diff options
| author | Michael Chan <mchan@broadcom.com> | 2010-11-24 13:48:55 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2010-11-28 10:47:20 -0800 |
| commit | be7ff1afec25f2700ca85e3956a2cb3a7b74acd5 (patch) | |
| tree | ebdbc8e614e369f42aebda4823d42b9ac890614b /drivers | |
| parent | a5dac108d57072eec4d6745f32c162524509f2cb (diff) | |
bnx2: Remove config access to non-standard registers
In KVM passthrough mode, the driver may not have config access to
non-standard registers. The BNX2_PCICFG_MISC_CONFIG config register
access to setup mailbox swapping can be done using MMIO.
Update version to 2.0.20.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/bnx2.c | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 78f91ef4496..03209a37883 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -56,8 +56,8 @@ #include "bnx2_fw.h" #define DRV_MODULE_NAME "bnx2" -#define DRV_MODULE_VERSION "2.0.18" -#define DRV_MODULE_RELDATE "Oct 7, 2010" +#define DRV_MODULE_VERSION "2.0.20" +#define DRV_MODULE_RELDATE "Nov 24, 2010" #define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-6.0.15.fw" #define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-6.0.15.fw" #define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-6.0.17.fw" @@ -4683,7 +4683,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) val = BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP; - pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG, val); + REG_WR(bp, BNX2_PCICFG_MISC_CONFIG, val); } else { val = BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | @@ -7924,15 +7924,15 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) goto err_out_release; } + bnx2_set_power_state(bp, PCI_D0); + /* Configure byte swap and enable write to the reg_window registers. * Rely on CPU to do target byte swapping on big endian systems * The chip's target access swapping will not swap all accesses */ - pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG, - BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | - BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP); - - bnx2_set_power_state(bp, PCI_D0); + REG_WR(bp, BNX2_PCICFG_MISC_CONFIG, + BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | + BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP); bp->chip_id = REG_RD(bp, BNX2_MISC_ID); |