[PATCH] Make sparc64 use setup-res.c

There were three changes necessary in order to allow
sparc64 to use setup-res.c:

1) Sparc64 roots the PCI I/O and MEM address space using
   parent resources contained in the PCI controller structure.
   I'm actually surprised no other platforms do this, especially
   ones like Alpha and PPC{,64}.  These resources get linked into the
   iomem/ioport tree when PCI controllers are probed.

   So the hierarchy looks like this:

   iomem --|
	   PCI controller 1 MEM space --|
				        device 1
					device 2
					etc.
	   PCI controller 2 MEM space --|
				        ...
   ioport --|
            PCI controller 1 IO space --|
					...
            PCI controller 2 IO space --|
					...

   You get the idea.  The drivers/pci/setup-res.c code allocates
   using plain iomem_space and ioport_space as the root, so that
   wouldn't work with the above setup.

   So I added a pcibios_select_root() that is used to handle this.
   It uses the PCI controller struct's io_space and mem_space on
   sparc64, and io{port,mem}_resource on every other platform to
   keep current behavior.

2) quirk_io_region() is buggy.  It takes in raw BUS view addresses
   and tries to use them as a PCI resource.

   pci_claim_resource() expects the resource to be fully formed when
   it gets called.  The sparc64 implementation would do the translation
   but that's absolutely wrong, because if the same resource gets
   released then re-claimed we'll adjust things twice.

   So I fixed up quirk_io_region() to do the proper pcibios_bus_to_resource()
   conversion before passing it on to pci_claim_resource().

3) I was mistakedly __init'ing the function methods the PCI controller
   drivers provide on sparc64 to implement some parts of these
   routines.  This was, of course, easy to fix.

So we end up with the following, and that nasty SPARC64 makefile
ifdef in drivers/pci/Makefile is finally zapped.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 9 insertions, 9 deletions

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 87cbf2d5f9b..716df015f8d 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -3,13 +3,9 @@
 #
 
 obj-y		+= access.o bus.o probe.o remove.o pci.o quirks.o \
-			pci-driver.o search.o pci-sysfs.o rom.o
+			pci-driver.o search.o pci-sysfs.o rom.o setup-res.o
 obj-$(CONFIG_PROC_FS) += proc.o
 
-ifndef CONFIG_SPARC64
-obj-y += setup-res.o
-endif
-
 obj-$(CONFIG_HOTPLUG) += hotplug.o
 
 # Build the PCI Hotplug drivers if we were asked to
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 140354a2aa7..4f0c1bd3674 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -245,12 +245,19 @@ static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsi
 {
 	region &= ~(size-1);
 	if (region) {
+		struct pci_bus_region bus_region;
 		struct resource *res = dev->resource + nr;
 
 		res->name = pci_name(dev);
 		res->start = region;
 		res->end = region + size - 1;
 		res->flags = IORESOURCE_IO;
+
+		/* Convert from PCI bus to resource space.  */
+		bus_region.start = res->start;
+		bus_region.end = res->end;
+		pcibios_bus_to_resource(dev, res, &bus_region);
+
 		pci_claim_resource(dev, nr);
 	}
 }	
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 362f93337a3..50d6685dcbc 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -97,10 +97,7 @@ pci_claim_resource(struct pci_dev *dev, int resource)
 	char *dtype = resource < PCI_BRIDGE_RESOURCES ? "device" : "bridge";
 	int err;
 
-	if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
+	root = pcibios_select_root(dev, res);
 
 	err = -EINVAL;
 	if (root != NULL)