drm/nouveau: use dcb connector types throughout the driver

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

1 files changed, 41 insertions, 32 deletions

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 9d118737f88..dee52c81b10 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -218,7 +218,7 @@ nouveau_connector_set_encoder(struct drm_connector *connector,
 			connector->interlace_allowed = true;
 	}
 
-	if (connector->connector_type == DRM_MODE_CONNECTOR_DVII) {
+	if (nv_connector->dcb->type == DCB_CONNECTOR_DVI_I) {
 		drm_connector_property_set_value(connector,
 			dev->mode_config.dvi_i_subconnector_property,
 			nv_encoder->dcb->type == OUTPUT_TMDS ?
@@ -236,7 +236,7 @@ nouveau_connector_detect(struct drm_connector *connector)
 	struct nouveau_i2c_chan *i2c;
 	int type, flags;
 
-	if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
+	if (nv_connector->dcb->type == DCB_CONNECTOR_LVDS)
 		nv_encoder = find_encoder_by_type(connector, OUTPUT_LVDS);
 	if (nv_encoder && nv_connector->native_mode) {
 #ifdef CONFIG_ACPI
@@ -279,7 +279,7 @@ nouveau_connector_detect(struct drm_connector *connector)
 		 * same i2c channel so the value returned from ddc_detect
 		 * isn't necessarily correct.
 		 */
-		if (connector->connector_type == DRM_MODE_CONNECTOR_DVII) {
+		if (nv_connector->dcb->type == DCB_CONNECTOR_DVI_I) {
 			if (nv_connector->edid->input & DRM_EDID_INPUT_DIGITAL)
 				type = OUTPUT_TMDS;
 			else
@@ -321,11 +321,11 @@ detect_analog:
 static void
 nouveau_connector_force(struct drm_connector *connector)
 {
-	struct drm_device *dev = connector->dev;
+	struct nouveau_connector *nv_connector = nouveau_connector(connector);
 	struct nouveau_encoder *nv_encoder;
 	int type;
 
-	if (connector->connector_type == DRM_MODE_CONNECTOR_DVII) {
+	if (nv_connector->dcb->type == DCB_CONNECTOR_DVI_I) {
 		if (connector->force == DRM_FORCE_ON_DIGITAL)
 			type = OUTPUT_TMDS;
 		else
@@ -335,7 +335,7 @@ nouveau_connector_force(struct drm_connector *connector)
 
 	nv_encoder = find_encoder_by_type(connector, type);
 	if (!nv_encoder) {
-		NV_ERROR(dev, "can't find encoder to force %s on!\n",
+		NV_ERROR(connector->dev, "can't find encoder to force %s on!\n",
 			 drm_get_connector_name(connector));
 		connector->status = connector_status_disconnected;
 		return;
@@ -369,7 +369,7 @@ nouveau_connector_set_property(struct drm_connector *connector,
 		}
 
 		/* LVDS always needs gpu scaling */
-		if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS &&
+		if (nv_connector->dcb->type == DCB_CONNECTOR_LVDS &&
 		    value == DRM_MODE_SCALE_NONE)
 			return -EINVAL;
 
@@ -535,7 +535,7 @@ nouveau_connector_get_modes(struct drm_connector *connector)
 	/* If we're not LVDS, destroy the previous native mode, the attached
 	 * monitor could have changed.
 	 */
-	if (connector->connector_type != DRM_MODE_CONNECTOR_LVDS &&
+	if (nv_connector->dcb->type != DCB_CONNECTOR_LVDS &&
 	    nv_connector->native_mode) {
 		drm_mode_destroy(dev, nv_connector->native_mode);
 		nv_connector->native_mode = NULL;
@@ -563,7 +563,7 @@ nouveau_connector_get_modes(struct drm_connector *connector)
 		ret = get_slave_funcs(nv_encoder)->
 			get_modes(to_drm_encoder(nv_encoder), connector);
 
-	if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
+	if (nv_encoder->dcb->type == OUTPUT_LVDS)
 		ret += nouveau_connector_scaler_modes_add(connector);
 
 	return ret;
@@ -771,20 +771,26 @@ nouveau_connector_create(struct drm_device *dev,
 		type = DRM_MODE_CONNECTOR_DVII;
 		break;
 	case DCB_CONNECTOR_DVI_D:
-	case DCB_CONNECTOR_HDMI_0:
-	case DCB_CONNECTOR_HDMI_1:
 		NV_INFO(dev, "Detected a DVI-D connector\n");
 		type = DRM_MODE_CONNECTOR_DVID;
 		break;
+	case DCB_CONNECTOR_HDMI_0:
+	case DCB_CONNECTOR_HDMI_1:
+		NV_INFO(dev, "Detected a HDMI connector\n");
+		type = DRM_MODE_CONNECTOR_HDMIA;
+		break;
 	case DCB_CONNECTOR_LVDS:
 		NV_INFO(dev, "Detected a LVDS connector\n");
 		type = DRM_MODE_CONNECTOR_LVDS;
 		break;
 	case DCB_CONNECTOR_DP:
-	case DCB_CONNECTOR_eDP:
 		NV_INFO(dev, "Detected a DisplayPort connector\n");
 		type = DRM_MODE_CONNECTOR_DisplayPort;
 		break;
+	case DCB_CONNECTOR_eDP:
+		NV_INFO(dev, "Detected an eDP connector\n");
+		type = DRM_MODE_CONNECTOR_eDP;
+		break;
 	default:
 		NV_ERROR(dev, "unknown connector type: 0x%02x!!\n", dcb->type);
 		return -EINVAL;
@@ -824,41 +830,44 @@ nouveau_connector_create(struct drm_device *dev,
 	}
 
 	/* Init DVI-I specific properties */
-	if (type == DRM_MODE_CONNECTOR_DVII) {
+	if (dcb->type == DCB_CONNECTOR_DVI_I) {
 		drm_mode_create_dvi_i_properties(dev);
 		drm_connector_attach_property(connector, dev->mode_config.dvi_i_subconnector_property, 0);
 		drm_connector_attach_property(connector, dev->mode_config.dvi_i_select_subconnector_property, 0);
 	}
 
-	if (type != DRM_MODE_CONNECTOR_LVDS)
+	if (dcb->type != DCB_CONNECTOR_LVDS)
 		nv_connector->use_dithering = false;
 
-	if (type == DRM_MODE_CONNECTOR_DVID ||
-	    type == DRM_MODE_CONNECTOR_DVII ||
-	    type == DRM_MODE_CONNECTOR_LVDS ||
-	    type == DRM_MODE_CONNECTOR_DisplayPort) {
-		nv_connector->scaling_mode = DRM_MODE_SCALE_FULLSCREEN;
-
-		drm_connector_attach_property(connector, dev->mode_config.scaling_mode_property,
-					      nv_connector->scaling_mode);
-		drm_connector_attach_property(connector, dev->mode_config.dithering_mode_property,
-					      nv_connector->use_dithering ? DRM_MODE_DITHERING_ON
-					      : DRM_MODE_DITHERING_OFF);
-
-	} else {
-		nv_connector->scaling_mode = DRM_MODE_SCALE_NONE;
-
-		if (type == DRM_MODE_CONNECTOR_VGA  &&
-				dev_priv->card_type >= NV_50) {
+	switch (dcb->type) {
+	case DCB_CONNECTOR_VGA:
+		if (dev_priv->card_type >= NV_50) {
 			drm_connector_attach_property(connector,
 					dev->mode_config.scaling_mode_property,
 					nv_connector->scaling_mode);
 		}
+		/* fall-through */
+	case DCB_CONNECTOR_TV_0:
+	case DCB_CONNECTOR_TV_1:
+	case DCB_CONNECTOR_TV_3:
+		nv_connector->scaling_mode = DRM_MODE_SCALE_NONE;
+		break;
+	default:
+		nv_connector->scaling_mode = DRM_MODE_SCALE_FULLSCREEN;
+
+		drm_connector_attach_property(connector,
+				dev->mode_config.scaling_mode_property,
+				nv_connector->scaling_mode);
+		drm_connector_attach_property(connector,
+				dev->mode_config.dithering_mode_property,
+				nv_connector->use_dithering ?
+				DRM_MODE_DITHERING_ON : DRM_MODE_DITHERING_OFF);
+		break;
 	}
 
 	drm_sysfs_connector_add(connector);
 
-	if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS) {
+	if (dcb->type == DCB_CONNECTOR_LVDS) {
 		ret = nouveau_connector_create_lvds(dev, connector);
 		if (ret) {
 			connector->funcs->destroy(connector);