summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-01-14 09:07:57 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2013-01-14 09:07:57 -0800
commit46fed0a57cd2b1022b556394ef586632a5b2e4e7 (patch)
treeec12490668d2100a5f608c1513515028d847b2c0 /drivers
parent3441f0d26d02ec8073ea9ac7d1a4da8a9818ad59 (diff)
parent8cf65dc386f3634a43312f436cc7a935476a40c4 (diff)
Merge tag 'usb-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman: "Here are a bunch of USB fixes for your 3.8-rc3 tree. They all either fix problems that have been reported (like the xhci/hub changes) or add new device ids to existing drivers. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits) usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid added usb: host: ohci-tmio: fix compile warning USB: Add device quirk for Microsoft VX700 webcam USB: ehci-fsl: fix regression on mpc5121e usb: chipidea: Allow disabling streaming not only in udc mode USB: fsl-mph-dr-of: fix regression on mpc5121e USB: select USB_ARCH_HAS_EHCI for MXS USB: hub: handle claim of enabled remote wakeup after reset USB: cdc-acm: Add support for "PSC Scanning, Magellan 800i" USB: option: add Nexpring NP10T terminal id USB: option: add Telekom Speedstick LTE II USB: option: blacklist network interface on ZTE MF880 usb: imx21-hcd: Include missing linux/module.h USB: option: Add new MEDIATEK PID support USB: ehci: make debug port in-use detection functional again USB: usbtest: fix test number in log message xhci: Avoid "dead ports", add roothub port polling. USB: Handle warm reset failure on empty port. USB: Ignore port state until reset completes. USB: Increase reset timeout. ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/Kconfig1
-rw-r--r--drivers/usb/chipidea/host.c3
-rw-r--r--drivers/usb/class/cdc-acm.c3
-rw-r--r--drivers/usb/core/hub.c120
-rw-r--r--drivers/usb/core/quirks.c3
-rw-r--r--drivers/usb/dwc3/debugfs.c2
-rw-r--r--drivers/usb/gadget/amd5536udc.c4
-rw-r--r--drivers/usb/gadget/dummy_hcd.c9
-rw-r--r--drivers/usb/gadget/mv_udc_core.c4
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c5
-rw-r--r--drivers/usb/gadget/tcm_usb_gadget.c3
-rw-r--r--drivers/usb/gadget/u_serial.c2
-rw-r--r--drivers/usb/host/ehci-fsl.c9
-rw-r--r--drivers/usb/host/ehci-mv.c4
-rw-r--r--drivers/usb/host/ehci-pci.c39
-rw-r--r--drivers/usb/host/fsl-mph-dr-of.c3
-rw-r--r--drivers/usb/host/imx21-hcd.c1
-rw-r--r--drivers/usb/host/ohci-tmio.c3
-rw-r--r--drivers/usb/host/xhci-hub.c38
-rw-r--r--drivers/usb/host/xhci-mem.c2
-rw-r--r--drivers/usb/host/xhci-ring.c9
-rw-r--r--drivers/usb/host/xhci.c10
-rw-r--r--drivers/usb/misc/usbtest.c2
-rw-r--r--drivers/usb/musb/musb_core.c5
-rw-r--r--drivers/usb/musb/musb_dsps.c5
-rw-r--r--drivers/usb/otg/Kconfig2
-rw-r--r--drivers/usb/otg/mv_otg.c4
-rw-r--r--drivers/usb/renesas_usbhs/mod_gadget.c22
-rw-r--r--drivers/usb/renesas_usbhs/mod_host.c3
-rw-r--r--drivers/usb/serial/ftdi_sio.c2
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h6
-rw-r--r--drivers/usb/serial/option.c18
32 files changed, 257 insertions, 89 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 4c90b510d01..640ae6c6d2d 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -37,6 +37,7 @@ config USB_ARCH_HAS_EHCI
default y if ARCH_W90X900
default y if ARCH_AT91
default y if ARCH_MXC
+ default y if ARCH_MXS
default y if ARCH_OMAP3
default y if ARCH_CNS3XXX
default y if ARCH_VT8500
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index caecad9213f..8e9d31277c4 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -70,6 +70,9 @@ static int host_start(struct ci13xxx *ci)
else
ci->hcd = hcd;
+ if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING)
+ hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
+
return ret;
}
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 8d809a811e1..2d92cce260d 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1602,6 +1602,9 @@ static const struct usb_device_id acm_ids[] = {
{ USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */
.driver_info = NO_UNION_NORMAL,
},
+ { USB_DEVICE(0x05f9, 0x4002), /* PSC Scanning, Magellan 800i */
+ .driver_info = NO_UNION_NORMAL,
+ },
{ USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
},
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a815fd2cc5e..957ed2c4148 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -877,6 +877,60 @@ static int hub_hub_status(struct usb_hub *hub,
return ret;
}
+static int hub_set_port_link_state(struct usb_hub *hub, int port1,
+ unsigned int link_status)
+{
+ return set_port_feature(hub->hdev,
+ port1 | (link_status << 3),
+ USB_PORT_FEAT_LINK_STATE);
+}
+
+/*
+ * If USB 3.0 ports are placed into the Disabled state, they will no longer
+ * detect any device connects or disconnects. This is generally not what the
+ * USB core wants, since it expects a disabled port to produce a port status
+ * change event when a new device connects.
+ *
+ * Instead, set the link state to Disabled, wait for the link to settle into
+ * that state, clear any change bits, and then put the port into the RxDetect
+ * state.
+ */
+static int hub_usb3_port_disable(struct usb_hub *hub, int port1)
+{
+ int ret;
+ int total_time;
+ u16 portchange, portstatus;
+
+ if (!hub_is_superspeed(hub->hdev))
+ return -EINVAL;
+
+ ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
+ if (ret) {
+ dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
+ port1, ret);
+ return ret;
+ }
+
+ /* Wait for the link to enter the disabled state. */
+ for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
+ ret = hub_port_status(hub, port1, &portstatus, &portchange);
+ if (ret < 0)
+ return ret;
+
+ if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_SS_DISABLED)
+ break;
+ if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+ break;
+ msleep(HUB_DEBOUNCE_STEP);
+ }
+ if (total_time >= HUB_DEBOUNCE_TIMEOUT)
+ dev_warn(hub->intfdev, "Could not disable port %d after %d ms\n",
+ port1, total_time);
+
+ return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT);
+}
+
static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
{
struct usb_device *hdev = hub->hdev;
@@ -885,8 +939,13 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
if (hub->ports[port1 - 1]->child && set_state)
usb_set_device_state(hub->ports[port1 - 1]->child,
USB_STATE_NOTATTACHED);
- if (!hub->error && !hub_is_superspeed(hub->hdev))
- ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
+ if (!hub->error) {
+ if (hub_is_superspeed(hub->hdev))
+ ret = hub_usb3_port_disable(hub, port1);
+ else
+ ret = clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_ENABLE);
+ }
if (ret)
dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
port1, ret);
@@ -2440,7 +2499,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
#define HUB_SHORT_RESET_TIME 10
#define HUB_BH_RESET_TIME 50
#define HUB_LONG_RESET_TIME 200
-#define HUB_RESET_TIMEOUT 500
+#define HUB_RESET_TIMEOUT 800
static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm);
@@ -2475,6 +2534,10 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
if (ret < 0)
return ret;
+ /* The port state is unknown until the reset completes. */
+ if ((portstatus & USB_PORT_STAT_RESET))
+ goto delay;
+
/*
* Some buggy devices require a warm reset to be issued even
* when the port appears not to be connected.
@@ -2520,11 +2583,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
if ((portchange & USB_PORT_STAT_C_CONNECTION))
return -ENOTCONN;
- /* if we`ve finished resetting, then break out of
- * the loop
- */
- if (!(portstatus & USB_PORT_STAT_RESET) &&
- (portstatus & USB_PORT_STAT_ENABLE)) {
+ if ((portstatus & USB_PORT_STAT_ENABLE)) {
if (hub_is_wusb(hub))
udev->speed = USB_SPEED_WIRELESS;
else if (hub_is_superspeed(hub->hdev))
@@ -2538,10 +2597,15 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
return 0;
}
} else {
- if (portchange & USB_PORT_STAT_C_BH_RESET)
- return 0;
+ if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+ hub_port_warm_reset_required(hub,
+ portstatus))
+ return -ENOTCONN;
+
+ return 0;
}
+delay:
/* switch to the long delay after two short delay failures */
if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
delay = HUB_LONG_RESET_TIME;
@@ -2565,14 +2629,11 @@ static void hub_port_finish_reset(struct usb_hub *hub, int port1,
msleep(10 + 40);
update_devnum(udev, 0);
hcd = bus_to_hcd(udev->bus);
- if (hcd->driver->reset_device) {
- *status = hcd->driver->reset_device(hcd, udev);
- if (*status < 0) {
- dev_err(&udev->dev, "Cannot reset "
- "HCD device state\n");
- break;
- }
- }
+ /* The xHC may think the device is already reset,
+ * so ignore the status.
+ */
+ if (hcd->driver->reset_device)
+ hcd->driver->reset_device(hcd, udev);
}
/* FALL THROUGH */
case -ENOTCONN:
@@ -2580,16 +2641,16 @@ static void hub_port_finish_reset(struct usb_hub *hub, int port1,
clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_C_RESET);
/* FIXME need disconnect() for NOTATTACHED device */
- if (warm) {
+ if (hub_is_superspeed(hub->hdev)) {
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_BH_PORT_RESET);
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_PORT_LINK_STATE);
- } else {
+ }
+ if (!warm)
usb_set_device_state(udev, *status
? USB_STATE_NOTATTACHED
: USB_STATE_DEFAULT);
- }
break;
}
}
@@ -2939,7 +3000,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
static int finish_port_resume(struct usb_device *udev)
{
int status = 0;
- u16 devstatus;
+ u16 devstatus = 0;
/* caller owns the udev device lock */
dev_dbg(&udev->dev, "%s\n",
@@ -2984,7 +3045,13 @@ static int finish_port_resume(struct usb_device *udev)
if (status) {
dev_dbg(&udev->dev, "gone after usb resume? status %d\n",
status);
- } else if (udev->actconfig) {
+ /*
+ * There are a few quirky devices which violate the standard
+ * by claiming to have remote wakeup enabled after a reset,
+ * which crash if the feature is cleared, hence check for
+ * udev->reset_resume
+ */
+ } else if (udev->actconfig && !udev->reset_resume) {
le16_to_cpus(&devstatus);
if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
status = usb_control_msg(udev,
@@ -4638,9 +4705,14 @@ static void hub_events(void)
* SS.Inactive state.
*/
if (hub_port_warm_reset_required(hub, portstatus)) {
+ int status;
+
dev_dbg(hub_dev, "warm reset port %d\n", i);
- hub_port_reset(hub, i, NULL,
+ status = hub_port_reset(hub, i, NULL,
HUB_BH_RESET_TIME, true);
+ if (status < 0)
+ hub_port_disable(hub, i, 1);
+ connect_change = 0;
}
if (connect_change)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index fdefd9c7f7a..3113c1d7144 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -43,6 +43,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Microsoft LifeCam-VX700 v2.0 */
+ { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Logitech Quickcam Fusion */
{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index 92604b4f971..5945aadaa1c 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -56,7 +56,7 @@
#define dump_register(nm) \
{ \
.name = __stringify(nm), \
- .offset = DWC3_ ##nm, \
+ .offset = DWC3_ ##nm - DWC3_GLOBALS_REGS_START, \
}
static const struct debugfs_reg32 dwc3_regs[] = {
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index fc0ec5e0d58..d9f6b937249 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -3231,7 +3231,7 @@ static int udc_pci_probe(
}
if (!pdev->irq) {
- dev_err(&dev->pdev->dev, "irq not set\n");
+ dev_err(&pdev->dev, "irq not set\n");
kfree(dev);
dev = NULL;
retval = -ENODEV;
@@ -3250,7 +3250,7 @@ static int udc_pci_probe(
dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
- dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq);
+ dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
kfree(dev);
dev = NULL;
retval = -EBUSY;
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 95d584dbed1..8cf0c0f6fa1 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -130,10 +130,7 @@ static const char ep0name[] = "ep0";
static const char *const ep_name[] = {
ep0name, /* everyone has ep0 */
- /* act like a net2280: high speed, six configurable endpoints */
- "ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f",
-
- /* or like pxa250: fifteen fixed function endpoints */
+ /* act like a pxa250: fifteen fixed function endpoints */
"ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int",
"ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int",
"ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso",
@@ -141,6 +138,10 @@ static const char *const ep_name[] = {
/* or like sa1100: two fixed function endpoints */
"ep1out-bulk", "ep2in-bulk",
+
+ /* and now some generic EPs so we have enough in multi config */
+ "ep3out", "ep4in", "ep5out", "ep6out", "ep7in", "ep8out", "ep9in",
+ "ep10out", "ep11out", "ep12in", "ep13out", "ep14in", "ep15out",
};
#define DUMMY_ENDPOINTS ARRAY_SIZE(ep_name)
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 379aac7b82f..6e8b1272ebc 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -1012,7 +1012,7 @@ static void udc_clock_enable(struct mv_udc *udc)
unsigned int i;
for (i = 0; i < udc->clknum; i++)
- clk_enable(udc->clk[i]);
+ clk_prepare_enable(udc->clk[i]);
}
static void udc_clock_disable(struct mv_udc *udc)
@@ -1020,7 +1020,7 @@ static void udc_clock_disable(struct mv_udc *udc)
unsigned int i;
for (i = 0; i < udc->clknum; i++)
- clk_disable(udc->clk[i]);
+ clk_disable_unprepare(udc->clk[i]);
}
static void udc_stop(struct mv_udc *udc)
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 141971d9051..439c3f972f8 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -3477,12 +3477,11 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
/**
* s3c_hsotg_release - release callback for hsotg device
* @dev: Device to for which release is called
+ *
+ * Nothing to do as the resource is allocated using devm_ API.
*/
static void s3c_hsotg_release(struct device *dev)
{
- struct s3c_hsotg *hsotg = dev_get_drvdata(dev);
-
- kfree(hsotg);
}
/**
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index 4f7f76f00c7..7cacd6ae818 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -1794,9 +1794,10 @@ static int tcm_usbg_drop_nexus(struct usbg_tpg *tpg)
tpg->tpg_nexus = NULL;
kfree(tv_nexus);
+ ret = 0;
out:
mutex_unlock(&tpg->tpg_mutex);
- return 0;
+ return ret;
}
static ssize_t tcm_usbg_tpg_store_nexus(
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index d0f95482f40..598dcc1212f 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -887,7 +887,7 @@ static void gs_close(struct tty_struct *tty, struct file *file)
pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
port->port_num, tty, file);
- wake_up_interruptible(&port->port.close_wait);
+ wake_up(&port->port.close_wait);
exit:
spin_unlock_irq(&port->port_lock);
}
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index fd9b5424b86..d81d2fcbff1 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -230,7 +230,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
switch (phy_mode) {
case FSL_USB2_PHY_ULPI:
- if (pdata->controller_ver) {
+ if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
setbits32(non_ehci + FSL_SOC_USB_CTRL,
ULPI_PHY_CLK_SEL);
@@ -251,7 +251,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
portsc |= PORT_PTS_PTW;
/* fall through */
case FSL_USB2_PHY_UTMI:
- if (pdata->controller_ver) {
+ if (pdata->have_sysif_regs && pdata->controller_ver) {
/* controller version 1.6 or above */
setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
@@ -267,7 +267,8 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
break;
}
- if (pdata->controller_ver && (phy_mode == FSL_USB2_PHY_ULPI)) {
+ if (pdata->have_sysif_regs && pdata->controller_ver &&
+ (phy_mode == FSL_USB2_PHY_ULPI)) {
/* check PHY_CLK_VALID to get phy clk valid */
if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) {
@@ -278,7 +279,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
- if (phy_mode != FSL_USB2_PHY_ULPI)
+ if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);
return 0;
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index f7bfc0b898b..6c56297ea16 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -43,7 +43,7 @@ static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
unsigned int i;
for (i = 0; i < ehci_mv->clknum; i++)
- clk_enable(ehci_mv->clk[i]);
+ clk_prepare_enable(ehci_mv->clk[i]);
}
static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
@@ -51,7 +51,7 @@ static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
unsigned int i;
for (i = 0; i < ehci_mv->clknum; i++)
- clk_disable(ehci_mv->clk[i]);
+ clk_disable_unprepare(ehci_mv->clk[i]);
}
static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index dabb2049482..170b9399e09 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -200,6 +200,26 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
break;
}
+ /* optional debug port, normally in the first BAR */
+ temp = pci_find_capability(pdev, PCI_CAP_ID_DBG);
+ if (temp) {
+ pci_read_config_dword(pdev, temp, &temp);
+ temp >>= 16;
+ if (((temp >> 13) & 7) == 1) {
+ u32 hcs_params = ehci_readl(ehci,
+ &ehci->caps->hcs_params);
+
+ temp &= 0x1fff;
+ ehci->debug = hcd->regs + temp;
+ temp = ehci_readl(ehci, &ehci->debug->control);
+ ehci_info(ehci, "debug port %d%s\n",
+ HCS_DEBUG_PORT(hcs_params),
+ (temp & DBGP_ENABLED) ? " IN USE" : "");
+ if (!(temp & DBGP_ENABLED))
+ ehci->debug = NULL;
+ }
+ }
+
retval = ehci_setup(hcd);
if (retval)
return retval;
@@ -228,25 +248,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
break;
}
- /* optional debug port, normally in the first BAR */
- temp = pci_find_capability(pdev, 0x0a);
- if (temp) {
- pci_read_config_dword(pdev, temp, &temp);
- temp >>= 16;
- if ((temp & (3 << 13)) == (1 << 13)) {
- temp &= 0x1fff;
- ehci->debug = hcd->regs + temp;
- temp = ehci_readl(ehci, &ehci->debug->control);
- ehci_info(ehci, "debug port %d%s\n",
- HCS_DEBUG_PORT(ehci->hcs_params),
- (temp & DBGP_ENABLED)
- ? " IN USE"
- : "");
- if (!(temp & DBGP_ENABLED))
- ehci->debug = NULL;
- }
- }
-
/* at least the Genesys GL880S needs fixup here */
temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
temp &= 0x0f;
diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c
index 5105127c1d4..11e0b79ff9d 100644
--- a/drivers/usb/host/fsl-mph-dr-of.c
+++ b/drivers/usb/host/fsl-mph-dr-of.c
@@ -142,6 +142,9 @@ static int usb_get_ver_info(struct device_node *np)
return ver;
}
+ if (of_device_is_compatible(np, "fsl,mpc5121-usb2-dr"))
+ return FSL_USB_VER_OLD;
+
if (of_device_is_compatible(np, "fsl-usb2-mph")) {
if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6"))
ver = FSL_USB_VER_1_6;
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index bd6a7447ccc..f0ebe8e7c58 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -58,6 +58,7 @@
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/dma-mapping.h>
+#include <linux/module.h>
#include "imx21-hcd.h"
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index d370245a4ee..5e3a6deb62b 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -128,7 +128,8 @@ static void tmio_start_hc(struct platform_device *dev)
tmio_iowrite8(2, tmio->ccr + CCR_INTC);
dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n",
- tmio_ioread8(tmio->ccr + CCR_REVID), hcd->rsrc_start, hcd->irq);
+ tmio_ioread8(tmio->ccr + CCR_REVID),
+ (u64) hcd->rsrc_start, hcd->irq);
}
static int ohci_tmio_start(struct usb_hcd *hcd)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a686cf4905b..68914429482 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -761,12 +761,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
break;
case USB_PORT_FEAT_LINK_STATE:
temp = xhci_readl(xhci, port_array[wIndex]);
+
+ /* Disable port */
+ if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
+ xhci_dbg(xhci, "Disable port %d\n", wIndex);
+ temp = xhci_port_state_to_neutral(temp);
+ /*
+ * Clear all change bits, so that we get a new
+ * connection event.
+ */
+ temp |= PORT_CSC | PORT_PEC | PORT_WRC |
+ PORT_OCC | PORT_RC | PORT_PLC |
+ PORT_CEC;
+ xhci_writel(xhci, temp | PORT_PE,
+ port_array[wIndex]);
+ temp = xhci_readl(xhci, port_array[wIndex]);
+ break;
+ }
+
+ /* Put link in RxDetect (enable port) */
+ if (link_state == USB_SS_PORT_LS_RX_DETECT) {
+ xhci_dbg(xhci, "Enable port %d\n", wIndex);
+ xhci_set_link_state(xhci, port_array, wIndex,
+ link_state);
+ temp = xhci_readl(xhci, port_array[wIndex]);
+ break;
+ }
+
/* Software should not attempt to set
- * port link state above '5' (Rx.Detect) and the port
+ * port link state above '3' (U3) and the port
* must be enabled.
*/
if ((temp & PORT_PE) == 0 ||
- (link_state > USB_SS_PORT_LS_RX_DETECT)) {
+ (link_state > USB_SS_PORT_LS_U3)) {
xhci_warn(xhci, "Cannot set link state.\n");
goto error;
}
@@ -957,6 +984,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
int max_ports;
__le32 __iomem **port_array;
struct xhci_bus_state *bus_state;
+ bool reset_change = false;
max_ports = xhci_get_ports(hcd, &port_array);
bus_state = &xhci->bus_state[hcd_index(hcd)];
@@ -988,6 +1016,12 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
status = 1;
}
+ if ((temp & PORT_RC))
+ reset_change = true;
+ }
+ if (!status && !reset_change) {
+ xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
}
spin_unlock_irqrestore(&xhci->lock, flags);
return status ? retval : 0;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fb51c7085ad..35616ffbe3a 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1250,6 +1250,8 @@ static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
+ if (ep->desc.bInterval == 0)
+ return 0;
return xhci_microframes_to_exponent(udev, ep,
ep->desc.bInterval, 0, 15);
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index cbb44b7b9d6..59fb5c677db 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1725,6 +1725,15 @@ cleanup:
if (bogus_port_status)
return;
+ /*
+ * xHCI port-status-change events occur when the "or" of all the
+ * status-change bits in the portsc register changes from 0 to 1.
+ * New status changes won't cause an event if any other change
+ * bits are still set. When an event occurs, switch over to
+ * polling to avoid losing status changes.
+ */
+ xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
spin_unlock(&xhci->lock);
/* Pass this up to the core */
usb_hcd_poll_rh_status(hcd);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5c72c431bab..f1f01a834ba 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -884,6 +884,11 @@ int xhci_suspend(struct xhci_hcd *xhci)
xhci->shared_hcd->state != HC_STATE_SUSPENDED)
return -EINVAL;
+ /* Don't poll the roothubs on bus suspend. */
+ xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ del_timer_sync(&hcd->rh_timer);
+
spin_lock_irq(&xhci->lock);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
@@ -1069,6 +1074,11 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
compliance_mode_recovery_timer_init(xhci);
+ /* Re-enable port polling. */
+ xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ usb_hcd_poll_rh_status(hcd);
+
return retval;
}
#endif /* CONFIG_PM */
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 7667b12f2ff..268148de971 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -2179,7 +2179,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
if (dev->out_pipe == 0 || !param->length || param->sglen < 4)
break;
retval = 0;
- dev_info(&intf->dev, "TEST 17: unlink from %d queues of "
+ dev_info(&intf->dev, "TEST 24: unlink from %d queues of "
"%d %d-byte writes\n",
param->iterations, param->sglen, param->length);
for (i = param->iterations; retval == 0 && i > 0; --i) {
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index f1c6c5470b9..fd3486745e6 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2298,10 +2298,7 @@ static int __init musb_init(void)
if (usb_disabled())
return 0;
- pr_info("%s: version " MUSB_VERSION ", "
- "?dma?"
- ", "
- "otg (peripheral+host)",
+ pr_info("%s: version " MUSB_VERSION ", ?dma?, otg (peripheral+host)\n",
musb_driver_name);
return platform_driver_register(&musb_driver);
}
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index e6f2ae8368b..f7d764de6fd 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -134,6 +134,11 @@ static const resource_size_t dsps_control_module_phys[] = {
DSPS_AM33XX_CONTROL_MODULE_PHYS_1,
};
+#define USBPHY_CM_PWRDN (1 << 0)
+#define USBPHY_OTG_PWRDN (1 << 1)
+#define USBPHY_OTGVDET_EN (1 << 19)
+#define USBPHY_OTGSESSEND_EN (1 << 20)
+
/**
* musb_dsps_phy_control - phy on/off
* @glue: struct dsps_glue *
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 6223062d5d1..37962c99ff1 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -110,7 +110,7 @@ config AB8500_USB
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
- depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND
+ depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
select USB_OTG
select USB_OTG_UTILS
help
diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c
index 1dd57504186..eace975991a 100644
--- a/drivers/usb/otg/mv_otg.c
+++ b/drivers/usb/otg/mv_otg.c
@@ -240,7 +240,7 @@ static void otg_clock_enable(struct mv_otg *mvotg)
unsigned int i;
for (i = 0; i < mvotg->clknum; i++)
- clk_enable(mvotg->clk[i]);
+ clk_prepare_enable(mvotg->clk[i]);
}
static void otg_clock_disable(struct mv_otg *mvotg)
@@ -248,7 +248,7 @@ static void otg_clock_disable(struct mv_otg *mvotg)
unsigned int i;
for (i = 0; i < mvotg->clknum; i++)
- clk_disable(mvotg->clk[i]);
+ clk_disable_unprepare(mvotg->clk[i]);
}
static int mv_otg_enable_internal(struct mv_otg *mvotg)
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index dd41f61893e..f2985cd8802 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -545,15 +545,6 @@ static int usbhsg_pipe_disable(struct usbhsg_uep *uep)
return 0;
}
-static void usbhsg_uep_init(struct usbhsg_gpriv *gpriv)
-{
- int i;
- struct usbhsg_uep *uep;
-
- usbhsg_for_each_uep_with_dcp(uep, gpriv, i)
- uep->pipe = NULL;
-}
-
/*
*
* usb_ep_ops
@@ -610,7 +601,12 @@ static int usbhsg_ep_disable(struct usb_ep *ep)
{
struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
- return usbhsg_pipe_disable(uep);
+ usbhsg_pipe_disable(uep);
+
+ uep->pipe->mod_private = NULL;
+ uep->pipe = NULL;
+
+ return 0;
}
static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep,
@@ -761,9 +757,8 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
usbhs_pipe_init(priv,
usbhsg_dma_map_ctrl);
usbhs_fifo_init(priv);
- usbhsg_uep_init(gpriv);
- /* dcp init */
+ /* dcp init instead of usbhsg_ep_enable() */
dcp->pipe = usbhs_dcp_malloc(priv);
dcp->pipe->mod_private = dcp;
usbhs_pipe_config_update(dcp->pipe, 0, 0, 64);
@@ -825,7 +820,7 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status)
usbhs_sys_set_test_mode(priv, 0);
usbhs_sys_function_ctrl(priv, 0);
- usbhsg_pipe_disable(dcp);
+ usbhsg_ep_disable(&dcp->ep);
dev_dbg(dev, "stop gadget\n");
@@ -998,6 +993,7 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv)
*/
usbhsg_for_each_uep_with_dcp(uep, gpriv, i) {
uep->gpriv = gpriv;
+ uep->pipe = NULL;
snprintf(uep->ep_name, EP_NAME_SIZE, "ep%d", i);
uep->ep.name = uep->ep_name;
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index 3d3cd6ca268..b86815421c8 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -661,9 +661,10 @@ static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
status = -ESHUTDOWN;
urb->actual_length = pkt->actual;
- usbhsh_ureq_free(hpriv, ureq);
usbhsh_endpoint_sequence_save(hpriv, urb, pkt);
+ usbhsh_ureq_free(hpriv, ureq);
+
usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep));
usb_hcd_unlink_urb_from_ep(hcd, urb);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0a373b3ae96..ba68835d06a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -875,6 +875,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
+ /* Crucible Devices */
+ { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 049b6e715fa..fa5d5603827 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1259,3 +1259,9 @@
* ATI command output: Cinterion MC55i
*/
#define FTDI_CINTERION_MC55I_PID 0xA951
+
+/*
+ * Product: Comet Caller ID decoder
+ * Manufacturer: Crucible Technologies
+ */
+#define FTDI_CT_COMET_PID 0x8e08
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e6f87b76c71..478adcfcdf2 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -288,6 +288,7 @@ static void option_instat_callback(struct urb *urb);
#define ALCATEL_VENDOR_ID 0x1bbb
#define ALCATEL_PRODUCT_X060S_X200 0x0000
#define ALCATEL_PRODUCT_X220_X500D 0x0017
+#define ALCATEL_PRODUCT_L100V 0x011e
#define PIRELLI_VENDOR_ID 0x1266
#define PIRELLI_PRODUCT_C100_1 0x1002
@@ -429,9 +430,12 @@ static void option_instat_callback(struct urb *urb);
#define MEDIATEK_VENDOR_ID 0x0e8d
#define MEDIATEK_PRODUCT_DC_1COM 0x00a0
#define MEDIATEK_PRODUCT_DC_4COM 0x00a5
+#define MEDIATEK_PRODUCT_DC_4COM2 0x00a7
#define MEDIATEK_PRODUCT_DC_5COM 0x00a4
#define MEDIATEK_PRODUCT_7208_1COM 0x7101
#define MEDIATEK_PRODUCT_7208_2COM 0x7102
+#define MEDIATEK_PRODUCT_7103_2COM 0x7103
+#define MEDIATEK_PRODUCT_7106_2COM 0x7106
#define MEDIATEK_PRODUCT_FP_1COM 0x0003
#define MEDIATEK_PRODUCT_FP_2COM 0x0023
#define MEDIATEK_PRODUCT_FPDC_1COM 0x0043
@@ -441,6 +445,10 @@ static void option_instat_callback(struct urb *urb);
#define CELLIENT_VENDOR_ID 0x2692
#define CELLIENT_PRODUCT_MEN200 0x9005
+/* Hyundai Petatel Inc. products */
+#define PETATEL_VENDOR_ID 0x1ff4
+#define PETATEL_PRODUCT_NP10T 0x600e
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
@@ -923,7 +931,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
@@ -1190,6 +1199,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
},
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
@@ -1294,7 +1305,12 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7103_2COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7106_2COM, 0x02, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
+ { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);