mwifiex: failure case handling for PCIe events

Event buffers for PCIe interface are allocated during driver
initialisation, and respective physical addresses are sent to FW
in *_PCIE_DESC_DETAILS command so that FW can do DMA. These buffers
will be freed while unloading the driver. Therefore we should not
free them in event handling error path. Also we should skip next
pending events in failure case.

Also fixed 'returning -1 instead of -ENOMEM is sloppy' warnings.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 6 insertions, 14 deletions

diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index a2f32008f9a..405350940a4 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -386,7 +386,7 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter)
 	card->txbd_ring_vbase = kzalloc(card->txbd_ring_size, GFP_KERNEL);
 	if (!card->txbd_ring_vbase) {
 		dev_err(adapter->dev, "Unable to allocate buffer for txbd ring.\n");
-		return -1;
+		return -ENOMEM;
 	}
 	card->txbd_ring_pbase = virt_to_phys(card->txbd_ring_vbase);
 
@@ -476,7 +476,7 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter)
 	if (!card->rxbd_ring_vbase) {
 		dev_err(adapter->dev, "Unable to allocate buffer for "
 				"rxbd_ring.\n");
-		return -1;
+		return -ENOMEM;
 	}
 	card->rxbd_ring_pbase = virt_to_phys(card->rxbd_ring_vbase);
 
@@ -569,7 +569,7 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter)
 	if (!card->evtbd_ring_vbase) {
 		dev_err(adapter->dev, "Unable to allocate buffer. "
 				"Terminating download\n");
-		return -1;
+		return -ENOMEM;
 	}
 	card->evtbd_ring_pbase = virt_to_phys(card->evtbd_ring_vbase);
 
@@ -1231,15 +1231,13 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter,
 	if (rdptr >= MWIFIEX_MAX_EVT_BD) {
 		dev_err(adapter->dev, "event_complete: Invalid rdptr 0x%x\n",
 					rdptr);
-		ret = -EINVAL;
-		goto done;
+		return -EINVAL;
 	}
 
 	/* Read the event ring write pointer set by firmware */
 	if (mwifiex_read_reg(adapter, REG_EVTBD_WRPTR, &wrptr)) {
 		dev_err(adapter->dev, "event_complete: failed to read REG_EVTBD_WRPTR\n");
-		ret = -1;
-		goto done;
+		return -1;
 	}
 
 	if (!card->evt_buf_list[rdptr]) {
@@ -1268,15 +1266,9 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter,
 	/* Write the event ring read pointer in to REG_EVTBD_RDPTR */
 	if (mwifiex_write_reg(adapter, REG_EVTBD_RDPTR, card->evtbd_rdptr)) {
 		dev_err(adapter->dev, "event_complete: failed to read REG_EVTBD_RDPTR\n");
-		ret = -1;
-		goto done;
+		return -1;
 	}
 
-done:
-	/* Free the buffer for failure case */
-	if (ret && skb)
-		dev_kfree_skb_any(skb);
-
 	dev_dbg(adapter->dev, "info: Check Events Again\n");
 	ret = mwifiex_pcie_process_event_ready(adapter);