lis3: add click function

The LIS302DL accelerometer chip has a 'click' feature which can be used to
detect sudden motion on any of the three axis.  Configuration data is
passed via spi platform_data and no action is taken if that's not
specified, so it won't harm any existing platform.

To make the configuration effective, the IRQ lines need to be set up
appropriately.  This patch also adds a way to do that from board support
code.

The DD_* definitions were factored out to an own enum because they are
specific to LIS3LV02D devices.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

3 files changed, 39 insertions, 1 deletions

diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 366190609c7..271338bdb6b 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -438,6 +438,26 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
 	if (lis3lv02d_joystick_enable())
 		printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
 
+	/* passing in platform specific data is purely optional and only
+	 * used by the SPI transport layer at the moment */
+	if (dev->pdata) {
+		struct lis3lv02d_platform_data *p = dev->pdata;
+
+		if (p->click_flags && (dev->whoami == LIS_SINGLE_ID)) {
+			dev->write(dev, CLICK_CFG, p->click_flags);
+			dev->write(dev, CLICK_TIMELIMIT, p->click_time_limit);
+			dev->write(dev, CLICK_LATENCY, p->click_latency);
+			dev->write(dev, CLICK_WINDOW, p->click_window);
+			dev->write(dev, CLICK_THSZ, p->click_thresh_z & 0xf);
+			dev->write(dev, CLICK_THSY_X,
+					(p->click_thresh_x & 0xf) |
+					(p->click_thresh_y << 4));
+		}
+
+		if (p->irq_cfg)
+			dev->write(dev, CTRL_REG3, p->irq_cfg);
+	}
+
 	/* bail if we did not get an IRQ from the bus layer */
 	if (!dev->irq) {
 		printk(KERN_ERR DRIVER_NAME
diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
index 5a5a196e6a6..e320e2f511f 100644
--- a/drivers/hwmon/lis3lv02d.h
+++ b/drivers/hwmon/lis3lv02d.h
@@ -29,12 +29,14 @@
  * They can also be connected via I²C.
  */
 
+#include <linux/lis3lv02d.h>
+
 /* 2-byte registers */
 #define LIS_DOUBLE_ID	0x3A /* LIS3LV02D[LQ] */
 /* 1-byte registers */
 #define LIS_SINGLE_ID	0x3B /* LIS[32]02DL and others */
 
-enum lis3lv02d_reg {
+enum lis3_reg {
 	WHO_AM_I	= 0x0F,
 	OFFSET_X	= 0x16,
 	OFFSET_Y	= 0x17,
@@ -62,6 +64,19 @@ enum lis3lv02d_reg {
 	FF_WU_THS_L	= 0x34,
 	FF_WU_THS_H	= 0x35,
 	FF_WU_DURATION	= 0x36,
+};
+
+enum lis302d_reg {
+	CLICK_CFG	= 0x38,
+	CLICK_SRC	= 0x39,
+	CLICK_THSY_X	= 0x3B,
+	CLICK_THSZ	= 0x3C,
+	CLICK_TIMELIMIT	= 0x3D,
+	CLICK_LATENCY	= 0x3E,
+	CLICK_WINDOW	= 0x3F,
+};
+
+enum lis3lv02d_reg {
 	DD_CFG		= 0x38,
 	DD_SRC		= 0x39,
 	DD_ACK		= 0x3A,
@@ -183,6 +198,8 @@ struct lis3lv02d {
 	struct fasync_struct	*async_queue; /* queue for the misc device */
 	wait_queue_head_t	misc_wait; /* Wait queue for the misc device */
 	unsigned long		misc_opened; /* bit0: whether the device is open */
+
+	struct lis3lv02d_platform_data *pdata;	/* for passing board config */
 };
 
 int lis3lv02d_init_device(struct lis3lv02d *lis3);
diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c
index 07ae74b0e19..3827ff04485 100644
--- a/drivers/hwmon/lis3lv02d_spi.c
+++ b/drivers/hwmon/lis3lv02d_spi.c
@@ -72,6 +72,7 @@ static int __devinit lis302dl_spi_probe(struct spi_device *spi)
 	lis3_dev.write = lis3_spi_write;
 	lis3_dev.irq = spi->irq;
 	lis3_dev.ac = lis3lv02d_axis_normal;
+	lis3_dev.pdata = spi->dev.platform_data;
 	spi_set_drvdata(spi, &lis3_dev);
 
 	ret = lis3lv02d_init_device(&lis3_dev);