Merge tag 'for-v3.18' of git://git.infradead.org/battery-2.6

Pull power supply and reset updates from Sebastian Reichel:
 - Initial support for the following chips
   * max77836 (charger)
   * max14577 (charger)
   * bq27742 (battery gauge)
   * ltc2952 (poweroff)
   * stih416 (restart)
   * syscon-reboot (restart)
   * gpio-restart (restart)
 - cleanup of power supply core
 - misc fixes in power supply and reset drivers

* tag 'for-v3.18' of git://git.infradead.org/battery-2.6: (48 commits)
  power: ab8500_fg: Fix build warning
  Documentation: charger: max14577: Update the date of introducing ABI
  power: reset: corrections for simple syscon reboot driver
  Documentation: power: reset: Add documentation for generic SYSCON reboot driver
  power: reset: Add generic SYSCON register mapped reset
  bq27x00_battery: Fix flag reading for bq27742
  power: reset: use restart_notifier mechanism for msm-poweroff
  power: Add simple gpio-restart driver
  power: reset: st: Provide DT bindings for ST's Power Reset driver
  power: reset: Add restart functionality for STiH41x platforms
  power: charger-manager: Fix NULL pointer exception with missing cm-fuel-gauge
  power: max14577: Fix circular config SYSFS dependency
  power: gpio-charger: do not use gpio value directly
  power: max8925: Use of_get_child_by_name
  power: max8925: Fix NULL ptr dereference on memory allocation failure
  bq27x00_battery: Add support to bq27742
  Documentation: charger: max14577: Document exported sysfs entry
  devicetree: mfd: max14577: Add device tree bindings document
  power: max17040: Add ID for MAX77836 Fuel Gauge block
  charger: max14577: Configure battery-dependent settings from DTS and sysfs
  ...

Conflicts:
	drivers/power/reset/Kconfig
	drivers/power/reset/Makefile

22 files changed, 1532 insertions, 221 deletions

diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c
index 4a5e885383f..b8af263be59 100644
--- a/drivers/mfd/max14577.c
+++ b/drivers/mfd/max14577.c
@@ -26,6 +26,87 @@
 #include <linux/mfd/max14577.h>
 #include <linux/mfd/max14577-private.h>
 
+/*
+ * Table of valid charger currents for different Maxim chipsets.
+ * It is placed here because it is used by both charger and regulator driver.
+ */
+const struct maxim_charger_current maxim_charger_currents[] = {
+	[MAXIM_DEVICE_TYPE_UNKNOWN] = { 0, 0, 0, 0 },
+	[MAXIM_DEVICE_TYPE_MAX14577] = {
+		.min		= MAX14577_CHARGER_CURRENT_LIMIT_MIN,
+		.high_start	= MAX14577_CHARGER_CURRENT_LIMIT_HIGH_START,
+		.high_step	= MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP,
+		.max		= MAX14577_CHARGER_CURRENT_LIMIT_MAX,
+	},
+	[MAXIM_DEVICE_TYPE_MAX77836] = {
+		.min		= MAX77836_CHARGER_CURRENT_LIMIT_MIN,
+		.high_start	= MAX77836_CHARGER_CURRENT_LIMIT_HIGH_START,
+		.high_step	= MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP,
+		.max		= MAX77836_CHARGER_CURRENT_LIMIT_MAX,
+	},
+};
+EXPORT_SYMBOL_GPL(maxim_charger_currents);
+
+/*
+ * maxim_charger_calc_reg_current - Calculate register value for current
+ * @limits:	constraints for charger, matching the MBCICHWRC register
+ * @min_ua:	minimal requested current, micro Amps
+ * @max_ua:	maximum requested current, micro Amps
+ * @dst:	destination to store calculated register value
+ *
+ * Calculates the value of MBCICHWRC (Fast Battery Charge Current) register
+ * for given current and stores it under pointed 'dst'. The stored value
+ * combines low bit (MBCICHWRCL) and high bits (MBCICHWRCH). It is also
+ * properly shifted.
+ *
+ * The calculated register value matches the current which:
+ *  - is always between <limits.min, limits.max>;
+ *  - is always less or equal to max_ua;
+ *  - is the highest possible value;
+ *  - may be lower than min_ua.
+ *
+ * On success returns 0. On error returns -EINVAL (requested min/max current
+ * is outside of given charger limits) and 'dst' is not set.
+ */
+int maxim_charger_calc_reg_current(const struct maxim_charger_current *limits,
+		unsigned int min_ua, unsigned int max_ua, u8 *dst)
+{
+	unsigned int current_bits = 0xf;
+
+	if (min_ua > max_ua)
+		return -EINVAL;
+
+	if (min_ua > limits->max || max_ua < limits->min)
+		return -EINVAL;
+
+	if (max_ua < limits->high_start) {
+		/*
+		 * Less than high_start, so set the minimal current
+		 * (turn Low Bit off, 0 as high bits).
+		 */
+		*dst = 0x0;
+		return 0;
+	}
+
+	/* max_ua is in range: <high_start, infinite>, cut it to limits.max */
+	max_ua = min(limits->max, max_ua);
+	max_ua -= limits->high_start;
+	/*
+	 * There is no risk of overflow 'max_ua' here because:
+	 *  - max_ua >= limits.high_start
+	 *  - BUILD_BUG checks that 'limits' are: max >= high_start + high_step
+	 */
+	current_bits = max_ua / limits->high_step;
+
+	/* Turn Low Bit on (use range <limits.high_start, limits.max>) ... */
+	*dst = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
+	/* and set proper High Bits */
+	*dst |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(maxim_charger_calc_reg_current);
+
 static const struct mfd_cell max14577_devs[] = {
 	{
 		.name = "max14577-muic",
@@ -35,7 +116,10 @@ static const struct mfd_cell max14577_devs[] = {
 		.name = "max14577-regulator",
 		.of_compatible = "maxim,max14577-regulator",
 	},
-	{ .name = "max14577-charger", },
+	{
+		.name = "max14577-charger",
+		.of_compatible = "maxim,max14577-charger",
+	},
 };
 
 static const struct mfd_cell max77836_devs[] = {
@@ -463,6 +547,20 @@ static int __init max14577_i2c_init(void)
 	BUILD_BUG_ON(ARRAY_SIZE(max14577_i2c_id) != MAXIM_DEVICE_TYPE_NUM);
 	BUILD_BUG_ON(ARRAY_SIZE(max14577_dt_match) != MAXIM_DEVICE_TYPE_NUM);
 
+	/* Valid charger current values must be provided for each chipset */
+	BUILD_BUG_ON(ARRAY_SIZE(maxim_charger_currents) != MAXIM_DEVICE_TYPE_NUM);
+
+	/* Check for valid values for charger */
+	BUILD_BUG_ON(MAX14577_CHARGER_CURRENT_LIMIT_HIGH_START +
+			MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP * 0xf !=
+			MAX14577_CHARGER_CURRENT_LIMIT_MAX);
+	BUILD_BUG_ON(MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP == 0);
+
+	BUILD_BUG_ON(MAX77836_CHARGER_CURRENT_LIMIT_HIGH_START +
+			MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP * 0xf !=
+			MAX77836_CHARGER_CURRENT_LIMIT_MAX);
+	BUILD_BUG_ON(MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP == 0);
+
 	return i2c_add_driver(&max14577_i2c_driver);
 }
 subsys_initcall(max14577_i2c_init);
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 73cfcdf28a3..0108c2af005 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -325,11 +325,12 @@ config CHARGER_MANAGER
           with help of suspend_again support.
 
 config CHARGER_MAX14577
-	tristate "Maxim MAX14577 MUIC battery charger driver"
+	tristate "Maxim MAX14577/77836 battery charger driver"
 	depends on MFD_MAX14577
+	depends on SYSFS
 	help
 	  Say Y to enable support for the battery charger control sysfs and
-	  platform data of MAX14577 MUICs.
+	  platform data of MAX14577/77836 MUICs.
 
 config CHARGER_MAX8997
 	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index 3cb4178e397..217da4b2ca8 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -2969,7 +2969,7 @@ static struct device_attribute ab8505_fg_sysfs_psy_attrs[] = {
 
 static int ab8500_fg_sysfs_psy_create_attrs(struct device *dev)
 {
-	unsigned int i, j;
+	unsigned int i;
 	struct power_supply *psy = dev_get_drvdata(dev);
 	struct ab8500_fg *di;
 
@@ -2978,14 +2978,15 @@ static int ab8500_fg_sysfs_psy_create_attrs(struct device *dev)
 	if (((is_ab8505(di->parent) || is_ab9540(di->parent)) &&
 	     abx500_get_chip_id(dev->parent) >= AB8500_CUT2P0)
 	    || is_ab8540(di->parent)) {
-		for (j = 0; j < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); j++)
-			if (device_create_file(dev, &ab8505_fg_sysfs_psy_attrs[j]))
+		for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++)
+			if (device_create_file(dev,
+					       &ab8505_fg_sysfs_psy_attrs[i]))
 				goto sysfs_psy_create_attrs_failed_ab8505;
 	}
 	return 0;
 sysfs_psy_create_attrs_failed_ab8505:
 	dev_err(dev, "Failed creating sysfs psy attrs for ab8505.\n");
-	while (j--)
+	while (i--)
 		device_remove_file(dev, &ab8505_fg_sysfs_psy_attrs[i]);
 
 	return -EIO;
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index e10763e3a1d..e3bacfe3bcd 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -23,6 +23,7 @@
  * http://focus.ti.com/docs/prod/folders/print/bq27000.html
  * http://focus.ti.com/docs/prod/folders/print/bq27500.html
  * http://www.ti.com/product/bq27425-g1
+ * http://www.ti.com/product/BQ27742-G1
  */
 
 #include <linux/device.h>
@@ -71,6 +72,8 @@
 #define BQ27500_FLAG_FC			BIT(9)
 #define BQ27500_FLAG_OTC		BIT(15)
 
+#define BQ27742_POWER_AVG		0x76
+
 /* bq27425 register addresses are same as bq27x00 addresses minus 4 */
 #define BQ27425_REG_OFFSET		0x04
 #define BQ27425_REG_SOC			0x18 /* Register address plus offset */
@@ -83,7 +86,7 @@ struct bq27x00_access_methods {
 	int (*read)(struct bq27x00_device_info *di, u8 reg, bool single);
 };
 
-enum bq27x00_chip { BQ27000, BQ27500, BQ27425};
+enum bq27x00_chip { BQ27000, BQ27500, BQ27425, BQ27742};
 
 struct bq27x00_reg_cache {
 	int temperature;
@@ -152,6 +155,24 @@ static enum power_supply_property bq27425_battery_props[] = {
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 };
 
+static enum power_supply_property bq27742_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+};
+
 static unsigned int poll_interval = 360;
 module_param(poll_interval, uint, 0644);
 MODULE_PARM_DESC(poll_interval, "battery poll interval in seconds - " \
@@ -176,7 +197,7 @@ static inline int bq27x00_read(struct bq27x00_device_info *di, u8 reg,
  */
 static bool bq27xxx_is_chip_version_higher(struct bq27x00_device_info *di)
 {
-	if (di->chip == BQ27425 || di->chip == BQ27500)
+	if (di->chip == BQ27425 || di->chip == BQ27500 || di->chip == BQ27742)
 		return true;
 	return false;
 }
@@ -189,7 +210,7 @@ static int bq27x00_battery_read_rsoc(struct bq27x00_device_info *di)
 {
 	int rsoc;
 
-	if (di->chip == BQ27500)
+	if (di->chip == BQ27500 || di->chip == BQ27742)
 		rsoc = bq27x00_read(di, BQ27500_REG_SOC, false);
 	else if (di->chip == BQ27425)
 		rsoc = bq27x00_read(di, BQ27425_REG_SOC, false);
@@ -233,9 +254,11 @@ static inline int bq27x00_battery_read_nac(struct bq27x00_device_info *di)
 {
 	int flags;
 	bool is_bq27500 = di->chip == BQ27500;
+	bool is_bq27742 = di->chip == BQ27742;
 	bool is_higher = bq27xxx_is_chip_version_higher(di);
+	bool flags_1b = !(is_bq27500 || is_bq27742);
 
-	flags = bq27x00_read(di, BQ27x00_REG_FLAGS, !is_bq27500);
+	flags = bq27x00_read(di, BQ27x00_REG_FLAGS, flags_1b);
 	if (flags >= 0 && !is_higher && (flags & BQ27000_FLAG_CI))
 		return -ENODATA;
 
@@ -414,13 +437,15 @@ static void bq27x00_update(struct bq27x00_device_info *di)
 	struct bq27x00_reg_cache cache = {0, };
 	bool is_bq27500 = di->chip == BQ27500;
 	bool is_bq27425 = di->chip == BQ27425;
+	bool is_bq27742 = di->chip == BQ27742;
+	bool flags_1b = !(is_bq27500 || is_bq27742);
 
-	cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, !is_bq27500);
+	cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, flags_1b);
 	if ((cache.flags & 0xff) == 0xff)
 		/* read error */
 		cache.flags = -1;
 	if (cache.flags >= 0) {
-		if (!is_bq27500 && !is_bq27425
+		if (!is_bq27500 && !is_bq27425 && !is_bq27742
 				&& (cache.flags & BQ27000_FLAG_CI)) {
 			dev_info(di->dev, "battery is not calibrated! ignoring capacity values\n");
 			cache.capacity = -ENODATA;
@@ -432,7 +457,11 @@ static void bq27x00_update(struct bq27x00_device_info *di)
 			cache.health = -ENODATA;
 		} else {
 			cache.capacity = bq27x00_battery_read_rsoc(di);
-			if (!is_bq27425) {
+			if (is_bq27742)
+				cache.time_to_empty =
+					bq27x00_battery_read_time(di,
+							BQ27x00_REG_TTE);
+			else if (!is_bq27425) {
 				cache.energy = bq27x00_battery_read_energy(di);
 				cache.time_to_empty =
 					bq27x00_battery_read_time(di,
@@ -450,8 +479,14 @@ static void bq27x00_update(struct bq27x00_device_info *di)
 		cache.temperature = bq27x00_battery_read_temperature(di);
 		if (!is_bq27425)
 			cache.cycle_count = bq27x00_battery_read_cyct(di);
-		cache.power_avg =
-			bq27x00_battery_read_pwr_avg(di, BQ27x00_POWER_AVG);
+		if (is_bq27742)
+			cache.power_avg =
+				bq27x00_battery_read_pwr_avg(di,
+						BQ27742_POWER_AVG);
+		else
+			cache.power_avg =
+				bq27x00_battery_read_pwr_avg(di,
+						BQ27x00_POWER_AVG);
 
 		/* We only have to read charge design full once */
 		if (di->charge_design_full <= 0)
@@ -702,6 +737,9 @@ static int bq27x00_powersupply_init(struct bq27x00_device_info *di)
 	if (di->chip == BQ27425) {
 		di->bat.properties = bq27425_battery_props;
 		di->bat.num_properties = ARRAY_SIZE(bq27425_battery_props);
+	} else if (di->chip == BQ27742) {
+		di->bat.properties = bq27742_battery_props;
+		di->bat.num_properties = ARRAY_SIZE(bq27742_battery_props);
 	} else {
 		di->bat.properties = bq27x00_battery_props;
 		di->bat.num_properties = ARRAY_SIZE(bq27x00_battery_props);
@@ -858,6 +896,7 @@ static const struct i2c_device_id bq27x00_id[] = {
 	{ "bq27200", BQ27000 },	/* bq27200 is same as bq27000, but with i2c */
 	{ "bq27500", BQ27500 },
 	{ "bq27425", BQ27425 },
+	{ "bq27742", BQ27742 },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, bq27x00_id);
diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index 9e4dab46eef..7098a1ce2d3 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -1656,7 +1656,7 @@ static inline struct charger_desc *cm_get_drv_data(struct platform_device *pdev)
 {
 	if (pdev->dev.of_node)
 		return of_cm_parse_desc(&pdev->dev);
-	return (struct charger_desc *)dev_get_platdata(&pdev->dev);
+	return dev_get_platdata(&pdev->dev);
 }
 
 static int charger_manager_probe(struct platform_device *pdev)
@@ -1677,7 +1677,7 @@ static int charger_manager_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (!desc) {
+	if (IS_ERR(desc)) {
 		dev_err(&pdev->dev, "No platform data (desc) found\n");
 		return -ENODEV;
 	}
@@ -1720,6 +1720,11 @@ static int charger_manager_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	if (!desc->psy_fuel_gauge) {
+		dev_err(&pdev->dev, "No fuel gauge power supply defined\n");
+		return -EINVAL;
+	}
+
 	/* Counting index only */
 	while (desc->psy_charger_stat[i])
 		i++;
@@ -1839,6 +1844,13 @@ static int charger_manager_probe(struct platform_device *pdev)
 	device_init_wakeup(&pdev->dev, true);
 	device_set_wakeup_capable(&pdev->dev, false);
 
+	/*
+	 * Charger-manager have to check the charging state right after
+	 * tialization of charger-manager and then update current charging
+	 * state.
+	 */
+	cm_monitor();
+
 	schedule_work(&setup_polling);
 
 	return 0;
diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c
index a0024b25219..7536933d0ab 100644
--- a/drivers/power/gpio-charger.c
+++ b/drivers/power/gpio-charger.c
@@ -55,7 +55,7 @@ static int gpio_charger_get_property(struct power_supply *psy,
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_ONLINE:
-		val->intval = gpio_get_value_cansleep(pdata->gpio);
+		val->intval = !!gpio_get_value_cansleep(pdata->gpio);
 		val->intval ^= pdata->gpio_active_low;
 		break;
 	default:
diff --git a/drivers/power/max14577_charger.c b/drivers/power/max14577_charger.c
index fad2a75b360..0a2bc727702 100644
--- a/drivers/power/max14577_charger.c
+++ b/drivers/power/max14577_charger.c
@@ -1,7 +1,7 @@
 /*
- * Battery charger driver for the Maxim 14577
+ * max14577_charger.c - Battery charger driver for the Maxim 14577/77836
  *
- * Copyright (C) 2013 Samsung Electronics
+ * Copyright (C) 2013,2014 Samsung Electronics
  * Krzysztof Kozlowski <k.kozlowski@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,16 +19,44 @@
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/mfd/max14577-private.h>
+#include <linux/mfd/max14577.h>
 
 struct max14577_charger {
 	struct device *dev;
 	struct max14577	*max14577;
 	struct power_supply	charger;
 
-	unsigned int	charging_state;
-	unsigned int	battery_state;
+	unsigned int		charging_state;
+	unsigned int		battery_state;
+
+	struct max14577_charger_platform_data	*pdata;
 };
 
+/*
+ * Helper function for mapping values of STATUS2/CHGTYP register on max14577
+ * and max77836 chipsets to enum maxim_muic_charger_type.
+ */
+static enum max14577_muic_charger_type maxim_get_charger_type(
+		enum maxim_device_type dev_type, u8 val) {
+	switch (val) {
+	case MAX14577_CHARGER_TYPE_NONE:
+	case MAX14577_CHARGER_TYPE_USB:
+	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
+	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
+	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
+	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
+		return val;
+	case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
+	case MAX14577_CHARGER_TYPE_RESERVED:
+		if (dev_type == MAXIM_DEVICE_TYPE_MAX77836)
+			val |= 0x8;
+		return val;
+	default:
+		WARN_ONCE(1, "max14577: Unsupported chgtyp register value 0x%02x", val);
+		return val;
+	}
+}
+
 static int max14577_get_charger_state(struct max14577_charger *chg)
 {
 	struct regmap *rmap = chg->max14577->regmap;
@@ -89,19 +117,23 @@ static int max14577_get_online(struct max14577_charger *chg)
 {
 	struct regmap *rmap = chg->max14577->regmap;
 	u8 reg_data;
+	enum max14577_muic_charger_type chg_type;
 
 	max14577_read_reg(rmap, MAX14577_MUIC_REG_STATUS2, &reg_data);
 	reg_data = ((reg_data & STATUS2_CHGTYP_MASK) >> STATUS2_CHGTYP_SHIFT);
-	switch (reg_data) {
+	chg_type = maxim_get_charger_type(chg->max14577->dev_type, reg_data);
+	switch (chg_type) {
 	case MAX14577_CHARGER_TYPE_USB:
 	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
 	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
 	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
 	case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
+	case MAX77836_CHARGER_TYPE_SPECIAL_BIAS:
 		return 1;
 	case MAX14577_CHARGER_TYPE_NONE:
 	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
 	case MAX14577_CHARGER_TYPE_RESERVED:
+	case MAX77836_CHARGER_TYPE_RESERVED:
 	default:
 		return 0;
 	}
@@ -118,10 +150,12 @@ static int max14577_get_battery_health(struct max14577_charger *chg)
 	struct regmap *rmap = chg->max14577->regmap;
 	int state = POWER_SUPPLY_HEALTH_GOOD;
 	u8 reg_data;
+	enum max14577_muic_charger_type chg_type;
 
 	max14577_read_reg(rmap, MAX14577_MUIC_REG_STATUS2, &reg_data);
 	reg_data = ((reg_data & STATUS2_CHGTYP_MASK) >> STATUS2_CHGTYP_SHIFT);
-	if (reg_data == MAX14577_CHARGER_TYPE_DEAD_BATTERY) {
+	chg_type = maxim_get_charger_type(chg->max14577->dev_type, reg_data);
+	if (chg_type == MAX14577_CHARGER_TYPE_DEAD_BATTERY) {
 		state = POWER_SUPPLY_HEALTH_DEAD;
 		goto state_set;
 	}
@@ -147,15 +181,131 @@ static int max14577_get_present(struct max14577_charger *chg)
 	return 1;
 }
 
+static int max14577_set_fast_charge_timer(struct max14577_charger *chg,
+		unsigned long hours)
+{
+	u8 reg_data;
+
+	switch (hours) {
+	case 5 ... 7:
+		reg_data = hours - 3;
+		break;
+	case 0:
+		/* Disable */
+		reg_data = 0x7;
+		break;
+	default:
+		dev_err(chg->dev, "Wrong value for Fast-Charge Timer: %lu\n",
+				hours);
+		return -EINVAL;
+	}
+	reg_data <<= CHGCTRL1_TCHW_SHIFT;
+
+	return max14577_update_reg(chg->max14577->regmap,
+			MAX14577_REG_CHGCTRL1, CHGCTRL1_TCHW_MASK, reg_data);
+}
+
+static int max14577_init_constant_voltage(struct max14577_charger *chg,
+		unsigned int uvolt)
+{
+	u8 reg_data;
+
+	if (uvolt < MAXIM_CHARGER_CONSTANT_VOLTAGE_MIN ||
+			uvolt > MAXIM_CHARGER_CONSTANT_VOLTAGE_MAX)
+		return -EINVAL;
+
+	if (uvolt == 4200000)
+		reg_data = 0x0;
+	else if (uvolt == MAXIM_CHARGER_CONSTANT_VOLTAGE_MAX)
+		reg_data = 0x1f;
+	else if (uvolt <= 4280000) {
+		unsigned int val = uvolt;
+
+		val -= MAXIM_CHARGER_CONSTANT_VOLTAGE_MIN;
+		val /= MAXIM_CHARGER_CONSTANT_VOLTAGE_STEP;
+		if (uvolt <= 4180000)
+			reg_data = 0x1 + val;
+		else
+			reg_data = val; /* Fix for gap between 4.18V and 4.22V */
+	} else
+		return -EINVAL;
+
+	reg_data <<= CHGCTRL3_MBCCVWRC_SHIFT;
+
+	return max14577_write_reg(chg->max14577->regmap,
+			MAX14577_CHG_REG_CHG_CTRL3, reg_data);
+}
+
+static int max14577_init_eoc(struct max14577_charger *chg,
+		unsigned int uamp)
+{
+	unsigned int current_bits = 0xf;
+	u8 reg_data;
+
+	switch (chg->max14577->dev_type) {
+	case MAXIM_DEVICE_TYPE_MAX77836:
+		if (uamp < 5000)
+			return -EINVAL; /* Requested current is too low */
+
+		if (uamp >= 7500 && uamp < 10000)
+			current_bits = 0x0;
+		else if (uamp <= 50000) {
+			/* <5000, 7499> and <10000, 50000> */
+			current_bits = uamp / 5000;
+		} else {
+			uamp = min(uamp, 100000U) - 50000U;
+			current_bits = 0xa + uamp / 10000;
+		}
+		break;
+
+	case MAXIM_DEVICE_TYPE_MAX14577:
+	default:
+		if (uamp < MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN)
+			return -EINVAL; /* Requested current is too low */
+
+		uamp = min(uamp, MAX14577_CHARGER_EOC_CURRENT_LIMIT_MAX);
+		uamp -= MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN;
+		current_bits = uamp / MAX14577_CHARGER_EOC_CURRENT_LIMIT_STEP;
+		break;
+	}
+
+	reg_data = current_bits << CHGCTRL5_EOCS_SHIFT;
+
+	return max14577_update_reg(chg->max14577->regmap,
+			MAX14577_CHG_REG_CHG_CTRL5, CHGCTRL5_EOCS_MASK,
+			reg_data);
+}
+
+static int max14577_init_fast_charge(struct max14577_charger *chg,
+		unsigned int uamp)
+{
+	u8 reg_data;
+	int ret;
+	const struct maxim_charger_current *limits =
+		&maxim_charger_currents[chg->max14577->dev_type];
+
+	ret = maxim_charger_calc_reg_current(limits, uamp, uamp, &reg_data);
+	if (ret) {
+		dev_err(chg->dev, "Wrong value for fast charge: %u\n", uamp);
+		return ret;
+	}
+
+	return max14577_update_reg(chg->max14577->regmap,
+			MAX14577_CHG_REG_CHG_CTRL4,
+			CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
+			reg_data);
+}
+
 /*
  * Sets charger registers to proper and safe default values.
  * Some of these values are equal to defaults in MAX14577E
  * data sheet but there are minor differences.
  */
-static void max14577_charger_reg_init(struct max14577_charger *chg)
+static int max14577_charger_reg_init(struct max14577_charger *chg)
 {
 	struct regmap *rmap = chg->max14577->regmap;
 	u8 reg_data;
+	int ret;
 
 	/*
 	 * Charger-Type Manual Detection, default off (set CHGTYPMAN to 0)
@@ -167,10 +317,6 @@ static void max14577_charger_reg_init(struct max14577_charger *chg)
 			CDETCTRL1_CHGDETEN_MASK | CDETCTRL1_CHGTYPMAN_MASK,
 			reg_data);
 
-	/* Battery Fast-Charge Timer, from SM-V700: 6hrs */
-	reg_data = 0x3 << CHGCTRL1_TCHW_SHIFT;
-	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL1, reg_data);
-
 	/*
 	 * Wall-Adapter Rapid Charge, default on
 	 * Battery-Charger, default on
@@ -179,29 +325,46 @@ static void max14577_charger_reg_init(struct max14577_charger *chg)
 	reg_data |= 0x1 << CHGCTRL2_MBCHOSTEN_SHIFT;
 	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL2, reg_data);
 
-	/* Battery-Charger Constant Voltage (CV) Mode, from SM-V700: 4.35V */
-	reg_data = 0xf << CHGCTRL3_MBCCVWRC_SHIFT;
-	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL3, reg_data);
-
-	/*
-	 * Fast Battery-Charge Current Low, default 200-950mA
-	 * Fast Battery-Charge Current High, from SM-V700: 450mA
-	 */
-	reg_data = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
-	reg_data |= 0x5 << CHGCTRL4_MBCICHWRCH_SHIFT;
-	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL4, reg_data);
-
-	/* End-of-Charge Current, from SM-V700: 50mA */
-	reg_data = 0x0 << CHGCTRL5_EOCS_SHIFT;
-	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL5, reg_data);
-
 	/* Auto Charging Stop, default off */
 	reg_data = 0x0 << CHGCTRL6_AUTOSTOP_SHIFT;
 	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL6, reg_data);
 
-	/* Overvoltage-Protection Threshold, from SM-V700: 6.5V */
-	reg_data = 0x2 << CHGCTRL7_OTPCGHCVS_SHIFT;
+	ret = max14577_init_constant_voltage(chg, chg->pdata->constant_uvolt);
+	if (ret)
+		return ret;
+
+	ret = max14577_init_eoc(chg, chg->pdata->eoc_uamp);
+	if (ret)
+		return ret;
+
+	ret = max14577_init_fast_charge(chg, chg->pdata->fast_charge_uamp);
+	if (ret)
+		return ret;
+
+	ret = max14577_set_fast_charge_timer(chg,
+			MAXIM_CHARGER_FAST_CHARGE_TIMER_DEFAULT);
+	if (ret)
+		return ret;
+
+	/* Initialize Overvoltage-Protection Threshold */
+	switch (chg->pdata->ovp_uvolt) {
+	case 7500000:
+		reg_data = 0x0;
+		break;
+	case 6000000:
+	case 6500000:
+	case 7000000:
+		reg_data = 0x1 + (chg->pdata->ovp_uvolt - 6000000) / 500000;
+		break;
+	default:
+		dev_err(chg->dev, "Wrong value for OVP: %u\n",
+				chg->pdata->ovp_uvolt);
+		return -EINVAL;
+	}
+	reg_data <<= CHGCTRL7_OTPCGHCVS_SHIFT;
 	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL7, reg_data);
+
+	return 0;
 }
 
 /* Support property from charger */
@@ -215,7 +378,11 @@ static enum power_supply_property max14577_charger_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
-static const char *model_name = "MAX14577";
+static const char * const model_names[] = {
+	[MAXIM_DEVICE_TYPE_UNKNOWN]	= "MAX14577-like",
+	[MAXIM_DEVICE_TYPE_MAX14577]	= "MAX14577",
+	[MAXIM_DEVICE_TYPE_MAX77836]	= "MAX77836",
+};
 static const char *manufacturer = "Maxim Integrated";
 
 static int max14577_charger_get_property(struct power_supply *psy,
@@ -244,7 +411,8 @@ static int max14577_charger_get_property(struct power_supply *psy,
 		val->intval = max14577_get_online(chg);
 		break;
 	case POWER_SUPPLY_PROP_MODEL_NAME:
-		val->strval = model_name;
+		BUILD_BUG_ON(ARRAY_SIZE(model_names) != MAXIM_DEVICE_TYPE_NUM);
+		val->strval = model_names[chg->max14577->dev_type];
 		break;
 	case POWER_SUPPLY_PROP_MANUFACTURER:
 		val->strval = manufacturer;
@@ -256,6 +424,110 @@ static int max14577_charger_get_property(struct power_supply *psy,
 	return ret;
 }
 
+#ifdef CONFIG_OF
+static struct max14577_charger_platform_data *max14577_charger_dt_init(
+		struct platform_device *pdev)
+{
+	struct max14577_charger_platform_data *pdata;
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "No charger OF node\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	ret = of_property_read_u32(np, "maxim,constant-uvolt",
+			&pdata->constant_uvolt);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,constant-uvolt field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = of_property_read_u32(np, "maxim,fast-charge-uamp",
+			&pdata->fast_charge_uamp);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,fast-charge-uamp field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = of_property_read_u32(np, "maxim,eoc-uamp", &pdata->eoc_uamp);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,eoc-uamp field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = of_property_read_u32(np, "maxim,ovp-uvolt", &pdata->ovp_uvolt);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,ovp-uvolt field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	return pdata;
+}
+#else /* CONFIG_OF */
+static struct max14577_charger_platform_data *max14577_charger_dt_init(
+		struct platform_device *pdev)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF */
+
+static ssize_t show_fast_charge_timer(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct max14577_charger *chg = dev_get_drvdata(dev);
+	u8 reg_data;
+	int ret;
+	unsigned int val;
+
+	ret = max14577_read_reg(chg->max14577->regmap, MAX14577_REG_CHGCTRL1,
+			&reg_data);
+	if (ret)
+		return ret;
+
+	reg_data &= CHGCTRL1_TCHW_MASK;
+	reg_data >>= CHGCTRL1_TCHW_SHIFT;
+	switch (reg_data) {
+	case 0x2 ... 0x4:
+		val = reg_data + 3;
+		break;
+	case 0x7:
+		val = 0;
+		break;
+	default:
+		val = 5;
+		break;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t store_fast_charge_timer(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct max14577_charger *chg = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	ret = max14577_set_fast_charge_timer(chg, val);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(fast_charge_timer, S_IRUGO | S_IWUSR,
+		show_fast_charge_timer, store_fast_charge_timer);
+
 static int max14577_charger_probe(struct platform_device *pdev)
 {
 	struct max14577_charger *chg;
@@ -270,7 +542,13 @@ static int max14577_charger_probe(struct platform_device *pdev)
 	chg->dev = &pdev->dev;
 	chg->max14577 = max14577;
 
-	max14577_charger_reg_init(chg);
+	chg->pdata = max14577_charger_dt_init(pdev);
+	if (IS_ERR_OR_NULL(chg->pdata))
+		return PTR_ERR(chg->pdata);
+
+	ret = max14577_charger_reg_init(chg);
+	if (ret)
+		return ret;
 
 	chg->charger.name = "max14577-charger",
 	chg->charger.type = POWER_SUPPLY_TYPE_BATTERY,
@@ -278,24 +556,47 @@ static int max14577_charger_probe(struct platform_device *pdev)
 	chg->charger.num_properties = ARRAY_SIZE(max14577_charger_props),
 	chg->charger.get_property = max14577_charger_get_property,
 
+	ret = device_create_file(&pdev->dev, &dev_attr_fast_charge_timer);
+	if (ret) {
+		dev_err(&pdev->dev, "failed: create sysfs entry\n");
+		return ret;
+	}
+
 	ret = power_supply_register(&pdev->dev, &chg->charger);
 	if (ret) {
 		dev_err(&pdev->dev, "failed: power supply register\n");
-		return ret;
+		goto err;
 	}
 
+	/* Check for valid values for charger */
+	BUILD_BUG_ON(MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN +
+			MAX14577_CHARGER_EOC_CURRENT_LIMIT_STEP * 0xf !=
+			MAX14577_CHARGER_EOC_CURRENT_LIMIT_MAX);
 	return 0;
+
+err:
+	device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+
+	return ret;
 }
 
 static int max14577_charger_remove(struct platform_device *pdev)
 {
 	struct max14577_charger *chg = platform_get_drvdata(pdev);
 
+	device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
 	power_supply_unregister(&chg->charger);
 
 	return 0;
 }
 
+static const struct platform_device_id max14577_charger_id[] = {
+	{ "max14577-charger", MAXIM_DEVICE_TYPE_MAX14577, },
+	{ "max77836-charger", MAXIM_DEVICE_TYPE_MAX77836, },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, max14577_charger_id);
+
 static struct platform_driver max14577_charger_driver = {
 	.driver = {
 		.owner	= THIS_MODULE,
@@ -303,9 +604,10 @@ static struct platform_driver max14577_charger_driver = {
 	},
 	.probe		= max14577_charger_probe,
 	.remove		= max14577_charger_remove,
+	.id_table	= max14577_charger_id,
 };
 module_platform_driver(max14577_charger_driver);
 
 MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
-MODULE_DESCRIPTION("MAXIM 14577 charger driver");
+MODULE_DESCRIPTION("Maxim 14577/77836 charger driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c
index 0fbac861080..14d44706327 100644
--- a/drivers/power/max17040_battery.c
+++ b/drivers/power/max17040_battery.c
@@ -277,7 +277,8 @@ static SIMPLE_DEV_PM_OPS(max17040_pm_ops, max17040_suspend, max17040_resume);
 #endif /* CONFIG_PM_SLEEP */
 
 static const struct i2c_device_id max17040_id[] = {
-	{ "max17040", 0 },
+	{ "max17040" },
+	{ "max77836-battery" },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, max17040_id);
diff --git a/drivers/power/max8925_power.c b/drivers/power/max8925_power.c
index b4513f284bb..a6d45eef64d 100644
--- a/drivers/power/max8925_power.c
+++ b/drivers/power/max8925_power.c
@@ -443,7 +443,7 @@ max8925_power_dt_init(struct platform_device *pdev)
 	if (!nproot)
 		return pdev->dev.platform_data;
 
-	np = of_find_node_by_name(nproot, "charger");
+	np = of_get_child_by_name(nproot, "charger");
 	if (!np) {
 		dev_err(&pdev->dev, "failed to find charger node\n");
 		return NULL;
@@ -452,13 +452,14 @@ max8925_power_dt_init(struct platform_device *pdev)
 	pdata = devm_kzalloc(&pdev->dev,
 			sizeof(struct max8925_power_pdata),
 			GFP_KERNEL);
+	if (!pdata)
+		goto ret;
 
 	of_property_read_u32(np, "topoff-threshold", &topoff_threshold);
 	of_property_read_u32(np, "batt-detect", &batt_detect);
 	of_property_read_u32(np, "fast-charge", &fast_charge);
 	of_property_read_u32(np, "no-insert-detect", &no_insert_detect);
 	of_property_read_u32(np, "no-temp-support", &no_temp_support);
-	of_node_put(np);
 
 	pdata->batt_detect = batt_detect;
 	pdata->fast_charge = fast_charge;
@@ -466,6 +467,8 @@ max8925_power_dt_init(struct platform_device *pdev)
 	pdata->no_insert_detect = no_insert_detect;
 	pdata->no_temp_support = no_temp_support;
 
+ret:
+	of_node_put(np);
 	return pdata;
 }
 #else
diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c
index 078afd61490..6cb7fe5c022 100644
--- a/drivers/power/power_supply_core.c
+++ b/drivers/power/power_supply_core.c
@@ -58,7 +58,7 @@ static bool __power_supply_is_supplied_by(struct power_supply *supplier,
 
 static int __power_supply_changed_work(struct device *dev, void *data)
 {
-	struct power_supply *psy = (struct power_supply *)data;
+	struct power_supply *psy = data;
 	struct power_supply *pst = dev_get_drvdata(dev);
 
 	if (__power_supply_is_supplied_by(psy, pst)) {
@@ -78,7 +78,14 @@ static void power_supply_changed_work(struct work_struct *work)
 	dev_dbg(psy->dev, "%s\n", __func__);
 
 	spin_lock_irqsave(&psy->changed_lock, flags);
-	if (psy->changed) {
+	/*
+	 * Check 'changed' here to avoid issues due to race between
+	 * power_supply_changed() and this routine. In worst case
+	 * power_supply_changed() can be called again just before we take above
+	 * lock. During the first call of this routine we will mark 'changed' as
+	 * false and it will stay false for the next call as well.
+	 */
+	if (likely(psy->changed)) {
 		psy->changed = false;
 		spin_unlock_irqrestore(&psy->changed_lock, flags);
 		class_for_each_device(power_supply_class, NULL, psy,
@@ -89,12 +96,13 @@ static void power_supply_changed_work(struct work_struct *work)
 		kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE);
 		spin_lock_irqsave(&psy->changed_lock, flags);
 	}
+
 	/*
-	 * Dependent power supplies (e.g. battery) may have changed state
-	 * as a result of this event, so poll again and hold the
-	 * wakeup_source until all events are processed.
+	 * Hold the wakeup_source until all events are processed.
+	 * power_supply_changed() might have called again and have set 'changed'
+	 * to true.
 	 */
-	if (!psy->changed)
+	if (likely(!psy->changed))
 		pm_relax(psy->dev);
 	spin_unlock_irqrestore(&psy->changed_lock, flags);
 }
@@ -119,7 +127,7 @@ EXPORT_SYMBOL_GPL(power_supply_changed);
 static int __power_supply_populate_supplied_from(struct device *dev,
 						 void *data)
 {
-	struct power_supply *psy = (struct power_supply *)data;
+	struct power_supply *psy = data;
 	struct power_supply *epsy = dev_get_drvdata(dev);
 	struct device_node *np;
 	int i = 0;
@@ -127,7 +135,7 @@ static int __power_supply_populate_supplied_from(struct device *dev,
 	do {
 		np = of_parse_phandle(psy->of_node, "power-supplies", i++);
 		if (!np)
-			continue;
+			break;
 
 		if (np == epsy->of_node) {
 			dev_info(psy->dev, "%s: Found supply : %s\n",
@@ -158,12 +166,12 @@ static int power_supply_populate_supplied_from(struct power_supply *psy)
 static int  __power_supply_find_supply_from_node(struct device *dev,
 						 void *data)
 {
-	struct device_node *np = (struct device_node *)data;
+	struct device_node *np = data;
 	struct power_supply *epsy = dev_get_drvdata(dev);
 
-	/* return error breaks out of class_for_each_device loop */
+	/* returning non-zero breaks out of class_for_each_device loop */
 	if (epsy->of_node == np)
-		return -EINVAL;
+		return 1;
 
 	return 0;
 }
@@ -171,30 +179,21 @@ static int  __power_supply_find_supply_from_node(struct device *dev,
 static int power_supply_find_supply_from_node(struct device_node *supply_node)
 {
 	int error;
-	struct device *dev;
-	struct class_dev_iter iter;
 
 	/*
-	 * Use iterator to see if any other device is registered.
-	 * This is required since class_for_each_device returns 0
-	 * if there are no devices registered.
-	 */
-	class_dev_iter_init(&iter, power_supply_class, NULL, NULL);
-	dev = class_dev_iter_next(&iter);
-
-	if (!dev)
-		return -EPROBE_DEFER;
-
-	/*
-	 * We have to treat the return value as inverted, because if
-	 * we return error on not found, then it won't continue looking.
-	 * So we trick it by returning error on success to stop looking
-	 * once the matching device is found.
+	 * class_for_each_device() either returns its own errors or values
+	 * returned by __power_supply_find_supply_from_node().
+	 *
+	 * __power_supply_find_supply_from_node() will return 0 (no match)
+	 * or 1 (match).
+	 *
+	 * We return 0 if class_for_each_device() returned 1, -EPROBE_DEFER if
+	 * it returned 0, or error as returned by it.
 	 */
 	error = class_for_each_device(power_supply_class, NULL, supply_node,
 				       __power_supply_find_supply_from_node);
 
-	return error ? 0 : -EPROBE_DEFER;
+	return error ? (error == 1 ? 0 : error) : -EPROBE_DEFER;
 }
 
 static int power_supply_check_supplies(struct power_supply *psy)
@@ -215,17 +214,21 @@ static int power_supply_check_supplies(struct power_supply *psy)
 
 		np = of_parse_phandle(psy->of_node, "power-supplies", cnt++);
 		if (!np)
-			continue;
+			break;
 
 		ret = power_supply_find_supply_from_node(np);
+		of_node_put(np);
+
 		if (ret) {
-			dev_dbg(psy->dev, "Failed to find supply, defer!\n");
-			of_node_put(np);
-			return -EPROBE_DEFER;
+			dev_dbg(psy->dev, "Failed to find supply!\n");
+			return ret;
 		}
-		of_node_put(np);
 	} while (np);
 
+	/* Missing valid "power-supplies" entries */
+	if (cnt == 1)
+		return 0;
+
 	/* All supplies found, allocate char ** array for filling */
 	psy->supplied_from = devm_kzalloc(psy->dev, sizeof(psy->supplied_from),
 					  GFP_KERNEL);
@@ -234,7 +237,7 @@ static int power_supply_check_supplies(struct power_supply *psy)
 		return -ENOMEM;
 	}
 
-	*psy->supplied_from = devm_kzalloc(psy->dev, sizeof(char *) * cnt,
+	*psy->supplied_from = devm_kzalloc(psy->dev, sizeof(char *) * (cnt - 1),
 					   GFP_KERNEL);
 	if (!*psy->supplied_from) {
 		dev_err(psy->dev, "Couldn't allocate memory for supply list\n");
@@ -253,14 +256,12 @@ static inline int power_supply_check_supplies(struct power_supply *psy)
 static int __power_supply_am_i_supplied(struct device *dev, void *data)
 {
 	union power_supply_propval ret = {0,};
-	struct power_supply *psy = (struct power_supply *)data;
+	struct power_supply *psy = data;
 	struct power_supply *epsy = dev_get_drvdata(dev);
 
 	if (__power_supply_is_supplied_by(epsy, psy))
-		if (!epsy->get_property(epsy, POWER_SUPPLY_PROP_ONLINE, &ret)) {
-			if (ret.intval)
-				return ret.intval;
-		}
+		if (!epsy->get_property(epsy, POWER_SUPPLY_PROP_ONLINE, &ret))
+			return ret.intval;
 
 	return 0;
 }
@@ -285,12 +286,10 @@ static int __power_supply_is_system_supplied(struct device *dev, void *data)
 	unsigned int *count = data;
 
 	(*count)++;
-	if (psy->type != POWER_SUPPLY_TYPE_BATTERY) {
-		if (psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &ret))
-			return 0;
-		if (ret.intval)
+	if (psy->type != POWER_SUPPLY_TYPE_BATTERY)
+		if (!psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &ret))
 			return ret.intval;
-	}
+
 	return 0;
 }
 
@@ -423,9 +422,7 @@ static int psy_register_thermal(struct power_supply *psy)
 		if (psy->properties[i] == POWER_SUPPLY_PROP_TEMP) {
 			psy->tzd = thermal_zone_device_register(psy->name, 0, 0,
 					psy, &psy_tzd_ops, NULL, 0, 0);
-			if (IS_ERR(psy->tzd))
-				return PTR_ERR(psy->tzd);
-			break;
+			return PTR_ERR_OR_ZERO(psy->tzd);
 		}
 	}
 	return 0;
@@ -503,9 +500,7 @@ static int psy_register_cooler(struct power_supply *psy)
 			psy->tcd = thermal_cooling_device_register(
 							(char *)psy->name,
 							psy, &psy_tcd_ops);
-			if (IS_ERR(psy->tcd))
-				return PTR_ERR(psy->tcd);
-			break;
+			return PTR_ERR_OR_ZERO(psy->tcd);
 		}
 	}
 	return 0;
@@ -591,7 +586,7 @@ static int __power_supply_register(struct device *parent,
 
 	power_supply_changed(psy);
 
-	goto success;
+	return 0;
 
 create_triggers_failed:
 	psy_unregister_cooler(psy);
@@ -604,7 +599,6 @@ wakeup_init_failed:
 check_supplies_failed:
 dev_set_name_failed:
 	put_device(dev);
-success:
 	return rc;
 }
 
diff --git a/drivers/power/power_supply_leds.c b/drivers/power/power_supply_leds.c
index 995f966ed5b..effa093c37b 100644
--- a/drivers/power/power_supply_leds.c
+++ b/drivers/power/power_supply_leds.c
@@ -57,8 +57,6 @@ static void power_supply_update_bat_leds(struct power_supply *psy)
 
 static int power_supply_create_bat_triggers(struct power_supply *psy)
 {
-	int rc = 0;
-
 	psy->charging_full_trig_name = kasprintf(GFP_KERNEL,
 					"%s-charging-or-full", psy->name);
 	if (!psy->charging_full_trig_name)
@@ -87,7 +85,7 @@ static int power_supply_create_bat_triggers(struct power_supply *psy)
 	led_trigger_register_simple(psy->charging_blink_full_solid_trig_name,
 				    &psy->charging_blink_full_solid_trig);
 
-	goto success;
+	return 0;
 
 charging_blink_full_solid_failed:
 	kfree(psy->full_trig_name);
@@ -96,9 +94,7 @@ full_failed:
 charging_failed:
 	kfree(psy->charging_full_trig_name);
 charging_full_failed:
-	rc = -ENOMEM;
-success:
-	return rc;
+	return -ENOMEM;
 }
 
 static void power_supply_remove_bat_triggers(struct power_supply *psy)
@@ -132,20 +128,13 @@ static void power_supply_update_gen_leds(struct power_supply *psy)
 
 static int power_supply_create_gen_triggers(struct power_supply *psy)
 {
-	int rc = 0;
-
 	psy->online_trig_name = kasprintf(GFP_KERNEL, "%s-online", psy->name);
 	if (!psy->online_trig_name)
-		goto online_failed;
+		return -ENOMEM;
 
 	led_trigger_register_simple(psy->online_trig_name, &psy->online_trig);
 
-	goto success;
-
-online_failed:
-	rc = -ENOMEM;
-success:
-	return rc;
+	return 0;
 }
 
 static void power_supply_remove_gen_triggers(struct power_supply *psy)
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 750a2027566..62653f50a52 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -73,19 +73,20 @@ static ssize_t power_supply_show_property(struct device *dev,
 	const ptrdiff_t off = attr - power_supply_attrs;
 	union power_supply_propval value;
 
-	if (off == POWER_SUPPLY_PROP_TYPE)
+	if (off == POWER_SUPPLY_PROP_TYPE) {
 		value.intval = psy->type;
-	else
+	} else {
 		ret = psy->get_property(psy, off, &value);
 
-	if (ret < 0) {
-		if (ret == -ENODATA)
-			dev_dbg(dev, "driver has no data for `%s' property\n",
-				attr->attr.name);
-		else if (ret != -ENODEV)
-			dev_err(dev, "driver failed to report `%s' property: %zd\n",
-				attr->attr.name, ret);
-		return ret;
+		if (ret < 0) {
+			if (ret == -ENODATA)
+				dev_dbg(dev, "driver has no data for `%s' property\n",
+					attr->attr.name);
+			else if (ret != -ENODEV)
+				dev_err(dev, "driver failed to report `%s' property: %zd\n",
+					attr->attr.name, ret);
+			return ret;
+		}
 	}
 
 	if (off == POWER_SUPPLY_PROP_STATUS)
@@ -149,9 +150,11 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(voltage_now),
 	POWER_SUPPLY_ATTR(voltage_avg),
 	POWER_SUPPLY_ATTR(voltage_ocv),
+	POWER_SUPPLY_ATTR(voltage_boot),
 	POWER_SUPPLY_ATTR(current_max),
 	POWER_SUPPLY_ATTR(current_now),
 	POWER_SUPPLY_ATTR(current_avg),
+	POWER_SUPPLY_ATTR(current_boot),
 	POWER_SUPPLY_ATTR(power_now),
 	POWER_SUPPLY_ATTR(power_avg),
 	POWER_SUPPLY_ATTR(charge_full_design),
@@ -193,6 +196,7 @@ static struct device_attribute power_supply_attrs[] = {
 	POWER_SUPPLY_ATTR(type),
 	POWER_SUPPLY_ATTR(scope),
 	POWER_SUPPLY_ATTR(charge_term_current),
+	POWER_SUPPLY_ATTR(calibrate),
 	/* Properties of type `const char *' */
 	POWER_SUPPLY_ATTR(model_name),
 	POWER_SUPPLY_ATTR(manufacturer),
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 527a0f47ef4..f65ff49bb27 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -40,7 +40,7 @@ config POWER_RESET_AXXIA
 
 config POWER_RESET_BRCMSTB
 	bool "Broadcom STB reset driver" if COMPILE_TEST
-	depends on POWER_RESET && ARM
+	depends on ARM
 	default ARCH_BRCMSTB
 	help
 	  This driver provides restart support for ARM-based Broadcom STB
@@ -57,9 +57,17 @@ config POWER_RESET_GPIO
 	  If your board needs a GPIO high/low to power down, say Y and
 	  create a binding in your devicetree.
 
+config POWER_RESET_GPIO_RESTART
+	bool "GPIO restart driver"
+	depends on OF_GPIO
+	help
+	  This driver supports restarting your board via a GPIO line.
+	  If your board needs a GPIO high/low to restart, say Y and
+	  create a binding in your devicetree.
+
 config POWER_RESET_HISI
 	bool "Hisilicon power-off driver"
-	depends on POWER_RESET && ARCH_HISI
+	depends on ARCH_HISI
 	help
 	  Reboot support for Hisilicon boards.
 
@@ -69,6 +77,13 @@ config POWER_RESET_MSM
 	help
 	  Power off and restart support for Qualcomm boards.
 
+config POWER_RESET_LTC2952
+	bool "LTC2952 PowerPath power-off driver"
+	depends on OF_GPIO
+	help
+	  This driver supports an external powerdown trigger and board power
+	  down via the LTC2952. Bindings are made in the device tree.
+
 config POWER_RESET_QNAP
 	bool "QNAP power-off driver"
 	depends on OF_GPIO && PLAT_ORION
@@ -92,6 +107,12 @@ config POWER_RESET_SUN6I
 	help
 	  Reboot support for the Allwinner A31 SoCs.
 
+config POWER_RESET_ST
+	bool "ST restart power-off driver"
+	depends on ARCH_STI
+	help
+	  Power off and reset support for STMicroelectronics boards.
+
 config POWER_RESET_VERSATILE
 	bool "ARM Versatile family reboot driver"
 	depends on ARM
@@ -122,4 +143,12 @@ config POWER_RESET_KEYSTONE
 	help
 	  Reboot support for the KEYSTONE SoCs.
 
+config POWER_RESET_SYSCON
+	bool "Generic SYSCON regmap reset driver"
+	depends on OF
+	select MFD_SYSCON
+	help
+	  Reboot support for generic SYSCON mapped register reset.
+
 endif
+
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 73221009f2b..76ce1c59469 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -4,12 +4,16 @@ obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o
 obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
 obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
 obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
+obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
 obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
+obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
 obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
 obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
 obj-$(CONFIG_POWER_RESET_SUN6I) += sun6i-reboot.o
+obj-$(CONFIG_POWER_RESET_ST) += st-poweroff.o
 obj-$(CONFIG_POWER_RESET_VERSATILE) += arm-versatile-reboot.o
 obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
 obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o
 obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o
+obj-$(CONFIG_POWER_RESET_SYSCON) += syscon-reboot.o
diff --git a/drivers/power/reset/gpio-restart.c b/drivers/power/reset/gpio-restart.c
new file mode 100644
index 00000000000..a76829b3f1c
--- /dev/null
+++ b/drivers/power/reset/gpio-restart.c
@@ -0,0 +1,149 @@
+/*
+ * Toggles a GPIO pin to restart a device
+ *
+ * Copyright (C) 2014 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Based on the gpio-poweroff driver.
+ */
+#include <linux/reboot.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/module.h>
+
+struct gpio_restart {
+	struct gpio_desc *reset_gpio;
+	struct notifier_block restart_handler;
+	u32 active_delay_ms;
+	u32 inactive_delay_ms;
+	u32 wait_delay_ms;
+};
+
+static int gpio_restart_notify(struct notifier_block *this,
+				unsigned long mode, void *cmd)
+{
+	struct gpio_restart *gpio_restart =
+		container_of(this, struct gpio_restart, restart_handler);
+
+	/* drive it active, also inactive->active edge */
+	gpiod_direction_output(gpio_restart->reset_gpio, 1);
+	mdelay(gpio_restart->active_delay_ms);
+
+	/* drive inactive, also active->inactive edge */
+	gpiod_set_value(gpio_restart->reset_gpio, 0);
+	mdelay(gpio_restart->inactive_delay_ms);
+
+	/* drive it active, also inactive->active edge */
+	gpiod_set_value(gpio_restart->reset_gpio, 1);
+
+	/* give it some time */
+	mdelay(gpio_restart->wait_delay_ms);
+
+	WARN_ON(1);
+
+	return NOTIFY_DONE;
+}
+
+static int gpio_restart_probe(struct platform_device *pdev)
+{
+	struct gpio_restart *gpio_restart;
+	bool open_source = false;
+	u32 property;
+	int ret;
+
+	gpio_restart = devm_kzalloc(&pdev->dev, sizeof(*gpio_restart),
+			GFP_KERNEL);
+	if (!gpio_restart)
+		return -ENOMEM;
+
+	open_source = of_property_read_bool(pdev->dev.of_node, "open-source");
+
+	gpio_restart->reset_gpio = devm_gpiod_get(&pdev->dev, NULL,
+			open_source ? GPIOD_IN : GPIOD_OUT_LOW);
+	if (IS_ERR(gpio_restart->reset_gpio)) {
+		dev_err(&pdev->dev, "Could net get reset GPIO\n");
+		return PTR_ERR(gpio_restart->reset_gpio);
+	}
+
+	gpio_restart->restart_handler.notifier_call = gpio_restart_notify;
+	gpio_restart->restart_handler.priority = 128;
+	gpio_restart->active_delay_ms = 100;
+	gpio_restart->inactive_delay_ms = 100;
+	gpio_restart->wait_delay_ms = 3000;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "priority", &property);
+	if (!ret) {
+		if (property > 255)
+			dev_err(&pdev->dev, "Invalid priority property: %u\n",
+					property);
+		else
+			gpio_restart->restart_handler.priority = property;
+	}
+
+	of_property_read_u32(pdev->dev.of_node, "active-delay",
+			&gpio_restart->active_delay_ms);
+	of_property_read_u32(pdev->dev.of_node, "inactive-delay",
+			&gpio_restart->inactive_delay_ms);
+	of_property_read_u32(pdev->dev.of_node, "wait-delay",
+			&gpio_restart->wait_delay_ms);
+
+	platform_set_drvdata(pdev, gpio_restart);
+
+	ret = register_restart_handler(&gpio_restart->restart_handler);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: cannot register restart handler, %d\n",
+				__func__, ret);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int gpio_restart_remove(struct platform_device *pdev)
+{
+	struct gpio_restart *gpio_restart = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = unregister_restart_handler(&gpio_restart->restart_handler);
+	if (ret) {
+		dev_err(&pdev->dev,
+				"%s: cannot unregister restart handler, %d\n",
+				__func__, ret);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id of_gpio_restart_match[] = {
+	{ .compatible = "gpio-restart", },
+	{},
+};
+
+static struct platform_driver gpio_restart_driver = {
+	.probe = gpio_restart_probe,
+	.remove = gpio_restart_remove,
+	.driver = {
+		.name = "restart-gpio",
+		.owner = THIS_MODULE,
+		.of_match_table = of_gpio_restart_match,
+	},
+};
+
+module_platform_driver(gpio_restart_driver);
+
+MODULE_AUTHOR("David Riley <davidriley@chromium.org>");
+MODULE_DESCRIPTION("GPIO restart driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/reset/ltc2952-poweroff.c b/drivers/power/reset/ltc2952-poweroff.c
new file mode 100644
index 00000000000..116a1cef8f7
--- /dev/null
+++ b/drivers/power/reset/ltc2952-poweroff.c
@@ -0,0 +1,386 @@
+/*
+ * LTC2952 (PowerPath) driver
+ *
+ * Copyright (C) 2014, Xsens Technologies BV <info@xsens.com>
+ * Maintainer: René Moll <linux@r-moll.nl>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * ----------------------------------------
+ * - Description
+ * ----------------------------------------
+ *
+ * This driver is to be used with an external PowerPath Controller (LTC2952).
+ * Its function is to determine when a external shut down is triggered
+ * and react by properly shutting down the system.
+ *
+ * This driver expects a device tree with a ltc2952 entry for pin mapping.
+ *
+ * ----------------------------------------
+ * - GPIO
+ * ----------------------------------------
+ *
+ * The following GPIOs are used:
+ * - trigger (input)
+ *     A level change indicates the shut-down trigger. If it's state reverts
+ *     within the time-out defined by trigger_delay, the shut down is not
+ *     executed.
+ *
+ * - watchdog (output)
+ *     Once a shut down is triggered, the driver will toggle this signal,
+ *     with an internal (wde_interval) to stall the hardware shut down.
+ *
+ * - kill (output)
+ *     The last action during shut down is triggering this signalling, such
+ *     that the PowerPath Control will power down the hardware.
+ *
+ * ----------------------------------------
+ * - Interrupts
+ * ----------------------------------------
+ *
+ * The driver requires a non-shared, edge-triggered interrupt on the trigger
+ * GPIO.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/ktime.h>
+#include <linux/slab.h>
+#include <linux/kmod.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/reboot.h>
+
+struct ltc2952_poweroff_data {
+	struct hrtimer timer_trigger;
+	struct hrtimer timer_wde;
+
+	ktime_t trigger_delay;
+	ktime_t wde_interval;
+
+	struct device *dev;
+
+	unsigned int virq;
+
+	/**
+	 * 0: trigger
+	 * 1: watchdog
+	 * 2: kill
+	 */
+	struct gpio_desc *gpio[3];
+};
+
+static int ltc2952_poweroff_panic;
+static struct ltc2952_poweroff_data *ltc2952_data;
+
+#define POWERPATH_IO_TRIGGER	0
+#define POWERPATH_IO_WATCHDOG	1
+#define POWERPATH_IO_KILL	2
+
+/**
+ * ltc2952_poweroff_timer_wde - Timer callback
+ * Toggles the watchdog reset signal each wde_interval
+ *
+ * @timer: corresponding timer
+ *
+ * Returns HRTIMER_RESTART for an infinite loop which will only stop when the
+ * machine actually shuts down
+ */
+static enum hrtimer_restart ltc2952_poweroff_timer_wde(struct hrtimer *timer)
+{
+	ktime_t now;
+	int state;
+	unsigned long overruns;
+
+	if (ltc2952_poweroff_panic)
+		return HRTIMER_NORESTART;
+
+	state = gpiod_get_value(ltc2952_data->gpio[POWERPATH_IO_WATCHDOG]);
+	gpiod_set_value(ltc2952_data->gpio[POWERPATH_IO_WATCHDOG], !state);
+
+	now = hrtimer_cb_get_time(timer);
+	overruns = hrtimer_forward(timer, now, ltc2952_data->wde_interval);
+
+	return HRTIMER_RESTART;
+}
+
+static enum hrtimer_restart ltc2952_poweroff_timer_trigger(
+	struct hrtimer *timer)
+{
+	int ret;
+
+	ret = hrtimer_start(&ltc2952_data->timer_wde,
+		ltc2952_data->wde_interval, HRTIMER_MODE_REL);
+
+	if (ret) {
+		dev_err(ltc2952_data->dev, "unable to start the timer\n");
+		/*
+		 * The device will not toggle the watchdog reset,
+		 * thus shut down is only safe if the PowerPath controller
+		 * has a long enough time-off before triggering a hardware
+		 * power-off.
+		 *
+		 * Only sending a warning as the system will power-off anyway
+		 */
+	}
+
+	dev_info(ltc2952_data->dev, "executing shutdown\n");
+
+	orderly_poweroff(true);
+
+	return HRTIMER_NORESTART;
+}
+
+/**
+ * ltc2952_poweroff_handler - Interrupt handler
+ * Triggered each time the trigger signal changes state and (de)activates a
+ * time-out (timer_trigger). Once the time-out is actually reached the shut
+ * down is executed.
+ *
+ * @irq: IRQ number
+ * @dev_id: pointer to the main data structure
+ */
+static irqreturn_t ltc2952_poweroff_handler(int irq, void *dev_id)
+{
+	int ret;
+	struct ltc2952_poweroff_data *data = dev_id;
+
+	if (ltc2952_poweroff_panic)
+		goto irq_ok;
+
+	if (hrtimer_active(&data->timer_wde)) {
+		/* shutdown is already triggered, nothing to do any more */
+		goto irq_ok;
+	}
+
+	if (!hrtimer_active(&data->timer_trigger)) {
+		ret = hrtimer_start(&data->timer_trigger, data->trigger_delay,
+			HRTIMER_MODE_REL);
+
+		if (ret)
+			dev_err(data->dev, "unable to start the wait timer\n");
+	} else {
+		ret = hrtimer_cancel(&data->timer_trigger);
+		/* omitting return value check, timer should have been valid */
+	}
+
+irq_ok:
+	return IRQ_HANDLED;
+}
+
+static void ltc2952_poweroff_kill(void)
+{
+	gpiod_set_value(ltc2952_data->gpio[POWERPATH_IO_KILL], 1);
+}
+
+static int ltc2952_poweroff_suspend(struct platform_device *pdev,
+	pm_message_t state)
+{
+	return -ENOSYS;
+}
+
+static int ltc2952_poweroff_resume(struct platform_device *pdev)
+{
+	return -ENOSYS;
+}
+
+static void ltc2952_poweroff_default(struct ltc2952_poweroff_data *data)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(data->gpio); i++)
+		data->gpio[i] = NULL;
+
+	data->wde_interval = ktime_set(0, 300L*1E6L);
+	data->trigger_delay = ktime_set(2, 500L*1E6L);
+
+	hrtimer_init(&data->timer_trigger, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	data->timer_trigger.function = &ltc2952_poweroff_timer_trigger;
+
+	hrtimer_init(&data->timer_wde, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	data->timer_wde.function = &ltc2952_poweroff_timer_wde;
+}
+
+static int ltc2952_poweroff_init(struct platform_device *pdev)
+{
+	int ret, virq;
+	unsigned int i;
+	struct ltc2952_poweroff_data *data;
+
+	static char *name[] = {
+		"trigger",
+		"watchdog",
+		"kill",
+		NULL
+	};
+
+	data = ltc2952_data;
+	ltc2952_poweroff_default(ltc2952_data);
+
+	for (i = 0; i < ARRAY_SIZE(ltc2952_data->gpio); i++) {
+		ltc2952_data->gpio[i] = gpiod_get(&pdev->dev, name[i]);
+
+		if (IS_ERR(ltc2952_data->gpio[i])) {
+			ret = PTR_ERR(ltc2952_data->gpio[i]);
+			dev_err(&pdev->dev,
+				"unable to claim the following gpio: %s\n",
+				name[i]);
+			goto err_io;
+		}
+	}
+
+	ret = gpiod_direction_output(
+		ltc2952_data->gpio[POWERPATH_IO_WATCHDOG], 0);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to use watchdog-gpio as output\n");
+		goto err_io;
+	}
+
+	ret = gpiod_direction_output(ltc2952_data->gpio[POWERPATH_IO_KILL], 0);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to use kill-gpio as output\n");
+		goto err_io;
+	}
+
+	virq = gpiod_to_irq(ltc2952_data->gpio[POWERPATH_IO_TRIGGER]);
+	if (virq < 0) {
+		dev_err(&pdev->dev, "cannot map GPIO as interrupt");
+		goto err_io;
+	}
+
+	ltc2952_data->virq = virq;
+	ret = request_irq(virq,
+		ltc2952_poweroff_handler,
+		(IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING),
+		"ltc2952-poweroff",
+		ltc2952_data
+	);
+
+	if (ret) {
+		dev_err(&pdev->dev, "cannot configure an interrupt handler\n");
+		goto err_io;
+	}
+
+	return 0;
+
+err_io:
+	for (i = 0; i < ARRAY_SIZE(ltc2952_data->gpio); i++)
+		if (ltc2952_data->gpio[i])
+			gpiod_put(ltc2952_data->gpio[i]);
+
+	return ret;
+}
+
+static int ltc2952_poweroff_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	if (pm_power_off) {
+		dev_err(&pdev->dev, "pm_power_off already registered");
+		return -EBUSY;
+	}
+
+	ltc2952_data = kzalloc(sizeof(*ltc2952_data), GFP_KERNEL);
+	if (!ltc2952_data)
+		return -ENOMEM;
+
+	ltc2952_data->dev = &pdev->dev;
+
+	ret = ltc2952_poweroff_init(pdev);
+	if (ret)
+		goto err;
+
+	pm_power_off = &ltc2952_poweroff_kill;
+
+	dev_info(&pdev->dev, "probe successful\n");
+
+	return 0;
+
+err:
+	kfree(ltc2952_data);
+	return ret;
+}
+
+static int ltc2952_poweroff_remove(struct platform_device *pdev)
+{
+	unsigned int i;
+
+	pm_power_off = NULL;
+
+	if (ltc2952_data) {
+		free_irq(ltc2952_data->virq, ltc2952_data);
+
+		for (i = 0; i < ARRAY_SIZE(ltc2952_data->gpio); i++)
+			gpiod_put(ltc2952_data->gpio[i]);
+
+		kfree(ltc2952_data);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id of_ltc2952_poweroff_match[] = {
+	{ .compatible = "lltc,ltc2952"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_ltc2952_poweroff_match);
+
+static struct platform_driver ltc2952_poweroff_driver = {
+	.probe = ltc2952_poweroff_probe,
+	.remove = ltc2952_poweroff_remove,
+	.driver = {
+		.name = "ltc2952-poweroff",
+		.owner = THIS_MODULE,
+		.of_match_table = of_ltc2952_poweroff_match,
+	},
+	.suspend = ltc2952_poweroff_suspend,
+	.resume = ltc2952_poweroff_resume,
+};
+
+static int ltc2952_poweroff_notify_panic(struct notifier_block *nb,
+	unsigned long code, void *unused)
+{
+	ltc2952_poweroff_panic = 1;
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block ltc2952_poweroff_panic_nb = {
+	.notifier_call = ltc2952_poweroff_notify_panic,
+};
+
+static int __init ltc2952_poweroff_platform_init(void)
+{
+	ltc2952_poweroff_panic = 0;
+
+	atomic_notifier_chain_register(&panic_notifier_list,
+		&ltc2952_poweroff_panic_nb);
+
+	return platform_driver_register(&ltc2952_poweroff_driver);
+}
+
+static void __exit ltc2952_poweroff_platform_exit(void)
+{
+	atomic_notifier_chain_unregister(&panic_notifier_list,
+		&ltc2952_poweroff_panic_nb);
+
+	platform_driver_unregister(&ltc2952_poweroff_driver);
+}
+
+module_init(ltc2952_poweroff_platform_init);
+module_exit(ltc2952_poweroff_platform_exit);
+
+MODULE_AUTHOR("René Moll <rene.moll@xsens.com>");
+MODULE_DESCRIPTION("LTC PowerPath power-off driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/msm-poweroff.c b/drivers/power/reset/msm-poweroff.c
index 774f9a3b310..4702efdfe46 100644
--- a/drivers/power/reset/msm-poweroff.c
+++ b/drivers/power/reset/msm-poweroff.c
@@ -20,21 +20,27 @@
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/reboot.h>
-
-#include <asm/system_misc.h>
+#include <linux/pm.h>
 
 static void __iomem *msm_ps_hold;
-
-static void do_msm_restart(enum reboot_mode reboot_mode, const char *cmd)
+static int do_msm_restart(struct notifier_block *nb, unsigned long action,
+			   void *data)
 {
 	writel(0, msm_ps_hold);
 	mdelay(10000);
+
+	return NOTIFY_DONE;
 }
 
+static struct notifier_block restart_nb = {
+	.notifier_call = do_msm_restart,
+	.priority = 128,
+};
+
 static void do_msm_poweroff(void)
 {
 	/* TODO: Add poweroff capability */
-	do_msm_restart(REBOOT_HARD, NULL);
+	do_msm_restart(&restart_nb, 0, NULL);
 }
 
 static int msm_restart_probe(struct platform_device *pdev)
@@ -47,8 +53,10 @@ static int msm_restart_probe(struct platform_device *pdev)
 	if (IS_ERR(msm_ps_hold))
 		return PTR_ERR(msm_ps_hold);
 
+	register_restart_handler(&restart_nb);
+
 	pm_power_off = do_msm_poweroff;
-	arm_pm_restart = do_msm_restart;
+
 	return 0;
 }
 
diff --git a/drivers/power/reset/st-poweroff.c b/drivers/power/reset/st-poweroff.c
new file mode 100644
index 00000000000..a0acf25ee2a
--- /dev/null
+++ b/drivers/power/reset/st-poweroff.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics
+ *
+ * Power off Restart driver, used in STMicroelectronics devices.
+ *
+ * Author: Christophe Kerello <christophe.kerello@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include <asm/system_misc.h>
+
+struct reset_syscfg {
+	struct regmap *regmap;
+	/* syscfg used for reset */
+	unsigned int offset_rst;
+	unsigned int mask_rst;
+	/* syscfg used for unmask the reset */
+	unsigned int offset_rst_msk;
+	unsigned int mask_rst_msk;
+};
+
+/* STiH415 */
+#define STIH415_SYSCFG_11	0x2c
+#define STIH415_SYSCFG_15	0x3c
+
+static struct reset_syscfg stih415_reset = {
+	.offset_rst = STIH415_SYSCFG_11,
+	.mask_rst = BIT(0),
+	.offset_rst_msk = STIH415_SYSCFG_15,
+	.mask_rst_msk = BIT(0)
+};
+
+/* STiH416 */
+#define STIH416_SYSCFG_500	0x7d0
+#define STIH416_SYSCFG_504	0x7e0
+
+static struct reset_syscfg stih416_reset = {
+	.offset_rst = STIH416_SYSCFG_500,
+	.mask_rst = BIT(0),
+	.offset_rst_msk = STIH416_SYSCFG_504,
+	.mask_rst_msk = BIT(0)
+};
+
+/* STiH407 */
+#define STIH407_SYSCFG_4000	0x0
+#define STIH407_SYSCFG_4008	0x20
+
+static struct reset_syscfg stih407_reset = {
+	.offset_rst = STIH407_SYSCFG_4000,
+	.mask_rst = BIT(0),
+	.offset_rst_msk = STIH407_SYSCFG_4008,
+	.mask_rst_msk = BIT(0)
+};
+
+/* STiD127 */
+#define STID127_SYSCFG_700	0x0
+#define STID127_SYSCFG_773	0x124
+
+static struct reset_syscfg stid127_reset = {
+	.offset_rst = STID127_SYSCFG_773,
+	.mask_rst = BIT(0),
+	.offset_rst_msk = STID127_SYSCFG_700,
+	.mask_rst_msk = BIT(8)
+};
+
+static struct reset_syscfg *st_restart_syscfg;
+
+static void st_restart(enum reboot_mode reboot_mode, const char *cmd)
+{
+	/* reset syscfg updated */
+	regmap_update_bits(st_restart_syscfg->regmap,
+			   st_restart_syscfg->offset_rst,
+			   st_restart_syscfg->mask_rst,
+			   0);
+
+	/* unmask the reset */
+	regmap_update_bits(st_restart_syscfg->regmap,
+			   st_restart_syscfg->offset_rst_msk,
+			   st_restart_syscfg->mask_rst_msk,
+			   0);
+}
+
+static struct of_device_id st_reset_of_match[] = {
+	{
+		.compatible = "st,stih415-restart",
+		.data = (void *)&stih415_reset,
+	}, {
+		.compatible = "st,stih416-restart",
+		.data = (void *)&stih416_reset,
+	}, {
+		.compatible = "st,stih407-restart",
+		.data = (void *)&stih407_reset,
+	}, {
+		.compatible = "st,stid127-restart",
+		.data = (void *)&stid127_reset,
+	},
+	{}
+};
+
+static int st_reset_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct device *dev = &pdev->dev;
+
+	match = of_match_device(st_reset_of_match, dev);
+	if (!match)
+		return -ENODEV;
+
+	st_restart_syscfg = (struct reset_syscfg *)match->data;
+
+	st_restart_syscfg->regmap =
+		syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+	if (IS_ERR(st_restart_syscfg->regmap)) {
+		dev_err(dev, "No syscfg phandle specified\n");
+		return PTR_ERR(st_restart_syscfg->regmap);
+	}
+
+	arm_pm_restart = st_restart;
+
+	return 0;
+}
+
+static struct platform_driver st_reset_driver = {
+	.probe = st_reset_probe,
+	.driver = {
+		.name = "st_reset",
+		.of_match_table = st_reset_of_match,
+	},
+};
+
+static int __init st_reset_init(void)
+{
+	return platform_driver_register(&st_reset_driver);
+}
+
+device_initcall(st_reset_init);
+
+MODULE_AUTHOR("Christophe Kerello <christophe.kerello@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics Power off Restart driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/syscon-reboot.c b/drivers/power/reset/syscon-reboot.c
new file mode 100644
index 00000000000..815b901822c
--- /dev/null
+++ b/drivers/power/reset/syscon-reboot.c
@@ -0,0 +1,91 @@
+/*
+ * Generic Syscon Reboot Driver
+ *
+ * Copyright (c) 2013, Applied Micro Circuits Corporation
+ * Author: Feng Kan <fkan@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+struct syscon_reboot_context {
+	struct regmap *map;
+	u32 offset;
+	u32 mask;
+	struct notifier_block restart_handler;
+};
+
+static int syscon_restart_handle(struct notifier_block *this,
+					unsigned long mode, void *cmd)
+{
+	struct syscon_reboot_context *ctx =
+			container_of(this, struct syscon_reboot_context,
+					restart_handler);
+
+	/* Issue the reboot */
+	regmap_write(ctx->map, ctx->offset, ctx->mask);
+
+	mdelay(1000);
+
+	pr_emerg("Unable to restart system\n");
+	return NOTIFY_DONE;
+}
+
+static int syscon_reboot_probe(struct platform_device *pdev)
+{
+	struct syscon_reboot_context *ctx;
+	struct device *dev = &pdev->dev;
+	int err;
+
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->map = syscon_regmap_lookup_by_phandle(dev->of_node, "regmap");
+	if (IS_ERR(ctx->map))
+		return PTR_ERR(ctx->map);
+
+	if (of_property_read_u32(pdev->dev.of_node, "offset", &ctx->offset))
+		return -EINVAL;
+
+	if (of_property_read_u32(pdev->dev.of_node, "mask", &ctx->mask))
+		return -EINVAL;
+
+	ctx->restart_handler.notifier_call = syscon_restart_handle;
+	ctx->restart_handler.priority = 128;
+	err = register_restart_handler(&ctx->restart_handler);
+	if (err)
+		dev_err(dev, "can't register restart notifier (err=%d)\n", err);
+
+	return err;
+}
+
+static struct of_device_id syscon_reboot_of_match[] = {
+	{ .compatible = "syscon-reboot" },
+	{}
+};
+
+static struct platform_driver syscon_reboot_driver = {
+	.probe = syscon_reboot_probe,
+	.driver = {
+		.name = "syscon-reboot",
+		.of_match_table = syscon_reboot_of_match,
+	},
+};
+module_platform_driver(syscon_reboot_driver);
diff --git a/drivers/power/reset/xgene-reboot.c b/drivers/power/reset/xgene-reboot.c
index ecd55f81b9d..6b49be6867a 100644
--- a/drivers/power/reset/xgene-reboot.c
+++ b/drivers/power/reset/xgene-reboot.c
@@ -40,7 +40,7 @@ struct xgene_reboot_context {
 
 static struct xgene_reboot_context *xgene_restart_ctx;
 
-static void xgene_restart(char str, const char *cmd)
+static void xgene_restart(enum reboot_mode mode, const char *cmd)
 {
 	struct xgene_reboot_context *ctx = xgene_restart_ctx;
 	unsigned long timeout;
diff --git a/drivers/power/sbs-battery.c b/drivers/power/sbs-battery.c
index b5f2a76b6cd..c7b7b4018df 100644
--- a/drivers/power/sbs-battery.c
+++ b/drivers/power/sbs-battery.c
@@ -48,7 +48,10 @@ enum {
 	REG_FULL_CHARGE_CAPACITY_CHARGE,
 	REG_DESIGN_CAPACITY,
 	REG_DESIGN_CAPACITY_CHARGE,
-	REG_DESIGN_VOLTAGE,
+	REG_DESIGN_VOLTAGE_MIN,
+	REG_DESIGN_VOLTAGE_MAX,
+	REG_MANUFACTURER,
+	REG_MODEL_NAME,
 };
 
 /* Battery Mode defines */
@@ -68,6 +71,7 @@ enum sbs_battery_mode {
 #define BATTERY_FULL_CHARGED		0x20
 #define BATTERY_FULL_DISCHARGED		0x10
 
+/* min_value and max_value are only valid for numerical data */
 #define SBS_DATA(_psp, _addr, _min_value, _max_value) { \
 	.psp = _psp, \
 	.addr = _addr, \
@@ -111,10 +115,17 @@ static const struct chip_data {
 		SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0, 65535),
 	[REG_DESIGN_CAPACITY_CHARGE] =
 		SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, 0x18, 0, 65535),
-	[REG_DESIGN_VOLTAGE] =
+	[REG_DESIGN_VOLTAGE_MIN] =
+		SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, 0x19, 0, 65535),
+	[REG_DESIGN_VOLTAGE_MAX] =
 		SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0, 65535),
 	[REG_SERIAL_NUMBER] =
 		SBS_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535),
+	/* Properties of type `const char *' */
+	[REG_MANUFACTURER] =
+		SBS_DATA(POWER_SUPPLY_PROP_MANUFACTURER, 0x20, 0, 65535),
+	[REG_MODEL_NAME] =
+		SBS_DATA(POWER_SUPPLY_PROP_MODEL_NAME, 0x21, 0, 65535)
 };
 
 static enum power_supply_property sbs_properties[] = {
@@ -130,6 +141,7 @@ static enum power_supply_property sbs_properties[] = {
 	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
 	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
 	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_NOW,
 	POWER_SUPPLY_PROP_ENERGY_FULL,
@@ -137,6 +149,9 @@ static enum power_supply_property sbs_properties[] = {
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_CHARGE_FULL,
 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	/* Properties of type `const char *' */
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_MODEL_NAME
 };
 
 struct sbs_info {
@@ -153,6 +168,9 @@ struct sbs_info {
 	int				ignore_changes;
 };
 
+static char model_name[I2C_SMBUS_BLOCK_MAX + 1];
+static char manufacturer[I2C_SMBUS_BLOCK_MAX + 1];
+
 static int sbs_read_word_data(struct i2c_client *client, u8 address)
 {
 	struct sbs_info *chip = i2c_get_clientdata(client);
@@ -179,6 +197,74 @@ static int sbs_read_word_data(struct i2c_client *client, u8 address)
 	return le16_to_cpu(ret);
 }
 
+static int sbs_read_string_data(struct i2c_client *client, u8 address,
+				char *values)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	s32 ret = 0, block_length = 0;
+	int retries_length = 1, retries_block = 1;
+	u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+
+	if (chip->pdata) {
+		retries_length = max(chip->pdata->i2c_retry_count + 1, 1);
+		retries_block = max(chip->pdata->i2c_retry_count + 1, 1);
+	}
+
+	/* Adapter needs to support these two functions */
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_I2C_BLOCK)){
+		return -ENODEV;
+	}
+
+	/* Get the length of block data */
+	while (retries_length > 0) {
+		ret = i2c_smbus_read_byte_data(client, address);
+		if (ret >= 0)
+			break;
+		retries_length--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev,
+			"%s: i2c read at address 0x%x failed\n",
+			__func__, address);
+		return ret;
+	}
+
+	/* block_length does not include NULL terminator */
+	block_length = ret;
+	if (block_length > I2C_SMBUS_BLOCK_MAX) {
+		dev_err(&client->dev,
+			"%s: Returned block_length is longer than 0x%x\n",
+			__func__, I2C_SMBUS_BLOCK_MAX);
+		return -EINVAL;
+	}
+
+	/* Get the block data */
+	while (retries_block > 0) {
+		ret = i2c_smbus_read_i2c_block_data(
+				client, address,
+				block_length + 1, block_buffer);
+		if (ret >= 0)
+			break;
+		retries_block--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev,
+			"%s: i2c read at address 0x%x failed\n",
+			__func__, address);
+		return ret;
+	}
+
+	/* block_buffer[0] == block_length */
+	memcpy(values, block_buffer + 1, block_length);
+	values[block_length] = '\0';
+
+	return le16_to_cpu(ret);
+}
+
 static int sbs_write_word_data(struct i2c_client *client, u8 address,
 	u16 value)
 {
@@ -318,6 +404,19 @@ static int sbs_get_battery_property(struct i2c_client *client,
 	return 0;
 }
 
+static int sbs_get_battery_string_property(struct i2c_client *client,
+	int reg_offset, enum power_supply_property psp, char *val)
+{
+	s32 ret;
+
+	ret = sbs_read_string_data(client, sbs_data[reg_offset].addr, val);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 static void  sbs_unit_adjustment(struct i2c_client *client,
 	enum power_supply_property psp, union power_supply_propval *val)
 {
@@ -336,6 +435,7 @@ static void  sbs_unit_adjustment(struct i2c_client *client,
 		break;
 
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
 	case POWER_SUPPLY_PROP_CHARGE_NOW:
@@ -497,6 +597,7 @@ static int sbs_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_TEMP:
 	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
 	case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
 	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
 		ret = sbs_get_property_index(client, psp);
 		if (ret < 0)
@@ -505,6 +606,26 @@ static int sbs_get_property(struct power_supply *psy,
 		ret = sbs_get_battery_property(client, ret, psp, val);
 		break;
 
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		ret = sbs_get_property_index(client, psp);
+		if (ret < 0)
+			break;
+
+		ret = sbs_get_battery_string_property(client, ret, psp,
+						      model_name);
+		val->strval = model_name;
+		break;
+
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		ret = sbs_get_property_index(client, psp);
+		if (ret < 0)
+			break;
+
+		ret = sbs_get_battery_string_property(client, ret, psp,
+						      manufacturer);
+		val->strval = manufacturer;
+		break;
+
 	default:
 		dev_err(&client->dev,
 			"%s: INVALID property\n", __func__);
diff --git a/drivers/regulator/max14577.c b/drivers/regulator/max14577.c
index 5d9c605cf53..0ff5a20ac95 100644
--- a/drivers/regulator/max14577.c
+++ b/drivers/regulator/max14577.c
@@ -22,42 +22,6 @@
 #include <linux/mfd/max14577-private.h>
 #include <linux/regulator/of_regulator.h>
 
-/*
- * Valid limits of current for max14577 and max77836 chargers.
- * They must correspond to MBCICHWRCL and MBCICHWRCH fields in CHGCTRL4
- * register for given chipset.
- */
-struct maxim_charger_current {
-	/* Minimal current, set in CHGCTRL4/MBCICHWRCL, uA */
-	unsigned int min;
-	/*
-	 * Minimal current when high setting is active,
-	 * set in CHGCTRL4/MBCICHWRCH, uA
-	 */
-	unsigned int high_start;
-	/* Value of one step in high setting, uA */
-	unsigned int high_step;
-	/* Maximum current of high setting, uA */
-	unsigned int max;
-};
-
-/* Table of valid charger currents for different Maxim chipsets */
-static const struct maxim_charger_current maxim_charger_currents[] = {
-	[MAXIM_DEVICE_TYPE_UNKNOWN] = { 0, 0, 0, 0 },
-	[MAXIM_DEVICE_TYPE_MAX14577] = {
-		.min		= MAX14577_REGULATOR_CURRENT_LIMIT_MIN,
-		.high_start	= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START,
-		.high_step	= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP,
-		.max		= MAX14577_REGULATOR_CURRENT_LIMIT_MAX,
-	},
-	[MAXIM_DEVICE_TYPE_MAX77836] = {
-		.min		= MAX77836_REGULATOR_CURRENT_LIMIT_MIN,
-		.high_start	= MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_START,
-		.high_step	= MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_STEP,
-		.max		= MAX77836_REGULATOR_CURRENT_LIMIT_MAX,
-	},
-};
-
 static int max14577_reg_is_enabled(struct regulator_dev *rdev)
 {
 	int rid = rdev_get_id(rdev);
@@ -103,8 +67,8 @@ static int max14577_reg_get_current_limit(struct regulator_dev *rdev)
 static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
 		int min_uA, int max_uA)
 {
-	int i, current_bits = 0xf;
 	u8 reg_data;
+	int ret;
 	struct max14577 *max14577 = rdev_get_drvdata(rdev);
 	const struct maxim_charger_current *limits =
 		&maxim_charger_currents[max14577->dev_type];
@@ -112,35 +76,9 @@ static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
 	if (rdev_get_id(rdev) != MAX14577_CHARGER)
 		return -EINVAL;
 
-	if (min_uA > limits->max || max_uA < limits->min)
-		return -EINVAL;
-
-	if (max_uA < limits->high_start) {
-		/*
-		 * Less than high_start,
-		 * so set the minimal current (turn only Low Bit off)
-		 */
-		u8 reg_data = 0x0 << CHGCTRL4_MBCICHWRCL_SHIFT;
-		return max14577_update_reg(rdev->regmap,
-				MAX14577_CHG_REG_CHG_CTRL4,
-				CHGCTRL4_MBCICHWRCL_MASK, reg_data);
-	}
-
-	/*
-	 * max_uA is in range: <high_start, inifinite>, so search for
-	 * valid current starting from maximum current.
-	 */
-	for (i = limits->max; i >= limits->high_start; i -= limits->high_step) {
-		if (i <= max_uA)
-			break;
-		current_bits--;
-	}
-	BUG_ON(current_bits < 0); /* Cannot happen */
-
-	/* Turn Low Bit on (use range high_start-max)... */
-	reg_data = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
-	/* and set proper High Bits */
-	reg_data |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT;
+	ret = maxim_charger_calc_reg_current(limits, min_uA, max_uA, &reg_data);
+	if (ret)
+		return ret;
 
 	return max14577_update_reg(rdev->regmap, MAX14577_CHG_REG_CHG_CTRL4,
 			CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
@@ -442,16 +380,6 @@ static struct platform_driver max14577_regulator_driver = {
 
 static int __init max14577_regulator_init(void)
 {
-	/* Check for valid values for charger */
-	BUILD_BUG_ON(MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +
-			MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=
-			MAX14577_REGULATOR_CURRENT_LIMIT_MAX);
-	BUILD_BUG_ON(MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_START +
-			MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=
-			MAX77836_REGULATOR_CURRENT_LIMIT_MAX);
-	/* Valid charger current values must be provided for each chipset */
-	BUILD_BUG_ON(ARRAY_SIZE(maxim_charger_currents) != MAXIM_DEVICE_TYPE_NUM);
-
 	BUILD_BUG_ON(ARRAY_SIZE(max14577_supported_regulators) != MAX14577_REGULATOR_NUM);
 	BUILD_BUG_ON(ARRAY_SIZE(max77836_supported_regulators) != MAX77836_REGULATOR_NUM);