gpio: delete AB8500 driver

The AB8500 GPIO driver has been marked BROKEN for ages, and we
have something better in store: a shiny new pinctrl driver. So
let use delete this old driver as the first step.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

3 files changed, 0 insertions, 527 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 682de754d63..e5116fa8514 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -657,12 +657,6 @@ config GPIO_JANZ_TTL
 	  This driver provides support for driving the pins in output
 	  mode only. Input mode is not supported.
 
-config GPIO_AB8500
-	bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions"
-	depends on AB8500_CORE && BROKEN
-	help
-	  Select this to enable the AB8500 IC GPIO driver
-
 config GPIO_TPS6586X
 	bool "TPS6586X GPIO"
 	depends on MFD_TPS6586X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index c5aebd008dd..45a388c21d0 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_GPIO_ACPI)		+= gpiolib-acpi.o
 obj-$(CONFIG_GPIO_GENERIC)	+= gpio-generic.o
 
 obj-$(CONFIG_GPIO_74X164)	+= gpio-74x164.o
-obj-$(CONFIG_GPIO_AB8500)	+= gpio-ab8500.o
 obj-$(CONFIG_GPIO_ADNP)		+= gpio-adnp.o
 obj-$(CONFIG_GPIO_ADP5520)	+= gpio-adp5520.o
 obj-$(CONFIG_GPIO_ADP5588)	+= gpio-adp5588.o
diff --git a/drivers/gpio/gpio-ab8500.c b/drivers/gpio/gpio-ab8500.c
deleted file mode 100644
index 983ad425f0a..00000000000
--- a/drivers/gpio/gpio-ab8500.c
+++ /dev/null
@@ -1,520 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: BIBEK BASU <bibek.basu@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/ab8500.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500/gpio.h>
-
-/*
- * GPIO registers offset
- * Bank: 0x10
- */
-#define AB8500_GPIO_SEL1_REG	0x00
-#define AB8500_GPIO_SEL2_REG	0x01
-#define AB8500_GPIO_SEL3_REG	0x02
-#define AB8500_GPIO_SEL4_REG	0x03
-#define AB8500_GPIO_SEL5_REG	0x04
-#define AB8500_GPIO_SEL6_REG	0x05
-
-#define AB8500_GPIO_DIR1_REG	0x10
-#define AB8500_GPIO_DIR2_REG	0x11
-#define AB8500_GPIO_DIR3_REG	0x12
-#define AB8500_GPIO_DIR4_REG	0x13
-#define AB8500_GPIO_DIR5_REG	0x14
-#define AB8500_GPIO_DIR6_REG	0x15
-
-#define AB8500_GPIO_OUT1_REG	0x20
-#define AB8500_GPIO_OUT2_REG	0x21
-#define AB8500_GPIO_OUT3_REG	0x22
-#define AB8500_GPIO_OUT4_REG	0x23
-#define AB8500_GPIO_OUT5_REG	0x24
-#define AB8500_GPIO_OUT6_REG	0x25
-
-#define AB8500_GPIO_PUD1_REG	0x30
-#define AB8500_GPIO_PUD2_REG	0x31
-#define AB8500_GPIO_PUD3_REG	0x32
-#define AB8500_GPIO_PUD4_REG	0x33
-#define AB8500_GPIO_PUD5_REG	0x34
-#define AB8500_GPIO_PUD6_REG	0x35
-
-#define AB8500_GPIO_IN1_REG	0x40
-#define AB8500_GPIO_IN2_REG	0x41
-#define AB8500_GPIO_IN3_REG	0x42
-#define AB8500_GPIO_IN4_REG	0x43
-#define AB8500_GPIO_IN5_REG	0x44
-#define AB8500_GPIO_IN6_REG	0x45
-#define AB8500_GPIO_ALTFUN_REG	0x45
-#define ALTFUN_REG_INDEX	6
-#define AB8500_NUM_GPIO		42
-#define AB8500_NUM_VIR_GPIO_IRQ	16
-
-enum ab8500_gpio_action {
-	NONE,
-	STARTUP,
-	SHUTDOWN,
-	MASK,
-	UNMASK
-};
-
-struct ab8500_gpio {
-	struct gpio_chip chip;
-	struct ab8500 *parent;
-	struct device *dev;
-	struct mutex lock;
-	u32 irq_base;
-	enum ab8500_gpio_action irq_action;
-	u16 rising;
-	u16 falling;
-};
-/**
- * to_ab8500_gpio() - get the pointer to ab8500_gpio
- * @chip:	Member of the structure ab8500_gpio
- */
-static inline struct ab8500_gpio *to_ab8500_gpio(struct gpio_chip *chip)
-{
-	return container_of(chip, struct ab8500_gpio, chip);
-}
-
-static int ab8500_gpio_set_bits(struct gpio_chip *chip, u8 reg,
-					unsigned offset, int val)
-{
-	struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip);
-	u8 pos = offset % 8;
-	int ret;
-
-	reg = reg + (offset / 8);
-	ret = abx500_mask_and_set_register_interruptible(ab8500_gpio->dev,
-				AB8500_MISC, reg, 1 << pos, val << pos);
-	if (ret < 0)
-		dev_err(ab8500_gpio->dev, "%s write failed\n", __func__);
-	return ret;
-}
-/**
- * ab8500_gpio_get() - Get the particular GPIO value
- * @chip: Gpio device
- * @offset: GPIO number to read
- */
-static int ab8500_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip);
-	u8 mask = 1 << (offset % 8);
-	u8 reg = AB8500_GPIO_OUT1_REG + (offset / 8);
-	int ret;
-	u8 data;
-	ret = abx500_get_register_interruptible(ab8500_gpio->dev, AB8500_MISC,
-						reg, &data);
-	if (ret < 0) {
-		dev_err(ab8500_gpio->dev, "%s read failed\n", __func__);
-		return ret;
-	}
-	return (data & mask) >> (offset % 8);
-}
-
-static void ab8500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
-{
-	struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip);
-	int ret;
-	/* Write the data */
-	ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, 1);
-	if (ret < 0)
-		dev_err(ab8500_gpio->dev, "%s write failed\n", __func__);
-}
-
-static int ab8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
-					int val)
-{
-	int ret;
-	/* set direction as output */
-	ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1);
-	if (ret < 0)
-		return ret;
-	/* disable pull down */
-	ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1);
-	if (ret < 0)
-		return ret;
-	/* set the output as 1 or 0 */
-	return ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
-
-}
-
-static int ab8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	/* set the register as input */
-	return ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0);
-}
-
-static int ab8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	/*
-	 * Only some GPIOs are interrupt capable, and they are
-	 * organized in discontiguous clusters:
-	 *
-	 *	GPIO6 to GPIO13
-	 *	GPIO24 and GPIO25
-	 *	GPIO36 to GPIO41
-	 */
-	static struct ab8500_gpio_irq_cluster {
-		int start;
-		int end;
-	} clusters[] = {
-		{.start = 6,  .end = 13},
-		{.start = 24, .end = 25},
-		{.start = 36, .end = 41},
-	};
-	struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip);
-	int base = ab8500_gpio->irq_base;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(clusters); i++) {
-		struct ab8500_gpio_irq_cluster *cluster = &clusters[i];
-
-		if (offset >= cluster->start && offset <= cluster->end)
-			return base + offset - cluster->start;
-
-		/* Advance by the number of gpios in this cluster */
-		base += cluster->end - cluster->start + 1;
-	}
-
-	return -EINVAL;
-}
-
-static struct gpio_chip ab8500gpio_chip = {
-	.label			= "ab8500_gpio",
-	.owner			= THIS_MODULE,
-	.direction_input	= ab8500_gpio_direction_input,
-	.get			= ab8500_gpio_get,
-	.direction_output	= ab8500_gpio_direction_output,
-	.set			= ab8500_gpio_set,
-	.to_irq			= ab8500_gpio_to_irq,
-};
-
-static unsigned int irq_to_rising(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	int offset = irq - ab8500_gpio->irq_base;
-	int new_irq = offset +  AB8500_INT_GPIO6R
-			+ ab8500_gpio->parent->irq_base;
-	return new_irq;
-}
-
-static unsigned int irq_to_falling(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	int offset = irq - ab8500_gpio->irq_base;
-	int new_irq = offset +  AB8500_INT_GPIO6F
-			+  ab8500_gpio->parent->irq_base;
-	return new_irq;
-
-}
-
-static unsigned int rising_to_irq(unsigned int irq, void *dev)
-{
-	struct ab8500_gpio *ab8500_gpio = dev;
-	int offset = irq - AB8500_INT_GPIO6R
-			- ab8500_gpio->parent->irq_base ;
-	int new_irq = offset + ab8500_gpio->irq_base;
-	return new_irq;
-}
-
-static unsigned int falling_to_irq(unsigned int irq, void *dev)
-{
-	struct ab8500_gpio *ab8500_gpio = dev;
-	int offset = irq - AB8500_INT_GPIO6F
-			- ab8500_gpio->parent->irq_base ;
-	int new_irq = offset + ab8500_gpio->irq_base;
-	return new_irq;
-
-}
-
-/*
- * IRQ handler
- */
-
-static irqreturn_t handle_rising(int irq, void *dev)
-{
-
-	handle_nested_irq(rising_to_irq(irq , dev));
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t handle_falling(int irq, void *dev)
-{
-
-	handle_nested_irq(falling_to_irq(irq, dev));
-	return IRQ_HANDLED;
-}
-
-static void ab8500_gpio_irq_lock(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	mutex_lock(&ab8500_gpio->lock);
-}
-
-static void ab8500_gpio_irq_sync_unlock(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	int offset = irq - ab8500_gpio->irq_base;
-	bool rising = ab8500_gpio->rising & BIT(offset);
-	bool falling = ab8500_gpio->falling & BIT(offset);
-	int ret;
-
-	switch (ab8500_gpio->irq_action)	{
-	case STARTUP:
-		if (rising)
-			ret = request_threaded_irq(irq_to_rising(irq),
-					NULL, handle_rising,
-					IRQF_TRIGGER_RISING,
-					"ab8500-gpio-r", ab8500_gpio);
-		if (falling)
-			ret = request_threaded_irq(irq_to_falling(irq),
-				       NULL, handle_falling,
-				       IRQF_TRIGGER_FALLING,
-				       "ab8500-gpio-f", ab8500_gpio);
-		break;
-	case SHUTDOWN:
-		if (rising)
-			free_irq(irq_to_rising(irq), ab8500_gpio);
-		if (falling)
-			free_irq(irq_to_falling(irq), ab8500_gpio);
-		break;
-	case MASK:
-		if (rising)
-			disable_irq(irq_to_rising(irq));
-		if (falling)
-			disable_irq(irq_to_falling(irq));
-		break;
-	case UNMASK:
-		if (rising)
-			enable_irq(irq_to_rising(irq));
-		if (falling)
-			enable_irq(irq_to_falling(irq));
-		break;
-	case NONE:
-		break;
-	}
-	ab8500_gpio->irq_action = NONE;
-	ab8500_gpio->rising &= ~(BIT(offset));
-	ab8500_gpio->falling &= ~(BIT(offset));
-	mutex_unlock(&ab8500_gpio->lock);
-}
-
-
-static void ab8500_gpio_irq_mask(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	ab8500_gpio->irq_action = MASK;
-}
-
-static void ab8500_gpio_irq_unmask(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	ab8500_gpio->irq_action = UNMASK;
-}
-
-static int ab8500_gpio_irq_set_type(unsigned int irq, unsigned int type)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	int offset = irq - ab8500_gpio->irq_base;
-
-	if (type == IRQ_TYPE_EDGE_BOTH) {
-		ab8500_gpio->rising =  BIT(offset);
-		ab8500_gpio->falling = BIT(offset);
-	} else if (type == IRQ_TYPE_EDGE_RISING) {
-		ab8500_gpio->rising =  BIT(offset);
-	} else  {
-		ab8500_gpio->falling = BIT(offset);
-	}
-	return 0;
-}
-
-unsigned int ab8500_gpio_irq_startup(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	ab8500_gpio->irq_action = STARTUP;
-	return 0;
-}
-
-void ab8500_gpio_irq_shutdown(unsigned int irq)
-{
-	struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq);
-	ab8500_gpio->irq_action = SHUTDOWN;
-}
-
-static struct irq_chip ab8500_gpio_irq_chip = {
-	.name			= "ab8500-gpio",
-	.startup		= ab8500_gpio_irq_startup,
-	.shutdown		= ab8500_gpio_irq_shutdown,
-	.bus_lock		= ab8500_gpio_irq_lock,
-	.bus_sync_unlock	= ab8500_gpio_irq_sync_unlock,
-	.mask			= ab8500_gpio_irq_mask,
-	.unmask			= ab8500_gpio_irq_unmask,
-	.set_type		= ab8500_gpio_irq_set_type,
-};
-
-static int ab8500_gpio_irq_init(struct ab8500_gpio *ab8500_gpio)
-{
-	u32 base = ab8500_gpio->irq_base;
-	int irq;
-
-	for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ ; irq++) {
-		set_irq_chip_data(irq, ab8500_gpio);
-		set_irq_chip_and_handler(irq, &ab8500_gpio_irq_chip,
-				handle_simple_irq);
-		set_irq_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
-		set_irq_flags(irq, IRQF_VALID);
-#else
-		set_irq_noprobe(irq);
-#endif
-	}
-
-	return 0;
-}
-
-static void ab8500_gpio_irq_remove(struct ab8500_gpio *ab8500_gpio)
-{
-	int base = ab8500_gpio->irq_base;
-	int irq;
-
-	for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ; irq++) {
-#ifdef CONFIG_ARM
-		set_irq_flags(irq, 0);
-#endif
-		set_irq_chip_and_handler(irq, NULL, NULL);
-		set_irq_chip_data(irq, NULL);
-	}
-}
-
-static int ab8500_gpio_probe(struct platform_device *pdev)
-{
-	struct ab8500_platform_data *ab8500_pdata =
-				dev_get_platdata(pdev->dev.parent);
-	struct ab8500_gpio_platform_data *pdata;
-	struct ab8500_gpio *ab8500_gpio;
-	int ret;
-	int i;
-
-	pdata = ab8500_pdata->gpio;
-	if (!pdata)	{
-		dev_err(&pdev->dev, "gpio platform data missing\n");
-		return -ENODEV;
-	}
-
-	ab8500_gpio = kzalloc(sizeof(struct ab8500_gpio), GFP_KERNEL);
-	if (ab8500_gpio == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return -ENOMEM;
-	}
-	ab8500_gpio->dev = &pdev->dev;
-	ab8500_gpio->parent = dev_get_drvdata(pdev->dev.parent);
-	ab8500_gpio->chip = ab8500gpio_chip;
-	ab8500_gpio->chip.ngpio = AB8500_NUM_GPIO;
-	ab8500_gpio->chip.dev = &pdev->dev;
-	ab8500_gpio->chip.base = pdata->gpio_base;
-	ab8500_gpio->irq_base = pdata->irq_base;
-	/* initialize the lock */
-	mutex_init(&ab8500_gpio->lock);
-	/*
-	 * AB8500 core will handle and clear the IRQ
-	 * configre GPIO based on config-reg value.
-	 * These values are for selecting the PINs as
-	 * GPIO or alternate function
-	 */
-	for (i = AB8500_GPIO_SEL1_REG; i <= AB8500_GPIO_SEL6_REG; i++)	{
-		ret = abx500_set_register_interruptible(ab8500_gpio->dev,
-				AB8500_MISC, i,
-				pdata->config_reg[i]);
-		if (ret < 0)
-			goto out_free;
-	}
-	ret = abx500_set_register_interruptible(ab8500_gpio->dev, AB8500_MISC,
-				AB8500_GPIO_ALTFUN_REG,
-				pdata->config_reg[ALTFUN_REG_INDEX]);
-	if (ret < 0)
-		goto out_free;
-
-	ret = ab8500_gpio_irq_init(ab8500_gpio);
-	if (ret)
-		goto out_free;
-	ret = gpiochip_add(&ab8500_gpio->chip);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to add gpiochip: %d\n",
-				ret);
-		goto out_rem_irq;
-	}
-	platform_set_drvdata(pdev, ab8500_gpio);
-	return 0;
-
-out_rem_irq:
-	ab8500_gpio_irq_remove(ab8500_gpio);
-out_free:
-	mutex_destroy(&ab8500_gpio->lock);
-	kfree(ab8500_gpio);
-	return ret;
-}
-
-/*
- * ab8500_gpio_remove() - remove Ab8500-gpio driver
- * @pdev :	Platform device registered
- */
-static int ab8500_gpio_remove(struct platform_device *pdev)
-{
-	struct ab8500_gpio *ab8500_gpio = platform_get_drvdata(pdev);
-	int ret;
-
-	ret = gpiochip_remove(&ab8500_gpio->chip);
-	if (ret < 0) {
-		dev_err(ab8500_gpio->dev, "unable to remove gpiochip: %d\n",
-			ret);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, NULL);
-	mutex_destroy(&ab8500_gpio->lock);
-	kfree(ab8500_gpio);
-
-	return 0;
-}
-
-static struct platform_driver ab8500_gpio_driver = {
-	.driver = {
-		.name = "ab8500-gpio",
-		.owner = THIS_MODULE,
-	},
-	.probe = ab8500_gpio_probe,
-	.remove = ab8500_gpio_remove,
-};
-
-static int __init ab8500_gpio_init(void)
-{
-	return platform_driver_register(&ab8500_gpio_driver);
-}
-arch_initcall(ab8500_gpio_init);
-
-static void __exit ab8500_gpio_exit(void)
-{
-	platform_driver_unregister(&ab8500_gpio_driver);
-}
-module_exit(ab8500_gpio_exit);
-
-MODULE_AUTHOR("BIBEK BASU <bibek.basu@stericsson.com>");
-MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins to be used as GPIO");
-MODULE_ALIAS("platform:ab8500-gpio");
-MODULE_LICENSE("GPL v2");