iwlwifi: defer update power mode while scan

Do not set power mode when scanning, and defer that when scan finish.
We still set power mode in force case i.e. when device is overheated.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by:  Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

3 files changed, 64 insertions, 35 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 49d7788937a..b7abd86676f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -263,70 +263,95 @@ static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
 				sizeof(struct iwl_powertable_cmd), cmd);
 }
 
-/* priv->mutex must be held */
-int iwl_power_update_mode(struct iwl_priv *priv, bool force)
+static void iwl_power_build_cmd(struct iwl_priv *priv,
+				struct iwl_powertable_cmd *cmd)
 {
-	int ret = 0;
 	bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS;
-	bool update_chains;
-	struct iwl_powertable_cmd cmd;
 	int dtimper;
 
-	/* Don't update the RX chain when chain noise calibration is running */
-	update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
-			priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
-
 	dtimper = priv->hw->conf.ps_dtim_period ?: 1;
 
 	if (priv->cfg->base_params->broken_powersave)
-		iwl_power_sleep_cam_cmd(priv, &cmd);
+		iwl_power_sleep_cam_cmd(priv, cmd);
 	else if (priv->cfg->base_params->supports_idle &&
 		 priv->hw->conf.flags & IEEE80211_CONF_IDLE)
-		iwl_static_sleep_cmd(priv, &cmd, IWL_POWER_INDEX_5, 20);
+		iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20);
 	else if (priv->cfg->ops->lib->tt_ops.lower_power_detection &&
 		 priv->cfg->ops->lib->tt_ops.tt_power_mode &&
 		 priv->cfg->ops->lib->tt_ops.lower_power_detection(priv)) {
 		/* in thermal throttling low power state */
-		iwl_static_sleep_cmd(priv, &cmd,
+		iwl_static_sleep_cmd(priv, cmd,
 		    priv->cfg->ops->lib->tt_ops.tt_power_mode(priv), dtimper);
 	} else if (!enabled)
-		iwl_power_sleep_cam_cmd(priv, &cmd);
+		iwl_power_sleep_cam_cmd(priv, cmd);
 	else if (priv->power_data.debug_sleep_level_override >= 0)
-		iwl_static_sleep_cmd(priv, &cmd,
+		iwl_static_sleep_cmd(priv, cmd,
 				     priv->power_data.debug_sleep_level_override,
 				     dtimper);
 	else if (no_sleep_autoadjust)
-		iwl_static_sleep_cmd(priv, &cmd, IWL_POWER_INDEX_1, dtimper);
+		iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_1, dtimper);
 	else
-		iwl_power_fill_sleep_cmd(priv, &cmd,
+		iwl_power_fill_sleep_cmd(priv, cmd,
 					 priv->hw->conf.dynamic_ps_timeout,
 					 priv->hw->conf.max_sleep_period);
+}
+
+int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
+		       bool force)
+{
+	int ret;
+	bool update_chains;
+
+	lockdep_assert_held(&priv->mutex);
+
+	/* Don't update the RX chain when chain noise calibration is running */
+	update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
+			priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
+
+	if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
+		return 0;
+
+	if (!iwl_is_ready_rf(priv))
+		return -EIO;
+
+	/* scan complete use sleep_power_next, need to be updated */
+	memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
+	if (test_bit(STATUS_SCANNING, &priv->status) && !force) {
+		IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n");
+		return 0;
+	}
+
+	if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
+		set_bit(STATUS_POWER_PMI, &priv->status);
 
-	if (iwl_is_ready_rf(priv) &&
-	    (memcmp(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd)) || force)) {
-		if (cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
-			set_bit(STATUS_POWER_PMI, &priv->status);
-
-		ret = iwl_set_power(priv, &cmd);
-		if (!ret) {
-			if (!(cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
-				clear_bit(STATUS_POWER_PMI, &priv->status);
-
-			if (priv->cfg->ops->lib->update_chain_flags &&
-			    update_chains)
-				priv->cfg->ops->lib->update_chain_flags(priv);
-			else if (priv->cfg->ops->lib->update_chain_flags)
-				IWL_DEBUG_POWER(priv,
+	ret = iwl_set_power(priv, cmd);
+	if (!ret) {
+		if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
+			clear_bit(STATUS_POWER_PMI, &priv->status);
+
+		if (priv->cfg->ops->lib->update_chain_flags && update_chains)
+			priv->cfg->ops->lib->update_chain_flags(priv);
+		else if (priv->cfg->ops->lib->update_chain_flags)
+			IWL_DEBUG_POWER(priv,
 					"Cannot update the power, chain noise "
 					"calibration running: %d\n",
 					priv->chain_noise_data.state);
-			memcpy(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd));
-		} else
-			IWL_ERR(priv, "set power fail, ret = %d", ret);
-	}
+
+		memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd));
+	} else
+		IWL_ERR(priv, "set power fail, ret = %d", ret);
 
 	return ret;
 }
+EXPORT_SYMBOL(iwl_power_set_mode);
+
+int iwl_power_update_mode(struct iwl_priv *priv, bool force)
+{
+	struct iwl_powertable_cmd cmd;
+
+	iwl_power_build_cmd(priv, &cmd);
+	return iwl_power_set_mode(priv, &cmd, force);
+}
 EXPORT_SYMBOL(iwl_power_update_mode);
 
 /* initialize to default */
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index df81565a7cc..fe012032c28 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -41,10 +41,13 @@ enum iwl_power_level {
 
 struct iwl_power_mgr {
 	struct iwl_powertable_cmd sleep_cmd;
+	struct iwl_powertable_cmd sleep_cmd_next;
 	int debug_sleep_level_override;
 	bool pci_pm;
 };
 
+int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
+		       bool force);
 int iwl_power_update_mode(struct iwl_priv *priv, bool force);
 void iwl_power_initialize(struct iwl_priv *priv);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index d63e30e1106..e1aa0e1daa5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -607,6 +607,7 @@ out_settings:
 	 * We do not commit power settings while scan is pending,
 	 * do it now if the settings changed.
 	 */
+	iwl_power_set_mode(priv, &priv->power_data.sleep_cmd_next, false);
 	iwl_set_tx_power(priv, priv->tx_power_next, false);
 
 	priv->cfg->ops->utils->post_scan(priv);