Merge tag 'usb-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of USB bugfixes and new device ids for the 3.10-rc5
  tree.

  Nothing major here, a number of new device ids (and movement from the
  option to the zte_ev driver of a number of ids that we had previously
  gotten wrong, some xhci bugfixes, some usb-serial driver fixes that
  were recently found, some host controller fixes / reverts, and a
  variety of smaller other things"

* tag 'usb-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (29 commits)
  USB: option,zte_ev: move most ZTE CDMA devices to zte_ev
  USB: option: blacklist network interface on Huawei E1820
  USB: whiteheat: fix broken port configuration
  USB: serial: fix TIOCMIWAIT return value
  USB: mos7720: fix hardware flow control
  USB: keyspan: remove unused endpoint-array access
  USB: keyspan: fix bogus array index
  USB: zte_ev: fix broken open
  USB: serial: Add Option GTM681W to qcserial device table.
  USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device
  USB: EHCI: fix regression related to qh_refresh()
  usbfs: Increase arbitrary limit for USB 3 isopkt length
  USB: zte_ev: fix control-message timeouts
  USB: mos7720: fix message timeouts
  USB: iuu_phoenix: fix bulk-message timeout
  USB: ark3116: fix control-message timeout
  USB: mos7840: fix DMA to stack
  USB: mos7720: fix DMA to stack
  USB: visor: fix initialisation of Treo/Kyocera devices
  USB: serial: fix Treo/Kyocera interrrupt-in urb context
  ...

24 files changed, 187 insertions, 106 deletions

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index caefc800f29..c88c4fb9459 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1287,9 +1287,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			goto error;
 		}
 		for (totlen = u = 0; u < uurb->number_of_packets; u++) {
-			/* arbitrary limit,
-			 * sufficient for USB 2.0 high-bandwidth iso */
-			if (isopkt[u].length > 8192) {
+			/*
+			 * arbitrary limit need for USB 3.0
+			 * bMaxBurst (0~15 allowed, 1~16 packets)
+			 * bmAttributes (bit 1:0, mult 0~2, 1~3 packets)
+			 * sizemax: 1024 * 16 * 3 = 49152
+			 */
+			if (isopkt[u].length > 49152) {
 				ret = -EINVAL;
 				goto error;
 			}
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index 929e7dd6e58..8ce9d7fd6cf 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -164,9 +164,9 @@ static int dwc3_exynos_remove(struct platform_device *pdev)
 {
 	struct dwc3_exynos	*exynos = platform_get_drvdata(pdev);
 
+	device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child);
 	platform_device_unregister(exynos->usb2_phy);
 	platform_device_unregister(exynos->usb3_phy);
-	device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child);
 
 	clk_disable_unprepare(exynos->clk);
 
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 227d4a7acad..eba9e2baf32 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -196,9 +196,9 @@ static void dwc3_pci_remove(struct pci_dev *pci)
 {
 	struct dwc3_pci	*glue = pci_get_drvdata(pci);
 
+	platform_device_unregister(glue->dwc3);
 	platform_device_unregister(glue->usb2_phy);
 	platform_device_unregister(glue->usb3_phy);
-	platform_device_unregister(glue->dwc3);
 	pci_set_drvdata(pci, NULL);
 	pci_disable_device(pci);
 }
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2b6e7e00120..b5e5b35df49 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1706,11 +1706,19 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
 		dep = dwc->eps[epnum];
 		if (!dep)
 			continue;
-
-		dwc3_free_trb_pool(dep);
-
-		if (epnum != 0 && epnum != 1)
+		/*
+		 * Physical endpoints 0 and 1 are special; they form the
+		 * bi-directional USB endpoint 0.
+		 *
+		 * For those two physical endpoints, we don't allocate a TRB
+		 * pool nor do we add them the endpoints list. Due to that, we
+		 * shouldn't do these two operations otherwise we would end up
+		 * with all sorts of bugs when removing dwc3.ko.
+		 */
+		if (epnum != 0 && epnum != 1) {
+			dwc3_free_trb_pool(dep);
 			list_del(&dep->endpoint.ep_list);
+		}
 
 		kfree(dep);
 	}
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index acff5b8f6e8..f80d0330d54 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -213,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask)
 }
 
 static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 };
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
 
 /* carryover low/fullspeed bandwidth that crosses uframe boundries */
 static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
@@ -646,6 +646,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
 	/* reschedule QH iff another request is queued */
 	if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) {
 		rc = qh_schedule(ehci, qh);
+		if (rc == 0) {
+			qh_refresh(ehci, qh);
+			qh_link_periodic(ehci, qh);
+		}
 
 		/* An error here likely indicates handshake failure
 		 * or no space left in the schedule.  Neither fault
@@ -653,9 +657,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
 		 *
 		 * FIXME kill the now-dysfunctional queued urbs
 		 */
-		if (rc != 0)
+		else {
 			ehci_err(ehci, "can't reschedule qh %p, err %d\n",
 					qh, rc);
+		}
 	}
 
 	/* maybe turn off periodic schedule */
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 2cfc465925b..fbf75e57628 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1827,6 +1827,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
+	if (!xhci->rh_bw)
+		goto no_bw;
+
 	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
 	for (i = 0; i < num_ports; i++) {
 		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
@@ -1845,6 +1848,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 		}
 	}
 
+no_bw:
 	xhci->num_usb2_ports = 0;
 	xhci->num_usb3_ports = 0;
 	xhci->num_active_eps = 0;
@@ -2256,6 +2260,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	u32 page_size, temp;
 	int i;
 
+	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
+	INIT_LIST_HEAD(&xhci->cancel_cmd_list);
+
 	page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
 	xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
 	for (i = 0; i < 16; i++) {
@@ -2334,7 +2341,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
 	if (!xhci->cmd_ring)
 		goto fail;
-	INIT_LIST_HEAD(&xhci->cancel_cmd_list);
 	xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
 	xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
 			(unsigned long long)xhci->cmd_ring->first_seg->dma);
@@ -2445,8 +2451,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	if (xhci_setup_port_arrays(xhci, flags))
 		goto fail;
 
-	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
-
 	/* Enable USB 3.0 device notifications for function remote wake, which
 	 * is necessary for allowing USB 3.0 devices to do remote wakeup from
 	 * U3 (device suspend).
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1a30c380043..cc24e39b97d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -221,6 +221,14 @@ static void xhci_pci_remove(struct pci_dev *dev)
 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+
+	/*
+	 * Systems with the TI redriver that loses port status change events
+	 * need to have the registers polled during D3, so avoid D3cold.
+	 */
+	if (xhci_compliance_mode_recovery_timer_quirk_check())
+		pdev->no_d3cold = true;
 
 	return xhci_suspend(xhci);
 }
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b4aa79d154b..d8f640b12dd 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -466,7 +466,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
  * Systems:
  * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
  */
-static bool compliance_mode_recovery_timer_quirk_check(void)
+bool xhci_compliance_mode_recovery_timer_quirk_check(void)
 {
 	const char *dmi_product_name, *dmi_sys_vendor;
 
@@ -517,7 +517,7 @@ int xhci_init(struct usb_hcd *hcd)
 	xhci_dbg(xhci, "Finished xhci_init\n");
 
 	/* Initializing Compliance Mode Recovery Data If Needed */
-	if (compliance_mode_recovery_timer_quirk_check()) {
+	if (xhci_compliance_mode_recovery_timer_quirk_check()) {
 		xhci->quirks |= XHCI_COMP_MODE_QUIRK;
 		compliance_mode_recovery_timer_init(xhci);
 	}
@@ -956,6 +956,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	struct usb_hcd		*secondary_hcd;
 	int			retval = 0;
+	bool			comp_timer_running = false;
 
 	/* Wait a bit if either of the roothubs need to settle from the
 	 * transition into bus suspend.
@@ -993,6 +994,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 
 	/* If restore operation fails, re-initialize the HC during resume */
 	if ((temp & STS_SRE) || hibernated) {
+
+		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+				!(xhci_all_ports_seen_u0(xhci))) {
+			del_timer_sync(&xhci->comp_mode_recovery_timer);
+			xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n");
+		}
+
 		/* Let the USB core know _both_ roothubs lost power. */
 		usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
 		usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
@@ -1035,6 +1043,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		retval = xhci_init(hcd->primary_hcd);
 		if (retval)
 			return retval;
+		comp_timer_running = true;
+
 		xhci_dbg(xhci, "Start the primary HCD\n");
 		retval = xhci_run(hcd->primary_hcd);
 		if (!retval) {
@@ -1076,7 +1086,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	 * to suffer the Compliance Mode issue again. It doesn't matter if
 	 * ports have entered previously to U0 before system's suspension.
 	 */
-	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
 		compliance_mode_recovery_timer_init(xhci);
 
 	/* Re-enable port polling. */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 29c978e3713..77600cefcaf 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1853,4 +1853,7 @@ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
 struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
 struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
 
+/* xHCI quirks */
+bool xhci_compliance_mode_recovery_timer_quirk_check(void);
+
 #endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 8914dec49f0..9d3044bdebe 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1232,7 +1232,6 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 	void __iomem		*mbase = musb->mregs;
 	struct dma_channel	*dma;
 	bool			transfer_pending = false;
-	static bool use_sg;
 
 	musb_ep_select(mbase, epnum);
 	tx_csr = musb_readw(epio, MUSB_TXCSR);
@@ -1463,9 +1462,9 @@ done:
 	 * NULL.
 	 */
 	if (!urb->transfer_buffer)
-		use_sg = true;
+		qh->use_sg = true;
 
-	if (use_sg) {
+	if (qh->use_sg) {
 		/* sg_miter_start is already done in musb_ep_program */
 		if (!sg_miter_next(&qh->sg_miter)) {
 			dev_err(musb->controller, "error: sg list empty\n");
@@ -1484,9 +1483,9 @@ done:
 
 	qh->segsize = length;
 
-	if (use_sg) {
+	if (qh->use_sg) {
 		if (offset + length >= urb->transfer_buffer_length)
-			use_sg = false;
+			qh->use_sg = false;
 	}
 
 	musb_ep_select(mbase, epnum);
@@ -1552,7 +1551,6 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 	bool			done = false;
 	u32			status;
 	struct dma_channel	*dma;
-	static bool use_sg;
 	unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG;
 
 	musb_ep_select(mbase, epnum);
@@ -1878,12 +1876,12 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 			 * NULL.
 			 */
 			if (!urb->transfer_buffer) {
-				use_sg = true;
+				qh->use_sg = true;
 				sg_miter_start(&qh->sg_miter, urb->sg, 1,
 						sg_flags);
 			}
 
-			if (use_sg) {
+			if (qh->use_sg) {
 				if (!sg_miter_next(&qh->sg_miter)) {
 					dev_err(musb->controller, "error: sg list empty\n");
 					sg_miter_stop(&qh->sg_miter);
@@ -1913,8 +1911,8 @@ finish:
 	urb->actual_length += xfer_len;
 	qh->offset += xfer_len;
 	if (done) {
-		if (use_sg)
-			use_sg = false;
+		if (qh->use_sg)
+			qh->use_sg = false;
 
 		if (urb->status == -EINPROGRESS)
 			urb->status = status;
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 5a9c8feec10..738f7eb60df 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -74,6 +74,7 @@ struct musb_qh {
 	u16			frame;		/* for periodic schedule */
 	unsigned		iso_idx;	/* in urb->iso_frame_desc[] */
 	struct sg_mapping_iter sg_miter;	/* for highmem in PIO mode */
+	bool			use_sg;		/* to track urb using sglist */
 };
 
 /* map from control or bulk queue head to the first qh on that ring */
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 3b16118cbf6..40e7fd94646 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -43,7 +43,7 @@
 #define DRIVER_NAME "ark3116"
 
 /* usb timeout of 1 second */
-#define ARK_TIMEOUT (1*HZ)
+#define ARK_TIMEOUT 1000
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x6547, 0x0232) },
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index d341555d37d..082120198f8 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -65,6 +65,7 @@ static const struct usb_device_id id_table_earthmate[] = {
 static const struct usb_device_id id_table_cyphidcomrs232[] = {
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 	{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+	{ USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
 	{ }						/* Terminating entry */
 };
 
@@ -78,6 +79,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 	{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+	{ USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
 	{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 	{ }						/* Terminating entry */
 };
@@ -229,6 +231,12 @@ static struct usb_serial_driver * const serial_drivers[] = {
  * Cypress serial helper functions
  *****************************************************************************/
 
+/* FRWD Dongle hidcom needs to skip reset and speed checks */
+static inline bool is_frwd(struct usb_device *dev)
+{
+	return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
+		(le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
+}
 
 static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 {
@@ -238,6 +246,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 	if (unstable_bauds)
 		return new_rate;
 
+	/* FRWD Dongle uses 115200 bps */
+	if (is_frwd(port->serial->dev))
+		return new_rate;
+
 	/*
 	 * The general purpose firmware for the Cypress M8 allows for
 	 * a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -448,7 +460,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 	}
 
-	usb_reset_configuration(serial->dev);
+	/* Skip reset for FRWD device. It is a workaound:
+	   device hangs if it receives SET_CONFIGURE in Configured
+	   state. */
+	if (!is_frwd(serial->dev))
+		usb_reset_configuration(serial->dev);
 
 	priv->cmd_ctrl = 0;
 	priv->line_control = 0;
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 67cf6082688..b461311a2ae 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -24,6 +24,10 @@
 #define VENDOR_ID_CYPRESS		0x04b4
 #define PRODUCT_ID_CYPHIDCOM		0x5500
 
+/* FRWD Dongle - a GPS sports watch */
+#define VENDOR_ID_FRWD			0x6737
+#define PRODUCT_ID_CYPHIDCOM_FRWD	0x0001
+
 /* Powercom UPS, chip CY7C63723 */
 #define VENDOR_ID_POWERCOM		0x0d9f
 #define PRODUCT_ID_UPS			0x0002
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 9d74c278b7b..790673e5faa 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -287,7 +287,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
 	    usb_bulk_msg(serial->dev,
 			 usb_sndbulkpipe(serial->dev,
 					 port->bulk_out_endpointAddress), buf,
-			 count, &actual, HZ * 1);
+			 count, &actual, 1000);
 
 	if (status != IUU_OPERATION_OK)
 		dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);
@@ -307,7 +307,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
 	    usb_bulk_msg(serial->dev,
 			 usb_rcvbulkpipe(serial->dev,
 					 port->bulk_in_endpointAddress), buf,
-			 count, &actual, HZ * 1);
+			 count, &actual, 1000);
 
 	if (status != IUU_OPERATION_OK)
 		dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index eb30d7b01f3..3549d073df2 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1548,7 +1548,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 	struct keyspan_serial_private 		*s_priv;
 	struct keyspan_port_private 		*p_priv;
 	const struct keyspan_device_details	*d_details;
-	int 					outcont_urb;
 	struct urb				*this_urb;
 	int 					device_port, err;
 
@@ -1559,7 +1558,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 	d_details = s_priv->device_details;
 	device_port = port->number - port->serial->minor;
 
-	outcont_urb = d_details->outcont_endpoints[port->number];
 	this_urb = p_priv->outcont_urb;
 
 	dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe));
@@ -1685,14 +1683,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 	err = usb_submit_urb(this_urb, GFP_ATOMIC);
 	if (err != 0)
 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
-#if 0
-	else {
-		dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__
-			outcont_urb, this_urb->transfer_buffer_length,
-			usb_pipeendpoint(this_urb->pipe));
-	}
-#endif
-
 	return 0;
 }
 
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index cc0e54345df..f27c621a929 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -40,7 +40,7 @@
 #define DRIVER_DESC "Moschip USB Serial Driver"
 
 /* default urb timeout */
-#define MOS_WDR_TIMEOUT	(HZ * 5)
+#define MOS_WDR_TIMEOUT	5000
 
 #define MOS_MAX_PORT	0x02
 #define MOS_WRITE	0x0E
@@ -227,11 +227,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
 	__u8 requesttype = (__u8)0xc0;
 	__u16 index = get_reg_index(reg);
 	__u16 value = get_reg_value(reg, serial_portnum);
-	int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
-				     index, data, 1, MOS_WDR_TIMEOUT);
-	if (status < 0)
+	u8 *buf;
+	int status;
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+				     index, buf, 1, MOS_WDR_TIMEOUT);
+	if (status == 1)
+		*data = *buf;
+	else if (status < 0)
 		dev_err(&usbdev->dev,
 			"mos7720: usb_control_msg() failed: %d", status);
+	kfree(buf);
+
 	return status;
 }
 
@@ -1618,7 +1629,7 @@ static void change_port_settings(struct tty_struct *tty,
 		mos7720_port->shadowMCR |= (UART_MCR_XONANY);
 		/* To set hardware flow control to the specified *
 		 * serial port, in SP1/2_CONTROL_REG             */
-		if (port->number)
+		if (port_number)
 			write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
 		else
 			write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
@@ -1927,7 +1938,7 @@ static int mos7720_startup(struct usb_serial *serial)
 
 	/* setting configuration feature to one */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
+			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
 
 	/* start the interrupt urb */
 	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
@@ -1970,7 +1981,7 @@ static void mos7720_release(struct usb_serial *serial)
 		/* wait for synchronous usb calls to return */
 		if (mos_parport->msg_pending)
 			wait_for_completion_timeout(&mos_parport->syncmsg_compl,
-						    MOS_WDR_TIMEOUT);
+					    msecs_to_jiffies(MOS_WDR_TIMEOUT));
 
 		parport_remove_port(mos_parport->pp);
 		usb_set_serial_data(serial, NULL);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index a0d5ea54598..7e998081e1c 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2142,13 +2142,21 @@ static int mos7840_ioctl(struct tty_struct *tty,
 static int mos7810_check(struct usb_serial *serial)
 {
 	int i, pass_count = 0;
+	u8 *buf;
 	__u16 data = 0, mcr_data = 0;
 	__u16 test_pattern = 0x55AA;
+	int res;
+
+	buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return 0;	/* failed to identify 7810 */
 
 	/* Store MCR setting */
-	usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+	res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 		MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER,
-		&mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+	if (res == VENDOR_READ_LENGTH)
+		mcr_data = *buf;
 
 	for (i = 0; i < 16; i++) {
 		/* Send the 1-bit test pattern out to MCS7810 test pin */
@@ -2158,9 +2166,12 @@ static int mos7810_check(struct usb_serial *serial)
 			MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
 
 		/* Read the test pattern back */
-		usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-			MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
-			VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		res = usb_control_msg(serial->dev,
+				usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ,
+				MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+				VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		if (res == VENDOR_READ_LENGTH)
+			data = *buf;
 
 		/* If this is a MCS7810 device, both test patterns must match */
 		if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001)
@@ -2174,6 +2185,8 @@ static int mos7810_check(struct usb_serial *serial)
 		MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
 		0, MOS_WDR_TIMEOUT);
 
+	kfree(buf);
+
 	if (pass_count == 16)
 		return 1;
 
@@ -2183,11 +2196,17 @@ static int mos7810_check(struct usb_serial *serial)
 static int mos7840_calc_num_ports(struct usb_serial *serial)
 {
 	__u16 data = 0x00;
+	u8 *buf;
 	int mos7840_num_ports;
 
-	usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-		MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
-		VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+	buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (buf) {
+		usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+			VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		data = *buf;
+		kfree(buf);
+	}
 
 	if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 ||
 		serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) {
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 93d02bc4eb5..bd4323ddae1 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -250,13 +250,7 @@ static void option_instat_callback(struct urb *urb);
 #define ZTE_PRODUCT_MF622			0x0001
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_MF626			0x0031
-#define ZTE_PRODUCT_CDMA_TECH			0xfffe
-#define ZTE_PRODUCT_AC8710			0xfff1
-#define ZTE_PRODUCT_AC2726			0xfff5
-#define ZTE_PRODUCT_AC8710T			0xffff
 #define ZTE_PRODUCT_MC2718			0xffe8
-#define ZTE_PRODUCT_AD3812			0xffeb
-#define ZTE_PRODUCT_MC2716			0xffed
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -495,18 +489,10 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = {
 	.reserved = BIT(4),
 };
 
-static const struct option_blacklist_info zte_ad3812_z_blacklist = {
-	.sendsetup = BIT(0) | BIT(1) | BIT(2),
-};
-
 static const struct option_blacklist_info zte_mc2718_z_blacklist = {
 	.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
 };
 
-static const struct option_blacklist_info zte_mc2716_z_blacklist = {
-	.sendsetup = BIT(1) | BIT(2) | BIT(3),
-};
-
 static const struct option_blacklist_info huawei_cdc12_blacklist = {
 	.reserved = BIT(1) | BIT(2),
 };
@@ -593,6 +579,8 @@ static const struct usb_device_id option_ids[] = {
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff),	/* Huawei E1820 */
+		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
@@ -797,7 +785,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
-	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
@@ -1199,16 +1186,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+	/* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
 	 .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
-	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
-	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 59b32b78212..bd794b43898 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -118,6 +118,7 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x1199, 0x901b)},	/* Sierra Wireless MC7770 */
 	{USB_DEVICE(0x12D1, 0x14F0)},	/* Sony Gobi 3000 QDL */
 	{USB_DEVICE(0x12D1, 0x14F1)},	/* Sony Gobi 3000 Composite */
+	{USB_DEVICE(0x0AF0, 0x8120)},	/* Option GTM681W */
 
 	/* non Gobi Qualcomm serial devices */
 	{USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)},	/* Sierra Wireless MC7700 Device Management */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4753c005cfb..5f6b1ff9d29 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -408,7 +408,7 @@ static int serial_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	int retval = -ENODEV;
+	int retval = -ENOIOCTLCMD;
 
 	dev_dbg(tty->dev, "%s - cmd 0x%.4x\n", __func__, cmd);
 
@@ -420,8 +420,6 @@ static int serial_ioctl(struct tty_struct *tty,
 	default:
 		if (port->serial->type->ioctl)
 			retval = port->serial->type->ioctl(tty, cmd, arg);
-		else
-			retval = -ENOIOCTLCMD;
 	}
 
 	return retval;
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 7573ec8a084..9910aa2edf4 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -560,10 +560,19 @@ static int treo_attach(struct usb_serial *serial)
 	*/
 #define COPY_PORT(dest, src)						\
 	do { \
+		int i;							\
+									\
+		for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) {	\
+			dest->read_urbs[i] = src->read_urbs[i];		\
+			dest->read_urbs[i]->context = dest;		\
+			dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \
+		}							\
 		dest->read_urb = src->read_urb;				\
 		dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\
 		dest->bulk_in_buffer = src->bulk_in_buffer;		\
+		dest->bulk_in_size = src->bulk_in_size;			\
 		dest->interrupt_in_urb = src->interrupt_in_urb;		\
+		dest->interrupt_in_urb->context = dest;			\
 		dest->interrupt_in_endpointAddress = \
 					src->interrupt_in_endpointAddress;\
 		dest->interrupt_in_buffer = src->interrupt_in_buffer;	\
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index b9fca3586d7..347caad47a1 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -649,7 +649,7 @@ static void firm_setup_port(struct tty_struct *tty)
 	struct whiteheat_port_settings port_settings;
 	unsigned int cflag = tty->termios.c_cflag;
 
-	port_settings.port = port->number + 1;
+	port_settings.port = port->number - port->serial->minor + 1;
 
 	/* get the byte size */
 	switch (cflag & CSIZE) {
diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
index 39ee7373b4e..fca4c752a4e 100644
--- a/drivers/usb/serial/zte_ev.c
+++ b/drivers/usb/serial/zte_ev.c
@@ -41,9 +41,6 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	int len;
 	unsigned char *buf;
 
-	if (port->number != 0)
-		return -ENODEV;
-
 	buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -53,7 +50,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x22, 0x21,
 				 0x0001, 0x0000, NULL, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
 	/* send  2st cmd and recieve data */
@@ -65,7 +62,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 0x21, 0xa1,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 3 cmd */
@@ -84,7 +81,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x20, 0x21,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 4 cmd */
@@ -95,7 +92,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x22, 0x21,
 				 0x0003, 0x0000, NULL, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
 	/* send 5 cmd */
@@ -107,7 +104,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 0x21, 0xa1,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 6 cmd */
@@ -126,7 +123,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x20, 0x21,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 	kfree(buf);
 
@@ -166,9 +163,6 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	int len;
 	unsigned char *buf;
 
-	if (port->number != 0)
-		return;
-
 	buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
 	if (!buf)
 		return;
@@ -178,7 +172,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x22, 0x21,
 				 0x0002, 0x0000, NULL, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
 	/* send 2st ctl cmd(CTL    21 22 03 00  00 00 00 00 ) */
@@ -186,7 +180,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x22, 0x21,
 				 0x0003, 0x0000, NULL, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
 	/* send  3st cmd and recieve data */
@@ -198,7 +192,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 0x21, 0xa1,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 4 cmd */
@@ -217,7 +211,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x20, 0x21,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 5 cmd */
@@ -228,7 +222,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x22, 0x21,
 				 0x0003, 0x0000, NULL, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
 	/* send 6 cmd */
@@ -240,7 +234,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 0x21, 0xa1,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 7 cmd */
@@ -259,7 +253,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x20, 0x21,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 8 cmd */
@@ -270,7 +264,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x22, 0x21,
 				 0x0003, 0x0000, NULL, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
 	kfree(buf);
@@ -279,11 +273,29 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 }
 
 static const struct usb_device_id id_table[] = {
-	{ USB_DEVICE(0x19d2, 0xffff) },	/* AC8700 */
-	{ USB_DEVICE(0x19d2, 0xfffe) },
-	{ USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */
+	/* AC8710, AC8710T */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) },
+	 /* AC8700 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) },
+	/* MG880 */
+	{ USB_DEVICE(0x19d2, 0xfffd) },
+	{ USB_DEVICE(0x19d2, 0xfffc) },
+	{ USB_DEVICE(0x19d2, 0xfffb) },
+	/* AC2726, AC8710_V3 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfff1, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(0x19d2, 0xfff6) },
+	{ USB_DEVICE(0x19d2, 0xfff7) },
+	{ USB_DEVICE(0x19d2, 0xfff8) },
+	{ USB_DEVICE(0x19d2, 0xfff9) },
+	{ USB_DEVICE(0x19d2, 0xffee) },
+	/* AC2716, MC2716 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) },
+	/* AD3812 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(0x19d2, 0xffec) },
 	{ USB_DEVICE(0x05C6, 0x3197) },
 	{ USB_DEVICE(0x05C6, 0x6000) },
+	{ USB_DEVICE(0x05C6, 0x9008) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);