Merge tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the driver core, and other driver subsystems, pull request for
  the 3.5-rc1 merge window.

  Outside of a few minor driver core changes, we ended up with the
  following different subsystem and core changes as well, due to
  interdependancies on the driver core:
   - hyperv driver updates
   - drivers/memory being created and some drivers moved into it
   - extcon driver subsystem created out of the old Android staging
     switch driver code
   - dynamic debug updates
   - printk rework, and /dev/kmsg changes

  All of this has been tested in the linux-next releases for a few weeks
  with no reported problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.

* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
  uio_pdrv_genirq: get irq through platform resource if not set otherwise
  memory: tegra{20,30}-mc: Remove empty *_remove()
  printk() - isolate KERN_CONT users from ordinary complete lines
  sysfs: get rid of some lockdep false positives
  Drivers: hv: util: Properly handle version negotiations.
  Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
  memory: tegra{20,30}-mc: Use dev_err_ratelimited()
  driver core: Add dev_*_ratelimited() family
  Driver Core: don't oops with unregistered driver in driver_find_device()
  printk() - restore prefix/timestamp printing for multi-newline strings
  printk: add stub for prepend_timestamp()
  ARM: tegra30: Make MC optional in Kconfig
  ARM: tegra20: Make MC optional in Kconfig
  ARM: tegra30: MC: Remove unnecessary BUG*()
  ARM: tegra20: MC: Remove unnecessary BUG*()
  printk: correctly align __log_buf
  ARM: tegra30: Add Tegra Memory Controller(MC) driver
  ARM: tegra20: Add Tegra Memory Controller(MC) driver
  printk() - restore timestamp printing at console output
  printk() - do not merge continuation lines of different threads
  ...

43 files changed, 4322 insertions, 625 deletions

diff --git a/drivers/Kconfig b/drivers/Kconfig
index d236aef7e59..63b81826cb5 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -140,4 +140,8 @@ source "drivers/virt/Kconfig"
 
 source "drivers/devfreq/Kconfig"
 
+source "drivers/extcon/Kconfig"
+
+source "drivers/memory/Kconfig"
+
 endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 95952c82bf1..265b506a15b 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -134,3 +134,5 @@ obj-$(CONFIG_VIRT_DRIVERS)	+= virt/
 obj-$(CONFIG_HYPERV)		+= hv/
 
 obj-$(CONFIG_PM_DEVFREQ)	+= devfreq/
+obj-$(CONFIG_EXTCON)		+= extcon/
+obj-$(CONFIG_MEMORY)		+= memory/
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 4a29763b8eb..a12808259df 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -720,21 +720,21 @@ static int acpi_pci_link_add(struct acpi_device *device)
 	       acpi_device_bid(device));
 	for (i = 0; i < link->irq.possible_count; i++) {
 		if (link->irq.active == link->irq.possible[i]) {
-			printk(" *%d", link->irq.possible[i]);
+			printk(KERN_CONT " *%d", link->irq.possible[i]);
 			found = 1;
 		} else
-			printk(" %d", link->irq.possible[i]);
+			printk(KERN_CONT " %d", link->irq.possible[i]);
 	}
 
-	printk(")");
+	printk(KERN_CONT ")");
 
 	if (!found)
-		printk(" *%d", link->irq.active);
+		printk(KERN_CONT " *%d", link->irq.active);
 
 	if (!link->device->status.enabled)
-		printk(", disabled.");
+		printk(KERN_CONT ", disabled.");
 
-	printk("\n");
+	printk(KERN_CONT "\n");
 
 	list_add_tail(&link->list, &acpi_link_list);
 
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index eb6fd233764..06527c52661 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -887,7 +887,7 @@ int __init acpi_sleep_init(void)
 		status = acpi_get_sleep_type_data(i, &type_a, &type_b);
 		if (ACPI_SUCCESS(status)) {
 			sleep_states[i] = 1;
-			printk(" S%d", i);
+			printk(KERN_CONT " S%d", i);
 		}
 	}
 
@@ -901,7 +901,7 @@ int __init acpi_sleep_init(void)
 		hibernation_set_ops(old_suspend_ordering ?
 			&acpi_hibernation_ops_old : &acpi_hibernation_ops);
 		sleep_states[ACPI_STATE_S4] = 1;
-		printk(" S4");
+		printk(KERN_CONT " S4");
 		if (!nosigcheck) {
 			acpi_get_table(ACPI_SIG_FACS, 1,
 				(struct acpi_table_header **)&facs);
@@ -914,11 +914,11 @@ int __init acpi_sleep_init(void)
 	status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
 	if (ACPI_SUCCESS(status)) {
 		sleep_states[ACPI_STATE_S5] = 1;
-		printk(" S5");
+		printk(KERN_CONT " S5");
 		pm_power_off_prepare = acpi_power_off_prepare;
 		pm_power_off = acpi_power_off;
 	}
-	printk(")\n");
+	printk(KERN_CONT ")\n");
 	/*
 	 * Register the tts_notifier to reboot notifier list so that the _TTS
 	 * object can also be evaluated when the system enters S5.
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 26a06b801b5..2bcef657a60 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -21,8 +21,7 @@
 #include "power/power.h"
 
 /* /sys/devices/system */
-/* FIXME: make static after drivers/base/sys.c is deleted */
-struct kset *system_kset;
+static struct kset *system_kset;
 
 #define to_bus_attr(_attr) container_of(_attr, struct bus_attribute, attr)
 
diff --git a/drivers/base/core.c b/drivers/base/core.c
index e28ce9898af..346be8b78b2 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -25,6 +25,7 @@
 #include <linux/mutex.h>
 #include <linux/async.h>
 #include <linux/pm_runtime.h>
+#include <linux/netdevice.h>
 
 #include "base.h"
 #include "power/power.h"
@@ -65,7 +66,7 @@ static inline int device_is_not_partition(struct device *dev)
  * @dev: struct device to get the name of
  *
  * Will return the device's driver's name if it is bound to a device.  If
- * the device is not bound to a device, it will return the name of the bus
+ * the device is not bound to a driver, it will return the name of the bus
  * it is attached to.  If it is not attached to a bus either, an empty
  * string will be returned.
  */
@@ -878,8 +879,8 @@ EXPORT_SYMBOL_GPL(dev_set_name);
  * to NULL prevents an entry from being created.  class->dev_kobj must
  * be set (or cleared) before any devices are registered to the class
  * otherwise device_create_sys_dev_entry() and
- * device_remove_sys_dev_entry() will disagree about the the presence
- * of the link.
+ * device_remove_sys_dev_entry() will disagree about the presence of
+ * the link.
  */
 static struct kobject *device_to_dev_kobj(struct device *dev)
 {
@@ -1843,15 +1844,60 @@ void device_shutdown(void)
  */
 
 #ifdef CONFIG_PRINTK
-
 int __dev_printk(const char *level, const struct device *dev,
 		 struct va_format *vaf)
 {
+	char dict[128];
+	size_t dictlen = 0;
+	const char *subsys;
+
 	if (!dev)
 		return printk("%s(NULL device *): %pV", level, vaf);
 
-	return printk("%s%s %s: %pV",
-		      level, dev_driver_string(dev), dev_name(dev), vaf);
+	if (dev->class)
+		subsys = dev->class->name;
+	else if (dev->bus)
+		subsys = dev->bus->name;
+	else
+		goto skip;
+
+	dictlen += snprintf(dict + dictlen, sizeof(dict) - dictlen,
+			    "SUBSYSTEM=%s", subsys);
+
+	/*
+	 * Add device identifier DEVICE=:
+	 *   b12:8         block dev_t
+	 *   c127:3        char dev_t
+	 *   n8            netdev ifindex
+	 *   +sound:card0  subsystem:devname
+	 */
+	if (MAJOR(dev->devt)) {
+		char c;
+
+		if (strcmp(subsys, "block") == 0)
+			c = 'b';
+		else
+			c = 'c';
+		dictlen++;
+		dictlen += snprintf(dict + dictlen, sizeof(dict) - dictlen,
+				   "DEVICE=%c%u:%u",
+				   c, MAJOR(dev->devt), MINOR(dev->devt));
+	} else if (strcmp(subsys, "net") == 0) {
+		struct net_device *net = to_net_dev(dev);
+
+		dictlen++;
+		dictlen += snprintf(dict + dictlen, sizeof(dict) - dictlen,
+				    "DEVICE=n%u", net->ifindex);
+	} else {
+		dictlen++;
+		dictlen += snprintf(dict + dictlen, sizeof(dict) - dictlen,
+				    "DEVICE=+%s:%s", subsys, dev_name(dev));
+	}
+skip:
+	return printk_emit(0, level[1] - '0',
+			   dictlen ? dict : NULL, dictlen,
+			   "%s %s: %pV",
+			   dev_driver_string(dev), dev_name(dev), vaf);
 }
 EXPORT_SYMBOL(__dev_printk);
 
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index 524bf96c289..2360adb7a58 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -309,6 +309,10 @@ EXPORT_SYMBOL_GPL(devres_remove);
  * which @match returns 1.  If @match is NULL, it's considered to
  * match all.  If found, the resource is removed atomically and freed.
  *
+ * Note that the release function for the resource will not be called,
+ * only the devres-allocated data will be freed.  The caller becomes
+ * responsible for freeing any other data.
+ *
  * RETURNS:
  * 0 if devres is found and freed, -ENOENT if not found.
  */
@@ -326,6 +330,37 @@ int devres_destroy(struct device *dev, dr_release_t release,
 }
 EXPORT_SYMBOL_GPL(devres_destroy);
 
+
+/**
+ * devres_release - Find a device resource and destroy it, calling release
+ * @dev: Device to find resource from
+ * @release: Look for resources associated with this release function
+ * @match: Match function (optional)
+ * @match_data: Data for the match function
+ *
+ * Find the latest devres of @dev associated with @release and for
+ * which @match returns 1.  If @match is NULL, it's considered to
+ * match all.  If found, the resource is removed atomically, the
+ * release function called and the resource freed.
+ *
+ * RETURNS:
+ * 0 if devres is found and freed, -ENOENT if not found.
+ */
+int devres_release(struct device *dev, dr_release_t release,
+		   dr_match_t match, void *match_data)
+{
+	void *res;
+
+	res = devres_remove(dev, release, match, match_data);
+	if (unlikely(!res))
+		return -ENOENT;
+
+	(*release)(dev, res);
+	devres_free(res);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devres_release);
+
 static int remove_nodes(struct device *dev,
 			struct list_head *first, struct list_head *end,
 			struct list_head *todo)
diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c
index 8493536ea55..765c3a28077 100644
--- a/drivers/base/devtmpfs.c
+++ b/drivers/base/devtmpfs.c
@@ -7,9 +7,9 @@
  * devtmpfs, a tmpfs-based filesystem is created. Every driver-core
  * device which requests a device node, will add a node in this
  * filesystem.
- * By default, all devices are named after the the name of the
- * device, owned by root and have a default mode of 0600. Subsystems
- * can overwrite the default setting if needed.
+ * By default, all devices are named after the name of the device,
+ * owned by root and have a default mode of 0600. Subsystems can
+ * overwrite the default setting if needed.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/base/dma-buf.c b/drivers/base/dma-buf.c
index 07cbbc6fddb..05c64c11bad 100644
--- a/drivers/base/dma-buf.c
+++ b/drivers/base/dma-buf.c
@@ -293,7 +293,7 @@ EXPORT_SYMBOL_GPL(dma_buf_unmap_attachment);
  * cpu in the kernel context. Calls begin_cpu_access to allow exporter-specific
  * preparations. Coherency is only guaranteed in the specified range for the
  * specified access direction.
- * @dma_buf:	[in]	buffer to prepare cpu access for.
+ * @dmabuf:	[in]	buffer to prepare cpu access for.
  * @start:	[in]	start of range for cpu access.
  * @len:	[in]	length of range for cpu access.
  * @direction:	[in]	length of range for cpu access.
@@ -320,7 +320,7 @@ EXPORT_SYMBOL_GPL(dma_buf_begin_cpu_access);
  * cpu in the kernel context. Calls end_cpu_access to allow exporter-specific
  * actions. Coherency is only guaranteed in the specified range for the
  * specified access direction.
- * @dma_buf:	[in]	buffer to complete cpu access for.
+ * @dmabuf:	[in]	buffer to complete cpu access for.
  * @start:	[in]	start of range for cpu access.
  * @len:	[in]	length of range for cpu access.
  * @direction:	[in]	length of range for cpu access.
@@ -340,7 +340,7 @@ EXPORT_SYMBOL_GPL(dma_buf_end_cpu_access);
 /**
  * dma_buf_kmap_atomic - Map a page of the buffer object into kernel address
  * space. The same restrictions as for kmap_atomic and friends apply.
- * @dma_buf:	[in]	buffer to map page from.
+ * @dmabuf:	[in]	buffer to map page from.
  * @page_num:	[in]	page in PAGE_SIZE units to map.
  *
  * This call must always succeed, any necessary preparations that might fail
@@ -356,7 +356,7 @@ EXPORT_SYMBOL_GPL(dma_buf_kmap_atomic);
 
 /**
  * dma_buf_kunmap_atomic - Unmap a page obtained by dma_buf_kmap_atomic.
- * @dma_buf:	[in]	buffer to unmap page from.
+ * @dmabuf:	[in]	buffer to unmap page from.
  * @page_num:	[in]	page in PAGE_SIZE units to unmap.
  * @vaddr:	[in]	kernel space pointer obtained from dma_buf_kmap_atomic.
  *
@@ -375,7 +375,7 @@ EXPORT_SYMBOL_GPL(dma_buf_kunmap_atomic);
 /**
  * dma_buf_kmap - Map a page of the buffer object into kernel address space. The
  * same restrictions as for kmap and friends apply.
- * @dma_buf:	[in]	buffer to map page from.
+ * @dmabuf:	[in]	buffer to map page from.
  * @page_num:	[in]	page in PAGE_SIZE units to map.
  *
  * This call must always succeed, any necessary preparations that might fail
@@ -391,7 +391,7 @@ EXPORT_SYMBOL_GPL(dma_buf_kmap);
 
 /**
  * dma_buf_kunmap - Unmap a page obtained by dma_buf_kmap.
- * @dma_buf:	[in]	buffer to unmap page from.
+ * @dmabuf:	[in]	buffer to unmap page from.
  * @page_num:	[in]	page in PAGE_SIZE units to unmap.
  * @vaddr:	[in]	kernel space pointer obtained from dma_buf_kmap.
  *
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index 3ec3896c83a..207c27ddf82 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -80,7 +80,7 @@ struct device *driver_find_device(struct device_driver *drv,
 	struct klist_iter i;
 	struct device *dev;
 
-	if (!drv)
+	if (!drv || !drv->p)
 		return NULL;
 
 	klist_iter_init_node(&drv->p->klist_devices, &i,
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index d6e9d081c8b..67c3371723c 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -807,44 +807,6 @@ static const struct file_operations oldmem_fops = {
 };
 #endif
 
-static ssize_t kmsg_writev(struct kiocb *iocb, const struct iovec *iv,
-			   unsigned long count, loff_t pos)
-{
-	char *line, *p;
-	int i;
-	ssize_t ret = -EFAULT;
-	size_t len = iov_length(iv, count);
-
-	line = kmalloc(len + 1, GFP_KERNEL);
-	if (line == NULL)
-		return -ENOMEM;
-
-	/*
-	 * copy all vectors into a single string, to ensure we do
-	 * not interleave our log line with other printk calls
-	 */
-	p = line;
-	for (i = 0; i < count; i++) {
-		if (copy_from_user(p, iv[i].iov_base, iv[i].iov_len))
-			goto out;
-		p += iv[i].iov_len;
-	}
-	p[0] = '\0';
-
-	ret = printk("%s", line);
-	/* printk can add a prefix */
-	if (ret > len)
-		ret = len;
-out:
-	kfree(line);
-	return ret;
-}
-
-static const struct file_operations kmsg_fops = {
-	.aio_write = kmsg_writev,
-	.llseek = noop_llseek,
-};
-
 static const struct memdev {
 	const char *name;
 	umode_t mode;
@@ -863,7 +825,9 @@ static const struct memdev {
 	 [7] = { "full", 0666, &full_fops, NULL },
 	 [8] = { "random", 0666, &random_fops, NULL },
 	 [9] = { "urandom", 0666, &urandom_fops, NULL },
-	[11] = { "kmsg", 0, &kmsg_fops, NULL },
+#ifdef CONFIG_PRINTK
+	[11] = { "kmsg", 0644, &kmsg_fops, NULL },
+#endif
 #ifdef CONFIG_CRASH_DUMP
 	[12] = { "oldmem", 0, &oldmem_fops, NULL },
 #endif
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
new file mode 100644
index 00000000000..29c5cf852ef
--- /dev/null
+++ b/drivers/extcon/Kconfig
@@ -0,0 +1,32 @@
+menuconfig EXTCON
+	tristate "External Connector Class (extcon) support"
+	help
+	  Say Y here to enable external connector class (extcon) support.
+	  This allows monitoring external connectors by userspace
+	  via sysfs and uevent and supports external connectors with
+	  multiple states; i.e., an extcon that may have multiple
+	  cables attached. For example, an external connector of a device
+	  may be used to connect an HDMI cable and a AC adaptor, and to
+	  host USB ports. Many of 30-pin connectors including PDMI are
+	  also good examples.
+
+if EXTCON
+
+comment "Extcon Device Drivers"
+
+config EXTCON_GPIO
+	tristate "GPIO extcon support"
+	depends on GENERIC_GPIO
+	help
+	  Say Y here to enable GPIO based extcon support. Note that GPIO
+	  extcon supports single state per extcon instance.
+
+config EXTCON_MAX8997
+	tristate "MAX8997 EXTCON Support"
+	depends on MFD_MAX8997
+	help
+	  If you say yes here you get support for the MUIC device of
+	  Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory
+	  detector and switch.
+
+endif # MULTISTATE_SWITCH
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
new file mode 100644
index 00000000000..86020bdb6da
--- /dev/null
+++ b/drivers/extcon/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for external connector class (extcon) devices
+#
+
+obj-$(CONFIG_EXTCON)		+= extcon_class.o
+obj-$(CONFIG_EXTCON_GPIO)	+= extcon_gpio.o
+obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o
diff --git a/drivers/misc/max8997-muic.c b/drivers/extcon/extcon-max8997.c
index 2e7df9c5649..23416e44376 100644
--- a/drivers/misc/max8997-muic.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -1,7 +1,7 @@
 /*
- * max8997-muic.c - MAX8997 muic driver for the Maxim 8997
+ * extcon-max8997.c - MAX8997 extcon driver to support MAX8997 MUIC
  *
- *  Copyright (C) 2011 Samsung Electrnoics
+ *  Copyright (C) 2012 Samsung Electrnoics
  *  Donggeun Kim <dg77.kim@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -13,11 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/kernel.h>
@@ -30,6 +25,9 @@
 #include <linux/kobject.h>
 #include <linux/mfd/max8997.h>
 #include <linux/mfd/max8997-private.h>
+#include <linux/extcon.h>
+
+#define	DEV_NAME			"max8997-muic"
 
 /* MAX8997-MUIC STATUS1 register */
 #define STATUS1_ADC_SHIFT		0
@@ -95,7 +93,6 @@ static struct max8997_muic_irq muic_irqs[] = {
 
 struct max8997_muic_info {
 	struct device *dev;
-	struct max8997_dev *iodev;
 	struct i2c_client *muic;
 	struct max8997_muic_platform_data *muic_pdata;
 
@@ -106,12 +103,28 @@ struct max8997_muic_info {
 	int pre_adc;
 
 	struct mutex mutex;
+
+	struct extcon_dev	*edev;
+};
+
+const char *max8997_extcon_cable[] = {
+	[0] = "USB",
+	[1] = "USB-Host",
+	[2] = "TA",
+	[3] = "Fast-charger",
+	[4] = "Slow-charger",
+	[5] = "Charge-downstream",
+	[6] = "MHL",
+	[7] = "Dock-desk",
+	[7] = "Dock-card",
+	[8] = "JIG",
+
+	NULL,
 };
 
 static int max8997_muic_handle_usb(struct max8997_muic_info *info,
 			enum max8997_muic_usb_type usb_type, bool attached)
 {
-	struct max8997_muic_platform_data *mdata = info->muic_pdata;
 	int ret = 0;
 
 	if (usb_type == MAX8997_USB_HOST) {
@@ -125,25 +138,25 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info,
 		}
 	}
 
-	if (mdata->usb_callback)
-		mdata->usb_callback(usb_type, attached);
+	switch (usb_type) {
+	case MAX8997_USB_HOST:
+		extcon_set_cable_state(info->edev, "USB-Host", attached);
+		break;
+	case MAX8997_USB_DEVICE:
+		extcon_set_cable_state(info->edev, "USB", attached);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
 out:
 	return ret;
 }
 
-static void max8997_muic_handle_mhl(struct max8997_muic_info *info,
-			bool attached)
-{
-	struct max8997_muic_platform_data *mdata = info->muic_pdata;
-
-	if (mdata->mhl_callback)
-		mdata->mhl_callback(attached);
-}
-
 static int max8997_muic_handle_dock(struct max8997_muic_info *info,
 			int adc, bool attached)
 {
-	struct max8997_muic_platform_data *mdata = info->muic_pdata;
 	int ret = 0;
 
 	/* switch to AUDIO */
@@ -157,14 +170,13 @@ static int max8997_muic_handle_dock(struct max8997_muic_info *info,
 
 	switch (adc) {
 	case MAX8997_ADC_DESKDOCK:
-		if (mdata->deskdock_callback)
-			mdata->deskdock_callback(attached);
+		extcon_set_cable_state(info->edev, "Dock-desk", attached);
 		break;
 	case MAX8997_ADC_CARDOCK:
-		if (mdata->cardock_callback)
-			mdata->cardock_callback(attached);
+		extcon_set_cable_state(info->edev, "Dock-card", attached);
 		break;
 	default:
+		ret = -EINVAL;
 		break;
 	}
 out:
@@ -174,7 +186,6 @@ out:
 static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
 			bool attached)
 {
-	struct max8997_muic_platform_data *mdata = info->muic_pdata;
 	int ret = 0;
 
 	/* switch to UART */
@@ -186,8 +197,7 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
 		goto out;
 	}
 
-	if (mdata->uart_callback)
-		mdata->uart_callback(attached);
+	extcon_set_cable_state(info->edev, "JIG", attached);
 out:
 	return ret;
 }
@@ -201,7 +211,7 @@ static int max8997_muic_handle_adc_detach(struct max8997_muic_info *info)
 		ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, false);
 		break;
 	case MAX8997_ADC_MHL:
-		max8997_muic_handle_mhl(info, false);
+		extcon_set_cable_state(info->edev, "MHL", false);
 		break;
 	case MAX8997_ADC_JIG_USB_1:
 	case MAX8997_ADC_JIG_USB_2:
@@ -230,7 +240,7 @@ static int max8997_muic_handle_adc(struct max8997_muic_info *info, int adc)
 		ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, true);
 		break;
 	case MAX8997_ADC_MHL:
-		max8997_muic_handle_mhl(info, true);
+		extcon_set_cable_state(info->edev, "MHL", true);
 		break;
 	case MAX8997_ADC_JIG_USB_1:
 	case MAX8997_ADC_JIG_USB_2:
@@ -247,10 +257,40 @@ static int max8997_muic_handle_adc(struct max8997_muic_info *info, int adc)
 		ret = max8997_muic_handle_adc_detach(info);
 		break;
 	default:
-		break;
+		ret = -EINVAL;
+		goto out;
 	}
 
 	info->pre_adc = adc;
+out:
+	return ret;
+}
+
+static int max8997_muic_handle_charger_type_detach(
+				struct max8997_muic_info *info)
+{
+	int ret = 0;
+
+	switch (info->pre_charger_type) {
+	case MAX8997_CHARGER_TYPE_USB:
+		extcon_set_cable_state(info->edev, "USB", false);
+		break;
+	case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
+		extcon_set_cable_state(info->edev, "Charge-downstream", false);
+		break;
+	case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
+		extcon_set_cable_state(info->edev, "TA", false);
+		break;
+	case MAX8997_CHARGER_TYPE_500MA:
+		extcon_set_cable_state(info->edev, "Slow-charger", false);
+		break;
+	case MAX8997_CHARGER_TYPE_1A:
+		extcon_set_cable_state(info->edev, "Fast-charger", false);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
 
 	return ret;
 }
@@ -258,7 +298,6 @@ static int max8997_muic_handle_adc(struct max8997_muic_info *info, int adc)
 static int max8997_muic_handle_charger_type(struct max8997_muic_info *info,
 				enum max8997_muic_charger_type charger_type)
 {
-	struct max8997_muic_platform_data *mdata = info->muic_pdata;
 	u8 adc;
 	int ret;
 
@@ -270,30 +309,29 @@ static int max8997_muic_handle_charger_type(struct max8997_muic_info *info,
 
 	switch (charger_type) {
 	case MAX8997_CHARGER_TYPE_NONE:
-		if (mdata->charger_callback)
-			mdata->charger_callback(false, charger_type);
-		if (info->pre_charger_type == MAX8997_CHARGER_TYPE_USB) {
-			max8997_muic_handle_usb(info,
-					MAX8997_USB_DEVICE, false);
-		}
+		ret = max8997_muic_handle_charger_type_detach(info);
 		break;
 	case MAX8997_CHARGER_TYPE_USB:
 		if ((adc & STATUS1_ADC_MASK) == MAX8997_ADC_OPEN) {
 			max8997_muic_handle_usb(info,
 					MAX8997_USB_DEVICE, true);
 		}
-		if (mdata->charger_callback)
-			mdata->charger_callback(true, charger_type);
 		break;
 	case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
+		extcon_set_cable_state(info->edev, "Charge-downstream", true);
+		break;
 	case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
+		extcon_set_cable_state(info->edev, "TA", true);
+		break;
 	case MAX8997_CHARGER_TYPE_500MA:
+		extcon_set_cable_state(info->edev, "Slow-charger", true);
+		break;
 	case MAX8997_CHARGER_TYPE_1A:
-		if (mdata->charger_callback)
-			mdata->charger_callback(true, charger_type);
+		extcon_set_cable_state(info->edev, "Fast-charger", true);
 		break;
 	default:
-		break;
+		ret = -EINVAL;
+		goto out;
 	}
 
 	info->pre_charger_type = charger_type;
@@ -305,18 +343,17 @@ static void max8997_muic_irq_work(struct work_struct *work)
 {
 	struct max8997_muic_info *info = container_of(work,
 			struct max8997_muic_info, irq_work);
-	struct max8997_platform_data *pdata =
-				dev_get_platdata(info->iodev->dev);
-	u8 status[3];
+	struct max8997_dev *max8997 = i2c_get_clientdata(info->muic);
+	u8 status[2];
 	u8 adc, chg_type;
 
-	int irq_type = info->irq - pdata->irq_base;
+	int irq_type = info->irq - max8997->irq_base;
 	int ret;
 
 	mutex_lock(&info->mutex);
 
 	ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1,
-				3, status);
+				2, status);
 	if (ret) {
 		dev_err(info->dev, "failed to read muic register\n");
 		mutex_unlock(&info->mutex);
@@ -340,8 +377,8 @@ static void max8997_muic_irq_work(struct work_struct *work)
 		max8997_muic_handle_charger_type(info, chg_type);
 		break;
 	default:
-		dev_info(info->dev, "misc interrupt: %s occurred\n",
-			 muic_irqs[irq_type].name);
+		dev_info(info->dev, "misc interrupt: irq %d occurred\n",
+				irq_type);
 		break;
 	}
 
@@ -387,21 +424,10 @@ static void max8997_muic_detect_dev(struct max8997_muic_info *info)
 	max8997_muic_handle_charger_type(info, chg_type);
 }
 
-static void max8997_initialize_device(struct max8997_muic_info *info)
-{
-	struct max8997_muic_platform_data *mdata = info->muic_pdata;
-	int i;
-
-	for (i = 0; i < mdata->num_init_data; i++) {
-		max8997_write_reg(info->muic, mdata->init_data[i].addr,
-				mdata->init_data[i].data);
-	}
-}
-
 static int __devinit max8997_muic_probe(struct platform_device *pdev)
 {
-	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
+	struct max8997_dev *max8997 = dev_get_drvdata(pdev->dev.parent);
+	struct max8997_platform_data *pdata = dev_get_platdata(max8997->dev);
 	struct max8997_muic_info *info;
 	int ret, i;
 
@@ -412,16 +438,8 @@ static int __devinit max8997_muic_probe(struct platform_device *pdev)
 		goto err_kfree;
 	}
 
-	if (!pdata->muic_pdata) {
-		dev_err(&pdev->dev, "failed to get platform_data\n");
-		ret = -EINVAL;
-		goto err_pdata;
-	}
-	info->muic_pdata = pdata->muic_pdata;
-
 	info->dev = &pdev->dev;
-	info->iodev = iodev;
-	info->muic = iodev->muic;
+	info->muic = max8997->muic;
 
 	platform_set_drvdata(pdev, info);
 	mutex_init(&info->mutex);
@@ -444,18 +462,41 @@ static int __devinit max8997_muic_probe(struct platform_device *pdev)
 		}
 	}
 
+	/* External connector */
+	info->edev = kzalloc(sizeof(struct extcon_dev), GFP_KERNEL);
+	if (!info->edev) {
+		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
+		ret = -ENOMEM;
+		goto err_irq;
+	}
+	info->edev->name = DEV_NAME;
+	info->edev->supported_cable = max8997_extcon_cable;
+	ret = extcon_dev_register(info->edev, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register extcon device\n");
+		goto err_extcon;
+	}
+
 	/* Initialize registers according to platform data */
-	max8997_initialize_device(info);
+	if (pdata->muic_pdata) {
+		struct max8997_muic_platform_data *mdata = info->muic_pdata;
+
+		for (i = 0; i < mdata->num_init_data; i++) {
+			max8997_write_reg(info->muic, mdata->init_data[i].addr,
+					mdata->init_data[i].data);
+		}
+	}
 
 	/* Initial device detection */
 	max8997_muic_detect_dev(info);
 
 	return ret;
 
+err_extcon:
+	kfree(info->edev);
 err_irq:
 	while (--i >= 0)
 		free_irq(pdata->irq_base + muic_irqs[i].irq, info);
-err_pdata:
 	kfree(info);
 err_kfree:
 	return ret;
@@ -464,14 +505,15 @@ err_kfree:
 static int __devexit max8997_muic_remove(struct platform_device *pdev)
 {
 	struct max8997_muic_info *info = platform_get_drvdata(pdev);
-	struct max8997_platform_data *pdata =
-				dev_get_platdata(info->iodev->dev);
+	struct max8997_dev *max8997 = i2c_get_clientdata(info->muic);
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(muic_irqs); i++)
-		free_irq(pdata->irq_base + muic_irqs[i].irq, info);
+		free_irq(max8997->irq_base + muic_irqs[i].irq, info);
 	cancel_work_sync(&info->irq_work);
 
+	extcon_dev_unregister(info->edev);
+
 	kfree(info);
 
 	return 0;
@@ -479,7 +521,7 @@ static int __devexit max8997_muic_remove(struct platform_device *pdev)
 
 static struct platform_driver max8997_muic_driver = {
 	.driver		= {
-		.name	= "max8997-muic",
+		.name	= DEV_NAME,
 		.owner	= THIS_MODULE,
 	},
 	.probe		= max8997_muic_probe,
@@ -488,6 +530,6 @@ static struct platform_driver max8997_muic_driver = {
 
 module_platform_driver(max8997_muic_driver);
 
-MODULE_DESCRIPTION("Maxim MAX8997 MUIC driver");
+MODULE_DESCRIPTION("Maxim MAX8997 Extcon driver");
 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/extcon/extcon_class.c b/drivers/extcon/extcon_class.c
new file mode 100644
index 00000000000..f598a700ec1
--- /dev/null
+++ b/drivers/extcon/extcon_class.c
@@ -0,0 +1,832 @@
+/*
+ *  drivers/extcon/extcon_class.c
+ *
+ *  External connector (extcon) class driver
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Author: Donggeun Kim <dg77.kim@samsung.com>
+ * Author: MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * based on android/drivers/switch/switch_class.c
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+#include <linux/extcon.h>
+#include <linux/slab.h>
+
+/*
+ * extcon_cable_name suggests the standard cable names for commonly used
+ * cable types.
+ *
+ * However, please do not use extcon_cable_name directly for extcon_dev
+ * struct's supported_cable pointer unless your device really supports
+ * every single port-type of the following cable names. Please choose cable
+ * names that are actually used in your extcon device.
+ */
+const char *extcon_cable_name[] = {
+	[EXTCON_USB]		= "USB",
+	[EXTCON_USB_HOST]	= "USB-Host",
+	[EXTCON_TA]		= "TA",
+	[EXTCON_FAST_CHARGER]	= "Fast-charger",
+	[EXTCON_SLOW_CHARGER]	= "Slow-charger",
+	[EXTCON_CHARGE_DOWNSTREAM]	= "Charge-downstream",
+	[EXTCON_HDMI]		= "HDMI",
+	[EXTCON_MHL]		= "MHL",
+	[EXTCON_DVI]		= "DVI",
+	[EXTCON_VGA]		= "VGA",
+	[EXTCON_DOCK]		= "Dock",
+	[EXTCON_LINE_IN]	= "Line-in",
+	[EXTCON_LINE_OUT]	= "Line-out",
+	[EXTCON_MIC_IN]		= "Microphone",
+	[EXTCON_HEADPHONE_OUT]	= "Headphone",
+	[EXTCON_SPDIF_IN]	= "SPDIF-in",
+	[EXTCON_SPDIF_OUT]	= "SPDIF-out",
+	[EXTCON_VIDEO_IN]	= "Video-in",
+	[EXTCON_VIDEO_OUT]	= "Video-out",
+	[EXTCON_MECHANICAL]	= "Mechanical",
+
+	NULL,
+};
+
+struct class *extcon_class;
+#if defined(CONFIG_ANDROID)
+static struct class_compat *switch_class;
+#endif /* CONFIG_ANDROID */
+
+static LIST_HEAD(extcon_dev_list);
+static DEFINE_MUTEX(extcon_dev_list_lock);
+
+/**
+ * check_mutually_exclusive - Check if new_state violates mutually_exclusive
+ *			    condition.
+ * @edev:	the extcon device
+ * @new_state:	new cable attach status for @edev
+ *
+ * Returns 0 if nothing violates. Returns the index + 1 for the first
+ * violated condition.
+ */
+static int check_mutually_exclusive(struct extcon_dev *edev, u32 new_state)
+{
+	int i = 0;
+
+	if (!edev->mutually_exclusive)
+		return 0;
+
+	for (i = 0; edev->mutually_exclusive[i]; i++) {
+		int count = 0, j;
+		u32 correspondants = new_state & edev->mutually_exclusive[i];
+		u32 exp = 1;
+
+		for (j = 0; j < 32; j++) {
+			if (exp & correspondants)
+				count++;
+			if (count > 1)
+				return i + 1;
+			exp <<= 1;
+		}
+	}
+
+	return 0;
+}
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int i, count = 0;
+	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+
+	if (edev->print_state) {
+		int ret = edev->print_state(edev, buf);
+
+		if (ret >= 0)
+			return ret;
+		/* Use default if failed */
+	}
+
+	if (edev->max_supported == 0)
+		return sprintf(buf, "%u\n", edev->state);
+
+	for (i = 0; i < SUPPORTED_CABLE_MAX; i++) {
+		if (!edev->supported_cable[i])
+			break;
+		count += sprintf(buf + count, "%s=%d\n",
+				 edev->supported_cable[i],
+				 !!(edev->state & (1 << i)));
+	}
+
+	return count;
+}
+
+int extcon_set_state(struct extcon_dev *edev, u32 state);
+static ssize_t state_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	u32 state;
+	ssize_t ret = 0;
+	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+
+	ret = sscanf(buf, "0x%x", &state);
+	if (ret == 0)
+		ret = -EINVAL;
+	else
+		ret = extcon_set_state(edev, state);
+
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static ssize_t name_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+
+	/* Optional callback given by the user */
+	if (edev->print_name) {
+		int ret = edev->print_name(edev, buf);
+		if (ret >= 0)
+			return ret;
+	}
+
+	return sprintf(buf, "%s\n", dev_name(edev->dev));
+}
+
+static ssize_t cable_name_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct extcon_cable *cable = container_of(attr, struct extcon_cable,
+						  attr_name);
+
+	return sprintf(buf, "%s\n",
+		       cable->edev->supported_cable[cable->cable_index]);
+}
+
+static ssize_t cable_state_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct extcon_cable *cable = container_of(attr, struct extcon_cable,
+						  attr_state);
+
+	return sprintf(buf, "%d\n",
+		       extcon_get_cable_state_(cable->edev,
+					       cable->cable_index));
+}
+
+static ssize_t cable_state_store(struct device *dev,
+				 struct device_attribute *attr, const char *buf,
+				 size_t count)
+{
+	struct extcon_cable *cable = container_of(attr, struct extcon_cable,
+						  attr_state);
+	int ret, state;
+
+	ret = sscanf(buf, "%d", &state);
+	if (ret == 0)
+		ret = -EINVAL;
+	else
+		ret = extcon_set_cable_state_(cable->edev, cable->cable_index,
+					      state);
+
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+/**
+ * extcon_update_state() - Update the cable attach states of the extcon device
+ *			only for the masked bits.
+ * @edev:	the extcon device
+ * @mask:	the bit mask to designate updated bits.
+ * @state:	new cable attach status for @edev
+ *
+ * Changing the state sends uevent with environment variable containing
+ * the name of extcon device (envp[0]) and the state output (envp[1]).
+ * Tizen uses this format for extcon device to get events from ports.
+ * Android uses this format as well.
+ *
+ * Note that the notifier provides which bits are changed in the state
+ * variable with the val parameter (second) to the callback.
+ */
+int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
+{
+	char name_buf[120];
+	char state_buf[120];
+	char *prop_buf;
+	char *envp[3];
+	int env_offset = 0;
+	int length;
+	unsigned long flags;
+
+	spin_lock_irqsave(&edev->lock, flags);
+
+	if (edev->state != ((edev->state & ~mask) | (state & mask))) {
+		u32 old_state = edev->state;
+
+		if (check_mutually_exclusive(edev, (edev->state & ~mask) |
+						   (state & mask))) {
+			spin_unlock_irqrestore(&edev->lock, flags);
+			return -EPERM;
+		}
+
+		edev->state &= ~mask;
+		edev->state |= state & mask;
+
+		raw_notifier_call_chain(&edev->nh, old_state, edev);
+
+		/* This could be in interrupt handler */
+		prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
+		if (prop_buf) {
+			length = name_show(edev->dev, NULL, prop_buf);
+			if (length > 0) {
+				if (prop_buf[length - 1] == '\n')
+					prop_buf[length - 1] = 0;
+				snprintf(name_buf, sizeof(name_buf),
+					"NAME=%s", prop_buf);
+				envp[env_offset++] = name_buf;
+			}
+			length = state_show(edev->dev, NULL, prop_buf);
+			if (length > 0) {
+				if (prop_buf[length - 1] == '\n')
+					prop_buf[length - 1] = 0;
+				snprintf(state_buf, sizeof(state_buf),
+					"STATE=%s", prop_buf);
+				envp[env_offset++] = state_buf;
+			}
+			envp[env_offset] = NULL;
+			/* Unlock early before uevent */
+			spin_unlock_irqrestore(&edev->lock, flags);
+
+			kobject_uevent_env(&edev->dev->kobj, KOBJ_CHANGE, envp);
+			free_page((unsigned long)prop_buf);
+		} else {
+			/* Unlock early before uevent */
+			spin_unlock_irqrestore(&edev->lock, flags);
+
+			dev_err(edev->dev, "out of memory in extcon_set_state\n");
+			kobject_uevent(&edev->dev->kobj, KOBJ_CHANGE);
+		}
+	} else {
+		/* No changes */
+		spin_unlock_irqrestore(&edev->lock, flags);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(extcon_update_state);
+
+/**
+ * extcon_set_state() - Set the cable attach states of the extcon device.
+ * @edev:	the extcon device
+ * @state:	new cable attach status for @edev
+ *
+ * Note that notifier provides which bits are changed in the state
+ * variable with the val parameter (second) to the callback.
+ */
+int extcon_set_state(struct extcon_dev *edev, u32 state)
+{
+	return extcon_update_state(edev, 0xffffffff, state);
+}
+EXPORT_SYMBOL_GPL(extcon_set_state);
+
+/**
+ * extcon_find_cable_index() - Get the cable index based on the cable name.
+ * @edev:	the extcon device that has the cable.
+ * @cable_name:	cable name to be searched.
+ *
+ * Note that accessing a cable state based on cable_index is faster than
+ * cable_name because using cable_name induces a loop with strncmp().
+ * Thus, when get/set_cable_state is repeatedly used, using cable_index
+ * is recommended.
+ */
+int extcon_find_cable_index(struct extcon_dev *edev, const char *cable_name)
+{
+	int i;
+
+	if (edev->supported_cable) {
+		for (i = 0; edev->supported_cable[i]; i++) {
+			if (!strncmp(edev->supported_cable[i],
+				cable_name, CABLE_NAME_MAX))
+				return i;
+		}
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(extcon_find_cable_index);
+
+/**
+ * extcon_get_cable_state_() - Get the status of a specific cable.
+ * @edev:	the extcon device that has the cable.
+ * @index:	cable index that can be retrieved by extcon_find_cable_index().
+ */
+int extcon_get_cable_state_(struct extcon_dev *edev, int index)
+{
+	if (index < 0 || (edev->max_supported && edev->max_supported <= index))
+		return -EINVAL;
+
+	return !!(edev->state & (1 << index));
+}
+EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
+
+/**
+ * extcon_get_cable_state() - Get the status of a specific cable.
+ * @edev:	the extcon device that has the cable.
+ * @cable_name:	cable name.
+ *
+ * Note that this is slower than extcon_get_cable_state_.
+ */
+int extcon_get_cable_state(struct extcon_dev *edev, const char *cable_name)
+{
+	return extcon_get_cable_state_(edev, extcon_find_cable_index
+						(edev, cable_name));
+}
+EXPORT_SYMBOL_GPL(extcon_get_cable_state);
+
+/**
+ * extcon_get_cable_state_() - Set the status of a specific cable.
+ * @edev:	the extcon device that has the cable.
+ * @index:	cable index that can be retrieved by extcon_find_cable_index().
+ * @cable_state:	the new cable status. The default semantics is
+ *			true: attached / false: detached.
+ */
+int extcon_set_cable_state_(struct extcon_dev *edev,
+			int index, bool cable_state)
+{
+	u32 state;
+
+	if (index < 0 || (edev->max_supported && edev->max_supported <= index))
+		return -EINVAL;
+
+	state = cable_state ? (1 << index) : 0;
+	return extcon_update_state(edev, 1 << index, state);
+}
+EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
+
+/**
+ * extcon_get_cable_state() - Set the status of a specific cable.
+ * @edev:	the extcon device that has the cable.
+ * @cable_name:	cable name.
+ * @cable_state:	the new cable status. The default semantics is
+ *			true: attached / false: detached.
+ *
+ * Note that this is slower than extcon_set_cable_state_.
+ */
+int extcon_set_cable_state(struct extcon_dev *edev,
+			const char *cable_name, bool cable_state)
+{
+	return extcon_set_cable_state_(edev, extcon_find_cable_index
+					(edev, cable_name), cable_state);
+}
+EXPORT_SYMBOL_GPL(extcon_set_cable_state);
+
+/**
+ * extcon_get_extcon_dev() - Get the extcon device instance from the name
+ * @extcon_name:	The extcon name provided with extcon_dev_register()
+ */
+struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
+{
+	struct extcon_dev *sd;
+
+	mutex_lock(&extcon_dev_list_lock);
+	list_for_each_entry(sd, &extcon_dev_list, entry) {
+		if (!strcmp(sd->name, extcon_name))
+			goto out;
+	}
+	sd = NULL;
+out:
+	mutex_unlock(&extcon_dev_list_lock);
+	return sd;
+}
+EXPORT_SYMBOL_GPL(extcon_get_extcon_dev);
+
+static int _call_per_cable(struct notifier_block *nb, unsigned long val,
+			   void *ptr)
+{
+	struct extcon_specific_cable_nb *obj = container_of(nb,
+			struct extcon_specific_cable_nb, internal_nb);
+	struct extcon_dev *edev = ptr;
+
+	if ((val & (1 << obj->cable_index)) !=
+	    (edev->state & (1 << obj->cable_index))) {
+		bool cable_state = true;
+
+		obj->previous_value = val;
+
+		if (val & (1 << obj->cable_index))
+			cable_state = false;
+
+		return obj->user_nb->notifier_call(obj->user_nb,
+				cable_state, ptr);
+	}
+
+	return NOTIFY_OK;
+}
+
+/**
+ * extcon_register_interest() - Register a notifier for a state change of a
+ *			      specific cable, not a entier set of cables of a
+ *			      extcon device.
+ * @obj:	an empty extcon_specific_cable_nb object to be returned.
+ * @extcon_name:	the name of extcon device.
+ * @cable_name:		the target cable name.
+ * @nb:		the notifier block to get notified.
+ *
+ * Provide an empty extcon_specific_cable_nb. extcon_register_interest() sets
+ * the struct for you.
+ *
+ * extcon_register_interest is a helper function for those who want to get
+ * notification for a single specific cable's status change. If a user wants
+ * to get notification for any changes of all cables of a extcon device,
+ * he/she should use the general extcon_register_notifier().
+ *
+ * Note that the second parameter given to the callback of nb (val) is
+ * "old_state", not the current state. The current state can be retrieved
+ * by looking at the third pameter (edev pointer)'s state value.
+ */
+int extcon_register_interest(struct extcon_specific_cable_nb *obj,
+			     const char *extcon_name, const char *cable_name,
+			     struct notifier_block *nb)
+{
+	if (!obj || !extcon_name || !cable_name || !nb)
+		return -EINVAL;
+
+	obj->edev = extcon_get_extcon_dev(extcon_name);
+	if (!obj->edev)
+		return -ENODEV;
+
+	obj->cable_index = extcon_find_cable_index(obj->edev, cable_name);
+	if (obj->cable_index < 0)
+		return -ENODEV;
+
+	obj->user_nb = nb;
+
+	obj->internal_nb.notifier_call = _call_per_cable;
+
+	return raw_notifier_chain_register(&obj->edev->nh, &obj->internal_nb);
+}
+
+/**
+ * extcon_unregister_interest() - Unregister the notifier registered by
+ *				extcon_register_interest().
+ * @obj:	the extcon_specific_cable_nb object returned by
+ *		extcon_register_interest().
+ */
+int extcon_unregister_interest(struct extcon_specific_cable_nb *obj)
+{
+	if (!obj)
+		return -EINVAL;
+
+	return raw_notifier_chain_unregister(&obj->edev->nh, &obj->internal_nb);
+}
+
+/**
+ * extcon_register_notifier() - Register a notifee to get notified by
+ *			      any attach status changes from the extcon.
+ * @edev:	the extcon device.
+ * @nb:		a notifier block to be registered.
+ *
+ * Note that the second parameter given to the callback of nb (val) is
+ * "old_state", not the current state. The current state can be retrieved
+ * by looking at the third pameter (edev pointer)'s state value.
+ */
+int extcon_register_notifier(struct extcon_dev *edev,
+			struct notifier_block *nb)
+{
+	return raw_notifier_chain_register(&edev->nh, nb);
+}
+EXPORT_SYMBOL_GPL(extcon_register_notifier);
+
+/**
+ * extcon_unregister_notifier() - Unregister a notifee from the extcon device.
+ * @edev:	the extcon device.
+ * @nb:		a registered notifier block to be unregistered.
+ */
+int extcon_unregister_notifier(struct extcon_dev *edev,
+			struct notifier_block *nb)
+{
+	return raw_notifier_chain_unregister(&edev->nh, nb);
+}
+EXPORT_SYMBOL_GPL(extcon_unregister_notifier);
+
+static struct device_attribute extcon_attrs[] = {
+	__ATTR(state, S_IRUGO | S_IWUSR, state_show, state_store),
+	__ATTR_RO(name),
+	__ATTR_NULL,
+};
+
+static int create_extcon_class(void)
+{
+	if (!extcon_class) {
+		extcon_class = class_create(THIS_MODULE, "extcon");
+		if (IS_ERR(extcon_class))
+			return PTR_ERR(extcon_class);
+		extcon_class->dev_attrs = extcon_attrs;
+
+#if defined(CONFIG_ANDROID)
+		switch_class = class_compat_register("switch");
+		if (WARN(!switch_class, "cannot allocate"))
+			return -ENOMEM;
+#endif /* CONFIG_ANDROID */
+	}
+
+	return 0;
+}
+
+static void extcon_cleanup(struct extcon_dev *edev, bool skip)
+{
+	mutex_lock(&extcon_dev_list_lock);
+	list_del(&edev->entry);
+	mutex_unlock(&extcon_dev_list_lock);
+
+	if (!skip && get_device(edev->dev)) {
+		int index;
+
+		if (edev->mutually_exclusive && edev->max_supported) {
+			for (index = 0; edev->mutually_exclusive[index];
+			     index++)
+				kfree(edev->d_attrs_muex[index].attr.name);
+			kfree(edev->d_attrs_muex);
+			kfree(edev->attrs_muex);
+		}
+
+		for (index = 0; index < edev->max_supported; index++)
+			kfree(edev->cables[index].attr_g.name);
+
+		if (edev->max_supported) {
+			kfree(edev->extcon_dev_type.groups);
+			kfree(edev->cables);
+		}
+
+		device_unregister(edev->dev);
+		put_device(edev->dev);
+	}
+
+	kfree(edev->dev);
+}
+
+static void extcon_dev_release(struct device *dev)
+{
+	struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
+
+	extcon_cleanup(edev, true);
+}
+
+static const char *muex_name = "mutually_exclusive";
+static void dummy_sysfs_dev_release(struct device *dev)
+{
+}
+
+/**
+ * extcon_dev_register() - Register a new extcon device
+ * @edev	: the new extcon device (should be allocated before calling)
+ * @dev		: the parent device for this extcon device.
+ *
+ * Among the members of edev struct, please set the "user initializing data"
+ * in any case and set the "optional callbacks" if required. However, please
+ * do not set the values of "internal data", which are initialized by
+ * this function.
+ */
+int extcon_dev_register(struct extcon_dev *edev, struct device *dev)
+{
+	int ret, index = 0;
+
+	if (!extcon_class) {
+		ret = create_extcon_class();
+		if (ret < 0)
+			return ret;
+	}
+
+	if (edev->supported_cable) {
+		/* Get size of array */
+		for (index = 0; edev->supported_cable[index]; index++)
+			;
+		edev->max_supported = index;
+	} else {
+		edev->max_supported = 0;
+	}
+
+	if (index > SUPPORTED_CABLE_MAX) {
+		dev_err(edev->dev, "extcon: maximum number of supported cables exceeded.\n");
+		return -EINVAL;
+	}
+
+	edev->dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+	if (!edev->dev)
+		return -ENOMEM;
+	edev->dev->parent = dev;
+	edev->dev->class = extcon_class;
+	edev->dev->release = extcon_dev_release;
+
+	dev_set_name(edev->dev, edev->name ? edev->name : dev_name(dev));
+
+	if (edev->max_supported) {
+		char buf[10];
+		char *str;
+		struct extcon_cable *cable;
+
+		edev->cables = kzalloc(sizeof(struct extcon_cable) *
+				       edev->max_supported, GFP_KERNEL);
+		if (!edev->cables) {
+			ret = -ENOMEM;
+			goto err_sysfs_alloc;
+		}
+		for (index = 0; index < edev->max_supported; index++) {
+			cable = &edev->cables[index];
+
+			snprintf(buf, 10, "cable.%d", index);
+			str = kzalloc(sizeof(char) * (strlen(buf) + 1),
+				      GFP_KERNEL);
+			if (!str) {
+				for (index--; index >= 0; index--) {
+					cable = &edev->cables[index];
+					kfree(cable->attr_g.name);
+				}
+				ret = -ENOMEM;
+
+				goto err_alloc_cables;
+			}
+			strcpy(str, buf);
+
+			cable->edev = edev;
+			cable->cable_index = index;
+			cable->attrs[0] = &cable->attr_name.attr;
+			cable->attrs[1] = &cable->attr_state.attr;
+			cable->attrs[2] = NULL;
+			cable->attr_g.name = str;
+			cable->attr_g.attrs = cable->attrs;
+
+			cable->attr_name.attr.name = "name";
+			cable->attr_name.attr.mode = 0444;
+			cable->attr_name.show = cable_name_show;
+
+			cable->attr_state.attr.name = "state";
+			cable->attr_state.attr.mode = 0644;
+			cable->attr_state.show = cable_state_show;
+			cable->attr_state.store = cable_state_store;
+		}
+	}
+
+	if (edev->max_supported && edev->mutually_exclusive) {
+		char buf[80];
+		char *name;
+
+		/* Count the size of mutually_exclusive array */
+		for (index = 0; edev->mutually_exclusive[index]; index++)
+			;
+
+		edev->attrs_muex = kzalloc(sizeof(struct attribute *) *
+					   (index + 1), GFP_KERNEL);
+		if (!edev->attrs_muex) {
+			ret = -ENOMEM;
+			goto err_muex;
+		}
+
+		edev->d_attrs_muex = kzalloc(sizeof(struct device_attribute) *
+					     index, GFP_KERNEL);
+		if (!edev->d_attrs_muex) {
+			ret = -ENOMEM;
+			kfree(edev->attrs_muex);
+			goto err_muex;
+		}
+
+		for (index = 0; edev->mutually_exclusive[index]; index++) {
+			sprintf(buf, "0x%x", edev->mutually_exclusive[index]);
+			name = kzalloc(sizeof(char) * (strlen(buf) + 1),
+				       GFP_KERNEL);
+			if (!name) {
+				for (index--; index >= 0; index--) {
+					kfree(edev->d_attrs_muex[index].attr.
+					      name);
+				}
+				kfree(edev->d_attrs_muex);
+				kfree(edev->attrs_muex);
+				ret = -ENOMEM;
+				goto err_muex;
+			}
+			strcpy(name, buf);
+			edev->d_attrs_muex[index].attr.name = name;
+			edev->d_attrs_muex[index].attr.mode = 0000;
+			edev->attrs_muex[index] = &edev->d_attrs_muex[index]
+							.attr;
+		}
+		edev->attr_g_muex.name = muex_name;
+		edev->attr_g_muex.attrs = edev->attrs_muex;
+
+	}
+
+	if (edev->max_supported) {
+		edev->extcon_dev_type.groups =
+			kzalloc(sizeof(struct attribute_group *) *
+				(edev->max_supported + 2), GFP_KERNEL);
+		if (!edev->extcon_dev_type.groups) {
+			ret = -ENOMEM;
+			goto err_alloc_groups;
+		}
+
+		edev->extcon_dev_type.name = dev_name(edev->dev);
+		edev->extcon_dev_type.release = dummy_sysfs_dev_release;
+
+		for (index = 0; index < edev->max_supported; index++)
+			edev->extcon_dev_type.groups[index] =
+				&edev->cables[index].attr_g;
+		if (edev->mutually_exclusive)
+			edev->extcon_dev_type.groups[index] =
+				&edev->attr_g_muex;
+
+		edev->dev->type = &edev->extcon_dev_type;
+	}
+
+	ret = device_register(edev->dev);
+	if (ret) {
+		put_device(edev->dev);
+		goto err_dev;
+	}
+#if defined(CONFIG_ANDROID)
+	if (switch_class)
+		ret = class_compat_create_link(switch_class, edev->dev,
+					       dev);
+#endif /* CONFIG_ANDROID */
+
+	spin_lock_init(&edev->lock);
+
+	RAW_INIT_NOTIFIER_HEAD(&edev->nh);
+
+	dev_set_drvdata(edev->dev, edev);
+	edev->state = 0;
+
+	mutex_lock(&extcon_dev_list_lock);
+	list_add(&edev->entry, &extcon_dev_list);
+	mutex_unlock(&extcon_dev_list_lock);
+
+	return 0;
+
+err_dev:
+	if (edev->max_supported)
+		kfree(edev->extcon_dev_type.groups);
+err_alloc_groups:
+	if (edev->max_supported && edev->mutually_exclusive) {
+		for (index = 0; edev->mutually_exclusive[index]; index++)
+			kfree(edev->d_attrs_muex[index].attr.name);
+		kfree(edev->d_attrs_muex);
+		kfree(edev->attrs_muex);
+	}
+err_muex:
+	for (index = 0; index < edev->max_supported; index++)
+		kfree(edev->cables[index].attr_g.name);
+err_alloc_cables:
+	if (edev->max_supported)
+		kfree(edev->cables);
+err_sysfs_alloc:
+	kfree(edev->dev);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_dev_register);
+
+/**
+ * extcon_dev_unregister() - Unregister the extcon device.
+ * @edev:	the extcon device instance to be unregitered.
+ *
+ * Note that this does not call kfree(edev) because edev was not allocated
+ * by this class.
+ */
+void extcon_dev_unregister(struct extcon_dev *edev)
+{
+	extcon_cleanup(edev, false);
+}
+EXPORT_SYMBOL_GPL(extcon_dev_unregister);
+
+static int __init extcon_class_init(void)
+{
+	return create_extcon_class();
+}
+module_init(extcon_class_init);
+
+static void __exit extcon_class_exit(void)
+{
+	class_destroy(extcon_class);
+}
+module_exit(extcon_class_exit);
+
+MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
+MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_DESCRIPTION("External connector (extcon) class driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/extcon/extcon_gpio.c b/drivers/extcon/extcon_gpio.c
new file mode 100644
index 00000000000..fe7a07b4733
--- /dev/null
+++ b/drivers/extcon/extcon_gpio.c
@@ -0,0 +1,169 @@
+/*
+ *  drivers/extcon/extcon_gpio.c
+ *
+ *  Single-state GPIO extcon driver based on extcon class
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * Modified by MyungJoo Ham <myungjoo.ham@samsung.com> to support extcon
+ * (originally switch class is supported)
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/extcon.h>
+#include <linux/workqueue.h>
+#include <linux/gpio.h>
+#include <linux/extcon.h>
+#include <linux/extcon/extcon_gpio.h>
+
+struct gpio_extcon_data {
+	struct extcon_dev edev;
+	unsigned gpio;
+	const char *state_on;
+	const char *state_off;
+	int irq;
+	struct delayed_work work;
+	unsigned long debounce_jiffies;
+};
+
+static void gpio_extcon_work(struct work_struct *work)
+{
+	int state;
+	struct gpio_extcon_data	*data =
+		container_of(to_delayed_work(work), struct gpio_extcon_data,
+			     work);
+
+	state = gpio_get_value(data->gpio);
+	extcon_set_state(&data->edev, state);
+}
+
+static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+{
+	struct gpio_extcon_data *extcon_data = dev_id;
+
+	schedule_delayed_work(&extcon_data->work,
+			      extcon_data->debounce_jiffies);
+	return IRQ_HANDLED;
+}
+
+static ssize_t extcon_gpio_print_state(struct extcon_dev *edev, char *buf)
+{
+	struct gpio_extcon_data	*extcon_data =
+		container_of(edev, struct gpio_extcon_data, edev);
+	const char *state;
+	if (extcon_get_state(edev))
+		state = extcon_data->state_on;
+	else
+		state = extcon_data->state_off;
+
+	if (state)
+		return sprintf(buf, "%s\n", state);
+	return -EINVAL;
+}
+
+static int __devinit gpio_extcon_probe(struct platform_device *pdev)
+{
+	struct gpio_extcon_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_extcon_data *extcon_data;
+	int ret = 0;
+
+	if (!pdata)
+		return -EBUSY;
+	if (!pdata->irq_flags) {
+		dev_err(&pdev->dev, "IRQ flag is not specified.\n");
+		return -EINVAL;
+	}
+
+	extcon_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
+				   GFP_KERNEL);
+	if (!extcon_data)
+		return -ENOMEM;
+
+	extcon_data->edev.name = pdata->name;
+	extcon_data->gpio = pdata->gpio;
+	extcon_data->state_on = pdata->state_on;
+	extcon_data->state_off = pdata->state_off;
+	if (pdata->state_on && pdata->state_off)
+		extcon_data->edev.print_state = extcon_gpio_print_state;
+	extcon_data->debounce_jiffies = msecs_to_jiffies(pdata->debounce);
+
+	ret = extcon_dev_register(&extcon_data->edev, &pdev->dev);
+	if (ret < 0)
+		goto err_extcon_dev_register;
+
+	ret = gpio_request_one(extcon_data->gpio, GPIOF_DIR_IN, pdev->name);
+	if (ret < 0)
+		goto err_request_gpio;
+
+	INIT_DELAYED_WORK(&extcon_data->work, gpio_extcon_work);
+
+	extcon_data->irq = gpio_to_irq(extcon_data->gpio);
+	if (extcon_data->irq < 0) {
+		ret = extcon_data->irq;
+		goto err_detect_irq_num_failed;
+	}
+
+	ret = request_any_context_irq(extcon_data->irq, gpio_irq_handler,
+				      pdata->irq_flags, pdev->name,
+				      extcon_data);
+	if (ret < 0)
+		goto err_request_irq;
+
+	/* Perform initial detection */
+	gpio_extcon_work(&extcon_data->work.work);
+
+	return 0;
+
+err_request_irq:
+err_detect_irq_num_failed:
+	gpio_free(extcon_data->gpio);
+err_request_gpio:
+	extcon_dev_unregister(&extcon_data->edev);
+err_extcon_dev_register:
+	devm_kfree(&pdev->dev, extcon_data);
+
+	return ret;
+}
+
+static int __devexit gpio_extcon_remove(struct platform_device *pdev)
+{
+	struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&extcon_data->work);
+	gpio_free(extcon_data->gpio);
+	extcon_dev_unregister(&extcon_data->edev);
+	devm_kfree(&pdev->dev, extcon_data);
+
+	return 0;
+}
+
+static struct platform_driver gpio_extcon_driver = {
+	.probe		= gpio_extcon_probe,
+	.remove		= __devexit_p(gpio_extcon_remove),
+	.driver		= {
+		.name	= "extcon-gpio",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(gpio_extcon_driver);
+
+MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
+MODULE_DESCRIPTION("GPIO extcon driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c
index 3dd29399cef..8950f6261bb 100644
--- a/drivers/gpio/devres.c
+++ b/drivers/gpio/devres.c
@@ -83,8 +83,7 @@ EXPORT_SYMBOL(devm_gpio_request);
 void devm_gpio_free(struct device *dev, unsigned int gpio)
 {
 
-	WARN_ON(devres_destroy(dev, devm_gpio_release, devm_gpio_match,
+	WARN_ON(devres_release(dev, devm_gpio_release, devm_gpio_match,
 		&gpio));
-	gpio_free(gpio);
 }
 EXPORT_SYMBOL(devm_gpio_free);
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 9ffbfc575a0..2b8b8d4558d 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -46,40 +46,61 @@ struct vmbus_channel_message_table_entry {
  *
  * @icmsghdrp is of type &struct icmsg_hdr.
  * @negop is of type &struct icmsg_negotiate.
- * Set up and fill in default negotiate response message. This response can
- * come from both the vmbus driver and the hv_utils driver. The current api
- * will respond properly to both Windows 2008 and Windows 2008-R2 operating
- * systems.
+ * Set up and fill in default negotiate response message.
+ *
+ * The max_fw_version specifies the maximum framework version that
+ * we can support and max _srv_version specifies the maximum service
+ * version we can support. A special value MAX_SRV_VER can be
+ * specified to indicate that we can handle the maximum version
+ * exposed by the host.
  *
  * Mainly used by Hyper-V drivers.
  */
 void vmbus_prep_negotiate_resp(struct icmsg_hdr *icmsghdrp,
-			       struct icmsg_negotiate *negop, u8 *buf)
+				struct icmsg_negotiate *negop, u8 *buf,
+				int max_fw_version, int max_srv_version)
 {
-	if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-		icmsghdrp->icmsgsize = 0x10;
-
-		negop = (struct icmsg_negotiate *)&buf[
-			sizeof(struct vmbuspipe_hdr) +
-			sizeof(struct icmsg_hdr)];
-
-		if (negop->icframe_vercnt == 2 &&
-		   negop->icversion_data[1].major == 3) {
-			negop->icversion_data[0].major = 3;
-			negop->icversion_data[0].minor = 0;
-			negop->icversion_data[1].major = 3;
-			negop->icversion_data[1].minor = 0;
-		} else {
-			negop->icversion_data[0].major = 1;
-			negop->icversion_data[0].minor = 0;
-			negop->icversion_data[1].major = 1;
-			negop->icversion_data[1].minor = 0;
-		}
+	int icframe_vercnt;
+	int icmsg_vercnt;
+	int i;
+
+	icmsghdrp->icmsgsize = 0x10;
+
+	negop = (struct icmsg_negotiate *)&buf[
+		sizeof(struct vmbuspipe_hdr) +
+		sizeof(struct icmsg_hdr)];
+
+	icframe_vercnt = negop->icframe_vercnt;
+	icmsg_vercnt = negop->icmsg_vercnt;
+
+	/*
+	 * Select the framework version number we will
+	 * support.
+	 */
+
+	for (i = 0; i < negop->icframe_vercnt; i++) {
+		if (negop->icversion_data[i].major <= max_fw_version)
+			icframe_vercnt = negop->icversion_data[i].major;
+	}
 
-		negop->icframe_vercnt = 1;
-		negop->icmsg_vercnt = 1;
+	for (i = negop->icframe_vercnt;
+		 (i < negop->icframe_vercnt + negop->icmsg_vercnt); i++) {
+		if (negop->icversion_data[i].major <= max_srv_version)
+			icmsg_vercnt = negop->icversion_data[i].major;
 	}
+
+	/*
+	 * Respond with the maximum framework and service
+	 * version numbers we can support.
+	 */
+	negop->icframe_vercnt = 1;
+	negop->icmsg_vercnt = 1;
+	negop->icversion_data[0].major = icframe_vercnt;
+	negop->icversion_data[0].minor = 0;
+	negop->icversion_data[1].major = icmsg_vercnt;
+	negop->icversion_data[1].minor = 0;
 }
+
 EXPORT_SYMBOL_GPL(vmbus_prep_negotiate_resp);
 
 /*
diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c
index 15956bd48b4..86f8885aeb4 100644
--- a/drivers/hv/hv.c
+++ b/drivers/hv/hv.c
@@ -252,7 +252,7 @@ void hv_cleanup(void)
  *
  * This involves a hypercall.
  */
-u16 hv_post_message(union hv_connection_id connection_id,
+int hv_post_message(union hv_connection_id connection_id,
 		  enum hv_message_type message_type,
 		  void *payload, size_t payload_size)
 {
diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c
index 6186025209c..0012eed6d87 100644
--- a/drivers/hv/hv_kvp.c
+++ b/drivers/hv/hv_kvp.c
@@ -394,7 +394,8 @@ void hv_kvp_onchannelcallback(void *context)
 			sizeof(struct vmbuspipe_hdr)];
 
 		if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-			vmbus_prep_negotiate_resp(icmsghdrp, negop, recv_buffer);
+			vmbus_prep_negotiate_resp(icmsghdrp, negop,
+				 recv_buffer, MAX_SRV_VER, MAX_SRV_VER);
 		} else {
 			kvp_msg = (struct hv_kvp_msg *)&recv_buffer[
 				sizeof(struct vmbuspipe_hdr) +
diff --git a/drivers/hv/hv_util.c b/drivers/hv/hv_util.c
index dbb8b8eec21..d3ac6a40118 100644
--- a/drivers/hv/hv_util.c
+++ b/drivers/hv/hv_util.c
@@ -70,7 +70,8 @@ static void shutdown_onchannelcallback(void *context)
 			sizeof(struct vmbuspipe_hdr)];
 
 		if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-			vmbus_prep_negotiate_resp(icmsghdrp, negop, shut_txf_buf);
+			vmbus_prep_negotiate_resp(icmsghdrp, negop,
+					shut_txf_buf, MAX_SRV_VER, MAX_SRV_VER);
 		} else {
 			shutdown_msg =
 				(struct shutdown_msg_data *)&shut_txf_buf[
@@ -195,7 +196,8 @@ static void timesync_onchannelcallback(void *context)
 				sizeof(struct vmbuspipe_hdr)];
 
 		if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-			vmbus_prep_negotiate_resp(icmsghdrp, NULL, time_txf_buf);
+			vmbus_prep_negotiate_resp(icmsghdrp, NULL, time_txf_buf,
+						MAX_SRV_VER, MAX_SRV_VER);
 		} else {
 			timedatap = (struct ictimesync_data *)&time_txf_buf[
 				sizeof(struct vmbuspipe_hdr) +
@@ -234,7 +236,8 @@ static void heartbeat_onchannelcallback(void *context)
 				sizeof(struct vmbuspipe_hdr)];
 
 		if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
-			vmbus_prep_negotiate_resp(icmsghdrp, NULL, hbeat_txf_buf);
+			vmbus_prep_negotiate_resp(icmsghdrp, NULL,
+				hbeat_txf_buf, MAX_SRV_VER, MAX_SRV_VER);
 		} else {
 			heartbeat_msg =
 				(struct heartbeat_msg_data *)&hbeat_txf_buf[
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index 699f0d8e59e..b9426a6592e 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -495,7 +495,7 @@ extern int hv_init(void);
 
 extern void hv_cleanup(void);
 
-extern u16 hv_post_message(union hv_connection_id connection_id,
+extern int hv_post_message(union hv_connection_id connection_id,
 			 enum hv_message_type message_type,
 			 void *payload, size_t payload_size);
 
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
new file mode 100644
index 00000000000..067f31174a0
--- /dev/null
+++ b/drivers/memory/Kconfig
@@ -0,0 +1,43 @@
+#
+# Memory devices
+#
+
+menuconfig MEMORY
+	bool "Memory Controller drivers"
+
+if MEMORY
+
+config TI_EMIF
+	tristate "Texas Instruments EMIF driver"
+	depends on ARCH_OMAP2PLUS
+	select DDR
+	help
+	  This driver is for the EMIF module available in Texas Instruments
+	  SoCs. EMIF is an SDRAM controller that, based on its revision,
+	  supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
+	  This driver takes care of only LPDDR2 memories presently. The
+	  functions of the driver includes re-configuring AC timing
+	  parameters and other settings during frequency, voltage and
+	  temperature changes
+
+config TEGRA20_MC
+	bool "Tegra20 Memory Controller(MC) driver"
+	default y
+	depends on ARCH_TEGRA_2x_SOC
+	help
+	  This driver is for the Memory Controller(MC) module available
+	  in Tegra20 SoCs, mainly for a address translation fault
+	  analysis, especially for IOMMU/GART(Graphics Address
+	  Relocation Table) module.
+
+config TEGRA30_MC
+	bool "Tegra30 Memory Controller(MC) driver"
+	default y
+	depends on ARCH_TEGRA_3x_SOC
+	help
+	  This driver is for the Memory Controller(MC) module available
+	  in Tegra30 SoCs, mainly for a address translation fault
+	  analysis, especially for IOMMU/SMMU(System Memory Management
+	  Unit) module.
+
+endif
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
new file mode 100644
index 00000000000..42b3ce9d80f
--- /dev/null
+++ b/drivers/memory/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for memory devices
+#
+
+obj-$(CONFIG_TI_EMIF)		+= emif.o
+obj-$(CONFIG_TEGRA20_MC)	+= tegra20-mc.o
+obj-$(CONFIG_TEGRA30_MC)	+= tegra30-mc.o
diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
new file mode 100644
index 00000000000..33a4396b24c
--- /dev/null
+++ b/drivers/memory/emif.c
@@ -0,0 +1,1670 @@
+/*
+ * EMIF driver
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * Aneesh V <aneesh@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/platform_data/emif_plat.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <memory/jedec_ddr.h>
+#include "emif.h"
+
+/**
+ * struct emif_data - Per device static data for driver's use
+ * @duplicate:			Whether the DDR devices attached to this EMIF
+ *				instance are exactly same as that on EMIF1. In
+ *				this case we can save some memory and processing
+ * @temperature_level:		Maximum temperature of LPDDR2 devices attached
+ *				to this EMIF - read from MR4 register. If there
+ *				are two devices attached to this EMIF, this
+ *				value is the maximum of the two temperature
+ *				levels.
+ * @node:			node in the device list
+ * @base:			base address of memory-mapped IO registers.
+ * @dev:			device pointer.
+ * @addressing			table with addressing information from the spec
+ * @regs_cache:			An array of 'struct emif_regs' that stores
+ *				calculated register values for different
+ *				frequencies, to avoid re-calculating them on
+ *				each DVFS transition.
+ * @curr_regs:			The set of register values used in the last
+ *				frequency change (i.e. corresponding to the
+ *				frequency in effect at the moment)
+ * @plat_data:			Pointer to saved platform data.
+ * @debugfs_root:		dentry to the root folder for EMIF in debugfs
+ */
+struct emif_data {
+	u8				duplicate;
+	u8				temperature_level;
+	u8				lpmode;
+	struct list_head		node;
+	unsigned long			irq_state;
+	void __iomem			*base;
+	struct device			*dev;
+	const struct lpddr2_addressing	*addressing;
+	struct emif_regs		*regs_cache[EMIF_MAX_NUM_FREQUENCIES];
+	struct emif_regs		*curr_regs;
+	struct emif_platform_data	*plat_data;
+	struct dentry			*debugfs_root;
+};
+
+static struct emif_data *emif1;
+static spinlock_t	emif_lock;
+static unsigned long	irq_state;
+static u32		t_ck; /* DDR clock period in ps */
+static LIST_HEAD(device_list);
+
+static void do_emif_regdump_show(struct seq_file *s, struct emif_data *emif,
+	struct emif_regs *regs)
+{
+	u32 type = emif->plat_data->device_info->type;
+	u32 ip_rev = emif->plat_data->ip_rev;
+
+	seq_printf(s, "EMIF register cache dump for %dMHz\n",
+		regs->freq/1000000);
+
+	seq_printf(s, "ref_ctrl_shdw\t: 0x%08x\n", regs->ref_ctrl_shdw);
+	seq_printf(s, "sdram_tim1_shdw\t: 0x%08x\n", regs->sdram_tim1_shdw);
+	seq_printf(s, "sdram_tim2_shdw\t: 0x%08x\n", regs->sdram_tim2_shdw);
+	seq_printf(s, "sdram_tim3_shdw\t: 0x%08x\n", regs->sdram_tim3_shdw);
+
+	if (ip_rev == EMIF_4D) {
+		seq_printf(s, "read_idle_ctrl_shdw_normal\t: 0x%08x\n",
+			regs->read_idle_ctrl_shdw_normal);
+		seq_printf(s, "read_idle_ctrl_shdw_volt_ramp\t: 0x%08x\n",
+			regs->read_idle_ctrl_shdw_volt_ramp);
+	} else if (ip_rev == EMIF_4D5) {
+		seq_printf(s, "dll_calib_ctrl_shdw_normal\t: 0x%08x\n",
+			regs->dll_calib_ctrl_shdw_normal);
+		seq_printf(s, "dll_calib_ctrl_shdw_volt_ramp\t: 0x%08x\n",
+			regs->dll_calib_ctrl_shdw_volt_ramp);
+	}
+
+	if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4) {
+		seq_printf(s, "ref_ctrl_shdw_derated\t: 0x%08x\n",
+			regs->ref_ctrl_shdw_derated);
+		seq_printf(s, "sdram_tim1_shdw_derated\t: 0x%08x\n",
+			regs->sdram_tim1_shdw_derated);
+		seq_printf(s, "sdram_tim3_shdw_derated\t: 0x%08x\n",
+			regs->sdram_tim3_shdw_derated);
+	}
+}
+
+static int emif_regdump_show(struct seq_file *s, void *unused)
+{
+	struct emif_data	*emif	= s->private;
+	struct emif_regs	**regs_cache;
+	int			i;
+
+	if (emif->duplicate)
+		regs_cache = emif1->regs_cache;
+	else
+		regs_cache = emif->regs_cache;
+
+	for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++) {
+		do_emif_regdump_show(s, emif, regs_cache[i]);
+		seq_printf(s, "\n");
+	}
+
+	return 0;
+}
+
+static int emif_regdump_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, emif_regdump_show, inode->i_private);
+}
+
+static const struct file_operations emif_regdump_fops = {
+	.open			= emif_regdump_open,
+	.read			= seq_read,
+	.release		= single_release,
+};
+
+static int emif_mr4_show(struct seq_file *s, void *unused)
+{
+	struct emif_data *emif = s->private;
+
+	seq_printf(s, "MR4=%d\n", emif->temperature_level);
+	return 0;
+}
+
+static int emif_mr4_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, emif_mr4_show, inode->i_private);
+}
+
+static const struct file_operations emif_mr4_fops = {
+	.open			= emif_mr4_open,
+	.read			= seq_read,
+	.release		= single_release,
+};
+
+static int __init_or_module emif_debugfs_init(struct emif_data *emif)
+{
+	struct dentry	*dentry;
+	int		ret;
+
+	dentry = debugfs_create_dir(dev_name(emif->dev), NULL);
+	if (IS_ERR(dentry)) {
+		ret = PTR_ERR(dentry);
+		goto err0;
+	}
+	emif->debugfs_root = dentry;
+
+	dentry = debugfs_create_file("regcache_dump", S_IRUGO,
+			emif->debugfs_root, emif, &emif_regdump_fops);
+	if (IS_ERR(dentry)) {
+		ret = PTR_ERR(dentry);
+		goto err1;
+	}
+
+	dentry = debugfs_create_file("mr4", S_IRUGO,
+			emif->debugfs_root, emif, &emif_mr4_fops);
+	if (IS_ERR(dentry)) {
+		ret = PTR_ERR(dentry);
+		goto err1;
+	}
+
+	return 0;
+err1:
+	debugfs_remove_recursive(emif->debugfs_root);
+err0:
+	return ret;
+}
+
+static void __exit emif_debugfs_exit(struct emif_data *emif)
+{
+	debugfs_remove_recursive(emif->debugfs_root);
+	emif->debugfs_root = NULL;
+}
+
+/*
+ * Calculate the period of DDR clock from frequency value
+ */
+static void set_ddr_clk_period(u32 freq)
+{
+	/* Divide 10^12 by frequency to get period in ps */
+	t_ck = (u32)DIV_ROUND_UP_ULL(1000000000000ull, freq);
+}
+
+/*
+ * Get bus width used by EMIF. Note that this may be different from the
+ * bus width of the DDR devices used. For instance two 16-bit DDR devices
+ * may be connected to a given CS of EMIF. In this case bus width as far
+ * as EMIF is concerned is 32, where as the DDR bus width is 16 bits.
+ */
+static u32 get_emif_bus_width(struct emif_data *emif)
+{
+	u32		width;
+	void __iomem	*base = emif->base;
+
+	width = (readl(base + EMIF_SDRAM_CONFIG) & NARROW_MODE_MASK)
+			>> NARROW_MODE_SHIFT;
+	width = width == 0 ? 32 : 16;
+
+	return width;
+}
+
+/*
+ * Get the CL from SDRAM_CONFIG register
+ */
+static u32 get_cl(struct emif_data *emif)
+{
+	u32		cl;
+	void __iomem	*base = emif->base;
+
+	cl = (readl(base + EMIF_SDRAM_CONFIG) & CL_MASK) >> CL_SHIFT;
+
+	return cl;
+}
+
+static void set_lpmode(struct emif_data *emif, u8 lpmode)
+{
+	u32 temp;
+	void __iomem *base = emif->base;
+
+	temp = readl(base + EMIF_POWER_MANAGEMENT_CONTROL);
+	temp &= ~LP_MODE_MASK;
+	temp |= (lpmode << LP_MODE_SHIFT);
+	writel(temp, base + EMIF_POWER_MANAGEMENT_CONTROL);
+}
+
+static void do_freq_update(void)
+{
+	struct emif_data *emif;
+
+	/*
+	 * Workaround for errata i728: Disable LPMODE during FREQ_UPDATE
+	 *
+	 * i728 DESCRIPTION:
+	 * The EMIF automatically puts the SDRAM into self-refresh mode
+	 * after the EMIF has not performed accesses during
+	 * EMIF_PWR_MGMT_CTRL[7:4] REG_SR_TIM number of DDR clock cycles
+	 * and the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field is set
+	 * to 0x2. If during a small window the following three events
+	 * occur:
+	 * - The SR_TIMING counter expires
+	 * - And frequency change is requested
+	 * - And OCP access is requested
+	 * Then it causes instable clock on the DDR interface.
+	 *
+	 * WORKAROUND
+	 * To avoid the occurrence of the three events, the workaround
+	 * is to disable the self-refresh when requesting a frequency
+	 * change. Before requesting a frequency change the software must
+	 * program EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE to 0x0. When the
+	 * frequency change has been done, the software can reprogram
+	 * EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE to 0x2
+	 */
+	list_for_each_entry(emif, &device_list, node) {
+		if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
+			set_lpmode(emif, EMIF_LP_MODE_DISABLE);
+	}
+
+	/*
+	 * TODO: Do FREQ_UPDATE here when an API
+	 * is available for this as part of the new
+	 * clock framework
+	 */
+
+	list_for_each_entry(emif, &device_list, node) {
+		if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
+			set_lpmode(emif, EMIF_LP_MODE_SELF_REFRESH);
+	}
+}
+
+/* Find addressing table entry based on the device's type and density */
+static const struct lpddr2_addressing *get_addressing_table(
+	const struct ddr_device_info *device_info)
+{
+	u32		index, type, density;
+
+	type = device_info->type;
+	density = device_info->density;
+
+	switch (type) {
+	case DDR_TYPE_LPDDR2_S4:
+		index = density - 1;
+		break;
+	case DDR_TYPE_LPDDR2_S2:
+		switch (density) {
+		case DDR_DENSITY_1Gb:
+		case DDR_DENSITY_2Gb:
+			index = density + 3;
+			break;
+		default:
+			index = density - 1;
+		}
+		break;
+	default:
+		return NULL;
+	}
+
+	return &lpddr2_jedec_addressing_table[index];
+}
+
+/*
+ * Find the the right timing table from the array of timing
+ * tables of the device using DDR clock frequency
+ */
+static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
+		u32 freq)
+{
+	u32				i, min, max, freq_nearest;
+	const struct lpddr2_timings	*timings = NULL;
+	const struct lpddr2_timings	*timings_arr = emif->plat_data->timings;
+	struct				device *dev = emif->dev;
+
+	/* Start with a very high frequency - 1GHz */
+	freq_nearest = 1000000000;
+
+	/*
+	 * Find the timings table such that:
+	 *  1. the frequency range covers the required frequency(safe) AND
+	 *  2. the max_freq is closest to the required frequency(optimal)
+	 */
+	for (i = 0; i < emif->plat_data->timings_arr_size; i++) {
+		max = timings_arr[i].max_freq;
+		min = timings_arr[i].min_freq;
+		if ((freq >= min) && (freq <= max) && (max < freq_nearest)) {
+			freq_nearest = max;
+			timings = &timings_arr[i];
+		}
+	}
+
+	if (!timings)
+		dev_err(dev, "%s: couldn't find timings for - %dHz\n",
+			__func__, freq);
+
+	dev_dbg(dev, "%s: timings table: freq %d, speed bin freq %d\n",
+		__func__, freq, freq_nearest);
+
+	return timings;
+}
+
+static u32 get_sdram_ref_ctrl_shdw(u32 freq,
+		const struct lpddr2_addressing *addressing)
+{
+	u32 ref_ctrl_shdw = 0, val = 0, freq_khz, t_refi;
+
+	/* Scale down frequency and t_refi to avoid overflow */
+	freq_khz = freq / 1000;
+	t_refi = addressing->tREFI_ns / 100;
+
+	/*
+	 * refresh rate to be set is 'tREFI(in us) * freq in MHz
+	 * division by 10000 to account for change in units
+	 */
+	val = t_refi * freq_khz / 10000;
+	ref_ctrl_shdw |= val << REFRESH_RATE_SHIFT;
+
+	return ref_ctrl_shdw;
+}
+
+static u32 get_sdram_tim_1_shdw(const struct lpddr2_timings *timings,
+		const struct lpddr2_min_tck *min_tck,
+		const struct lpddr2_addressing *addressing)
+{
+	u32 tim1 = 0, val = 0;
+
+	val = max(min_tck->tWTR, DIV_ROUND_UP(timings->tWTR, t_ck)) - 1;
+	tim1 |= val << T_WTR_SHIFT;
+
+	if (addressing->num_banks == B8)
+		val = DIV_ROUND_UP(timings->tFAW, t_ck*4);
+	else
+		val = max(min_tck->tRRD, DIV_ROUND_UP(timings->tRRD, t_ck));
+	tim1 |= (val - 1) << T_RRD_SHIFT;
+
+	val = DIV_ROUND_UP(timings->tRAS_min + timings->tRPab, t_ck) - 1;
+	tim1 |= val << T_RC_SHIFT;
+
+	val = max(min_tck->tRASmin, DIV_ROUND_UP(timings->tRAS_min, t_ck));
+	tim1 |= (val - 1) << T_RAS_SHIFT;
+
+	val = max(min_tck->tWR, DIV_ROUND_UP(timings->tWR, t_ck)) - 1;
+	tim1 |= val << T_WR_SHIFT;
+
+	val = max(min_tck->tRCD, DIV_ROUND_UP(timings->tRCD, t_ck)) - 1;
+	tim1 |= val << T_RCD_SHIFT;
+
+	val = max(min_tck->tRPab, DIV_ROUND_UP(timings->tRPab, t_ck)) - 1;
+	tim1 |= val << T_RP_SHIFT;
+
+	return tim1;
+}
+
+static u32 get_sdram_tim_1_shdw_derated(const struct lpddr2_timings *timings,
+		const struct lpddr2_min_tck *min_tck,
+		const struct lpddr2_addressing *addressing)
+{
+	u32 tim1 = 0, val = 0;
+
+	val = max(min_tck->tWTR, DIV_ROUND_UP(timings->tWTR, t_ck)) - 1;
+	tim1 = val << T_WTR_SHIFT;
+
+	/*
+	 * tFAW is approximately 4 times tRRD. So add 1875*4 = 7500ps
+	 * to tFAW for de-rating
+	 */
+	if (addressing->num_banks == B8) {
+		val = DIV_ROUND_UP(timings->tFAW + 7500, 4 * t_ck) - 1;
+	} else {
+		val = DIV_ROUND_UP(timings->tRRD + 1875, t_ck);
+		val = max(min_tck->tRRD, val) - 1;
+	}
+	tim1 |= val << T_RRD_SHIFT;
+
+	val = DIV_ROUND_UP(timings->tRAS_min + timings->tRPab + 1875, t_ck);
+	tim1 |= (val - 1) << T_RC_SHIFT;
+
+	val = DIV_ROUND_UP(timings->tRAS_min + 1875, t_ck);
+	val = max(min_tck->tRASmin, val) - 1;
+	tim1 |= val << T_RAS_SHIFT;
+
+	val = max(min_tck->tWR, DIV_ROUND_UP(timings->tWR, t_ck)) - 1;
+	tim1 |= val << T_WR_SHIFT;
+
+	val = max(min_tck->tRCD, DIV_ROUND_UP(timings->tRCD + 1875, t_ck));
+	tim1 |= (val - 1) << T_RCD_SHIFT;
+
+	val = max(min_tck->tRPab, DIV_ROUND_UP(timings->tRPab + 1875, t_ck));
+	tim1 |= (val - 1) << T_RP_SHIFT;
+
+	return tim1;
+}
+
+static u32 get_sdram_tim_2_shdw(const struct lpddr2_timings *timings,
+		const struct lpddr2_min_tck *min_tck,
+		const struct lpddr2_addressing *addressing,
+		u32 type)
+{
+	u32 tim2 = 0, val = 0;
+
+	val = min_tck->tCKE - 1;
+	tim2 |= val << T_CKE_SHIFT;
+
+	val = max(min_tck->tRTP, DIV_ROUND_UP(timings->tRTP, t_ck)) - 1;
+	tim2 |= val << T_RTP_SHIFT;
+
+	/* tXSNR = tRFCab_ps + 10 ns(tRFCab_ps for LPDDR2). */
+	val = DIV_ROUND_UP(addressing->tRFCab_ps + 10000, t_ck) - 1;
+	tim2 |= val << T_XSNR_SHIFT;
+
+	/* XSRD same as XSNR for LPDDR2 */
+	tim2 |= val << T_XSRD_SHIFT;
+
+	val = max(min_tck->tXP, DIV_ROUND_UP(timings->tXP, t_ck)) - 1;
+	tim2 |= val << T_XP_SHIFT;
+
+	return tim2;
+}
+
+static u32 get_sdram_tim_3_shdw(const struct lpddr2_timings *timings,
+		const struct lpddr2_min_tck *min_tck,
+		const struct lpddr2_addressing *addressing,
+		u32 type, u32 ip_rev, u32 derated)
+{
+	u32 tim3 = 0, val = 0, t_dqsck;
+
+	val = timings->tRAS_max_ns / addressing->tREFI_ns - 1;
+	val = val > 0xF ? 0xF : val;
+	tim3 |= val << T_RAS_MAX_SHIFT;
+
+	val = DIV_ROUND_UP(addressing->tRFCab_ps, t_ck) - 1;
+	tim3 |= val << T_RFC_SHIFT;
+
+	t_dqsck = (derated == EMIF_DERATED_TIMINGS) ?
+		timings->tDQSCK_max_derated : timings->tDQSCK_max;
+	if (ip_rev == EMIF_4D5)
+		val = DIV_ROUND_UP(t_dqsck + 1000, t_ck) - 1;
+	else
+		val = DIV_ROUND_UP(t_dqsck, t_ck) - 1;
+
+	tim3 |= val << T_TDQSCKMAX_SHIFT;
+
+	val = DIV_ROUND_UP(timings->tZQCS, t_ck) - 1;
+	tim3 |= val << ZQ_ZQCS_SHIFT;
+
+	val = DIV_ROUND_UP(timings->tCKESR, t_ck);
+	val = max(min_tck->tCKESR, val) - 1;
+	tim3 |= val << T_CKESR_SHIFT;
+
+	if (ip_rev == EMIF_4D5) {
+		tim3 |= (EMIF_T_CSTA - 1) << T_CSTA_SHIFT;
+
+		val = DIV_ROUND_UP(EMIF_T_PDLL_UL, 128) - 1;
+		tim3 |= val << T_PDLL_UL_SHIFT;
+	}
+
+	return tim3;
+}
+
+static u32 get_zq_config_reg(const struct lpddr2_addressing *addressing,
+		bool cs1_used, bool cal_resistors_per_cs)
+{
+	u32 zq = 0, val = 0;
+
+	val = EMIF_ZQCS_INTERVAL_US * 1000 / addressing->tREFI_ns;
+	zq |= val << ZQ_REFINTERVAL_SHIFT;
+
+	val = DIV_ROUND_UP(T_ZQCL_DEFAULT_NS, T_ZQCS_DEFAULT_NS) - 1;
+	zq |= val << ZQ_ZQCL_MULT_SHIFT;
+
+	val = DIV_ROUND_UP(T_ZQINIT_DEFAULT_NS, T_ZQCL_DEFAULT_NS) - 1;
+	zq |= val << ZQ_ZQINIT_MULT_SHIFT;
+
+	zq |= ZQ_SFEXITEN_ENABLE << ZQ_SFEXITEN_SHIFT;
+
+	if (cal_resistors_per_cs)
+		zq |= ZQ_DUALCALEN_ENABLE << ZQ_DUALCALEN_SHIFT;
+	else
+		zq |= ZQ_DUALCALEN_DISABLE << ZQ_DUALCALEN_SHIFT;
+
+	zq |= ZQ_CS0EN_MASK; /* CS0 is used for sure */
+
+	val = cs1_used ? 1 : 0;
+	zq |= val << ZQ_CS1EN_SHIFT;
+
+	return zq;
+}
+
+static u32 get_temp_alert_config(const struct lpddr2_addressing *addressing,
+		const struct emif_custom_configs *custom_configs, bool cs1_used,
+		u32 sdram_io_width, u32 emif_bus_width)
+{
+	u32 alert = 0, interval, devcnt;
+
+	if (custom_configs && (custom_configs->mask &
+				EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL))
+		interval = custom_configs->temp_alert_poll_interval_ms;
+	else
+		interval = TEMP_ALERT_POLL_INTERVAL_DEFAULT_MS;
+
+	interval *= 1000000;			/* Convert to ns */
+	interval /= addressing->tREFI_ns;	/* Convert to refresh cycles */
+	alert |= (interval << TA_REFINTERVAL_SHIFT);
+
+	/*
+	 * sdram_io_width is in 'log2(x) - 1' form. Convert emif_bus_width
+	 * also to this form and subtract to get TA_DEVCNT, which is
+	 * in log2(x) form.
+	 */
+	emif_bus_width = __fls(emif_bus_width) - 1;
+	devcnt = emif_bus_width - sdram_io_width;
+	alert |= devcnt << TA_DEVCNT_SHIFT;
+
+	/* DEVWDT is in 'log2(x) - 3' form */
+	alert |= (sdram_io_width - 2) << TA_DEVWDT_SHIFT;
+
+	alert |= 1 << TA_SFEXITEN_SHIFT;
+	alert |= 1 << TA_CS0EN_SHIFT;
+	alert |= (cs1_used ? 1 : 0) << TA_CS1EN_SHIFT;
+
+	return alert;
+}
+
+static u32 get_read_idle_ctrl_shdw(u8 volt_ramp)
+{
+	u32 idle = 0, val = 0;
+
+	/*
+	 * Maximum value in normal conditions and increased frequency
+	 * when voltage is ramping
+	 */
+	if (volt_ramp)
+		val = READ_IDLE_INTERVAL_DVFS / t_ck / 64 - 1;
+	else
+		val = 0x1FF;
+
+	/*
+	 * READ_IDLE_CTRL register in EMIF4D has same offset and fields
+	 * as DLL_CALIB_CTRL in EMIF4D5, so use the same shifts
+	 */
+	idle |= val << DLL_CALIB_INTERVAL_SHIFT;
+	idle |= EMIF_READ_IDLE_LEN_VAL << ACK_WAIT_SHIFT;
+
+	return idle;
+}
+
+static u32 get_dll_calib_ctrl_shdw(u8 volt_ramp)
+{
+	u32 calib = 0, val = 0;
+
+	if (volt_ramp == DDR_VOLTAGE_RAMPING)
+		val = DLL_CALIB_INTERVAL_DVFS / t_ck / 16 - 1;
+	else
+		val = 0; /* Disabled when voltage is stable */
+
+	calib |= val << DLL_CALIB_INTERVAL_SHIFT;
+	calib |= DLL_CALIB_ACK_WAIT_VAL << ACK_WAIT_SHIFT;
+
+	return calib;
+}
+
+static u32 get_ddr_phy_ctrl_1_attilaphy_4d(const struct lpddr2_timings *timings,
+	u32 freq, u8 RL)
+{
+	u32 phy = EMIF_DDR_PHY_CTRL_1_BASE_VAL_ATTILAPHY, val = 0;
+
+	val = RL + DIV_ROUND_UP(timings->tDQSCK_max, t_ck) - 1;
+	phy |= val << READ_LATENCY_SHIFT_4D;
+
+	if (freq <= 100000000)
+		val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY;
+	else if (freq <= 200000000)
+		val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ_ATTILAPHY;
+	else
+		val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ_ATTILAPHY;
+
+	phy |= val << DLL_SLAVE_DLY_CTRL_SHIFT_4D;
+
+	return phy;
+}
+
+static u32 get_phy_ctrl_1_intelliphy_4d5(u32 freq, u8 cl)
+{
+	u32 phy = EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY, half_delay;
+
+	/*
+	 * DLL operates at 266 MHz. If DDR frequency is near 266 MHz,
+	 * half-delay is not needed else set half-delay
+	 */
+	if (freq >= 265000000 && freq < 267000000)
+		half_delay = 0;
+	else
+		half_delay = 1;
+
+	phy |= half_delay << DLL_HALF_DELAY_SHIFT_4D5;
+	phy |= ((cl + DIV_ROUND_UP(EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS,
+			t_ck) - 1) << READ_LATENCY_SHIFT_4D5);
+
+	return phy;
+}
+
+static u32 get_ext_phy_ctrl_2_intelliphy_4d5(void)
+{
+	u32 fifo_we_slave_ratio;
+
+	fifo_we_slave_ratio =  DIV_ROUND_CLOSEST(
+		EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
+
+	return fifo_we_slave_ratio | fifo_we_slave_ratio << 11 |
+		fifo_we_slave_ratio << 22;
+}
+
+static u32 get_ext_phy_ctrl_3_intelliphy_4d5(void)
+{
+	u32 fifo_we_slave_ratio;
+
+	fifo_we_slave_ratio =  DIV_ROUND_CLOSEST(
+		EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
+
+	return fifo_we_slave_ratio >> 10 | fifo_we_slave_ratio << 1 |
+		fifo_we_slave_ratio << 12 | fifo_we_slave_ratio << 23;
+}
+
+static u32 get_ext_phy_ctrl_4_intelliphy_4d5(void)
+{
+	u32 fifo_we_slave_ratio;
+
+	fifo_we_slave_ratio =  DIV_ROUND_CLOSEST(
+		EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
+
+	return fifo_we_slave_ratio >> 9 | fifo_we_slave_ratio << 2 |
+		fifo_we_slave_ratio << 13;
+}
+
+static u32 get_pwr_mgmt_ctrl(u32 freq, struct emif_data *emif, u32 ip_rev)
+{
+	u32 pwr_mgmt_ctrl	= 0, timeout;
+	u32 lpmode		= EMIF_LP_MODE_SELF_REFRESH;
+	u32 timeout_perf	= EMIF_LP_MODE_TIMEOUT_PERFORMANCE;
+	u32 timeout_pwr		= EMIF_LP_MODE_TIMEOUT_POWER;
+	u32 freq_threshold	= EMIF_LP_MODE_FREQ_THRESHOLD;
+
+	struct emif_custom_configs *cust_cfgs = emif->plat_data->custom_configs;
+
+	if (cust_cfgs && (cust_cfgs->mask & EMIF_CUSTOM_CONFIG_LPMODE)) {
+		lpmode		= cust_cfgs->lpmode;
+		timeout_perf	= cust_cfgs->lpmode_timeout_performance;
+		timeout_pwr	= cust_cfgs->lpmode_timeout_power;
+		freq_threshold  = cust_cfgs->lpmode_freq_threshold;
+	}
+
+	/* Timeout based on DDR frequency */
+	timeout = freq >= freq_threshold ? timeout_perf : timeout_pwr;
+
+	/* The value to be set in register is "log2(timeout) - 3" */
+	if (timeout < 16) {
+		timeout = 0;
+	} else {
+		timeout = __fls(timeout) - 3;
+		if (timeout & (timeout - 1))
+			timeout++;
+	}
+
+	switch (lpmode) {
+	case EMIF_LP_MODE_CLOCK_STOP:
+		pwr_mgmt_ctrl = (timeout << CS_TIM_SHIFT) |
+					SR_TIM_MASK | PD_TIM_MASK;
+		break;
+	case EMIF_LP_MODE_SELF_REFRESH:
+		/* Workaround for errata i735 */
+		if (timeout < 6)
+			timeout = 6;
+
+		pwr_mgmt_ctrl = (timeout << SR_TIM_SHIFT) |
+					CS_TIM_MASK | PD_TIM_MASK;
+		break;
+	case EMIF_LP_MODE_PWR_DN:
+		pwr_mgmt_ctrl = (timeout << PD_TIM_SHIFT) |
+					CS_TIM_MASK | SR_TIM_MASK;
+		break;
+	case EMIF_LP_MODE_DISABLE:
+	default:
+		pwr_mgmt_ctrl = CS_TIM_MASK |
+					PD_TIM_MASK | SR_TIM_MASK;
+	}
+
+	/* No CS_TIM in EMIF_4D5 */
+	if (ip_rev == EMIF_4D5)
+		pwr_mgmt_ctrl &= ~CS_TIM_MASK;
+
+	pwr_mgmt_ctrl |= lpmode << LP_MODE_SHIFT;
+
+	return pwr_mgmt_ctrl;
+}
+
+/*
+ * Get the temperature level of the EMIF instance:
+ * Reads the MR4 register of attached SDRAM parts to find out the temperature
+ * level. If there are two parts attached(one on each CS), then the temperature
+ * level for the EMIF instance is the higher of the two temperatures.
+ */
+static void get_temperature_level(struct emif_data *emif)
+{
+	u32		temp, temperature_level;
+	void __iomem	*base;
+
+	base = emif->base;
+
+	/* Read mode register 4 */
+	writel(DDR_MR4, base + EMIF_LPDDR2_MODE_REG_CONFIG);
+	temperature_level = readl(base + EMIF_LPDDR2_MODE_REG_DATA);
+	temperature_level = (temperature_level & MR4_SDRAM_REF_RATE_MASK) >>
+				MR4_SDRAM_REF_RATE_SHIFT;
+
+	if (emif->plat_data->device_info->cs1_used) {
+		writel(DDR_MR4 | CS_MASK, base + EMIF_LPDDR2_MODE_REG_CONFIG);
+		temp = readl(base + EMIF_LPDDR2_MODE_REG_DATA);
+		temp = (temp & MR4_SDRAM_REF_RATE_MASK)
+				>> MR4_SDRAM_REF_RATE_SHIFT;
+		temperature_level = max(temp, temperature_level);
+	}
+
+	/* treat everything less than nominal(3) in MR4 as nominal */
+	if (unlikely(temperature_level < SDRAM_TEMP_NOMINAL))
+		temperature_level = SDRAM_TEMP_NOMINAL;
+
+	/* if we get reserved value in MR4 persist with the existing value */
+	if (likely(temperature_level != SDRAM_TEMP_RESERVED_4))
+		emif->temperature_level = temperature_level;
+}
+
+/*
+ * Program EMIF shadow registers that are not dependent on temperature
+ * or voltage
+ */
+static void setup_registers(struct emif_data *emif, struct emif_regs *regs)
+{
+	void __iomem	*base = emif->base;
+
+	writel(regs->sdram_tim2_shdw, base + EMIF_SDRAM_TIMING_2_SHDW);
+	writel(regs->phy_ctrl_1_shdw, base + EMIF_DDR_PHY_CTRL_1_SHDW);
+
+	/* Settings specific for EMIF4D5 */
+	if (emif->plat_data->ip_rev != EMIF_4D5)
+		return;
+	writel(regs->ext_phy_ctrl_2_shdw, base + EMIF_EXT_PHY_CTRL_2_SHDW);
+	writel(regs->ext_phy_ctrl_3_shdw, base + EMIF_EXT_PHY_CTRL_3_SHDW);
+	writel(regs->ext_phy_ctrl_4_shdw, base + EMIF_EXT_PHY_CTRL_4_SHDW);
+}
+
+/*
+ * When voltage ramps dll calibration and forced read idle should
+ * happen more often
+ */
+static void setup_volt_sensitive_regs(struct emif_data *emif,
+		struct emif_regs *regs, u32 volt_state)
+{
+	u32		calib_ctrl;
+	void __iomem	*base = emif->base;
+
+	/*
+	 * EMIF_READ_IDLE_CTRL in EMIF4D refers to the same register as
+	 * EMIF_DLL_CALIB_CTRL in EMIF4D5 and dll_calib_ctrl_shadow_*
+	 * is an alias of the respective read_idle_ctrl_shdw_* (members of
+	 * a union). So, the below code takes care of both cases
+	 */
+	if (volt_state == DDR_VOLTAGE_RAMPING)
+		calib_ctrl = regs->dll_calib_ctrl_shdw_volt_ramp;
+	else
+		calib_ctrl = regs->dll_calib_ctrl_shdw_normal;
+
+	writel(calib_ctrl, base + EMIF_DLL_CALIB_CTRL_SHDW);
+}
+
+/*
+ * setup_temperature_sensitive_regs() - set the timings for temperature
+ * sensitive registers. This happens once at initialisation time based
+ * on the temperature at boot time and subsequently based on the temperature
+ * alert interrupt. Temperature alert can happen when the temperature
+ * increases or drops. So this function can have the effect of either
+ * derating the timings or going back to nominal values.
+ */
+static void setup_temperature_sensitive_regs(struct emif_data *emif,
+		struct emif_regs *regs)
+{
+	u32		tim1, tim3, ref_ctrl, type;
+	void __iomem	*base = emif->base;
+	u32		temperature;
+
+	type = emif->plat_data->device_info->type;
+
+	tim1 = regs->sdram_tim1_shdw;
+	tim3 = regs->sdram_tim3_shdw;
+	ref_ctrl = regs->ref_ctrl_shdw;
+
+	/* No de-rating for non-lpddr2 devices */
+	if (type != DDR_TYPE_LPDDR2_S2 && type != DDR_TYPE_LPDDR2_S4)
+		goto out;
+
+	temperature = emif->temperature_level;
+	if (temperature == SDRAM_TEMP_HIGH_DERATE_REFRESH) {
+		ref_ctrl = regs->ref_ctrl_shdw_derated;
+	} else if (temperature == SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS) {
+		tim1 = regs->sdram_tim1_shdw_derated;
+		tim3 = regs->sdram_tim3_shdw_derated;
+		ref_ctrl = regs->ref_ctrl_shdw_derated;
+	}
+
+out:
+	writel(tim1, base + EMIF_SDRAM_TIMING_1_SHDW);
+	writel(tim3, base + EMIF_SDRAM_TIMING_3_SHDW);
+	writel(ref_ctrl, base + EMIF_SDRAM_REFRESH_CTRL_SHDW);
+}
+
+static irqreturn_t handle_temp_alert(void __iomem *base, struct emif_data *emif)
+{
+	u32		old_temp_level;
+	irqreturn_t	ret = IRQ_HANDLED;
+
+	spin_lock_irqsave(&emif_lock, irq_state);
+	old_temp_level = emif->temperature_level;
+	get_temperature_level(emif);
+
+	if (unlikely(emif->temperature_level == old_temp_level)) {
+		goto out;
+	} else if (!emif->curr_regs) {
+		dev_err(emif->dev, "temperature alert before registers are calculated, not de-rating timings\n");
+		goto out;
+	}
+
+	if (emif->temperature_level < old_temp_level ||
+		emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN) {
+		/*
+		 * Temperature coming down - defer handling to thread OR
+		 * Temperature far too high - do kernel_power_off() from
+		 * thread context
+		 */
+		ret = IRQ_WAKE_THREAD;
+	} else {
+		/* Temperature is going up - handle immediately */
+		setup_temperature_sensitive_regs(emif, emif->curr_regs);
+		do_freq_update();
+	}
+
+out:
+	spin_unlock_irqrestore(&emif_lock, irq_state);
+	return ret;
+}
+
+static irqreturn_t emif_interrupt_handler(int irq, void *dev_id)
+{
+	u32			interrupts;
+	struct emif_data	*emif = dev_id;
+	void __iomem		*base = emif->base;
+	struct device		*dev = emif->dev;
+	irqreturn_t		ret = IRQ_HANDLED;
+
+	/* Save the status and clear it */
+	interrupts = readl(base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
+	writel(interrupts, base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
+
+	/*
+	 * Handle temperature alert
+	 * Temperature alert should be same for all ports
+	 * So, it's enough to process it only for one of the ports
+	 */
+	if (interrupts & TA_SYS_MASK)
+		ret = handle_temp_alert(base, emif);
+
+	if (interrupts & ERR_SYS_MASK)
+		dev_err(dev, "Access error from SYS port - %x\n", interrupts);
+
+	if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE) {
+		/* Save the status and clear it */
+		interrupts = readl(base + EMIF_LL_OCP_INTERRUPT_STATUS);
+		writel(interrupts, base + EMIF_LL_OCP_INTERRUPT_STATUS);
+
+		if (interrupts & ERR_LL_MASK)
+			dev_err(dev, "Access error from LL port - %x\n",
+				interrupts);
+	}
+
+	return ret;
+}
+
+static irqreturn_t emif_threaded_isr(int irq, void *dev_id)
+{
+	struct emif_data	*emif = dev_id;
+
+	if (emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN) {
+		dev_emerg(emif->dev, "SDRAM temperature exceeds operating limit.. Needs shut down!!!\n");
+		kernel_power_off();
+		return IRQ_HANDLED;
+	}
+
+	spin_lock_irqsave(&emif_lock, irq_state);
+
+	if (emif->curr_regs) {
+		setup_temperature_sensitive_regs(emif, emif->curr_regs);
+		do_freq_update();
+	} else {
+		dev_err(emif->dev, "temperature alert before registers are calculated, not de-rating timings\n");
+	}
+
+	spin_unlock_irqrestore(&emif_lock, irq_state);
+
+	return IRQ_HANDLED;
+}
+
+static void clear_all_interrupts(struct emif_data *emif)
+{
+	void __iomem	*base = emif->base;
+
+	writel(readl(base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS),
+		base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
+	if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE)
+		writel(readl(base + EMIF_LL_OCP_INTERRUPT_STATUS),
+			base + EMIF_LL_OCP_INTERRUPT_STATUS);
+}
+
+static void disable_and_clear_all_interrupts(struct emif_data *emif)
+{
+	void __iomem		*base = emif->base;
+
+	/* Disable all interrupts */
+	writel(readl(base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET),
+		base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_CLEAR);
+	if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE)
+		writel(readl(base + EMIF_LL_OCP_INTERRUPT_ENABLE_SET),
+			base + EMIF_LL_OCP_INTERRUPT_ENABLE_CLEAR);
+
+	/* Clear all interrupts */
+	clear_all_interrupts(emif);
+}
+
+static int __init_or_module setup_interrupts(struct emif_data *emif, u32 irq)
+{
+	u32		interrupts, type;
+	void __iomem	*base = emif->base;
+
+	type = emif->plat_data->device_info->type;
+
+	clear_all_interrupts(emif);
+
+	/* Enable interrupts for SYS interface */
+	interrupts = EN_ERR_SYS_MASK;
+	if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4)
+		interrupts |= EN_TA_SYS_MASK;
+	writel(interrupts, base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET);
+
+	/* Enable interrupts for LL interface */
+	if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE) {
+		/* TA need not be enabled for LL */
+		interrupts = EN_ERR_LL_MASK;
+		writel(interrupts, base + EMIF_LL_OCP_INTERRUPT_ENABLE_SET);
+	}
+
+	/* setup IRQ handlers */
+	return devm_request_threaded_irq(emif->dev, irq,
+				    emif_interrupt_handler,
+				    emif_threaded_isr,
+				    0, dev_name(emif->dev),
+				    emif);
+
+}
+
+static void __init_or_module emif_onetime_settings(struct emif_data *emif)
+{
+	u32				pwr_mgmt_ctrl, zq, temp_alert_cfg;
+	void __iomem			*base = emif->base;
+	const struct lpddr2_addressing	*addressing;
+	const struct ddr_device_info	*device_info;
+
+	device_info = emif->plat_data->device_info;
+	addressing = get_addressing_table(device_info);
+
+	/*
+	 * Init power management settings
+	 * We don't know the frequency yet. Use a high frequency
+	 * value for a conservative timeout setting
+	 */
+	pwr_mgmt_ctrl = get_pwr_mgmt_ctrl(1000000000, emif,
+			emif->plat_data->ip_rev);
+	emif->lpmode = (pwr_mgmt_ctrl & LP_MODE_MASK) >> LP_MODE_SHIFT;
+	writel(pwr_mgmt_ctrl, base + EMIF_POWER_MANAGEMENT_CONTROL);
+
+	/* Init ZQ calibration settings */
+	zq = get_zq_config_reg(addressing, device_info->cs1_used,
+		device_info->cal_resistors_per_cs);
+	writel(zq, base + EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG);
+
+	/* Check temperature level temperature level*/
+	get_temperature_level(emif);
+	if (emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN)
+		dev_emerg(emif->dev, "SDRAM temperature exceeds operating limit.. Needs shut down!!!\n");
+
+	/* Init temperature polling */
+	temp_alert_cfg = get_temp_alert_config(addressing,
+		emif->plat_data->custom_configs, device_info->cs1_used,
+		device_info->io_width, get_emif_bus_width(emif));
+	writel(temp_alert_cfg, base + EMIF_TEMPERATURE_ALERT_CONFIG);
+
+	/*
+	 * Program external PHY control registers that are not frequency
+	 * dependent
+	 */
+	if (emif->plat_data->phy_type != EMIF_PHY_TYPE_INTELLIPHY)
+		return;
+	writel(EMIF_EXT_PHY_CTRL_1_VAL, base + EMIF_EXT_PHY_CTRL_1_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_5_VAL, base + EMIF_EXT_PHY_CTRL_5_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_6_VAL, base + EMIF_EXT_PHY_CTRL_6_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_7_VAL, base + EMIF_EXT_PHY_CTRL_7_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_8_VAL, base + EMIF_EXT_PHY_CTRL_8_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_9_VAL, base + EMIF_EXT_PHY_CTRL_9_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_10_VAL, base + EMIF_EXT_PHY_CTRL_10_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_11_VAL, base + EMIF_EXT_PHY_CTRL_11_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_12_VAL, base + EMIF_EXT_PHY_CTRL_12_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_13_VAL, base + EMIF_EXT_PHY_CTRL_13_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_14_VAL, base + EMIF_EXT_PHY_CTRL_14_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_15_VAL, base + EMIF_EXT_PHY_CTRL_15_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_16_VAL, base + EMIF_EXT_PHY_CTRL_16_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_17_VAL, base + EMIF_EXT_PHY_CTRL_17_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_18_VAL, base + EMIF_EXT_PHY_CTRL_18_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_19_VAL, base + EMIF_EXT_PHY_CTRL_19_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_20_VAL, base + EMIF_EXT_PHY_CTRL_20_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_21_VAL, base + EMIF_EXT_PHY_CTRL_21_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_22_VAL, base + EMIF_EXT_PHY_CTRL_22_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_23_VAL, base + EMIF_EXT_PHY_CTRL_23_SHDW);
+	writel(EMIF_EXT_PHY_CTRL_24_VAL, base + EMIF_EXT_PHY_CTRL_24_SHDW);
+}
+
+static void get_default_timings(struct emif_data *emif)
+{
+	struct emif_platform_data *pd = emif->plat_data;
+
+	pd->timings		= lpddr2_jedec_timings;
+	pd->timings_arr_size	= ARRAY_SIZE(lpddr2_jedec_timings);
+
+	dev_warn(emif->dev, "%s: using default timings\n", __func__);
+}
+
+static int is_dev_data_valid(u32 type, u32 density, u32 io_width, u32 phy_type,
+		u32 ip_rev, struct device *dev)
+{
+	int valid;
+
+	valid = (type == DDR_TYPE_LPDDR2_S4 ||
+			type == DDR_TYPE_LPDDR2_S2)
+		&& (density >= DDR_DENSITY_64Mb
+			&& density <= DDR_DENSITY_8Gb)
+		&& (io_width >= DDR_IO_WIDTH_8
+			&& io_width <= DDR_IO_WIDTH_32);
+
+	/* Combinations of EMIF and PHY revisions that we support today */
+	switch (ip_rev) {
+	case EMIF_4D:
+		valid = valid && (phy_type == EMIF_PHY_TYPE_ATTILAPHY);
+		break;
+	case EMIF_4D5:
+		valid = valid && (phy_type == EMIF_PHY_TYPE_INTELLIPHY);
+		break;
+	default:
+		valid = 0;
+	}
+
+	if (!valid)
+		dev_err(dev, "%s: invalid DDR details\n", __func__);
+	return valid;
+}
+
+static int is_custom_config_valid(struct emif_custom_configs *cust_cfgs,
+		struct device *dev)
+{
+	int valid = 1;
+
+	if ((cust_cfgs->mask & EMIF_CUSTOM_CONFIG_LPMODE) &&
+		(cust_cfgs->lpmode != EMIF_LP_MODE_DISABLE))
+		valid = cust_cfgs->lpmode_freq_threshold &&
+			cust_cfgs->lpmode_timeout_performance &&
+			cust_cfgs->lpmode_timeout_power;
+
+	if (cust_cfgs->mask & EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL)
+		valid = valid && cust_cfgs->temp_alert_poll_interval_ms;
+
+	if (!valid)
+		dev_warn(dev, "%s: invalid custom configs\n", __func__);
+
+	return valid;
+}
+
+static struct emif_data *__init_or_module get_device_details(
+		struct platform_device *pdev)
+{
+	u32				size;
+	struct emif_data		*emif = NULL;
+	struct ddr_device_info		*dev_info;
+	struct emif_custom_configs	*cust_cfgs;
+	struct emif_platform_data	*pd;
+	struct device			*dev;
+	void				*temp;
+
+	pd = pdev->dev.platform_data;
+	dev = &pdev->dev;
+
+	if (!(pd && pd->device_info && is_dev_data_valid(pd->device_info->type,
+			pd->device_info->density, pd->device_info->io_width,
+			pd->phy_type, pd->ip_rev, dev))) {
+		dev_err(dev, "%s: invalid device data\n", __func__);
+		goto error;
+	}
+
+	emif	= devm_kzalloc(dev, sizeof(*emif), GFP_KERNEL);
+	temp	= devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+	dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL);
+
+	if (!emif || !pd || !dev_info) {
+		dev_err(dev, "%s:%d: allocation error\n", __func__, __LINE__);
+		goto error;
+	}
+
+	memcpy(temp, pd, sizeof(*pd));
+	pd = temp;
+	memcpy(dev_info, pd->device_info, sizeof(*dev_info));
+
+	pd->device_info		= dev_info;
+	emif->plat_data		= pd;
+	emif->dev		= dev;
+	emif->temperature_level	= SDRAM_TEMP_NOMINAL;
+
+	/*
+	 * For EMIF instances other than EMIF1 see if the devices connected
+	 * are exactly same as on EMIF1(which is typically the case). If so,
+	 * mark it as a duplicate of EMIF1 and skip copying timings data.
+	 * This will save some memory and some computation later.
+	 */
+	emif->duplicate = emif1 && (memcmp(dev_info,
+		emif1->plat_data->device_info,
+		sizeof(struct ddr_device_info)) == 0);
+
+	if (emif->duplicate) {
+		pd->timings = NULL;
+		pd->min_tck = NULL;
+		goto out;
+	} else if (emif1) {
+		dev_warn(emif->dev, "%s: Non-symmetric DDR geometry\n",
+			__func__);
+	}
+
+	/*
+	 * Copy custom configs - ignore allocation error, if any, as
+	 * custom_configs is not very critical
+	 */
+	cust_cfgs = pd->custom_configs;
+	if (cust_cfgs && is_custom_config_valid(cust_cfgs, dev)) {
+		temp = devm_kzalloc(dev, sizeof(*cust_cfgs), GFP_KERNEL);
+		if (temp)
+			memcpy(temp, cust_cfgs, sizeof(*cust_cfgs));
+		else
+			dev_warn(dev, "%s:%d: allocation error\n", __func__,
+				__LINE__);
+		pd->custom_configs = temp;
+	}
+
+	/*
+	 * Copy timings and min-tck values from platform data. If it is not
+	 * available or if memory allocation fails, use JEDEC defaults
+	 */
+	size = sizeof(struct lpddr2_timings) * pd->timings_arr_size;
+	if (pd->timings) {
+		temp = devm_kzalloc(dev, size, GFP_KERNEL);
+		if (temp) {
+			memcpy(temp, pd->timings, sizeof(*pd->timings));
+			pd->timings = temp;
+		} else {
+			dev_warn(dev, "%s:%d: allocation error\n", __func__,
+				__LINE__);
+			get_default_timings(emif);
+		}
+	} else {
+		get_default_timings(emif);
+	}
+
+	if (pd->min_tck) {
+		temp = devm_kzalloc(dev, sizeof(*pd->min_tck), GFP_KERNEL);
+		if (temp) {
+			memcpy(temp, pd->min_tck, sizeof(*pd->min_tck));
+			pd->min_tck = temp;
+		} else {
+			dev_warn(dev, "%s:%d: allocation error\n", __func__,
+				__LINE__);
+			pd->min_tck = &lpddr2_jedec_min_tck;
+		}
+	} else {
+		pd->min_tck = &lpddr2_jedec_min_tck;
+	}
+
+out:
+	return emif;
+
+error:
+	return NULL;
+}
+
+static int __init_or_module emif_probe(struct platform_device *pdev)
+{
+	struct emif_data	*emif;
+	struct resource		*res;
+	int			irq;
+
+	emif = get_device_details(pdev);
+	if (!emif) {
+		pr_err("%s: error getting device data\n", __func__);
+		goto error;
+	}
+
+	list_add(&emif->node, &device_list);
+	emif->addressing = get_addressing_table(emif->plat_data->device_info);
+
+	/* Save pointers to each other in emif and device structures */
+	emif->dev = &pdev->dev;
+	platform_set_drvdata(pdev, emif);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(emif->dev, "%s: error getting memory resource\n",
+			__func__);
+		goto error;
+	}
+
+	emif->base = devm_request_and_ioremap(emif->dev, res);
+	if (!emif->base) {
+		dev_err(emif->dev, "%s: devm_request_and_ioremap() failed\n",
+			__func__);
+		goto error;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(emif->dev, "%s: error getting IRQ resource - %d\n",
+			__func__, irq);
+		goto error;
+	}
+
+	emif_onetime_settings(emif);
+	emif_debugfs_init(emif);
+	disable_and_clear_all_interrupts(emif);
+	setup_interrupts(emif, irq);
+
+	/* One-time actions taken on probing the first device */
+	if (!emif1) {
+		emif1 = emif;
+		spin_lock_init(&emif_lock);
+
+		/*
+		 * TODO: register notifiers for frequency and voltage
+		 * change here once the respective frameworks are
+		 * available
+		 */
+	}
+
+	dev_info(&pdev->dev, "%s: device configured with addr = %p and IRQ%d\n",
+		__func__, emif->base, irq);
+
+	return 0;
+error:
+	return -ENODEV;
+}
+
+static int __exit emif_remove(struct platform_device *pdev)
+{
+	struct emif_data *emif = platform_get_drvdata(pdev);
+
+	emif_debugfs_exit(emif);
+
+	return 0;
+}
+
+static void emif_shutdown(struct platform_device *pdev)
+{
+	struct emif_data	*emif = platform_get_drvdata(pdev);
+
+	disable_and_clear_all_interrupts(emif);
+}
+
+static int get_emif_reg_values(struct emif_data *emif, u32 freq,
+		struct emif_regs *regs)
+{
+	u32				cs1_used, ip_rev, phy_type;
+	u32				cl, type;
+	const struct lpddr2_timings	*timings;
+	const struct lpddr2_min_tck	*min_tck;
+	const struct ddr_device_info	*device_info;
+	const struct lpddr2_addressing	*addressing;
+	struct emif_data		*emif_for_calc;
+	struct device			*dev;
+	const struct emif_custom_configs *custom_configs;
+
+	dev = emif->dev;
+	/*
+	 * If the devices on this EMIF instance is duplicate of EMIF1,
+	 * use EMIF1 details for the calculation
+	 */
+	emif_for_calc	= emif->duplicate ? emif1 : emif;
+	timings		= get_timings_table(emif_for_calc, freq);
+	addressing	= emif_for_calc->addressing;
+	if (!timings || !addressing) {
+		dev_err(dev, "%s: not enough data available for %dHz",
+			__func__, freq);
+		return -1;
+	}
+
+	device_info	= emif_for_calc->plat_data->device_info;
+	type		= device_info->type;
+	cs1_used	= device_info->cs1_used;
+	ip_rev		= emif_for_calc->plat_data->ip_rev;
+	phy_type	= emif_for_calc->plat_data->phy_type;
+
+	min_tck		= emif_for_calc->plat_data->min_tck;
+	custom_configs	= emif_for_calc->plat_data->custom_configs;
+
+	set_ddr_clk_period(freq);
+
+	regs->ref_ctrl_shdw = get_sdram_ref_ctrl_shdw(freq, addressing);
+	regs->sdram_tim1_shdw = get_sdram_tim_1_shdw(timings, min_tck,
+			addressing);
+	regs->sdram_tim2_shdw = get_sdram_tim_2_shdw(timings, min_tck,
+			addressing, type);
+	regs->sdram_tim3_shdw = get_sdram_tim_3_shdw(timings, min_tck,
+		addressing, type, ip_rev, EMIF_NORMAL_TIMINGS);
+
+	cl = get_cl(emif);
+
+	if (phy_type == EMIF_PHY_TYPE_ATTILAPHY && ip_rev == EMIF_4D) {
+		regs->phy_ctrl_1_shdw = get_ddr_phy_ctrl_1_attilaphy_4d(
+			timings, freq, cl);
+	} else if (phy_type == EMIF_PHY_TYPE_INTELLIPHY && ip_rev == EMIF_4D5) {
+		regs->phy_ctrl_1_shdw = get_phy_ctrl_1_intelliphy_4d5(freq, cl);
+		regs->ext_phy_ctrl_2_shdw = get_ext_phy_ctrl_2_intelliphy_4d5();
+		regs->ext_phy_ctrl_3_shdw = get_ext_phy_ctrl_3_intelliphy_4d5();
+		regs->ext_phy_ctrl_4_shdw = get_ext_phy_ctrl_4_intelliphy_4d5();
+	} else {
+		return -1;
+	}
+
+	/* Only timeout values in pwr_mgmt_ctrl_shdw register */
+	regs->pwr_mgmt_ctrl_shdw =
+		get_pwr_mgmt_ctrl(freq, emif_for_calc, ip_rev) &
+		(CS_TIM_MASK | SR_TIM_MASK | PD_TIM_MASK);
+
+	if (ip_rev & EMIF_4D) {
+		regs->read_idle_ctrl_shdw_normal =
+			get_read_idle_ctrl_shdw(DDR_VOLTAGE_STABLE);
+
+		regs->read_idle_ctrl_shdw_volt_ramp =
+			get_read_idle_ctrl_shdw(DDR_VOLTAGE_RAMPING);
+	} else if (ip_rev & EMIF_4D5) {
+		regs->dll_calib_ctrl_shdw_normal =
+			get_dll_calib_ctrl_shdw(DDR_VOLTAGE_STABLE);
+
+		regs->dll_calib_ctrl_shdw_volt_ramp =
+			get_dll_calib_ctrl_shdw(DDR_VOLTAGE_RAMPING);
+	}
+
+	if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4) {
+		regs->ref_ctrl_shdw_derated = get_sdram_ref_ctrl_shdw(freq / 4,
+			addressing);
+
+		regs->sdram_tim1_shdw_derated =
+			get_sdram_tim_1_shdw_derated(timings, min_tck,
+				addressing);
+
+		regs->sdram_tim3_shdw_derated = get_sdram_tim_3_shdw(timings,
+			min_tck, addressing, type, ip_rev,
+			EMIF_DERATED_TIMINGS);
+	}
+
+	regs->freq = freq;
+
+	return 0;
+}
+
+/*
+ * get_regs() - gets the cached emif_regs structure for a given EMIF instance
+ * given frequency(freq):
+ *
+ * As an optimisation, every EMIF instance other than EMIF1 shares the
+ * register cache with EMIF1 if the devices connected on this instance
+ * are same as that on EMIF1(indicated by the duplicate flag)
+ *
+ * If we do not have an entry corresponding to the frequency given, we
+ * allocate a new entry and calculate the values
+ *
+ * Upon finding the right reg dump, save it in curr_regs. It can be
+ * directly used for thermal de-rating and voltage ramping changes.
+ */
+static struct emif_regs *get_regs(struct emif_data *emif, u32 freq)
+{
+	int			i;
+	struct emif_regs	**regs_cache;
+	struct emif_regs	*regs = NULL;
+	struct device		*dev;
+
+	dev = emif->dev;
+	if (emif->curr_regs && emif->curr_regs->freq == freq) {
+		dev_dbg(dev, "%s: using curr_regs - %u Hz", __func__, freq);
+		return emif->curr_regs;
+	}
+
+	if (emif->duplicate)
+		regs_cache = emif1->regs_cache;
+	else
+		regs_cache = emif->regs_cache;
+
+	for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++) {
+		if (regs_cache[i]->freq == freq) {
+			regs = regs_cache[i];
+			dev_dbg(dev,
+				"%s: reg dump found in reg cache for %u Hz\n",
+				__func__, freq);
+			break;
+		}
+	}
+
+	/*
+	 * If we don't have an entry for this frequency in the cache create one
+	 * and calculate the values
+	 */
+	if (!regs) {
+		regs = devm_kzalloc(emif->dev, sizeof(*regs), GFP_ATOMIC);
+		if (!regs)
+			return NULL;
+
+		if (get_emif_reg_values(emif, freq, regs)) {
+			devm_kfree(emif->dev, regs);
+			return NULL;
+		}
+
+		/*
+		 * Now look for an un-used entry in the cache and save the
+		 * newly created struct. If there are no free entries
+		 * over-write the last entry
+		 */
+		for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++)
+			;
+
+		if (i >= EMIF_MAX_NUM_FREQUENCIES) {
+			dev_warn(dev, "%s: regs_cache full - reusing a slot!!\n",
+				__func__);
+			i = EMIF_MAX_NUM_FREQUENCIES - 1;
+			devm_kfree(emif->dev, regs_cache[i]);
+		}
+		regs_cache[i] = regs;
+	}
+
+	return regs;
+}
+
+static void do_volt_notify_handling(struct emif_data *emif, u32 volt_state)
+{
+	dev_dbg(emif->dev, "%s: voltage notification : %d", __func__,
+		volt_state);
+
+	if (!emif->curr_regs) {
+		dev_err(emif->dev,
+			"%s: volt-notify before registers are ready: %d\n",
+			__func__, volt_state);
+		return;
+	}
+
+	setup_volt_sensitive_regs(emif, emif->curr_regs, volt_state);
+}
+
+/*
+ * TODO: voltage notify handling should be hooked up to
+ * regulator framework as soon as the necessary support
+ * is available in mainline kernel. This function is un-used
+ * right now.
+ */
+static void __attribute__((unused)) volt_notify_handling(u32 volt_state)
+{
+	struct emif_data *emif;
+
+	spin_lock_irqsave(&emif_lock, irq_state);
+
+	list_for_each_entry(emif, &device_list, node)
+		do_volt_notify_handling(emif, volt_state);
+	do_freq_update();
+
+	spin_unlock_irqrestore(&emif_lock, irq_state);
+}
+
+static void do_freq_pre_notify_handling(struct emif_data *emif, u32 new_freq)
+{
+	struct emif_regs *regs;
+
+	regs = get_regs(emif, new_freq);
+	if (!regs)
+		return;
+
+	emif->curr_regs = regs;
+
+	/*
+	 * Update the shadow registers:
+	 * Temperature and voltage-ramp sensitive settings are also configured
+	 * in terms of DDR cycles. So, we need to update them too when there
+	 * is a freq change
+	 */
+	dev_dbg(emif->dev, "%s: setting up shadow registers for %uHz",
+		__func__, new_freq);
+	setup_registers(emif, regs);
+	setup_temperature_sensitive_regs(emif, regs);
+	setup_volt_sensitive_regs(emif, regs, DDR_VOLTAGE_STABLE);
+
+	/*
+	 * Part of workaround for errata i728. See do_freq_update()
+	 * for more details
+	 */
+	if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
+		set_lpmode(emif, EMIF_LP_MODE_DISABLE);
+}
+
+/*
+ * TODO: frequency notify handling should be hooked up to
+ * clock framework as soon as the necessary support is
+ * available in mainline kernel. This function is un-used
+ * right now.
+ */
+static void __attribute__((unused)) freq_pre_notify_handling(u32 new_freq)
+{
+	struct emif_data *emif;
+
+	/*
+	 * NOTE: we are taking the spin-lock here and releases it
+	 * only in post-notifier. This doesn't look good and
+	 * Sparse complains about it, but this seems to be
+	 * un-avoidable. We need to lock a sequence of events
+	 * that is split between EMIF and clock framework.
+	 *
+	 * 1. EMIF driver updates EMIF timings in shadow registers in the
+	 *    frequency pre-notify callback from clock framework
+	 * 2. clock framework sets up the registers for the new frequency
+	 * 3. clock framework initiates a hw-sequence that updates
+	 *    the frequency EMIF timings synchronously.
+	 *
+	 * All these 3 steps should be performed as an atomic operation
+	 * vis-a-vis similar sequence in the EMIF interrupt handler
+	 * for temperature events. Otherwise, there could be race
+	 * conditions that could result in incorrect EMIF timings for
+	 * a given frequency
+	 */
+	spin_lock_irqsave(&emif_lock, irq_state);
+
+	list_for_each_entry(emif, &device_list, node)
+		do_freq_pre_notify_handling(emif, new_freq);
+}
+
+static void do_freq_post_notify_handling(struct emif_data *emif)
+{
+	/*
+	 * Part of workaround for errata i728. See do_freq_update()
+	 * for more details
+	 */
+	if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
+		set_lpmode(emif, EMIF_LP_MODE_SELF_REFRESH);
+}
+
+/*
+ * TODO: frequency notify handling should be hooked up to
+ * clock framework as soon as the necessary support is
+ * available in mainline kernel. This function is un-used
+ * right now.
+ */
+static void __attribute__((unused)) freq_post_notify_handling(void)
+{
+	struct emif_data *emif;
+
+	list_for_each_entry(emif, &device_list, node)
+		do_freq_post_notify_handling(emif);
+
+	/*
+	 * Lock is done in pre-notify handler. See freq_pre_notify_handling()
+	 * for more details
+	 */
+	spin_unlock_irqrestore(&emif_lock, irq_state);
+}
+
+static struct platform_driver emif_driver = {
+	.remove		= __exit_p(emif_remove),
+	.shutdown	= emif_shutdown,
+	.driver = {
+		.name = "emif",
+	},
+};
+
+static int __init_or_module emif_register(void)
+{
+	return platform_driver_probe(&emif_driver, emif_probe);
+}
+
+static void __exit emif_unregister(void)
+{
+	platform_driver_unregister(&emif_driver);
+}
+
+module_init(emif_register);
+module_exit(emif_unregister);
+MODULE_DESCRIPTION("TI EMIF SDRAM Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:emif");
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/drivers/memory/emif.h b/drivers/memory/emif.h
new file mode 100644
index 00000000000..bfe08bae961
--- /dev/null
+++ b/drivers/memory/emif.h
@@ -0,0 +1,589 @@
+/*
+ * Defines for the EMIF driver
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __EMIF_H
+#define __EMIF_H
+
+/*
+ * Maximum number of different frequencies supported by EMIF driver
+ * Determines the number of entries in the pointer array for register
+ * cache
+ */
+#define EMIF_MAX_NUM_FREQUENCIES			6
+
+/* State of the core voltage */
+#define DDR_VOLTAGE_STABLE				0
+#define DDR_VOLTAGE_RAMPING				1
+
+/* Defines for timing De-rating */
+#define EMIF_NORMAL_TIMINGS				0
+#define EMIF_DERATED_TIMINGS				1
+
+/* Length of the forced read idle period in terms of cycles */
+#define EMIF_READ_IDLE_LEN_VAL				5
+
+/*
+ * forced read idle interval to be used when voltage
+ * is changed as part of DVFS/DPS - 1ms
+ */
+#define READ_IDLE_INTERVAL_DVFS				(1*1000000)
+
+/*
+ * Forced read idle interval to be used when voltage is stable
+ * 50us - or maximum value will do
+ */
+#define READ_IDLE_INTERVAL_NORMAL			(50*1000000)
+
+/* DLL calibration interval when voltage is NOT stable - 1us */
+#define DLL_CALIB_INTERVAL_DVFS				(1*1000000)
+
+#define DLL_CALIB_ACK_WAIT_VAL				5
+
+/* Interval between ZQCS commands - hw team recommended value */
+#define EMIF_ZQCS_INTERVAL_US				(50*1000)
+/* Enable ZQ Calibration on exiting Self-refresh */
+#define ZQ_SFEXITEN_ENABLE				1
+/*
+ * ZQ Calibration simultaneously on both chip-selects:
+ * Needs one calibration resistor per CS
+ */
+#define	ZQ_DUALCALEN_DISABLE				0
+#define	ZQ_DUALCALEN_ENABLE				1
+
+#define T_ZQCS_DEFAULT_NS				90
+#define T_ZQCL_DEFAULT_NS				360
+#define T_ZQINIT_DEFAULT_NS				1000
+
+/* DPD_EN */
+#define DPD_DISABLE					0
+#define DPD_ENABLE					1
+
+/*
+ * Default values for the low-power entry to be used if not provided by user.
+ * OMAP4/5 has a hw bug(i735) due to which this value can not be less than 512
+ * Timeout values are in DDR clock 'cycles' and frequency threshold in Hz
+ */
+#define EMIF_LP_MODE_TIMEOUT_PERFORMANCE		2048
+#define EMIF_LP_MODE_TIMEOUT_POWER			512
+#define EMIF_LP_MODE_FREQ_THRESHOLD			400000000
+
+/* DDR_PHY_CTRL_1 values for EMIF4D - ATTILA PHY combination */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_ATTILAPHY		0x049FF000
+#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ_ATTILAPHY	0x41
+#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ_ATTILAPHY	0x80
+#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY 0xFF
+
+/* DDR_PHY_CTRL_1 values for EMIF4D5 INTELLIPHY combination */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY		0x0E084200
+#define EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS	10000
+
+/* TEMP_ALERT_CONFIG - corresponding to temp gradient 5 C/s */
+#define TEMP_ALERT_POLL_INTERVAL_DEFAULT_MS		360
+
+#define EMIF_T_CSTA					3
+#define EMIF_T_PDLL_UL					128
+
+/* External PHY control registers magic values */
+#define EMIF_EXT_PHY_CTRL_1_VAL				0x04020080
+#define EMIF_EXT_PHY_CTRL_5_VAL				0x04010040
+#define EMIF_EXT_PHY_CTRL_6_VAL				0x01004010
+#define EMIF_EXT_PHY_CTRL_7_VAL				0x00001004
+#define EMIF_EXT_PHY_CTRL_8_VAL				0x04010040
+#define EMIF_EXT_PHY_CTRL_9_VAL				0x01004010
+#define EMIF_EXT_PHY_CTRL_10_VAL			0x00001004
+#define EMIF_EXT_PHY_CTRL_11_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_12_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_13_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_14_VAL			0x80080080
+#define EMIF_EXT_PHY_CTRL_15_VAL			0x00800800
+#define EMIF_EXT_PHY_CTRL_16_VAL			0x08102040
+#define EMIF_EXT_PHY_CTRL_17_VAL			0x00000001
+#define EMIF_EXT_PHY_CTRL_18_VAL			0x540A8150
+#define EMIF_EXT_PHY_CTRL_19_VAL			0xA81502A0
+#define EMIF_EXT_PHY_CTRL_20_VAL			0x002A0540
+#define EMIF_EXT_PHY_CTRL_21_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_22_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_23_VAL			0x00000000
+#define EMIF_EXT_PHY_CTRL_24_VAL			0x00000077
+
+#define EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS	1200
+
+/* Registers offset */
+#define EMIF_MODULE_ID_AND_REVISION			0x0000
+#define EMIF_STATUS					0x0004
+#define EMIF_SDRAM_CONFIG				0x0008
+#define EMIF_SDRAM_CONFIG_2				0x000c
+#define EMIF_SDRAM_REFRESH_CONTROL			0x0010
+#define EMIF_SDRAM_REFRESH_CTRL_SHDW			0x0014
+#define EMIF_SDRAM_TIMING_1				0x0018
+#define EMIF_SDRAM_TIMING_1_SHDW			0x001c
+#define EMIF_SDRAM_TIMING_2				0x0020
+#define EMIF_SDRAM_TIMING_2_SHDW			0x0024
+#define EMIF_SDRAM_TIMING_3				0x0028
+#define EMIF_SDRAM_TIMING_3_SHDW			0x002c
+#define EMIF_LPDDR2_NVM_TIMING				0x0030
+#define EMIF_LPDDR2_NVM_TIMING_SHDW			0x0034
+#define EMIF_POWER_MANAGEMENT_CONTROL			0x0038
+#define EMIF_POWER_MANAGEMENT_CTRL_SHDW			0x003c
+#define EMIF_LPDDR2_MODE_REG_DATA			0x0040
+#define EMIF_LPDDR2_MODE_REG_CONFIG			0x0050
+#define EMIF_OCP_CONFIG					0x0054
+#define EMIF_OCP_CONFIG_VALUE_1				0x0058
+#define EMIF_OCP_CONFIG_VALUE_2				0x005c
+#define EMIF_IODFT_TEST_LOGIC_GLOBAL_CONTROL		0x0060
+#define EMIF_IODFT_TEST_LOGIC_CTRL_MISR_RESULT		0x0064
+#define EMIF_IODFT_TEST_LOGIC_ADDRESS_MISR_RESULT	0x0068
+#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_1	0x006c
+#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_2	0x0070
+#define EMIF_IODFT_TEST_LOGIC_DATA_MISR_RESULT_3	0x0074
+#define EMIF_PERFORMANCE_COUNTER_1			0x0080
+#define EMIF_PERFORMANCE_COUNTER_2			0x0084
+#define EMIF_PERFORMANCE_COUNTER_CONFIG			0x0088
+#define EMIF_PERFORMANCE_COUNTER_MASTER_REGION_SELECT	0x008c
+#define EMIF_PERFORMANCE_COUNTER_TIME			0x0090
+#define EMIF_MISC_REG					0x0094
+#define EMIF_DLL_CALIB_CTRL				0x0098
+#define EMIF_DLL_CALIB_CTRL_SHDW			0x009c
+#define EMIF_END_OF_INTERRUPT				0x00a0
+#define EMIF_SYSTEM_OCP_INTERRUPT_RAW_STATUS		0x00a4
+#define EMIF_LL_OCP_INTERRUPT_RAW_STATUS		0x00a8
+#define EMIF_SYSTEM_OCP_INTERRUPT_STATUS		0x00ac
+#define EMIF_LL_OCP_INTERRUPT_STATUS			0x00b0
+#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET		0x00b4
+#define EMIF_LL_OCP_INTERRUPT_ENABLE_SET		0x00b8
+#define EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_CLEAR		0x00bc
+#define EMIF_LL_OCP_INTERRUPT_ENABLE_CLEAR		0x00c0
+#define EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG	0x00c8
+#define EMIF_TEMPERATURE_ALERT_CONFIG			0x00cc
+#define EMIF_OCP_ERROR_LOG				0x00d0
+#define EMIF_READ_WRITE_LEVELING_RAMP_WINDOW		0x00d4
+#define EMIF_READ_WRITE_LEVELING_RAMP_CONTROL		0x00d8
+#define EMIF_READ_WRITE_LEVELING_CONTROL		0x00dc
+#define EMIF_DDR_PHY_CTRL_1				0x00e4
+#define EMIF_DDR_PHY_CTRL_1_SHDW			0x00e8
+#define EMIF_DDR_PHY_CTRL_2				0x00ec
+#define EMIF_PRIORITY_TO_CLASS_OF_SERVICE_MAPPING	0x0100
+#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_1_MAPPING 0x0104
+#define EMIF_CONNECTION_ID_TO_CLASS_OF_SERVICE_2_MAPPING 0x0108
+#define EMIF_READ_WRITE_EXECUTION_THRESHOLD		0x0120
+#define EMIF_COS_CONFIG					0x0124
+#define EMIF_PHY_STATUS_1				0x0140
+#define EMIF_PHY_STATUS_2				0x0144
+#define EMIF_PHY_STATUS_3				0x0148
+#define EMIF_PHY_STATUS_4				0x014c
+#define EMIF_PHY_STATUS_5				0x0150
+#define EMIF_PHY_STATUS_6				0x0154
+#define EMIF_PHY_STATUS_7				0x0158
+#define EMIF_PHY_STATUS_8				0x015c
+#define EMIF_PHY_STATUS_9				0x0160
+#define EMIF_PHY_STATUS_10				0x0164
+#define EMIF_PHY_STATUS_11				0x0168
+#define EMIF_PHY_STATUS_12				0x016c
+#define EMIF_PHY_STATUS_13				0x0170
+#define EMIF_PHY_STATUS_14				0x0174
+#define EMIF_PHY_STATUS_15				0x0178
+#define EMIF_PHY_STATUS_16				0x017c
+#define EMIF_PHY_STATUS_17				0x0180
+#define EMIF_PHY_STATUS_18				0x0184
+#define EMIF_PHY_STATUS_19				0x0188
+#define EMIF_PHY_STATUS_20				0x018c
+#define EMIF_PHY_STATUS_21				0x0190
+#define EMIF_EXT_PHY_CTRL_1				0x0200
+#define EMIF_EXT_PHY_CTRL_1_SHDW			0x0204
+#define EMIF_EXT_PHY_CTRL_2				0x0208
+#define EMIF_EXT_PHY_CTRL_2_SHDW			0x020c
+#define EMIF_EXT_PHY_CTRL_3				0x0210
+#define EMIF_EXT_PHY_CTRL_3_SHDW			0x0214
+#define EMIF_EXT_PHY_CTRL_4				0x0218
+#define EMIF_EXT_PHY_CTRL_4_SHDW			0x021c
+#define EMIF_EXT_PHY_CTRL_5				0x0220
+#define EMIF_EXT_PHY_CTRL_5_SHDW			0x0224
+#define EMIF_EXT_PHY_CTRL_6				0x0228
+#define EMIF_EXT_PHY_CTRL_6_SHDW			0x022c
+#define EMIF_EXT_PHY_CTRL_7				0x0230
+#define EMIF_EXT_PHY_CTRL_7_SHDW			0x0234
+#define EMIF_EXT_PHY_CTRL_8				0x0238
+#define EMIF_EXT_PHY_CTRL_8_SHDW			0x023c
+#define EMIF_EXT_PHY_CTRL_9				0x0240
+#define EMIF_EXT_PHY_CTRL_9_SHDW			0x0244
+#define EMIF_EXT_PHY_CTRL_10				0x0248
+#define EMIF_EXT_PHY_CTRL_10_SHDW			0x024c
+#define EMIF_EXT_PHY_CTRL_11				0x0250
+#define EMIF_EXT_PHY_CTRL_11_SHDW			0x0254
+#define EMIF_EXT_PHY_CTRL_12				0x0258
+#define EMIF_EXT_PHY_CTRL_12_SHDW			0x025c
+#define EMIF_EXT_PHY_CTRL_13				0x0260
+#define EMIF_EXT_PHY_CTRL_13_SHDW			0x0264
+#define EMIF_EXT_PHY_CTRL_14				0x0268
+#define EMIF_EXT_PHY_CTRL_14_SHDW			0x026c
+#define EMIF_EXT_PHY_CTRL_15				0x0270
+#define EMIF_EXT_PHY_CTRL_15_SHDW			0x0274
+#define EMIF_EXT_PHY_CTRL_16				0x0278
+#define EMIF_EXT_PHY_CTRL_16_SHDW			0x027c
+#define EMIF_EXT_PHY_CTRL_17				0x0280
+#define EMIF_EXT_PHY_CTRL_17_SHDW			0x0284
+#define EMIF_EXT_PHY_CTRL_18				0x0288
+#define EMIF_EXT_PHY_CTRL_18_SHDW			0x028c
+#define EMIF_EXT_PHY_CTRL_19				0x0290
+#define EMIF_EXT_PHY_CTRL_19_SHDW			0x0294
+#define EMIF_EXT_PHY_CTRL_20				0x0298
+#define EMIF_EXT_PHY_CTRL_20_SHDW			0x029c
+#define EMIF_EXT_PHY_CTRL_21				0x02a0
+#define EMIF_EXT_PHY_CTRL_21_SHDW			0x02a4
+#define EMIF_EXT_PHY_CTRL_22				0x02a8
+#define EMIF_EXT_PHY_CTRL_22_SHDW			0x02ac
+#define EMIF_EXT_PHY_CTRL_23				0x02b0
+#define EMIF_EXT_PHY_CTRL_23_SHDW			0x02b4
+#define EMIF_EXT_PHY_CTRL_24				0x02b8
+#define EMIF_EXT_PHY_CTRL_24_SHDW			0x02bc
+#define EMIF_EXT_PHY_CTRL_25				0x02c0
+#define EMIF_EXT_PHY_CTRL_25_SHDW			0x02c4
+#define EMIF_EXT_PHY_CTRL_26				0x02c8
+#define EMIF_EXT_PHY_CTRL_26_SHDW			0x02cc
+#define EMIF_EXT_PHY_CTRL_27				0x02d0
+#define EMIF_EXT_PHY_CTRL_27_SHDW			0x02d4
+#define EMIF_EXT_PHY_CTRL_28				0x02d8
+#define EMIF_EXT_PHY_CTRL_28_SHDW			0x02dc
+#define EMIF_EXT_PHY_CTRL_29				0x02e0
+#define EMIF_EXT_PHY_CTRL_29_SHDW			0x02e4
+#define EMIF_EXT_PHY_CTRL_30				0x02e8
+#define EMIF_EXT_PHY_CTRL_30_SHDW			0x02ec
+
+/* Registers shifts and masks */
+
+/* EMIF_MODULE_ID_AND_REVISION */
+#define SCHEME_SHIFT					30
+#define SCHEME_MASK					(0x3 << 30)
+#define MODULE_ID_SHIFT					16
+#define MODULE_ID_MASK					(0xfff << 16)
+#define RTL_VERSION_SHIFT				11
+#define RTL_VERSION_MASK				(0x1f << 11)
+#define MAJOR_REVISION_SHIFT				8
+#define MAJOR_REVISION_MASK				(0x7 << 8)
+#define MINOR_REVISION_SHIFT				0
+#define MINOR_REVISION_MASK				(0x3f << 0)
+
+/* STATUS */
+#define BE_SHIFT					31
+#define BE_MASK						(1 << 31)
+#define DUAL_CLK_MODE_SHIFT				30
+#define DUAL_CLK_MODE_MASK				(1 << 30)
+#define FAST_INIT_SHIFT					29
+#define FAST_INIT_MASK					(1 << 29)
+#define RDLVLGATETO_SHIFT				6
+#define RDLVLGATETO_MASK				(1 << 6)
+#define RDLVLTO_SHIFT					5
+#define RDLVLTO_MASK					(1 << 5)
+#define WRLVLTO_SHIFT					4
+#define WRLVLTO_MASK					(1 << 4)
+#define PHY_DLL_READY_SHIFT				2
+#define PHY_DLL_READY_MASK				(1 << 2)
+
+/* SDRAM_CONFIG */
+#define SDRAM_TYPE_SHIFT				29
+#define SDRAM_TYPE_MASK					(0x7 << 29)
+#define IBANK_POS_SHIFT					27
+#define IBANK_POS_MASK					(0x3 << 27)
+#define DDR_TERM_SHIFT					24
+#define DDR_TERM_MASK					(0x7 << 24)
+#define DDR2_DDQS_SHIFT					23
+#define DDR2_DDQS_MASK					(1 << 23)
+#define DYN_ODT_SHIFT					21
+#define DYN_ODT_MASK					(0x3 << 21)
+#define DDR_DISABLE_DLL_SHIFT				20
+#define DDR_DISABLE_DLL_MASK				(1 << 20)
+#define SDRAM_DRIVE_SHIFT				18
+#define SDRAM_DRIVE_MASK				(0x3 << 18)
+#define CWL_SHIFT					16
+#define CWL_MASK					(0x3 << 16)
+#define NARROW_MODE_SHIFT				14
+#define NARROW_MODE_MASK				(0x3 << 14)
+#define CL_SHIFT					10
+#define CL_MASK						(0xf << 10)
+#define ROWSIZE_SHIFT					7
+#define ROWSIZE_MASK					(0x7 << 7)
+#define IBANK_SHIFT					4
+#define IBANK_MASK					(0x7 << 4)
+#define EBANK_SHIFT					3
+#define EBANK_MASK					(1 << 3)
+#define PAGESIZE_SHIFT					0
+#define PAGESIZE_MASK					(0x7 << 0)
+
+/* SDRAM_CONFIG_2 */
+#define CS1NVMEN_SHIFT					30
+#define CS1NVMEN_MASK					(1 << 30)
+#define EBANK_POS_SHIFT					27
+#define EBANK_POS_MASK					(1 << 27)
+#define RDBNUM_SHIFT					4
+#define RDBNUM_MASK					(0x3 << 4)
+#define RDBSIZE_SHIFT					0
+#define RDBSIZE_MASK					(0x7 << 0)
+
+/* SDRAM_REFRESH_CONTROL */
+#define INITREF_DIS_SHIFT				31
+#define INITREF_DIS_MASK				(1 << 31)
+#define SRT_SHIFT					29
+#define SRT_MASK					(1 << 29)
+#define ASR_SHIFT					28
+#define ASR_MASK					(1 << 28)
+#define PASR_SHIFT					24
+#define PASR_MASK					(0x7 << 24)
+#define REFRESH_RATE_SHIFT				0
+#define REFRESH_RATE_MASK				(0xffff << 0)
+
+/* SDRAM_TIMING_1 */
+#define T_RTW_SHIFT					29
+#define T_RTW_MASK					(0x7 << 29)
+#define T_RP_SHIFT					25
+#define T_RP_MASK					(0xf << 25)
+#define T_RCD_SHIFT					21
+#define T_RCD_MASK					(0xf << 21)
+#define T_WR_SHIFT					17
+#define T_WR_MASK					(0xf << 17)
+#define T_RAS_SHIFT					12
+#define T_RAS_MASK					(0x1f << 12)
+#define T_RC_SHIFT					6
+#define T_RC_MASK					(0x3f << 6)
+#define T_RRD_SHIFT					3
+#define T_RRD_MASK					(0x7 << 3)
+#define T_WTR_SHIFT					0
+#define T_WTR_MASK					(0x7 << 0)
+
+/* SDRAM_TIMING_2 */
+#define T_XP_SHIFT					28
+#define T_XP_MASK					(0x7 << 28)
+#define T_ODT_SHIFT					25
+#define T_ODT_MASK					(0x7 << 25)
+#define T_XSNR_SHIFT					16
+#define T_XSNR_MASK					(0x1ff << 16)
+#define T_XSRD_SHIFT					6
+#define T_XSRD_MASK					(0x3ff << 6)
+#define T_RTP_SHIFT					3
+#define T_RTP_MASK					(0x7 << 3)
+#define T_CKE_SHIFT					0
+#define T_CKE_MASK					(0x7 << 0)
+
+/* SDRAM_TIMING_3 */
+#define T_PDLL_UL_SHIFT					28
+#define T_PDLL_UL_MASK					(0xf << 28)
+#define T_CSTA_SHIFT					24
+#define T_CSTA_MASK					(0xf << 24)
+#define T_CKESR_SHIFT					21
+#define T_CKESR_MASK					(0x7 << 21)
+#define ZQ_ZQCS_SHIFT					15
+#define ZQ_ZQCS_MASK					(0x3f << 15)
+#define T_TDQSCKMAX_SHIFT				13
+#define T_TDQSCKMAX_MASK				(0x3 << 13)
+#define T_RFC_SHIFT					4
+#define T_RFC_MASK					(0x1ff << 4)
+#define T_RAS_MAX_SHIFT					0
+#define T_RAS_MAX_MASK					(0xf << 0)
+
+/* POWER_MANAGEMENT_CONTROL */
+#define PD_TIM_SHIFT					12
+#define PD_TIM_MASK					(0xf << 12)
+#define DPD_EN_SHIFT					11
+#define DPD_EN_MASK					(1 << 11)
+#define LP_MODE_SHIFT					8
+#define LP_MODE_MASK					(0x7 << 8)
+#define SR_TIM_SHIFT					4
+#define SR_TIM_MASK					(0xf << 4)
+#define CS_TIM_SHIFT					0
+#define CS_TIM_MASK					(0xf << 0)
+
+/* LPDDR2_MODE_REG_DATA */
+#define VALUE_0_SHIFT					0
+#define VALUE_0_MASK					(0x7f << 0)
+
+/* LPDDR2_MODE_REG_CONFIG */
+#define CS_SHIFT					31
+#define CS_MASK						(1 << 31)
+#define REFRESH_EN_SHIFT				30
+#define REFRESH_EN_MASK					(1 << 30)
+#define ADDRESS_SHIFT					0
+#define ADDRESS_MASK					(0xff << 0)
+
+/* OCP_CONFIG */
+#define SYS_THRESH_MAX_SHIFT				24
+#define SYS_THRESH_MAX_MASK				(0xf << 24)
+#define MPU_THRESH_MAX_SHIFT				20
+#define MPU_THRESH_MAX_MASK				(0xf << 20)
+#define LL_THRESH_MAX_SHIFT				16
+#define LL_THRESH_MAX_MASK				(0xf << 16)
+
+/* PERFORMANCE_COUNTER_1 */
+#define COUNTER1_SHIFT					0
+#define COUNTER1_MASK					(0xffffffff << 0)
+
+/* PERFORMANCE_COUNTER_2 */
+#define COUNTER2_SHIFT					0
+#define COUNTER2_MASK					(0xffffffff << 0)
+
+/* PERFORMANCE_COUNTER_CONFIG */
+#define CNTR2_MCONNID_EN_SHIFT				31
+#define CNTR2_MCONNID_EN_MASK				(1 << 31)
+#define CNTR2_REGION_EN_SHIFT				30
+#define CNTR2_REGION_EN_MASK				(1 << 30)
+#define CNTR2_CFG_SHIFT					16
+#define CNTR2_CFG_MASK					(0xf << 16)
+#define CNTR1_MCONNID_EN_SHIFT				15
+#define CNTR1_MCONNID_EN_MASK				(1 << 15)
+#define CNTR1_REGION_EN_SHIFT				14
+#define CNTR1_REGION_EN_MASK				(1 << 14)
+#define CNTR1_CFG_SHIFT					0
+#define CNTR1_CFG_MASK					(0xf << 0)
+
+/* PERFORMANCE_COUNTER_MASTER_REGION_SELECT */
+#define MCONNID2_SHIFT					24
+#define MCONNID2_MASK					(0xff << 24)
+#define REGION_SEL2_SHIFT				16
+#define REGION_SEL2_MASK				(0x3 << 16)
+#define MCONNID1_SHIFT					8
+#define MCONNID1_MASK					(0xff << 8)
+#define REGION_SEL1_SHIFT				0
+#define REGION_SEL1_MASK				(0x3 << 0)
+
+/* PERFORMANCE_COUNTER_TIME */
+#define TOTAL_TIME_SHIFT				0
+#define TOTAL_TIME_MASK					(0xffffffff << 0)
+
+/* DLL_CALIB_CTRL */
+#define ACK_WAIT_SHIFT					16
+#define ACK_WAIT_MASK					(0xf << 16)
+#define DLL_CALIB_INTERVAL_SHIFT			0
+#define DLL_CALIB_INTERVAL_MASK				(0x1ff << 0)
+
+/* END_OF_INTERRUPT */
+#define EOI_SHIFT					0
+#define EOI_MASK					(1 << 0)
+
+/* SYSTEM_OCP_INTERRUPT_RAW_STATUS */
+#define DNV_SYS_SHIFT					2
+#define DNV_SYS_MASK					(1 << 2)
+#define TA_SYS_SHIFT					1
+#define TA_SYS_MASK					(1 << 1)
+#define ERR_SYS_SHIFT					0
+#define ERR_SYS_MASK					(1 << 0)
+
+/* LOW_LATENCY_OCP_INTERRUPT_RAW_STATUS */
+#define DNV_LL_SHIFT					2
+#define DNV_LL_MASK					(1 << 2)
+#define TA_LL_SHIFT					1
+#define TA_LL_MASK					(1 << 1)
+#define ERR_LL_SHIFT					0
+#define ERR_LL_MASK					(1 << 0)
+
+/* SYSTEM_OCP_INTERRUPT_ENABLE_SET */
+#define EN_DNV_SYS_SHIFT				2
+#define EN_DNV_SYS_MASK					(1 << 2)
+#define EN_TA_SYS_SHIFT					1
+#define EN_TA_SYS_MASK					(1 << 1)
+#define EN_ERR_SYS_SHIFT					0
+#define EN_ERR_SYS_MASK					(1 << 0)
+
+/* LOW_LATENCY_OCP_INTERRUPT_ENABLE_SET */
+#define EN_DNV_LL_SHIFT					2
+#define EN_DNV_LL_MASK					(1 << 2)
+#define EN_TA_LL_SHIFT					1
+#define EN_TA_LL_MASK					(1 << 1)
+#define EN_ERR_LL_SHIFT					0
+#define EN_ERR_LL_MASK					(1 << 0)
+
+/* SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG */
+#define ZQ_CS1EN_SHIFT					31
+#define ZQ_CS1EN_MASK					(1 << 31)
+#define ZQ_CS0EN_SHIFT					30
+#define ZQ_CS0EN_MASK					(1 << 30)
+#define ZQ_DUALCALEN_SHIFT				29
+#define ZQ_DUALCALEN_MASK				(1 << 29)
+#define ZQ_SFEXITEN_SHIFT				28
+#define ZQ_SFEXITEN_MASK				(1 << 28)
+#define ZQ_ZQINIT_MULT_SHIFT				18
+#define ZQ_ZQINIT_MULT_MASK				(0x3 << 18)
+#define ZQ_ZQCL_MULT_SHIFT				16
+#define ZQ_ZQCL_MULT_MASK				(0x3 << 16)
+#define ZQ_REFINTERVAL_SHIFT				0
+#define ZQ_REFINTERVAL_MASK				(0xffff << 0)
+
+/* TEMPERATURE_ALERT_CONFIG */
+#define TA_CS1EN_SHIFT					31
+#define TA_CS1EN_MASK					(1 << 31)
+#define TA_CS0EN_SHIFT					30
+#define TA_CS0EN_MASK					(1 << 30)
+#define TA_SFEXITEN_SHIFT				28
+#define TA_SFEXITEN_MASK				(1 << 28)
+#define TA_DEVWDT_SHIFT					26
+#define TA_DEVWDT_MASK					(0x3 << 26)
+#define TA_DEVCNT_SHIFT					24
+#define TA_DEVCNT_MASK					(0x3 << 24)
+#define TA_REFINTERVAL_SHIFT				0
+#define TA_REFINTERVAL_MASK				(0x3fffff << 0)
+
+/* OCP_ERROR_LOG */
+#define MADDRSPACE_SHIFT				14
+#define MADDRSPACE_MASK					(0x3 << 14)
+#define MBURSTSEQ_SHIFT					11
+#define MBURSTSEQ_MASK					(0x7 << 11)
+#define MCMD_SHIFT					8
+#define MCMD_MASK					(0x7 << 8)
+#define MCONNID_SHIFT					0
+#define MCONNID_MASK					(0xff << 0)
+
+/* DDR_PHY_CTRL_1 - EMIF4D */
+#define DLL_SLAVE_DLY_CTRL_SHIFT_4D			4
+#define DLL_SLAVE_DLY_CTRL_MASK_4D			(0xFF << 4)
+#define READ_LATENCY_SHIFT_4D				0
+#define READ_LATENCY_MASK_4D				(0xf << 0)
+
+/* DDR_PHY_CTRL_1 - EMIF4D5 */
+#define DLL_HALF_DELAY_SHIFT_4D5			21
+#define DLL_HALF_DELAY_MASK_4D5				(1 << 21)
+#define READ_LATENCY_SHIFT_4D5				0
+#define READ_LATENCY_MASK_4D5				(0x1f << 0)
+
+/* DDR_PHY_CTRL_1_SHDW */
+#define DDR_PHY_CTRL_1_SHDW_SHIFT			5
+#define DDR_PHY_CTRL_1_SHDW_MASK			(0x7ffffff << 5)
+#define READ_LATENCY_SHDW_SHIFT				0
+#define READ_LATENCY_SHDW_MASK				(0x1f << 0)
+
+#ifndef __ASSEMBLY__
+/*
+ * Structure containing shadow of important registers in EMIF
+ * The calculation function fills in this structure to be later used for
+ * initialisation and DVFS
+ */
+struct emif_regs {
+	u32 freq;
+	u32 ref_ctrl_shdw;
+	u32 ref_ctrl_shdw_derated;
+	u32 sdram_tim1_shdw;
+	u32 sdram_tim1_shdw_derated;
+	u32 sdram_tim2_shdw;
+	u32 sdram_tim3_shdw;
+	u32 sdram_tim3_shdw_derated;
+	u32 pwr_mgmt_ctrl_shdw;
+	union {
+		u32 read_idle_ctrl_shdw_normal;
+		u32 dll_calib_ctrl_shdw_normal;
+	};
+	union {
+		u32 read_idle_ctrl_shdw_volt_ramp;
+		u32 dll_calib_ctrl_shdw_volt_ramp;
+	};
+
+	u32 phy_ctrl_1_shdw;
+	u32 ext_phy_ctrl_2_shdw;
+	u32 ext_phy_ctrl_3_shdw;
+	u32 ext_phy_ctrl_4_shdw;
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __EMIF_H */
diff --git a/drivers/memory/tegra20-mc.c b/drivers/memory/tegra20-mc.c
new file mode 100644
index 00000000000..3ed49c1c2b9
--- /dev/null
+++ b/drivers/memory/tegra20-mc.c
@@ -0,0 +1,257 @@
+/*
+ * Tegra20 Memory Controller
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ratelimit.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#define DRV_NAME "tegra20-mc"
+
+#define MC_INTSTATUS			0x0
+#define MC_INTMASK			0x4
+
+#define MC_INT_ERR_SHIFT		6
+#define MC_INT_ERR_MASK			(0x1f << MC_INT_ERR_SHIFT)
+#define MC_INT_DECERR_EMEM		BIT(MC_INT_ERR_SHIFT)
+#define MC_INT_INVALID_GART_PAGE	BIT(MC_INT_ERR_SHIFT + 1)
+#define MC_INT_SECURITY_VIOLATION	BIT(MC_INT_ERR_SHIFT + 2)
+#define MC_INT_ARBITRATION_EMEM		BIT(MC_INT_ERR_SHIFT + 3)
+
+#define MC_GART_ERROR_REQ		0x30
+#define MC_DECERR_EMEM_OTHERS_STATUS	0x58
+#define MC_SECURITY_VIOLATION_STATUS	0x74
+
+#define SECURITY_VIOLATION_TYPE		BIT(30)	/* 0=TRUSTZONE, 1=CARVEOUT */
+
+#define MC_CLIENT_ID_MASK		0x3f
+
+#define NUM_MC_REG_BANKS		2
+
+struct tegra20_mc {
+	void __iomem *regs[NUM_MC_REG_BANKS];
+	struct device *dev;
+};
+
+static inline u32 mc_readl(struct tegra20_mc *mc, u32 offs)
+{
+	u32 val = 0;
+
+	if (offs < 0x24)
+		val = readl(mc->regs[0] + offs);
+	if (offs < 0x400)
+		val = readl(mc->regs[1] + offs - 0x3c);
+
+	return val;
+}
+
+static inline void mc_writel(struct tegra20_mc *mc, u32 val, u32 offs)
+{
+	if (offs < 0x24) {
+		writel(val, mc->regs[0] + offs);
+		return;
+	}
+	if (offs < 0x400) {
+		writel(val, mc->regs[1] + offs - 0x3c);
+		return;
+	}
+}
+
+static const char * const tegra20_mc_client[] = {
+	"cbr_display0a",
+	"cbr_display0ab",
+	"cbr_display0b",
+	"cbr_display0bb",
+	"cbr_display0c",
+	"cbr_display0cb",
+	"cbr_display1b",
+	"cbr_display1bb",
+	"cbr_eppup",
+	"cbr_g2pr",
+	"cbr_g2sr",
+	"cbr_mpeunifbr",
+	"cbr_viruv",
+	"csr_avpcarm7r",
+	"csr_displayhc",
+	"csr_displayhcb",
+	"csr_fdcdrd",
+	"csr_g2dr",
+	"csr_host1xdmar",
+	"csr_host1xr",
+	"csr_idxsrd",
+	"csr_mpcorer",
+	"csr_mpe_ipred",
+	"csr_mpeamemrd",
+	"csr_mpecsrd",
+	"csr_ppcsahbdmar",
+	"csr_ppcsahbslvr",
+	"csr_texsrd",
+	"csr_vdebsevr",
+	"csr_vdember",
+	"csr_vdemcer",
+	"csr_vdetper",
+	"cbw_eppu",
+	"cbw_eppv",
+	"cbw_eppy",
+	"cbw_mpeunifbw",
+	"cbw_viwsb",
+	"cbw_viwu",
+	"cbw_viwv",
+	"cbw_viwy",
+	"ccw_g2dw",
+	"csw_avpcarm7w",
+	"csw_fdcdwr",
+	"csw_host1xw",
+	"csw_ispw",
+	"csw_mpcorew",
+	"csw_mpecswr",
+	"csw_ppcsahbdmaw",
+	"csw_ppcsahbslvw",
+	"csw_vdebsevw",
+	"csw_vdembew",
+	"csw_vdetpmw",
+};
+
+static void tegra20_mc_decode(struct tegra20_mc *mc, int n)
+{
+	u32 addr, req;
+	const char *client = "Unknown";
+	int idx, cid;
+	const struct reg_info {
+		u32 offset;
+		u32 write_bit;	/* 0=READ, 1=WRITE */
+		int cid_shift;
+		char *message;
+	} reg[] = {
+		{
+			.offset = MC_DECERR_EMEM_OTHERS_STATUS,
+			.write_bit = 31,
+			.message = "MC_DECERR",
+		},
+		{
+			.offset	= MC_GART_ERROR_REQ,
+			.cid_shift = 1,
+			.message = "MC_GART_ERR",
+
+		},
+		{
+			.offset = MC_SECURITY_VIOLATION_STATUS,
+			.write_bit = 31,
+			.message = "MC_SECURITY_ERR",
+		},
+	};
+
+	idx = n - MC_INT_ERR_SHIFT;
+	if ((idx < 0) || (idx >= ARRAY_SIZE(reg))) {
+		dev_err_ratelimited(mc->dev, "Unknown interrupt status %08lx\n",
+				    BIT(n));
+		return;
+	}
+
+	req = mc_readl(mc, reg[idx].offset);
+	cid = (req >> reg[idx].cid_shift) & MC_CLIENT_ID_MASK;
+	if (cid < ARRAY_SIZE(tegra20_mc_client))
+		client = tegra20_mc_client[cid];
+
+	addr = mc_readl(mc, reg[idx].offset + sizeof(u32));
+
+	dev_err_ratelimited(mc->dev, "%s (0x%08x): 0x%08x %s (%s %s)\n",
+			   reg[idx].message, req, addr, client,
+			   (req & BIT(reg[idx].write_bit)) ? "write" : "read",
+			   (reg[idx].offset == MC_SECURITY_VIOLATION_STATUS) ?
+			   ((req & SECURITY_VIOLATION_TYPE) ?
+			    "carveout" : "trustzone") : "");
+}
+
+static const struct of_device_id tegra20_mc_of_match[] __devinitconst = {
+	{ .compatible = "nvidia,tegra20-mc", },
+	{},
+};
+
+static irqreturn_t tegra20_mc_isr(int irq, void *data)
+{
+	u32 stat, mask, bit;
+	struct tegra20_mc *mc = data;
+
+	stat = mc_readl(mc, MC_INTSTATUS);
+	mask = mc_readl(mc, MC_INTMASK);
+	mask &= stat;
+	if (!mask)
+		return IRQ_NONE;
+	while ((bit = ffs(mask)) != 0)
+		tegra20_mc_decode(mc, bit - 1);
+	mc_writel(mc, stat, MC_INTSTATUS);
+	return IRQ_HANDLED;
+}
+
+static int __devinit tegra20_mc_probe(struct platform_device *pdev)
+{
+	struct resource *irq;
+	struct tegra20_mc *mc;
+	int i, err;
+	u32 intmask;
+
+	mc = devm_kzalloc(&pdev->dev, sizeof(*mc), GFP_KERNEL);
+	if (!mc)
+		return -ENOMEM;
+	mc->dev = &pdev->dev;
+
+	for (i = 0; i < ARRAY_SIZE(mc->regs); i++) {
+		struct resource *res;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
+			return -ENODEV;
+		mc->regs[i] = devm_request_and_ioremap(&pdev->dev, res);
+		if (!mc->regs[i])
+			return -EBUSY;
+	}
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq)
+		return -ENODEV;
+	err = devm_request_irq(&pdev->dev, irq->start, tegra20_mc_isr,
+			       IRQF_SHARED, dev_name(&pdev->dev), mc);
+	if (err)
+		return -ENODEV;
+
+	platform_set_drvdata(pdev, mc);
+
+	intmask = MC_INT_INVALID_GART_PAGE |
+		MC_INT_DECERR_EMEM | MC_INT_SECURITY_VIOLATION;
+	mc_writel(mc, intmask, MC_INTMASK);
+	return 0;
+}
+
+static struct platform_driver tegra20_mc_driver = {
+	.probe = tegra20_mc_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = tegra20_mc_of_match,
+	},
+};
+module_platform_driver(tegra20_mc_driver);
+
+MODULE_AUTHOR("Hiroshi DOYU <hdoyu@nvidia.com>");
+MODULE_DESCRIPTION("Tegra20 MC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/memory/tegra30-mc.c b/drivers/memory/tegra30-mc.c
new file mode 100644
index 00000000000..e56ff04eb5c
--- /dev/null
+++ b/drivers/memory/tegra30-mc.c
@@ -0,0 +1,382 @@
+/*
+ * Tegra30 Memory Controller
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ratelimit.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#define DRV_NAME "tegra30-mc"
+
+#define MC_INTSTATUS			0x0
+#define MC_INTMASK			0x4
+
+#define MC_INT_ERR_SHIFT		6
+#define MC_INT_ERR_MASK			(0x1f << MC_INT_ERR_SHIFT)
+#define MC_INT_DECERR_EMEM		BIT(MC_INT_ERR_SHIFT)
+#define MC_INT_SECURITY_VIOLATION	BIT(MC_INT_ERR_SHIFT + 2)
+#define MC_INT_ARBITRATION_EMEM		BIT(MC_INT_ERR_SHIFT + 3)
+#define MC_INT_INVALID_SMMU_PAGE	BIT(MC_INT_ERR_SHIFT + 4)
+
+#define MC_ERR_STATUS			0x8
+#define MC_ERR_ADR			0xc
+
+#define MC_ERR_TYPE_SHIFT		28
+#define MC_ERR_TYPE_MASK		(7 << MC_ERR_TYPE_SHIFT)
+#define MC_ERR_TYPE_DECERR_EMEM		2
+#define MC_ERR_TYPE_SECURITY_TRUSTZONE	3
+#define MC_ERR_TYPE_SECURITY_CARVEOUT	4
+#define MC_ERR_TYPE_INVALID_SMMU_PAGE	6
+
+#define MC_ERR_INVALID_SMMU_PAGE_SHIFT	25
+#define MC_ERR_INVALID_SMMU_PAGE_MASK	(7 << MC_ERR_INVALID_SMMU_PAGE_SHIFT)
+#define MC_ERR_RW_SHIFT			16
+#define MC_ERR_RW			BIT(MC_ERR_RW_SHIFT)
+#define MC_ERR_SECURITY			BIT(MC_ERR_RW_SHIFT + 1)
+
+#define SECURITY_VIOLATION_TYPE		BIT(30)	/* 0=TRUSTZONE, 1=CARVEOUT */
+
+#define MC_EMEM_ARB_CFG			0x90
+#define MC_EMEM_ARB_OUTSTANDING_REQ	0x94
+#define MC_EMEM_ARB_TIMING_RCD		0x98
+#define MC_EMEM_ARB_TIMING_RP		0x9c
+#define MC_EMEM_ARB_TIMING_RC		0xa0
+#define MC_EMEM_ARB_TIMING_RAS		0xa4
+#define MC_EMEM_ARB_TIMING_FAW		0xa8
+#define MC_EMEM_ARB_TIMING_RRD		0xac
+#define MC_EMEM_ARB_TIMING_RAP2PRE	0xb0
+#define MC_EMEM_ARB_TIMING_WAP2PRE	0xb4
+#define MC_EMEM_ARB_TIMING_R2R		0xb8
+#define MC_EMEM_ARB_TIMING_W2W		0xbc
+#define MC_EMEM_ARB_TIMING_R2W		0xc0
+#define MC_EMEM_ARB_TIMING_W2R		0xc4
+
+#define MC_EMEM_ARB_DA_TURNS		0xd0
+#define MC_EMEM_ARB_DA_COVERS		0xd4
+#define MC_EMEM_ARB_MISC0		0xd8
+#define MC_EMEM_ARB_MISC1		0xdc
+
+#define MC_EMEM_ARB_RING3_THROTTLE	0xe4
+#define MC_EMEM_ARB_OVERRIDE		0xe8
+
+#define MC_TIMING_CONTROL		0xfc
+
+#define MC_CLIENT_ID_MASK		0x7f
+
+#define NUM_MC_REG_BANKS		4
+
+struct tegra30_mc {
+	void __iomem *regs[NUM_MC_REG_BANKS];
+	struct device *dev;
+	u32 ctx[0];
+};
+
+static inline u32 mc_readl(struct tegra30_mc *mc, u32 offs)
+{
+	u32 val = 0;
+
+	if (offs < 0x10)
+		val = readl(mc->regs[0] + offs);
+	if (offs < 0x1f0)
+		val = readl(mc->regs[1] + offs - 0x3c);
+	if (offs < 0x228)
+		val = readl(mc->regs[2] + offs - 0x200);
+	if (offs < 0x400)
+		val = readl(mc->regs[3] + offs - 0x284);
+
+	return val;
+}
+
+static inline void mc_writel(struct tegra30_mc *mc, u32 val, u32 offs)
+{
+	if (offs < 0x10) {
+		writel(val, mc->regs[0] + offs);
+		return;
+	}
+	if (offs < 0x1f0) {
+		writel(val, mc->regs[1] + offs - 0x3c);
+		return;
+	}
+	if (offs < 0x228) {
+		writel(val, mc->regs[2] + offs - 0x200);
+		return;
+	}
+	if (offs < 0x400) {
+		writel(val, mc->regs[3] + offs - 0x284);
+		return;
+	}
+}
+
+static const char * const tegra30_mc_client[] = {
+	"csr_ptcr",
+	"cbr_display0a",
+	"cbr_display0ab",
+	"cbr_display0b",
+	"cbr_display0bb",
+	"cbr_display0c",
+	"cbr_display0cb",
+	"cbr_display1b",
+	"cbr_display1bb",
+	"cbr_eppup",
+	"cbr_g2pr",
+	"cbr_g2sr",
+	"cbr_mpeunifbr",
+	"cbr_viruv",
+	"csr_afir",
+	"csr_avpcarm7r",
+	"csr_displayhc",
+	"csr_displayhcb",
+	"csr_fdcdrd",
+	"csr_fdcdrd2",
+	"csr_g2dr",
+	"csr_hdar",
+	"csr_host1xdmar",
+	"csr_host1xr",
+	"csr_idxsrd",
+	"csr_idxsrd2",
+	"csr_mpe_ipred",
+	"csr_mpeamemrd",
+	"csr_mpecsrd",
+	"csr_ppcsahbdmar",
+	"csr_ppcsahbslvr",
+	"csr_satar",
+	"csr_texsrd",
+	"csr_texsrd2",
+	"csr_vdebsevr",
+	"csr_vdember",
+	"csr_vdemcer",
+	"csr_vdetper",
+	"csr_mpcorelpr",
+	"csr_mpcorer",
+	"cbw_eppu",
+	"cbw_eppv",
+	"cbw_eppy",
+	"cbw_mpeunifbw",
+	"cbw_viwsb",
+	"cbw_viwu",
+	"cbw_viwv",
+	"cbw_viwy",
+	"ccw_g2dw",
+	"csw_afiw",
+	"csw_avpcarm7w",
+	"csw_fdcdwr",
+	"csw_fdcdwr2",
+	"csw_hdaw",
+	"csw_host1xw",
+	"csw_ispw",
+	"csw_mpcorelpw",
+	"csw_mpcorew",
+	"csw_mpecswr",
+	"csw_ppcsahbdmaw",
+	"csw_ppcsahbslvw",
+	"csw_sataw",
+	"csw_vdebsevw",
+	"csw_vdedbgw",
+	"csw_vdembew",
+	"csw_vdetpmw",
+};
+
+static void tegra30_mc_decode(struct tegra30_mc *mc, int n)
+{
+	u32 err, addr;
+	const char * const mc_int_err[] = {
+		"MC_DECERR",
+		"Unknown",
+		"MC_SECURITY_ERR",
+		"MC_ARBITRATION_EMEM",
+		"MC_SMMU_ERR",
+	};
+	const char * const err_type[] = {
+		"Unknown",
+		"Unknown",
+		"DECERR_EMEM",
+		"SECURITY_TRUSTZONE",
+		"SECURITY_CARVEOUT",
+		"Unknown",
+		"INVALID_SMMU_PAGE",
+		"Unknown",
+	};
+	char attr[6];
+	int cid, perm, type, idx;
+	const char *client = "Unknown";
+
+	idx = n - MC_INT_ERR_SHIFT;
+	if ((idx < 0) || (idx >= ARRAY_SIZE(mc_int_err)) || (idx == 1)) {
+		dev_err_ratelimited(mc->dev, "Unknown interrupt status %08lx\n",
+				    BIT(n));
+		return;
+	}
+
+	err = readl(mc + MC_ERR_STATUS);
+
+	type = (err & MC_ERR_TYPE_MASK) >> MC_ERR_TYPE_SHIFT;
+	perm = (err & MC_ERR_INVALID_SMMU_PAGE_MASK) >>
+		MC_ERR_INVALID_SMMU_PAGE_SHIFT;
+	if (type == MC_ERR_TYPE_INVALID_SMMU_PAGE)
+		sprintf(attr, "%c-%c-%c",
+			(perm & BIT(2)) ? 'R' : '-',
+			(perm & BIT(1)) ? 'W' : '-',
+			(perm & BIT(0)) ? 'S' : '-');
+	else
+		attr[0] = '\0';
+
+	cid = err & MC_CLIENT_ID_MASK;
+	if (cid < ARRAY_SIZE(tegra30_mc_client))
+		client = tegra30_mc_client[cid];
+
+	addr = readl(mc + MC_ERR_ADR);
+
+	dev_err_ratelimited(mc->dev, "%s (0x%08x): 0x%08x %s (%s %s %s %s)\n",
+			   mc_int_err[idx], err, addr, client,
+			   (err & MC_ERR_SECURITY) ? "secure" : "non-secure",
+			   (err & MC_ERR_RW) ? "write" : "read",
+			   err_type[type], attr);
+}
+
+static const u32 tegra30_mc_ctx[] = {
+	MC_EMEM_ARB_CFG,
+	MC_EMEM_ARB_OUTSTANDING_REQ,
+	MC_EMEM_ARB_TIMING_RCD,
+	MC_EMEM_ARB_TIMING_RP,
+	MC_EMEM_ARB_TIMING_RC,
+	MC_EMEM_ARB_TIMING_RAS,
+	MC_EMEM_ARB_TIMING_FAW,
+	MC_EMEM_ARB_TIMING_RRD,
+	MC_EMEM_ARB_TIMING_RAP2PRE,
+	MC_EMEM_ARB_TIMING_WAP2PRE,
+	MC_EMEM_ARB_TIMING_R2R,
+	MC_EMEM_ARB_TIMING_W2W,
+	MC_EMEM_ARB_TIMING_R2W,
+	MC_EMEM_ARB_TIMING_W2R,
+	MC_EMEM_ARB_DA_TURNS,
+	MC_EMEM_ARB_DA_COVERS,
+	MC_EMEM_ARB_MISC0,
+	MC_EMEM_ARB_MISC1,
+	MC_EMEM_ARB_RING3_THROTTLE,
+	MC_EMEM_ARB_OVERRIDE,
+	MC_INTMASK,
+};
+
+static int tegra30_mc_suspend(struct device *dev)
+{
+	int i;
+	struct tegra30_mc *mc = dev_get_drvdata(dev);
+
+	for (i = 0; i < ARRAY_SIZE(tegra30_mc_ctx); i++)
+		mc->ctx[i] = mc_readl(mc, tegra30_mc_ctx[i]);
+	return 0;
+}
+
+static int tegra30_mc_resume(struct device *dev)
+{
+	int i;
+	struct tegra30_mc *mc = dev_get_drvdata(dev);
+
+	for (i = 0; i < ARRAY_SIZE(tegra30_mc_ctx); i++)
+		mc_writel(mc, mc->ctx[i], tegra30_mc_ctx[i]);
+
+	mc_writel(mc, 1, MC_TIMING_CONTROL);
+	/* Read-back to ensure that write reached */
+	mc_readl(mc, MC_TIMING_CONTROL);
+	return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(tegra30_mc_pm,
+			    tegra30_mc_suspend,
+			    tegra30_mc_resume, NULL);
+
+static const struct of_device_id tegra30_mc_of_match[] __devinitconst = {
+	{ .compatible = "nvidia,tegra30-mc", },
+	{},
+};
+
+static irqreturn_t tegra30_mc_isr(int irq, void *data)
+{
+	u32 stat, mask, bit;
+	struct tegra30_mc *mc = data;
+
+	stat = mc_readl(mc, MC_INTSTATUS);
+	mask = mc_readl(mc, MC_INTMASK);
+	mask &= stat;
+	if (!mask)
+		return IRQ_NONE;
+	while ((bit = ffs(mask)) != 0)
+		tegra30_mc_decode(mc, bit - 1);
+	mc_writel(mc, stat, MC_INTSTATUS);
+	return IRQ_HANDLED;
+}
+
+static int __devinit tegra30_mc_probe(struct platform_device *pdev)
+{
+	struct resource *irq;
+	struct tegra30_mc *mc;
+	size_t bytes;
+	int err, i;
+	u32 intmask;
+
+	bytes = sizeof(*mc) + sizeof(u32) * ARRAY_SIZE(tegra30_mc_ctx);
+	mc = devm_kzalloc(&pdev->dev, bytes, GFP_KERNEL);
+	if (!mc)
+		return -ENOMEM;
+	mc->dev = &pdev->dev;
+
+	for (i = 0; i < ARRAY_SIZE(mc->regs); i++) {
+		struct resource *res;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res)
+			return -ENODEV;
+		mc->regs[i] = devm_request_and_ioremap(&pdev->dev, res);
+		if (!mc->regs[i])
+			return -EBUSY;
+	}
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq)
+		return -ENODEV;
+	err = devm_request_irq(&pdev->dev, irq->start, tegra30_mc_isr,
+			       IRQF_SHARED, dev_name(&pdev->dev), mc);
+	if (err)
+		return -ENODEV;
+
+	platform_set_drvdata(pdev, mc);
+
+	intmask = MC_INT_INVALID_SMMU_PAGE |
+		MC_INT_DECERR_EMEM | MC_INT_SECURITY_VIOLATION;
+	mc_writel(mc, intmask, MC_INTMASK);
+	return 0;
+}
+
+static struct platform_driver tegra30_mc_driver = {
+	.probe = tegra30_mc_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = tegra30_mc_of_match,
+		.pm = &tegra30_mc_pm,
+	},
+};
+module_platform_driver(tegra30_mc_driver);
+
+MODULE_AUTHOR("Hiroshi DOYU <hdoyu@nvidia.com>");
+MODULE_DESCRIPTION("Tegra30 MC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 96846955595..757fbd0f2a1 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -508,14 +508,6 @@ config USB_SWITCH_FSA9480
 	  stereo and mono audio, video, microphone and UART data to use
 	  a common connector port.
 
-config MAX8997_MUIC
-	tristate "MAX8997 MUIC Support"
-	depends on MFD_MAX8997
-	help
-	  If you say yes here you get support for the MUIC device of
-	  Maxim MAX8997 PMIC.
-	  The MAX8997 MUIC is a USB port accessory detector and switch.
-
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 509d0569dc0..162861788c6 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -50,4 +50,3 @@ obj-y				+= lis3lv02d/
 obj-y				+= carma/
 obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
 obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
-obj-$(CONFIG_MAX8997_MUIC)	+= max8997-muic.o
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 402956321d3..5abffe58a9d 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2075,7 +2075,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 
 	printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
 	if (p->base_hi && priv->ecr)
-		printk(" (0x%lx)", p->base_hi);
+		printk(KERN_CONT " (0x%lx)", p->base_hi);
 	if (p->irq == PARPORT_IRQ_AUTO) {
 		p->irq = PARPORT_IRQ_NONE;
 		parport_irq_probe(p);
@@ -2086,7 +2086,7 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 		p->irq = PARPORT_IRQ_NONE;
 	}
 	if (p->irq != PARPORT_IRQ_NONE) {
-		printk(", irq %d", p->irq);
+		printk(KERN_CONT ", irq %d", p->irq);
 		priv->ctr_writable |= 0x10;
 
 		if (p->dma == PARPORT_DMA_AUTO) {
@@ -2110,21 +2110,21 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 		/* p->ops->ecp_read_data = parport_pc_ecp_read_block_pio; */
 #endif /* IEEE 1284 support */
 		if (p->dma != PARPORT_DMA_NONE) {
-			printk(", dma %d", p->dma);
+			printk(KERN_CONT ", dma %d", p->dma);
 			p->modes |= PARPORT_MODE_DMA;
 		} else
-			printk(", using FIFO");
+			printk(KERN_CONT ", using FIFO");
 	} else
 		/* We can't use the DMA channel after all. */
 		p->dma = PARPORT_DMA_NONE;
 #endif /* Allowed to use FIFO/DMA */
 
-	printk(" [");
+	printk(KERN_CONT " [");
 
 #define printmode(x) \
 	{\
 		if (p->modes & PARPORT_MODE_##x) {\
-			printk("%s%s", f ? "," : "", #x);\
+			printk(KERN_CONT "%s%s", f ? "," : "", #x);\
 			f++;\
 		} \
 	}
@@ -2140,9 +2140,9 @@ struct parport *parport_pc_probe_port(unsigned long int base,
 	}
 #undef printmode
 #ifndef CONFIG_PARPORT_1284
-	printk("(,...)");
+	printk(KERN_CONT "(,...)");
 #endif /* CONFIG_PARPORT_1284 */
-	printk("]\n");
+	printk(KERN_CONT "]\n");
 	if (probedirq != PARPORT_IRQ_NONE)
 		printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
 
diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig
index eb1dee26bda..c706635f3f8 100644
--- a/drivers/staging/android/Kconfig
+++ b/drivers/staging/android/Kconfig
@@ -53,8 +53,6 @@ config ANDROID_LOW_MEMORY_KILLER
 	---help---
 	  Register processes to be killed when memory is low
 
-source "drivers/staging/android/switch/Kconfig"
-
 config ANDROID_INTF_ALARM
 	bool "Android alarm driver"
 	depends on RTC_CLASS
@@ -80,7 +78,6 @@ config ANDROID_ALARM_OLDDRV_COMPAT
 	  Provides preprocessor alias to aid compatability with
 	  older out-of-tree drivers that use the Android Alarm
 	  in-kernel API. This will be removed eventually.
-
 endif # if ANDROID
 
 endmenu
diff --git a/drivers/staging/android/Makefile b/drivers/staging/android/Makefile
index 9b6c9ed91f6..045d17bde52 100644
--- a/drivers/staging/android/Makefile
+++ b/drivers/staging/android/Makefile
@@ -6,6 +6,5 @@ obj-$(CONFIG_ANDROID_RAM_CONSOLE)	+= ram_console.o
 obj-$(CONFIG_ANDROID_TIMED_OUTPUT)	+= timed_output.o
 obj-$(CONFIG_ANDROID_TIMED_GPIO)	+= timed_gpio.o
 obj-$(CONFIG_ANDROID_LOW_MEMORY_KILLER)	+= lowmemorykiller.o
-obj-$(CONFIG_ANDROID_SWITCH)		+= switch/
 obj-$(CONFIG_ANDROID_INTF_ALARM)	+= alarm.o
 obj-$(CONFIG_ANDROID_INTF_ALARM_DEV)	+= alarm-dev.o
diff --git a/drivers/staging/android/switch/Kconfig b/drivers/staging/android/switch/Kconfig
deleted file mode 100644
index 36846f62f4b..00000000000
--- a/drivers/staging/android/switch/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-menuconfig ANDROID_SWITCH
-	tristate "Android Switch class support"
-	help
-	  Say Y here to enable Android switch class support. This allows
-	  monitoring switches by userspace via sysfs and uevent.
-
-config ANDROID_SWITCH_GPIO
-	tristate "Android GPIO Switch support"
-	depends on GENERIC_GPIO && ANDROID_SWITCH
-	help
-	  Say Y here to enable GPIO based switch support.
diff --git a/drivers/staging/android/switch/Makefile b/drivers/staging/android/switch/Makefile
deleted file mode 100644
index d76bfdcedfa..00000000000
--- a/drivers/staging/android/switch/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# Android Switch Class Driver
-obj-$(CONFIG_ANDROID_SWITCH)		+= switch_class.o
-obj-$(CONFIG_ANDROID_SWITCH_GPIO)	+= switch_gpio.o
-
diff --git a/drivers/staging/android/switch/switch.h b/drivers/staging/android/switch/switch.h
deleted file mode 100644
index 4fcb3109875..00000000000
--- a/drivers/staging/android/switch/switch.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  Switch class driver
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
-*/
-
-#ifndef __LINUX_SWITCH_H__
-#define __LINUX_SWITCH_H__
-
-struct switch_dev {
-	const char	*name;
-	struct device	*dev;
-	int		index;
-	int		state;
-
-	ssize_t	(*print_name)(struct switch_dev *sdev, char *buf);
-	ssize_t	(*print_state)(struct switch_dev *sdev, char *buf);
-};
-
-struct gpio_switch_platform_data {
-	const char *name;
-	unsigned	gpio;
-
-	/* if NULL, switch_dev.name will be printed */
-	const char *name_on;
-	const char *name_off;
-	/* if NULL, "0" or "1" will be printed */
-	const char *state_on;
-	const char *state_off;
-};
-
-extern int switch_dev_register(struct switch_dev *sdev);
-extern void switch_dev_unregister(struct switch_dev *sdev);
-
-static inline int switch_get_state(struct switch_dev *sdev)
-{
-	return sdev->state;
-}
-
-extern void switch_set_state(struct switch_dev *sdev, int state);
-
-#endif /* __LINUX_SWITCH_H__ */
diff --git a/drivers/staging/android/switch/switch_class.c b/drivers/staging/android/switch/switch_class.c
deleted file mode 100644
index 74680446fc6..00000000000
--- a/drivers/staging/android/switch/switch_class.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * switch_class.c
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/err.h>
-#include "switch.h"
-
-struct class *switch_class;
-static atomic_t device_count;
-
-static ssize_t state_show(struct device *dev, struct device_attribute *attr,
-		char *buf)
-{
-	struct switch_dev *sdev = (struct switch_dev *)
-		dev_get_drvdata(dev);
-
-	if (sdev->print_state) {
-		int ret = sdev->print_state(sdev, buf);
-		if (ret >= 0)
-			return ret;
-	}
-	return sprintf(buf, "%d\n", sdev->state);
-}
-
-static ssize_t name_show(struct device *dev, struct device_attribute *attr,
-		char *buf)
-{
-	struct switch_dev *sdev = (struct switch_dev *)
-		dev_get_drvdata(dev);
-
-	if (sdev->print_name) {
-		int ret = sdev->print_name(sdev, buf);
-		if (ret >= 0)
-			return ret;
-	}
-	return sprintf(buf, "%s\n", sdev->name);
-}
-
-static DEVICE_ATTR(state, S_IRUGO | S_IWUSR, state_show, NULL);
-static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, name_show, NULL);
-
-void switch_set_state(struct switch_dev *sdev, int state)
-{
-	char name_buf[120];
-	char state_buf[120];
-	char *prop_buf;
-	char *envp[3];
-	int env_offset = 0;
-	int length;
-
-	if (sdev->state != state) {
-		sdev->state = state;
-
-		prop_buf = (char *)get_zeroed_page(GFP_KERNEL);
-		if (prop_buf) {
-			length = name_show(sdev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(name_buf, sizeof(name_buf),
-					"SWITCH_NAME=%s", prop_buf);
-				envp[env_offset++] = name_buf;
-			}
-			length = state_show(sdev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(state_buf, sizeof(state_buf),
-					"SWITCH_STATE=%s", prop_buf);
-				envp[env_offset++] = state_buf;
-			}
-			envp[env_offset] = NULL;
-			kobject_uevent_env(&sdev->dev->kobj, KOBJ_CHANGE, envp);
-			free_page((unsigned long)prop_buf);
-		} else {
-			printk(KERN_ERR "out of memory in switch_set_state\n");
-			kobject_uevent(&sdev->dev->kobj, KOBJ_CHANGE);
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(switch_set_state);
-
-static int create_switch_class(void)
-{
-	if (!switch_class) {
-		switch_class = class_create(THIS_MODULE, "switch");
-		if (IS_ERR(switch_class))
-			return PTR_ERR(switch_class);
-		atomic_set(&device_count, 0);
-	}
-
-	return 0;
-}
-
-int switch_dev_register(struct switch_dev *sdev)
-{
-	int ret;
-
-	if (!switch_class) {
-		ret = create_switch_class();
-		if (ret < 0)
-			return ret;
-	}
-
-	sdev->index = atomic_inc_return(&device_count);
-	sdev->dev = device_create(switch_class, NULL,
-		MKDEV(0, sdev->index), NULL, sdev->name);
-	if (IS_ERR(sdev->dev))
-		return PTR_ERR(sdev->dev);
-
-	ret = device_create_file(sdev->dev, &dev_attr_state);
-	if (ret < 0)
-		goto err_create_file_1;
-	ret = device_create_file(sdev->dev, &dev_attr_name);
-	if (ret < 0)
-		goto err_create_file_2;
-
-	dev_set_drvdata(sdev->dev, sdev);
-	sdev->state = 0;
-	return 0;
-
-err_create_file_2:
-	device_remove_file(sdev->dev, &dev_attr_state);
-err_create_file_1:
-	device_destroy(switch_class, MKDEV(0, sdev->index));
-	printk(KERN_ERR "switch: Failed to register driver %s\n", sdev->name);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(switch_dev_register);
-
-void switch_dev_unregister(struct switch_dev *sdev)
-{
-	device_remove_file(sdev->dev, &dev_attr_name);
-	device_remove_file(sdev->dev, &dev_attr_state);
-	device_destroy(switch_class, MKDEV(0, sdev->index));
-	dev_set_drvdata(sdev->dev, NULL);
-}
-EXPORT_SYMBOL_GPL(switch_dev_unregister);
-
-static int __init switch_class_init(void)
-{
-	return create_switch_class();
-}
-
-static void __exit switch_class_exit(void)
-{
-	class_destroy(switch_class);
-}
-
-module_init(switch_class_init);
-module_exit(switch_class_exit);
-
-MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
-MODULE_DESCRIPTION("Switch class driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/android/switch/switch_gpio.c b/drivers/staging/android/switch/switch_gpio.c
deleted file mode 100644
index 38b2c2f6004..00000000000
--- a/drivers/staging/android/switch/switch_gpio.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * switch_gpio.c
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <linux/gpio.h>
-#include "switch.h"
-
-struct gpio_switch_data {
-	struct switch_dev sdev;
-	unsigned gpio;
-	const char *name_on;
-	const char *name_off;
-	const char *state_on;
-	const char *state_off;
-	int irq;
-	struct work_struct work;
-};
-
-static void gpio_switch_work(struct work_struct *work)
-{
-	int state;
-	struct gpio_switch_data	*data =
-		container_of(work, struct gpio_switch_data, work);
-
-	state = gpio_get_value(data->gpio);
-	switch_set_state(&data->sdev, state);
-}
-
-static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
-{
-	struct gpio_switch_data *switch_data =
-	    (struct gpio_switch_data *)dev_id;
-
-	schedule_work(&switch_data->work);
-	return IRQ_HANDLED;
-}
-
-static ssize_t switch_gpio_print_state(struct switch_dev *sdev, char *buf)
-{
-	struct gpio_switch_data	*switch_data =
-		container_of(sdev, struct gpio_switch_data, sdev);
-	const char *state;
-	if (switch_get_state(sdev))
-		state = switch_data->state_on;
-	else
-		state = switch_data->state_off;
-
-	if (state)
-		return sprintf(buf, "%s\n", state);
-	return -1;
-}
-
-static int gpio_switch_probe(struct platform_device *pdev)
-{
-	struct gpio_switch_platform_data *pdata = pdev->dev.platform_data;
-	struct gpio_switch_data *switch_data;
-	int ret = 0;
-
-	if (!pdata)
-		return -EBUSY;
-
-	switch_data = kzalloc(sizeof(struct gpio_switch_data), GFP_KERNEL);
-	if (!switch_data)
-		return -ENOMEM;
-
-	switch_data->sdev.name = pdata->name;
-	switch_data->gpio = pdata->gpio;
-	switch_data->name_on = pdata->name_on;
-	switch_data->name_off = pdata->name_off;
-	switch_data->state_on = pdata->state_on;
-	switch_data->state_off = pdata->state_off;
-	switch_data->sdev.print_state = switch_gpio_print_state;
-
-	ret = switch_dev_register(&switch_data->sdev);
-	if (ret < 0)
-		goto err_switch_dev_register;
-
-	ret = gpio_request(switch_data->gpio, pdev->name);
-	if (ret < 0)
-		goto err_request_gpio;
-
-	ret = gpio_direction_input(switch_data->gpio);
-	if (ret < 0)
-		goto err_set_gpio_input;
-
-	INIT_WORK(&switch_data->work, gpio_switch_work);
-
-	switch_data->irq = gpio_to_irq(switch_data->gpio);
-	if (switch_data->irq < 0) {
-		ret = switch_data->irq;
-		goto err_detect_irq_num_failed;
-	}
-
-	ret = request_irq(switch_data->irq, gpio_irq_handler,
-			  IRQF_TRIGGER_LOW, pdev->name, switch_data);
-	if (ret < 0)
-		goto err_request_irq;
-
-	/* Perform initial detection */
-	gpio_switch_work(&switch_data->work);
-
-	return 0;
-
-err_request_irq:
-err_detect_irq_num_failed:
-err_set_gpio_input:
-	gpio_free(switch_data->gpio);
-err_request_gpio:
-	switch_dev_unregister(&switch_data->sdev);
-err_switch_dev_register:
-	kfree(switch_data);
-
-	return ret;
-}
-
-static int __devexit gpio_switch_remove(struct platform_device *pdev)
-{
-	struct gpio_switch_data *switch_data = platform_get_drvdata(pdev);
-
-	cancel_work_sync(&switch_data->work);
-	gpio_free(switch_data->gpio);
-	switch_dev_unregister(&switch_data->sdev);
-	kfree(switch_data);
-
-	return 0;
-}
-
-static struct platform_driver gpio_switch_driver = {
-	.probe		= gpio_switch_probe,
-	.remove		= __devexit_p(gpio_switch_remove),
-	.driver		= {
-		.name	= "switch-gpio",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init gpio_switch_init(void)
-{
-	return platform_driver_register(&gpio_switch_driver);
-}
-
-static void __exit gpio_switch_exit(void)
-{
-	platform_driver_unregister(&gpio_switch_driver);
-}
-
-module_init(gpio_switch_init);
-module_exit(gpio_switch_exit);
-
-MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
-MODULE_DESCRIPTION("GPIO Switch driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index b98371d93a9..42202cd8315 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -146,6 +146,14 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
 	priv->flags = 0; /* interrupt is enabled to begin with */
 	priv->pdev = pdev;
 
+	if (!uioinfo->irq) {
+		ret = platform_get_irq(pdev, 0);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to get IRQ\n");
+			goto bad0;
+		}
+		uioinfo->irq = ret;
+	}
 	uiomem = &uioinfo->mem[0];
 
 	for (i = 0; i < pdev->num_resources; ++i) {
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 566d9f94f73..9a56e3adf47 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -73,7 +73,7 @@ set_bConfigurationValue(struct device *dev, struct device_attribute *attr,
 	return (value < 0) ? value : count;
 }
 
-static DEVICE_ATTR(bConfigurationValue, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR_IGNORE_LOCKDEP(bConfigurationValue, S_IRUGO | S_IWUSR,
 		show_bConfigurationValue, set_bConfigurationValue);
 
 /* String fields */
@@ -595,7 +595,7 @@ static ssize_t usb_dev_authorized_store(struct device *dev,
 	return result < 0? result : size;
 }
 
-static DEVICE_ATTR(authorized, 0644,
+static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, 0644,
 	    usb_dev_authorized_show, usb_dev_authorized_store);
 
 /* "Safely remove a device" */
@@ -618,7 +618,7 @@ static ssize_t usb_remove_store(struct device *dev,
 	usb_unlock_device(udev);
 	return rc;
 }
-static DEVICE_ATTR(remove, 0200, NULL, usb_remove_store);
+static DEVICE_ATTR_IGNORE_LOCKDEP(remove, 0200, NULL, usb_remove_store);
 
 
 static struct attribute *dev_attrs[] = {
diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c
index 7c8cdb8aed2..8e813eed0f0 100644
--- a/drivers/w1/slaves/w1_ds2408.c
+++ b/drivers/w1/slaves/w1_ds2408.c
@@ -332,7 +332,6 @@ static struct bin_attribute w1_f29_sysfs_bin_files[NB_SYSFS_BIN_FILES] = {
 		},
 		.size = 1,
 		.read = w1_f29_read_cond_search_mask,
-		.write = 0,
 	},
 	{
 		.attr =	{
@@ -341,7 +340,6 @@ static struct bin_attribute w1_f29_sysfs_bin_files[NB_SYSFS_BIN_FILES] = {
 		},
 		.size = 1,
 		.read = w1_f29_read_cond_search_polarity,
-		.write = 0,
 	},
 	{
 		.attr =	{
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 9761950697b..2f2e894ea0c 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -1027,7 +1027,7 @@ static int __init w1_init(void)
 	retval = driver_register(&w1_slave_driver);
 	if (retval) {
 		printk(KERN_ERR
-			"Failed to register master driver. err=%d.\n",
+			"Failed to register slave driver. err=%d.\n",
 			retval);
 		goto err_out_master_unregister;
 	}
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index 3135b2c6399..e10acc23773 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -31,6 +31,9 @@
 static int w1_delay_parm = 1;
 module_param_named(delay_coef, w1_delay_parm, int, 0);
 
+static int w1_disable_irqs = 0;
+module_param_named(disable_irqs, w1_disable_irqs, int, 0);
+
 static u8 w1_crc8_table[] = {
 	0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65,
 	157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220,
@@ -79,6 +82,10 @@ static u8 w1_touch_bit(struct w1_master *dev, int bit)
  */
 static void w1_write_bit(struct w1_master *dev, int bit)
 {
+	unsigned long flags = 0;
+
+	if(w1_disable_irqs) local_irq_save(flags);
+
 	if (bit) {
 		dev->bus_master->write_bit(dev->bus_master->data, 0);
 		w1_delay(6);
@@ -90,6 +97,8 @@ static void w1_write_bit(struct w1_master *dev, int bit)
 		dev->bus_master->write_bit(dev->bus_master->data, 1);
 		w1_delay(10);
 	}
+
+	if(w1_disable_irqs) local_irq_restore(flags);
 }
 
 /**
@@ -158,7 +167,7 @@ EXPORT_SYMBOL_GPL(w1_write_8);
 static u8 w1_read_bit(struct w1_master *dev)
 {
 	int result;
-	unsigned long flags;
+	unsigned long flags = 0;
 
 	/* sample timing is critical here */
 	local_irq_save(flags);
@@ -318,6 +327,9 @@ EXPORT_SYMBOL_GPL(w1_read_block);
 int w1_reset_bus(struct w1_master *dev)
 {
 	int result;
+	unsigned long flags = 0;
+
+	if(w1_disable_irqs) local_irq_save(flags);
 
 	if (dev->bus_master->reset_bus)
 		result = dev->bus_master->reset_bus(dev->bus_master->data) & 0x1;
@@ -330,19 +342,21 @@ int w1_reset_bus(struct w1_master *dev)
 		 * cpu for such a short amount of time AND get it back in
 		 * the maximum amount of time.
 		 */
-		w1_delay(480);
+		w1_delay(500);
 		dev->bus_master->write_bit(dev->bus_master->data, 1);
 		w1_delay(70);
 
 		result = dev->bus_master->read_bit(dev->bus_master->data) & 0x1;
-		/* minmum 70 (above) + 410 = 480 us
+		/* minmum 70 (above) + 430 = 500 us
 		 * There aren't any timing requirements between a reset and
 		 * the following transactions.  Sleeping is safe here.
 		 */
-		/* w1_delay(410); min required time */
+		/* w1_delay(430); min required time */
 		msleep(1);
 	}
 
+	if(w1_disable_irqs) local_irq_restore(flags);
+
 	return result;
 }
 EXPORT_SYMBOL_GPL(w1_reset_bus);