Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

150 files changed, 1162 insertions, 1362 deletions

diff --git a/drivers/Kconfig b/drivers/Kconfig
index d38f43f593d..2f557f570ad 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -68,6 +68,8 @@ source "drivers/ssb/Kconfig"
 
 source "drivers/mfd/Kconfig"
 
+source "drivers/regulator/Kconfig"
+
 source "drivers/media/Kconfig"
 
 source "drivers/video/Kconfig"
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index aeadd00411a..a67b8e7c712 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -49,6 +49,17 @@
 #define DRV_NAME	"ahci"
 #define DRV_VERSION	"3.0"
 
+/* Enclosure Management Control */
+#define EM_CTRL_MSG_TYPE              0x000f0000
+
+/* Enclosure Management LED Message Type */
+#define EM_MSG_LED_HBA_PORT           0x0000000f
+#define EM_MSG_LED_PMP_SLOT           0x0000ff00
+#define EM_MSG_LED_VALUE              0xffff0000
+#define EM_MSG_LED_VALUE_ACTIVITY     0x00070000
+#define EM_MSG_LED_VALUE_OFF          0xfff80000
+#define EM_MSG_LED_VALUE_ON           0x00010000
+
 static int ahci_skip_host_reset;
 module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
 MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
@@ -588,6 +599,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },	/* 6145 */
 	{ PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv },	/* 6121 */
 
+	/* Promise */
+	{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },	/* PDC42819 */
+
 	/* Generic, PCI class code for AHCI */
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
@@ -1220,18 +1234,20 @@ static void ahci_sw_activity_blink(unsigned long arg)
 	struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
 	unsigned long led_message = emp->led_state;
 	u32 activity_led_state;
+	unsigned long flags;
 
-	led_message &= 0xffff0000;
+	led_message &= EM_MSG_LED_VALUE;
 	led_message |= ap->port_no | (link->pmp << 8);
 
 	/* check to see if we've had activity.  If so,
 	 * toggle state of LED and reset timer.  If not,
 	 * turn LED to desired idle state.
 	 */
+	spin_lock_irqsave(ap->lock, flags);
 	if (emp->saved_activity != emp->activity) {
 		emp->saved_activity = emp->activity;
 		/* get the current LED state */
-		activity_led_state = led_message & 0x00010000;
+		activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
 
 		if (activity_led_state)
 			activity_led_state = 0;
@@ -1239,17 +1255,18 @@ static void ahci_sw_activity_blink(unsigned long arg)
 			activity_led_state = 1;
 
 		/* clear old state */
-		led_message &= 0xfff8ffff;
+		led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
 
 		/* toggle state */
 		led_message |= (activity_led_state << 16);
 		mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
 	} else {
 		/* switch to idle */
-		led_message &= 0xfff8ffff;
+		led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
 		if (emp->blink_policy == BLINK_OFF)
 			led_message |= (1 << 16);
 	}
+	spin_unlock_irqrestore(ap->lock, flags);
 	ahci_transmit_led_message(ap, led_message, 4);
 }
 
@@ -1294,7 +1311,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 	struct ahci_em_priv *emp;
 
 	/* get the slot number from the message */
-	pmp = (state & 0x0000ff00) >> 8;
+	pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
 	if (pmp < MAX_SLOTS)
 		emp = &pp->em_priv[pmp];
 	else
@@ -1319,7 +1336,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 	message[0] |= (4 << 8);
 
 	/* ignore 0:4 of byte zero, fill in port info yourself */
-	message[1] = ((state & 0xfffffff0) | ap->port_no);
+	message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
 
 	/* write message to EM_LOC */
 	writel(message[0], mmio + hpriv->em_loc);
@@ -1362,7 +1379,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
 	state = simple_strtoul(buf, NULL, 0);
 
 	/* get the slot number from the message */
-	pmp = (state & 0x0000ff00) >> 8;
+	pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
 	if (pmp < MAX_SLOTS)
 		emp = &pp->em_priv[pmp];
 	else
@@ -1373,7 +1390,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
 	 * activity led through em_message
 	 */
 	if (emp->blink_policy)
-		state &= 0xfff8ffff;
+		state &= ~EM_MSG_LED_VALUE_ACTIVITY;
 
 	return ahci_transmit_led_message(ap, state, size);
 }
@@ -1392,16 +1409,16 @@ static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
 		link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
 
 		/* set the LED to OFF */
-		port_led_state &= 0xfff80000;
+		port_led_state &= EM_MSG_LED_VALUE_OFF;
 		port_led_state |= (ap->port_no | (link->pmp << 8));
 		ahci_transmit_led_message(ap, port_led_state, 4);
 	} else {
 		link->flags |= ATA_LFLAG_SW_ACTIVITY;
 		if (val == BLINK_OFF) {
 			/* set LED to ON for idle */
-			port_led_state &= 0xfff80000;
+			port_led_state &= EM_MSG_LED_VALUE_OFF;
 			port_led_state |= (ap->port_no | (link->pmp << 8));
-			port_led_state |= 0x00010000; /* check this */
+			port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
 			ahci_transmit_led_message(ap, port_led_state, 4);
 		}
 	}
@@ -2612,7 +2629,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		u32 em_loc = readl(mmio + HOST_EM_LOC);
 		u32 em_ctl = readl(mmio + HOST_EM_CTL);
 
-		messages = (em_ctl & 0x000f0000) >> 16;
+		messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
 
 		/* we only support LED message type right now */
 		if ((messages & 0x01) && (ahci_em_messages == 1)) {
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 75a406f5e69..5c33767e66d 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -1,6 +1,6 @@
 /*
  *  ata_generic.c - Generic PATA/SATA controller driver.
- *  Copyright 2005 Red Hat Inc <alan@redhat.com>, all rights reserved.
+ *  Copyright 2005 Red Hat Inc, all rights reserved.
  *
  *  Elements from ide/pci/generic.c
  *	    Copyright (C) 2001-2002	Andre Hedrick <andre@linux-ide.org>
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index e9e32ed6b1a..52dc2d8b8f2 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -14,7 +14,7 @@
  *
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- *  Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
+ *  Copyright (C) 2003 Red Hat Inc
  *
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8cb0b360bfd..2ff633c119e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4156,29 +4156,33 @@ static int cable_is_40wire(struct ata_port *ap)
 	struct ata_link *link;
 	struct ata_device *dev;
 
-	/* If the controller thinks we are 40 wire, we are */
+	/* If the controller thinks we are 40 wire, we are. */
 	if (ap->cbl == ATA_CBL_PATA40)
 		return 1;
-	/* If the controller thinks we are 80 wire, we are */
+
+	/* If the controller thinks we are 80 wire, we are. */
 	if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
 		return 0;
-	/* If the system is known to be 40 wire short cable (eg laptop),
-	   then we allow 80 wire modes even if the drive isn't sure */
+
+	/* If the system is known to be 40 wire short cable (eg
+	 * laptop), then we allow 80 wire modes even if the drive
+	 * isn't sure.
+	 */
 	if (ap->cbl == ATA_CBL_PATA40_SHORT)
 		return 0;
-	/* If the controller doesn't know we scan
-
-	   - Note: We look for all 40 wire detects at this point.
-	     Any 80 wire detect is taken to be 80 wire cable
-	     because
-	     - In many setups only the one drive (slave if present)
-               will give a valid detect
-             - If you have a non detect capable drive you don't
-               want it to colour the choice
-        */
+
+	/* If the controller doesn't know, we scan.
+	 *
+	 * Note: We look for all 40 wire detects at this point.  Any
+	 *       80 wire detect is taken to be 80 wire cable because
+	 * - in many setups only the one drive (slave if present) will
+	 *   give a valid detect
+	 * - if you have a non detect capable drive you don't want it
+	 *   to colour the choice
+	 */
 	ata_port_for_each_link(link, ap) {
 		ata_link_for_each_dev(dev, link) {
-			if (!ata_is_40wire(dev))
+			if (ata_dev_enabled(dev) && !ata_is_40wire(dev))
 				return 0;
 		}
 	}
@@ -4553,6 +4557,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
 /**
  *	ata_qc_new_init - Request an available ATA command, and initialize it
  *	@dev: Device from whom we request an available command structure
+ *	@tag: command tag
  *
  *	LOCKING:
  *	None.
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 5d687d7cffa..8077bdf5d30 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -603,6 +603,9 @@ void ata_scsi_error(struct Scsi_Host *host)
 			ata_link_for_each_dev(dev, link) {
 				int devno = dev->devno;
 
+				if (!ata_dev_enabled(dev))
+					continue;
+
 				ehc->saved_xfer_mode[devno] = dev->xfer_mode;
 				if (ata_ncq_enabled(dev))
 					ehc->saved_ncq_enabled |= 1 << devno;
@@ -1161,6 +1164,7 @@ void ata_eh_detach_dev(struct ata_device *dev)
 {
 	struct ata_link *link = dev->link;
 	struct ata_port *ap = link->ap;
+	struct ata_eh_context *ehc = &link->eh_context;
 	unsigned long flags;
 
 	ata_dev_disable(dev);
@@ -1174,9 +1178,11 @@ void ata_eh_detach_dev(struct ata_device *dev)
 		ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
 	}
 
-	/* clear per-dev EH actions */
+	/* clear per-dev EH info */
 	ata_eh_clear_action(link, dev, &link->eh_info, ATA_EH_PERDEV_MASK);
 	ata_eh_clear_action(link, dev, &link->eh_context.i, ATA_EH_PERDEV_MASK);
+	ehc->saved_xfer_mode[dev->devno] = 0;
+	ehc->saved_ncq_enabled &= ~(1 << dev->devno);
 
 	spin_unlock_irqrestore(ap->lock, flags);
 }
@@ -2787,6 +2793,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 
 	/* if data transfer is verified, clear DUBIOUS_XFER on ering top */
 	ata_link_for_each_dev(dev, link) {
+		if (!ata_dev_enabled(dev))
+			continue;
+
 		if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) {
 			struct ata_ering_entry *ent;
 
@@ -2808,6 +2817,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 		u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno];
 		u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno));
 
+		if (!ata_dev_enabled(dev))
+			continue;
+
 		if (dev->xfer_mode != saved_xfer_mode ||
 		    ata_ncq_enabled(dev) != saved_ncq)
 			dev->flags |= ATA_DFLAG_DUBIOUS_XFER;
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index eb919c16a03..e2e332d8ff9 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -1,7 +1,7 @@
 /*
  *	ACPI PATA driver
  *
- *	(c) 2007 Red Hat  <alan@redhat.com>
+ *	(c) 2007 Red Hat
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 5ca70fa1f58..73c466e452c 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -1,7 +1,6 @@
 /*
  * pata_ali.c 	- ALI 15x3 PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * based in part upon
  * linux/drivers/ide/pci/alim15x3.c		Version 0.17	2003/01/02
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 57dd00f463d..0ec9c7d9fe9 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -1,7 +1,6 @@
 /*
  * pata_amd.c 	- AMD PATA for new ATA layer
  *			  (C) 2005-2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  *  Based on pata-sil680. Errata information is taken from data sheets
  *  and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 0f513bc1119..6b3092c75ff 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -1,7 +1,7 @@
 /*
  *    pata_artop.c - ARTOP ATA controller driver
  *
- *	(C) 2006 Red Hat <alan@redhat.com>
+ *	(C) 2006 Red Hat
  *	(C) 2007 Bartlomiej Zolnierkiewicz
  *
  *    Based in part on drivers/ide/pci/aec62xx.c
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index e8a0d99d735..0e2cde8f997 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -1,7 +1,6 @@
 /*
  * pata_atiixp.c 	- ATI PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * Based on
  *
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 2de30b99027..34a394264c3 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -1,7 +1,6 @@
 /*
  * pata_cmd640.c 	- CMD640 PCI PATA for new ATA layer
  *			  (C) 2007 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * Based upon
  *  linux/drivers/ide/pci/cmd640.c		Version 1.02  Sep 01, 1996
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index ddd09b7d98c..3167d8fed2f 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -1,7 +1,7 @@
 /*
  * pata_cmd64x.c 	- CMD64x PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * Based upon
  * linux/drivers/ide/pci/cmd64x.c		Version 1.30	Sept 10, 2002
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 0c4b271a9d5..bba453381f4 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -1,7 +1,6 @@
 /*
  * pata-cs5530.c 	- CS5530 PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * based upon cs5530.c by Mark Lord.
  *
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index f1b6556f048..1b2d4a0f5f7 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -1,7 +1,7 @@
 /*
  * pata-cs5535.c 	- CS5535 PATA for new ATA layer
  *			  (C) 2005-2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and
  * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 2ff62608ae3..d546425cd38 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -1,7 +1,7 @@
 /*
  * pata_cypress.c 	- Cypress PATA for new ATA layer
  *			  (C) 2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox
  *
  * Based heavily on
  * linux/drivers/ide/pci/cy82c693.c		Version 0.40	Sep. 10, 2002
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 9fba82976ba..ac6392ea35b 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -1,7 +1,7 @@
 /*
  *    pata_efar.c - EFAR PIIX clone controller driver
  *
- *	(C) 2005 Red Hat <alan@redhat.com>
+ *	(C) 2005 Red Hat
  *
  *    Some parts based on ata_piix.c by Jeff Garzik and others.
  *
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 6a111baab52..15cdb9148aa 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -1,7 +1,7 @@
 
 /*
  *   pata-isapnp.c - ISA PnP PATA controller driver.
- *   Copyright 2005/2006 Red Hat Inc <alan@redhat.com>, all rights reserved.
+ *   Copyright 2005/2006 Red Hat Inc, all rights reserved.
  *
  *   Based in part on ide-pnp.c by Andrey Panin <pazke@donpac.ru>
  */
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 0221c9a4676..860ede52628 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -1,7 +1,7 @@
 /*
  * pata_it821x.c 	- IT821x PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
  *			  (C) 2007 Bartlomiej Zolnierkiewicz
  *
  * based upon
@@ -10,7 +10,7 @@
  *
  * linux/drivers/ide/pci/it821x.c		Version 0.09	December 2004
  *
- * Copyright (C) 2004		Red Hat <alan@redhat.com>
+ * Copyright (C) 2004		Red Hat
  *
  *  May be copied or modified under the terms of the GNU General Public License
  *  Based in part on the ITE vendor provided SCSI driver.
@@ -557,9 +557,8 @@ static unsigned int it821x_read_id(struct ata_device *adev,
 	if (strstr(model_num, "Integrated Technology Express")) {
 		/* Set feature bits the firmware neglects */
 		id[49] |= 0x0300;	/* LBA, DMA */
-		id[82] |= 0x0400;	/* LBA48 */
 		id[83] &= 0x7FFF;
-		id[83] |= 0x4000;	/* Word 83 is valid */
+		id[83] |= 0x4400;	/* Word 83 is valid and LBA48 */
 		id[86] |= 0x0400;	/* LBA48 on */
 		id[ATA_ID_MAJOR_VER] |= 0x1F;
 	}
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 73b7596816b..38cf1ab2d28 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -4,7 +4,7 @@
  *			driven by AHCI in the usual configuration although
  *			this driver can handle other setups if we need it.
  *
- *	(c) 2006 Red Hat  <alan@redhat.com>
+ *	(c) 2006 Red Hat
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index bc037ffce20..930c2208640 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -1,6 +1,6 @@
 /*
  *   pata-legacy.c - Legacy port PATA/SATA controller driver.
- *   Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved.
+ *   Copyright 2005/2006 Red Hat, all rights reserved.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 0d87eec8496..76e399bf8c1 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -5,7 +5,7 @@
  *	isn't making full use of the device functionality but it is
  *	easy to get working.
  *
- *	(c) 2006 Red Hat  <alan@redhat.com>
+ *	(c) 2006 Red Hat
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 7d7e3fdab71..7c8faa48b5f 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -1,7 +1,7 @@
 /*
  * pata_mpiix.c 	- Intel MPIIX PATA for new ATA layer
  *			  (C) 2005-2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * The MPIIX is different enough to the PIIX4 and friends that we give it
  * a separate driver. The old ide/pci code handles this by just not tuning
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index d9719c8b9db..9dc05e1656a 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -1,7 +1,7 @@
 /*
  *    pata_netcell.c - Netcell PATA driver
  *
- *	(c) 2006 Red Hat  <alan@redhat.com>
+ *	(c) 2006 Red Hat
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 565e67cd13f..4e466eae8b4 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -1,7 +1,6 @@
 /*
  * pata_ninja32.c 	- Ninja32 PATA for new ATA layer
  *			  (C) 2007 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * Note: The controller like many controllers has shared timings for
  * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back
@@ -45,7 +44,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_ninja32"
-#define DRV_VERSION "0.0.1"
+#define DRV_VERSION "0.1.1"
 
 
 /**
@@ -89,6 +88,17 @@ static struct ata_port_operations ninja32_port_ops = {
 	.set_piomode	= ninja32_set_piomode,
 };
 
+static void ninja32_program(void __iomem *base)
+{
+	iowrite8(0x05, base + 0x01);	/* Enable interrupt lines */
+	iowrite8(0xBE, base + 0x02);	/* Burst, ?? setup */
+	iowrite8(0x01, base + 0x03);	/* Unknown */
+	iowrite8(0x20, base + 0x04);	/* WAIT0 */
+	iowrite8(0x8f, base + 0x05);	/* Unknown */
+	iowrite8(0xa4, base + 0x1c);	/* Unknown */
+	iowrite8(0x83, base + 0x1d);	/* BMDMA control: WAIT0 */
+}
+
 static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct ata_host *host;
@@ -134,18 +144,28 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	ap->ioaddr.bmdma_addr = base;
 	ata_sff_std_ports(&ap->ioaddr);
 
-	iowrite8(0x05, base + 0x01);	/* Enable interrupt lines */
-	iowrite8(0xBE, base + 0x02);	/* Burst, ?? setup */
-	iowrite8(0x01, base + 0x03);	/* Unknown */
-	iowrite8(0x20, base + 0x04);	/* WAIT0 */
-	iowrite8(0x8f, base + 0x05);	/* Unknown */
-	iowrite8(0xa4, base + 0x1c);	/* Unknown */
-	iowrite8(0x83, base + 0x1d);	/* BMDMA control: WAIT0 */
+	ninja32_program(base);
 	/* FIXME: Should we disable them at remove ? */
 	return ata_host_activate(host, dev->irq, ata_sff_interrupt,
 				 IRQF_SHARED, &ninja32_sht);
 }
 
+#ifdef CONFIG_PM
+
+static int ninja32_reinit_one(struct pci_dev *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+	ninja32_program(host->iomap[0]);
+	ata_host_resume(host);
+	return 0;			
+}
+#endif
+
 static const struct pci_device_id ninja32[] = {
 	{ 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
@@ -156,7 +176,11 @@ static struct pci_driver ninja32_pci_driver = {
 	.name 		= DRV_NAME,
 	.id_table	= ninja32,
 	.probe 		= ninja32_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ninja32_reinit_one,
+#endif
 };
 
 static int __init ninja32_init(void)
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index be756b7ef07..40d411c460d 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -1,7 +1,6 @@
 /*
  * pata_ns87410.c 	- National Semiconductor 87410 PATA for new ATA layer
  *			  (C) 2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index e0aa7eaaee0..89bf5f865d6 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -1,7 +1,7 @@
 /*
  *    pata_ns87415.c - NS87415 (non PARISC) PATA
  *
- *	(C) 2005 Red Hat <alan@redhat.com>
+ *	(C) 2005 Red Hat <alan@lxorguk.ukuu.org.uk>
  *
  *    This is a fairly generic MWDMA controller. It has some limitations
  *    as it requires timing reloads on PIO/DMA transitions but it is otherwise
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index df64f244300..c0dbc46a348 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -1,7 +1,7 @@
 /*
  *    pata_oldpiix.c - Intel PATA/SATA controllers
  *
- *	(C) 2005 Red Hat <alan@redhat.com>
+ *	(C) 2005 Red Hat
  *
  *    Some parts based on ata_piix.c by Jeff Garzik and others.
  *
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index fb2cf661b0e..e4fa4d565e9 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -1,7 +1,6 @@
 /*
  * pata_opti.c 	- ATI PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * Based on
  *  linux/drivers/ide/pci/opti621.c		Version 0.7	Sept 10, 2002
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 4cd74445631..93bb6e91973 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -1,7 +1,6 @@
 /*
  * pata_optidma.c 	- Opti DMA PATA for new ATA layer
  *			  (C) 2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  *	The Opti DMA controllers are related to the older PIO PCI controllers
  *	and indeed the VLB ones. The main differences are that the timing
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 02b596b9cf6..271cb64d429 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -1,6 +1,6 @@
 /*
  *   pata_pcmcia.c - PCMCIA PATA controller driver.
- *   Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved.
+ *   Copyright 2005-2006 Red Hat Inc, all rights reserved.
  *   PCMCIA ident update Copyright 2006 Marcin Juszkiewicz
  *						<openembedded@hrw.one.pl>
  *
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index d2673060bc8..799a6a09871 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -1,7 +1,7 @@
 /*
  * pata_pdc202xx_old.c 	- Promise PDC202xx PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
  *			  (C) 2007 Bartlomiej Zolnierkiewicz
  *
  * Based in part on linux/drivers/ide/pci/pdc202xx_old.c
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 8f65ad61b8a..77e4e3b17f5 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -5,7 +5,7 @@
  *
  * Based on pata_pcmcia:
  *
- *   Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved.
+ *   Copyright 2005-2006 Red Hat Inc, all rights reserved.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 63b7a1c165a..3080f371222 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -1,6 +1,6 @@
 /*
  *    pata_qdi.c - QDI VLB ATA controllers
- *	(C) 2006 Red Hat <alan@redhat.com>
+ *	(C) 2006 Red Hat
  *
  * This driver mostly exists as a proof of concept for non PCI devices under
  * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 1c0d9fa7ee5..0b0aa452de1 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -1,7 +1,7 @@
 /*
  *    pata_radisys.c - Intel PATA/SATA controllers
  *
- *	(C) 2006 Red Hat <alan@redhat.com>
+ *	(C) 2006 Red Hat <alan@lxorguk.ukuu.org.uk>
  *
  *    Some parts based on ata_piix.c by Jeff Garzik and others.
  *
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 0278fd2b8fb..9a4bdca5461 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -1,5 +1,5 @@
 /*
- * New ATA layer SC1200 driver		Alan Cox <alan@redhat.com>
+ * New ATA layer SC1200 driver		Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * TODO: Mode selection filtering
  * TODO: Can't enable second channel until ATA core has serialize
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 16673d16857..cf3707e516a 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -8,7 +8,7 @@
  *  Copyright 2003-2005 Jeff Garzik
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- *  Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
+ *  Copyright (C) 2003 Red Hat Inc
  *
  * and drivers/ata/ahci.c:
  *  Copyright 2004-2005 Red Hat, Inc.
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index ffd26d0dc50..72e41c9f969 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -1,7 +1,6 @@
 /*
  * pata_serverworks.c 	- Serverworks PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * based upon
  *
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index a598bb36aaf..83580a59db5 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -1,7 +1,6 @@
 /*
  * pata_sil680.c 	- SIL680 PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * based upon
  *
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 26345d7b531..d3423661175 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -1,7 +1,7 @@
 /*
  *    pata_sis.c - SiS ATA driver
  *
- *	(C) 2005 Red Hat <alan@redhat.com>
+ *	(C) 2005 Red Hat
  *	(C) 2007 Bartlomiej Zolnierkiewicz
  *
  *    Based upon linux/drivers/ide/pci/sis5513.c
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 69877bd8181..1b0e7b6d8ef 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -1,7 +1,6 @@
 /*
  * pata_sl82c105.c 	- SL82C105 PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * Based in part on linux/drivers/ide/pci/sl82c105.c
  * 		SL82C105/Winbond 553 IDE driver
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index b181261f274..ef9597517cd 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -1,7 +1,7 @@
 /*
  * pata_triflex.c 	- Compaq PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * based upon
  *
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 8fdb2ce7321..681169c9c64 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -1,7 +1,6 @@
 /*
  * pata_via.c 	- VIA PATA for new ATA layer
  *			  (C) 2005-2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  *  Documentation
  *	Most chipset documentation available under NDA only
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index a7606b044a6..319e164a3d7 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -1,6 +1,6 @@
 /*
  *    pata_winbond.c - Winbond VLB ATA controllers
- *	(C) 2006 Red Hat <alan@redhat.com>
+ *	(C) 2006 Red Hat
  *
  *    Support for the Winbond 83759A when operating in advanced mode.
  *    Multichip mode is not currently supported.
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 4621807a1a6..ccee930f1e1 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -1329,6 +1329,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
+	/* Set max read request size to 4096.  This slightly increases
+	 * write throughput for pci-e variants.
+	 */
+	pcie_set_readrq(pdev, 4096);
+
 	sil24_init_controller(host);
 
 	pci_set_master(pdev);
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 75dd6e22faf..c98c31ec2f7 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -355,7 +355,7 @@ static void __sysdev_resume(struct sys_device *dev)
  *	sysdev_suspend - Suspend all system devices.
  *	@state:		Power state to enter.
  *
- *	We perform an almost identical operation as sys_device_shutdown()
+ *	We perform an almost identical operation as sysdev_shutdown()
  *	above, though calling ->suspend() instead. Interrupts are disabled
  *	when this called. Devices are responsible for both saving state and
  *	quiescing or powering down the device.
@@ -437,7 +437,7 @@ aux_driver:
 /**
  *	sysdev_resume - Bring system devices back to life.
  *
- *	Similar to sys_device_suspend(), but we iterate the list forwards
+ *	Similar to sysdev_suspend(), but we iterate the list forwards
  *	to guarantee that parent devices are resumed before their children.
  *
  *	Note: Interrupts are disabled when called.
@@ -488,7 +488,8 @@ ssize_t sysdev_store_ulong(struct sys_device *sysdev,
 	if (end == buf)
 		return -EINVAL;
 	*(unsigned long *)(ea->var) = new;
-	return end - buf;
+	/* Always return full write size even if we didn't consume all */
+	return size;
 }
 EXPORT_SYMBOL_GPL(sysdev_store_ulong);
 
@@ -511,7 +512,8 @@ ssize_t sysdev_store_int(struct sys_device *sysdev,
 	if (end == buf || new > INT_MAX || new < INT_MIN)
 		return -EINVAL;
 	*(int *)(ea->var) = new;
-	return end - buf;
+	/* Always return full write size even if we didn't consume all */
+	return size;
 }
 EXPORT_SYMBOL_GPL(sysdev_store_int);
 
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 3f09cd8bcc3..5c4ee70d5cf 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -40,8 +40,7 @@
  * Heinz Mauelshagen <mge@sistina.com>, Feb 2002
  *
  * Support for falling back on the write file operation when the address space
- * operations prepare_write and/or commit_write are not available on the
- * backing filesystem.
+ * operations write_begin is not available on the backing filesystem.
  * Anton Altaparmakov, 16 Feb 2005
  *
  * Still To Fix:
@@ -765,7 +764,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
 		 */
 		if (!file->f_op->splice_read)
 			goto out_putf;
-		if (aops->prepare_write || aops->write_begin)
+		if (aops->write_begin)
 			lo_flags |= LO_FLAGS_USE_AOPS;
 		if (!(lo_flags & LO_FLAGS_USE_AOPS) && !file->f_op->write)
 			lo_flags |= LO_FLAGS_READ_ONLY;
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index e6ee21d99d9..b0e569ba730 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -867,7 +867,7 @@ static int bluecard_probe(struct pcmcia_device *link)
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 
 	link->irq.Handler = bluecard_interrupt;
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 2cbe70b6647..b3e4d07a4ac 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -343,6 +343,7 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
 	bt3c_info_t *info = dev_inst;
 	unsigned int iobase;
 	int iir;
+	irqreturn_t r = IRQ_NONE;
 
 	BUG_ON(!info->hdev);
 
@@ -374,11 +375,12 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
 
 			outb(iir, iobase + CONTROL);
 		}
+		r = IRQ_HANDLED;
 	}
 
 	spin_unlock(&(info->lock));
 
-	return IRQ_HANDLED;
+	return r;
 }
 
 
@@ -657,7 +659,7 @@ static int bt3c_probe(struct pcmcia_device *link)
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 
 	link->irq.Handler = bt3c_interrupt;
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 8e556b7ff9f..efd689a062e 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -293,6 +293,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst)
 	unsigned int iobase;
 	int boguscount = 0;
 	int iir, lsr;
+	irqreturn_t r = IRQ_NONE;
 
 	BUG_ON(!info->hdev);
 
@@ -302,6 +303,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst)
 
 	iir = inb(iobase + UART_IIR) & UART_IIR_ID;
 	while (iir) {
+		r = IRQ_HANDLED;
 
 		/* Clear interrupt */
 		lsr = inb(iobase + UART_LSR);
@@ -335,7 +337,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst)
 
 	spin_unlock(&(info->lock));
 
-	return IRQ_HANDLED;
+	return r;
 }
 
 
@@ -586,7 +588,7 @@ static int btuart_probe(struct pcmcia_device *link)
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 
 	link->irq.Handler = btuart_interrupt;
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index e6e6b037695..901bdd95655 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -297,6 +297,7 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst)
 	unsigned char msr;
 	int boguscount = 0;
 	int iir, lsr;
+	irqreturn_t r = IRQ_NONE;
 
 	BUG_ON(!info->hdev);
 
@@ -307,6 +308,7 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst)
 	iir = inb(iobase + UART_IIR) & UART_IIR_ID;
 	while (iir) {
 
+		r = IRQ_HANDLED;
 		/* Clear interrupt */
 		lsr = inb(iobase + UART_LSR);
 
@@ -343,11 +345,12 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst)
 		info->ri_latch = msr & UART_MSR_RI;
 		clear_bit(XMIT_WAITING, &(info->tx_state));
 		dtl1_write_wakeup(info);
+		r = IRQ_HANDLED;
 	}
 
 	spin_unlock(&(info->lock));
 
-	return IRQ_HANDLED;
+	return r;
 }
 
 
@@ -568,7 +571,7 @@ static int dtl1_probe(struct pcmcia_device *link)
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 
 	link->irq.Handler = dtl1_interrupt;
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 122254155ae..43b35d0369d 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -812,28 +812,6 @@ config JS_RTC
 	  To compile this driver as a module, choose M here: the
 	  module will be called js-rtc.
 
-config SGI_DS1286
-	tristate "SGI DS1286 RTC support"
-	depends on SGI_HAS_DS1286
-	help
-	  If you say Y here and create a character special file /dev/rtc with
-	  major number 10 and minor number 135 using mknod ("man mknod"), you
-	  will get access to the real time clock built into your computer.
-	  Every SGI has such a clock built in. It reports status information
-	  via the file /proc/rtc and its behaviour is set by various ioctls on
-	  /dev/rtc.
-
-config SGI_IP27_RTC
-	bool "SGI M48T35 RTC support"
-	depends on SGI_IP27
-	help
-	  If you say Y here and create a character special file /dev/rtc with
-	  major number 10 and minor number 135 using mknod ("man mknod"), you
-	  will get access to the real time clock built into your computer.
-	  Every SGI has such a clock built in. It reports status information
-	  via the file /proc/rtc and its behaviour is set by various ioctls on
-	  /dev/rtc.
-
 config GEN_RTC
 	tristate "Generic /dev/rtc emulation"
 	depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 1a4247dccac..438f71317c5 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -74,8 +74,6 @@ obj-$(CONFIG_RTC)		+= rtc.o
 obj-$(CONFIG_HPET)		+= hpet.o
 obj-$(CONFIG_GEN_RTC)		+= genrtc.o
 obj-$(CONFIG_EFI_RTC)		+= efirtc.o
-obj-$(CONFIG_SGI_DS1286)	+= ds1286.o
-obj-$(CONFIG_SGI_IP27_RTC)	+= ip27-rtc.o
 obj-$(CONFIG_DS1302)		+= ds1302.o
 obj-$(CONFIG_XILINX_HWICAP)	+= xilinx_hwicap/
 ifeq ($(CONFIG_GENERIC_NVRAM),y)
diff --git a/drivers/char/ds1286.c b/drivers/char/ds1286.c
deleted file mode 100644
index 0a826d7be10..00000000000
--- a/drivers/char/ds1286.c
+++ /dev/null
@@ -1,585 +0,0 @@
-/*
- * DS1286 Real Time Clock interface for Linux
- *
- * Copyright (C) 1998, 1999, 2000 Ralf Baechle
- *
- * Based on code written by Paul Gortmaker.
- *
- * This driver allows use of the real time clock (built into nearly all
- * computers) from user space. It exports the /dev/rtc interface supporting
- * various ioctl() and also the /proc/rtc pseudo-file for status
- * information.
- *
- * The ioctls can be used to set the interrupt behaviour and generation rate
- * from the RTC via IRQ 8. Then the /dev/rtc interface can be used to make
- * use of these timer interrupts, be they interval or alarm based.
- *
- * The /dev/rtc interface will block on reads until an interrupt has been
- * received. If a RTC interrupt has already happened, it will output an
- * unsigned long and then block. The output value contains the interrupt
- * status in the low byte and the number of interrupts since the last read
- * in the remaining high bytes. The /dev/rtc interface can also be used with
- * the select(2) call.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/ds1286.h>
-#include <linux/smp_lock.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/rtc.h>
-#include <linux/spinlock.h>
-#include <linux/bcd.h>
-#include <linux/proc_fs.h>
-#include <linux/jiffies.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-
-#define DS1286_VERSION		"1.0"
-
-/*
- *	We sponge a minor off of the misc major. No need slurping
- *	up another valuable major dev number for this. If you add
- *	an ioctl, make sure you don't conflict with SPARC's RTC
- *	ioctls.
- */
-
-static DECLARE_WAIT_QUEUE_HEAD(ds1286_wait);
-
-static ssize_t ds1286_read(struct file *file, char *buf,
-			size_t count, loff_t *ppos);
-
-static int ds1286_ioctl(struct inode *inode, struct file *file,
-                        unsigned int cmd, unsigned long arg);
-
-static unsigned int ds1286_poll(struct file *file, poll_table *wait);
-
-static void ds1286_get_alm_time (struct rtc_time *alm_tm);
-static void ds1286_get_time(struct rtc_time *rtc_tm);
-static int ds1286_set_time(struct rtc_time *rtc_tm);
-
-static inline unsigned char ds1286_is_updating(void);
-
-static DEFINE_SPINLOCK(ds1286_lock);
-
-static int ds1286_read_proc(char *page, char **start, off_t off,
-                            int count, int *eof, void *data);
-
-/*
- *	Bits in rtc_status. (7 bits of room for future expansion)
- */
-
-#define RTC_IS_OPEN		0x01	/* means /dev/rtc is in use	*/
-#define RTC_TIMER_ON		0x02	/* missed irq timer active	*/
-
-static unsigned char ds1286_status;	/* bitmapped status byte.	*/
-
-static unsigned char days_in_mo[] = {
-	0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-};
-
-/*
- *	Now all the various file operations that we export.
- */
-
-static ssize_t ds1286_read(struct file *file, char *buf,
-                           size_t count, loff_t *ppos)
-{
-	return -EIO;
-}
-
-static int ds1286_ioctl(struct inode *inode, struct file *file,
-                        unsigned int cmd, unsigned long arg)
-{
-	struct rtc_time wtime;
-
-	switch (cmd) {
-	case RTC_AIE_OFF:	/* Mask alarm int. enab. bit	*/
-	{
-		unsigned long flags;
-		unsigned char val;
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		spin_lock_irqsave(&ds1286_lock, flags);
-		val = rtc_read(RTC_CMD);
-		val |=  RTC_TDM;
-		rtc_write(val, RTC_CMD);
-		spin_unlock_irqrestore(&ds1286_lock, flags);
-
-		return 0;
-	}
-	case RTC_AIE_ON:	/* Allow alarm interrupts.	*/
-	{
-		unsigned long flags;
-		unsigned char val;
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		spin_lock_irqsave(&ds1286_lock, flags);
-		val = rtc_read(RTC_CMD);
-		val &=  ~RTC_TDM;
-		rtc_write(val, RTC_CMD);
-		spin_unlock_irqrestore(&ds1286_lock, flags);
-
-		return 0;
-	}
-	case RTC_WIE_OFF:	/* Mask watchdog int. enab. bit	*/
-	{
-		unsigned long flags;
-		unsigned char val;
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		spin_lock_irqsave(&ds1286_lock, flags);
-		val = rtc_read(RTC_CMD);
-		val |= RTC_WAM;
-		rtc_write(val, RTC_CMD);
-		spin_unlock_irqrestore(&ds1286_lock, flags);
-
-		return 0;
-	}
-	case RTC_WIE_ON:	/* Allow watchdog interrupts.	*/
-	{
-		unsigned long flags;
-		unsigned char val;
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		spin_lock_irqsave(&ds1286_lock, flags);
-		val = rtc_read(RTC_CMD);
-		val &= ~RTC_WAM;
-		rtc_write(val, RTC_CMD);
-		spin_unlock_irqrestore(&ds1286_lock, flags);
-
-		return 0;
-	}
-	case RTC_ALM_READ:	/* Read the present alarm time */
-	{
-		/*
-		 * This returns a struct rtc_time. Reading >= 0xc0
-		 * means "don't care" or "match all". Only the tm_hour,
-		 * tm_min, and tm_sec values are filled in.
-		 */
-
-		memset(&wtime, 0, sizeof(wtime));
-		ds1286_get_alm_time(&wtime);
-		break;
-	}
-	case RTC_ALM_SET:	/* Store a time into the alarm */
-	{
-		/*
-		 * This expects a struct rtc_time. Writing 0xff means
-		 * "don't care" or "match all". Only the tm_hour,
-		 * tm_min and tm_sec are used.
-		 */
-		unsigned char hrs, min, sec;
-		struct rtc_time alm_tm;
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		if (copy_from_user(&alm_tm, (struct rtc_time*)arg,
-				   sizeof(struct rtc_time)))
-			return -EFAULT;
-
-		hrs = alm_tm.tm_hour;
-		min = alm_tm.tm_min;
-		sec = alm_tm.tm_sec;
-
-		if (hrs >= 24)
-			hrs = 0xff;
-
-		if (min >= 60)
-			min = 0xff;
-
-		if (sec != 0)
-			return -EINVAL;
-
-		min = bin2bcd(min);
-		min = bin2bcd(hrs);
-
-		spin_lock(&ds1286_lock);
-		rtc_write(hrs, RTC_HOURS_ALARM);
-		rtc_write(min, RTC_MINUTES_ALARM);
-		spin_unlock(&ds1286_lock);
-
-		return 0;
-	}
-	case RTC_RD_TIME:	/* Read the time/date from RTC	*/
-	{
-		memset(&wtime, 0, sizeof(wtime));
-		ds1286_get_time(&wtime);
-		break;
-	}
-	case RTC_SET_TIME:	/* Set the RTC */
-	{
-		struct rtc_time rtc_tm;
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		if (copy_from_user(&rtc_tm, (struct rtc_time*)arg,
-				   sizeof(struct rtc_time)))
-			return -EFAULT;
-
-		return ds1286_set_time(&rtc_tm);
-	}
-	default:
-		return -EINVAL;
-	}
-	return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0;
-}
-
-/*
- *	We enforce only one user at a time here with the open/close.
- *	Also clear the previous interrupt data on an open, and clean
- *	up things on a close.
- */
-
-static int ds1286_open(struct inode *inode, struct file *file)
-{
-	lock_kernel();
-	spin_lock_irq(&ds1286_lock);
-
-	if (ds1286_status & RTC_IS_OPEN)
-		goto out_busy;
-
-	ds1286_status |= RTC_IS_OPEN;
-
-	spin_unlock_irq(&ds1286_lock);
-	unlock_kernel();
-	return 0;
-
-out_busy:
-	spin_lock_irq(&ds1286_lock);
-	unlock_kernel();
-	return -EBUSY;
-}
-
-static int ds1286_release(struct inode *inode, struct file *file)
-{
-	ds1286_status &= ~RTC_IS_OPEN;
-
-	return 0;
-}
-
-static unsigned int ds1286_poll(struct file *file, poll_table *wait)
-{
-	poll_wait(file, &ds1286_wait, wait);
-
-	return 0;
-}
-
-/*
- *	The various file operations we support.
- */
-
-static const struct file_operations ds1286_fops = {
-	.llseek		= no_llseek,
-	.read		= ds1286_read,
-	.poll		= ds1286_poll,
-	.ioctl		= ds1286_ioctl,
-	.open		= ds1286_open,
-	.release	= ds1286_release,
-};
-
-static struct miscdevice ds1286_dev=
-{
-	.minor	= RTC_MINOR,
-	.name	= "rtc",
-	.fops	= &ds1286_fops,
-};
-
-static int __init ds1286_init(void)
-{
-	int err;
-
-	printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION);
-
-	err = misc_register(&ds1286_dev);
-	if (err)
-		goto out;
-
-	if (!create_proc_read_entry("driver/rtc", 0, 0, ds1286_read_proc, NULL)) {
-		err = -ENOMEM;
-
-		goto out_deregister;
-	}
-
-	return 0;
-
-out_deregister:
-	misc_deregister(&ds1286_dev);
-
-out:
-	return err;
-}
-
-static void __exit ds1286_exit(void)
-{
-	remove_proc_entry("driver/rtc", NULL);
-	misc_deregister(&ds1286_dev);
-}
-
-static char *days[] = {
-	"***", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"
-};
-
-/*
- *	Info exported via "/proc/rtc".
- */
-static int ds1286_proc_output(char *buf)
-{
-	char *p, *s;
-	struct rtc_time tm;
-	unsigned char hundredth, month, cmd, amode;
-
-	p = buf;
-
-	ds1286_get_time(&tm);
-	hundredth = rtc_read(RTC_HUNDREDTH_SECOND);
-	hundredth = bcd2bin(hundredth);
-
-	p += sprintf(p,
-	             "rtc_time\t: %02d:%02d:%02d.%02d\n"
-	             "rtc_date\t: %04d-%02d-%02d\n",
-		     tm.tm_hour, tm.tm_min, tm.tm_sec, hundredth,
-		     tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
-
-	/*
-	 * We implicitly assume 24hr mode here. Alarm values >= 0xc0 will
-	 * match any value for that particular field. Values that are
-	 * greater than a valid time, but less than 0xc0 shouldn't appear.
-	 */
-	ds1286_get_alm_time(&tm);
-	p += sprintf(p, "alarm\t\t: %s ", days[tm.tm_wday]);
-	if (tm.tm_hour <= 24)
-		p += sprintf(p, "%02d:", tm.tm_hour);
-	else
-		p += sprintf(p, "**:");
-
-	if (tm.tm_min <= 59)
-		p += sprintf(p, "%02d\n", tm.tm_min);
-	else
-		p += sprintf(p, "**\n");
-
-	month = rtc_read(RTC_MONTH);
-	p += sprintf(p,
-	             "oscillator\t: %s\n"
-	             "square_wave\t: %s\n",
-	             (month & RTC_EOSC) ? "disabled" : "enabled",
-	             (month & RTC_ESQW) ? "disabled" : "enabled");
-
-	amode = ((rtc_read(RTC_MINUTES_ALARM) & 0x80) >> 5) |
-	        ((rtc_read(RTC_HOURS_ALARM) & 0x80) >> 6) |
-	        ((rtc_read(RTC_DAY_ALARM) & 0x80) >> 7);
-	if (amode == 7)      s = "each minute";
-	else if (amode == 3) s = "minutes match";
-	else if (amode == 1) s = "hours and minutes match";
-	else if (amode == 0) s = "days, hours and minutes match";
-	else                 s = "invalid";
-	p += sprintf(p, "alarm_mode\t: %s\n", s);
-
-	cmd = rtc_read(RTC_CMD);
-	p += sprintf(p,
-	             "alarm_enable\t: %s\n"
-	             "wdog_alarm\t: %s\n"
-	             "alarm_mask\t: %s\n"
-	             "wdog_alarm_mask\t: %s\n"
-	             "interrupt_mode\t: %s\n"
-	             "INTB_mode\t: %s_active\n"
-	             "interrupt_pins\t: %s\n",
-		     (cmd & RTC_TDF) ? "yes" : "no",
-		     (cmd & RTC_WAF) ? "yes" : "no",
-		     (cmd & RTC_TDM) ? "disabled" : "enabled",
-		     (cmd & RTC_WAM) ? "disabled" : "enabled",
-		     (cmd & RTC_PU_LVL) ? "pulse" : "level",
-		     (cmd & RTC_IBH_LO) ? "low" : "high",
-	             (cmd & RTC_IPSW) ? "unswapped" : "swapped");
-
-	return  p - buf;
-}
-
-static int ds1286_read_proc(char *page, char **start, off_t off,
-                         int count, int *eof, void *data)
-{
-	int len = ds1286_proc_output (page);
-	if (len <= off+count) *eof = 1;
-	*start = page + off;
-	len -= off;
-	if (len>count)
-		len = count;
-	if (len<0)
-		len = 0;
-
-	return len;
-}
-
-/*
- * Returns true if a clock update is in progress
- */
-static inline unsigned char ds1286_is_updating(void)
-{
-	return rtc_read(RTC_CMD) & RTC_TE;
-}
-
-
-static void ds1286_get_time(struct rtc_time *rtc_tm)
-{
-	unsigned char save_control;
-	unsigned long flags;
-
-	/*
-	 * read RTC once any update in progress is done. The update
-	 * can take just over 2ms. We wait 10 to 20ms. There is no need to
-	 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
-	 * If you need to know *exactly* when a second has started, enable
-	 * periodic update complete interrupts, (via ioctl) and then
-	 * immediately read /dev/rtc which will block until you get the IRQ.
-	 * Once the read clears, read the RTC time (again via ioctl). Easy.
-	 */
-
-	if (ds1286_is_updating() != 0)
-		msleep(20);
-
-	/*
-	 * Only the values that we read from the RTC are set. We leave
-	 * tm_wday, tm_yday and tm_isdst untouched. Even though the
-	 * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
-	 * by the RTC when initially set to a non-zero value.
-	 */
-	spin_lock_irqsave(&ds1286_lock, flags);
-	save_control = rtc_read(RTC_CMD);
-	rtc_write((save_control|RTC_TE), RTC_CMD);
-
-	rtc_tm->tm_sec = rtc_read(RTC_SECONDS);
-	rtc_tm->tm_min = rtc_read(RTC_MINUTES);
-	rtc_tm->tm_hour = rtc_read(RTC_HOURS) & 0x3f;
-	rtc_tm->tm_mday = rtc_read(RTC_DATE);
-	rtc_tm->tm_mon = rtc_read(RTC_MONTH) & 0x1f;
-	rtc_tm->tm_year = rtc_read(RTC_YEAR);
-
-	rtc_write(save_control, RTC_CMD);
-	spin_unlock_irqrestore(&ds1286_lock, flags);
-
-	rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
-	rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
-	rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
-	rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
-	rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon);
-	rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
-
-	/*
-	 * Account for differences between how the RTC uses the values
-	 * and how they are defined in a struct rtc_time;
-	 */
-	if (rtc_tm->tm_year < 45)
-		rtc_tm->tm_year += 30;
-	if ((rtc_tm->tm_year += 40) < 70)
-		rtc_tm->tm_year += 100;
-
-	rtc_tm->tm_mon--;
-}
-
-static int ds1286_set_time(struct rtc_time *rtc_tm)
-{
-	unsigned char mon, day, hrs, min, sec, leap_yr;
-	unsigned char save_control;
-	unsigned int yrs;
-	unsigned long flags;
-
-
-	yrs = rtc_tm->tm_year + 1900;
-	mon = rtc_tm->tm_mon + 1;   /* tm_mon starts at zero */
-	day = rtc_tm->tm_mday;
-	hrs = rtc_tm->tm_hour;
-	min = rtc_tm->tm_min;
-	sec = rtc_tm->tm_sec;
-
-	if (yrs < 1970)
-		return -EINVAL;
-
-	leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
-
-	if ((mon > 12) || (day == 0))
-		return -EINVAL;
-
-	if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
-		return -EINVAL;
-
-	if ((hrs >= 24) || (min >= 60) || (sec >= 60))
-		return -EINVAL;
-
-	if ((yrs -= 1940) > 255)    /* They are unsigned */
-		return -EINVAL;
-
-	if (yrs >= 100)
-		yrs -= 100;
-
-	sec = bin2bcd(sec);
-	min = bin2bcd(min);
-	hrs = bin2bcd(hrs);
-	day = bin2bcd(day);
-	mon = bin2bcd(mon);
-	yrs = bin2bcd(yrs);
-
-	spin_lock_irqsave(&ds1286_lock, flags);
-	save_control = rtc_read(RTC_CMD);
-	rtc_write((save_control|RTC_TE), RTC_CMD);
-
-	rtc_write(yrs, RTC_YEAR);
-	rtc_write(mon, RTC_MONTH);
-	rtc_write(day, RTC_DATE);
-	rtc_write(hrs, RTC_HOURS);
-	rtc_write(min, RTC_MINUTES);
-	rtc_write(sec, RTC_SECONDS);
-	rtc_write(0, RTC_HUNDREDTH_SECOND);
-
-	rtc_write(save_control, RTC_CMD);
-	spin_unlock_irqrestore(&ds1286_lock, flags);
-
-	return 0;
-}
-
-static void ds1286_get_alm_time(struct rtc_time *alm_tm)
-{
-	unsigned char cmd;
-	unsigned long flags;
-
-	/*
-	 * Only the values that we read from the RTC are set. That
-	 * means only tm_wday, tm_hour, tm_min.
-	 */
-	spin_lock_irqsave(&ds1286_lock, flags);
-	alm_tm->tm_min = rtc_read(RTC_MINUTES_ALARM) & 0x7f;
-	alm_tm->tm_hour = rtc_read(RTC_HOURS_ALARM)  & 0x1f;
-	alm_tm->tm_wday = rtc_read(RTC_DAY_ALARM)    & 0x07;
-	cmd = rtc_read(RTC_CMD);
-	spin_unlock_irqrestore(&ds1286_lock, flags);
-
-	alm_tm->tm_min = bcd2bin(alm_tm->tm_min);
-	alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour);
-	alm_tm->tm_sec = 0;
-}
-
-module_init(ds1286_init);
-module_exit(ds1286_exit);
-
-MODULE_AUTHOR("Ralf Baechle");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(RTC_MINOR);
diff --git a/drivers/char/ip27-rtc.c b/drivers/char/ip27-rtc.c
deleted file mode 100644
index 2abd881b4cb..00000000000
--- a/drivers/char/ip27-rtc.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- *	Driver for the SGS-Thomson M48T35 Timekeeper RAM chip
- *
- *	Real Time Clock interface for Linux
- *
- *	TODO: Implement periodic interrupts.
- *
- *	Copyright (C) 2000 Silicon Graphics, Inc.
- *	Written by Ulf Carlsson (ulfc@engr.sgi.com)
- *
- *	Based on code written by Paul Gortmaker.
- *
- *	This driver allows use of the real time clock (built into
- *	nearly all computers) from user space. It exports the /dev/rtc
- *	interface supporting various ioctl() and also the /proc/rtc
- *	pseudo-file for status information.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- */
-
-#define RTC_VERSION		"1.09b"
-
-#include <linux/bcd.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/smp_lock.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/rtc.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-
-#include <asm/m48t35.h>
-#include <asm/sn/ioc3.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/sn0/ip27.h>
-#include <asm/sn/sn0/hub.h>
-#include <asm/sn/sn_private.h>
-
-static long rtc_ioctl(struct file *filp, unsigned int cmd,
-			unsigned long arg);
-
-static int rtc_read_proc(char *page, char **start, off_t off,
-                         int count, int *eof, void *data);
-
-static void get_rtc_time(struct rtc_time *rtc_tm);
-
-/*
- *	Bits in rtc_status. (6 bits of room for future expansion)
- */
-
-#define RTC_IS_OPEN		0x01	/* means /dev/rtc is in use	*/
-#define RTC_TIMER_ON		0x02	/* missed irq timer active	*/
-
-static unsigned char rtc_status;	/* bitmapped status byte.	*/
-static unsigned long rtc_freq;	/* Current periodic IRQ rate	*/
-static struct m48t35_rtc *rtc;
-
-/*
- *	If this driver ever becomes modularised, it will be really nice
- *	to make the epoch retain its value across module reload...
- */
-
-static unsigned long epoch = 1970;	/* year corresponding to 0x00	*/
-
-static const unsigned char days_in_mo[] =
-{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
-static long rtc_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
-
-	struct rtc_time wtime;
-
-	switch (cmd) {
-	case RTC_RD_TIME:	/* Read the time/date from RTC	*/
-	{
-		get_rtc_time(&wtime);
-		break;
-	}
-	case RTC_SET_TIME:	/* Set the RTC */
-	{
-		struct rtc_time rtc_tm;
-		unsigned char mon, day, hrs, min, sec, leap_yr;
-		unsigned int yrs;
-
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		if (copy_from_user(&rtc_tm, (struct rtc_time*)arg,
-				   sizeof(struct rtc_time)))
-			return -EFAULT;
-
-		yrs = rtc_tm.tm_year + 1900;
-		mon = rtc_tm.tm_mon + 1;   /* tm_mon starts at zero */
-		day = rtc_tm.tm_mday;
-		hrs = rtc_tm.tm_hour;
-		min = rtc_tm.tm_min;
-		sec = rtc_tm.tm_sec;
-
-		if (yrs < 1970)
-			return -EINVAL;
-
-		leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
-
-		if ((mon > 12) || (day == 0))
-			return -EINVAL;
-
-		if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
-			return -EINVAL;
-
-		if ((hrs >= 24) || (min >= 60) || (sec >= 60))
-			return -EINVAL;
-
-		if ((yrs -= epoch) > 255)    /* They are unsigned */
-			return -EINVAL;
-
-		if (yrs > 169)
-			return -EINVAL;
-
-		if (yrs >= 100)
-			yrs -= 100;
-
-		sec = bin2bcd(sec);
-		min = bin2bcd(min);
-		hrs = bin2bcd(hrs);
-		day = bin2bcd(day);
-		mon = bin2bcd(mon);
-		yrs = bin2bcd(yrs);
-
-		spin_lock_irq(&rtc_lock);
-		rtc->control |= M48T35_RTC_SET;
-		rtc->year = yrs;
-		rtc->month = mon;
-		rtc->date = day;
-		rtc->hour = hrs;
-		rtc->min = min;
-		rtc->sec = sec;
-		rtc->control &= ~M48T35_RTC_SET;
-		spin_unlock_irq(&rtc_lock);
-
-		return 0;
-	}
-	default:
-		return -EINVAL;
-	}
-	return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0;
-}
-
-/*
- *	We enforce only one user at a time here with the open/close.
- *	Also clear the previous interrupt data on an open, and clean
- *	up things on a close.
- */
-
-static int rtc_open(struct inode *inode, struct file *file)
-{
-	lock_kernel();
-	spin_lock_irq(&rtc_lock);
-
-	if (rtc_status & RTC_IS_OPEN) {
-		spin_unlock_irq(&rtc_lock);
-		unlock_kernel();
-		return -EBUSY;
-	}
-
-	rtc_status |= RTC_IS_OPEN;
-	spin_unlock_irq(&rtc_lock);
-	unlock_kernel();
-
-	return 0;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
-	/*
-	 * Turn off all interrupts once the device is no longer
-	 * in use, and clear the data.
-	 */
-
-	spin_lock_irq(&rtc_lock);
-	rtc_status &= ~RTC_IS_OPEN;
-	spin_unlock_irq(&rtc_lock);
-
-	return 0;
-}
-
-/*
- *	The various file operations we support.
- */
-
-static const struct file_operations rtc_fops = {
-	.owner		= THIS_MODULE,
-	.unlocked_ioctl	= rtc_ioctl,
-	.open		= rtc_open,
-	.release	= rtc_release,
-};
-
-static struct miscdevice rtc_dev=
-{
-	RTC_MINOR,
-	"rtc",
-	&rtc_fops
-};
-
-static int __init rtc_init(void)
-{
-	rtc = (struct m48t35_rtc *)
-	(KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base + IOC3_BYTEBUS_DEV0);
-
-	printk(KERN_INFO "Real Time Clock Driver v%s\n", RTC_VERSION);
-	if (misc_register(&rtc_dev)) {
-		printk(KERN_ERR "rtc: cannot register misc device.\n");
-		return -ENODEV;
-	}
-	if (!create_proc_read_entry("driver/rtc", 0, NULL, rtc_read_proc, NULL)) {
-		printk(KERN_ERR "rtc: cannot create /proc/rtc.\n");
-		misc_deregister(&rtc_dev);
-		return -ENOENT;
-	}
-
-	rtc_freq = 1024;
-
-	return 0;
-}
-
-static void __exit rtc_exit (void)
-{
-	/* interrupts and timer disabled at this point by rtc_release */
-
-	remove_proc_entry ("rtc", NULL);
-	misc_deregister(&rtc_dev);
-}
-
-module_init(rtc_init);
-module_exit(rtc_exit);
-
-/*
- *	Info exported via "/proc/rtc".
- */
-
-static int rtc_get_status(char *buf)
-{
-	char *p;
-	struct rtc_time tm;
-
-	/*
-	 * Just emulate the standard /proc/rtc
-	 */
-
-	p = buf;
-
-	get_rtc_time(&tm);
-
-	/*
-	 * There is no way to tell if the luser has the RTC set for local
-	 * time or for Universal Standard Time (GMT). Probably local though.
-	 */
-	p += sprintf(p,
-		     "rtc_time\t: %02d:%02d:%02d\n"
-		     "rtc_date\t: %04d-%02d-%02d\n"
-	 	     "rtc_epoch\t: %04lu\n"
-		     "24hr\t\t: yes\n",
-		     tm.tm_hour, tm.tm_min, tm.tm_sec,
-		     tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, epoch);
-
-	return  p - buf;
-}
-
-static int rtc_read_proc(char *page, char **start, off_t off,
-                                 int count, int *eof, void *data)
-{
-        int len = rtc_get_status(page);
-        if (len <= off+count) *eof = 1;
-        *start = page + off;
-        len -= off;
-        if (len>count) len = count;
-        if (len<0) len = 0;
-        return len;
-}
-
-static void get_rtc_time(struct rtc_time *rtc_tm)
-{
-	/*
-	 * Do we need to wait for the last update to finish?
-	 */
-
-	/*
-	 * Only the values that we read from the RTC are set. We leave
-	 * tm_wday, tm_yday and tm_isdst untouched. Even though the
-	 * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
-	 * by the RTC when initially set to a non-zero value.
-	 */
-	spin_lock_irq(&rtc_lock);
-	rtc->control |= M48T35_RTC_READ;
-	rtc_tm->tm_sec = rtc->sec;
-	rtc_tm->tm_min = rtc->min;
-	rtc_tm->tm_hour = rtc->hour;
-	rtc_tm->tm_mday = rtc->date;
-	rtc_tm->tm_mon = rtc->month;
-	rtc_tm->tm_year = rtc->year;
-	rtc->control &= ~M48T35_RTC_READ;
-	spin_unlock_irq(&rtc_lock);
-
-	rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec);
-	rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min);
-	rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour);
-	rtc_tm->tm_mday = bcd2bin(rtc_tm->tm_mday);
-	rtc_tm->tm_mon = bcd2bin(rtc_tm->tm_mon);
-	rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year);
-
-	/*
-	 * Account for differences between how the RTC uses the values
-	 * and how they are defined in a struct rtc_time;
-	 */
-	if ((rtc_tm->tm_year += (epoch - 1900)) <= 69)
-		rtc_tm->tm_year += 100;
-
-	rtc_tm->tm_mon--;
-}
diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c
index 835a33c8d5f..1d7b429f7ff 100644
--- a/drivers/char/ipmi/ipmi_devintf.c
+++ b/drivers/char/ipmi/ipmi_devintf.c
@@ -957,3 +957,4 @@ module_exit(cleanup_ipmi);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
 MODULE_DESCRIPTION("Linux device interface for the IPMI message handler.");
+MODULE_ALIAS("platform:ipmi_si");
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 9a626e50b79..4d64a02612a 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -554,7 +554,7 @@ static int mgslpc_probe(struct pcmcia_device *link)
     /* Initialize the struct pcmcia_device structure */
 
     /* Interrupt setup */
-    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->irq.IRQInfo1   = IRQ_LEVEL_ID;
     link->irq.Handler = NULL;
 
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 5a11e3cbcae..e0dbd388757 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -102,6 +102,13 @@ config EDAC_I3000
 	  Support for error detection and correction on the Intel
 	  3000 and 3010 server chipsets.
 
+config EDAC_X38
+	tristate "Intel X38"
+	depends on EDAC_MM_EDAC && PCI && X86
+	help
+	  Support for error detection and correction on the Intel
+	  X38 server chipsets.
+
 config EDAC_I82860
 	tristate "Intel 82860"
 	depends on EDAC_MM_EDAC && PCI && X86_32
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index e5e9104b552..62c2d9bad8d 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_EDAC_I82443BXGX)		+= i82443bxgx_edac.o
 obj-$(CONFIG_EDAC_I82875P)		+= i82875p_edac.o
 obj-$(CONFIG_EDAC_I82975X)		+= i82975x_edac.o
 obj-$(CONFIG_EDAC_I3000)		+= i3000_edac.o
+obj-$(CONFIG_EDAC_X38)			+= x38_edac.o
 obj-$(CONFIG_EDAC_I82860)		+= i82860_edac.o
 obj-$(CONFIG_EDAC_R82600)		+= r82600_edac.o
 obj-$(CONFIG_EDAC_PASEMI)		+= pasemi_edac.o
diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c
index 887072f5dc8..cd2e3b8087e 100644
--- a/drivers/edac/cell_edac.c
+++ b/drivers/edac/cell_edac.c
@@ -9,6 +9,7 @@
  */
 #undef DEBUG
 
+#include <linux/edac.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -164,6 +165,8 @@ static int __devinit cell_edac_probe(struct platform_device *pdev)
 	if (regs == NULL)
 		return -ENODEV;
 
+	edac_op_state = EDAC_OPSTATE_POLL;
+
 	/* Get channel population */
 	reg = in_be64(&regs->mic_mnt_cfg);
 	dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg);
diff --git a/drivers/edac/x38_edac.c b/drivers/edac/x38_edac.c
new file mode 100644
index 00000000000..2406c2ce284
--- /dev/null
+++ b/drivers/edac/x38_edac.c
@@ -0,0 +1,524 @@
+/*
+ * Intel X38 Memory Controller kernel module
+ * Copyright (C) 2008 Cluster Computing, Inc.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ * This file is based on i3200_edac.c
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+#include "edac_core.h"
+
+#define X38_REVISION		"1.1"
+
+#define EDAC_MOD_STR		"x38_edac"
+
+#define PCI_DEVICE_ID_INTEL_X38_HB	0x29e0
+
+#define X38_RANKS		8
+#define X38_RANKS_PER_CHANNEL	4
+#define X38_CHANNELS		2
+
+/* Intel X38 register addresses - device 0 function 0 - DRAM Controller */
+
+#define X38_MCHBAR_LOW	0x48	/* MCH Memory Mapped Register BAR */
+#define X38_MCHBAR_HIGH	0x4b
+#define X38_MCHBAR_MASK	0xfffffc000ULL	/* bits 35:14 */
+#define X38_MMR_WINDOW_SIZE	16384
+
+#define X38_TOM	0xa0	/* Top of Memory (16b)
+				 *
+				 * 15:10 reserved
+				 *  9:0  total populated physical memory
+				 */
+#define X38_TOM_MASK	0x3ff	/* bits 9:0 */
+#define X38_TOM_SHIFT 26	/* 64MiB grain */
+
+#define X38_ERRSTS	0xc8	/* Error Status Register (16b)
+				 *
+				 * 15    reserved
+				 * 14    Isochronous TBWRR Run Behind FIFO Full
+				 *       (ITCV)
+				 * 13    Isochronous TBWRR Run Behind FIFO Put
+				 *       (ITSTV)
+				 * 12    reserved
+				 * 11    MCH Thermal Sensor Event
+				 *       for SMI/SCI/SERR (GTSE)
+				 * 10    reserved
+				 *  9    LOCK to non-DRAM Memory Flag (LCKF)
+				 *  8    reserved
+				 *  7    DRAM Throttle Flag (DTF)
+				 *  6:2  reserved
+				 *  1    Multi-bit DRAM ECC Error Flag (DMERR)
+				 *  0    Single-bit DRAM ECC Error Flag (DSERR)
+				 */
+#define X38_ERRSTS_UE		0x0002
+#define X38_ERRSTS_CE		0x0001
+#define X38_ERRSTS_BITS	(X38_ERRSTS_UE | X38_ERRSTS_CE)
+
+
+/* Intel  MMIO register space - device 0 function 0 - MMR space */
+
+#define X38_C0DRB	0x200	/* Channel 0 DRAM Rank Boundary (16b x 4)
+				 *
+				 * 15:10 reserved
+				 *  9:0  Channel 0 DRAM Rank Boundary Address
+				 */
+#define X38_C1DRB	0x600	/* Channel 1 DRAM Rank Boundary (16b x 4) */
+#define X38_DRB_MASK	0x3ff	/* bits 9:0 */
+#define X38_DRB_SHIFT 26	/* 64MiB grain */
+
+#define X38_C0ECCERRLOG 0x280	/* Channel 0 ECC Error Log (64b)
+				 *
+				 * 63:48 Error Column Address (ERRCOL)
+				 * 47:32 Error Row Address (ERRROW)
+				 * 31:29 Error Bank Address (ERRBANK)
+				 * 28:27 Error Rank Address (ERRRANK)
+				 * 26:24 reserved
+				 * 23:16 Error Syndrome (ERRSYND)
+				 * 15: 2 reserved
+				 *    1  Multiple Bit Error Status (MERRSTS)
+				 *    0  Correctable Error Status (CERRSTS)
+				 */
+#define X38_C1ECCERRLOG 0x680	/* Channel 1 ECC Error Log (64b) */
+#define X38_ECCERRLOG_CE	0x1
+#define X38_ECCERRLOG_UE	0x2
+#define X38_ECCERRLOG_RANK_BITS	0x18000000
+#define X38_ECCERRLOG_SYNDROME_BITS	0xff0000
+
+#define X38_CAPID0 0xe0	/* see P.94 of spec for details */
+
+static int x38_channel_num;
+
+static int how_many_channel(struct pci_dev *pdev)
+{
+	unsigned char capid0_8b; /* 8th byte of CAPID0 */
+
+	pci_read_config_byte(pdev, X38_CAPID0 + 8, &capid0_8b);
+	if (capid0_8b & 0x20) {	/* check DCD: Dual Channel Disable */
+		debugf0("In single channel mode.\n");
+		x38_channel_num = 1;
+	} else {
+		debugf0("In dual channel mode.\n");
+		x38_channel_num = 2;
+	}
+
+	return x38_channel_num;
+}
+
+static unsigned long eccerrlog_syndrome(u64 log)
+{
+	return (log & X38_ECCERRLOG_SYNDROME_BITS) >> 16;
+}
+
+static int eccerrlog_row(int channel, u64 log)
+{
+	return ((log & X38_ECCERRLOG_RANK_BITS) >> 27) |
+		(channel * X38_RANKS_PER_CHANNEL);
+}
+
+enum x38_chips {
+	X38 = 0,
+};
+
+struct x38_dev_info {
+	const char *ctl_name;
+};
+
+struct x38_error_info {
+	u16 errsts;
+	u16 errsts2;
+	u64 eccerrlog[X38_CHANNELS];
+};
+
+static const struct x38_dev_info x38_devs[] = {
+	[X38] = {
+		.ctl_name = "x38"},
+};
+
+static struct pci_dev *mci_pdev;
+static int x38_registered = 1;
+
+
+static void x38_clear_error_info(struct mem_ctl_info *mci)
+{
+	struct pci_dev *pdev;
+
+	pdev = to_pci_dev(mci->dev);
+
+	/*
+	 * Clear any error bits.
+	 * (Yes, we really clear bits by writing 1 to them.)
+	 */
+	pci_write_bits16(pdev, X38_ERRSTS, X38_ERRSTS_BITS,
+			 X38_ERRSTS_BITS);
+}
+
+static u64 x38_readq(const void __iomem *addr)
+{
+	return readl(addr) | (((u64)readl(addr + 4)) << 32);
+}
+
+static void x38_get_and_clear_error_info(struct mem_ctl_info *mci,
+				 struct x38_error_info *info)
+{
+	struct pci_dev *pdev;
+	void __iomem *window = mci->pvt_info;
+
+	pdev = to_pci_dev(mci->dev);
+
+	/*
+	 * This is a mess because there is no atomic way to read all the
+	 * registers at once and the registers can transition from CE being
+	 * overwritten by UE.
+	 */
+	pci_read_config_word(pdev, X38_ERRSTS, &info->errsts);
+	if (!(info->errsts & X38_ERRSTS_BITS))
+		return;
+
+	info->eccerrlog[0] = x38_readq(window + X38_C0ECCERRLOG);
+	if (x38_channel_num == 2)
+		info->eccerrlog[1] = x38_readq(window + X38_C1ECCERRLOG);
+
+	pci_read_config_word(pdev, X38_ERRSTS, &info->errsts2);
+
+	/*
+	 * If the error is the same for both reads then the first set
+	 * of reads is valid.  If there is a change then there is a CE
+	 * with no info and the second set of reads is valid and
+	 * should be UE info.
+	 */
+	if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) {
+		info->eccerrlog[0] = x38_readq(window + X38_C0ECCERRLOG);
+		if (x38_channel_num == 2)
+			info->eccerrlog[1] =
+				x38_readq(window + X38_C1ECCERRLOG);
+	}
+
+	x38_clear_error_info(mci);
+}
+
+static void x38_process_error_info(struct mem_ctl_info *mci,
+				struct x38_error_info *info)
+{
+	int channel;
+	u64 log;
+
+	if (!(info->errsts & X38_ERRSTS_BITS))
+		return;
+
+	if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) {
+		edac_mc_handle_ce_no_info(mci, "UE overwrote CE");
+		info->errsts = info->errsts2;
+	}
+
+	for (channel = 0; channel < x38_channel_num; channel++) {
+		log = info->eccerrlog[channel];
+		if (log & X38_ECCERRLOG_UE) {
+			edac_mc_handle_ue(mci, 0, 0,
+				eccerrlog_row(channel, log), "x38 UE");
+		} else if (log & X38_ECCERRLOG_CE) {
+			edac_mc_handle_ce(mci, 0, 0,
+				eccerrlog_syndrome(log),
+				eccerrlog_row(channel, log), 0, "x38 CE");
+		}
+	}
+}
+
+static void x38_check(struct mem_ctl_info *mci)
+{
+	struct x38_error_info info;
+
+	debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+	x38_get_and_clear_error_info(mci, &info);
+	x38_process_error_info(mci, &info);
+}
+
+
+void __iomem *x38_map_mchbar(struct pci_dev *pdev)
+{
+	union {
+		u64 mchbar;
+		struct {
+			u32 mchbar_low;
+			u32 mchbar_high;
+		};
+	} u;
+	void __iomem *window;
+
+	pci_read_config_dword(pdev, X38_MCHBAR_LOW, &u.mchbar_low);
+	pci_write_config_dword(pdev, X38_MCHBAR_LOW, u.mchbar_low | 0x1);
+	pci_read_config_dword(pdev, X38_MCHBAR_HIGH, &u.mchbar_high);
+	u.mchbar &= X38_MCHBAR_MASK;
+
+	if (u.mchbar != (resource_size_t)u.mchbar) {
+		printk(KERN_ERR
+			"x38: mmio space beyond accessible range (0x%llx)\n",
+			(unsigned long long)u.mchbar);
+		return NULL;
+	}
+
+	window = ioremap_nocache(u.mchbar, X38_MMR_WINDOW_SIZE);
+	if (!window)
+		printk(KERN_ERR "x38: cannot map mmio space at 0x%llx\n",
+			(unsigned long long)u.mchbar);
+
+	return window;
+}
+
+
+static void x38_get_drbs(void __iomem *window,
+			u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL])
+{
+	int i;
+
+	for (i = 0; i < X38_RANKS_PER_CHANNEL; i++) {
+		drbs[0][i] = readw(window + X38_C0DRB + 2*i) & X38_DRB_MASK;
+		drbs[1][i] = readw(window + X38_C1DRB + 2*i) & X38_DRB_MASK;
+	}
+}
+
+static bool x38_is_stacked(struct pci_dev *pdev,
+			u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL])
+{
+	u16 tom;
+
+	pci_read_config_word(pdev, X38_TOM, &tom);
+	tom &= X38_TOM_MASK;
+
+	return drbs[X38_CHANNELS - 1][X38_RANKS_PER_CHANNEL - 1] == tom;
+}
+
+static unsigned long drb_to_nr_pages(
+			u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL],
+			bool stacked, int channel, int rank)
+{
+	int n;
+
+	n = drbs[channel][rank];
+	if (rank > 0)
+		n -= drbs[channel][rank - 1];
+	if (stacked && (channel == 1) && drbs[channel][rank] ==
+				drbs[channel][X38_RANKS_PER_CHANNEL - 1]) {
+		n -= drbs[0][X38_RANKS_PER_CHANNEL - 1];
+	}
+
+	n <<= (X38_DRB_SHIFT - PAGE_SHIFT);
+	return n;
+}
+
+static int x38_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	int rc;
+	int i;
+	struct mem_ctl_info *mci = NULL;
+	unsigned long last_page;
+	u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL];
+	bool stacked;
+	void __iomem *window;
+
+	debugf0("MC: %s()\n", __func__);
+
+	window = x38_map_mchbar(pdev);
+	if (!window)
+		return -ENODEV;
+
+	x38_get_drbs(window, drbs);
+
+	how_many_channel(pdev);
+
+	/* FIXME: unconventional pvt_info usage */
+	mci = edac_mc_alloc(0, X38_RANKS, x38_channel_num, 0);
+	if (!mci)
+		return -ENOMEM;
+
+	debugf3("MC: %s(): init mci\n", __func__);
+
+	mci->dev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_DDR2;
+
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+
+	mci->mod_name = EDAC_MOD_STR;
+	mci->mod_ver = X38_REVISION;
+	mci->ctl_name = x38_devs[dev_idx].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->edac_check = x38_check;
+	mci->ctl_page_to_phys = NULL;
+	mci->pvt_info = window;
+
+	stacked = x38_is_stacked(pdev, drbs);
+
+	/*
+	 * The dram rank boundary (DRB) reg values are boundary addresses
+	 * for each DRAM rank with a granularity of 64MB.  DRB regs are
+	 * cumulative; the last one will contain the total memory
+	 * contained in all ranks.
+	 */
+	last_page = -1UL;
+	for (i = 0; i < mci->nr_csrows; i++) {
+		unsigned long nr_pages;
+		struct csrow_info *csrow = &mci->csrows[i];
+
+		nr_pages = drb_to_nr_pages(drbs, stacked,
+			i / X38_RANKS_PER_CHANNEL,
+			i % X38_RANKS_PER_CHANNEL);
+
+		if (nr_pages == 0) {
+			csrow->mtype = MEM_EMPTY;
+			continue;
+		}
+
+		csrow->first_page = last_page + 1;
+		last_page += nr_pages;
+		csrow->last_page = last_page;
+		csrow->nr_pages = nr_pages;
+
+		csrow->grain = nr_pages << PAGE_SHIFT;
+		csrow->mtype = MEM_DDR2;
+		csrow->dtype = DEV_UNKNOWN;
+		csrow->edac_mode = EDAC_UNKNOWN;
+	}
+
+	x38_clear_error_info(mci);
+
+	rc = -ENODEV;
+	if (edac_mc_add_mc(mci)) {
+		debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__);
+		goto fail;
+	}
+
+	/* get this far and it's successful */
+	debugf3("MC: %s(): success\n", __func__);
+	return 0;
+
+fail:
+	iounmap(window);
+	if (mci)
+		edac_mc_free(mci);
+
+	return rc;
+}
+
+static int __devinit x38_init_one(struct pci_dev *pdev,
+				const struct pci_device_id *ent)
+{
+	int rc;
+
+	debugf0("MC: %s()\n", __func__);
+
+	if (pci_enable_device(pdev) < 0)
+		return -EIO;
+
+	rc = x38_probe1(pdev, ent->driver_data);
+	if (!mci_pdev)
+		mci_pdev = pci_dev_get(pdev);
+
+	return rc;
+}
+
+static void __devexit x38_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+
+	debugf0("%s()\n", __func__);
+
+	mci = edac_mc_del_mc(&pdev->dev);
+	if (!mci)
+		return;
+
+	iounmap(mci->pvt_info);
+
+	edac_mc_free(mci);
+}
+
+static const struct pci_device_id x38_pci_tbl[] __devinitdata = {
+	{
+	 PCI_VEND_DEV(INTEL, X38_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+	 X38},
+	{
+	 0,
+	 }			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, x38_pci_tbl);
+
+static struct pci_driver x38_driver = {
+	.name = EDAC_MOD_STR,
+	.probe = x38_init_one,
+	.remove = __devexit_p(x38_remove_one),
+	.id_table = x38_pci_tbl,
+};
+
+static int __init x38_init(void)
+{
+	int pci_rc;
+
+	debugf3("MC: %s()\n", __func__);
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	pci_rc = pci_register_driver(&x38_driver);
+	if (pci_rc < 0)
+		goto fail0;
+
+	if (!mci_pdev) {
+		x38_registered = 0;
+		mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+					PCI_DEVICE_ID_INTEL_X38_HB, NULL);
+		if (!mci_pdev) {
+			debugf0("x38 pci_get_device fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+
+		pci_rc = x38_init_one(mci_pdev, x38_pci_tbl);
+		if (pci_rc < 0) {
+			debugf0("x38 init fail\n");
+			pci_rc = -ENODEV;
+			goto fail1;
+		}
+	}
+
+	return 0;
+
+fail1:
+	pci_unregister_driver(&x38_driver);
+
+fail0:
+	if (mci_pdev)
+		pci_dev_put(mci_pdev);
+
+	return pci_rc;
+}
+
+static void __exit x38_exit(void)
+{
+	debugf3("MC: %s()\n", __func__);
+
+	pci_unregister_driver(&x38_driver);
+	if (!x38_registered) {
+		x38_remove_one(mci_pdev);
+		pci_dev_put(mci_pdev);
+	}
+}
+
+module_init(x38_init);
+module_exit(x38_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cluster Computing, Inc. Hitoshi Mitake");
+MODULE_DESCRIPTION("MC support for Intel X38 memory hub controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 743e6f8cb20..1903e751565 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1263,6 +1263,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
diff --git a/drivers/hid/hid-dell.c b/drivers/hid/hid-dell.c
index 1a0d0dfc62f..f5474300b83 100644
--- a/drivers/hid/hid-dell.c
+++ b/drivers/hid/hid-dell.c
@@ -48,6 +48,7 @@ err_free:
 static const struct hid_device_id dell_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, dell_devices);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index a0d6a6cb184..5cc40429173 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -163,6 +163,9 @@
 
 #define USB_VENDOR_ID_GENERAL_TOUCH	0x0dfc
 
+#define USB_VENDOR_ID_GENERIC_13BA	0x13ba
+#define USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE	0x0017
+
 #define USB_VENDOR_ID_GLAB		0x06c2
 #define USB_DEVICE_ID_4_PHIDGETSERVO_30	0x0038
 #define USB_DEVICE_ID_1_PHIDGETSERVO_30	0x0039
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 42bdd83444c..18e5ddd722c 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/mm.h>
+#include <linux/mutex.h>
 #include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <asm/unaligned.h>
@@ -776,21 +777,10 @@ static int usbhid_start(struct hid_device *hid)
 	struct usb_interface *intf = to_usb_interface(hid->dev.parent);
 	struct usb_host_interface *interface = intf->cur_altsetting;
 	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usbhid_device *usbhid;
+	struct usbhid_device *usbhid = hid->driver_data;
 	unsigned int n, insize = 0;
 	int ret;
 
-	WARN_ON(hid->driver_data);
-
-	usbhid = kzalloc(sizeof(struct usbhid_device), GFP_KERNEL);
-	if (usbhid == NULL) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	hid->driver_data = usbhid;
-	usbhid->hid = hid;
-
 	usbhid->bufsize = HID_MIN_BUFFER_SIZE;
 	hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize);
 	hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize);
@@ -804,6 +794,7 @@ static int usbhid_start(struct hid_device *hid)
 	if (insize > HID_MAX_BUFFER_SIZE)
 		insize = HID_MAX_BUFFER_SIZE;
 
+	mutex_lock(&usbhid->setup);
 	if (hid_alloc_buffers(dev, hid)) {
 		ret = -ENOMEM;
 		goto fail;
@@ -888,6 +879,9 @@ static int usbhid_start(struct hid_device *hid)
 	usbhid_init_reports(hid);
 	hid_dump_device(hid);
 
+	set_bit(HID_STARTED, &usbhid->iofl);
+	mutex_unlock(&usbhid->setup);
+
 	return 0;
 
 fail:
@@ -895,8 +889,7 @@ fail:
 	usb_free_urb(usbhid->urbout);
 	usb_free_urb(usbhid->urbctrl);
 	hid_free_buffers(dev, hid);
-	kfree(usbhid);
-err:
+	mutex_unlock(&usbhid->setup);
 	return ret;
 }
 
@@ -907,6 +900,8 @@ static void usbhid_stop(struct hid_device *hid)
 	if (WARN_ON(!usbhid))
 		return;
 
+	mutex_lock(&usbhid->setup);
+	clear_bit(HID_STARTED, &usbhid->iofl);
 	spin_lock_irq(&usbhid->inlock);	/* Sync with error handler */
 	set_bit(HID_DISCONNECTED, &usbhid->iofl);
 	spin_unlock_irq(&usbhid->inlock);
@@ -931,8 +926,7 @@ static void usbhid_stop(struct hid_device *hid)
 	usb_free_urb(usbhid->urbout);
 
 	hid_free_buffers(hid_to_usb_dev(hid), hid);
-	kfree(usbhid);
-	hid->driver_data = NULL;
+	mutex_unlock(&usbhid->setup);
 }
 
 static struct hid_ll_driver usb_hid_driver = {
@@ -947,6 +941,7 @@ static struct hid_ll_driver usb_hid_driver = {
 static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
 	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usbhid_device *usbhid;
 	struct hid_device *hid;
 	size_t len;
 	int ret;
@@ -1000,14 +995,26 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0)
 		hid->uniq[0] = 0;
 
+	usbhid = kzalloc(sizeof(*usbhid), GFP_KERNEL);
+	if (usbhid == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	hid->driver_data = usbhid;
+	usbhid->hid = hid;
+	mutex_init(&usbhid->setup); /* needed on suspend/resume */
+
 	ret = hid_add_device(hid);
 	if (ret) {
 		if (ret != -ENODEV)
 			dev_err(&intf->dev, "can't add hid device: %d\n", ret);
-		goto err;
+		goto err_free;
 	}
 
 	return 0;
+err_free:
+	kfree(usbhid);
 err:
 	hid_destroy_device(hid);
 	return ret;
@@ -1016,11 +1023,14 @@ err:
 static void hid_disconnect(struct usb_interface *intf)
 {
 	struct hid_device *hid = usb_get_intfdata(intf);
+	struct usbhid_device *usbhid;
 
 	if (WARN_ON(!hid))
 		return;
 
+	usbhid = hid->driver_data;
 	hid_destroy_device(hid);
+	kfree(usbhid);
 }
 
 static int hid_suspend(struct usb_interface *intf, pm_message_t message)
@@ -1028,11 +1038,18 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message)
 	struct hid_device *hid = usb_get_intfdata (intf);
 	struct usbhid_device *usbhid = hid->driver_data;
 
+	mutex_lock(&usbhid->setup);
+	if (!test_bit(HID_STARTED, &usbhid->iofl)) {
+		mutex_unlock(&usbhid->setup);
+		return 0;
+	}
+
 	spin_lock_irq(&usbhid->inlock);	/* Sync with error handler */
 	set_bit(HID_SUSPENDED, &usbhid->iofl);
 	spin_unlock_irq(&usbhid->inlock);
-	del_timer(&usbhid->io_retry);
+	del_timer_sync(&usbhid->io_retry);
 	usb_kill_urb(usbhid->urbin);
+	mutex_unlock(&usbhid->setup);
 	dev_dbg(&intf->dev, "suspend\n");
 	return 0;
 }
@@ -1043,9 +1060,16 @@ static int hid_resume(struct usb_interface *intf)
 	struct usbhid_device *usbhid = hid->driver_data;
 	int status;
 
+	mutex_lock(&usbhid->setup);
+	if (!test_bit(HID_STARTED, &usbhid->iofl)) {
+		mutex_unlock(&usbhid->setup);
+		return 0;
+	}
+
 	clear_bit(HID_SUSPENDED, &usbhid->iofl);
 	usbhid->retry_delay = 0;
 	status = hid_start_in(hid);
+	mutex_unlock(&usbhid->setup);
 	dev_dbg(&intf->dev, "resume status %d\n", status);
 	return status;
 }
diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h
index abedb13c623..55973ff5400 100644
--- a/drivers/hid/usbhid/usbhid.h
+++ b/drivers/hid/usbhid/usbhid.h
@@ -27,6 +27,7 @@
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/list.h>
+#include <linux/mutex.h>
 #include <linux/timer.h>
 #include <linux/wait.h>
 #include <linux/workqueue.h>
@@ -73,6 +74,7 @@ struct usbhid_device {
 	dma_addr_t outbuf_dma;                                          /* Output buffer dma */
 	spinlock_t outlock;                                             /* Output fifo spinlock */
 
+	struct mutex setup;
 	unsigned long iofl;                                             /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
 	struct timer_list io_retry;                                     /* Retry timer */
 	unsigned long stop_retry;                                       /* Time to give up, in jiffies */
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index c772e02c280..1fac4e23313 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -507,7 +507,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int
 	unsigned long timeout;
 	int ret;
 
-	if (!readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN)
+	if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN))
 		return -EIO;
 
 	ret = s3c24xx_i2c_set_master(i2c);
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index c3022a02344..e4c98539c51 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -81,6 +81,7 @@ static struct i2c_algo_bit_data scx200_i2c_data = {
 
 static struct i2c_adapter scx200_i2c_ops = {
 	.owner		   = THIS_MODULE,
+	.class             = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.id		   = I2C_HW_B_SCX200,
 	.algo_data	   = &scx200_i2c_data,
 	.name	= "NatSemi SCx200 I2C",
diff --git a/drivers/leds/leds-da903x.c b/drivers/leds/leds-da903x.c
index 2768c69257f..1f3cc512eff 100644
--- a/drivers/leds/leds-da903x.c
+++ b/drivers/leds/leds-da903x.c
@@ -58,7 +58,7 @@ static void da903x_led_work(struct work_struct *work)
 		offset = DA9030_LED_OFFSET(led->id);
 		val = led->flags & ~0x87;
 		val |= (led->new_brightness) ? 0x80 : 0; /* EN bit */
-		val |= (led->new_brightness >> 5) & 0x7; /* PWM<2:0> */
+		val |= (0x7 - (led->new_brightness >> 5)) & 0x7; /* PWM<2:0> */
 		da903x_write(led->master, DA9030_LED1_CONTROL + offset, val);
 		break;
 	case DA9030_ID_VIBRA:
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 92dcc06832a..9d7b53ed75b 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -656,9 +656,10 @@ static void do_failures(struct mirror_set *ms, struct bio_list *failures)
 		return;
 
 	if (!ms->log_failure) {
-		while ((bio = bio_list_pop(failures)))
+		while ((bio = bio_list_pop(failures))) {
 			ms->in_sync = 0;
 			dm_rh_mark_nosync(ms->rh, bio, bio->bi_size, 0);
+		}
 		return;
 	}
 
diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index b2d9d1ac28a..6c96db26b87 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -229,19 +229,21 @@ static void __insert_origin(struct origin *o)
  */
 static int register_snapshot(struct dm_snapshot *snap)
 {
-	struct origin *o;
+	struct origin *o, *new_o;
 	struct block_device *bdev = snap->origin->bdev;
 
+	new_o = kmalloc(sizeof(*new_o), GFP_KERNEL);
+	if (!new_o)
+		return -ENOMEM;
+
 	down_write(&_origins_lock);
 	o = __lookup_origin(bdev);
 
-	if (!o) {
+	if (o)
+		kfree(new_o);
+	else {
 		/* New origin */
-		o = kmalloc(sizeof(*o), GFP_KERNEL);
-		if (!o) {
-			up_write(&_origins_lock);
-			return -ENOMEM;
-		}
+		o = new_o;
 
 		/* Initialise the struct */
 		INIT_LIST_HEAD(&o->snapshots);
@@ -368,6 +370,7 @@ static struct dm_snap_pending_exception *alloc_pending_exception(struct dm_snaps
 	struct dm_snap_pending_exception *pe = mempool_alloc(s->pending_pool,
 							     GFP_NOIO);
 
+	atomic_inc(&s->pending_exceptions_count);
 	pe->snap = s;
 
 	return pe;
@@ -375,7 +378,11 @@ static struct dm_snap_pending_exception *alloc_pending_exception(struct dm_snaps
 
 static void free_pending_exception(struct dm_snap_pending_exception *pe)
 {
-	mempool_free(pe, pe->snap->pending_pool);
+	struct dm_snapshot *s = pe->snap;
+
+	mempool_free(pe, s->pending_pool);
+	smp_mb__before_atomic_dec();
+	atomic_dec(&s->pending_exceptions_count);
 }
 
 static void insert_completed_exception(struct dm_snapshot *s,
@@ -600,6 +607,7 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 
 	s->valid = 1;
 	s->active = 0;
+	atomic_set(&s->pending_exceptions_count, 0);
 	init_rwsem(&s->lock);
 	spin_lock_init(&s->pe_lock);
 	s->ti = ti;
@@ -726,6 +734,14 @@ static void snapshot_dtr(struct dm_target *ti)
 	/* After this returns there can be no new kcopyd jobs. */
 	unregister_snapshot(s);
 
+	while (atomic_read(&s->pending_exceptions_count))
+		yield();
+	/*
+	 * Ensure instructions in mempool_destroy aren't reordered
+	 * before atomic_read.
+	 */
+	smp_mb();
+
 #ifdef CONFIG_DM_DEBUG
 	for (i = 0; i < DM_TRACKED_CHUNK_HASH_SIZE; i++)
 		BUG_ON(!hlist_empty(&s->tracked_chunk_hash[i]));
diff --git a/drivers/md/dm-snap.h b/drivers/md/dm-snap.h
index f07315fe236..99c0106ede2 100644
--- a/drivers/md/dm-snap.h
+++ b/drivers/md/dm-snap.h
@@ -160,6 +160,8 @@ struct dm_snapshot {
 
 	mempool_t *pending_pool;
 
+	atomic_t pending_exceptions_count;
+
 	struct exception_table pending;
 	struct exception_table complete;
 
diff --git a/drivers/md/md.c b/drivers/md/md.c
index b4162f6f1b7..9abf6ed1653 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3884,6 +3884,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 	if (mode == 0) {
 		mdk_rdev_t *rdev;
 		struct list_head *tmp;
+		struct block_device *bdev;
 
 		printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
 
@@ -3940,6 +3941,12 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 		mddev->degraded = 0;
 		mddev->barriers_work = 0;
 		mddev->safemode = 0;
+		bdev = bdget_disk(mddev->gendisk, 0);
+		if (bdev) {
+			blkdev_ioctl(bdev, 0, BLKRRPART, 0);
+			bdput(bdev);
+		}
+		kobject_uevent(&disk_to_dev(mddev->gendisk)->kobj, KOBJ_CHANGE);
 
 	} else if (mddev->pers)
 		printk(KERN_INFO "md: %s switched to read-only mode.\n",
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 11a617ab424..84bdc2ee69e 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -567,8 +567,8 @@ static void i2o_block_biosparam(unsigned long capacity, unsigned short *cyls,
 
 /**
  *	i2o_block_open - Open the block device
- *	@inode: inode for block device being opened
- *	@file: file to open
+ *	@bdev: block device being opened
+ *	@mode: file open mode
  *
  *	Power up the device, mount and lock the media. This function is called,
  *	if the block device is opened for access.
@@ -596,8 +596,8 @@ static int i2o_block_open(struct block_device *bdev, fmode_t mode)
 
 /**
  *	i2o_block_release - Release the I2O block device
- *	@inode: inode for block device being released
- *	@file: file to close
+ *	@disk: gendisk device being released
+ *	@mode: file open mode
  *
  *	Unlock and unmount the media, and power down the device. Gets called if
  *	the block device is closed.
@@ -643,8 +643,8 @@ static int i2o_block_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 
 /**
  *	i2o_block_ioctl - Issue device specific ioctl calls.
- *	@inode: inode for block device ioctl
- *	@file: file for ioctl
+ *	@bdev: block device being opened
+ *	@mode: file open mode
  *	@cmd: ioctl command
  *	@arg: arg
  *
diff --git a/drivers/misc/hdpuftrs/hdpu_nexus.c b/drivers/misc/hdpuftrs/hdpu_nexus.c
index 08e26beefe6..ce39fa54949 100644
--- a/drivers/misc/hdpuftrs/hdpu_nexus.c
+++ b/drivers/misc/hdpuftrs/hdpu_nexus.c
@@ -113,7 +113,6 @@ static int hdpu_nexus_probe(struct platform_device *pdev)
 	if (!hdpu_chassis_id)
 		printk(KERN_WARNING "sky_nexus: "
 		       "Unable to create proc dir entry: sky_chassis_id\n");
-	}
 
 	return 0;
 }
diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile
index 35ce2857807..4fc40d8e1bc 100644
--- a/drivers/misc/sgi-xp/Makefile
+++ b/drivers/misc/sgi-xp/Makefile
@@ -5,14 +5,14 @@
 obj-$(CONFIG_SGI_XP)		+= xp.o
 xp-y				:= xp_main.o
 xp-$(CONFIG_IA64_SGI_SN2)	+= xp_sn2.o xp_nofault.o
-xp-$(CONFIG_IA64_GENERIC)	+= xp_sn2.o xp_nofault.o xp_uv.o
+xp-$(CONFIG_IA64_GENERIC)	+= xp_sn2.o xp_nofault.o
 xp-$(CONFIG_IA64_SGI_UV)	+= xp_uv.o
 xp-$(CONFIG_X86_64)		+= xp_uv.o
 
 obj-$(CONFIG_SGI_XP)		+= xpc.o
 xpc-y				:= xpc_main.o xpc_channel.o xpc_partition.o
 xpc-$(CONFIG_IA64_SGI_SN2)	+= xpc_sn2.o
-xpc-$(CONFIG_IA64_GENERIC)	+= xpc_sn2.o xpc_uv.o
+xpc-$(CONFIG_IA64_GENERIC)	+= xpc_sn2.o
 xpc-$(CONFIG_IA64_SGI_UV) 	+= xpc_uv.o
 xpc-$(CONFIG_X86_64)		+= xpc_uv.o
 
diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h
index 859a5281c61..ed1722e5004 100644
--- a/drivers/misc/sgi-xp/xp.h
+++ b/drivers/misc/sgi-xp/xp.h
@@ -19,7 +19,11 @@
 #include <asm/system.h>
 #include <asm/sn/arch.h>	/* defines is_shub1() and is_shub2() */
 #define is_shub()	ia64_platform_is("sn2")
+#ifdef CONFIG_IA64_SGI_UV
 #define is_uv()		ia64_platform_is("uv")
+#else
+#define is_uv()		0
+#endif
 #endif
 #ifdef CONFIG_X86_64
 #include <asm/genapic.h>
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index 46325fc8481..e8d5cfbd32c 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -1104,7 +1104,7 @@ xpc_do_exit(enum xp_retval reason)
 
 	if (is_shub())
 		xpc_exit_sn2();
-	else
+	else if (is_uv())
 		xpc_exit_uv();
 }
 
@@ -1363,7 +1363,7 @@ out_2:
 out_1:
 	if (is_shub())
 		xpc_exit_sn2();
-	else
+	else if (is_uv())
 		xpc_exit_uv();
 	return ret;
 }
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
index 5a97d3a9d74..f483c4221f7 100644
--- a/drivers/misc/sony-laptop.c
+++ b/drivers/misc/sony-laptop.c
@@ -2315,8 +2315,10 @@ end:
  */
 static int sony_pic_disable(struct acpi_device *device)
 {
-	if (ACPI_FAILURE(acpi_evaluate_object(device->handle,
-			"_DIS", NULL, NULL)))
+	acpi_status ret = acpi_evaluate_object(device->handle, "_DIS", NULL,
+					       NULL);
+
+	if (ACPI_FAILURE(ret) && ret != AE_NOT_FOUND)
 		return -ENXIO;
 
 	dprintk("Device disabled\n");
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 696cf3647ce..2fadf323c69 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -391,6 +391,7 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
 static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 {
 	struct mmci_host *host = mmc_priv(mmc);
+	unsigned long flags;
 
 	WARN_ON(host->mrq != NULL);
 
@@ -402,7 +403,7 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		return;
 	}
 
-	spin_lock_irq(&host->lock);
+	spin_lock_irqsave(&host->lock, flags);
 
 	host->mrq = mrq;
 
@@ -411,7 +412,7 @@ static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 
 	mmci_start_command(host, mrq->cmd, 0);
 
-	spin_unlock_irq(&host->lock);
+	spin_unlock_irqrestore(&host->lock, flags);
 }
 
 static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index c54967f7942..ba1be0b3a8c 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -833,12 +833,14 @@ static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
 
 	} while(intr0 & RINT0);
 
-	/* Receive descriptor is empty now */
-	spin_lock_irqsave(&lp->lock, flags);
-	__netif_rx_complete(dev, napi);
-	writel(VAL0|RINTEN0, mmio + INTEN0);
-	writel(VAL2 | RDMD0, mmio + CMD0);
-	spin_unlock_irqrestore(&lp->lock, flags);
+	if (rx_pkt_limit > 0) {
+		/* Receive descriptor is empty now */
+		spin_lock_irqsave(&lp->lock, flags);
+		__netif_rx_complete(dev, napi);
+		writel(VAL0|RINTEN0, mmio + INTEN0);
+		writel(VAL2 | RDMD0, mmio + CMD0);
+		spin_unlock_irqrestore(&lp->lock, flags);
+	}
 
 rx_not_empty:
 	return num_rx_pkt;
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 82dd1a891ce..002d918fb4c 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0094"
+#define DRV_VERSION	"EHEA_0095"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1
diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c
index 9b61dc9865d..9d006878f04 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ehea/ehea_qmr.c
@@ -632,10 +632,13 @@ static void ehea_rebuild_busmap(void)
 	}
 }
 
-static int ehea_update_busmap(unsigned long pfn, unsigned long pgnum, int add)
+static int ehea_update_busmap(unsigned long pfn, unsigned long nr_pages, int add)
 {
 	unsigned long i, start_section, end_section;
 
+	if (!nr_pages)
+		return 0;
+
 	if (!ehea_bmap) {
 		ehea_bmap = kzalloc(sizeof(struct ehea_bmap), GFP_KERNEL);
 		if (!ehea_bmap)
@@ -643,7 +646,7 @@ static int ehea_update_busmap(unsigned long pfn, unsigned long pgnum, int add)
 	}
 
 	start_section = (pfn * PAGE_SIZE) / EHEA_SECTSIZE;
-	end_section = start_section + ((pgnum * PAGE_SIZE) / EHEA_SECTSIZE);
+	end_section = start_section + ((nr_pages * PAGE_SIZE) / EHEA_SECTSIZE);
 	/* Mark entries as valid or invalid only; address is assigned later */
 	for (i = start_section; i < end_section; i++) {
 		u64 flag;
@@ -692,10 +695,54 @@ int ehea_rem_sect_bmap(unsigned long pfn, unsigned long nr_pages)
 	return ret;
 }
 
-static int ehea_create_busmap_callback(unsigned long pfn,
-				       unsigned long nr_pages, void *arg)
+static int ehea_is_hugepage(unsigned long pfn)
+{
+	int page_order;
+
+	if (pfn & EHEA_HUGEPAGE_PFN_MASK)
+		return 0;
+
+	page_order = compound_order(pfn_to_page(pfn));
+	if (page_order + PAGE_SHIFT != EHEA_HUGEPAGESHIFT)
+		return 0;
+
+	return 1;
+}
+
+static int ehea_create_busmap_callback(unsigned long initial_pfn,
+				       unsigned long total_nr_pages, void *arg)
 {
-	return ehea_update_busmap(pfn, nr_pages, EHEA_BUSMAP_ADD_SECT);
+	int ret;
+	unsigned long pfn, start_pfn, end_pfn, nr_pages;
+
+	if ((total_nr_pages * PAGE_SIZE) < EHEA_HUGEPAGE_SIZE)
+		return ehea_update_busmap(initial_pfn, total_nr_pages,
+					  EHEA_BUSMAP_ADD_SECT);
+
+	/* Given chunk is >= 16GB -> check for hugepages */
+	start_pfn = initial_pfn;
+	end_pfn = initial_pfn + total_nr_pages;
+	pfn = start_pfn;
+
+	while (pfn < end_pfn) {
+		if (ehea_is_hugepage(pfn)) {
+			/* Add mem found in front of the hugepage */
+			nr_pages = pfn - start_pfn;
+			ret = ehea_update_busmap(start_pfn, nr_pages,
+						 EHEA_BUSMAP_ADD_SECT);
+			if (ret)
+				return ret;
+
+			/* Skip the hugepage */
+			pfn += (EHEA_HUGEPAGE_SIZE / PAGE_SIZE);
+			start_pfn = pfn;
+		} else
+			pfn += (EHEA_SECTSIZE / PAGE_SIZE);
+	}
+
+	/* Add mem found behind the hugepage(s)  */
+	nr_pages = pfn - start_pfn;
+	return ehea_update_busmap(start_pfn, nr_pages, EHEA_BUSMAP_ADD_SECT);
 }
 
 int ehea_create_busmap(void)
diff --git a/drivers/net/ehea/ehea_qmr.h b/drivers/net/ehea/ehea_qmr.h
index 1e58dc06b7d..0817c1e74a1 100644
--- a/drivers/net/ehea/ehea_qmr.h
+++ b/drivers/net/ehea/ehea_qmr.h
@@ -40,6 +40,9 @@
 #define EHEA_PAGESIZE          (1UL << EHEA_PAGESHIFT)
 #define EHEA_SECTSIZE          (1UL << 24)
 #define EHEA_PAGES_PER_SECTION (EHEA_SECTSIZE >> EHEA_PAGESHIFT)
+#define EHEA_HUGEPAGESHIFT     34
+#define EHEA_HUGEPAGE_SIZE     (1UL << EHEA_HUGEPAGESHIFT)
+#define EHEA_HUGEPAGE_PFN_MASK ((EHEA_HUGEPAGE_SIZE - 1) >> PAGE_SHIFT)
 
 #if ((1UL << SECTION_SIZE_BITS) < EHEA_SECTSIZE)
 #error eHEA module cannot work if kernel sectionsize < ehea sectionsize
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 2ee2622258f..901212aa37c 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -2605,7 +2605,7 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 		    of_device_is_compatible(np, "ibm,emac-440gr"))
 			dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
 		if (of_device_is_compatible(np, "ibm,emac-405ez")) {
-#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CONTROL
+#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL
 			dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x;
 #else
 			printk(KERN_ERR "%s: Flow control not disabled!\n",
diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c
index 1b0eebf84f7..4b9794e97a7 100644
--- a/drivers/net/mlx4/en_main.c
+++ b/drivers/net/mlx4/en_main.c
@@ -35,7 +35,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/netdevice.h>
-#include <linux/cpumask.h>
 
 #include <linux/mlx4/driver.h>
 #include <linux/mlx4/device.h>
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index be09fdb79cb..cee199ceba2 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -360,9 +360,9 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 #define QUERY_PORT_ETH_MTU_OFFSET		0x02
 #define QUERY_PORT_WIDTH_OFFSET			0x06
 #define QUERY_PORT_MAX_GID_PKEY_OFFSET		0x07
-#define QUERY_PORT_MAC_OFFSET			0x08
 #define QUERY_PORT_MAX_MACVLAN_OFFSET		0x0a
 #define QUERY_PORT_MAX_VL_OFFSET		0x0b
+#define QUERY_PORT_MAC_OFFSET			0x10
 
 		for (i = 1; i <= dev_cap->num_ports; ++i) {
 			err = mlx4_cmd_box(dev, 0, mailbox->dma, i, 0, MLX4_CMD_QUERY_PORT,
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 8e46a513a25..c91852f49a4 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -420,9 +420,13 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 	/* Allocate Tx/Rx descriptor memory */
 	db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) *
 			DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
+	if (!db->desc_pool_ptr)
+		goto err_out_res;
 
 	db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC *
 			TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
+	if (!db->buf_pool_ptr)
+		goto err_out_free_desc;
 
 	db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
 	db->first_tx_desc_dma = db->desc_pool_dma_ptr;
@@ -469,7 +473,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 
 	err = register_netdev (dev);
 	if (err)
-		goto err_out_res;
+		goto err_out_free_buf;
 
 	printk(KERN_INFO "%s: Davicom DM%04lx at pci%s, "
 	       "%s, irq %d.\n",
@@ -483,6 +487,12 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 
 	return 0;
 
+err_out_free_buf:
+	pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+			    db->buf_pool_ptr, db->buf_pool_dma_ptr);
+err_out_free_desc:
+	pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
+			    db->desc_pool_ptr, db->desc_pool_dma_ptr);
 err_out_res:
 	pci_release_regions(pdev);
 err_out_disable:
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 78df2be8a72..db3377dae9d 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -396,6 +396,20 @@ static void dm9601_set_multicast(struct net_device *net)
 	dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl);
 }
 
+static int dm9601_set_mac_address(struct net_device *net, void *p)
+{
+	struct sockaddr *addr = p;
+	struct usbnet *dev = netdev_priv(net);
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
+	memcpy(net->dev_addr, addr->sa_data, net->addr_len);
+	dm_write_async(dev, DM_PHY_ADDR, net->addr_len, net->dev_addr);
+
+	return 0;
+}
+
 static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret;
@@ -406,6 +420,7 @@ static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	dev->net->do_ioctl = dm9601_ioctl;
 	dev->net->set_multicast_list = dm9601_set_multicast;
+	dev->net->set_mac_address = dm9601_set_mac_address;
 	dev->net->ethtool_ops = &dm9601_ethtool_ops;
 	dev->net->hard_header_len += DM_TX_OVERHEAD;
 	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 2dced383bcf..3590ea5a902 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -521,7 +521,7 @@ static void __devexit velocity_remove1(struct pci_dev *pdev)
  *	we don't duplicate code for each option.
  */
 
-static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, char *devname)
+static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, const char *devname)
 {
 	if (val == -1)
 		*opt = def;
@@ -550,7 +550,7 @@ static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max,
  *	we don't duplicate code for each option.
  */
 
-static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 flag, char *name, char *devname)
+static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 flag, char *name, const char *devname)
 {
 	(*opt) &= (~flag);
 	if (val == -1)
@@ -576,7 +576,7 @@ static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 fla
  *	for the current device
  */
 
-static void __devinit velocity_get_options(struct velocity_opt *opts, int index, char *devname)
+static void __devinit velocity_get_options(struct velocity_opt *opts, int index, const char *devname)
 {
 
 	velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname);
@@ -863,6 +863,7 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi
 	static int first = 1;
 	struct net_device *dev;
 	int i;
+	const char *drv_string;
 	const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data];
 	struct velocity_info *vptr;
 	struct mac_regs __iomem * regs;
@@ -935,7 +936,9 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi
 		dev->dev_addr[i] = readb(&regs->PAR[i]);
 
 
-	velocity_get_options(&vptr->options, velocity_nics, dev->name);
+	drv_string = dev_driver_string(&pdev->dev);
+
+	velocity_get_options(&vptr->options, velocity_nics, drv_string);
 
 	/*
 	 *	Mask out the options cannot be set to the chip
diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c
index 327d58589e1..6e92f7b44b1 100644
--- a/drivers/net/wan/syncppp.c
+++ b/drivers/net/wan/syncppp.c
@@ -756,10 +756,11 @@ static void sppp_cisco_input (struct sppp *sp, struct sk_buff *skb)
 	case CISCO_ADDR_REQ:
 		/* Stolen from net/ipv4/devinet.c -- SIOCGIFADDR ioctl */
 		{
-		struct in_device *in_dev;
-		struct in_ifaddr *ifa;
 		__be32 addr = 0, mask = htonl(~0U); /* FIXME: is the mask correct? */
 #ifdef CONFIG_INET
+		struct in_device *in_dev;
+		struct in_ifaddr *ifa;
+
 		rcu_read_lock();
 		if ((in_dev = __in_dev_get_rcu(dev)) != NULL)
 		{
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 0f1d6bdd51a..cfd4d052d66 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -661,8 +661,7 @@ ath5k_pci_resume(struct pci_dev *pdev)
 {
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath5k_softc *sc = hw->priv;
-	struct ath5k_hw *ah = sc->ah;
-	int i, err;
+	int err;
 
 	pci_restore_state(pdev);
 
@@ -688,16 +687,6 @@ ath5k_pci_resume(struct pci_dev *pdev)
 		goto err_irq;
 	ath5k_led_enable(sc);
 
-	/*
-	 * Reset the key cache since some parts do not
-	 * reset the contents on initial power up or resume.
-	 *
-	 * FIXME: This may need to be revisited when mac80211 becomes
-	 *        aware of suspend/resume.
-	 */
-	for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
-		ath5k_hw_reset_key(ah, i);
-
 	return 0;
 err_irq:
 	free_irq(pdev->irq, sc);
@@ -718,7 +707,6 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	struct ath5k_softc *sc = hw->priv;
 	struct ath5k_hw *ah = sc->ah;
 	u8 mac[ETH_ALEN];
-	unsigned int i;
 	int ret;
 
 	ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
@@ -737,13 +725,6 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 		__set_bit(ATH_STAT_MRRETRY, sc->status);
 
 	/*
-	 * Reset the key cache since some parts do not
-	 * reset the contents on initial power up.
-	 */
-	for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
-		ath5k_hw_reset_key(ah, i);
-
-	/*
 	 * Collect the channel list.  The 802.11 layer
 	 * is resposible for filtering this list based
 	 * on settings like the phy mode and regulatory
@@ -2202,7 +2183,8 @@ ath5k_beacon_config(struct ath5k_softc *sc)
 static int
 ath5k_init(struct ath5k_softc *sc, bool is_resume)
 {
-	int ret;
+	struct ath5k_hw *ah = sc->ah;
+	int ret, i;
 
 	mutex_lock(&sc->lock);
 
@@ -2235,10 +2217,17 @@ ath5k_init(struct ath5k_softc *sc, bool is_resume)
 	if (ret)
 		goto done;
 
+	/*
+	 * Reset the key cache since some parts do not reset the
+	 * contents on initial power up or resume from suspend.
+	 */
+	for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
+		ath5k_hw_reset_key(ah, i);
+
 	__set_bit(ATH_STAT_STARTED, sc->status);
 
 	/* Set ack to be sent at low bit-rates */
-	ath5k_hw_set_ack_bitrate_high(sc->ah, false);
+	ath5k_hw_set_ack_bitrate_high(ah, false);
 
 	mod_timer(&sc->calib_tim, round_jiffies(jiffies +
 			msecs_to_jiffies(ath5k_calinterval * 1000)));
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 2d022f83774..827ca0384a4 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -319,7 +319,7 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 	void *tmp;
 	int err;
 	u8 *end = (u8 *)eeprom + len;
-	u16 synth;
+	u16 synth = 0;
 	DECLARE_MAC_BUF(mac);
 
 	wrap = (struct eeprom_pda_wrap *) eeprom;
@@ -422,7 +422,8 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 		entry = (void *)entry + (entry_len + 1)*2;
 	}
 
-	if (!priv->iq_autocal || !priv->output_limit || !priv->curve_data) {
+	if (!synth || !priv->iq_autocal || !priv->output_limit ||
+	    !priv->curve_data) {
 		printk(KERN_ERR "p54: not all required entries found in eeprom!\n");
 		err = -EINVAL;
 		goto err;
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index 1c2a02a741a..88b3cad8b65 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -346,68 +346,6 @@ static void p54p_tx(struct ieee80211_hw *dev, struct p54_control_hdr *data,
 		printk(KERN_INFO "%s: tx overflow.\n", wiphy_name(dev->wiphy));
 }
 
-static int p54p_open(struct ieee80211_hw *dev)
-{
-	struct p54p_priv *priv = dev->priv;
-	int err;
-
-	init_completion(&priv->boot_comp);
-	err = request_irq(priv->pdev->irq, &p54p_interrupt,
-			  IRQF_SHARED, "p54pci", dev);
-	if (err) {
-		printk(KERN_ERR "%s: failed to register IRQ handler\n",
-		       wiphy_name(dev->wiphy));
-		return err;
-	}
-
-	memset(priv->ring_control, 0, sizeof(*priv->ring_control));
-	err = p54p_upload_firmware(dev);
-	if (err) {
-		free_irq(priv->pdev->irq, dev);
-		return err;
-	}
-	priv->rx_idx_data = priv->tx_idx_data = 0;
-	priv->rx_idx_mgmt = priv->tx_idx_mgmt = 0;
-
-	p54p_refill_rx_ring(dev, 0, priv->ring_control->rx_data,
-		ARRAY_SIZE(priv->ring_control->rx_data), priv->rx_buf_data);
-
-	p54p_refill_rx_ring(dev, 2, priv->ring_control->rx_mgmt,
-		ARRAY_SIZE(priv->ring_control->rx_mgmt), priv->rx_buf_mgmt);
-
-	P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma));
-	P54P_READ(ring_control_base);
-	wmb();
-	udelay(10);
-
-	P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT));
-	P54P_READ(int_enable);
-	wmb();
-	udelay(10);
-
-	P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
-	P54P_READ(dev_int);
-
-	if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
-		printk(KERN_ERR "%s: Cannot boot firmware!\n",
-		       wiphy_name(dev->wiphy));
-		free_irq(priv->pdev->irq, dev);
-		return -ETIMEDOUT;
-	}
-
-	P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE));
-	P54P_READ(int_enable);
-	wmb();
-	udelay(10);
-
-	P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
-	P54P_READ(dev_int);
-	wmb();
-	udelay(10);
-
-	return 0;
-}
-
 static void p54p_stop(struct ieee80211_hw *dev)
 {
 	struct p54p_priv *priv = dev->priv;
@@ -474,6 +412,68 @@ static void p54p_stop(struct ieee80211_hw *dev)
 	memset(ring_control, 0, sizeof(*ring_control));
 }
 
+static int p54p_open(struct ieee80211_hw *dev)
+{
+	struct p54p_priv *priv = dev->priv;
+	int err;
+
+	init_completion(&priv->boot_comp);
+	err = request_irq(priv->pdev->irq, &p54p_interrupt,
+			  IRQF_SHARED, "p54pci", dev);
+	if (err) {
+		printk(KERN_ERR "%s: failed to register IRQ handler\n",
+		       wiphy_name(dev->wiphy));
+		return err;
+	}
+
+	memset(priv->ring_control, 0, sizeof(*priv->ring_control));
+	err = p54p_upload_firmware(dev);
+	if (err) {
+		free_irq(priv->pdev->irq, dev);
+		return err;
+	}
+	priv->rx_idx_data = priv->tx_idx_data = 0;
+	priv->rx_idx_mgmt = priv->tx_idx_mgmt = 0;
+
+	p54p_refill_rx_ring(dev, 0, priv->ring_control->rx_data,
+		ARRAY_SIZE(priv->ring_control->rx_data), priv->rx_buf_data);
+
+	p54p_refill_rx_ring(dev, 2, priv->ring_control->rx_mgmt,
+		ARRAY_SIZE(priv->ring_control->rx_mgmt), priv->rx_buf_mgmt);
+
+	P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma));
+	P54P_READ(ring_control_base);
+	wmb();
+	udelay(10);
+
+	P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT));
+	P54P_READ(int_enable);
+	wmb();
+	udelay(10);
+
+	P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
+	P54P_READ(dev_int);
+
+	if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
+		printk(KERN_ERR "%s: Cannot boot firmware!\n",
+		       wiphy_name(dev->wiphy));
+		p54p_stop(dev);
+		return -ETIMEDOUT;
+	}
+
+	P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE));
+	P54P_READ(int_enable);
+	wmb();
+	udelay(10);
+
+	P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
+	P54P_READ(dev_int);
+	wmb();
+	udelay(10);
+
+	return 0;
+}
+
 static int __devinit p54p_probe(struct pci_dev *pdev,
 				const struct pci_device_id *id)
 {
@@ -556,11 +556,13 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
 	spin_lock_init(&priv->lock);
 	tasklet_init(&priv->rx_tasklet, p54p_rx_tasklet, (unsigned long)dev);
 
-	p54p_open(dev);
+	err = p54p_open(dev);
+	if (err)
+		goto err_free_common;
 	err = p54_read_eeprom(dev);
 	p54p_stop(dev);
 	if (err)
-		goto err_free_desc;
+		goto err_free_common;
 
 	err = ieee80211_register_hw(dev);
 	if (err) {
@@ -573,8 +575,6 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
 
  err_free_common:
 	p54_free_common(dev);
-
- err_free_desc:
 	pci_free_consistent(pdev, sizeof(*priv->ring_control),
 			    priv->ring_control, priv->ring_control_dma);
 
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index b1899e9c1f6..0cd5fbc7f2c 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -112,7 +112,7 @@ static int parport_probe(struct pcmcia_device *link)
 
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 96cf8ecd04c..bbf66ea8fd8 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -43,20 +43,6 @@ static void __devinit quirk_mellanox_tavor(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor);
 
-/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
-int forbid_dac __read_mostly;
-EXPORT_SYMBOL(forbid_dac);
-
-static __devinit void via_no_dac(struct pci_dev *dev)
-{
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
-		dev_info(&dev->dev,
-			"VIA PCI bridge detected. Disabling DAC.\n");
-		forbid_dac = 1;
-	}
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
-
 /* Deal with broken BIOS'es that neglect to enable passive release,
    which can cause problems in combination with the 82441FX/PPro MTRRs */
 static void quirk_passive_release(struct pci_dev *dev)
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index afea2b2558b..76d4a98f095 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -693,8 +693,9 @@ int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req)
 	type = 0;
 	if (s->functions > 1)		/* All of this ought to be handled higher up */
 		type = IRQF_SHARED;
-	if (req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)
+	else if (req->Attributes & IRQ_TYPE_DYNAMIC_SHARING)
 		type = IRQF_SHARED;
+	else printk(KERN_WARNING "pcmcia: Driver needs updating to support IRQ sharing.\n");
 
 #ifdef CONFIG_PCMCIA_PROBE
 
diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index 3688e339db8..773b29cec8b 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -79,6 +79,11 @@ struct da903x_regulator_info {
 	int	enable_bit;
 };
 
+static inline struct device *to_da903x_dev(struct regulator_dev *rdev)
+{
+	return rdev_get_dev(rdev)->parent->parent;
+}
+
 static inline int check_range(struct da903x_regulator_info *info,
 				int min_uV, int max_uV)
 {
@@ -93,7 +98,7 @@ static int da903x_set_ldo_voltage(struct regulator_dev *rdev,
 				  int min_uV, int max_uV)
 {
 	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
-	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	struct device *da9034_dev = to_da903x_dev(rdev);
 	uint8_t val, mask;
 
 	if (check_range(info, min_uV, max_uV)) {
@@ -111,7 +116,7 @@ static int da903x_set_ldo_voltage(struct regulator_dev *rdev,
 static int da903x_get_voltage(struct regulator_dev *rdev)
 {
 	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
-	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	struct device *da9034_dev = to_da903x_dev(rdev);
 	uint8_t val, mask;
 	int ret;
 
@@ -128,7 +133,7 @@ static int da903x_get_voltage(struct regulator_dev *rdev)
 static int da903x_enable(struct regulator_dev *rdev)
 {
 	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
-	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	struct device *da9034_dev = to_da903x_dev(rdev);
 
 	return da903x_set_bits(da9034_dev, info->enable_reg,
 					1 << info->enable_bit);
@@ -137,7 +142,7 @@ static int da903x_enable(struct regulator_dev *rdev)
 static int da903x_disable(struct regulator_dev *rdev)
 {
 	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
-	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	struct device *da9034_dev = to_da903x_dev(rdev);
 
 	return da903x_clr_bits(da9034_dev, info->enable_reg,
 					1 << info->enable_bit);
@@ -146,7 +151,7 @@ static int da903x_disable(struct regulator_dev *rdev)
 static int da903x_is_enabled(struct regulator_dev *rdev)
 {
 	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
-	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	struct device *da9034_dev = to_da903x_dev(rdev);
 	uint8_t reg_val;
 	int ret;
 
@@ -162,7 +167,7 @@ static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev,
 				       int min_uV, int max_uV)
 {
 	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
-	struct device *da903x_dev = rdev_get_dev(rdev)->parent;
+	struct device *da903x_dev = to_da903x_dev(rdev);
 	uint8_t val, mask;
 	int ret;
 
@@ -189,7 +194,7 @@ static int da9030_set_ldo14_voltage(struct regulator_dev *rdev,
 				  int min_uV, int max_uV)
 {
 	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
-	struct device *da903x_dev = rdev_get_dev(rdev)->parent;
+	struct device *da903x_dev = to_da903x_dev(rdev);
 	uint8_t val, mask;
 	int thresh;
 
@@ -215,7 +220,7 @@ static int da9030_set_ldo14_voltage(struct regulator_dev *rdev,
 static int da9030_get_ldo14_voltage(struct regulator_dev *rdev)
 {
 	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
-	struct device *da903x_dev = rdev_get_dev(rdev)->parent;
+	struct device *da903x_dev = to_da903x_dev(rdev);
 	uint8_t val, mask;
 	int ret;
 
@@ -238,7 +243,7 @@ static int da9034_set_dvc_voltage(struct regulator_dev *rdev,
 				  int min_uV, int max_uV)
 {
 	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
-	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	struct device *da9034_dev = to_da903x_dev(rdev);
 	uint8_t val, mask;
 	int ret;
 
@@ -264,7 +269,7 @@ static int da9034_set_ldo12_voltage(struct regulator_dev *rdev,
 				    int min_uV, int max_uV)
 {
 	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
-	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	struct device *da9034_dev = to_da903x_dev(rdev);
 	uint8_t val, mask;
 
 	if (check_range(info, min_uV, max_uV)) {
@@ -283,7 +288,7 @@ static int da9034_set_ldo12_voltage(struct regulator_dev *rdev,
 static int da9034_get_ldo12_voltage(struct regulator_dev *rdev)
 {
 	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
-	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	struct device *da9034_dev = to_da903x_dev(rdev);
 	uint8_t val, mask;
 	int ret;
 
@@ -466,7 +471,7 @@ static int __devinit da903x_regulator_probe(struct platform_device *pdev)
 	if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15)
 		ri->desc.ops = &da9030_regulator_ldo1_15_ops;
 
-	rdev = regulator_register(&ri->desc, pdev->dev.parent, ri);
+	rdev = regulator_register(&ri->desc, &pdev->dev, ri);
 	if (IS_ERR(rdev)) {
 		dev_err(&pdev->dev, "failed to register regulator %s\n",
 				ri->desc.name);
diff --git a/drivers/rtc/rtc-ds3234.c b/drivers/rtc/rtc-ds3234.c
index 37d131d03f3..45e5b106af7 100644
--- a/drivers/rtc/rtc-ds3234.c
+++ b/drivers/rtc/rtc-ds3234.c
@@ -189,7 +189,7 @@ static const struct rtc_class_ops ds3234_rtc_ops = {
 	.set_time	= ds3234_set_time,
 };
 
-static int ds3234_probe(struct spi_device *spi)
+static int __devinit ds3234_probe(struct spi_device *spi)
 {
 	struct rtc_device *rtc;
 	unsigned char tmp;
@@ -249,7 +249,7 @@ static int ds3234_probe(struct spi_device *spi)
 	return 0;
 }
 
-static int __exit ds3234_remove(struct spi_device *spi)
+static int __devexit ds3234_remove(struct spi_device *spi)
 {
 	struct ds3234 *chip = platform_get_drvdata(spi);
 	struct rtc_device *rtc = chip->rtc;
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 910bc704939..f59277bbeda 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -455,6 +455,8 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 
 	s3c_rtc_setfreq(&pdev->dev, 1);
 
+	device_init_wakeup(&pdev->dev, 1);
+
 	/* register RTC and exit */
 
 	rtc = rtc_device_register("s3c", &pdev->dev, &s3c_rtcops,
@@ -507,7 +509,7 @@ static int s3c_rtc_resume(struct platform_device *pdev)
 #define s3c_rtc_resume  NULL
 #endif
 
-static struct platform_driver s3c2410_rtcdrv = {
+static struct platform_driver s3c2410_rtc_driver = {
 	.probe		= s3c_rtc_probe,
 	.remove		= __devexit_p(s3c_rtc_remove),
 	.suspend	= s3c_rtc_suspend,
@@ -523,12 +525,12 @@ static char __initdata banner[] = "S3C24XX RTC, (c) 2004,2006 Simtec Electronics
 static int __init s3c_rtc_init(void)
 {
 	printk(banner);
-	return platform_driver_register(&s3c2410_rtcdrv);
+	return platform_driver_register(&s3c2410_rtc_driver);
 }
 
 static void __exit s3c_rtc_exit(void)
 {
-	platform_driver_unregister(&s3c2410_rtcdrv);
+	platform_driver_unregister(&s3c2410_rtc_driver);
 }
 
 module_init(s3c_rtc_init);
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 023803dbb0c..ae18baf59f0 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -76,7 +76,7 @@ tapeblock_trigger_requeue(struct tape_device *device)
 static void
 tapeblock_end_request(struct request *req, int error)
 {
-	if (__blk_end_request(req, error, blk_rq_bytes(req)))
+	if (blk_end_request(req, error, blk_rq_bytes(req)))
 		BUG();
 }
 
@@ -166,7 +166,7 @@ tapeblock_requeue(struct work_struct *work) {
 		nr_queued++;
 	spin_unlock(get_ccwdev_lock(device->cdev));
 
-	spin_lock(&device->blk_data.request_queue_lock);
+	spin_lock_irq(&device->blk_data.request_queue_lock);
 	while (
 		!blk_queue_plugged(queue) &&
 		elv_next_request(queue)   &&
@@ -176,7 +176,9 @@ tapeblock_requeue(struct work_struct *work) {
 		if (rq_data_dir(req) == WRITE) {
 			DBF_EVENT(1, "TBLOCK: Rejecting write request\n");
 			blkdev_dequeue_request(req);
+			spin_unlock_irq(&device->blk_data.request_queue_lock);
 			tapeblock_end_request(req, -EIO);
+			spin_lock_irq(&device->blk_data.request_queue_lock);
 			continue;
 		}
 		blkdev_dequeue_request(req);
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index d7073dbf825..f9bb51fa7f5 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -1200,7 +1200,7 @@ tape_open(struct tape_device *device)
 {
 	int rc;
 
-	spin_lock(get_ccwdev_lock(device->cdev));
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
 	if (device->tape_state == TS_NOT_OPER) {
 		DBF_EVENT(6, "TAPE:nodev\n");
 		rc = -ENODEV;
@@ -1218,7 +1218,7 @@ tape_open(struct tape_device *device)
 		tape_state_set(device, TS_IN_USE);
 		rc = 0;
 	}
-	spin_unlock(get_ccwdev_lock(device->cdev));
+	spin_unlock_irq(get_ccwdev_lock(device->cdev));
 	return rc;
 }
 
@@ -1228,11 +1228,11 @@ tape_open(struct tape_device *device)
 int
 tape_release(struct tape_device *device)
 {
-	spin_lock(get_ccwdev_lock(device->cdev));
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
 	if (device->tape_state == TS_IN_USE)
 		tape_state_set(device, TS_UNUSED);
 	module_put(device->discipline->owner);
-	spin_unlock(get_ccwdev_lock(device->cdev));
+	spin_unlock_irq(get_ccwdev_lock(device->cdev));
 	return 0;
 }
 
diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c
index b5390821434..f05590355be 100644
--- a/drivers/s390/cio/qdio_debug.c
+++ b/drivers/s390/cio/qdio_debug.c
@@ -20,6 +20,7 @@ static struct dentry *debugfs_root;
 #define MAX_DEBUGFS_QUEUES	32
 static struct dentry *debugfs_queues[MAX_DEBUGFS_QUEUES] = { NULL };
 static DEFINE_MUTEX(debugfs_mutex);
+#define QDIO_DEBUGFS_NAME_LEN	40
 
 void qdio_allocate_do_dbf(struct qdio_initialize *init_data)
 {
@@ -152,17 +153,6 @@ static int qstat_seq_open(struct inode *inode, struct file *filp)
 			   filp->f_path.dentry->d_inode->i_private);
 }
 
-static void get_queue_name(struct qdio_q *q, struct ccw_device *cdev, char *name)
-{
-	memset(name, 0, sizeof(name));
-	sprintf(name, "%s", dev_name(&cdev->dev));
-	if (q->is_input_q)
-		sprintf(name + strlen(name), "_input");
-	else
-		sprintf(name + strlen(name), "_output");
-	sprintf(name + strlen(name), "_%d", q->nr);
-}
-
 static void remove_debugfs_entry(struct qdio_q *q)
 {
 	int i;
@@ -189,14 +179,17 @@ static struct file_operations debugfs_fops = {
 static void setup_debugfs_entry(struct qdio_q *q, struct ccw_device *cdev)
 {
 	int i = 0;
-	char name[40];
+	char name[QDIO_DEBUGFS_NAME_LEN];
 
 	while (debugfs_queues[i] != NULL) {
 		i++;
 		if (i >= MAX_DEBUGFS_QUEUES)
 			return;
 	}
-	get_queue_name(q, cdev, name);
+	snprintf(name, QDIO_DEBUGFS_NAME_LEN, "%s_%s_%d",
+		 dev_name(&cdev->dev),
+		 q->is_input_q ? "input" : "output",
+		 q->nr);
 	debugfs_queues[i] = debugfs_create_file(name, S_IFREG | S_IRUGO | S_IWUSR,
 						debugfs_root, q, &debugfs_fops);
 }
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index a50682d2a0f..7c865915199 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -1083,7 +1083,6 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 		case -EIO:
 			sprintf(dbf_text, "ierr%4x", irq_ptr->schid.sch_no);
 			QDIO_DBF_TEXT2(1, setup, dbf_text);
-			qdio_int_error(cdev);
 			return;
 		case -ETIMEDOUT:
 			sprintf(dbf_text, "qtoh%4x", irq_ptr->schid.sch_no);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 7de410d5be4..52d26592c72 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3025,7 +3025,7 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb,
 	struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill,
 	int offset)
 {
-	int length = skb->len - offset;
+	int length = skb->len;
 	int length_here;
 	int element;
 	char *data;
@@ -3037,6 +3037,7 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb,
 
 	if (offset >= 0) {
 		data = skb->data + offset;
+		length -= offset;
 		first_lap = 0;
 	}
 
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 955ba7a31b9..1b1e80336d2 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -373,8 +373,6 @@ static int qeth_l2_stop_card(struct qeth_card *card, int recovery_mode)
 	QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *));
 
 	qeth_set_allowed_threads(card, 0, 1);
-	if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD))
-		return -ERESTARTSYS;
 	if (card->read.state == CH_STATE_UP &&
 	    card->write.state == CH_STATE_UP &&
 	    (card->state == CARD_STATE_UP)) {
@@ -451,12 +449,15 @@ static void qeth_l2_process_inbound_buffer(struct qeth_card *card,
 			netif_rx(skb);
 			break;
 		case QETH_HEADER_TYPE_OSN:
-			skb_push(skb, sizeof(struct qeth_hdr));
-			skb_copy_to_linear_data(skb, hdr,
+			if (card->info.type == QETH_CARD_TYPE_OSN) {
+				skb_push(skb, sizeof(struct qeth_hdr));
+				skb_copy_to_linear_data(skb, hdr,
 						sizeof(struct qeth_hdr));
-			len = skb->len;
-			card->osn_info.data_cb(skb);
-			break;
+				len = skb->len;
+				card->osn_info.data_cb(skb);
+				break;
+			}
+			/* else unknown */
 		default:
 			dev_kfree_skb_any(skb);
 			QETH_DBF_TEXT(TRACE, 3, "inbunkno");
@@ -975,12 +976,6 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 	QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *));
 
 	qeth_set_allowed_threads(card, QETH_RECOVER_THREAD, 1);
-	if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) {
-		PRINT_WARN("set_online of card %s interrupted by user!\n",
-			   CARD_BUS_ID(card));
-		return -ERESTARTSYS;
-	}
-
 	recover_flag = card->state;
 	rc = ccw_device_set_online(CARD_RDEV(card));
 	if (rc) {
@@ -1091,11 +1086,7 @@ static int __qeth_l2_set_offline(struct ccwgroup_device *cgdev,
 	if (card->dev && netif_carrier_ok(card->dev))
 		netif_carrier_off(card->dev);
 	recover_flag = card->state;
-	if (qeth_l2_stop_card(card, recovery_mode) == -ERESTARTSYS) {
-		PRINT_WARN("Stopping card %s interrupted by user!\n",
-			   CARD_BUS_ID(card));
-		return -ERESTARTSYS;
-	}
+	qeth_l2_stop_card(card, recovery_mode);
 	rc  = ccw_device_set_offline(CARD_DDEV(card));
 	rc2 = ccw_device_set_offline(CARD_WDEV(card));
 	rc3 = ccw_device_set_offline(CARD_RDEV(card));
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 99547dea44d..ed59fedd592 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2064,8 +2064,6 @@ static int qeth_l3_stop_card(struct qeth_card *card, int recovery_mode)
 	QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *));
 
 	qeth_set_allowed_threads(card, 0, 1);
-	if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD))
-		return -ERESTARTSYS;
 	if (card->read.state == CH_STATE_UP &&
 	    card->write.state == CH_STATE_UP &&
 	    (card->state == CARD_STATE_UP)) {
@@ -3049,11 +3047,6 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 	QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *));
 
 	qeth_set_allowed_threads(card, QETH_RECOVER_THREAD, 1);
-	if (qeth_wait_for_threads(card, ~QETH_RECOVER_THREAD)) {
-		PRINT_WARN("set_online of card %s interrupted by user!\n",
-			   CARD_BUS_ID(card));
-		return -ERESTARTSYS;
-	}
 
 	recover_flag = card->state;
 	rc = ccw_device_set_online(CARD_RDEV(card));
@@ -3170,11 +3163,7 @@ static int __qeth_l3_set_offline(struct ccwgroup_device *cgdev,
 	if (card->dev && netif_carrier_ok(card->dev))
 		netif_carrier_off(card->dev);
 	recover_flag = card->state;
-	if (qeth_l3_stop_card(card, recovery_mode) == -ERESTARTSYS) {
-		PRINT_WARN("Stopping card %s interrupted by user!\n",
-			   CARD_BUS_ID(card));
-		return -ERESTARTSYS;
-	}
+	qeth_l3_stop_card(card, recovery_mode);
 	rc  = ccw_device_set_offline(CARD_DDEV(card));
 	rc2 = ccw_device_set_offline(CARD_WDEV(card));
 	rc3 = ccw_device_set_offline(CARD_RDEV(card));
diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c
index 210ddb63974..c144b9924d5 100644
--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -121,9 +121,6 @@ static ssize_t qeth_l3_dev_route6_show(struct device *dev,
 	if (!card)
 		return -EINVAL;
 
-	if (!qeth_is_supported(card, IPA_IPV6))
-		return sprintf(buf, "%s\n", "n/a");
-
 	return qeth_l3_dev_route_show(card, &card->options.route6, buf);
 }
 
@@ -135,10 +132,6 @@ static ssize_t qeth_l3_dev_route6_store(struct device *dev,
 	if (!card)
 		return -EINVAL;
 
-	if (!qeth_is_supported(card, IPA_IPV6)) {
-		return -EOPNOTSUPP;
-	}
-
 	return qeth_l3_dev_route_store(card, &card->options.route6,
 				QETH_PROT_IPV6, buf, count);
 }
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index c33bcb284df..56f4e6bffc2 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -290,9 +290,11 @@
 #include <scsi/scsi_ioctl.h>
 #include "fdomain.h"
 
+#ifndef PCMCIA
 MODULE_AUTHOR("Rickard E. Faith");
 MODULE_DESCRIPTION("Future domain SCSI driver");
 MODULE_LICENSE("GPL");
+#endif
 
   
 #define VERSION          "$Revision: 5.51 $"
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index c94d3c4b752..579d63a81aa 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1276,7 +1276,7 @@ config SERIAL_SGI_IOC3
 	  say Y or M.  Otherwise, say N.
 
 config SERIAL_NETX
-	bool "NetX serial port support"
+	tristate "NetX serial port support"
 	depends on ARM && ARCH_NETX
 	select SERIAL_CORE
 	help
@@ -1288,7 +1288,7 @@ config SERIAL_NETX
 
 config SERIAL_NETX_CONSOLE
 	bool "Console on NetX serial port"
-	depends on SERIAL_NETX
+	depends on SERIAL_NETX=y
 	select SERIAL_CORE_CONSOLE
 	help
 	  If you have enabled the serial port on the Hilscher NetX SoC
diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c
index 3f489329e8d..3e5dda8518b 100644
--- a/drivers/serial/netx-serial.c
+++ b/drivers/serial/netx-serial.c
@@ -42,8 +42,6 @@
 #define SERIAL_NX_MAJOR	204
 #define MINOR_START	170
 
-#ifdef CONFIG_SERIAL_NETX_CONSOLE
-
 enum uart_regs {
 	UART_DR              = 0x00,
 	UART_SR              = 0x04,
@@ -528,6 +526,8 @@ static struct netx_port netx_ports[] = {
 	}
 };
 
+#ifdef CONFIG_SERIAL_NETX_CONSOLE
+
 static void netx_console_putchar(struct uart_port *port, int ch)
 {
 	while (readl(port->membase + UART_FR) & FR_BUSY);
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 543811f6e6e..8e74657f106 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -133,7 +133,7 @@ static int usbtmc_release(struct inode *inode, struct file *file)
 
 static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data)
 {
-	char *buffer;
+	u8 *buffer;
 	struct device *dev;
 	int rv;
 	int n;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index fc9018e72a0..e1b42626d04 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -106,6 +106,9 @@ static DEFINE_SPINLOCK(hcd_root_hub_lock);
 /* used when updating an endpoint's URB list */
 static DEFINE_SPINLOCK(hcd_urb_list_lock);
 
+/* used to protect against unlinking URBs after the device is gone */
+static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
+
 /* wait queue for synchronous unlinks */
 DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
 
@@ -1376,10 +1379,25 @@ static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
 int usb_hcd_unlink_urb (struct urb *urb, int status)
 {
 	struct usb_hcd		*hcd;
-	int			retval;
+	int			retval = -EIDRM;
+	unsigned long		flags;
 
-	hcd = bus_to_hcd(urb->dev->bus);
-	retval = unlink1(hcd, urb, status);
+	/* Prevent the device and bus from going away while
+	 * the unlink is carried out.  If they are already gone
+	 * then urb->use_count must be 0, since disconnected
+	 * devices can't have any active URBs.
+	 */
+	spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
+	if (atomic_read(&urb->use_count) > 0) {
+		retval = 0;
+		usb_get_dev(urb->dev);
+	}
+	spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
+	if (retval == 0) {
+		hcd = bus_to_hcd(urb->dev->bus);
+		retval = unlink1(hcd, urb, status);
+		usb_put_dev(urb->dev);
+	}
 
 	if (retval == 0)
 		retval = -EINPROGRESS;
@@ -1528,6 +1546,17 @@ void usb_hcd_disable_endpoint(struct usb_device *udev,
 		hcd->driver->endpoint_disable(hcd, ep);
 }
 
+/* Protect against drivers that try to unlink URBs after the device
+ * is gone, by waiting until all unlinks for @udev are finished.
+ * Since we don't currently track URBs by device, simply wait until
+ * nothing is running in the locked region of usb_hcd_unlink_urb().
+ */
+void usb_hcd_synchronize_unlinks(struct usb_device *udev)
+{
+	spin_lock_irq(&hcd_urb_unlink_lock);
+	spin_unlock_irq(&hcd_urb_unlink_lock);
+}
+
 /*-------------------------------------------------------------------------*/
 
 /* called in any context */
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 2dcde61c465..9465e70f4dd 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -232,6 +232,7 @@ extern void usb_hcd_flush_endpoint(struct usb_device *udev,
 		struct usb_host_endpoint *ep);
 extern void usb_hcd_disable_endpoint(struct usb_device *udev,
 		struct usb_host_endpoint *ep);
+extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
 extern int usb_hcd_get_frame_number(struct usb_device *udev);
 
 extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 9b3f16bd12c..b19cbfcd51d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -659,6 +659,9 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			PREPARE_DELAYED_WORK(&hub->init_work, hub_init_func2);
 			schedule_delayed_work(&hub->init_work,
 					msecs_to_jiffies(delay));
+
+			/* Suppress autosuspend until init is done */
+			to_usb_interface(hub->intfdev)->pm_usage_cnt = 1;
 			return;		/* Continues at init2: below */
 		} else {
 			hub_power_on(hub, true);
@@ -1429,6 +1432,7 @@ void usb_disconnect(struct usb_device **pdev)
 	 */
 	dev_dbg (&udev->dev, "unregistering device\n");
 	usb_disable_device(udev, 0);
+	usb_hcd_synchronize_unlinks(udev);
 
 	usb_unlock_device(udev);
 
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index f2638009a46..4342bd9c3bb 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -474,6 +474,12 @@ EXPORT_SYMBOL_GPL(usb_submit_urb);
  * indicating that the request has been canceled (rather than any other
  * code).
  *
+ * Drivers should not call this routine or related routines, such as
+ * usb_kill_urb() or usb_unlink_anchored_urbs(), after their disconnect
+ * method has returned.  The disconnect function should synchronize with
+ * a driver's I/O routines to insure that all URB-related activity has
+ * completed before it returns.
+ *
  * This request is always asynchronous.  Success is indicated by
  * returning -EINPROGRESS, at which time the URB will probably not yet
  * have been given back to the device driver.  When it is eventually
@@ -550,6 +556,9 @@ EXPORT_SYMBOL_GPL(usb_unlink_urb);
  * This routine may not be used in an interrupt context (such as a bottom
  * half or a completion handler), or when holding a spinlock, or in other
  * situations where the caller can't schedule().
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
  */
 void usb_kill_urb(struct urb *urb)
 {
@@ -588,6 +597,9 @@ EXPORT_SYMBOL_GPL(usb_kill_urb);
  * This routine may not be used in an interrupt context (such as a bottom
  * half or a completion handler), or when holding a spinlock, or in other
  * situations where the caller can't schedule().
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
  */
 void usb_poison_urb(struct urb *urb)
 {
@@ -622,6 +634,9 @@ EXPORT_SYMBOL_GPL(usb_unpoison_urb);
  *
  * this allows all outstanding URBs to be killed starting
  * from the back of the queue
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
  */
 void usb_kill_anchored_urbs(struct usb_anchor *anchor)
 {
@@ -651,6 +666,9 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
  * this allows all outstanding URBs to be poisoned starting
  * from the back of the queue. Newly added URBs will also be
  * poisoned
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
  */
 void usb_poison_anchored_urbs(struct usb_anchor *anchor)
 {
@@ -672,6 +690,7 @@ void usb_poison_anchored_urbs(struct usb_anchor *anchor)
 	spin_unlock_irq(&anchor->lock);
 }
 EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs);
+
 /**
  * usb_unlink_anchored_urbs - asynchronously cancel transfer requests en masse
  * @anchor: anchor the requests are bound to
@@ -680,6 +699,9 @@ EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs);
  * from the back of the queue. This function is asynchronous.
  * The unlinking is just tiggered. It may happen after this
  * function has returned.
+ *
+ * This routine should not be called by a driver after its disconnect
+ * method has returned.
  */
 void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
 {
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 8be3f39891c..794b5ffe439 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -281,6 +281,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
 			if (tty->driver_data)
 				tty->driver_data = NULL;
 			tty_port_tty_set(&port->port, NULL);
+			tty_kref_put(tty);
 		}
 	}
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index a2b9ebbef38..fb9e20e624c 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -333,6 +333,13 @@ UNUSUAL_DEV(  0x0482, 0x0103, 0x0100, 0x0100,
 		"Finecam S5",
 		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
 
+/* Patch submitted by Jens Taprogge <jens.taprogge@taprogge.org> */
+UNUSUAL_DEV(  0x0482, 0x0107, 0x0100, 0x0100,
+		"Kyocera",
+		"CONTAX SL300R T*",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE),
+
 /* Reported by Paul Stewart <stewart@wetlogic.net>
  * This entry is needed because the device reports Sub=ff */
 UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
index 2afd47eefe7..f8a4bb20f41 100644
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -439,7 +439,7 @@ static int corgi_bl_update_status(struct backlight_device *bd)
 	return corgi_bl_set_intensity(lcd, intensity);
 }
 
-void corgibl_limit_intensity(int limit)
+void corgi_lcd_limit_intensity(int limit)
 {
 	if (limit)
 		corgibl_flags |= CORGIBL_BATTLOW;
@@ -448,7 +448,7 @@ void corgibl_limit_intensity(int limit)
 
 	backlight_update_status(the_corgi_lcd->bl_dev);
 }
-EXPORT_SYMBOL(corgibl_limit_intensity);
+EXPORT_SYMBOL(corgi_lcd_limit_intensity);
 
 static struct backlight_ops corgi_bl_ops = {
 	.get_brightness	= corgi_bl_get_intensity,
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 64b3d30027b..b92947d62ad 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -2118,7 +2118,7 @@ static void fbcon_bmove_rec(struct vc_data *vc, struct display *p, int sy, int s
 		   height, width);
 }
 
-static __inline__ void updatescrollmode(struct display *p,
+static void updatescrollmode(struct display *p,
 					struct fb_info *info,
 					struct vc_data *vc)
 {
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index cd5f20da738..6048b55f287 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1262,8 +1262,8 @@ fb_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case FBIOPUT_CON2FBMAP:
 		arg = (unsigned long) compat_ptr(arg);
 	case FBIOBLANK:
-		ret = fb_ioctl(file, cmd, arg);
-		break;
+		mutex_unlock(&info->lock);
+		return fb_ioctl(file, cmd, arg);
 
 	case FBIOGET_FSCREENINFO:
 		ret = fb_get_fscreeninfo(inode, file, cmd, arg);
diff --git a/drivers/video/via/global.h b/drivers/video/via/global.h
index 8e5263c5b81..7543d5f7e30 100644
--- a/drivers/video/via/global.h
+++ b/drivers/video/via/global.h
@@ -38,7 +38,6 @@
 #include "iface.h"
 #include "viafbdev.h"
 #include "chip.h"
-#include "debug.h"
 #include "accel.h"
 #include "share.h"
 #include "dvi.h"
@@ -48,12 +47,10 @@
 
 #include "lcd.h"
 #include "ioctl.h"
-#include "viamode.h"
 #include "via_utility.h"
 #include "vt1636.h"
 #include "tblDPASetting.h"
 #include "tbl1636.h"
-#include "viafbdev.h"
 
 /* External struct*/
 
diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c
index 6e46a551395..3e57aa4d643 100644
--- a/drivers/watchdog/acquirewdt.c
+++ b/drivers/watchdog/acquirewdt.c
@@ -3,8 +3,8 @@
  *
  *      Based on wdt.c. Original copyright messages:
  *
- *	(c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *				http://www.redhat.com
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -15,7 +15,7 @@
  *	warranty for any of this software. This material is provided
  *	"AS-IS" and at no charge.
  *
- *	(c) Copyright 1995    Alan Cox <alan@redhat.com>
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  *      14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
  *          Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c
index a5110f93a75..a1d7856ea6e 100644
--- a/drivers/watchdog/advantechwdt.c
+++ b/drivers/watchdog/advantechwdt.c
@@ -6,8 +6,8 @@
  *	Based on acquirewdt.c which is based on wdt.c.
  *	Original copyright messages:
  *
- *	(c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *				http://www.redhat.com
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -18,7 +18,7 @@
  *	warranty for any of this software. This material is provided
  *	"AS-IS" and at no charge.
  *
- *	(c) Copyright 1995    Alan Cox <alan@redhat.com>
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  *	14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
  *	    Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index 31b42253054..067a57cb3f8 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -5,7 +5,7 @@
  * Originally based on softdog.c
  * Copyright 2006-2007 Analog Devices Inc.
  * Copyright 2006-2007 Michele d'Amico
- * Copyright 1996 Alan Cox <alan@redhat.com>
+ * Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * Enter bugs at http://blackfin.uclinux.org/
  *
diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c
index bbd14e34319..a171fc6ae1c 100644
--- a/drivers/watchdog/eurotechwdt.c
+++ b/drivers/watchdog/eurotechwdt.c
@@ -8,8 +8,8 @@
  *	Based on wdt.c.
  *	Original copyright messages:
  *
- *      (c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *                              http://www.redhat.com
+ *      (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
index c13383f7fcb..74f951c18b9 100644
--- a/drivers/watchdog/i6300esb.c
+++ b/drivers/watchdog/i6300esb.c
@@ -394,8 +394,7 @@ static unsigned char __init esb_getdevice(void)
 			goto err_disable;
 		}
 
-		BASEADDR = ioremap(pci_resource_start(esb_pci, 0),
-				   pci_resource_len(esb_pci, 0));
+		BASEADDR = pci_ioremap_bar(esb_pci, 0);
 		if (BASEADDR == NULL) {
 			/* Something's wrong here, BASEADDR has to be set */
 			printk(KERN_ERR PFX "failed to get BASEADDR\n");
diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c
index 8782ec1f5aa..317ef2b16cf 100644
--- a/drivers/watchdog/ib700wdt.c
+++ b/drivers/watchdog/ib700wdt.c
@@ -11,8 +11,8 @@
  *	Based on acquirewdt.c which is based on wdt.c.
  *	Original copyright messages:
  *
- *	(c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *				http://www.redhat.com
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -23,7 +23,7 @@
  *	warranty for any of this software. This material is provided
  *	"AS-IS" and at no charge.
  *
- *	(c) Copyright 1995    Alan Cox <alan@redhat.com>
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  *	14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
  *	     Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c
index 73c9e7992fe..0f761db9a27 100644
--- a/drivers/watchdog/indydog.c
+++ b/drivers/watchdog/indydog.c
@@ -9,7 +9,7 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  *
- *	based on softdog.c by Alan Cox <alan@redhat.com>
+ *	based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk>
  */
 
 #include <linux/module.h>
diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c
index 2a9bfa81f9d..1130ad697ce 100644
--- a/drivers/watchdog/mpcore_wdt.c
+++ b/drivers/watchdog/mpcore_wdt.c
@@ -4,8 +4,8 @@
  *	(c) Copyright 2004 ARM Limited
  *
  *	Based on the SoftDog driver:
- *	(c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *				http://www.redhat.com
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ * 						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 7bcbb7f4745..2f2ce7429f5 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -16,7 +16,7 @@
  * 20030527: George G. Davis <gdavis@mvista.com>
  *	Initially based on linux-2.4.19-rmk7-pxa1/drivers/char/sa1100_wdt.c
  *	(c) Copyright 2000 Oleg Drokin <green@crimea.edu>
- *	Based on SoftDog driver by Alan Cox <alan@redhat.com>
+ *	Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * Copyright (c) 2004 Texas Instruments.
  *	1. Modified to support OMAP1610 32-KHz watchdog timer
diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c
index 90eb1d4271d..5d76422c402 100644
--- a/drivers/watchdog/pcwd_pci.c
+++ b/drivers/watchdog/pcwd_pci.c
@@ -6,7 +6,7 @@
  *	Based on source code of the following authors:
  *	  Ken Hollis <kenji@bitgate.com>,
  *	  Lindsay Harris <lindsay@bluegum.com>,
- *	  Alan Cox <alan@redhat.com>,
+ *	  Alan Cox <alan@lxorguk.ukuu.org.uk>,
  *	  Matt Domsch <Matt_Domsch@dell.com>,
  *	  Rob Radez <rob@osinvestor.com>
  *
diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c
index c1685c942de..afb089695da 100644
--- a/drivers/watchdog/pcwd_usb.c
+++ b/drivers/watchdog/pcwd_usb.c
@@ -5,7 +5,7 @@
  *
  *	Based on source code of the following authors:
  *	  Ken Hollis <kenji@bitgate.com>,
- *	  Alan Cox <alan@redhat.com>,
+ *	  Alan Cox <alan@lxorguk.ukuu.org.uk>,
  *	  Matt Domsch <Matt_Domsch@dell.com>,
  *	  Rob Radez <rob@osinvestor.com>,
  *	  Greg Kroah-Hartman <greg@kroah.com>
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
index c9c73b69c5e..57027f4653c 100644
--- a/drivers/watchdog/rc32434_wdt.c
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -7,7 +7,8 @@
  *  based on
  *  SoftDog 0.05:	A Software Watchdog Device
  *
- *  (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ *  (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *					All Rights Reserved.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 86d42801de4..f7f6ce82a5e 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -6,7 +6,7 @@
  * S3C2410 Watchdog Timer Support
  *
  * Based on, softdog.c by Alan Cox,
- *     (c) Copyright 1996 Alan Cox <alan@redhat.com>
+ *     (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
index 31a48437dc3..ed01e4c2bef 100644
--- a/drivers/watchdog/sa1100_wdt.c
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -2,7 +2,7 @@
  *	Watchdog driver for the SA11x0/PXA2xx
  *
  *      (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
- *          Based on SoftDog driver by Alan Cox <alan@redhat.com>
+ *          Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c
index 27e526a07c9..38f5831c929 100644
--- a/drivers/watchdog/sb_wdog.c
+++ b/drivers/watchdog/sb_wdog.c
@@ -35,8 +35,8 @@
  * Based on various other watchdog drivers, which are probably all
  * loosely based on something Alan Cox wrote years ago.
  *
- *	(c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *				http://www.redhat.com
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c
index fd83dd052d8..ae74f6bcfa2 100644
--- a/drivers/watchdog/sbc8360.c
+++ b/drivers/watchdog/sbc8360.c
@@ -16,8 +16,8 @@
  *	Based on acquirewdt.c which is based on wdt.c.
  *	Original copyright messages:
  *
- *	(c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *				http://www.redhat.com
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -28,7 +28,7 @@
  *	warranty for any of this software. This material is provided
  *	"AS-IS" and at no charge.
  *
- *	(c) Copyright 1995    Alan Cox <alan@redhat.com>
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  *      14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
  *           Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c
index e5e470ca775..06553debc7b 100644
--- a/drivers/watchdog/sbc_epx_c3.c
+++ b/drivers/watchdog/sbc_epx_c3.c
@@ -10,7 +10,7 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  *
- *	based on softdog.c by Alan Cox <alan@redhat.com>
+ *	based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk>
  */
 
 #include <linux/module.h>
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index 988ff1d5b4b..2e56cad77d1 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -1,7 +1,7 @@
 /*
  *	SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x
  *
- *      Based on acquirewdt.c by Alan Cox <alan@redhat.com>
+ *	Based on acquirewdt.c by Alan Cox <alan@lxorguk.ukuu.org.uk>
  *       and some other existing drivers
  *
  *	This program is free software; you can redistribute it and/or
diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c
index c650464c5c6..7204f966211 100644
--- a/drivers/watchdog/softdog.c
+++ b/drivers/watchdog/softdog.c
@@ -1,8 +1,7 @@
 /*
  *	SoftDog	0.07:	A Software Watchdog Device
  *
- *	(c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *				http://www.redhat.com
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 69396adaa5c..916890abffd 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -11,8 +11,8 @@
  *
  *	(c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
  *
- *	(c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *				http://www.redhat.com
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -23,7 +23,7 @@
  *	warranty for any of this software. This material is provided
  *	"AS-IS" and at no charge.
  *
- *	(c) Copyright 1995    Alan Cox <alan@redhat.com>
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
  */
 
 #include <linux/module.h>
diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c
index 445d30a01ed..3c7aa412b1f 100644
--- a/drivers/watchdog/w83697hf_wdt.c
+++ b/drivers/watchdog/w83697hf_wdt.c
@@ -12,8 +12,8 @@
  *
  *	(c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
  *
- *	(c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *				http://www.redhat.com
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c
index 68377ae171f..42e940c2389 100644
--- a/drivers/watchdog/wafer5823wdt.c
+++ b/drivers/watchdog/wafer5823wdt.c
@@ -10,8 +10,8 @@
  *	Based on advantechwdt.c which is based on wdt.c.
  *	Original copyright messages:
  *
- *	(c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *				http://www.redhat.com
+ *	(c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
index deeebb2b13e..eddb9187e7b 100644
--- a/drivers/watchdog/wdt.c
+++ b/drivers/watchdog/wdt.c
@@ -1,8 +1,8 @@
 /*
  *	Industrial Computer Source WDT500/501 driver
  *
- *	(c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *				http://www.redhat.com
+ *	(c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c
index 191ea630210..f55135662d7 100644
--- a/drivers/watchdog/wdt285.c
+++ b/drivers/watchdog/wdt285.c
@@ -6,7 +6,8 @@
  *
  *	SoftDog	0.05:	A Software Watchdog Device
  *
- *	(c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index ed02bdb38c0..c45839a4a34 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -1,8 +1,8 @@
 /*
  *	Industrial Computer Source PCI-WDT500/501 driver
  *
- *	(c) Copyright 1996-1997 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *				http://www.redhat.com
+ *	(c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						 All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 9ce1ab6c268..1e3b934a4cf 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -774,7 +774,7 @@ void xen_poll_irq(int irq)
 
 		poll.nr_ports = 1;
 		poll.timeout = 0;
-		poll.ports = &evtchn;
+		set_xen_guest_handle(poll.ports, &evtchn);
 
 		if (HYPERVISOR_sched_op(SCHEDOP_poll, &poll) != 0)
 			BUG();
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index d0e87cbe157..9b91617b958 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -39,8 +39,6 @@ static int xen_suspend(void *data)
 
 	BUG_ON(!irqs_disabled());
 
-	load_cr3(swapper_pg_dir);
-
 	err = device_power_down(PMSG_SUSPEND);
 	if (err) {
 		printk(KERN_ERR "xen_suspend: device_power_down failed: %d\n",
diff --git a/drivers/xen/xencomm.c b/drivers/xen/xencomm.c
index 797cb4e31f0..a240b2c20b9 100644
--- a/drivers/xen/xencomm.c
+++ b/drivers/xen/xencomm.c
@@ -23,13 +23,7 @@
 #include <asm/page.h>
 #include <xen/xencomm.h>
 #include <xen/interface/xen.h>
-#ifdef __ia64__
-#include <asm/xen/xencomm.h>	/* for is_kern_addr() */
-#endif
-
-#ifdef HAVE_XEN_PLATFORM_COMPAT_H
-#include <xen/platform-compat.h>
-#endif
+#include <asm/xen/xencomm.h>	/* for xencomm_is_phys_contiguous() */
 
 static int xencomm_init(struct xencomm_desc *desc,
 			void *buffer, unsigned long bytes)
@@ -157,20 +151,11 @@ static int xencomm_create(void *buffer, unsigned long bytes,
 	return 0;
 }
 
-/* check if memory address is within VMALLOC region  */
-static int is_phys_contiguous(unsigned long addr)
-{
-	if (!is_kernel_addr(addr))
-		return 0;
-
-	return (addr < VMALLOC_START) || (addr >= VMALLOC_END);
-}
-
 static struct xencomm_handle *xencomm_create_inline(void *ptr)
 {
 	unsigned long paddr;
 
-	BUG_ON(!is_phys_contiguous((unsigned long)ptr));
+	BUG_ON(!xencomm_is_phys_contiguous((unsigned long)ptr));
 
 	paddr = (unsigned long)xencomm_pa(ptr);
 	BUG_ON(paddr & XENCOMM_INLINE_FLAG);
@@ -202,7 +187,7 @@ struct xencomm_handle *xencomm_map(void *ptr, unsigned long bytes)
 	int rc;
 	struct xencomm_desc *desc;
 
-	if (is_phys_contiguous((unsigned long)ptr))
+	if (xencomm_is_phys_contiguous((unsigned long)ptr))
 		return xencomm_create_inline(ptr);
 
 	rc = xencomm_create(ptr, bytes, &desc, GFP_KERNEL);
@@ -219,7 +204,7 @@ struct xencomm_handle *__xencomm_map_no_alloc(void *ptr, unsigned long bytes,
 	int rc;
 	struct xencomm_desc *desc = NULL;
 
-	if (is_phys_contiguous((unsigned long)ptr))
+	if (xencomm_is_phys_contiguous((unsigned long)ptr))
 		return xencomm_create_inline(ptr);
 
 	rc = xencomm_create_mini(ptr, bytes, xc_desc,