Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer core updates from Thomas Gleixner:
 "The timer changes contain:

   - posix timer code consolidation and fixes for odd corner cases

   - sched_clock implementation moved from ARM to core code to avoid
     duplication by other architectures

   - alarm timer updates

   - clocksource and clockevents unregistration facilities

   - clocksource/events support for new hardware

   - precise nanoseconds RTC readout (Xen feature)

   - generic support for Xen suspend/resume oddities

   - the usual lot of fixes and cleanups all over the place

  The parts which touch other areas (ARM/XEN) have been coordinated with
  the relevant maintainers.  Though this results in an handful of
  trivial to solve merge conflicts, which we preferred over nasty cross
  tree merge dependencies.

  The patches which have been committed in the last few days are bug
  fixes plus the posix timer lot.  The latter was in akpms queue and
  next for quite some time; they just got forgotten and Frederic
  collected them last minute."

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
  hrtimer: Remove unused variable
  hrtimers: Move SMP function call to thread context
  clocksource: Reselect clocksource when watchdog validated high-res capability
  posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting
  posix_timers: fix racy timer delta caching on task exit
  posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule()
  selftests: add basic posix timers selftests
  posix_cpu_timers: consolidate expired timers check
  posix_cpu_timers: consolidate timer list cleanups
  posix_cpu_timer: consolidate expiry time type
  tick: Sanitize broadcast control logic
  tick: Prevent uncontrolled switch to oneshot mode
  tick: Make oneshot broadcast robust vs. CPU offlining
  x86: xen: Sync the CMOS RTC as well as the Xen wallclock
  x86: xen: Sync the wallclock when the system time is set
  timekeeping: Indicate that clock was set in the pvclock gtod notifier
  timekeeping: Pass flags instead of multiple bools to timekeeping_update()
  xen: Remove clock_was_set() call in the resume path
  hrtimers: Support resuming with two or more CPUs online (but stopped)
  timer: Fix jiffies wrap behavior of round_jiffies_common()
  ...

17 files changed, 497 insertions, 29 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 5871933c4e5..81465c21f87 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -87,3 +87,8 @@ config CLKSRC_SAMSUNG_PWM
 	  Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver
 	  for all devicetree enabled platforms. This driver will be
 	  needed only on systems that do not have the Exynos MCT available.
+
+config VF_PIT_TIMER
+	bool
+	help
+	  Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 8d979c72aa9..9ba8b4d867e 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -22,10 +22,13 @@ obj-$(CONFIG_ARCH_PRIMA2)	+= timer-prima2.o
 obj-$(CONFIG_SUN4I_TIMER)	+= sun4i_timer.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra20_timer.o
 obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o
+obj-$(CONFIG_ARCH_NSPIRE)	+= zevio-timer.o
 obj-$(CONFIG_ARCH_BCM)		+= bcm_kona_timer.o
 obj-$(CONFIG_CADENCE_TTC_TIMER)	+= cadence_ttc_timer.o
 obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
 obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)	+= samsung_pwm_timer.o
+obj-$(CONFIG_VF_PIT_TIMER)	+= vf_pit_timer.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_CLKSRC_METAG_GENERIC)	+= metag_generic.o
+obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST)	+= dummy_timer.o
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index 766611d2994..07ea7ce900d 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -28,8 +28,8 @@
 #include <linux/of_platform.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/sched_clock.h>
 
-#include <asm/sched_clock.h>
 #include <asm/irq.h>
 
 #define REG_CONTROL	0x00
diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c
index 77398f8c19a..a9fd4ad2567 100644
--- a/drivers/clocksource/clksrc-dbx500-prcmu.c
+++ b/drivers/clocksource/clksrc-dbx500-prcmu.c
@@ -14,8 +14,7 @@
  */
 #include <linux/clockchips.h>
 #include <linux/clksrc-dbx500-prcmu.h>
-
-#include <asm/sched_clock.h>
+#include <linux/sched_clock.h>
 
 #define RATE_32K		32768
 
diff --git a/drivers/clocksource/dummy_timer.c b/drivers/clocksource/dummy_timer.c
new file mode 100644
index 00000000000..1f55f962033
--- /dev/null
+++ b/drivers/clocksource/dummy_timer.c
@@ -0,0 +1,69 @@
+/*
+ *  linux/drivers/clocksource/dummy_timer.c
+ *
+ *  Copyright (C) 2013 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+#include <linux/cpumask.h>
+
+static DEFINE_PER_CPU(struct clock_event_device, dummy_timer_evt);
+
+static void dummy_timer_set_mode(enum clock_event_mode mode,
+			   struct clock_event_device *evt)
+{
+	/*
+	 * Core clockevents code will call this when exchanging timer devices.
+	 * We don't need to do anything here.
+	 */
+}
+
+static void __cpuinit dummy_timer_setup(void)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *evt = __this_cpu_ptr(&dummy_timer_evt);
+
+	evt->name	= "dummy_timer";
+	evt->features	= CLOCK_EVT_FEAT_PERIODIC |
+			  CLOCK_EVT_FEAT_ONESHOT |
+			  CLOCK_EVT_FEAT_DUMMY;
+	evt->rating	= 100;
+	evt->set_mode	= dummy_timer_set_mode;
+	evt->cpumask	= cpumask_of(cpu);
+
+	clockevents_register_device(evt);
+}
+
+static int __cpuinit dummy_timer_cpu_notify(struct notifier_block *self,
+				      unsigned long action, void *hcpu)
+{
+	if ((action & ~CPU_TASKS_FROZEN) == CPU_STARTING)
+		dummy_timer_setup();
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block dummy_timer_cpu_nb __cpuinitdata = {
+	.notifier_call = dummy_timer_cpu_notify,
+};
+
+static int __init dummy_timer_register(void)
+{
+	int err = register_cpu_notifier(&dummy_timer_cpu_nb);
+	if (err)
+		return err;
+
+	/* We won't get a call on the boot CPU, so register immediately */
+	if (num_possible_cpus() > 1)
+		dummy_timer_setup();
+
+	return 0;
+}
+early_initcall(dummy_timer_register);
diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c
index 8c2a35f26d9..e54ca1062d8 100644
--- a/drivers/clocksource/dw_apb_timer.c
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -387,15 +387,3 @@ cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs)
 {
 	return (cycle_t)~apbt_readl(&dw_cs->timer, APBTMR_N_CURRENT_VALUE);
 }
-
-/**
- * dw_apb_clocksource_unregister() - unregister and free a clocksource.
- *
- * @dw_cs:	The clocksource to unregister/free.
- */
-void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs)
-{
-	clocksource_unregister(&dw_cs->cs);
-
-	kfree(dw_cs);
-}
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index cef554432a3..4cbae4f762b 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -21,9 +21,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/clk.h>
-
-#include <asm/mach/time.h>
-#include <asm/sched_clock.h>
+#include <linux/sched_clock.h>
 
 static void timer_get_base_and_rate(struct device_node *np,
 				    void __iomem **base, u32 *rate)
@@ -68,7 +66,7 @@ static void add_clockevent(struct device_node *event_timer)
 	u32 irq, rate;
 
 	irq = irq_of_parse_and_map(event_timer, 0);
-	if (irq == NO_IRQ)
+	if (irq == 0)
 		panic("No IRQ for clock event timer");
 
 	timer_get_base_and_rate(event_timer, &iobase, &rate);
diff --git a/drivers/clocksource/mxs_timer.c b/drivers/clocksource/mxs_timer.c
index 02af4204af8..0f5e65f74dc 100644
--- a/drivers/clocksource/mxs_timer.c
+++ b/drivers/clocksource/mxs_timer.c
@@ -29,9 +29,9 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/stmp_device.h>
+#include <linux/sched_clock.h>
 
 #include <asm/mach/time.h>
-#include <asm/sched_clock.h>
 
 /*
  * There are 2 versions of the timrot on Freescale MXS-based SoCs.
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index b9415b622f5..7d2c2c56f73 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -21,8 +21,8 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/platform_data/clocksource-nomadik-mtu.h>
+#include <linux/sched_clock.h>
 #include <asm/mach/time.h>
-#include <asm/sched_clock.h>
 
 /*
  * The MTU device hosts four different counters, with 4 set of
diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c
index 0234c8d2c8f..584b5472eea 100644
--- a/drivers/clocksource/samsung_pwm_timer.c
+++ b/drivers/clocksource/samsung_pwm_timer.c
@@ -21,10 +21,10 @@
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/sched_clock.h>
 
 #include <clocksource/samsung_pwm.h>
 
-#include <asm/sched_clock.h>
 
 /*
  * Clocksource driver
diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c
index ae877b021b5..93961703b88 100644
--- a/drivers/clocksource/tegra20_timer.c
+++ b/drivers/clocksource/tegra20_timer.c
@@ -26,10 +26,10 @@
 #include <linux/io.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/sched_clock.h>
 
 #include <asm/mach/time.h>
 #include <asm/smp_twd.h>
-#include <asm/sched_clock.h>
 
 #define RTC_SECONDS            0x08
 #define RTC_SHADOW_SECONDS     0x0c
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index 47a673070d7..efdca3263af 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -27,8 +27,8 @@
 #include <linux/of_address.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/sched_clock.h>
 
-#include <asm/sched_clock.h>
 #include <asm/localtimer.h>
 #include <linux/percpu.h>
 /*
diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c
index 97738dbf3e3..e5dc9129ca2 100644
--- a/drivers/clocksource/timer-marco.c
+++ b/drivers/clocksource/timer-marco.c
@@ -17,7 +17,7 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
-#include <asm/sched_clock.h>
+#include <linux/sched_clock.h>
 #include <asm/localtimer.h>
 #include <asm/mach/time.h>
 
diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index 760882665d7..ef3cfb269d8 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -18,7 +18,7 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
-#include <asm/sched_clock.h>
+#include <linux/sched_clock.h>
 #include <asm/mach/time.h>
 
 #define SIRFSOC_TIMER_COUNTER_LO	0x0000
diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/vf_pit_timer.c
new file mode 100644
index 00000000000..587e0202a70
--- /dev/null
+++ b/drivers/clocksource/vf_pit_timer.c
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+/*
+ * Each pit takes 0x10 Bytes register space
+ */
+#define PITMCR		0x00
+#define PIT0_OFFSET	0x100
+#define PITn_OFFSET(n)	(PIT0_OFFSET + 0x10 * (n))
+#define PITLDVAL	0x00
+#define PITCVAL		0x04
+#define PITTCTRL	0x08
+#define PITTFLG		0x0c
+
+#define PITMCR_MDIS	(0x1 << 1)
+
+#define PITTCTRL_TEN	(0x1 << 0)
+#define PITTCTRL_TIE	(0x1 << 1)
+#define PITCTRL_CHN	(0x1 << 2)
+
+#define PITTFLG_TIF	0x1
+
+static void __iomem *clksrc_base;
+static void __iomem *clkevt_base;
+static unsigned long cycle_per_jiffy;
+
+static inline void pit_timer_enable(void)
+{
+	__raw_writel(PITTCTRL_TEN | PITTCTRL_TIE, clkevt_base + PITTCTRL);
+}
+
+static inline void pit_timer_disable(void)
+{
+	__raw_writel(0, clkevt_base + PITTCTRL);
+}
+
+static inline void pit_irq_acknowledge(void)
+{
+	__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
+}
+
+static unsigned int pit_read_sched_clock(void)
+{
+	return __raw_readl(clksrc_base + PITCVAL);
+}
+
+static int __init pit_clocksource_init(unsigned long rate)
+{
+	/* set the max load value and start the clock source counter */
+	__raw_writel(0, clksrc_base + PITTCTRL);
+	__raw_writel(~0UL, clksrc_base + PITLDVAL);
+	__raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL);
+
+	setup_sched_clock(pit_read_sched_clock, 32, rate);
+	return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate,
+			300, 32, clocksource_mmio_readl_down);
+}
+
+static int pit_set_next_event(unsigned long delta,
+				struct clock_event_device *unused)
+{
+	/*
+	 * set a new value to PITLDVAL register will not restart the timer,
+	 * to abort the current cycle and start a timer period with the new
+	 * value, the timer must be disabled and enabled again.
+	 * and the PITLAVAL should be set to delta minus one according to pit
+	 * hardware requirement.
+	 */
+	pit_timer_disable();
+	__raw_writel(delta - 1, clkevt_base + PITLDVAL);
+	pit_timer_enable();
+
+	return 0;
+}
+
+static void pit_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		pit_set_next_event(cycle_per_jiffy, evt);
+		break;
+	default:
+		break;
+	}
+}
+
+static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	pit_irq_acknowledge();
+
+	/*
+	 * pit hardware doesn't support oneshot, it will generate an interrupt
+	 * and reload the counter value from PITLDVAL when PITCVAL reach zero,
+	 * and start the counter again. So software need to disable the timer
+	 * to stop the counter loop in ONESHOT mode.
+	 */
+	if (likely(evt->mode == CLOCK_EVT_MODE_ONESHOT))
+		pit_timer_disable();
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct clock_event_device clockevent_pit = {
+	.name		= "VF pit timer",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= pit_set_mode,
+	.set_next_event	= pit_set_next_event,
+	.rating		= 300,
+};
+
+static struct irqaction pit_timer_irq = {
+	.name		= "VF pit timer",
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= pit_timer_interrupt,
+	.dev_id		= &clockevent_pit,
+};
+
+static int __init pit_clockevent_init(unsigned long rate, int irq)
+{
+	__raw_writel(0, clkevt_base + PITTCTRL);
+	__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
+
+	BUG_ON(setup_irq(irq, &pit_timer_irq));
+
+	clockevent_pit.cpumask = cpumask_of(0);
+	clockevent_pit.irq = irq;
+	/*
+	 * The value for the LDVAL register trigger is calculated as:
+	 * LDVAL trigger = (period / clock period) - 1
+	 * The pit is a 32-bit down count timer, when the conter value
+	 * reaches 0, it will generate an interrupt, thus the minimal
+	 * LDVAL trigger value is 1. And then the min_delta is
+	 * minimal LDVAL trigger value + 1, and the max_delta is full 32-bit.
+	 */
+	clockevents_config_and_register(&clockevent_pit, rate, 2, 0xffffffff);
+
+	return 0;
+}
+
+static void __init pit_timer_init(struct device_node *np)
+{
+	struct clk *pit_clk;
+	void __iomem *timer_base;
+	unsigned long clk_rate;
+	int irq;
+
+	timer_base = of_iomap(np, 0);
+	BUG_ON(!timer_base);
+
+	/*
+	 * PIT0 and PIT1 can be chained to build a 64-bit timer,
+	 * so choose PIT2 as clocksource, PIT3 as clockevent device,
+	 * and leave PIT0 and PIT1 unused for anyone else who needs them.
+	 */
+	clksrc_base = timer_base + PITn_OFFSET(2);
+	clkevt_base = timer_base + PITn_OFFSET(3);
+
+	irq = irq_of_parse_and_map(np, 0);
+	BUG_ON(irq <= 0);
+
+	pit_clk = of_clk_get(np, 0);
+	BUG_ON(IS_ERR(pit_clk));
+
+	BUG_ON(clk_prepare_enable(pit_clk));
+
+	clk_rate = clk_get_rate(pit_clk);
+	cycle_per_jiffy = clk_rate / (HZ);
+
+	/* enable the pit module */
+	__raw_writel(~PITMCR_MDIS, timer_base + PITMCR);
+
+	BUG_ON(pit_clocksource_init(clk_rate));
+
+	pit_clockevent_init(clk_rate, irq);
+}
+CLOCKSOURCE_OF_DECLARE(vf610, "fsl,vf610-pit", pit_timer_init);
diff --git a/drivers/clocksource/zevio-timer.c b/drivers/clocksource/zevio-timer.c
new file mode 100644
index 00000000000..ca81809d159
--- /dev/null
+++ b/drivers/clocksource/zevio-timer.c
@@ -0,0 +1,215 @@
+/*
+ *  linux/drivers/clocksource/zevio-timer.c
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+#define IO_CURRENT_VAL	0x00
+#define IO_DIVIDER	0x04
+#define IO_CONTROL	0x08
+
+#define IO_TIMER1	0x00
+#define IO_TIMER2	0x0C
+
+#define IO_MATCH_BEGIN	0x18
+#define IO_MATCH(x)	(IO_MATCH_BEGIN + ((x) << 2))
+
+#define IO_INTR_STS	0x00
+#define IO_INTR_ACK	0x00
+#define IO_INTR_MSK	0x04
+
+#define CNTL_STOP_TIMER	(1 << 4)
+#define CNTL_RUN_TIMER	(0 << 4)
+
+#define CNTL_INC	(1 << 3)
+#define CNTL_DEC	(0 << 3)
+
+#define CNTL_TOZERO	0
+#define CNTL_MATCH(x)	((x) + 1)
+#define CNTL_FOREVER	7
+
+/* There are 6 match registers but we only use one. */
+#define TIMER_MATCH	0
+
+#define TIMER_INTR_MSK	(1 << (TIMER_MATCH))
+#define TIMER_INTR_ALL	0x3F
+
+struct zevio_timer {
+	void __iomem *base;
+	void __iomem *timer1, *timer2;
+	void __iomem *interrupt_regs;
+
+	struct clk *clk;
+	struct clock_event_device clkevt;
+	struct irqaction clkevt_irq;
+
+	char clocksource_name[64];
+	char clockevent_name[64];
+};
+
+static int zevio_timer_set_event(unsigned long delta,
+				 struct clock_event_device *dev)
+{
+	struct zevio_timer *timer = container_of(dev, struct zevio_timer,
+						 clkevt);
+
+	writel(delta, timer->timer1 + IO_CURRENT_VAL);
+	writel(CNTL_RUN_TIMER | CNTL_DEC | CNTL_MATCH(TIMER_MATCH),
+			timer->timer1 + IO_CONTROL);
+
+	return 0;
+}
+
+static void zevio_timer_set_mode(enum clock_event_mode mode,
+				 struct clock_event_device *dev)
+{
+	struct zevio_timer *timer = container_of(dev, struct zevio_timer,
+						 clkevt);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_RESUME:
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* Enable timer interrupts */
+		writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_MSK);
+		writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		/* Disable timer interrupts */
+		writel(0, timer->interrupt_regs + IO_INTR_MSK);
+		writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
+		/* Stop timer */
+		writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
+		break;
+	case CLOCK_EVT_MODE_PERIODIC:
+	default:
+		/* Unsupported */
+		break;
+	}
+}
+
+static irqreturn_t zevio_timer_interrupt(int irq, void *dev_id)
+{
+	struct zevio_timer *timer = dev_id;
+	u32 intr;
+
+	intr = readl(timer->interrupt_regs + IO_INTR_ACK);
+	if (!(intr & TIMER_INTR_MSK))
+		return IRQ_NONE;
+
+	writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_ACK);
+	writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
+
+	if (timer->clkevt.event_handler)
+		timer->clkevt.event_handler(&timer->clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init zevio_timer_add(struct device_node *node)
+{
+	struct zevio_timer *timer;
+	struct resource res;
+	int irqnr, ret;
+
+	timer = kzalloc(sizeof(*timer), GFP_KERNEL);
+	if (!timer)
+		return -ENOMEM;
+
+	timer->base = of_iomap(node, 0);
+	if (!timer->base) {
+		ret = -EINVAL;
+		goto error_free;
+	}
+	timer->timer1 = timer->base + IO_TIMER1;
+	timer->timer2 = timer->base + IO_TIMER2;
+
+	timer->clk = of_clk_get(node, 0);
+	if (IS_ERR(timer->clk)) {
+		ret = PTR_ERR(timer->clk);
+		pr_err("Timer clock not found! (error %d)\n", ret);
+		goto error_unmap;
+	}
+
+	timer->interrupt_regs = of_iomap(node, 1);
+	irqnr = irq_of_parse_and_map(node, 0);
+
+	of_address_to_resource(node, 0, &res);
+	scnprintf(timer->clocksource_name, sizeof(timer->clocksource_name),
+			"%llx.%s_clocksource",
+			(unsigned long long)res.start, node->name);
+
+	scnprintf(timer->clockevent_name, sizeof(timer->clockevent_name),
+			"%llx.%s_clockevent",
+			(unsigned long long)res.start, node->name);
+
+	if (timer->interrupt_regs && irqnr) {
+		timer->clkevt.name		= timer->clockevent_name;
+		timer->clkevt.set_next_event	= zevio_timer_set_event;
+		timer->clkevt.set_mode		= zevio_timer_set_mode;
+		timer->clkevt.rating		= 200;
+		timer->clkevt.cpumask		= cpu_all_mask;
+		timer->clkevt.features		= CLOCK_EVT_FEAT_ONESHOT;
+		timer->clkevt.irq		= irqnr;
+
+		writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
+		writel(0, timer->timer1 + IO_DIVIDER);
+
+		/* Start with timer interrupts disabled */
+		writel(0, timer->interrupt_regs + IO_INTR_MSK);
+		writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
+
+		/* Interrupt to occur when timer value matches 0 */
+		writel(0, timer->base + IO_MATCH(TIMER_MATCH));
+
+		timer->clkevt_irq.name		= timer->clockevent_name;
+		timer->clkevt_irq.handler	= zevio_timer_interrupt;
+		timer->clkevt_irq.dev_id	= timer;
+		timer->clkevt_irq.flags		= IRQF_TIMER | IRQF_IRQPOLL;
+
+		setup_irq(irqnr, &timer->clkevt_irq);
+
+		clockevents_config_and_register(&timer->clkevt,
+				clk_get_rate(timer->clk), 0x0001, 0xffff);
+		pr_info("Added %s as clockevent\n", timer->clockevent_name);
+	}
+
+	writel(CNTL_STOP_TIMER, timer->timer2 + IO_CONTROL);
+	writel(0, timer->timer2 + IO_CURRENT_VAL);
+	writel(0, timer->timer2 + IO_DIVIDER);
+	writel(CNTL_RUN_TIMER | CNTL_FOREVER | CNTL_INC,
+			timer->timer2 + IO_CONTROL);
+
+	clocksource_mmio_init(timer->timer2 + IO_CURRENT_VAL,
+			timer->clocksource_name,
+			clk_get_rate(timer->clk),
+			200, 16,
+			clocksource_mmio_readw_up);
+
+	pr_info("Added %s as clocksource\n", timer->clocksource_name);
+
+	return 0;
+error_unmap:
+	iounmap(timer->base);
+error_free:
+	kfree(timer);
+	return ret;
+}
+
+CLOCKSOURCE_OF_DECLARE(zevio_timer, "lsi,zevio-timer", zevio_timer_add);
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index 9385b452454..624e8dc2453 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -168,9 +168,6 @@ out_resume:
 
 	dpm_resume_end(si.cancelled ? PMSG_THAW : PMSG_RESTORE);
 
-	/* Make sure timer events get retriggered on all CPUs */
-	clock_was_set();
-
 out_thaw:
 #ifdef CONFIG_PREEMPT
 	thaw_processes();