summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorYaniv Rosner <yaniv.rosner@broadcom.com>2012-04-03 18:41:31 +0000
committerDavid S. Miller <davem@davemloft.net>2012-04-04 01:38:00 -0400
commit8f73f0b97208d9e1142fd32236b5d990ee4ed4b3 (patch)
treeb6a12441335460d010d0861bfdba28c1fa123017 /drivers
parent963052348fd33221d9ae4212d6cdaa2346e2678e (diff)
bnx2x: Change comments and white spaces
A semantic patch, fixing style issues in the bnx2x's link code. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c660
1 files changed, 241 insertions, 419 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index e255cc49f81..71e5bd00e8b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -138,7 +138,6 @@
-/* */
#define SFP_EEPROM_CON_TYPE_ADDR 0x2
#define SFP_EEPROM_CON_TYPE_VAL_LC 0x7
#define SFP_EEPROM_CON_TYPE_VAL_COPPER 0x21
@@ -404,8 +403,7 @@ static void bnx2x_ets_e2e3a0_disabled(struct link_params *params)
DP(NETIF_MSG_LINK, "ETS E2E3 disabled configuration\n");
- /*
- * mapping between entry priority to client number (0,1,2 -debug and
+ /* mapping between entry priority to client number (0,1,2 -debug and
* management clients, 3 - COS0 client, 4 - COS client)(HIGHEST)
* 3bits client num.
* PRI4 | PRI3 | PRI2 | PRI1 | PRI0
@@ -413,8 +411,7 @@ static void bnx2x_ets_e2e3a0_disabled(struct link_params *params)
*/
REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT, 0x4688);
- /*
- * Bitmap of 5bits length. Each bit specifies whether the entry behaves
+ /* Bitmap of 5bits length. Each bit specifies whether the entry behaves
* as strict. Bits 0,1,2 - debug and management entries, 3 -
* COS0 entry, 4 - COS1 entry.
* COS1 | COS0 | DEBUG1 | DEBUG0 | MGMT
@@ -425,13 +422,11 @@ static void bnx2x_ets_e2e3a0_disabled(struct link_params *params)
REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x7);
/* defines which entries (clients) are subjected to WFQ arbitration */
REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0);
- /*
- * For strict priority entries defines the number of consecutive
+ /* For strict priority entries defines the number of consecutive
* slots for the highest priority.
*/
REG_WR(bp, NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100);
- /*
- * mapping between the CREDIT_WEIGHT registers and actual client
+ /* mapping between the CREDIT_WEIGHT registers and actual client
* numbers
*/
REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP, 0);
@@ -443,8 +438,7 @@ static void bnx2x_ets_e2e3a0_disabled(struct link_params *params)
REG_WR(bp, PBF_REG_HIGH_PRIORITY_COS_NUM, 0);
/* ETS mode disable */
REG_WR(bp, PBF_REG_ETS_ENABLED, 0);
- /*
- * If ETS mode is enabled (there is no strict priority) defines a WFQ
+ /* If ETS mode is enabled (there is no strict priority) defines a WFQ
* weight for COS0/COS1.
*/
REG_WR(bp, PBF_REG_COS0_WEIGHT, 0x2710);
@@ -471,10 +465,9 @@ static u32 bnx2x_ets_get_min_w_val_nig(const struct link_vars *vars)
min_w_val = ETS_E3B0_NIG_MIN_W_VAL_UP_TO_10GBPS;
} else
min_w_val = ETS_E3B0_NIG_MIN_W_VAL_20GBPS;
- /**
- * If the link isn't up (static configuration for example ) The
- * link will be according to 20GBPS.
- */
+ /* If the link isn't up (static configuration for example ) The
+ * link will be according to 20GBPS.
+ */
return min_w_val;
}
/******************************************************************************
@@ -538,8 +531,7 @@ static void bnx2x_ets_e3b0_nig_disabled(const struct link_params *params,
struct bnx2x *bp = params->bp;
const u8 port = params->port;
const u32 min_w_val = bnx2x_ets_get_min_w_val_nig(vars);
- /**
- * mapping between entry priority to client number (0,1,2 -debug and
+ /* Mapping between entry priority to client number (0,1,2 -debug and
* management clients, 3 - COS0 client, 4 - COS1, ... 8 -
* COS5)(HIGHEST) 4bits client num.TODO_ETS - Should be done by
* reset value or init tool
@@ -551,18 +543,14 @@ static void bnx2x_ets_e3b0_nig_disabled(const struct link_params *params,
REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB, 0x76543210);
REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB, 0x8);
}
- /**
- * For strict priority entries defines the number of consecutive
- * slots for the highest priority.
- */
- /* TODO_ETS - Should be done by reset value or init tool */
+ /* For strict priority entries defines the number of consecutive
+ * slots for the highest priority.
+ */
REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS :
NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100);
- /**
- * mapping between the CREDIT_WEIGHT registers and actual client
+ /* Mapping between the CREDIT_WEIGHT registers and actual client
* numbers
*/
- /* TODO_ETS - Should be done by reset value or init tool */
if (port) {
/*Port 1 has 6 COS*/
REG_WR(bp, NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_LSB, 0x210543);
@@ -574,8 +562,7 @@ static void bnx2x_ets_e3b0_nig_disabled(const struct link_params *params,
REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB, 0x5);
}
- /**
- * Bitmap of 5bits length. Each bit specifies whether the entry behaves
+ /* Bitmap of 5bits length. Each bit specifies whether the entry behaves
* as strict. Bits 0,1,2 - debug and management entries, 3 -
* COS0 entry, 4 - COS1 entry.
* COS1 | COS0 | DEBUG1 | DEBUG0 | MGMT
@@ -590,13 +577,12 @@ static void bnx2x_ets_e3b0_nig_disabled(const struct link_params *params,
REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ :
NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0);
- /**
- * Please notice the register address are note continuous and a
- * for here is note appropriate.In 2 port mode port0 only COS0-5
- * can be used. DEBUG1,DEBUG1,MGMT are never used for WFQ* In 4
- * port mode port1 only COS0-2 can be used. DEBUG1,DEBUG1,MGMT
- * are never used for WFQ
- */
+ /* Please notice the register address are note continuous and a
+ * for here is note appropriate.In 2 port mode port0 only COS0-5
+ * can be used. DEBUG1,DEBUG1,MGMT are never used for WFQ* In 4
+ * port mode port1 only COS0-2 can be used. DEBUG1,DEBUG1,MGMT
+ * are never used for WFQ
+ */
REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 :
NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, 0x0);
REG_WR(bp, (port) ? NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 :
@@ -633,10 +619,9 @@ static void bnx2x_ets_e3b0_set_credit_upper_bound_pbf(
u32 base_upper_bound = 0;
u8 max_cos = 0;
u8 i = 0;
- /**
- * In 2 port mode port0 has COS0-5 that can be used for WFQ.In 4
- * port mode port1 has COS0-2 that can be used for WFQ.
- */
+ /* In 2 port mode port0 has COS0-5 that can be used for WFQ.In 4
+ * port mode port1 has COS0-2 that can be used for WFQ.
+ */
if (!port) {
base_upper_bound = PBF_REG_COS0_UPPER_BOUND_P0;
max_cos = DCBX_E3B0_MAX_NUM_COS_PORT0;
@@ -666,8 +651,7 @@ static void bnx2x_ets_e3b0_pbf_disabled(const struct link_params *params)
u32 base_weight = 0;
u8 max_cos = 0;
- /**
- * mapping between entry priority to client number 0 - COS0
+ /* Mapping between entry priority to client number 0 - COS0
* client, 2 - COS1, ... 5 - COS5)(HIGHEST) 4bits client num.
* TODO_ETS - Should be done by reset value or init tool
*/
@@ -695,10 +679,9 @@ static void bnx2x_ets_e3b0_pbf_disabled(const struct link_params *params)
REG_WR(bp, (port) ? PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 :
PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0 , 0);
- /**
- * In 2 port mode port0 has COS0-5 that can be used for WFQ.
- * In 4 port mode port1 has COS0-2 that can be used for WFQ.
- */
+ /* In 2 port mode port0 has COS0-5 that can be used for WFQ.
+ * In 4 port mode port1 has COS0-2 that can be used for WFQ.
+ */
if (!port) {
base_weight = PBF_REG_COS0_WEIGHT_P0;
max_cos = DCBX_E3B0_MAX_NUM_COS_PORT0;
@@ -738,7 +721,7 @@ static int bnx2x_ets_e3b0_disabled(const struct link_params *params,
/******************************************************************************
* Description:
* Disable will return basicly the values to init values.
-*.
+*
******************************************************************************/
int bnx2x_ets_disabled(struct link_params *params,
struct link_vars *vars)
@@ -867,7 +850,7 @@ static int bnx2x_ets_e3b0_set_cos_bw(struct bnx2x *bp,
/******************************************************************************
* Description:
* Calculate the total BW.A value of 0 isn't legal.
-*.
+*
******************************************************************************/
static int bnx2x_ets_e3b0_get_total_bw(
const struct link_params *params,
@@ -879,7 +862,6 @@ static int bnx2x_ets_e3b0_get_total_bw(
u8 is_bw_cos_exist = 0;
*total_bw = 0 ;
-
/* Calculate total BW requested */
for (cos_idx = 0; cos_idx < ets_params->num_of_cos; cos_idx++) {
if (ets_params->cos[cos_idx].state == bnx2x_cos_state_bw) {
@@ -887,10 +869,9 @@ static int bnx2x_ets_e3b0_get_total_bw(
if (!ets_params->cos[cos_idx].params.bw_params.bw) {
DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW"
"was set to 0\n");
- /*
- * This is to prevent a state when ramrods
+ /* This is to prevent a state when ramrods
* can't be sent
- */
+ */
ets_params->cos[cos_idx].params.bw_params.bw
= 1;
}
@@ -908,8 +889,7 @@ static int bnx2x_ets_e3b0_get_total_bw(
}
DP(NETIF_MSG_LINK,
"bnx2x_ets_E3B0_config total BW should be 100\n");
- /*
- * We can handle a case whre the BW isn't 100 this can happen
+ /* We can handle a case whre the BW isn't 100 this can happen
* if the TC are joined.
*/
}
@@ -919,7 +899,7 @@ static int bnx2x_ets_e3b0_get_total_bw(
/******************************************************************************
* Description:
* Invalidate all the sp_pri_to_cos.
-*.
+*
******************************************************************************/
static void bnx2x_ets_e3b0_sp_pri_to_cos_init(u8 *sp_pri_to_cos)
{
@@ -931,7 +911,7 @@ static void bnx2x_ets_e3b0_sp_pri_to_cos_init(u8 *sp_pri_to_cos)
* Description:
* Calculate and set the SP (ARB_PRIORITY_CLIENT) NIG and PBF registers
* according to sp_pri_to_cos.
-*.
+*
******************************************************************************/
static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params,
u8 *sp_pri_to_cos, const u8 pri,
@@ -964,7 +944,7 @@ static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params,
* Description:
* Returns the correct value according to COS and priority in
* the sp_pri_cli register.
-*.
+*
******************************************************************************/
static u64 bnx2x_e3b0_sp_get_pri_cli_reg(const u8 cos, const u8 cos_offset,
const u8 pri_set,
@@ -981,7 +961,7 @@ static u64 bnx2x_e3b0_sp_get_pri_cli_reg(const u8 cos, const u8 cos_offset,
* Description:
* Returns the correct value according to COS and priority in the
* sp_pri_cli register for NIG.
-*.
+*
******************************************************************************/
static u64 bnx2x_e3b0_sp_get_pri_cli_reg_nig(const u8 cos, const u8 pri_set)
{
@@ -997,7 +977,7 @@ static u64 bnx2x_e3b0_sp_get_pri_cli_reg_nig(const u8 cos, const u8 pri_set)
* Description:
* Returns the correct value according to COS and priority in the
* sp_pri_cli register for PBF.
-*.
+*
******************************************************************************/
static u64 bnx2x_e3b0_sp_get_pri_cli_reg_pbf(const u8 cos, const u8 pri_set)
{
@@ -1013,7 +993,7 @@ static u64 bnx2x_e3b0_sp_get_pri_cli_reg_pbf(const u8 cos, const u8 pri_set)
* Description:
* Calculate and set the SP (ARB_PRIORITY_CLIENT) NIG and PBF registers
* according to sp_pri_to_cos.(which COS has higher priority)
-*.
+*
******************************************************************************/
static int bnx2x_ets_e3b0_sp_set_pri_cli_reg(const struct link_params *params,
u8 *sp_pri_to_cos)
@@ -1149,8 +1129,7 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
return -EINVAL;
}
- /*
- * Upper bound is set according to current link speed (min_w_val
+ /* Upper bound is set according to current link speed (min_w_val
* should be the same for upper bound and COS credit val).
*/
bnx2x_ets_e3b0_set_credit_upper_bound_nig(params, min_w_val_nig);
@@ -1160,8 +1139,7 @@ int bnx2x_ets_e3b0_config(const struct link_params *params,
for (cos_entry = 0; cos_entry < ets_params->num_of_cos; cos_entry++) {
if (bnx2x_cos_state_bw == ets_params->cos[cos_entry].state) {
cos_bw_bitmap |= (1 << cos_entry);
- /*
- * The function also sets the BW in HW(not the mappin
+ /* The function also sets the BW in HW(not the mappin
* yet)
*/
bnx2x_status = bnx2x_ets_e3b0_set_cos_bw(
@@ -1217,14 +1195,12 @@ static void bnx2x_ets_bw_limit_common(const struct link_params *params)
/* ETS disabled configuration */
struct bnx2x *bp = params->bp;
DP(NETIF_MSG_LINK, "ETS enabled BW limit configuration\n");
- /*
- * defines which entries (clients) are subjected to WFQ arbitration
+ /* Defines which entries (clients) are subjected to WFQ arbitration
* COS0 0x8
* COS1 0x10
*/
REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0x18);
- /*
- * mapping between the ARB_CREDIT_WEIGHT registers and actual
+ /* Mapping between the ARB_CREDIT_WEIGHT registers and actual
* client numbers (WEIGHT_0 does not actually have to represent
* client 0)
* PRI4 | PRI3 | PRI2 | PRI1 | PRI0
@@ -1242,8 +1218,7 @@ static void bnx2x_ets_bw_limit_common(const struct link_params *params)
/* Defines the number of consecutive slots for the strict priority */
REG_WR(bp, PBF_REG_NUM_STRICT_ARB_SLOTS, 0);
- /*
- * Bitmap of 5bits length. Each bit specifies whether the entry behaves
+ /* Bitmap of 5bits length. Each bit specifies whether the entry behaves
* as strict. Bits 0,1,2 - debug and management entries, 3 - COS0
* entry, 4 - COS1 entry.
* COS1 | COS0 | DEBUG21 | DEBUG0 | MGMT
@@ -1298,8 +1273,7 @@ int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos)
u32 val = 0;
DP(NETIF_MSG_LINK, "ETS enabled strict configuration\n");
- /*
- * Bitmap of 5bits length. Each bit specifies whether the entry behaves
+ /* Bitmap of 5bits length. Each bit specifies whether the entry behaves
* as strict. Bits 0,1,2 - debug and management entries,
* 3 - COS0 entry, 4 - COS1 entry.
* COS1 | COS0 | DEBUG21 | DEBUG0 | MGMT
@@ -1307,8 +1281,7 @@ int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos)
* MCP and debug are strict
*/
REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x1F);
- /*
- * For strict priority entries defines the number of consecutive slots
+ /* For strict priority entries defines the number of consecutive slots
* for the highest priority.
*/
REG_WR(bp, NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100);
@@ -1320,8 +1293,7 @@ int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos)
/* Defines the number of consecutive slots for the strict priority */
REG_WR(bp, PBF_REG_HIGH_PRIORITY_COS_NUM, strict_cos);
- /*
- * mapping between entry priority to client number (0,1,2 -debug and
+ /* Mapping between entry priority to client number (0,1,2 -debug and
* management clients, 3 - COS0 client, 4 - COS client)(HIGHEST)
* 3bits client num.
* PRI4 | PRI3 | PRI2 | PRI1 | PRI0
@@ -1356,15 +1328,12 @@ static void bnx2x_update_pfc_xmac(struct link_params *params,
if (!(params->feature_config_flags &
FEATURE_CONFIG_PFC_ENABLED)) {
- /*
- * RX flow control - Process pause frame in receive direction
+ /* RX flow control - Process pause frame in receive direction
*/
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
pause_val |= XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN;
- /*
- * TX flow control - Send pause packet when buffer is full
- */
+ /* TX flow control - Send pause packet when buffer is full */
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
pause_val |= XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN;
} else {/* PFC support */
@@ -1450,8 +1419,7 @@ void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars,
static void bnx2x_set_mdio_clk(struct bnx2x *bp, u32 chip_id, u8 port)
{
u32 mode, emac_base;
- /**
- * Set clause 45 mode, slow down the MDIO clock to 2.5MHz
+ /* Set clause 45 mode, slow down the MDIO clock to 2.5MHz
* (a value of 49==0x31) and make sure that the AUTO poll is off
*/
@@ -1571,15 +1539,6 @@ static void bnx2x_umac_enable(struct link_params *params,
DP(NETIF_MSG_LINK, "enabling UMAC\n");
- /**
- * This register determines on which events the MAC will assert
- * error on the i/f to the NIG along w/ EOP.
- */
-
- /**
- * BD REG_WR(bp, NIG_REG_P0_MAC_RSV_ERR_MASK +
- * params->port*0x14, 0xfffff.
- */
/* This register opens the gate for the UMAC despite its name */
REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 1);
@@ -1642,8 +1601,7 @@ static void bnx2x_umac_enable(struct link_params *params,
val |= UMAC_COMMAND_CONFIG_REG_LOOP_ENA;
REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val);
- /*
- * Maximum Frame Length (RW). Defines a 14-Bit maximum frame
+ /* Maximum Frame Length (RW). Defines a 14-Bit maximum frame
* length used by the MAC receive logic to check frames.
*/
REG_WR(bp, umac_base + UMAC_REG_MAXFR, 0x2710);
@@ -1659,8 +1617,7 @@ static void bnx2x_xmac_init(struct link_params *params, u32 max_speed)
struct bnx2x *bp = params->bp;
u32 is_port4mode = bnx2x_is_4_port_mode(bp);
- /*
- * In 4-port mode, need to set the mode only once, so if XMAC is
+ /* In 4-port mode, need to set the mode only once, so if XMAC is
* already out of reset, it means the mode has already been set,
* and it must not* reset the XMAC again, since it controls both
* ports of the path
@@ -1684,13 +1641,13 @@ static void bnx2x_xmac_init(struct link_params *params, u32 max_speed)
if (is_port4mode) {
DP(NETIF_MSG_LINK, "Init XMAC to 2 ports x 10G per path\n");
- /* Set the number of ports on the system side to up to 2 */
+ /* Set the number of ports on the system side to up to 2 */
REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 1);
/* Set the number of ports on the Warp Core to 10G */
REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3);
} else {
- /* Set the number of ports on the system side to 1 */
+ /* Set the number of ports on the system side to 1 */
REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 0);
if (max_speed == SPEED_10000) {
DP(NETIF_MSG_LINK,
@@ -1722,8 +1679,7 @@ static void bnx2x_xmac_disable(struct link_params *params)
if (REG_RD(bp, MISC_REG_RESET_REG_2) &
MISC_REGISTERS_RESET_REG_2_XMAC) {
- /*
- * Send an indication to change the state in the NIG back to XON
+ /* Send an indication to change the state in the NIG back to XON
* Clearing this bit enables the next set of this bit to get
* rising edge
*/
@@ -1748,13 +1704,11 @@ static int bnx2x_xmac_enable(struct link_params *params,
bnx2x_xmac_init(params, vars->line_speed);
- /*
- * This register determines on which events the MAC will assert
+ /* This register determines on which events the MAC will assert
* error on the i/f to the NIG along w/ EOP.
*/
- /*
- * This register tells the NIG whether to send traffic to UMAC
+ /* This register tells the NIG whether to send traffic to UMAC
* or XMAC
*/
REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 0);
@@ -1856,8 +1810,7 @@ static int bnx2x_emac_enable(struct link_params *params,
val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
- /*
- * Setting this bit causes MAC control frames (except for pause
+ /* Setting this bit causes MAC control frames (except for pause
* frames) to be passed on for processing. This setting has no
* affect on the operation of the pause frames. This bit effects
* all packets regardless of RX Parser packet sorting logic.
@@ -1956,8 +1909,7 @@ static void bnx2x_update_pfc_bmac2(struct link_params *params,
struct link_vars *vars,
u8 is_lb)
{
- /*
- * Set rx control: Strip CRC and enable BigMAC to relay
+ /* Set rx control: Strip CRC and enable BigMAC to relay
* control packets to the system as well
*/
u32 wb_data[2];
@@ -2009,8 +1961,7 @@ static void bnx2x_update_pfc_bmac2(struct link_params *params,
REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_PFC_CONTROL, wb_data, 2);
- /*
- * Set Time (based unit is 512 bit time) between automatic
+ /* Set Time (based unit is 512 bit time) between automatic
* re-sending of PP packets amd enable automatic re-send of
* Per-Priroity Packet as long as pp_gen is asserted and
* pp_disable is low.
@@ -2079,7 +2030,7 @@ static int bnx2x_pfc_brb_get_config_params(
config_val->default_class1.full_xon = 0;
if (CHIP_IS_E2(bp)) {
- /* class0 defaults */
+ /* Class0 defaults */
config_val->default_class0.pause_xoff =
DEFAULT0_E2_BRB_MAC_PAUSE_XOFF_THR;
config_val->default_class0.pause_xon =
@@ -2088,7 +2039,7 @@ static int bnx2x_pfc_brb_get_config_params(
DEFAULT0_E2_BRB_MAC_FULL_XOFF_THR;
config_val->default_class0.full_xon =
DEFAULT0_E2_BRB_MAC_FULL_XON_THR;
- /* pause able*/
+ /* Pause able*/
config_val->pauseable_th.pause_xoff =
PFC_E2_BRB_MAC_PAUSE_XOFF_THR_PAUSE;
config_val->pauseable_th.pause_xon =
@@ -2107,7 +2058,7 @@ static int bnx2x_pfc_brb_get_config_params(
config_val->non_pauseable_th.full_xon =
PFC_E2_BRB_MAC_FULL_XON_THR_NON_PAUSE;
} else if (CHIP_IS_E3A0(bp)) {
- /* class0 defaults */
+ /* Class0 defaults */
config_val->default_class0.pause_xoff =
DEFAULT0_E3A0_BRB_MAC_PAUSE_XOFF_THR;
config_val->default_class0.pause_xon =
@@ -2116,7 +2067,7 @@ static int bnx2x_pfc_brb_get_config_params(
DEFAULT0_E3A0_BRB_MAC_FULL_XOFF_THR;
config_val->default_class0.full_xon =
DEFAULT0_E3A0_BRB_MAC_FULL_XON_THR;
- /* pause able */
+ /* Pause able */
config_val->pauseable_th.pause_xoff =
PFC_E3A0_BRB_MAC_PAUSE_XOFF_THR_PAUSE;
config_val->pauseable_th.pause_xon =
@@ -2135,7 +2086,7 @@ static int bnx2x_pfc_brb_get_config_params(
config_val->non_pauseable_th.full_xon =
PFC_E3A0_BRB_MAC_FULL_XON_THR_NON_PAUSE;
} else if (CHIP_IS_E3B0(bp)) {
- /* class0 defaults */
+ /* Class0 defaults */
config_val->default_class0.pause_xoff =
DEFAULT0_E3B0_BRB_MAC_PAUSE_XOFF_THR;
config_val->default_class0.pause_xon =
@@ -2298,27 +2249,23 @@ static int bnx2x_update_pfc_brb(struct link_params *params,
reg_th_config = &config_val.non_pauseable_th;
} else
reg_th_config = &config_val.default_class0;
- /*
- * The number of free blocks below which the pause signal to class 0
+ /* The number of free blocks below which the pause signal to class 0
* of MAC #n is asserted. n=0,1
*/
REG_WR(bp, (port) ? BRB1_REG_PAUSE_0_XOFF_THRESHOLD_1 :
BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0 ,
reg_th_config->pause_xoff);
- /*
- * The number of free blocks above which the pause signal to class 0
+ /* The number of free blocks above which the pause signal to class 0
* of MAC #n is de-asserted. n=0,1
*/
REG_WR(bp, (port) ? BRB1_REG_PAUSE_0_XON_THRESHOLD_1 :
BRB1_REG_PAUSE_0_XON_THRESHOLD_0 , reg_th_config->pause_xon);
- /*
- * The number of free blocks below which the full signal to class 0
+ /* The number of free blocks below which the full signal to class 0
* of MAC #n is asserted. n=0,1
*/
REG_WR(bp, (port) ? BRB1_REG_FULL_0_XOFF_THRESHOLD_1 :
BRB1_REG_FULL_0_XOFF_THRESHOLD_0 , reg_th_config->full_xoff);
- /*
- * The number of free blocks above which the full signal to class 0
+ /* The number of free blocks above which the full signal to class 0
* of MAC #n is de-asserted. n=0,1
*/
REG_WR(bp, (port) ? BRB1_REG_FULL_0_XON_THRESHOLD_1 :
@@ -2332,30 +2279,26 @@ static int bnx2x_update_pfc_brb(struct link_params *params,
reg_th_config = &config_val.non_pauseable_th;
} else
reg_th_config = &config_val.default_class1;
- /*
- * The number of free blocks below which the pause signal to
+ /* The number of free blocks below which the pause signal to
* class 1 of MAC #n is asserted. n=0,1
*/
REG_WR(bp, (port) ? BRB1_REG_PAUSE_1_XOFF_THRESHOLD_1 :
BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0,
reg_th_config->pause_xoff);
- /*
- * The number of free blocks above which the pause signal to
+ /* The number of free blocks above which the pause signal to
* class 1 of MAC #n is de-asserted. n=0,1
*/
REG_WR(bp, (port) ? BRB1_REG_PAUSE_1_XON_THRESHOLD_1 :
BRB1_REG_PAUSE_1_XON_THRESHOLD_0,
reg_th_config->pause_xon);
- /*
- * The number of free blocks below which the full signal to
+ /* The number of free blocks below which the full signal to
* class 1 of MAC #n is asserted. n=0,1
*/
REG_WR(bp, (port) ? BRB1_REG_FULL_1_XOFF_THRESHOLD_1 :
BRB1_REG_FULL_1_XOFF_THRESHOLD_0,
reg_th_config->full_xoff);
- /*
- * The number of free blocks above which the full signal to
+ /* The number of free blocks above which the full signal to
* class 1 of MAC #n is de-asserted. n=0,1
*/
REG_WR(bp, (port) ? BRB1_REG_FULL_1_XON_THRESHOLD_1 :
@@ -2372,49 +2315,41 @@ static int bnx2x_update_pfc_brb(struct link_params *params,
REG_WR(bp, BRB1_REG_PER_CLASS_GUARANTY_MODE,
e3b0_val.per_class_guaranty_mode);
- /*
- * The hysteresis on the guarantied buffer space for the Lb
+ /* The hysteresis on the guarantied buffer space for the Lb
* port before signaling XON.
*/
REG_WR(bp, BRB1_REG_LB_GUARANTIED_HYST,
e3b0_val.lb_guarantied_hyst);
- /*
- * The number of free blocks below which the full signal to the
+ /* The number of free blocks below which the full signal to the
* LB port is asserted.
*/
REG_WR(bp, BRB1_REG_FULL_LB_XOFF_THRESHOLD,
e3b0_val.full_lb_xoff_th);
- /*
- * The number of free blocks above which the full signal to the
+ /* The number of free blocks above which the full signal to the
* LB port is de-asserted.
*/
REG_WR(bp, BRB1_REG_FULL_LB_XON_THRESHOLD,
e3b0_val.full_lb_xon_threshold);
- /*
- * The number of blocks guarantied for the MAC #n port. n=0,1
+ /* The number of blocks guarantied for the MAC #n port. n=0,1
*/
- /* The number of blocks guarantied for the LB port.*/
+ /* The number of blocks guarantied for the LB port. */
REG_WR(bp, BRB1_REG_LB_GUARANTIED,
e3b0_val.lb_guarantied);
- /*
- * The number of blocks guarantied for the MAC #n port.
- */
+ /* The number of blocks guarantied for the MAC #n port. */
REG_WR(bp, BRB1_REG_MAC_GUARANTIED_0,
2 * e3b0_val.mac_0_class_t_guarantied);
REG_WR(bp, BRB1_REG_MAC_GUARANTIED_1,
2 * e3b0_val.mac_1_class_t_guarantied);
- /*
- * The number of blocks guarantied for class #t in MAC0. t=0,1
+ /* The number of blocks guarantied for class #t in MAC0. t=0,1
*/
REG_WR(bp, BRB1_REG_MAC_0_CLASS_0_GUARANTIED,
e3b0_val.mac_0_class_t_guarantied);
REG_WR(bp, BRB1_REG_MAC_0_CLASS_1_GUARANTIED,
e3b0_val.mac_0_class_t_guarantied);
- /*
- * The hysteresis on the guarantied buffer space for class in
+ /* The hysteresis on the guarantied buffer space for class in
* MAC0. t=0,1
*/
REG_WR(bp, BRB1_REG_MAC_0_CLASS_0_GUARANTIED_HYST,
@@ -2422,15 +2357,13 @@ static int bnx2x_update_pfc_brb(struct link_params *params,
REG_WR(bp, BRB1_REG_MAC_0_CLASS_1_GUARANTIED_HYST,
e3b0_val.mac_0_class_t_guarantied_hyst);
- /*
- * The number of blocks guarantied for class #t in MAC1.t=0,1
+ /* The number of blocks guarantied for class #t in MAC1.t=0,1
*/
REG_WR(bp, BRB1_REG_MAC_1_CLASS_0_GUARANTIED,
e3b0_val.mac_1_class_t_guarantied);
REG_WR(bp, BRB1_REG_MAC_1_CLASS_1_GUARANTIED,
e3b0_val.mac_1_class_t_guarantied);
- /*
- * The hysteresis on the guarantied buffer space for class #t
+ /* The hysteresis on the guarantied buffer space for class #t
* in MAC1. t=0,1
*/
REG_WR(bp, BRB1_REG_MAC_1_CLASS_0_GUARANTIED_HYST,
@@ -2513,15 +2446,13 @@ static void bnx2x_update_pfc_nig(struct link_params *params,
FEATURE_CONFIG_PFC_ENABLED;
DP(NETIF_MSG_LINK, "updating pfc nig parameters\n");
- /*
- * When NIG_LLH0_XCM_MASK_REG_LLHX_XCM_MASK_BCN bit is set
+ /* When NIG_LLH0_XCM_MASK_REG_LLHX_XCM_MASK_BCN bit is set
* MAC control frames (that are not pause packets)
* will be forwarded to the XCM.
*/
xcm_mask = REG_RD(bp, port ? NIG_REG_LLH1_XCM_MASK :
NIG_REG_LLH0_XCM_MASK);
- /*
- * nig params will override non PFC params, since it's possible to
+ /* NIG params will override non PFC params, since it's possible to
* do transition from PFC to SAFC
*/
if (set_pfc) {
@@ -2541,7 +2472,7 @@ static void bnx2x_update_pfc_nig(struct link_params *params,
llfc_out_en = nig_params->llfc_out_en;
llfc_enable = nig_params->llfc_enable;
pause_enable = nig_params->pause_enable;
- } else /*defaul non PFC mode - PAUSE */
+ } else /* Default non PFC mode - PAUSE */
pause_enable = 1;
xcm_mask |= (port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN :
@@ -2601,8 +2532,7 @@ int bnx2x_update_pfc(struct link_params *params,
struct link_vars *vars,
struct bnx2x_nig_brb_pfc_port_params *pfc_params)
{
- /*
- * The PFC and pause are orthogonal to one another, meaning when
+ /* The PFC and pause are orthogonal to one another, meaning when
* PFC is enabled, the pause are disabled, and when PFC is
* disabled, pause are set according to the pause result.
*/
@@ -3141,7 +3071,6 @@ static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy,
EMAC_MDIO_STATUS_10MB);
/* address */
-
tmp = ((phy->addr << 21) | (devad << 16) | reg |
EMAC_MDIO_COMM_COMMAND_ADDRESS |
EMAC_MDIO_COMM_START_BUSY);
@@ -3330,8 +3259,7 @@ int bnx2x_phy_read(struct link_params *params, u8 phy_addr,
u8 devad, u16 reg, u16 *ret_val)
{
u8 phy_index;
- /*
- * Probe for the phy according to the given phy_addr, and execute
+ /* Probe for the phy according to the given phy_addr, and execute
* the read request on it
*/
for (phy_index = 0; phy_index < params->num_phys; phy_index++) {
@@ -3348,8 +3276,7 @@ int bnx2x_phy_write(struct link_params *params, u8 phy_addr,
u8 devad, u16 reg, u16 val)
{
u8 phy_index;
- /*
- * Probe for the phy according to the given phy_addr, and execute
+ /* Probe for the phy according to the given phy_addr, and execute
* the write request on it
*/
for (phy_index = 0; phy_index < params->num_phys; phy_index++) {
@@ -3375,7 +3302,7 @@ static u8 bnx2x_get_warpcore_lane(struct bnx2x_phy *phy,
if (bnx2x_is_4_port_mode(bp)) {
u32 port_swap, port_swap_ovr;
- /*figure out path swap value */
+ /* Figure out path swap value */
path_swap_ovr = REG_RD(bp, MISC_REG_FOUR_PORT_PATH_SWAP_OVWR);
if (path_swap_ovr & 0x1)
path_swap = (path_swap_ovr & 0x2);
@@ -3385,7 +3312,7 @@ static u8 bnx2x_get_warpcore_lane(struct bnx2x_phy *phy,
if (path_swap)
path = path ^ 1;
- /*figure out port swap value */
+ /* Figure out port swap value */
port_swap_ovr = REG_RD(bp, MISC_REG_FOUR_PORT_PORT_SWAP_OVWR);
if (port_swap_ovr & 0x1)
port_swap = (port_swap_ovr & 0x2);
@@ -3398,7 +3325,7 @@ static u8 bnx2x_get_warpcore_lane(struct bnx2x_phy *phy,
lane = (port<<1) + path;
} else { /* two port mode - no port swap */
- /*figure out path swap value */
+ /* Figure out path swap value */
path_swap_ovr =
REG_RD(bp, MISC_REG_TWO_PORT_PATH_SWAP_OVWR);
if (path_swap_ovr & 0x1) {
@@ -3430,8 +3357,7 @@ static void bnx2x_set_aer_mmd(struct link_params *params,
if (USES_WARPCORE(bp)) {
aer_val = bnx2x_get_warpcore_lane(phy, params);
- /*
- * In Dual-lane mode, two lanes are joined together,
+ /* In Dual-lane mode, two lanes are joined together,
* so in order to configure them, the AER broadcast method is
* used here.
* 0x200 is the broadcast address for lanes 0,1
@@ -3511,8 +3437,7 @@ static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy,
{
struct bnx2x *bp = params->bp;
*ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
- /**
- * resolve pause mode and advertisement Please refer to Table
+ /* Resolve pause mode and advertisement Please refer to Table
* 28B-3 of the 802.3ab-1999 spec
*/
@@ -3635,6 +3560,7 @@ static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
vars->link_status |= LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE;
if (pause_result & (1<<1))
vars->link_status |= LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE;
+
}
static void bnx2x_ext_phy_update_adv_fc(struct bnx2x_phy *phy,
@@ -3664,6 +3590,7 @@ static void bnx2x_ext_phy_update_adv_fc(struct bnx2x_phy *phy,
bnx2x_pause_resolve(vars, pause_result);
}
+
static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars)
@@ -3769,9 +3696,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
/* Advertise pause */
bnx2x_ext_phy_set_pause(params, phy, vars);
-
- /*
- * Set KR Autoneg Work-Around flag for Warpcore version older than D108
+ /* Set KR Autoneg Work-Around flag for Warpcore version older than D108
*/
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_UC_INFO_B1_VERSION, &val16);
@@ -3779,7 +3704,6 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "Enable AN KR work-around\n");
vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY;
}
-
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL5_MISC7, &val16);
@@ -3853,7 +3777,7 @@ static void bnx2x_warpcore_set_10G_KR(struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD,
MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0xB);
- /*Enable encoded forced speed */
+ /* Enable encoded forced speed */
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x30);
@@ -4215,8 +4139,7 @@ static int bnx2x_get_mod_abs_int_cfg(struct bnx2x *bp,
PORT_HW_CFG_E3_MOD_ABS_MASK) >>
PORT_HW_CFG_E3_MOD_ABS_SHIFT;
- /*
- * Should not happen. This function called upon interrupt
+ /* Should not happen. This function called upon interrupt
* triggered by GPIO ( since EPIO can only generate interrupts
* to MCP).
* So if this function was called and none of the GPIOs was set,
@@ -4316,7 +4239,7 @@ static void bnx2x_warpcore_config_runtime(struct bnx2x_phy *phy,
"link up, rx_tx_asic_rst 0x%x\n",
vars->rx_tx_asic_rst);
} else {
- /*reset the lane to see if link comes up.*/
+ /* Reset the lane to see if link comes up.*/
bnx2x_warpcore_reset_lane(bp, phy, 1);
bnx2x_warpcore_reset_lane(bp, phy, 0);
@@ -4337,7 +4260,6 @@ static void bnx2x_warpcore_config_runtime(struct bnx2x_phy *phy,
} /*params->rx_tx_asic_rst*/
}
-
static void bnx2x_warpcore_config_init(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars)
@@ -4495,7 +4417,7 @@ static void bnx2x_warpcore_link_reset(struct bnx2x_phy *phy,
/* Update those 1-copy registers */
CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
MDIO_AER_BLOCK_AER_REG, 0);
- /* Enable 1G MDIO (1-copy) */
+ /* Enable 1G MDIO (1-copy) */
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_XGXSBLK0_XGXSCONTROL,
&val16);
@@ -4574,43 +4496,43 @@ void bnx2x_sync_link(struct link_params *params,
vars->duplex = DUPLEX_FULL;
switch (vars->link_status &
LINK_STATUS_SPEED_AND_DUPLEX_MASK) {
- case LINK_10THD:
- vars->duplex = DUPLEX_HALF;
- /* fall thru */
- case LINK_10TFD:
- vars->line_speed = SPEED_10;
- break;
+ case LINK_10THD:
+ vars->duplex = DUPLEX_HALF;
+ /* Fall thru */
+ case LINK_10TFD:
+ vars->line_speed = SPEED_10;
+ break;
- case LINK_100TXHD:
- vars->duplex = DUPLEX_HALF;
- /* fall thru */
- case LINK_100T4:
- case LINK_100TXFD:
- vars->line_speed = SPEED_100;
- break;
+ case LINK_100TXHD:
+ vars->duplex = DUPLEX_HALF;
+ /* Fall thru */
+ case LINK_100T4:
+ case LINK_100TXFD:
+ vars->line_speed = SPEED_100;
+ break;
- case LINK_1000THD:
- vars->duplex = DUPLEX_HALF;
- /* fall thru */
- case LINK_1000TFD:
- vars->line_speed = SPEED_1000;
- break;
+ case LINK_1000THD:
+ vars->duplex = DUPLEX_HALF;
+ /* Fall thru */
+ case LINK_1000TFD:
+ vars->line_speed = SPEED_1000;
+ break;
- case LINK_2500THD:
- vars->duplex = DUPLEX_HALF;
- /* fall thru */
- case LINK_2500TFD:
- vars->line_speed = SPEED_2500;
- break;
+ case LINK_2500THD:
+ vars->duplex = DUPLEX_HALF;
+ /* Fall thru */
+ case LINK_2500TFD:
+ vars->line_speed = SPEED_2500;
+ break;
- case LINK_10GTFD:
- vars->line_speed = SPEED_10000;
- break;
- case LINK_20GTFD:
- vars->line_speed = SPEED_20000;
- break;
- default:
- break;
+ case LINK_10GTFD:
+ vars->line_speed = SPEED_10000;
+ break;
+ case LINK_20GTFD:
+ vars->line_speed = SPEED_20000;
+ break;
+ default:
+ break;
}
vars->flow_ctrl = 0;
if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED)
@@ -4785,9 +4707,8 @@ static void bnx2x_set_swap_lanes(struct link_params *params,
struct bnx2x_phy *phy)
{
struct bnx2x *bp = params->bp;
- /*
- * Each two bits represents a lane number:
- * No swap is 0123 => 0x1b no need to enable the swap
+ /* Each two bits represents a lane number:
+ * No swap is 0123 => 0x1b no need to enable the swap
*/
u16 rx_lane_swap, tx_lane_swap;
@@ -5001,8 +4922,7 @@ static void bnx2x_program_serdes(struct bnx2x_phy *phy,
MDIO_REG_BANK_COMBO_IEEE0,
MDIO_COMBO_IEEE0_MII_CONTROL, reg_val);
- /*
- * program speed
+ /* Program speed
* - needed only if the speed is greater than 1G (2.5G or 10G)
*/
CL22_RD_OVER_CL45(bp, phy,
@@ -5037,8 +4957,6 @@ static void bnx2x_set_brcm_cl37_advertisement(struct bnx2x_phy *phy,
struct bnx2x *bp = params->bp;
u16 val = 0;
- /* configure the 48 bits for BAM AN */
-
/* set extended capabilities */
if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)
val |= MDIO_OVER_1G_UP1_2_5G;
@@ -5184,11 +5102,8 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x_phy *phy,
}
}
-
-/*
- * link management
+/* Link management
*/
-
static int bnx2x_direct_parallel_detect_used(struct bnx2x_phy *phy,
struct link_params *params)
{
@@ -5333,8 +5248,7 @@ static void bnx2x_check_fallback_to_cl37(struct bnx2x_phy *phy,
"ustat_val(0x8371) = 0x%x\n", ustat_val);
return;
}
- /*
- * Step 3: Check CL37 Message Pages received to indicate LP
+ /* Step 3: Check CL37 Message Pages received to indicate LP
* supports only CL37
*/
CL22_RD_OVER_CL45(bp, phy,
@@ -5351,8 +5265,7 @@ static void bnx2x_check_fallback_to_cl37(struct bnx2x_phy *phy,
cl37_fsm_received);
return;
}
- /*
- * The combined cl37/cl73 fsm state information indicating that
+ /* The combined cl37/cl73 fsm state information indicating that
* we are connected to a device which does not support cl73, but
* does support cl37 BAM. In this case we disable cl73 and
* restart cl37 auto-neg
@@ -5923,8 +5836,7 @@ static void bnx2x_rearm_latch_signal(struct bnx2x *bp, u8 port,
{
u32 latch_status = 0;
- /*
- * Disable the MI INT ( external phy int ) by writing 1 to the
+ /* Disable the MI INT ( external phy int ) by writing 1 to the
* status register. Link down indication is high-active-signal,
* so in this case we need to write the status to clear the XOR
*/
@@ -5959,8 +5871,7 @@ static void bnx2x_link_int_ack(struct link_params *params,
struct bnx2x *bp = params->bp;
u8 port = params->port;
u32 mask;
- /*
- * First reset all status we assume only one line will be
+ /* First reset all status we assume only one line will be
* change at a time
*/
bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
@@ -5974,8 +5885,7 @@ static void bnx2x_link_int_ack(struct link_params *params,
if (is_10g_plus)
mask = NIG_STATUS_XGXS0_LINK10G;
else if (params->switch_cfg == SWITCH_CFG_10G) {
- /*
- * Disable the link interrupt by writing 1 to
+ /* Disable the link interrupt by writing 1 to
* the relevant lane in the status register
*/
u32 ser_lane =
@@ -6175,8 +6085,7 @@ int bnx2x_set_led(struct link_params *params,
break;
case LED_MODE_OPER:
- /*
- * For all other phys, OPER mode is same as ON, so in case
+ /* For all other phys, OPER mode is same as ON, so in case
* link is down, do nothing
*/
if (!vars->link_up)
@@ -6187,9 +6096,7 @@ int bnx2x_set_led(struct link_params *params,
(params->phy[EXT_PHY1].type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722)) &&
CHIP_IS_E2(bp) && params->num_phys == 2) {
- /*
- * This is a work-around for E2+8727 Configurations
- */
+ /* This is a work-around for E2+8727 Configurations */
if (mode == LED_MODE_ON ||
speed == SPEED_10000){
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
@@ -6198,8 +6105,7 @@ int bnx2x_set_led(struct link_params *params,
tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
EMAC_WR(bp, EMAC_REG_EMAC_LED,
(tmp | EMAC_LED_OVERRIDE));
- /*
- * return here without enabling traffic
+ /* Return here without enabling traffic
* LED blink and setting rate in ON mode.
* In oper mode, enabling LED blink
* and setting rate is needed.
@@ -6208,8 +6114,7 @@ int bnx2x_set_led(struct link_params *params,
return rc;
}
} else if (SINGLE_MEDIA_DIRECT(params)) {
- /*
- * This is a work-around for HW issue found when link
+ /* This is a work-around for HW issue found when link
* is up in CL73
*/
if ((!CHIP_IS_E3(bp)) ||
@@ -6257,10 +6162,7 @@ int bnx2x_set_led(struct link_params *params,
(speed == SPEED_1000) ||
(speed == SPEED_100) ||
(speed == SPEED_10))) {
- /*
- * On Everest 1 Ax chip versions for speeds less than
- * 10G LED scheme is different
- */
+ /* For speeds less than 10G LED scheme is different */
REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0
+ port*4, 1);
REG_WR(bp, NIG_REG_LED_CONTROL_TRAFFIC_P0 +
@@ -6280,8 +6182,7 @@ int bnx2x_set_led(struct link_params *params,
}
-/*
- * This function comes to reflect the actual link state read DIRECTLY from the
+/* This function comes to reflect the actual link state read DIRECTLY from the
* HW
*/
int bnx2x_test_link(struct link_params *params, struct link_vars *vars,
@@ -6369,16 +6270,14 @@ static int bnx2x_link_initialize(struct link_params *params,
int rc = 0;
u8 phy_index, non_ext_phy;
struct bnx2x *bp = params->bp;
- /*
- * In case of external phy existence, the line speed would be the
+ /* In case of external phy existence, the line speed would be the
* line speed linked up by the external phy. In case it is direct
* only, then the line_speed during initialization will be
* equal to the req_line_speed
*/
vars->line_speed = params->phy[INT_PHY].req_line_speed;
- /*
- * Initialize the internal phy in case this is a direct board
+ /* Initialize the internal phy in case this is a direct board
* (no external phys), or this board has external phy which requires
* to first.
*/
@@ -6410,8 +6309,7 @@ static int bnx2x_link_initialize(struct link_params *params,
} else {
for (phy_index = EXT_PHY1; phy_index < params->num_phys;
phy_index++) {
- /*
- * No need to initialize second phy in case of first
+ /* No need to initialize second phy in case of first
* phy only selection. In case of second phy, we do
* need to initialize the first phy, since they are
* connected.
@@ -6598,8 +6496,7 @@ static int bnx2x_update_link_up(struct link_params *params,
msleep(20);
return rc;
}
-/*
- * The bnx2x_link_update function should be called upon link
+/* The bnx2x_link_update function should be called upon link
* interrupt.
* Link is considered up as follows:
* - DIRECT_SINGLE_MEDIA - Only XGXS link (internal link) needs
@@ -6656,8 +6553,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
if (!CHIP_IS_E3(bp))
REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
- /*
- * Step 1:
+ /* Step 1:
* Check external link change only for external phys, and apply
* priority selection between them in case the link on both phys
* is up. Note that instead of the common vars, a temporary
@@ -6688,23 +6584,20 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
switch (bnx2x_phy_selection(params)) {
case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
- /*
- * In this option, the first PHY makes sure to pass the
+ /* In this option, the first PHY makes sure to pass the
* traffic through itself only.
* Its not clear how to reset the link on the second phy
*/
active_external_phy = EXT_PHY1;
break;
case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
- /*
- * In this option, the first PHY makes sure to pass the
+ /* In this option, the first PHY makes sure to pass the
* traffic through the second PHY.
*/
active_external_phy = EXT_PHY2;
break;
default:
- /*
- * Link indication on both PHYs with the following cases
+ /* Link indication on both PHYs with the following cases
* is invalid:
* - FIRST_PHY means that second phy wasn't initialized,
* hence its link is expected to be down
@@ -6721,8 +6614,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
}
}
prev_line_speed = vars->line_speed;
- /*
- * Step 2:
+ /* Step 2:
* Read the status of the internal phy. In case of
* DIRECT_SINGLE_MEDIA board, this link is the external link,
* otherwise this is the link between the 577xx and the first
@@ -6732,8 +6624,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
params->phy[INT_PHY].read_status(
&params->phy[INT_PHY],
params, vars);
- /*
- * The INT_PHY flow control reside in the vars. This include the
+ /* The INT_PHY flow control reside in the vars. This include the
* case where the speed or flow control are not set to AUTO.
* Otherwise, the active external phy flow control result is set
* to the vars. The ext_phy_line_speed is needed to check if the
@@ -6742,14 +6633,12 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
*/
if (active_external_phy > INT_PHY) {
vars->flow_ctrl = phy_vars[active_external_phy].flow_ctrl;
- /*
- * Link speed is taken from the XGXS. AN and FC result from
+ /* Link speed is taken from the XGXS. AN and FC result from
* the external phy.
*/
vars->link_status |= phy_vars[active_external_phy].link_status;
- /*
- * if active_external_phy is first PHY and link is up - disable
+ /* if active_external_phy is first PHY and link is up - disable
* disable TX on second external PHY
*/
if (active_external_phy == EXT_PHY1) {
@@ -6786,8 +6675,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
DP(NETIF_MSG_LINK, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x,"
" ext_phy_line_speed = %d\n", vars->flow_ctrl,
vars->link_status, ext_phy_line_speed);
- /*
- * Upon link speed change set the NIG into drain mode. Comes to
+ /* Upon link speed change set the NIG into drain mode. Comes to
* deals with possible FIFO glitch due to clk change when speed
* is decreased without link down indicator
*/
@@ -6812,8 +6700,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
bnx2x_link_int_ack(params, vars, link_10g_plus);
- /*
- * In case external phy link is up, and internal link is down
+ /* In case external phy link is up, and internal link is down
* (not initialized yet probably after link initialization, it
* needs to be initialized.
* Note that after link down-up as result of cable plug, the xgxs
@@ -6841,8 +6728,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
vars);
}
}
- /*
- * Link is up only if both local phy and external phy (in case of
+ /* Link is up only if both local phy and external phy (in case of
* non-direct board) are up and no fault detected on active PHY.
*/
vars->link_up = (vars->phy_link_up &&
@@ -7068,8 +6954,7 @@ static int bnx2x_8073_xaui_wa(struct bnx2x *bp, struct bnx2x_phy *phy)
}
/* XAUI workaround in 8073 A0: */
- /*
- * After loading the boot ROM and restarting Autoneg, poll
+ /* After loading the boot ROM and restarting Autoneg, poll
* Dev1, Reg $C820:
*/
@@ -7078,8 +6963,7 @@ static int bnx2x_8073_xaui_wa(struct bnx2x *bp, struct bnx2x_phy *phy)
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8073_SPEED_LINK_STATUS,
&val);
- /*
- * If bit [14] = 0 or bit [13] = 0, continue on with
+ /* If bit [14] = 0 or bit [13] = 0, continue on with
* system initialization (XAUI work-around not required, as
* these bits indicate 2.5G or 1G link up).
*/
@@ -7088,8 +6972,7 @@ static int bnx2x_8073_xaui_wa(struct bnx2x *bp, struct bnx2x_phy *phy)
return 0;
} else if (!(val & (1<<15))) {
DP(NETIF_MSG_LINK, "bit 15 went off\n");
- /*
- * If bit 15 is 0, then poll Dev1, Reg $C841 until it's
+ /* If bit 15 is 0, then poll Dev1, Reg $C841 until it's
* MSB (bit15) goes to 1 (indicating that the XAUI
* workaround has completed), then continue on with
* system initialization.
@@ -7239,8 +7122,7 @@ static int bnx2x_8073_config_init(struct bnx2x_phy *phy,
val = (1<<7);
} else if (phy->req_line_speed == SPEED_2500) {
val = (1<<5);
- /*
- * Note that 2.5G works only when used with 1G
+ /* Note that 2.5G works only when used with 1G
* advertisement
*/
} else
@@ -7291,8 +7173,7 @@ static int bnx2x_8073_config_init(struct bnx2x_phy *phy,
/* Add support for CL37 (passive mode) III */
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000);
- /*
- * The SNR will improve about 2db by changing BW and FEE main
+ /* The SNR will improve about 2db by changing BW and FEE main
* tap. Rest commands are executed after link is up
* Change FFE main cursor to 5 in EDC register
*/
@@ -7379,8 +7260,7 @@ static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy,
link_up = (((val1 & 4) == 4) || (an1000_status & (1<<1)));
if (link_up && bnx2x_8073_is_snr_needed(bp, phy)) {
- /*
- * The SNR will improve about 2dbby changing the BW and FEE main
+ /* The SNR will improve about 2dbby changing the BW and FEE main
* tap. The 1st write to change FFE main tap is set before
* restart AN. Change PLL Bandwidth in EDC register
*/
@@ -7427,8 +7307,7 @@ static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy,
bnx2x_cl45_read(bp, phy,
MDIO_XS_DEVAD,
MDIO_XS_REG_8073_RX_CTRL_PCIE, &val1);
- /*
- * Set bit 3 to invert Rx in 1G mode and clear this bit
+ /* Set bit 3 to invert Rx in 1G mode and clear this bit
* when it`s in 10G mode.
*/
if (vars->line_speed == SPEED_1000) {
@@ -7550,8 +7429,7 @@ static void bnx2x_set_disable_pmd_transmit(struct link_params *params,
u8 pmd_dis)
{
struct bnx2x *bp = params->bp;
- /*
- * Disable transmitter only for bootcodes which can enable it afterwards
+ /* Disable transmitter only for bootcodes which can enable it afterwards
* (for D3 link)
*/
if (pmd_dis) {
@@ -7728,9 +7606,6 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
u32 data_array[4];
u16 addr32;
struct bnx2x *bp = params->bp;
- /*DP(NETIF_MSG_LINK, "bnx2x_direct_read_sfp_module_eeprom:"
- " addr %d, cnt %d\n",
- addr, byte_cnt);*/
if (byte_cnt > 16) {
DP(NETIF_MSG_LINK,
"Reading from eeprom is limited to 16 bytes\n");
@@ -7795,8 +7670,7 @@ static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_SFP_TWO_WIRE_CTRL,
0x8002);
- /*
- * Wait appropriate time for two-wire command to finish before
+ /* Wait appropriate time for two-wire command to finish before
* polling the status register
*/
msleep(1);
@@ -7889,8 +7763,7 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy,
{
u8 copper_module_type;
phy->media_type = ETH_PHY_DA_TWINAX;
- /*
- * Check if its active cable (includes SFP+ module)
+ /* Check if its active cable (includes SFP+ module)
* of passive cable
*/
if (bnx2x_read_sfp_module_eeprom(phy,
@@ -7967,8 +7840,7 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "EDC mode is set to 0x%x\n", *edc_mode);
return 0;
}
-/*
- * This function read the relevant field from the module (SFP+), and verify it
+/* This function read the relevant field from the module (SFP+), and verify it
* is compliant with this board
*/
static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy,
@@ -8048,8 +7920,7 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy,
u8 val;
struct bnx2x *bp = params->bp;
u16 timeout;
- /*
- * Initialization time after hot-plug may take up to 300ms for
+ /* Initialization time after hot-plug may take up to 300ms for
* some phys type ( e.g. JDSU )
*/
@@ -8071,8 +7942,7 @@ static void bnx2x_8727_power_module(struct bnx2x *bp,
u8 is_power_up) {
/* Make sure GPIOs are not using for LED mode */
u16 val;
- /*
- * In the GPIO register, bit 4 is use to determine if the GPIOs are
+ /* In the GPIO register, bit 4 is use to determine if the GPIOs are
* operating as INPUT or as OUTPUT. Bit 1 is for input, and 0 for
* output
* Bits 0-1 determine the GPIOs value for OUTPUT in case bit 4 val is 0
@@ -8088,8 +7958,7 @@ static void bnx2x_8727_power_module(struct bnx2x *bp,
if (is_power_up)
val = (1<<4);
else
- /*
- * Set GPIO control to OUTPUT, and set the power bit
+ /* Set GPIO control to OUTPUT, and set the power bit
* to according to the is_power_up
*/
val = (1<<1);
@@ -8123,8 +7992,7 @@ static int bnx2x_8726_set_limiting_mode(struct bnx2x *bp,
DP(NETIF_MSG_LINK, "Setting LRM MODE\n");
- /*
- * Changing to LRM mode takes quite few seconds. So do it only
+ /* Changing to LRM mode takes quite few seconds. So do it only
* if current mode is limiting (default is LRM)
*/
if (cur_limiting_mode != EDC_MODE_LIMITING)
@@ -8259,8 +8127,7 @@ static void bnx2x_set_sfp_module_fault_led(struct link_params *params,
struct bnx2x *bp = params->bp;
DP(NETIF_MSG_LINK, "Setting SFP+ module fault LED to %d\n", gpio_mode);
if (CHIP_IS_E3(bp)) {
- /*
- * Low ==> if SFP+ module is supported otherwise
+ /* Low ==> if SFP+ module is supported otherwise
* High ==> if SFP+ module is not on the approved vendor list
*/
bnx2x_set_e3_module_fault_led(params, gpio_mode);
@@ -8285,8 +8152,7 @@ static void bnx2x_warpcore_power_module(struct link_params *params,
return;
DP(NETIF_MSG_LINK, "Setting SFP+ module power to %d using pin cfg %d\n",
power, pin_cfg);
- /*
- * Low ==> corresponding SFP+ module is powered
+ /* Low ==> corresponding SFP+ module is powered
* high ==> the SFP+ module is powered down
*/
bnx2x_set_cfg_pin(bp, pin_cfg, power ^ 1);
@@ -8420,14 +8286,12 @@ int bnx2x_sfp_module_detection(struct bnx2x_phy *phy,
bnx2x_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_LOW);
}
- /*
- * Check and set limiting mode / LRM mode on 8726. On 8727 it
+ /* Check and set limiting mode / LRM mode on 8726. On 8727 it
* is done automatically
*/
bnx2x_set_limiting_mode(params, phy, edc_mode);
- /*
- * Enable transmit for this module if the module is approved, or
+ /* Enable transmit for this module if the module is approved, or
* if unapproved modules should also enable the Tx laser
*/
if (rc == 0 ||
@@ -8482,8 +8346,7 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
bnx2x_set_gpio_int(bp, gpio_num,
MISC_REGISTERS_GPIO_INT_OUTPUT_SET,
gpio_port);
- /*
- * Module was plugged out.
+ /* Module was plugged out.
* Disable transmit for this module
*/
phy->media_type = ETH_PHY_NOT_PRESENT;
@@ -8553,8 +8416,7 @@ static u8 bnx2x_8706_8726_read_status(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps"
" link_status 0x%x\n", rx_sd, pcs_status, val2);
- /*
- * link is up if both bit 0 of pmd_rx_sd and bit 0 of pcs_status
+ /* Link is up if both bit 0 of pmd_rx_sd and bit 0 of pcs_status
* are set, or if the autoneg bit 1 is set
*/
link_up = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1)));
@@ -8668,8 +8530,7 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy,
}
bnx2x_save_bcm_spirom_ver(bp, phy, params->port);
- /*
- * If TX Laser is controlled by GPIO_0, do not let PHY go into low
+ /* If TX Laser is controlled by GPIO_0, do not let PHY go into low
* power mode, if TX Laser is disabled
*/
@@ -8779,8 +8640,7 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
bnx2x_8726_external_rom_boot(phy, params);
- /*
- * Need to call module detected on initialization since the module
+ /* Need to call module detected on initialization since the module
* detection triggered by actual module insertion might occur before
* driver is loaded, and when driver is loaded, it reset all
* registers, including the transmitter
@@ -8817,8 +8677,7 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000);
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200);
- /*
- * Enable RX-ALARM control to receive interrupt for 1G speed
+ /* Enable RX-ALARM control to receive interrupt for 1G speed
* change
*/
bnx2x_cl45_write(bp, phy,
@@ -8919,8 +8778,7 @@ static void bnx2x_8727_hw_reset(struct bnx2x_phy *phy,
struct link_params *params) {
u32 swap_val, swap_override;
u8 port;
- /*
- * The PHY reset is controlled by GPIO 1. Fake the port number
+ /* The PHY reset is controlled by GPIO 1. Fake the port number
* to cancel the swap done in set_gpio()
*/
struct bnx2x *bp = params->bp;
@@ -8958,14 +8816,12 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, lasi_ctrl_val);
- /*
- * Initially configure MOD_ABS to interrupt when module is
+ /* Initially configure MOD_ABS to interrupt when module is
* presence( bit 8)
*/
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs);
- /*
- * Set EDC off by setting OPTXLOS signal input to low (bit 9).
+ /* Set EDC off by setting OPTXLOS signal input to low (bit 9).
* When the EDC is off it locks onto a reference clock and avoids
* becoming 'lost'
*/
@@ -8986,8 +8842,7 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
if (phy->flags & FLAGS_NOC)
val |= (3<<5);
- /*
- * Set 8727 GPIOs to input to allow reading from the 8727 GPIO0
+ /* Set 8727 GPIOs to input to allow reading from the 8727 GPIO0
* status which reflect SFP+ module over-current
*/
if (!(phy->flags & FLAGS_NOC))
@@ -9013,8 +8868,7 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, &tmp1);
DP(NETIF_MSG_LINK, "1.7 = 0x%x\n", tmp1);
- /*
- * Power down the XAUI until link is up in case of dual-media
+ /* Power down the XAUI until link is up in case of dual-media
* and 1G
*/
if (DUAL_MEDIA(params)) {
@@ -9039,8 +8893,7 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1300);
} else {
- /*
- * Since the 8727 has only single reset pin, need to set the 10G
+ /* Since the 8727 has only single reset pin, need to set the 10G
* registers although it is default
*/
bnx2x_cl45_write(bp, phy,
@@ -9055,8 +8908,7 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
0x0008);
}
- /*
- * Set 2-wire transfer rate of SFP+ module EEPROM
+ /* Set 2-wire transfer rate of SFP+ module EEPROM
* to 100Khz since some DACs(direct attached cables) do
* not work at 400Khz.
*/
@@ -9079,8 +8931,7 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
phy->tx_preemphasis[1]);
}
- /*
- * If TX Laser is controlled by GPIO_0, do not let PHY go into low
+ /* If TX Laser is controlled by GPIO_0, do not let PHY go into low
* power mode, if TX Laser is disabled
*/
tx_en_mode = REG_RD(bp, params->shmem_base +
@@ -9120,8 +8971,7 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK,
"MOD_ABS indication show module is absent\n");
phy->media_type = ETH_PHY_NOT_PRESENT;
- /*
- * 1. Set mod_abs to detect next module
+ /* 1. Set mod_abs to detect next module
* presence event
* 2. Set EDC off by setting OPTXLOS signal input to low
* (bit 9).
@@ -9135,8 +8985,7 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs);
- /*
- * Clear RX alarm since it stays up as long as
+ /* Clear RX alarm since it stays up as long as
* the mod_abs wasn't changed
*/
bnx2x_cl45_read(bp, phy,
@@ -9147,8 +8996,7 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
/* Module is present */
DP(NETIF_MSG_LINK,
"MOD_ABS indication show module is present\n");
- /*
- * First disable transmitter, and if the module is ok, the
+ /* First disable transmitter, and if the module is ok, the
* module_detection will enable it
* 1. Set mod_abs to detect next module absent event ( bit 8)
* 2. Restore the default polarity of the OPRXLOS signal and
@@ -9162,8 +9010,7 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs);
- /*
- * Clear RX alarm since it stays up as long as the mod_abs
+ /* Clear RX alarm since it stays up as long as the mod_abs
* wasn't changed. This is need to be done before calling the
* module detection, otherwise it will clear* the link update
* alarm
@@ -9224,8 +9071,7 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1);
- /*
- * If a module is present and there is need to check
+ /* If a module is present and there is need to check
* for over current
*/
if (!(phy->flags & FLAGS_NOC) && !(rx_alarm_status & (1<<5))) {
@@ -9291,8 +9137,7 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8073_SPEED_LINK_STATUS, &link_status);
- /*
- * Bits 0..2 --> speed detected,
+ /* Bits 0..2 --> speed detected,
* Bits 13..15--> link is down
*/
if ((link_status & (1<<2)) && (!(link_status & (1<<15)))) {
@@ -9335,8 +9180,7 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8727_PCS_GP, &val1);
- /*
- * In case of dual-media board and 1G, power up the XAUI side,
+ /* In case of dual-media board and 1G, power up the XAUI side,
* otherwise power it down. For 10G it is done automatically
*/
if (link_up)
@@ -9503,8 +9347,7 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
/* Save spirom version */
bnx2x_save_848xx_spirom_version(phy, bp, params->port);
}
- /*
- * This phy uses the NIG latch mechanism since link indication
+ /* This phy uses the NIG latch mechanism since link indication
* arrives through its LED4 and not via its LASI signal, so we
* get steady signal instead of clear on read
*/
@@ -9609,8 +9452,7 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
if (phy->req_duplex == DUPLEX_FULL)
autoneg_val |= (1<<8);
- /*
- * Always write this if this is not 84833.
+ /* Always write this if this is not 84833.
* For 84833, write it only when it's a forced speed.
*/
if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
@@ -9849,8 +9691,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
/* Wait for GPHY to come out of reset */
msleep(50);
if (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) {
- /*
- * BCM84823 requires that XGXS links up first @ 10G for normal
+ /* BCM84823 requires that XGXS links up first @ 10G for normal
* behavior.
*/
u16 temp;
@@ -10326,8 +10167,7 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy,
break;
}
- /*
- * This is a workaround for E3+84833 until autoneg
+ /* This is a workaround for E3+84833 until autoneg
* restart is fixed in f/w
*/
if (CHIP_IS_E3(bp)) {
@@ -10351,8 +10191,7 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "54618SE cfg init\n");
usleep_range(1000, 1000);
- /*
- * This works with E3 only, no need to check the chip
+ /* This works with E3 only, no need to check the chip
* before determining the port.
*/
port = params->port;
@@ -10374,7 +10213,7 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy,
MDIO_PMA_REG_CTRL, 0x8000);
bnx2x_wait_reset_complete(bp, phy, params);
- /*wait for GPHY to reset */
+ /* Wait for GPHY to reset */
msleep(50);
/* Configure LED4: set to INTR (0x6). */
@@ -10580,13 +10419,11 @@ static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy,
u32 cfg_pin;
u8 port;
- /*
- * In case of no EPIO routed to reset the GPHY, put it
+ /* In case of no EPIO routed to reset the GPHY, put it
* in low power mode.
*/
bnx2x_cl22_write(bp, phy, MDIO_PMA_REG_CTRL, 0x800);
- /*
- * This works with E3 only, no need to check the chip
+ /* This works with E3 only, no need to check the chip
* before determining the port.
*/
port = params->port;
@@ -10695,7 +10532,7 @@ static u8 bnx2x_54618se_read_status(struct bnx2x_phy *phy,
bnx2x_ext_phy_resolve_fc(phy, params, vars);
if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) {
- /* report LP advertised speeds */
+ /* Report LP advertised speeds */
bnx2x_cl22_read(bp, phy, 0x5, &val);
if (val & (1<<5))
@@ -10760,8 +10597,7 @@ static void bnx2x_54618se_config_loopback(struct bnx2x_phy *phy,
/* This register opens the gate for the UMAC despite its name */
REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 1);
- /*
- * Maximum Frame Length (RW). Defines a 14-Bit maximum frame
+ /* Maximum Frame Length (RW). Defines a 14-Bit maximum frame
* length used by the MAC receive logic to check frames.
*/
REG_WR(bp, umac_base + UMAC_REG_MAXFR, 0x2710);
@@ -11040,17 +10876,17 @@ static struct bnx2x_phy phy_warpcore = {
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
.supported = (SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Full |
- SUPPORTED_10000baseT_Full |
- SUPPORTED_20000baseKR2_Full |
- SUPPORTED_20000baseMLD2_Full |
- SUPPORTED_FIBRE |
- SUPPORTED_Autoneg |
- SUPPORTED_Pause |
- SUPPORTED_Asym_Pause),
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_20000baseKR2_Full |
+ SUPPORTED_20000baseMLD2_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
.media_type = ETH_PHY_UNSPECIFIED,
.ver_addr = 0,
.req_flow_ctrl = 0,
@@ -11404,9 +11240,8 @@ static void bnx2x_populate_preemphasis(struct bnx2x *bp, u32 shmem_base,
/* Get the 4 lanes xgxs config rx and tx */
u32 rx = 0, tx = 0, i;
for (i = 0; i < 2; i++) {
- /*
- * INT_PHY and EXT_PHY1 share the same value location in the
- * shmem. When num_phys is greater than 1, than this value
+ /* INT_PHY and EXT_PHY1 share the same value location in
+ * the shmem. When num_phys is greater than 1, than this value
* applies only to EXT_PHY1
*/
if (phy_index == INT_PHY || phy_index == EXT_PHY1) {
@@ -11484,8 +11319,7 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
offsetof(struct shmem_region, dev_info.
port_hw_config[port].default_cfg)) &
PORT_HW_CFG_NET_SERDES_IF_MASK);
- /*
- * Set the appropriate supported and flags indications per
+ /* Set the appropriate supported and flags indications per
* interface type of the chip
*/
switch (serdes_net_if) {
@@ -11543,8 +11377,7 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
break;
}
- /*
- * Enable MDC/MDIO work-around for E3 A0 since free running MDC
+ /* Enable MDC/MDIO work-around for E3 A0 since free running MDC
* was not set as expected. For B0, ECO will be enabled so there
* won't be an issue there
*/
@@ -11657,8 +11490,7 @@ static int bnx2x_populate_ext_phy(struct bnx2x *bp,
phy->addr = XGXS_EXT_PHY_ADDR(ext_phy_config);
bnx2x_populate_preemphasis(bp, shmem_base, phy, port, phy_index);
- /*
- * The shmem address of the phy version is located on different
+ /* The shmem address of the phy version is located on different
* structures. In case this structure is too old, do not set
* the address
*/
@@ -11692,8 +11524,7 @@ static int bnx2x_populate_ext_phy(struct bnx2x *bp,
if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) &&
(phy->ver_addr)) {
- /*
- * Remove 100Mb link supported for BCM84833 when phy fw
+ /* Remove 100Mb link supported for BCM84833 when phy fw
* version lower than or equal to 1.39
*/
u32 raw_ver = REG_RD(bp, phy->ver_addr);
@@ -11703,8 +11534,7 @@ static int bnx2x_populate_ext_phy(struct bnx2x *bp,
SUPPORTED_100baseT_Full);
}
- /*
- * In case mdc/mdio_access of the external phy is different than the
+ /* In case mdc/mdio_access of the external phy is different than the
* mdc/mdio access of the XGXS, a HW lock must be taken in each access
* to prevent one port interfere with another port's CL45 operations.
*/
@@ -11883,8 +11713,7 @@ int bnx2x_phy_probe(struct link_params *params)
dev_info.port_hw_config[params->port].media_type);
media_types = REG_RD(bp, sync_offset);
- /*
- * Update media type for non-PMF sync only for the first time
+ /* Update media type for non-PMF sync only for the first time
* In case the media type changes afterwards, it will be updated
* using the update_status function
*/
@@ -11958,8 +11787,7 @@ void bnx2x_init_xmac_loopback(struct link_params *params,
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->mac_type = MAC_TYPE_XMAC;
vars->phy_flags = PHY_XGXS_FLAG;
- /*
- * Set WC to loopback mode since link is required to provide clock
+ /* Set WC to loopback mode since link is required to provide clock
* to the XMAC in 20G mode
*/
bnx2x_set_aer_mmd(params, &params->phy[0]);
@@ -12242,7 +12070,8 @@ static int bnx2x_8073_common_init_phy(struct bnx2x *bp,
NIG_MASK_MI_INT));
/* Need to take the phy out of low power mode in order
- to write to access its registers */
+ * to write to access its registers
+ */
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
port);
@@ -12290,8 +12119,7 @@ static int bnx2x_8073_common_init_phy(struct bnx2x *bp,
(val | 1<<10));
}
- /*
- * Toggle Transmitter: Power down and then up with 600ms delay
+ /* Toggle Transmitter: Power down and then up with 600ms delay
* between
*/
msleep(600);
@@ -12434,8 +12262,7 @@ static int bnx2x_8727_common_init_phy(struct bnx2x *bp,
reset_gpio = MISC_REGISTERS_GPIO_1;
port = 1;
- /*
- * Retrieve the reset gpio/port which control the reset.
+ /* Retrieve the reset gpio/port which control the reset.
* Default is GPIO1, PORT1
*/
bnx2x_get_ext_phy_reset_gpio(bp, shmem_base_path[0],
@@ -12610,8 +12437,7 @@ static int bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[],
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
- /*
- * GPIO1 affects both ports, so there's need to pull
+ /* GPIO1 affects both ports, so there's need to pull
* it for single port alone
*/
rc = bnx2x_8726_common_init_phy(bp, shmem_base_path,
@@ -12619,8 +12445,7 @@ static int bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[],
phy_index, chip_id);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833:
- /*
- * GPIO3's are linked, and so both need to be toggled
+ /* GPIO3's are linked, and so both need to be toggled
* to obtain required 2us pulse.
*/
rc = bnx2x_84833_common_init_phy(bp, shmem_base_path,
@@ -12734,8 +12559,7 @@ static void bnx2x_analyze_link_error(struct link_params *params,
DP(NETIF_MSG_LINK, "Link changed:%x %x->%x\n", vars->link_up,
half_open_conn, lss_status);
- /*
- * a. Update shmem->link_status accordingly
+ /* a. Update shmem->link_status accordingly
* b. Update link_vars->link_up
*/
if (lss_status) {
@@ -12746,8 +12570,7 @@ static void bnx2x_analyze_link_error(struct link_params *params,
/* activate nig drain */
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 1);
- /*
- * Set LED mode to off since the PHY doesn't know about these
+ /* Set LED mode to off since the PHY doesn't know about these
* errors
*/
led_mode = LED_MODE_OFF;
@@ -12799,8 +12622,7 @@ int bnx2x_check_half_open_conn(struct link_params *params,
(REG_RD(bp, MISC_REG_RESET_REG_2) &
(MISC_REGISTERS_RESET_REG_2_XMAC))) {
/* Check E3 XMAC */
- /*
- * Note that link speed cannot be queried here, since it may be
+ /* Note that link speed cannot be queried here, since it may be
* zero while link is down. In case UMAC is active, LSS will
* simply not be set
*/