diff options
| author | David S. Miller <davem@davemloft.net> | 2012-12-01 11:27:31 -0500 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2012-12-01 11:27:31 -0500 |
| commit | a20da984fb5ddedb9e8e699c04e10fe0ca609440 (patch) | |
| tree | 3b1e17c43777a3ecd488e89859cb5be201729494 /drivers | |
| parent | ce43b03e8889475817d427b1f3724c7e294b76eb (diff) | |
| parent | ed83da12ee742da8cefa784def3af64e4e195462 (diff) | |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
Jeff Kirsher says:
====================
This series contains updates to ixgbe, igb and e1000e. Majority of the
changes are against igb.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
23 files changed, 823 insertions, 984 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index 4dd18a1f45d..e73c2c35599 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -26,8 +26,7 @@ *******************************************************************************/ -/* - * 80003ES2LAN Gigabit Ethernet Controller (Copper) +/* 80003ES2LAN Gigabit Ethernet Controller (Copper) * 80003ES2LAN Gigabit Ethernet Controller (Serdes) */ @@ -80,7 +79,8 @@ 1 = 50-80M 2 = 80-110M 3 = 110-140M - 4 = >140M */ + 4 = >140M + */ /* Kumeran Mode Control Register (Page 193, Register 16) */ #define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800 @@ -95,8 +95,7 @@ /* In-Band Control Register (Page 194, Register 18) */ #define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */ -/* - * A table for the GG82563 cable length where the range is defined +/* A table for the GG82563 cable length where the range is defined * with a lower bound at "index" and the upper bound at * "index + 5". */ @@ -183,8 +182,7 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw) size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> E1000_EECD_SIZE_EX_SHIFT); - /* - * Added to a constant, "size" becomes the left-shift value + /* Added to a constant, "size" becomes the left-shift value * for setting word_size. */ size += NVM_WORD_SIZE_BASE_SHIFT; @@ -375,8 +373,7 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask) if (!(swfw_sync & (fwmask | swmask))) break; - /* - * Firmware currently using resource (fwmask) + /* Firmware currently using resource (fwmask) * or other software thread using resource (swmask) */ e1000e_put_hw_semaphore(hw); @@ -442,8 +439,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) { page_select = GG82563_PHY_PAGE_SELECT; } else { - /* - * Use Alternative Page Select register to access + /* Use Alternative Page Select register to access * registers 30 and 31 */ page_select = GG82563_PHY_PAGE_SELECT_ALT; @@ -457,8 +453,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, } if (hw->dev_spec.e80003es2lan.mdic_wa_enable) { - /* - * The "ready" bit in the MDIC register may be incorrectly set + /* The "ready" bit in the MDIC register may be incorrectly set * before the device has completed the "Page Select" MDI * transaction. So we wait 200us after each MDI command... */ @@ -513,8 +508,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) { page_select = GG82563_PHY_PAGE_SELECT; } else { - /* - * Use Alternative Page Select register to access + /* Use Alternative Page Select register to access * registers 30 and 31 */ page_select = GG82563_PHY_PAGE_SELECT_ALT; @@ -528,8 +522,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, } if (hw->dev_spec.e80003es2lan.mdic_wa_enable) { - /* - * The "ready" bit in the MDIC register may be incorrectly set + /* The "ready" bit in the MDIC register may be incorrectly set * before the device has completed the "Page Select" MDI * transaction. So we wait 200us after each MDI command... */ @@ -618,8 +611,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) u16 phy_data; bool link; - /* - * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI + /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI * forced whenever speed and duplex are forced. */ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); @@ -657,8 +649,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) return ret_val; if (!link) { - /* - * We didn't get link. + /* We didn't get link. * Reset the DSP and cross our fingers. */ ret_val = e1000e_phy_reset_dsp(hw); @@ -677,8 +668,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * Resetting the phy means we need to verify the TX_CLK corresponds + /* Resetting the phy means we need to verify the TX_CLK corresponds * to the link speed. 10Mbps -> 2.5MHz, else 25MHz. */ phy_data &= ~GG82563_MSCR_TX_CLK_MASK; @@ -687,8 +677,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) else phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25; - /* - * In addition, we must re-enable CRS on Tx for both half and full + /* In addition, we must re-enable CRS on Tx for both half and full * duplex. */ phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX; @@ -766,8 +755,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) s32 ret_val; u16 kum_reg_data; - /* - * Prevent the PCI-E bus from sticking if there is no TLP connection + /* Prevent the PCI-E bus from sticking if there is no TLP connection * on the last TLP read/write transaction when MAC is reset. */ ret_val = e1000e_disable_pcie_master(hw); @@ -899,8 +887,7 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw) hw->dev_spec.e80003es2lan.mdic_wa_enable = false; } - /* - * Clear all of the statistics registers (clear on read). It is + /* Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there * is no link. @@ -945,8 +932,7 @@ static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw) reg |= (1 << 28); ew32(TARC(1), reg); - /* - * Disable IPv6 extension header parsing because some malformed + /* Disable IPv6 extension header parsing because some malformed * IPv6 headers can hang the Rx. */ reg = er32(RFCTL); @@ -979,8 +965,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * Options: + /* Options: * MDI/MDI-X = 0 (default) * 0 - Auto for all speeds * 1 - MDI mode @@ -1006,8 +991,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) break; } - /* - * Options: + /* Options: * disable_polarity_correction = 0 (default) * Automatic Correction for Reversed Cable Polarity * 0 - Disabled @@ -1065,8 +1049,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * Do not init these registers when the HW is in IAMT mode, since the + /* Do not init these registers when the HW is in IAMT mode, since the * firmware will have already initialized them. We only initialize * them if the HW is not in IAMT mode. */ @@ -1087,8 +1070,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) return ret_val; } - /* - * Workaround: Disable padding in Kumeran interface in the MAC + /* Workaround: Disable padding in Kumeran interface in the MAC * and in the PHY to avoid CRC errors. */ ret_val = e1e_rphy(hw, GG82563_PHY_INBAND_CTRL, &data); @@ -1121,8 +1103,7 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw) ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); ew32(CTRL, ctrl); - /* - * Set the mac to wait the maximum time between each + /* Set the mac to wait the maximum time between each * iteration and increase the max iterations when * polling the phy; this fixes erroneous timeouts at 10Mbps. */ @@ -1352,8 +1333,7 @@ static s32 e1000_read_mac_addr_80003es2lan(struct e1000_hw *hw) { s32 ret_val = 0; - /* - * If there's an alternate MAC address place it in RAR0 + /* If there's an alternate MAC address place it in RAR0 * so that it will override the Si installed default perm * address. */ diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index c9858640800..c77d010d5c5 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -26,8 +26,7 @@ *******************************************************************************/ -/* - * 82571EB Gigabit Ethernet Controller +/* 82571EB Gigabit Ethernet Controller * 82571EB Gigabit Ethernet Controller (Copper) * 82571EB Gigabit Ethernet Controller (Fiber) * 82571EB Dual Port Gigabit Mezzanine Adapter @@ -191,8 +190,7 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) if (((eecd >> 15) & 0x3) == 0x3) { nvm->type = e1000_nvm_flash_hw; nvm->word_size = 2048; - /* - * Autonomous Flash update bit must be cleared due + /* Autonomous Flash update bit must be cleared due * to Flash update issue. */ eecd &= ~E1000_EECD_AUPDEN; @@ -204,8 +202,7 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) nvm->type = e1000_nvm_eeprom_spi; size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> E1000_EECD_SIZE_EX_SHIFT); - /* - * Added to a constant, "size" becomes the left-shift value + /* Added to a constant, "size" becomes the left-shift value * for setting word_size. */ size += NVM_WORD_SIZE_BASE_SHIFT; @@ -291,8 +288,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_hw *hw) /* FWSM register */ mac->has_fwsm = true; - /* - * ARC supported; valid only if manageability features are + /* ARC supported; valid only if manageability features are * enabled. */ mac->arc_subsystem_valid = !!(er32(FWSM) & @@ -314,8 +310,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_hw *hw) break; } - /* - * Ensure that the inter-port SWSM.SMBI lock bit is clear before + /* Ensure that the inter-port SWSM.SMBI lock bit is clear before * first NVM or PHY access. This should be done for single-port * devices, and for one port only on dual-port devices so that * for those devices we can still use the SMBI lock to synchronize @@ -352,11 +347,8 @@ static s32 e1000_init_mac_params_82571(struct e1000_hw *hw) ew32(SWSM, swsm & ~E1000_SWSM_SMBI); } - /* - * Initialize device specific counter of SMBI acquisition - * timeouts. - */ - hw->dev_spec.e82571.smb_counter = 0; + /* Initialize device specific counter of SMBI acquisition timeouts. */ + hw->dev_spec.e82571.smb_counter = 0; return 0; } @@ -445,8 +437,7 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82571: case e1000_82572: - /* - * The 82571 firmware may still be configuring the PHY. + /* The 82571 firmware may still be configuring the PHY. * In this case, we cannot access the PHY until the * configuration is done. So we explicitly set the * PHY ID. @@ -492,8 +483,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) s32 fw_timeout = hw->nvm.word_size + 1; s32 i = 0; - /* - * If we have timedout 3 times on trying to acquire + /* If we have timedout 3 times on trying to acquire * the inter-port SMBI semaphore, there is old code * operating on the other port, and it is not * releasing SMBI. Modify the number of times that @@ -787,8 +777,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * If our nvm is an EEPROM, then we're done + /* If our nvm is an EEPROM, then we're done * otherwise, commit the checksum to the flash NVM. */ if (hw->nvm.type != e1000_nvm_flash_hw) @@ -806,8 +795,7 @@ static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) /* Reset the firmware if using STM opcode. */ if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) { - /* - * The enabling of and the actual reset must be done + /* The enabling of and the actual reset must be done * in two write cycles. */ ew32(HICR, E1000_HICR_FW_RESET_ENABLE); @@ -867,8 +855,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u32 i, eewr = 0; s32 ret_val = 0; - /* - * A check for invalid values: offset too large, too many words, + /* A check for invalid values: offset too large, too many words, * and not enough words. */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || @@ -957,8 +944,7 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) } else { data &= ~IGP02E1000_PM_D0_LPLU; ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable * SmartSpeed, so performance is maintained. @@ -1002,8 +988,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) u32 ctrl, ctrl_ext, eecd, tctl; s32 ret_val; - /* - * Prevent the PCI-E bus from sticking if there is no TLP connection + /* Prevent the PCI-E bus from sticking if there is no TLP connection * on the last TLP read/write transaction when MAC is reset. */ ret_val = e1000e_disable_pcie_master(hw); @@ -1021,8 +1006,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) usleep_range(10000, 20000); - /* - * Must acquire the MDIO ownership before MAC reset. + /* Must acquire the MDIO ownership before MAC reset. * Ownership defaults to firmware after a reset. */ switch (hw->mac.type) { @@ -1067,8 +1051,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) /* We don't want to continue accessing MAC registers. */ return ret_val; - /* - * Phy configuration from NVM just starts after EECD_AUTO_RD is set. + /* Phy configuration from NVM just starts after EECD_AUTO_RD is set. * Need to wait for Phy configuration completion before accessing * NVM and Phy. */ @@ -1076,8 +1059,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82571: case e1000_82572: - /* - * REQ and GNT bits need to be cleared when using AUTO_RD + /* REQ and GNT bits need to be cleared when using AUTO_RD * to access the EEPROM. */ eecd = er32(EECD); @@ -1138,8 +1120,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) e_dbg("Initializing the IEEE VLAN\n"); mac->ops.clear_vfta(hw); - /* Setup the receive address. */ - /* + /* Setup the receive address. * If, however, a locally administered address was assigned to the * 82571, we must reserve a RAR for it to work around an issue where * resetting one port will reload the MAC on the other port. @@ -1183,8 +1164,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) break; } - /* - * Clear all of the statistics registers (clear on read). It is + /* Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there * is no link. @@ -1281,8 +1261,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) ew32(PBA_ECC, reg); } - /* - * Workaround for hardware errata. + /* Workaround for hardware errata. * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572 */ if ((hw->mac.type == e1000_82571) || (hw->mac.type == e1000_82572)) { @@ -1291,8 +1270,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) ew32(CTRL_EXT, reg); } - /* - * Disable IPv6 extension header parsing because some malformed + /* Disable IPv6 extension header parsing because some malformed * IPv6 headers can hang the Rx. */ if (hw->mac.type <= e1000_82573) { @@ -1309,8 +1287,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) reg |= (1 << 22); ew32(GCR, reg); - /* - * Workaround for hardware errata. + /* Workaround for hardware errata. * apply workaround for hardware errata documented in errata * docs Fixes issue where some error prone or unreliable PCIe * completions are occurring, particularly with ASPM enabled. @@ -1344,8 +1321,7 @@ static void e1000_clear_vfta_82571(struct e1000_hw *hw) case e1000_82574: case e1000_82583: if (hw->mng_cookie.vlan_id != 0) { - /* - * The VFTA is a 4096b bit-field, each identifying + /* The VFTA is a 4096b bit-field, each identifying * a single VLAN ID. The following operations * determine which 32b entry (i.e. offset) into the * array we want to set the VLAN ID (i.e. bit) of @@ -1362,8 +1338,7 @@ static void e1000_clear_vfta_82571(struct e1000_hw *hw) break; } for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { - /* - * If the offset we want to clear is the same offset of the + /* If the offset we want to clear is the same offset of the * manageability VLAN ID, then clear all bits except that of * the manageability unit. */ @@ -1401,8 +1376,7 @@ static s32 e1000_led_on_82574(struct e1000_hw *hw) ctrl = hw->mac.ledctl_mode2; if (!(E1000_STATUS_LU & er32(STATUS))) { - /* - * If no link, then turn LED on by setting the invert bit + /* If no link, then turn LED on by setting the invert bit * for each LED that's "on" (0x0E) in ledctl_mode2. */ for (i = 0; i < 4; i++) @@ -1427,8 +1401,7 @@ bool e1000_check_phy_82574(struct e1000_hw *hw) u16 receive_errors = 0; s32 ret_val = 0; - /* - * Read PHY Receive Error counter first, if its is max - all F's then + /* Read PHY Receive Error counter first, if its is max - all F's then * read the Base1000T status register If both are max then PHY is hung. */ ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors); @@ -1458,8 +1431,7 @@ bool e1000_check_phy_82574(struct e1000_hw *hw) **/ static s32 e1000_setup_link_82571(struct e1000_hw *hw) { - /* - * 82573 does not have a word in the NVM to determine + /* 82573 does not have a word in the NVM to determine * the default flow control setting, so we explicitly * set it to full. */ @@ -1526,8 +1498,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82571: case e1000_82572: - /* - * If SerDes loopback mode is entered, there is no form + /* If SerDes loopback mode is entered, there is no form * of reset to take the adapter out of that mode. So we * have to explicitly take the adapter out of loopback * mode. This prevents drivers from twiddling their thumbs @@ -1584,8 +1555,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) switch (mac->serdes_link_state) { case e1000_serdes_link_autoneg_complete: if (!(status & E1000_STATUS_LU)) { - /* - * We have lost link, retry autoneg before + /* We have lost link, retry autoneg before * reporting link failure */ mac->serdes_link_state = @@ -1598,8 +1568,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) break; case e1000_serdes_link_forced_up: - /* - * If we are receiving /C/ ordered sets, re-enable + /* If we are receiving /C/ ordered sets, re-enable * auto-negotiation in the TXCW register and disable * forced link in the Device Control register in an * attempt to auto-negotiate with our link partner. @@ -1619,8 +1588,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) case e1000_serdes_link_autoneg_progress: if (rxcw & E1000_RXCW_C) { - /* - * We received /C/ ordered sets, meaning the + /* We received /C/ ordered sets, meaning the * link partner has autonegotiated, and we can * trust the Link Up (LU) status bit. */ @@ -1636,8 +1604,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) e_dbg("AN_PROG -> DOWN\n"); } } else { - /* - * The link partner did not autoneg. + /* The link partner did not autoneg. * Force link up and full duplex, and change * state to forced. */ @@ -1660,8 +1627,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) case e1000_serdes_link_down: default: - /* - * The link was down but the receiver has now gained + /* The link was down but the receiver has now gained * valid sync, so lets see if we can bring the link * up. */ @@ -1679,8 +1645,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) mac->serdes_link_state = e1000_serdes_link_down; e_dbg("ANYSTATE -> DOWN\n"); } else { - /* - * Check several times, if SYNCH bit and CONFIG + /* Check several times, if SYNCH bit and CONFIG * bit both are consistently 1 then simply ignore * the IV bit and restart Autoneg */ @@ -1780,8 +1745,7 @@ void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) /* If workaround is activated... */ if (state) - /* - * Hold a copy of the LAA in RAR[14] This is done so that + /* Hold a copy of the LAA in RAR[14] This is done so that * between the time RAR[0] gets clobbered and the time it * gets fixed, the actual LAA is in one of the RARs and no * incoming packets directed to this port are dropped. @@ -1810,8 +1774,7 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) if (nvm->type != e1000_nvm_flash_hw) return 0; - /* - * Check bit 4 of word 10h. If it is 0, firmware is done updating + /* Check bit 4 of word 10h. If it is 0, firmware is done updating * 10h-12h. Checksum may need to be fixed. */ ret_val = e1000_read_nvm(hw, 0x10, 1, &data); @@ -1819,8 +1782,7 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) return ret_val; if (!(data & 0x10)) { - /* - * Read 0x23 and check bit 15. This bit is a 1 + /* Read 0x23 and check bit 15. This bit is a 1 * when the checksum has already been fixed. If * the checksum is still wrong and this bit is a * 1, we need to return bad checksum. Otherwise, @@ -1852,8 +1814,7 @@ static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw) if (hw->mac.type == e1000_82571) { s32 ret_val = 0; - /* - * If there's an alternate MAC address place it in RAR0 + /* If there's an alternate MAC address place it in RAR0 * so that it will override the Si installed default perm * address. */ diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 76edbc1be33..02a12b69555 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -185,8 +185,7 @@ #define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ #define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ -/* - * Use byte values for the following shift parameters +/* Use byte values for the following shift parameters * Usage: * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & * E1000_PSRCTL_BSIZE0_MASK) | @@ -242,8 +241,7 @@ #define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ #define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ -/* - * Bit definitions for the Management Data IO (MDIO) and Management Data +/* Bit definitions for the Management Data IO (MDIO) and Management Data * Clock (MDC) pins in the Device Control Register. */ @@ -424,8 +422,7 @@ #define E1000_PBA_ECC_STAT_CLR 0x00000002 /* Clear ECC error counter */ #define E1000_PBA_ECC_INT_EN 0x00000004 /* Enable ICR bit 5 for ECC */ -/* - * This defines the bits that are set in the Interrupt Mask +/* This defines the bits that are set in the Interrupt Mask * Set/Read Register. Each bit is documented below: * o RXT0 = Receiver Timer Interrupt (ring 0) * o TXDW = Transmit Descriptor Written Back @@ -475,8 +472,7 @@ /* 802.1q VLAN Packet Size */ #define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ -/* Receive Address */ -/* +/* Receive Address * Number of high/low register pairs in the RAR. The RAR (Receive Address * Registers) holds the directed and multicast addresses that we monitor. * Technically, we have 16 spots. However, we reserve one of these spots @@ -723,8 +719,7 @@ #define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ #define MAX_PHY_MULTI_PAGE_REG 0xF -/* Bit definitions for valid PHY IDs. */ -/* +/* Bit definitions for valid PHY IDs. * I = Integrated * E = External */ @@ -762,8 +757,7 @@ #define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* Auto crossover enabled all speeds */ #define M88E1000_PSCR_AUTO_X_MODE 0x0060 -/* - * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold) +/* 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold) * 0=Normal 10BASE-T Rx Threshold */ #define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ @@ -779,14 +773,12 @@ #define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 -/* - * Number of times we will attempt to autonegotiate before downshifting if we +/* Number of times we will attempt to autonegotiate before downshifting if we * are the master */ #define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 -/* - * Number of times we will attempt to autonegotiate before downshifting if we +/* Number of times we will attempt to autonegotiate before downshifting if we * are the slave */ #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 @@ -808,8 +800,7 @@ #define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ ((reg) & MAX_PHY_REG_ADDRESS)) -/* - * Bits... +/* Bits... * 15-5: page * 4-0: register offset */ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 04668b47a1d..6782a2eea1b 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -161,8 +161,7 @@ struct e1000_info; /* Time to wait before putting the device into D3 if there's no link (in ms). */ #define LINK_TIMEOUT 100 -/* - * Count for polling __E1000_RESET condition every 10-20msec. +/* Count for polling __E1000_RESET condition every 10-20msec. * Experimentation has shown the reset can take approximately 210msec. */ #define E1000_CHECK_RESET_COUNT 25 @@ -172,8 +171,7 @@ struct e1000_info; #define BURST_RDTR 0x20 #define BURST_RADV 0x20 -/* - * in the case of WTHRESH, it appears at least the 82571/2 hardware +/* in the case of WTHRESH, it appears at least the 82571/2 hardware * writes back 4 descriptors when WTHRESH=5, and 3 descriptors when * WTHRESH=4, so a setting of 5 gives the most efficient bus * utilization but to avoid possible Tx stalls, set it to 1 @@ -214,8 +212,7 @@ struct e1000_ps_page { u64 dma; /* must be u64 - written to hw */ }; -/* - * wrappers around a pointer to a socket buffer, +/* wrappers around a pointer to a socket buffer, * so a DMA handle can be stored along with the buffer */ struct e1000_buffer { @@ -305,9 +302,7 @@ struct e1000_adapter { u16 tx_itr; u16 rx_itr; - /* - * Tx - */ + /* Tx */ struct e1000_ring *tx_ring /* One per active queue */ ____cacheline_aligned_in_smp; u32 tx_fifo_limit; @@ -340,9 +335,7 @@ struct e1000_adapter { u32 tx_fifo_size; u32 tx_dma_failed; - /* - * Rx - */ + /* Rx */ bool (*clean_rx) (struct e1000_ring *ring, int *work_done, int work_to_do) ____cacheline_aligned_in_smp; void (*alloc_rx_buf) (struct e1000_ring *ring, int cleaned_count, diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index c11ac275666..f95bc6ee1c2 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -214,7 +214,8 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx) mac->autoneg = 0; /* Make sure dplx is at most 1 bit and lsb of speed is not set - * for the switch() below to work */ + * for the switch() below to work + */ if ((spd & 1) || (dplx & ~1)) goto err_inval; @@ -263,8 +264,7 @@ static int e1000_set_settings(struct net_device *netdev, struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - /* - * When SoL/IDER sessions are active, autoneg/speed/duplex + /* When SoL/IDER sessions are active, autoneg/speed/duplex * cannot be changed */ if (hw->phy.ops.check_reset_block && @@ -273,8 +273,7 @@ static int e1000_set_settings(struct net_device *netdev, return -EINVAL; } - /* - * MDI setting is only allowed when autoneg enabled because + /* MDI setting is only allowed when autoneg enabled because * some hardware doesn't allow MDI setting when speed or * duplex is forced. */ @@ -316,8 +315,7 @@ static int e1000_set_settings(struct net_device *netdev, /* MDI-X => 2; MDI => 1; Auto => 3 */ if (ecmd->eth_tp_mdix_ctrl) { - /* - * fix up the value for auto (3 => 0) as zero is mapped + /* fix up the value for auto (3 => 0) as zero is mapped * internally to auto */ if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO) @@ -454,8 +452,8 @@ static void e1000_get_regs(struct net_device *netdev, regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */ /* ethtool doesn't use anything past this point, so all this - * code is likely legacy junk for apps that may or may not - * exist */ + * code is likely legacy junk for apps that may or may not exist + */ if (hw->phy.type == e1000_phy_m88) { e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); regs_buff[13] = (u32)phy_data; /* cable length */ @@ -598,8 +596,7 @@ static int e1000_set_eeprom(struct net_device *netdev, if (ret_val) goto out; - /* - * Update the checksum over the first part of the EEPROM if needed + /* Update the checksum over the first part of the EEPROM if needed * and flush shadow RAM for applicable controllers */ if ((first_word <= NVM_CHECKSUM_REG) || @@ -623,8 +620,7 @@ static void e1000_get_drvinfo(struct net_device *netdev, strlcpy(drvinfo->version, e1000e_driver_version, sizeof(drvinfo->version)); - /* - * EEPROM image version # is reported as firmware version # for + /* EEPROM image version # is reported as firmware version # for * PCI-E controllers */ snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), @@ -708,8 +704,7 @@ static int e1000_set_ringparam(struct net_device *netdev, e1000e_down(adapter); - /* - * We can't just free everything and then setup again, because the + /* We can't just free everything and then setup again, because the * ISRs in MSI-X mode get passed pointers to the Tx and Rx ring * structs. First, attempt to allocate new resources... */ @@ -813,8 +808,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) u32 mask; u32 wlock_mac = 0; - /* - * The status register is Read Only, so a write should fail. + /* The status register is Read Only, so a write should fail. * Some bits that get toggled are ignored. */ switch (mac->type) { @@ -996,8 +990,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) } if (!shared_int) { - /* - * Disable the interrupt to be reported in + /* Disable the interrupt to be reported in * the cause register and then force the same * interrupt and see if one gets posted. If * an interrupt was posted to the bus, the @@ -1015,8 +1008,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) } } - /* - * Enable the interrupt to be reported in + /* Enable the interrupt to be reported in * the cause register and then force the same * interrupt and see if one gets posted. If * an interrupt was not posted to the bus, the @@ -1034,8 +1026,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) } if (!shared_int) { - /* - * Disable the other interrupts to be reported in + /* Disable the other interrupts to be reported in * the cause register and then force the other * interrupts and see if any get posted. If * an interrupt was posted to the bus, the @@ -1378,8 +1369,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) hw->phy.type == e1000_phy_m88) { ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ } else { - /* - * Set the ILOS bit on the fiber Nic if half duplex link is + /* Set the ILOS bit on the fiber Nic if half duplex link is * detected. */ if ((er32(STATUS) & E1000_STATUS_FD) == 0) @@ -1388,8 +1378,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) ew32(CTRL, ctrl_reg); - /* - * Disable the receiver on the PHY so when a cable is plugged in, the + /* Disable the receiver on the PHY so when a cable is plugged in, the * PHY does not begin to autoneg when a cable is reconnected to the NIC. */ if (hw->phy.type == e1000_phy_m88) @@ -1408,8 +1397,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter) /* special requirements for 82571/82572 fiber adapters */ - /* - * jump through hoops to make sure link is up because serdes + /* jump through hoops to make sure link is up because serdes * link is hardwired up */ ctrl |= E1000_CTRL_SLU; @@ -1429,8 +1417,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter) ew32(CTRL, ctrl); } - /* - * special write to serdes control register to enable SerDes analog + /* special write to serdes control register to enable SerDes analog * loopback */ #define E1000_SERDES_LB_ON 0x410 @@ -1448,8 +1435,7 @@ static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter) u32 ctrlext = er32(CTRL_EXT); u32 ctrl = er32(CTRL); - /* - * save CTRL_EXT to restore later, reuse an empty variable (unused + /* save CTRL_EXT to restore later, reuse an empty variable (unused * on mac_type 80003es2lan) */ adapter->tx_fifo_head = ctrlext; @@ -1585,8 +1571,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) ew32(RDT(0), rx_ring->count - 1); - /* - * Calculate the loop count based on the largest descriptor ring + /* Calculate the loop count based on the largest descriptor ring * The idea is to wrap the largest ring a number of times using 64 * send/receive pairs during each loop */ @@ -1627,8 +1612,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) l++; if (l == rx_ring->count) l = 0; - /* - * time + 20 msecs (200 msecs on 2.4) is more than + /* time + 20 msecs (200 msecs on 2.4) is more than * enough time to complete the receives, if it's * exceeded, break and error off */ @@ -1649,10 +1633,7 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) { struct e1000_hw *hw = &adapter->hw; - /* - * PHY loopback cannot be performed if SoL/IDER - * sessions are active - */ + /* PHY loopback cannot be performed if SoL/IDER sessions are active */ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) { e_err("Cannot do PHY loopback test when SoL/IDER is active.\n"); @@ -1686,8 +1667,7 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) int i = 0; hw->mac.serdes_has_link = false; - /* - * On some blade server designs, link establishment + /* On some blade server designs, link establishment * could take as long as 2-3 minutes */ do { @@ -1701,8 +1681,7 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) } else { hw->mac.ops.check_for_link(hw); if (hw->mac.autoneg) - /* - * On some Phy/switch combinations, link establishment + /* On some Phy/switch combinations, link establishment * can take a few seconds more than expected. */ msleep(5000); diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index d37bfd96c98..cf217777586 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -85,8 +85,7 @@ enum e1e_registers { E1000_FCRTL = 0x02160, /* Flow Control Receive Threshold Low - RW */ E1000_FCRTH = 0x02168, /* Flow Control Receive Threshold High - RW */ E1000_PSRCTL = 0x02170, /* Packet Split Receive Control - RW */ -/* - * Convenience macros +/* Convenience macros * * Note: "_n" is the queue number of the register to be written to. * @@ -800,8 +799,7 @@ struct e1000_mac_operations { s32 (*read_mac_addr)(struct e1000_hw *); }; -/* - * When to use various PHY register access functions: +/* When to use various PHY register access functions: * * Func Caller * Function Does Does When to use diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index e3a7b07df62..97633654760 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -26,8 +26,7 @@ *******************************************************************************/ -/* - * 82562G 10/100 Network Connection +/* 82562G 10/100 Network Connection * 82562G-2 10/100 Network Connection * 82562GT 10/100 Network Connection * 82562GT-2 10/100 Network Connection @@ -354,8 +353,7 @@ static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) return true; } - /* - * In case the PHY needs to be in mdio slow mode, + /* In case the PHY needs to be in mdio slow mode, * set slow mode and try to get the PHY id again. */ hw->phy.ops.release(hw); @@ -386,8 +384,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) return ret_val; } - /* - * The MAC-PHY interconnect may be in SMBus mode. If the PHY is + /* The MAC-PHY interconnect may be in SMBus mode. If the PHY is * inaccessible and resetting the PHY is not blocked, toggle the * LANPHYPC Value bit to force the interconnect to PCIe mode. */ @@ -396,8 +393,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) if (e1000_phy_is_accessible_pchlan(hw)) break; - /* - * Before toggling LANPHYPC, see if PHY is accessible by + /* Before toggling LANPHYPC, see if PHY is accessible by * forcing MAC to SMBus mode first. */ mac_reg = er32(CTRL_EXT); @@ -406,8 +402,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) /* fall-through */ case e1000_pch2lan: - /* - * Gate automatic PHY configuration by hardware on + /* Gate automatic PHY configuration by hardware on * non-managed 82579 */ if ((hw->mac.type == e1000_pch2lan) && @@ -474,8 +469,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) hw->phy.ops.release(hw); - /* - * Reset the PHY before any access to it. Doing so, ensures + /* Reset the PHY before any access to it. Doing so, ensures * that the PHY is in a known good state before we read/write * PHY registers. The generic reset is sufficient here, * because we haven't determined the PHY type yet. @@ -536,8 +530,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) /* fall-through */ case e1000_pch2lan: case e1000_pch_lpt: - /* - * In case the PHY needs to be in mdio slow mode, + /* In case the PHY needs to be in mdio slow mode, * set slow mode and try to get the PHY id again. */ ret_val = e1000_set_mdio_slow_mode_hv(hw); @@ -593,8 +586,7 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) phy->ops.power_up = e1000_power_up_phy_copper; phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; - /* - * We may need to do this twice - once for IGP and if that fails, + /* We may need to do this twice - once for IGP and if that fails, * we'll set BM func pointers and try again */ ret_val = e1000e_determine_phy_address(hw); @@ -679,8 +671,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) gfpreg = er32flash(ICH_FLASH_GFPREG); - /* - * sector_X_addr is a "sector"-aligned address (4096 bytes) + /* sector_X_addr is a "sector"-aligned address (4096 bytes) * Add 1 to sector_end_addr since this sector is included in * the overall size. */ @@ -690,8 +681,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* flash_base_addr is byte-aligned */ nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT; - /* - * find total size of the NVM, then cut in half since the total + /* find total size of the NVM, then cut in half since the total * size represents two separate NVM banks. */ nvm->flash_bank_size = (sector_end_addr - sector_base_addr) @@ -788,8 +778,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) if (mac->type == e1000_ich8lan) e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true); - /* - * Gate automatic PHY configuration by hardware on managed + /* Gate automatic PHY configuration by hardware on managed * 82579 and i217 */ if ((mac->type == e1000_pch2lan || mac->type == e1000_pch_lpt) && @@ -840,8 +829,7 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) goto release; e1e_rphy_locked(hw, I82579_EMI_DATA, &dev_spec->eee_lp_ability); - /* - * EEE is not supported in 100Half, so ignore partner's EEE + /* EEE is not supported in 100Half, so ignore partner's EEE * in 100 ability if full-duplex is not advertised. */ e1e_rphy_locked(hw, PHY_LP_ABILITY, &phy_reg); @@ -869,8 +857,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) bool link; u16 phy_reg; - /* - * We only want to go out to the PHY registers to see if Auto-Neg + /* We only want to go out to the PHY registers to see if Auto-Neg * has completed and/or if our link status has changed. The * get_link_status flag is set upon receiving a Link Status * Change or Rx Sequence Error interrupt. @@ -878,8 +865,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) if (!mac->get_link_status) return 0; - /* - * First we want to see if the MII Status Register reports + /* First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex * of the PHY. */ @@ -914,8 +900,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; } - /* - * Workaround for PCHx parts in half-duplex: + /* Workaround for PCHx parts in half-duplex: * Set the number of preambles removed from the packet * when it is passed from the PHY to the MAC to prevent * the MAC from misinterpreting the packet type. @@ -932,8 +917,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) break; } - /* - * Check if there was DownShift, must be checked + /* Check if there was DownShift, must be checked * immediately after link-up */ e1000e_check_downshift(hw); @@ -943,22 +927,19 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * If we are forcing speed/duplex, then we simply return since + /* If we are forcing speed/duplex, then we simply return since * we have already determined whether we have link or not. */ if (!mac->autoneg) return -E1000_ERR_CONFIG; - /* - * Auto-Neg is enabled. Auto Speed Detection takes care + /* Auto-Neg is enabled. Auto Speed Detection takes care * of MAC speed/duplex configuration. So we only need to * configure Collision Distance in the MAC. */ mac->ops.config_collision_dist(hw); - /* - * Configure Flow Control now that Auto-Neg has completed. + /* Configure Flow Control now that Auto-Neg has completed. * First, we need to restore the desired flow control * settings because we may have had to re-autoneg with a * different link partner. @@ -1000,8 +981,7 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) if (rc) return rc; - /* - * Disable Jumbo Frame support on parts with Intel 10/100 PHY or + /* Disable Jumbo Frame support on parts with Intel 10/100 PHY or * on parts with MACsec enabled in NVM (reflected in CTRL_EXT). */ if ((adapter->hw.phy.type == e1000_phy_ife) || @@ -1191,8 +1171,7 @@ static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; - /* - * HW expects these in little endian so we reverse the byte order + /* HW expects these in little endian so we reverse the byte order * from network order (big endian) to little endian */ rar_low = ((u32)addr[0] | @@ -1256,8 +1235,7 @@ static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) u32 rar_low, rar_high; u32 wlock_mac; - /* - * HW expects these in little endian so we reverse the byte order + /* HW expects these in little endian so we reverse the byte order * from network order (big endian) to little endian */ rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) | @@ -1277,8 +1255,7 @@ static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) return; } - /* - * The manageability engine (ME) can lock certain SHRAR registers that + /* The manageability engine (ME) can lock certain SHRAR registers that * it is using - those registers are unavailable for use. */ if (index < hw->mac.rar_entry_count) { @@ -1387,8 +1364,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) s32 ret_val = 0; u16 word_addr, reg_data, reg_addr, phy_page = 0; - /* - * Initialize the PHY from the NVM on ICH platforms. This + /* Initialize the PHY from the NVM on ICH platforms. This * is needed due to an issue where the NVM configuration is * not properly autoloaded after power transitions. * Therefore, after each PHY reset, we will load the @@ -1422,8 +1398,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) if (!(data & sw_cfg_mask)) goto release; - /* - * Make sure HW does not configure LCD from PHY + /* Make sure HW does not configure LCD from PHY * extended configuration before SW configuration */ data = er32(EXTCNF_CTRL); @@ -1443,8 +1418,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) if (((hw->mac.type == e1000_pchlan) && !(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)) || (hw->mac.type > e1000_pchlan)) { - /* - * HW configures the SMBus address and LEDs when the + /* HW configures the SMBus address and LEDs when the * OEM and LCD Write Enable bits are set in the NVM. * When both NVM bits are cleared, SW will configure * them instead. @@ -1748,8 +1722,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) } if (hw->phy.type == e1000_phy_82578) { - /* - * Return registers to default by doing a soft reset then + /* Return registers to default by doing a soft reset then * writing 0x3140 to the control register. */ if (hw->phy.revision < 2) { @@ -1769,8 +1742,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * Configure the K1 Si workaround during phy reset assuming there is + /* Configure the K1 Si workaround during phy reset assuming there is * link so that it disables K1 if link is in 1Gbps. */ ret_val = e1000_k1_gig_workaround_hv(hw, true); @@ -1853,8 +1825,7 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) return ret_val; if (enable) { - /* - * Write Rx addresses (rar_entry_count for RAL/H, +4 for + /* Write Rx addresses (rar_entry_count for RAL/H, +4 for * SHRAL/H) and initial CRC values to the MAC */ for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) { @@ -2131,8 +2102,7 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw) udelay(100); } while ((!data) && --loop); - /* - * If basic configuration is incomplete before the above loop + /* If basic configuration is incomplete before the above loop * count reaches 0, loading the configuration from NVM will * leave the PHY in a bad state possibly resulting in no link. */ @@ -2299,8 +2269,7 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) if (phy->type != e1000_phy_igp_3) return 0; - /* - * Call gig speed drop workaround on LPLU before accessing + /* Call gig speed drop workaround on LPLU before accessing * any PHY registers */ if (hw->mac.type == e1000_ich8lan) @@ -2319,8 +2288,7 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) if (phy->type != e1000_phy_igp_3) return 0; - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable * SmartSpeed, so performance is maintained. @@ -2382,8 +2350,7 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active) if (phy->type != e1000_phy_igp_3) return 0; - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable * SmartSpeed, so performance is maintained. @@ -2420,8 +2387,7 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active) if (phy->type != e1000_phy_igp_3) return 0; - /* - * Call gig speed drop workaround on LPLU before accessing + /* Call gig speed drop workaround on LPLU before accessing * any PHY registers */ if (hw->mac.type == e1000_ich8lan) @@ -2589,8 +2555,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); - /* - * Either we should have a hardware SPI cycle in progress + /* Either we should have a hardware SPI cycle in progress * bit to check against, in order to start a new cycle or * FDONE bit should be changed in the hardware so that it * is 1 after hardware reset, which can then be used as an @@ -2599,8 +2564,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) */ if (!hsfsts.hsf_status.flcinprog) { - /* - * There is no cycle running at present, + /* There is no cycle running at present, * so we can start a cycle. * Begin by setting Flash Cycle Done. */ @@ -2610,8 +2574,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) } else { s32 i; - /* - * Otherwise poll for sometime so the current + /* Otherwise poll for sometime so the current * cycle has a chance to end before giving up. */ for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) { @@ -2623,8 +2586,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) udelay(1); } if (!ret_val) { - /* - * Successful in waiting for previous cycle to timeout, + /* Successful in waiting for previous cycle to timeout, * now set the Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; @@ -2753,8 +2715,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, ret_val = e1000_flash_cycle_ich8lan(hw, ICH_FLASH_READ_COMMAND_TIMEOUT); - /* - * Check if FCERR is set to 1, if set to 1, clear it + /* Check if FCERR is set to 1, if set to 1, clear it * and try the whole sequence a few more times, else * read in (shift in) the Flash Data0, the order is * least significant byte first msb to lsb @@ -2767,8 +2728,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, *data = (u16)(flash_data & 0x0000FFFF); break; } else { - /* - * If we've gotten here, then things are probably + /* If we've gotten here, then things are probably * completely hosed, but if the error condition is * detected, it won't hurt to give it another try... * ICH_FLASH_CYCLE_REPEAT_COUNT times. @@ -2849,8 +2809,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) nvm->ops.acquire(hw); - /* - * We're writing to the opposite bank so if we're on bank 1, + /* We're writing to the opposite bank so if we're on bank 1, * write to bank 0 etc. We also need to erase the segment that * is going to be written */ @@ -2875,8 +2834,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) } for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) { - /* - * Determine whether to write the value stored + /* Determine whether to write the value stored * in the other NVM bank or a modified value stored * in the shadow RAM */ @@ -2890,8 +2848,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) break; } - /* - * If the word is 0x13, then make sure the signature bits + /* If the word is 0x13, then make sure the signature bits * (15:14) are 11b until the commit has completed. * This will allow us to write 10b which indicates the * signature is valid. We want to do this after the write @@ -2920,8 +2877,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) break; } - /* - * Don't bother writing the segment valid bits if sector + /* Don't bother writing the segment valid bits if sector * programming failed. */ if (ret_val) { @@ -2930,8 +2886,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) goto release; } - /* - * Finally validate the new segment by setting bit 15:14 + /* Finally validate the new segment by setting bit 15:14 * to 10b in word 0x13 , this can be done without an * erase as well since these bits are 11 to start with * and we need to change bit 14 to 0b @@ -2948,8 +2903,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (ret_val) goto release; - /* - * And invalidate the previously valid segment by setting + /* And invalidate the previously valid segment by setting * its signature word (0x13) high_byte to 0b. This can be * done without an erase because flash erase sets all bits * to 1's. We can write 1's to 0's without an erase @@ -2968,8 +2922,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) release: nvm->ops.release(hw); - /* - * Reload the EEPROM, or else modifications will not appear + /* Reload the EEPROM, or else modifications will not appear * until after the next adapter reset. */ if (!ret_val) { @@ -2997,8 +2950,7 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) s32 ret_val; u16 data; - /* - * Read 0x19 and check bit 6. If this bit is 0, the checksum + /* Read 0x19 and check bit 6. If this bit is 0, the checksum * needs to be fixed. This bit is an indication that the NVM * was prepared by OEM software and did not calculate the * checksum...a likely scenario. @@ -3048,8 +3000,7 @@ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) pr0.range.wpe = true; ew32flash(ICH_FLASH_PR0, pr0.regval); - /* - * Lock down a subset of GbE Flash Control Registers, e.g. + /* Lock down a subset of GbE Flash Control Registers, e.g. * PR0 to prevent the write-protection from being lifted. * Once FLOCKDN is set, the registers protected by it cannot * be written until FLOCKDN is cleared by a hardware reset. @@ -3109,8 +3060,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, ew32flash(ICH_FLASH_FDATA0, flash_data); - /* - * check if FCERR is set to 1 , if set to 1, clear it + /* check if FCERR is set to 1 , if set to 1, clear it * and try the whole sequence a few more times else done */ ret_val = e1000_flash_cycle_ich8lan(hw, @@ -3118,8 +3068,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, if (!ret_val) break; - /* - * If we're here, then things are most likely + /* If we're here, then things are most likely * completely hosed, but if the error condition * is detected, it won't hurt to give it another * try...ICH_FLASH_CYCLE_REPEAT_COUNT times. @@ -3207,8 +3156,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); - /* - * Determine HW Sector size: Read BERASE bits of hw flash status + /* Determine HW Sector size: Read BERASE bits of hw flash status * register * 00: The Hw sector is 256 bytes, hence we need to erase 16 * consecutive sectors. The start index for the nth Hw sector @@ -3253,16 +3201,14 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) if (ret_val) return ret_val; - /* - * Write a value 11 (block Erase) in Flash + /* Write a value 11 (block Erase) in Flash * Cycle field in hw flash control */ hsflctl.regval = er16flash(ICH_FLASH_HSFCTL); hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE; ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval); - /* - * Write the last 24 bits of an index within the + /* Write the last 24 bits of an index within the * block into Flash Linear address field in Flash * Address. */ @@ -3274,8 +3220,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) if (!ret_val) break; - /* - * Check if FCERR is set to 1. If 1, + /* Check if FCERR is set to 1. If 1, * clear it and try the whole sequence * a few more times else Done */ @@ -3403,8 +3348,7 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw) ret_val = e1000e_get_bus_info_pcie(hw); - /* - * ICH devices are "PCI Express"-ish. They have + /* ICH devices are "PCI Express"-ish. They have * a configuration space, but do not contain * PCI Express Capability registers, so bus width * must be hardcoded. @@ -3429,8 +3373,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) u32 ctrl, reg; s32 ret_val; - /* - * Prevent the PCI-E bus from sticking if there is no TLP connection + /* Prevent the PCI-E bus from sticking if there is no TLP connection * on the last TLP read/write transaction when MAC is reset. */ ret_val = e1000e_disable_pcie_master(hw); @@ -3440,8 +3383,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) e_dbg("Masking off all interrupts\n"); ew32(IMC, 0xffffffff); - /* - * Disable the Transmit and Receive units. Then delay to allow + /* Disable the Transmit and Receive units. Then delay to allow * any pending transactions to complete before we hit the MAC * with the global reset. */ @@ -3474,15 +3416,13 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ctrl = er32(CTRL); if (!hw->phy.ops.check_reset_block(hw)) { - /* - * Full-chip reset requires MAC and PHY reset at the same + /* Full-chip reset requires MAC and PHY reset at the same * time to make sure the interface between MAC and the * external PHY is reset. */ ctrl |= E1000_CTRL_PHY_RST; - /* - * Gate automatic PHY configuration by hardware on + /* Gate automatic PHY configuration by hardware on * non-managed 82579 */ if ((hw->mac.type == e1000_pch2lan) && @@ -3516,8 +3456,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) return ret_val; } - /* - * For PCH, this write will make sure that any noise + /* For PCH, this write will make sure that any noise * will be detected as a CRC error and be dropped rather than show up * as a bad packet to the DMA engine. */ @@ -3569,8 +3508,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) for (i = 0; i < mac->mta_reg_count; i++) E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); - /* - * The 82578 Rx buffer will stall if wakeup is enabled in host and + /* The 82578 Rx buffer will stall if wakeup is enabled in host and * the ME. Disable wakeup by clearing the host wakeup bit. * Reset the phy after disabling host wakeup to reset the Rx buffer. */ @@ -3600,8 +3538,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) E1000_TXDCTL_MAX_TX_DESC_PREFETCH; ew32(TXDCTL(1), txdctl); - /* - * ICH8 has opposite polarity of no_snoop bits. + /* ICH8 has opposite polarity of no_snoop bits. * By default, we should use snoop behavior. */ if (mac->type == e1000_ich8lan) @@ -3614,8 +3551,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) ctrl_ext |= E1000_CTRL_EXT_RO_DIS; ew32(CTRL_EXT, ctrl_ext); - /* - * Clear all of the statistics registers (clear on read). It is + /* Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there * is no link. @@ -3676,15 +3612,13 @@ static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw) ew32(STATUS, reg); } - /* - * work-around descriptor data corruption issue during nfs v2 udp + /* work-around descriptor data corruption issue during nfs v2 udp * traffic, just disable the nfs filtering capability */ reg = er32(RFCTL); reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS); - /* - * Disable IPv6 extension header parsing because some malformed + /* Disable IPv6 extension header parsing because some malformed * IPv6 headers can hang the Rx. */ if (hw->mac.type == e1000_ich8lan) @@ -3709,8 +3643,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) if (hw->phy.ops.check_reset_block(hw)) return 0; - /* - * ICH parts do not have a word in the NVM to determine + /* ICH parts do not have a word in the NVM to determine * the default flow control setting, so we explicitly * set it to full. */ @@ -3722,8 +3655,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) hw->fc.requested_mode = e1000_fc_full; } - /* - * Save off the requested flow control mode for use later. Depending + /* Save off the requested flow control mode for use later. Depending * on the link partner's capabilities, we may or may not use this mode. */ hw->fc.current_mode = hw->fc.requested_mode; @@ -3771,8 +3703,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); ew32(CTRL, ctrl); - /* - * Set the mac to wait the maximum time between each iteration + /* Set the mac to wait the maximum time between each iteration * and increase the max iterations when polling the phy; * this fixes erroneous timeouts at 10Mbps. */ @@ -3892,8 +3823,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) if (!dev_spec->kmrn_lock_loss_workaround_enabled) return 0; - /* - * Make sure link is up before proceeding. If not just return. + /* Make sure link is up before proceeding. If not just return. * Attempting this while link is negotiating fouled up link * stability */ @@ -3925,8 +3855,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_NOND0A_GBE_DISABLE); ew32(PHY_CTRL, phy_ctrl); - /* - * Call gig speed drop workaround on Gig disable before accessing + /* Call gig speed drop workaround on Gig disable before accessing * any PHY registers */ e1000e_gig_downshift_workaround_ich8lan(hw); @@ -3983,8 +3912,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_NOND0A_GBE_DISABLE); ew32(PHY_CTRL, reg); - /* - * Call gig speed drop workaround on Gig disable before + /* Call gig speed drop workaround on Gig disable before * accessing any PHY registers */ if (hw->mac.type == e1000_ich8lan) @@ -4078,8 +4006,7 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) goto release; e1e_rphy_locked(hw, I82579_EMI_DATA, &eee_advert); - /* - * Disable LPLU if both link partners support 100BaseT + /* Disable LPLU if both link partners support 100BaseT * EEE and 100Full is advertised on both ends of the * link. */ @@ -4091,8 +4018,7 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_NOND0A_LPLU); } - /* - * For i217 Intel Rapid Start Technology support, + /* For i217 Intel Rapid Start Technology support, * when the system is going into Sx and no manageability engine * is present, the driver must configure proxy to reset only on * power good. LPI (Low Power Idle) state must also reset only @@ -4106,8 +4032,7 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) phy_reg |= I217_PROXY_CTRL_AUTO_DISABLE; e1e_wphy_locked(hw, I217_PROXY_CTRL, phy_reg); - /* - * Set bit enable LPI (EEE) to reset only on + /* Set bit enable LPI (EEE) to reset only on * power good. */ e1e_rphy_locked(hw, I217_SxCTRL, &phy_reg); @@ -4120,8 +4045,7 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) e1e_wphy_locked(hw, I217_MEMPWR, phy_reg); } - /* - * Enable MTA to reset for Intel Rapid Start Technology + /* Enable MTA to reset for Intel Rapid Start Technology * Support */ e1e_rphy_locked(hw, I217_CGFREG, &phy_reg); @@ -4175,8 +4099,7 @@ void e1000_resume_workarounds_pchlan(struct e1000_hw *hw) return; } - /* - * For i217 Intel Rapid Start Technology support when the system + /* For i217 Intel Rapid Start Technology support when the system * is transitioning from Sx and no manageability engine is present * configure SMBus to restore on reset, disable proxy, and enable * the reset on MTA (Multicast table array). @@ -4191,8 +4114,7 @@ void e1000_resume_workarounds_pchlan(struct e1000_hw *hw) } if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { - /* - * Restore clear on SMB if no manageability engine + /* Restore clear on SMB if no manageability engine * is present */ ret_val = e1e_rphy_locked(hw, I217_MEMPWR, &phy_reg); @@ -4298,8 +4220,7 @@ static s32 e1000_led_on_pchlan(struct e1000_hw *hw) u16 data = (u16)hw->mac.ledctl_mode2; u32 i, led; - /* - * If no link, then turn LED on by setting the invert bit + /* If no link, then turn LED on by setting the invert bit * for each LED that's mode is "link_up" in ledctl_mode2. */ if (!(er32(STATUS) & E1000_STATUS_LU)) { @@ -4329,8 +4250,7 @@ static s32 e1000_led_off_pchlan(struct e1000_hw *hw) u16 data = (u16)hw->mac.ledctl_mode1; u32 i, led; - /* - * If no link, then turn LED off by clearing the invert bit + /* If no link, then turn LED off by clearing the invert bit * for each LED that's mode is "link_up" in ledctl_mode1. */ if (!(er32(STATUS) & E1000_STATUS_LU)) { @@ -4375,8 +4295,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) } else { ret_val = e1000e_get_auto_rd_done(hw); if (ret_val) { - /* - * When auto config read does not complete, do not + /* When auto config read does not complete, do not * return with an error. This can happen in situations * where there is no eeprom and prevents getting link. */ diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index a1343992848..54d9dafaf12 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -73,8 +73,7 @@ void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw) struct e1000_bus_info *bus = &hw->bus; u32 reg; - /* - * The status register reports the correct function number + /* The status register reports the correct function number * for the device regardless of function swap state. */ reg = er32(STATUS); @@ -210,8 +209,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) return 0; } - /* - * We have a valid alternate MAC address, and we want to treat it the + /* We have a valid alternate MAC address, and we want to treat it the * same as the normal permanent MAC address stored by the HW into the * RAR. Do this by mapping this address into RAR0. */ @@ -233,8 +231,7 @@ void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; - /* - * HW expects these in little endian so we reverse the byte order + /* HW expects these in little endian so we reverse the byte order * from network order (big endian) to little endian */ rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) | @@ -246,8 +243,7 @@ void e1000e_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index) if (rar_low || rar_high) rar_high |= E1000_RAH_AV; - /* - * Some bridges will combine consecutive 32-bit writes into + /* Some bridges will combine consecutive 32-bit writes into * a single burst write, which will malfunction on some parts. * The flushes avoid this. */ @@ -273,15 +269,13 @@ static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) /* Register count multiplied by bits per register */ hash_mask = (hw->mac.mta_reg_count * 32) - 1; - /* - * For a mc_filter_type of 0, bit_shift is the number of left-shifts + /* For a mc_filter_type of 0, bit_shift is the number of left-shifts * where 0xFF would still fall within the hash mask. */ while (hash_mask >> bit_shift != 0xFF) bit_shift++; - /* - * The portion of the address that is used for the hash table + /* The portion of the address that is used for the hash table * is determined by the mc_filter_type setting. * The algorithm is such that there is a total of 8 bits of shifting. * The bit_shift for a mc_filter_type of 0 represents the number of @@ -423,8 +417,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) s32 ret_val; bool link; - /* - * We only want to go out to the PHY registers to see if Auto-Neg + /* We only want to go out to the PHY registers to see if Auto-Neg * has completed and/or if our link status has changed. The * get_link_status flag is set upon receiving a Link Status * Change or Rx Sequence Error interrupt. @@ -432,8 +425,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) if (!mac->get_link_status) return 0; - /* - * First we want to see if the MII Status Register reports + /* First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex * of the PHY. */ @@ -446,28 +438,24 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) mac->get_link_status = false; - /* - * Check if there was DownShift, must be checked + /* Check if there was DownShift, must be checked * immediately after link-up */ e1000e_check_downshift(hw); - /* - * If we are forcing speed/duplex, then we simply return since + /* If we are forcing speed/duplex, then we simply return since * we have already determined whether we have link or not. */ if (!mac->autoneg) return -E1000_ERR_CONFIG; - /* - * Auto-Neg is enabled. Auto Speed Detection takes care + /* Auto-Neg is enabled. Auto Speed Detection takes care * of MAC speed/duplex configuration. So we only need to * configure Collision Distance in the MAC. */ mac->ops.config_collision_dist(hw); - /* - * Configure Flow Control now that Auto-Neg has completed. + /* Configure Flow Control now that Auto-Neg has completed. * First, we need to restore the desired flow control * settings because we may have had to re-autoneg with a * different link partner. @@ -498,8 +486,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) status = er32(STATUS); rxcw = er32(RXCW); - /* - * If we don't have link (auto-negotiation failed or link partner + /* If we don't have link (auto-negotiation failed or link partner * cannot auto-negotiate), the cable is plugged in (we have signal), * and our link partner is not trying to auto-negotiate with us (we * are receiving idles or data), we need to force link up. We also @@ -530,8 +517,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) return ret_val; } } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { - /* - * If we are forcing link and we are receiving /C/ ordered + /* If we are forcing link and we are receiving /C/ ordered * sets, re-enable auto-negotiation in the TXCW register * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. @@ -565,8 +551,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) status = er32(STATUS); rxcw = er32(RXCW); - /* - * If we don't have link (auto-negotiation failed or link partner + /* If we don't have link (auto-negotiation failed or link partner * cannot auto-negotiate), and our link partner is not trying to * auto-negotiate with us (we are receiving idles or data), * we need to force link up. We also need to give auto-negotiation @@ -595,8 +580,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) return ret_val; } } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { - /* - * If we are forcing link and we are receiving /C/ ordered + /* If we are forcing link and we are receiving /C/ ordered * sets, re-enable auto-negotiation in the TXCW register * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. @@ -607,8 +591,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) mac->serdes_has_link = true; } else if (!(E1000_TXCW_ANE & er32(TXCW))) { - /* - * If we force link for non-auto-negotiation switch, check + /* If we force link for non-auto-negotiation switch, check * link status based on MAC synchronization for internal * serdes media type. */ @@ -665,8 +648,7 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) s32 ret_val; u16 nvm_data; - /* - * Read and store word 0x0F of the EEPROM. This word contains bits + /* Read and store word 0x0F of the EEPROM. This word contains bits * that determine the hardware's default PAUSE (flow control) mode, * a bit that determines whether the HW defaults to enabling or * disabling auto-negotiation, and the direction of the @@ -705,15 +687,13 @@ s32 e1000e_setup_link_generic(struct e1000_hw *hw) { s32 ret_val; - /* - * In the case of the phy reset being blocked, we already have a link. + /* In the case of the phy reset being blocked, we already have a link. * We do not need to set it up again. */ if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) return 0; - /* - * If requested flow control is set to default, set flow control + /* If requested flow control is set to default, set flow control * based on the EEPROM flow control settings. */ if (hw->fc.requested_mode == e1000_fc_default) { @@ -722,8 +702,7 @@ s32 e1000e_setup_link_generic(struct e1000_hw *hw) return ret_val; } - /* - * Save off the requested flow control mode for use later. Depending + /* Save off the requested flow control mode for use later. Depending * on the link partner's capabilities, we may or may not use this mode. */ hw->fc.current_mode = hw->fc.requested_mode; @@ -735,8 +714,7 @@ s32 e1000e_setup_link_generic(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * Initialize the flow control address, type, and PAUSE timer + /* Initialize the flow control address, type, and PAUSE timer * registers to their default values. This is done even if flow * control is disabled, because it does not hurt anything to * initialize these registers. @@ -763,8 +741,7 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) struct e1000_mac_info *mac = &hw->mac; u32 txcw; - /* - * Check for a software override of the flow control settings, and + /* Check for a software override of the flow control settings, and * setup the device accordingly. If auto-negotiation is enabled, then * software will have to set the "PAUSE" bits to the correct value in * the Transmit Config Word Register (TXCW) and re-start auto- @@ -786,8 +763,7 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); break; case e1000_fc_rx_pause: - /* - * Rx Flow control is enabled and Tx Flow control is disabled + /* Rx Flow control is enabled and Tx Flow control is disabled * by a software over-ride. Since there really isn't a way to * advertise that we are capable of Rx Pause ONLY, we will * advertise that we support both symmetric and asymmetric Rx @@ -797,15 +773,13 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; case e1000_fc_tx_pause: - /* - * Tx Flow control is enabled, and Rx Flow control is disabled, + /* Tx Flow control is enabled, and Rx Flow control is disabled, * by a software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); break; case e1000_fc_full: - /* - * Flow control (both Rx and Tx) is enabled by a software + /* Flow control (both Rx and Tx) is enabled by a software * over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); @@ -835,8 +809,7 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) u32 i, status; s32 ret_val; - /* - * If we have a signal (the cable is plugged in, or assumed true for + /* If we have a signal (the cable is plugged in, or assumed true for * serdes media) then poll for a "Link-Up" indication in the Device * Status Register. Time-out if a link isn't seen in 500 milliseconds * seconds (Auto-negotiation should complete in less than 500 @@ -851,8 +824,7 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) if (i == FIBER_LINK_UP_LIMIT) { e_dbg("Never got a valid link from auto-neg!!!\n"); mac->autoneg_failed = true; - /* - * AutoNeg failed to achieve a link, so we'll call + /* AutoNeg failed to achieve a link, so we'll call * mac->check_for_link. This routine will force the * link up if we detect a signal. This will allow us to * communicate with non-autonegotiating link partners. @@ -894,8 +866,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * Since auto-negotiation is enabled, take the link out of reset (the + /* Since auto-negotiation is enabled, take the link out of reset (the * link will be in reset, because we previously reset the chip). This * will restart auto-negotiation. If auto-negotiation is successful * then the link-up status bit will be set and the flow control enable @@ -907,8 +878,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw) e1e_flush(); usleep_range(1000, 2000); - /* - * For these adapters, the SW definable pin 1 is set when the optics + /* For these adapters, the SW definable pin 1 is set when the optics * detect a signal. If we have a signal, then poll for a "Link-Up" * indication. */ @@ -954,16 +924,14 @@ s32 e1000e_set_fc_watermarks(struct e1000_hw *hw) { u32 fcrtl = 0, fcrth = 0; - /* - * Set the flow control receive threshold registers. Normally, + /* Set the flow control receive threshold registers. Normally, * these registers will be set to a default threshold that may be * adjusted later by the driver's runtime code. However, if the * ability to transmit pause frames is not enabled, then these * registers will be set to 0. */ if (hw->fc.current_mode & e1000_fc_tx_pause) { - /* - * We need to set up the Receive Threshold high and low water + /* We need to set up the Receive Threshold high and low water * marks as well as (optionally) enabling the transmission of * XON frames. */ @@ -995,8 +963,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw) ctrl = er32(CTRL); - /* - * Because we didn't get link via the internal auto-negotiation + /* Because we didn't get link via the internal auto-negotiation * mechanism (we either forced link or we got link via PHY * auto-neg), we have to manually enable/disable transmit an * receive flow control. @@ -1057,8 +1024,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; u16 speed, duplex; - /* - * Check for the case where we have fiber media and auto-neg failed + /* Check for the case where we have fiber media and auto-neg failed * so we had to force link. In this case, we need to force the * configuration of the MAC to match the "fc" parameter. */ @@ -1076,15 +1042,13 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) return ret_val; } - /* - * Check for the case where we have copper media and auto-neg is + /* Check for the case where we have copper media and auto-neg is * enabled. In this case, we need to check and see if Auto-Neg * has completed, and if so, how the PHY and link partner has * flow control configured. */ if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) { - /* - * Read the MII Status Register and check to see if AutoNeg + /* Read the MII Status Register and check to see if AutoNeg * has completed. We read this twice because this reg has * some "sticky" (latched) bits. */ @@ -1100,8 +1064,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) return ret_val; } - /* - * The AutoNeg process has completed, so we now need to + /* The AutoNeg process has completed, so we now need to * read both the Auto Negotiation Advertisement * Register (Address 4) and the Auto_Negotiation Base * Page Ability Register (Address 5) to determine how @@ -1115,8 +1078,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * Two bits in the Auto Negotiation Advertisement Register + /* Two bits in the Auto Negotiation Advertisement Register * (Address 4) and two bits in the Auto Negotiation Base * Page Ability Register (Address 5) determine flow control * for both the PHY and the link partner. The following @@ -1151,8 +1113,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) */ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { - /* - * Now we need to check if the user selected Rx ONLY + /* Now we need to check if the user selected Rx ONLY * of pause frames. In this case, we had to advertise * FULL flow control because we could not advertise Rx * ONLY. Hence, we must now check to see if we need to @@ -1166,8 +1127,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) e_dbg("Flow Control = Rx PAUSE frames only.\n"); } } - /* - * For receiving PAUSE frames ONLY. + /* For receiving PAUSE frames ONLY. * * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result @@ -1181,8 +1141,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) hw->fc.current_mode = e1000_fc_tx_pause; e_dbg("Flow Control = Tx PAUSE frames only.\n"); } - /* - * For transmitting PAUSE frames ONLY. + /* For transmitting PAUSE frames ONLY. * * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result @@ -1196,16 +1155,14 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) hw->fc.current_mode = e1000_fc_rx_pause; e_dbg("Flow Control = Rx PAUSE frames only.\n"); } else { - /* - * Per the IEEE spec, at this point flow control + /* Per the IEEE spec, at this point flow control * should be disabled. */ hw->fc.current_mode = e1000_fc_none; e_dbg("Flow Control = NONE.\n"); } - /* - * Now we need to do one last check... If we auto- + /* Now we need to do one last check... If we auto- * negotiated to HALF DUPLEX, flow control should not be * enabled per IEEE 802.3 spec. */ @@ -1218,8 +1175,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) if (duplex == HALF_DUPLEX) hw->fc.current_mode = e1000_fc_none; - /* - * Now we call a subroutine to actually force the MAC + /* Now we call a subroutine to actually force the MAC * controller to use the correct flow control settings. */ ret_val = e1000e_force_mac_fc(hw); @@ -1520,8 +1476,7 @@ s32 e1000e_blink_led_generic(struct e1000_hw *hw) ledctl_blink = E1000_LEDCTL_LED0_BLINK | (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); } else { - /* - * set the blink bit for each LED that's "on" (0x0E) + /* set the blink bit for each LED that's "on" (0x0E) * in ledctl_mode2 */ ledctl_blink = hw->mac.ledctl_mode2; diff --git a/drivers/net/ethernet/intel/e1000e/manage.c b/drivers/net/ethernet/intel/e1000e/manage.c index bacc950fc68..6dc47beb3ad 100644 --- a/drivers/net/ethernet/intel/e1000e/manage.c +++ b/drivers/net/ethernet/intel/e1000e/manage.c @@ -143,8 +143,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) return hw->mac.tx_pkt_filtering; } - /* - * If we can't read from the host interface for whatever + /* If we can't read from the host interface for whatever * reason, disable filtering. */ ret_val = e1000_mng_enable_host_if(hw); @@ -163,8 +162,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) hdr->checksum = 0; csum = e1000_calculate_checksum((u8 *)hdr, E1000_MNG_DHCP_COOKIE_LENGTH); - /* - * If either the checksums or signature don't match, then + /* If either the checksums or signature don't match, then * the cookie area isn't considered valid, in which case we * take the safe route of assuming Tx filtering is enabled. */ @@ -252,8 +250,7 @@ static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, /* Calculate length in DWORDs */ length >>= 2; - /* - * The device driver writes the relevant command block into the + /* The device driver writes the relevant command block into the * ram area. */ for (i = 0; i < length; i++) { diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index dadb13be479..6d06ed4e34b 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -146,9 +146,11 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = { {0, NULL} }; -/* +/** * e1000_regdump - register printout routine - */ + * @hw: pointer to the HW structure + * @reginfo: pointer to the register info table + **/ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo) { int n = 0; @@ -196,9 +198,10 @@ static void e1000e_dump_ps_pages(struct e1000_adapter *adapter, } } -/* +/** * e1000e_dump - Print registers, Tx-ring and Rx-ring - */ + * @adapter: board private structure + **/ static void e1000e_dump(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; @@ -623,8 +626,7 @@ map_skb: rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) { - /* - * Force memory writes to complete before letting h/w + /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, * such as IA-64). @@ -692,8 +694,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_ring *rx_ring, goto no_buffers; } } - /* - * Refresh the desc even if buffer_addrs + /* Refresh the desc even if buffer_addrs * didn't change because each write-back * erases this info. */ @@ -726,8 +727,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_ring *rx_ring, rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma); if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) { - /* - * Force memory writes to complete before letting h/w + /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, * such as IA-64). @@ -817,7 +817,8 @@ check_page: /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, - * such as IA-64). */ + * such as IA-64). + */ wmb(); if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) e1000e_update_rdt_wa(rx_ring, i); @@ -891,8 +892,7 @@ static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done, length = le16_to_cpu(rx_desc->wb.upper.length); - /* - * !EOP means multiple descriptors were used to store a single + /* !EOP means multiple descriptors were used to store a single * packet, if that's the case we need to toss it. In fact, we * need to toss every packet with the EOP bit clear and the * next frame that _does_ have the EOP bit set, as it is by @@ -933,8 +933,7 @@ static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done, total_rx_bytes += length; total_rx_packets++; - /* - * code added for copybreak, this should improve + /* code added for copybreak, this should improve * performance for small packets with large amounts * of reassembly being done in the stack */ @@ -1032,15 +1031,13 @@ static void e1000_print_hw_hang(struct work_struct *work) if (!adapter->tx_hang_recheck && (adapter->flags2 & FLAG2_DMA_BURST)) { - /* - * May be block on write-back, flush and detect again + /* May be block on write-back, flush and detect again * flush pending descriptor writebacks to memory */ ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); /* execute the writes immediately */ e1e_flush(); - /* - * Due to rare timing issues, write to TIDV again to ensure + /* Due to rare timing issues, write to TIDV again to ensure * the write is successful */ ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); @@ -1169,8 +1166,7 @@ static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring) } if (adapter->detect_tx_hung) { - /* - * Detect a transmit hang in hardware, this serializes the + /* Detect a transmit hang in hardware, this serializes the * check with the clearing of time_stamp and movement of i */ adapter->detect_tx_hung = false; @@ -1270,14 +1266,12 @@ static bool e1000_clean_rx_irq_ps(struct e1000_ring *rx_ring, int *work_done, skb_put(skb, length); { - /* - * this looks ugly, but it seems compiler issues make + /* this looks ugly, but it seems compiler issues make * it more efficient than reusing j */ int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]); - /* - * page alloc/put takes too long and effects small + /* page alloc/put takes too long and effects small * packet throughput, so unsplit small packets and * save the alloc/put only valid in softirq (napi) * context to call kmap_* @@ -1288,8 +1282,7 @@ static bool e1000_clean_rx_irq_ps(struct e1000_ring *rx_ring, int *work_done, ps_page = &buffer_info->ps_pages[0]; - /* - * there is no documentation about how to call + /* there is no documentation about how to call * kmap_atomic, so we can't hold the mapping * very long */ @@ -1486,14 +1479,16 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done, skb_shinfo(rxtop)->nr_frags, buffer_info->page, 0, length); /* re-use the current skb, we only consumed the - * page */ + * page + */ buffer_info->skb = skb; skb = rxtop; rxtop = NULL; e1000_consume_page(buffer_info, skb, length); } else { /* no chain, got EOP, this buf is the packet - * copybreak to save the put_page/alloc_page */ + * copybreak to save the put_page/alloc_page + */ if (length <= copybreak && skb_tailroom(skb) >= length) { u8 *vaddr; @@ -1502,7 +1497,8 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done, length); kunmap_atomic(vaddr); /* re-use the page, so don't erase - * buffer_info->page */ + * buffer_info->page + */ skb_put(skb, length); } else { skb_fill_page_desc(skb, 0, @@ -1656,22 +1652,17 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 icr = er32(ICR); - /* - * read ICR disables interrupts using IAM - */ - + /* read ICR disables interrupts using IAM */ if (icr & E1000_ICR_LSC) { hw->mac.get_link_status = true; - /* - * ICH8 workaround-- Call gig speed drop workaround on cable + /* ICH8 workaround-- Call gig speed drop workaround on cable * disconnect (LSC) before accessing any PHY registers */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) schedule_work(&adapter->downshift_task); - /* - * 80003ES2LAN workaround-- For packet buffer work-around on + /* 80003ES2LAN workaround-- For packet buffer work-around on * link down event; disable receives here in the ISR and reset * adapter in watchdog */ @@ -1713,31 +1704,27 @@ static irqreturn_t e1000_intr(int irq, void *data) if (!icr || test_bit(__E1000_DOWN, &adapter->state)) return IRQ_NONE; /* Not our interrupt */ - /* - * IMS will not auto-mask if INT_ASSERTED is not set, and if it is + /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is * not set, then the adapter didn't send an interrupt */ if (!(icr & E1000_ICR_INT_ASSERTED)) return IRQ_NONE; - /* - * Interrupt Auto-Mask...upon reading ICR, + /* Interrupt Auto-Mask...upon reading ICR, * interrupts are masked. No need for the * IMC write */ if (icr & E1000_ICR_LSC) { hw->mac.get_link_status = true; - /* - * ICH8 workaround-- Call gig speed drop workaround on cable + /* ICH8 workaround-- Call gig speed drop workaround on cable * disconnect (LSC) before accessing any PHY registers */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) schedule_work(&adapter->downshift_task); - /* - * 80003ES2LAN workaround-- + /* 80003ES2LAN workaround-- * For packet buffer work-around on link down event; * disable receives here in the ISR and * reset adapter in watchdog @@ -2469,8 +2456,7 @@ static void e1000_set_itr(struct e1000_adapter *adapter) set_itr_now: if (new_itr != adapter->itr) { - /* - * this attempts to bias the interrupt rate towards Bulk + /* this attempts to bias the interrupt rate towards Bulk * by adding intermediate steps when interrupt rate is * increasing */ @@ -2740,8 +2726,7 @@ static void e1000_init_manageability_pt(struct e1000_adapter *adapter) manc = er32(MANC); - /* - * enable receiving management packets to the host. this will probably + /* enable receiving management packets to the host. this will probably * generate destination unreachable messages from the host OS, but * the packets will be handled on SMBUS */ @@ -2754,8 +2739,7 @@ static void e1000_init_manageability_pt(struct e1000_adapter *adapter) break; case e1000_82574: case e1000_82583: - /* - * Check if IPMI pass-through decision filter already exists; + /* Check if IPMI pass-through decision filter already exists; * if so, enable it. */ for (i = 0, j = 0; i < 8; i++) { @@ -2827,8 +2811,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) u32 txdctl = er32(TXDCTL(0)); txdctl &= ~(E1000_TXDCTL_PTHRESH | E1000_TXDCTL_HTHRESH | E1000_TXDCTL_WTHRESH); - /* - * set up some performance related parameters to encourage the + /* set up some performance related parameters to encourage the * hardware to use the bus more efficiently in bursts, depends * on the tx_int_delay to be enabled, * wthresh = 1 ==> burst write is disabled to avoid Tx stalls @@ -2845,8 +2828,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) { tarc = er32(TARC(0)); - /* - * set the speed mode bit, we'll clear it if we're not at + /* set the speed mode bit, we'll clear it if we're not at * gigabit link later */ #define SPEED_MODE_BIT (1 << 21) @@ -2967,8 +2949,7 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) rfctl |= E1000_RFCTL_EXTEN; ew32(RFCTL, rfctl); - /* - * 82571 and greater support packet-split where the protocol + /* 82571 and greater support packet-split where the protocol * header is placed in skb->data and the packet data is * placed in pages hanging off of skb_shinfo(skb)->nr_frags. * In the case of a non-split, skb->data is linearly filled, @@ -3016,7 +2997,8 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) /* This is useful for sniffing bad packets. */ if (adapter->netdev->features & NETIF_F_RXALL) { /* UPE and MPE will be handled by normal PROMISC logic - * in e1000e_set_rx_mode */ + * in e1000e_set_rx_mode + */ rctl |= (E1000_RCTL_SBP | /* Receive bad packets */ E1000_RCTL_BAM | /* RX All Bcast Pkts */ E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */ @@ -3071,8 +3053,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) usleep_range(10000, 20000); if (adapter->flags2 & FLAG2_DMA_BURST) { - /* - * set the writeback threshold (only takes effect if the RDTR + /* set the writeback threshold (only takes effect if the RDTR * is set). set GRAN=1 and write back up to 0x4 worth, and * enable prefetching of 0x20 Rx descriptors * granularity = 01 @@ -3083,8 +3064,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) ew32(RXDCTL(0), E1000_RXDCTL_DMA_BURST_ENABLE); ew32(RXDCTL(1), E1000_RXDCTL_DMA_BURST_ENABLE); - /* - * override the delay timers for enabling bursting, only if + /* override the delay timers for enabling bursting, only if * the value was not set by the user via module options */ if (adapter->rx_int_delay == DEFAULT_RDTR) @@ -3108,8 +3088,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) ew32(CTRL_EXT, ctrl_ext); e1e_flush(); - /* - * Setup the HW Rx Head and Tail Descriptor Pointers and + /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ rdba = rx_ring->dma; @@ -3130,8 +3109,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) ew32(RXCSUM, rxcsum); if (adapter->hw.mac.type == e1000_pch2lan) { - /* - * With jumbo frames, excessive C-state transition + /* With jumbo frames, excessive C-state transition * latencies result in dropped transactions. */ if (adapter->netdev->mtu > ETH_DATA_LEN) { @@ -3216,8 +3194,7 @@ static int e1000e_write_uc_addr_list(struct net_device *netdev) if (!netdev_uc_empty(netdev) && rar_entries) { struct netdev_hw_addr *ha; - /* - * write the addresses in reverse order to avoid write + /* write the addresses in reverse order to avoid write * combining */ netdev_for_each_uc_addr(ha, netdev) { @@ -3269,8 +3246,7 @@ static void e1000e_set_rx_mode(struct net_device *netdev) if (netdev->flags & IFF_ALLMULTI) { rctl |= E1000_RCTL_MPE; } else { - /* - * Write addresses to the MTA, if the attempt fails + /* Write addresses to the MTA, if the attempt fails * then we should just turn on promiscuous mode so * that we can at least receive multicast traffic */ @@ -3279,8 +3255,7 @@ static void e1000e_set_rx_mode(struct net_device *netdev) rctl |= E1000_RCTL_MPE; } e1000e_vlan_filter_enable(adapter); - /* - * Write addresses to available RAR registers, if there is not + /* Write addresses to available RAR registers, if there is not * sufficient space to store all the addresses then enable * unicast promiscuous mode */ @@ -3315,8 +3290,7 @@ static void e1000e_setup_rss_hash(struct e1000_adapter *adapter) for (i = 0; i < 32; i++) ew32(RETA(i), 0); - /* - * Disable raw packet checksumming so that RSS hash is placed in + /* Disable raw packet checksumming so that RSS hash is placed in * descriptor on writeback. */ rxcsum = er32(RXCSUM); @@ -3408,8 +3382,7 @@ void e1000e_reset(struct e1000_adapter *adapter) ew32(PBA, pba); if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) { - /* - * To maintain wire speed transmits, the Tx FIFO should be + /* To maintain wire speed transmits, the Tx FIFO should be * large enough to accommodate two full transmit packets, * rounded up to the next 1KB and expressed in KB. Likewise, * the Rx FIFO should be large enough to accommodate at least @@ -3421,8 +3394,7 @@ void e1000e_reset(struct e1000_adapter *adapter) tx_space = pba >> 16; /* lower 16 bits has Rx packet buffer allocation size in KB */ pba &= 0xffff; - /* - * the Tx fifo also stores 16 bytes of information about the Tx + /* the Tx fifo also stores 16 bytes of information about the Tx * but don't include ethernet FCS because hardware appends it */ min_tx_space = (adapter->max_frame_size + @@ -3435,8 +3407,7 @@ void e1000e_reset(struct e1000_adapter *adapter) min_rx_space = ALIGN(min_rx_space, 1024); min_rx_space >>= 10; - /* - * If current Tx allocation is less than the min Tx FIFO size, + /* If current Tx allocation is less than the min Tx FIFO size, * and the min Tx FIFO size is less than the current Rx FIFO * allocation, take space away from current Rx allocation */ @@ -3444,8 +3415,7 @@ void e1000e_reset(struct e1000_adapter *adapter) ((min_tx_space - tx_space) < pba)) { pba -= min_tx_space - tx_space; - /* - * if short on Rx space, Rx wins and must trump Tx + /* if short on Rx space, Rx wins and must trump Tx * adjustment */ if (pba < min_rx_space) @@ -3455,8 +3425,7 @@ void e1000e_reset(struct e1000_adapter *adapter) ew32(PBA, pba); } - /* - * flow control settings + /* flow control settings * * The high water mark must be low enough to fit one full frame * (or the size used for early receive) above it in the Rx FIFO. @@ -3490,8 +3459,7 @@ void e1000e_reset(struct e1000_adapter *adapter) fc->low_water = fc->high_water - 8; break; case e1000_pchlan: - /* - * Workaround PCH LOM adapter hangs with certain network + /* Workaround PCH LOM adapter hangs with certain network * loads. If hangs persist, try disabling Tx flow control. */ if (adapter->netdev->mtu > ETH_DATA_LEN) { @@ -3516,8 +3484,7 @@ void e1000e_reset(struct e1000_adapter *adapter) break; } - /* - * Alignment of Tx data is on an arbitrary byte boundary with the + /* Alignment of Tx data is on an arbitrary byte boundary with the * maximum size per Tx descriptor limited only to the transmit * allocation of the packet buffer minus 96 bytes with an upper * limit of 24KB due to receive synchronization limitations. @@ -3525,8 +3492,7 @@ void e1000e_reset(struct e1000_adapter *adapter) adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96, 24 << 10); - /* - * Disable Adaptive Interrupt Moderation if 2 full packets cannot + /* Disable Adaptive Interrupt Moderation if 2 full packets cannot * fit in receive buffer. */ if (adapter->itr_setting & 0x3) { @@ -3549,8 +3515,7 @@ void e1000e_reset(struct e1000_adapter *adapter) /* Allow time for pending master requests to run */ mac->ops.reset_hw(hw); - /* - * For parts with AMT enabled, let the firmware know + /* For parts with AMT enabled, let the firmware know * that the network interface is in control */ if (adapter->flags & FLAG_HAS_AMT) @@ -3579,8 +3544,7 @@ void e1000e_reset(struct e1000_adapter *adapter) if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && !(adapter->flags & FLAG_SMART_POWER_DOWN)) { u16 phy_data = 0; - /* - * speed up time to link by disabling smart power down, ignore + /* speed up time to link by disabling smart power down, ignore * the return value of this function because there is nothing * different we would do if it failed */ @@ -3628,8 +3592,7 @@ static void e1000e_flush_descriptors(struct e1000_adapter *adapter) /* execute the writes immediately */ e1e_flush(); - /* - * due to rare timing issues, write to TIDV/RDTR again to ensure the + /* due to rare timing issues, write to TIDV/RDTR again to ensure the * write is successful */ ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); @@ -3647,8 +3610,7 @@ void e1000e_down(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; u32 tctl, rctl; - /* - * signal that we're down so the interrupt handler does not + /* signal that we're down so the interrupt handler does not * reschedule our watchdog timer */ set_bit(__E1000_DOWN, &adapter->state); @@ -3691,8 +3653,7 @@ void e1000e_down(struct e1000_adapter *adapter) if (!pci_channel_offline(adapter->pdev)) e1000e_reset(adapter); - /* - * TODO: for power management, we could drop the link and + /* TODO: for power management, we could drop the link and * pci_disable_device here. */ } @@ -3755,8 +3716,7 @@ static irqreturn_t e1000_intr_msi_test(int irq, void *data) e_dbg("icr is %08X\n", icr); if (icr & E1000_ICR_RXSEQ) { adapter->flags &= ~FLAG_MSI_TEST_FAILED; - /* - * Force memory writes to complete before acknowledging the + /* Force memory writes to complete before acknowledging the * interrupt is handled. */ wmb(); @@ -3786,7 +3746,8 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) e1000e_reset_interrupt_capability(adapter); /* Assume that the test fails, if it succeeds then the test - * MSI irq handler will unset this flag */ + * MSI irq handler will unset this flag + */ adapter->flags |= FLAG_MSI_TEST_FAILED; err = pci_enable_msi(adapter->pdev); @@ -3800,8 +3761,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) goto msi_test_failed; } - /* - * Force memory writes to complete before enabling and firing an + /* Force memory writes to complete before enabling and firing an * interrupt. */ wmb(); @@ -3901,8 +3861,7 @@ static int e1000_open(struct net_device *netdev) if (err) goto err_setup_rx; - /* - * If AMT is enabled, let the firmware know that the network + /* If AMT is enabled, let the firmware know that the network * interface is now open and reset the part to a known state. */ if (adapter->flags & FLAG_HAS_AMT) { @@ -3923,8 +3882,7 @@ static int e1000_open(struct net_device *netdev) PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE); - /* - * before we allocate an interrupt, we must be ready to handle it. + /* before we allocate an interrupt, we must be ready to handle it. * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt * as soon as we call pci_request_irq, so we have to setup our * clean_rx handler before we do so. @@ -3935,8 +3893,7 @@ static int e1000_open(struct net_device *netdev) if (err) goto err_req_irq; - /* - * Work around PCIe errata with MSI interrupts causing some chipsets to + /* Work around PCIe errata with MSI interrupts causing some chipsets to * ignore e1000e MSI messages, which means we need to test our MSI * interrupt now */ @@ -4017,16 +3974,14 @@ static int e1000_close(struct net_device *netdev) e1000e_free_tx_resources(adapter->tx_ring); e1000e_free_rx_resources(adapter->rx_ring); - /* - * kill manageability vlan ID if supported, but not if a vlan with + /* kill manageability vlan ID if supported, but not if a vlan with * the same ID is registered on the host OS (let 8021q kill it) */ if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); - /* - * If AMT is enabled, let the firmware know that the network + /* If AMT is enabled, let the firmware know that the network * interface is now closed */ if ((adapter->flags & FLAG_HAS_AMT) && @@ -4065,8 +4020,7 @@ static int e1000_set_mac(struct net_device *netdev, void *p) /* activate the work around */ e1000e_set_laa_state_82571(&adapter->hw, 1); - /* - * Hold a copy of the LAA in RAR[14] This is done so that + /* Hold a copy of the LAA in RAR[14] This is done so that * between the time RAR[0] gets clobbered and the time it * gets fixed (in e1000_watchdog), the actual LAA is in one * of the RARs and no incoming packets directed to this port @@ -4099,10 +4053,13 @@ static void e1000e_update_phy_task(struct work_struct *work) e1000_get_phy_info(&adapter->hw); } -/* +/** + * e1000_update_phy_info - timre call-back to update PHY info + * @data: pointer to adapter cast into an unsigned long + * * Need to wait a few seconds after link up to get diagnostic information from * the phy - */ + **/ static void e1000_update_phy_info(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *) data; @@ -4129,8 +4086,7 @@ static void e1000e_update_phy_stats(struct e1000_adapter *adapter) if (ret_val) return; - /* - * A page set is expensive so check if already on desired page. + /* A page set is expensive so check if already on desired page. * If not, set to the page with the PHY status registers. */ hw->phy.addr = 1; @@ -4201,8 +4157,7 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; - /* - * Prevent stats update while adapter is being reset, or if the pci + /* Prevent stats update while adapter is being reset, or if the pci * connection is down. */ if (adapter->link_speed == 0) @@ -4270,8 +4225,7 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) /* Rx Errors */ - /* - * RLEC on some newer hardware can be incorrect so build + /* RLEC on some newer hardware can be incorrect so build * our own version based on RUC and ROC */ netdev->stats.rx_errors = adapter->stats.rxerrc + @@ -4323,8 +4277,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) if (ret_val) e_warn("Error reading PHY register\n"); } else { - /* - * Do not read PHY registers if link is not up + /* Do not read PHY registers if link is not up * Set values to typical power-on defaults */ phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX); @@ -4362,8 +4315,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter) bool link_active = false; s32 ret_val = 0; - /* - * get_link_status is set on LSC (link status) interrupt or + /* get_link_status is set on LSC (link status) interrupt or * Rx sequence error interrupt. get_link_status will stay * false until the check_for_link establishes link * for copper adapters ONLY @@ -4415,8 +4367,7 @@ static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - /* - * With 82574 controllers, PHY needs to be checked periodically + /* With 82574 controllers, PHY needs to be checked periodically * for hung state and reset, if two calls return true */ if (e1000_check_phy_82574(hw)) @@ -4484,8 +4435,7 @@ static void e1000_watchdog_task(struct work_struct *work) &adapter->link_speed, &adapter->link_duplex); e1000_print_link_info(adapter); - /* - * On supported PHYs, check for duplex mismatch only + /* On supported PHYs, check for duplex mismatch only * if link has autonegotiated at 10/100 half */ if ((hw->phy.type == e1000_phy_igp_3 || @@ -4515,8 +4465,7 @@ static void e1000_watchdog_task(struct work_struct *work) break; } - /* - * workaround: re-program speed mode bit after + /* workaround: re-program speed mode bit after * link-up event */ if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) && @@ -4527,8 +4476,7 @@ static void e1000_watchdog_task(struct work_struct *work) ew32(TARC(0), tarc0); } - /* - * disable TSO for pcie and 10/100 speeds, to avoid + /* disable TSO for pcie and 10/100 speeds, to avoid * some hardware issues */ if (!(adapter->flags & FLAG_TSO_FORCE)) { @@ -4549,16 +4497,14 @@ static void e1000_watchdog_task(struct work_struct *work) } } - /* - * enable transmits in the hardware, need to do this + /* enable transmits in the hardware, need to do this * after setting TARC(0) */ tctl = er32(TCTL); tctl |= E1000_TCTL_EN; ew32(TCTL, tctl); - /* - * Perform any post-link-up configuration before + /* Perform any post-link-up configuration before * reporting link up. */ if (phy->ops.cfg_on_link_up) @@ -4609,8 +4555,7 @@ link_up: if (!netif_carrier_ok(netdev) && (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) { - /* - * We've lost link, so the controller stops DMA, + /* We've lost link, so the controller stops DMA, * but we've got queued Tx work that's never going * to get done, so reset controller to flush Tx. * (Do the reset outside of interrupt context). @@ -4622,8 +4567,7 @@ link_up: /* Simple mode for Interrupt Throttle Rate (ITR) */ if (adapter->itr_setting == 4) { - /* - * Symmetric Tx/Rx gets a reduced ITR=2000; + /* Symmetric Tx/Rx gets a reduced ITR=2000; * Total asymmetrical Tx or Rx gets ITR=8000; * everyone else is between 2000-8000. */ @@ -4648,8 +4592,7 @@ link_up: /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = true; - /* - * With 82571 controllers, LAA may be overwritten due to controller + /* With 82571 controllers, LAA may be overwritten due to controller * reset from the other port. Set the appropriate LAA in RAR[0] */ if (e1000e_get_laa_state_82571(hw)) @@ -4948,8 +4891,7 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count) if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS)) tx_desc->lower.data &= ~(cpu_to_le32(E1000_TXD_CMD_IFCS)); - /* - * Force memory writes to complete before letting h/w + /* Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, * such as IA-64). @@ -4963,8 +4905,7 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count) else writel(i, tx_ring->tail); - /* - * we need this if more than one processor can write to our tail + /* we need this if more than one processor can write to our tail * at a time, it synchronizes IO on IA64/Altix systems */ mmiowb(); @@ -5014,15 +4955,13 @@ static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size) struct e1000_adapter *adapter = tx_ring->adapter; netif_stop_queue(adapter->netdev); - /* - * Herbert's original patch had: + /* Herbert's original patch had: * smp_mb__after_netif_stop_queue(); * but since that doesn't exist yet, just open code it. */ smp_mb(); - /* - * We need to check again in a case another CPU has just + /* We need to check again in a case another CPU has just * made room available. */ if (e1000_desc_unused(tx_ring) < size) @@ -5067,8 +5006,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, return NETDEV_TX_OK; } - /* - * The minimum packet size with TCTL.PSP set is 17 bytes so + /* The minimum packet size with TCTL.PSP set is 17 bytes so * pad skb in order to meet this minimum size requirement */ if (unlikely(skb->len < 17)) { @@ -5082,14 +5020,12 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if (mss) { u8 hdr_len; - /* - * TSO Workaround for 82571/2/3 Controllers -- if skb->data + /* TSO Workaround for 82571/2/3 Controllers -- if skb->data * points to just header, pull a few bytes of payload from * frags into skb->data */ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - /* - * we do this workaround for ES2LAN, but it is un-necessary, + /* we do this workaround for ES2LAN, but it is un-necessary, * avoiding it could save a lot of cycles */ if (skb->data_len && (hdr_len == len)) { @@ -5120,8 +5056,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if (adapter->hw.mac.tx_pkt_filtering) e1000_transfer_dhcp_info(adapter, skb); - /* - * need: count + 2 desc gap to keep tail from touching + /* need: count + 2 desc gap to keep tail from touching * head, otherwise try next time */ if (e1000_maybe_stop_tx(tx_ring, count + 2)) @@ -5145,8 +5080,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, else if (e1000_tx_csum(tx_ring, skb)) tx_flags |= E1000_TX_FLAGS_CSUM; - /* - * Old method was to assume IPv4 packet by default if TSO was enabled. + /* Old method was to assume IPv4 packet by default if TSO was enabled. * 82571 hardware supports TSO capabilities for IPv6 as well... * no longer assume, we must. */ @@ -5233,8 +5167,7 @@ struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev, /* Rx Errors */ - /* - * RLEC on some newer hardware can be incorrect so build + /* RLEC on some newer hardware can be incorrect so build * our own version based on RUC and ROC */ stats->rx_errors = adapter->stats.rxerrc + @@ -5303,8 +5236,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) if (netif_running(netdev)) e1000e_down(adapter); - /* - * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN + /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN * means we reserve 2 more, this pushes us to allocate from the next * larger slab size. * i.e. RXBUFFER_2048 --> size-4096 slab @@ -5566,8 +5498,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, if (adapter->hw.phy.type == e1000_phy_igp_3) e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); - /* - * Release control of h/w to f/w. If f/w is AMT enabled, this + /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ e1000e_release_hw_control(adapter); @@ -5594,8 +5525,7 @@ static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - /* - * The pci-e switch on some quad port adapters will report a + /* The pci-e switch on some quad port adapters will report a * correctable error when the MAC transitions from D0 to D3. To * prevent this we need to mask off the correctable errors on the * downstream port of the pci-e switch. @@ -5624,8 +5554,7 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) #else static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state) { - /* - * Both device and parent should have the same ASPM setting. + /* Both device and parent should have the same ASPM setting. * Disable ASPM in downstream component first and then upstream. */ pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, state); @@ -5719,8 +5648,7 @@ static int __e1000_resume(struct pci_dev *pdev) netif_device_attach(netdev); - /* - * If the controller has AMT, do not set DRV_LOAD until the interface + /* If the controller has AMT, do not set DRV_LOAD until the interface * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ @@ -5848,7 +5776,10 @@ static irqreturn_t e1000_intr_msix(int irq, void *data) return IRQ_HANDLED; } -/* +/** + * e1000_netpoll + * @netdev: network interface device structure + * * Polling 'interrupt' - used by things like netconsole to send skbs * without having to re-enable interrupts. It's not called while * the interrupt routine is executing. @@ -5973,8 +5904,7 @@ static void e1000_io_resume(struct pci_dev *pdev) netif_device_attach(netdev); - /* - * If the controller has AMT, do not set DRV_LOAD until the interface + /* If the controller has AMT, do not set DRV_LOAD until the interface * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ @@ -6273,14 +6203,12 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (e1000e_enable_mng_pass_thru(&adapter->hw)) adapter->flags |= FLAG_MNG_PT_ENABLED; - /* - * before reading the NVM, reset the controller to + /* before reading the NVM, reset the controller to * put the device in a known good starting state */ adapter->hw.mac.ops.reset_hw(&adapter->hw); - /* - * systems with ASPM and others may see the checksum fail on the first + /* systems with ASPM and others may see the checksum fail on the first * attempt. Let's give it a few tries */ for (i = 0;; i++) { @@ -6335,8 +6263,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->rx_ring->count = E1000_DEFAULT_RXD; adapter->tx_ring->count = E1000_DEFAULT_TXD; - /* - * Initial Wake on LAN setting - If APM wake is enabled in + /* Initial Wake on LAN setting - If APM wake is enabled in * the EEPROM, enable the ACPI Magic Packet filter */ if (adapter->flags & FLAG_APME_IN_WUC) { @@ -6360,8 +6287,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (eeprom_data & eeprom_apme_mask) adapter->eeprom_wol |= E1000_WUFC_MAG; - /* - * now that we have the eeprom settings, apply the special cases + /* now that we have the eeprom settings, apply the special cases * where the eeprom may be wrong or the board simply won't support * wake on lan on a particular port */ @@ -6378,8 +6304,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* reset the hardware with the new settings */ e1000e_reset(adapter); - /* - * If the controller has AMT, do not set DRV_LOAD until the interface + /* If the controller has AMT, do not set DRV_LOAD until the interface * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ @@ -6442,8 +6367,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev) struct e1000_adapter *adapter = netdev_priv(netdev); bool down = test_bit(__E1000_DOWN, &adapter->state); - /* - * The timers may be rescheduled, so explicitly disable them + /* The timers may be rescheduled, so explicitly disable them * from being rescheduled. */ if (!down) @@ -6468,8 +6392,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev) if (pci_dev_run_wake(pdev)) pm_runtime_get_noresume(&pdev->dev); - /* - * Release control of h/w to f/w. If f/w is AMT enabled, this + /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ e1000e_release_hw_control(adapter); diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c index a969f1af1b4..b6468804cb2 100644 --- a/drivers/net/ethernet/intel/e1000e/nvm.c +++ b/drivers/net/ethernet/intel/e1000e/nvm.c @@ -279,8 +279,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) e1e_flush(); udelay(1); - /* - * Read "Status Register" repeatedly until the LSB is cleared. + /* Read "Status Register" repeatedly until the LSB is cleared. * The EEPROM will signal that the command has been completed * by clearing bit 0 of the internal status register. If it's * not cleared within 'timeout', then error out. @@ -321,8 +320,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) u32 i, eerd = 0; s32 ret_val = 0; - /* - * A check for invalid values: offset too large, too many words, + /* A check for invalid values: offset too large, too many words, * too many words for the offset, and not enough words. */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || @@ -364,8 +362,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) s32 ret_val; u16 widx = 0; - /* - * A check for invalid values: offset too large, too many words, + /* A check for invalid values: offset too large, too many words, * and not enough words. */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || @@ -393,8 +390,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) e1000_standby_nvm(hw); - /* - * Some SPI eeproms use the 8th address bit embedded in the + /* Some SPI eeproms use the 8th address bit embedded in the * opcode */ if ((nvm->address_bits == 8) && (offset >= 128)) @@ -461,8 +457,7 @@ s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, return ret_val; } - /* - * if nvm_data is not ptr guard the PBA must be in legacy format which + /* if nvm_data is not ptr guard the PBA must be in legacy format which * means pba_ptr is actually our second data word for the PBA number * and we can decode it into an ascii string */ diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index dfbfa7fd98c..1fbb31554e4 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -32,11 +32,9 @@ #include "e1000.h" -/* - * This is the only thing that needs to be changed to adjust the +/* This is the only thing that needs to be changed to adjust the * maximum number of ports that the driver can manage. */ - #define E1000_MAX_NIC 32 #define OPTION_UNSET -1 @@ -49,12 +47,10 @@ module_param(copybreak, uint, 0644); MODULE_PARM_DESC(copybreak, "Maximum size of packet that is copied to a new buffer on receive"); -/* - * All parameters are treated the same, as an integer array of values. +/* All parameters are treated the same, as an integer array of values. * This macro just reduces the need to repeat the same declaration code * over and over (plus this helps to avoid typo bugs). */ - #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET } #define E1000_PARAM(X, desc) \ static int __devinitdata X[E1000_MAX_NIC+1] \ @@ -63,8 +59,7 @@ MODULE_PARM_DESC(copybreak, module_param_array_named(X, X, int, &num_##X, 0); \ MODULE_PARM_DESC(X, desc); -/* - * Transmit Interrupt Delay in units of 1.024 microseconds +/* Transmit Interrupt Delay in units of 1.024 microseconds * Tx interrupt delay needs to typically be set to something non-zero * * Valid Range: 0-65535 @@ -74,8 +69,7 @@ E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay"); #define MAX_TXDELAY 0xFFFF #define MIN_TXDELAY 0 -/* - * Transmit Absolute Interrupt Delay in units of 1.024 microseconds +/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds * * Valid Range: 0-65535 */ @@ -84,8 +78,7 @@ E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay"); #define MAX_TXABSDELAY 0xFFFF #define MIN_TXABSDELAY 0 -/* - * Receive Interrupt Delay in units of 1.024 microseconds +/* Receive Interrupt Delay in units of 1.024 microseconds * hardware will likely hang if you set this to anything but zero. * * Valid Range: 0-65535 @@ -94,8 +87,7 @@ E1000_PARAM(RxIntDelay, "Receive Interrupt Delay"); #define MAX_RXDELAY 0xFFFF #define MIN_RXDELAY 0 -/* - * Receive Absolute Interrupt Delay in units of 1.024 microseconds +/* Receive Absolute Interrupt Delay in units of 1.024 microseconds * * Valid Range: 0-65535 */ @@ -103,8 +95,7 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); #define MAX_RXABSDELAY 0xFFFF #define MIN_RXABSDELAY 0 -/* - * Interrupt Throttle Rate (interrupts/sec) +/* Interrupt Throttle Rate (interrupts/sec) * * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative */ @@ -113,8 +104,7 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); #define MAX_ITR 100000 #define MIN_ITR 100 -/* - * IntMode (Interrupt Mode) +/* IntMode (Interrupt Mode) * * Valid Range: varies depending on kernel configuration & hardware support * @@ -132,8 +122,7 @@ E1000_PARAM(IntMode, "Interrupt Mode"); #define MAX_INTMODE 2 #define MIN_INTMODE 0 -/* - * Enable Smart Power Down of the PHY +/* Enable Smart Power Down of the PHY * * Valid Range: 0, 1 * @@ -141,8 +130,7 @@ E1000_PARAM(IntMode, "Interrupt Mode"); */ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); -/* - * Enable Kumeran Lock Loss workaround +/* Enable Kumeran Lock Loss workaround * * Valid Range: 0, 1 * @@ -150,8 +138,7 @@ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); */ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); -/* - * Write Protect NVM +/* Write Protect NVM * * Valid Range: 0, 1 * @@ -159,8 +146,7 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); */ E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]"); -/* - * Enable CRC Stripping +/* Enable CRC Stripping * * Valid Range: 0, 1 * @@ -351,8 +337,7 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) if (num_InterruptThrottleRate > bd) { adapter->itr = InterruptThrottleRate[bd]; - /* - * Make sure a message is printed for non-special + /* Make sure a message is printed for non-special * values. And in case of an invalid option, display * warning, use default and go through itr/itr_setting * adjustment logic below @@ -361,14 +346,12 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) e1000_validate_option(&adapter->itr, &opt, adapter)) adapter->itr = opt.def; } else { - /* - * If no option specified, use default value and go + /* If no option specified, use default value and go * through the logic below to adjust itr/itr_setting */ adapter->itr = opt.def; - /* - * Make sure a message is printed for non-special + /* Make sure a message is printed for non-special * default values */ if (adapter->itr > 4) @@ -400,8 +383,7 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) opt.name); break; default: - /* - * Save the setting, because the dynamic bits + /* Save the setting, because the dynamic bits * change itr. * * Clear the lower two bits because diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index fc62a3f3a5b..28b38ff37e8 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -193,8 +193,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) return -E1000_ERR_PARAM; } - /* - * Set up Op-code, Phy Address, and register offset in the MDI + /* Set up Op-code, Phy Address, and register offset in the MDI * Control register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ @@ -204,8 +203,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) ew32(MDIC, mdic); - /* - * Poll the ready bit to see if the MDI read completed + /* Poll the ready bit to see if the MDI read completed * Increasing the time out as testing showed failures with * the lower time out */ @@ -225,8 +223,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) } *data = (u16) mdic; - /* - * Allow some time after each MDIC transaction to avoid + /* Allow some time after each MDIC transaction to avoid * reading duplicate data in the next MDIC transaction. */ if (hw->mac.type == e1000_pch2lan) @@ -253,8 +250,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) return -E1000_ERR_PARAM; } - /* - * Set up Op-code, Phy Address, and register offset in the MDI + /* Set up Op-code, Phy Address, and register offset in the MDI * Control register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ @@ -265,8 +261,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) ew32(MDIC, mdic); - /* - * Poll the ready bit to see if the MDI read completed + /* Poll the ready bit to see if the MDI read completed * Increasing the time out as testing showed failures with * the lower time out */ @@ -285,8 +280,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) return -E1000_ERR_PHY; } - /* - * Allow some time after each MDIC transaction to avoid + /* Allow some time after each MDIC transaction to avoid * reading duplicate data in the next MDIC transaction. */ if (hw->mac.type == e1000_pch2lan) @@ -708,8 +702,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) if (ret_val) return ret_val; phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK; - /* - * Options: + /* Options: * 0 - Auto (default) * 1 - MDI mode * 2 - MDI-X mode @@ -754,8 +747,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) if (phy->type != e1000_phy_bm) phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; - /* - * Options: + /* Options: * MDI/MDI-X = 0 (default) * 0 - Auto for all speeds * 1 - MDI mode @@ -780,8 +772,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) break; } - /* - * Options: + /* Options: * disable_polarity_correction = 0 (default) * Automatic Correction for Reversed Cable Polarity * 0 - Disabled @@ -818,8 +809,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) if ((phy->type == e1000_phy_m88) && (phy->revision < E1000_REVISION_4) && (phy->id != BME1000_E_PHY_ID_R2)) { - /* - * Force TX_CLK in the Extended PHY Specific Control Register + /* Force TX_CLK in the Extended PHY Specific Control Register * to 25MHz clock. */ ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); @@ -899,8 +889,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) return ret_val; } - /* - * Wait 100ms for MAC to configure PHY from NVM settings, to avoid + /* Wait 100ms for MAC to configure PHY from NVM settings, to avoid * timeout issues when LFS is enabled. */ msleep(100); @@ -936,8 +925,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) /* set auto-master slave resolution settings */ if (hw->mac.autoneg) { - /* - * when autonegotiation advertisement is only 1000Mbps then we + /* when autonegotiation advertisement is only 1000Mbps then we * should disable SmartSpeed and enable Auto MasterSlave * resolution as hardware default. */ @@ -1001,16 +989,14 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) return ret_val; } - /* - * Need to parse both autoneg_advertised and fc and set up + /* Need to parse both autoneg_advertised and fc and set up * the appropriate PHY registers. First we will parse for * autoneg_advertised software override. Since we can advertise * a plethora of combinations, we need to check each bit * individually. */ - /* - * First we clear all the 10/100 mb speed bits in the Auto-Neg + /* First we clear all the 10/100 mb speed bits in the Auto-Neg * Advertisement Register (Address 4) and the 1000 mb speed bits in * the 1000Base-T Control Register (Address 9). */ @@ -1056,8 +1042,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; } - /* - * Check for a software override of the flow control settings, and + /* Check for a software override of the flow control settings, and * setup the PHY advertisement registers accordingly. If * auto-negotiation is enabled, then software will have to set the * "PAUSE" bits to the correct value in the Auto-Negotiation @@ -1076,15 +1061,13 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) */ switch (hw->fc.current_mode) { case e1000_fc_none: - /* - * Flow control (Rx & Tx) is completely disabled by a + /* Flow control (Rx & Tx) is completely disabled by a * software over-ride. */ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; case e1000_fc_rx_pause: - /* - * Rx Flow control is enabled, and Tx Flow control is + /* Rx Flow control is enabled, and Tx Flow control is * disabled, by a software over-ride. * * Since there really isn't a way to advertise that we are @@ -1096,16 +1079,14 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; case e1000_fc_tx_pause: - /* - * Tx Flow control is enabled, and Rx Flow control is + /* Tx Flow control is enabled, and Rx Flow control is * disabled, by a software over-ride. */ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; break; case e1000_fc_full: - /* - * Flow control (both Rx and Tx) is enabled by a software + /* Flow control (both Rx and Tx) is enabled by a software * over-ride. */ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); @@ -1142,14 +1123,12 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) s32 ret_val; u16 phy_ctrl; - /* - * Perform some bounds checking on the autoneg advertisement + /* Perform some bounds checking on the autoneg advertisement * parameter. */ phy->autoneg_advertised &= phy->autoneg_mask; - /* - * If autoneg_advertised is zero, we assume it was not defaulted + /* If autoneg_advertised is zero, we assume it was not defaulted * by the calling code so we set to advertise full capability. */ if (!phy->autoneg_advertised) @@ -1163,8 +1142,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) } e_dbg("Restarting Auto-Neg\n"); - /* - * Restart auto-negotiation by setting the Auto Neg Enable bit and + /* Restart auto-negotiation by setting the Auto Neg Enable bit and * the Auto Neg Restart bit in the PHY control register. */ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl); @@ -1176,8 +1154,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * Does the user want to wait for Auto-Neg to complete here, or + /* Does the user want to wait for Auto-Neg to complete here, or * check at a later time (for example, callback routine). */ if (phy->autoneg_wait_to_complete) { @@ -1208,16 +1185,14 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw) bool link; if (hw->mac.autoneg) { - /* - * Setup autoneg and flow control advertisement and perform + /* Setup autoneg and flow control advertisement and perform * autonegotiation. */ ret_val = e1000_copper_link_autoneg(hw); if (ret_val) return ret_val; } else { - /* - * PHY will be set to 10H, 10F, 100H or 100F + /* PHY will be set to 10H, 10F, 100H or 100F * depending on user settings. */ e_dbg("Forcing Speed and Duplex\n"); @@ -1228,8 +1203,7 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw) } } - /* - * Check link status. Wait up to 100 microseconds for link to become + /* Check link status. Wait up to 100 microseconds for link to become * valid. */ ret_val = e1000e_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10, @@ -1273,8 +1247,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * Clear Auto-Crossover to force MDI manually. IGP requires MDI + /* Clear Auto-Crossover to force MDI manually. IGP requires MDI * forced whenever speed and duplex are forced. */ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); @@ -1328,8 +1301,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) u16 phy_data; bool link; - /* - * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI + /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI * forced whenever speed and duplex are forced. */ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); @@ -1370,8 +1342,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (hw->phy.type != e1000_phy_m88) { e_dbg("Link taking longer than expected.\n"); } else { - /* - * We didn't get link. + /* We didn't get link. * Reset the DSP and cross our fingers. */ ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT, @@ -1398,8 +1369,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * Resetting the phy means we need to re-force TX_CLK in the + /* Resetting the phy means we need to re-force TX_CLK in the * Extended PHY Specific Control Register to 25MHz clock from * the reset value of 2.5MHz. */ @@ -1408,8 +1378,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * In addition, we must re-enable CRS on Tx for both half and full + /* In addition, we must re-enable CRS on Tx for both half and full * duplex. */ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); @@ -1573,8 +1542,7 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active) ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); if (ret_val) return ret_val; - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable * SmartSpeed, so performance is maintained. @@ -1702,8 +1670,7 @@ s32 e1000_check_polarity_igp(struct e1000_hw *hw) s32 ret_val; u16 data, offset, mask; - /* - * Polarity is determined based on the speed of + /* Polarity is determined based on the speed of * our connection. */ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data); @@ -1715,8 +1682,7 @@ s32 e1000_check_polarity_igp(struct e1000_hw *hw) offset = IGP01E1000_PHY_PCS_INIT_REG; mask = IGP01E1000_PHY_POLARITY_MASK; } else { - /* - * This really only applies to 10Mbps since + /* This really only applies to 10Mbps since * there is no polarity for 100Mbps (always 0). */ offset = IGP01E1000_PHY_PORT_STATUS; @@ -1745,8 +1711,7 @@ s32 e1000_check_polarity_ife(struct e1000_hw *hw) s32 ret_val; u16 phy_data, offset, mask; - /* - * Polarity is determined based on the reversal feature being enabled. + /* Polarity is determined based on the reversal feature being enabled. */ if (phy->polarity_correction) { offset = IFE_PHY_EXTENDED_STATUS_CONTROL; @@ -1791,8 +1756,7 @@ static s32 e1000_wait_autoneg(struct e1000_hw *hw) msleep(100); } - /* - * PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation + /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation * has completed. */ return ret_val; @@ -1814,15 +1778,13 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, u16 i, phy_status; for (i = 0; i < iterations; i++) { - /* - * Some PHYs require the PHY_STATUS register to be read + /* Some PHYs require the PHY_STATUS register to be read * twice due to the link bit being sticky. No harm doing * it across the board. */ ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status); if (ret_val) - /* - * If the first read fails, another entity may have + /* If the first read fails, another entity may have * ownership of the resources, wait and try again to * see if they have relinquished the resources yet. */ @@ -1913,8 +1875,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw) if (ret_val) return ret_val; - /* - * Getting bits 15:9, which represent the combination of + /* Getting bits 15:9, which represent the combination of * coarse and fine gain values. The result is a number * that can be put into the lookup table to obtain the * approximate cable length. @@ -2285,15 +2246,13 @@ s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw) e1e_wphy(hw, 0x1796, 0x0008); /* Change cg_icount + enable integbp for channels BCD */ e1e_wphy(hw, 0x1798, 0xD008); - /* - * Change cg_icount + enable integbp + change prop_factor_master + /* Change cg_icount + enable integbp + change prop_factor_master * to 8 for channel A */ e1e_wphy(hw, 0x1898, 0xD918); /* Disable AHT in Slave mode on channel A */ e1e_wphy(hw, 0x187A, 0x0800); - /* - * Enable LPLU and disable AN to 1000 in non-D0a states, + /* Enable LPLU and disable AN to 1000 in non-D0a states, * Enable SPD+B2B */ e1e_wphy(hw, 0x0019, 0x008D); @@ -2417,8 +2376,7 @@ s32 e1000e_determine_phy_address(struct e1000_hw *hw) e1000e_get_phy_id(hw); phy_type = e1000e_get_phy_type_from_id(hw->phy.id); - /* - * If phy_type is valid, break - we found our + /* If phy_type is valid, break - we found our * PHY address */ if (phy_type != e1000_phy_unknown) @@ -2478,8 +2436,7 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) if (offset > MAX_PHY_MULTI_PAGE_REG) { u32 page_shift, page_select; - /* - * Page select is register 31 for phy address 1 and 22 for + /* Page select is register 31 for phy address 1 and 22 for * phy address 2 and 3. Page select is shifted only for * phy address 1. */ @@ -2537,8 +2494,7 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) if (offset > MAX_PHY_MULTI_PAGE_REG) { u32 page_shift, page_select; - /* - * Page select is register 31 for phy address 1 and 22 for + /* Page select is register 31 for phy address 1 and 22 for * phy address 2 and 3. Page select is shifted only for * phy address 1. */ @@ -2683,8 +2639,7 @@ s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg) return ret_val; } - /* - * Enable both PHY wakeup mode and Wakeup register page writes. + /* Enable both PHY wakeup mode and Wakeup register page writes. * Prevent a power state change by disabling ME and Host PHY wakeup. */ temp = *phy_reg; @@ -2698,8 +2653,7 @@ s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg) return ret_val; } - /* - * Select Host Wakeup Registers page - caller now able to write + /* Select Host Wakeup Registers page - caller now able to write * registers on the Wakeup registers page */ return e1000_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT)); @@ -3038,8 +2992,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, if (page == HV_INTC_FC_PAGE_START) page = 0; - /* - * Workaround MDIO accesses being disabled after entering IEEE + /* Workaround MDIO accesses being disabled after entering IEEE * Power Down (when bit 11 of the PHY Control register is set) */ if ((hw->phy.type == e1000_phy_82578) && diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 8c12dbd0d6c..fdaaf2709d0 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -1028,6 +1028,15 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) * continue to check for link. */ hw->mac.get_link_status = !hw->mac.serdes_has_link; + + /* Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control + * settings because we may have had to re-autoneg with a + * different link partner. + */ + ret_val = igb_config_fc_after_link_up(hw); + if (ret_val) + hw_dbg("Error configuring flow control\n"); } else { ret_val = igb_check_for_copper_link(hw); } @@ -1345,7 +1354,7 @@ out: **/ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) { - u32 ctrl_ext, ctrl_reg, reg; + u32 ctrl_ext, ctrl_reg, reg, anadv_reg; bool pcs_autoneg; s32 ret_val = E1000_SUCCESS; u16 data; @@ -1433,27 +1442,45 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw) reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP | E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); - /* - * We force flow control to prevent the CTRL register values from being - * overwritten by the autonegotiated flow control values - */ - reg |= E1000_PCS_LCTL_FORCE_FCTRL; - if (pcs_autoneg) { /* Set PCS register for autoneg */ reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ + + /* Disable force flow control for autoneg */ + reg &= ~E1000_PCS_LCTL_FORCE_FCTRL; + + /* Configure flow control advertisement for autoneg */ + anadv_reg = rd32(E1000_PCS_ANADV); + anadv_reg &= ~(E1000_TXCW_ASM_DIR | E1000_TXCW_PAUSE); + switch (hw->fc.requested_mode) { + case e1000_fc_full: + case e1000_fc_rx_pause: + anadv_reg |= E1000_TXCW_ASM_DIR; + anadv_reg |= E1000_TXCW_PAUSE; + break; + case e1000_fc_tx_pause: + anadv_reg |= E1000_TXCW_ASM_DIR; + break; + default: + break; + } + wr32(E1000_PCS_ANADV, anadv_reg); + hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg); } else { /* Set PCS register for forced link */ reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ + /* Force flow control for forced link */ + reg |= E1000_PCS_LCTL_FORCE_FCTRL; + hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg); } wr32(E1000_PCS_LCTL, reg); - if (!igb_sgmii_active_82575(hw)) + if (!pcs_autoneg && !igb_sgmii_active_82575(hw)) igb_force_mac_fc(hw); return ret_val; @@ -1927,6 +1954,12 @@ static s32 igb_reset_hw_82580(struct e1000_hw *hw) hw->dev_spec._82575.global_device_reset = false; + /* due to hw errata, global device reset doesn't always + * work on 82580 + */ + if (hw->mac.type == e1000_82580) + global_device_reset = false; + /* Get current control state. */ ctrl = rd32(E1000_CTRL); diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h index 198d1484882..45dce06eff2 100644 --- a/drivers/net/ethernet/intel/igb/e1000_defines.h +++ b/drivers/net/ethernet/intel/igb/e1000_defines.h @@ -431,6 +431,10 @@ #define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 #define FLOW_CONTROL_TYPE 0x8808 +/* Transmit Config Word */ +#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ +#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ + /* 802.1q VLAN Packet Size */ #define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */ #define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ @@ -539,6 +543,9 @@ /* mPHY Near End Digital Loopback Override Bit */ #define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10 +#define E1000_PCS_LCTL_FORCE_FCTRL 0x80 +#define E1000_PCS_LSTS_AN_COMPLETE 0x10000 + /* PHY Control Register */ #define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ #define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c index 41474298d36..fbcdbebb0b5 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.c +++ b/drivers/net/ethernet/intel/igb/e1000_i210.c @@ -35,11 +35,42 @@ #include "e1000_hw.h" #include "e1000_i210.h" -static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw); -static void igb_put_hw_semaphore_i210(struct e1000_hw *hw); -static s32 igb_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); -static s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw); +/** + * igb_get_hw_semaphore_i210 - Acquire hardware semaphore + * @hw: pointer to the HW structure + * + * Acquire the HW semaphore to access the PHY or NVM + */ +static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw) +{ + u32 swsm; + s32 ret_val = E1000_SUCCESS; + s32 timeout = hw->nvm.word_size + 1; + s32 i = 0; + + /* Get the FW semaphore. */ + for (i = 0; i < timeout; i++) { + swsm = rd32(E1000_SWSM); + wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI); + + /* Semaphore acquired if bit latched */ + if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI) + break; + + udelay(50); + } + + if (i == timeout) { + /* Release semaphores */ + igb_put_hw_semaphore(hw); + hw_dbg("Driver can't access the NVM\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + +out: + return ret_val; +} /** * igb_acquire_nvm_i210 - Request for access to EEPROM @@ -68,6 +99,23 @@ void igb_release_nvm_i210(struct e1000_hw *hw) } /** + * igb_put_hw_semaphore_i210 - Release hardware semaphore + * @hw: pointer to the HW structure + * + * Release hardware semaphore used to access the PHY or NVM + */ +static void igb_put_hw_semaphore_i210(struct e1000_hw *hw) +{ + u32 swsm; + + swsm = rd32(E1000_SWSM); + + swsm &= ~E1000_SWSM_SWESMBI; + + wr32(E1000_SWSM, swsm); +} + +/** * igb_acquire_swfw_sync_i210 - Acquire SW/FW semaphore * @hw: pointer to the HW structure * @mask: specifies which semaphore to acquire @@ -138,60 +186,6 @@ void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask) } /** - * igb_get_hw_semaphore_i210 - Acquire hardware semaphore - * @hw: pointer to the HW structure - * - * Acquire the HW semaphore to access the PHY or NVM - **/ -static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw) -{ - u32 swsm; - s32 ret_val = E1000_SUCCESS; - s32 timeout = hw->nvm.word_size + 1; - s32 i = 0; - - /* Get the FW semaphore. */ - for (i = 0; i < timeout; i++) { - swsm = rd32(E1000_SWSM); - wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI); - - /* Semaphore acquired if bit latched */ - if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI) - break; - - udelay(50); - } - - if (i == timeout) { - /* Release semaphores */ - igb_put_hw_semaphore(hw); - hw_dbg("Driver can't access the NVM\n"); - ret_val = -E1000_ERR_NVM; - goto out; - } - -out: - return ret_val; -} - -/** - * igb_put_hw_semaphore_i210 - Release hardware semaphore - * @hw: pointer to the HW structure - * - * Release hardware semaphore used to access the PHY or NVM - **/ -static void igb_put_hw_semaphore_i210(struct e1000_hw *hw) -{ - u32 swsm; - - swsm = rd32(E1000_SWSM); - - swsm &= ~E1000_SWSM_SWESMBI; - - wr32(E1000_SWSM, swsm); -} - -/** * igb_read_nvm_srrd_i210 - Reads Shadow Ram using EERD register * @hw: pointer to the HW structure * @offset: offset of word in the Shadow Ram to read @@ -229,49 +223,6 @@ s32 igb_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words, } /** - * igb_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR - * @hw: pointer to the HW structure - * @offset: offset within the Shadow RAM to be written to - * @words: number of words to write - * @data: 16 bit word(s) to be written to the Shadow RAM - * - * Writes data to Shadow RAM at offset using EEWR register. - * - * If e1000_update_nvm_checksum is not called after this function , the - * data will not be committed to FLASH and also Shadow RAM will most likely - * contain an invalid checksum. - * - * If error code is returned, data and Shadow RAM may be inconsistent - buffer - * partially written. - **/ -s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) -{ - s32 status = E1000_SUCCESS; - u16 i, count; - - /* We cannot hold synchronization semaphores for too long, - * because of forceful takeover procedure. However it is more efficient - * to write in bursts than synchronizing access for each word. */ - for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) { - count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ? - E1000_EERD_EEWR_MAX_COUNT : (words - i); - if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { - status = igb_write_nvm_srwr(hw, offset, count, - data + i); - hw->nvm.ops.release(hw); - } else { - status = E1000_ERR_SWFW_SYNC; - } - - if (status != E1000_SUCCESS) - break; - } - - return status; -} - -/** * igb_write_nvm_srwr - Write to Shadow Ram using EEWR * @hw: pointer to the HW structure * @offset: offset within the Shadow Ram to be written to @@ -329,6 +280,50 @@ out: } /** + * igb_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR + * @hw: pointer to the HW structure + * @offset: offset within the Shadow RAM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the Shadow RAM + * + * Writes data to Shadow RAM at offset using EEWR register. + * + * If e1000_update_nvm_checksum is not called after this function , the + * data will not be committed to FLASH and also Shadow RAM will most likely + * contain an invalid checksum. + * + * If error code is returned, data and Shadow RAM may be inconsistent - buffer + * partially written. + */ +s32 igb_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + s32 status = E1000_SUCCESS; + u16 i, count; + + /* We cannot hold synchronization semaphores for too long, + * because of forceful takeover procedure. However it is more efficient + * to write in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) { + count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ? + E1000_EERD_EEWR_MAX_COUNT : (words - i); + if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { + status = igb_write_nvm_srwr(hw, offset, count, + data + i); + hw->nvm.ops.release(hw); + } else { + status = E1000_ERR_SWFW_SYNC; + } + + if (status != E1000_SUCCESS) + break; + } + + return status; +} + +/** * igb_read_nvm_i211 - Read NVM wrapper function for I211 * @hw: pointer to the HW structure * @address: the word address (aka eeprom offset) to read @@ -350,16 +345,40 @@ s32 igb_read_nvm_i211(struct e1000_hw *hw, u16 offset, u16 words, if (ret_val != E1000_SUCCESS) hw_dbg("MAC Addr not found in iNVM\n"); break; - case NVM_ID_LED_SETTINGS: case NVM_INIT_CTRL_2: + ret_val = igb_read_invm_i211(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_INIT_CTRL_2_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; case NVM_INIT_CTRL_4: + ret_val = igb_read_invm_i211(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_INIT_CTRL_4_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; case NVM_LED_1_CFG: + ret_val = igb_read_invm_i211(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_LED_1_CFG_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; case NVM_LED_0_2_CFG: igb_read_invm_i211(hw, offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_LED_0_2_CFG_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } break; - case NVM_COMPAT: - *data = ID_LED_DEFAULT_I210; - break; + case NVM_ID_LED_SETTINGS: + ret_val = igb_read_invm_i211(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = ID_LED_RESERVED_FFFF; + ret_val = E1000_SUCCESS; + } case NVM_SUB_DEV_ID: *data = hw->subsystem_device_id; break; @@ -613,6 +632,28 @@ out: } /** + * igb_pool_flash_update_done_i210 - Pool FLUDONE status. + * @hw: pointer to the HW structure + * + */ +static s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw) +{ + s32 ret_val = -E1000_ERR_NVM; + u32 i, reg; + + for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) { + reg = rd32(E1000_EECD); + if (reg & E1000_EECD_FLUDONE_I210) { + ret_val = E1000_SUCCESS; + break; + } + udelay(5); + } + + return ret_val; +} + +/** * igb_update_flash_i210 - Commit EEPROM to the flash * @hw: pointer to the HW structure * @@ -642,28 +683,6 @@ out: } /** - * igb_pool_flash_update_done_i210 - Pool FLUDONE status. - * @hw: pointer to the HW structure - * - **/ -s32 igb_pool_flash_update_done_i210(struct e1000_hw *hw) -{ - s32 ret_val = -E1000_ERR_NVM; - u32 i, reg; - - for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) { - reg = rd32(E1000_EECD); - if (reg & E1000_EECD_FLUDONE_I210) { - ret_val = E1000_SUCCESS; - break; - } - udelay(5); - } - - return ret_val; -} - -/** * igb_valid_led_default_i210 - Verify a valid default LED config * @hw: pointer to the HW structure * @data: pointer to the NVM (EEPROM) diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h index 974d23584d7..1c89358a99a 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.h +++ b/drivers/net/ethernet/intel/igb/e1000_i210.h @@ -84,4 +84,10 @@ enum E1000_INVM_STRUCTURE_TYPE { (ID_LED_DEF1_DEF2 << 4) | \ (ID_LED_DEF1_DEF2)) +/* NVM offset defaults for i211 device */ +#define NVM_INIT_CTRL_2_DEFAULT_I211 0X7243 +#define NVM_INIT_CTRL_4_DEFAULT_I211 0x00C1 +#define NVM_LED_1_CFG_DEFAULT_I211 0x0184 +#define NVM_LED_0_2_CFG_DEFAULT_I211 0x200C + #endif diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c index 7acddfe9e6d..101e6e4da97 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mac.c +++ b/drivers/net/ethernet/intel/igb/e1000_mac.c @@ -839,6 +839,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) { struct e1000_mac_info *mac = &hw->mac; s32 ret_val = 0; + u32 pcs_status_reg, pcs_adv_reg, pcs_lp_ability_reg, pcs_ctrl_reg; u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; u16 speed, duplex; @@ -1040,6 +1041,129 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) goto out; } } + /* Check for the case where we have SerDes media and auto-neg is + * enabled. In this case, we need to check and see if Auto-Neg + * has completed, and if so, how the PHY and link partner has + * flow control configured. + */ + if ((hw->phy.media_type == e1000_media_type_internal_serdes) + && mac->autoneg) { + /* Read the PCS_LSTS and check to see if AutoNeg + * has completed. + */ + pcs_status_reg = rd32(E1000_PCS_LSTAT); + + if (!(pcs_status_reg & E1000_PCS_LSTS_AN_COMPLETE)) { + hw_dbg("PCS Auto Neg has not completed.\n"); + return ret_val; + } + + /* The AutoNeg process has completed, so we now need to + * read both the Auto Negotiation Advertisement + * Register (PCS_ANADV) and the Auto_Negotiation Base + * Page Ability Register (PCS_LPAB) to determine how + * flow control was negotiated. + */ + pcs_adv_reg = rd32(E1000_PCS_ANADV); + pcs_lp_ability_reg = rd32(E1000_PCS_LPAB); + + /* Two bits in the Auto Negotiation Advertisement Register + * (PCS_ANADV) and two bits in the Auto Negotiation Base + * Page Ability Register (PCS_LPAB) determine flow control + * for both the PHY and the link partner. The following + * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, + * 1999, describes these PAUSE resolution bits and how flow + * control is determined based upon these settings. + * NOTE: DC = Don't Care + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution + *-------|---------|-------|---------|-------------------- + * 0 | 0 | DC | DC | e1000_fc_none + * 0 | 1 | 0 | DC | e1000_fc_none + * 0 | 1 | 1 | 0 | e1000_fc_none + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 1 | 0 | 0 | DC | e1000_fc_none + * 1 | DC | 1 | DC | e1000_fc_full + * 1 | 1 | 0 | 0 | e1000_fc_none + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * + * Are both PAUSE bits set to 1? If so, this implies + * Symmetric Flow Control is enabled at both ends. The + * ASM_DIR bits are irrelevant per the spec. + * + * For Symmetric Flow Control: + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | DC | 1 | DC | e1000_fc_full + * + */ + if ((pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_PAUSE)) { + /* Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise Rx + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == e1000_fc_full) { + hw->fc.current_mode = e1000_fc_full; + hw_dbg("Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = e1000_fc_rx_pause; + hw_dbg("Flow Control = Rx PAUSE frames only.\n"); + } + } + /* For receiving PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + */ + else if (!(pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_adv_reg & E1000_TXCW_ASM_DIR) && + (pcs_lp_ability_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_tx_pause; + hw_dbg("Flow Control = Tx PAUSE frames only.\n"); + } + /* For transmitting PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + */ + else if ((pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_adv_reg & E1000_TXCW_ASM_DIR) && + !(pcs_lp_ability_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_rx_pause; + hw_dbg("Flow Control = Rx PAUSE frames only.\n"); + } else { + /* Per the IEEE spec, at this point flow control + * should be disabled. + */ + hw->fc.current_mode = e1000_fc_none; + hw_dbg("Flow Control = NONE.\n"); + } + + /* Now we call a subroutine to actually force the MAC + * controller to use the correct flow control settings. + */ + pcs_ctrl_reg = rd32(E1000_PCS_LCTL); + pcs_ctrl_reg |= E1000_PCS_LCTL_FORCE_FCTRL; + wr32(E1000_PCS_LCTL, pcs_ctrl_reg); + + ret_val = igb_force_mac_fc(hw); + if (ret_val) { + hw_dbg("Error forcing flow control settings\n"); + return ret_val; + } + } out: return ret_val; diff --git a/drivers/net/ethernet/intel/igb/e1000_nvm.c b/drivers/net/ethernet/intel/igb/e1000_nvm.c index 7db3f80bcd5..fbb7604db36 100644 --- a/drivers/net/ethernet/intel/igb/e1000_nvm.c +++ b/drivers/net/ethernet/intel/igb/e1000_nvm.c @@ -438,7 +438,7 @@ out: s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { struct e1000_nvm_info *nvm = &hw->nvm; - s32 ret_val; + s32 ret_val = -E1000_ERR_NVM; u16 widx = 0; /* @@ -448,22 +448,21 @@ s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { hw_dbg("nvm parameter(s) out of bounds\n"); - ret_val = -E1000_ERR_NVM; - goto out; + return ret_val; } - ret_val = hw->nvm.ops.acquire(hw); - if (ret_val) - goto out; - - msleep(10); - while (widx < words) { u8 write_opcode = NVM_WRITE_OPCODE_SPI; - ret_val = igb_ready_nvm_eeprom(hw); + ret_val = nvm->ops.acquire(hw); if (ret_val) - goto release; + return ret_val; + + ret_val = igb_ready_nvm_eeprom(hw); + if (ret_val) { + nvm->ops.release(hw); + return ret_val; + } igb_standby_nvm(hw); @@ -497,13 +496,10 @@ s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) break; } } + usleep_range(1000, 2000); + nvm->ops.release(hw); } - msleep(10); -release: - hw->nvm.ops.release(hw); - -out: return ret_val; } diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index c15a4811b47..17f1686ee41 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -42,6 +42,8 @@ struct igb_adapter; +#define E1000_PCS_CFG_IGN_SD 1 + /* Interrupt defines */ #define IGB_START_ITR 648 /* ~6000 ints/sec */ #define IGB_4K_ITR 980 diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index e2288b5a9ca..bfe9208c4b1 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -1624,6 +1624,20 @@ static int igb_setup_loopback_test(struct igb_adapter *adapter) reg &= ~E1000_CONNSW_ENRGSRC; wr32(E1000_CONNSW, reg); + /* Unset sigdetect for SERDES loopback on + * 82580 and i350 devices. + */ + switch (hw->mac.type) { + case e1000_82580: + case e1000_i350: + reg = rd32(E1000_PCS_CFG0); + reg |= E1000_PCS_CFG_IGN_SD; + wr32(E1000_PCS_CFG0, reg); + break; + default: + break; + } + /* Set PCS register for forced speed */ reg = rd32(E1000_PCS_LCTL); reg &= ~E1000_PCS_LCTL_AN_ENABLE; /* Disable Autoneg*/ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c index efaf9a73cc7..50aa546b8c7 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c @@ -47,23 +47,27 @@ static ssize_t ixgbe_dbg_reg_ops_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos) { struct ixgbe_adapter *adapter = filp->private_data; - char buf[256]; - int bytes_not_copied; + char *buf; int len; /* don't allow partial reads */ if (*ppos != 0) return 0; - len = snprintf(buf, sizeof(buf), "%s: %s\n", - adapter->netdev->name, ixgbe_dbg_reg_ops_buf); - if (count < len) + buf = kasprintf(GFP_KERNEL, "%s: %s\n", + adapter->netdev->name, + ixgbe_dbg_reg_ops_buf); + if (!buf) + return -ENOMEM; + + if (count < strlen(buf)) { + kfree(buf); return -ENOSPC; - bytes_not_copied = copy_to_user(buffer, buf, len); - if (bytes_not_copied < 0) - return bytes_not_copied; + } + + len = simple_read_from_buffer(buffer, count, ppos, buf, strlen(buf)); - *ppos = len; + kfree(buf); return len; } @@ -79,7 +83,7 @@ static ssize_t ixgbe_dbg_reg_ops_write(struct file *filp, size_t count, loff_t *ppos) { struct ixgbe_adapter *adapter = filp->private_data; - int bytes_not_copied; + int len; /* don't allow partial writes */ if (*ppos != 0) @@ -87,14 +91,15 @@ static ssize_t ixgbe_dbg_reg_ops_write(struct file *filp, if (count >= sizeof(ixgbe_dbg_reg_ops_buf)) return -ENOSPC; - bytes_not_copied = copy_from_user(ixgbe_dbg_reg_ops_buf, buffer, count); - if (bytes_not_copied < 0) - return bytes_not_copied; - else if (bytes_not_copied < count) - count -= bytes_not_copied; - else - return -ENOSPC; - ixgbe_dbg_reg_ops_buf[count] = '\0'; + len = simple_write_to_buffer(ixgbe_dbg_reg_ops_buf, + sizeof(ixgbe_dbg_reg_ops_buf)-1, + ppos, + buffer, + count); + if (len < 0) + return len; + + ixgbe_dbg_reg_ops_buf[len] = '\0'; if (strncmp(ixgbe_dbg_reg_ops_buf, "write", 5) == 0) { u32 reg, value; @@ -147,23 +152,27 @@ static ssize_t ixgbe_dbg_netdev_ops_read(struct file *filp, size_t count, loff_t *ppos) { struct ixgbe_adapter *adapter = filp->private_data; - char buf[256]; - int bytes_not_copied; + char *buf; int len; /* don't allow partial reads */ if (*ppos != 0) return 0; - len = snprintf(buf, sizeof(buf), "%s: %s\n", - adapter->netdev->name, ixgbe_dbg_netdev_ops_buf); - if (count < len) + buf = kasprintf(GFP_KERNEL, "%s: %s\n", + adapter->netdev->name, + ixgbe_dbg_netdev_ops_buf); + if (!buf) + return -ENOMEM; + + if (count < strlen(buf)) { + kfree(buf); return -ENOSPC; - bytes_not_copied = copy_to_user(buffer, buf, len); - if (bytes_not_copied < 0) - return bytes_not_copied; + } + + len = simple_read_from_buffer(buffer, count, ppos, buf, strlen(buf)); - *ppos = len; + kfree(buf); return len; } @@ -179,7 +188,7 @@ static ssize_t ixgbe_dbg_netdev_ops_write(struct file *filp, size_t count, loff_t *ppos) { struct ixgbe_adapter *adapter = filp->private_data; - int bytes_not_copied; + int len; /* don't allow partial writes */ if (*ppos != 0) @@ -187,15 +196,15 @@ static ssize_t ixgbe_dbg_netdev_ops_write(struct file *filp, if (count >= sizeof(ixgbe_dbg_netdev_ops_buf)) return -ENOSPC; - bytes_not_copied = copy_from_user(ixgbe_dbg_netdev_ops_buf, - buffer, count); - if (bytes_not_copied < 0) - return bytes_not_copied; - else if (bytes_not_copied < count) - count -= bytes_not_copied; - else - return -ENOSPC; - ixgbe_dbg_netdev_ops_buf[count] = '\0'; + len = simple_write_to_buffer(ixgbe_dbg_netdev_ops_buf, + sizeof(ixgbe_dbg_netdev_ops_buf)-1, + ppos, + buffer, + count); + if (len < 0) + return len; + + ixgbe_dbg_netdev_ops_buf[len] = '\0'; if (strncmp(ixgbe_dbg_netdev_ops_buf, "tx_timeout", 10) == 0) { adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 484bbedffe2..79b83458318 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1338,26 +1338,29 @@ static unsigned int ixgbe_get_headlen(unsigned char *data, if (hlen < sizeof(struct iphdr)) return hdr.network - data; - /* record next protocol */ - nexthdr = hdr.ipv4->protocol; - hdr.network += hlen; + /* record next protocol if header is present */ + if (!hdr.ipv4->frag_off) + nexthdr = hdr.ipv4->protocol; } else if (protocol == __constant_htons(ETH_P_IPV6)) { if ((hdr.network - data) > (max_len - sizeof(struct ipv6hdr))) return max_len; /* record next protocol */ nexthdr = hdr.ipv6->nexthdr; - hdr.network += sizeof(struct ipv6hdr); + hlen = sizeof(struct ipv6hdr); #ifdef IXGBE_FCOE } else if (protocol == __constant_htons(ETH_P_FCOE)) { if ((hdr.network - data) > (max_len - FCOE_HEADER_LEN)) return max_len; - hdr.network += FCOE_HEADER_LEN; + hlen = FCOE_HEADER_LEN; #endif } else { return hdr.network - data; } + /* relocate pointer to start of L4 header */ + hdr.network += hlen; + /* finally sort out TCP/UDP */ if (nexthdr == IPPROTO_TCP) { if ((hdr.network - data) > (max_len - sizeof(struct tcphdr))) |