memory_accessor: implement the new memory_accessor interfaces for SPI EEPROMs

- Define new setup() hook to export the accessor
 - Implement accessor methods

Moves some error checking out of the sysfs interface code into the layer
below it, which is now shared by both sysfs and memory access code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 44 insertions, 14 deletions

diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 290dbe99647..6bc0dac5c1e 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -30,6 +30,7 @@
 
 struct at25_data {
 	struct spi_device	*spi;
+	struct memory_accessor	mem;
 	struct mutex		lock;
 	struct spi_eeprom	chip;
 	struct bin_attribute	bin;
@@ -75,6 +76,13 @@ at25_ee_read(
 	struct spi_transfer	t[2];
 	struct spi_message	m;
 
+	if (unlikely(offset >= at25->bin.size))
+		return 0;
+	if ((offset + count) > at25->bin.size)
+		count = at25->bin.size - offset;
+	if (unlikely(!count))
+		return count;
+
 	cp = command;
 	*cp++ = AT25_READ;
 
@@ -127,13 +135,6 @@ at25_bin_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 	dev = container_of(kobj, struct device, kobj);
 	at25 = dev_get_drvdata(dev);
 
-	if (unlikely(off >= at25->bin.size))
-		return 0;
-	if ((off + count) > at25->bin.size)
-		count = at25->bin.size - off;
-	if (unlikely(!count))
-		return count;
-
 	return at25_ee_read(at25, buf, off, count);
 }
 
@@ -146,6 +147,13 @@ at25_ee_write(struct at25_data *at25, char *buf, loff_t off, size_t count)
 	unsigned		buf_size;
 	u8			*bounce;
 
+	if (unlikely(off >= at25->bin.size))
+		return -EFBIG;
+	if ((off + count) > at25->bin.size)
+		count = at25->bin.size - off;
+	if (unlikely(!count))
+		return count;
+
 	/* Temp buffer starts with command and address */
 	buf_size = at25->chip.page_size;
 	if (buf_size > io_limit)
@@ -253,18 +261,31 @@ at25_bin_write(struct kobject *kobj, struct bin_attribute *bin_attr,
 	dev = container_of(kobj, struct device, kobj);
 	at25 = dev_get_drvdata(dev);
 
-	if (unlikely(off >= at25->bin.size))
-		return -EFBIG;
-	if ((off + count) > at25->bin.size)
-		count = at25->bin.size - off;
-	if (unlikely(!count))
-		return count;
-
 	return at25_ee_write(at25, buf, off, count);
 }
 
 /*-------------------------------------------------------------------------*/
 
+/* Let in-kernel code access the eeprom data. */
+
+static ssize_t at25_mem_read(struct memory_accessor *mem, char *buf,
+			 off_t offset, size_t count)
+{
+	struct at25_data *at25 = container_of(mem, struct at25_data, mem);
+
+	return at25_ee_read(at25, buf, offset, count);
+}
+
+static ssize_t at25_mem_write(struct memory_accessor *mem, char *buf,
+			  off_t offset, size_t count)
+{
+	struct at25_data *at25 = container_of(mem, struct at25_data, mem);
+
+	return at25_ee_write(at25, buf, offset, count);
+}
+
+/*-------------------------------------------------------------------------*/
+
 static int at25_probe(struct spi_device *spi)
 {
 	struct at25_data	*at25 = NULL;
@@ -317,6 +338,10 @@ static int at25_probe(struct spi_device *spi)
 	at25->addrlen = addrlen;
 
 	/* Export the EEPROM bytes through sysfs, since that's convenient.
+	 * And maybe to other kernel code; it might hold a board's Ethernet
+	 * address, or board-specific calibration data generated on the
+	 * manufacturing floor.
+	 *
 	 * Default to root-only access to the data; EEPROMs often hold data
 	 * that's sensitive for read and/or write, like ethernet addresses,
 	 * security codes, board-specific manufacturing calibrations, etc.
@@ -324,17 +349,22 @@ static int at25_probe(struct spi_device *spi)
 	at25->bin.attr.name = "eeprom";
 	at25->bin.attr.mode = S_IRUSR;
 	at25->bin.read = at25_bin_read;
+	at25->mem.read = at25_mem_read;
 
 	at25->bin.size = at25->chip.byte_len;
 	if (!(chip->flags & EE_READONLY)) {
 		at25->bin.write = at25_bin_write;
 		at25->bin.attr.mode |= S_IWUSR;
+		at25->mem.write = at25_mem_write;
 	}
 
 	err = sysfs_create_bin_file(&spi->dev.kobj, &at25->bin);
 	if (err)
 		goto fail;
 
+	if (chip->setup)
+		chip->setup(&at25->mem, chip->context);
+
 	dev_info(&spi->dev, "%Zd %s %s eeprom%s, pagesize %u\n",
 		(at25->bin.size < 1024)
 			? at25->bin.size