omap2/3/4: Introducing 'gpmc-nand.c' for GPMC specific NAND init

Introducing 'gpmc-nand.c' for GPMC specific NAND init.
For example: GPMC timing parameters and all.
This patch also migrates gpmc related calls from 'nand/omap2.c'
to 'gpmc-nand.c'.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 4 insertions, 31 deletions

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 1bb799f0125..26aec008018 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -30,12 +30,8 @@
 
 #define	DRIVER_NAME	"omap2-nand"
 
-/* size (4 KiB) for IO mapping */
-#define	NAND_IO_SIZE	SZ_4K
-
 #define	NAND_WP_OFF	0
 #define NAND_WP_BIT	0x00000010
-#define WR_RD_PIN_MONITORING	0x00600000
 
 #define	GPMC_BUF_FULL	0x00000001
 #define	GPMC_BUF_EMPTY	0x00000000
@@ -882,8 +878,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	struct omap_nand_info		*info;
 	struct omap_nand_platform_data	*pdata;
 	int				err;
-	unsigned long 			val;
-
 
 	pdata = pdev->dev.platform_data;
 	if (pdata == NULL) {
@@ -905,28 +899,14 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	info->gpmc_cs		= pdata->cs;
 	info->gpmc_baseaddr	= pdata->gpmc_baseaddr;
 	info->gpmc_cs_baseaddr	= pdata->gpmc_cs_baseaddr;
+	info->phys_base		= pdata->phys_base;
 
 	info->mtd.priv		= &info->nand;
 	info->mtd.name		= dev_name(&pdev->dev);
 	info->mtd.owner		= THIS_MODULE;
 
-	err = gpmc_cs_request(info->gpmc_cs, NAND_IO_SIZE, &info->phys_base);
-	if (err < 0) {
-		dev_err(&pdev->dev, "Cannot request GPMC CS\n");
-		goto out_free_info;
-	}
-
-	/* Enable RD PIN Monitoring Reg */
-	if (pdata->dev_ready) {
-		val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1);
-		val |= WR_RD_PIN_MONITORING;
-		gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val);
-	}
-
-	val  = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG7);
-	val &= ~(0xf << 8);
-	val |=  (0xc & 0xf) << 8;
-	gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG7, val);
+	info->nand.options	|= pdata->devsize ? NAND_BUSWIDTH_16 : 0;
+	info->nand.options	|= NAND_SKIP_BBTSCAN;
 
 	/* NAND write protect off */
 	omap_nand_wp(&info->mtd, NAND_WP_OFF);
@@ -934,7 +914,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
 				pdev->dev.driver->name)) {
 		err = -EBUSY;
-		goto out_free_cs;
+		goto out_free_info;
 	}
 
 	info->nand.IO_ADDR_R = ioremap(info->phys_base, NAND_IO_SIZE);
@@ -963,11 +943,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 		info->nand.chip_delay = 50;
 	}
 
-	info->nand.options  |= NAND_SKIP_BBTSCAN;
-	if ((gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1) & 0x3000)
-								== 0x1000)
-		info->nand.options  |= NAND_BUSWIDTH_16;
-
 	if (use_prefetch) {
 		/* copy the virtual address of nand base for fifo access */
 		info->nand_pref_fifo_add = info->nand.IO_ADDR_R;
@@ -1043,8 +1018,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 
 out_release_mem_region:
 	release_mem_region(info->phys_base, NAND_IO_SIZE);
-out_free_cs:
-	gpmc_cs_free(info->gpmc_cs);
 out_free_info:
 	kfree(info);