summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-13 21:39:32 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-13 21:39:32 +0200
commitbaf08f0be6d986521bb2fbdc7af51fc4847da734 (patch)
tree5ac765703ad79edeafc6eec39fe42850bd6b5dc6 /drivers
parentaa5d2de7b080873f6d9ac3aede423c9713bf0caa (diff)
ide: make ide_transfer_pc() static
* Move ->ticks field from struct ide_floppy_obj to ide_drive_t. * Move idefloppy_transfer_pc() to ide-atapi.c and make ide_transfer_pc() use it. * Always use ide_transfer_pc as a handler in ide_issue_pc(). * Remove no longer used idefloppy_start_pc_transfer(), ide*_transfer_pc() and 'handler' argument from ide_issue_pc(). * Make ide_transfer_pc() static. While at it: * idefloppy_transfer_pc() -> ide_delayed_transfer_pc() * IDEFLOPPY_TICKS_DELAY -> IDEFLOPPY_PC_DELAY * ->ticks -> ->pc_delay There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ide/ide-atapi.c41
-rw-r--r--drivers/ide/ide-floppy.c72
-rw-r--r--drivers/ide/ide-floppy.h3
-rw-r--r--drivers/ide/ide-tape.c6
-rw-r--r--drivers/scsi/ide-scsi.c9
5 files changed, 45 insertions, 86 deletions
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index b558663418d..2521677e1f4 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -468,12 +468,22 @@ static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
return ireason;
}
-ide_startstop_t ide_transfer_pc(ide_drive_t *drive, unsigned int timeout,
- ide_expiry_t *expiry)
+static int ide_delayed_transfer_pc(ide_drive_t *drive)
+{
+ /* Send the actual packet */
+ drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12);
+
+ /* Timeout for the packet command */
+ return WAIT_FLOPPY_CMD;
+}
+
+static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
{
struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->hwgroup->rq;
+ ide_expiry_t *expiry;
+ unsigned int timeout;
ide_startstop_t startstop;
u8 ireason;
@@ -493,6 +503,25 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, unsigned int timeout,
return ide_do_reset(drive);
}
+ /*
+ * If necessary schedule the packet transfer to occur 'timeout'
+ * miliseconds later in ide_delayed_transfer_pc() after the device
+ * says it's ready for a packet.
+ */
+ if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
+ timeout = drive->pc_delay;
+ expiry = &ide_delayed_transfer_pc;
+ } else {
+ if (drive->scsi) {
+ timeout = ide_scsi_get_timeout(pc);
+ expiry = ide_scsi_expiry;
+ } else {
+ timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
+ : WAIT_TAPE_CMD;
+ expiry = NULL;
+ }
+ }
+
/* Set the interrupt routine */
ide_set_handler(drive, ide_pc_intr, timeout, expiry);
@@ -508,10 +537,8 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, unsigned int timeout,
return ide_started;
}
-EXPORT_SYMBOL_GPL(ide_transfer_pc);
-ide_startstop_t ide_issue_pc(ide_drive_t *drive,
- ide_handler_t *handler, unsigned int timeout,
+ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
ide_expiry_t *expiry)
{
struct ide_atapi_pc *pc = drive->pc;
@@ -550,12 +577,12 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive,
/* Issue the packet command */
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
- ide_execute_command(drive, ATA_CMD_PACKET, handler,
+ ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
timeout, NULL);
return ide_started;
} else {
ide_execute_pkt_cmd(drive);
- return (*handler)(drive);
+ return ide_transfer_pc(drive);
}
}
EXPORT_SYMBOL_GPL(ide_issue_pc);
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 7be3cd5daa9..2a34f1ad228 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -73,7 +73,11 @@
#define CAPACITY_CURRENT 0x02
#define CAPACITY_NO_CARTRIDGE 0x03
-#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
+/*
+ * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
+ * was apparently being deasserted before the unit was ready to receive data.
+ */
+#define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */
/* Error code returned in rq->errors to the higher part of the driver. */
#define IDEFLOPPY_ERROR_GENERAL 101
@@ -193,51 +197,6 @@ static void ide_floppy_callback(ide_drive_t *drive, int dsc)
idefloppy_end_request(drive, uptodate, 0);
}
-/*
- * What we have here is a classic case of a top half / bottom half interrupt
- * service routine. In interrupt mode, the device sends an interrupt to signal
- * that it is ready to receive a packet. However, we need to delay about 2-3
- * ticks before issuing the packet or we gets in trouble.
- */
-static int idefloppy_transfer_pc(ide_drive_t *drive)
-{
- /* Send the actual packet */
- drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12);
-
- /* Timeout for the packet command */
- return WAIT_FLOPPY_CMD;
-}
-
-/*
- * Called as an interrupt (or directly). When the device says it's ready for a
- * packet, we schedule the packet transfer to occur about 2-3 ticks later in
- * transfer_pc.
- */
-static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- ide_expiry_t *expiry;
- unsigned int timeout;
-
- /*
- * The following delay solves a problem with ATAPI Zip 100 drives
- * where the Busy flag was apparently being deasserted before the
- * unit was ready to receive data. This was happening on a
- * 1200 MHz Athlon system. 10/26/01 25msec is too short,
- * 40 and 50msec work well. ide_pc_intr will not be actually
- * used until after the packet is moved in about 50 msec.
- */
- if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
- timeout = floppy->ticks;
- expiry = &idefloppy_transfer_pc;
- } else {
- timeout = WAIT_FLOPPY_CMD;
- expiry = NULL;
- }
-
- return ide_transfer_pc(drive, timeout, expiry);
-}
-
static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
struct ide_atapi_pc *pc)
{
@@ -281,8 +240,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->retries++;
- return ide_issue_pc(drive, idefloppy_start_pc_transfer,
- WAIT_FLOPPY_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
}
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
@@ -597,21 +555,7 @@ static sector_t idefloppy_capacity(ide_drive_t *drive)
ide_devset_rw_field(bios_cyl, bios_cyl);
ide_devset_rw_field(bios_head, bios_head);
ide_devset_rw_field(bios_sect, bios_sect);
-
-static int get_ticks(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- return floppy->ticks;
-}
-
-static int set_ticks(ide_drive_t *drive, int arg)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- floppy->ticks = arg;
- return 0;
-}
-
-IDE_DEVSET(ticks, DS_SYNC, get_ticks, set_ticks);
+ide_devset_rw_field(ticks, pc_delay);
static const struct ide_proc_devset idefloppy_settings[] = {
IDE_PROC_DEVSET(bios_cyl, 0, 1023),
@@ -647,7 +591,7 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) {
drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
/* This value will be visible in the /proc/ide/hdx/settings */
- floppy->ticks = IDEFLOPPY_TICKS_DELAY;
+ drive->pc_delay = IDEFLOPPY_PC_DELAY;
blk_queue_max_sectors(drive->queue, 64);
}
diff --git a/drivers/ide/ide-floppy.h b/drivers/ide/ide-floppy.h
index ced5ceb474d..00ad5f992dc 100644
--- a/drivers/ide/ide-floppy.h
+++ b/drivers/ide/ide-floppy.h
@@ -20,8 +20,7 @@ typedef struct ide_floppy_obj {
/* Last error information */
u8 sense_key, asc, ascq;
- /* delay this long before sending packet command */
- u8 ticks;
+
int progress_indication;
/* Device information */
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index a148de623af..622d5fed2dc 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -654,10 +654,6 @@ static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
* again, the callback function will be called and then we will handle the next
* request.
*/
-static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
-{
- return ide_transfer_pc(drive, WAIT_TAPE_CMD, NULL);
-}
static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
struct ide_atapi_pc *pc)
@@ -705,7 +701,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
pc->retries++;
- return ide_issue_pc(drive, idetape_transfer_pc, WAIT_TAPE_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
}
/* A mode sense command is used to "sense" tape parameters. */
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 8733fe34925..7d3d03f9891 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -270,12 +270,6 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
return 0;
}
-static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive)
-{
- return ide_transfer_pc(drive, ide_scsi_get_timeout(drive->pc),
- ide_scsi_expiry);
-}
-
static inline int idescsi_set_direction(struct ide_atapi_pc *pc)
{
switch (pc->c[0]) {
@@ -321,8 +315,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
/* Set the current packet command */
drive->pc = pc;
- return ide_issue_pc(drive, idescsi_transfer_pc,
- ide_scsi_get_timeout(pc), ide_scsi_expiry);
+ return ide_issue_pc(drive, ide_scsi_get_timeout(pc), ide_scsi_expiry);
}
/*