Merge branch 'linus' into tracing/hw-branch-tracing

50 files changed, 225 insertions, 139 deletions

diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 7edf6d913c1..765fd1c56cd 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -688,14 +688,6 @@ void __init acpi_early_init(void)
 	if (acpi_disabled)
 		return;
 
-	/*
-	 * ACPI CA initializes acpi_dbg_level to non-zero, which means
-	 * we get debug output merely by turning on CONFIG_ACPI_DEBUG.
-	 * Turn it off so we don't get output unless the user specifies
-	 * acpi.debug_level.
-	 */
-	acpi_dbg_level = 0;
-
 	printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
 
 	/* enable workarounds, unless strict ACPI spec. compliance */
diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c
index 670551b95e5..17ed5ac840f 100644
--- a/drivers/acpi/utilities/utglobal.c
+++ b/drivers/acpi/utilities/utglobal.c
@@ -64,7 +64,7 @@ u32 acpi_dbg_level = ACPI_DEBUG_DEFAULT;
 
 /* Debug switch - layer (component) mask */
 
-u32 acpi_dbg_layer = ACPI_COMPONENT_DEFAULT | ACPI_ALL_DRIVERS;
+u32 acpi_dbg_layer = 0;
 u32 acpi_gbl_nesting_level = 0;
 
 /* Debugger globals */
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 9364dc55425..9f7c543cc04 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1693,6 +1693,11 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
 	for (i = 0; i <= h->highest_lun; i++) {
 		int j;
 		drv_found = 0;
+
+		/* skip holes in the array from already deleted drives */
+		if (h->drv[i].raid_level == -1)
+			continue;
+
 		for (j = 0; j < num_luns; j++) {
 			memcpy(&lunid, &ld_buff->LUN[j][0], 4);
 			lunid = le32_to_cpu(lunid);
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 5317e08221e..65799651737 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -388,7 +388,10 @@ int dma_async_device_register(struct dma_device *device)
 
 	init_completion(&device->done);
 	kref_init(&device->refcount);
+
+	mutex_lock(&dma_list_mutex);
 	device->dev_id = id++;
+	mutex_unlock(&dma_list_mutex);
 
 	/* represent channels in sysfs. Probably want devs too */
 	list_for_each_entry(chan, &device->channels, device_node) {
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index ecd743f7cc6..6607fdd00b1 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -1341,10 +1341,12 @@ static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan)
  */
 #define IOAT_TEST_SIZE 2000
 
+DECLARE_COMPLETION(test_completion);
 static void ioat_dma_test_callback(void *dma_async_param)
 {
 	printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n",
 		dma_async_param);
+	complete(&test_completion);
 }
 
 /**
@@ -1410,7 +1412,8 @@ static int ioat_dma_self_test(struct ioatdma_device *device)
 		goto free_resources;
 	}
 	device->common.device_issue_pending(dma_chan);
-	msleep(1);
+
+	wait_for_completion_timeout(&test_completion, msecs_to_jiffies(3000));
 
 	if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
 					!= DMA_SUCCESS) {
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index c7a9306d951..6be31726220 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -85,18 +85,28 @@ iop_adma_run_tx_complete_actions(struct iop_adma_desc_slot *desc,
 			enum dma_ctrl_flags flags = desc->async_tx.flags;
 			u32 src_cnt;
 			dma_addr_t addr;
+			dma_addr_t dest;
 
+			src_cnt = unmap->unmap_src_cnt;
+			dest = iop_desc_get_dest_addr(unmap, iop_chan);
 			if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
-				addr = iop_desc_get_dest_addr(unmap, iop_chan);
-				dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+				enum dma_data_direction dir;
+
+				if (src_cnt > 1) /* is xor? */
+					dir = DMA_BIDIRECTIONAL;
+				else
+					dir = DMA_FROM_DEVICE;
+
+				dma_unmap_page(dev, dest, len, dir);
 			}
 
 			if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
-				src_cnt = unmap->unmap_src_cnt;
 				while (src_cnt--) {
 					addr = iop_desc_get_src_addr(unmap,
 								     iop_chan,
 								     src_cnt);
+					if (addr == dest)
+						continue;
 					dma_unmap_page(dev, addr, len,
 						       DMA_TO_DEVICE);
 				}
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 0328da020a1..bcda1742641 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -311,17 +311,26 @@ mv_xor_run_tx_complete_actions(struct mv_xor_desc_slot *desc,
 			enum dma_ctrl_flags flags = desc->async_tx.flags;
 			u32 src_cnt;
 			dma_addr_t addr;
+			dma_addr_t dest;
 
+			src_cnt = unmap->unmap_src_cnt;
+			dest = mv_desc_get_dest_addr(unmap);
 			if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
-				addr = mv_desc_get_dest_addr(unmap);
-				dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+				enum dma_data_direction dir;
+
+				if (src_cnt > 1) /* is xor ? */
+					dir = DMA_BIDIRECTIONAL;
+				else
+					dir = DMA_FROM_DEVICE;
+				dma_unmap_page(dev, dest, len, dir);
 			}
 
 			if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
-				src_cnt = unmap->unmap_src_cnt;
 				while (src_cnt--) {
 					addr = mv_desc_get_src_addr(unmap,
 								    src_cnt);
+					if (addr == dest)
+						continue;
 					dma_unmap_page(dev, addr, len,
 						       DMA_TO_DEVICE);
 				}
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 5fcd3d89c75..4041e914328 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -394,6 +394,12 @@ static void edac_device_workq_function(struct work_struct *work_req)
 
 	mutex_lock(&device_ctls_mutex);
 
+	/* If we are being removed, bail out immediately */
+	if (edac_dev->op_state == OP_OFFLINE) {
+		mutex_unlock(&device_ctls_mutex);
+		return;
+	}
+
 	/* Only poll controllers that are running polled and have a check */
 	if ((edac_dev->op_state == OP_RUNNING_POLL) &&
 		(edac_dev->edac_check != NULL)) {
@@ -585,14 +591,14 @@ struct edac_device_ctl_info *edac_device_del_device(struct device *dev)
 	/* mark this instance as OFFLINE */
 	edac_dev->op_state = OP_OFFLINE;
 
-	/* clear workq processing on this instance */
-	edac_device_workq_teardown(edac_dev);
-
 	/* deregister from global list */
 	del_edac_device_from_global_list(edac_dev);
 
 	mutex_unlock(&device_ctls_mutex);
 
+	/* clear workq processing on this instance */
+	edac_device_workq_teardown(edac_dev);
+
 	/* Tear down the sysfs entries for this instance */
 	edac_device_remove_sysfs(edac_dev);
 
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 553dd4bc307..afa8a12cd00 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -717,7 +717,7 @@ static int i915_getparam(struct drm_device *dev, void *data,
 		value = dev->pci_device;
 		break;
 	case I915_PARAM_HAS_GEM:
-		value = 1;
+		value = dev_priv->has_gem;
 		break;
 	default:
 		DRM_ERROR("Unknown parameter %d\n", param->param);
@@ -830,6 +830,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
 	dev_priv->regs = ioremap(base, size);
 
+#ifdef CONFIG_HIGHMEM64G
+	/* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */
+	dev_priv->has_gem = 0;
+#else
+	/* enable GEM by default */
+	dev_priv->has_gem = 1;
+#endif
+
 	i915_gem_load(dev);
 
 	/* Init HWS */
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index adc972cc6bf..b3cc4731aa7 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -106,6 +106,8 @@ struct intel_opregion {
 typedef struct drm_i915_private {
 	struct drm_device *dev;
 
+	int has_gem;
+
 	void __iomem *regs;
 	drm_local_map_t *sarea;
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ad672d85482..24fe8c10b4b 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2309,7 +2309,14 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
 	}
 
 	obj_priv = obj->driver_private;
-	args->busy = obj_priv->active;
+	/* Don't count being on the flushing list against the object being
+	 * done.  Otherwise, a buffer left on the flushing list but not getting
+	 * flushed (because nobody's flushing that domain) won't ever return
+	 * unbusy and get reused by libdrm's bo cache.  The other expected
+	 * consumer of this interface, OpenGL's occlusion queries, also specs
+	 * that the objects get unbusy "eventually" without any interference.
+	 */
+	args->busy = obj_priv->active && obj_priv->last_rendering_seqno != 0;
 
 	drm_gem_object_unreference(obj);
 	mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c
index 99be11418ac..8289e16419a 100644
--- a/drivers/gpu/drm/radeon/radeon_irq.c
+++ b/drivers/gpu/drm/radeon/radeon_irq.c
@@ -44,7 +44,7 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state)
 	else
 		dev_priv->irq_enable_reg &= ~mask;
 
-	if (!dev->irq_enabled)
+	if (dev->irq_enabled)
 		RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
 }
 
@@ -57,7 +57,7 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state)
 	else
 		dev_priv->r500_disp_irq_reg &= ~mask;
 
-	if (!dev->irq_enabled)
+	if (dev->irq_enabled)
 		RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg);
 }
 
diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c
index 53f079cc00a..d8ede85fe17 100644
--- a/drivers/ide/cs5530.c
+++ b/drivers/ide/cs5530.c
@@ -81,11 +81,12 @@ static u8 cs5530_udma_filter(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	ide_drive_t *mate = ide_get_pair_dev(drive);
-	u16 *mateid = mate->id;
+	u16 *mateid;
 	u8 mask = hwif->ultra_mask;
 
 	if (mate == NULL)
 		goto out;
+	mateid = mate->id;
 
 	if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
 		if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c
index f1a8758e3a9..ec7f766ef5e 100644
--- a/drivers/ide/sc1200.c
+++ b/drivers/ide/sc1200.c
@@ -104,11 +104,12 @@ static u8 sc1200_udma_filter(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	ide_drive_t *mate = ide_get_pair_dev(drive);
-	u16 *mateid = mate->id;
+	u16 *mateid;
 	u8 mask = hwif->ultra_mask;
 
 	if (mate == NULL)
 		goto out;
+	mateid = mate->id;
 
 	if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
 		if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index ac89a5deaca..ab7c8e4a61f 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -208,16 +208,19 @@ static void bitmap_checkfree(struct bitmap *bitmap, unsigned long page)
  */
 
 /* IO operations when bitmap is stored near all superblocks */
-static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long index)
+static struct page *read_sb_page(mddev_t *mddev, long offset,
+				 struct page *page,
+				 unsigned long index, int size)
 {
 	/* choose a good rdev and read the page from there */
 
 	mdk_rdev_t *rdev;
 	struct list_head *tmp;
-	struct page *page = alloc_page(GFP_KERNEL);
 	sector_t target;
 
 	if (!page)
+		page = alloc_page(GFP_KERNEL);
+	if (!page)
 		return ERR_PTR(-ENOMEM);
 
 	rdev_for_each(rdev, tmp, mddev) {
@@ -227,7 +230,9 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde
 
 		target = rdev->sb_start + offset + index * (PAGE_SIZE/512);
 
-		if (sync_page_io(rdev->bdev, target, PAGE_SIZE, page, READ)) {
+		if (sync_page_io(rdev->bdev, target,
+				 roundup(size, bdev_hardsect_size(rdev->bdev)),
+				 page, READ)) {
 			page->index = index;
 			attach_page_buffers(page, NULL); /* so that free_buffer will
 							  * quietly no-op */
@@ -544,7 +549,9 @@ static int bitmap_read_sb(struct bitmap *bitmap)
 
 		bitmap->sb_page = read_page(bitmap->file, 0, bitmap, bytes);
 	} else {
-		bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, 0);
+		bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset,
+					       NULL,
+					       0, sizeof(bitmap_super_t));
 	}
 	if (IS_ERR(bitmap->sb_page)) {
 		err = PTR_ERR(bitmap->sb_page);
@@ -957,11 +964,16 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
 				 */
 				page = bitmap->sb_page;
 				offset = sizeof(bitmap_super_t);
+				read_sb_page(bitmap->mddev, bitmap->offset,
+					     page,
+					     index, count);
 			} else if (file) {
 				page = read_page(file, index, bitmap, count);
 				offset = 0;
 			} else {
-				page = read_sb_page(bitmap->mddev, bitmap->offset, index);
+				page = read_sb_page(bitmap->mddev, bitmap->offset,
+						    NULL,
+						    index, count);
 				offset = 0;
 			}
 			if (IS_ERR(page)) { /* read error */
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 73dc2ee9b01..b34301d56cd 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -9,11 +9,11 @@ config DVB_B2C2_FLEXCOP
 	select DVB_STV0297 if !DVB_FE_CUSTOMISE
 	select DVB_BCM3510 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
 	select DVB_S5H1420 if !DVB_FE_CUSTOMISE
 	select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE
 	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
 	select DVB_CX24123 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Support for the digital TV receiver chip made by B2C2 Inc. included in
 	  Technisats PCI cards and USB boxes.
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index a127a4175c4..5cded370854 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -628,12 +628,14 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 	}
 
 	/* try the cable dvb (stv0297) */
+	fc->fc_i2c_adap[0].no_base_addr = 1;
 	fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
 	if (fc->fe != NULL) {
 		fc->dev_type = FC_CABLE;
 		fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
 		goto fe_found;
 	}
+	fc->fc_i2c_adap[0].no_base_addr = 0;
 
 	/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
 	fc->fe = dvb_attach(mt312_attach,
diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c
index 43a112ec6d4..f13783f08f0 100644
--- a/drivers/media/dvb/b2c2/flexcop-i2c.c
+++ b/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -47,9 +47,13 @@ static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
 	int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
 		ret;
 
-	r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
 	ret = flexcop_i2c_operation(i2c->fc, &r100);
 	if (ret != 0) {
+		deb_i2c("Retrying operation\n");
+		r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
+		ret = flexcop_i2c_operation(i2c->fc, &r100);
+	}
+	if (ret != 0) {
 		deb_i2c("read failed. %d\n", ret);
 		return ret;
 	}
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index 7e9c090fc04..27edb0ece58 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -8,7 +8,7 @@ config DVB_BT8XX
 	select DVB_OR51211 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Support for PCI cards based on the Bt8xx PCI bridge. Examples are
 	  the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 62b68c291d9..49f7b20c25d 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -24,8 +24,8 @@ config DVB_USB_A800
 	tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	select DVB_PLL if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
 
@@ -34,7 +34,7 @@ config DVB_USB_DIBUSB_MB
 	depends on DVB_USB
 	select DVB_PLL if !DVB_FE_CUSTOMISE
 	select DVB_DIB3000MB
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
 	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
@@ -55,7 +55,7 @@ config DVB_USB_DIBUSB_MC
 	tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Support for USB2.0 DVB-T receivers based on reference designs made by
 	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
@@ -73,11 +73,11 @@ config DVB_USB_DIB0700
 	select DVB_DIB7000M
 	select DVB_DIB3000MC
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
 	select DVB_TUNER_DIB0070
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
 	  USB bridge is also present in devices having the DiB7700 DVB-T-USB
@@ -95,7 +95,7 @@ config DVB_USB_UMT_010
 	depends on DVB_USB
 	select DVB_PLL if !DVB_FE_CUSTOMISE
 	select DVB_DIB3000MC
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
 
@@ -107,11 +107,11 @@ config DVB_USB_CXUSB
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
 	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
 	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the Conexant USB2.0 hybrid reference design.
 	  Currently, only DVB and ATSC modes are supported, analog mode
@@ -124,9 +124,9 @@ config DVB_USB_M920X
 	tristate "Uli m920x DVB-T USB2.0 support"
 	depends on DVB_USB
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
 	  Currently, only devices with a product id of
@@ -137,7 +137,7 @@ config DVB_USB_GL861
 	tristate "Genesys Logic GL861 USB2.0 support"
 	depends on DVB_USB
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
 	  receiver with USB ID 0db0:5581.
@@ -146,7 +146,7 @@ config DVB_USB_AU6610
 	tristate "Alcor Micro AU6610 USB2.0 support"
 	depends on DVB_USB
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
 
@@ -198,8 +198,8 @@ config DVB_USB_NOVA_T_USB2
 	tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	select DVB_PLL if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
 
@@ -235,8 +235,8 @@ config DVB_USB_OPERA1
 config DVB_USB_AF9005
 	tristate "Afatech AF9005 DVB-T USB1.1 support"
 	depends on DVB_USB && EXPERIMENTAL
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
 	  and the TerraTec Cinergy T USB XE (Rev.1)
@@ -284,7 +284,7 @@ config DVB_USB_DTV5100
 	tristate "AME DTV-5100 USB2.0 DVB-T support"
 	depends on DVB_USB
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
 
@@ -293,9 +293,9 @@ config DVB_USB_AF9015
 	depends on DVB_USB && EXPERIMENTAL
 	select DVB_AF9013
 	select DVB_PLL              if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2060   if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010   if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060   if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_QT1010   if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index f28d3ae59e0..39173278891 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -446,13 +446,13 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
 		== NULL ? -ENODEV : 0;
 }
 
-#define DEFAULT_RC_INTERVAL 150
+#define DEFAULT_RC_INTERVAL 50
 
 static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
 
 /* Number of keypresses to ignore before start repeating */
-#define RC_REPEAT_DELAY 2
-#define RC_REPEAT_DELAY_V1_20 5
+#define RC_REPEAT_DELAY 6
+#define RC_REPEAT_DELAY_V1_20 10
 
 
 
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 867027ceab3..401a04effc0 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -106,7 +106,7 @@ config DVB_BUDGET_CI
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
 	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
 	select VIDEO_IR
 	help
 	  Support for simple SAA7146 based DVB cards
diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c
index e6ca4012b5f..0ea85a05e5c 100644
--- a/drivers/media/video/compat_ioctl32.c
+++ b/drivers/media/video/compat_ioctl32.c
@@ -831,7 +831,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int ret = -ENOIOCTLCMD;
 
-	if (!file->f_op->ioctl)
+	if (!file->f_op->ioctl && !file->f_op->unlocked_ioctl)
 		return ret;
 
 	switch (cmd) {
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index ef48565de7f..8940b5387de 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -9,7 +9,7 @@ config VIDEO_CX18
 	select VIDEO_CX2341X
 	select VIDEO_CS5345
 	select DVB_S5H1409 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
 	---help---
 	  This is a video4linux driver for Conexant cx23418 based
 	  PCI combo video recorder devices.
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index 8c1b7fa47a4..00f1e2e8889 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -11,16 +11,16 @@ config VIDEO_CX23885
 	select VIDEO_CX25840
 	select VIDEO_CX2341X
 	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2131 if !DVB_FE_CUSTOMISE
 	select DVB_S5H1409 if !DVB_FE_CUSTOMISE
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+	select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
+	select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMIZE
 	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
-	select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
 	---help---
 	  This is a video4linux driver for Conexant 23885 based
 	  TV cards.
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 0b9e5fac623..b0f837588e0 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -56,12 +56,12 @@ config VIDEO_CX88_DVB
 	select DVB_NXT200X if !DVB_FE_CUSTOMISE
 	select DVB_CX24123 if !DVB_FE_CUSTOMISE
 	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_CX24116 if !DVB_FE_CUSTOMISE
 	select DVB_STV0299 if !DVB_FE_CUSTOMISE
 	select DVB_STV0288 if !DVB_FE_CUSTOMISE
 	select DVB_STB6000 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
 	---help---
 	  This adds support for DVB/ATSC cards based on the
 	  Conexant 2388x chip.
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 610f535a257..4ea1f1e0489 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -549,10 +549,11 @@ static int em28xx_config(struct em28xx *dev)
 static void em28xx_config_i2c(struct em28xx *dev)
 {
 	struct v4l2_routing route;
+	int zero = 0;
 
 	route.input = INPUT(dev->ctl_input)->vmux;
 	route.output = 0;
-	em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL);
+	em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, &zero);
 	em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
 	em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL);
 }
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 748a87e82e4..02a6e9ef033 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1264,10 +1264,10 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv,
 	struct gspca_dev *gspca_dev = priv;
 	int ret;
 
-	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
-		return -ERESTARTSYS;
 	if (!gspca_dev->sd_desc->set_jcomp)
 		return -EINVAL;
+	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+		return -ERESTARTSYS;
 	ret = gspca_dev->sd_desc->set_jcomp(gspca_dev, jpegcomp);
 	mutex_unlock(&gspca_dev->usb_lock);
 	return ret;
diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig
index 19eb274c9cd..854c2a88535 100644
--- a/drivers/media/video/pvrusb2/Kconfig
+++ b/drivers/media/video/pvrusb2/Kconfig
@@ -42,7 +42,7 @@ config VIDEO_PVRUSB2_DVB
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
-	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
 	select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
 	---help---
 
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 7021bbf5897..fc2164e28e7 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -34,9 +34,9 @@ config VIDEO_SAA7134_DVB
 	select DVB_NXT200X if !DVB_FE_CUSTOMISE
 	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
 	select DVB_TDA826X if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
 	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
 	---help---
 	  This adds support for DVB cards based on the
 	  Philips saa7134 chip.
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index d62fd4f6b52..ee090413e59 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2008,6 +2008,9 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
 		return FAILED;
 	}
 
+	/* make sure we have no outstanding commands at this stage */
+	mptscsih_flush_running_cmds(hd);
+
 	ioc = hd->ioc;
 	printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
 	    ioc->name, SCpnt);
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index a1a3d0e5d2b..9e8222f9e90 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -543,9 +543,9 @@ bnx2_free_rx_mem(struct bnx2 *bp)
 		for (j = 0; j < bp->rx_max_pg_ring; j++) {
 			if (rxr->rx_pg_desc_ring[j])
 				pci_free_consistent(bp->pdev, RXBD_RING_SIZE,
-						    rxr->rx_pg_desc_ring[i],
-						    rxr->rx_pg_desc_mapping[i]);
-			rxr->rx_pg_desc_ring[i] = NULL;
+						    rxr->rx_pg_desc_ring[j],
+						    rxr->rx_pg_desc_mapping[j]);
+			rxr->rx_pg_desc_ring[j] = NULL;
 		}
 		if (rxr->rx_pg_ring)
 			vfree(rxr->rx_pg_ring);
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index c414554ac32..36cb6e95b46 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -959,7 +959,7 @@ static void enc28j60_hw_rx(struct net_device *ndev)
 			ndev->stats.rx_packets++;
 			ndev->stats.rx_bytes += len;
 			ndev->last_rx = jiffies;
-			netif_rx(skb);
+			netif_rx_ni(skb);
 		}
 	}
 	/*
diff --git a/drivers/net/jme.h b/drivers/net/jme.h
index f863aee6648..3f5d9154324 100644
--- a/drivers/net/jme.h
+++ b/drivers/net/jme.h
@@ -22,7 +22,7 @@
  */
 
 #ifndef __JME_H_INCLUDED__
-#define __JME_H_INCLUDEE__
+#define __JME_H_INCLUDED__
 
 #define DRV_NAME	"jme"
 #define DRV_VERSION	"1.0.3"
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 536bda1f428..289fc267edf 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -105,8 +105,6 @@ int mdiobus_register(struct mii_bus *bus)
 		return -EINVAL;
 	}
 
-	bus->state = MDIOBUS_REGISTERED;
-
 	mutex_init(&bus->mdio_lock);
 
 	if (bus->reset)
@@ -123,6 +121,9 @@ int mdiobus_register(struct mii_bus *bus)
 		}
 	}
 
+	if (!err)
+		bus->state = MDIOBUS_REGISTERED;
+
 	pr_info("%s: probed\n", bus->name);
 
 	return err;
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 7e857e938ad..714a23035de 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -116,6 +116,7 @@ struct ppp {
 	unsigned long	last_xmit;	/* jiffies when last pkt sent 9c */
 	unsigned long	last_recv;	/* jiffies when last pkt rcvd a0 */
 	struct net_device *dev;		/* network interface device a4 */
+	int		closing;	/* is device closing down? a8 */
 #ifdef CONFIG_PPP_MULTILINK
 	int		nxchan;		/* next channel to send something on */
 	u32		nxseq;		/* next sequence number to send */
@@ -995,7 +996,7 @@ ppp_xmit_process(struct ppp *ppp)
 	struct sk_buff *skb;
 
 	ppp_xmit_lock(ppp);
-	if (ppp->dev) {
+	if (!ppp->closing) {
 		ppp_push(ppp);
 		while (!ppp->xmit_pending
 		       && (skb = skb_dequeue(&ppp->file.xq)))
@@ -1463,8 +1464,7 @@ static inline void
 ppp_do_recv(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
 {
 	ppp_recv_lock(ppp);
-	/* ppp->dev == 0 means interface is closing down */
-	if (ppp->dev)
+	if (!ppp->closing)
 		ppp_receive_frame(ppp, skb, pch);
 	else
 		kfree_skb(skb);
@@ -2498,18 +2498,16 @@ init_ppp_file(struct ppp_file *pf, int kind)
  */
 static void ppp_shutdown_interface(struct ppp *ppp)
 {
-	struct net_device *dev;
-
 	mutex_lock(&all_ppp_mutex);
-	ppp_lock(ppp);
-	dev = ppp->dev;
-	ppp->dev = NULL;
-	ppp_unlock(ppp);
 	/* This will call dev_close() for us. */
-	if (dev) {
-		unregister_netdev(dev);
-		free_netdev(dev);
-	}
+	ppp_lock(ppp);
+	if (!ppp->closing) {
+		ppp->closing = 1;
+		ppp_unlock(ppp);
+		unregister_netdev(ppp->dev);
+	} else
+		ppp_unlock(ppp);
+
 	cardmap_set(&all_ppp_units, ppp->file.index, NULL);
 	ppp->file.dead = 1;
 	ppp->owner = NULL;
@@ -2554,7 +2552,7 @@ static void ppp_destroy_interface(struct ppp *ppp)
 	if (ppp->xmit_pending)
 		kfree_skb(ppp->xmit_pending);
 
-	kfree(ppp);
+	free_netdev(ppp->dev);
 }
 
 /*
@@ -2616,7 +2614,7 @@ ppp_connect_channel(struct channel *pch, int unit)
 	if (pch->file.hdrlen > ppp->file.hdrlen)
 		ppp->file.hdrlen = pch->file.hdrlen;
 	hdrlen = pch->file.hdrlen + 2;	/* for protocol bytes */
-	if (ppp->dev && hdrlen > ppp->dev->hard_header_len)
+	if (hdrlen > ppp->dev->hard_header_len)
 		ppp->dev->hard_header_len = hdrlen;
 	list_add_tail(&pch->clist, &ppp->channels);
 	++ppp->n_channels;
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 1d2ef8f4778..5a40f2d78be 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1509,6 +1509,11 @@ static int __netdev_rx(struct net_device *dev, int *quota)
 		desc->status = 0;
 		np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE;
 	}
+
+	if (*quota == 0) {	/* out of rx quota */
+		retcode = 1;
+		goto out;
+	}
 	writew(np->rx_done, np->base + CompletionQConsumerIdx);
 
  out:
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index c41d6876136..e60498232b9 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -1098,6 +1098,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
 	dma_addr_t	tail_list_phys;
 	u8		*tail_buffer;
 	unsigned long	flags;
+	unsigned int    txlen;
 
 	if ( ! priv->phyOnline ) {
 		TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  %s PHY is not ready\n",
@@ -1108,6 +1109,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
 
 	if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
 		return 0;
+	txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE);
 
 	tail_list = priv->txList + priv->txTail;
 	tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail;
@@ -1125,16 +1127,16 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
 
 	if ( bbuf ) {
 		tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE );
-		skb_copy_from_linear_data(skb, tail_buffer, skb->len);
+		skb_copy_from_linear_data(skb, tail_buffer, txlen);
 	} else {
 		tail_list->buffer[0].address = pci_map_single(priv->pciDev,
-							      skb->data, skb->len,
+							      skb->data, txlen,
 							      PCI_DMA_TODEVICE);
 		TLan_StoreSKB(tail_list, skb);
 	}
 
-	tail_list->frameSize = (u16) skb->len;
-	tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
+	tail_list->frameSize = (u16) txlen;
+	tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen;
 	tail_list->buffer[1].count = 0;
 	tail_list->buffer[1].address = 0;
 
@@ -1431,7 +1433,9 @@ static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
 		if ( ! bbuf ) {
 			struct sk_buff *skb = TLan_GetSKB(head_list);
 			pci_unmap_single(priv->pciDev, head_list->buffer[0].address,
-					 skb->len, PCI_DMA_TODEVICE);
+					 max(skb->len,
+					     (unsigned int)TLAN_MIN_FRAME_SIZE),
+					 PCI_DMA_TODEVICE);
 			dev_kfree_skb_any(skb);
 			head_list->buffer[8].address = 0;
 			head_list->buffer[9].address = 0;
@@ -2055,9 +2059,12 @@ static void TLan_FreeLists( struct net_device *dev )
 			list = priv->txList + i;
 			skb = TLan_GetSKB(list);
 			if ( skb ) {
-				pci_unmap_single(priv->pciDev,
-						 list->buffer[0].address, skb->len,
-						 PCI_DMA_TODEVICE);
+				pci_unmap_single(
+					priv->pciDev,
+					list->buffer[0].address,
+					max(skb->len,
+					    (unsigned int)TLAN_MIN_FRAME_SIZE),
+					PCI_DMA_TODEVICE);
 				dev_kfree_skb_any( skb );
 				list->buffer[8].address = 0;
 				list->buffer[9].address = 0;
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index f9e244da30a..9bcb6cbd5aa 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -113,7 +113,7 @@ struct acpiphp_slot {
 
 	u8		device;		/* pci device# */
 
-	u32		sun;		/* ACPI _SUN (slot unique number) */
+	unsigned long long sun;		/* ACPI _SUN (slot unique number) */
 	u32		flags;		/* see below */
 };
 
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index 95b536a23d2..43c10bd261b 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -337,7 +337,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
 	slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
 
 	acpiphp_slot->slot = slot;
-	snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun);
+	snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun);
 
 	retval = pci_hp_register(slot->hotplug_slot,
 					acpiphp_slot->bridge->pci_bus,
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 955aae4071f..3affc6472e6 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -255,13 +255,13 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 
 		bridge->nr_slots++;
 
-		dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n",
+		dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n",
 				slot->sun, pci_domain_nr(bridge->pci_bus),
 				bridge->pci_bus->number, slot->device);
 		retval = acpiphp_register_hotplug_slot(slot);
 		if (retval) {
 			if (retval == -EBUSY)
-				warn("Slot %d already registered by another "
+				warn("Slot %llu already registered by another "
 					"hotplug driver\n", slot->sun);
 			else
 				warn("acpiphp_register_hotplug_slot failed "
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index c892daae74d..633e743442a 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -1402,10 +1402,6 @@ static int __init ibmphp_init(void)
 		goto error;
 	}
 
-	/* lock ourselves into memory with a module 
-	 * count of -1 so that no one can unload us. */
-	module_put(THIS_MODULE);
-
 exit:
 	return rc;
 
@@ -1423,4 +1419,3 @@ static void __exit ibmphp_exit(void)
 }
 
 module_init(ibmphp_init);
-module_exit(ibmphp_exit);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 4b23bc39b11..39cf248d24e 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -432,18 +432,19 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
 		goto err_out_release_ctlr;
 	}
 
+	/* Check if slot is occupied */
 	t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
-
-	t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */
-	if (value && pciehp_force) {
-		rc = pciehp_enable_slot(t_slot);
-		if (rc)	/* -ENODEV: shouldn't happen, but deal with it */
-			value = 0;
-	}
-	if ((POWER_CTRL(ctrl)) && !value) {
-		rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/
-		if (rc)
-			goto err_out_free_ctrl_slot;
+	t_slot->hpc_ops->get_adapter_status(t_slot, &value);
+	if (value) {
+		if (pciehp_force)
+			pciehp_enable_slot(t_slot);
+	} else {
+		/* Power off slot if not occupied */
+		if (POWER_CTRL(ctrl)) {
+			rc = t_slot->hpc_ops->power_off_slot(t_slot);
+			if (rc)
+				goto err_out_free_ctrl_slot;
+		}
 	}
 
 	return 0;
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index dfc63d01f20..aac7006949f 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -252,7 +252,7 @@ static void report_resume(struct pci_dev *dev, void *data)
 
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
-		!dev->driver->err_handler->slot_reset)
+		!dev->driver->err_handler->resume)
 		return;
 
 	err_handler = dev->driver->err_handler;
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index 2cd77ab8fc6..054e05294af 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -328,6 +328,13 @@ isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
 	int sr;
 	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
 
+	/* The clock has an 8 bit wide bcd-coded register (they never learn)
+	 * for the year. tm_year is an offset from 1900 and we are interested
+	 * in the 2000-2099 range, so any value less than 100 is invalid.
+	 */
+	if (tm->tm_year < 100)
+		return -EINVAL;
+
 	regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
 	regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
 	regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 162cd927d94..94acbeed4e7 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -175,8 +175,8 @@ static struct aac_driver_ident aac_drivers[] = {
 	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "catapult        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "tomcat          ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */
-	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2120S   ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */
-	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2120S   ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG },		      /* Adaptec 2120S (Crusader) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG },		      /* Adaptec 2200S (Vulcan) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */
 	{ aac_rx_init, "aacraid",  "Legend  ", "Legend S220     ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */
 	{ aac_rx_init, "aacraid",  "Legend  ", "Legend S230     ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */
diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c
index 2a5b29d1217..e2dd6a45924 100644
--- a/drivers/scsi/ibmvscsi/ibmvstgt.c
+++ b/drivers/scsi/ibmvscsi/ibmvstgt.c
@@ -864,21 +864,23 @@ static int ibmvstgt_probe(struct vio_dev *dev, const struct vio_device_id *id)
 
 	INIT_WORK(&vport->crq_work, handle_crq);
 
-	err = crq_queue_create(&vport->crq_queue, target);
+	err = scsi_add_host(shost, target->dev);
 	if (err)
 		goto free_srp_target;
 
-	err = scsi_add_host(shost, target->dev);
+	err = scsi_tgt_alloc_queue(shost);
 	if (err)
-		goto destroy_queue;
+		goto remove_host;
 
-	err = scsi_tgt_alloc_queue(shost);
+	err = crq_queue_create(&vport->crq_queue, target);
 	if (err)
-		goto destroy_queue;
+		goto free_queue;
 
 	return 0;
-destroy_queue:
-	crq_queue_destroy(target);
+free_queue:
+	scsi_tgt_free_queue(shost);
+remove_host:
+	scsi_remove_host(shost);
 free_srp_target:
 	srp_target_free(target);
 put_host:
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 801c7cf54d2..3fdee7370cc 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -489,12 +489,6 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 		if (!__kfifo_get(session->cmdpool.queue,
 				 (void*)&task, sizeof(void*)))
 			return NULL;
-
-		if ((hdr->opcode == (ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE)) &&
-		     hdr->ttt == RESERVED_ITT) {
-			conn->ping_task = task;
-			conn->last_ping = jiffies;
-		}
 	}
 	/*
 	 * released in complete pdu for task we expect a response for, and
@@ -703,6 +697,11 @@ static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr)
 	task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0);
 	if (!task)
 		iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n");
+	else if (!rhdr) {
+		/* only track our nops */
+		conn->ping_task = task;
+		conn->last_ping = jiffies;
+	}
 }
 
 static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index fa45a1a6686..148d3af92ae 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -648,8 +648,8 @@ static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd)
 	struct request *req = cmd->request;
 	unsigned long flags;
 
-	scsi_unprep_request(req);
 	spin_lock_irqsave(q->queue_lock, flags);
+	scsi_unprep_request(req);
 	blk_requeue_request(q, req);
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index 0d15b0eaf79..5139c25ca96 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -356,7 +356,9 @@ int w1_reset_select_slave(struct w1_slave *sl)
 		w1_write_8(sl->master, W1_SKIP_ROM);
 	else {
 		u8 match[9] = {W1_MATCH_ROM, };
-		memcpy(&match[1], (u8 *)&sl->reg_num, 8);
+		u64 rn = le64_to_cpu(*((u64*)&sl->reg_num));
+
+		memcpy(&match[1], &rn, 8);
 		w1_write_block(sl->master, match, 9);
 	}
 	return 0;