Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "For 3.14, the I2C subsystem has the following to offer:

   - new drivers for Renesas RIIC and RobotFuzz OSIF
   - driver cleanups & improvements & bugfixes

  Pretty standard stuff this time, I'd say.  There is more complex stuff
  coming up, but I didn't have the bandwidth between the years to pull
  it in for this release.  Sadly"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (26 commits)
  i2c: s3c2410: fix quirk usage for 64-bit
  i2c: pnx: Use devm_*() functions
  i2c: at91: add a new compatibility string for the at91sam9261
  i2c-ismt: support I2C_SMBUS_I2C_BLOCK_DATA transaction type
  i2c: Add bus driver for for OSIF USB i2c device.
  i2c: i2c-tiny-usb: Remove RobotFuzz USB vendor:product ID
  i2c: designware: remove HAVE_CLK build dependecy
  Documentation: i2c: Remove obsolete example
  i2c: nomadik: remove platform data header
  i2c: nomadik: auto-calculate slave setup time
  i2c: viperboard: remove superfluous assignment
  i2c: xilinx: Use devm_* functions
  i2c: xilinx: Do not enable irq before irq handler
  i2c: xilinx: Fix i2c checkpatch warnings
  i2c: at91: document clock properties
  i2c: isch: Use devm_request_region()
  i2c: viperboard: Use devm_kzalloc() functions
  i2c: imx: propagate irq error code in probe
  i2c: s3c2410: dont need CPU_FREQ transitions for exynos series
  i2c: s3c2410: Add polling mode support
  ...

16 files changed, 881 insertions, 179 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 3b26129f605..6bcdea5856a 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -412,7 +412,6 @@ config I2C_DESIGNWARE_CORE
 
 config I2C_DESIGNWARE_PLATFORM
 	tristate "Synopsys DesignWare Platform"
-	depends on HAVE_CLK
 	select I2C_DESIGNWARE_CORE
 	help
 	  If you say yes to this option, support will be included for the
@@ -648,6 +647,16 @@ config I2C_PXA_SLAVE
 	  is necessary for systems where the PXA may be a target on the
 	  I2C bus.
 
+config I2C_RIIC
+	tristate "Renesas RIIC adapter"
+	depends on ARCH_SHMOBILE || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  Renesas RIIC I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-riic.
+
 config HAVE_S3C2410_I2C
 	bool
 	help
@@ -683,7 +692,7 @@ config I2C_SH7760
 
 config I2C_SH_MOBILE
 	tristate "SuperH Mobile I2C Controller"
-	depends on SUPERH || ARM || COMPILE_TEST
+	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Renesas SH-Mobile processor.
@@ -796,7 +805,7 @@ config I2C_XLR
 
 config I2C_RCAR
 	tristate "Renesas R-Car I2C Controller"
-	depends on ARM || COMPILE_TEST
+	depends on ARCH_SHMOBILE || COMPILE_TEST
 	help
 	  If you say yes to this option, support will be included for the
 	  R-Car I2C controller.
@@ -865,6 +874,16 @@ config I2C_PARPORT_LIGHT
 	  This support is also available as a module.  If so, the module
 	  will be called i2c-parport-light.
 
+config I2C_ROBOTFUZZ_OSIF
+	tristate "RobotFuzz Open Source InterFace USB adapter"
+	depends on USB
+	help
+	  If you say yes to this option, support will be included for the
+	  RobotFuzz Open Source InterFace USB to I2C interface.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-osif.
+
 config I2C_TAOS_EVM
 	tristate "TAOS evaluation module"
 	depends on TTY
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index c73eb0ea788..a08931fe73e 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
 obj-$(CONFIG_I2C_PUV3)		+= i2c-puv3.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
 obj-$(CONFIG_I2C_PXA_PCI)	+= i2c-pxa-pci.o
+obj-$(CONFIG_I2C_RIIC)		+= i2c-riic.o
 obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
 obj-$(CONFIG_I2C_S6000)		+= i2c-s6000.o
 obj-$(CONFIG_I2C_SH7760)	+= i2c-sh7760.o
@@ -83,6 +84,7 @@ obj-$(CONFIG_I2C_RCAR)		+= i2c-rcar.o
 obj-$(CONFIG_I2C_DIOLAN_U2C)	+= i2c-diolan-u2c.o
 obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
 obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
+obj-$(CONFIG_I2C_ROBOTFUZZ_OSIF)	+= i2c-robotfuzz-osif.o
 obj-$(CONFIG_I2C_TAOS_EVM)	+= i2c-taos-evm.o
 obj-$(CONFIG_I2C_TINY_USB)	+= i2c-tiny-usb.o
 obj-$(CONFIG_I2C_VIPERBOARD)	+= i2c-viperboard.o
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 8edba9de76d..843d01268ae 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -589,6 +589,9 @@ static const struct of_device_id atmel_twi_dt_ids[] = {
 		.compatible = "atmel,at91sam9260-i2c",
 		.data = &at91sam9260_config,
 	} , {
+		.compatible = "atmel,at91sam9261-i2c",
+		.data = &at91sam9261_config,
+	} , {
 		.compatible = "atmel,at91sam9g20-i2c",
 		.data = &at91sam9g20_config,
 	} , {
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index e89e3e2145e..14c4b30d4cc 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -26,7 +26,6 @@
  *
  */
 #include <linux/export.h>
-#include <linux/clk.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index d0cfbb4cb96..db895fb22e6 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -607,7 +607,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "can't get irq number\n");
-		return -ENOENT;
+		return irq;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index 8c38aaa7417..af213045ab7 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -275,7 +275,8 @@ static int smbus_sch_probe(struct platform_device *dev)
 	if (!res)
 		return -EBUSY;
 
-	if (!request_region(res->start, resource_size(res), dev->name)) {
+	if (!devm_request_region(&dev->dev, res->start, resource_size(res),
+				 dev->name)) {
 		dev_err(&dev->dev, "SMBus region 0x%x already in use!\n",
 			sch_smba);
 		return -EBUSY;
@@ -294,7 +295,6 @@ static int smbus_sch_probe(struct platform_device *dev)
 	retval = i2c_add_adapter(&sch_adapter);
 	if (retval) {
 		dev_err(&dev->dev, "Couldn't register adapter!\n");
-		release_region(res->start, resource_size(res));
 		sch_smba = 0;
 	}
 
@@ -303,11 +303,8 @@ static int smbus_sch_probe(struct platform_device *dev)
 
 static int smbus_sch_remove(struct platform_device *pdev)
 {
-	struct resource *res;
 	if (sch_smba) {
 		i2c_del_adapter(&sch_adapter);
-		res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-		release_region(res->start, resource_size(res));
 		sch_smba = 0;
 	}
 
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 0043ede234c..bb132ea7d2b 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -344,6 +344,7 @@ static int ismt_process_desc(const struct ismt_desc *desc,
 			data->word = dma_buffer[0] | (dma_buffer[1] << 8);
 			break;
 		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_I2C_BLOCK_DATA:
 			memcpy(&data->block[1], dma_buffer, desc->rxbytes);
 			data->block[0] = desc->rxbytes;
 			break;
@@ -509,6 +510,41 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
 		}
 		break;
 
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		/* Make sure the length is valid */
+		if (data->block[0] < 1)
+			data->block[0] = 1;
+
+		if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+			data->block[0] = I2C_SMBUS_BLOCK_MAX;
+
+		if (read_write == I2C_SMBUS_WRITE) {
+			/* i2c Block Write */
+			dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA:  WRITE\n");
+			dma_size = data->block[0] + 1;
+			dma_direction = DMA_TO_DEVICE;
+			desc->wr_len_cmd = dma_size;
+			desc->control |= ISMT_DESC_I2C;
+			priv->dma_buffer[0] = command;
+			memcpy(&priv->dma_buffer[1], &data->block[1], dma_size);
+		} else {
+			/* i2c Block Read */
+			dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA:  READ\n");
+			dma_size = data->block[0];
+			dma_direction = DMA_FROM_DEVICE;
+			desc->rd_len = dma_size;
+			desc->wr_len_cmd = command;
+			desc->control |= (ISMT_DESC_I2C | ISMT_DESC_CWRL);
+			/*
+			 * Per the "Table 15-15. I2C Commands",
+			 * in the External Design Specification (EDS),
+			 * (Document Number: 508084, Revision: 2.0),
+			 * the _rw bit must be 0
+			 */
+			desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, 0);
+		}
+		break;
+
 	default:
 		dev_err(dev, "Unsupported transaction %d\n",
 			size);
@@ -582,6 +618,7 @@ static u32 ismt_func(struct i2c_adapter *adap)
 	       I2C_FUNC_SMBUS_WORD_DATA		|
 	       I2C_FUNC_SMBUS_PROC_CALL		|
 	       I2C_FUNC_SMBUS_BLOCK_DATA	|
+	       I2C_FUNC_SMBUS_I2C_BLOCK		|
 	       I2C_FUNC_SMBUS_PEC;
 }
 
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 8bf9ac01301..4443613514e 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -22,7 +22,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/pm_runtime.h>
-#include <linux/platform_data/i2c-nomadik.h>
 #include <linux/of.h>
 #include <linux/pinctrl/consumer.h>
 
@@ -104,6 +103,29 @@
 /* maximum threshold value */
 #define MAX_I2C_FIFO_THRESHOLD	15
 
+enum i2c_freq_mode {
+	I2C_FREQ_MODE_STANDARD,		/* up to 100 Kb/s */
+	I2C_FREQ_MODE_FAST,		/* up to 400 Kb/s */
+	I2C_FREQ_MODE_HIGH_SPEED,	/* up to 3.4 Mb/s */
+	I2C_FREQ_MODE_FAST_PLUS,	/* up to 1 Mb/s */
+};
+
+/**
+ * struct nmk_i2c_controller - client specific controller configuration
+ * @clk_freq:	clock frequency for the operation mode
+ * @tft:	Tx FIFO Threshold in bytes
+ * @rft:	Rx FIFO Threshold in bytes
+ * @timeout	Slave response timeout(ms)
+ * @sm:		speed mode
+ */
+struct nmk_i2c_controller {
+	u32             clk_freq;
+	unsigned char	tft;
+	unsigned char	rft;
+	int timeout;
+	enum i2c_freq_mode	sm;
+};
+
 /**
  * struct i2c_vendor_data - per-vendor variations
  * @has_mtdws: variant has the MTDWS bit
@@ -340,6 +362,8 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 {
 	u32 brcr1, brcr2;
 	u32 i2c_clk, div;
+	u32 ns;
+	u16 slsu;
 
 	writel(0x0, dev->virtbase + I2C_CR);
 	writel(0x0, dev->virtbase + I2C_HSMCR);
@@ -347,18 +371,38 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	writel(0x0, dev->virtbase + I2C_RFTR);
 	writel(0x0, dev->virtbase + I2C_DMAR);
 
+	i2c_clk = clk_get_rate(dev->clk);
+
 	/*
 	 * set the slsu:
 	 *
 	 * slsu defines the data setup time after SCL clock
-	 * stretching in terms of i2c clk cycles. The
-	 * needed setup time for the three modes are 250ns,
-	 * 100ns, 10ns respectively thus leading to the values
-	 * of 14, 6, 2 for a 48 MHz i2c clk.
+	 * stretching in terms of i2c clk cycles + 1 (zero means
+	 * "wait one cycle"), the needed setup time for the three
+	 * modes are 250ns, 100ns, 10ns respectively.
+	 *
+	 * As the time for one cycle T in nanoseconds is
+	 * T = (1/f) * 1000000000 =>
+	 * slsu = cycles / (1000000000 / f) + 1
 	 */
-	writel(dev->cfg.slsu << 16, dev->virtbase + I2C_SCR);
+	ns = DIV_ROUND_UP_ULL(1000000000ULL, i2c_clk);
+	switch (dev->cfg.sm) {
+	case I2C_FREQ_MODE_FAST:
+	case I2C_FREQ_MODE_FAST_PLUS:
+		slsu = DIV_ROUND_UP(100, ns); /* Fast */
+		break;
+	case I2C_FREQ_MODE_HIGH_SPEED:
+		slsu = DIV_ROUND_UP(10, ns); /* High */
+		break;
+	case I2C_FREQ_MODE_STANDARD:
+	default:
+		slsu = DIV_ROUND_UP(250, ns); /* Standard */
+		break;
+	}
+	slsu += 1;
 
-	i2c_clk = clk_get_rate(dev->clk);
+	dev_dbg(&dev->adev->dev, "calculated SLSU = %04x\n", slsu);
+	writel(slsu << 16, dev->virtbase + I2C_SCR);
 
 	/*
 	 * The spec says, in case of std. mode the divider is
@@ -915,11 +959,6 @@ static const struct i2c_algorithm nmk_i2c_algo = {
 };
 
 static struct nmk_i2c_controller u8500_i2c = {
-	/*
-	 * Slave data setup time; 250ns, 100ns, and 10ns, which
-	 * is 14, 6 and 2 respectively for a 48Mhz i2c clock.
-	 */
-	.slsu           = 0xe,
 	.tft            = 1,      /* Tx FIFO threshold */
 	.rft            = 8,      /* Rx FIFO threshold */
 	.clk_freq       = 400000, /* fast mode operation */
@@ -1027,7 +1066,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 
 	/* fetch the controller configuration from machine */
 	dev->cfg.clk_freq = pdata->clk_freq;
-	dev->cfg.slsu	= pdata->slsu;
 	dev->cfg.tft	= pdata->tft;
 	dev->cfg.rft	= pdata->rft;
 	dev->cfg.sm	= pdata->sm;
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index c9a352f0a9a..dc7ff829ad7 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -628,11 +628,9 @@ static int i2c_pnx_probe(struct platform_device *pdev)
 	struct resource *res;
 	u32 speed = I2C_PNX_SPEED_KHZ_DEFAULT * 1000;
 
-	alg_data = kzalloc(sizeof(*alg_data), GFP_KERNEL);
-	if (!alg_data) {
-		ret = -ENOMEM;
-		goto err_kzalloc;
-	}
+	alg_data = devm_kzalloc(&pdev->dev, sizeof(*alg_data), GFP_KERNEL);
+	if (!alg_data)
+		return -ENOMEM;
 
 	platform_set_drvdata(pdev, alg_data);
 
@@ -657,11 +655,9 @@ static int i2c_pnx_probe(struct platform_device *pdev)
 		 */
 	}
 #endif
-	alg_data->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(alg_data->clk)) {
-		ret = PTR_ERR(alg_data->clk);
-		goto out_drvdata;
-	}
+	alg_data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(alg_data->clk))
+		return PTR_ERR(alg_data->clk);
 
 	init_timer(&alg_data->mif.timer);
 	alg_data->mif.timer.function = i2c_pnx_timeout;
@@ -672,31 +668,13 @@ static int i2c_pnx_probe(struct platform_device *pdev)
 
 	/* Register I/O resource */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Unable to get mem resource.\n");
-		ret = -EBUSY;
-		goto out_clkget;
-	}
-	if (!request_mem_region(res->start, I2C_PNX_REGION_SIZE,
-				pdev->name)) {
-		dev_err(&pdev->dev,
-		       "I/O region 0x%08x for I2C already in use.\n",
-		       res->start);
-		ret = -ENOMEM;
-		goto out_clkget;
-	}
-
-	alg_data->base = res->start;
-	alg_data->ioaddr = ioremap(res->start, I2C_PNX_REGION_SIZE);
-	if (!alg_data->ioaddr) {
-		dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n");
-		ret = -ENOMEM;
-		goto out_release;
-	}
+	alg_data->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(alg_data->ioaddr))
+		return PTR_ERR(alg_data->ioaddr);
 
 	ret = clk_enable(alg_data->clk);
 	if (ret)
-		goto out_unmap;
+		return ret;
 
 	freq = clk_get_rate(alg_data->clk);
 
@@ -730,8 +708,8 @@ static int i2c_pnx_probe(struct platform_device *pdev)
 		ret = alg_data->irq;
 		goto out_clock;
 	}
-	ret = request_irq(alg_data->irq, i2c_pnx_interrupt,
-			0, pdev->name, alg_data);
+	ret = devm_request_irq(&pdev->dev, alg_data->irq, i2c_pnx_interrupt,
+			       0, pdev->name, alg_data);
 	if (ret)
 		goto out_clock;
 
@@ -739,7 +717,7 @@ static int i2c_pnx_probe(struct platform_device *pdev)
 	ret = i2c_add_numbered_adapter(&alg_data->adapter);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "I2C: Failed to add bus\n");
-		goto out_irq;
+		goto out_clock;
 	}
 
 	dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
@@ -747,19 +725,8 @@ static int i2c_pnx_probe(struct platform_device *pdev)
 
 	return 0;
 
-out_irq:
-	free_irq(alg_data->irq, alg_data);
 out_clock:
 	clk_disable(alg_data->clk);
-out_unmap:
-	iounmap(alg_data->ioaddr);
-out_release:
-	release_mem_region(res->start, I2C_PNX_REGION_SIZE);
-out_clkget:
-	clk_put(alg_data->clk);
-out_drvdata:
-	kfree(alg_data);
-err_kzalloc:
 	return ret;
 }
 
@@ -767,13 +734,8 @@ static int i2c_pnx_remove(struct platform_device *pdev)
 {
 	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
 
-	free_irq(alg_data->irq, alg_data);
 	i2c_del_adapter(&alg_data->adapter);
 	clk_disable(alg_data->clk);
-	iounmap(alg_data->ioaddr);
-	release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
-	clk_put(alg_data->clk);
-	kfree(alg_data);
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
new file mode 100644
index 00000000000..9e1f8bacfb3
--- /dev/null
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -0,0 +1,427 @@
+/*
+ * Renesas RIIC driver
+ *
+ * Copyright (C) 2013 Wolfram Sang <wsa@sang-engineering.com>
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * This i2c core has a lot of interrupts, namely 8. We use their chaining as
+ * some kind of state machine.
+ *
+ * 1) The main xfer routine kicks off a transmission by putting the start bit
+ * (or repeated start) on the bus and enabling the transmit interrupt (TIE)
+ * since we need to send the slave address + RW bit in every case.
+ *
+ * 2) TIE sends slave address + RW bit and selects how to continue.
+ *
+ * 3a) Write case: We keep utilizing TIE as long as we have data to send. If we
+ * are done, we switch over to the transmission done interrupt (TEIE) and mark
+ * the message as completed (includes sending STOP) there.
+ *
+ * 3b) Read case: We switch over to receive interrupt (RIE). One dummy read is
+ * needed to start clocking, then we keep receiving until we are done. Note
+ * that we use the RDRFS mode all the time, i.e. we ACK/NACK every byte by
+ * writing to the ACKBT bit. I tried using the RDRFS mode only at the end of a
+ * message to create the final NACK as sketched in the datasheet. This caused
+ * some subtle races (when byte n was processed and byte n+1 was already
+ * waiting), though, and I started with the safe approach.
+ *
+ * 4) If we got a NACK somewhere, we flag the error and stop the transmission
+ * via NAKIE.
+ *
+ * Also check the comments in the interrupt routines for some gory details.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define RIIC_ICCR1	0x00
+#define RIIC_ICCR2	0x04
+#define RIIC_ICMR1	0x08
+#define RIIC_ICMR3	0x10
+#define RIIC_ICSER	0x18
+#define RIIC_ICIER	0x1c
+#define RIIC_ICSR2	0x24
+#define RIIC_ICBRL	0x34
+#define RIIC_ICBRH	0x38
+#define RIIC_ICDRT	0x3c
+#define RIIC_ICDRR	0x40
+
+#define ICCR1_ICE	0x80
+#define ICCR1_IICRST	0x40
+#define ICCR1_SOWP	0x10
+
+#define ICCR2_BBSY	0x80
+#define ICCR2_SP	0x08
+#define ICCR2_RS	0x04
+#define ICCR2_ST	0x02
+
+#define ICMR1_CKS_MASK	0x70
+#define ICMR1_BCWP	0x08
+#define ICMR1_CKS(_x)	((((_x) << 4) & ICMR1_CKS_MASK) | ICMR1_BCWP)
+
+#define ICMR3_RDRFS	0x20
+#define ICMR3_ACKWP	0x10
+#define ICMR3_ACKBT	0x08
+
+#define ICIER_TIE	0x80
+#define ICIER_TEIE	0x40
+#define ICIER_RIE	0x20
+#define ICIER_NAKIE	0x10
+
+#define ICSR2_NACKF	0x10
+
+/* ICBRx (@ PCLK 33MHz) */
+#define ICBR_RESERVED	0xe0 /* Should be 1 on writes */
+#define ICBRL_SP100K	(19 | ICBR_RESERVED)
+#define ICBRH_SP100K	(16 | ICBR_RESERVED)
+#define ICBRL_SP400K	(21 | ICBR_RESERVED)
+#define ICBRH_SP400K	(9 | ICBR_RESERVED)
+
+#define RIIC_INIT_MSG	-1
+
+struct riic_dev {
+	void __iomem *base;
+	u8 *buf;
+	struct i2c_msg *msg;
+	int bytes_left;
+	int err;
+	int is_last;
+	struct completion msg_done;
+	struct i2c_adapter adapter;
+	struct clk *clk;
+};
+
+struct riic_irq_desc {
+	int res_num;
+	irq_handler_t isr;
+	char *name;
+};
+
+static inline void riic_clear_set_bit(struct riic_dev *riic, u8 clear, u8 set, u8 reg)
+{
+	writeb((readb(riic->base + reg) & ~clear) | set, riic->base + reg);
+}
+
+static int riic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct riic_dev *riic = i2c_get_adapdata(adap);
+	unsigned long time_left;
+	int i, ret;
+	u8 start_bit;
+
+	ret = clk_prepare_enable(riic->clk);
+	if (ret)
+		return ret;
+
+	if (readb(riic->base + RIIC_ICCR2) & ICCR2_BBSY) {
+		riic->err = -EBUSY;
+		goto out;
+	}
+
+	reinit_completion(&riic->msg_done);
+	riic->err = 0;
+
+	writeb(0, riic->base + RIIC_ICSR2);
+
+	for (i = 0, start_bit = ICCR2_ST; i < num; i++) {
+		riic->bytes_left = RIIC_INIT_MSG;
+		riic->buf = msgs[i].buf;
+		riic->msg = &msgs[i];
+		riic->is_last = (i == num - 1);
+
+		writeb(ICIER_NAKIE | ICIER_TIE, riic->base + RIIC_ICIER);
+
+		writeb(start_bit, riic->base + RIIC_ICCR2);
+
+		time_left = wait_for_completion_timeout(&riic->msg_done, riic->adapter.timeout);
+		if (time_left == 0)
+			riic->err = -ETIMEDOUT;
+
+		if (riic->err)
+			break;
+
+		start_bit = ICCR2_RS;
+	}
+
+ out:
+	clk_disable_unprepare(riic->clk);
+
+	return riic->err ?: num;
+}
+
+static irqreturn_t riic_tdre_isr(int irq, void *data)
+{
+	struct riic_dev *riic = data;
+	u8 val;
+
+	if (!riic->bytes_left)
+		return IRQ_NONE;
+
+	if (riic->bytes_left == RIIC_INIT_MSG) {
+		val = !!(riic->msg->flags & I2C_M_RD);
+		if (val)
+			/* On read, switch over to receive interrupt */
+			riic_clear_set_bit(riic, ICIER_TIE, ICIER_RIE, RIIC_ICIER);
+		else
+			/* On write, initialize length */
+			riic->bytes_left = riic->msg->len;
+
+		val |= (riic->msg->addr << 1);
+	} else {
+		val = *riic->buf;
+		riic->buf++;
+		riic->bytes_left--;
+	}
+
+	/*
+	 * Switch to transmission ended interrupt when done. Do check here
+	 * after bytes_left was initialized to support SMBUS_QUICK (new msg has
+	 * 0 length then)
+	 */
+	if (riic->bytes_left == 0)
+		riic_clear_set_bit(riic, ICIER_TIE, ICIER_TEIE, RIIC_ICIER);
+
+	/*
+	 * This acks the TIE interrupt. We get another TIE immediately if our
+	 * value could be moved to the shadow shift register right away. So
+	 * this must be after updates to ICIER (where we want to disable TIE)!
+	 */
+	writeb(val, riic->base + RIIC_ICDRT);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t riic_tend_isr(int irq, void *data)
+{
+	struct riic_dev *riic = data;
+
+	if (readb(riic->base + RIIC_ICSR2) & ICSR2_NACKF) {
+		/* We got a NACKIE */
+		readb(riic->base + RIIC_ICDRR);	/* dummy read */
+		riic->err = -ENXIO;
+	} else if (riic->bytes_left) {
+		return IRQ_NONE;
+	}
+
+	if (riic->is_last || riic->err)
+		writeb(ICCR2_SP, riic->base + RIIC_ICCR2);
+
+	writeb(0, riic->base + RIIC_ICIER);
+	complete(&riic->msg_done);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t riic_rdrf_isr(int irq, void *data)
+{
+	struct riic_dev *riic = data;
+
+	if (!riic->bytes_left)
+		return IRQ_NONE;
+
+	if (riic->bytes_left == RIIC_INIT_MSG) {
+		riic->bytes_left = riic->msg->len;
+		readb(riic->base + RIIC_ICDRR);	/* dummy read */
+		return IRQ_HANDLED;
+	}
+
+	if (riic->bytes_left == 1) {
+		/* STOP must come before we set ACKBT! */
+		if (riic->is_last)
+			writeb(ICCR2_SP, riic->base + RIIC_ICCR2);
+
+		riic_clear_set_bit(riic, 0, ICMR3_ACKBT, RIIC_ICMR3);
+
+		writeb(0, riic->base + RIIC_ICIER);
+		complete(&riic->msg_done);
+	} else {
+		riic_clear_set_bit(riic, ICMR3_ACKBT, 0, RIIC_ICMR3);
+	}
+
+	/* Reading acks the RIE interrupt */
+	*riic->buf = readb(riic->base + RIIC_ICDRR);
+	riic->buf++;
+	riic->bytes_left--;
+
+	return IRQ_HANDLED;
+}
+
+static u32 riic_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm riic_algo = {
+	.master_xfer	= riic_xfer,
+	.functionality	= riic_func,
+};
+
+static int riic_init_hw(struct riic_dev *riic, u32 spd)
+{
+	int ret;
+	unsigned long rate;
+
+	ret = clk_prepare_enable(riic->clk);
+	if (ret)
+		return ret;
+
+	/*
+	 * TODO: Implement formula to calculate the timing values depending on
+	 * variable parent clock rate and arbitrary bus speed
+	 */
+	rate = clk_get_rate(riic->clk);
+	if (rate != 33325000) {
+		dev_err(&riic->adapter.dev,
+			"invalid parent clk (%lu). Must be 33325000Hz\n", rate);
+		clk_disable_unprepare(riic->clk);
+		return -EINVAL;
+	}
+
+	/* Changing the order of accessing IICRST and ICE may break things! */
+	writeb(ICCR1_IICRST | ICCR1_SOWP, riic->base + RIIC_ICCR1);
+	riic_clear_set_bit(riic, 0, ICCR1_ICE, RIIC_ICCR1);
+
+	switch (spd) {
+	case 100000:
+		writeb(ICMR1_CKS(3), riic->base + RIIC_ICMR1);
+		writeb(ICBRH_SP100K, riic->base + RIIC_ICBRH);
+		writeb(ICBRL_SP100K, riic->base + RIIC_ICBRL);
+		break;
+	case 400000:
+		writeb(ICMR1_CKS(1), riic->base + RIIC_ICMR1);
+		writeb(ICBRH_SP400K, riic->base + RIIC_ICBRH);
+		writeb(ICBRL_SP400K, riic->base + RIIC_ICBRL);
+		break;
+	default:
+		dev_err(&riic->adapter.dev,
+			"unsupported bus speed (%dHz). Use 100000 or 400000\n", spd);
+		clk_disable_unprepare(riic->clk);
+		return -EINVAL;
+	}
+
+	writeb(0, riic->base + RIIC_ICSER);
+	writeb(ICMR3_ACKWP | ICMR3_RDRFS, riic->base + RIIC_ICMR3);
+
+	riic_clear_set_bit(riic, ICCR1_IICRST, 0, RIIC_ICCR1);
+
+	clk_disable_unprepare(riic->clk);
+
+	return 0;
+}
+
+static struct riic_irq_desc riic_irqs[] = {
+	{ .res_num = 0, .isr = riic_tend_isr, .name = "riic-tend" },
+	{ .res_num = 1, .isr = riic_rdrf_isr, .name = "riic-rdrf" },
+	{ .res_num = 2, .isr = riic_tdre_isr, .name = "riic-tdre" },
+	{ .res_num = 5, .isr = riic_tend_isr, .name = "riic-nack" },
+};
+
+static int riic_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct riic_dev *riic;
+	struct i2c_adapter *adap;
+	struct resource *res;
+	u32 bus_rate = 0;
+	int i, ret;
+
+	riic = devm_kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL);
+	if (!riic)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	riic->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(riic->base))
+		return PTR_ERR(riic->base);
+
+	riic->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(riic->clk)) {
+		dev_err(&pdev->dev, "missing controller clock");
+		return PTR_ERR(riic->clk);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(riic_irqs); i++) {
+		res = platform_get_resource(pdev, IORESOURCE_IRQ, riic_irqs[i].res_num);
+		if (!res)
+			return -ENODEV;
+
+		ret = devm_request_irq(&pdev->dev, res->start, riic_irqs[i].isr,
+					0, riic_irqs[i].name, riic);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to request irq %s\n", riic_irqs[i].name);
+			return ret;
+		}
+	}
+
+	adap = &riic->adapter;
+	i2c_set_adapdata(adap, riic);
+	strlcpy(adap->name, "Renesas RIIC adapter", sizeof(adap->name));
+	adap->owner = THIS_MODULE;
+	adap->algo = &riic_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	init_completion(&riic->msg_done);
+
+	of_property_read_u32(np, "clock-frequency", &bus_rate);
+	ret = riic_init_hw(riic, bus_rate);
+	if (ret)
+		return ret;
+
+
+	ret = i2c_add_adapter(adap);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add adapter\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, riic);
+
+	dev_info(&pdev->dev, "registered with %dHz bus speed\n", bus_rate);
+	return 0;
+}
+
+static int riic_i2c_remove(struct platform_device *pdev)
+{
+	struct riic_dev *riic = platform_get_drvdata(pdev);
+
+	writeb(0, riic->base + RIIC_ICIER);
+	i2c_del_adapter(&riic->adapter);
+
+	return 0;
+}
+
+static struct of_device_id riic_i2c_dt_ids[] = {
+	{ .compatible = "renesas,riic-rz" },
+	{ /* Sentinel */ },
+};
+
+static struct platform_driver riic_i2c_driver = {
+	.probe		= riic_i2c_probe,
+	.remove		= riic_i2c_remove,
+	.driver		= {
+		.name	= "i2c-riic",
+		.owner	= THIS_MODULE,
+		.of_match_table = riic_i2c_dt_ids,
+	},
+};
+
+module_platform_driver(riic_i2c_driver);
+
+MODULE_DESCRIPTION("Renesas RIIC adapter");
+MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, riic_i2c_dt_ids);
diff --git a/drivers/i2c/busses/i2c-robotfuzz-osif.c b/drivers/i2c/busses/i2c-robotfuzz-osif.c
new file mode 100644
index 00000000000..ced9c6a308d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-robotfuzz-osif.c
@@ -0,0 +1,202 @@
+/*
+ * Driver for RobotFuzz OSIF
+ *
+ * Copyright (c) 2013 Andrew Lunn <andrew@lunn.ch>
+ * Copyright (c) 2007 Barry Carter <Barry.Carter@robotfuzz.com>
+ *
+ * Based on the i2c-tiny-usb by
+ *
+ * Copyright (C) 2006 Til Harbaum (Till@Harbaum.org)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#define OSIFI2C_READ		20
+#define OSIFI2C_WRITE		21
+#define OSIFI2C_STOP		22
+#define OSIFI2C_STATUS		23
+#define OSIFI2C_SET_BIT_RATE	24
+
+#define STATUS_ADDRESS_ACK	0
+#define STATUS_ADDRESS_NAK	2
+
+struct osif_priv {
+	struct usb_device *usb_dev;
+	struct usb_interface *interface;
+	struct i2c_adapter adapter;
+	unsigned char status;
+};
+
+static int osif_usb_read(struct i2c_adapter *adapter, int cmd,
+			 int value, int index, void *data, int len)
+{
+	struct osif_priv *priv = adapter->algo_data;
+
+	return usb_control_msg(priv->usb_dev, usb_rcvctrlpipe(priv->usb_dev, 0),
+			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
+			       USB_DIR_IN, value, index, data, len, 2000);
+}
+
+static int osif_usb_write(struct i2c_adapter *adapter, int cmd,
+			  int value, int index, void *data, int len)
+{
+
+	struct osif_priv *priv = adapter->algo_data;
+
+	return usb_control_msg(priv->usb_dev, usb_sndctrlpipe(priv->usb_dev, 0),
+			       cmd, USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+			       value, index, data, len, 2000);
+}
+
+static int osif_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
+			 int num)
+{
+	struct osif_priv *priv = adapter->algo_data;
+	struct i2c_msg *pmsg;
+	int ret = 0;
+	int i, cmd;
+
+	for (i = 0; ret >= 0 && i < num; i++) {
+		pmsg = &msgs[i];
+
+		if (pmsg->flags & I2C_M_RD) {
+			cmd = OSIFI2C_READ;
+
+			ret = osif_usb_read(adapter, cmd, pmsg->flags,
+					    pmsg->addr, pmsg->buf,
+					    pmsg->len);
+			if (ret != pmsg->len) {
+				dev_err(&adapter->dev, "failure reading data\n");
+				return -EREMOTEIO;
+			}
+		} else {
+			cmd = OSIFI2C_WRITE;
+
+			ret = osif_usb_write(adapter, cmd, pmsg->flags,
+					     pmsg->addr, pmsg->buf, pmsg->len);
+			if (ret != pmsg->len) {
+				dev_err(&adapter->dev, "failure writing data\n");
+				return -EREMOTEIO;
+			}
+		}
+
+		ret = osif_usb_read(adapter, OSIFI2C_STOP, 0, 0, NULL, 0);
+		if (ret) {
+			dev_err(&adapter->dev, "failure sending STOP\n");
+			return -EREMOTEIO;
+		}
+
+		/* read status */
+		ret = osif_usb_read(adapter, OSIFI2C_STATUS, 0, 0,
+				    &priv->status, 1);
+		if (ret != 1) {
+			dev_err(&adapter->dev, "failure reading status\n");
+			return -EREMOTEIO;
+		}
+
+		if (priv->status != STATUS_ADDRESS_ACK) {
+			dev_dbg(&adapter->dev, "status = %d\n", priv->status);
+			return -EREMOTEIO;
+		}
+	}
+
+	return i;
+}
+
+static u32 osif_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm osif_algorithm = {
+	.master_xfer	= osif_xfer,
+	.functionality	= osif_func,
+};
+
+#define USB_OSIF_VENDOR_ID	0x1964
+#define USB_OSIF_PRODUCT_ID	0x0001
+
+static struct usb_device_id osif_table[] = {
+	{ USB_DEVICE(USB_OSIF_VENDOR_ID, USB_OSIF_PRODUCT_ID) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, osif_table);
+
+static int osif_probe(struct usb_interface *interface,
+			     const struct usb_device_id *id)
+{
+	int ret;
+	struct osif_priv *priv;
+	u16 version;
+
+	priv = devm_kzalloc(&interface->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+	priv->interface = interface;
+
+	usb_set_intfdata(interface, priv);
+
+	priv->adapter.owner = THIS_MODULE;
+	priv->adapter.class = I2C_CLASS_HWMON;
+	priv->adapter.algo = &osif_algorithm;
+	priv->adapter.algo_data = priv;
+	snprintf(priv->adapter.name, sizeof(priv->adapter.name),
+		 "OSIF at bus %03d device %03d",
+		 priv->usb_dev->bus->busnum, priv->usb_dev->devnum);
+
+	/*
+	 * Set bus frequency. The frequency is:
+	 * 120,000,000 / ( 16 + 2 * div * 4^prescale).
+	 * Using dev = 52, prescale = 0 give 100KHz */
+	ret = osif_usb_read(&priv->adapter, OSIFI2C_SET_BIT_RATE, 52, 0,
+			    NULL, 0);
+	if (ret) {
+		dev_err(&interface->dev, "failure sending bit rate");
+		usb_put_dev(priv->usb_dev);
+		return ret;
+	}
+
+	i2c_add_adapter(&(priv->adapter));
+
+	version = le16_to_cpu(priv->usb_dev->descriptor.bcdDevice);
+	dev_info(&interface->dev,
+		 "version %x.%02x found at bus %03d address %03d",
+		 version >> 8, version & 0xff,
+		 priv->usb_dev->bus->busnum, priv->usb_dev->devnum);
+
+	return 0;
+}
+
+static void osif_disconnect(struct usb_interface *interface)
+{
+	struct osif_priv *priv = usb_get_intfdata(interface);
+
+	i2c_del_adapter(&(priv->adapter));
+	usb_set_intfdata(interface, NULL);
+	usb_put_dev(priv->usb_dev);
+}
+
+static struct usb_driver osif_driver = {
+	.name		= "RobotFuzz Open Source InterFace, OSIF",
+	.probe		= osif_probe,
+	.disconnect	= osif_disconnect,
+	.id_table	= osif_table,
+};
+
+module_usb_driver(osif_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_AUTHOR("Barry Carter <barry.carter@robotfuzz.com>");
+MODULE_DESCRIPTION("RobotFuzz OSIF driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index bf8fb94ebc5..684d21e71e4 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -86,6 +86,7 @@
 #define QUIRK_S3C2440		(1 << 0)
 #define QUIRK_HDMIPHY		(1 << 1)
 #define QUIRK_NO_GPIO		(1 << 2)
+#define QUIRK_POLL		(1 << 3)
 
 /* Max time to wait for bus to become idle after a xfer (in us) */
 #define S3C2410_IDLE_TIMEOUT	5000
@@ -101,7 +102,7 @@ enum s3c24xx_i2c_state {
 
 struct s3c24xx_i2c {
 	wait_queue_head_t	wait;
-	unsigned int            quirks;
+	kernel_ulong_t		quirks;
 	unsigned int		suspended:1;
 
 	struct i2c_msg		*msg;
@@ -123,7 +124,7 @@ struct s3c24xx_i2c {
 	struct s3c2410_platform_i2c	*pdata;
 	int			gpios[2];
 	struct pinctrl          *pctrl;
-#ifdef CONFIG_CPU_FREQ
+#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
 	struct notifier_block	freq_transition;
 #endif
 };
@@ -142,6 +143,8 @@ static struct platform_device_id s3c24xx_driver_ids[] = {
 };
 MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
 
+static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat);
+
 #ifdef CONFIG_OF
 static const struct of_device_id s3c24xx_i2c_match[] = {
 	{ .compatible = "samsung,s3c2410-i2c", .data = (void *)0 },
@@ -150,6 +153,8 @@ static const struct of_device_id s3c24xx_i2c_match[] = {
 	  .data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
 	{ .compatible = "samsung,exynos5440-i2c",
 	  .data = (void *)(QUIRK_S3C2440 | QUIRK_NO_GPIO) },
+	{ .compatible = "samsung,exynos5-sata-phy-i2c",
+	  .data = (void *)(QUIRK_S3C2440 | QUIRK_POLL | QUIRK_NO_GPIO) },
 	{},
 };
 MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
@@ -160,12 +165,12 @@ MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
  * Get controller type either from device tree or platform device variant.
 */
 
-static inline unsigned int s3c24xx_get_device_quirks(struct platform_device *pdev)
+static inline kernel_ulong_t s3c24xx_get_device_quirks(struct platform_device *pdev)
 {
 	if (pdev->dev.of_node) {
 		const struct of_device_id *match;
 		match = of_match_node(s3c24xx_i2c_match, pdev->dev.of_node);
-		return (unsigned int)match->data;
+		return (kernel_ulong_t)match->data;
 	}
 
 	return platform_get_device_id(pdev)->driver_data;
@@ -188,7 +193,8 @@ static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
 	if (ret)
 		i2c->msg_idx = ret;
 
-	wake_up(&i2c->wait);
+	if (!(i2c->quirks & QUIRK_POLL))
+		wake_up(&i2c->wait);
 }
 
 static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
@@ -225,6 +231,22 @@ static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
 	writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
 }
 
+static bool is_ack(struct s3c24xx_i2c *i2c)
+{
+	int tries;
+
+	for (tries = 50; tries; --tries) {
+		if (readl(i2c->regs + S3C2410_IICCON)
+			& S3C2410_IICCON_IRQPEND) {
+			if (!(readl(i2c->regs + S3C2410_IICSTAT)
+				& S3C2410_IICSTAT_LASTBIT))
+				return true;
+		}
+		usleep_range(1000, 2000);
+	}
+	dev_err(i2c->dev, "ack was not recieved\n");
+	return false;
+}
 
 /* s3c24xx_i2c_message_start
  *
@@ -269,6 +291,16 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
 
 	stat |= S3C2410_IICSTAT_START;
 	writel(stat, i2c->regs + S3C2410_IICSTAT);
+
+	if (i2c->quirks & QUIRK_POLL) {
+		while ((i2c->msg_num != 0) && is_ack(i2c)) {
+			i2c_s3c_irq_nextbyte(i2c, stat);
+			stat = readl(i2c->regs + S3C2410_IICSTAT);
+
+			if (stat & S3C2410_IICSTAT_ARBITR)
+				dev_err(i2c->dev, "deal with arbitration loss\n");
+		}
+	}
 }
 
 static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
@@ -676,6 +708,15 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 	s3c24xx_i2c_enable_irq(i2c);
 	s3c24xx_i2c_message_start(i2c, msgs);
 
+	if (i2c->quirks & QUIRK_POLL) {
+		ret = i2c->msg_idx;
+
+		if (ret != num)
+			dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
+
+		goto out;
+	}
+
 	timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
 
 	ret = i2c->msg_idx;
@@ -821,6 +862,9 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 	if (div1 == 512)
 		iiccon |= S3C2410_IICCON_TXDIV_512;
 
+	if (i2c->quirks & QUIRK_POLL)
+		iiccon |= S3C2410_IICCON_SCALE(2);
+
 	writel(iiccon, i2c->regs + S3C2410_IICCON);
 
 	if (i2c->quirks & QUIRK_S3C2440) {
@@ -843,7 +887,7 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 	return 0;
 }
 
-#ifdef CONFIG_CPU_FREQ
+#if defined(CONFIG_ARM_S3C24XX_CPUFREQ)
 
 #define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition)
 
@@ -1118,18 +1162,20 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	 * ensure no current IRQs pending
 	 */
 
-	i2c->irq = ret = platform_get_irq(pdev, 0);
-	if (ret <= 0) {
-		dev_err(&pdev->dev, "cannot find IRQ\n");
-		return ret;
-	}
+	if (!(i2c->quirks & QUIRK_POLL)) {
+		i2c->irq = ret = platform_get_irq(pdev, 0);
+		if (ret <= 0) {
+			dev_err(&pdev->dev, "cannot find IRQ\n");
+			return ret;
+		}
 
 	ret = devm_request_irq(&pdev->dev, i2c->irq, s3c24xx_i2c_irq, 0,
-			       dev_name(&pdev->dev), i2c);
+				dev_name(&pdev->dev), i2c);
 
-	if (ret != 0) {
-		dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
-		return ret;
+		if (ret != 0) {
+			dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
+			return ret;
+		}
 	}
 
 	ret = s3c24xx_i2c_register_cpufreq(i2c);
diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
index e7d3b755af3..0ed77eeff31 100644
--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -162,7 +162,6 @@ static const struct i2c_algorithm usb_algorithm = {
 static const struct usb_device_id i2c_tiny_usb_table[] = {
 	{ USB_DEVICE(0x0403, 0xc631) },   /* FTDI */
 	{ USB_DEVICE(0x1c40, 0x0534) },   /* EZPrototypes */
-	{ USB_DEVICE(0x1964, 0x0001) },   /* Robofuzz OSIF */
 	{ }                               /* Terminating entry */
 };
 
diff --git a/drivers/i2c/busses/i2c-viperboard.c b/drivers/i2c/busses/i2c-viperboard.c
index c68450cd8d5..7533fa34d73 100644
--- a/drivers/i2c/busses/i2c-viperboard.c
+++ b/drivers/i2c/busses/i2c-viperboard.c
@@ -118,8 +118,7 @@ static int vprbrd_i2c_addr(struct usb_device *usb_dev,
 static int vprbrd_i2c_read(struct vprbrd *vb, struct i2c_msg *msg)
 {
 	int ret;
-	u16 remain_len, bytes_xfer, len1, len2,
-		start = 0x0000;
+	u16 remain_len, len1, len2, start = 0x0000;
 	struct vprbrd_i2c_read_msg *rmsg =
 		(struct vprbrd_i2c_read_msg *)vb->buf;
 
@@ -166,7 +165,6 @@ static int vprbrd_i2c_read(struct vprbrd *vb, struct i2c_msg *msg)
 			rmsg->header.len3 = remain_len - 512;
 			rmsg->header.len4 = 0x00;
 			rmsg->header.len5 = 0x00;
-			bytes_xfer = remain_len;
 			remain_len = 0;
 		} else if (remain_len <= 1022) {
 			len1 = 512;
@@ -367,7 +365,7 @@ static int vprbrd_i2c_probe(struct platform_device *pdev)
 	int ret;
 	int pipe;
 
-	vb_i2c = kzalloc(sizeof(*vb_i2c), GFP_KERNEL);
+	vb_i2c = devm_kzalloc(&pdev->dev, sizeof(*vb_i2c), GFP_KERNEL);
 	if (vb_i2c == NULL)
 		return -ENOMEM;
 
@@ -394,14 +392,12 @@ static int vprbrd_i2c_probe(struct platform_device *pdev)
 	    if (ret != 1) {
 		dev_err(&pdev->dev,
 			"failure setting i2c_bus_freq to %d\n", i2c_bus_freq);
-		ret = -EIO;
-		goto error;
+		return -EIO;
 	    }
 	} else {
 		dev_err(&pdev->dev,
 			"invalid i2c_bus_freq setting:%d\n", i2c_bus_freq);
-		ret = -EIO;
-		goto error;
+		return -EIO;
 	}
 
 	vb_i2c->i2c.dev.parent = &pdev->dev;
@@ -412,10 +408,6 @@ static int vprbrd_i2c_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, vb_i2c);
 
 	return 0;
-
-error:
-	kfree(vb_i2c);
-	return ret;
 }
 
 static int vprbrd_i2c_remove(struct platform_device *pdev)
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index fc2716afdfd..6f9918f37b9 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -32,6 +32,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
@@ -69,7 +70,7 @@ struct xiic_i2c {
 	struct i2c_adapter	adap;
 	struct i2c_msg		*tx_msg;
 	spinlock_t		lock;
-	unsigned int 		tx_pos;
+	unsigned int		tx_pos;
 	unsigned int		nmsgs;
 	enum xilinx_i2c_state	state;
 	struct i2c_msg		*rx_msg;
@@ -272,8 +273,8 @@ static void xiic_read_rx(struct xiic_i2c *i2c)
 
 	bytes_in_fifo = xiic_getreg8(i2c, XIIC_RFO_REG_OFFSET) + 1;
 
-	dev_dbg(i2c->adap.dev.parent, "%s entry, bytes in fifo: %d, msg: %d"
-		", SR: 0x%x, CR: 0x%x\n",
+	dev_dbg(i2c->adap.dev.parent,
+		"%s entry, bytes in fifo: %d, msg: %d, SR: 0x%x, CR: 0x%x\n",
 		__func__, bytes_in_fifo, xiic_rx_space(i2c),
 		xiic_getreg8(i2c, XIIC_SR_REG_OFFSET),
 		xiic_getreg8(i2c, XIIC_CR_REG_OFFSET));
@@ -340,9 +341,10 @@ static void xiic_process(struct xiic_i2c *i2c)
 	ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
 	pend = isr & ier;
 
-	dev_dbg(i2c->adap.dev.parent, "%s entry, IER: 0x%x, ISR: 0x%x, "
-		"pend: 0x%x, SR: 0x%x, msg: %p, nmsgs: %d\n",
-		__func__, ier, isr, pend, xiic_getreg8(i2c, XIIC_SR_REG_OFFSET),
+	dev_dbg(i2c->adap.dev.parent, "%s: IER: 0x%x, ISR: 0x%x, pend: 0x%x\n",
+		__func__, ier, isr, pend);
+	dev_dbg(i2c->adap.dev.parent, "%s: SR: 0x%x, msg: %p, nmsgs: %d\n",
+		__func__, xiic_getreg8(i2c, XIIC_SR_REG_OFFSET),
 		i2c->tx_msg, i2c->nmsgs);
 
 	/* Do not processes a devices interrupts if the device has no
@@ -542,9 +544,10 @@ static void xiic_start_send(struct xiic_i2c *i2c)
 
 	xiic_irq_clr(i2c, XIIC_INTR_TX_ERROR_MASK);
 
-	dev_dbg(i2c->adap.dev.parent, "%s entry, msg: %p, len: %d, "
-		"ISR: 0x%x, CR: 0x%x\n",
-		__func__, msg, msg->len, xiic_getreg32(i2c, XIIC_IISR_OFFSET),
+	dev_dbg(i2c->adap.dev.parent, "%s entry, msg: %p, len: %d",
+		__func__, msg, msg->len);
+	dev_dbg(i2c->adap.dev.parent, "%s entry, ISR: 0x%x, CR: 0x%x\n",
+		__func__, xiic_getreg32(i2c, XIIC_IISR_OFFSET),
 		xiic_getreg8(i2c, XIIC_CR_REG_OFFSET));
 
 	if (!(msg->flags & I2C_M_NOSTART)) {
@@ -695,33 +698,21 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	int ret, irq;
 	u8 i;
 
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		goto resource_missing;
+	i2c->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->base))
+		return PTR_ERR(i2c->base);
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
-		goto resource_missing;
+		return irq;
 
 	pdata = dev_get_platdata(&pdev->dev);
 
-	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
-	if (!i2c)
-		return -ENOMEM;
-
-	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
-		dev_err(&pdev->dev, "Memory region busy\n");
-		ret = -EBUSY;
-		goto request_mem_failed;
-	}
-
-	i2c->base = ioremap(res->start, resource_size(res));
-	if (!i2c->base) {
-		dev_err(&pdev->dev, "Unable to map registers\n");
-		ret = -EIO;
-		goto map_failed;
-	}
-
 	/* hook up driver to tree */
 	platform_set_drvdata(pdev, i2c);
 	i2c->adap = xiic_adapter;
@@ -729,21 +720,23 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	i2c->adap.dev.parent = &pdev->dev;
 	i2c->adap.dev.of_node = pdev->dev.of_node;
 
-	xiic_reinit(i2c);
-
 	spin_lock_init(&i2c->lock);
 	init_waitqueue_head(&i2c->wait);
-	ret = request_irq(irq, xiic_isr, 0, pdev->name, i2c);
-	if (ret) {
+
+	ret = devm_request_irq(&pdev->dev, irq, xiic_isr, 0, pdev->name, i2c);
+	if (ret < 0) {
 		dev_err(&pdev->dev, "Cannot claim IRQ\n");
-		goto request_irq_failed;
+		return ret;
 	}
 
+	xiic_reinit(i2c);
+
 	/* add i2c adapter to i2c tree */
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to add adapter\n");
-		goto add_adapter_failed;
+		xiic_deinit(i2c);
+		return ret;
 	}
 
 	if (pdata) {
@@ -753,43 +746,17 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	}
 
 	return 0;
-
-add_adapter_failed:
-	free_irq(irq, i2c);
-request_irq_failed:
-	xiic_deinit(i2c);
-	iounmap(i2c->base);
-map_failed:
-	release_mem_region(res->start, resource_size(res));
-request_mem_failed:
-	kfree(i2c);
-
-	return ret;
-resource_missing:
-	dev_err(&pdev->dev, "IRQ or Memory resource is missing\n");
-	return -ENOENT;
 }
 
 static int xiic_i2c_remove(struct platform_device *pdev)
 {
 	struct xiic_i2c *i2c = platform_get_drvdata(pdev);
-	struct resource *res;
 
 	/* remove adapter & data */
 	i2c_del_adapter(&i2c->adap);
 
 	xiic_deinit(i2c);
 
-	free_irq(platform_get_irq(pdev, 0), i2c);
-
-	iounmap(i2c->base);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res)
-		release_mem_region(res->start, resource_size(res));
-
-	kfree(i2c);
-
 	return 0;
 }
 
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index bad5b84a598..e835304e7b5 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -35,14 +35,15 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
 #include <linux/device.h>
+#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
-
 #include <linux/i2c/pca954x.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
 
 #define PCA954X_MAX_NCHANS 8
 
@@ -186,28 +187,43 @@ static int pca954x_probe(struct i2c_client *client,
 {
 	struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
 	struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct device_node *np = client->dev.of_node;
 	int num, force, class;
 	struct pca954x *data;
-	int ret = -ENODEV;
+	int ret;
 
 	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE))
-		goto err;
+		return -ENODEV;
 
-	data = kzalloc(sizeof(struct pca954x), GFP_KERNEL);
-	if (!data) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	data = devm_kzalloc(&client->dev, sizeof(struct pca954x), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
 
 	i2c_set_clientdata(client, data);
 
+	if (IS_ENABLED(CONFIG_OF) && np) {
+		enum of_gpio_flags flags;
+		int gpio;
+
+		/* Get the mux out of reset if a reset GPIO is specified. */
+		gpio = of_get_named_gpio_flags(np, "reset-gpio", 0, &flags);
+		if (gpio_is_valid(gpio)) {
+			ret = devm_gpio_request_one(&client->dev, gpio,
+					flags & OF_GPIO_ACTIVE_LOW ?
+					GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
+					"pca954x reset");
+			if (ret < 0)
+				return ret;
+		}
+	}
+
 	/* Write the mux register at addr to verify
 	 * that the mux is in fact present. This also
 	 * initializes the mux to disconnected state.
 	 */
 	if (i2c_smbus_write_byte(client, 0) < 0) {
 		dev_warn(&client->dev, "probe failed\n");
-		goto exit_free;
+		return -ENODEV;
 	}
 
 	data->type = id->driver_data;
@@ -252,9 +268,6 @@ static int pca954x_probe(struct i2c_client *client,
 virt_reg_failed:
 	for (num--; num >= 0; num--)
 		i2c_del_mux_adapter(data->virt_adaps[num]);
-exit_free:
-	kfree(data);
-err:
 	return ret;
 }
 
@@ -270,7 +283,6 @@ static int pca954x_remove(struct i2c_client *client)
 			data->virt_adaps[i] = NULL;
 		}
 
-	kfree(data);
 	return 0;
 }