohci->zf_delay = 2;
+			}
 			goto sanitize;
 		}
 		spin_unlock_irqrestore (&ohci->lock, flags);
@@ -379,6 +385,93 @@ ohci_shutdown (struct usb_hcd *hcd)
 	(void) ohci_readl (ohci, &ohci->regs->control);
 }
 
+static int check_ed(struct ohci_hcd *ohci, struct ed *ed)
+{
+	return (hc32_to_cpu(ohci, ed->hwINFO) & ED_IN) != 0
+		&& (hc32_to_cpu(ohci, ed->hwHeadP) & TD_MASK)
+			== (hc32_to_cpu(ohci, ed->hwTailP) & TD_MASK)
+		&& !list_empty(&ed->td_list);
+}
+
+/* ZF Micro watchdog timer callback. The ZF Micro chipset sometimes completes
+ * an interrupt TD but neglects to add it to the donelist.  On systems with
+ * this chipset, we need to periodically check the state of the queues to look
+ * for such "lost" TDs.
+ */
+static void unlink_watchdog_func(unsigned long _ohci)
+{
+	long		flags;
+	unsigned	max;
+	unsigned	seen_count = 0;
+	unsigned	i;
+	struct ed	**seen = NULL;
+	struct ohci_hcd	*ohci = (struct ohci_hcd *) _ohci;
+
+	spin_lock_irqsave(&ohci->lock, flags);
+	max = ohci->eds_scheduled;
+	if (!max)
+		goto done;
+
+	if (ohci->ed_to_check)
+		goto out;
+
+	seen = kcalloc(max, sizeof *seen, GFP_ATOMIC);
+	if (!seen)
+		goto out;
+
+	for (i = 0; i < NUM_INTS; i++) {
+		struct ed	*ed = ohci->periodic[i];
+
+		while (ed) {
+			unsigned	temp;
+
+			/* scan this branch of the periodic schedule tree */
+			for (temp = 0; temp < seen_count; temp++) {
+				if (seen[temp] == ed) {
+					/* we've checked it and what's after */
+					ed = NULL;
+					break;
+				}
+			}
+			if (!ed)
+				break;
+			seen[seen_count++] = ed;
+			if (!check_ed(ohci, ed)) {
+				ed = ed->ed_next;
+				continue;
+			}
+
+			/* HC's TD list is empty, but HCD sees at least one
+			 * TD that's not been sent through the donelist.
+			 */
+			ohci->ed_to_check = ed;
+			ohci->zf_delay = 2;
+
+			/* The HC may wait until the next frame to report the
+			 * TD as done through the donelist and INTR_WDH.  (We
+			 * just *assume* it's not a multi-TD interrupt URB;
+			 * those could defer the IRQ more than one frame, using
+			 * DI...)  Check again after the next INTR_SF.
+			 */
+			ohci_writel(ohci, OHCI_INTR_SF,
+					&ohci->regs->intrstatus);
+			ohci_writel(ohci, OHCI_INTR_SF,
+					&ohci->regs->intrenable);
+
+			/* flush those writes */
+			(void) ohci_readl(ohci, &ohci->regs->control);
+
+			goto out;
+		}
+	}
+out:
+	kfree(seen);
+	if (ohci->eds_scheduled)
+		mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
+done:
+	spin_unlock_irqrestore(&ohci->lock, flags);
+}
+
 /*-------------------------------------------------------------------------*
  * HC functions
  *-------------------------------------------------------------------------*/
@@ -616,6 +709,15 @@ retry:
 	mdelay ((temp >> 23) & 0x1fe);
 	hcd->state = HC_STATE_RUNNING;
 
+	if (quirk_zfmicro(ohci)) {
+		/* Create timer to watch for bad queue state on ZF Micro */
+		setup_timer(&ohci->unlink_watchdog, unlink_watchdog_func,
+				(unsigned long) ohci);
+
+		ohci->eds_scheduled = 0;
+		ohci->ed_to_check = NULL;
+	}
+
 	ohci_dump (ohci, 1);
 
 	return 0;
@@ -629,10 +731,11 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 {
 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
 	struct ohci_regs __iomem *regs = ohci->regs;
- 	int			ints; 
+	int			ints;
 
 	/* we can eliminate a (slow) ohci_readl()
-	   if _only_ WDH caused this irq */
+	 * if _only_ WDH caused this irq
+	 */
 	if ((ohci->hcca->done_head != 0)
 			&& ! (hc32_to_cpup (ohci, &ohci->hcca->done_head)
 				& 0x01)) {
@@ -651,7 +754,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 
 	if (ints & OHCI_INTR_UE) {
 		// e.g. due to PCI Master/Target Abort
-		if (ohci->flags & OHCI_QUIRK_NEC) {
+		if (quirk_nec(ohci)) {
 			/* Workaround for a silicon bug in some NEC chips used
 			 * in Apple's PowerBooks. Adapted from Darwin code.
 			 */
@@ -713,6 +816,31 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 			ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrenable);
 	}
 
+	if (quirk_zfmicro(ohci) && (ints & OHCI_INTR_SF)) {
+		spin_lock(&ohci->lock);
+		if (ohci->ed_to_check) {
+			struct ed *ed = ohci->ed_to_check;
+
+			if (check_ed(ohci, ed)) {
+				/* HC thinks the TD list is empty; HCD knows
+				 * at least one TD is outstanding
+				 */
+				if (--ohci->zf_delay == 0) {
+					struct td *td = list_entry(
+						ed->td_list.next,
+						struct td, td_list);
+					ohci_warn(ohci,
+						  "Reclaiming orphan TD %p\n",
+						  td);
+					takeback_td(ohci, td);
+					ohci->ed_to_check = NULL;
+				}
+			} else
+				ohci->ed_to_check = NULL;
+		}
+		spin_unlock(&ohci->lock);
+	}
+
 	/* could track INTR_SO to reduce available PCI/... bandwidth */
 
 	/* handle any pending URB/ED unlinks, leaving INTR_SF enabled
@@ -721,7 +849,9 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 	spin_lock (&ohci->lock);
 	if (ohci->ed_rm_list)
 		finish_unlinks (ohci, ohci_frame_no(ohci));
-	if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
+	if ((ints & OHCI_INTR_SF) != 0
+			&& !ohci->ed_rm_list
+			&& !ohci->ed_to_check
 			&& HC_IS_RUNNING(hcd->state))
 		ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);
 	spin_unlock (&ohci->lock);
@@ -751,6 +881,9 @@ static void ohci_stop (struct usb_hcd *hcd)
 	free_irq(hcd->irq, hcd);
 	hcd->irq = -1;
 
+	if (quirk_zfmicro(ohci))
+		del_timer(&ohci->unlink_watchdog);
+
 	remove_debug_files (ohci);
 	ohci_mem_cleanup (ohci);
 	if (ohci->hcca) {
@@ -828,27 +961,6 @@ static int ohci_restart (struct ohci_hcd *ohci)
 
 /*-------------------------------------------------------------------------*/
 
-/* NEC workaround */
-static void ohci_quirk_nec_worker(struct work_struct *work)
-{
-	struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
-	int status;
-
-	status = ohci_init(ohci);
-	if (status != 0) {
-		ohci_err(ohci, "Restarting NEC controller failed "
-			 "in ohci_init, %d\n", status);
-		return;
-	}
-
-	status = ohci_restart(ohci);
-	if (status != 0)
-		ohci_err(ohci, "Restarting NEC controller failed "
-			 "in ohci_restart, %d\n", status);
-}
-
-/*-------------------------------------------------------------------------*/
-
 #define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
 
 MODULE_AUTHOR (DRIVER_AUTHOR);
diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c
index 450c7b460c5..2f20d3dc895 100644
--- a/drivers/usb/host/ohci-mem.c
+++ b/drivers/usb/host/ohci-mem.c
@@ -28,7 +28,6 @@ static void ohci_hcd_init (struct ohci_hcd *ohci)
 	ohci->next_statechange = jiffies;
 	spin_lock_init (&ohci->lock);
 	INIT_LIST_HEAD (&ohci->pending);
-	INIT_WORK (&ohci->nec_work, ohci_quirk_nec_worker);
 }
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index a5e2eb85d07..d0360f65ebd 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -84,7 +84,7 @@ static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
 	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
 
 	ohci->flags |= OHCI_QUIRK_ZFMICRO;
-	ohci_dbg (ohci, "enabled Compaq ZFMicro chipset quirk\n");
+	ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
 
 	return 0;
 }
@@ -113,11 +113,31 @@ static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
 
 /* Check for NEC chip and apply quirk for allegedly lost interrupts.
  */
+
+static void ohci_quirk_nec_worker(struct work_struct *work)
+{
+	struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
+	int status;
+
+	status = ohci_init(ohci);
+	if (status != 0) {
+		ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
+			 "ohci_init", status);
+		return;
+	}
+
+	status = ohci_restart(ohci);
+	if (status != 0)
+		ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
+			 "ohci_restart", status);
+}
+
 static int ohci_quirk_nec(struct usb_hcd *hcd)
 {
 	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
 
 	ohci->flags |= OHCI_QUIRK_NEC;
+	INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
 	ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
 
 	return 0;
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 830a3fe8615..547d39be3eb 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -179,6 +179,10 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed)
 	ed->ed_prev = NULL;
 	ed->ed_next = NULL;
 	ed->hwNextED = 0;
+	if (quirk_zfmicro(ohci)
+			&& (ed->type == PIPE_INTERRUPT)
+			&& !(ohci->eds_scheduled++))
+		mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
 	wmb ();
 
 	/* we care about rm_list when setting CLE/BLE in case the HC was at
@@ -940,8 +944,12 @@ skip_ed:
 								TD_MASK;
 
 				/* INTR_WDH may need to clean up first */
-				if (td->td_dma != head)
-					goto skip_ed;
+				if (td->td_dma != head) {
+					if (ed == ohci->ed_to_check)
+						ohci->ed_to_check = NULL;
+					else
+						goto skip_ed;
+				}
 			}
 		}
 
@@ -998,6 +1006,8 @@ rescan_this:
 
 		/* ED's now officially unlinked, hc doesn't see */
 		ed->state = ED_IDLE;
+		if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
+			ohci->eds_scheduled--;
 		ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H);
 		ed->hwNextED = 0;
 		wmb ();
@@ -1021,7 +1031,7 @@ rescan_this:
 
 		if (ohci->ed_controltail) {
 			command |= OHCI_CLF;
-			if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+			if (quirk_zfmicro(ohci))
 				mdelay(1);
 			if (!(ohci->hc_control & OHCI_CTRL_CLE)) {
 				control |= OHCI_CTRL_CLE;
@@ -1031,7 +1041,7 @@ rescan_this:
 		}
 		if (ohci->ed_bulktail) {
 			command |= OHCI_BLF;
-			if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+			if (quirk_zfmicro(ohci))
 				mdelay(1);
 			if (!(ohci->hc_control & OHCI_CTRL_BLE)) {
 				control |= OHCI_CTRL_BLE;
@@ -1043,13 +1053,13 @@ rescan_this:
 		/* CLE/BLE to enable, CLF/BLF to (maybe) kickstart */
 		if (control) {
 			ohci->hc_control |= control;
-			if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+			if (quirk_zfmicro(ohci))
 				mdelay(1);
 			ohci_writel (ohci, ohci->hc_control,
 					&ohci->regs->control);
 		}
 		if (command) {
-			if (ohci->flags & OHCI_QUIRK_ZFMICRO)
+			if (quirk_zfmicro(ohci))
 				mdelay(1);
 			ohci_writel (ohci, command, &ohci->regs->cmdstatus);
 		}
@@ -1061,11 +1071,59 @@ rescan_this:
 /*-------------------------------------------------------------------------*/
 
 /*
+ * Used to take back a TD from the host controller. This would normally be
+ * called from within dl_done_list, however it may be called directly if the
+ * HC no longer sees the TD and it has not appeared on the donelist (after
+ * two frames).  This bug has been observed on ZF Micro systems.
+ */
+static void takeback_td(struct ohci_hcd *ohci, struct td *td)
+{
+	struct urb	*urb = td->urb;
+	urb_priv_t	*urb_priv = urb->hcpriv;
+	struct ed	*ed = td->ed;
+
+	/* update URB's length and status from TD */
+	td_done(ohci, urb, td);
+	urb_priv->td_cnt++;
+
+	/* If all this urb's TDs are done, call complete() */
+	if (urb_priv->td_cnt == urb_priv->length)
+		finish_urb(ohci, urb);
+
+	/* clean schedule:  unlink EDs that are no longer busy */
+	if (list_empty(&ed->td_list)) {
+		if (ed->state == ED_OPER)
+			start_ed_unlink(ohci, ed);
+
+	/* ... reenabling halted EDs only after fault cleanup */
+	} else if ((ed->hwINFO & cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE))
+			== cpu_to_hc32(ohci, ED_SKIP)) {
+		td = list_entry(ed->td_list.next, struct td, td_list);
+		if (!(td->hwINFO & cpu_to_hc32(ohci, TD_DONE))) {
+			ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP);
+			/* ... hc may need waking-up */
+			switch (ed->type) {
+			case PIPE_CONTROL:
+				ohci_writel(ohci, OHCI_CLF,
+						&ohci->regs->cmdstatus);
+				break;
+			case PIPE_BULK:
+				ohci_writel(ohci, OHCI_BLF,
+						&ohci->regs->cmdstatus);
+				break;
+			}
+		}
+	}
+}
+
+/*
  * Process normal completions (error or success) and clean the schedules.
  *
  * This is the main path for handing urbs back to drivers.  The only other
- * path is finish_unlinks(), which unlinks URBs using ed_rm_list, instead of
- * scanning the (re-reversed) donelist as this does.
+ * normal path is finish_unlinks(), which unlinks URBs using ed_rm_list,
+ * instead of scanning the (re-reversed) donelist as this does.  There's
+ * an abnormal path too, handling a quirk in some Compaq silicon:  URBs
+ * with TDs that appear to be orphaned are directly reclaimed.
  */
 static void
 dl_done_list (struct ohci_hcd *ohci)
@@ -1074,44 +1132,7 @@ dl_done_list (struct ohci_hcd *ohci)
 
 	while (td) {
 		struct td	*td_next = td->next_dl_td;
-		struct urb	*urb = td->urb;
-		urb_priv_t	*urb_priv = urb->hcpriv;
-		struct ed	*ed = td->ed;
-
-		/* update URB's length and status from TD */
-		td_done (ohci, urb, td);
-		urb_priv->td_cnt++;
-
-		/* If all this urb's TDs are done, call complete() */
-		if (urb_priv->td_cnt == urb_priv->length)
-			finish_urb (ohci, urb);
-
-		/* clean schedule:  unlink EDs that are no longer busy */
-		if (list_empty (&ed->td_list)) {
-			if (ed->state == ED_OPER)
-				start_ed_unlink (ohci, ed);
-
-		/* ... reenabling halted EDs only after fault cleanup */
-		} else if ((ed->hwINFO & cpu_to_hc32 (ohci,
-						ED_SKIP | ED_DEQUEUE))
-					== cpu_to_hc32 (ohci, ED_SKIP)) {
-			td = list_entry (ed->td_list.next, struct td, td_list);
-			if (!(td->hwINFO & cpu_to_hc32 (ohci, TD_DONE))) {
-				ed->hwINFO &= ~cpu_to_hc32 (ohci, ED_SKIP);
-				/* ... hc may need waking-up */
-				switch (ed->type) {
-				case PIPE_CONTROL:
-					ohci_writel (ohci, OHCI_CLF,
-						&ohci->regs->cmdstatus);
-					break;
-				case PIPE_BULK:
-					ohci_writel (ohci, OHCI_BLF,
-						&ohci->regs->cmdstatus);
-					break;
-				}
-			}
-		}
-
+		takeback_td(ohci, td);
 		td = td_next;
 	}
 }
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 4ada43cf138..dd4d5b4dcb6 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -401,8 +401,34 @@ struct ohci_hcd {
 	// there are also chip quirks/bugs in init logic
 
 	struct work_struct	nec_work;	/* Worker for NEC quirk */
+
+	/* Needed for ZF Micro quirk */
+	struct timer_list	unlink_watchdog;
+	unsigned		eds_scheduled;
+	struct ed		*ed_to_check;
+	unsigned		zf_delay;
 };
 
+#ifdef CONFIG_PCI
+static inline int quirk_nec(struct ohci_hcd *ohci)
+{
+	return ohci->flags & OHCI_QUIRK_NEC;
+}
+static inline int quirk_zfmicro(struct ohci_hcd *ohci)
+{
+	return ohci->flags & OHCI_QUIRK_ZFMICRO;
+}
+#else
+static inline int quirk_nec(struct ohci_hcd *ohci)
+{
+	return 0;
+}
+static inline int quirk_zfmicro(struct ohci_hcd *ohci)
+{
+	return 0;
+}
+#endif
+
 /* convert between an hcd pointer and the corresponding ohci_hcd */
 static inline struct ohci_hcd *hcd_to_ohci (struct usb_hcd *hcd)
 {