summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-11 19:11:51 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-11 19:11:51 -0700
commit1ef3e36251e4edc77a48967d015a87ca3c4283ea (patch)
tree2ee6c869d752c13a56ee2259d115210135f5d5de /drivers
parentc634920abaf9c0a93266a57beff6fce9d3852cb2 (diff)
parentbbf275f092b1b2a9bc8a504500ec387f9ddff859 (diff)
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (74 commits) Blackfin serial driver: pending a unique anomaly id, tie the break flood issue to ANOMALY_05000230 blackfin enable arbitary speed serial setting Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT and DEBUG_KERNEL_START Blackfin arch: fix typo in register name Blackfin arch: trim the Blackfin arch MAINTAINERS list Blackfin arch: fix bug libstdc++ calling writev with an iovec containing { NULL, 0 } fails on Blackfin Blackfin arch: Export strcpy - occasionally get module link failures otherwise Blackfin arch: the load address is not safe to point to as a workaround for ANOMALY 05000281 Blackfin arch: show_mem can not be marked as init, since it is called during OOM condition Blackfin arch: flush/inv the correct range when using write back cache and fix bugs find by dmacopy Blackfin arch: update kgdb patch Blackfin arch: Comply with revised Anomaly Workarounds for BF533 05000311 and BF561 05000323 Blackfin arch: Print out debug info, as early as possible Blackfin arch: Enable earlyprintk earlier - so any error after our interrupt tables are set up will print out Blackfin arch: fix endless loop bug when a double fault happens Blackfin arch: Initial patch to add earlyprintk support Blackfin arch: add TWIx_REGBASE and SPIx_REGBASE to specific CPU header files, use the new REGBASE for board platform resources Blackfin arch: modify the insX/outsX and dma_insX/dma_outsX to be compatible with other archs Blackfin arch: add more common defines for output sections Blackfin arch: cleanup IO and DMA_IO API function definitions according to other arches ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/serial/bfin_5xx.c222
1 files changed, 151 insertions, 71 deletions
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 66c92bc36f3..6f475b60986 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -86,10 +86,8 @@ static void bfin_serial_stop_tx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-#ifdef CONFIG_BF54x
while (!(UART_GET_LSR(uart) & TEMT))
continue;
-#endif
#ifdef CONFIG_SERIAL_BFIN_DMA
disable_dma(uart->tx_dma_channel);
@@ -128,8 +126,8 @@ static void bfin_serial_start_tx(struct uart_port *port)
ier = UART_GET_IER(uart);
ier |= ETBEI;
UART_PUT_IER(uart, ier);
- bfin_serial_tx_chars(uart);
#endif
+ bfin_serial_tx_chars(uart);
#endif
}
@@ -139,18 +137,21 @@ static void bfin_serial_start_tx(struct uart_port *port)
static void bfin_serial_stop_rx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT) {
+#endif
#ifdef CONFIG_BF54x
UART_CLEAR_IER(uart, ERBFI);
#else
unsigned short ier;
ier = UART_GET_IER(uart);
-#ifdef CONFIG_KGDB_UART
- if (uart->port.line != CONFIG_KGDB_UART_PORT)
-#endif
ier &= ~ERBFI;
UART_PUT_IER(uart, ier);
#endif
+#ifdef CONFIG_KGDB_UART
+ }
+#endif
}
/*
@@ -173,12 +174,15 @@ void kgdb_put_debug_char(int chr)
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
while (!(UART_GET_LSR(uart) & THRE)) {
- __builtin_bfin_ssync();
+ SSYNC();
}
+
+#ifndef CONFIG_BF54x
UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
- __builtin_bfin_ssync();
+ SSYNC();
+#endif
UART_PUT_CHAR(uart, (unsigned char)chr);
- __builtin_bfin_ssync();
+ SSYNC();
}
int kgdb_get_debug_char(void)
@@ -192,12 +196,14 @@ int kgdb_get_debug_char(void)
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
while(!(UART_GET_LSR(uart) & DR)) {
- __builtin_bfin_ssync();
+ SSYNC();
}
+#ifndef CONFIG_BF54x
UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
- __builtin_bfin_ssync();
+ SSYNC();
+#endif
chr = UART_GET_CHAR(uart);
- __builtin_bfin_ssync();
+ SSYNC();
return chr;
}
@@ -225,12 +231,10 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
{
struct tty_struct *tty = uart->port.info->tty;
unsigned int status, ch, flg;
+ static int in_break = 0;
#ifdef CONFIG_KGDB_UART
struct pt_regs *regs = get_irq_regs();
#endif
-#ifdef BF533_FAMILY
- static int in_break = 0;
-#endif
status = UART_GET_LSR(uart);
ch = UART_GET_CHAR(uart);
@@ -256,29 +260,30 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
}
}
#endif
-
-#ifdef BF533_FAMILY
- /* The BF533 family of processors have a nice misbehavior where
- * they continuously generate characters for a "single" break.
- * We have to basically ignore this flood until the "next" valid
- * character comes across. All other Blackfin families operate
- * properly though.
- */
- if (in_break) {
- if (ch != 0) {
- in_break = 0;
- ch = UART_GET_CHAR(uart);
- if (bfin_revid() < 5)
+
+ if (ANOMALY_05000230) {
+ /* The BF533 family of processors have a nice misbehavior where
+ * they continuously generate characters for a "single" break.
+ * We have to basically ignore this flood until the "next" valid
+ * character comes across. All other Blackfin families operate
+ * properly though.
+ * Note: While Anomaly 05000230 does not directly address this,
+ * the changes that went in for it also fixed this issue.
+ */
+ if (in_break) {
+ if (ch != 0) {
+ in_break = 0;
+ ch = UART_GET_CHAR(uart);
+ if (bfin_revid() < 5)
+ return;
+ } else
return;
- } else
- return;
+ }
}
-#endif
if (status & BI) {
-#ifdef BF533_FAMILY
- in_break = 1;
-#endif
+ if (ANOMALY_05000230)
+ in_break = 1;
uart->port.icount.brk++;
if (uart_handle_break(&uart->port))
goto ignore_char;
@@ -697,17 +702,19 @@ static int bfin_serial_startup(struct uart_port *port)
uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
add_timer(&(uart->rx_dma_timer));
#else
+ if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
+ "BFIN_UART_RX", uart)) {
# ifdef CONFIG_KGDB_UART
- if (uart->port.line != CONFIG_KGDB_UART_PORT && request_irq
-# else
- if (request_irq
+ if (uart->port.line != CONFIG_KGDB_UART_PORT) {
# endif
- (uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
- "BFIN_UART_RX", uart)) {
printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
return -EBUSY;
+# ifdef CONFIG_KGDB_UART
+ }
+# endif
}
+
if (request_irq
(uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
"BFIN_UART_TX", uart)) {
@@ -962,30 +969,6 @@ static void __init bfin_serial_init_ports(void)
}
#ifdef CONFIG_SERIAL_BFIN_CONSOLE
-static void bfin_serial_console_putchar(struct uart_port *port, int ch)
-{
- struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- while (!(UART_GET_LSR(uart) & THRE))
- barrier();
- UART_PUT_CHAR(uart, ch);
- SSYNC();
-}
-
-/*
- * Interrupts are disabled on entering
- */
-static void
-bfin_serial_console_write(struct console *co, const char *s, unsigned int count)
-{
- struct bfin_serial_port *uart = &bfin_serial_ports[co->index];
- int flags = 0;
-
- spin_lock_irqsave(&uart->port.lock, flags);
- uart_console_write(&uart->port, s, count, bfin_serial_console_putchar);
- spin_unlock_irqrestore(&uart->port.lock, flags);
-
-}
-
/*
* If the port was already initialised (eg, by a boot loader),
* try to determine the current setup.
@@ -1038,19 +1021,25 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
}
pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits);
}
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+static struct uart_driver bfin_serial_reg;
static int __init
bfin_serial_console_setup(struct console *co, char *options)
{
struct bfin_serial_port *uart;
+# ifdef CONFIG_SERIAL_BFIN_CONSOLE
int baud = 57600;
int bits = 8;
int parity = 'n';
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+# ifdef CONFIG_SERIAL_BFIN_CTSRTS
int flow = 'r';
-#else
+# else
int flow = 'n';
-#endif
+# endif
+# endif
/*
* Check whether an invalid uart number has been specified, and
@@ -1061,15 +1050,45 @@ bfin_serial_console_setup(struct console *co, char *options)
co->index = 0;
uart = &bfin_serial_ports[co->index];
+# ifdef CONFIG_SERIAL_BFIN_CONSOLE
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
bfin_serial_console_get_options(uart, &baud, &parity, &bits);
return uart_set_options(&uart->port, co, baud, parity, bits, flow);
+# else
+ return 0;
+# endif
+}
+#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) ||
+ defined (CONFIG_EARLY_PRINTK) */
+
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+static void bfin_serial_console_putchar(struct uart_port *port, int ch)
+{
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+ while (!(UART_GET_LSR(uart) & THRE))
+ barrier();
+ UART_PUT_CHAR(uart, ch);
+ SSYNC();
+}
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+bfin_serial_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct bfin_serial_port *uart = &bfin_serial_ports[co->index];
+ int flags = 0;
+
+ spin_lock_irqsave(&uart->port.lock, flags);
+ uart_console_write(&uart->port, s, count, bfin_serial_console_putchar);
+ spin_unlock_irqrestore(&uart->port.lock, flags);
+
}
-static struct uart_driver bfin_serial_reg;
static struct console bfin_serial_console = {
.name = BFIN_SERIAL_NAME,
.write = bfin_serial_console_write,
@@ -1095,7 +1114,64 @@ console_initcall(bfin_serial_rs_console_init);
#define BFIN_SERIAL_CONSOLE &bfin_serial_console
#else
#define BFIN_SERIAL_CONSOLE NULL
-#endif
+#endif /* CONFIG_SERIAL_BFIN_CONSOLE */
+
+
+#ifdef CONFIG_EARLY_PRINTK
+static __init void early_serial_putc(struct uart_port *port, int ch)
+{
+ unsigned timeout = 0xffff;
+ struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+
+ while ((!(UART_GET_LSR(uart) & THRE)) && --timeout)
+ cpu_relax();
+ UART_PUT_CHAR(uart, ch);
+}
+
+static __init void early_serial_write(struct console *con, const char *s,
+ unsigned int n)
+{
+ struct bfin_serial_port *uart = &bfin_serial_ports[con->index];
+ unsigned int i;
+
+ for (i = 0; i < n; i++, s++) {
+ if (*s == '\n')
+ early_serial_putc(&uart->port, '\r');
+ early_serial_putc(&uart->port, *s);
+ }
+}
+
+static struct __init console bfin_early_serial_console = {
+ .name = "early_BFuart",
+ .write = early_serial_write,
+ .device = uart_console_device,
+ .flags = CON_PRINTBUFFER,
+ .setup = bfin_serial_console_setup,
+ .index = -1,
+ .data = &bfin_serial_reg,
+};
+
+struct console __init *bfin_earlyserial_init(unsigned int port,
+ unsigned int cflag)
+{
+ struct bfin_serial_port *uart;
+ struct ktermios t;
+
+ if (port == -1 || port >= nr_ports)
+ port = 0;
+ bfin_serial_init_ports();
+ bfin_early_serial_console.index = port;
+ uart = &bfin_serial_ports[port];
+ t.c_cflag = cflag;
+ t.c_iflag = 0;
+ t.c_oflag = 0;
+ t.c_lflag = ICANON;
+ t.c_line = port;
+ bfin_serial_set_termios(&uart->port, &t, &t);
+ return &bfin_early_serial_console;
+}
+
+#endif /* CONFIG_SERIAL_BFIN_CONSOLE */
static struct uart_driver bfin_serial_reg = {
.owner = THIS_MODULE,
@@ -1182,7 +1258,7 @@ static int __init bfin_serial_init(void)
int ret;
#ifdef CONFIG_KGDB_UART
struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
- struct termios t;
+ struct ktermios t;
#endif
pr_info("Serial: Blackfin serial driver\n");
@@ -1199,11 +1275,15 @@ static int __init bfin_serial_init(void)
}
#ifdef CONFIG_KGDB_UART
if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) {
- request_irq(uart->port.irq, bfin_serial_int,
+ request_irq(uart->port.irq, bfin_serial_rx_int,
IRQF_DISABLED, "BFIN_UART_RX", uart);
pr_info("Request irq for kgdb uart port\n");
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ERBFI);
+#else
UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
- __builtin_bfin_ssync();
+#endif
+ SSYNC();
t.c_cflag = CS8|B57600;
t.c_iflag = 0;
t.c_oflag = 0;