summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorHiep Cao Minh <cm-hiep@jinso.co.jp>2013-09-03 13:10:26 +0900
committerMark Brown <broonie@linaro.org>2013-09-17 00:22:50 +0100
commit5ce0ba88650f2606244a761d92e2b725f4ab3583 (patch)
treee82cb9821e68d81ecbef0ca874458c5f40138b9f /drivers
parent272b98c6455f00884f0350f775c5342358ebb73f (diff)
spi: rcar: add Renesas QSPI support on RSPI
The R8A7790 has QSPI module which is very similar to RSPI. This patch adds into RSPI module together to supports QSPI module. Signed-off-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Signed-off-by: Mark Brown <broonie@linaro.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/spi/Kconfig2
-rw-r--r--drivers/spi/spi-rspi.c183
2 files changed, 143 insertions, 42 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index b9c53cc40e1..738facf9059 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -369,7 +369,7 @@ config SPI_PXA2XX_PCI
config SPI_RSPI
tristate "Renesas RSPI controller"
- depends on SUPERH && SH_DMAE_BASE
+ depends on (SUPERH || ARCH_SHMOBILE) && SH_DMAE_BASE
help
SPI driver for Renesas RSPI blocks.
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 8719206a03a..4c8dbac11b4 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -59,6 +59,14 @@
#define RSPI_SPCMD6 0x1c
#define RSPI_SPCMD7 0x1e
+/*qspi only */
+#define QSPI_SPBFCR 0x18
+#define QSPI_SPBDCR 0x1a
+#define QSPI_SPBMUL0 0x1c
+#define QSPI_SPBMUL1 0x20
+#define QSPI_SPBMUL2 0x24
+#define QSPI_SPBMUL3 0x28
+
/* SPCR */
#define SPCR_SPRIE 0x80
#define SPCR_SPE 0x40
@@ -126,6 +134,8 @@
#define SPCMD_LSBF 0x1000
#define SPCMD_SPB_MASK 0x0f00
#define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK)
+#define SPCMD_SPB_8BIT 0x0000 /* qspi only */
+#define SPCMD_SPB_16BIT 0x0100
#define SPCMD_SPB_20BIT 0x0000
#define SPCMD_SPB_24BIT 0x0100
#define SPCMD_SPB_32BIT 0x0200
@@ -135,6 +145,10 @@
#define SPCMD_CPOL 0x0002
#define SPCMD_CPHA 0x0001
+/* SPBFCR */
+#define SPBFCR_TXRST 0x80 /* qspi only */
+#define SPBFCR_RXRST 0x40 /* qspi only */
+
struct rspi_data {
void __iomem *addr;
u32 max_speed_hz;
@@ -145,6 +159,7 @@ struct rspi_data {
spinlock_t lock;
struct clk *clk;
unsigned char spsr;
+ const struct spi_ops *ops;
/* for dmaengine */
struct dma_chan *chan_tx;
@@ -165,6 +180,11 @@ static void rspi_write16(struct rspi_data *rspi, u16 data, u16 offset)
iowrite16(data, rspi->addr + offset);
}
+static void rspi_write32(struct rspi_data *rspi, u32 data, u16 offset)
+{
+ iowrite32(data, rspi->addr + offset);
+}
+
static u8 rspi_read8(struct rspi_data *rspi, u16 offset)
{
return ioread8(rspi->addr + offset);
@@ -175,17 +195,98 @@ static u16 rspi_read16(struct rspi_data *rspi, u16 offset)
return ioread16(rspi->addr + offset);
}
-static unsigned char rspi_calc_spbr(struct rspi_data *rspi)
+/* optional functions */
+struct spi_ops {
+ int (*set_config_register)(struct rspi_data *rspi, int access_size);
+};
+
+/*
+ * functions for RSPI
+ */
+static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
{
- int tmp;
- unsigned char spbr;
+ int spbr;
+
+ /* Sets output mode(CMOS) and MOSI signal(from previous transfer) */
+ rspi_write8(rspi, 0x00, RSPI_SPPCR);
- tmp = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz) - 1;
- spbr = clamp(tmp, 0, 255);
+ /* Sets transfer bit rate */
+ spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz) - 1;
+ rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
+
+ /* Sets number of frames to be used: 1 frame */
+ rspi_write8(rspi, 0x00, RSPI_SPDCR);
- return spbr;
+ /* Sets RSPCK, SSL, next-access delay value */
+ rspi_write8(rspi, 0x00, RSPI_SPCKD);
+ rspi_write8(rspi, 0x00, RSPI_SSLND);
+ rspi_write8(rspi, 0x00, RSPI_SPND);
+
+ /* Sets parity, interrupt mask */
+ rspi_write8(rspi, 0x00, RSPI_SPCR2);
+
+ /* Sets SPCMD */
+ rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | SPCMD_SSLKP,
+ RSPI_SPCMD0);
+
+ /* Sets RSPI mode */
+ rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
+
+ return 0;
}
+/*
+ * functions for QSPI
+ */
+static int qspi_set_config_register(struct rspi_data *rspi, int access_size)
+{
+ u16 spcmd;
+ int spbr;
+
+ /* Sets output mode(CMOS) and MOSI signal(from previous transfer) */
+ rspi_write8(rspi, 0x00, RSPI_SPPCR);
+
+ /* Sets transfer bit rate */
+ spbr = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz);
+ rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
+
+ /* Sets number of frames to be used: 1 frame */
+ rspi_write8(rspi, 0x00, RSPI_SPDCR);
+
+ /* Sets RSPCK, SSL, next-access delay value */
+ rspi_write8(rspi, 0x00, RSPI_SPCKD);
+ rspi_write8(rspi, 0x00, RSPI_SSLND);
+ rspi_write8(rspi, 0x00, RSPI_SPND);
+
+ /* Data Length Setting */
+ if (access_size == 8)
+ spcmd = SPCMD_SPB_8BIT;
+ else if (access_size == 16)
+ spcmd = SPCMD_SPB_16BIT;
+ else if (access_size == 32)
+ spcmd = SPCMD_SPB_32BIT;
+
+ spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | SPCMD_SSLKP | SPCMD_SPNDEN;
+
+ /* Resets transfer data length */
+ rspi_write32(rspi, 0, QSPI_SPBMUL0);
+
+ /* Resets transmit and receive buffer */
+ rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR);
+ /* Sets buffer to allow normal operation */
+ rspi_write8(rspi, 0x00, QSPI_SPBFCR);
+
+ /* Sets SPCMD */
+ rspi_write16(rspi, spcmd, RSPI_SPCMD0);
+
+ /* Enables SPI function in a master mode */
+ rspi_write8(rspi, SPCR_SPE | SPCR_MSTR, RSPI_SPCR);
+
+ return 0;
+}
+
+#define set_config_register(spi, n) spi->ops->set_config_register(spi, n)
+
static void rspi_enable_irq(struct rspi_data *rspi, u8 enable)
{
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | enable, RSPI_SPCR);
@@ -220,35 +321,6 @@ static void rspi_negate_ssl(struct rspi_data *rspi)
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR);
}
-static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
-{
- /* Sets output mode(CMOS) and MOSI signal(from previous transfer) */
- rspi_write8(rspi, 0x00, RSPI_SPPCR);
-
- /* Sets transfer bit rate */
- rspi_write8(rspi, rspi_calc_spbr(rspi), RSPI_SPBR);
-
- /* Sets number of frames to be used: 1 frame */
- rspi_write8(rspi, 0x00, RSPI_SPDCR);
-
- /* Sets RSPCK, SSL, next-access delay value */
- rspi_write8(rspi, 0x00, RSPI_SPCKD);
- rspi_write8(rspi, 0x00, RSPI_SSLND);
- rspi_write8(rspi, 0x00, RSPI_SPND);
-
- /* Sets parity, interrupt mask */
- rspi_write8(rspi, 0x00, RSPI_SPCR2);
-
- /* Sets SPCMD */
- rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | SPCMD_SSLKP,
- RSPI_SPCMD0);
-
- /* Sets RSPI mode */
- rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
-
- return 0;
-}
-
static int rspi_send_pio(struct rspi_data *rspi, struct spi_message *mesg,
struct spi_transfer *t)
{
@@ -616,7 +688,7 @@ static int rspi_setup(struct spi_device *spi)
spi->bits_per_word = 8;
rspi->max_speed_hz = spi->max_speed_hz;
- rspi_set_config_register(rspi, 8);
+ set_config_register(rspi, 8);
return 0;
}
@@ -745,7 +817,16 @@ static int rspi_probe(struct platform_device *pdev)
struct rspi_data *rspi;
int ret, irq;
char clk_name[16];
-
+ struct rspi_plat_data *rspi_pd = pdev->dev.platform_data;
+ const struct spi_ops *ops;
+ const struct platform_device_id *id_entry = pdev->id_entry;
+
+ ops = (struct spi_ops *)id_entry->driver_data;
+ /* ops parameter check */
+ if (!ops->set_config_register) {
+ dev_err(&pdev->dev, "there is no set_config_register\n");
+ return -ENODEV;
+ }
/* get base addr */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(res == NULL)) {
@@ -767,7 +848,7 @@ static int rspi_probe(struct platform_device *pdev)
rspi = spi_master_get_devdata(master);
platform_set_drvdata(pdev, rspi);
-
+ rspi->ops = ops;
rspi->master = master;
rspi->addr = ioremap(res->start, resource_size(res));
if (rspi->addr == NULL) {
@@ -776,7 +857,7 @@ static int rspi_probe(struct platform_device *pdev)
goto error1;
}
- snprintf(clk_name, sizeof(clk_name), "rspi%d", pdev->id);
+ snprintf(clk_name, sizeof(clk_name), "%s%d", id_entry->name, pdev->id);
rspi->clk = clk_get(&pdev->dev, clk_name);
if (IS_ERR(rspi->clk)) {
dev_err(&pdev->dev, "cannot get clock\n");
@@ -790,7 +871,10 @@ static int rspi_probe(struct platform_device *pdev)
INIT_WORK(&rspi->ws, rspi_work);
init_waitqueue_head(&rspi->wait);
- master->num_chipselect = 2;
+ master->num_chipselect = rspi_pd->num_chipselect;
+ if (!master->num_chipselect)
+ master->num_chipselect = 2; /* default */
+
master->bus_num = pdev->id;
master->setup = rspi_setup;
master->transfer = rspi_transfer;
@@ -832,11 +916,28 @@ error1:
return ret;
}
+static struct spi_ops rspi_ops = {
+ .set_config_register = rspi_set_config_register,
+};
+
+static struct spi_ops qspi_ops = {
+ .set_config_register = qspi_set_config_register,
+};
+
+static struct platform_device_id spi_driver_ids[] = {
+ { "rspi", (kernel_ulong_t)&rspi_ops },
+ { "qspi", (kernel_ulong_t)&qspi_ops },
+ {},
+};
+
+MODULE_DEVICE_TABLE(platform, spi_driver_ids);
+
static struct platform_driver rspi_driver = {
.probe = rspi_probe,
.remove = rspi_remove,
+ .id_table = spi_driver_ids,
.driver = {
- .name = "rspi",
+ .name = "renesas_spi",
.owner = THIS_MODULE,
},
};