Merge commit 'v2.6.27-rc6' into sched/devel

17 files changed, 191 insertions, 103 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ae8494944c4..11c8c19f0fb 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -448,8 +448,10 @@ config PATA_MARVELL
 	tristate "Marvell PATA support via legacy mode"
 	depends on PCI
 	help
-	  This option enables limited support for the Marvell 88SE6145 ATA
-	  controller.
+	  This option enables limited support for the Marvell 88SE61xx ATA
+	  controllers. If you wish to use only the SATA ports then select
+	  the AHCI driver alone. If you wish to the use the PATA port or
+	  both SATA and PATA include this driver.
 
 	  If unsure, say N.
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c729e6988bb..2e1a7cb2ed5 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci_mv */
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
-				 AHCI_HFLAG_MV_PATA),
+				 AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
 		.pio_mask	= 0x1f, /* pio0-4 */
@@ -487,7 +487,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
 	{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
 	{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
 	{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -610,6 +612,15 @@ module_param(ahci_em_messages, int, 0444);
 MODULE_PARM_DESC(ahci_em_messages,
 	"Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
 
+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
+static int marvell_enable;
+#else
+static int marvell_enable = 1;
+#endif
+module_param(marvell_enable, int, 0644);
+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
+
+
 static inline int ahci_nr_ports(u32 cap)
 {
 	return (cap & 0x1f) + 1;
@@ -732,6 +743,8 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 			   "MV_AHCI HACK: port_map %x -> %x\n",
 			   port_map,
 			   port_map & mv);
+		dev_printk(KERN_ERR, &pdev->dev,
+			  "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
 
 		port_map &= mv;
 	}
@@ -2533,6 +2546,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* The AHCI driver can only drive the SATA ports, the PATA driver
+	   can drive them all so if both drivers are selected make sure
+	   AHCI stays out of the way */
+	if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
+		return -ENODEV;
+
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 304fdc6f1dc..2a4c516894f 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1315,11 +1315,6 @@ fsm_start:
 		break;
 
 	case HSM_ST_ERR:
-		/* make sure qc->err_mask is available to
-		 * know what's wrong and recover
-		 */
-		WARN_ON(!(qc->err_mask & (AC_ERR_DEV | AC_ERR_HSM)));
-
 		ap->hsm_task_state = HSM_ST_IDLE;
 
 		/* complete taskfile transaction */
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 24a011b2502..0d87eec8496 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -20,29 +20,30 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_marvell"
-#define DRV_VERSION	"0.1.4"
+#define DRV_VERSION	"0.1.6"
 
 /**
- *	marvell_pre_reset	-	check for 40/80 pin
- *	@link: link
- *	@deadline: deadline jiffies for the operation
+ *	marvell_pata_active	-	check if PATA is active
+ *	@pdev: PCI device
  *
- *	Perform the PATA port setup we need.
+ *	Returns 1 if the PATA port may be active. We know how to check this
+ *	for the 6145 but not the other devices
  */
 
-static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+static int marvell_pata_active(struct pci_dev *pdev)
 {
-	struct ata_port *ap = link->ap;
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int i;
 	u32 devices;
 	void __iomem *barp;
-	int i;
 
-	/* Check if our port is enabled */
+	/* We don't yet know how to do this for other devices */
+	if (pdev->device != 0x6145)
+		return 1;	
 
 	barp = pci_iomap(pdev, 5, 0x10);
 	if (barp == NULL)
 		return -ENOMEM;
+
 	printk("BAR5:");
 	for(i = 0; i <= 0x0F; i++)
 		printk("%02X:%02X ", i, ioread8(barp + i));
@@ -51,9 +52,27 @@ static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
 	devices = ioread32(barp + 0x0C);
 	pci_iounmap(pdev, barp);
 
-	if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
-	    (!(devices & 0x10)))	/* PATA enable ? */
-		return -ENOENT;
+	if (devices & 0x10)
+		return 1;
+	return 0;
+}
+
+/**
+ *	marvell_pre_reset	-	check for 40/80 pin
+ *	@link: link
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Perform the PATA port setup we need.
+ */
+
+static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	if (pdev->device == 0x6145 && ap->port_no == 0 &&
+		!marvell_pata_active(pdev))	/* PATA enable ? */
+			return -ENOENT;
 
 	return ata_sff_prereset(link, deadline);
 }
@@ -128,6 +147,12 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	if (pdev->device == 0x6101)
 		ppi[1] = &ata_dummy_port_info;
 
+#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE)
+	if (!marvell_pata_active(pdev)) {
+		printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n");
+		return -ENODEV;
+	}
+#endif
 	return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
 }
 
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 720b8645f58..e970b227fbc 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -322,9 +322,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 	/* Try to acquire MMIO resources and fallback to PIO if
 	 * that fails
 	 */
-	rc = pcim_enable_device(pdev);
-	if (rc)
-		return rc;
 	rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
 	if (rc)
 		goto use_ioports;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 13c1d2af18a..c815f8ecf6e 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -667,7 +667,8 @@ static const struct pci_device_id mv_pci_tbl[] = {
 	{ PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
 	{ PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
 	{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
-	/* RocketRAID 1740/174x have different identifiers */
+	/* RocketRAID 1720/174x have different identifiers */
+	{ PCI_VDEVICE(TTI, 0x1720), chip_6042 },
 	{ PCI_VDEVICE(TTI, 0x1740), chip_508x },
 	{ PCI_VDEVICE(TTI, 0x1742), chip_508x },
 
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 858f70610ed..1e1f3f3757a 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -309,8 +309,6 @@ static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
-			unsigned long deadline);
 static int nv_adma_slave_config(struct scsi_device *sdev);
 static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
 static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
@@ -407,7 +405,7 @@ static struct scsi_host_template nv_swncq_sht = {
 
 static struct ata_port_operations nv_generic_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.hardreset		= nv_hardreset,
+	.hardreset		= ATA_OP_NULL,
 	.scr_read		= nv_scr_read,
 	.scr_write		= nv_scr_write,
 };
@@ -1588,21 +1586,6 @@ static void nv_mcp55_thaw(struct ata_port *ap)
 	ata_sff_thaw(ap);
 }
 
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
-			unsigned long deadline)
-{
-	int rc;
-
-	/* SATA hardreset fails to retrieve proper device signature on
-	 * some controllers.  Request follow up SRST.  For more info,
-	 * see http://bugzilla.kernel.org/show_bug.cgi?id=3352
-	 */
-	rc = sata_sff_hardreset(link, class, deadline);
-	if (rc)
-		return rc;
-	return -EAGAIN;
-}
-
 static void nv_adma_error_handler(struct ata_port *ap)
 {
 	struct nv_adma_port_priv *pp = ap->private_data;
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 5ca1d80de18..4eee533f3f4 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -21,6 +21,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/delay.h>
 #include <asm/io.h>
 
 /*
@@ -151,13 +152,13 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE,
  */
 static int verify_pmtmr_rate(void)
 {
-	u32 value1, value2;
+	cycle_t value1, value2;
 	unsigned long count, delta;
 
 	mach_prepare_counter();
-	value1 = read_pmtmr();
+	value1 = clocksource_acpi_pm.read();
 	mach_countup(&count);
-	value2 = read_pmtmr();
+	value2 = clocksource_acpi_pm.read();
 	delta = (value2 - value1) & ACPI_PM_MASK;
 
 	/* Check that the PMTMR delta is within 5% of what we expect */
@@ -175,10 +176,13 @@ static int verify_pmtmr_rate(void)
 #define verify_pmtmr_rate() (0)
 #endif
 
+/* Number of monotonicity checks to perform during initialization */
+#define ACPI_PM_MONOTONICITY_CHECKS 10
+
 static int __init init_acpi_pm_clocksource(void)
 {
-	u32 value1, value2;
-	unsigned int i;
+	cycle_t value1, value2;
+	unsigned int i, j, good = 0;
 
 	if (!pmtmr_ioport)
 		return -ENODEV;
@@ -187,24 +191,32 @@ static int __init init_acpi_pm_clocksource(void)
 						clocksource_acpi_pm.shift);
 
 	/* "verify" this timing source: */
-	value1 = read_pmtmr();
-	for (i = 0; i < 10000; i++) {
-		value2 = read_pmtmr();
-		if (value2 == value1)
-			continue;
-		if (value2 > value1)
-			goto pm_good;
-		if ((value2 < value1) && ((value2) < 0xFFF))
-			goto pm_good;
-		printk(KERN_INFO "PM-Timer had inconsistent results:"
-			" 0x%#x, 0x%#x - aborting.\n", value1, value2);
-		return -EINVAL;
+	for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
+		value1 = clocksource_acpi_pm.read();
+		for (i = 0; i < 10000; i++) {
+			value2 = clocksource_acpi_pm.read();
+			if (value2 == value1)
+				continue;
+			if (value2 > value1)
+				good++;
+				break;
+			if ((value2 < value1) && ((value2) < 0xFFF))
+				good++;
+				break;
+			printk(KERN_INFO "PM-Timer had inconsistent results:"
+			       " 0x%#llx, 0x%#llx - aborting.\n",
+			       value1, value2);
+			return -EINVAL;
+		}
+		udelay(300 * i);
+	}
+
+	if (good != ACPI_PM_MONOTONICITY_CHECKS) {
+		printk(KERN_INFO "PM-Timer failed consistency check "
+		       " (0x%#llx) - aborting.\n", value1);
+		return -ENODEV;
 	}
-	printk(KERN_INFO "PM-Timer had no reasonable result:"
-			" 0x%#x - aborting.\n", value1);
-	return -ENODEV;
 
-pm_good:
 	if (verify_pmtmr_rate() != 0)
 		return -ENODEV;
 
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 2ec921bf3c6..18f4d7f6ce6 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -63,7 +63,7 @@
 }
 
 /* table of devices that work with this driver */
-static const struct usb_device_id bcm5974_table [] = {
+static const struct usb_device_id bcm5974_table[] = {
 	/* MacbookAir1.1 */
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO),
@@ -105,7 +105,7 @@ struct tp_header {
 
 /* trackpad finger structure */
 struct tp_finger {
-	__le16 origin;		/* left/right origin? */
+	__le16 origin;		/* zero when switching track finger */
 	__le16 abs_x;		/* absolute x coodinate */
 	__le16 abs_y;		/* absolute y coodinate */
 	__le16 rel_x;		/* relative x coodinate */
@@ -159,6 +159,7 @@ struct bcm5974 {
 	struct bt_data *bt_data;	/* button transferred data */
 	struct urb *tp_urb;		/* trackpad usb request block */
 	struct tp_data *tp_data;	/* trackpad transferred data */
+	int fingers;			/* number of fingers on trackpad */
 };
 
 /* logical dimensions */
@@ -172,6 +173,10 @@ struct bcm5974 {
 #define SN_WIDTH	100		/* width signal-to-noise ratio */
 #define SN_COORD	250		/* coordinate signal-to-noise ratio */
 
+/* pressure thresholds */
+#define PRESSURE_LOW	(2 * DIM_PRESSURE / SN_PRESSURE)
+#define PRESSURE_HIGH	(3 * PRESSURE_LOW)
+
 /* device constants */
 static const struct bcm5974_config bcm5974_config_table[] = {
 	{
@@ -248,6 +253,7 @@ static void setup_events_to_report(struct input_dev *input_dev,
 				0, cfg->y.dim, cfg->y.fuzz, 0);
 
 	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
 	__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
 	__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
 	__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
@@ -273,32 +279,66 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 	const struct tp_finger *f = dev->tp_data->finger;
 	struct input_dev *input = dev->input;
 	const int fingers = (size - 26) / 28;
-	int p = 0, w, x, y, n = 0;
+	int raw_p, raw_w, raw_x, raw_y;
+	int ptest = 0, origin = 0, nmin = 0, nmax = 0;
+	int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
 
 	if (size < 26 || (size - 26) % 28 != 0)
 		return -EIO;
 
+	/* always track the first finger; when detached, start over */
 	if (fingers) {
-		p = raw2int(f->force_major);
-		w = raw2int(f->size_major);
-		x = raw2int(f->abs_x);
-		y = raw2int(f->abs_y);
-		n = p > 0 ? fingers : 0;
+		raw_p = raw2int(f->force_major);
+		raw_w = raw2int(f->size_major);
+		raw_x = raw2int(f->abs_x);
+		raw_y = raw2int(f->abs_y);
 
 		dprintk(9,
-			"bcm5974: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
-			p, w, x, y, n);
+			"bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n",
+			raw_p, raw_w, raw_x, raw_y);
+
+		ptest = int2bound(&c->p, raw_p);
+		origin = raw2int(f->origin);
+	}
 
-		input_report_abs(input, ABS_TOOL_WIDTH, int2bound(&c->w, w));
-		input_report_abs(input, ABS_X, int2bound(&c->x, x - c->x.devmin));
-		input_report_abs(input, ABS_Y, int2bound(&c->y, c->y.devmax - y));
+	/* while tracking finger still valid, count all fingers */
+	if (ptest > PRESSURE_LOW && origin) {
+		abs_p = ptest;
+		abs_w = int2bound(&c->w, raw_w);
+		abs_x = int2bound(&c->x, raw_x - c->x.devmin);
+		abs_y = int2bound(&c->y, c->y.devmax - raw_y);
+		for (; f != dev->tp_data->finger + fingers; f++) {
+			ptest = int2bound(&c->p, raw2int(f->force_major));
+			if (ptest > PRESSURE_LOW)
+				nmax++;
+			if (ptest > PRESSURE_HIGH)
+				nmin++;
+		}
 	}
 
-	input_report_abs(input, ABS_PRESSURE, int2bound(&c->p, p));
+	if (dev->fingers < nmin)
+		dev->fingers = nmin;
+	if (dev->fingers > nmax)
+		dev->fingers = nmax;
+
+	input_report_key(input, BTN_TOUCH, dev->fingers > 0);
+	input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1);
+	input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2);
+	input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2);
 
-	input_report_key(input, BTN_TOOL_FINGER, n == 1);
-	input_report_key(input, BTN_TOOL_DOUBLETAP, n == 2);
-	input_report_key(input, BTN_TOOL_TRIPLETAP, n > 2);
+	input_report_abs(input, ABS_PRESSURE, abs_p);
+	input_report_abs(input, ABS_TOOL_WIDTH, abs_w);
+
+	if (abs_p) {
+		input_report_abs(input, ABS_X, abs_x);
+		input_report_abs(input, ABS_Y, abs_y);
+
+		dprintk(8,
+			"bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d "
+			"nmin: %d nmax: %d n: %d\n",
+			abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers);
+
+	}
 
 	input_sync(input);
 
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 3282b741e24..5aafe24984c 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -305,7 +305,7 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 		.ident = "Lenovo 3000 n100",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "076804U"),
 		},
 	},
 	{
diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index db00b059173..f1216cf6fa8 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -423,7 +423,7 @@ int chp_new(struct chp_id chpid)
 	ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group);
 	if (ret) {
 		device_unregister(&chp->dev);
-		goto out_free;
+		goto out;
 	}
 	mutex_lock(&channel_subsystems[chpid.cssid]->mutex);
 	if (channel_subsystems[chpid.cssid]->cm_enabled) {
@@ -432,14 +432,15 @@ int chp_new(struct chp_id chpid)
 			sysfs_remove_group(&chp->dev.kobj, &chp_attr_group);
 			device_unregister(&chp->dev);
 			mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
-			goto out_free;
+			goto out;
 		}
 	}
 	channel_subsystems[chpid.cssid]->chps[chpid.id] = chp;
 	mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
-	return ret;
+	goto out;
 out_free:
 	kfree(chp);
+out:
 	return ret;
 }
 
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 33bff8fec7d..5954b905e3c 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -208,8 +208,10 @@ cio_start_key (struct subchannel *sch,	/* subchannel structure */
 	case 1:		/* status pending */
 	case 2:		/* busy */
 		return -EBUSY;
-	default:		/* device/path not operational */
+	case 3:		/* device/path not operational */
 		return cio_start_handle_notoper(sch, lpm);
+	default:
+		return ccode;
 	}
 }
 
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 51489eff6b0..1261e1a9e8c 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -633,6 +633,11 @@ channel_subsystem_release(struct device *dev)
 
 	css = to_css(dev);
 	mutex_destroy(&css->mutex);
+	if (css->pseudo_subchannel) {
+		/* Implies that it has been generated but never registered. */
+		css_subchannel_release(&css->pseudo_subchannel->dev);
+		css->pseudo_subchannel = NULL;
+	}
 	kfree(css);
 }
 
@@ -785,11 +790,15 @@ init_channel_subsystem (void)
 		}
 		channel_subsystems[i] = css;
 		ret = setup_css(i);
-		if (ret)
-			goto out_free;
+		if (ret) {
+			kfree(channel_subsystems[i]);
+			goto out_unregister;
+		}
 		ret = device_register(&css->device);
-		if (ret)
-			goto out_free_all;
+		if (ret) {
+			put_device(&css->device);
+			goto out_unregister;
+		}
 		if (css_chsc_characteristics.secm) {
 			ret = device_create_file(&css->device,
 						 &dev_attr_cm_enable);
@@ -802,7 +811,7 @@ init_channel_subsystem (void)
 	}
 	ret = register_reboot_notifier(&css_reboot_notifier);
 	if (ret)
-		goto out_pseudo;
+		goto out_unregister;
 	css_init_done = 1;
 
 	/* Enable default isc for I/O subchannels. */
@@ -810,18 +819,12 @@ init_channel_subsystem (void)
 
 	for_each_subchannel(__init_channel_subsystem, NULL);
 	return 0;
-out_pseudo:
-	device_unregister(&channel_subsystems[i]->pseudo_subchannel->dev);
 out_file:
-	device_remove_file(&channel_subsystems[i]->device,
-			   &dev_attr_cm_enable);
+	if (css_chsc_characteristics.secm)
+		device_remove_file(&channel_subsystems[i]->device,
+				   &dev_attr_cm_enable);
 out_device:
 	device_unregister(&channel_subsystems[i]->device);
-out_free_all:
-	kfree(channel_subsystems[i]->pseudo_subchannel->lock);
-	kfree(channel_subsystems[i]->pseudo_subchannel);
-out_free:
-	kfree(channel_subsystems[i]);
 out_unregister:
 	while (i > 0) {
 		struct channel_subsystem *css;
@@ -829,6 +832,7 @@ out_unregister:
 		i--;
 		css = channel_subsystems[i];
 		device_unregister(&css->pseudo_subchannel->dev);
+		css->pseudo_subchannel = NULL;
 		if (css_chsc_characteristics.secm)
 			device_remove_file(&css->device,
 					   &dev_attr_cm_enable);
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 550508df952..84cc9ea346d 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -658,6 +658,13 @@ ccw_device_offline(struct ccw_device *cdev)
 {
 	struct subchannel *sch;
 
+	/* Allow ccw_device_offline while disconnected. */
+	if (cdev->private->state == DEV_STATE_DISCONNECTED ||
+	    cdev->private->state == DEV_STATE_NOT_OPER) {
+		cdev->private->flags.donotify = 0;
+		ccw_device_done(cdev, DEV_STATE_NOT_OPER);
+		return 0;
+	}
 	if (ccw_device_is_orphan(cdev)) {
 		ccw_device_done(cdev, DEV_STATE_OFFLINE);
 		return 0;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 1eb64d08b60..95b3ec89c12 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -208,7 +208,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 	if (cpu_is_omap16xx())
 		ocpi_enable();
 
-#ifdef	CONFIG_ARCH_OMAP_OTG
+#ifdef	CONFIG_USB_OTG
 	if (need_transceiver) {
 		ohci->transceiver = otg_get_transceiver();
 		if (ohci->transceiver) {
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 7b74238ad1c..e980766bb84 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -161,7 +161,7 @@ static int usb_console_setup(struct console *co, char *options)
 		if (serial->type->set_termios) {
 			termios->c_cflag = cflag;
 			tty_termios_encode_baud_rate(termios, baud, baud);
-			serial->type->set_termios(NULL, port, &dummy);
+			serial->type->set_termios(tty, port, &dummy);
 
 			port->port.tty = NULL;
 			kfree(termios);
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index d4427cb8697..2e15da5459c 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -60,7 +60,7 @@
 
 #define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10))
 
-#define BALLOON_CLASS_NAME "memory"
+#define BALLOON_CLASS_NAME "xen_memory"
 
 struct balloon_stats {
 	/* We aim for 'current allocation' == 'target allocation'. */