summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-10-25 12:11:02 +0200
committerLinus Torvalds <torvalds@linux-foundation.org>2011-10-25 12:11:02 +0200
commit59e52534172d845ebffb0d7e85fc56fb7b857051 (patch)
tree49552e03f1bdb413cd8b5f7542e91770688d7047 /drivers
parent73692d9bb58ecc2fa73f4b2bfcf6eadaa6d49a26 (diff)
parent0d89e54c8249645404283436d952afc261a04e1e (diff)
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits) MAINTAINERS: linux-m32r is moderated for non-subscribers linux@lists.openrisc.net is moderated for non-subscribers Drop default from "DM365 codec select" choice parisc: Kconfig: cleanup Kernel page size default Kconfig: remove redundant CONFIG_ prefix on two symbols cris: remove arch/cris/arch-v32/lib/nand_init.S microblaze: add missing CONFIG_ prefixes h8300: drop puzzling Kconfig dependencies MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers tty: drop superfluous dependency in Kconfig ARM: mxc: fix Kconfig typo 'i.MX51' Fix file references in Kconfig files aic7xxx: fix Kconfig references to READMEs Fix file references in drivers/ide/ thinkpad_acpi: Fix printk typo 'bluestooth' bcmring: drop commented out line in Kconfig btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888' doc: raw1394: Trivial typo fix CIFS: Don't free volume_info->UNC until we are entirely done with it. treewide: Correct spelling of successfully in comments ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/atm/idt77252.c11
-rw-r--r--drivers/atm/lanai.c3
-rw-r--r--drivers/block/drbd/drbd_bitmap.c5
-rw-r--r--drivers/block/drbd/drbd_int.h3
-rw-r--r--drivers/block/drbd/drbd_nl.c4
-rw-r--r--drivers/block/rbd.c2
-rw-r--r--drivers/block/xen-blkback/common.h1
-rw-r--r--drivers/bluetooth/btmrvl_sdio.c4
-rw-r--r--drivers/char/agp/backend.c3
-rw-r--r--drivers/char/apm-emulation.c5
-rw-r--r--drivers/char/raw.c3
-rw-r--r--drivers/char/rtc.c7
-rw-r--r--drivers/cpufreq/cpufreq_ondemand.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_fence.c2
-rw-r--r--drivers/i2c/busses/i2c-designware.c2
-rw-r--r--drivers/ide/Kconfig2
-rw-r--r--drivers/input/misc/rotary_encoder.c2
-rw-r--r--drivers/isdn/i4l/isdn_common.c4
-rw-r--r--drivers/isdn/mISDN/dsp_core.c3
-rw-r--r--drivers/isdn/mISDN/l1oip_codec.c6
-rw-r--r--drivers/leds/Kconfig2
-rw-r--r--drivers/media/dvb/dvb-usb/af9005-remote.c2
-rw-r--r--drivers/media/dvb/dvb-usb/af9005.c2
-rw-r--r--drivers/media/dvb/frontends/dib3000.h2
-rw-r--r--drivers/media/dvb/frontends/dib3000mb.c2
-rw-r--r--drivers/media/radio/wl128x/fmdrv_v4l2.c2
-rw-r--r--drivers/media/video/cx18/cx18-mailbox.h2
-rw-r--r--drivers/mtd/Kconfig2
-rw-r--r--drivers/net/Kconfig3
-rw-r--r--drivers/net/arm/ks8695net.c2
-rw-r--r--drivers/net/atlx/atl1.c2
-rw-r--r--drivers/net/bnx2.h12
-rw-r--r--drivers/net/can/sja1000/sja1000_of_platform.c2
-rw-r--r--drivers/net/igb/e1000_mbx.c2
-rw-r--r--drivers/net/igbvf/mbx.c2
-rw-r--r--drivers/net/irda/Kconfig2
-rw-r--r--drivers/net/ixgbe/ixgbe_mbx.c2
-rw-r--r--drivers/net/ixgbevf/mbx.c2
-rw-r--r--drivers/net/phy/broadcom.c2
-rw-r--r--drivers/net/sky2.c2
-rw-r--r--drivers/net/tile/tilepro.c2
-rw-r--r--drivers/net/tulip/21142.c3
-rw-r--r--drivers/net/tulip/eeprom.c2
-rw-r--r--drivers/net/tulip/interrupt.c3
-rw-r--r--drivers/net/tulip/media.c3
-rw-r--r--drivers/net/tulip/pnic.c3
-rw-r--r--drivers/net/tulip/pnic2.c3
-rw-r--r--drivers/net/tulip/timer.c3
-rw-r--r--drivers/net/tulip/tulip.h3
-rw-r--r--drivers/net/tulip/tulip_core.c3
-rw-r--r--drivers/net/wireless/ipw2x00/libipw_tx.c2
-rw-r--r--drivers/net/wireless/libertas_tf/deb_defs.h2
-rw-r--r--drivers/net/wireless/rtlwifi/pci.c6
-rw-r--r--drivers/parisc/sba_iommu.c16
-rw-r--r--drivers/platform/x86/Kconfig5
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c2
-rw-r--r--drivers/s390/cio/blacklist.c3
-rw-r--r--drivers/scsi/aacraid/src.c1
-rw-r--r--drivers/scsi/aic7xxx/Kconfig.aic79xx3
-rw-r--r--drivers/scsi/aic7xxx/Kconfig.aic7xxx3
-rw-r--r--drivers/scsi/aic94xx/aic94xx_dump.c2
-rw-r--r--drivers/scsi/bfa/bfad_drv.h1
-rw-r--r--drivers/scsi/cxgbi/cxgb3i/cxgb3i.c1
-rw-r--r--drivers/scsi/cxgbi/cxgb4i/cxgb4i.c1
-rw-r--r--drivers/scsi/fcoe/fcoe.c1
-rw-r--r--drivers/scsi/isci/phy.c2
-rw-r--r--drivers/scsi/megaraid/megaraid_mbox.c2
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_base.c1
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_config.c1
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_ctl.c1
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_scsih.c1
-rw-r--r--drivers/scsi/mvsas/mv_sas.h1
-rw-r--r--drivers/scsi/pmcraid.c1
-rw-r--r--drivers/scsi/pmcraid.h1
-rw-r--r--drivers/scsi/sg.c18
-rw-r--r--drivers/staging/cxt1e1/Kconfig3
-rw-r--r--drivers/staging/iio/addac/adt7316-i2c.c2
-rw-r--r--drivers/staging/iio/dds/ad9832.c2
-rw-r--r--drivers/target/iscsi/iscsi_target_nego.c2
-rw-r--r--drivers/target/target_core_tpg.c2
-rw-r--r--drivers/tty/Kconfig2
-rw-r--r--drivers/tty/serial/mrst_max3110.c2
-rw-r--r--drivers/usb/gadget/langwell_udc.c2
-rw-r--r--drivers/usb/gadget/mv_udc_core.c4
-rw-r--r--drivers/usb/gadget/net2280.c2
-rw-r--r--drivers/usb/gadget/uvc.h1
-rw-r--r--drivers/usb/gadget/uvc_v4l2.c1
-rw-r--r--drivers/usb/musb/musb_gadget.c2
-rw-r--r--drivers/usb/serial/digi_acceleport.c2
-rw-r--r--drivers/usb/serial/mos7720.c1
-rw-r--r--drivers/usb/serial/mos7840.c1
-rw-r--r--drivers/usb/storage/realtek_cr.c1
-rw-r--r--drivers/uwb/uwb-internal.h1
-rw-r--r--drivers/video/igafb.c2
-rw-r--r--drivers/watchdog/smsc37b787_wdt.c2
95 files changed, 104 insertions, 164 deletions
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index db06f34419c..1c052127548 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -3416,27 +3416,28 @@ init_card(struct atm_dev *dev)
size = sizeof(struct vc_map *) * card->tct_size;
IPRINTK("%s: allocate %d byte for VC map.\n", card->name, size);
- if (NULL == (card->vcs = vmalloc(size))) {
+ card->vcs = vzalloc(size);
+ if (!card->vcs) {
printk("%s: memory allocation failure.\n", card->name);
deinit_card(card);
return -1;
}
- memset(card->vcs, 0, size);
size = sizeof(struct vc_map *) * card->scd_size;
IPRINTK("%s: allocate %d byte for SCD to VC mapping.\n",
card->name, size);
- if (NULL == (card->scd2vc = vmalloc(size))) {
+ card->scd2vc = vzalloc(size);
+ if (!card->scd2vc) {
printk("%s: memory allocation failure.\n", card->name);
deinit_card(card);
return -1;
}
- memset(card->scd2vc, 0, size);
size = sizeof(struct tst_info) * (card->tst_size - 2);
IPRINTK("%s: allocate %d byte for TST to VC mapping.\n",
card->name, size);
- if (NULL == (card->soft_tst = vmalloc(size))) {
+ card->soft_tst = vmalloc(size);
+ if (!card->soft_tst) {
printk("%s: memory allocation failure.\n", card->name);
deinit_card(card);
return -1;
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index e828c548749..f5569699f31 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -1457,10 +1457,9 @@ static int __devinit vcc_table_allocate(struct lanai_dev *lanai)
return (lanai->vccs == NULL) ? -ENOMEM : 0;
#else
int bytes = (lanai->num_vci) * sizeof(struct lanai_vcc *);
- lanai->vccs = (struct lanai_vcc **) vmalloc(bytes);
+ lanai->vccs = vzalloc(bytes);
if (unlikely(lanai->vccs == NULL))
return -ENOMEM;
- memset(lanai->vccs, 0, bytes);
return 0;
#endif
}
diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c
index 7b976296b56..912f585a760 100644
--- a/drivers/block/drbd/drbd_bitmap.c
+++ b/drivers/block/drbd/drbd_bitmap.c
@@ -378,15 +378,14 @@ static struct page **bm_realloc_pages(struct drbd_bitmap *b, unsigned long want)
* thread. As we have no disk yet, we are not in the IO path,
* not even the IO path of the peer. */
bytes = sizeof(struct page *)*want;
- new_pages = kmalloc(bytes, GFP_KERNEL);
+ new_pages = kzalloc(bytes, GFP_KERNEL);
if (!new_pages) {
- new_pages = vmalloc(bytes);
+ new_pages = vzalloc(bytes);
if (!new_pages)
return NULL;
vmalloced = 1;
}
- memset(new_pages, 0, bytes);
if (want >= have) {
for (i = 0; i < have; i++)
new_pages[i] = old_pages[i];
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index ef2ceed3be4..1706d60b8c9 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -28,7 +28,6 @@
#include <linux/compiler.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/list.h>
#include <linux/sched.h>
#include <linux/bitops.h>
@@ -928,7 +927,7 @@ struct drbd_md {
#define NL_INT64(pn,pr,member) __u64 member;
#define NL_BIT(pn,pr,member) unsigned member:1;
#define NL_STRING(pn,pr,member,len) unsigned char member[len]; int member ## _len;
-#include "linux/drbd_nl.h"
+#include <linux/drbd_nl.h>
struct drbd_backing_dev {
struct block_device *backing_bdev;
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 0feab261e29..af2a25049bc 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -94,7 +94,7 @@ static int name ## _from_tags(struct drbd_conf *mdev, \
arg->member ## _len = dlen; \
memcpy(arg->member, tags, min_t(size_t, dlen, len)); \
break;
-#include "linux/drbd_nl.h"
+#include <linux/drbd_nl.h>
/* Generate the struct to tag_list functions */
#define NL_PACKET(name, number, fields) \
@@ -129,7 +129,7 @@ name ## _to_tags(struct drbd_conf *mdev, \
put_unaligned(arg->member ## _len, tags++); \
memcpy(tags, arg->member, arg->member ## _len); \
tags = (unsigned short *)((char *)tags + arg->member ## _len);
-#include "linux/drbd_nl.h"
+#include <linux/drbd_nl.h>
void drbd_bcast_ev_helper(struct drbd_conf *mdev, char *helper_name);
void drbd_nl_send_reply(struct cn_msg *, int);
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 15f65b5f3fc..fe3c3249cec 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -192,7 +192,7 @@ static ssize_t rbd_snap_add(struct device *dev,
const char *buf,
size_t count);
static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev,
- struct rbd_snap *snap);;
+ struct rbd_snap *snap);
static struct rbd_device *dev_to_rbd(struct device *dev)
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index 00c57c90e2d..c4bd34063ec 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -27,7 +27,6 @@
#ifndef __XEN_BLKIF__BACKEND__COMMON_H__
#define __XEN_BLKIF__BACKEND__COMMON_H__
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 7f521d4ac65..c827d737cce 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -81,7 +81,7 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8787 = {
.io_port_2 = 0x7a,
};
-static const struct btmrvl_sdio_device btmrvl_sdio_sd6888 = {
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
.helper = "sd8688_helper.bin",
.firmware = "sd8688.bin",
.reg = &btmrvl_reg_8688,
@@ -98,7 +98,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8688 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
- .driver_data = (unsigned long) &btmrvl_sdio_sd6888 },
+ .driver_data = (unsigned long) &btmrvl_sdio_sd8688 },
/* Marvell SD8787 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A),
.driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index f27d0d0816d..4b71647782d 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -171,7 +171,7 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
}
got_gatt = 1;
- bridge->key_list = vmalloc(PAGE_SIZE * 4);
+ bridge->key_list = vzalloc(PAGE_SIZE * 4);
if (bridge->key_list == NULL) {
dev_err(&bridge->dev->dev,
"can't allocate memory for key lists\n");
@@ -181,7 +181,6 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
got_keylist = 1;
/* FIXME vmalloc'd memory not guaranteed contiguous */
- memset(bridge->key_list, 0, PAGE_SIZE * 4);
if (bridge->driver->configure()) {
dev_err(&bridge->dev->dev, "error configuring host chipset\n");
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index 2a2b8fd708c..f4837a893df 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -40,10 +40,7 @@
#define APM_MINOR_DEV 134
/*
- * See Documentation/Config.help for the configuration options.
- *
- * Various options can be changed at boot time as follows:
- * (We allow underscores for compatibility with the modules code)
+ * One option can be changed at boot time as follows:
* apm=on/off enable/disable APM
*/
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index b33e8ea314e..b6de2c04714 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -324,13 +324,12 @@ static int __init raw_init(void)
max_raw_minors = MAX_RAW_MINORS;
}
- raw_devices = vmalloc(sizeof(struct raw_device_data) * max_raw_minors);
+ raw_devices = vzalloc(sizeof(struct raw_device_data) * max_raw_minors);
if (!raw_devices) {
printk(KERN_ERR "Not enough memory for raw device structures\n");
ret = -ENOMEM;
goto error;
}
- memset(raw_devices, 0, sizeof(struct raw_device_data) * max_raw_minors);
ret = register_chrdev_region(dev, max_raw_minors, "raw");
if (ret)
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index dfa8b3062fd..ccd124ab7ca 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -80,6 +80,7 @@
#include <linux/bcd.h>
#include <linux/delay.h>
#include <linux/uaccess.h>
+#include <linux/ratelimit.h>
#include <asm/current.h>
#include <asm/system.h>
@@ -1195,10 +1196,8 @@ static void rtc_dropped_irq(unsigned long data)
spin_unlock_irq(&rtc_lock);
- if (printk_ratelimit()) {
- printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n",
- freq);
- }
+ printk_ratelimited(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n",
+ freq);
/* Now we have new data */
wake_up_interruptible(&rtc_wait);
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 891360edecd..629b3ec698e 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -725,7 +725,7 @@ static int __init cpufreq_gov_dbs_init(void)
dbs_tuners_ins.down_differential =
MICRO_FREQUENCY_DOWN_DIFFERENTIAL;
/*
- * In no_hz/micro accounting case we set the minimum frequency
+ * In nohz/micro accounting case we set the minimum frequency
* not depending on HZ, but fixed (very low). The deferred
* timer might skip some samples if idle/sleeping as needed.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 7fd4e3e5ad5..3475a09f946 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -48,7 +48,7 @@ static void radeon_fence_write(struct radeon_device *rdev, u32 seq)
scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
else
scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
- rdev->wb.wb[scratch_index/4] = cpu_to_le32(seq);;
+ rdev->wb.wb[scratch_index/4] = cpu_to_le32(seq);
} else
WREG32(rdev->fence_drv.scratch_reg, seq);
}
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index b7a51c43b18..1b42b50b599 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -390,7 +390,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
int tx_limit, rx_limit;
u32 addr = msgs[dev->msg_write_idx].addr;
u32 buf_len = dev->tx_buf_len;
- u8 *buf = dev->tx_buf;;
+ u8 *buf = dev->tx_buf;
intr_mask = DW_IC_INTR_DEFAULT_MASK;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 811dbbd9306..76b6d98bd29 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -681,7 +681,7 @@ config BLK_DEV_IDE_AU1XXX
select IDE_XFER_MODE
choice
prompt "IDE Mode for AMD Alchemy Au1200"
- default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
+ default BLK_DEV_IDE_AU1XXX_PIO_DBDMA
depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
config BLK_DEV_IDE_AU1XXX_PIO_DBDMA
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index 2c8b84dd9da..2be21694fac 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -7,7 +7,7 @@
* state machine code inspired by code from Tim Ruetz
*
* A generic driver for rotary encoders connected to GPIO lines.
- * See file:Documentation/input/rotary_encoder.txt for more information
+ * See file:Documentation/input/rotary-encoder.txt for more information
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index 6ed82add6ff..6ddb795e31c 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -2308,11 +2308,11 @@ static int __init isdn_init(void)
int i;
char tmprev[50];
- if (!(dev = vmalloc(sizeof(isdn_dev)))) {
+ dev = vzalloc(sizeof(isdn_dev));
+ if (!dev) {
printk(KERN_WARNING "isdn: Could not allocate device-struct.\n");
return -EIO;
}
- memset((char *) dev, 0, sizeof(isdn_dev));
init_timer(&dev->timer);
dev->timer.function = isdn_timer_funct;
spin_lock_init(&dev->lock);
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 2877291a9ed..0c41553ce68 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -1052,12 +1052,11 @@ dspcreate(struct channel_req *crq)
if (crq->protocol != ISDN_P_B_L2DSP
&& crq->protocol != ISDN_P_B_L2DSPHDLC)
return -EPROTONOSUPPORT;
- ndsp = vmalloc(sizeof(struct dsp));
+ ndsp = vzalloc(sizeof(struct dsp));
if (!ndsp) {
printk(KERN_ERR "%s: vmalloc struct dsp failed\n", __func__);
return -ENOMEM;
}
- memset(ndsp, 0, sizeof(struct dsp));
if (dsp_debug & DEBUG_DSP_CTRL)
printk(KERN_DEBUG "%s: creating new dsp instance\n", __func__);
diff --git a/drivers/isdn/mISDN/l1oip_codec.c b/drivers/isdn/mISDN/l1oip_codec.c
index bbfd1b863ed..5a89972624d 100644
--- a/drivers/isdn/mISDN/l1oip_codec.c
+++ b/drivers/isdn/mISDN/l1oip_codec.c
@@ -330,14 +330,12 @@ l1oip_4bit_alloc(int ulaw)
return 0;
/* alloc conversion tables */
- table_com = vmalloc(65536);
- table_dec = vmalloc(512);
+ table_com = vzalloc(65536);
+ table_dec = vzalloc(512);
if (!table_com || !table_dec) {
l1oip_4bit_free();
return -ENOMEM;
}
- memset(table_com, 0, 65536);
- memset(table_dec, 0, 512);
/* generate compression table */
i1 = 0;
while (i1 < 256) {
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index b591e726a6f..807c875f1c2 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -400,7 +400,7 @@ config LEDS_TRIGGER_TIMER
This allows LEDs to be controlled by a programmable timer
via sysfs. Some LED hardware can be programmed to start
blinking the LED without any further software interaction.
- For more details read Documentation/leds-class.txt.
+ For more details read Documentation/leds/leds-class.txt.
If unsure, say Y.
diff --git a/drivers/media/dvb/dvb-usb/af9005-remote.c b/drivers/media/dvb/dvb-usb/af9005-remote.c
index c3bc64ed405..7e3961d0db6 100644
--- a/drivers/media/dvb/dvb-usb/af9005-remote.c
+++ b/drivers/media/dvb/dvb-usb/af9005-remote.c
@@ -21,7 +21,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * see Documentation/dvb/REDME.dvb-usb for more information
+ * see Documentation/dvb/README.dvb-usb for more information
*/
#include "af9005.h"
/* debug */
diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c
index 51f6439dcfd..0351c0e52dd 100644
--- a/drivers/media/dvb/dvb-usb/af9005.c
+++ b/drivers/media/dvb/dvb-usb/af9005.c
@@ -19,7 +19,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * see Documentation/dvb/REDME.dvb-usb for more information
+ * see Documentation/dvb/README.dvb-usb for more information
*/
#include "af9005.h"
diff --git a/drivers/media/dvb/frontends/dib3000.h b/drivers/media/dvb/frontends/dib3000.h
index ba917359fa6..404f63a6f26 100644
--- a/drivers/media/dvb/frontends/dib3000.h
+++ b/drivers/media/dvb/frontends/dib3000.h
@@ -17,7 +17,7 @@
* Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
* sources, on which this driver (and the dvb-dibusb) are based.
*
- * see Documentation/dvb/README.dibusb for more information
+ * see Documentation/dvb/README.dvb-usb for more information
*
*/
diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c
index e80c5979636..437904cbf3e 100644
--- a/drivers/media/dvb/frontends/dib3000mb.c
+++ b/drivers/media/dvb/frontends/dib3000mb.c
@@ -17,7 +17,7 @@
* Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
* sources, on which this driver (and the dvb-dibusb) are based.
*
- * see Documentation/dvb/README.dibusb for more information
+ * see Documentation/dvb/README.dvb-usb for more information
*
*/
diff --git a/drivers/media/radio/wl128x/fmdrv_v4l2.c b/drivers/media/radio/wl128x/fmdrv_v4l2.c
index 8c0e1927697..ec1d52f3890 100644
--- a/drivers/media/radio/wl128x/fmdrv_v4l2.c
+++ b/drivers/media/radio/wl128x/fmdrv_v4l2.c
@@ -402,7 +402,7 @@ static int fm_v4l2_vidioc_s_hw_freq_seek(struct file *file, void *priv,
static int fm_v4l2_vidioc_g_modulator(struct file *file, void *priv,
struct v4l2_modulator *mod)
{
- struct fmdev *fmdev = video_drvdata(file);;
+ struct fmdev *fmdev = video_drvdata(file);
if (mod->index != 0)
return -EINVAL;
diff --git a/drivers/media/video/cx18/cx18-mailbox.h b/drivers/media/video/cx18/cx18-mailbox.h
index 05fe6bdbe06..b63fdfaac49 100644
--- a/drivers/media/video/cx18/cx18-mailbox.h
+++ b/drivers/media/video/cx18/cx18-mailbox.h
@@ -69,7 +69,7 @@ struct cx18_mailbox {
/* Each command can have up to 6 arguments */
u32 args[MAX_MB_ARGUMENTS];
/* The return code can be one of the codes in the file cx23418.h. If the
- command is completed successfuly, the error will be ERR_SYS_SUCCESS.
+ command is completed successfully, the error will be ERR_SYS_SUCCESS.
If it is pending, the code is ERR_SYS_PENDING. If it failed, the error
code would indicate the task from which the error originated and will
be one of the errors in cx23418.h. In that case, the following
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 4be8373d43e..66b616ebe53 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -142,7 +142,7 @@ config MTD_OF_PARTS
help
This provides a partition parsing function which derives
the partition map from the children of the flash node,
- as described in Documentation/powerpc/booting-without-of.txt.
+ as described in Documentation/devicetree/booting-without-of.txt.
config MTD_AR7_PARTS
tristate "TI AR7 partitioning support"
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a44874e24f2..ddd63e7cf4a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1063,8 +1063,7 @@ config SMSC911X
Say Y here if you want support for SMSC LAN911x and LAN921x families
of ethernet controllers.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called smsc911x.
config SMSC911X_ARCH_HOOKS
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index c827a6097d0..8d0baeceaaa 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -414,7 +414,7 @@ ks8695_tx_irq(int irq, void *dev_id)
* Interrupt Status Register (Offset 0xF208)
* Bit29: WAN MAC Receive Status
* Bit16: LAN MAC Receive Status
- * So, this Rx interrrupt enable/status bit number is equal
+ * So, this Rx interrupt enable/status bit number is equal
* as Rx IRQ number.
*/
static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 97e6954304e..9f3e5306ef7 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -858,7 +858,7 @@ static s32 atl1_init_hw(struct atl1_hw *hw)
atl1_init_flash_opcode(hw);
if (!hw->phy_configured) {
- /* enable GPHY LinkChange Interrrupt */
+ /* enable GPHY LinkChange Interrupt */
ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
if (ret_val)
return ret_val;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index fc50d4267df..99d31a7d6aa 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -5617,7 +5617,7 @@ struct l2_fhdr {
#define BNX2_TXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_TXP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_TXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_TXP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_TXP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_TXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_TXP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_TXP_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -5712,7 +5712,7 @@ struct l2_fhdr {
#define BNX2_TPAT_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_TPAT_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_TPAT_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_TPAT_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_TPAT_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_TPAT_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_TPAT_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_TPAT_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -5807,7 +5807,7 @@ struct l2_fhdr {
#define BNX2_RXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_RXP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_RXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_RXP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_RXP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_RXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_RXP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_RXP_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -5953,7 +5953,7 @@ struct l2_fhdr {
#define BNX2_COM_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_COM_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_COM_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_COM_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_COM_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_COM_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_COM_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_COM_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -6119,7 +6119,7 @@ struct l2_fhdr {
#define BNX2_CP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_CP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_CP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_CP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_CP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_CP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_CP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_CP_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -6291,7 +6291,7 @@ struct l2_fhdr {
#define BNX2_MCP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_MCP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_MCP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_MCP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_MCP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_MCP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_MCP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_MCP_CPU_STATE_BLOCKED_READ (1L<<31)
diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c
index cee6ba2b8b5..c3dd9d09be5 100644
--- a/drivers/net/can/sja1000/sja1000_of_platform.c
+++ b/drivers/net/can/sja1000/sja1000_of_platform.c
@@ -29,7 +29,7 @@
* nxp,external-clock-frequency = <16000000>;
* };
*
- * See "Documentation/powerpc/dts-bindings/can/sja1000.txt" for further
+ * See "Documentation/devicetree/bindings/net/can/sja1000.txt" for further
* information.
*/
diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/igb/e1000_mbx.c
index 74f2f11ac29..469d95eaa15 100644
--- a/drivers/net/igb/e1000_mbx.c
+++ b/drivers/net/igb/e1000_mbx.c
@@ -34,7 +34,7 @@
* @size: Length of buffer
* @mbx_id: id of mailbox to read
*
- * returns SUCCESS if it successfuly read message from buffer
+ * returns SUCCESS if it successfully read message from buffer
**/
s32 igb_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
{
diff --git a/drivers/net/igbvf/mbx.c b/drivers/net/igbvf/mbx.c
index 3d6f4cc3998..048aae248d0 100644
--- a/drivers/net/igbvf/mbx.c
+++ b/drivers/net/igbvf/mbx.c
@@ -288,7 +288,7 @@ out_no_write:
* @msg: The message buffer
* @size: Length of buffer
*
- * returns SUCCESS if it successfuly read message from buffer
+ * returns SUCCESS if it successfully read message from buffer
**/
static s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
{
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 25bb2a015e1..a40fab44b9a 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -183,7 +183,7 @@ config OLD_BELKIN_DONGLE
Say Y here if you want to build support for the Adaptec Airport 1000
and 2000 dongles. If you want to compile it as a module, choose
M here. Some information is contained in the comments
- at the top of <file:drivers/net/irda/old_belkin.c>.
+ at the top of <file:drivers/net/irda/old_belkin-sir.c>.
config ACT200L_DONGLE
tristate "ACTiSYS IR-200L dongle"
diff --git a/drivers/net/ixgbe/ixgbe_mbx.c b/drivers/net/ixgbe/ixgbe_mbx.c
index 1ff0eefcfd0..3f725d48336 100644
--- a/drivers/net/ixgbe/ixgbe_mbx.c
+++ b/drivers/net/ixgbe/ixgbe_mbx.c
@@ -38,7 +38,7 @@
* @size: Length of buffer
* @mbx_id: id of mailbox to read
*
- * returns SUCCESS if it successfuly read message from buffer
+ * returns SUCCESS if it successfully read message from buffer
**/
s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
{
diff --git a/drivers/net/ixgbevf/mbx.c b/drivers/net/ixgbevf/mbx.c
index 7a883312577..930fa83f256 100644
--- a/drivers/net/ixgbevf/mbx.c
+++ b/drivers/net/ixgbevf/mbx.c
@@ -276,7 +276,7 @@ out_no_write:
* @msg: The message buffer
* @size: Length of buffer
*
- * returns 0 if it successfuly read message from buffer
+ * returns 0 if it successfully read message from buffer
**/
static s32 ixgbevf_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size)
{
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index d84c4224dd1..e8be47d6d7d 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -553,7 +553,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
/*
* There is no BCM5481 specification available, so down
* here is everything we know about "register 0x18". This
- * at least helps BCM5481 to successfuly receive packets
+ * at least helps BCM5481 to successfully receive packets
* on MPC8360E-RDK board. Peter Barada <peterb@logicpd.com>
* says: "This sets delay between the RXD and RXC signals
* instead of using trace lengths to achieve timing".
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 57339da7632..d7f879dfb1c 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2057,7 +2057,7 @@ static void sky2_hw_down(struct sky2_port *sky2)
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
- /* Force any delayed status interrrupt and NAPI */
+ /* Force any delayed status interrupt and NAPI */
sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
diff --git a/drivers/net/tile/tilepro.c b/drivers/net/tile/tilepro.c
index 1e2af96fc29..7b46e75deb5 100644
--- a/drivers/net/tile/tilepro.c
+++ b/drivers/net/tile/tilepro.c
@@ -177,7 +177,7 @@ struct tile_net_cpu {
struct tile_net_stats_t stats;
/* True iff NAPI is enabled. */
bool napi_enabled;
- /* True if this tile has succcessfully registered with the IPP. */
+ /* True if this tile has successfully registered with the IPP. */
bool registered;
/* True if the link was down last time we tried to register. */
bool link_down;
diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c
index 092c3faa882..25b8deedbef 100644
--- a/drivers/net/tulip/21142.c
+++ b/drivers/net/tulip/21142.c
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller
Hardware Reference Manual" is currently available at :
http://developer.intel.com/design/network/manuals/278074.htm
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index fa5eee925f2..14d5b611783 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -7,8 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
Please submit bug reports to http://bugzilla.kernel.org/.
*/
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index 5350d753e0f..4fb8c8c0a42 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -7,10 +7,7 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
Please submit bugs to http://bugzilla.kernel.org/ .
-
*/
#include <linux/pci.h>
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index 4bd13922875..beeb17b52ad 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c
index 52d898bdbeb..9c16e4ad02a 100644
--- a/drivers/net/tulip/pnic.c
+++ b/drivers/net/tulip/pnic.c
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index 93358ee4d83..04a7e477eaf 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -8,9 +8,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
index 2017faf2d0e..19078d28ffb 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/tulip/timer.c
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index 9db528967da..fb3887c18dc 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 1246998a677..b905c0dc564 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -6,9 +6,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/wireless/ipw2x00/libipw_tx.c b/drivers/net/wireless/ipw2x00/libipw_tx.c
index 01c88a71abe..e8c039879b0 100644
--- a/drivers/net/wireless/ipw2x00/libipw_tx.c
+++ b/drivers/net/wireless/ipw2x00/libipw_tx.c
@@ -395,7 +395,7 @@ netdev_tx_t libipw_xmit(struct sk_buff *skb, struct net_device *dev)
(CFG_LIBIPW_COMPUTE_FCS | CFG_LIBIPW_RESERVE_FCS))
bytes_per_frag -= LIBIPW_FCS_LEN;
- /* Each fragment may need to have room for encryptiong
+ /* Each fragment may need to have room for encryption
* pre/postfix */
if (host_encrypt)
bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
diff --git a/drivers/net/wireless/libertas_tf/deb_defs.h b/drivers/net/wireless/libertas_tf/deb_defs.h
index ae753962d8b..4bd3dc5adf7 100644
--- a/drivers/net/wireless/libertas_tf/deb_defs.h
+++ b/drivers/net/wireless/libertas_tf/deb_defs.h
@@ -3,7 +3,7 @@
* global variable declaration.
*/
#ifndef _LBS_DEB_DEFS_H_
-#define _LBS_DEB_EFS_H_
+#define _LBS_DEB_DEFS_H_
#ifndef DRV_NAME
#define DRV_NAME "libertas_tf"
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 56f12358389..f8648b7288d 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -488,7 +488,7 @@ static void _rtl_pci_tx_chk_waitq(struct ieee80211_hw *hw)
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct sk_buff *skb = NULL;
struct ieee80211_tx_info *info = NULL;
- int tid; /* should be int */
+ int tid;
if (!rtlpriv->rtlhal.earlymode_enable)
return;
@@ -1538,7 +1538,7 @@ static int rtl_pci_start(struct ieee80211_hw *hw)
rtl_init_rx_config(hw);
- /*should after adapter start and interrupt enable. */
+ /*should be after adapter start and interrupt enable. */
set_hal_start(rtlhal);
RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
@@ -1559,7 +1559,7 @@ static void rtl_pci_stop(struct ieee80211_hw *hw)
u8 RFInProgressTimeOut = 0;
/*
- *should before disable interrrupt&adapter
+ *should be before disable interrupt&adapter
*and will do it immediately.
*/
set_hal_stop(rtlhal);
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 57a6d19eba4..a6f762188bc 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
* @dev: instance of PCI owned by the driver that's asking
* @mask: number of address bits this PCI device can handle
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static int sba_dma_supported( struct device *dev, u64 mask)
{
@@ -680,7 +680,7 @@ static int sba_dma_supported( struct device *dev, u64 mask)
return(0);
}
- /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit
+ /* Documentation/DMA-API-HOWTO.txt tells drivers to try 64-bit
* first, then fall back to 32-bit if that fails.
* We are just "encouraging" 32-bit DMA masks here since we can
* never allow IOMMU bypass unless we add special support for ZX1.
@@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask)
* @size: number of bytes to map in driver buffer.
* @direction: R/W or both.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static dma_addr_t
sba_map_single(struct device *dev, void *addr, size_t size,
@@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size,
* @size: number of bytes mapped in driver buffer.
* @direction: R/W or both.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void
sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
@@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
* @size: number of bytes mapped in driver buffer.
* @dma_handle: IOVA of new buffer.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void *sba_alloc_consistent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
@@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size,
* @vaddr: virtual address IOVA of "consistent" buffer.
* @dma_handler: IO virtual address of "consistent" buffer.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void
sba_free_consistent(struct device *hwdev, size_t size, void *vaddr,
@@ -927,7 +927,7 @@ int dump_run_sg = 0;
* @nents: number of entries in list
* @direction: R/W or both.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static int
sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
@@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
* @nents: number of entries in list
* @direction: R/W or both.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void
sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 1e88d478532..10cf2500522 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -31,9 +31,6 @@ config ACER_WMI
wireless radio and bluetooth control, and on some laptops,
exposes the mail LED and LCD backlight.
- For more information about this driver see
- <file:Documentation/laptops/acer-wmi.txt>
-
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
@@ -164,7 +161,7 @@ config HP_ACCEL
Support for a led indicating disk protection will be provided as
hp::hddprotect. For more information on the feature, refer to
- Documentation/hwmon/lis3lv02d.
+ Documentation/misc-devices/lis3lv02d.
To compile this driver as a module, choose M here: the module will
be called hp_accel.
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 7bd829f247e..7b828680b21 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -4007,7 +4007,7 @@ static void bluetooth_shutdown(void)
pr_notice("failed to save bluetooth state to NVRAM\n");
else
vdbg_printk(TPACPI_DBG_RFKILL,
- "bluestooth state saved to NVRAM\n");
+ "bluetooth state saved to NVRAM\n");
}
static void bluetooth_exit(void)
diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c
index 76058a5166e..08c66035dd1 100644
--- a/drivers/s390/cio/blacklist.c
+++ b/drivers/s390/cio/blacklist.c
@@ -335,10 +335,9 @@ cio_ignore_write(struct file *file, const char __user *user_buf,
return -EINVAL;
if (user_len > 65536)
user_len = 65536;
- buf = vmalloc (user_len + 1); /* maybe better use the stack? */
+ buf = vzalloc(user_len + 1); /* maybe better use the stack? */
if (buf == NULL)
return -ENOMEM;
- memset(buf, 0, user_len + 1);
if (strncpy_from_user (buf, user_buf, user_len) < 0) {
rc = -EFAULT;
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index c2049466060..957595a7a45 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -37,7 +37,6 @@
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
-#include <linux/version.h>
#include <linux/completion.h>
#include <linux/time.h>
#include <linux/interrupt.h>
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 5e6620f8dab..6739069477d 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -31,8 +31,7 @@ config AIC79XX_CMDS_PER_DEVICE
on some devices. The upper bound is 253. 0 disables tagged queueing.
Per device tag depth can be controlled via the kernel command line
- "tag_info" option. See drivers/scsi/aic7xxx/README.aic79xx
- for details.
+ "tag_info" option. See Documentation/scsi/aic79xx.txt for details.
config AIC79XX_RESET_DELAY_MS
int "Initial bus reset delay in milli-seconds"
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 88da670a791..55ac55ee606 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -36,8 +36,7 @@ config AIC7XXX_CMDS_PER_DEVICE
on some devices. The upper bound is 253. 0 disables tagged queueing.
Per device tag depth can be controlled via the kernel command line
- "tag_info" option. See drivers/scsi/aic7xxx/README.aic7xxx
- for details.
+ "tag_info" option. See Documentation/scsi/aic7xxx.txt for details.
config AIC7XXX_RESET_DELAY_MS
int "Initial bus reset delay in milli-seconds"
diff --git a/drivers/scsi/aic94xx/aic94xx_dump.c b/drivers/scsi/aic94xx/aic94xx_dump.c
index 67eeba3bdb0..a16a77c8b9c 100644
--- a/drivers/scsi/aic94xx/aic94xx_dump.c
+++ b/drivers/scsi/aic94xx/aic94xx_dump.c
@@ -29,7 +29,7 @@
*
*/
-#include "linux/pci.h"
+#include <linux/pci.h>
#include "aic94xx.h"
#include "aic94xx_reg.h"
#include "aic94xx_reg_def.h"
diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h
index bda999ad9f5..5e19a5f820e 100644
--- a/drivers/scsi/bfa/bfad_drv.h
+++ b/drivers/scsi/bfa/bfad_drv.h
@@ -27,7 +27,6 @@
#define __BFAD_DRV_H__
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
index f5864485033..1242c7c04a0 100644
--- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
+++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
@@ -14,7 +14,6 @@
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
index ae13c4993aa..31c79bde697 100644
--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -13,7 +13,6 @@
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <scsi/scsi_host.h>
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 5d0e9a24ae9..34c8d82b742 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -18,7 +18,6 @@
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/spinlock.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index 430fc8ff014..09e61134037 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -708,7 +708,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code)
__func__,
event_code);
- return SCI_FAILURE;;
+ return SCI_FAILURE;
}
return SCI_SUCCESS;
case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 2e6619eff3e..8883ca36f93 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -67,7 +67,7 @@
*
* NEC MegaRAID PCI Express ROMB 1000 0408 1033 8287
*
- * For history of changes, see Documentation/ChangeLog.megaraid
+ * For history of changes, see Documentation/scsi/ChangeLog.megaraid
*/
#include <linux/slab.h>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 83035bd1c48..6825772cfd6 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -42,7 +42,6 @@
* USA.
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 6861244249a..2b1101076cf 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -41,7 +41,6 @@
* USA.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 38ed0260959..246d5fbc6e5 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -42,7 +42,6 @@
* USA.
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 6abd2fcc43e..5202de3f3d3 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -41,7 +41,6 @@
* USA.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
index 44d7885a4a1..44b47451322 100644
--- a/drivers/scsi/mvsas/mv_sas.h
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -43,7 +43,6 @@
#include <scsi/scsi.h>
#include <scsi/scsi_tcq.h>
#include <scsi/sas_ata.h>
-#include <linux/version.h>
#include "mv_defs.h"
#define DRV_NAME "mvsas"
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index d079f9a3c6b..b86db84d6f3 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -39,7 +39,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/hdreg.h>
-#include <linux/version.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <asm/irq.h>
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index f920baf3ff2..ca496c7474e 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -24,7 +24,6 @@
#ifndef _PMCRAID_H
#define _PMCRAID_H
-#include <linux/version.h>
#include <linux/types.h>
#include <linux/completion.h>
#include <linux/list.h>
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 909ed9ed24c..441a1c5b897 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -50,6 +50,7 @@ static int sg_version_num = 30534; /* 2 digits for each component */
#include <linux/delay.h>
#include <linux/blktrace_api.h>
#include <linux/mutex.h>
+#include <linux/ratelimit.h>
#include "scsi.h"
#include <scsi/scsi_dbg.h>
@@ -626,14 +627,15 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
*/
if (hp->dxfer_direction == SG_DXFER_TO_FROM_DEV) {
static char cmd[TASK_COMM_LEN];
- if (strcmp(current->comm, cmd) && printk_ratelimit()) {
- printk(KERN_WARNING
- "sg_write: data in/out %d/%d bytes for SCSI command 0x%x--"
- "guessing data in;\n "
- "program %s not setting count and/or reply_len properly\n",
- old_hdr.reply_len - (int)SZ_SG_HEADER,
- input_size, (unsigned int) cmnd[0],
- current->comm);
+ if (strcmp(current->comm, cmd)) {
+ printk_ratelimited(KERN_WARNING
+ "sg_write: data in/out %d/%d bytes "
+ "for SCSI command 0x%x-- guessing "
+ "data in;\n program %s not setting "
+ "count and/or reply_len properly\n",
+ old_hdr.reply_len - (int)SZ_SG_HEADER,
+ input_size, (unsigned int) cmnd[0],
+ current->comm);
strcpy(cmd, current->comm);
}
}
diff --git a/drivers/staging/cxt1e1/Kconfig b/drivers/staging/cxt1e1/Kconfig
index 73430ef6ae2..947f42a65c5 100644
--- a/drivers/staging/cxt1e1/Kconfig
+++ b/drivers/staging/cxt1e1/Kconfig
@@ -6,8 +6,7 @@ config CXT1E1
channelized stream WAN adapter card which contains a HDLC/Transparent
mode controller.
- If you want to compile this driver as a module
- say M here and read <file:Documentation/modules.txt>.
+ If you want to compile this driver as a module say M here.
The module will be called 'cxt1e1'.
If unsure, say N.
diff --git a/drivers/staging/iio/addac/adt7316-i2c.c b/drivers/staging/iio/addac/adt7316-i2c.c
index 52d1ea34963..1c86cf11ab9 100644
--- a/drivers/staging/iio/addac/adt7316-i2c.c
+++ b/drivers/staging/iio/addac/adt7316-i2c.c
@@ -109,7 +109,7 @@ static int __devinit adt7316_i2c_probe(struct i2c_client *client,
static int __devexit adt7316_i2c_remove(struct i2c_client *client)
{
- return adt7316_remove(&client->dev);;
+ return adt7316_remove(&client->dev);
}
static const struct i2c_device_id adt7316_i2c_id[] = {
diff --git a/drivers/staging/iio/dds/ad9832.c b/drivers/staging/iio/dds/ad9832.c
index e3e61a469bb..6f0efe6580e 100644
--- a/drivers/staging/iio/dds/ad9832.c
+++ b/drivers/staging/iio/dds/ad9832.c
@@ -52,7 +52,7 @@ static int ad9832_write_frequency(struct ad9832_state *st,
((addr - 3) << ADD_SHIFT) |
((regval >> 0) & 0xFF));
- return spi_sync(st->spi, &st->freq_msg);;
+ return spi_sync(st->spi, &st->freq_msg);
}
static int ad9832_write_phase(struct ad9832_state *st,
diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c
index 4d087ac1106..426cd4bf6a9 100644
--- a/drivers/target/iscsi/iscsi_target_nego.c
+++ b/drivers/target/iscsi/iscsi_target_nego.c
@@ -504,7 +504,7 @@ static int iscsi_target_do_authentication(
break;
case 1:
pr_debug("iSCSI security negotiation"
- " completed sucessfully.\n");
+ " completed successfully.\n");
login->auth_complete = 1;
if ((login_req->flags & ISCSI_FLAG_LOGIN_NEXT_STAGE1) &&
(login_req->flags & ISCSI_FLAG_LOGIN_TRANSIT)) {
diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index 162b736c734..49fd0a9b0a5 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -593,7 +593,7 @@ int core_tpg_set_initiator_node_queue_depth(
if (init_sess)
tpg->se_tpg_tfo->close_session(init_sess);
- pr_debug("Successfuly changed queue depth to: %d for Initiator"
+ pr_debug("Successfully changed queue depth to: %d for Initiator"
" Node: %s on %s Target Portal Group: %u\n", queue_depth,
initiatorname, tpg->se_tpg_tfo->get_fabric_name(),
tpg->se_tpg_tfo->tpg_get_tag(tpg));
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index bd7cc052799..f462fa5f937 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -62,7 +62,7 @@ config VT_CONSOLE
config HW_CONSOLE
bool
- depends on VT && !S390 && !UML
+ depends on VT && !UML
default y
config VT_HW_CONSOLE_BINDING
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 23bc743f2a2..492c14d63e9 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -23,7 +23,7 @@
* 1 word. If SPI master controller doesn't support sclk frequency change,
* then the char need be sent out one by one with some delay
*
- * 2. Currently only RX available interrrupt is used, no need for waiting TXE
+ * 2. Currently only RX available interrupt is used, no need for waiting TXE
* interrupt for a low speed UART device
*/
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index a06e2c27b43..ff4d40d77c3 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -2969,7 +2969,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev)
handle_port_change(dev);
}
- /* suspend interrrupt */
+ /* suspend interrupt */
if (irq_sts & STS_SLI) {
dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
handle_bus_suspend(dev);
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index ce1ac2bcb31..0b3b8d0462d 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -335,7 +335,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
} else {
/* Write dQH next pointer and terminate bit to 0 */
dqh->next_dtd_ptr = req->head->td_dma
- & EP_QUEUE_HEAD_NEXT_POINTER_MASK;;
+ & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
dqh->size_ioc_int_sts = 0;
/* Ensure that updates to the QH will occur before priming. */
@@ -376,7 +376,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
}
}
done:
- return retval;;
+ return retval;
}
static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 3dd40b4e675..a218a4de5dc 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2481,7 +2481,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED);
/* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set.
- * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and
+ * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and
* both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT
* only indicates a change in the reset state).
*/
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index 5b7919460fd..81971fbc7ea 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -56,6 +56,7 @@ struct uvc_event
#include <linux/usb.h> /* For usb_endpoint_* */
#include <linux/usb/gadget.h>
#include <linux/videodev2.h>
+#include <linux/version.h>
#include <media/v4l2-fh.h>
#include "uvc_queue.h"
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index 52f8f9e513a..cfb58384394 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -16,7 +16,6 @@
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/mutex.h>
-#include <linux/version.h>
#include <linux/videodev2.h>
#include <linux/vmalloc.h>
#include <linux/wait.h>
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index e81820370d6..fe8d14cac43 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -704,7 +704,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
* most these gadgets, end of is signified either by a short packet,
* or filling the last byte of the buffer. (Sending extra data in
* that last pckate should trigger an overflow fault.) But in mode 1,
- * we don't get DMA completion interrrupt for short packets.
+ * we don't get DMA completion interrupt for short packets.
*
* Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
* to get endpoint interrupt on every DMA req, but that didn't seem
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 86fbba6336c..e92cbefc0f8 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -227,7 +227,7 @@
* - All sleeps use a timeout of DIGI_RETRY_TIMEOUT before looping to
* recheck the condition they are sleeping on. This is defensive,
* in case a wake up is lost.
-* - Following Documentation/DocBook/kernel-locking.pdf no spin locks
+* - Following Documentation/DocBook/kernel-locking.tmpl no spin locks
* are held when calling copy_to/from_user or printk.
*/
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 40abedbc594..3524a105d04 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -2006,7 +2006,6 @@ static int mos7720_ioctl(struct tty_struct *tty,
dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
return get_lsr_info(tty, mos7720_port,
(unsigned int __user *)arg);
- return 0;
/* FIXME: These should be using the mode methods */
case TIOCMBIS:
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 7b50aa12275..c72abd52498 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2263,7 +2263,6 @@ static int mos7840_ioctl(struct tty_struct *tty,
case TIOCSERGETLSR:
dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
return mos7840_get_lsr_info(tty, argp);
- return 0;
case TIOCGSERIAL:
dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 34adc4b42ce..6fd13068481 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -25,7 +25,6 @@
#include <linux/kthread.h>
#include <linux/sched.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
diff --git a/drivers/uwb/uwb-internal.h b/drivers/uwb/uwb-internal.h
index 157485c862c..a7494bf1008 100644
--- a/drivers/uwb/uwb-internal.h
+++ b/drivers/uwb/uwb-internal.h
@@ -28,7 +28,6 @@
#ifndef __UWB_INTERNAL_H__
#define __UWB_INTERNAL_H__
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/uwb.h>
diff --git a/drivers/video/igafb.c b/drivers/video/igafb.c
index d885c770eb8..2d97752f79a 100644
--- a/drivers/video/igafb.c
+++ b/drivers/video/igafb.c
@@ -428,7 +428,7 @@ static int __init igafb_init(void)
*
* IGS2000 has its I/O memory mapped and we want
* to generate memory cycles on PCI, e.g. do ioremap(),
- * then readb/writeb() as in Documentation/IO-mapping.txt.
+ * then readb/writeb() as in Documentation/io-mapping.txt.
*
* IGS1682 is more traditional, it responds to PCI I/O
* cycles, so we want to access it with inb()/outb().
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index e97b0499bd0..97b8184614a 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -40,7 +40,7 @@
* mknod /dev/watchdog c 10 130
*
* For an example userspace keep-alive daemon, see:
- * Documentation/watchdog/watchdog.txt
+ * Documentation/watchdog/wdt.txt
*/
#include <linux/module.h>