Merge branch 'usb-3.3-rc4' into usb-next

This is to pull in the xhci changes and the other fixes and device id
updates that were done in Linus's tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

49 files changed, 935 insertions, 349 deletions

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 89da43f73c0..fd37bfbfbcd 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1295,6 +1295,7 @@ EXPORT_SYMBOL(int_to_scsilun);
  *   LUNs even if it's older than SCSI-3.
  *   If BLIST_NOREPORTLUN is set, return 1 always.
  *   If BLIST_NOLUN is set, return 0 always.
+ *   If starget->no_report_luns is set, return 1 always.
  *
  * Return:
  *     0: scan completed (or no memory, so further scanning is futile)
@@ -1321,6 +1322,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
 	 * Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set.
 	 * Also allow SCSI-2 if BLIST_REPORTLUN2 is set and host adapter does
 	 * support more than 8 LUNs.
+	 * Don't attempt if the target doesn't support REPORT LUNS.
 	 */
 	if (bflags & BLIST_NOREPORTLUN)
 		return 1;
@@ -1332,6 +1334,8 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
 		return 1;
 	if (bflags & BLIST_NOLUN)
 		return 0;
+	if (starget->no_report_luns)
+		return 1;
 
 	if (!(sdev = scsi_device_lookup_by_target(starget, 0))) {
 		sdev = scsi_alloc_sdev(starget, 0, NULL);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index c691fb50e6c..d173b90b25e 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2349,7 +2349,7 @@ static int sd_try_extended_inquiry(struct scsi_device *sdp)
 	 * some USB ones crash on receiving them, and the pages
 	 * we currently ask for are for SPC-3 and beyond
 	 */
-	if (sdp->scsi_level > SCSI_SPC_2)
+	if (sdp->scsi_level > SCSI_SPC_2 && !sdp->skip_vpd_pages)
 		return 1;
 	return 0;
 }
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 75823a1abeb..0b0afc81a54 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -76,6 +76,7 @@ config USB_ARCH_HAS_EHCI
 	default y if MICROBLAZE
 	default y if SPARC_LEON
 	default y if ARCH_MMP
+	default y if MACH_LOONGSON1
 	default PCI
 
 # some non-PCI HCDs implement xHCI
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index d2b3cffca3f..b27bbb957e1 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -31,6 +31,8 @@
 #define DRIVER_AUTHOR "Oliver Neukum"
 #define DRIVER_DESC "USB Abstract Control Model driver for USB WCM Device Management"
 
+#define HUAWEI_VENDOR_ID	0x12D1
+
 static const struct usb_device_id wdm_ids[] = {
 	{
 		.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
@@ -38,6 +40,20 @@ static const struct usb_device_id wdm_ids[] = {
 		.bInterfaceClass = USB_CLASS_COMM,
 		.bInterfaceSubClass = USB_CDC_SUBCLASS_DMM
 	},
+	{
+		/* 
+		 * Huawei E392, E398 and possibly other Qualcomm based modems
+		 * embed the Qualcomm QMI protocol inside CDC on CDC ECM like
+		 * control interfaces.  Userspace access to this is required
+		 * to configure the accompanying data interface
+		 */
+		.match_flags        = USB_DEVICE_ID_MATCH_VENDOR |
+					USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor           = HUAWEI_VENDOR_ID,
+		.bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
+		.bInterfaceSubClass = 1,
+		.bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */
+	},
 	{ }
 };
 
@@ -54,6 +70,7 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
 #define WDM_POLL_RUNNING	6
 #define WDM_RESPONDING		7
 #define WDM_SUSPENDING		8
+#define WDM_RESETTING		9
 
 #define WDM_MAX			16
 
@@ -82,7 +99,6 @@ struct wdm_device {
 	u16			bufsize;
 	u16			wMaxCommand;
 	u16			wMaxPacketSize;
-	u16			bMaxPacketSize0;
 	__le16			inum;
 	int			reslength;
 	int			length;
@@ -162,11 +178,9 @@ static void wdm_int_callback(struct urb *urb)
 	int rv = 0;
 	int status = urb->status;
 	struct wdm_device *desc;
-	struct usb_ctrlrequest *req;
 	struct usb_cdc_notification *dr;
 
 	desc = urb->context;
-	req = desc->irq;
 	dr = (struct usb_cdc_notification *)desc->sbuf;
 
 	if (status) {
@@ -213,24 +227,6 @@ static void wdm_int_callback(struct urb *urb)
 		goto exit;
 	}
 
-	req->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
-	req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
-	req->wValue = 0;
-	req->wIndex = desc->inum;
-	req->wLength = cpu_to_le16(desc->wMaxCommand);
-
-	usb_fill_control_urb(
-		desc->response,
-		interface_to_usbdev(desc->intf),
-		/* using common endpoint 0 */
-		usb_rcvctrlpipe(interface_to_usbdev(desc->intf), 0),
-		(unsigned char *)req,
-		desc->inbuf,
-		desc->wMaxCommand,
-		wdm_in_callback,
-		desc
-	);
-	desc->response->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	spin_lock(&desc->iuspin);
 	clear_bit(WDM_READ, &desc->flags);
 	set_bit(WDM_RESPONDING, &desc->flags);
@@ -279,14 +275,8 @@ static void free_urbs(struct wdm_device *desc)
 
 static void cleanup(struct wdm_device *desc)
 {
-	usb_free_coherent(interface_to_usbdev(desc->intf),
-			  desc->wMaxPacketSize,
-			  desc->sbuf,
-			  desc->validity->transfer_dma);
-	usb_free_coherent(interface_to_usbdev(desc->intf),
-			  desc->bMaxPacketSize0,
-			  desc->inbuf,
-			  desc->response->transfer_dma);
+	kfree(desc->sbuf);
+	kfree(desc->inbuf);
 	kfree(desc->orq);
 	kfree(desc->irq);
 	kfree(desc->ubuf);
@@ -351,6 +341,10 @@ static ssize_t wdm_write
 	else
 		if (test_bit(WDM_IN_USE, &desc->flags))
 			r = -EAGAIN;
+
+	if (test_bit(WDM_RESETTING, &desc->flags))
+		r = -EIO;
+
 	if (r < 0) {
 		kfree(buf);
 		goto out;
@@ -430,6 +424,10 @@ retry:
 			rv = -ENODEV;
 			goto err;
 		}
+		if (test_bit(WDM_RESETTING, &desc->flags)) {
+			rv = -EIO;
+			goto err;
+		}
 		usb_mark_last_busy(interface_to_usbdev(desc->intf));
 		if (rv < 0) {
 			rv = -ERESTARTSYS;
@@ -631,7 +629,6 @@ static void wdm_rxwork(struct work_struct *work)
 static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
 	int rv = -EINVAL;
-	struct usb_device *udev = interface_to_usbdev(intf);
 	struct wdm_device *desc;
 	struct usb_host_interface *iface;
 	struct usb_endpoint_descriptor *ep;
@@ -692,7 +689,6 @@ next_desc:
 		goto err;
 
 	desc->wMaxPacketSize = usb_endpoint_maxp(ep);
-	desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
 
 	desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
 	if (!desc->orq)
@@ -717,19 +713,13 @@ next_desc:
 	if (!desc->ubuf)
 		goto err;
 
-	desc->sbuf = usb_alloc_coherent(interface_to_usbdev(intf),
-					desc->wMaxPacketSize,
-					GFP_KERNEL,
-					&desc->validity->transfer_dma);
+	desc->sbuf = kmalloc(desc->wMaxPacketSize, GFP_KERNEL);
 	if (!desc->sbuf)
 		goto err;
 
-	desc->inbuf = usb_alloc_coherent(interface_to_usbdev(intf),
-					 desc->wMaxCommand,
-					 GFP_KERNEL,
-					 &desc->response->transfer_dma);
+	desc->inbuf = kmalloc(desc->wMaxCommand, GFP_KERNEL);
 	if (!desc->inbuf)
-		goto err2;
+		goto err;
 
 	usb_fill_int_urb(
 		desc->validity,
@@ -741,30 +731,39 @@ next_desc:
 		desc,
 		ep->bInterval
 	);
-	desc->validity->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	desc->irq->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
+	desc->irq->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
+	desc->irq->wValue = 0;
+	desc->irq->wIndex = desc->inum;
+	desc->irq->wLength = cpu_to_le16(desc->wMaxCommand);
+
+	usb_fill_control_urb(
+		desc->response,
+		interface_to_usbdev(intf),
+		/* using common endpoint 0 */
+		usb_rcvctrlpipe(interface_to_usbdev(desc->intf), 0),
+		(unsigned char *)desc->irq,
+		desc->inbuf,
+		desc->wMaxCommand,
+		wdm_in_callback,
+		desc
+	);
 
 	usb_set_intfdata(intf, desc);
 	rv = usb_register_dev(intf, &wdm_class);
 	if (rv < 0)
-		goto err3;
+		goto err2;
 	else
-		dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
-			intf->minor - WDM_MINOR_BASE);
+		dev_info(&intf->dev, "%s: USB WDM device\n", dev_name(intf->usb_dev));
 out:
 	return rv;
-err3:
-	usb_set_intfdata(intf, NULL);
-	usb_free_coherent(interface_to_usbdev(desc->intf),
-			  desc->bMaxPacketSize0,
-			desc->inbuf,
-			desc->response->transfer_dma);
 err2:
-	usb_free_coherent(interface_to_usbdev(desc->intf),
-			  desc->wMaxPacketSize,
-			  desc->sbuf,
-			  desc->validity->transfer_dma);
+	usb_set_intfdata(intf, NULL);
 err:
 	free_urbs(desc);
+	kfree(desc->inbuf);
+	kfree(desc->sbuf);
 	kfree(desc->ubuf);
 	kfree(desc->orq);
 	kfree(desc->irq);
@@ -869,10 +868,6 @@ static int wdm_pre_reset(struct usb_interface *intf)
 {
 	struct wdm_device *desc = usb_get_intfdata(intf);
 
-	mutex_lock(&desc->rlock);
-	mutex_lock(&desc->wlock);
-	kill_urbs(desc);
-
 	/*
 	 * we notify everybody using poll of
 	 * an exceptional situation
@@ -880,9 +875,16 @@ static int wdm_pre_reset(struct usb_interface *intf)
 	 * message from the device is lost
 	 */
 	spin_lock_irq(&desc->iuspin);
+	set_bit(WDM_RESETTING, &desc->flags);	/* inform read/write */
+	set_bit(WDM_READ, &desc->flags);	/* unblock read */
+	clear_bit(WDM_IN_USE, &desc->flags);	/* unblock write */
 	desc->rerr = -EINTR;
 	spin_unlock_irq(&desc->iuspin);
 	wake_up_all(&desc->wait);
+	mutex_lock(&desc->rlock);
+	mutex_lock(&desc->wlock);
+	kill_urbs(desc);
+	cancel_work_sync(&desc->rxwork);
 	return 0;
 }
 
@@ -891,6 +893,7 @@ static int wdm_post_reset(struct usb_interface *intf)
 	struct wdm_device *desc = usb_get_intfdata(intf);
 	int rv;
 
+	clear_bit(WDM_RESETTING, &desc->flags);
 	rv = recover_from_urb_loss(desc);
 	mutex_unlock(&desc->wlock);
 	mutex_unlock(&desc->rlock);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index d40ff956881..d77daf3683d 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -958,13 +958,8 @@ void usb_rebind_intf(struct usb_interface *intf)
 	int rc;
 
 	/* Delayed unbind of an existing driver */
-	if (intf->dev.driver) {
-		struct usb_driver *driver =
-				to_usb_driver(intf->dev.driver);
-
-		dev_dbg(&intf->dev, "forced unbind\n");
-		usb_driver_release_interface(driver, intf);
-	}
+	if (intf->dev.driver)
+		usb_forced_unbind_intf(intf);
 
 	/* Try to rebind the interface */
 	if (!intf->dev.power.is_prepared) {
@@ -977,15 +972,13 @@ void usb_rebind_intf(struct usb_interface *intf)
 
 #ifdef CONFIG_PM
 
-#define DO_UNBIND	0
-#define DO_REBIND	1
-
-/* Unbind drivers for @udev's interfaces that don't support suspend/resume,
- * or rebind interfaces that have been unbound, according to @action.
+/* Unbind drivers for @udev's interfaces that don't support suspend/resume
+ * There is no check for reset_resume here because it can be determined
+ * only during resume whether reset_resume is needed.
  *
  * The caller must hold @udev's device lock.
  */
-static void do_unbind_rebind(struct usb_device *udev, int action)
+static void unbind_no_pm_drivers_interfaces(struct usb_device *udev)
 {
 	struct usb_host_config	*config;
 	int			i;
@@ -996,23 +989,53 @@ static void do_unbind_rebind(struct usb_device *udev, int action)
 	if (config) {
 		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
 			intf = config->interface[i];
-			switch (action) {
-			case DO_UNBIND:
-				if (intf->dev.driver) {
-					drv = to_usb_driver(intf->dev.driver);
-					if (!drv->suspend || !drv->resume)
-						usb_forced_unbind_intf(intf);
-				}
-				break;
-			case DO_REBIND:
-				if (intf->needs_binding)
-					usb_rebind_intf(intf);
-				break;
+
+			if (intf->dev.driver) {
+				drv = to_usb_driver(intf->dev.driver);
+				if (!drv->suspend || !drv->resume)
+					usb_forced_unbind_intf(intf);
 			}
 		}
 	}
 }
 
+/* Unbind drivers for @udev's interfaces that failed to support reset-resume.
+ * These interfaces have the needs_binding flag set by usb_resume_interface().
+ *
+ * The caller must hold @udev's device lock.
+ */
+static void unbind_no_reset_resume_drivers_interfaces(struct usb_device *udev)
+{
+	struct usb_host_config	*config;
+	int			i;
+	struct usb_interface	*intf;
+
+	config = udev->actconfig;
+	if (config) {
+		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+			intf = config->interface[i];
+			if (intf->dev.driver && intf->needs_binding)
+				usb_forced_unbind_intf(intf);
+		}
+	}
+}
+
+static void do_rebind_interfaces(struct usb_device *udev)
+{
+	struct usb_host_config	*config;
+	int			i;
+	struct usb_interface	*intf;
+
+	config = udev->actconfig;
+	if (config) {
+		for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+			intf = config->interface[i];
+			if (intf->needs_binding)
+				usb_rebind_intf(intf);
+		}
+	}
+}
+
 static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
 {
 	struct usb_device_driver	*udriver;
@@ -1302,35 +1325,48 @@ int usb_suspend(struct device *dev, pm_message_t msg)
 {
 	struct usb_device	*udev = to_usb_device(dev);
 
-	do_unbind_rebind(udev, DO_UNBIND);
+	unbind_no_pm_drivers_interfaces(udev);
+
+	/* From now on we are sure all drivers support suspend/resume
+	 * but not necessarily reset_resume()
+	 * so we may still need to unbind and rebind upon resume
+	 */
 	choose_wakeup(udev, msg);
 	return usb_suspend_both(udev, msg);
 }
 
 /* The device lock is held by the PM core */
+int usb_resume_complete(struct device *dev)
+{
+	struct usb_device *udev = to_usb_device(dev);
+
+	/* For PM complete calls, all we do is rebind interfaces
+	 * whose needs_binding flag is set
+	 */
+	if (udev->state != USB_STATE_NOTATTACHED)
+		do_rebind_interfaces(udev);
+	return 0;
+}
+
+/* The device lock is held by the PM core */
 int usb_resume(struct device *dev, pm_message_t msg)
 {
 	struct usb_device	*udev = to_usb_device(dev);
 	int			status;
 
-	/* For PM complete calls, all we do is rebind interfaces */
-	if (msg.event == PM_EVENT_ON) {
-		if (udev->state != USB_STATE_NOTATTACHED)
-			do_unbind_rebind(udev, DO_REBIND);
-		status = 0;
-
-	/* For all other calls, take the device back to full power and
+	/* For all calls, take the device back to full power and
 	 * tell the PM core in case it was autosuspended previously.
-	 * Unbind the interfaces that will need rebinding later.
+	 * Unbind the interfaces that will need rebinding later,
+	 * because they fail to support reset_resume.
+	 * (This can't be done in usb_resume_interface()
+	 * above because it doesn't own the right set of locks.)
 	 */
-	} else {
-		status = usb_resume_both(udev, msg);
-		if (status == 0) {
-			pm_runtime_disable(dev);
-			pm_runtime_set_active(dev);
-			pm_runtime_enable(dev);
-			do_unbind_rebind(udev, DO_REBIND);
-		}
+	status = usb_resume_both(udev, msg);
+	if (status == 0) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+		unbind_no_reset_resume_drivers_interfaces(udev);
 	}
 
 	/* Avoid PM error messages for devices disconnected while suspended
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 265c2f675d0..72c51cdce90 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -62,6 +62,8 @@ struct usb_hub {
 							resumed */
 	unsigned long		removed_bits[1]; /* ports with a "removed"
 							device present */
+	unsigned long		wakeup_bits[1];	/* ports that have signaled
+							remote wakeup */
 #if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
 #error event_bits[] is too short!
 #endif
@@ -411,6 +413,29 @@ void usb_kick_khubd(struct usb_device *hdev)
 		kick_khubd(hub);
 }
 
+/*
+ * Let the USB core know that a USB 3.0 device has sent a Function Wake Device
+ * Notification, which indicates it had initiated remote wakeup.
+ *
+ * USB 3.0 hubs do not report the port link state change from U3 to U0 when the
+ * device initiates resume, so the USB core will not receive notice of the
+ * resume through the normal hub interrupt URB.
+ */
+void usb_wakeup_notification(struct usb_device *hdev,
+		unsigned int portnum)
+{
+	struct usb_hub *hub;
+
+	if (!hdev)
+		return;
+
+	hub = hdev_to_hub(hdev);
+	if (hub) {
+		set_bit(portnum, hub->wakeup_bits);
+		kick_khubd(hub);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_wakeup_notification);
 
 /* completion function, fires on port status changes and various faults */
 static void hub_irq(struct urb *urb)
@@ -823,12 +848,6 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_ENABLE);
 		}
-		if (portchange & USB_PORT_STAT_C_LINK_STATE) {
-			need_debounce_delay = true;
-			clear_port_feature(hub->hdev, port1,
-					USB_PORT_FEAT_C_PORT_LINK_STATE);
-		}
-
 		if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
 				hub_is_superspeed(hub->hdev)) {
 			need_debounce_delay = true;
@@ -850,12 +869,19 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 				set_bit(port1, hub->change_bits);
 
 		} else if (portstatus & USB_PORT_STAT_ENABLE) {
+			bool port_resumed = (portstatus &
+					USB_PORT_STAT_LINK_STATE) ==
+				USB_SS_PORT_LS_U0;
 			/* The power session apparently survived the resume.
 			 * If there was an overcurrent or suspend change
 			 * (i.e., remote wakeup request), have khubd
-			 * take care of it.
+			 * take care of it.  Look at the port link state
+			 * for USB 3.0 hubs, since they don't have a suspend
+			 * change bit, and they don't set the port link change
+			 * bit on device-initiated resume.
 			 */
-			if (portchange)
+			if (portchange || (hub_is_superspeed(hub->hdev) &&
+						port_resumed))
 				set_bit(port1, hub->change_bits);
 
 		} else if (udev->persist_enabled) {
@@ -1293,14 +1319,8 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	desc = intf->cur_altsetting;
 	hdev = interface_to_usbdev(intf);
 
-	/* Hubs have proper suspend/resume support.  USB 3.0 device suspend is
-	 * different from USB 2.0/1.1 device suspend, and unfortunately we
-	 * don't support it yet.  So leave autosuspend disabled for USB 3.0
-	 * external hubs for now.  Enable autosuspend for USB 3.0 roothubs,
-	 * since that isn't a "real" hub.
-	 */
-	if (!hub_is_superspeed(hdev) || !hdev->parent)
-		usb_enable_autosuspend(hdev);
+	/* Hubs have proper suspend/resume support. */
+	usb_enable_autosuspend(hdev);
 
 	if (hdev->level == MAX_TOPO_LEVEL) {
 		dev_err(&intf->dev,
@@ -1842,6 +1862,37 @@ fail:
 	return err;
 }
 
+static void set_usb_port_removable(struct usb_device *udev)
+{
+	struct usb_device *hdev = udev->parent;
+	struct usb_hub *hub;
+	u8 port = udev->portnum;
+	u16 wHubCharacteristics;
+	bool removable = true;
+
+	if (!hdev)
+		return;
+
+	hub = hdev_to_hub(udev->parent);
+
+	wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
+
+	if (!(wHubCharacteristics & HUB_CHAR_COMPOUND))
+		return;
+
+	if (hub_is_superspeed(hdev)) {
+		if (hub->descriptor->u.ss.DeviceRemovable & (1 << port))
+			removable = false;
+	} else {
+		if (hub->descriptor->u.hs.DeviceRemovable[port / 8] & (1 << (port % 8)))
+			removable = false;
+	}
+
+	if (removable)
+		udev->removable = USB_DEVICE_REMOVABLE;
+	else
+		udev->removable = USB_DEVICE_FIXED;
+}
 
 /**
  * usb_new_device - perform initial device setup (usbcore-internal)
@@ -1900,6 +1951,15 @@ int usb_new_device(struct usb_device *udev)
 	announce_device(udev);
 
 	device_enable_async_suspend(&udev->dev);
+
+	/*
+	 * check whether the hub marks this port as non-removable. Do it
+	 * now so that platform-specific data can override it in
+	 * device_add()
+	 */
+	if (udev->parent)
+		set_usb_port_removable(udev);
+
 	/* Register the device.  The device driver is responsible
 	 * for configuring the device and invoking the add-device
 	 * notifier chain (used by usbfs and possibly others).
@@ -2385,11 +2445,27 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 	 * we don't explicitly enable it here.
 	 */
 	if (udev->do_remote_wakeup) {
-		status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
-				USB_DEVICE_REMOTE_WAKEUP, 0,
-				NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
+		if (!hub_is_superspeed(hub->hdev)) {
+			status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+					USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+					USB_DEVICE_REMOTE_WAKEUP, 0,
+					NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+		} else {
+			/* Assume there's only one function on the USB 3.0
+			 * device and enable remote wake for the first
+			 * interface. FIXME if the interface association
+			 * descriptor shows there's more than one function.
+			 */
+			status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+					USB_REQ_SET_FEATURE,
+					USB_RECIP_INTERFACE,
+					USB_INTRF_FUNC_SUSPEND,
+					USB_INTRF_FUNC_SUSPEND_RW |
+					USB_INTRF_FUNC_SUSPEND_LP,
+					NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+		}
 		if (status) {
 			dev_dbg(&udev->dev, "won't remote wakeup, status %d\n",
 					status);
@@ -2679,6 +2755,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 	struct usb_hub		*hub = usb_get_intfdata (intf);
 	struct usb_device	*hdev = hub->hdev;
 	unsigned		port1;
+	int			status;
 
 	/* Warn if children aren't already suspended */
 	for (port1 = 1; port1 <= hdev->maxchild; port1++) {
@@ -2691,6 +2768,17 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 				return -EBUSY;
 		}
 	}
+	if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) {
+		/* Enable hub to send remote wakeup for all ports. */
+		for (port1 = 1; port1 <= hdev->maxchild; port1++) {
+			status = set_port_feature(hdev,
+					port1 |
+					USB_PORT_FEAT_REMOTE_WAKE_CONNECT |
+					USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT |
+					USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT,
+					USB_PORT_FEAT_REMOTE_WAKE_MASK);
+		}
+	}
 
 	dev_dbg(&intf->dev, "%s\n", __func__);
 
@@ -3424,6 +3512,46 @@ done:
 		hcd->driver->relinquish_port(hcd, port1);
 }
 
+/* Returns 1 if there was a remote wakeup and a connect status change. */
+static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
+		u16 portstatus, u16 portchange)
+{
+	struct usb_device *hdev;
+	struct usb_device *udev;
+	int connect_change = 0;
+	int ret;
+
+	hdev = hub->hdev;
+	udev = hdev->children[port-1];
+	if (!hub_is_superspeed(hdev)) {
+		if (!(portchange & USB_PORT_STAT_C_SUSPEND))
+			return 0;
+		clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND);
+	} else {
+		if (!udev || udev->state != USB_STATE_SUSPENDED ||
+				 (portstatus & USB_PORT_STAT_LINK_STATE) !=
+				 USB_SS_PORT_LS_U0)
+			return 0;
+	}
+
+	if (udev) {
+		/* TRSMRCY = 10 msec */
+		msleep(10);
+
+		usb_lock_device(udev);
+		ret = usb_remote_wakeup(udev);
+		usb_unlock_device(udev);
+		if (ret < 0)
+			connect_change = 1;
+	} else {
+		ret = -ENODEV;
+		hub_port_disable(hub, port, 1);
+	}
+	dev_dbg(hub->intfdev, "resume on port %d, status %d\n",
+			port, ret);
+	return connect_change;
+}
+
 static void hub_events(void)
 {
 	struct list_head *tmp;
@@ -3436,7 +3564,7 @@ static void hub_events(void)
 	u16 portstatus;
 	u16 portchange;
 	int i, ret;
-	int connect_change;
+	int connect_change, wakeup_change;
 
 	/*
 	 *  We restart the list every time to avoid a deadlock with
@@ -3515,8 +3643,9 @@ static void hub_events(void)
 			if (test_bit(i, hub->busy_bits))
 				continue;
 			connect_change = test_bit(i, hub->change_bits);
+			wakeup_change = test_and_clear_bit(i, hub->wakeup_bits);
 			if (!test_and_clear_bit(i, hub->event_bits) &&
-					!connect_change)
+					!connect_change && !wakeup_change)
 				continue;
 
 			ret = hub_port_status(hub, i,
@@ -3557,31 +3686,10 @@ static void hub_events(void)
 				}
 			}
 
-			if (portchange & USB_PORT_STAT_C_SUSPEND) {
-				struct usb_device *udev;
+			if (hub_handle_remote_wakeup(hub, i,
+						portstatus, portchange))
+				connect_change = 1;
 
-				clear_port_feature(hdev, i,
-					USB_PORT_FEAT_C_SUSPEND);
-				udev = hdev->children[i-1];
-				if (udev) {
-					/* TRSMRCY = 10 msec */
-					msleep(10);
-
-					usb_lock_device(udev);
-					ret = usb_remote_wakeup(hdev->
-							children[i-1]);
-					usb_unlock_device(udev);
-					if (ret < 0)
-						connect_change = 1;
-				} else {
-					ret = -ENODEV;
-					hub_port_disable(hub, i, 1);
-				}
-				dev_dbg (hub_dev,
-					"resume on port %d, status %d\n",
-					i, ret);
-			}
-			
 			if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
 				u16 status = 0;
 				u16 unused;
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 9e491ca2e5c..566d9f94f73 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -230,6 +230,28 @@ show_urbnum(struct device *dev, struct device_attribute *attr, char *buf)
 }
 static DEVICE_ATTR(urbnum, S_IRUGO, show_urbnum, NULL);
 
+static ssize_t
+show_removable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct usb_device *udev;
+	char *state;
+
+	udev = to_usb_device(dev);
+
+	switch (udev->removable) {
+	case USB_DEVICE_REMOVABLE:
+		state = "removable";
+		break;
+	case USB_DEVICE_FIXED:
+		state = "fixed";
+		break;
+	default:
+		state = "unknown";
+	}
+
+	return sprintf(buf, "%s\n", state);
+}
+static DEVICE_ATTR(removable, S_IRUGO, show_removable, NULL);
 
 #ifdef	CONFIG_PM
 
@@ -626,6 +648,7 @@ static struct attribute *dev_attrs[] = {
 	&dev_attr_avoid_reset_quirk.attr,
 	&dev_attr_authorized.attr,
 	&dev_attr_remove.attr,
+	&dev_attr_removable.attr,
 	NULL,
 };
 static struct attribute_group dev_attr_grp = {
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 909625b91eb..f4f20c7b776 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -403,20 +403,17 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 	 * cause problems in HCDs if they get it wrong.
 	 */
 	{
-	unsigned int	orig_flags = urb->transfer_flags;
 	unsigned int	allowed;
 	static int pipetypes[4] = {
 		PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT
 	};
 
 	/* Check that the pipe's type matches the endpoint's type */
-	if (usb_pipetype(urb->pipe) != pipetypes[xfertype]) {
-		dev_err(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n",
+	if (usb_pipetype(urb->pipe) != pipetypes[xfertype])
+		dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n",
 			usb_pipetype(urb->pipe), pipetypes[xfertype]);
-		return -EPIPE;		/* The most suitable error code :-) */
-	}
 
-	/* enforce simple/standard policy */
+	/* Check against a simple/standard policy */
 	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK |
 			URB_FREE_BUFFER);
 	switch (xfertype) {
@@ -435,14 +432,12 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 		allowed |= URB_ISO_ASAP;
 		break;
 	}
-	urb->transfer_flags &= allowed;
+	allowed &= urb->transfer_flags;
 
-	/* fail if submitter gave bogus flags */
-	if (urb->transfer_flags != orig_flags) {
-		dev_err(&dev->dev, "BOGUS urb flags, %x --> %x\n",
-			orig_flags, urb->transfer_flags);
-		return -EINVAL;
-	}
+	/* warn if submitter gave bogus flags */
+	if (allowed != urb->transfer_flags)
+		dev_WARN(&dev->dev, "BOGUS urb flags, %x --> %x\n",
+			urb->transfer_flags, allowed);
 	}
 #endif
 	/*
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 8ca9f994a28..c74ba7bbc74 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -274,7 +274,7 @@ static int usb_dev_prepare(struct device *dev)
 static void usb_dev_complete(struct device *dev)
 {
 	/* Currently used only for rebinding interfaces */
-	usb_resume(dev, PMSG_ON);	/* FIXME: change to PMSG_COMPLETE */
+	usb_resume_complete(dev);
 }
 
 static int usb_dev_suspend(struct device *dev)
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 45e8479c377..71648dcbe43 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -56,6 +56,7 @@ extern void usb_major_cleanup(void);
 
 extern int usb_suspend(struct device *dev, pm_message_t msg);
 extern int usb_resume(struct device *dev, pm_message_t msg);
+extern int usb_resume_complete(struct device *dev);
 
 extern int usb_port_suspend(struct usb_device *dev, pm_message_t msg);
 extern int usb_port_resume(struct usb_device *dev, pm_message_t msg);
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index c26a82e83f6..10e008a730a 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -323,7 +323,9 @@ static int ehci_fsl_setup(struct usb_hcd *hcd)
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	int retval;
 	struct fsl_usb2_platform_data *pdata;
+	struct device *dev;
 
+	dev = hcd->self.controller;
 	pdata = hcd->self.controller->platform_data;
 	ehci->big_endian_desc = pdata->big_endian_desc;
 	ehci->big_endian_mmio = pdata->big_endian_mmio;
@@ -353,6 +355,16 @@ static int ehci_fsl_setup(struct usb_hcd *hcd)
 
 	ehci_reset(ehci);
 
+	if (of_device_is_compatible(dev->parent->of_node,
+				    "fsl,mpc5121-usb2-dr")) {
+		/*
+		 * set SBUSCFG:AHBBRST so that control msgs don't
+		 * fail when doing heavy PATA writes.
+		 */
+		ehci_writel(ehci, SBUSCFG_INCR8,
+			    hcd->regs + FSL_SOC_USB_SBUSCFG);
+	}
+
 	retval = ehci_fsl_reinit(ehci);
 	return retval;
 }
@@ -476,6 +488,8 @@ static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
 	ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
 		    hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
 
+	ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
+
 	/* restore EHCI registers */
 	ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
 	ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index bdf43e2adc5..6d5a94e9bb3 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -19,6 +19,8 @@
 #define _EHCI_FSL_H
 
 /* offsets for the non-ehci registers in the FSL SOC USB controller */
+#define FSL_SOC_USB_SBUSCFG	0x90
+#define SBUSCFG_INCR8		0x02	/* INCR8, specified */
 #define FSL_SOC_USB_ULPIVP	0x170
 #define FSL_SOC_USB_PORTSC1	0x184
 #define PORT_PTS_MSK		(3<<30)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index a007a9fe0f8..4918b0c59af 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1376,6 +1376,11 @@ MODULE_LICENSE ("GPL");
 #define        PLATFORM_DRIVER         ehci_mv_driver
 #endif
 
+#ifdef CONFIG_MACH_LOONGSON1
+#include "ehci-ls1x.c"
+#define PLATFORM_DRIVER		ehci_ls1x_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 77bbb2357e4..01011dd0cb5 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -107,7 +107,7 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
 	ehci->owned_ports = 0;
 }
 
-static int ehci_port_change(struct ehci_hcd *ehci)
+static int __maybe_unused ehci_port_change(struct ehci_hcd *ehci)
 {
 	int i = HCS_N_PORTS(ehci->hcs_params);
 
@@ -1076,7 +1076,8 @@ error_exit:
 	return retval;
 }
 
-static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
+static void __maybe_unused ehci_relinquish_port(struct usb_hcd *hcd,
+		int portnum)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 
@@ -1085,7 +1086,8 @@ static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum)
 	set_owner(ehci, --portnum, PORT_OWNER);
 }
 
-static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
+static int __maybe_unused ehci_port_handed_over(struct usb_hcd *hcd,
+		int portnum)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	u32 __iomem		*reg;
diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c
new file mode 100644
index 00000000000..a283e59709d
--- /dev/null
+++ b/drivers/usb/host/ehci-ls1x.c
@@ -0,0 +1,159 @@
+/*
+ *  Bus Glue for Loongson LS1X built-in EHCI controller.
+ *
+ *  Copyright (c) 2012 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+
+#include <linux/platform_device.h>
+
+static int ehci_ls1x_reset(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int ret;
+
+	ehci->caps = hcd->regs;
+
+	ret = ehci_setup(hcd);
+	if (ret)
+		return ret;
+
+	ehci_port_power(ehci, 0);
+
+	return 0;
+}
+
+static const struct hc_driver ehci_ls1x_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "LOONGSON1 EHCI",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset			= ehci_ls1x_reset,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_hcd_ls1x_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res;
+	int irq;
+	int ret;
+
+	pr_debug("initializing loongson1 ehci USB Controller\n");
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no IRQ. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+	irq = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no register addr. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	hcd = usb_create_hcd(&ehci_ls1x_hc_driver, &pdev->dev,
+				dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
+	hcd->rsrc_start	= res->start;
+	hcd->rsrc_len	= resource_size(res);
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		ret = -EBUSY;
+		goto err_put_hcd;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		ret = -EFAULT;
+		goto err_release_region;
+	}
+
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	if (ret)
+		goto err_iounmap;
+
+	return ret;
+
+err_iounmap:
+	iounmap(hcd->regs);
+err_release_region:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_put_hcd:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+static int ehci_hcd_ls1x_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static struct platform_driver ehci_ls1x_driver = {
+	.probe = ehci_hcd_ls1x_probe,
+	.remove = ehci_hcd_ls1x_remove,
+	.shutdown = usb_hcd_platform_shutdown,
+	.driver = {
+		.name = "ls1x-ehci",
+		.owner	= THIS_MODULE,
+	},
+};
+
+MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ls1x-ehci");
diff --git a/drivers/usb/host/imx21-dbg.c b/drivers/usb/host/imx21-dbg.c
index 6d753342716..ec98ecee351 100644
--- a/drivers/usb/host/imx21-dbg.c
+++ b/drivers/usb/host/imx21-dbg.c
@@ -239,7 +239,7 @@ static int debug_status_show(struct seq_file *s, void *v)
 		"ETDs allocated: %d/%d (max=%d)\n"
 		"ETDs in use sw: %d\n"
 		"ETDs in use hw: %d\n"
-		"DMEM alocated: %d/%d (max=%d)\n"
+		"DMEM allocated: %d/%d (max=%d)\n"
 		"DMEM blocks: %d\n"
 		"Queued waiting for ETD: %d\n"
 		"Queued waiting for DMEM: %d\n",
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 6b5eb1017e2..e37dea87bb5 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -565,6 +565,9 @@ static int uhci_start(struct usb_hcd *hcd)
 	struct dentry __maybe_unused *dentry;
 
 	hcd->uses_new_polling = 1;
+	/* Accept arbitrarily long scatter-gather lists */
+	if (!(hcd->driver->flags & HCD_LOCAL_MEM))
+		hcd->self.sg_tablesize = ~0;
 
 	spin_lock_init(&uhci->lock);
 	setup_timer(&uhci->fsbr_timer, uhci_fsbr_timeout,
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 557b6f32db8..673ad120c43 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -422,6 +422,32 @@ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 	xhci_writel(xhci, temp, port_array[port_id]);
 }
 
+void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
+		__le32 __iomem **port_array, int port_id, u16 wake_mask)
+{
+	u32 temp;
+
+	temp = xhci_readl(xhci, port_array[port_id]);
+	temp = xhci_port_state_to_neutral(temp);
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
+		temp |= PORT_WKCONN_E;
+	else
+		temp &= ~PORT_WKCONN_E;
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT)
+		temp |= PORT_WKDISC_E;
+	else
+		temp &= ~PORT_WKDISC_E;
+
+	if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT)
+		temp |= PORT_WKOC_E;
+	else
+		temp &= ~PORT_WKOC_E;
+
+	xhci_writel(xhci, temp, port_array[port_id]);
+}
+
 /* Test and clear port RWC bit */
 void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 				int port_id, u32 port_bit)
@@ -448,6 +474,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	int slot_id;
 	struct xhci_bus_state *bus_state;
 	u16 link_state = 0;
+	u16 wake_mask = 0;
 
 	max_ports = xhci_get_ports(hcd, &port_array);
 	bus_state = &xhci->bus_state[hcd_index(hcd)];
@@ -593,6 +620,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	case SetPortFeature:
 		if (wValue == USB_PORT_FEAT_LINK_STATE)
 			link_state = (wIndex & 0xff00) >> 3;
+		if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK)
+			wake_mask = wIndex & 0xff00;
 		wIndex &= 0xff;
 		if (!wIndex || wIndex > max_ports)
 			goto error;
@@ -703,6 +732,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			temp = xhci_readl(xhci, port_array[wIndex]);
 			xhci_dbg(xhci, "set port reset, actual port %d status  = 0x%x\n", wIndex, temp);
 			break;
+		case USB_PORT_FEAT_REMOTE_WAKE_MASK:
+			xhci_set_remote_wake_mask(xhci, port_array,
+					wIndex, wake_mask);
+			temp = xhci_readl(xhci, port_array[wIndex]);
+			xhci_dbg(xhci, "set port remote wake mask, "
+					"actual port %d status  = 0x%x\n",
+					wIndex, temp);
+			break;
 		case USB_PORT_FEAT_BH_PORT_RESET:
 			temp |= PORT_WR;
 			xhci_writel(xhci, temp, port_array[wIndex]);
@@ -883,6 +920,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 			t2 |= PORT_LINK_STROBE | XDEV_U3;
 			set_bit(port_index, &bus_state->bus_suspended);
 		}
+		/* USB core sets remote wake mask for USB 3.0 hubs,
+		 * including the USB 3.0 roothub, but only if CONFIG_USB_SUSPEND
+		 * is enabled, so also enable remote wake here.
+		 */
 		if (hcd->self.root_hub->do_remote_wakeup) {
 			if (t1 & PORT_CONNECT) {
 				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 383fc857491..8339d826ce5 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2157,7 +2157,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	unsigned int	val, val2;
 	u64		val_64;
 	struct xhci_segment	*seg;
-	u32 page_size;
+	u32 page_size, temp;
 	int i;
 
 	page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
@@ -2340,6 +2340,15 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
 
+	/* Enable USB 3.0 device notifications for function remote wake, which
+	 * is necessary for allowing USB 3.0 devices to do remote wakeup from
+	 * U3 (device suspend).
+	 */
+	temp = xhci_readl(xhci, &xhci->op_regs->dev_notification);
+	temp &= ~DEV_NOTE_MASK;
+	temp |= DEV_NOTE_FWAKE;
+	xhci_writel(xhci, temp, &xhci->op_regs->dev_notification);
+
 	return 0;
 
 fail:
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index b62037bff68..3a033240ec6 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1237,6 +1237,26 @@ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
 	return num_similar_speed_ports;
 }
 
+static void handle_device_notification(struct xhci_hcd *xhci,
+		union xhci_trb *event)
+{
+	u32 slot_id;
+	struct usb_device *udev;
+
+	slot_id = TRB_TO_SLOT_ID(event->generic.field[3]);
+	if (!xhci->devs[slot_id]) {
+		xhci_warn(xhci, "Device Notification event for "
+				"unused slot %u\n", slot_id);
+		return;
+	}
+
+	xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n",
+			slot_id);
+	udev = xhci->devs[slot_id]->udev;
+	if (udev && udev->parent)
+		usb_wakeup_notification(udev->parent, udev->portnum);
+}
+
 static void handle_port_status(struct xhci_hcd *xhci,
 		union xhci_trb *event)
 {
@@ -1321,20 +1341,21 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		}
 
 		if (DEV_SUPERSPEED(temp)) {
-			xhci_dbg(xhci, "resume SS port %d\n", port_id);
+			xhci_dbg(xhci, "remote wake SS port %d\n", port_id);
+			/* Set a flag to say the port signaled remote wakeup,
+			 * so we can tell the difference between the end of
+			 * device and host initiated resume.
+			 */
+			bus_state->port_remote_wakeup |= 1 << faked_port_index;
+			xhci_test_and_clear_bit(xhci, port_array,
+					faked_port_index, PORT_PLC);
 			xhci_set_link_state(xhci, port_array, faked_port_index,
 						XDEV_U0);
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					faked_port_index + 1);
-			if (!slot_id) {
-				xhci_dbg(xhci, "slot_id is zero\n");
-				goto cleanup;
-			}
-			xhci_ring_device(xhci, slot_id);
-			xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
-			/* Clear PORT_PLC */
-			xhci_test_and_clear_bit(xhci, port_array,
-						faked_port_index, PORT_PLC);
+			/* Need to wait until the next link state change
+			 * indicates the device is actually in U0.
+			 */
+			bogus_port_status = true;
+			goto cleanup;
 		} else {
 			xhci_dbg(xhci, "resume HS port %d\n", port_id);
 			bus_state->resume_done[faked_port_index] = jiffies +
@@ -1345,6 +1366,32 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		}
 	}
 
+	if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_U0 &&
+			DEV_SUPERSPEED(temp)) {
+		xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
+		/* We've just brought the device into U0 through either the
+		 * Resume state after a device remote wakeup, or through the
+		 * U3Exit state after a host-initiated resume.  If it's a device
+		 * initiated remote wake, don't pass up the link state change,
+		 * so the roothub behavior is consistent with external
+		 * USB 3.0 hub behavior.
+		 */
+		slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+				faked_port_index + 1);
+		if (slot_id && xhci->devs[slot_id])
+			xhci_ring_device(xhci, slot_id);
+		if (bus_state->port_remote_wakeup && (1 << faked_port_index)) {
+			bus_state->port_remote_wakeup &=
+				~(1 << faked_port_index);
+			xhci_test_and_clear_bit(xhci, port_array,
+					faked_port_index, PORT_PLC);
+			usb_wakeup_notification(hcd->self.root_hub,
+					faked_port_index + 1);
+			bogus_port_status = true;
+			goto cleanup;
+		}
+	}
+
 	if (hcd->speed != HCD_USB3)
 		xhci_test_and_clear_bit(xhci, port_array, faked_port_index,
 					PORT_PLC);
@@ -2277,6 +2324,9 @@ static int xhci_handle_event(struct xhci_hcd *xhci)
 		else
 			update_ptrs = 0;
 		break;
+	case TRB_TYPE(TRB_DEV_NOTE):
+		handle_device_notification(xhci, event);
+		break;
 	default:
 		if ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK) >=
 		    TRB_TYPE(48))
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index fb99c837914..0f493695610 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1344,6 +1344,7 @@ struct xhci_bus_state {
 	/* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */
 	u32			port_c_suspend;
 	u32			suspended_ports;
+	u32			port_remote_wakeup;
 	unsigned long		resume_done[USB_MAXCHILDREN];
 };
 
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 08a5575724c..ec9dc4e9a3f 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -286,7 +286,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 
 	if (result != size) {
 		dbg("%s - Unable to send config request, "
-				"request=0x%x size=%d result=%d\n",
+				"request=0x%x size=%d result=%d",
 				__func__, request, size, result);
 		if (result > 0)
 			result = -EPROTO;
@@ -340,7 +340,7 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 
 	if ((size > 2 && result != size) || result < 0) {
 		dbg("%s - Unable to send request, "
-				"request=0x%x size=%d result=%d\n",
+				"request=0x%x size=%d result=%d",
 				__func__, request, size, result);
 		if (result > 0)
 			result = -EPROTO;
@@ -683,13 +683,13 @@ static void cp210x_set_termios(struct tty_struct *tty,
 		default:
 			dbg("cp210x driver does not "
 					"support the number of bits requested,"
-					" using 8 bit mode\n");
+					" using 8 bit mode");
 				bits |= BITS_DATA_8;
 				break;
 		}
 		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 			dbg("Number of data bits requested "
-					"not supported by device\n");
+					"not supported by device");
 	}
 
 	if ((cflag     & (PARENB|PARODD|CMSPAR)) !=
@@ -716,8 +716,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 			}
 		}
 		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
-			dbg("Parity mode not supported "
-					"by device\n");
+			dbg("Parity mode not supported by device");
 	}
 
 	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
@@ -732,7 +731,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 		}
 		if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
 			dbg("Number of stop bits requested "
-					"not supported by device\n");
+					"not supported by device");
 	}
 
 	if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 3bdeafa29c2..5ae86b349ca 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -800,7 +800,7 @@ send:
 		cypress_write_int_callback, port, priv->write_urb_interval);
 	result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev,
+		dev_err_console(port,
 				"%s - failed submitting write urb, error %d\n",
 							__func__, result);
 		priv->write_urb_in_use = 0;
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index b23bebd721a..2b1da0cc071 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -995,7 +995,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* return length of new data written, or error */
 	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 	if (ret < 0)
-		dev_err(&port->dev,
+		dev_err_console(port,
 			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
 	dbg("digi_write: returning %d", ret);
@@ -1065,7 +1065,7 @@ static void digi_write_bulk_callback(struct urb *urb)
 
 	spin_unlock(&priv->dp_port_lock);
 	if (ret && ret != -EPERM)
-		dev_err(&port->dev,
+		dev_err_console(port,
 			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
 }
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index f7403576f99..2a2fa2d0489 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -217,7 +217,7 @@ retry:
 	clear_bit(i, &port->write_urbs_free);
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev, "%s - error submitting urb: %d\n",
+		dev_err_console(port, "%s - error submitting urb: %d\n",
 						__func__, result);
 		set_bit(i, &port->write_urbs_free);
 		spin_lock_irqsave(&port->lock, flags);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 0497575e479..616b0786277 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1286,7 +1286,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
 	count = fifo->count;
 	buffer = kmalloc(count+2, GFP_ATOMIC);
 	if (buffer == NULL) {
-		dev_err(&edge_port->port->dev,
+		dev_err_console(edge_port->port,
 				"%s - no more kernel memory...\n", __func__);
 		edge_port->write_in_progress = false;
 		goto exit_send;
@@ -1331,7 +1331,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
 		/* something went wrong */
-		dev_err(&edge_port->port->dev,
+		dev_err_console(edge_port->port,
 			"%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n",
 				__func__, status);
 		edge_port->write_in_progress = false;
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 5818bfc3261..58a3697246a 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1817,7 +1817,7 @@ static void edge_bulk_out_callback(struct urb *urb)
 		    __func__, status);
 		return;
 	default:
-		dev_err(&urb->dev->dev, "%s - nonzero write bulk status "
+		dev_err_console(port, "%s - nonzero write bulk status "
 			"received: %d\n", __func__, status);
 	}
 
@@ -2111,7 +2111,7 @@ static void edge_send(struct tty_struct *tty)
 	/* send the data out the bulk port */
 	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev,
+		dev_err_console(port,
 			"%s - failed submitting write urb, error %d\n",
 				__func__, result);
 		edge_port->ep_write_urb_in_use = 0;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 4554ee49e63..4fb29b4aaad 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1294,7 +1294,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
 		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
 					       GFP_KERNEL);
 		if (urb->transfer_buffer == NULL) {
-			dev_err(&port->dev, "%s no more kernel memory...\n",
+			dev_err_console(port, "%s no more kernel memory...\n",
 				__func__);
 			goto exit;
 		}
@@ -1315,7 +1315,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* send it down the pipe */
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
-		dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
+		dev_err_console(port, "%s - usb_submit_urb(write bulk) failed "
 			"with status = %d\n", __func__, status);
 		bytes_sent = status;
 		goto exit;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 03b5e249e95..19b11cece6b 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1509,7 +1509,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 		    kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
 
 		if (urb->transfer_buffer == NULL) {
-			dev_err(&port->dev, "%s no more kernel memory...\n",
+			dev_err_console(port, "%s no more kernel memory...\n",
 				__func__);
 			goto exit;
 		}
@@ -1535,7 +1535,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	if (status) {
 		mos7840_port->busy[i] = 0;
-		dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
+		dev_err_console(port, "%s - usb_submit_urb(write bulk) failed "
 			"with status = %d\n", __func__, status);
 		bytes_sent = status;
 		goto exit;
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 8b8d58a2ac1..033e8afa6c7 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -254,7 +254,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 	result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
 	if (result) {
 		set_bit(0, &wport->write_urbs_free);
-		dev_err(&port->dev,
+		dev_err_console(port,
 			"%s - failed submitting write urb, error %d\n",
 			__func__, result);
 	} else
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index e287fd32682..343e626a06f 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -302,7 +302,7 @@ static void send_data(struct work_struct *work)
 	if (count != 0) {
 		allow = kmalloc(1, GFP_KERNEL);
 		if (!allow) {
-			dev_err(&port->dev, "%s(): kmalloc failed\n",
+			dev_err_console(port, "%s(): kmalloc failed\n",
 					__func__);
 			return;
 		}
@@ -334,7 +334,7 @@ static void send_data(struct work_struct *work)
 	port->write_urb->transfer_buffer_length = count;
 	result = usb_submit_urb(port->write_urb, GFP_NOIO);
 	if (result != 0) {
-		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
+		dev_err_console(port, "%s(): usb_submit_urb() failed"
 			       " with error %d\n", __func__, result);
 		priv->flags.write_urb_in_use = 0;
 	}
@@ -938,7 +938,7 @@ static void oti6858_write_bulk_callback(struct urb *urb)
 		port->write_urb->transfer_buffer_length = 1;
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result) {
-			dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
+			dev_err_console(port, "%s(): usb_submit_urb() failed,"
 					" error %d\n", __func__, result);
 		} else {
 			return;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 75b838eff17..74f2c7746cc 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1250,7 +1250,6 @@ static void ti_bulk_out_callback(struct urb *urb)
 {
 	struct ti_port *tport = urb->context;
 	struct usb_serial_port *port = tport->tp_port;
-	struct device *dev = &urb->dev->dev;
 	int status = urb->status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -1268,7 +1267,7 @@ static void ti_bulk_out_callback(struct urb *urb)
 		wake_up_interruptible(&tport->tp_write_wait);
 		return;
 	default:
-		dev_err(dev, "%s - nonzero urb status, %d\n",
+		dev_err_console(port, "%s - nonzero urb status, %d\n",
 			__func__, status);
 		tport->tp_tdev->td_urb_error = 1;
 		wake_up_interruptible(&tport->tp_write_wait);
@@ -1337,7 +1336,7 @@ static void ti_send(struct ti_port *tport)
 
 	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev, "%s - submit write urb failed, %d\n",
+		dev_err_console(port, "%s - submit write urb failed, %d\n",
 							__func__, result);
 		tport->tp_write_urb_in_use = 0;
 		/* TODO: reschedule ti_send */
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 7e0acf5c8e3..007cf3a2481 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -740,7 +740,7 @@ static int whiteheat_write(struct tty_struct *tty,
 		urb->transfer_buffer_length = bytes;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result) {
-			dev_err(&port->dev,
+			dev_err_console(port,
 				"%s - failed submitting write urb, error %d\n",
 				__func__, result);
 			sent = result;
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 51af2fee2ef..bab8c8fe829 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -1276,6 +1276,7 @@ static struct usb_driver alauda_driver = {
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	alauda_usb_ids,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };
 
 module_usb_driver(alauda_driver);
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index 387cbd47acc..5fe451d16e6 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -272,6 +272,7 @@ static struct usb_driver cypress_driver = {
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	cypress_usb_ids,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };
 
 module_usb_driver(cypress_driver);
diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c
index 15d41f2b3d6..35e9c51e669 100644
--- a/drivers/usb/storage/datafab.c
+++ b/drivers/usb/storage/datafab.c
@@ -751,6 +751,7 @@ static struct usb_driver datafab_driver = {
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	datafab_usb_ids,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };
 
 module_usb_driver(datafab_driver);
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index a6ade4071a9..30532d93eec 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -2407,6 +2407,7 @@ static struct usb_driver ene_ub6250_driver = {
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	ene_ub6250_usb_ids,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };
 
 module_usb_driver(ene_ub6250_driver);
diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c
index fa161574847..042cf9ef315 100644
--- a/drivers/usb/storage/freecom.c
+++ b/drivers/usb/storage/freecom.c
@@ -553,6 +553,7 @@ static struct usb_driver freecom_driver = {
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	freecom_usb_ids,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };
 
 module_usb_driver(freecom_driver);
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index bd550270083..31fa24e7e68 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1566,6 +1566,7 @@ static struct usb_driver isd200_driver = {
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	isd200_usb_ids,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };
 
 module_usb_driver(isd200_driver);
diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c
index a19211b5c26..e3b97383186 100644
--- a/drivers/usb/storage/jumpshot.c
+++ b/drivers/usb/storage/jumpshot.c
@@ -677,6 +677,7 @@ static struct usb_driver jumpshot_driver = {
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	jumpshot_usb_ids,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };
 
 module_usb_driver(jumpshot_driver);
diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
index e720f8ebdf9..a8708eae978 100644
--- a/drivers/usb/storage/karma.c
+++ b/drivers/usb/storage/karma.c
@@ -230,6 +230,7 @@ static struct usb_driver karma_driver = {
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	karma_usb_ids,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };
 
 module_usb_driver(karma_driver);
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index d75155c3820..886567a3806 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -312,6 +312,7 @@ static struct usb_driver onetouch_driver = {
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	onetouch_usb_ids,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };
 
 module_usb_driver(onetouch_driver);
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index d32f72061c0..b1c2fe8b6dc 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -1100,6 +1100,7 @@ static struct usb_driver realtek_cr_driver = {
 	.id_table = realtek_cr_ids,
 	.soft_unbind = 1,
 	.supports_autosuspend = 1,
+	.no_dynamic_id = 1,
 };
 
 module_usb_driver(realtek_cr_driver);
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 13b8bcdf3db..a324a5d21e9 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -78,8 +78,6 @@ static const char* host_info(struct Scsi_Host *host)
 
 static int slave_alloc (struct scsi_device *sdev)
 {
-	struct us_data *us = host_to_us(sdev->host);
-
 	/*
 	 * Set the INQUIRY transfer length to 36.  We don't use any of
 	 * the extra data and many devices choke if asked for more or
@@ -104,18 +102,6 @@ static int slave_alloc (struct scsi_device *sdev)
 	 */
 	blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
 
-	/*
-	 * The UFI spec treates the Peripheral Qualifier bits in an
-	 * INQUIRY result as reserved and requires devices to set them
-	 * to 0.  However the SCSI spec requires these bits to be set
-	 * to 3 to indicate when a LUN is not present.
-	 *
-	 * Let the scanning code know if this target merely sets
-	 * Peripheral Device Type to 0x1f to indicate no LUN.
-	 */
-	if (us->subclass == USB_SC_UFI)
-		sdev->sdev_target->pdt_1f_for_no_lun = 1;
-
 	return 0;
 }
 
@@ -197,6 +183,9 @@ static int slave_configure(struct scsi_device *sdev)
 		 * page x08, so we will skip it. */
 		sdev->skip_ms_page_8 = 1;
 
+		/* Some devices don't handle VPD pages correctly */
+		sdev->skip_vpd_pages = 1;
+
 		/* Some disks return the total number of blocks in response
 		 * to READ CAPACITY rather than the highest block number.
 		 * If this device makes that mistake, tell the sd driver. */
@@ -217,16 +206,6 @@ static int slave_configure(struct scsi_device *sdev)
 		if (sdev->scsi_level > SCSI_SPC_2)
 			us->fflags |= US_FL_SANE_SENSE;
 
-		/* Some devices report a SCSI revision level above 2 but are
-		 * unable to handle the REPORT LUNS command (for which
-		 * support is mandatory at level 3).  Since we already have
-		 * a Get-Max-LUN request, we won't lose much by setting the
-		 * revision level down to 2.  The only devices that would be
-		 * affected are those with sparse LUNs. */
-		if (sdev->scsi_level > SCSI_2)
-			sdev->sdev_target->scsi_level =
-					sdev->scsi_level = SCSI_2;
-
 		/* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
 		 * Hardware Error) when any low-level error occurs,
 		 * recoverable or not.  Setting this flag tells the SCSI
@@ -283,6 +262,33 @@ static int slave_configure(struct scsi_device *sdev)
 	return 0;
 }
 
+static int target_alloc(struct scsi_target *starget)
+{
+	struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent));
+
+	/*
+	 * Some USB drives don't support REPORT LUNS, even though they
+	 * report a SCSI revision level above 2.  Tell the SCSI layer
+	 * not to issue that command; it will perform a normal sequential
+	 * scan instead.
+	 */
+	starget->no_report_luns = 1;
+
+	/*
+	 * The UFI spec treats the Peripheral Qualifier bits in an
+	 * INQUIRY result as reserved and requires devices to set them
+	 * to 0.  However the SCSI spec requires these bits to be set
+	 * to 3 to indicate when a LUN is not present.
+	 *
+	 * Let the scanning code know if this target merely sets
+	 * Peripheral Device Type to 0x1f to indicate no LUN.
+	 */
+	if (us->subclass == USB_SC_UFI)
+		starget->pdt_1f_for_no_lun = 1;
+
+	return 0;
+}
+
 /* queue a command */
 /* This is always called with scsi_lock(host) held */
 static int queuecommand_lck(struct scsi_cmnd *srb,
@@ -546,6 +552,7 @@ struct scsi_host_template usb_stor_host_template = {
 
 	.slave_alloc =			slave_alloc,
 	.slave_configure =		slave_configure,
+	.target_alloc =			target_alloc,
 
 	/* lots of sg segments can be handled */
 	.sg_tablesize =			SCSI_MAX_SG_CHAIN_SEGMENTS,
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 425df7df2e5..3252a62b31b 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -1787,6 +1787,7 @@ static struct usb_driver sddr09_driver = {
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	sddr09_usb_ids,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };
 
 module_usb_driver(sddr09_driver);
diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c
index e4ca5fcb7cc..c144078065a 100644
--- a/drivers/usb/storage/sddr55.c
+++ b/drivers/usb/storage/sddr55.c
@@ -1006,6 +1006,7 @@ static struct usb_driver sddr55_driver = {
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	sddr55_usb_ids,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };
 
 module_usb_driver(sddr55_driver);
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 1369d259061..fa1ceebc465 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1863,6 +1863,7 @@ static struct usb_driver usbat_driver = {
 	.post_reset =	usb_stor_post_reset,
 	.id_table =	usbat_usb_ids,
 	.soft_unbind =	1,
+	.no_dynamic_id = 1,
 };
 
 module_usb_driver(usbat_driver);
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index a33ead5dce2..8ec8a6e66f5 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -13,7 +13,9 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/usb/storage.h>
+#include <linux/usb/uas.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_dbg.h>
@@ -22,49 +24,6 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_tcq.h>
 
-/* Common header for all IUs */
-struct iu {
-	__u8 iu_id;
-	__u8 rsvd1;
-	__be16 tag;
-};
-
-enum {
-	IU_ID_COMMAND		= 0x01,
-	IU_ID_STATUS		= 0x03,
-	IU_ID_RESPONSE		= 0x04,
-	IU_ID_TASK_MGMT		= 0x05,
-	IU_ID_READ_READY	= 0x06,
-	IU_ID_WRITE_READY	= 0x07,
-};
-
-struct command_iu {
-	__u8 iu_id;
-	__u8 rsvd1;
-	__be16 tag;
-	__u8 prio_attr;
-	__u8 rsvd5;
-	__u8 len;
-	__u8 rsvd7;
-	struct scsi_lun lun;
-	__u8 cdb[16];	/* XXX: Overflow-checking tools may misunderstand */
-};
-
-/*
- * Also used for the Read Ready and Write Ready IUs since they have the
- * same first four bytes
- */
-struct sense_iu {
-	__u8 iu_id;
-	__u8 rsvd1;
-	__be16 tag;
-	__be16 status_qual;
-	__u8 status;
-	__u8 rsvd7[7];
-	__be16 len;
-	__u8 sense[SCSI_SENSE_BUFFERSIZE];
-};
-
 /*
  * The r00-r01c specs define this version of the SENSE IU data structure.
  * It's still in use by several different firmware releases.
@@ -79,18 +38,6 @@ struct sense_iu_old {
 	__u8 sense[SCSI_SENSE_BUFFERSIZE];
 };
 
-enum {
-	CMD_PIPE_ID		= 1,
-	STATUS_PIPE_ID		= 2,
-	DATA_IN_PIPE_ID		= 3,
-	DATA_OUT_PIPE_ID	= 4,
-
-	UAS_SIMPLE_TAG		= 0,
-	UAS_HEAD_TAG		= 1,
-	UAS_ORDERED_TAG		= 2,
-	UAS_ACA			= 4,
-};
-
 struct uas_dev_info {
 	struct usb_interface *intf;
 	struct usb_device *udev;
@@ -98,6 +45,8 @@ struct uas_dev_info {
 	unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
 	unsigned use_streams:1;
 	unsigned uas_sense_old:1;
+	struct scsi_cmnd *cmnd;
+	struct urb *status_urb; /* used only if stream support is available */
 };
 
 enum {
@@ -109,6 +58,9 @@ enum {
 	SUBMIT_DATA_OUT_URB	= (1 << 5),
 	ALLOC_CMD_URB		= (1 << 6),
 	SUBMIT_CMD_URB		= (1 << 7),
+	COMPLETED_DATA_IN	= (1 << 8),
+	COMPLETED_DATA_OUT	= (1 << 9),
+	DATA_COMPLETES_CMD	= (1 << 10),
 };
 
 /* Overrides scsi_pointer */
@@ -116,6 +68,7 @@ struct uas_cmd_info {
 	unsigned int state;
 	unsigned int stream;
 	struct urb *cmd_urb;
+	/* status_urb is used only if stream support isn't available */
 	struct urb *status_urb;
 	struct urb *data_in_urb;
 	struct urb *data_out_urb;
@@ -125,33 +78,43 @@ struct uas_cmd_info {
 /* I hate forward declarations, but I actually have a loop */
 static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 				struct uas_dev_info *devinfo, gfp_t gfp);
+static void uas_do_work(struct work_struct *work);
 
+static DECLARE_WORK(uas_work, uas_do_work);
 static DEFINE_SPINLOCK(uas_work_lock);
 static LIST_HEAD(uas_work_list);
 
 static void uas_do_work(struct work_struct *work)
 {
 	struct uas_cmd_info *cmdinfo;
+	struct uas_cmd_info *temp;
 	struct list_head list;
+	int err;
 
 	spin_lock_irq(&uas_work_lock);
 	list_replace_init(&uas_work_list, &list);
 	spin_unlock_irq(&uas_work_lock);
 
-	list_for_each_entry(cmdinfo, &list, list) {
+	list_for_each_entry_safe(cmdinfo, temp, &list, list) {
 		struct scsi_pointer *scp = (void *)cmdinfo;
 		struct scsi_cmnd *cmnd = container_of(scp,
 							struct scsi_cmnd, SCp);
-		uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO);
+		err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO);
+		if (err) {
+			list_del(&cmdinfo->list);
+			spin_lock_irq(&uas_work_lock);
+			list_add_tail(&cmdinfo->list, &uas_work_list);
+			spin_unlock_irq(&uas_work_lock);
+			schedule_work(&uas_work);
+		}
 	}
 }
 
-static DECLARE_WORK(uas_work, uas_do_work);
-
 static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
 {
 	struct sense_iu *sense_iu = urb->transfer_buffer;
 	struct scsi_device *sdev = cmnd->device;
+	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 
 	if (urb->actual_length > 16) {
 		unsigned len = be16_to_cpup(&sense_iu->len);
@@ -169,16 +132,15 @@ static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
 	}
 
 	cmnd->result = sense_iu->status;
-	if (sdev->current_cmnd)
-		sdev->current_cmnd = NULL;
-	cmnd->scsi_done(cmnd);
-	usb_free_urb(urb);
+	if (!(cmdinfo->state & DATA_COMPLETES_CMD))
+		cmnd->scsi_done(cmnd);
 }
 
 static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd)
 {
 	struct sense_iu_old *sense_iu = urb->transfer_buffer;
 	struct scsi_device *sdev = cmnd->device;
+	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 
 	if (urb->actual_length > 8) {
 		unsigned len = be16_to_cpup(&sense_iu->len) - 2;
@@ -196,10 +158,8 @@ static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd)
 	}
 
 	cmnd->result = sense_iu->status;
-	if (sdev->current_cmnd)
-		sdev->current_cmnd = NULL;
-	cmnd->scsi_done(cmnd);
-	usb_free_urb(urb);
+	if (!(cmdinfo->state & DATA_COMPLETES_CMD))
+		cmnd->scsi_done(cmnd);
 }
 
 static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
@@ -208,7 +168,7 @@ static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 	int err;
 
-	cmdinfo->state = direction | SUBMIT_STATUS_URB;
+	cmdinfo->state = direction;
 	err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
 	if (err) {
 		spin_lock(&uas_work_lock);
@@ -221,27 +181,61 @@ static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
 static void uas_stat_cmplt(struct urb *urb)
 {
 	struct iu *iu = urb->transfer_buffer;
-	struct scsi_device *sdev = urb->context;
-	struct uas_dev_info *devinfo = sdev->hostdata;
+	struct Scsi_Host *shost = urb->context;
+	struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
 	struct scsi_cmnd *cmnd;
+	struct uas_cmd_info *cmdinfo;
 	u16 tag;
+	int ret;
 
 	if (urb->status) {
 		dev_err(&urb->dev->dev, "URB BAD STATUS %d\n", urb->status);
-		usb_free_urb(urb);
+		if (devinfo->use_streams)
+			usb_free_urb(urb);
 		return;
 	}
 
 	tag = be16_to_cpup(&iu->tag) - 1;
-	if (sdev->current_cmnd)
-		cmnd = sdev->current_cmnd;
+	if (tag == 0)
+		cmnd = devinfo->cmnd;
 	else
-		cmnd = scsi_find_tag(sdev, tag);
-	if (!cmnd)
+		cmnd = scsi_host_find_tag(shost, tag - 1);
+	if (!cmnd) {
+		if (devinfo->use_streams) {
+			usb_free_urb(urb);
+			return;
+		}
+		ret = usb_submit_urb(urb, GFP_ATOMIC);
+		if (ret)
+			dev_err(&urb->dev->dev, "failed submit status urb\n");
 		return;
+	}
+	cmdinfo = (void *)&cmnd->SCp;
 
 	switch (iu->iu_id) {
 	case IU_ID_STATUS:
+		if (devinfo->cmnd == cmnd)
+			devinfo->cmnd = NULL;
+
+		if (!(cmdinfo->state & COMPLETED_DATA_IN) &&
+				cmdinfo->data_in_urb) {
+		       if (devinfo->use_streams) {
+			       cmdinfo->state |= DATA_COMPLETES_CMD;
+			       usb_unlink_urb(cmdinfo->data_in_urb);
+		       } else {
+			       usb_free_urb(cmdinfo->data_in_urb);
+		       }
+		}
+		if (!(cmdinfo->state & COMPLETED_DATA_OUT) &&
+				cmdinfo->data_out_urb) {
+			if (devinfo->use_streams) {
+				cmdinfo->state |= DATA_COMPLETES_CMD;
+				usb_unlink_urb(cmdinfo->data_in_urb);
+			} else {
+				usb_free_urb(cmdinfo->data_out_urb);
+			}
+		}
+
 		if (urb->actual_length < 16)
 			devinfo->uas_sense_old = 1;
 		if (devinfo->uas_sense_old)
@@ -259,29 +253,70 @@ static void uas_stat_cmplt(struct urb *urb)
 		scmd_printk(KERN_ERR, cmnd,
 			"Bogus IU (%d) received on status pipe\n", iu->iu_id);
 	}
+
+	if (devinfo->use_streams) {
+		usb_free_urb(urb);
+		return;
+	}
+
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret)
+		dev_err(&urb->dev->dev, "failed submit status urb\n");
 }
 
-static void uas_data_cmplt(struct urb *urb)
+static void uas_data_out_cmplt(struct urb *urb)
 {
-	struct scsi_data_buffer *sdb = urb->context;
+	struct scsi_cmnd *cmnd = urb->context;
+	struct scsi_data_buffer *sdb = scsi_out(cmnd);
+	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+
+	cmdinfo->state |= COMPLETED_DATA_OUT;
+
 	sdb->resid = sdb->length - urb->actual_length;
 	usb_free_urb(urb);
+
+	if (cmdinfo->state & DATA_COMPLETES_CMD)
+		cmnd->scsi_done(cmnd);
+}
+
+static void uas_data_in_cmplt(struct urb *urb)
+{
+	struct scsi_cmnd *cmnd = urb->context;
+	struct scsi_data_buffer *sdb = scsi_in(cmnd);
+	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+
+	cmdinfo->state |= COMPLETED_DATA_IN;
+
+	sdb->resid = sdb->length - urb->actual_length;
+	usb_free_urb(urb);
+
+	if (cmdinfo->state & DATA_COMPLETES_CMD)
+		cmnd->scsi_done(cmnd);
 }
 
 static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
-				unsigned int pipe, u16 stream_id,
-				struct scsi_data_buffer *sdb,
-				enum dma_data_direction dir)
+		unsigned int pipe, struct scsi_cmnd *cmnd,
+		enum dma_data_direction dir)
 {
+	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 	struct usb_device *udev = devinfo->udev;
 	struct urb *urb = usb_alloc_urb(0, gfp);
+	struct scsi_data_buffer *sdb;
+	usb_complete_t complete_fn;
+	u16 stream_id = cmdinfo->stream;
 
 	if (!urb)
 		goto out;
-	usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, uas_data_cmplt,
-									sdb);
-	if (devinfo->use_streams)
-		urb->stream_id = stream_id;
+	if (dir == DMA_FROM_DEVICE) {
+		sdb = scsi_in(cmnd);
+		complete_fn = uas_data_in_cmplt;
+	} else {
+		sdb = scsi_out(cmnd);
+		complete_fn = uas_data_out_cmplt;
+	}
+	usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
+			complete_fn, cmnd);
+	urb->stream_id = stream_id;
 	urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
 	urb->sg = sdb->table.sgl;
  out:
@@ -289,7 +324,7 @@ static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 }
 
 static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
-					struct scsi_cmnd *cmnd, u16 stream_id)
+		struct Scsi_Host *shost, u16 stream_id)
 {
 	struct usb_device *udev = devinfo->udev;
 	struct urb *urb = usb_alloc_urb(0, gfp);
@@ -303,7 +338,7 @@ static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 		goto free;
 
 	usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
-						uas_stat_cmplt, cmnd->device);
+						uas_stat_cmplt, shost);
 	urb->stream_id = stream_id;
 	urb->transfer_flags |= URB_FREE_BUFFER;
  out:
@@ -334,7 +369,10 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 		goto free;
 
 	iu->iu_id = IU_ID_COMMAND;
-	iu->tag = cpu_to_be16(stream_id);
+	if (blk_rq_tagged(cmnd->request))
+		iu->tag = cpu_to_be16(cmnd->request->tag + 2);
+	else
+		iu->tag = cpu_to_be16(1);
 	iu->prio_attr = UAS_SIMPLE_TAG;
 	iu->len = len;
 	int_to_scsilun(sdev->lun, &iu->lun);
@@ -362,8 +400,8 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 
 	if (cmdinfo->state & ALLOC_STATUS_URB) {
-		cmdinfo->status_urb = uas_alloc_sense_urb(devinfo, gfp, cmnd,
-							  cmdinfo->stream);
+		cmdinfo->status_urb = uas_alloc_sense_urb(devinfo, gfp,
+				cmnd->device->host, cmdinfo->stream);
 		if (!cmdinfo->status_urb)
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		cmdinfo->state &= ~ALLOC_STATUS_URB;
@@ -380,8 +418,8 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 
 	if (cmdinfo->state & ALLOC_DATA_IN_URB) {
 		cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp,
-					devinfo->data_in_pipe, cmdinfo->stream,
-					scsi_in(cmnd), DMA_FROM_DEVICE);
+					devinfo->data_in_pipe, cmnd,
+					DMA_FROM_DEVICE);
 		if (!cmdinfo->data_in_urb)
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		cmdinfo->state &= ~ALLOC_DATA_IN_URB;
@@ -398,8 +436,8 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 
 	if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
 		cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp,
-					devinfo->data_out_pipe, cmdinfo->stream,
-					scsi_out(cmnd), DMA_TO_DEVICE);
+					devinfo->data_out_pipe, cmnd,
+					DMA_TO_DEVICE);
 		if (!cmdinfo->data_out_urb)
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
@@ -444,13 +482,13 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 
 	BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
 
-	if (!cmdinfo->status_urb && sdev->current_cmnd)
+	if (devinfo->cmnd)
 		return SCSI_MLQUEUE_DEVICE_BUSY;
 
 	if (blk_rq_tagged(cmnd->request)) {
-		cmdinfo->stream = cmnd->request->tag + 1;
+		cmdinfo->stream = cmnd->request->tag + 2;
 	} else {
-		sdev->current_cmnd = cmnd;
+		devinfo->cmnd = cmnd;
 		cmdinfo->stream = 1;
 	}
 
@@ -472,7 +510,8 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 	}
 
 	if (!devinfo->use_streams) {
-		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
+		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB |
+				ALLOC_STATUS_URB | SUBMIT_STATUS_URB);
 		cmdinfo->stream = 0;
 	}
 
@@ -551,7 +590,7 @@ static int uas_slave_configure(struct scsi_device *sdev)
 {
 	struct uas_dev_info *devinfo = sdev->hostdata;
 	scsi_set_tag_type(sdev, MSG_ORDERED_TAG);
-	scsi_activate_tcq(sdev, devinfo->qdepth - 1);
+	scsi_activate_tcq(sdev, devinfo->qdepth - 2);
 	return 0;
 }
 
@@ -589,22 +628,34 @@ static int uas_is_interface(struct usb_host_interface *intf)
 		intf->desc.bInterfaceProtocol == USB_PR_UAS);
 }
 
+static int uas_isnt_supported(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	dev_warn(&udev->dev, "The driver for the USB controller %s does not "
+			"support scatter-gather which is\n",
+			hcd->driver->description);
+	dev_warn(&udev->dev, "required by the UAS driver. Please try an"
+			"alternative USB controller if you wish to use UAS.\n");
+	return -ENODEV;
+}
+
 static int uas_switch_interface(struct usb_device *udev,
 						struct usb_interface *intf)
 {
 	int i;
-
-	if (uas_is_interface(intf->cur_altsetting))
-		return 0;
+	int sg_supported = udev->bus->sg_tablesize != 0;
 
 	for (i = 0; i < intf->num_altsetting; i++) {
 		struct usb_host_interface *alt = &intf->altsetting[i];
-		if (alt == intf->cur_altsetting)
-			continue;
-		if (uas_is_interface(alt))
+
+		if (uas_is_interface(alt)) {
+			if (!sg_supported)
+				return uas_isnt_supported(udev);
 			return usb_set_interface(udev,
 						alt->desc.bInterfaceNumber,
 						alt->desc.bAlternateSetting);
+		}
 	}
 
 	return -ENODEV;
@@ -619,6 +670,7 @@ static void uas_configure_endpoints(struct uas_dev_info *devinfo)
 	unsigned i, n_endpoints = intf->cur_altsetting->desc.bNumEndpoints;
 
 	devinfo->uas_sense_old = 0;
+	devinfo->cmnd = NULL;
 
 	for (i = 0; i < n_endpoints; i++) {
 		unsigned char *extra = endpoint[i].extra;
@@ -670,6 +722,40 @@ static void uas_configure_endpoints(struct uas_dev_info *devinfo)
 	}
 }
 
+static int uas_alloc_status_urb(struct uas_dev_info *devinfo,
+		struct Scsi_Host *shost)
+{
+	if (devinfo->use_streams) {
+		devinfo->status_urb = NULL;
+		return 0;
+	}
+
+	devinfo->status_urb = uas_alloc_sense_urb(devinfo, GFP_KERNEL,
+			shost, 0);
+	if (!devinfo->status_urb)
+		goto err_s_urb;
+
+	if (usb_submit_urb(devinfo->status_urb, GFP_KERNEL))
+		goto err_submit_urb;
+
+	return 0;
+err_submit_urb:
+	usb_free_urb(devinfo->status_urb);
+err_s_urb:
+	return -ENOMEM;
+}
+
+static void uas_free_streams(struct uas_dev_info *devinfo)
+{
+	struct usb_device *udev = devinfo->udev;
+	struct usb_host_endpoint *eps[3];
+
+	eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
+	eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
+	eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
+	usb_free_streams(devinfo->intf, eps, 3, GFP_KERNEL);
+}
+
 /*
  * XXX: What I'd like to do here is register a SCSI host for each USB host in
  * the system.  Follow usb-storage's design of registering a SCSI host for
@@ -699,18 +785,33 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	shost->max_id = 1;
 	shost->sg_tablesize = udev->bus->sg_tablesize;
 
-	result = scsi_add_host(shost, &intf->dev);
+	devinfo->intf = intf;
+	devinfo->udev = udev;
+	uas_configure_endpoints(devinfo);
+
+	result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2);
 	if (result)
 		goto free;
+
+	result = scsi_add_host(shost, &intf->dev);
+	if (result)
+		goto deconfig_eps;
+
 	shost->hostdata[0] = (unsigned long)devinfo;
 
-	devinfo->intf = intf;
-	devinfo->udev = udev;
-	uas_configure_endpoints(devinfo);
+	result = uas_alloc_status_urb(devinfo, shost);
+	if (result)
+		goto err_alloc_status;
 
 	scsi_scan_host(shost);
 	usb_set_intfdata(intf, shost);
 	return result;
+
+err_alloc_status:
+	scsi_remove_host(shost);
+	shost = NULL;
+deconfig_eps:
+	uas_free_streams(devinfo);
  free:
 	kfree(devinfo);
 	if (shost)
@@ -732,18 +833,13 @@ static int uas_post_reset(struct usb_interface *intf)
 
 static void uas_disconnect(struct usb_interface *intf)
 {
-	struct usb_device *udev = interface_to_usbdev(intf);
-	struct usb_host_endpoint *eps[3];
 	struct Scsi_Host *shost = usb_get_intfdata(intf);
 	struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
 
 	scsi_remove_host(shost);
-
-	eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
-	eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
-	eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
-	usb_free_streams(intf, eps, 3, GFP_KERNEL);
-
+	usb_kill_urb(devinfo->status_urb);
+	usb_free_urb(devinfo->status_urb);
+	uas_free_streams(devinfo);
 	kfree(devinfo);
 }
 
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index db51ba16dc0..c18538e4a6d 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -125,6 +125,9 @@ static struct us_unusual_dev us_unusual_dev_list[] = {
 	{ }		/* Terminating entry */
 };
 
+static struct us_unusual_dev for_dynamic_ids =
+		USUAL_DEV(USB_SC_SCSI, USB_PR_BULK, 0);
+
 #undef UNUSUAL_DEV
 #undef COMPLIANT_DEV
 #undef USUAL_DEV
@@ -999,8 +1002,10 @@ EXPORT_SYMBOL_GPL(usb_stor_disconnect);
 static int storage_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id)
 {
+	struct us_unusual_dev *unusual_dev;
 	struct us_data *us;
 	int result;
+	int size;
 
 	/*
 	 * If libusual is configured, let it decide whether a standard
@@ -1019,8 +1024,19 @@ static int storage_probe(struct usb_interface *intf,
 	 * table, so we use the index of the id entry to find the
 	 * corresponding unusual_devs entry.
 	 */
-	result = usb_stor_probe1(&us, intf, id,
-			(id - usb_storage_usb_ids) + us_unusual_dev_list);
+
+	size = ARRAY_SIZE(us_unusual_dev_list);
+	if (id >= usb_storage_usb_ids && id < usb_storage_usb_ids + size) {
+		unusual_dev = (id - usb_storage_usb_ids) + us_unusual_dev_list;
+	} else {
+		unusual_dev = &for_dynamic_ids;
+
+		US_DEBUGP("%s %s 0x%04x 0x%04x\n", "Use Bulk-Only transport",
+			"with the Transparent SCSI protocol for dynamic id:",
+			id->idVendor, id->idProduct);
+	}
+
+	result = usb_stor_probe1(&us, intf, id, unusual_dev);
 	if (result)
 		return result;
 
@@ -1046,7 +1062,6 @@ static struct usb_driver usb_storage_driver = {
 	.id_table =	usb_storage_usb_ids,
 	.supports_autosuspend = 1,
 	.soft_unbind =	1,
-	.no_dynamic_id = 1,
 };
 
 static int __init usb_stor_init(void)