netdev: Merge UCC and gianfar MDIO bus drivers

The MDIO bus drivers for the UCC and gianfar ethernet controllers are
essentially the same.  There's no reason to duplicate that much code.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 files changed, 549 insertions, 490 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 49f4d50abc5..62bc0223a8e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2272,9 +2272,17 @@ config GELIC_WIRELESS_OLD_PSK_INTERFACE
 
           If unsure, say N.
 
+config FSL_PQ_MDIO
+	tristate "Freescale PQ MDIO"
+	depends on FSL_SOC
+	select PHYLIB
+	help
+	  This driver supports the MDIO bus used by the gianfar and UCC drivers.
+
 config GIANFAR
 	tristate "Gianfar Ethernet"
 	depends on FSL_SOC
+	select FSL_PQ_MDIO
 	select PHYLIB
 	select CRC32
 	help
@@ -2284,6 +2292,7 @@ config GIANFAR
 config UCC_GETH
 	tristate "Freescale QE Gigabit Ethernet"
 	depends on QUICC_ENGINE
+	select FSL_PQ_MDIO
 	select PHYLIB
 	help
 	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index a3c5c002f22..ad87ba72cf1 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -24,11 +24,12 @@ obj-$(CONFIG_JME) += jme.o
 
 gianfar_driver-objs := gianfar.o \
 		gianfar_ethtool.o \
-		gianfar_mii.o \
 		gianfar_sysfs.o
 
 obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
-ucc_geth_driver-objs := ucc_geth.o ucc_geth_mii.o ucc_geth_ethtool.o
+ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o
+
+obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o
 
 #
 # link order important here
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
new file mode 100644
index 00000000000..c434a156d7a
--- /dev/null
+++ b/drivers/net/fsl_pq_mdio.c
@@ -0,0 +1,463 @@
+/*
+ * Freescale PowerQUICC Ethernet Driver -- MIIM bus implementation
+ * Provides Bus interface for MIIM regs
+ *
+ * Author: Andy Fleming <afleming@freescale.com>
+ *
+ * Copyright (c) 2002-2004,2008 Freescale Semiconductor, Inc.
+ *
+ * Based on gianfar_mii.c and ucc_geth_mii.c (Li Yang, Kim Phillips)
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/ucc.h>
+
+#include "gianfar.h"
+#include "fsl_pq_mdio.h"
+
+/*
+ * Write value to the PHY at mii_id at register regnum,
+ * on the bus attached to the local interface, which may be different from the
+ * generic mdio bus (tied to a single interface), waiting until the write is
+ * done before returning. This is helpful in programming interfaces like
+ * the TBI which control interfaces like onchip SERDES and are always tied to
+ * the local mdio pins, which may not be the same as system mdio bus, used for
+ * controlling the external PHYs, for example.
+ */
+int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id,
+		int regnum, u16 value)
+{
+	/* Set the PHY address and the register address we want to write */
+	out_be32(&regs->miimadd, (mii_id << 8) | regnum);
+
+	/* Write out the value we want */
+	out_be32(&regs->miimcon, value);
+
+	/* Wait for the transaction to finish */
+	while (in_be32(&regs->miimind) & MIIMIND_BUSY)
+		cpu_relax();
+
+	return 0;
+}
+
+/*
+ * Read the bus for PHY at addr mii_id, register regnum, and
+ * return the value.  Clears miimcom first.  All PHY operation
+ * done on the bus attached to the local interface,
+ * which may be different from the generic mdio bus
+ * This is helpful in programming interfaces like
+ * the TBI which, in turn, control interfaces like onchip SERDES
+ * and are always tied to the local mdio pins, which may not be the
+ * same as system mdio bus, used for controlling the external PHYs, for eg.
+ */
+int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs,
+		int mii_id, int regnum)
+{
+	u16 value;
+
+	/* Set the PHY address and the register address we want to read */
+	out_be32(&regs->miimadd, (mii_id << 8) | regnum);
+
+	/* Clear miimcom, and then initiate a read */
+	out_be32(&regs->miimcom, 0);
+	out_be32(&regs->miimcom, MII_READ_COMMAND);
+
+	/* Wait for the transaction to finish */
+	while (in_be32(&regs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
+		cpu_relax();
+
+	/* Grab the value of the register from miimstat */
+	value = in_be32(&regs->miimstat);
+
+	return value;
+}
+
+/*
+ * Write value to the PHY at mii_id at register regnum,
+ * on the bus, waiting until the write is done before returning.
+ */
+int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
+{
+	struct fsl_pq_mdio __iomem *regs = (void __iomem *)bus->priv;
+
+	/* Write to the local MII regs */
+	return(fsl_pq_local_mdio_write(regs, mii_id, regnum, value));
+}
+
+/*
+ * Read the bus for PHY at addr mii_id, register regnum, and
+ * return the value.  Clears miimcom first.
+ */
+int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+	struct fsl_pq_mdio __iomem *regs = (void __iomem *)bus->priv;
+
+	/* Read the local MII regs */
+	return(fsl_pq_local_mdio_read(regs, mii_id, regnum));
+}
+
+/* Reset the MIIM registers, and wait for the bus to free */
+static int fsl_pq_mdio_reset(struct mii_bus *bus)
+{
+	struct fsl_pq_mdio __iomem *regs = (void __iomem *)bus->priv;
+	unsigned int timeout = PHY_INIT_TIMEOUT;
+
+	mutex_lock(&bus->mdio_lock);
+
+	/* Reset the management interface */
+	out_be32(&regs->miimcfg, MIIMCFG_RESET);
+
+	/* Setup the MII Mgmt clock speed */
+	out_be32(&regs->miimcfg, MIIMCFG_INIT_VALUE);
+
+	/* Wait until the bus is free */
+	while ((in_be32(&regs->miimind) & MIIMIND_BUSY) && timeout--)
+		cpu_relax();
+
+	mutex_unlock(&bus->mdio_lock);
+
+	if(timeout == 0) {
+		printk(KERN_ERR "%s: The MII Bus is stuck!\n",
+				bus->name);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+/* Allocate an array which provides irq #s for each PHY on the given bus */
+static int *create_irq_map(struct device_node *np)
+{
+	int *irqs;
+	int i;
+	struct device_node *child = NULL;
+
+	irqs = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
+
+	if (!irqs)
+		return NULL;
+
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		irqs[i] = PHY_POLL;
+
+	while ((child = of_get_next_child(np, child)) != NULL) {
+		int irq = irq_of_parse_and_map(child, 0);
+		const u32 *id;
+
+		if (irq == NO_IRQ)
+			continue;
+
+		id = of_get_property(child, "reg", NULL);
+
+		if (!id)
+			continue;
+
+		if (*id < PHY_MAX_ADDR && *id >= 0)
+			irqs[*id] = irq;
+		else
+			printk(KERN_WARNING "%s: "
+					"%d is not a valid PHY address\n",
+					np->full_name, *id);
+	}
+
+	return irqs;
+}
+
+void fsl_pq_mdio_bus_name(char *name, struct device_node *np)
+{
+	const u32 *reg;
+
+	reg = of_get_property(np, "reg", NULL);
+
+	snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0);
+}
+
+/* Scan the bus in reverse, looking for an empty spot */
+static int fsl_pq_mdio_find_free(struct mii_bus *new_bus)
+{
+	int i;
+
+	for (i = PHY_MAX_ADDR; i > 0; i--) {
+		u32 phy_id;
+
+		if (get_phy_id(new_bus, i, &phy_id))
+			return -1;
+
+		if (phy_id == 0xffffffff)
+			break;
+	}
+
+	return i;
+}
+
+
+#ifdef CONFIG_GIANFAR
+static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs)
+{
+	struct gfar __iomem *enet_regs;
+
+	/*
+	 * This is mildly evil, but so is our hardware for doing this.
+	 * Also, we have to cast back to struct gfar because of
+	 * definition weirdness done in gianfar.h.
+	 */
+	enet_regs = (struct gfar __iomem *)
+		((char __iomem *)regs - offsetof(struct gfar, gfar_mii_regs));
+
+	return &enet_regs->tbipa;
+}
+#endif
+
+
+#ifdef CONFIG_UCC_GETH
+static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
+{
+	struct device_node *np = NULL;
+	int err = 0;
+
+	for_each_compatible_node(np, NULL, "ucc_geth") {
+		struct resource tempres;
+
+		err = of_address_to_resource(np, 0, &tempres);
+		if (err)
+			continue;
+
+		/* if our mdio regs fall within this UCC regs range */
+		if ((start >= tempres.start) && (end <= tempres.end)) {
+			/* Find the id of the UCC */
+			const u32 *id;
+
+			id = of_get_property(np, "cell-index", NULL);
+			if (!id) {
+				id = of_get_property(np, "device-id", NULL);
+				if (!id)
+					continue;
+			}
+
+			*ucc_id = *id;
+
+			return 0;
+		}
+	}
+
+	if (err)
+		return err;
+	else
+		return -EINVAL;
+}
+#endif
+
+
+static int fsl_pq_mdio_probe(struct of_device *ofdev,
+		const struct of_device_id *match)
+{
+	struct device_node *np = ofdev->node;
+	struct device_node *tbi;
+	struct fsl_pq_mdio __iomem *regs;
+	u32 __iomem *tbipa;
+	struct mii_bus *new_bus;
+	int tbiaddr = -1;
+	u64 addr, size;
+	int err = 0;
+
+	new_bus = mdiobus_alloc();
+	if (NULL == new_bus)
+		return -ENOMEM;
+
+	new_bus->name = "Freescale PowerQUICC MII Bus",
+	new_bus->read = &fsl_pq_mdio_read,
+	new_bus->write = &fsl_pq_mdio_write,
+	new_bus->reset = &fsl_pq_mdio_reset,
+	fsl_pq_mdio_bus_name(new_bus->id, np);
+
+	/* Set the PHY base address */
+	addr = of_translate_address(np, of_get_address(np, 0, &size, NULL));
+	regs = ioremap(addr, size);
+
+	if (NULL == regs) {
+		err = -ENOMEM;
+		goto err_free_bus;
+	}
+
+	new_bus->priv = (void __force *)regs;
+
+	new_bus->irq = create_irq_map(np);
+
+	if (NULL == new_bus->irq) {
+		err = -ENOMEM;
+		goto err_unmap_regs;
+	}
+
+	new_bus->parent = &ofdev->dev;
+	dev_set_drvdata(&ofdev->dev, new_bus);
+
+	if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
+			of_device_is_compatible(np, "gianfar")) {
+#ifdef CONFIG_GIANFAR
+		tbipa = get_gfar_tbipa(regs);
+#else
+		err = -ENODEV;
+		goto err_free_irqs;
+#endif
+	} else if (of_device_is_compatible(np, "fsl,ucc-mdio") ||
+			of_device_is_compatible(np, "ucc_geth_phy")) {
+#ifdef CONFIG_UCC_GETH
+		u32 id;
+
+		tbipa = &regs->utbipar;
+
+		if ((err = get_ucc_id_for_range(addr, addr + size, &id)))
+			goto err_free_irqs;
+
+		ucc_set_qe_mux_mii_mng(id - 1);
+#else
+		err = -ENODEV;
+		goto err_free_irqs;
+#endif
+	} else {
+		err = -ENODEV;
+		goto err_free_irqs;
+	}
+
+	for_each_child_of_node(np, tbi) {
+		if (!strncmp(tbi->type, "tbi-phy", 8))
+			break;
+	}
+
+	if (tbi) {
+		const u32 *prop = of_get_property(tbi, "reg", NULL);
+
+		if (prop)
+			tbiaddr = *prop;
+	}
+
+	if (tbiaddr == -1) {
+		out_be32(tbipa, 0);
+
+		tbiaddr = fsl_pq_mdio_find_free(new_bus);
+	}
+
+	/*
+	 * We define TBIPA at 0 to be illegal, opting to fail for boards that
+	 * have PHYs at 1-31, rather than change tbipa and rescan.
+	 */
+	if (tbiaddr == 0) {
+		err = -EBUSY;
+
+		goto err_free_irqs;
+	}
+
+	out_be32(tbipa, tbiaddr);
+
+	/*
+	 * The TBIPHY-only buses will find PHYs at every address,
+	 * so we mask them all but the TBI
+	 */
+	if (!of_device_is_compatible(np, "fsl,gianfar-mdio"))
+		new_bus->phy_mask = ~(1 << tbiaddr);
+
+	err = mdiobus_register(new_bus);
+
+	if (err) {
+		printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
+				new_bus->name);
+		goto err_free_irqs;
+	}
+
+	return 0;
+
+err_free_irqs:
+	kfree(new_bus->irq);
+err_unmap_regs:
+	iounmap(regs);
+err_free_bus:
+	kfree(new_bus);
+
+	return err;
+}
+
+
+static int fsl_pq_mdio_remove(struct of_device *ofdev)
+{
+	struct device *device = &ofdev->dev;
+	struct mii_bus *bus = dev_get_drvdata(device);
+
+	mdiobus_unregister(bus);
+
+	dev_set_drvdata(device, NULL);
+
+	iounmap((void __iomem *)bus->priv);
+	bus->priv = NULL;
+	mdiobus_free(bus);
+
+	return 0;
+}
+
+static struct of_device_id fsl_pq_mdio_match[] = {
+	{
+		.type = "mdio",
+		.compatible = "ucc_geth_phy",
+	},
+	{
+		.type = "mdio",
+		.compatible = "gianfar",
+	},
+	{
+		.compatible = "fsl,ucc-mdio",
+	},
+	{
+		.compatible = "fsl,gianfar-tbi",
+	},
+	{
+		.compatible = "fsl,gianfar-mdio",
+	},
+	{},
+};
+
+static struct of_platform_driver fsl_pq_mdio_driver = {
+	.name = "fsl-pq_mdio",
+	.probe = fsl_pq_mdio_probe,
+	.remove = fsl_pq_mdio_remove,
+	.match_table = fsl_pq_mdio_match,
+};
+
+int __init fsl_pq_mdio_init(void)
+{
+	return of_register_platform_driver(&fsl_pq_mdio_driver);
+}
+
+void fsl_pq_mdio_exit(void)
+{
+	of_unregister_platform_driver(&fsl_pq_mdio_driver);
+}
+subsys_initcall_sync(fsl_pq_mdio_init);
+module_exit(fsl_pq_mdio_exit);
diff --git a/drivers/net/fsl_pq_mdio.h b/drivers/net/fsl_pq_mdio.h
new file mode 100644
index 00000000000..36dad527410
--- /dev/null
+++ b/drivers/net/fsl_pq_mdio.h
@@ -0,0 +1,45 @@
+/*
+ * Freescale PowerQUICC MDIO Driver -- MII Management Bus Implementation
+ * Driver for the MDIO bus controller on Freescale PowerQUICC processors
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2002-2004,2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __FSL_PQ_MDIO_H
+#define __FSL_PQ_MDIO_H
+
+#define MIIMIND_BUSY            0x00000001
+#define MIIMIND_NOTVALID        0x00000004
+#define MIIMCFG_INIT_VALUE	0x00000007
+#define MIIMCFG_RESET           0x80000000
+
+#define MII_READ_COMMAND       0x00000001
+
+struct fsl_pq_mdio {
+	u32 miimcfg;		/* MII management configuration reg */
+	u32 miimcom;		/* MII management command reg */
+	u32 miimadd;		/* MII management address reg */
+	u32 miimcon;		/* MII management control reg */
+	u32 miimstat;		/* MII management status reg */
+	u32 miimind;		/* MII management indication reg */
+	u8 reserved[28];	/* Space holder */
+	u32 utbipar;		/* TBI phy address reg (only on UCC) */
+} __attribute__ ((packed));
+
+
+int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
+int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
+int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id,
+			  int regnum, u16 value);
+int fsl_pq_local_mdio_read(struct fsl_pq_mdio __iomem *regs, int mii_id, int regnum);
+int __init fsl_pq_mdio_init(void);
+void fsl_pq_mdio_exit(void);
+void fsl_pq_mdio_bus_name(char *name, struct device_node *np);
+#endif /* FSL_PQ_MDIO_H */
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index eb8302c5ba8..bd21b6d5f13 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -93,7 +93,7 @@
 #include <linux/of.h>
 
 #include "gianfar.h"
-#include "gianfar_mii.h"
+#include "fsl_pq_mdio.h"
 
 #define TX_TIMEOUT      (1*HZ)
 #undef BRIEF_GFAR_ERRORS
@@ -253,7 +253,7 @@ static int gfar_of_init(struct net_device *dev)
 		of_node_put(phy);
 		of_node_put(mdio);
 
-		gfar_mdio_bus_name(bus_name, mdio);
+		fsl_pq_mdio_bus_name(bus_name, mdio);
 		snprintf(priv->phy_bus_id, sizeof(priv->phy_bus_id), "%s:%02x",
 				bus_name, *id);
 	}
@@ -420,7 +420,7 @@ static int gfar_probe(struct of_device *ofdev,
 		priv->hash_width = 8;
 
 		priv->hash_regs[0] = &priv->regs->gaddr0;
-                priv->hash_regs[1] = &priv->regs->gaddr1;
+		priv->hash_regs[1] = &priv->regs->gaddr1;
 		priv->hash_regs[2] = &priv->regs->gaddr2;
 		priv->hash_regs[3] = &priv->regs->gaddr3;
 		priv->hash_regs[4] = &priv->regs->gaddr4;
@@ -836,7 +836,7 @@ void stop_gfar(struct net_device *dev)
 		free_irq(priv->interruptTransmit, dev);
 		free_irq(priv->interruptReceive, dev);
 	} else {
- 		free_irq(priv->interruptTransmit, dev);
+		free_irq(priv->interruptTransmit, dev);
 	}
 
 	free_skb_resources(priv);
@@ -1829,6 +1829,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
 				skb_put(skb, pkt_len);
 				dev->stats.rx_bytes += pkt_len;
 
+				if (in_irq() || irqs_disabled())
+					printk("Interrupt problem!\n");
 				gfar_process_frame(dev, skb, amount_pull);
 
 			} else {
@@ -2302,23 +2304,12 @@ static struct of_platform_driver gfar_driver = {
 
 static int __init gfar_init(void)
 {
-	int err = gfar_mdio_init();
-
-	if (err)
-		return err;
-
-	err = of_register_platform_driver(&gfar_driver);
-
-	if (err)
-		gfar_mdio_exit();
-
-	return err;
+	return of_register_platform_driver(&gfar_driver);
 }
 
 static void __exit gfar_exit(void)
 {
 	of_unregister_platform_driver(&gfar_driver);
-	gfar_mdio_exit();
 }
 
 module_init(gfar_init);
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 7820720ceee..3cb901b2e24 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -46,7 +46,6 @@
 #include <linux/workqueue.h>
 #include <linux/ethtool.h>
 #include <linux/fsl_devices.h>
-#include "gianfar_mii.h"
 
 /* The maximum number of packets to be handled in one call of gfar_poll */
 #define GFAR_DEV_WEIGHT 64
@@ -126,9 +125,12 @@ extern const char gfar_driver_version[];
 #define DEFAULT_RX_COALESCE 0
 #define DEFAULT_RXCOUNT	0
 
-#define MIIMCFG_INIT_VALUE	0x00000007
-#define MIIMCFG_RESET           0x80000000
-#define MIIMIND_BUSY            0x00000001
+#define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \
+		| SUPPORTED_10baseT_Full \
+		| SUPPORTED_100baseT_Half \
+		| SUPPORTED_100baseT_Full \
+		| SUPPORTED_Autoneg \
+		| SUPPORTED_MII)
 
 /* TBI register addresses */
 #define MII_TBICON		0x11
@@ -826,9 +828,6 @@ extern void gfar_halt(struct net_device *dev);
 extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev,
 		int enable, u32 regnum, u32 read);
 void gfar_init_sysfs(struct net_device *dev);
-int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id,
-			  int regnum, u16 value);
-int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum);
 
 extern const struct ethtool_ops gfar_ethtool_ops;
 
diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h
deleted file mode 100644
index 65c242cd468..00000000000
--- a/drivers/net/gianfar_mii.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * drivers/net/gianfar_mii.h
- *
- * Gianfar Ethernet Driver -- MII Management Bus Implementation
- * Driver for the MDIO bus controller in the Gianfar register space
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala
- *
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifndef __GIANFAR_MII_H
-#define __GIANFAR_MII_H
-
-struct gfar_private; /* forward ref */
-
-#define MIIMIND_BUSY            0x00000001
-#define MIIMIND_NOTVALID        0x00000004
-
-#define MII_READ_COMMAND       0x00000001
-
-#define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \
-		| SUPPORTED_10baseT_Full \
-		| SUPPORTED_100baseT_Half \
-		| SUPPORTED_100baseT_Full \
-		| SUPPORTED_Autoneg \
-		| SUPPORTED_MII)
-
-struct gfar_mii {
-	u32	miimcfg;	/* 0x.520 - MII Management Config Register */
-	u32	miimcom;	/* 0x.524 - MII Management Command Register */
-	u32	miimadd;	/* 0x.528 - MII Management Address Register */
-	u32	miimcon;	/* 0x.52c - MII Management Control Register */
-	u32	miimstat;	/* 0x.530 - MII Management Status Register */
-	u32	miimind;	/* 0x.534 - MII Management Indicator Register */
-};
-
-int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
-int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
-int gfar_local_mdio_write(struct gfar_mii __iomem *regs, int mii_id,
-			  int regnum, u16 value);
-int gfar_local_mdio_read(struct gfar_mii __iomem *regs, int mii_id, int regnum);
-struct mii_bus *gfar_get_miibus(const struct gfar_private *priv);
-int __init gfar_mdio_init(void);
-void gfar_mdio_exit(void);
-
-void gfar_mdio_bus_name(char *name, struct device_node *np);
-#endif /* GIANFAR_PHY_H */
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 4a8d5747204..1c095c63f98 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -39,7 +39,7 @@
 #include <asm/ucc_fast.h>
 
 #include "ucc_geth.h"
-#include "ucc_geth_mii.h"
+#include "fsl_pq_mdio.h"
 
 #undef DEBUG
 
@@ -1557,7 +1557,7 @@ static int init_phy(struct net_device *dev)
 	of_node_put(phy);
 	of_node_put(mdio);
 
-	uec_mdio_bus_name(bus_name, mdio);
+	fsl_pq_mdio_bus_name(bus_name, mdio);
 	snprintf(phy_id, sizeof(phy_id), "%s:%02x",
                                 bus_name, *id);
 
@@ -3657,7 +3657,8 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 		if (err)
 			return -1;
 
-		snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "%x", res.start);
+		snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "%x",
+				res.start&0xfffff);
 	}
 
 	/* get the phy interface type, or default to MII */
@@ -3803,11 +3804,6 @@ static int __init ucc_geth_init(void)
 {
 	int i, ret;
 
-	ret = uec_mdio_init();
-
-	if (ret)
-		return ret;
-
 	if (netif_msg_drv(&debug))
 		printk(KERN_INFO "ucc_geth: " DRV_DESC "\n");
 	for (i = 0; i < 8; i++)
@@ -3816,16 +3812,12 @@ static int __init ucc_geth_init(void)
 
 	ret = of_register_platform_driver(&ucc_geth_driver);
 
-	if (ret)
-		uec_mdio_exit();
-
 	return ret;
 }
 
 static void __exit ucc_geth_exit(void)
 {
 	of_unregister_platform_driver(&ucc_geth_driver);
-	uec_mdio_exit();
 }
 
 module_init(ucc_geth_init);
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 16cbe42ba43..66d18971fa0 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -28,8 +28,6 @@
 #include <asm/ucc.h>
 #include <asm/ucc_fast.h>
 
-#include "ucc_geth_mii.h"
-
 #define DRV_DESC "QE UCC Gigabit Ethernet Controller"
 #define DRV_NAME "ucc_geth"
 #define DRV_VERSION "1.1"
@@ -184,6 +182,18 @@ struct ucc_geth {
 #define UCCE_RX_EVENTS  (UCCE_RXF | UCC_GETH_UCCE_BSY)
 #define UCCE_TX_EVENTS	(UCCE_TXB | UCC_GETH_UCCE_TXE)
 
+/* TBI defines */
+#define	ENET_TBI_MII_CR		0x00	/* Control */
+#define	ENET_TBI_MII_SR		0x01	/* Status */
+#define	ENET_TBI_MII_ANA	0x04	/* AN advertisement */
+#define	ENET_TBI_MII_ANLPBPA	0x05	/* AN link partner base page ability */
+#define	ENET_TBI_MII_ANEX	0x06	/* AN expansion */
+#define	ENET_TBI_MII_ANNPT	0x07	/* AN next page transmit */
+#define	ENET_TBI_MII_ANLPANP	0x08	/* AN link partner ability next page */
+#define	ENET_TBI_MII_EXST	0x0F	/* Extended status */
+#define	ENET_TBI_MII_JD		0x10	/* Jitter diagnostics */
+#define	ENET_TBI_MII_TBICON	0x11	/* TBI control */
+
 /* UCC GETH MACCFG1 (MAC Configuration 1 Register) */
 #define MACCFG1_FLOW_RX                         0x00000020	/* Flow Control
 								   Rx */
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 68a7f541413..a755bea559b 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -39,7 +39,6 @@
 #include <asm/types.h>
 
 #include "ucc_geth.h"
-#include "ucc_geth_mii.h"
 
 static char hw_stat_gstrings[][ETH_GSTRING_LEN] = {
 	"tx-64-frames",
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
deleted file mode 100644
index 54635911305..00000000000
--- a/drivers/net/ucc_geth_mii.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * drivers/net/ucc_geth_mii.c
- *
- * QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation
- * Provides Bus interface for MII Management regs in the UCC register space
- *
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * Authors: Li Yang <leoli@freescale.com>
- *	    Kim Phillips <kim.phillips@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/crc32.h>
-#include <linux/mii.h>
-#include <linux/phy.h>
-#include <linux/fsl_devices.h>
-#include <linux/of_platform.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/ucc.h>
-
-#include "ucc_geth_mii.h"
-#include "ucc_geth.h"
-
-#define DEBUG
-#ifdef DEBUG
-#define vdbg(format, arg...) printk(KERN_DEBUG , format "\n" , ## arg)
-#else
-#define vdbg(format, arg...) do {} while(0)
-#endif
-
-#define MII_DRV_DESC "QE UCC Ethernet Controller MII Bus"
-#define MII_DRV_NAME "fsl-uec_mdio"
-
-/* Write value to the PHY for this device to the register at regnum, */
-/* waiting until the write is done before it returns.  All PHY */
-/* configuration has to be done through the master UEC MIIM regs */
-int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
-{
-	struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
-
-	/* Setting up the MII Mangement Address Register */
-	out_be32(&regs->miimadd,
-		 (mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
-
-	/* Setting up the MII Mangement Control Register with the value */
-	out_be32(&regs->miimcon, value);
-
-	/* Wait till MII management write is complete */
-	while ((in_be32(&regs->miimind)) & MIIMIND_BUSY)
-		cpu_relax();
-
-	return 0;
-}
-
-/* Reads from register regnum in the PHY for device dev, */
-/* returning the value.  Clears miimcom first.  All PHY */
-/* configuration has to be done through the TSEC1 MIIM regs */
-int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
-{
-	struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
-	u16 value;
-
-	/* Setting up the MII Mangement Address Register */
-	out_be32(&regs->miimadd,
-		 (mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | regnum);
-
-	/* Clear miimcom, perform an MII management read cycle */
-	out_be32(&regs->miimcom, 0);
-	out_be32(&regs->miimcom, MIIMCOM_READ_CYCLE);
-
-	/* Wait till MII management write is complete */
-	while ((in_be32(&regs->miimind)) & (MIIMIND_BUSY | MIIMIND_NOT_VALID))
-		cpu_relax();
-
-	/* Read MII management status  */
-	value = in_be32(&regs->miimstat);
-
-	return value;
-}
-
-/* Reset the MIIM registers, and wait for the bus to free */
-static int uec_mdio_reset(struct mii_bus *bus)
-{
-	struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
-	unsigned int timeout = PHY_INIT_TIMEOUT;
-
-	mutex_lock(&bus->mdio_lock);
-
-	/* Reset the management interface */
-	out_be32(&regs->miimcfg, MIIMCFG_RESET_MANAGEMENT);
-
-	/* Setup the MII Mgmt clock speed */
-	out_be32(&regs->miimcfg, MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_112);
-
-	/* Wait until the bus is free */
-	while ((in_be32(&regs->miimind) & MIIMIND_BUSY) && timeout--)
-		cpu_relax();
-
-	mutex_unlock(&bus->mdio_lock);
-
-	if (timeout <= 0) {
-		printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name);
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *match)
-{
-	struct device *device = &ofdev->dev;
-	struct device_node *np = ofdev->node, *tempnp = NULL;
-	struct device_node *child = NULL;
-	struct ucc_mii_mng __iomem *regs;
-	struct mii_bus *new_bus;
-	struct resource res;
-	int k, err = 0;
-
-	new_bus = mdiobus_alloc();
-	if (NULL == new_bus)
-		return -ENOMEM;
-
-	new_bus->name = "UCC Ethernet Controller MII Bus";
-	new_bus->read = &uec_mdio_read;
-	new_bus->write = &uec_mdio_write;
-	new_bus->reset = &uec_mdio_reset;
-
-	memset(&res, 0, sizeof(res));
-
-	err = of_address_to_resource(np, 0, &res);
-	if (err)
-		goto reg_map_fail;
-
-	uec_mdio_bus_name(new_bus->id, np);
-
-	new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL);
-
-	if (NULL == new_bus->irq) {
-		err = -ENOMEM;
-		goto reg_map_fail;
-	}
-
-	for (k = 0; k < 32; k++)
-		new_bus->irq[k] = PHY_POLL;
-
-	while ((child = of_get_next_child(np, child)) != NULL) {
-		int irq = irq_of_parse_and_map(child, 0);
-		if (irq != NO_IRQ) {
-			const u32 *id = of_get_property(child, "reg", NULL);
-			new_bus->irq[*id] = irq;
-		}
-	}
-
-	/* Set the base address */
-	regs = ioremap(res.start, sizeof(struct ucc_mii_mng));
-
-	if (NULL == regs) {
-		err = -ENOMEM;
-		goto ioremap_fail;
-	}
-
-	new_bus->priv = (void __force *)regs;
-
-	new_bus->parent = device;
-	dev_set_drvdata(device, new_bus);
-
-	/* Read MII management master from device tree */
-	while ((tempnp = of_find_compatible_node(tempnp, "network", "ucc_geth"))
-	       != NULL) {
-		struct resource tempres;
-
-		err = of_address_to_resource(tempnp, 0, &tempres);
-		if (err)
-			goto bus_register_fail;
-
-		/* if our mdio regs fall within this UCC regs range */
-		if ((res.start >= tempres.start) &&
-		    (res.end <= tempres.end)) {
-			/* set this UCC to be the MII master */
-			const u32 *id;
-
-			id = of_get_property(tempnp, "cell-index", NULL);
-			if (!id) {
-				id = of_get_property(tempnp, "device-id", NULL);
-				if (!id)
-					goto bus_register_fail;
-			}
-
-			ucc_set_qe_mux_mii_mng(*id - 1);
-
-			/* assign the TBI an address which won't
-			 * conflict with the PHYs */
-			out_be32(&regs->utbipar, UTBIPAR_INIT_TBIPA);
-			break;
-		}
-	}
-
-	err = mdiobus_register(new_bus);
-	if (0 != err) {
-		printk(KERN_ERR "%s: Cannot register as MDIO bus\n",
-		       new_bus->name);
-		goto bus_register_fail;
-	}
-
-	return 0;
-
-bus_register_fail:
-	iounmap(regs);
-ioremap_fail:
-	kfree(new_bus->irq);
-reg_map_fail:
-	mdiobus_free(new_bus);
-
-	return err;
-}
-
-static int uec_mdio_remove(struct of_device *ofdev)
-{
-	struct device *device = &ofdev->dev;
-	struct mii_bus *bus = dev_get_drvdata(device);
-
-	mdiobus_unregister(bus);
-
-	dev_set_drvdata(device, NULL);
-
-	iounmap((void __iomem *)bus->priv);
-	bus->priv = NULL;
-	mdiobus_free(bus);
-
-	return 0;
-}
-
-static struct of_device_id uec_mdio_match[] = {
-	{
-		.type = "mdio",
-		.compatible = "ucc_geth_phy",
-	},
-	{
-		.compatible = "fsl,ucc-mdio",
-	},
-	{},
-};
-
-static struct of_platform_driver uec_mdio_driver = {
-	.name	= MII_DRV_NAME,
-	.probe	= uec_mdio_probe,
-	.remove	= uec_mdio_remove,
-	.match_table	= uec_mdio_match,
-};
-
-int __init uec_mdio_init(void)
-{
-	return of_register_platform_driver(&uec_mdio_driver);
-}
-
-/* called from __init ucc_geth_init, therefore can not be __exit */
-void uec_mdio_exit(void)
-{
-	of_unregister_platform_driver(&uec_mdio_driver);
-}
-
-void uec_mdio_bus_name(char *name, struct device_node *np)
-{
-        const u32 *reg;
-
-        reg = of_get_property(np, "reg", NULL);
-
-        snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0);
-}
-
diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h
deleted file mode 100644
index 840cf80235b..00000000000
--- a/drivers/net/ucc_geth_mii.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * drivers/net/ucc_geth_mii.h
- *
- * QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation
- * Provides Bus interface for MII Management regs in the UCC register space
- *
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * Authors: Li Yang <leoli@freescale.com>
- *	    Kim Phillips <kim.phillips@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifndef __UEC_MII_H
-#define __UEC_MII_H
-
-/* UCC GETH MIIMCFG (MII Management Configuration Register) */
-#define MIIMCFG_RESET_MANAGEMENT                0x80000000	/* Reset
-								   management */
-#define MIIMCFG_NO_PREAMBLE                     0x00000010	/* Preamble
-								   suppress */
-#define MIIMCFG_CLOCK_DIVIDE_SHIFT              (31 - 31)	/* clock divide
-								   << shift */
-#define MIIMCFG_CLOCK_DIVIDE_MAX                0xf	/* max clock divide */
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_2    0x00000000
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_4    0x00000001
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_6    0x00000002
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_8    0x00000003
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_10   0x00000004
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_14   0x00000005
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_16   0x00000008
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_20   0x00000006
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_28   0x00000007
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_32   0x00000009
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_48   0x0000000a
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_64   0x0000000b
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_80   0x0000000c
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_112  0x0000000d
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_160  0x0000000e
-#define MIIMCFG_MANAGEMENT_CLOCK_DIVIDE_BY_224  0x0000000f
-
-/* UCC GETH MIIMCOM (MII Management Command Register) */
-#define MIIMCOM_SCAN_CYCLE                      0x00000002	/* Scan cycle */
-#define MIIMCOM_READ_CYCLE                      0x00000001	/* Read cycle */
-
-/* UCC GETH MIIMADD (MII Management Address Register) */
-#define MIIMADD_PHY_ADDRESS_SHIFT               (31 - 23)	/* PHY Address
-								   << shift */
-#define MIIMADD_PHY_REGISTER_SHIFT              (31 - 31)	/* PHY Register
-								   << shift */
-
-/* UCC GETH MIIMCON (MII Management Control Register) */
-#define MIIMCON_PHY_CONTROL_SHIFT               (31 - 31)	/* PHY Control
-								   << shift */
-#define MIIMCON_PHY_STATUS_SHIFT                (31 - 31)	/* PHY Status
-								   << shift */
-
-/* UCC GETH MIIMIND (MII Management Indicator Register) */
-#define MIIMIND_NOT_VALID                       0x00000004	/* Not valid */
-#define MIIMIND_SCAN                            0x00000002	/* Scan in
-								   progress */
-#define MIIMIND_BUSY                            0x00000001
-
-/* Initial TBI Physical Address */
-#define UTBIPAR_INIT_TBIPA			0x1f
-
-struct ucc_mii_mng {
-	u32 miimcfg;		/* MII management configuration reg */
-	u32 miimcom;		/* MII management command reg */
-	u32 miimadd;		/* MII management address reg */
-	u32 miimcon;		/* MII management control reg */
-	u32 miimstat;		/* MII management status reg */
-	u32 miimind;		/* MII management indication reg */
-	u8 notcare[28];		/* Space holder */
-	u32 utbipar;		/* TBI phy address reg */
-} __attribute__ ((packed));
-
-/* TBI / MII Set Register */
-enum enet_tbi_mii_reg {
-	ENET_TBI_MII_CR = 0x00,	/* Control */
-	ENET_TBI_MII_SR = 0x01,	/* Status */
-	ENET_TBI_MII_ANA = 0x04,	/* AN advertisement */
-	ENET_TBI_MII_ANLPBPA = 0x05,	/* AN link partner base page ability */
-	ENET_TBI_MII_ANEX = 0x06,	/* AN expansion */
-	ENET_TBI_MII_ANNPT = 0x07,	/* AN next page transmit */
-	ENET_TBI_MII_ANLPANP = 0x08,	/* AN link partner ability next page */
-	ENET_TBI_MII_EXST = 0x0F,	/* Extended status */
-	ENET_TBI_MII_JD = 0x10,	/* Jitter diagnostics */
-	ENET_TBI_MII_TBICON = 0x11	/* TBI control */
-};
-
-int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
-int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
-int __init uec_mdio_init(void);
-void uec_mdio_exit(void);
-void uec_mdio_bus_name(char *name, struct device_node *np);
-#endif				/* __UEC_MII_H */