Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

10 files changed, 38 insertions, 12 deletions

diff --git a/drivers/Kconfig b/drivers/Kconfig
index aed4a9b97c1..34efb2150e6 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -28,7 +28,7 @@ source "drivers/message/i2o/Kconfig"
 
 source "drivers/macintosh/Kconfig"
 
-source "net/Kconfig"
+source "drivers/net/Kconfig"
 
 source "drivers/isdn/Kconfig"
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2b55687f6ee..9a07ff7a777 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -3,6 +3,8 @@
 # Network device configuration
 #
 
+menu "Network device support"
+
 config NETDEVICES
 	depends on NET
 	bool "Network device support"
@@ -2547,3 +2549,4 @@ config NETCONSOLE
 	If you want to log kernel messages over the network, enable this.
 	See <file:Documentation/networking/netconsole.txt> for details.
 
+endmenu
diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
index 69c488d933a..b14e89004c3 100644
--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
@@ -1,6 +1,33 @@
 #
 # Appletalk driver configuration
 #
+config ATALK
+	tristate "Appletalk protocol support"
+	select LLC
+	---help---
+	  AppleTalk is the protocol that Apple computers can use to communicate
+	  on a network.  If your Linux box is connected to such a network and you
+	  wish to connect to it, say Y.  You will need to use the netatalk package
+	  so that your Linux box can act as a print and file server for Macs as
+	  well as access AppleTalk printers.  Check out
+	  <http://www.zettabyte.net/netatalk/> on the WWW for details.
+	  EtherTalk is the name used for AppleTalk over Ethernet and the
+	  cheaper and slower LocalTalk is AppleTalk over a proprietary Apple
+	  network using serial links.  EtherTalk and LocalTalk are fully
+	  supported by Linux.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.  The
+	  NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, contains valuable
+	  information as well.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called appletalk. You almost certainly want to compile it as a
+	  module so you can restart your AppleTalk stack without rebooting
+	  your machine. I hear that the GNU boycott of Apple is over, so
+	  even politically correct people are allowed to say Y here.
+
 config DEV_APPLETALK
 	bool "Appletalk interfaces support"
 	depends on ATALK
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index aad5494c83c..f0996ce5c26 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -369,7 +369,7 @@ static void myri_tx(struct myri_eth *mp, struct net_device *dev)
  * assume 802.3 if the type field is short enough to be a length.
  * This is normal practice and works for any 'now in use' protocol.
  */
-static unsigned short myri_type_trans(struct sk_buff *skb, struct net_device *dev)
+static __be16 myri_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ethhdr *eth;
 	unsigned char *rawp;
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index f4b62405d2e..21537ee3a6a 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -540,7 +540,7 @@ plip_receive(unsigned short nibble_timeout, struct net_device *dev,
  *	in far too many old systems not all even running Linux.
  */
  
-static unsigned short plip_type_trans(struct sk_buff *skb, struct net_device *dev)
+static __be16 plip_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ethhdr *eth;
 	unsigned char *rawp;
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 7217d44e885..2c83cca34b8 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -861,8 +861,7 @@ fst_tx_dma_complete(struct fst_card_info *card, struct fst_port_info *port,
 /*
  * Mark it for our own raw sockets interface
  */
-static unsigned short farsync_type_trans(struct sk_buff *skb,
-					 struct net_device *dev)
+static __be16 farsync_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	skb->dev = dev;
 	skb->mac.raw = skb->data;
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index 87496843681..48c03c11cd9 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -91,8 +91,7 @@ static void cisco_keepalive_send(struct net_device *dev, u32 type,
 
 
 
-static unsigned short cisco_type_trans(struct sk_buff *skb,
-				       struct net_device *dev)
+static __be16 cisco_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	hdlc_header *data = (hdlc_header*)skb->data;
 
diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c
index 7cd6195a2e4..b81263eaede 100644
--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -66,8 +66,7 @@ static void ppp_close(struct net_device *dev)
 
 
 
-static unsigned short ppp_type_trans(struct sk_buff *skb,
-				     struct net_device *dev)
+static __be16 ppp_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	return __constant_htons(ETH_P_WAN_PPP);
 }
diff --git a/drivers/net/wan/hdlc_raw.c b/drivers/net/wan/hdlc_raw.c
index c41fb70b692..9456d31cb1c 100644
--- a/drivers/net/wan/hdlc_raw.c
+++ b/drivers/net/wan/hdlc_raw.c
@@ -24,8 +24,7 @@
 #include <linux/hdlc.h>
 
 
-static unsigned short raw_type_trans(struct sk_buff *skb,
-				     struct net_device *dev)
+static __be16 raw_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	return __constant_htons(ETH_P_IP);
 }
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index 3cb88c77003..8f4d2999af8 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -2210,7 +2210,7 @@ no_mem:
 	return NULL;
 }
 
-static inline unsigned short
+static inline __be16
 qeth_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	struct qeth_card *card;