Merge tag 'mmc-fixes-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC fixes from Chris Ball:

 - omap_hsmmc: Using AUTO_CMD12 (enabled by default in 3.5-rc1) has
   been found to cause data corruption on the BeagleBoard, but no
   other OMAP boards so far.  Revert the patch until there's a root
   cause explanation that makes sense, at which point we might
   decide to use a blacklist or whitelist.

 - mmc_block: Fix incorrect data timeouts for the case of multiblock
   (ACMD22) writes for block-addressed cards.

* tag 'mmc-fixes-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  Revert "mmc: omap_hsmmc: Enable Auto CMD12"
  mmc: block: fix the data timeout issue with ACMD22

2 files changed, 4 insertions, 25 deletions

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index dd2d374dcc7..276d21ce6bc 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -554,7 +554,6 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 	struct mmc_request mrq = {NULL};
 	struct mmc_command cmd = {0};
 	struct mmc_data data = {0};
-	unsigned int timeout_us;
 
 	struct scatterlist sg;
 
@@ -574,23 +573,12 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 	cmd.arg = 0;
 	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
 
-	data.timeout_ns = card->csd.tacc_ns * 100;
-	data.timeout_clks = card->csd.tacc_clks * 100;
-
-	timeout_us = data.timeout_ns / 1000;
-	timeout_us += data.timeout_clks * 1000 /
-		(card->host->ios.clock / 1000);
-
-	if (timeout_us > 100000) {
-		data.timeout_ns = 100000000;
-		data.timeout_clks = 0;
-	}
-
 	data.blksz = 4;
 	data.blocks = 1;
 	data.flags = MMC_DATA_READ;
 	data.sg = &sg;
 	data.sg_len = 1;
+	mmc_set_data_timeout(&data, card);
 
 	mrq.cmd = &cmd;
 	mrq.data = &data;
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 9a7a60aeb19..389a3eedfc2 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -85,7 +85,6 @@
 #define BRR_ENABLE		(1 << 5)
 #define DTO_ENABLE		(1 << 20)
 #define INIT_STREAM		(1 << 1)
-#define ACEN_ACMD12		(1 << 2)
 #define DP_SELECT		(1 << 21)
 #define DDIR			(1 << 4)
 #define DMA_EN			0x1
@@ -117,7 +116,6 @@
 #define OMAP_MMC_MAX_CLOCK	52000000
 #define DRIVER_NAME		"omap_hsmmc"
 
-#define AUTO_CMD12		(1 << 0)	/* Auto CMD12 support */
 /*
  * One controller can have multiple slots, like on some omap boards using
  * omap.c controller driver. Luckily this is not currently done on any known
@@ -177,7 +175,6 @@ struct omap_hsmmc_host {
 	int			reqs_blocked;
 	int			use_reg;
 	int			req_in_progress;
-	unsigned int		flags;
 	struct omap_hsmmc_next	next_data;
 
 	struct	omap_mmc_platform_data	*pdata;
@@ -773,8 +770,6 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
 		cmdtype = 0x3;
 
 	cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
-	if ((host->flags & AUTO_CMD12) && mmc_op_multi(cmd->opcode))
-		cmdreg |= ACEN_ACMD12;
 
 	if (data) {
 		cmdreg |= DP_SELECT | MSBS | BCE;
@@ -847,14 +842,11 @@ omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data)
 	else
 		data->bytes_xfered = 0;
 
-	if (data->stop && ((!(host->flags & AUTO_CMD12)) || data->error)) {
-		omap_hsmmc_start_command(host, data->stop, NULL);
-	} else {
-		if (data->stop)
-			data->stop->resp[0] = OMAP_HSMMC_READ(host->base,
-							RSP76);
+	if (!data->stop) {
 		omap_hsmmc_request_done(host, data->mrq);
+		return;
 	}
+	omap_hsmmc_start_command(host, data->stop, NULL);
 }
 
 /*
@@ -1859,7 +1851,6 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
 	host->mapbase	= res->start + pdata->reg_offset;
 	host->base	= ioremap(host->mapbase, SZ_4K);
 	host->power_mode = MMC_POWER_OFF;
-	host->flags	= AUTO_CMD12;
 	host->next_data.cookie = 1;
 
 	platform_set_drvdata(pdev, host);