summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-05-05 17:36:20 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-05-05 17:36:20 -0700
commitd7ab7302f970a254997687a1cdede421a5635c68 (patch)
tree71341b72e81c8e031b98e8115c51682427192798 /drivers
parent01227a889ed56ae53aeebb9f93be9d54dd8b2de8 (diff)
parent99f4c6b66a9ae362d21e6df95d04bc74e04d285e (diff)
Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next
Pull MFD update from Samuel Ortiz: "For 3.10 we have a few new MFD drivers for: - The ChromeOS embedded controller which provides keyboard, battery and power management services. This controller is accessible through i2c or SPI. - Silicon Laboratories 476x controller, providing access to their FM chipset and their audio codec. - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based reader. - Nokia's Tahvo power button and watchdog device. This device is very similar to Retu and is thus supported by the same code base. - STMicroelectronics STMPE1801, a keyboard and GPIO controller supported by the stmpe driver. - ST-Ericsson AB8540 and AB8505 power management and voltage converter controllers through the existing ab8500 code. Some other drivers got cleaned up or improved. In particular: - The Linaro/STE guys got the ab8500 driver in sync with their internal code through a series of optimizations, fixes and improvements. - The AS3711 and OMAP USB drivers now have DT support. - The arizona clock and interrupt handling code got improved. - The wm5102 register patch and boot mechanism also got improved." * tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits) mfd: si476x: Don't use 0bNNN mfd: vexpress: Handle pending config transactions mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly mfd: si476x: Fix i2c warning mfd: si476x: Add header files and Kbuild plumbing mfd: si476x: Add chip properties handling code mfd: si476x: Add the bulk of the core driver mfd: si476x: Add commands abstraction layer mfd: rtsx: Support RTS5249 mfd: retu: Add Tahvo support mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus mfd: wm8994: Add some OF properties mfd: wm8994: Add device ID data to WM8994 OF device IDs input: Export matrix_keypad_parse_of_params() mfd: tps65090: Add compatible string for charger subnode mfd: db8500-prcmu: Support platform dependant device selection mfd: syscon: Fix warnings when printing resource_size_t of: Add stub of_get_parent for non-OF builds mfd: omap-usb-tll: Convert to devm_ioremap_resource() mfd: omap-usb-host: Convert to devm_ioremap_resource() ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/gpio/gpio-ucb1400.c19
-rw-r--r--drivers/input/keyboard/Kconfig12
-rw-r--r--drivers/input/keyboard/Makefile1
-rw-r--r--drivers/input/keyboard/cros_ec_keyb.c334
-rw-r--r--drivers/input/keyboard/lpc32xx-keys.c11
-rw-r--r--drivers/input/keyboard/omap4-keypad.c16
-rw-r--r--drivers/input/keyboard/tca8418_keypad.c7
-rw-r--r--drivers/input/matrix-keymap.c20
-rw-r--r--drivers/mfd/88pm860x-core.c12
-rw-r--r--drivers/mfd/Kconfig1444
-rw-r--r--drivers/mfd/Makefile9
-rw-r--r--drivers/mfd/aat2870-core.c20
-rw-r--r--drivers/mfd/ab3100-otp.c14
-rw-r--r--drivers/mfd/ab8500-core.c28
-rw-r--r--drivers/mfd/ab8500-gpadc.c2
-rw-r--r--drivers/mfd/ab8500-sysctrl.c2
-rw-r--r--drivers/mfd/adp5520.c20
-rw-r--r--drivers/mfd/arizona-core.c267
-rw-r--r--drivers/mfd/arizona-irq.c106
-rw-r--r--drivers/mfd/arizona-spi.c2
-rw-r--r--drivers/mfd/as3711.c27
-rw-r--r--drivers/mfd/cros_ec.c196
-rw-r--r--drivers/mfd/cros_ec_i2c.c201
-rw-r--r--drivers/mfd/cros_ec_spi.c375
-rw-r--r--drivers/mfd/da903x.c19
-rw-r--r--drivers/mfd/da9052-spi.c4
-rw-r--r--drivers/mfd/da9055-core.c2
-rw-r--r--drivers/mfd/davinci_voicecodec.c12
-rw-r--r--drivers/mfd/db8500-prcmu.c72
-rw-r--r--drivers/mfd/ezx-pcap.c21
-rw-r--r--drivers/mfd/htc-pasic3.c13
-rw-r--r--drivers/mfd/intel_msic.c10
-rw-r--r--drivers/mfd/lm3533-core.c8
-rw-r--r--drivers/mfd/max77686.c2
-rw-r--r--drivers/mfd/mc13xxx-spi.c6
-rw-r--r--drivers/mfd/omap-usb-host.c209
-rw-r--r--drivers/mfd/omap-usb-tll.c219
-rw-r--r--drivers/mfd/omap-usb.h5
-rw-r--r--drivers/mfd/palmas.c7
-rw-r--r--drivers/mfd/retu-mfd.c85
-rw-r--r--drivers/mfd/rts5249.c241
-rw-r--r--drivers/mfd/rtsx_pcr.c11
-rw-r--r--drivers/mfd/rtsx_pcr.h1
-rw-r--r--drivers/mfd/si476x-cmd.c1553
-rw-r--r--drivers/mfd/si476x-i2c.c886
-rw-r--r--drivers/mfd/si476x-prop.c241
-rw-r--r--drivers/mfd/sta2x11-mfd.c11
-rw-r--r--drivers/mfd/stmpe-i2c.c1
-rw-r--r--drivers/mfd/stmpe-spi.c2
-rw-r--r--drivers/mfd/stmpe.c105
-rw-r--r--drivers/mfd/stmpe.h49
-rw-r--r--drivers/mfd/syscon.c80
-rw-r--r--drivers/mfd/tc3589x.c21
-rw-r--r--drivers/mfd/tps65090.c11
-rw-r--r--drivers/mfd/twl4030-madc.c14
-rw-r--r--drivers/mfd/twl6040.c31
-rw-r--r--drivers/mfd/ucb1400_core.c5
-rw-r--r--drivers/mfd/vexpress-config.c35
-rw-r--r--drivers/mfd/vexpress-sysreg.c4
-rw-r--r--drivers/mfd/wm5102-tables.c56
-rw-r--r--drivers/mfd/wm831x-spi.c6
-rw-r--r--drivers/mfd/wm8994-core.c88
-rw-r--r--drivers/power/rx51_battery.c1
63 files changed, 5998 insertions, 1294 deletions
diff --git a/drivers/gpio/gpio-ucb1400.c b/drivers/gpio/gpio-ucb1400.c
index 26405efe0f9..6d0feb234d3 100644
--- a/drivers/gpio/gpio-ucb1400.c
+++ b/drivers/gpio/gpio-ucb1400.c
@@ -12,8 +12,6 @@
#include <linux/module.h>
#include <linux/ucb1400.h>
-struct ucb1400_gpio_data *ucbdata;
-
static int ucb1400_gpio_dir_in(struct gpio_chip *gc, unsigned off)
{
struct ucb1400_gpio *gpio;
@@ -50,7 +48,7 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
struct ucb1400_gpio *ucb = dev->dev.platform_data;
int err = 0;
- if (!(ucbdata && ucbdata->gpio_offset)) {
+ if (!(ucb && ucb->gpio_offset)) {
err = -EINVAL;
goto err;
}
@@ -58,7 +56,7 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
platform_set_drvdata(dev, ucb);
ucb->gc.label = "ucb1400_gpio";
- ucb->gc.base = ucbdata->gpio_offset;
+ ucb->gc.base = ucb->gpio_offset;
ucb->gc.ngpio = 10;
ucb->gc.owner = THIS_MODULE;
@@ -72,8 +70,8 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
if (err)
goto err;
- if (ucbdata && ucbdata->gpio_setup)
- err = ucbdata->gpio_setup(&dev->dev, ucb->gc.ngpio);
+ if (ucb && ucb->gpio_setup)
+ err = ucb->gpio_setup(&dev->dev, ucb->gc.ngpio);
err:
return err;
@@ -85,8 +83,8 @@ static int ucb1400_gpio_remove(struct platform_device *dev)
int err = 0;
struct ucb1400_gpio *ucb = platform_get_drvdata(dev);
- if (ucbdata && ucbdata->gpio_teardown) {
- err = ucbdata->gpio_teardown(&dev->dev, ucb->gc.ngpio);
+ if (ucb && ucb->gpio_teardown) {
+ err = ucb->gpio_teardown(&dev->dev, ucb->gc.ngpio);
if (err)
return err;
}
@@ -103,11 +101,6 @@ static struct platform_driver ucb1400_gpio_driver = {
},
};
-void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data)
-{
- ucbdata = data;
-}
-
module_platform_driver(ucb1400_gpio_driver);
MODULE_DESCRIPTION("Philips UCB1400 GPIO driver");
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index ac050066700..6a195d5e90f 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -628,4 +628,16 @@ config KEYBOARD_W90P910
To compile this driver as a module, choose M here: the
module will be called w90p910_keypad.
+config KEYBOARD_CROS_EC
+ tristate "ChromeOS EC keyboard"
+ select INPUT_MATRIXKMAP
+ depends on MFD_CROS_EC
+ help
+ Say Y here to enable the matrix keyboard used by ChromeOS devices
+ and implemented on the ChromeOS EC. You must enable one bus option
+ (MFD_CROS_EC_I2C or MFD_CROS_EC_SPI) to use this.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cros_ec_keyb.
+
endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 49b16453d00..0c43e8cf8d0 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o
obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
+obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o
obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS) += goldfish_events.o
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
new file mode 100644
index 00000000000..49557f27bfa
--- /dev/null
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -0,0 +1,334 @@
+/*
+ * ChromeOS EC keyboard driver
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This driver uses the Chrome OS EC byte-level message-based protocol for
+ * communicating the keyboard state (which keys are pressed) from a keyboard EC
+ * to the AP over some bus (such as i2c, lpc, spi). The EC does debouncing,
+ * but everything else (including deghosting) is done here. The main
+ * motivation for this is to keep the EC firmware as simple as possible, since
+ * it cannot be easily upgraded and EC flash/IRAM space is relatively
+ * expensive.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+
+/*
+ * @rows: Number of rows in the keypad
+ * @cols: Number of columns in the keypad
+ * @row_shift: log2 or number of rows, rounded up
+ * @keymap_data: Matrix keymap data used to convert to keyscan values
+ * @ghost_filter: true to enable the matrix key-ghosting filter
+ * @dev: Device pointer
+ * @idev: Input device
+ * @ec: Top level ChromeOS device to use to talk to EC
+ * @event_notifier: interrupt event notifier for transport devices
+ */
+struct cros_ec_keyb {
+ unsigned int rows;
+ unsigned int cols;
+ int row_shift;
+ const struct matrix_keymap_data *keymap_data;
+ bool ghost_filter;
+
+ struct device *dev;
+ struct input_dev *idev;
+ struct cros_ec_device *ec;
+ struct notifier_block notifier;
+};
+
+
+static bool cros_ec_keyb_row_has_ghosting(struct cros_ec_keyb *ckdev,
+ uint8_t *buf, int row)
+{
+ int pressed_in_row = 0;
+ int row_has_teeth = 0;
+ int col, mask;
+
+ mask = 1 << row;
+ for (col = 0; col < ckdev->cols; col++) {
+ if (buf[col] & mask) {
+ pressed_in_row++;
+ row_has_teeth |= buf[col] & ~mask;
+ if (pressed_in_row > 1 && row_has_teeth) {
+ /* ghosting */
+ dev_dbg(ckdev->dev,
+ "ghost found at: r%d c%d, pressed %d, teeth 0x%x\n",
+ row, col, pressed_in_row,
+ row_has_teeth);
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+/*
+ * Returns true when there is at least one combination of pressed keys that
+ * results in ghosting.
+ */
+static bool cros_ec_keyb_has_ghosting(struct cros_ec_keyb *ckdev, uint8_t *buf)
+{
+ int row;
+
+ /*
+ * Ghosting happens if for any pressed key X there are other keys
+ * pressed both in the same row and column of X as, for instance,
+ * in the following diagram:
+ *
+ * . . Y . g .
+ * . . . . . .
+ * . . . . . .
+ * . . X . Z .
+ *
+ * In this case only X, Y, and Z are pressed, but g appears to be
+ * pressed too (see Wikipedia).
+ *
+ * We can detect ghosting in a single pass (*) over the keyboard state
+ * by maintaining two arrays. pressed_in_row counts how many pressed
+ * keys we have found in a row. row_has_teeth is true if any of the
+ * pressed keys for this row has other pressed keys in its column. If
+ * at any point of the scan we find that a row has multiple pressed
+ * keys, and at least one of them is at the intersection with a column
+ * with multiple pressed keys, we're sure there is ghosting.
+ * Conversely, if there is ghosting, we will detect such situation for
+ * at least one key during the pass.
+ *
+ * (*) This looks linear in the number of keys, but it's not. We can
+ * cheat because the number of rows is small.
+ */
+ for (row = 0; row < ckdev->rows; row++)
+ if (cros_ec_keyb_row_has_ghosting(ckdev, buf, row))
+ return true;
+
+ return false;
+}
+
+/*
+ * Compares the new keyboard state to the old one and produces key
+ * press/release events accordingly. The keyboard state is 13 bytes (one byte
+ * per column)
+ */
+static void cros_ec_keyb_process(struct cros_ec_keyb *ckdev,
+ uint8_t *kb_state, int len)
+{
+ struct input_dev *idev = ckdev->idev;
+ int col, row;
+ int new_state;
+ int num_cols;
+
+ num_cols = len;
+
+ if (ckdev->ghost_filter && cros_ec_keyb_has_ghosting(ckdev, kb_state)) {
+ /*
+ * Simple-minded solution: ignore this state. The obvious
+ * improvement is to only ignore changes to keys involved in
+ * the ghosting, but process the other changes.
+ */
+ dev_dbg(ckdev->dev, "ghosting found\n");
+ return;
+ }
+
+ for (col = 0; col < ckdev->cols; col++) {
+ for (row = 0; row < ckdev->rows; row++) {
+ int pos = MATRIX_SCAN_CODE(row, col, ckdev->row_shift);
+ const unsigned short *keycodes = idev->keycode;
+ int code;
+
+ code = keycodes[pos];
+ new_state = kb_state[col] & (1 << row);
+ if (!!new_state != test_bit(code, idev->key)) {
+ dev_dbg(ckdev->dev,
+ "changed: [r%d c%d]: byte %02x\n",
+ row, col, new_state);
+
+ input_report_key(idev, code, new_state);
+ }
+ }
+ }
+ input_sync(ckdev->idev);
+}
+
+static int cros_ec_keyb_open(struct input_dev *dev)
+{
+ struct cros_ec_keyb *ckdev = input_get_drvdata(dev);
+
+ return blocking_notifier_chain_register(&ckdev->ec->event_notifier,
+ &ckdev->notifier);
+}
+
+static void cros_ec_keyb_close(struct input_dev *dev)
+{
+ struct cros_ec_keyb *ckdev = input_get_drvdata(dev);
+
+ blocking_notifier_chain_unregister(&ckdev->ec->event_notifier,
+ &ckdev->notifier);
+}
+
+static int cros_ec_keyb_get_state(struct cros_ec_keyb *ckdev, uint8_t *kb_state)
+{
+ return ckdev->ec->command_recv(ckdev->ec, EC_CMD_MKBP_STATE,
+ kb_state, ckdev->cols);
+}
+
+static int cros_ec_keyb_work(struct notifier_block *nb,
+ unsigned long state, void *_notify)
+{
+ int ret;
+ struct cros_ec_keyb *ckdev = container_of(nb, struct cros_ec_keyb,
+ notifier);
+ uint8_t kb_state[ckdev->cols];
+
+ ret = cros_ec_keyb_get_state(ckdev, kb_state);
+ if (ret >= 0)
+ cros_ec_keyb_process(ckdev, kb_state, ret);
+
+ return NOTIFY_DONE;
+}
+
+/* Clear any keys in the buffer */
+static void cros_ec_keyb_clear_keyboard(struct cros_ec_keyb *ckdev)
+{
+ uint8_t old_state[ckdev->cols];
+ uint8_t new_state[ckdev->cols];
+ unsigned long duration;
+ int i, ret;
+
+ /*
+ * Keep reading until we see that the scan state does not change.
+ * That indicates that we are done.
+ *
+ * Assume that the EC keyscan buffer is at most 32 deep.
+ */
+ duration = jiffies;
+ ret = cros_ec_keyb_get_state(ckdev, new_state);
+ for (i = 1; !ret && i < 32; i++) {
+ memcpy(old_state, new_state, sizeof(old_state));
+ ret = cros_ec_keyb_get_state(ckdev, new_state);
+ if (0 == memcmp(old_state, new_state, sizeof(old_state)))
+ break;
+ }
+ duration = jiffies - duration;
+ dev_info(ckdev->dev, "Discarded %d keyscan(s) in %dus\n", i,
+ jiffies_to_usecs(duration));
+}
+
+static int cros_ec_keyb_probe(struct platform_device *pdev)
+{
+ struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = ec->dev;
+ struct cros_ec_keyb *ckdev;
+ struct input_dev *idev;
+ struct device_node *np;
+ int err;
+
+ np = pdev->dev.of_node;
+ if (!np)
+ return -ENODEV;
+
+ ckdev = devm_kzalloc(&pdev->dev, sizeof(*ckdev), GFP_KERNEL);
+ if (!ckdev)
+ return -ENOMEM;
+ err = matrix_keypad_parse_of_params(&pdev->dev, &ckdev->rows,
+ &ckdev->cols);
+ if (err)
+ return err;
+
+ idev = devm_input_allocate_device(&pdev->dev);
+ if (!idev)
+ return -ENOMEM;
+
+ ckdev->ec = ec;
+ ckdev->notifier.notifier_call = cros_ec_keyb_work;
+ ckdev->dev = dev;
+ dev_set_drvdata(&pdev->dev, ckdev);
+
+ idev->name = ec->ec_name;
+ idev->phys = ec->phys_name;
+ __set_bit(EV_REP, idev->evbit);
+
+ idev->id.bustype = BUS_VIRTUAL;
+ idev->id.version = 1;
+ idev->id.product = 0;
+ idev->dev.parent = &pdev->dev;
+ idev->open = cros_ec_keyb_open;
+ idev->close = cros_ec_keyb_close;
+
+ ckdev->ghost_filter = of_property_read_bool(np,
+ "google,needs-ghost-filter");
+
+ err = matrix_keypad_build_keymap(NULL, NULL, ckdev->rows, ckdev->cols,
+ NULL, idev);
+ if (err) {
+ dev_err(dev, "cannot build key matrix\n");
+ return err;
+ }
+
+ ckdev->row_shift = get_count_order(ckdev->cols);
+
+ input_set_capability(idev, EV_MSC, MSC_SCAN);
+ input_set_drvdata(idev, ckdev);
+ ckdev->idev = idev;
+ err = input_register_device(ckdev->idev);
+ if (err) {
+ dev_err(dev, "cannot register input device\n");
+ return err;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cros_ec_keyb_resume(struct device *dev)
+{
+ struct cros_ec_keyb *ckdev = dev_get_drvdata(dev);
+
+ /*
+ * When the EC is not a wake source, then it could not have caused the
+ * resume, so we clear the EC's key scan buffer. If the EC was a
+ * wake source (e.g. the lid is open and the user might press a key to
+ * wake) then the key scan buffer should be preserved.
+ */
+ if (ckdev->ec->was_wake_device)
+ cros_ec_keyb_clear_keyboard(ckdev);
+
+ return 0;
+}
+
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume);
+
+static struct platform_driver cros_ec_keyb_driver = {
+ .probe = cros_ec_keyb_probe,
+ .driver = {
+ .name = "cros-ec-keyb",
+ .pm = &cros_ec_keyb_pm_ops,
+ },
+};
+
+module_platform_driver(cros_ec_keyb_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC keyboard driver");
+MODULE_ALIAS("platform:cros-ec-keyb");
diff --git a/drivers/input/keyboard/lpc32xx-keys.c b/drivers/input/keyboard/lpc32xx-keys.c
index 1b8add6cfb9..42181435fe6 100644
--- a/drivers/input/keyboard/lpc32xx-keys.c
+++ b/drivers/input/keyboard/lpc32xx-keys.c
@@ -144,12 +144,13 @@ static int lpc32xx_parse_dt(struct device *dev,
{
struct device_node *np = dev->of_node;
u32 rows = 0, columns = 0;
+ int err;
- of_property_read_u32(np, "keypad,num-rows", &rows);
- of_property_read_u32(np, "keypad,num-columns", &columns);
- if (!rows || rows != columns) {
- dev_err(dev,
- "rows and columns must be specified and be equal!\n");
+ err = matrix_keypad_parse_of_params(dev, &rows, &columns);
+ if (err)
+ return err;
+ if (rows != columns) {
+ dev_err(dev, "rows and columns must be equal!\n");
return -EINVAL;
}
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index e25b022692c..1b289092f4e 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -215,18 +215,12 @@ static int omap4_keypad_parse_dt(struct device *dev,
struct omap4_keypad *keypad_data)
{
struct device_node *np = dev->of_node;
+ int err;
- if (!np) {
- dev_err(dev, "missing DT data");
- return -EINVAL;
- }
-
- of_property_read_u32(np, "keypad,num-rows", &keypad_data->rows);
- of_property_read_u32(np, "keypad,num-columns", &keypad_data->cols);
- if (!keypad_data->rows || !keypad_data->cols) {
- dev_err(dev, "number of keypad rows/columns not specified\n");
- return -EINVAL;
- }
+ err = matrix_keypad_parse_of_params(dev, &keypad_data->rows,
+ &keypad_data->cols);
+ if (err)
+ return err;
if (of_get_property(np, "linux,input-no-autorepeat", NULL))
keypad_data->no_autorepeat = true;
diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
index a34cc6714e5..55c15304ddb 100644
--- a/drivers/input/keyboard/tca8418_keypad.c
+++ b/drivers/input/keyboard/tca8418_keypad.c
@@ -288,8 +288,11 @@ static int tca8418_keypad_probe(struct i2c_client *client,
irq_is_gpio = pdata->irq_is_gpio;
} else {
struct device_node *np = dev->of_node;
- of_property_read_u32(np, "keypad,num-rows", &rows);
- of_property_read_u32(np, "keypad,num-columns", &cols);
+ int err;
+
+ err = matrix_keypad_parse_of_params(dev, &rows, &cols);
+ if (err)
+ return err;
rep = of_property_read_bool(np, "keypad,autorepeat");
}
diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c
index 3ae496ea5fe..08b61f506db 100644
--- a/drivers/input/matrix-keymap.c
+++ b/drivers/input/matrix-keymap.c
@@ -50,6 +50,26 @@ static bool matrix_keypad_map_key(struct input_dev *input_dev,
}
#ifdef CONFIG_OF
+int matrix_keypad_parse_of_params(struct device *dev,
+ unsigned int *rows, unsigned int *cols)
+{
+ struct device_node *np = dev->of_node;
+
+ if (!np) {
+ dev_err(dev, "missing DT data");
+ return -EINVAL;
+ }
+ of_property_read_u32(np, "keypad,num-rows", rows);
+ of_property_read_u32(np, "keypad,num-columns", cols);
+ if (!*rows || !*cols) {
+ dev_err(dev, "number of keypad rows/columns not specified\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(matrix_keypad_parse_of_params);
+
static int matrix_keypad_parse_of_keymap(const char *propname,
unsigned int rows, unsigned int cols,
struct input_dev *input_dev)
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index 893fc1ba6ea..31ca55548ef 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -1144,17 +1144,15 @@ static int pm860x_probe(struct i2c_client *client,
return -ENOMEM;
ret = pm860x_dt_init(node, &client->dev, pdata);
if (ret)
- goto err;
+ return ret;
} else if (!pdata) {
pr_info("No platform data in %s!\n", __func__);
return -EINVAL;
}
chip = kzalloc(sizeof(struct pm860x_chip), GFP_KERNEL);
- if (chip == NULL) {
- ret = -ENOMEM;
- goto err;
- }
+ if (chip == NULL)
+ return -ENOMEM;
chip->id = verify_addr(client);
chip->regmap = regmap_init_i2c(client, &pm860x_regmap_config);
@@ -1194,10 +1192,6 @@ static int pm860x_probe(struct i2c_client *client,
pm860x_device_init(chip, pdata);
return 0;
-err:
- if (node)
- devm_kfree(&client->dev, pdata);
- return ret;
}
static int pm860x_remove(struct i2c_client *client)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ca86581d02c..d9aed1593e5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -10,19 +10,240 @@ config MFD_CORE
select IRQ_DOMAIN
default n
-config MFD_88PM860X
- bool "Support Marvell 88PM8606/88PM8607"
+config MFD_CS5535
+ tristate "AMD CS5535 and CS5536 southbridge core functions"
+ select MFD_CORE
+ depends on PCI && X86
+ ---help---
+ This is the core driver for CS5535/CS5536 MFD functions. This is
+ necessary for using the board's GPIO and MFGPT functionality.
+
+config MFD_AS3711
+ bool "AMS AS3711"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
depends on I2C=y && GENERIC_HARDIRQS
+ help
+ Support for the AS3711 PMIC from AMS
+
+config PMIC_ADP5520
+ bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
+ depends on I2C=y
+ help
+ Say yes here to add support for Analog Devices AD5520 and ADP5501,
+ Multifunction Power Management IC. This includes
+ the I2C driver and the core APIs _only_, you have to select
+ individual components like LCD backlight, LEDs, GPIOs and Kepad
+ under the corresponding menus.
+
+config MFD_AAT2870_CORE
+ bool "AnalogicTech AAT2870"
+ select MFD_CORE
+ depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
+ help
+ If you say yes here you get support for the AAT2870.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
+config MFD_CROS_EC
+ tristate "ChromeOS Embedded Controller"
+ select MFD_CORE
+ help
+ If you say Y here you get support for the ChromeOS Embedded
+ Controller (EC) providing keyboard, battery and power services.
+ You also ned to enable the driver for the bus you are using. The
+ protocol for talking to the EC is defined by the bus driver.
+
+config MFD_CROS_EC_I2C
+ tristate "ChromeOS Embedded Controller (I2C)"
+ depends on MFD_CROS_EC && I2C
+
+ help
+ If you say Y here, you get support for talking to the ChromeOS
+ EC through an I2C bus. This uses a simple byte-level protocol with
+ a checksum. Failing accesses will be retried three times to
+ improve reliability.
+
+config MFD_CROS_EC_SPI
+ tristate "ChromeOS Embedded Controller (SPI)"
+ depends on MFD_CROS_EC && SPI
+
+ ---help---
+ If you say Y here, you get support for talking to the ChromeOS EC
+ through a SPI bus, using a byte-level protocol. Since the EC's
+ response time cannot be guaranteed, we support ignoring
+ 'pre-amble' bytes before the response actually starts.
+
+config MFD_ASIC3
+ bool "Compaq ASIC3"
+ depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+ select MFD_CORE
+ ---help---
+ This driver supports the ASIC3 multifunction chip found on many
+ PDAs (mainly iPAQ and HTC based ones)
+
+config PMIC_DA903X
+ bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
+ depends on I2C=y
+ help
+ Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
+ ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
+ usually found on PXA processors-based platforms. This includes
+ the I2C driver and the core APIs _only_, you have to select
+ individual components like LCD backlight, voltage regulators,
+ LEDs and battery-charger under the corresponding menus.
+
+config PMIC_DA9052
+ bool
+ select MFD_CORE
+
+config MFD_DA9052_SPI
+ bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI"
+ select REGMAP_SPI
+ select REGMAP_IRQ
+ select PMIC_DA9052
+ depends on SPI_MASTER=y && GENERIC_HARDIRQS
+ help
+ Support for the Dialog Semiconductor DA9052 PMIC
+ when controlled using SPI. This driver provides common support
+ for accessing the device, additional drivers must be enabled in
+ order to use the functionality of the device.
+
+config MFD_DA9052_I2C
+ bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C"
select REGMAP_I2C
+ select REGMAP_IRQ
+ select PMIC_DA9052
+ depends on I2C=y && GENERIC_HARDIRQS
+ help
+ Support for the Dialog Semiconductor DA9052 PMIC
+ when controlled using I2C. This driver provides common support
+ for accessing the device, additional drivers must be enabled in
+ order to use the functionality of the device.
+
+config MFD_DA9055
+ bool "Dialog Semiconductor DA9055 PMIC Support"
+ select REGMAP_I2C
+ select REGMAP_IRQ
select MFD_CORE
+ depends on I2C=y && GENERIC_HARDIRQS
help
- This supports for Marvell 88PM8606/88PM8607 Power Management IC.
- This includes the I2C driver and the core APIs _only_, you have to
- select individual components like voltage regulators, RTC and
- battery-charger under the corresponding menus.
+ Say yes here for support of Dialog Semiconductor DA9055. This is
+ a Power Management IC. This driver provides common support for
+ accessing the device as well as the I2C interface to the chip itself.
+ Additional drivers must be enabled in order to use the functionality
+ of the device.
+
+ This driver can be built as a module. If built as a module it will be
+ called "da9055"
+
+config MFD_MC13783
+ tristate
+
+config MFD_MC13XXX
+ tristate
+ depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
+ select MFD_CORE
+ select MFD_MC13783
+ help
+ Enable support for the Freescale MC13783 and MC13892 PMICs.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
+config MFD_MC13XXX_SPI
+ tristate "Freescale MC13783 and MC13892 SPI interface"
+ depends on SPI_MASTER && GENERIC_HARDIRQS
+ select REGMAP_SPI
+ select MFD_MC13XXX
+ help
+ Select this if your MC13xxx is connected via an SPI bus.
+
+config MFD_MC13XXX_I2C
+ tristate "Freescale MC13892 I2C interface"
+ depends on I2C && GENERIC_HARDIRQS
+ select REGMAP_I2C
+ select MFD_MC13XXX
+ help
+ Select this if your MC13xxx is connected via an I2C bus.
+
+config HTC_EGPIO
+ bool "HTC EGPIO support"
+ depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+ help
+ This driver supports the CPLD egpio chip present on
+ several HTC phones. It provides basic support for input
+ pins, output pins, and irqs.
+
+config HTC_PASIC3
+ tristate "HTC PASIC3 LED/DS1WM chip support"
+ select MFD_CORE
+ depends on GENERIC_HARDIRQS
+ help
+ This core driver provides register access for the LED/DS1WM
+ chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
+ HTC Magician devices, respectively. Actual functionality is
+ handled by the leds-pasic3 and ds1wm drivers.
+
+config HTC_I2CPLD
+ bool "HTC I2C PLD chip support"
+ depends on I2C=y && GPIOLIB
+ help
+ If you say yes here you get support for the supposed CPLD
+ found on omap850 HTC devices like the HTC Wizard and HTC Herald.
+ This device provides input and output GPIOs through an I2C
+ interface to one or more sub-chips.
+
+config LPC_ICH
+ tristate "Intel ICH LPC"
+ depends on PCI && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ The LPC bridge function of the Intel ICH provides support for
+ many functional units. This driver provides needed support for
+ other drivers to control these functions, currently GPIO and
+ watchdog.
+
+config LPC_SCH
+ tristate "Intel SCH LPC"
+ depends on PCI && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ LPC bridge function of the Intel SCH provides support for
+ System Management Bus and General Purpose I/O.
+
+config MFD_INTEL_MSIC
+ bool "Intel MSIC"
+ depends on INTEL_SCU_IPC
+ select MFD_CORE
+ help
+ Select this option to enable access to Intel MSIC (Avatele
+ Passage) chip. This chip embeds audio, battery, GPIO, etc.
+ devices used in Intel Medfield platforms.
+
+config MFD_JANZ_CMODIO
+ tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
+ select MFD_CORE
+ depends on PCI && GENERIC_HARDIRQS
+ help
+ This is the core driver for the Janz CMOD-IO PCI MODULbus
+ carrier board. This device is a PCI to MODULbus bridge which may
+ host many different types of MODULbus daughterboards, including
+ CAN and GPIO controllers.
+
+config MFD_JZ4740_ADC
+ bool "Janz JZ4740 ADC core"
+ select MFD_CORE
+ select GENERIC_IRQ_CHIP
+ depends on MACH_JZ4740
+ help
+ Say yes here if you want support for the ADC unit in the JZ4740 SoC.
+ This driver is necessary for jz4740-battery and jz4740-hwmon driver.
config MFD_88PM800
- tristate "Support Marvell 88PM800"
+ tristate "Marvell 88PM800"
depends on I2C=y && GENERIC_HARDIRQS
select REGMAP_I2C
select REGMAP_IRQ
@@ -34,7 +255,7 @@ config MFD_88PM800
battery-charger under the corresponding menus.
config MFD_88PM805
- tristate "Support Marvell 88PM805"
+ tristate "Marvell 88PM805"
depends on I2C=y && GENERIC_HARDIRQS
select REGMAP_I2C
select REGMAP_IRQ
@@ -45,8 +266,242 @@ config MFD_88PM805
components like codec device, headset/Mic device under the
corresponding menus.
+config MFD_88PM860X
+ bool "Marvell 88PM8606/88PM8607"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select REGMAP_I2C
+ select MFD_CORE
+ help
+ This supports for Marvell 88PM8606/88PM8607 Power Management IC.
+ This includes the I2C driver and the core APIs _only_, you have to
+ select individual components like voltage regulators, RTC and
+ battery-charger under the corresponding menus.
+
+config MFD_MAX77686
+ bool "Maxim Semiconductor MAX77686 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ select IRQ_DOMAIN
+ help
+ Say yes here to support for Maxim Semiconductor MAX77686.
+ This is a Power Management IC with RTC on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
+config MFD_MAX77693
+ bool "Maxim Semiconductor MAX77693 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Say yes here to support for Maxim Semiconductor MAX77693.
+ This is a companion Power Management IC with Flash, Haptic, Charger,
+ and MUIC(Micro USB Interface Controller) controls on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
+config MFD_MAX8907
+ tristate "Maxim Semiconductor MAX8907 PMIC Support"
+ select MFD_CORE
+ depends on I2C=y && GENERIC_HARDIRQS
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ Say yes here to support for Maxim Semiconductor MAX8907. This is
+ a Power Management IC. This driver provides common support for
+ accessing the device; additional drivers must be enabled in order
+ to use the functionality of the device.
+
+config MFD_MAX8925
+ bool "Maxim Semiconductor MAX8925 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ Say yes here to support for Maxim Semiconductor MAX8925. This is
+ a Power Management IC. This driver provides common support for
+ accessing the device, additional drivers must be enabled in order
+ to use the functionality of the device.
+
+config MFD_MAX8997
+ bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select IRQ_DOMAIN
+ help
+ Say yes here to support for Maxim Semiconductor MAX8997/8966.
+ This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
+ MUIC controls on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
+config MFD_MAX8998
+ bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ Say yes here to support for Maxim Semiconductor MAX8998 and
+ National Semiconductor LP3974. This is a Power Management IC.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
+config EZX_PCAP
+ bool "Motorola EZXPCAP Support"
+ depends on GENERIC_HARDIRQS && SPI_MASTER
+ help
+ This enables the PCAP ASIC present on EZX Phones. This is
+ needed for MMC, TouchScreen, Sound, USB, etc..
+
+config MFD_VIPERBOARD
+ tristate "Nano River Technologies Viperboard"
+ select MFD_CORE
+ depends on USB && GENERIC_HARDIRQS
+ default n
+ help
+ Say yes here if you want support for Nano River Technologies
+ Viperboard.
+ There are mfd cell drivers available for i2c master, adc and
+ both gpios found on the board. The spi part does not yet
+ have a driver.
+ You need to select the mfd cell drivers separately.
+ The drivers do not support all features the board exposes.
+
+config MFD_RETU
+ tristate "Nokia Retu and Tahvo multi-function device"
+ select MFD_CORE
+ depends on I2C && GENERIC_HARDIRQS
+ select REGMAP_IRQ
+ help
+ Retu and Tahvo are a multi-function devices found on Nokia
+ Internet Tablets (770, N800 and N810).
+
+config MFD_PCF50633
+ tristate "NXP PCF50633"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say yes here if you have NXP PCF50633 chip on your board.
+ This core driver provides register access and IRQ handling
+ facilities, and registers devices for the various functions
+ so that function-specific drivers can bind to them.
+
+config PCF50633_ADC
+ tristate "NXP PCF50633 ADC"
+ depends on MFD_PCF50633
+ help
+ Say yes here if you want to include support for ADC in the
+ NXP PCF50633 chip.
+
+config PCF50633_GPIO
+ tristate "NXP PCF50633 GPIO"
+ depends on MFD_PCF50633
+ help
+ Say yes here if you want to include support GPIO for pins on
+ the PCF50633 chip.
+
+config UCB1400_CORE
+ tristate "Philips UCB1400 Core driver"
+ depends on AC97_BUS
+ depends on GPIOLIB
+ help
+ This enables support for the Philips UCB1400 core functions.
+ The UCB1400 is an AC97 audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ucb1400_core.
+
+config MFD_PM8XXX
+ tristate
+
+config MFD_PM8921_CORE
+ tristate "Qualcomm PM8921 PMIC chip"
+ depends on SSBI && BROKEN
+ select MFD_CORE
+ select MFD_PM8XXX
+ help
+ If you say yes to this option, support will be included for the
+ built-in PM8921 PMIC chip.
+
+ This is required if your board has a PM8921 and uses its features,
+ such as: MPPs, GPIOs, regulators, interrupts, and PWM.
+
+ Say M here if you want to include support for PM8921 chip as a module.
+ This will build a module called "pm8921-core".
+
+config MFD_PM8XXX_IRQ
+ bool "Qualcomm PM8xxx IRQ features"
+ depends on MFD_PM8XXX
+ default y if MFD_PM8XXX
+ help
+ This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
+
+ This is required to use certain other PM 8xxx features, such as GPIO
+ and MPP.
+
+config MFD_RDC321X
+ tristate "RDC R-321x southbridge"
+ select MFD_CORE
+ depends on PCI && GENERIC_HARDIRQS
+ help
+ Say yes here if you want to have support for the RDC R-321x SoC
+ southbridge which provides access to GPIOs and Watchdog using the
+ southbridge PCI device configuration space.
+
+config MFD_RTSX_PCI
+ tristate "Realtek PCI-E card reader"
+ depends on PCI && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ This supports for Realtek PCI-Express card reader including rts5209,
+ rts5229, rtl8411, etc. Realtek card reader supports access to many
+ types of memory cards, such as Memory Stick, Memory Stick Pro,
+ Secure Digital and MultiMediaCard.
+
+config MFD_RC5T583
+ bool "Ricoh RC5T583 Power Management system device"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Select this option to get support for the RICOH583 Power
+ Management system device.
+ This driver provides common support for accessing the device
+ through i2c interface. The device supports multiple sub-devices
+ like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
+ Additional drivers must be enabled in order to use the
+ different functionality of the device.
+
+config MFD_SEC_CORE
+ bool "SAMSUNG Electronics PMIC Series Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ Support for the Samsung Electronics MFD series.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device
+
+config MFD_SI476X_CORE
+ tristate "Silicon Laboratories 4761/64/68 AM/FM radio."
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ This is the core driver for the SI476x series of AM/FM
+ radio. This MFD driver connects the radio-si476x V4L2 module
+ and the si476x audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called si476x-core.
+
config MFD_SM501
- tristate "Support for Silicon Motion SM501"
+ tristate "Silicon Motion SM501"
---help---
This is the core driver for the Silicon Motion SM501 multimedia
companion chip. This device is a multifunction device which may
@@ -63,46 +518,147 @@ config MFD_SM501_GPIO
lines on the SM501. The platform data is used to supply the
base number for the first GPIO line to register.
-config MFD_RTSX_PCI
- tristate "Support for Realtek PCI-E card reader"
- depends on PCI && GENERIC_HARDIRQS
+config MFD_SMSC
+ bool "SMSC ECE1099 series chips"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the
+ ece1099 chips from SMSC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called smsc.
+
+config ABX500_CORE
+ bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
+ default y if ARCH_U300 || ARCH_U8500
+ help
+ Say yes here if you have the ABX500 Mixed Signal IC family
+ chips. This core driver expose register access functions.
+ Functionality specific drivers using these functions can
+ remain unchanged when IC changes. Binding of the functions to
+ actual register access is done by the IC core driver.
+
+config AB3100_CORE
+ bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
+ depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
select MFD_CORE
+ default y if ARCH_U300
help
- This supports for Realtek PCI-Express card reader including rts5209,
- rts5229, rtl8411, etc. Realtek card reader supports access to many
- types of memory cards, such as Memory Stick, Memory Stick Pro,
- Secure Digital and MultiMediaCard.
+ Select this to enable the AB3100 Mixed Signal IC core
+ functionality. This connects to a AB3100 on the I2C bus
+ and expose a number of symbols needed for dependent devices
+ to read and write registers and subscribe to events from
+ this multi-functional IC. This is needed to use other features
+ of the AB3100 such as battery-backed RTC, charging control,
+ LEDs, vibrator, system power and temperature, power management
+ and ALSA sound.
-config MFD_ASIC3
- bool "Support for Compaq ASIC3"
- depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+config AB3100_OTP
+ tristate "ST-Ericsson AB3100 OTP functions"
+ depends on AB3100_CORE
+ default y if AB3100_CORE
+ help
+ Select this to enable the AB3100 Mixed Signal IC OTP (one-time
+ programmable memory) support. This exposes a sysfs file to read
+ out OTP values.
+
+config AB8500_CORE
+ bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
+ depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
+ select POWER_SUPPLY
select MFD_CORE
- ---help---
- This driver supports the ASIC3 multifunction chip found on many
- PDAs (mainly iPAQ and HTC based ones)
+ select IRQ_DOMAIN
+ help
+ Select this option to enable access to AB8500 power management
+ chip. This connects to U8500 either on the SSP/SPI bus (deprecated
+ since hardware version v1.0) or the I2C bus via PRCMU. It also adds
+ the irq_chip parts for handling the Mixed Signal chip events.
+ This chip embeds various other multimedia funtionalities as well.
-config MFD_DAVINCI_VOICECODEC
- tristate
+config AB8500_DEBUG
+ bool "Enable debug info via debugfs"
+ depends on AB8500_CORE && DEBUG_FS
+ default y if DEBUG_FS
+ help
+ Select this option if you want debug information using the debug
+ filesystem, debugfs.
+
+config AB8500_GPADC
+ bool "ST-Ericsson AB8500 GPADC driver"
+ depends on AB8500_CORE && REGULATOR_AB8500
+ default y
+ help
+ AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
+
+config MFD_DB8500_PRCMU
+ bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
+ depends on UX500_SOC_DB8500
select MFD_CORE
+ help
+ Select this option to enable support for the DB8500 Power Reset
+ and Control Management Unit. This is basically an autonomous
+ system controller running an XP70 microprocessor, which is accessed
+ through a register map.
-config MFD_DM355EVM_MSP
- bool "DaVinci DM355 EVM microcontroller"
- depends on I2C=y && MACH_DAVINCI_DM355_EVM
+config MFD_STMPE
+ bool "STMicroelectronics STMPE"
+ depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
+ select MFD_CORE
help
- This driver supports the MSP430 microcontroller used on these
- boards. MSP430 firmware manages resets and power sequencing,
- inputs from buttons and the IR remote, LEDs, an RTC, and more.
+ Support for the STMPE family of I/O Expanders from
+ STMicroelectronics.
-config MFD_TI_SSP
- tristate "TI Sequencer Serial Port support"
- depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
+ Currently supported devices are:
+
+ STMPE811: GPIO, Touchscreen
+ STMPE1601: GPIO, Keypad
+ STMPE1801: GPIO, Keypad
+ STMPE2401: GPIO, Keypad
+ STMPE2403: GPIO, Keypad
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device. Currently available sub drivers are:
+
+ GPIO: stmpe-gpio
+ Keypad: stmpe-keypad
+ Touchscreen: stmpe-ts
+
+menu "STMicroelectronics STMPE Interface Drivers"
+depends on MFD_STMPE
+
+config STMPE_I2C
+ bool "STMicroelectronics STMPE I2C Inteface"
+ depends on I2C=y
+ default y
+ help
+ This is used to enable I2C interface of STMPE
+
+config STMPE_SPI
+ bool "STMicroelectronics STMPE SPI Inteface"
+ depends on SPI_MASTER
+ help
+ This is used to enable SPI interface of STMPE
+endmenu
+
+config MFD_STA2X11
+ bool "STMicroelectronics STA2X11"
+ depends on STA2X11 && GENERIC_HARDIRQS
select MFD_CORE
- ---help---
- Say Y here if you want support for the Sequencer Serial Port
- in a Texas Instruments TNETV107X SoC.
+ select REGMAP_MMIO
- To compile this driver as a module, choose M here: the
- module will be called ti-ssp.
+config MFD_SYSCON
+ bool "System Controller Register R/W Based on Regmap"
+ select REGMAP_MMIO
+ help
+ Select this option to enable accessing system control registers
+ via regmap.
+
+config MFD_DAVINCI_VOICECODEC
+ tristate
+ select MFD_CORE
config MFD_TI_AM335X_TSCADC
tristate "TI ADC / Touch Screen chip support"
@@ -116,60 +672,56 @@ config MFD_TI_AM335X_TSCADC
To compile this driver as a module, choose M here: the
module will be called ti_am335x_tscadc.
-config HTC_EGPIO
- bool "HTC EGPIO support"
- depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+config MFD_DM355EVM_MSP
+ bool "TI DaVinci DM355 EVM microcontroller"
+ depends on I2C=y && MACH_DAVINCI_DM355_EVM
help
- This driver supports the CPLD egpio chip present on
- several HTC phones. It provides basic support for input
- pins, output pins, and irqs.
+ This driver supports the MSP430 microcontroller used on these
+ boards. MSP430 firmware manages resets and power sequencing,
+ inputs from buttons and the IR remote, LEDs, an RTC, and more.
-config HTC_PASIC3
- tristate "HTC PASIC3 LED/DS1WM chip support"
+config MFD_LP8788
+ bool "TI LP8788 Power Management Unit Driver"
+ depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
- depends on GENERIC_HARDIRQS
- help
- This core driver provides register access for the LED/DS1WM
- chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
- HTC Magician devices, respectively. Actual functionality is
- handled by the leds-pasic3 and ds1wm drivers.
-
-config HTC_I2CPLD
- bool "HTC I2C PLD chip support"
- depends on I2C=y && GPIOLIB
+ select REGMAP_I2C
+ select IRQ_DOMAIN
help
- If you say yes here you get support for the supposed CPLD
- found on omap850 HTC devices like the HTC Wizard and HTC Herald.
- This device provides input and output GPIOs through an I2C
- interface to one or more sub-chips.
+ TI LP8788 PMU supports regulators, battery charger, RTC,
+ ADC, backlight driver and current sinks.
-config UCB1400_CORE
- tristate "Philips UCB1400 Core driver"
- depends on AC97_BUS
- depends on GPIOLIB
+config MFD_OMAP_USB_HOST
+ bool "TI OMAP USBHS core and TLL driver"
+ depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
+ default y
help
- This enables support for the Philips UCB1400 core functions.
- The UCB1400 is an AC97 audio codec.
-
- To compile this driver as a module, choose M here: the
- module will be called ucb1400_core.
+ This is the core driver for the OAMP EHCI and OHCI drivers.
+ This MFD driver does the required setup functionalities for
+ OMAP USB Host drivers.
-config MFD_LM3533
- tristate "LM3533 Lighting Power chip"
- depends on I2C
+config MFD_PALMAS
+ bool "TI Palmas series chips"
select MFD_CORE
select REGMAP_I2C
- depends on GENERIC_HARDIRQS
+ select REGMAP_IRQ
+ depends on I2C=y && GENERIC_HARDIRQS
help
- Say yes here to enable support for National Semiconductor / TI
- LM3533 Lighting Power chips.
+ If you say yes here you get support for the Palmas
+ series of PMIC chips from Texas Instruments.
- This driver provides common support for accessing the device;
- additional drivers must be enabled in order to use the LED,
- backlight or ambient-light-sensor functionality of the device.
+config MFD_TI_SSP
+ tristate "TI Sequencer Serial Port support"
+ depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
+ select MFD_CORE
+ ---help---
+ Say Y here if you want support for the Sequencer Serial Port
+ in a Texas Instruments TNETV107X SoC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ti-ssp.
config TPS6105X
- tristate "TPS61050/61052 Boost Converters"
+ tristate "TI TPS61050/61052 Boost Converters"
depends on I2C
select REGULATOR
select MFD_CORE
@@ -182,7 +734,7 @@ config TPS6105X
also contains a GPIO pin.
config TPS65010
- tristate "TPS6501x Power Management chips"
+ tristate "TI TPS6501x Power Management chips"
depends on I2C && GPIOLIB
default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
help
@@ -195,7 +747,7 @@ config TPS65010
will be called tps65010.
config TPS6507X
- tristate "TPS6507x Power Management / Touch Screen chips"
+ tristate "TI TPS6507x Power Management / Touch Screen chips"
select MFD_CORE
depends on I2C && GENERIC_HARDIRQS
help
@@ -206,8 +758,24 @@ config TPS6507X
This driver can also be built as a module. If so, the module
will be called tps6507x.
+config TPS65911_COMPARATOR
+ tristate
+
+config MFD_TPS65090
+ bool "TI TPS65090 Power Management chips"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ help
+ If you say yes here you get support for the TPS65090 series of
+ Power Management chips.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
config MFD_TPS65217
- tristate "TPS65217 Power Management / White LED chips"
+ tristate "TI TPS65217 Power Management / White LED chips"
depends on I2C && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
@@ -222,7 +790,7 @@ config MFD_TPS65217
will be called tps65217.
config MFD_TPS6586X
- bool "TPS6586x Power Management chips"
+ bool "TI TPS6586x Power Management chips"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
@@ -237,7 +805,7 @@ config MFD_TPS6586X
will be called tps6586x.
config MFD_TPS65910
- bool "TPS65910 Power Management chip"
+ bool "TI TPS65910 Power Management chip"
depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
@@ -248,11 +816,14 @@ config MFD_TPS65910
Power Management chips.
config MFD_TPS65912
- bool
+ bool "TI TPS65912 Power Management chip"
depends on GPIOLIB
+ help
+ If you say yes here you get support for the TPS65912 series of
+ PM chips.
config MFD_TPS65912_I2C
- bool "TPS65912 Power Management chip with I2C"
+ bool "TI TPS65912 Power Management chip with I2C"
select MFD_CORE
select MFD_TPS65912
depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
@@ -261,7 +832,7 @@ config MFD_TPS65912_I2C
PM chips with I2C interface.
config MFD_TPS65912_SPI
- bool "TPS65912 Power Management chip with SPI"
+ bool "TI TPS65912 Power Management chip with SPI"
select MFD_CORE
select MFD_TPS65912
depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS
@@ -283,18 +854,8 @@ config MFD_TPS80031
ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
Power Path from USB, 32K clock generator.
-config MENELAUS
- bool "Texas Instruments TWL92330/Menelaus PM chip"
- depends on I2C=y && ARCH_OMAP2
- help
- If you say yes here you get support for the Texas Instruments
- TWL92330/Menelaus Power Management chip. This include voltage
- regulators, Dual slot memory card transceivers, real-time clock
- and other features that are often used in portable devices like
- cell phones and PDAs.
-
config TWL4030_CORE
- bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
+ bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
depends on I2C=y && GENERIC_HARDIRQS
select IRQ_DOMAIN
select REGMAP_I2C
@@ -310,7 +871,7 @@ config TWL4030_CORE
versions) and many other features.
config TWL4030_MADC
- tristate "Texas Instruments TWL4030 MADC"
+ tristate "TI TWL4030 MADC"
depends on TWL4030_CORE
help
This driver provides support for triton TWL4030-MADC. The
@@ -320,7 +881,7 @@ config TWL4030_MADC
named twl4030-madc
config TWL4030_POWER
- bool "Support power resources on TWL4030 family chips"
+ bool "TI TWL4030 power resources"
depends on TWL4030_CORE && ARM
help
Say yes here if you want to use the power resources on the
@@ -333,13 +894,13 @@ config TWL4030_POWER
or reset when a sleep, wakeup or warm reset event occurs.
config MFD_TWL4030_AUDIO
- bool
+ bool "TI TWL4030 Audio"
depends on TWL4030_CORE && GENERIC_HARDIRQS
select MFD_CORE
default n
config TWL6040_CORE
- bool "Support for TWL6040 audio codec"
+ bool "TI TWL6040 audio codec"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
@@ -352,48 +913,53 @@ config TWL6040_CORE
additional drivers must be enabled in order to use the
functionality of the device (audio, vibra).
-config MFD_STMPE
- bool "Support STMicroelectronics STMPE"
- depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
- select MFD_CORE
+config MENELAUS
+ bool "TI TWL92330/Menelaus PM chip"
+ depends on I2C=y && ARCH_OMAP2
help
- Support for the STMPE family of I/O Expanders from
- STMicroelectronics.
-
- Currently supported devices are:
-
- STMPE811: GPIO, Touchscreen
- STMPE1601: GPIO, Keypad
- STMPE2401: GPIO, Keypad
- STMPE2403: GPIO, Keypad
+ If you say yes here you get support for the Texas Instruments
+ TWL92330/Menelaus Power Management chip. This include voltage
+ regulators, Dual slot memory card transceivers, real-time clock
+ and other features that are often used in portable devices like
+ cell phones and PDAs.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the functionality
- of the device. Currently available sub drivers are:
+config MFD_WL1273_CORE
+ tristate "TI WL1273 FM radio"
+ depends on I2C && GENERIC_HARDIRQS
+ select MFD_CORE
+ default n
+ help
+ This is the core driver for the TI WL1273 FM radio. This MFD
+ driver connects the radio-wl1273 V4L2 module and the wl1273
+ audio codec.
- GPIO: stmpe-gpio
- Keypad: stmpe-keypad
- Touchscreen: stmpe-ts
+config MFD_LM3533
+ tristate "TI/National Semiconductor LM3533 Lighting Power chip"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on GENERIC_HARDIRQS
+ help
+ Say yes here to enable support for National Semiconductor / TI
+ LM3533 Lighting Power chips.
-menu "STMPE Interface Drivers"
-depends on MFD_STMPE
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the LED,
+ backlight or ambient-light-sensor functionality of the device.
-config STMPE_I2C
- bool "STMPE I2C Inteface"
- depends on I2C=y
- default y
- help
- This is used to enable I2C interface of STMPE
+config MFD_TIMBERDALE
+ tristate "Timberdale FPGA"
+ select MFD_CORE
+ depends on PCI && GPIOLIB
+ ---help---
+ This is the core driver for the timberdale FPGA. This device is a
+ multifunction device which exposes numerous platform devices.
-config STMPE_SPI
- bool "STMPE SPI Inteface"
- depends on SPI_MASTER
- help
- This is used to enable SPI interface of STMPE
-endmenu
+ The timberdale FPGA can be found on the Intel Atom development board
+ for in-vehicle infontainment, called Russellville.
config MFD_TC3589X
- bool "Support Toshiba TC35892 and variants"
+ bool "Toshiba TC35892 and variants"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
help
@@ -408,27 +974,15 @@ config MFD_TMIO
default n
config MFD_T7L66XB
- bool "Support Toshiba T7L66XB"
+ bool "Toshiba T7L66XB"
depends on ARM && HAVE_CLK && GENERIC_HARDIRQS
select MFD_CORE
select MFD_TMIO
help
Support for Toshiba Mobile IO Controller T7L66XB
-config MFD_SMSC
- bool "Support for the SMSC ECE1099 series chips"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- help
- If you say yes here you get support for the
- ece1099 chips from SMSC.
-
- To compile this driver as a module, choose M here: the
- module will be called smsc.
-
config MFD_TC6387XB
- bool "Support Toshiba TC6387XB"
+ bool "Toshiba TC6387XB"
depends on ARM && HAVE_CLK
select MFD_CORE
select MFD_TMIO
@@ -436,7 +990,7 @@ config MFD_TC6387XB
Support for Toshiba Mobile IO Controller TC6387XB
config MFD_TC6393XB
- bool "Support Toshiba TC6393XB"
+ bool "Toshiba TC6393XB"
depends on ARM && HAVE_CLK
select GPIOLIB
select MFD_CORE
@@ -444,165 +998,14 @@ config MFD_TC6393XB
help
Support for Toshiba Mobile IO Controller TC6393XB
-config PMIC_DA903X
- bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
- depends on I2C=y
- help
- Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
- ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
- usually found on PXA processors-based platforms. This includes
- the I2C driver and the core APIs _only_, you have to select
- individual components like LCD backlight, voltage regulators,
- LEDs and battery-charger under the corresponding menus.
-
-config PMIC_DA9052
- bool
- select MFD_CORE
-
-config MFD_DA9052_SPI
- bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
- select REGMAP_SPI
- select REGMAP_IRQ
- select PMIC_DA9052
- depends on SPI_MASTER=y && GENERIC_HARDIRQS
- help
- Support for the Dialog Semiconductor DA9052 PMIC
- when controlled using SPI. This driver provides common support
- for accessing the device, additional drivers must be enabled in
- order to use the functionality of the device.
-
-config MFD_DA9052_I2C
- bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
- select REGMAP_I2C
- select REGMAP_IRQ
- select PMIC_DA9052
- depends on I2C=y && GENERIC_HARDIRQS
- help
- Support for the Dialog Semiconductor DA9052 PMIC
- when controlled using I2C. This driver provides common support
- for accessing the device, additional drivers must be enabled in
- order to use the functionality of the device.
-
-config MFD_DA9055
- bool "Dialog Semiconductor DA9055 PMIC Support"
- select REGMAP_I2C
- select REGMAP_IRQ
- select PMIC_DA9055
- select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS
- help
- Say yes here for support of Dialog Semiconductor DA9055. This is
- a Power Management IC. This driver provides common support for
- accessing the device as well as the I2C interface to the chip itself.
- Additional drivers must be enabled in order to use the functionality
- of the device.
-
- This driver can be built as a module. If built as a module it will be
- called "da9055"
-
-config PMIC_ADP5520
- bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
- depends on I2C=y
- help
- Say yes here to add support for Analog Devices AD5520 and ADP5501,
- Multifunction Power Management IC. This includes
- the I2C driver and the core APIs _only_, you have to select
- individual components like LCD backlight, LEDs, GPIOs and Kepad
- under the corresponding menus.
-
-config MFD_LP8788
- bool "Texas Instruments LP8788 Power Management Unit Driver"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- select IRQ_DOMAIN
- help
- TI LP8788 PMU supports regulators, battery charger, RTC,
- ADC, backlight driver and current sinks.
-
-config MFD_MAX77686
- bool "Maxim Semiconductor MAX77686 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- select IRQ_DOMAIN
- help
- Say yes here to support for Maxim Semiconductor MAX77686.
- This is a Power Management IC with RTC on chip.
- This driver provides common support for accessing the device;
- additional drivers must be enabled in order to use the functionality
- of the device.
-
-config MFD_MAX77693
- bool "Maxim Semiconductor MAX77693 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- help
- Say yes here to support for Maxim Semiconductor MAX77693.
- This is a companion Power Management IC with Flash, Haptic, Charger,
- and MUIC(Micro USB Interface Controller) controls on chip.
- This driver provides common support for accessing the device;
- additional drivers must be enabled in order to use the functionality
- of the device.
-
-config MFD_MAX8907
- tristate "Maxim Semiconductor MAX8907 PMIC Support"
- select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS
- select REGMAP_I2C
- select REGMAP_IRQ
- help
- Say yes here to support for Maxim Semiconductor MAX8907. This is
- a Power Management IC. This driver provides common support for
- accessing the device; additional drivers must be enabled in order
- to use the functionality of the device.
-
-config MFD_MAX8925
- bool "Maxim Semiconductor MAX8925 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- help
- Say yes here to support for Maxim Semiconductor MAX8925. This is
- a Power Management IC. This driver provides common support for
- accessing the device, additional drivers must be enabled in order
- to use the functionality of the device.
-
-config MFD_MAX8997
- bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select IRQ_DOMAIN
- help
- Say yes here to support for Maxim Semiconductor MAX8997/8966.
- This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
- MUIC controls on chip.
- This driver provides common support for accessing the device;
- additional drivers must be enabled in order to use the functionality
- of the device.
-
-config MFD_MAX8998
- bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- help
- Say yes here to support for Maxim Semiconductor MAX8998 and
- National Semiconductor LP3974. This is a Power Management IC.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the functionality
- of the device.
-
-config MFD_SEC_CORE
- bool "SAMSUNG Electronics PMIC Series Support"
- depends on I2C=y && GENERIC_HARDIRQS
+config MFD_VX855
+ tristate "VIA VX855/VX875 integrated south bridge"
+ depends on PCI && GENERIC_HARDIRQS
select MFD_CORE
- select REGMAP_I2C
- select REGMAP_IRQ
help
- Support for the Samsung Electronics MFD series.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the functionality
- of the device
+ Say yes here to enable support for various functions of the
+ VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
+ and/or vx855_gpio drivers for this to do anything useful.
config MFD_ARIZONA
select REGMAP
@@ -611,7 +1014,7 @@ config MFD_ARIZONA
bool
config MFD_ARIZONA_I2C
- tristate "Support Wolfson Microelectronics Arizona platform with I2C"
+ tristate "Wolfson Microelectronics Arizona platform with I2C"
select MFD_ARIZONA
select MFD_CORE
select REGMAP_I2C
@@ -621,7 +1024,7 @@ config MFD_ARIZONA_I2C
core functionality controlled via I2C.
config MFD_ARIZONA_SPI
- tristate "Support Wolfson Microelectronics Arizona platform with SPI"
+ tristate "Wolfson Microelectronics Arizona platform with SPI"
select MFD_ARIZONA
select MFD_CORE
select REGMAP_SPI
@@ -631,19 +1034,19 @@ config MFD_ARIZONA_SPI
core functionality controlled via I2C.
config MFD_WM5102
- bool "Support Wolfson Microelectronics WM5102"
+ bool "Wolfson Microelectronics WM5102"
depends on MFD_ARIZONA
help
Support for Wolfson Microelectronics WM5102 low power audio SoC
config MFD_WM5110
- bool "Support Wolfson Microelectronics WM5110"
+ bool "Wolfson Microelectronics WM5110"
depends on MFD_ARIZONA
help
Support for Wolfson Microelectronics WM5110 low power audio SoC
config MFD_WM8400
- bool "Support Wolfson Microelectronics WM8400"
+ bool "Wolfson Microelectronics WM8400"
select MFD_CORE
depends on I2C=y && GENERIC_HARDIRQS
select REGMAP_I2C
@@ -658,7 +1061,7 @@ config MFD_WM831X
depends on GENERIC_HARDIRQS
config MFD_WM831X_I2C
- bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
+ bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
select MFD_CORE
select MFD_WM831X
select REGMAP_I2C
@@ -671,7 +1074,7 @@ config MFD_WM831X_I2C
order to use the functionality of the device.
config MFD_WM831X_SPI
- bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
+ bool "Wolfson Microelectronics WM831x/2x PMICs with SPI"
select MFD_CORE
select MFD_WM831X
select REGMAP_SPI
@@ -687,56 +1090,8 @@ config MFD_WM8350
bool
depends on GENERIC_HARDIRQS
-config MFD_WM8350_CONFIG_MODE_0
- bool
- depends on MFD_WM8350
-
-config MFD_WM8350_CONFIG_MODE_1
- bool
- depends on MFD_WM8350
-
-config MFD_WM8350_CONFIG_MODE_2
- bool
- depends on MFD_WM8350
-
-config MFD_WM8350_CONFIG_MODE_3
- bool
- depends on MFD_WM8350
-
-config MFD_WM8351_CONFIG_MODE_0
- bool
- depends on MFD_WM8350
-
-config MFD_WM8351_CONFIG_MODE_1
- bool
- depends on MFD_WM8350
-
-config MFD_WM8351_CONFIG_MODE_2
- bool
- depends on MFD_WM8350
-
-config MFD_WM8351_CONFIG_MODE_3
- bool
- depends on MFD_WM8350
-
-config MFD_WM8352_CONFIG_MODE_0
- bool
- depends on MFD_WM8350
-
-config MFD_WM8352_CONFIG_MODE_1
- bool
- depends on MFD_WM8350
-
-config MFD_WM8352_CONFIG_MODE_2
- bool
- depends on MFD_WM8350
-
-config MFD_WM8352_CONFIG_MODE_3
- bool
- depends on MFD_WM8350
-
config MFD_WM8350_I2C
- bool "Support Wolfson Microelectronics WM8350 with I2C"
+ bool "Wolfson Microelectronics WM8350 with I2C"
select MFD_WM8350
depends on I2C=y && GENERIC_HARDIRQS
help
@@ -747,7 +1102,7 @@ config MFD_WM8350_I2C
selected to enable support for the functionality of the chip.
config MFD_WM8994
- bool "Support Wolfson Microelectronics WM8994"
+ bool "Wolfson Microelectronics WM8994"
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
@@ -760,365 +1115,6 @@ config MFD_WM8994
core support for the WM8994, in order to use the actual
functionaltiy of the device other drivers must be enabled.
-config MFD_PCF50633
- tristate "Support for NXP PCF50633"
- depends on I2C
- select REGMAP_I2C
- help
- Say yes here if you have NXP PCF50633 chip on your board.
- This core driver provides register access and IRQ handling
- facilities, and registers devices for the various functions
- so that function-specific drivers can bind to them.
-
-config PCF50633_ADC
- tristate "Support for NXP PCF50633 ADC"
- depends on MFD_PCF50633
- help
- Say yes here if you want to include support for ADC in the
- NXP PCF50633 chip.
-
-config PCF50633_GPIO
- tristate "Support for NXP PCF50633 GPIO"
- depends on MFD_PCF50633
- help
- Say yes here if you want to include support GPIO for pins on
- the PCF50633 chip.
-
-config MFD_MC13783
- tristate
-
-config MFD_MC13XXX
- tristate
- depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
- select MFD_CORE
- select MFD_MC13783
- help
- Enable support for the Freescale MC13783 and MC13892 PMICs.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device.
-
-config MFD_MC13XXX_SPI
- tristate "Freescale MC13783 and MC13892 SPI interface"
- depends on SPI_MASTER && GENERIC_HARDIRQS
- select REGMAP_SPI
- select MFD_MC13XXX
- help
- Select this if your MC13xxx is connected via an SPI bus.
-
-config MFD_MC13XXX_I2C
- tristate "Freescale MC13892 I2C interface"
- depends on I2C && GENERIC_HARDIRQS
- select REGMAP_I2C
- select MFD_MC13XXX
- help
- Select this if your MC13xxx is connected via an I2C bus.
-
-config ABX500_CORE
- bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
- default y if ARCH_U300 || ARCH_U8500
- help
- Say yes here if you have the ABX500 Mixed Signal IC family
- chips. This core driver expose register access functions.
- Functionality specific drivers using these functions can
- remain unchanged when IC changes. Binding of the functions to
- actual register access is done by the IC core driver.
-
-config AB3100_CORE
- bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
- depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
- select MFD_CORE
- default y if ARCH_U300
- help
- Select this to enable the AB3100 Mixed Signal IC core
- functionality. This connects to a AB3100 on the I2C bus
- and expose a number of symbols needed for dependent devices
- to read and write registers and subscribe to events from
- this multi-functional IC. This is needed to use other features
- of the AB3100 such as battery-backed RTC, charging control,
- LEDs, vibrator, system power and temperature, power management
- and ALSA sound.
-
-config AB3100_OTP
- tristate "ST-Ericsson AB3100 OTP functions"
- depends on AB3100_CORE
- default y if AB3100_CORE
- help
- Select this to enable the AB3100 Mixed Signal IC OTP (one-time
- programmable memory) support. This exposes a sysfs file to read
- out OTP values.
-
-config EZX_PCAP
- bool "PCAP Support"
- depends on GENERIC_HARDIRQS && SPI_MASTER
- help
- This enables the PCAP ASIC present on EZX Phones. This is
- needed for MMC, TouchScreen, Sound, USB, etc..
-
-config AB8500_CORE
- bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
- depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
- select POWER_SUPPLY
- select MFD_CORE
- select IRQ_DOMAIN
- help
- Select this option to enable access to AB8500 power management
- chip. This connects to U8500 either on the SSP/SPI bus (deprecated
- since hardware version v1.0) or the I2C bus via PRCMU. It also adds
- the irq_chip parts for handling the Mixed Signal chip events.
- This chip embeds various other multimedia funtionalities as well.
-
-config AB8500_DEBUG
- bool "Enable debug info via debugfs"
- depends on AB8500_CORE && DEBUG_FS
- default y if DEBUG_FS
- help
- Select this option if you want debug information using the debug
- filesystem, debugfs.
-
-config AB8500_GPADC
- bool "AB8500 GPADC driver"
- depends on AB8500_CORE && REGULATOR_AB8500
- default y
- help
- AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
-
-config MFD_DB8500_PRCMU
- bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
- depends on UX500_SOC_DB8500
- select MFD_CORE
- help
- Select this option to enable support for the DB8500 Power Reset
- and Control Management Unit. This is basically an autonomous
- system controller running an XP70 microprocessor, which is accessed
- through a register map.
-
-config MFD_CS5535
- tristate "Support for CS5535 and CS5536 southbridge core functions"
- select MFD_CORE
- depends on PCI && X86
- ---help---
- This is the core driver for CS5535/CS5536 MFD functions. This is
- necessary for using the board's GPIO and MFGPT functionality.
-
-config MFD_TIMBERDALE
- tristate "Support for the Timberdale FPGA"
- select MFD_CORE
- depends on PCI && GPIOLIB
- ---help---
- This is the core driver for the timberdale FPGA. This device is a
- multifunction device which exposes numerous platform devices.
-
- The timberdale FPGA can be found on the Intel Atom development board
- for in-vehicle infontainment, called Russellville.
-
-config LPC_SCH
- tristate "Intel SCH LPC"
- depends on PCI && GENERIC_HARDIRQS
- select MFD_CORE
- help
- LPC bridge function of the Intel SCH provides support for
- System Management Bus and General Purpose I/O.
-
-config LPC_ICH
- tristate "Intel ICH LPC"
- depends on PCI && GENERIC_HARDIRQS
- select MFD_CORE
- help
- The LPC bridge function of the Intel ICH provides support for
- many functional units. This driver provides needed support for
- other drivers to control these functions, currently GPIO and
- watchdog.
-
-config MFD_RDC321X
- tristate "Support for RDC-R321x southbridge"
- select MFD_CORE
- depends on PCI && GENERIC_HARDIRQS
- help
- Say yes here if you want to have support for the RDC R-321x SoC
- southbridge which provides access to GPIOs and Watchdog using the
- southbridge PCI device configuration space.
-
-config MFD_JANZ_CMODIO
- tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
- select MFD_CORE
- depends on PCI && GENERIC_HARDIRQS
- help
- This is the core driver for the Janz CMOD-IO PCI MODULbus
- carrier board. This device is a PCI to MODULbus bridge which may
- host many different types of MODULbus daughterboards, including
- CAN and GPIO controllers.
-
-config MFD_JZ4740_ADC
- bool "Support for the JZ4740 SoC ADC core"
- select MFD_CORE
- select GENERIC_IRQ_CHIP
- depends on MACH_JZ4740
- help
- Say yes here if you want support for the ADC unit in the JZ4740 SoC.
- This driver is necessary for jz4740-battery and jz4740-hwmon driver.
-
-config MFD_VX855
- tristate "Support for VIA VX855/VX875 integrated south bridge"
- depends on PCI && GENERIC_HARDIRQS
- select MFD_CORE
- help
- Say yes here to enable support for various functions of the
- VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
- and/or vx855_gpio drivers for this to do anything useful.
-
-config MFD_WL1273_CORE
- tristate "Support for TI WL1273 FM radio."
- depends on I2C && GENERIC_HARDIRQS
- select MFD_CORE
- default n
- help
- This is the core driver for the TI WL1273 FM radio. This MFD
- driver connects the radio-wl1273 V4L2 module and the wl1273
- audio codec.
-
-config MFD_OMAP_USB_HOST
- bool "Support OMAP USBHS core and TLL driver"
- depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
- default y
- help
- This is the core driver for the OAMP EHCI and OHCI drivers.
- This MFD driver does the required setup functionalities for
- OMAP USB Host drivers.
-
-config MFD_PM8XXX
- tristate
-
-config MFD_PM8921_CORE
- tristate "Qualcomm PM8921 PMIC chip"
- depends on SSBI && BROKEN
- select MFD_CORE
- select MFD_PM8XXX
- help
- If you say yes to this option, support will be included for the
- built-in PM8921 PMIC chip.
-
- This is required if your board has a PM8921 and uses its features,
- such as: MPPs, GPIOs, regulators, interrupts, and PWM.
-
- Say M here if you want to include support for PM8921 chip as a module.
- This will build a module called "pm8921-core".
-
-config MFD_PM8XXX_IRQ
- bool "Support for Qualcomm PM8xxx IRQ features"
- depends on MFD_PM8XXX
- default y if MFD_PM8XXX
- help
- This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
-
- This is required to use certain other PM 8xxx features, such as GPIO
- and MPP.
-
-config TPS65911_COMPARATOR
- tristate
-
-config MFD_TPS65090
- bool "TPS65090 Power Management chips"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- select REGMAP_IRQ
- help
- If you say yes here you get support for the TPS65090 series of
- Power Management chips.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device.
-
-config MFD_AAT2870_CORE
- bool "Support for the AnalogicTech AAT2870"
- select MFD_CORE
- depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
- help
- If you say yes here you get support for the AAT2870.
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the
- functionality of the device.
-
-config MFD_INTEL_MSIC
- bool "Support for Intel MSIC"
- depends on INTEL_SCU_IPC
- select MFD_CORE
- help
- Select this option to enable access to Intel MSIC (Avatele
- Passage) chip. This chip embeds audio, battery, GPIO, etc.
- devices used in Intel Medfield platforms.
-
-config MFD_RC5T583
- bool "Ricoh RC5T583 Power Management system device"
- depends on I2C=y && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_I2C
- help
- Select this option to get support for the RICOH583 Power
- Management system device.
- This driver provides common support for accessing the device
- through i2c interface. The device supports multiple sub-devices
- like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
- Additional drivers must be enabled in order to use the
- different functionality of the device.
-
-config MFD_STA2X11
- bool "STA2X11 multi function device support"
- depends on STA2X11 && GENERIC_HARDIRQS
- select MFD_CORE
- select REGMAP_MMIO
-
-config MFD_SYSCON
- bool "System Controller Register R/W Based on Regmap"
- depends on OF
- select REGMAP_MMIO
- help
- Select this option to enable accessing system control registers
- via regmap.
-
-config MFD_PALMAS
- bool "Support for the TI Palmas series chips"
- select MFD_CORE
- select REGMAP_I2C
- select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
- help
- If you say yes here you get support for the Palmas
- series of PMIC chips from Texas Instruments.
-
-config MFD_VIPERBOARD
- tristate "Support for Nano River Technologies Viperboard"
- select MFD_CORE
- depends on USB && GENERIC_HARDIRQS
- default n
- help
- Say yes here if you want support for Nano River Technologies
- Viperboard.
- There are mfd cell drivers available for i2c master, adc and
- both gpios found on the board. The spi part does not yet
- have a driver.
- You need to select the mfd cell drivers separately.
- The drivers do not support all features the board exposes.
-
-config MFD_RETU
- tristate "Support for Retu multi-function device"
- select MFD_CORE
- depends on I2C && GENERIC_HARDIRQS
- select REGMAP_IRQ
- help
- Retu is a multi-function device found on Nokia Internet Tablets
- (770, N800 and N810).
-
-config MFD_AS3711
- bool "Support for AS3711"
- select MFD_CORE
- select REGMAP_I2C
- select REGMAP_IRQ
- depends on I2C=y && GENERIC_HARDIRQS
- help
- Support for the AS3711 PMIC from AMS
-
endmenu
endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b90409c2366..718e94a2a9a 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -8,8 +8,11 @@ obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
+obj-$(CONFIG_MFD_CROS_EC) += cros_ec.o
+obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o
+obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o
-rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o
+rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
@@ -131,6 +134,10 @@ obj-$(CONFIG_MFD_JZ4740_ADC) += jz4740-adc.o
obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o
obj-$(CONFIG_MFD_VX855) += vx855.o
obj-$(CONFIG_MFD_WL1273_CORE) += wl1273-core.o
+
+si476x-core-y := si476x-cmd.o si476x-prop.o si476x-i2c.o
+obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
+
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
index f1beb4971f8..dfdb0a2b683 100644
--- a/drivers/mfd/aat2870-core.c
+++ b/drivers/mfd/aat2870-core.c
@@ -367,12 +367,12 @@ static int aat2870_i2c_probe(struct i2c_client *client,
int i, j;
int ret = 0;
- aat2870 = kzalloc(sizeof(struct aat2870_data), GFP_KERNEL);
+ aat2870 = devm_kzalloc(&client->dev, sizeof(struct aat2870_data),
+ GFP_KERNEL);
if (!aat2870) {
dev_err(&client->dev,
"Failed to allocate memory for aat2870\n");
- ret = -ENOMEM;
- goto out;
+ return -ENOMEM;
}
aat2870->dev = &client->dev;
@@ -400,12 +400,12 @@ static int aat2870_i2c_probe(struct i2c_client *client,
aat2870->init(aat2870);
if (aat2870->en_pin >= 0) {
- ret = gpio_request_one(aat2870->en_pin, GPIOF_OUT_INIT_HIGH,
- "aat2870-en");
+ ret = devm_gpio_request_one(&client->dev, aat2870->en_pin,
+ GPIOF_OUT_INIT_HIGH, "aat2870-en");
if (ret < 0) {
dev_err(&client->dev,
"Failed to request GPIO %d\n", aat2870->en_pin);
- goto out_kfree;
+ return ret;
}
}
@@ -436,11 +436,6 @@ static int aat2870_i2c_probe(struct i2c_client *client,
out_disable:
aat2870_disable(aat2870);
- if (aat2870->en_pin >= 0)
- gpio_free(aat2870->en_pin);
-out_kfree:
- kfree(aat2870);
-out:
return ret;
}
@@ -452,11 +447,8 @@ static int aat2870_i2c_remove(struct i2c_client *client)
mfd_remove_devices(aat2870->dev);
aat2870_disable(aat2870);
- if (aat2870->en_pin >= 0)
- gpio_free(aat2870->en_pin);
if (aat2870->uninit)
aat2870->uninit(aat2870);
- kfree(aat2870);
return 0;
}
diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c
index 8440010eb2b..d7ce016029f 100644
--- a/drivers/mfd/ab3100-otp.c
+++ b/drivers/mfd/ab3100-otp.c
@@ -248,19 +248,7 @@ static struct platform_driver ab3100_otp_driver = {
.remove = __exit_p(ab3100_otp_remove),
};
-static int __init ab3100_otp_init(void)
-{
- return platform_driver_probe(&ab3100_otp_driver,
- ab3100_otp_probe);
-}
-
-static void __exit ab3100_otp_exit(void)
-{
- platform_driver_unregister(&ab3100_otp_driver);
-}
-
-module_init(ab3100_otp_init);
-module_exit(ab3100_otp_exit);
+module_platform_driver_probe(ab3100_otp_driver, ab3100_otp_probe);
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
MODULE_DESCRIPTION("AB3100 OTP Readout Driver");
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index f276352cc9e..8e8a016effe 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -458,22 +458,23 @@ static void update_latch_offset(u8 *offset, int i)
static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
int latch_offset, u8 latch_val)
{
- int int_bit = __ffs(latch_val);
- int line, i;
+ int int_bit, line, i;
- do {
- int_bit = __ffs(latch_val);
+ for (i = 0; i < ab8500->mask_size; i++)
+ if (ab8500->irq_reg_offset[i] == latch_offset)
+ break;
- for (i = 0; i < ab8500->mask_size; i++)
- if (ab8500->irq_reg_offset[i] == latch_offset)
- break;
+ if (i >= ab8500->mask_size) {
+ dev_err(ab8500->dev, "Register offset 0x%2x not declared\n",
+ latch_offset);
+ return -ENXIO;
+ }
- if (i >= ab8500->mask_size) {
- dev_err(ab8500->dev, "Register offset 0x%2x not declared\n",
- latch_offset);
- return -ENXIO;
- }
+ /* ignore masked out interrupts */
+ latch_val &= ~ab8500->mask[i];
+ while (latch_val) {
+ int_bit = __ffs(latch_val);
line = (i << 3) + int_bit;
latch_val &= ~(1 << int_bit);
@@ -491,7 +492,7 @@ static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
line += 1;
handle_nested_irq(ab8500->irq_base + line);
- } while (latch_val);
+ }
return 0;
}
@@ -1107,6 +1108,7 @@ static struct mfd_cell ab8500_devs[] = {
},
{
.name = "ab8500-usb",
+ .of_compatible = "stericsson,ab8500-usb",
.num_resources = ARRAY_SIZE(ab8500_usb_resources),
.resources = ab8500_usb_resources,
},
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 65f72284185..5e65b28a5d0 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -332,7 +332,7 @@ if (ad_value < 0) {
return voltage;
}
-EXPORT_SYMBOL(ab8500_gpadc_convert);
+EXPORT_SYMBOL(ab8500_gpadc_sw_hw_convert);
/**
* ab8500_gpadc_read_raw() - gpadc read
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 272479cdb10..fbca1ced49f 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -242,7 +242,7 @@ static int __init ab8500_sysctrl_init(void)
{
return platform_driver_register(&ab8500_sysctrl_driver);
}
-subsys_initcall(ab8500_sysctrl_init);
+arch_initcall(ab8500_sysctrl_init);
MODULE_AUTHOR("Mattias Nilsson <mattias.i.nilsson@stericsson.com");
MODULE_DESCRIPTION("AB8500 system control driver");
diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c
index 210dd038bb5..0d2eba02343 100644
--- a/drivers/mfd/adp5520.c
+++ b/drivers/mfd/adp5520.c
@@ -36,6 +36,7 @@ struct adp5520_chip {
struct blocking_notifier_head notifier_list;
int irq;
unsigned long id;
+ uint8_t mode;
};
static int __adp5520_read(struct i2c_client *client,
@@ -326,7 +327,10 @@ static int adp5520_suspend(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct adp5520_chip *chip = dev_get_drvdata(&client->dev);
- adp5520_clr_bits(chip->dev, ADP5520_MODE_STATUS, ADP5520_nSTNBY);
+ adp5520_read(chip->dev, ADP5520_MODE_STATUS, &chip->mode);
+ /* All other bits are W1C */
+ chip->mode &= ADP5520_BL_EN | ADP5520_DIM_EN | ADP5520_nSTNBY;
+ adp5520_write(chip->dev, ADP5520_MODE_STATUS, 0);
return 0;
}
@@ -335,7 +339,7 @@ static int adp5520_resume(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct adp5520_chip *chip = dev_get_drvdata(&client->dev);
- adp5520_set_bits(chip->dev, ADP5520_MODE_STATUS, ADP5520_nSTNBY);
+ adp5520_write(chip->dev, ADP5520_MODE_STATUS, chip->mode);
return 0;
}
#endif
@@ -360,17 +364,7 @@ static struct i2c_driver adp5520_driver = {
.id_table = adp5520_id,
};
-static int __init adp5520_init(void)
-{
- return i2c_add_driver(&adp5520_driver);
-}
-module_init(adp5520_init);
-
-static void __exit adp5520_exit(void)
-{
- i2c_del_driver(&adp5520_driver);
-}
-module_exit(adp5520_exit);
+module_i2c_driver(adp5520_driver);
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("ADP5520(01) PMIC-MFD Driver");
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index b562c7bf8a4..6ab03043fd6 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -39,11 +39,21 @@ int arizona_clk32k_enable(struct arizona *arizona)
arizona->clk32k_ref++;
- if (arizona->clk32k_ref == 1)
+ if (arizona->clk32k_ref == 1) {
+ switch (arizona->pdata.clk32k_src) {
+ case ARIZONA_32KZ_MCLK1:
+ ret = pm_runtime_get_sync(arizona->dev);
+ if (ret != 0)
+ goto out;
+ break;
+ }
+
ret = regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
ARIZONA_CLK_32K_ENA,
ARIZONA_CLK_32K_ENA);
+ }
+out:
if (ret != 0)
arizona->clk32k_ref--;
@@ -63,10 +73,17 @@ int arizona_clk32k_disable(struct arizona *arizona)
arizona->clk32k_ref--;
- if (arizona->clk32k_ref == 0)
+ if (arizona->clk32k_ref == 0) {
regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
ARIZONA_CLK_32K_ENA, 0);
+ switch (arizona->pdata.clk32k_src) {
+ case ARIZONA_32KZ_MCLK1:
+ pm_runtime_put_sync(arizona->dev);
+ break;
+ }
+ }
+
mutex_unlock(&arizona->clk_lock);
return ret;
@@ -179,42 +196,134 @@ static irqreturn_t arizona_overclocked(int irq, void *data)
return IRQ_HANDLED;
}
-static int arizona_wait_for_boot(struct arizona *arizona)
+static int arizona_poll_reg(struct arizona *arizona,
+ int timeout, unsigned int reg,
+ unsigned int mask, unsigned int target)
{
- unsigned int reg;
+ unsigned int val = 0;
int ret, i;
+ for (i = 0; i < timeout; i++) {
+ ret = regmap_read(arizona->regmap, reg, &val);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to read reg %u: %d\n",
+ reg, ret);
+ continue;
+ }
+
+ if ((val & mask) == target)
+ return 0;
+
+ msleep(1);
+ }
+
+ dev_err(arizona->dev, "Polling reg %u timed out: %x\n", reg, val);
+ return -ETIMEDOUT;
+}
+
+static int arizona_wait_for_boot(struct arizona *arizona)
+{
+ int ret;
+
/*
* We can't use an interrupt as we need to runtime resume to do so,
* we won't race with the interrupt handler as it'll be blocked on
* runtime resume.
*/
- for (i = 0; i < 5; i++) {
- msleep(1);
+ ret = arizona_poll_reg(arizona, 5, ARIZONA_INTERRUPT_RAW_STATUS_5,
+ ARIZONA_BOOT_DONE_STS, ARIZONA_BOOT_DONE_STS);
- ret = regmap_read(arizona->regmap,
- ARIZONA_INTERRUPT_RAW_STATUS_5, &reg);
- if (ret != 0) {
- dev_err(arizona->dev, "Failed to read boot state: %d\n",
- ret);
- continue;
- }
+ if (!ret)
+ regmap_write(arizona->regmap, ARIZONA_INTERRUPT_STATUS_5,
+ ARIZONA_BOOT_DONE_STS);
- if (reg & ARIZONA_BOOT_DONE_STS)
- break;
+ pm_runtime_mark_last_busy(arizona->dev);
+
+ return ret;
+}
+
+static int arizona_apply_hardware_patch(struct arizona* arizona)
+{
+ unsigned int fll, sysclk;
+ int ret, err;
+
+ regcache_cache_bypass(arizona->regmap, true);
+
+ /* Cache existing FLL and SYSCLK settings */
+ ret = regmap_read(arizona->regmap, ARIZONA_FLL1_CONTROL_1, &fll);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to cache FLL settings: %d\n",
+ ret);
+ return ret;
+ }
+ ret = regmap_read(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, &sysclk);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to cache SYSCLK settings: %d\n",
+ ret);
+ return ret;
}
- if (reg & ARIZONA_BOOT_DONE_STS) {
- regmap_write(arizona->regmap, ARIZONA_INTERRUPT_STATUS_5,
- ARIZONA_BOOT_DONE_STS);
- } else {
- dev_err(arizona->dev, "Device boot timed out: %x\n", reg);
- return -ETIMEDOUT;
+ /* Start up SYSCLK using the FLL in free running mode */
+ ret = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1,
+ ARIZONA_FLL1_ENA | ARIZONA_FLL1_FREERUN);
+ if (ret != 0) {
+ dev_err(arizona->dev,
+ "Failed to start FLL in freerunning mode: %d\n",
+ ret);
+ return ret;
+ }
+ ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
+ ARIZONA_FLL1_CLOCK_OK_STS,
+ ARIZONA_FLL1_CLOCK_OK_STS);
+ if (ret != 0) {
+ ret = -ETIMEDOUT;
+ goto err_fll;
}
- pm_runtime_mark_last_busy(arizona->dev);
+ ret = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, 0x0144);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to start SYSCLK: %d\n", ret);
+ goto err_fll;
+ }
- return 0;
+ /* Start the write sequencer and wait for it to finish */
+ ret = regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
+ ARIZONA_WSEQ_ENA | ARIZONA_WSEQ_START | 160);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to start write sequencer: %d\n",
+ ret);
+ goto err_sysclk;
+ }
+ ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
+ ARIZONA_WSEQ_BUSY, 0);
+ if (ret != 0) {
+ regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
+ ARIZONA_WSEQ_ABORT);
+ ret = -ETIMEDOUT;
+ }
+
+err_sysclk:
+ err = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, sysclk);
+ if (err != 0) {
+ dev_err(arizona->dev,
+ "Failed to re-apply old SYSCLK settings: %d\n",
+ err);
+ }
+
+err_fll:
+ err = regmap_write(arizona->regmap, ARIZONA_FLL1_CONTROL_1, fll);
+ if (err != 0) {
+ dev_err(arizona->dev,
+ "Failed to re-apply old FLL settings: %d\n",
+ err);
+ }
+
+ regcache_cache_bypass(arizona->regmap, false);
+
+ if (ret != 0)
+ return ret;
+ else
+ return err;
}
#ifdef CONFIG_PM_RUNTIME
@@ -233,20 +342,44 @@ static int arizona_runtime_resume(struct device *dev)
regcache_cache_only(arizona->regmap, false);
- ret = arizona_wait_for_boot(arizona);
- if (ret != 0) {
- regulator_disable(arizona->dcvdd);
- return ret;
+ switch (arizona->type) {
+ case WM5102:
+ ret = wm5102_patch(arizona);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to apply patch: %d\n",
+ ret);
+ goto err;
+ }
+
+ ret = arizona_apply_hardware_patch(arizona);
+ if (ret != 0) {
+ dev_err(arizona->dev,
+ "Failed to apply hardware patch: %d\n",
+ ret);
+ goto err;
+ }
+ break;
+ default:
+ ret = arizona_wait_for_boot(arizona);
+ if (ret != 0) {
+ goto err;
+ }
+
+ break;
}
ret = regcache_sync(arizona->regmap);
if (ret != 0) {
dev_err(arizona->dev, "Failed to restore register cache\n");
- regulator_disable(arizona->dcvdd);
- return ret;
+ goto err;
}
return 0;
+
+err:
+ regcache_cache_only(arizona->regmap, true);
+ regulator_disable(arizona->dcvdd);
+ return ret;
}
static int arizona_runtime_suspend(struct device *dev)
@@ -371,6 +504,17 @@ int arizona_dev_init(struct arizona *arizona)
goto err_early;
}
+ if (arizona->pdata.reset) {
+ /* Start out with /RESET low to put the chip into reset */
+ ret = gpio_request_one(arizona->pdata.reset,
+ GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+ "arizona /RESET");
+ if (ret != 0) {
+ dev_err(dev, "Failed to request /RESET: %d\n", ret);
+ goto err_early;
+ }
+ }
+
ret = regulator_bulk_enable(arizona->num_core_supplies,
arizona->core_supplies);
if (ret != 0) {
@@ -386,16 +530,8 @@ int arizona_dev_init(struct arizona *arizona)
}
if (arizona->pdata.reset) {
- /* Start out with /RESET low to put the chip into reset */
- ret = gpio_request_one(arizona->pdata.reset,
- GPIOF_DIR_OUT | GPIOF_INIT_LOW,
- "arizona /RESET");
- if (ret != 0) {
- dev_err(dev, "Failed to request /RESET: %d\n", ret);
- goto err_dcvdd;
- }
-
gpio_set_value_cansleep(arizona->pdata.reset, 1);
+ msleep(1);
}
regcache_cache_only(arizona->regmap, false);
@@ -424,6 +560,7 @@ int arizona_dev_init(struct arizona *arizona)
arizona->type = WM5102;
}
apply_patch = wm5102_patch;
+ arizona->rev &= 0x7;
break;
#endif
#ifdef CONFIG_MFD_WM5110
@@ -454,6 +591,8 @@ int arizona_dev_init(struct arizona *arizona)
goto err_reset;
}
+ msleep(1);
+
ret = regcache_sync(arizona->regmap);
if (ret != 0) {
dev_err(dev, "Failed to sync device: %d\n", ret);
@@ -461,10 +600,24 @@ int arizona_dev_init(struct arizona *arizona)
}
}
- ret = arizona_wait_for_boot(arizona);
- if (ret != 0) {
- dev_err(arizona->dev, "Device failed initial boot: %d\n", ret);
- goto err_reset;
+ switch (arizona->type) {
+ case WM5102:
+ ret = regmap_read(arizona->regmap, 0x19, &val);
+ if (ret != 0)
+ dev_err(dev,
+ "Failed to check write sequencer state: %d\n",
+ ret);
+ else if (val & 0x01)
+ break;
+ /* Fall through */
+ default:
+ ret = arizona_wait_for_boot(arizona);
+ if (ret != 0) {
+ dev_err(arizona->dev,
+ "Device failed initial boot: %d\n", ret);
+ goto err_reset;
+ }
+ break;
}
if (apply_patch) {
@@ -474,6 +627,20 @@ int arizona_dev_init(struct arizona *arizona)
ret);
goto err_reset;
}
+
+ switch (arizona->type) {
+ case WM5102:
+ ret = arizona_apply_hardware_patch(arizona);
+ if (ret != 0) {
+ dev_err(arizona->dev,
+ "Failed to apply hardware patch: %d\n",
+ ret);
+ goto err_reset;
+ }
+ break;
+ default:
+ break;
+ }
}
for (i = 0; i < ARRAY_SIZE(arizona->pdata.gpio_defaults); i++) {
@@ -498,6 +665,7 @@ int arizona_dev_init(struct arizona *arizona)
regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
ARIZONA_CLK_32K_SRC_MASK,
arizona->pdata.clk32k_src - 1);
+ arizona_clk32k_enable(arizona);
break;
case ARIZONA_32KZ_NONE:
regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
@@ -511,10 +679,16 @@ int arizona_dev_init(struct arizona *arizona)
}
for (i = 0; i < ARIZONA_MAX_MICBIAS; i++) {
- if (!arizona->pdata.micbias[i].mV)
+ if (!arizona->pdata.micbias[i].mV &&
+ !arizona->pdata.micbias[i].bypass)
continue;
+ /* Apply default for bypass mode */
+ if (!arizona->pdata.micbias[i].mV)
+ arizona->pdata.micbias[i].mV = 2800;
+
val = (arizona->pdata.micbias[i].mV - 1500) / 100;
+
val <<= ARIZONA_MICB1_LVL_SHIFT;
if (arizona->pdata.micbias[i].ext_cap)
@@ -526,10 +700,14 @@ int arizona_dev_init(struct arizona *arizona)
if (arizona->pdata.micbias[i].fast_start)
val |= ARIZONA_MICB1_RATE;
+ if (arizona->pdata.micbias[i].bypass)
+ val |= ARIZONA_MICB1_BYPASS;
+
regmap_update_bits(arizona->regmap,
ARIZONA_MIC_BIAS_CTRL_1 + i,
ARIZONA_MICB1_LVL_MASK |
ARIZONA_MICB1_DISCH |
+ ARIZONA_MICB1_BYPASS |
ARIZONA_MICB1_RATE, val);
}
@@ -610,10 +788,9 @@ err_irq:
arizona_irq_exit(arizona);
err_reset:
if (arizona->pdata.reset) {
- gpio_set_value_cansleep(arizona->pdata.reset, 1);
+ gpio_set_value_cansleep(arizona->pdata.reset, 0);
gpio_free(arizona->pdata.reset);
}
-err_dcvdd:
regulator_disable(arizona->dcvdd);
err_enable:
regulator_bulk_disable(arizona->num_core_supplies,
diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index 2bec5f0db3e..64cd9b6dac9 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -94,6 +94,7 @@ static irqreturn_t arizona_ctrlif_err(int irq, void *data)
static irqreturn_t arizona_irq_thread(int irq, void *data)
{
struct arizona *arizona = data;
+ bool poll;
unsigned int val;
int ret;
@@ -103,20 +104,39 @@ static irqreturn_t arizona_irq_thread(int irq, void *data)
return IRQ_NONE;
}
- /* Always handle the AoD domain */
- handle_nested_irq(irq_find_mapping(arizona->virq, 0));
+ do {
+ poll = false;
+
+ /* Always handle the AoD domain */
+ handle_nested_irq(irq_find_mapping(arizona->virq, 0));
+
+ /*
+ * Check if one of the main interrupts is asserted and only
+ * check that domain if it is.
+ */
+ ret = regmap_read(arizona->regmap, ARIZONA_IRQ_PIN_STATUS,
+ &val);
+ if (ret == 0 && val & ARIZONA_IRQ1_STS) {
+ handle_nested_irq(irq_find_mapping(arizona->virq, 1));
+ } else if (ret != 0) {
+ dev_err(arizona->dev,
+ "Failed to read main IRQ status: %d\n", ret);
+ }
- /*
- * Check if one of the main interrupts is asserted and only
- * check that domain if it is.
- */
- ret = regmap_read(arizona->regmap, ARIZONA_IRQ_PIN_STATUS, &val);
- if (ret == 0 && val & ARIZONA_IRQ1_STS) {
- handle_nested_irq(irq_find_mapping(arizona->virq, 1));
- } else if (ret != 0) {
- dev_err(arizona->dev, "Failed to read main IRQ status: %d\n",
- ret);
- }
+ /*
+ * Poll the IRQ pin status to see if we're really done
+ * if the interrupt controller can't do it for us.
+ */
+ if (!arizona->pdata.irq_gpio) {
+ break;
+ } else if (arizona->pdata.irq_flags & IRQF_TRIGGER_RISING &&
+ gpio_get_value_cansleep(arizona->pdata.irq_gpio)) {
+ poll = true;
+ } else if (arizona->pdata.irq_flags & IRQF_TRIGGER_FALLING &&
+ !gpio_get_value_cansleep(arizona->pdata.irq_gpio)) {
+ poll = true;
+ }
+ } while (poll);
pm_runtime_mark_last_busy(arizona->dev);
pm_runtime_put_autosuspend(arizona->dev);
@@ -169,6 +189,7 @@ int arizona_irq_init(struct arizona *arizona)
int ret, i;
const struct regmap_irq_chip *aod, *irq;
bool ctrlif_error = true;
+ struct irq_data *irq_data;
switch (arizona->type) {
#ifdef CONFIG_MFD_WM5102
@@ -192,7 +213,36 @@ int arizona_irq_init(struct arizona *arizona)
return -EINVAL;
}
- if (arizona->pdata.irq_active_high) {
+ /* Disable all wake sources by default */
+ regmap_write(arizona->regmap, ARIZONA_WAKE_CONTROL, 0);
+
+ /* Read the flags from the interrupt controller if not specified */
+ if (!arizona->pdata.irq_flags) {
+ irq_data = irq_get_irq_data(arizona->irq);
+ if (!irq_data) {
+ dev_err(arizona->dev, "Invalid IRQ: %d\n",
+ arizona->irq);
+ return -EINVAL;
+ }
+
+ arizona->pdata.irq_flags = irqd_get_trigger_type(irq_data);
+ switch (arizona->pdata.irq_flags) {
+ case IRQF_TRIGGER_LOW:
+ case IRQF_TRIGGER_HIGH:
+ case IRQF_TRIGGER_RISING:
+ case IRQF_TRIGGER_FALLING:
+ break;
+
+ case IRQ_TYPE_NONE:
+ default:
+ /* Device default */
+ arizona->pdata.irq_flags = IRQF_TRIGGER_LOW;
+ break;
+ }
+ }
+
+ if (arizona->pdata.irq_flags & (IRQF_TRIGGER_HIGH |
+ IRQF_TRIGGER_RISING)) {
ret = regmap_update_bits(arizona->regmap, ARIZONA_IRQ_CTRL_1,
ARIZONA_IRQ_POL, 0);
if (ret != 0) {
@@ -200,12 +250,10 @@ int arizona_irq_init(struct arizona *arizona)
ret);
goto err;
}
-
- flags |= IRQF_TRIGGER_HIGH;
- } else {
- flags |= IRQF_TRIGGER_LOW;
}
+ flags |= arizona->pdata.irq_flags;
+
/* Allocate a virtual IRQ domain to distribute to the regmap domains */
arizona->virq = irq_domain_add_linear(NULL, 2, &arizona_domain_ops,
arizona);
@@ -257,11 +305,31 @@ int arizona_irq_init(struct arizona *arizona)
}
}
+ /* Used to emulate edge trigger and to work around broken pinmux */
+ if (arizona->pdata.irq_gpio) {
+ if (gpio_to_irq(arizona->pdata.irq_gpio) != arizona->irq) {
+ dev_warn(arizona->dev, "IRQ %d is not GPIO %d (%d)\n",
+ arizona->irq, arizona->pdata.irq_gpio,
+ gpio_to_irq(arizona->pdata.irq_gpio));
+ arizona->irq = gpio_to_irq(arizona->pdata.irq_gpio);
+ }
+
+ ret = devm_gpio_request_one(arizona->dev,
+ arizona->pdata.irq_gpio,
+ GPIOF_IN, "arizona IRQ");
+ if (ret != 0) {
+ dev_err(arizona->dev,
+ "Failed to request IRQ GPIO %d:: %d\n",
+ arizona->pdata.irq_gpio, ret);
+ arizona->pdata.irq_gpio = 0;
+ }
+ }
+
ret = request_threaded_irq(arizona->irq, NULL, arizona_irq_thread,
flags, "arizona", arizona);
if (ret != 0) {
- dev_err(arizona->dev, "Failed to request IRQ %d: %d\n",
+ dev_err(arizona->dev, "Failed to request primary IRQ %d: %d\n",
arizona->irq, ret);
goto err_main_irq;
}
diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
index 1b9fdd698b0..b57e642d2b4 100644
--- a/drivers/mfd/arizona-spi.c
+++ b/drivers/mfd/arizona-spi.c
@@ -67,7 +67,7 @@ static int arizona_spi_probe(struct spi_device *spi)
static int arizona_spi_remove(struct spi_device *spi)
{
- struct arizona *arizona = dev_get_drvdata(&spi->dev);
+ struct arizona *arizona = spi_get_drvdata(spi);
arizona_dev_exit(arizona);
return 0;
}
diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c
index e994c969112..01e41416270 100644
--- a/drivers/mfd/as3711.c
+++ b/drivers/mfd/as3711.c
@@ -112,16 +112,34 @@ static const struct regmap_config as3711_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
+#ifdef CONFIG_OF
+static struct of_device_id as3711_of_match[] = {
+ {.compatible = "ams,as3711",},
+ {}
+};
+MODULE_DEVICE_TABLE(of, as3711_of_match);
+#endif
+
static int as3711_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct as3711 *as3711;
- struct as3711_platform_data *pdata = client->dev.platform_data;
+ struct as3711_platform_data *pdata;
unsigned int id1, id2;
int ret;
- if (!pdata)
- dev_dbg(&client->dev, "Platform data not found\n");
+ if (!client->dev.of_node) {
+ pdata = client->dev.platform_data;
+ if (!pdata)
+ dev_dbg(&client->dev, "Platform data not found\n");
+ } else {
+ pdata = devm_kzalloc(&client->dev,
+ sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&client->dev, "Failed to allocate pdata\n");
+ return -ENOMEM;
+ }
+ }
as3711 = devm_kzalloc(&client->dev, sizeof(struct as3711), GFP_KERNEL);
if (!as3711) {
@@ -193,7 +211,8 @@ static struct i2c_driver as3711_i2c_driver = {
.driver = {
.name = "as3711",
.owner = THIS_MODULE,
- },
+ .of_match_table = of_match_ptr(as3711_of_match),
+ },
.probe = as3711_i2c_probe,
.remove = as3711_i2c_remove,
.id_table = as3711_i2c_id,
diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
new file mode 100644
index 00000000000..10cd14e35eb
--- /dev/null
+++ b/drivers/mfd/cros_ec.c
@@ -0,0 +1,196 @@
+/*
+ * ChromeOS EC multi-function device
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * The ChromeOS EC multi function device is used to mux all the requests
+ * to the EC device for its multiple features: keyboard controller,
+ * battery charging and regulator control, firmware update.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+
+int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
+ struct cros_ec_msg *msg)
+{
+ uint8_t *out;
+ int csum, i;
+
+ BUG_ON(msg->out_len > EC_HOST_PARAM_SIZE);
+ out = ec_dev->dout;
+ out[0] = EC_CMD_VERSION0 + msg->version;
+ out[1] = msg->cmd;
+ out[2] = msg->out_len;
+ csum = out[0] + out[1] + out[2];
+ for (i = 0; i < msg->out_len; i++)
+ csum += out[EC_MSG_TX_HEADER_BYTES + i] = msg->out_buf[i];
+ out[EC_MSG_TX_HEADER_BYTES + msg->out_len] = (uint8_t)(csum & 0xff);
+
+ return EC_MSG_TX_PROTO_BYTES + msg->out_len;
+}
+EXPORT_SYMBOL(cros_ec_prepare_tx);
+
+static int cros_ec_command_sendrecv(struct cros_ec_device *ec_dev,
+ uint16_t cmd, void *out_buf, int out_len,
+ void *in_buf, int in_len)
+{
+ struct cros_ec_msg msg;
+
+ msg.version = cmd >> 8;
+ msg.cmd = cmd & 0xff;
+ msg.out_buf = out_buf;
+ msg.out_len = out_len;
+ msg.in_buf = in_buf;
+ msg.in_len = in_len;
+
+ return ec_dev->command_xfer(ec_dev, &msg);
+}
+
+static int cros_ec_command_recv(struct cros_ec_device *ec_dev,
+ uint16_t cmd, void *buf, int buf_len)
+{
+ return cros_ec_command_sendrecv(ec_dev, cmd, NULL, 0, buf, buf_len);
+}
+
+static int cros_ec_command_send(struct cros_ec_device *ec_dev,
+ uint16_t cmd, void *buf, int buf_len)
+{
+ return cros_ec_command_sendrecv(ec_dev, cmd, buf, buf_len, NULL, 0);
+}
+
+static irqreturn_t ec_irq_thread(int irq, void *data)
+{
+ struct cros_ec_device *ec_dev = data;
+
+ if (device_may_wakeup(ec_dev->dev))
+ pm_wakeup_event(ec_dev->dev, 0);
+
+ blocking_notifier_call_chain(&ec_dev->event_notifier, 1, ec_dev);
+
+ return IRQ_HANDLED;
+}
+
+static struct mfd_cell cros_devs[] = {
+ {
+ .name = "cros-ec-keyb",
+ .id = 1,
+ .of_compatible = "google,cros-ec-keyb",
+ },
+};
+
+int cros_ec_register(struct cros_ec_device *ec_dev)
+{
+ struct device *dev = ec_dev->dev;
+ int err = 0;
+
+ BLOCKING_INIT_NOTIFIER_HEAD(&ec_dev->event_notifier);
+
+ ec_dev->command_send = cros_ec_command_send;
+ ec_dev->command_recv = cros_ec_command_recv;
+ ec_dev->command_sendrecv = cros_ec_command_sendrecv;
+
+ if (ec_dev->din_size) {
+ ec_dev->din = kmalloc(ec_dev->din_size, GFP_KERNEL);
+ if (!ec_dev->din) {
+ err = -ENOMEM;
+ goto fail_din;
+ }
+ }
+ if (ec_dev->dout_size) {
+ ec_dev->dout = kmalloc(ec_dev->dout_size, GFP_KERNEL);
+ if (!ec_dev->dout) {
+ err = -ENOMEM;
+ goto fail_dout;
+ }
+ }
+
+ if (!ec_dev->irq) {
+ dev_dbg(dev, "no valid IRQ: %d\n", ec_dev->irq);
+ goto fail_irq;
+ }
+
+ err = request_threaded_irq(ec_dev->irq, NULL, ec_irq_thread,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "chromeos-ec", ec_dev);
+ if (err) {
+ dev_err(dev, "request irq %d: error %d\n", ec_dev->irq, err);
+ goto fail_irq;
+ }
+
+ err = mfd_add_devices(dev, 0, cros_devs,
+ ARRAY_SIZE(cros_devs),
+ NULL, ec_dev->irq, NULL);
+ if (err) {
+ dev_err(dev, "failed to add mfd devices\n");
+ goto fail_mfd;
+ }
+
+ dev_info(dev, "Chrome EC (%s)\n", ec_dev->name);
+
+ return 0;
+
+fail_mfd:
+ free_irq(ec_dev->irq, ec_dev);
+fail_irq:
+ kfree(ec_dev->dout);
+fail_dout:
+ kfree(ec_dev->din);
+fail_din:
+ return err;
+}
+EXPORT_SYMBOL(cros_ec_register);
+
+int cros_ec_remove(struct cros_ec_device *ec_dev)
+{
+ mfd_remove_devices(ec_dev->dev);
+ free_irq(ec_dev->irq, ec_dev);
+ kfree(ec_dev->dout);
+ kfree(ec_dev->din);
+
+ return 0;
+}
+EXPORT_SYMBOL(cros_ec_remove);
+
+#ifdef CONFIG_PM_SLEEP
+int cros_ec_suspend(struct cros_ec_device *ec_dev)
+{
+ struct device *dev = ec_dev->dev;
+
+ if (device_may_wakeup(dev))
+ ec_dev->wake_enabled = !enable_irq_wake(ec_dev->irq);
+
+ disable_irq(ec_dev->irq);
+ ec_dev->was_wake_device = ec_dev->wake_enabled;
+
+ return 0;
+}
+EXPORT_SYMBOL(cros_ec_suspend);
+
+int cros_ec_resume(struct cros_ec_device *ec_dev)
+{
+ enable_irq(ec_dev->irq);
+
+ if (ec_dev->wake_enabled) {
+ disable_irq_wake(ec_dev->irq);
+ ec_dev->wake_enabled = 0;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(cros_ec_resume);
+
+#endif
diff --git a/drivers/mfd/cros_ec_i2c.c b/drivers/mfd/cros_ec_i2c.c
new file mode 100644
index 00000000000..123044608b6
--- /dev/null
+++ b/drivers/mfd/cros_ec_i2c.c
@@ -0,0 +1,201 @@
+/*
+ * ChromeOS EC multi-function device (I2C)
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+static inline struct cros_ec_device *to_ec_dev(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ return i2c_get_clientdata(client);
+}
+
+static int cros_ec_command_xfer(struct cros_ec_device *ec_dev,
+ struct cros_ec_msg *msg)
+{
+ struct i2c_client *client = ec_dev->priv;
+ int ret = -ENOMEM;
+ int i;
+ int packet_len;
+ u8 *out_buf = NULL;
+ u8 *in_buf = NULL;
+ u8 sum;
+ struct i2c_msg i2c_msg[2];
+
+ i2c_msg[0].addr = client->addr;
+ i2c_msg[0].flags = 0;
+ i2c_msg[1].addr = client->addr;
+ i2c_msg[1].flags = I2C_M_RD;
+
+ /*
+ * allocate larger packet (one byte for checksum, one byte for
+ * length, and one for result code)
+ */
+ packet_len = msg->in_len + 3;
+ in_buf = kzalloc(packet_len, GFP_KERNEL);
+ if (!in_buf)
+ goto done;
+ i2c_msg[1].len = packet_len;
+ i2c_msg[1].buf = (char *)in_buf;
+
+ /*
+ * allocate larger packet (one byte for checksum, one for
+ * command code, one for length, and one for command version)
+ */
+ packet_len = msg->out_len + 4;
+ out_buf = kzalloc(packet_len, GFP_KERNEL);
+ if (!out_buf)
+ goto done;
+ i2c_msg[0].len = packet_len;
+ i2c_msg[0].buf = (char *)out_buf;
+
+ out_buf[0] = EC_CMD_VERSION0 + msg->version;
+ out_buf[1] = msg->cmd;
+ out_buf[2] = msg->out_len;
+
+ /* copy message payload and compute checksum */
+ sum = out_buf[0] + out_buf[1] + out_buf[2];
+ for (i = 0; i < msg->out_len; i++) {
+ out_buf[3 + i] = msg->out_buf[i];
+ sum += out_buf[3 + i];
+ }
+ out_buf[3 + msg->out_len] = sum;
+
+ /* send command to EC and read answer */
+ ret = i2c_transfer(client->adapter, i2c_msg, 2);
+ if (ret < 0) {
+ dev_err(ec_dev->dev, "i2c transfer failed: %d\n", ret);
+ goto done;
+ } else if (ret != 2) {
+ dev_err(ec_dev->dev, "failed to get response: %d\n", ret);
+ ret = -EIO;
+ goto done;
+ }
+
+ /* check response error code */
+ if (i2c_msg[1].buf[0]) {
+ dev_warn(ec_dev->dev, "command 0x%02x returned an error %d\n",
+ msg->cmd, i2c_msg[1].buf[0]);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ /* copy response packet payload and compute checksum */
+ sum = in_buf[0] + in_buf[1];
+ for (i = 0; i < msg->in_len; i++) {
+ msg->in_buf[i] = in_buf[2 + i];
+ sum += in_buf[2 + i];
+ }
+ dev_dbg(ec_dev->dev, "packet: %*ph, sum = %02x\n",
+ i2c_msg[1].len, in_buf, sum);
+ if (sum != in_buf[2 + msg->in_len]) {
+ dev_err(ec_dev->dev, "bad packet checksum\n");
+ ret = -EBADMSG;
+ goto done;
+ }
+
+ ret = 0;
+ done:
+ kfree(in_buf);
+ kfree(out_buf);
+ return ret;
+}
+
+static int cros_ec_probe_i2c(struct i2c_client *client,
+ const struct i2c_device_id *dev_id)
+{
+ struct device *dev = &client->dev;
+ struct cros_ec_device *ec_dev = NULL;
+ int err;
+
+ ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
+ if (!ec_dev)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, ec_dev);
+ ec_dev->name = "I2C";
+ ec_dev->dev = dev;
+ ec_dev->priv = client;
+ ec_dev->irq = client->irq;
+ ec_dev->command_xfer = cros_ec_command_xfer;
+ ec_dev->ec_name = client->name;
+ ec_dev->phys_name = client->adapter->name;
+ ec_dev->parent = &client->dev;
+
+ err = cros_ec_register(ec_dev);
+ if (err) {
+ dev_err(dev, "cannot register EC\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static int cros_ec_remove_i2c(struct i2c_client *client)
+{
+ struct cros_ec_device *ec_dev = i2c_get_clientdata(client);
+
+ cros_ec_remove(ec_dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cros_ec_i2c_suspend(struct device *dev)
+{
+ struct cros_ec_device *ec_dev = to_ec_dev(dev);
+
+ return cros_ec_suspend(ec_dev);
+}
+
+static int cros_ec_i2c_resume(struct device *dev)
+{
+ struct cros_ec_device *ec_dev = to_ec_dev(dev);
+
+ return cros_ec_resume(ec_dev);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_ec_i2c_pm_ops, cros_ec_i2c_suspend,
+ cros_ec_i2c_resume);
+
+static const struct i2c_device_id cros_ec_i2c_id[] = {
+ { "cros-ec-i2c", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, cros_ec_i2c_id);
+
+static struct i2c_driver cros_ec_driver = {
+ .driver = {
+ .name = "cros-ec-i2c",
+ .owner = THIS_MODULE,
+ .pm = &cros_ec_i2c_pm_ops,
+ },
+ .probe = cros_ec_probe_i2c,
+ .remove = cros_ec_remove_i2c,
+ .id_table = cros_ec_i2c_id,
+};
+
+module_i2c_driver(cros_ec_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC multi function device");
diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
new file mode 100644
index 00000000000..19193cf1e7a
--- /dev/null
+++ b/drivers/mfd/cros_ec_spi.c
@@ -0,0 +1,375 @@
+/*
+ * ChromeOS EC multi-function device (SPI)
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+
+
+/* The header byte, which follows the preamble */
+#define EC_MSG_HEADER 0xec
+
+/*
+ * Number of EC preamble bytes we read at a time. Since it takes
+ * about 400-500us for the EC to respond there is not a lot of
+ * point in tuning this. If the EC could respond faster then
+ * we could increase this so that might expect the preamble and
+ * message to occur in a single transaction. However, the maximum
+ * SPI transfer size is 256 bytes, so at 5MHz we need a response
+ * time of perhaps <320us (200 bytes / 1600 bits).
+ */
+#define EC_MSG_PREAMBLE_COUNT 32
+
+/*
+ * We must get a response from the EC in 5ms. This is a very long
+ * time, but the flash write command can take 2-3ms. The EC command
+ * processing is currently not very fast (about 500us). We could
+ * look at speeding this up and making the flash write command a
+ * 'slow' command, requiring a GET_STATUS wait loop, like flash
+ * erase.
+ */
+#define EC_MSG_DEADLINE_MS 5
+
+/*
+ * Time between raising the SPI chip select (for the end of a
+ * transaction) and dropping it again (for the next transaction).
+ * If we go too fast, the EC will miss the transaction. It seems
+ * that 50us is enough with the 16MHz STM32 EC.
+ */
+#define EC_SPI_RECOVERY_TIME_NS (50 * 1000)
+
+/**
+ * struct cros_ec_spi - information about a SPI-connected EC
+ *
+ * @spi: SPI device we are connected to
+ * @last_transfer_ns: time that we last finished a transfer, or 0 if there
+ * if no record
+ */
+struct cros_ec_spi {
+ struct spi_device *spi;
+ s64 last_transfer_ns;
+};
+
+static void debug_packet(struct device *dev, const char *name, u8 *ptr,
+ int len)
+{
+#ifdef DEBUG
+ int i;
+
+ dev_dbg(dev, "%s: ", name);
+ for (i = 0; i < len; i++)
+ dev_cont(dev, " %02x", ptr[i]);
+#endif
+}
+
+/**
+ * cros_ec_spi_receive_response - Receive a response from the EC.
+ *
+ * This function has two phases: reading the preamble bytes (since if we read
+ * data from the EC before it is ready to send, we just get preamble) and
+ * reading the actual message.
+ *
+ * The received data is placed into ec_dev->din.
+ *
+ * @ec_dev: ChromeOS EC device
+ * @need_len: Number of message bytes we need to read
+ */
+static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
+ int need_len)
+{
+ struct cros_ec_spi *ec_spi = ec_dev->priv;
+ struct spi_transfer trans;
+ struct spi_message msg;
+ u8 *ptr, *end;
+ int ret;
+ unsigned long deadline;
+ int todo;
+
+ /* Receive data until we see the header byte */
+ deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS);
+ do {
+ memset(&trans, '\0', sizeof(trans));
+ trans.cs_change = 1;
+ trans.rx_buf = ptr = ec_dev->din;
+ trans.len = EC_MSG_PREAMBLE_COUNT;
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&trans, &msg);
+ ret = spi_sync(ec_spi->spi, &msg);
+ if (ret < 0) {
+ dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
+ return ret;
+ }
+
+ for (end = ptr + EC_MSG_PREAMBLE_COUNT; ptr != end; ptr++) {
+ if (*ptr == EC_MSG_HEADER) {
+ dev_dbg(ec_dev->dev, "msg found at %ld\n",
+ ptr - ec_dev->din);
+ break;
+ }
+ }
+
+ if (time_after(jiffies, deadline)) {
+ dev_warn(ec_dev->dev, "EC failed to respond in time\n");
+ return -ETIMEDOUT;
+ }
+ } while (ptr == end);
+
+ /*
+ * ptr now points to the header byte. Copy any valid data to the
+ * start of our buffer
+ */
+ todo = end - ++ptr;
+ BUG_ON(todo < 0 || todo > ec_dev->din_size);
+ todo = min(todo, need_len);
+ memmove(ec_dev->din, ptr, todo);
+ ptr = ec_dev->din + todo;
+ dev_dbg(ec_dev->dev, "need %d, got %d bytes from preamble\n",
+ need_len, todo);
+ need_len -= todo;
+
+ /* Receive data until we have it all */
+ while (need_len > 0) {
+ /*
+ * We can't support transfers larger than the SPI FIFO size
+ * unless we have DMA. We don't have DMA on the ISP SPI ports
+ * for Exynos. We need a way of asking SPI driver for
+ * maximum-supported transfer size.
+ */
+ todo = min(need_len, 256);
+ dev_dbg(ec_dev->dev, "loop, todo=%d, need_len=%d, ptr=%ld\n",
+ todo, need_len, ptr - ec_dev->din);
+
+ memset(&trans, '\0', sizeof(trans));
+ trans.cs_change = 1;
+ trans.rx_buf = ptr;
+ trans.len = todo;
+ spi_message_init(&msg);
+ spi_message_add_tail(&trans, &msg);
+
+ /* send command to EC and read answer */
+ BUG_ON((u8 *)trans.rx_buf - ec_dev->din + todo >
+ ec_dev->din_size);
+ ret = spi_sync(ec_spi->spi, &msg);
+ if (ret < 0) {
+ dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
+ return ret;
+ }
+
+ debug_packet(ec_dev->dev, "interim", ptr, todo);
+ ptr += todo;
+ need_len -= todo;
+ }
+
+ dev_dbg(ec_dev->dev, "loop done, ptr=%ld\n", ptr - ec_dev->din);
+
+ return 0;
+}
+
+/**
+ * cros_ec_command_spi_xfer - Transfer a message over SPI and receive the reply
+ *
+ * @ec_dev: ChromeOS EC device
+ * @ec_msg: Message to transfer
+ */
+static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
+ struct cros_ec_msg *ec_msg)
+{
+ struct cros_ec_spi *ec_spi = ec_dev->priv;
+ struct spi_transfer trans;
+ struct spi_message msg;
+ int i, len;
+ u8 *ptr;
+ int sum;
+ int ret = 0, final_ret;
+ struct timespec ts;
+
+ len = cros_ec_prepare_tx(ec_dev, ec_msg);
+ dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
+
+ /* If it's too soon to do another transaction, wait */
+ if (ec_spi->last_transfer_ns) {
+ struct timespec ts;
+ unsigned long delay; /* The delay completed so far */
+
+ ktime_get_ts(&ts);
+ delay = timespec_to_ns(&ts) - ec_spi->last_transfer_ns;
+ if (delay < EC_SPI_RECOVERY_TIME_NS)
+ ndelay(delay);
+ }
+
+ /* Transmit phase - send our message */
+ debug_packet(ec_dev->dev, "out", ec_dev->dout, len);
+ memset(&trans, '\0', sizeof(trans));
+ trans.tx_buf = ec_dev->dout;
+ trans.len = len;
+ trans.cs_change = 1;
+ spi_message_init(&msg);
+ spi_message_add_tail(&trans, &msg);
+ ret = spi_sync(ec_spi->spi, &msg);
+
+ /* Get the response */
+ if (!ret) {
+ ret = cros_ec_spi_receive_response(ec_dev,
+ ec_msg->in_len + EC_MSG_TX_PROTO_BYTES);
+ } else {
+ dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
+ }
+
+ /* turn off CS */
+ spi_message_init(&msg);
+ final_ret = spi_sync(ec_spi->spi, &msg);
+ ktime_get_ts(&ts);
+ ec_spi->last_transfer_ns = timespec_to_ns(&ts);
+ if (!ret)
+ ret = final_ret;
+ if (ret < 0) {
+ dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
+ return ret;
+ }
+
+ /* check response error code */
+ ptr = ec_dev->din;
+ if (ptr[0]) {
+ dev_warn(ec_dev->dev, "command 0x%02x returned an error %d\n",
+ ec_msg->cmd, ptr[0]);
+ debug_packet(ec_dev->dev, "in_err", ptr, len);
+ return -EINVAL;
+ }
+ len = ptr[1];
+ sum = ptr[0] + ptr[1];
+ if (len > ec_msg->in_len) {
+ dev_err(ec_dev->dev, "packet too long (%d bytes, expected %d)",
+ len, ec_msg->in_len);
+ return -ENOSPC;
+ }
+
+ /* copy response packet payload and compute checksum */
+ for (i = 0; i < len; i++) {
+ sum += ptr[i + 2];
+ if (ec_msg->in_len)
+ ec_msg->in_buf[i] = ptr[i + 2];
+ }
+ sum &= 0xff;
+
+ debug_packet(ec_dev->dev, "in", ptr, len + 3);
+
+ if (sum != ptr[len + 2]) {
+ dev_err(ec_dev->dev,
+ "bad packet checksum, expected %02x, got %02x\n",
+ sum, ptr[len + 2]);
+ return -EBADMSG;
+ }
+
+ return 0;
+}
+
+static int cros_ec_probe_spi(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct cros_ec_device *ec_dev;
+ struct cros_ec_spi *ec_spi;
+ int err;
+
+ spi->bits_per_word = 8;
+ spi->mode = SPI_MODE_0;
+ err = spi_setup(spi);
+ if (err < 0)
+ return err;
+
+ ec_spi = devm_kzalloc(dev, sizeof(*ec_spi), GFP_KERNEL);
+ if (ec_spi == NULL)
+ return -ENOMEM;
+ ec_spi->spi = spi;
+ ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
+ if (!ec_dev)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, ec_dev);
+ ec_dev->name = "SPI";
+ ec_dev->dev = dev;
+ ec_dev->priv = ec_spi;
+ ec_dev->irq = spi->irq;
+ ec_dev->command_xfer = cros_ec_command_spi_xfer;
+ ec_dev->ec_name = ec_spi->spi->modalias;
+ ec_dev->phys_name = dev_name(&ec_spi->spi->dev);
+ ec_dev->parent = &ec_spi->spi->dev;
+ ec_dev->din_size = EC_MSG_BYTES + EC_MSG_PREAMBLE_COUNT;
+ ec_dev->dout_size = EC_MSG_BYTES;
+
+ err = cros_ec_register(ec_dev);
+ if (err) {
+ dev_err(dev, "cannot register EC\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static int cros_ec_remove_spi(struct spi_device *spi)
+{
+ struct cros_ec_device *ec_dev;
+
+ ec_dev = spi_get_drvdata(spi);
+ cros_ec_remove(ec_dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cros_ec_spi_suspend(struct device *dev)
+{
+ struct cros_ec_device *ec_dev = dev_get_drvdata(dev);
+
+ return cros_ec_suspend(ec_dev);
+}
+
+static int cros_ec_spi_resume(struct device *dev)
+{
+ struct cros_ec_device *ec_dev = dev_get_drvdata(dev);
+
+ return cros_ec_resume(ec_dev);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_ec_spi_pm_ops, cros_ec_spi_suspend,
+ cros_ec_spi_resume);
+
+static const struct spi_device_id cros_ec_spi_id[] = {
+ { "cros-ec-spi", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, cros_ec_spi_id);
+
+static struct spi_driver cros_ec_driver_spi = {
+ .driver = {
+ .name = "cros-ec-spi",
+ .owner = THIS_MODULE,
+ .pm = &cros_ec_spi_pm_ops,
+ },
+ .probe = cros_ec_probe_spi,
+ .remove = cros_ec_remove_spi,
+ .id_table = cros_ec_spi_id,
+};
+
+module_spi_driver(cros_ec_driver_spi);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC multi function device (SPI)");
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 05176cd2862..f1a316e0d6a 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -499,7 +499,8 @@ static int da903x_probe(struct i2c_client *client,
unsigned int tmp;
int ret;
- chip = kzalloc(sizeof(struct da903x_chip), GFP_KERNEL);
+ chip = devm_kzalloc(&client->dev, sizeof(struct da903x_chip),
+ GFP_KERNEL);
if (chip == NULL)
return -ENOMEM;
@@ -515,33 +516,27 @@ static int da903x_probe(struct i2c_client *client,
ret = chip->ops->init_chip(chip);
if (ret)
- goto out_free_chip;
+ return ret;
/* mask and clear all IRQs */
chip->events_mask = 0xffffffff;
chip->ops->mask_events(chip, chip->events_mask);
chip->ops->read_events(chip, &tmp);
- ret = request_irq(client->irq, da903x_irq_handler,
+ ret = devm_request_irq(&client->dev, client->irq, da903x_irq_handler,
IRQF_TRIGGER_FALLING,
"da903x", chip);
if (ret) {
dev_err(&client->dev, "failed to request irq %d\n",
client->irq);
- goto out_free_chip;
+ return ret;
}
ret = da903x_add_subdevs(chip, pdata);
if (ret)
- goto out_free_irq;
+ return ret;
return 0;
-
-out_free_irq:
- free_irq(client->irq, chip);
-out_free_chip:
- kfree(chip);
- return ret;
}
static int da903x_remove(struct i2c_client *client)
@@ -549,8 +544,6 @@ static int da903x_remove(struct i2c_client *client)
struct da903x_chip *chip = i2c_get_clientdata(client);
da903x_remove_subdevs(chip);
- free_irq(client->irq, chip);
- kfree(chip);
return 0;
}
diff --git a/drivers/mfd/da9052-spi.c b/drivers/mfd/da9052-spi.c
index 61d63b93576..0680bcbc53d 100644
--- a/drivers/mfd/da9052-spi.c
+++ b/drivers/mfd/da9052-spi.c
@@ -38,7 +38,7 @@ static int da9052_spi_probe(struct spi_device *spi)
da9052->dev = &spi->dev;
da9052->chip_irq = spi->irq;
- dev_set_drvdata(&spi->dev, da9052);
+ spi_set_drvdata(spi, da9052);
da9052_regmap_config.read_flag_mask = 1;
da9052_regmap_config.write_flag_mask = 0;
@@ -60,7 +60,7 @@ static int da9052_spi_probe(struct spi_device *spi)
static int da9052_spi_remove(struct spi_device *spi)
{
- struct da9052 *da9052 = dev_get_drvdata(&spi->dev);
+ struct da9052 *da9052 = spi_get_drvdata(spi);
da9052_device_exit(da9052);
return 0;
diff --git a/drivers/mfd/da9055-core.c b/drivers/mfd/da9055-core.c
index f56a1a9f777..49cb23d3746 100644
--- a/drivers/mfd/da9055-core.c
+++ b/drivers/mfd/da9055-core.c
@@ -391,7 +391,7 @@ int da9055_device_init(struct da9055 *da9055)
da9055->irq_base = pdata->irq_base;
ret = regmap_add_irq_chip(da9055->regmap, da9055->chip_irq,
- IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
da9055->irq_base, &da9055_regmap_irq_chip,
&da9055->irq_data);
if (ret < 0)
diff --git a/drivers/mfd/davinci_voicecodec.c b/drivers/mfd/davinci_voicecodec.c
index c0bcc872af4..c60ab0c3c4d 100644
--- a/drivers/mfd/davinci_voicecodec.c
+++ b/drivers/mfd/davinci_voicecodec.c
@@ -177,17 +177,7 @@ static struct platform_driver davinci_vc_driver = {
.remove = davinci_vc_remove,
};
-static int __init davinci_vc_init(void)
-{
- return platform_driver_probe(&davinci_vc_driver, davinci_vc_probe);
-}
-module_init(davinci_vc_init);
-
-static void __exit davinci_vc_exit(void)
-{
- platform_driver_unregister(&davinci_vc_driver);
-}
-module_exit(davinci_vc_exit);
+module_platform_driver_probe(davinci_vc_driver, davinci_vc_probe);
MODULE_AUTHOR("Miguel Aguilar");
MODULE_DESCRIPTION("Texas Instruments DaVinci Voice Codec Core Interface");
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 21434beb420..319b8abe742 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -24,6 +24,7 @@
#include <linux/jiffies.h>
#include <linux/bitops.h>
#include <linux/fs.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include <linux/mfd/core.h>
@@ -2704,6 +2705,7 @@ static void dbx500_fw_version_init(struct platform_device *pdev,
{
struct resource *res;
void __iomem *tcpm_base;
+ u32 version;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"prcmu-tcpm");
@@ -2713,26 +2715,27 @@ static void dbx500_fw_version_init(struct platform_device *pdev,
return;
}
tcpm_base = ioremap(res->start, resource_size(res));
- if (tcpm_base != NULL) {
- u32 version;
-
- version = readl(tcpm_base + version_offset);
- fw_info.version.project = (version & 0xFF);
- fw_info.version.api_version = (version >> 8) & 0xFF;
- fw_info.version.func_version = (version >> 16) & 0xFF;
- fw_info.version.errata = (version >> 24) & 0xFF;
- strncpy(fw_info.version.project_name,
- fw_project_name(fw_info.version.project),
- PRCMU_FW_PROJECT_NAME_LEN);
- fw_info.valid = true;
- pr_info("PRCMU firmware: %s(%d), version %d.%d.%d\n",
- fw_info.version.project_name,
- fw_info.version.project,
- fw_info.version.api_version,
- fw_info.version.func_version,
- fw_info.version.errata);
- iounmap(tcpm_base);
+ if (!tcpm_base) {
+ dev_err(&pdev->dev, "no prcmu tcpm mem region provided\n");
+ return;
}
+
+ version = readl(tcpm_base + version_offset);
+ fw_info.version.project = (version & 0xFF);
+ fw_info.version.api_version = (version >> 8) & 0xFF;
+ fw_info.version.func_version = (version >> 16) & 0xFF;
+ fw_info.version.errata = (version >> 24) & 0xFF;
+ strncpy(fw_info.version.project_name,
+ fw_project_name(fw_info.version.project),
+ PRCMU_FW_PROJECT_NAME_LEN);
+ fw_info.valid = true;
+ pr_info("PRCMU firmware: %s(%d), version %d.%d.%d\n",
+ fw_info.version.project_name,
+ fw_info.version.project,
+ fw_info.version.api_version,
+ fw_info.version.func_version,
+ fw_info.version.errata);
+ iounmap(tcpm_base);
}
void __init db8500_prcmu_early_init(u32 phy_base, u32 size)
@@ -3065,6 +3068,15 @@ static struct db8500_thsens_platform_data db8500_thsens_data = {
.num_trips = 4,
};
+static struct mfd_cell common_prcmu_devs[] = {
+ {
+ .name = "ux500_wdt",
+ .platform_data = &db8500_wdt_pdata,
+ .pdata_size = sizeof(db8500_wdt_pdata),
+ .id = -1,
+ },
+};
+
static struct mfd_cell db8500_prcmu_devs[] = {
{
.name = "db8500-prcmu-regulators",
@@ -3079,12 +3091,6 @@ static struct mfd_cell db8500_prcmu_devs[] = {
.pdata_size = sizeof(db8500_cpufreq_table),
},
{
- .name = "ux500_wdt",
- .platform_data = &db8500_wdt_pdata,
- .pdata_size = sizeof(db8500_wdt_pdata),
- .id = -1,
- },
- {
.name = "db8500-thermal",
.num_resources = ARRAY_SIZE(db8500_thsens_resources),
.resources = db8500_thsens_resources,
@@ -3173,13 +3179,25 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
db8500_prcmu_update_cpufreq();
- err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
- ARRAY_SIZE(db8500_prcmu_devs), NULL, 0, db8500_irq_domain);
+ err = mfd_add_devices(&pdev->dev, 0, common_prcmu_devs,
+ ARRAY_SIZE(common_prcmu_devs), NULL, 0, db8500_irq_domain);
if (err) {
pr_err("prcmu: Failed to add subdevices\n");
return err;
}
+ /* TODO: Remove restriction when clk definitions are available. */
+ if (!of_machine_is_compatible("st-ericsson,u8540")) {
+ err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
+ ARRAY_SIZE(db8500_prcmu_devs), NULL, 0,
+ db8500_irq_domain);
+ if (err) {
+ mfd_remove_devices(&pdev->dev);
+ pr_err("prcmu: Failed to add subdevices\n");
+ goto no_irq_return;
+ }
+ }
+
err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata,
pdata->ab_irq);
if (err) {
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index b7a61f0f27a..5502106ad51 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -393,7 +393,7 @@ static int pcap_add_subdev(struct pcap_chip *pcap,
static int ezx_pcap_remove(struct spi_device *spi)
{
- struct pcap_chip *pcap = dev_get_drvdata(&spi->dev);
+ struct pcap_chip *pcap = spi_get_drvdata(spi);
struct pcap_platform_data *pdata = spi->dev.platform_data;
int i, adc_irq;
@@ -403,7 +403,7 @@ static int ezx_pcap_remove(struct spi_device *spi)
/* cleanup ADC */
adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
- free_irq(adc_irq, pcap);
+ devm_free_irq(&spi->dev, adc_irq, pcap);
mutex_lock(&pcap->adc_mutex);
for (i = 0; i < PCAP_ADC_MAXQ; i++)
kfree(pcap->adc_queue[i]);
@@ -415,8 +415,6 @@ static int ezx_pcap_remove(struct spi_device *spi)
destroy_workqueue(pcap->workqueue);
- kfree(pcap);
-
return 0;
}
@@ -431,7 +429,7 @@ static int ezx_pcap_probe(struct spi_device *spi)
if (!pdata)
goto ret;
- pcap = kzalloc(sizeof(*pcap), GFP_KERNEL);
+ pcap = devm_kzalloc(&spi->dev, sizeof(*pcap), GFP_KERNEL);
if (!pcap) {
ret = -ENOMEM;
goto ret;
@@ -441,14 +439,14 @@ static int ezx_pcap_probe(struct spi_device *spi)
mutex_init(&pcap->adc_mutex);
INIT_WORK(&pcap->isr_work, pcap_isr_work);
INIT_WORK(&pcap->msr_work, pcap_msr_work);
- dev_set_drvdata(&spi->dev, pcap);
+ spi_set_drvdata(spi, pcap);
/* setup spi */
spi->bits_per_word = 32;
spi->mode = SPI_MODE_0 | (pdata->config & PCAP_CS_AH ? SPI_CS_HIGH : 0);
ret = spi_setup(spi);
if (ret)
- goto free_pcap;
+ goto ret;
pcap->spi = spi;
@@ -458,7 +456,7 @@ static int ezx_pcap_probe(struct spi_device *spi)
if (!pcap->workqueue) {
ret = -ENOMEM;
dev_err(&spi->dev, "can't create pcap thread\n");
- goto free_pcap;
+ goto ret;
}
/* redirect interrupts to AP, except adcdone2 */
@@ -491,7 +489,8 @@ static int ezx_pcap_probe(struct spi_device *spi)
adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
- ret = request_irq(adc_irq, pcap_adc_irq, 0, "ADC", pcap);
+ ret = devm_request_irq(&spi->dev, adc_irq, pcap_adc_irq, 0, "ADC",
+ pcap);
if (ret)
goto free_irqchip;
@@ -511,14 +510,12 @@ static int ezx_pcap_probe(struct spi_device *spi)
remove_subdevs:
device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
/* free_adc: */
- free_irq(adc_irq, pcap);
+ devm_free_irq(&spi->dev, adc_irq, pcap);
free_irqchip:
for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++)
irq_set_chip_and_handler(i, NULL, NULL);
/* destroy_workqueue: */
destroy_workqueue(pcap->workqueue);
-free_pcap:
- kfree(pcap);
ret:
return ret;
}
diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c
index 9e5453d21a6..0285fceb99a 100644
--- a/drivers/mfd/htc-pasic3.c
+++ b/drivers/mfd/htc-pasic3.c
@@ -208,18 +208,7 @@ static struct platform_driver pasic3_driver = {
.remove = pasic3_remove,
};
-static int __init pasic3_base_init(void)
-{
- return platform_driver_probe(&pasic3_driver, pasic3_probe);
-}
-
-static void __exit pasic3_base_exit(void)
-{
- platform_driver_unregister(&pasic3_driver);
-}
-
-module_init(pasic3_base_init);
-module_exit(pasic3_base_exit);
+module_platform_driver_probe(pasic3_driver, pasic3_probe);
MODULE_AUTHOR("Philipp Zabel <philipp.zabel@gmail.com>");
MODULE_DESCRIPTION("Core driver for HTC PASIC3");
diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c
index 1804331bd52..5be3b5e1385 100644
--- a/drivers/mfd/intel_msic.c
+++ b/drivers/mfd/intel_msic.c
@@ -323,7 +323,8 @@ static int intel_msic_init_devices(struct intel_msic *msic)
if (pdata->ocd) {
unsigned gpio = pdata->ocd->gpio;
- ret = gpio_request_one(gpio, GPIOF_IN, "ocd_gpio");
+ ret = devm_gpio_request_one(&pdev->dev, gpio,
+ GPIOF_IN, "ocd_gpio");
if (ret) {
dev_err(&pdev->dev, "failed to register OCD GPIO\n");
return ret;
@@ -332,7 +333,6 @@ static int intel_msic_init_devices(struct intel_msic *msic)
ret = gpio_to_irq(gpio);
if (ret < 0) {
dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n");
- gpio_free(gpio);
return ret;
}
@@ -359,8 +359,6 @@ static int intel_msic_init_devices(struct intel_msic *msic)
fail:
mfd_remove_devices(&pdev->dev);
- if (pdata->ocd)
- gpio_free(pdata->ocd->gpio);
return ret;
}
@@ -368,12 +366,8 @@ fail:
static void intel_msic_remove_devices(struct intel_msic *msic)
{
struct platform_device *pdev = msic->pdev;
- struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
mfd_remove_devices(&pdev->dev);
-
- if (pdata->ocd)
- gpio_free(pdata->ocd->gpio);
}
static int intel_msic_probe(struct platform_device *pdev)
diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index ceebf2c1ea9..4b7e6dac1de 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -496,8 +496,8 @@ static int lm3533_device_init(struct lm3533 *lm3533)
dev_set_drvdata(lm3533->dev, lm3533);
if (gpio_is_valid(lm3533->gpio_hwen)) {
- ret = gpio_request_one(lm3533->gpio_hwen, GPIOF_OUT_INIT_LOW,
- "lm3533-hwen");
+ ret = devm_gpio_request_one(lm3533->dev, lm3533->gpio_hwen,
+ GPIOF_OUT_INIT_LOW, "lm3533-hwen");
if (ret < 0) {
dev_err(lm3533->dev,
"failed to request HWEN GPIO %d\n",
@@ -528,8 +528,6 @@ err_unregister:
mfd_remove_devices(lm3533->dev);
err_disable:
lm3533_disable(lm3533);
- if (gpio_is_valid(lm3533->gpio_hwen))
- gpio_free(lm3533->gpio_hwen);
return ret;
}
@@ -542,8 +540,6 @@ static void lm3533_device_exit(struct lm3533 *lm3533)
mfd_remove_devices(lm3533->dev);
lm3533_disable(lm3533);
- if (gpio_is_valid(lm3533->gpio_hwen))
- gpio_free(lm3533->gpio_hwen);
}
static bool lm3533_readable_register(struct device *dev, unsigned int reg)
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index 4d73963cd8f..1cbb17609c8 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -46,7 +46,7 @@ static struct regmap_config max77686_regmap_config = {
#ifdef CONFIG_OF
static struct of_device_id max77686_pmic_dt_match[] = {
- {.compatible = "maxim,max77686", .data = 0},
+ {.compatible = "maxim,max77686", .data = NULL},
{},
};
diff --git a/drivers/mfd/mc13xxx-spi.c b/drivers/mfd/mc13xxx-spi.c
index 3032bae20b6..77189daadf1 100644
--- a/drivers/mfd/mc13xxx-spi.c
+++ b/drivers/mfd/mc13xxx-spi.c
@@ -131,7 +131,7 @@ static int mc13xxx_spi_probe(struct spi_device *spi)
if (!mc13xxx)
return -ENOMEM;
- dev_set_drvdata(&spi->dev, mc13xxx);
+ spi_set_drvdata(spi, mc13xxx);
spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
mc13xxx->dev = &spi->dev;
@@ -144,7 +144,7 @@ static int mc13xxx_spi_probe(struct spi_device *spi)
ret = PTR_ERR(mc13xxx->regmap);
dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n",
ret);
- dev_set_drvdata(&spi->dev, NULL);
+ spi_set_drvdata(spi, NULL);
return ret;
}
@@ -164,7 +164,7 @@ static int mc13xxx_spi_probe(struct spi_device *spi)
static int mc13xxx_spi_remove(struct spi_device *spi)
{
- struct mc13xxx *mc13xxx = dev_get_drvdata(&spi->dev);
+ struct mc13xxx *mc13xxx = spi_get_drvdata(spi);
mc13xxx_common_cleanup(mc13xxx);
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 4febc5c7fde..759fae3ca7f 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -1,8 +1,9 @@
/**
* omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com
* Author: Keshava Munegowda <keshava_mgowda@ti.com>
+ * Author: Roger Quadros <rogerq@ti.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 of
@@ -27,6 +28,9 @@
#include <linux/platform_device.h>
#include <linux/platform_data/usb-omap.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
#include "omap-usb.h"
@@ -137,6 +141,49 @@ static inline u8 usbhs_readb(void __iomem *base, u8 reg)
/*-------------------------------------------------------------------------*/
+/**
+ * Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h>
+ * to the device tree binding portN-mode found in
+ * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt'
+ */
+static const char * const port_modes[] = {
+ [OMAP_USBHS_PORT_MODE_UNUSED] = "",
+ [OMAP_EHCI_PORT_MODE_PHY] = "ehci-phy",
+ [OMAP_EHCI_PORT_MODE_TLL] = "ehci-tll",
+ [OMAP_EHCI_PORT_MODE_HSIC] = "ehci-hsic",
+ [OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0] = "ohci-phy-6pin-datse0",
+ [OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM] = "ohci-phy-6pin-dpdm",
+ [OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0] = "ohci-phy-3pin-datse0",
+ [OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM] = "ohci-phy-4pin-dpdm",
+ [OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0] = "ohci-tll-6pin-datse0",
+ [OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM] = "ohci-tll-6pin-dpdm",
+ [OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0] = "ohci-tll-3pin-datse0",
+ [OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM] = "ohci-tll-4pin-dpdm",
+ [OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0] = "ohci-tll-2pin-datse0",
+ [OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM] = "ohci-tll-2pin-dpdm",
+};
+
+/**
+ * omap_usbhs_get_dt_port_mode - Get the 'enum usbhs_omap_port_mode'
+ * from the port mode string.
+ * @mode: The port mode string, usually obtained from device tree.
+ *
+ * The function returns the 'enum usbhs_omap_port_mode' that matches the
+ * provided port mode string as per the port_modes table.
+ * If no match is found it returns -ENODEV
+ */
+static const int omap_usbhs_get_dt_port_mode(const char *mode)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(port_modes); i++) {
+ if (!strcmp(mode, port_modes[i]))
+ return i;
+ }
+
+ return -ENODEV;
+}
+
static struct platform_device *omap_usbhs_alloc_child(const char *name,
struct resource *res, int num_resources, void *pdata,
size_t pdata_size, struct device *dev)
@@ -278,7 +325,7 @@ static int usbhs_runtime_resume(struct device *dev)
dev_dbg(dev, "usbhs_runtime_resume\n");
- omap_tll_enable();
+ omap_tll_enable(pdata);
if (!IS_ERR(omap->ehci_logic_fck))
clk_enable(omap->ehci_logic_fck);
@@ -353,7 +400,7 @@ static int usbhs_runtime_suspend(struct device *dev)
if (!IS_ERR(omap->ehci_logic_fck))
clk_disable(omap->ehci_logic_fck);
- omap_tll_disable();
+ omap_tll_disable(pdata);
return 0;
}
@@ -430,24 +477,10 @@ static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
static void omap_usbhs_init(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
- struct usbhs_omap_platform_data *pdata = omap->pdata;
unsigned reg;
dev_dbg(dev, "starting TI HSUSB Controller\n");
- if (pdata->phy_reset) {
- if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_request_one(pdata->reset_gpio_port[0],
- GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
-
- if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_request_one(pdata->reset_gpio_port[1],
- GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
-
- /* Hold the PHY in RESET for enough time till DIR is high */
- udelay(10);
- }
-
pm_runtime_get_sync(dev);
reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
@@ -476,36 +509,59 @@ static void omap_usbhs_init(struct device *dev)
dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
pm_runtime_put_sync(dev);
- if (pdata->phy_reset) {
- /* Hold the PHY in RESET for enough time till
- * PHY is settled and ready
- */
- udelay(10);
+}
+
+static int usbhs_omap_get_dt_pdata(struct device *dev,
+ struct usbhs_omap_platform_data *pdata)
+{
+ int ret, i;
+ struct device_node *node = dev->of_node;
- if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_set_value_cansleep
- (pdata->reset_gpio_port[0], 1);
+ ret = of_property_read_u32(node, "num-ports", &pdata->nports);
+ if (ret)
+ pdata->nports = 0;
- if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_set_value_cansleep
- (pdata->reset_gpio_port[1], 1);
+ if (pdata->nports > OMAP3_HS_USB_PORTS) {
+ dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n",
+ pdata->nports, OMAP3_HS_USB_PORTS);
+ return -ENODEV;
}
-}
-static void omap_usbhs_deinit(struct device *dev)
-{
- struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
- struct usbhs_omap_platform_data *pdata = omap->pdata;
+ /* get port modes */
+ for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
+ char prop[11];
+ const char *mode;
- if (pdata->phy_reset) {
- if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_free(pdata->reset_gpio_port[0]);
+ pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED;
+
+ snprintf(prop, sizeof(prop), "port%d-mode", i + 1);
+ ret = of_property_read_string(node, prop, &mode);
+ if (ret < 0)
+ continue;
+
+ ret = omap_usbhs_get_dt_port_mode(mode);
+ if (ret < 0) {
+ dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n",
+ i, mode);
+ return -ENODEV;
+ }
- if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_free(pdata->reset_gpio_port[1]);
+ dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret);
+ pdata->port_mode[i] = ret;
}
+
+ /* get flags */
+ pdata->single_ulpi_bypass = of_property_read_bool(node,
+ "single-ulpi-bypass");
+
+ return 0;
}
+static struct of_device_id usbhs_child_match_table[] = {
+ { .compatible = "ti,omap-ehci", },
+ { .compatible = "ti,omap-ohci", },
+ { }
+};
/**
* usbhs_omap_probe - initialize TI-based HCDs
@@ -522,26 +578,46 @@ static int usbhs_omap_probe(struct platform_device *pdev)
int i;
bool need_logic_fck;
+ if (dev->of_node) {
+ /* For DT boot we populate platform data from OF node */
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ ret = usbhs_omap_get_dt_pdata(dev, pdata);
+ if (ret)
+ return ret;
+
+ dev->platform_data = pdata;
+ }
+
if (!pdata) {
dev_err(dev, "Missing platform data\n");
return -ENODEV;
}
+ if (pdata->nports > OMAP3_HS_USB_PORTS) {
+ dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n",
+ pdata->nports, OMAP3_HS_USB_PORTS);
+ return -ENODEV;
+ }
+
omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
if (!omap) {
dev_err(dev, "Memory allocation failed\n");
return -ENOMEM;
}
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
- omap->uhh_base = devm_request_and_ioremap(dev, res);
- if (!omap->uhh_base) {
- dev_err(dev, "Resource request/ioremap failed\n");
- return -EADDRNOTAVAIL;
- }
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ omap->uhh_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(omap->uhh_base))
+ return PTR_ERR(omap->uhh_base);
omap->pdata = pdata;
+ /* Initialize the TLL subsystem */
+ omap_tll_init(pdata);
+
pm_runtime_enable(dev);
platform_set_drvdata(pdev, omap);
@@ -575,6 +651,7 @@ static int usbhs_omap_probe(struct platform_device *pdev)
omap->usbhs_rev, omap->nports);
break;
}
+ pdata->nports = omap->nports;
}
i = sizeof(struct clk *) * omap->nports;
@@ -700,17 +777,28 @@ static int usbhs_omap_probe(struct platform_device *pdev)
}
omap_usbhs_init(dev);
- ret = omap_usbhs_alloc_children(pdev);
- if (ret) {
- dev_err(dev, "omap_usbhs_alloc_children failed\n");
- goto err_alloc;
+
+ if (dev->of_node) {
+ ret = of_platform_populate(dev->of_node,
+ usbhs_child_match_table, NULL, dev);
+
+ if (ret) {
+ dev_err(dev, "Failed to create DT children: %d\n", ret);
+ goto err_alloc;
+ }
+
+ } else {
+ ret = omap_usbhs_alloc_children(pdev);
+ if (ret) {
+ dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
+ ret);
+ goto err_alloc;
+ }
}
return 0;
err_alloc:
- omap_usbhs_deinit(&pdev->dev);
-
for (i = 0; i < omap->nports; i++) {
if (!IS_ERR(omap->utmi_clk[i]))
clk_put(omap->utmi_clk[i]);
@@ -744,6 +832,13 @@ err_mem:
return ret;
}
+static int usbhs_omap_remove_child(struct device *dev, void *data)
+{
+ dev_info(dev, "unregistering\n");
+ platform_device_unregister(to_platform_device(dev));
+ return 0;
+}
+
/**
* usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
* @pdev: USB Host Controller being removed
@@ -755,8 +850,6 @@ static int usbhs_omap_remove(struct platform_device *pdev)
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
int i;
- omap_usbhs_deinit(&pdev->dev);
-
for (i = 0; i < omap->nports; i++) {
if (!IS_ERR(omap->utmi_clk[i]))
clk_put(omap->utmi_clk[i]);
@@ -777,6 +870,8 @@ static int usbhs_omap_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
+ /* remove children */
+ device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child);
return 0;
}
@@ -785,16 +880,26 @@ static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
.runtime_resume = usbhs_runtime_resume,
};
+static const struct of_device_id usbhs_omap_dt_ids[] = {
+ { .compatible = "ti,usbhs-host" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids);
+
+
static struct platform_driver usbhs_omap_driver = {
.driver = {
.name = (char *)usbhs_driver_name,
.owner = THIS_MODULE,
.pm = &usbhsomap_dev_pm_ops,
+ .of_match_table = of_match_ptr(usbhs_omap_dt_ids),
},
.remove = usbhs_omap_remove,
};
MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 0aef1a76888..e59ac4cbac9 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -1,8 +1,9 @@
/**
* omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI
*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2012-2013 Texas Instruments Incorporated - http://www.ti.com
* Author: Keshava Munegowda <keshava_mgowda@ti.com>
+ * Author: Roger Quadros <rogerq@ti.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 of
@@ -27,6 +28,7 @@
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <linux/platform_data/usb-omap.h>
+#include <linux/of.h>
#define USBTLL_DRIVER_NAME "usbhs_tll"
@@ -105,8 +107,8 @@
struct usbtll_omap {
int nch; /* num. of channels */
- struct usbhs_omap_platform_data *pdata;
struct clk **ch_clk;
+ void __iomem *base;
};
/*-------------------------------------------------------------------------*/
@@ -210,14 +212,10 @@ static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
static int usbtll_omap_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct usbhs_omap_platform_data *pdata = dev->platform_data;
- void __iomem *base;
struct resource *res;
struct usbtll_omap *tll;
- unsigned reg;
int ret = 0;
int i, ver;
- bool needs_tll;
dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
@@ -227,26 +225,16 @@ static int usbtll_omap_probe(struct platform_device *pdev)
return -ENOMEM;
}
- if (!pdata) {
- dev_err(dev, "Platform data missing\n");
- return -ENODEV;
- }
-
- tll->pdata = pdata;
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_request_and_ioremap(dev, res);
- if (!base) {
- ret = -EADDRNOTAVAIL;
- dev_err(dev, "Resource request/ioremap failed:%d\n", ret);
- return ret;
- }
+ tll->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(tll->base))
+ return PTR_ERR(tll->base);
platform_set_drvdata(pdev, tll);
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
- ver = usbtll_read(base, OMAP_USBTLL_REVISION);
+ ver = usbtll_read(tll->base, OMAP_USBTLL_REVISION);
switch (ver) {
case OMAP_USBTLL_REV1:
case OMAP_USBTLL_REV4:
@@ -283,11 +271,85 @@ static int usbtll_omap_probe(struct platform_device *pdev)
dev_dbg(dev, "can't get clock : %s\n", clkname);
}
+ pm_runtime_put_sync(dev);
+ /* only after this can omap_tll_enable/disable work */
+ spin_lock(&tll_lock);
+ tll_dev = dev;
+ spin_unlock(&tll_lock);
+
+ return 0;
+
+err_clk_alloc:
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+
+ return ret;
+}
+
+/**
+ * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Reverses the effect of usbtll_omap_probe().
+ */
+static int usbtll_omap_remove(struct platform_device *pdev)
+{
+ struct usbtll_omap *tll = platform_get_drvdata(pdev);
+ int i;
+
+ spin_lock(&tll_lock);
+ tll_dev = NULL;
+ spin_unlock(&tll_lock);
+
+ for (i = 0; i < tll->nch; i++)
+ if (!IS_ERR(tll->ch_clk[i]))
+ clk_put(tll->ch_clk[i]);
+
+ pm_runtime_disable(&pdev->dev);
+ return 0;
+}
+
+static const struct of_device_id usbtll_omap_dt_ids[] = {
+ { .compatible = "ti,usbhs-tll" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, usbtll_omap_dt_ids);
+
+static struct platform_driver usbtll_omap_driver = {
+ .driver = {
+ .name = (char *)usbtll_driver_name,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(usbtll_omap_dt_ids),
+ },
+ .probe = usbtll_omap_probe,
+ .remove = usbtll_omap_remove,
+};
+
+int omap_tll_init(struct usbhs_omap_platform_data *pdata)
+{
+ int i;
+ bool needs_tll;
+ unsigned reg;
+ struct usbtll_omap *tll;
+
+ spin_lock(&tll_lock);
+
+ if (!tll_dev) {
+ spin_unlock(&tll_lock);
+ return -ENODEV;
+ }
+
+ tll = dev_get_drvdata(tll_dev);
+
needs_tll = false;
for (i = 0; i < tll->nch; i++)
needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]);
+ pm_runtime_get_sync(tll_dev);
+
if (needs_tll) {
+ void __iomem *base = tll->base;
/* Program Common TLL register */
reg = usbtll_read(base, OMAP_TLL_SHARED_CONF);
@@ -336,51 +398,29 @@ static int usbtll_omap_probe(struct platform_device *pdev)
}
}
- pm_runtime_put_sync(dev);
- /* only after this can omap_tll_enable/disable work */
- spin_lock(&tll_lock);
- tll_dev = dev;
+ pm_runtime_put_sync(tll_dev);
+
spin_unlock(&tll_lock);
return 0;
-
-err_clk_alloc:
- pm_runtime_put_sync(dev);
- pm_runtime_disable(dev);
-
- return ret;
}
+EXPORT_SYMBOL_GPL(omap_tll_init);
-/**
- * usbtll_omap_remove - shutdown processing for UHH & TLL HCDs
- * @pdev: USB Host Controller being removed
- *
- * Reverses the effect of usbtll_omap_probe().
- */
-static int usbtll_omap_remove(struct platform_device *pdev)
+int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
{
- struct usbtll_omap *tll = platform_get_drvdata(pdev);
int i;
+ struct usbtll_omap *tll;
spin_lock(&tll_lock);
- tll_dev = NULL;
- spin_unlock(&tll_lock);
- for (i = 0; i < tll->nch; i++)
- if (!IS_ERR(tll->ch_clk[i]))
- clk_put(tll->ch_clk[i]);
-
- pm_runtime_disable(&pdev->dev);
- return 0;
-}
+ if (!tll_dev) {
+ spin_unlock(&tll_lock);
+ return -ENODEV;
+ }
-static int usbtll_runtime_resume(struct device *dev)
-{
- struct usbtll_omap *tll = dev_get_drvdata(dev);
- struct usbhs_omap_platform_data *pdata = tll->pdata;
- int i;
+ tll = dev_get_drvdata(tll_dev);
- dev_dbg(dev, "usbtll_runtime_resume\n");
+ pm_runtime_get_sync(tll_dev);
for (i = 0; i < tll->nch; i++) {
if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
@@ -391,22 +431,31 @@ static int usbtll_runtime_resume(struct device *dev)
r = clk_enable(tll->ch_clk[i]);
if (r) {
- dev_err(dev,
+ dev_err(tll_dev,
"Error enabling ch %d clock: %d\n", i, r);
}
}
}
+ spin_unlock(&tll_lock);
+
return 0;
}
+EXPORT_SYMBOL_GPL(omap_tll_enable);
-static int usbtll_runtime_suspend(struct device *dev)
+int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
{
- struct usbtll_omap *tll = dev_get_drvdata(dev);
- struct usbhs_omap_platform_data *pdata = tll->pdata;
int i;
+ struct usbtll_omap *tll;
- dev_dbg(dev, "usbtll_runtime_suspend\n");
+ spin_lock(&tll_lock);
+
+ if (!tll_dev) {
+ spin_unlock(&tll_lock);
+ return -ENODEV;
+ }
+
+ tll = dev_get_drvdata(tll_dev);
for (i = 0; i < tll->nch; i++) {
if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
@@ -415,64 +464,16 @@ static int usbtll_runtime_suspend(struct device *dev)
}
}
- return 0;
-}
-
-static const struct dev_pm_ops usbtllomap_dev_pm_ops = {
- SET_RUNTIME_PM_OPS(usbtll_runtime_suspend,
- usbtll_runtime_resume,
- NULL)
-};
-
-static struct platform_driver usbtll_omap_driver = {
- .driver = {
- .name = (char *)usbtll_driver_name,
- .owner = THIS_MODULE,
- .pm = &usbtllomap_dev_pm_ops,
- },
- .probe = usbtll_omap_probe,
- .remove = usbtll_omap_remove,
-};
-
-int omap_tll_enable(void)
-{
- int ret;
-
- spin_lock(&tll_lock);
-
- if (!tll_dev) {
- pr_err("%s: OMAP USB TLL not initialized\n", __func__);
- ret = -ENODEV;
- } else {
- ret = pm_runtime_get_sync(tll_dev);
- }
-
- spin_unlock(&tll_lock);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(omap_tll_enable);
-
-int omap_tll_disable(void)
-{
- int ret;
-
- spin_lock(&tll_lock);
-
- if (!tll_dev) {
- pr_err("%s: OMAP USB TLL not initialized\n", __func__);
- ret = -ENODEV;
- } else {
- ret = pm_runtime_put_sync(tll_dev);
- }
+ pm_runtime_put_sync(tll_dev);
spin_unlock(&tll_lock);
- return ret;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_tll_disable);
MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
+MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("usb tll driver for TI OMAP EHCI and OHCI controllers");
diff --git a/drivers/mfd/omap-usb.h b/drivers/mfd/omap-usb.h
index 972aa961b06..2a508b6aeac 100644
--- a/drivers/mfd/omap-usb.h
+++ b/drivers/mfd/omap-usb.h
@@ -1,2 +1,3 @@
-extern int omap_tll_enable(void);
-extern int omap_tll_disable(void);
+extern int omap_tll_init(struct usbhs_omap_platform_data *pdata);
+extern int omap_tll_enable(struct usbhs_omap_platform_data *pdata);
+extern int omap_tll_disable(struct usbhs_omap_platform_data *pdata);
diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index 73bf76df104..53e9fe638d3 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -278,20 +278,20 @@ static void palmas_dt_to_pdata(struct i2c_client *i2c,
int ret;
u32 prop;
- ret = of_property_read_u32(node, "ti,mux_pad1", &prop);
+ ret = of_property_read_u32(node, "ti,mux-pad1", &prop);
if (!ret) {
pdata->mux_from_pdata = 1;
pdata->pad1 = prop;
}
- ret = of_property_read_u32(node, "ti,mux_pad2", &prop);
+ ret = of_property_read_u32(node, "ti,mux-pad2", &prop);
if (!ret) {
pdata->mux_from_pdata = 1;
pdata->pad2 = prop;
}
/* The default for this register is all masked */
- ret = of_property_read_u32(node, "ti,power_ctrl", &prop);
+ ret = of_property_read_u32(node, "ti,power-ctrl", &prop);
if (!ret)
pdata->power_ctrl = prop;
else
@@ -349,6 +349,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
ret = -ENOMEM;
goto err;
}
+ palmas->i2c_clients[i]->dev.of_node = of_node_get(node);
}
palmas->regmap[i] = devm_regmap_init_i2c(palmas->i2c_clients[i],
&palmas_regmap_config[i]);
diff --git a/drivers/mfd/retu-mfd.c b/drivers/mfd/retu-mfd.c
index 3ba048655bf..a1830986eeb 100644
--- a/drivers/mfd/retu-mfd.c
+++ b/drivers/mfd/retu-mfd.c
@@ -1,5 +1,5 @@
/*
- * Retu MFD driver
+ * Retu/Tahvo MFD driver
*
* Copyright (C) 2004, 2005 Nokia Corporation
*
@@ -33,7 +33,8 @@
#define RETU_REG_ASICR 0x00 /* ASIC ID and revision */
#define RETU_REG_ASICR_VILMA (1 << 7) /* Bit indicating Vilma */
#define RETU_REG_IDR 0x01 /* Interrupt ID */
-#define RETU_REG_IMR 0x02 /* Interrupt mask */
+#define RETU_REG_IMR 0x02 /* Interrupt mask (Retu) */
+#define TAHVO_REG_IMR 0x03 /* Interrupt mask (Tahvo) */
/* Interrupt sources */
#define RETU_INT_PWR 0 /* Power button */
@@ -84,6 +85,62 @@ static struct regmap_irq_chip retu_irq_chip = {
/* Retu device registered for the power off. */
static struct retu_dev *retu_pm_power_off;
+static struct resource tahvo_usb_res[] = {
+ {
+ .name = "tahvo-usb",
+ .start = TAHVO_INT_VBUS,
+ .end = TAHVO_INT_VBUS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell tahvo_devs[] = {
+ {
+ .name = "tahvo-usb",
+ .resources = tahvo_usb_res,
+ .num_resources = ARRAY_SIZE(tahvo_usb_res),
+ },
+};
+
+static struct regmap_irq tahvo_irqs[] = {
+ [TAHVO_INT_VBUS] = {
+ .mask = 1 << TAHVO_INT_VBUS,
+ }
+};
+
+static struct regmap_irq_chip tahvo_irq_chip = {
+ .name = "TAHVO",
+ .irqs = tahvo_irqs,
+ .num_irqs = ARRAY_SIZE(tahvo_irqs),
+ .num_regs = 1,
+ .status_base = RETU_REG_IDR,
+ .mask_base = TAHVO_REG_IMR,
+ .ack_base = RETU_REG_IDR,
+};
+
+static const struct retu_data {
+ char *chip_name;
+ char *companion_name;
+ struct regmap_irq_chip *irq_chip;
+ struct mfd_cell *children;
+ int nchildren;
+} retu_data[] = {
+ [0] = {
+ .chip_name = "Retu",
+ .companion_name = "Vilma",
+ .irq_chip = &retu_irq_chip,
+ .children = retu_devs,
+ .nchildren = ARRAY_SIZE(retu_devs),
+ },
+ [1] = {
+ .chip_name = "Tahvo",
+ .companion_name = "Betty",
+ .irq_chip = &tahvo_irq_chip,
+ .children = tahvo_devs,
+ .nchildren = ARRAY_SIZE(tahvo_devs),
+ }
+};
+
int retu_read(struct retu_dev *rdev, u8 reg)
{
int ret;
@@ -173,9 +230,14 @@ static struct regmap_config retu_config = {
static int retu_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
+ struct retu_data const *rdat;
struct retu_dev *rdev;
int ret;
+ if (i2c->addr > ARRAY_SIZE(retu_data))
+ return -ENODEV;
+ rdat = &retu_data[i2c->addr - 1];
+
rdev = devm_kzalloc(&i2c->dev, sizeof(*rdev), GFP_KERNEL);
if (rdev == NULL)
return -ENOMEM;
@@ -190,25 +252,27 @@ static int retu_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
ret = retu_read(rdev, RETU_REG_ASICR);
if (ret < 0) {
- dev_err(rdev->dev, "could not read Retu revision: %d\n", ret);
+ dev_err(rdev->dev, "could not read %s revision: %d\n",
+ rdat->chip_name, ret);
return ret;
}
- dev_info(rdev->dev, "Retu%s v%d.%d found\n",
- (ret & RETU_REG_ASICR_VILMA) ? " & Vilma" : "",
+ dev_info(rdev->dev, "%s%s%s v%d.%d found\n", rdat->chip_name,
+ (ret & RETU_REG_ASICR_VILMA) ? " & " : "",
+ (ret & RETU_REG_ASICR_VILMA) ? rdat->companion_name : "",
(ret >> 4) & 0x7, ret & 0xf);
- /* Mask all RETU interrupts. */
- ret = retu_write(rdev, RETU_REG_IMR, 0xffff);
+ /* Mask all interrupts. */
+ ret = retu_write(rdev, rdat->irq_chip->mask_base, 0xffff);
if (ret < 0)
return ret;
ret = regmap_add_irq_chip(rdev->regmap, i2c->irq, IRQF_ONESHOT, -1,
- &retu_irq_chip, &rdev->irq_data);
+ rdat->irq_chip, &rdev->irq_data);
if (ret < 0)
return ret;
- ret = mfd_add_devices(rdev->dev, -1, retu_devs, ARRAY_SIZE(retu_devs),
+ ret = mfd_add_devices(rdev->dev, -1, rdat->children, rdat->nchildren,
NULL, regmap_irq_chip_get_base(rdev->irq_data),
NULL);
if (ret < 0) {
@@ -216,7 +280,7 @@ static int retu_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
return ret;
}
- if (!pm_power_off) {
+ if (i2c->addr == 1 && !pm_power_off) {
retu_pm_power_off = rdev;
pm_power_off = retu_power_off;
}
@@ -240,6 +304,7 @@ static int retu_remove(struct i2c_client *i2c)
static const struct i2c_device_id retu_id[] = {
{ "retu-mfd", 0 },
+ { "tahvo-mfd", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, retu_id);
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
new file mode 100644
index 00000000000..15dc848bc08
--- /dev/null
+++ b/drivers/mfd/rts5249.c
@@ -0,0 +1,241 @@
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Wei WANG <wei_wang@realsil.com.cn>
+ * No. 128, West Shenhu Road, Suzhou Industry Park, Suzhou, China
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mfd/rtsx_pci.h>
+
+#include "rtsx_pcr.h"
+
+static u8 rts5249_get_ic_version(struct rtsx_pcr *pcr)
+{
+ u8 val;
+
+ rtsx_pci_read_register(pcr, DUMMY_REG_RESET_0, &val);
+ return val & 0x0F;
+}
+
+static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
+{
+ rtsx_pci_init_cmd(pcr);
+
+ /* Configure GPIO as output */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02);
+ /* Switch LDO3318 source from DV33 to card_3v3 */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01);
+ /* LED shine disabled, set initial shine cycle period */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02);
+ /* Correct driving */
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ SD30_CLK_DRIVE_SEL, 0xFF, 0x99);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ SD30_CMD_DRIVE_SEL, 0xFF, 0x99);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ SD30_DAT_DRIVE_SEL, 0xFF, 0x92);
+
+ return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
+{
+ int err;
+
+ err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV, 0xFE46);
+ if (err < 0)
+ return err;
+
+ msleep(1);
+
+ return rtsx_pci_write_phy_register(pcr, PHY_BPCR, 0x05C0);
+}
+
+static int rts5249_turn_on_led(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02);
+}
+
+static int rts5249_turn_off_led(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
+}
+
+static int rts5249_enable_auto_blink(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08);
+}
+
+static int rts5249_disable_auto_blink(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00);
+}
+
+static int rts5249_card_power_on(struct rtsx_pcr *pcr, int card)
+{
+ int err;
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+ SD_POWER_MASK, SD_VCC_PARTIAL_POWER_ON);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+ LDO3318_PWR_MASK, 0x02);
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ msleep(5);
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+ SD_POWER_MASK, SD_VCC_POWER_ON);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+ LDO3318_PWR_MASK, 0x06);
+ err = rtsx_pci_send_cmd(pcr, 100);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int rts5249_card_power_off(struct rtsx_pcr *pcr, int card)
+{
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL,
+ SD_POWER_MASK, SD_POWER_OFF);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL,
+ LDO3318_PWR_MASK, 0x00);
+ return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static int rts5249_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+ int err;
+ u8 clk_drive, cmd_drive, dat_drive;
+
+ if (voltage == OUTPUT_3V3) {
+ err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, 0x4FC0 | 0x24);
+ if (err < 0)
+ return err;
+ clk_drive = 0x99;
+ cmd_drive = 0x99;
+ dat_drive = 0x92;
+ } else if (voltage == OUTPUT_1V8) {
+ err = rtsx_pci_write_phy_register(pcr, PHY_BACR, 0x3C02);
+ if (err < 0)
+ return err;
+ err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, 0x4C40 | 0x24);
+ if (err < 0)
+ return err;
+ clk_drive = 0xb3;
+ cmd_drive = 0xb3;
+ dat_drive = 0xb3;
+ } else {
+ return -EINVAL;
+ }
+
+ /* set pad drive */
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CLK_DRIVE_SEL,
+ 0xFF, clk_drive);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_CMD_DRIVE_SEL,
+ 0xFF, cmd_drive);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD30_DAT_DRIVE_SEL,
+ 0xFF, dat_drive);
+ return rtsx_pci_send_cmd(pcr, 100);
+}
+
+static const struct pcr_ops rts5249_pcr_ops = {
+ .extra_init_hw = rts5249_extra_init_hw,
+ .optimize_phy = rts5249_optimize_phy,
+ .turn_on_led = rts5249_turn_on_led,
+ .turn_off_led = rts5249_turn_off_led,
+ .enable_auto_blink = rts5249_enable_auto_blink,
+ .disable_auto_blink = rts5249_disable_auto_blink,
+ .card_power_on = rts5249_card_power_on,
+ .card_power_off = rts5249_card_power_off,
+ .switch_output_voltage = rts5249_switch_output_voltage,
+};
+
+/* SD Pull Control Enable:
+ * SD_DAT[3:0] ==> pull up
+ * SD_CD ==> pull up
+ * SD_WP ==> pull up
+ * SD_CMD ==> pull up
+ * SD_CLK ==> pull down
+ */
+static const u32 rts5249_sd_pull_ctl_enable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL1, 0x66),
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
+ RTSX_REG_PAIR(CARD_PULL_CTL4, 0xAA),
+ 0,
+};
+
+/* SD Pull Control Disable:
+ * SD_DAT[3:0] ==> pull down
+ * SD_CD ==> pull up
+ * SD_WP ==> pull down
+ * SD_CMD ==> pull down
+ * SD_CLK ==> pull down
+ */
+static const u32 rts5249_sd_pull_ctl_disable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL1, 0x66),
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
+ RTSX_REG_PAIR(CARD_PULL_CTL4, 0x55),
+ 0,
+};
+
+/* MS Pull Control Enable:
+ * MS CD ==> pull up
+ * others ==> pull down
+ */
+static const u32 rts5249_ms_pull_ctl_enable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL4, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+ 0,
+};
+
+/* MS Pull Control Disable:
+ * MS CD ==> pull up
+ * others ==> pull down
+ */
+static const u32 rts5249_ms_pull_ctl_disable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL4, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15),
+ 0,
+};
+
+void rts5249_init_params(struct rtsx_pcr *pcr)
+{
+ pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
+ pcr->num_slots = 2;
+ pcr->ops = &rts5249_pcr_ops;
+
+ pcr->ic_version = rts5249_get_ic_version(pcr);
+ pcr->sd_pull_ctl_enable_tbl = rts5249_sd_pull_ctl_enable_tbl;
+ pcr->sd_pull_ctl_disable_tbl = rts5249_sd_pull_ctl_disable_tbl;
+ pcr->ms_pull_ctl_enable_tbl = rts5249_ms_pull_ctl_enable_tbl;
+ pcr->ms_pull_ctl_disable_tbl = rts5249_ms_pull_ctl_disable_tbl;
+}
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 2f12cc13489..e968c01ca2a 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -56,6 +56,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtsx_pci_ids) = {
{ PCI_DEVICE(0x10EC, 0x5229), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5289), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5227), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+ { PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ 0, }
};
@@ -1033,6 +1034,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
case 0x5227:
rts5227_init_params(pcr);
break;
+
+ case 0x5249:
+ rts5249_init_params(pcr);
+ break;
}
dev_dbg(&(pcr->pci->dev), "PID: 0x%04x, IC version: 0x%02x\n",
@@ -1138,7 +1143,7 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
ret = rtsx_pci_acquire_irq(pcr);
if (ret < 0)
- goto free_dma;
+ goto disable_msi;
pci_set_master(pcidev);
synchronize_irq(pcr->irq);
@@ -1162,7 +1167,9 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
disable_irq:
free_irq(pcr->irq, (void *)pcr);
-free_dma:
+disable_msi:
+ if (pcr->msi_en)
+ pci_disable_msi(pcr->pci);
dma_free_coherent(&(pcr->pci->dev), RTSX_RESV_BUF_LEN,
pcr->rtsx_resv_buf, pcr->rtsx_resv_buf_addr);
unmap:
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
index 2b3ab8a0482..55fcfc25c4e 100644
--- a/drivers/mfd/rtsx_pcr.h
+++ b/drivers/mfd/rtsx_pcr.h
@@ -32,5 +32,6 @@ void rts5209_init_params(struct rtsx_pcr *pcr);
void rts5229_init_params(struct rtsx_pcr *pcr);
void rtl8411_init_params(struct rtsx_pcr *pcr);
void rts5227_init_params(struct rtsx_pcr *pcr);
+void rts5249_init_params(struct rtsx_pcr *pcr);
#endif
diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c
new file mode 100644
index 00000000000..de48b4e8845
--- /dev/null
+++ b/drivers/mfd/si476x-cmd.c
@@ -0,0 +1,1553 @@
+/*
+ * drivers/mfd/si476x-cmd.c -- Subroutines implementing command
+ * protocol of si476x series of chips
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/atomic.h>
+#include <linux/i2c.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/videodev2.h>
+
+#include <linux/mfd/si476x-core.h>
+
+#define msb(x) ((u8)((u16) x >> 8))
+#define lsb(x) ((u8)((u16) x & 0x00FF))
+
+
+
+#define CMD_POWER_UP 0x01
+#define CMD_POWER_UP_A10_NRESP 1
+#define CMD_POWER_UP_A10_NARGS 5
+
+#define CMD_POWER_UP_A20_NRESP 1
+#define CMD_POWER_UP_A20_NARGS 5
+
+#define POWER_UP_DELAY_MS 110
+
+#define CMD_POWER_DOWN 0x11
+#define CMD_POWER_DOWN_A10_NRESP 1
+
+#define CMD_POWER_DOWN_A20_NRESP 1
+#define CMD_POWER_DOWN_A20_NARGS 1
+
+#define CMD_FUNC_INFO 0x12
+#define CMD_FUNC_INFO_NRESP 7
+
+#define CMD_SET_PROPERTY 0x13
+#define CMD_SET_PROPERTY_NARGS 5
+#define CMD_SET_PROPERTY_NRESP 1
+
+#define CMD_GET_PROPERTY 0x14
+#define CMD_GET_PROPERTY_NARGS 3
+#define CMD_GET_PROPERTY_NRESP 4
+
+#define CMD_AGC_STATUS 0x17
+#define CMD_AGC_STATUS_NRESP_A10 2
+#define CMD_AGC_STATUS_NRESP_A20 6
+
+#define PIN_CFG_BYTE(x) (0x7F & (x))
+#define CMD_DIG_AUDIO_PIN_CFG 0x18
+#define CMD_DIG_AUDIO_PIN_CFG_NARGS 4
+#define CMD_DIG_AUDIO_PIN_CFG_NRESP 5
+
+#define CMD_ZIF_PIN_CFG 0x19
+#define CMD_ZIF_PIN_CFG_NARGS 4
+#define CMD_ZIF_PIN_CFG_NRESP 5
+
+#define CMD_IC_LINK_GPO_CTL_PIN_CFG 0x1A
+#define CMD_IC_LINK_GPO_CTL_PIN_CFG_NARGS 4
+#define CMD_IC_LINK_GPO_CTL_PIN_CFG_NRESP 5
+
+#define CMD_ANA_AUDIO_PIN_CFG 0x1B
+#define CMD_ANA_AUDIO_PIN_CFG_NARGS 1
+#define CMD_ANA_AUDIO_PIN_CFG_NRESP 2
+
+#define CMD_INTB_PIN_CFG 0x1C
+#define CMD_INTB_PIN_CFG_NARGS 2
+#define CMD_INTB_PIN_CFG_A10_NRESP 6
+#define CMD_INTB_PIN_CFG_A20_NRESP 3
+
+#define CMD_FM_TUNE_FREQ 0x30
+#define CMD_FM_TUNE_FREQ_A10_NARGS 5
+#define CMD_FM_TUNE_FREQ_A20_NARGS 3
+#define CMD_FM_TUNE_FREQ_NRESP 1
+
+#define CMD_FM_RSQ_STATUS 0x32
+
+#define CMD_FM_RSQ_STATUS_A10_NARGS 1
+#define CMD_FM_RSQ_STATUS_A10_NRESP 17
+#define CMD_FM_RSQ_STATUS_A30_NARGS 1
+#define CMD_FM_RSQ_STATUS_A30_NRESP 23
+
+
+#define CMD_FM_SEEK_START 0x31
+#define CMD_FM_SEEK_START_NARGS 1
+#define CMD_FM_SEEK_START_NRESP 1
+
+#define CMD_FM_RDS_STATUS 0x36
+#define CMD_FM_RDS_STATUS_NARGS 1
+#define CMD_FM_RDS_STATUS_NRESP 16
+
+#define CMD_FM_RDS_BLOCKCOUNT 0x37
+#define CMD_FM_RDS_BLOCKCOUNT_NARGS 1
+#define CMD_FM_RDS_BLOCKCOUNT_NRESP 8
+
+#define CMD_FM_PHASE_DIVERSITY 0x38
+#define CMD_FM_PHASE_DIVERSITY_NARGS 1
+#define CMD_FM_PHASE_DIVERSITY_NRESP 1
+
+#define CMD_FM_PHASE_DIV_STATUS 0x39
+#define CMD_FM_PHASE_DIV_STATUS_NRESP 2
+
+#define CMD_AM_TUNE_FREQ 0x40
+#define CMD_AM_TUNE_FREQ_NARGS 3
+#define CMD_AM_TUNE_FREQ_NRESP 1
+
+#define CMD_AM_RSQ_STATUS 0x42
+#define CMD_AM_RSQ_STATUS_NARGS 1
+#define CMD_AM_RSQ_STATUS_NRESP 13
+
+#define CMD_AM_SEEK_START 0x41
+#define CMD_AM_SEEK_START_NARGS 1
+#define CMD_AM_SEEK_START_NRESP 1
+
+
+#define CMD_AM_ACF_STATUS 0x45
+#define CMD_AM_ACF_STATUS_NRESP 6
+#define CMD_AM_ACF_STATUS_NARGS 1
+
+#define CMD_FM_ACF_STATUS 0x35
+#define CMD_FM_ACF_STATUS_NRESP 8
+#define CMD_FM_ACF_STATUS_NARGS 1
+
+#define CMD_MAX_ARGS_COUNT (10)
+
+
+enum si476x_acf_status_report_bits {
+ SI476X_ACF_BLEND_INT = (1 << 4),
+ SI476X_ACF_HIBLEND_INT = (1 << 3),
+ SI476X_ACF_HICUT_INT = (1 << 2),
+ SI476X_ACF_CHBW_INT = (1 << 1),
+ SI476X_ACF_SOFTMUTE_INT = (1 << 0),
+
+ SI476X_ACF_SMUTE = (1 << 0),
+ SI476X_ACF_SMATTN = 0b11111,
+ SI476X_ACF_PILOT = (1 << 7),
+ SI476X_ACF_STBLEND = ~SI476X_ACF_PILOT,
+};
+
+enum si476x_agc_status_report_bits {
+ SI476X_AGC_MXHI = (1 << 5),
+ SI476X_AGC_MXLO = (1 << 4),
+ SI476X_AGC_LNAHI = (1 << 3),
+ SI476X_AGC_LNALO = (1 << 2),
+};
+
+enum si476x_errors {
+ SI476X_ERR_BAD_COMMAND = 0x10,
+ SI476X_ERR_BAD_ARG1 = 0x11,
+ SI476X_ERR_BAD_ARG2 = 0x12,
+ SI476X_ERR_BAD_ARG3 = 0x13,
+ SI476X_ERR_BAD_ARG4 = 0x14,
+ SI476X_ERR_BUSY = 0x18,
+ SI476X_ERR_BAD_INTERNAL_MEMORY = 0x20,
+ SI476X_ERR_BAD_PATCH = 0x30,
+ SI476X_ERR_BAD_BOOT_MODE = 0x31,
+ SI476X_ERR_BAD_PROPERTY = 0x40,
+};
+
+static int si476x_core_parse_and_nag_about_error(struct si476x_core *core)
+{
+ int err;
+ char *cause;
+ u8 buffer[2];
+
+ if (core->revision != SI476X_REVISION_A10) {
+ err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV,
+ buffer, sizeof(buffer));
+ if (err == sizeof(buffer)) {
+ switch (buffer[1]) {
+ case SI476X_ERR_BAD_COMMAND:
+ cause = "Bad command";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_ARG1:
+ cause = "Bad argument #1";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_ARG2:
+ cause = "Bad argument #2";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_ARG3:
+ cause = "Bad argument #3";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_ARG4:
+ cause = "Bad argument #4";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BUSY:
+ cause = "Chip is busy";
+ err = -EBUSY;
+ break;
+ case SI476X_ERR_BAD_INTERNAL_MEMORY:
+ cause = "Bad internal memory";
+ err = -EIO;
+ break;
+ case SI476X_ERR_BAD_PATCH:
+ cause = "Bad patch";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_BOOT_MODE:
+ cause = "Bad boot mode";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_PROPERTY:
+ cause = "Bad property";
+ err = -EINVAL;
+ break;
+ default:
+ cause = "Unknown";
+ err = -EIO;
+ }
+
+ dev_err(&core->client->dev,
+ "[Chip error status]: %s\n", cause);
+ } else {
+ dev_err(&core->client->dev,
+ "Failed to fetch error code\n");
+ err = (err >= 0) ? -EIO : err;
+ }
+ } else {
+ err = -EIO;
+ }
+
+ return err;
+}
+
+/**
+ * si476x_core_send_command() - sends a command to si476x and waits its
+ * response
+ * @core: si476x_device structure for the device we are
+ * communicating with
+ * @command: command id
+ * @args: command arguments we are sending
+ * @argn: actual size of @args
+ * @response: buffer to place the expected response from the device
+ * @respn: actual size of @response
+ * @usecs: amount of time to wait before reading the response (in
+ * usecs)
+ *
+ * Function returns 0 on succsess and negative error code on
+ * failure
+ */
+static int si476x_core_send_command(struct si476x_core *core,
+ const u8 command,
+ const u8 args[],
+ const int argn,
+ u8 resp[],
+ const int respn,
+ const int usecs)
+{
+ struct i2c_client *client = core->client;
+ int err;
+ u8 data[CMD_MAX_ARGS_COUNT + 1];
+
+ if (argn > CMD_MAX_ARGS_COUNT) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ if (!client->adapter) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ /* First send the command and its arguments */
+ data[0] = command;
+ memcpy(&data[1], args, argn);
+ dev_dbg(&client->dev, "Command:\n %*ph\n", argn + 1, data);
+
+ err = si476x_core_i2c_xfer(core, SI476X_I2C_SEND,
+ (char *) data, argn + 1);
+ if (err != argn + 1) {
+ dev_err(&core->client->dev,
+ "Error while sending command 0x%02x\n",
+ command);
+ err = (err >= 0) ? -EIO : err;
+ goto exit;
+ }
+ /* Set CTS to zero only after the command is send to avoid
+ * possible racing conditions when working in polling mode */
+ atomic_set(&core->cts, 0);
+
+ /* if (unlikely(command == CMD_POWER_DOWN) */
+ if (!wait_event_timeout(core->command,
+ atomic_read(&core->cts),
+ usecs_to_jiffies(usecs) + 1))
+ dev_warn(&core->client->dev,
+ "(%s) [CMD 0x%02x] Answer timeout.\n",
+ __func__, command);
+
+ /*
+ When working in polling mode, for some reason the tuner will
+ report CTS bit as being set in the first status byte read,
+ but all the consequtive ones will return zeros until the
+ tuner is actually completed the POWER_UP command. To
+ workaround that we wait for second CTS to be reported
+ */
+ if (unlikely(!core->client->irq && command == CMD_POWER_UP)) {
+ if (!wait_event_timeout(core->command,
+ atomic_read(&core->cts),
+ usecs_to_jiffies(usecs) + 1))
+ dev_warn(&core->client->dev,
+ "(%s) Power up took too much time.\n",
+ __func__);
+ }
+
+ /* Then get the response */
+ err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV, resp, respn);
+ if (err != respn) {
+ dev_err(&core->client->dev,
+ "Error while reading response for command 0x%02x\n",
+ command);
+ err = (err >= 0) ? -EIO : err;
+ goto exit;
+ }
+ dev_dbg(&client->dev, "Response:\n %*ph\n", respn, resp);
+
+ err = 0;
+
+ if (resp[0] & SI476X_ERR) {
+ dev_err(&core->client->dev,
+ "[CMD 0x%02x] Chip set error flag\n", command);
+ err = si476x_core_parse_and_nag_about_error(core);
+ goto exit;
+ }
+
+ if (!(resp[0] & SI476X_CTS))
+ err = -EBUSY;
+exit:
+ return err;
+}
+
+static int si476x_cmd_clear_stc(struct si476x_core *core)
+{
+ int err;
+ struct si476x_rsq_status_args args = {
+ .primary = false,
+ .rsqack = false,
+ .attune = false,
+ .cancel = false,
+ .stcack = true,
+ };
+
+ switch (core->power_up_parameters.func) {
+ case SI476X_FUNC_FM_RECEIVER:
+ err = si476x_core_cmd_fm_rsq_status(core, &args, NULL);
+ break;
+ case SI476X_FUNC_AM_RECEIVER:
+ err = si476x_core_cmd_am_rsq_status(core, &args, NULL);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+static int si476x_cmd_tune_seek_freq(struct si476x_core *core,
+ uint8_t cmd,
+ const uint8_t args[], size_t argn,
+ uint8_t *resp, size_t respn)
+{
+ int err;
+
+
+ atomic_set(&core->stc, 0);
+ err = si476x_core_send_command(core, cmd, args, argn, resp, respn,
+ SI476X_TIMEOUT_TUNE);
+ if (!err) {
+ wait_event_killable(core->tuning,
+ atomic_read(&core->stc));
+ si476x_cmd_clear_stc(core);
+ }
+
+ return err;
+}
+
+/**
+ * si476x_cmd_func_info() - send 'FUNC_INFO' command to the device
+ * @core: device to send the command to
+ * @info: struct si476x_func_info to fill all the information
+ * returned by the command
+ *
+ * The command requests the firmware and patch version for currently
+ * loaded firmware (dependent on the function of the device FM/AM/WB)
+ *
+ * Function returns 0 on succsess and negative error code on
+ * failure
+ */
+int si476x_core_cmd_func_info(struct si476x_core *core,
+ struct si476x_func_info *info)
+{
+ int err;
+ u8 resp[CMD_FUNC_INFO_NRESP];
+
+ err = si476x_core_send_command(core, CMD_FUNC_INFO,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+
+ info->firmware.major = resp[1];
+ info->firmware.minor[0] = resp[2];
+ info->firmware.minor[1] = resp[3];
+
+ info->patch_id = ((u16) resp[4] << 8) | resp[5];
+ info->func = resp[6];
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_func_info);
+
+/**
+ * si476x_cmd_set_property() - send 'SET_PROPERTY' command to the device
+ * @core: device to send the command to
+ * @property: property address
+ * @value: property value
+ *
+ * Function returns 0 on succsess and negative error code on
+ * failure
+ */
+int si476x_core_cmd_set_property(struct si476x_core *core,
+ u16 property, u16 value)
+{
+ u8 resp[CMD_SET_PROPERTY_NRESP];
+ const u8 args[CMD_SET_PROPERTY_NARGS] = {
+ 0x00,
+ msb(property),
+ lsb(property),
+ msb(value),
+ lsb(value),
+ };
+
+ return si476x_core_send_command(core, CMD_SET_PROPERTY,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_set_property);
+
+/**
+ * si476x_cmd_get_property() - send 'GET_PROPERTY' command to the device
+ * @core: device to send the command to
+ * @property: property address
+ *
+ * Function return the value of property as u16 on success or a
+ * negative error on failure
+ */
+int si476x_core_cmd_get_property(struct si476x_core *core, u16 property)
+{
+ int err;
+ u8 resp[CMD_GET_PROPERTY_NRESP];
+ const u8 args[CMD_GET_PROPERTY_NARGS] = {
+ 0x00,
+ msb(property),
+ lsb(property),
+ };
+
+ err = si476x_core_send_command(core, CMD_GET_PROPERTY,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+ else
+ return be16_to_cpup((__be16 *)(resp + 2));
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property);
+
+/**
+ * si476x_cmd_dig_audio_pin_cfg() - send 'DIG_AUDIO_PIN_CFG' command to
+ * the device
+ * @core: device to send the command to
+ * @dclk: DCLK pin function configuration:
+ * #SI476X_DCLK_NOOP - do not modify the behaviour
+ * #SI476X_DCLK_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * #SI476X_DCLK_DAUDIO - set the pin to be a part of digital
+ * audio interface
+ * @dfs: DFS pin function configuration:
+ * #SI476X_DFS_NOOP - do not modify the behaviour
+ * #SI476X_DFS_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_DFS_DAUDIO - set the pin to be a part of digital
+ * audio interface
+ * @dout - DOUT pin function configuration:
+ * SI476X_DOUT_NOOP - do not modify the behaviour
+ * SI476X_DOUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_DOUT_I2S_OUTPUT - set this pin to be digital out on I2S
+ * port 1
+ * SI476X_DOUT_I2S_INPUT - set this pin to be digital in on I2S
+ * port 1
+ * @xout - XOUT pin function configuration:
+ * SI476X_XOUT_NOOP - do not modify the behaviour
+ * SI476X_XOUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_XOUT_I2S_INPUT - set this pin to be digital in on I2S
+ * port 1
+ * SI476X_XOUT_MODE_SELECT - set this pin to be the input that
+ * selects the mode of the I2S audio
+ * combiner (analog or HD)
+ * [SI4761/63/65/67 Only]
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *core,
+ enum si476x_dclk_config dclk,
+ enum si476x_dfs_config dfs,
+ enum si476x_dout_config dout,
+ enum si476x_xout_config xout)
+{
+ u8 resp[CMD_DIG_AUDIO_PIN_CFG_NRESP];
+ const u8 args[CMD_DIG_AUDIO_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(dclk),
+ PIN_CFG_BYTE(dfs),
+ PIN_CFG_BYTE(dout),
+ PIN_CFG_BYTE(xout),
+ };
+
+ return si476x_core_send_command(core, CMD_DIG_AUDIO_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_dig_audio_pin_cfg);
+
+/**
+ * si476x_cmd_zif_pin_cfg - send 'ZIF_PIN_CFG_COMMAND'
+ * @core - device to send the command to
+ * @iqclk - IQCL pin function configuration:
+ * SI476X_IQCLK_NOOP - do not modify the behaviour
+ * SI476X_IQCLK_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_IQCLK_IQ - set pin to be a part of I/Q interace
+ * in master mode
+ * @iqfs - IQFS pin function configuration:
+ * SI476X_IQFS_NOOP - do not modify the behaviour
+ * SI476X_IQFS_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_IQFS_IQ - set pin to be a part of I/Q interace
+ * in master mode
+ * @iout - IOUT pin function configuration:
+ * SI476X_IOUT_NOOP - do not modify the behaviour
+ * SI476X_IOUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_IOUT_OUTPUT - set pin to be I out
+ * @qout - QOUT pin function configuration:
+ * SI476X_QOUT_NOOP - do not modify the behaviour
+ * SI476X_QOUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_QOUT_OUTPUT - set pin to be Q out
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_zif_pin_cfg(struct si476x_core *core,
+ enum si476x_iqclk_config iqclk,
+ enum si476x_iqfs_config iqfs,
+ enum si476x_iout_config iout,
+ enum si476x_qout_config qout)
+{
+ u8 resp[CMD_ZIF_PIN_CFG_NRESP];
+ const u8 args[CMD_ZIF_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(iqclk),
+ PIN_CFG_BYTE(iqfs),
+ PIN_CFG_BYTE(iout),
+ PIN_CFG_BYTE(qout),
+ };
+
+ return si476x_core_send_command(core, CMD_ZIF_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_zif_pin_cfg);
+
+/**
+ * si476x_cmd_ic_link_gpo_ctl_pin_cfg - send
+ * 'IC_LINK_GPIO_CTL_PIN_CFG' comand to the device
+ * @core - device to send the command to
+ * @icin - ICIN pin function configuration:
+ * SI476X_ICIN_NOOP - do not modify the behaviour
+ * SI476X_ICIN_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_ICIN_GPO1_HIGH - set pin to be an output, drive it high
+ * SI476X_ICIN_GPO1_LOW - set pin to be an output, drive it low
+ * SI476X_ICIN_IC_LINK - set the pin to be a part of Inter-Chip link
+ * @icip - ICIP pin function configuration:
+ * SI476X_ICIP_NOOP - do not modify the behaviour
+ * SI476X_ICIP_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_ICIP_GPO1_HIGH - set pin to be an output, drive it high
+ * SI476X_ICIP_GPO1_LOW - set pin to be an output, drive it low
+ * SI476X_ICIP_IC_LINK - set the pin to be a part of Inter-Chip link
+ * @icon - ICON pin function configuration:
+ * SI476X_ICON_NOOP - do not modify the behaviour
+ * SI476X_ICON_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_ICON_I2S - set the pin to be a part of audio
+ * interface in slave mode (DCLK)
+ * SI476X_ICON_IC_LINK - set the pin to be a part of Inter-Chip link
+ * @icop - ICOP pin function configuration:
+ * SI476X_ICOP_NOOP - do not modify the behaviour
+ * SI476X_ICOP_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_ICOP_I2S - set the pin to be a part of audio
+ * interface in slave mode (DOUT)
+ * [Si4761/63/65/67 Only]
+ * SI476X_ICOP_IC_LINK - set the pin to be a part of Inter-Chip link
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *core,
+ enum si476x_icin_config icin,
+ enum si476x_icip_config icip,
+ enum si476x_icon_config icon,
+ enum si476x_icop_config icop)
+{
+ u8 resp[CMD_IC_LINK_GPO_CTL_PIN_CFG_NRESP];
+ const u8 args[CMD_IC_LINK_GPO_CTL_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(icin),
+ PIN_CFG_BYTE(icip),
+ PIN_CFG_BYTE(icon),
+ PIN_CFG_BYTE(icop),
+ };
+
+ return si476x_core_send_command(core, CMD_IC_LINK_GPO_CTL_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_ic_link_gpo_ctl_pin_cfg);
+
+/**
+ * si476x_cmd_ana_audio_pin_cfg - send 'ANA_AUDIO_PIN_CFG' to the
+ * device
+ * @core - device to send the command to
+ * @lrout - LROUT pin function configuration:
+ * SI476X_LROUT_NOOP - do not modify the behaviour
+ * SI476X_LROUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_LROUT_AUDIO - set pin to be audio output
+ * SI476X_LROUT_MPX - set pin to be MPX output
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *core,
+ enum si476x_lrout_config lrout)
+{
+ u8 resp[CMD_ANA_AUDIO_PIN_CFG_NRESP];
+ const u8 args[CMD_ANA_AUDIO_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(lrout),
+ };
+
+ return si476x_core_send_command(core, CMD_ANA_AUDIO_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_ana_audio_pin_cfg);
+
+
+/**
+ * si476x_cmd_intb_pin_cfg - send 'INTB_PIN_CFG' command to the device
+ * @core - device to send the command to
+ * @intb - INTB pin function configuration:
+ * SI476X_INTB_NOOP - do not modify the behaviour
+ * SI476X_INTB_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_INTB_DAUDIO - set pin to be a part of digital
+ * audio interface in slave mode
+ * SI476X_INTB_IRQ - set pin to be an interrupt request line
+ * @a1 - A1 pin function configuration:
+ * SI476X_A1_NOOP - do not modify the behaviour
+ * SI476X_A1_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_A1_IRQ - set pin to be an interrupt request line
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+static int si476x_core_cmd_intb_pin_cfg_a10(struct si476x_core *core,
+ enum si476x_intb_config intb,
+ enum si476x_a1_config a1)
+{
+ u8 resp[CMD_INTB_PIN_CFG_A10_NRESP];
+ const u8 args[CMD_INTB_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(intb),
+ PIN_CFG_BYTE(a1),
+ };
+
+ return si476x_core_send_command(core, CMD_INTB_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+
+static int si476x_core_cmd_intb_pin_cfg_a20(struct si476x_core *core,
+ enum si476x_intb_config intb,
+ enum si476x_a1_config a1)
+{
+ u8 resp[CMD_INTB_PIN_CFG_A20_NRESP];
+ const u8 args[CMD_INTB_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(intb),
+ PIN_CFG_BYTE(a1),
+ };
+
+ return si476x_core_send_command(core, CMD_INTB_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+
+
+
+/**
+ * si476x_cmd_am_rsq_status - send 'AM_RSQ_STATUS' command to the
+ * device
+ * @core - device to send the command to
+ * @rsqack - if set command clears RSQINT, SNRINT, SNRLINT, RSSIHINT,
+ * RSSSILINT, BLENDINT, MULTHINT and MULTLINT
+ * @attune - when set the values in the status report are the values
+ * that were calculated at tune
+ * @cancel - abort ongoing seek/tune opertation
+ * @stcack - clear the STCINT bin in status register
+ * @report - all signal quality information retured by the command
+ * (if NULL then the output of the command is ignored)
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_am_rsq_status(struct si476x_core *core,
+ struct si476x_rsq_status_args *rsqargs,
+ struct si476x_rsq_status_report *report)
+{
+ int err;
+ u8 resp[CMD_AM_RSQ_STATUS_NRESP];
+ const u8 args[CMD_AM_RSQ_STATUS_NARGS] = {
+ rsqargs->rsqack << 3 | rsqargs->attune << 2 |
+ rsqargs->cancel << 1 | rsqargs->stcack,
+ };
+
+ err = si476x_core_send_command(core, CMD_AM_RSQ_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting received signal quality information this
+ * command can be used to just acknowledge different interrupt
+ * flags in those cases it is useless to copy and parse
+ * received data so user can pass NULL, and thus avoid
+ * unnecessary copying.
+ */
+ if (!report)
+ return err;
+
+ report->snrhint = 0b00001000 & resp[1];
+ report->snrlint = 0b00000100 & resp[1];
+ report->rssihint = 0b00000010 & resp[1];
+ report->rssilint = 0b00000001 & resp[1];
+
+ report->bltf = 0b10000000 & resp[2];
+ report->snr_ready = 0b00100000 & resp[2];
+ report->rssiready = 0b00001000 & resp[2];
+ report->afcrl = 0b00000010 & resp[2];
+ report->valid = 0b00000001 & resp[2];
+
+ report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->freqoff = resp[5];
+ report->rssi = resp[6];
+ report->snr = resp[7];
+ report->lassi = resp[9];
+ report->hassi = resp[10];
+ report->mult = resp[11];
+ report->dev = resp[12];
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_rsq_status);
+
+int si476x_core_cmd_fm_acf_status(struct si476x_core *core,
+ struct si476x_acf_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_ACF_STATUS_NRESP];
+ const u8 args[CMD_FM_ACF_STATUS_NARGS] = {
+ 0x0,
+ };
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_FM_ACF_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+
+ report->blend_int = resp[1] & SI476X_ACF_BLEND_INT;
+ report->hblend_int = resp[1] & SI476X_ACF_HIBLEND_INT;
+ report->hicut_int = resp[1] & SI476X_ACF_HICUT_INT;
+ report->chbw_int = resp[1] & SI476X_ACF_CHBW_INT;
+ report->softmute_int = resp[1] & SI476X_ACF_SOFTMUTE_INT;
+ report->smute = resp[2] & SI476X_ACF_SMUTE;
+ report->smattn = resp[3] & SI476X_ACF_SMATTN;
+ report->chbw = resp[4];
+ report->hicut = resp[5];
+ report->hiblend = resp[6];
+ report->pilot = resp[7] & SI476X_ACF_PILOT;
+ report->stblend = resp[7] & SI476X_ACF_STBLEND;
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_acf_status);
+
+int si476x_core_cmd_am_acf_status(struct si476x_core *core,
+ struct si476x_acf_status_report *report)
+{
+ int err;
+ u8 resp[CMD_AM_ACF_STATUS_NRESP];
+ const u8 args[CMD_AM_ACF_STATUS_NARGS] = {
+ 0x0,
+ };
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_AM_ACF_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+
+ report->blend_int = resp[1] & SI476X_ACF_BLEND_INT;
+ report->hblend_int = resp[1] & SI476X_ACF_HIBLEND_INT;
+ report->hicut_int = resp[1] & SI476X_ACF_HICUT_INT;
+ report->chbw_int = resp[1] & SI476X_ACF_CHBW_INT;
+ report->softmute_int = resp[1] & SI476X_ACF_SOFTMUTE_INT;
+ report->smute = resp[2] & SI476X_ACF_SMUTE;
+ report->smattn = resp[3] & SI476X_ACF_SMATTN;
+ report->chbw = resp[4];
+ report->hicut = resp[5];
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_acf_status);
+
+
+/**
+ * si476x_cmd_fm_seek_start - send 'FM_SEEK_START' command to the
+ * device
+ * @core - device to send the command to
+ * @seekup - if set the direction of the search is 'up'
+ * @wrap - if set seek wraps when hitting band limit
+ *
+ * This function begins search for a valid station. The station is
+ * considered valid when 'FM_VALID_SNR_THRESHOLD' and
+ * 'FM_VALID_RSSI_THRESHOLD' and 'FM_VALID_MAX_TUNE_ERROR' criteria
+ * are met.
+} *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_fm_seek_start(struct si476x_core *core,
+ bool seekup, bool wrap)
+{
+ u8 resp[CMD_FM_SEEK_START_NRESP];
+ const u8 args[CMD_FM_SEEK_START_NARGS] = {
+ seekup << 3 | wrap << 2,
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_FM_SEEK_START,
+ args, sizeof(args),
+ resp, sizeof(resp));
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_seek_start);
+
+/**
+ * si476x_cmd_fm_rds_status - send 'FM_RDS_STATUS' command to the
+ * device
+ * @core - device to send the command to
+ * @status_only - if set the data is not removed from RDSFIFO,
+ * RDSFIFOUSED is not decremented and data in all the
+ * rest RDS data contains the last valid info received
+ * @mtfifo if set the command clears RDS receive FIFO
+ * @intack if set the command clards the RDSINT bit.
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_fm_rds_status(struct si476x_core *core,
+ bool status_only,
+ bool mtfifo,
+ bool intack,
+ struct si476x_rds_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RDS_STATUS_NRESP];
+ const u8 args[CMD_FM_RDS_STATUS_NARGS] = {
+ status_only << 2 | mtfifo << 1 | intack,
+ };
+
+ err = si476x_core_send_command(core, CMD_FM_RDS_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting RDS status information this command can be
+ * used to just acknowledge different interrupt flags in those
+ * cases it is useless to copy and parse received data so user
+ * can pass NULL, and thus avoid unnecessary copying.
+ */
+ if (err < 0 || report == NULL)
+ return err;
+
+ report->rdstpptyint = 0b00010000 & resp[1];
+ report->rdspiint = 0b00001000 & resp[1];
+ report->rdssyncint = 0b00000010 & resp[1];
+ report->rdsfifoint = 0b00000001 & resp[1];
+
+ report->tpptyvalid = 0b00010000 & resp[2];
+ report->pivalid = 0b00001000 & resp[2];
+ report->rdssync = 0b00000010 & resp[2];
+ report->rdsfifolost = 0b00000001 & resp[2];
+
+ report->tp = 0b00100000 & resp[3];
+ report->pty = 0b00011111 & resp[3];
+
+ report->pi = be16_to_cpup((__be16 *)(resp + 4));
+ report->rdsfifoused = resp[6];
+
+ report->ble[V4L2_RDS_BLOCK_A] = 0b11000000 & resp[7];
+ report->ble[V4L2_RDS_BLOCK_B] = 0b00110000 & resp[7];
+ report->ble[V4L2_RDS_BLOCK_C] = 0b00001100 & resp[7];
+ report->ble[V4L2_RDS_BLOCK_D] = 0b00000011 & resp[7];
+
+ report->rds[V4L2_RDS_BLOCK_A].block = V4L2_RDS_BLOCK_A;
+ report->rds[V4L2_RDS_BLOCK_A].msb = resp[8];
+ report->rds[V4L2_RDS_BLOCK_A].lsb = resp[9];
+
+ report->rds[V4L2_RDS_BLOCK_B].block = V4L2_RDS_BLOCK_B;
+ report->rds[V4L2_RDS_BLOCK_B].msb = resp[10];
+ report->rds[V4L2_RDS_BLOCK_B].lsb = resp[11];
+
+ report->rds[V4L2_RDS_BLOCK_C].block = V4L2_RDS_BLOCK_C;
+ report->rds[V4L2_RDS_BLOCK_C].msb = resp[12];
+ report->rds[V4L2_RDS_BLOCK_C].lsb = resp[13];
+
+ report->rds[V4L2_RDS_BLOCK_D].block = V4L2_RDS_BLOCK_D;
+ report->rds[V4L2_RDS_BLOCK_D].msb = resp[14];
+ report->rds[V4L2_RDS_BLOCK_D].lsb = resp[15];
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rds_status);
+
+int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *core,
+ bool clear,
+ struct si476x_rds_blockcount_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RDS_BLOCKCOUNT_NRESP];
+ const u8 args[CMD_FM_RDS_BLOCKCOUNT_NARGS] = {
+ clear,
+ };
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_FM_RDS_BLOCKCOUNT,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+
+ if (!err) {
+ report->expected = be16_to_cpup((__be16 *)(resp + 2));
+ report->received = be16_to_cpup((__be16 *)(resp + 4));
+ report->uncorrectable = be16_to_cpup((__be16 *)(resp + 6));
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rds_blockcount);
+
+int si476x_core_cmd_fm_phase_diversity(struct si476x_core *core,
+ enum si476x_phase_diversity_mode mode)
+{
+ u8 resp[CMD_FM_PHASE_DIVERSITY_NRESP];
+ const u8 args[CMD_FM_PHASE_DIVERSITY_NARGS] = {
+ mode & 0b111,
+ };
+
+ return si476x_core_send_command(core, CMD_FM_PHASE_DIVERSITY,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_diversity);
+/**
+ * si476x_core_cmd_fm_phase_div_status() - get the phase diversity
+ * status
+ *
+ * @core: si476x device
+ *
+ * NOTE caller must hold core lock
+ *
+ * Function returns the value of the status bit in case of success and
+ * negative error code in case of failre.
+ */
+int si476x_core_cmd_fm_phase_div_status(struct si476x_core *core)
+{
+ int err;
+ u8 resp[CMD_FM_PHASE_DIV_STATUS_NRESP];
+
+ err = si476x_core_send_command(core, CMD_FM_PHASE_DIV_STATUS,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+
+ return (err < 0) ? err : resp[1];
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_div_status);
+
+
+/**
+ * si476x_cmd_am_seek_start - send 'FM_SEEK_START' command to the
+ * device
+ * @core - device to send the command to
+ * @seekup - if set the direction of the search is 'up'
+ * @wrap - if set seek wraps when hitting band limit
+ *
+ * This function begins search for a valid station. The station is
+ * considered valid when 'FM_VALID_SNR_THRESHOLD' and
+ * 'FM_VALID_RSSI_THRESHOLD' and 'FM_VALID_MAX_TUNE_ERROR' criteria
+ * are met.
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_am_seek_start(struct si476x_core *core,
+ bool seekup, bool wrap)
+{
+ u8 resp[CMD_AM_SEEK_START_NRESP];
+ const u8 args[CMD_AM_SEEK_START_NARGS] = {
+ seekup << 3 | wrap << 2,
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_AM_SEEK_START,
+ args, sizeof(args),
+ resp, sizeof(resp));
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_seek_start);
+
+
+
+static int si476x_core_cmd_power_up_a10(struct si476x_core *core,
+ struct si476x_power_up_args *puargs)
+{
+ u8 resp[CMD_POWER_UP_A10_NRESP];
+ const bool intsel = (core->pinmux.a1 == SI476X_A1_IRQ);
+ const bool ctsen = (core->client->irq != 0);
+ const u8 args[CMD_POWER_UP_A10_NARGS] = {
+ 0xF7, /* Reserved, always 0xF7 */
+ 0x3F & puargs->xcload, /* First two bits are reserved to be
+ * zeros */
+ ctsen << 7 | intsel << 6 | 0x07, /* Last five bits
+ * are reserved to
+ * be written as 0x7 */
+ puargs->func << 4 | puargs->freq,
+ 0x11, /* Reserved, always 0x11 */
+ };
+
+ return si476x_core_send_command(core, CMD_POWER_UP,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_TIMEOUT_POWER_UP);
+}
+
+static int si476x_core_cmd_power_up_a20(struct si476x_core *core,
+ struct si476x_power_up_args *puargs)
+{
+ u8 resp[CMD_POWER_UP_A20_NRESP];
+ const bool intsel = (core->pinmux.a1 == SI476X_A1_IRQ);
+ const bool ctsen = (core->client->irq != 0);
+ const u8 args[CMD_POWER_UP_A20_NARGS] = {
+ puargs->ibias6x << 7 | puargs->xstart,
+ 0x3F & puargs->xcload, /* First two bits are reserved to be
+ * zeros */
+ ctsen << 7 | intsel << 6 | puargs->fastboot << 5 |
+ puargs->xbiashc << 3 | puargs->xbias,
+ puargs->func << 4 | puargs->freq,
+ 0x10 | puargs->xmode,
+ };
+
+ return si476x_core_send_command(core, CMD_POWER_UP,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_TIMEOUT_POWER_UP);
+}
+
+static int si476x_core_cmd_power_down_a10(struct si476x_core *core,
+ struct si476x_power_down_args *pdargs)
+{
+ u8 resp[CMD_POWER_DOWN_A10_NRESP];
+
+ return si476x_core_send_command(core, CMD_POWER_DOWN,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+
+static int si476x_core_cmd_power_down_a20(struct si476x_core *core,
+ struct si476x_power_down_args *pdargs)
+{
+ u8 resp[CMD_POWER_DOWN_A20_NRESP];
+ const u8 args[CMD_POWER_DOWN_A20_NARGS] = {
+ pdargs->xosc,
+ };
+ return si476x_core_send_command(core, CMD_POWER_DOWN,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+
+static int si476x_core_cmd_am_tune_freq_a10(struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs)
+{
+
+ const int am_freq = tuneargs->freq;
+ u8 resp[CMD_AM_TUNE_FREQ_NRESP];
+ const u8 args[CMD_AM_TUNE_FREQ_NARGS] = {
+ (tuneargs->hd << 6),
+ msb(am_freq),
+ lsb(am_freq),
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_AM_TUNE_FREQ, args,
+ sizeof(args),
+ resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_am_tune_freq_a20(struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs)
+{
+ const int am_freq = tuneargs->freq;
+ u8 resp[CMD_AM_TUNE_FREQ_NRESP];
+ const u8 args[CMD_AM_TUNE_FREQ_NARGS] = {
+ (tuneargs->zifsr << 6) | (tuneargs->injside & 0b11),
+ msb(am_freq),
+ lsb(am_freq),
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_AM_TUNE_FREQ,
+ args, sizeof(args),
+ resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_fm_rsq_status_a10(struct si476x_core *core,
+ struct si476x_rsq_status_args *rsqargs,
+ struct si476x_rsq_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RSQ_STATUS_A10_NRESP];
+ const u8 args[CMD_FM_RSQ_STATUS_A10_NARGS] = {
+ rsqargs->rsqack << 3 | rsqargs->attune << 2 |
+ rsqargs->cancel << 1 | rsqargs->stcack,
+ };
+
+ err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting received signal quality information this
+ * command can be used to just acknowledge different interrupt
+ * flags in those cases it is useless to copy and parse
+ * received data so user can pass NULL, and thus avoid
+ * unnecessary copying.
+ */
+ if (err < 0 || report == NULL)
+ return err;
+
+ report->multhint = 0b10000000 & resp[1];
+ report->multlint = 0b01000000 & resp[1];
+ report->snrhint = 0b00001000 & resp[1];
+ report->snrlint = 0b00000100 & resp[1];
+ report->rssihint = 0b00000010 & resp[1];
+ report->rssilint = 0b00000001 & resp[1];
+
+ report->bltf = 0b10000000 & resp[2];
+ report->snr_ready = 0b00100000 & resp[2];
+ report->rssiready = 0b00001000 & resp[2];
+ report->afcrl = 0b00000010 & resp[2];
+ report->valid = 0b00000001 & resp[2];
+
+ report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->freqoff = resp[5];
+ report->rssi = resp[6];
+ report->snr = resp[7];
+ report->lassi = resp[9];
+ report->hassi = resp[10];
+ report->mult = resp[11];
+ report->dev = resp[12];
+ report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
+ report->assi = resp[15];
+ report->usn = resp[16];
+
+ return err;
+}
+
+static int si476x_core_cmd_fm_rsq_status_a20(struct si476x_core *core,
+ struct si476x_rsq_status_args *rsqargs,
+ struct si476x_rsq_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RSQ_STATUS_A10_NRESP];
+ const u8 args[CMD_FM_RSQ_STATUS_A30_NARGS] = {
+ rsqargs->primary << 4 | rsqargs->rsqack << 3 |
+ rsqargs->attune << 2 | rsqargs->cancel << 1 |
+ rsqargs->stcack,
+ };
+
+ err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting received signal quality information this
+ * command can be used to just acknowledge different interrupt
+ * flags in those cases it is useless to copy and parse
+ * received data so user can pass NULL, and thus avoid
+ * unnecessary copying.
+ */
+ if (err < 0 || report == NULL)
+ return err;
+
+ report->multhint = 0b10000000 & resp[1];
+ report->multlint = 0b01000000 & resp[1];
+ report->snrhint = 0b00001000 & resp[1];
+ report->snrlint = 0b00000100 & resp[1];
+ report->rssihint = 0b00000010 & resp[1];
+ report->rssilint = 0b00000001 & resp[1];
+
+ report->bltf = 0b10000000 & resp[2];
+ report->snr_ready = 0b00100000 & resp[2];
+ report->rssiready = 0b00001000 & resp[2];
+ report->afcrl = 0b00000010 & resp[2];
+ report->valid = 0b00000001 & resp[2];
+
+ report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->freqoff = resp[5];
+ report->rssi = resp[6];
+ report->snr = resp[7];
+ report->lassi = resp[9];
+ report->hassi = resp[10];
+ report->mult = resp[11];
+ report->dev = resp[12];
+ report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
+ report->assi = resp[15];
+ report->usn = resp[16];
+
+ return err;
+}
+
+
+static int si476x_core_cmd_fm_rsq_status_a30(struct si476x_core *core,
+ struct si476x_rsq_status_args *rsqargs,
+ struct si476x_rsq_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RSQ_STATUS_A30_NRESP];
+ const u8 args[CMD_FM_RSQ_STATUS_A30_NARGS] = {
+ rsqargs->primary << 4 | rsqargs->rsqack << 3 |
+ rsqargs->attune << 2 | rsqargs->cancel << 1 |
+ rsqargs->stcack,
+ };
+
+ err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting received signal quality information this
+ * command can be used to just acknowledge different interrupt
+ * flags in those cases it is useless to copy and parse
+ * received data so user can pass NULL, and thus avoid
+ * unnecessary copying.
+ */
+ if (err < 0 || report == NULL)
+ return err;
+
+ report->multhint = 0b10000000 & resp[1];
+ report->multlint = 0b01000000 & resp[1];
+ report->snrhint = 0b00001000 & resp[1];
+ report->snrlint = 0b00000100 & resp[1];
+ report->rssihint = 0b00000010 & resp[1];
+ report->rssilint = 0b00000001 & resp[1];
+
+ report->bltf = 0b10000000 & resp[2];
+ report->snr_ready = 0b00100000 & resp[2];
+ report->rssiready = 0b00001000 & resp[2];
+ report->injside = 0b00000100 & resp[2];
+ report->afcrl = 0b00000010 & resp[2];
+ report->valid = 0b00000001 & resp[2];
+
+ report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->freqoff = resp[5];
+ report->rssi = resp[6];
+ report->snr = resp[7];
+ report->issi = resp[8];
+ report->lassi = resp[9];
+ report->hassi = resp[10];
+ report->mult = resp[11];
+ report->dev = resp[12];
+ report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
+ report->assi = resp[15];
+ report->usn = resp[16];
+
+ report->pilotdev = resp[17];
+ report->rdsdev = resp[18];
+ report->assidev = resp[19];
+ report->strongdev = resp[20];
+ report->rdspi = be16_to_cpup((__be16 *)(resp + 21));
+
+ return err;
+}
+
+static int si476x_core_cmd_fm_tune_freq_a10(struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs)
+{
+ u8 resp[CMD_FM_TUNE_FREQ_NRESP];
+ const u8 args[CMD_FM_TUNE_FREQ_A10_NARGS] = {
+ (tuneargs->hd << 6) | (tuneargs->tunemode << 4)
+ | (tuneargs->smoothmetrics << 2),
+ msb(tuneargs->freq),
+ lsb(tuneargs->freq),
+ msb(tuneargs->antcap),
+ lsb(tuneargs->antcap)
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_FM_TUNE_FREQ,
+ args, sizeof(args),
+ resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_fm_tune_freq_a20(struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs)
+{
+ u8 resp[CMD_FM_TUNE_FREQ_NRESP];
+ const u8 args[CMD_FM_TUNE_FREQ_A20_NARGS] = {
+ (tuneargs->hd << 6) | (tuneargs->tunemode << 4)
+ | (tuneargs->smoothmetrics << 2) | (tuneargs->injside),
+ msb(tuneargs->freq),
+ lsb(tuneargs->freq),
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_FM_TUNE_FREQ,
+ args, sizeof(args),
+ resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_agc_status_a20(struct si476x_core *core,
+ struct si476x_agc_status_report *report)
+{
+ int err;
+ u8 resp[CMD_AGC_STATUS_NRESP_A20];
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_AGC_STATUS,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+
+ report->mxhi = resp[1] & SI476X_AGC_MXHI;
+ report->mxlo = resp[1] & SI476X_AGC_MXLO;
+ report->lnahi = resp[1] & SI476X_AGC_LNAHI;
+ report->lnalo = resp[1] & SI476X_AGC_LNALO;
+ report->fmagc1 = resp[2];
+ report->fmagc2 = resp[3];
+ report->pgagain = resp[4];
+ report->fmwblang = resp[5];
+
+ return err;
+}
+
+static int si476x_core_cmd_agc_status_a10(struct si476x_core *core,
+ struct si476x_agc_status_report *report)
+{
+ int err;
+ u8 resp[CMD_AGC_STATUS_NRESP_A10];
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_AGC_STATUS,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+
+ report->mxhi = resp[1] & SI476X_AGC_MXHI;
+ report->mxlo = resp[1] & SI476X_AGC_MXLO;
+ report->lnahi = resp[1] & SI476X_AGC_LNAHI;
+ report->lnalo = resp[1] & SI476X_AGC_LNALO;
+
+ return err;
+}
+
+typedef int (*tune_freq_func_t) (struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs);
+
+static struct {
+ int (*power_up) (struct si476x_core *,
+ struct si476x_power_up_args *);
+ int (*power_down) (struct si476x_core *,
+ struct si476x_power_down_args *);
+
+ tune_freq_func_t fm_tune_freq;
+ tune_freq_func_t am_tune_freq;
+
+ int (*fm_rsq_status)(struct si476x_core *,
+ struct si476x_rsq_status_args *,
+ struct si476x_rsq_status_report *);
+
+ int (*agc_status)(struct si476x_core *,
+ struct si476x_agc_status_report *);
+ int (*intb_pin_cfg)(struct si476x_core *core,
+ enum si476x_intb_config intb,
+ enum si476x_a1_config a1);
+} si476x_cmds_vtable[] = {
+ [SI476X_REVISION_A10] = {
+ .power_up = si476x_core_cmd_power_up_a10,
+ .power_down = si476x_core_cmd_power_down_a10,
+ .fm_tune_freq = si476x_core_cmd_fm_tune_freq_a10,
+ .am_tune_freq = si476x_core_cmd_am_tune_freq_a10,
+ .fm_rsq_status = si476x_core_cmd_fm_rsq_status_a10,
+ .agc_status = si476x_core_cmd_agc_status_a10,
+ .intb_pin_cfg = si476x_core_cmd_intb_pin_cfg_a10,
+ },
+ [SI476X_REVISION_A20] = {
+ .power_up = si476x_core_cmd_power_up_a20,
+ .power_down = si476x_core_cmd_power_down_a20,
+ .fm_tune_freq = si476x_core_cmd_fm_tune_freq_a20,
+ .am_tune_freq = si476x_core_cmd_am_tune_freq_a20,
+ .fm_rsq_status = si476x_core_cmd_fm_rsq_status_a20,
+ .agc_status = si476x_core_cmd_agc_status_a20,
+ .intb_pin_cfg = si476x_core_cmd_intb_pin_cfg_a20,
+ },
+ [SI476X_REVISION_A30] = {
+ .power_up = si476x_core_cmd_power_up_a20,
+ .power_down = si476x_core_cmd_power_down_a20,
+ .fm_tune_freq = si476x_core_cmd_fm_tune_freq_a20,
+ .am_tune_freq = si476x_core_cmd_am_tune_freq_a20,
+ .fm_rsq_status = si476x_core_cmd_fm_rsq_status_a30,
+ .agc_status = si476x_core_cmd_agc_status_a20,
+ .intb_pin_cfg = si476x_core_cmd_intb_pin_cfg_a20,
+ },
+};
+
+int si476x_core_cmd_power_up(struct si476x_core *core,
+ struct si476x_power_up_args *args)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].power_up(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_power_up);
+
+int si476x_core_cmd_power_down(struct si476x_core *core,
+ struct si476x_power_down_args *args)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].power_down(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_power_down);
+
+int si476x_core_cmd_fm_tune_freq(struct si476x_core *core,
+ struct si476x_tune_freq_args *args)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].fm_tune_freq(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_tune_freq);
+
+int si476x_core_cmd_am_tune_freq(struct si476x_core *core,
+ struct si476x_tune_freq_args *args)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].am_tune_freq(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_tune_freq);
+
+int si476x_core_cmd_fm_rsq_status(struct si476x_core *core,
+ struct si476x_rsq_status_args *args,
+ struct si476x_rsq_status_report *report)
+
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].fm_rsq_status(core, args,
+ report);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rsq_status);
+
+int si476x_core_cmd_agc_status(struct si476x_core *core,
+ struct si476x_agc_status_report *report)
+
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].agc_status(core, report);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_agc_status);
+
+int si476x_core_cmd_intb_pin_cfg(struct si476x_core *core,
+ enum si476x_intb_config intb,
+ enum si476x_a1_config a1)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+
+ return si476x_cmds_vtable[core->revision].intb_pin_cfg(core, intb, a1);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_intb_pin_cfg);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("API for command exchange for si476x");
diff --git a/drivers/mfd/si476x-i2c.c b/drivers/mfd/si476x-i2c.c
new file mode 100644
index 00000000000..f5bc8e4bd4b
--- /dev/null
+++ b/drivers/mfd/si476x-i2c.c
@@ -0,0 +1,886 @@
+/*
+ * drivers/mfd/si476x-i2c.c -- Core device driver for si476x MFD
+ * device
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+#include <linux/module.h>
+
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+
+#include <linux/mfd/si476x-core.h>
+
+#define SI476X_MAX_IO_ERRORS 10
+#define SI476X_DRIVER_RDS_FIFO_DEPTH 128
+
+/**
+ * si476x_core_config_pinmux() - pin function configuration function
+ *
+ * @core: Core device structure
+ *
+ * Configure the functions of the pins of the radio chip.
+ *
+ * The function returns zero in case of succes or negative error code
+ * otherwise.
+ */
+static int si476x_core_config_pinmux(struct si476x_core *core)
+{
+ int err;
+ dev_dbg(&core->client->dev, "Configuring pinmux\n");
+ err = si476x_core_cmd_dig_audio_pin_cfg(core,
+ core->pinmux.dclk,
+ core->pinmux.dfs,
+ core->pinmux.dout,
+ core->pinmux.xout);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure digital audio pins(err = %d)\n",
+ err);
+ return err;
+ }
+
+ err = si476x_core_cmd_zif_pin_cfg(core,
+ core->pinmux.iqclk,
+ core->pinmux.iqfs,
+ core->pinmux.iout,
+ core->pinmux.qout);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure ZIF pins(err = %d)\n",
+ err);
+ return err;
+ }
+
+ err = si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(core,
+ core->pinmux.icin,
+ core->pinmux.icip,
+ core->pinmux.icon,
+ core->pinmux.icop);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure IC-Link/GPO pins(err = %d)\n",
+ err);
+ return err;
+ }
+
+ err = si476x_core_cmd_ana_audio_pin_cfg(core,
+ core->pinmux.lrout);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure analog audio pins(err = %d)\n",
+ err);
+ return err;
+ }
+
+ err = si476x_core_cmd_intb_pin_cfg(core,
+ core->pinmux.intb,
+ core->pinmux.a1);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure interrupt pins(err = %d)\n",
+ err);
+ return err;
+ }
+
+ return 0;
+}
+
+static inline void si476x_core_schedule_polling_work(struct si476x_core *core)
+{
+ schedule_delayed_work(&core->status_monitor,
+ usecs_to_jiffies(SI476X_STATUS_POLL_US));
+}
+
+/**
+ * si476x_core_start() - early chip startup function
+ * @core: Core device structure
+ * @soft: When set, this flag forces "soft" startup, where "soft"
+ * power down is the one done by sending appropriate command instead
+ * of using reset pin of the tuner
+ *
+ * Perform required startup sequence to correctly power
+ * up the chip and perform initial configuration. It does the
+ * following sequence of actions:
+ * 1. Claims and enables the power supplies VD and VIO1 required
+ * for I2C interface of the chip operation.
+ * 2. Waits for 100us, pulls the reset line up, enables irq,
+ * waits for another 100us as it is specified by the
+ * datasheet.
+ * 3. Sends 'POWER_UP' command to the device with all provided
+ * information about power-up parameters.
+ * 4. Configures, pin multiplexor, disables digital audio and
+ * configures interrupt sources.
+ *
+ * The function returns zero in case of succes or negative error code
+ * otherwise.
+ */
+int si476x_core_start(struct si476x_core *core, bool soft)
+{
+ struct i2c_client *client = core->client;
+ int err;
+
+ if (!soft) {
+ if (gpio_is_valid(core->gpio_reset))
+ gpio_set_value_cansleep(core->gpio_reset, 1);
+
+ if (client->irq)
+ enable_irq(client->irq);
+
+ udelay(100);
+
+ if (!client->irq) {
+ atomic_set(&core->is_alive, 1);
+ si476x_core_schedule_polling_work(core);
+ }
+ } else {
+ if (client->irq)
+ enable_irq(client->irq);
+ else {
+ atomic_set(&core->is_alive, 1);
+ si476x_core_schedule_polling_work(core);
+ }
+ }
+
+ err = si476x_core_cmd_power_up(core,
+ &core->power_up_parameters);
+
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Power up failure(err = %d)\n",
+ err);
+ goto disable_irq;
+ }
+
+ if (client->irq)
+ atomic_set(&core->is_alive, 1);
+
+ err = si476x_core_config_pinmux(core);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure pinmux(err = %d)\n",
+ err);
+ goto disable_irq;
+ }
+
+ if (client->irq) {
+ err = regmap_write(core->regmap,
+ SI476X_PROP_INT_CTL_ENABLE,
+ SI476X_RDSIEN |
+ SI476X_STCIEN |
+ SI476X_CTSIEN);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure interrupt sources"
+ "(err = %d)\n", err);
+ goto disable_irq;
+ }
+ }
+
+ return 0;
+
+disable_irq:
+ if (err == -ENODEV)
+ atomic_set(&core->is_alive, 0);
+
+ if (client->irq)
+ disable_irq(client->irq);
+ else
+ cancel_delayed_work_sync(&core->status_monitor);
+
+ if (gpio_is_valid(core->gpio_reset))
+ gpio_set_value_cansleep(core->gpio_reset, 0);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_start);
+
+/**
+ * si476x_core_stop() - chip power-down function
+ * @core: Core device structure
+ * @soft: When set, function sends a POWER_DOWN command instead of
+ * bringing reset line low
+ *
+ * Power down the chip by performing following actions:
+ * 1. Disable IRQ or stop the polling worker
+ * 2. Send the POWER_DOWN command if the power down is soft or bring
+ * reset line low if not.
+ *
+ * The function returns zero in case of succes or negative error code
+ * otherwise.
+ */
+int si476x_core_stop(struct si476x_core *core, bool soft)
+{
+ int err = 0;
+ atomic_set(&core->is_alive, 0);
+
+ if (soft) {
+ /* TODO: This probably shoud be a configurable option,
+ * so it is possible to have the chips keep their
+ * oscillators running
+ */
+ struct si476x_power_down_args args = {
+ .xosc = false,
+ };
+ err = si476x_core_cmd_power_down(core, &args);
+ }
+
+ /* We couldn't disable those before
+ * 'si476x_core_cmd_power_down' since we expect to get CTS
+ * interrupt */
+ if (core->client->irq)
+ disable_irq(core->client->irq);
+ else
+ cancel_delayed_work_sync(&core->status_monitor);
+
+ if (!soft) {
+ if (gpio_is_valid(core->gpio_reset))
+ gpio_set_value_cansleep(core->gpio_reset, 0);
+ }
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_stop);
+
+/**
+ * si476x_core_set_power_state() - set the level at which the power is
+ * supplied for the chip.
+ * @core: Core device structure
+ * @next_state: enum si476x_power_state describing power state to
+ * switch to.
+ *
+ * Switch on all the required power supplies
+ *
+ * This function returns 0 in case of suvccess and negative error code
+ * otherwise.
+ */
+int si476x_core_set_power_state(struct si476x_core *core,
+ enum si476x_power_state next_state)
+{
+ /*
+ It is not clear form the datasheet if it is possible to
+ work with device if not all power domains are operational.
+ So for now the power-up policy is "power-up all the things!"
+ */
+ int err = 0;
+
+ if (core->power_state == SI476X_POWER_INCONSISTENT) {
+ dev_err(&core->client->dev,
+ "The device in inconsistent power state\n");
+ return -EINVAL;
+ }
+
+ if (next_state != core->power_state) {
+ switch (next_state) {
+ case SI476X_POWER_UP_FULL:
+ err = regulator_bulk_enable(ARRAY_SIZE(core->supplies),
+ core->supplies);
+ if (err < 0) {
+ core->power_state = SI476X_POWER_INCONSISTENT;
+ break;
+ }
+ /*
+ * Startup timing diagram recommends to have a
+ * 100 us delay between enabling of the power
+ * supplies and turning the tuner on.
+ */
+ udelay(100);
+
+ err = si476x_core_start(core, false);
+ if (err < 0)
+ goto disable_regulators;
+
+ core->power_state = next_state;
+ break;
+
+ case SI476X_POWER_DOWN:
+ core->power_state = next_state;
+ err = si476x_core_stop(core, false);
+ if (err < 0)
+ core->power_state = SI476X_POWER_INCONSISTENT;
+disable_regulators:
+ err = regulator_bulk_disable(ARRAY_SIZE(core->supplies),
+ core->supplies);
+ if (err < 0)
+ core->power_state = SI476X_POWER_INCONSISTENT;
+ break;
+ default:
+ BUG();
+ }
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_set_power_state);
+
+/**
+ * si476x_core_report_drainer_stop() - mark the completion of the RDS
+ * buffer drain porcess by the worker.
+ *
+ * @core: Core device structure
+ */
+static inline void si476x_core_report_drainer_stop(struct si476x_core *core)
+{
+ mutex_lock(&core->rds_drainer_status_lock);
+ core->rds_drainer_is_working = false;
+ mutex_unlock(&core->rds_drainer_status_lock);
+}
+
+/**
+ * si476x_core_start_rds_drainer_once() - start RDS drainer worker if
+ * ther is none working, do nothing otherwise
+ *
+ * @core: Datastructure corresponding to the chip.
+ */
+static inline void si476x_core_start_rds_drainer_once(struct si476x_core *core)
+{
+ mutex_lock(&core->rds_drainer_status_lock);
+ if (!core->rds_drainer_is_working) {
+ core->rds_drainer_is_working = true;
+ schedule_work(&core->rds_fifo_drainer);
+ }
+ mutex_unlock(&core->rds_drainer_status_lock);
+}
+/**
+ * si476x_drain_rds_fifo() - RDS buffer drainer.
+ * @work: struct work_struct being ppassed to the function by the
+ * kernel.
+ *
+ * Drain the contents of the RDS FIFO of
+ */
+static void si476x_core_drain_rds_fifo(struct work_struct *work)
+{
+ int err;
+
+ struct si476x_core *core = container_of(work, struct si476x_core,
+ rds_fifo_drainer);
+
+ struct si476x_rds_status_report report;
+
+ si476x_core_lock(core);
+ err = si476x_core_cmd_fm_rds_status(core, true, false, false, &report);
+ if (!err) {
+ int i = report.rdsfifoused;
+ dev_dbg(&core->client->dev,
+ "%d elements in RDS FIFO. Draining.\n", i);
+ for (; i > 0; --i) {
+ err = si476x_core_cmd_fm_rds_status(core, false, false,
+ (i == 1), &report);
+ if (err < 0)
+ goto unlock;
+
+ kfifo_in(&core->rds_fifo, report.rds,
+ sizeof(report.rds));
+ dev_dbg(&core->client->dev, "RDS data:\n %*ph\n",
+ (int)sizeof(report.rds), report.rds);
+ }
+ dev_dbg(&core->client->dev, "Drrrrained!\n");
+ wake_up_interruptible(&core->rds_read_queue);
+ }
+
+unlock:
+ si476x_core_unlock(core);
+ si476x_core_report_drainer_stop(core);
+}
+
+/**
+ * si476x_core_pronounce_dead()
+ *
+ * @core: Core device structure
+ *
+ * Mark the device as being dead and wake up all potentially waiting
+ * threads of execution.
+ *
+ */
+static void si476x_core_pronounce_dead(struct si476x_core *core)
+{
+ dev_info(&core->client->dev, "Core device is dead.\n");
+
+ atomic_set(&core->is_alive, 0);
+
+ /* Wake up al possible waiting processes */
+ wake_up_interruptible(&core->rds_read_queue);
+
+ atomic_set(&core->cts, 1);
+ wake_up(&core->command);
+
+ atomic_set(&core->stc, 1);
+ wake_up(&core->tuning);
+}
+
+/**
+ * si476x_core_i2c_xfer()
+ *
+ * @core: Core device structure
+ * @type: Transfer type
+ * @buf: Transfer buffer for/with data
+ * @count: Transfer buffer size
+ *
+ * Perfrom and I2C transfer(either read or write) and keep a counter
+ * of I/O errors. If the error counter rises above the threshold
+ * pronounce device dead.
+ *
+ * The function returns zero on succes or negative error code on
+ * failure.
+ */
+int si476x_core_i2c_xfer(struct si476x_core *core,
+ enum si476x_i2c_type type,
+ char *buf, int count)
+{
+ static int io_errors_count;
+ int err;
+ if (type == SI476X_I2C_SEND)
+ err = i2c_master_send(core->client, buf, count);
+ else
+ err = i2c_master_recv(core->client, buf, count);
+
+ if (err < 0) {
+ if (io_errors_count++ > SI476X_MAX_IO_ERRORS)
+ si476x_core_pronounce_dead(core);
+ } else {
+ io_errors_count = 0;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_i2c_xfer);
+
+/**
+ * si476x_get_status()
+ * @core: Core device structure
+ *
+ * Get the status byte of the core device by berforming one byte I2C
+ * read.
+ *
+ * The function returns a status value or a negative error code on
+ * error.
+ */
+static int si476x_core_get_status(struct si476x_core *core)
+{
+ u8 response;
+ int err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV,
+ &response, sizeof(response));
+
+ return (err < 0) ? err : response;
+}
+
+/**
+ * si476x_get_and_signal_status() - IRQ dispatcher
+ * @core: Core device structure
+ *
+ * Dispatch the arrived interrupt request based on the value of the
+ * status byte reported by the tuner.
+ *
+ */
+static void si476x_core_get_and_signal_status(struct si476x_core *core)
+{
+ int status = si476x_core_get_status(core);
+ if (status < 0) {
+ dev_err(&core->client->dev, "Failed to get status\n");
+ return;
+ }
+
+ if (status & SI476X_CTS) {
+ /* Unfortunately completions could not be used for
+ * signalling CTS since this flag cannot be cleared
+ * in status byte, and therefore once it becomes true
+ * multiple calls to 'complete' would cause the
+ * commands following the current one to be completed
+ * before they actually are */
+ dev_dbg(&core->client->dev, "[interrupt] CTSINT\n");
+ atomic_set(&core->cts, 1);
+ wake_up(&core->command);
+ }
+
+ if (status & SI476X_FM_RDS_INT) {
+ dev_dbg(&core->client->dev, "[interrupt] RDSINT\n");
+ si476x_core_start_rds_drainer_once(core);
+ }
+
+ if (status & SI476X_STC_INT) {
+ dev_dbg(&core->client->dev, "[interrupt] STCINT\n");
+ atomic_set(&core->stc, 1);
+ wake_up(&core->tuning);
+ }
+}
+
+static void si476x_core_poll_loop(struct work_struct *work)
+{
+ struct si476x_core *core = SI476X_WORK_TO_CORE(work);
+
+ si476x_core_get_and_signal_status(core);
+
+ if (atomic_read(&core->is_alive))
+ si476x_core_schedule_polling_work(core);
+}
+
+static irqreturn_t si476x_core_interrupt(int irq, void *dev)
+{
+ struct si476x_core *core = dev;
+
+ si476x_core_get_and_signal_status(core);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * si476x_firmware_version_to_revision()
+ * @core: Core device structure
+ * @major: Firmware major number
+ * @minor1: Firmware first minor number
+ * @minor2: Firmware second minor number
+ *
+ * Convert a chip's firmware version number into an offset that later
+ * will be used to as offset in "vtable" of tuner functions
+ *
+ * This function returns a positive offset in case of success and a -1
+ * in case of failure.
+ */
+static int si476x_core_fwver_to_revision(struct si476x_core *core,
+ int func, int major,
+ int minor1, int minor2)
+{
+ switch (func) {
+ case SI476X_FUNC_FM_RECEIVER:
+ switch (major) {
+ case 5:
+ return SI476X_REVISION_A10;
+ case 8:
+ return SI476X_REVISION_A20;
+ case 10:
+ return SI476X_REVISION_A30;
+ default:
+ goto unknown_revision;
+ }
+ case SI476X_FUNC_AM_RECEIVER:
+ switch (major) {
+ case 5:
+ return SI476X_REVISION_A10;
+ case 7:
+ return SI476X_REVISION_A20;
+ case 9:
+ return SI476X_REVISION_A30;
+ default:
+ goto unknown_revision;
+ }
+ case SI476X_FUNC_WB_RECEIVER:
+ switch (major) {
+ case 3:
+ return SI476X_REVISION_A10;
+ case 5:
+ return SI476X_REVISION_A20;
+ case 7:
+ return SI476X_REVISION_A30;
+ default:
+ goto unknown_revision;
+ }
+ case SI476X_FUNC_BOOTLOADER:
+ default: /* FALLTHROUG */
+ BUG();
+ return -1;
+ }
+
+unknown_revision:
+ dev_err(&core->client->dev,
+ "Unsupported version of the firmware: %d.%d.%d, "
+ "reverting to A10 comptible functions\n",
+ major, minor1, minor2);
+
+ return SI476X_REVISION_A10;
+}
+
+/**
+ * si476x_get_revision_info()
+ * @core: Core device structure
+ *
+ * Get the firmware version number of the device. It is done in
+ * following three steps:
+ * 1. Power-up the device
+ * 2. Send the 'FUNC_INFO' command
+ * 3. Powering the device down.
+ *
+ * The function return zero on success and a negative error code on
+ * failure.
+ */
+static int si476x_core_get_revision_info(struct si476x_core *core)
+{
+ int rval;
+ struct si476x_func_info info;
+
+ si476x_core_lock(core);
+ rval = si476x_core_set_power_state(core, SI476X_POWER_UP_FULL);
+ if (rval < 0)
+ goto exit;
+
+ rval = si476x_core_cmd_func_info(core, &info);
+ if (rval < 0)
+ goto power_down;
+
+ core->revision = si476x_core_fwver_to_revision(core, info.func,
+ info.firmware.major,
+ info.firmware.minor[0],
+ info.firmware.minor[1]);
+power_down:
+ si476x_core_set_power_state(core, SI476X_POWER_DOWN);
+exit:
+ si476x_core_unlock(core);
+
+ return rval;
+}
+
+bool si476x_core_has_am(struct si476x_core *core)
+{
+ return core->chip_id == SI476X_CHIP_SI4761 ||
+ core->chip_id == SI476X_CHIP_SI4764;
+}
+EXPORT_SYMBOL_GPL(si476x_core_has_am);
+
+bool si476x_core_has_diversity(struct si476x_core *core)
+{
+ return core->chip_id == SI476X_CHIP_SI4764;
+}
+EXPORT_SYMBOL_GPL(si476x_core_has_diversity);
+
+bool si476x_core_is_a_secondary_tuner(struct si476x_core *core)
+{
+ return si476x_core_has_diversity(core) &&
+ (core->diversity_mode == SI476X_PHDIV_SECONDARY_ANTENNA ||
+ core->diversity_mode == SI476X_PHDIV_SECONDARY_COMBINING);
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_a_secondary_tuner);
+
+bool si476x_core_is_a_primary_tuner(struct si476x_core *core)
+{
+ return si476x_core_has_diversity(core) &&
+ (core->diversity_mode == SI476X_PHDIV_PRIMARY_ANTENNA ||
+ core->diversity_mode == SI476X_PHDIV_PRIMARY_COMBINING);
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_a_primary_tuner);
+
+bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core)
+{
+ return si476x_core_has_am(core) &&
+ (core->power_up_parameters.func == SI476X_FUNC_AM_RECEIVER);
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_in_am_receiver_mode);
+
+bool si476x_core_is_powered_up(struct si476x_core *core)
+{
+ return core->power_state == SI476X_POWER_UP_FULL;
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_powered_up);
+
+static int si476x_core_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int rval;
+ struct si476x_core *core;
+ struct si476x_platform_data *pdata;
+ struct mfd_cell *cell;
+ int cell_num;
+
+ core = devm_kzalloc(&client->dev, sizeof(*core), GFP_KERNEL);
+ if (!core) {
+ dev_err(&client->dev,
+ "failed to allocate 'struct si476x_core'\n");
+ return -ENOMEM;
+ }
+ core->client = client;
+
+ core->regmap = devm_regmap_init_si476x(core);
+ if (IS_ERR(core->regmap)) {
+ rval = PTR_ERR(core->regmap);
+ dev_err(&client->dev,
+ "Failed to allocate register map: %d\n",
+ rval);
+ return rval;
+ }
+
+ i2c_set_clientdata(client, core);
+
+ atomic_set(&core->is_alive, 0);
+ core->power_state = SI476X_POWER_DOWN;
+
+ pdata = client->dev.platform_data;
+ if (pdata) {
+ memcpy(&core->power_up_parameters,
+ &pdata->power_up_parameters,
+ sizeof(core->power_up_parameters));
+
+ core->gpio_reset = -1;
+ if (gpio_is_valid(pdata->gpio_reset)) {
+ rval = gpio_request(pdata->gpio_reset, "si476x reset");
+ if (rval) {
+ dev_err(&client->dev,
+ "Failed to request gpio: %d\n", rval);
+ return rval;
+ }
+ core->gpio_reset = pdata->gpio_reset;
+ gpio_direction_output(core->gpio_reset, 0);
+ }
+
+ core->diversity_mode = pdata->diversity_mode;
+ memcpy(&core->pinmux, &pdata->pinmux,
+ sizeof(struct si476x_pinmux));
+ } else {
+ dev_err(&client->dev, "No platform data provided\n");
+ return -EINVAL;
+ }
+
+ core->supplies[0].supply = "vd";
+ core->supplies[1].supply = "va";
+ core->supplies[2].supply = "vio1";
+ core->supplies[3].supply = "vio2";
+
+ rval = devm_regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(core->supplies),
+ core->supplies);
+ if (rval) {
+ dev_err(&client->dev, "Failet to gett all of the regulators\n");
+ goto free_gpio;
+ }
+
+ mutex_init(&core->cmd_lock);
+ init_waitqueue_head(&core->command);
+ init_waitqueue_head(&core->tuning);
+
+ rval = kfifo_alloc(&core->rds_fifo,
+ SI476X_DRIVER_RDS_FIFO_DEPTH *
+ sizeof(struct v4l2_rds_data),
+ GFP_KERNEL);
+ if (rval) {
+ dev_err(&client->dev, "Could not alloate the FIFO\n");
+ goto free_gpio;
+ }
+ mutex_init(&core->rds_drainer_status_lock);
+ init_waitqueue_head(&core->rds_read_queue);
+ INIT_WORK(&core->rds_fifo_drainer, si476x_core_drain_rds_fifo);
+
+ if (client->irq) {
+ rval = devm_request_threaded_irq(&client->dev,
+ client->irq, NULL,
+ si476x_core_interrupt,
+ IRQF_TRIGGER_FALLING,
+ client->name, core);
+ if (rval < 0) {
+ dev_err(&client->dev, "Could not request IRQ %d\n",
+ client->irq);
+ goto free_kfifo;
+ }
+ disable_irq(client->irq);
+ dev_dbg(&client->dev, "IRQ requested.\n");
+
+ core->rds_fifo_depth = 20;
+ } else {
+ INIT_DELAYED_WORK(&core->status_monitor,
+ si476x_core_poll_loop);
+ dev_info(&client->dev,
+ "No IRQ number specified, will use polling\n");
+
+ core->rds_fifo_depth = 5;
+ }
+
+ core->chip_id = id->driver_data;
+
+ rval = si476x_core_get_revision_info(core);
+ if (rval < 0) {
+ rval = -ENODEV;
+ goto free_kfifo;
+ }
+
+ cell_num = 0;
+
+ cell = &core->cells[SI476X_RADIO_CELL];
+ cell->name = "si476x-radio";
+ cell_num++;
+
+#ifdef CONFIG_SND_SOC_SI476X
+ if ((core->chip_id == SI476X_CHIP_SI4761 ||
+ core->chip_id == SI476X_CHIP_SI4764) &&
+ core->pinmux.dclk == SI476X_DCLK_DAUDIO &&
+ core->pinmux.dfs == SI476X_DFS_DAUDIO &&
+ core->pinmux.dout == SI476X_DOUT_I2S_OUTPUT &&
+ core->pinmux.xout == SI476X_XOUT_TRISTATE) {
+ cell = &core->cells[SI476X_CODEC_CELL];
+ cell->name = "si476x-codec";
+ cell_num++;
+ }
+#endif
+ rval = mfd_add_devices(&client->dev,
+ (client->adapter->nr << 8) + client->addr,
+ core->cells, cell_num,
+ NULL, 0, NULL);
+ if (!rval)
+ return 0;
+
+free_kfifo:
+ kfifo_free(&core->rds_fifo);
+
+free_gpio:
+ if (gpio_is_valid(core->gpio_reset))
+ gpio_free(core->gpio_reset);
+
+ return rval;
+}
+
+static int si476x_core_remove(struct i2c_client *client)
+{
+ struct si476x_core *core = i2c_get_clientdata(client);
+
+ si476x_core_pronounce_dead(core);
+ mfd_remove_devices(&client->dev);
+
+ if (client->irq)
+ disable_irq(client->irq);
+ else
+ cancel_delayed_work_sync(&core->status_monitor);
+
+ kfifo_free(&core->rds_fifo);
+
+ if (gpio_is_valid(core->gpio_reset))
+ gpio_free(core->gpio_reset);
+
+ return 0;
+}
+
+
+static const struct i2c_device_id si476x_id[] = {
+ { "si4761", SI476X_CHIP_SI4761 },
+ { "si4764", SI476X_CHIP_SI4764 },
+ { "si4768", SI476X_CHIP_SI4768 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, si476x_id);
+
+static struct i2c_driver si476x_core_driver = {
+ .driver = {
+ .name = "si476x-core",
+ .owner = THIS_MODULE,
+ },
+ .probe = si476x_core_probe,
+ .remove = si476x_core_remove,
+ .id_table = si476x_id,
+};
+module_i2c_driver(si476x_core_driver);
+
+
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("Si4761/64/68 AM/FM MFD core device driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/si476x-prop.c b/drivers/mfd/si476x-prop.c
new file mode 100644
index 00000000000..cfeffa6e15d
--- /dev/null
+++ b/drivers/mfd/si476x-prop.c
@@ -0,0 +1,241 @@
+/*
+ * drivers/mfd/si476x-prop.c -- Subroutines to access
+ * properties of si476x chips
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#include <linux/module.h>
+
+#include <linux/mfd/si476x-core.h>
+
+struct si476x_property_range {
+ u16 low, high;
+};
+
+static bool si476x_core_element_is_in_array(u16 element,
+ const u16 array[],
+ size_t size)
+{
+ int i;
+
+ for (i = 0; i < size; i++)
+ if (element == array[i])
+ return true;
+
+ return false;
+}
+
+static bool si476x_core_element_is_in_range(u16 element,
+ const struct si476x_property_range range[],
+ size_t size)
+{
+ int i;
+
+ for (i = 0; i < size; i++)
+ if (element <= range[i].high && element >= range[i].low)
+ return true;
+
+ return false;
+}
+
+static bool si476x_core_is_valid_property_a10(struct si476x_core *core,
+ u16 property)
+{
+ static const u16 valid_properties[] = {
+ 0x0000,
+ 0x0500, 0x0501,
+ 0x0600,
+ 0x0709, 0x070C, 0x070D, 0x70E, 0x710,
+ 0x0718,
+ 0x1207, 0x1208,
+ 0x2007,
+ 0x2300,
+ };
+
+ static const struct si476x_property_range valid_ranges[] = {
+ { 0x0200, 0x0203 },
+ { 0x0300, 0x0303 },
+ { 0x0400, 0x0404 },
+ { 0x0700, 0x0707 },
+ { 0x1100, 0x1102 },
+ { 0x1200, 0x1204 },
+ { 0x1300, 0x1306 },
+ { 0x2000, 0x2005 },
+ { 0x2100, 0x2104 },
+ { 0x2106, 0x2106 },
+ { 0x2200, 0x220E },
+ { 0x3100, 0x3104 },
+ { 0x3207, 0x320F },
+ { 0x3300, 0x3304 },
+ { 0x3500, 0x3517 },
+ { 0x3600, 0x3617 },
+ { 0x3700, 0x3717 },
+ { 0x4000, 0x4003 },
+ };
+
+ return si476x_core_element_is_in_range(property, valid_ranges,
+ ARRAY_SIZE(valid_ranges)) ||
+ si476x_core_element_is_in_array(property, valid_properties,
+ ARRAY_SIZE(valid_properties));
+}
+
+static bool si476x_core_is_valid_property_a20(struct si476x_core *core,
+ u16 property)
+{
+ static const u16 valid_properties[] = {
+ 0x071B,
+ 0x1006,
+ 0x2210,
+ 0x3401,
+ };
+
+ static const struct si476x_property_range valid_ranges[] = {
+ { 0x2215, 0x2219 },
+ };
+
+ return si476x_core_is_valid_property_a10(core, property) ||
+ si476x_core_element_is_in_range(property, valid_ranges,
+ ARRAY_SIZE(valid_ranges)) ||
+ si476x_core_element_is_in_array(property, valid_properties,
+ ARRAY_SIZE(valid_properties));
+}
+
+static bool si476x_core_is_valid_property_a30(struct si476x_core *core,
+ u16 property)
+{
+ static const u16 valid_properties[] = {
+ 0x071C, 0x071D,
+ 0x1007, 0x1008,
+ 0x220F, 0x2214,
+ 0x2301,
+ 0x3105, 0x3106,
+ 0x3402,
+ };
+
+ static const struct si476x_property_range valid_ranges[] = {
+ { 0x0405, 0x0411 },
+ { 0x2008, 0x200B },
+ { 0x2220, 0x2223 },
+ { 0x3100, 0x3106 },
+ };
+
+ return si476x_core_is_valid_property_a20(core, property) ||
+ si476x_core_element_is_in_range(property, valid_ranges,
+ ARRAY_SIZE(valid_ranges)) ||
+ si476x_core_element_is_in_array(property, valid_properties,
+ ARRAY_SIZE(valid_properties));
+}
+
+typedef bool (*valid_property_pred_t) (struct si476x_core *, u16);
+
+static bool si476x_core_is_valid_property(struct si476x_core *core,
+ u16 property)
+{
+ static const valid_property_pred_t is_valid_property[] = {
+ [SI476X_REVISION_A10] = si476x_core_is_valid_property_a10,
+ [SI476X_REVISION_A20] = si476x_core_is_valid_property_a20,
+ [SI476X_REVISION_A30] = si476x_core_is_valid_property_a30,
+ };
+
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return is_valid_property[core->revision](core, property);
+}
+
+
+static bool si476x_core_is_readonly_property(struct si476x_core *core,
+ u16 property)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+
+ switch (core->revision) {
+ case SI476X_REVISION_A10:
+ return (property == 0x3200);
+ case SI476X_REVISION_A20:
+ return (property == 0x1006 ||
+ property == 0x2210 ||
+ property == 0x3200);
+ case SI476X_REVISION_A30:
+ return false;
+ }
+
+ return false;
+}
+
+static bool si476x_core_regmap_readable_register(struct device *dev,
+ unsigned int reg)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct si476x_core *core = i2c_get_clientdata(client);
+
+ return si476x_core_is_valid_property(core, (u16) reg);
+
+}
+
+static bool si476x_core_regmap_writable_register(struct device *dev,
+ unsigned int reg)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct si476x_core *core = i2c_get_clientdata(client);
+
+ return si476x_core_is_valid_property(core, (u16) reg) &&
+ !si476x_core_is_readonly_property(core, (u16) reg);
+}
+
+
+static int si476x_core_regmap_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ return si476x_core_cmd_set_property(context, reg, val);
+}
+
+static int si476x_core_regmap_read(void *context, unsigned int reg,
+ unsigned *val)
+{
+ struct si476x_core *core = context;
+ int err;
+
+ err = si476x_core_cmd_get_property(core, reg);
+ if (err < 0)
+ return err;
+
+ *val = err;
+
+ return 0;
+}
+
+
+static const struct regmap_config si476x_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 16,
+
+ .max_register = 0x4003,
+
+ .writeable_reg = si476x_core_regmap_writable_register,
+ .readable_reg = si476x_core_regmap_readable_register,
+
+ .reg_read = si476x_core_regmap_read,
+ .reg_write = si476x_core_regmap_write,
+
+ .cache_type = REGCACHE_RBTREE,
+};
+
+struct regmap *devm_regmap_init_si476x(struct si476x_core *core)
+{
+ return devm_regmap_init(&core->client->dev, NULL,
+ core, &si476x_regmap_config);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_init_si476x);
diff --git a/drivers/mfd/sta2x11-mfd.c b/drivers/mfd/sta2x11-mfd.c
index 9bd33169a11..d70a343078f 100644
--- a/drivers/mfd/sta2x11-mfd.c
+++ b/drivers/mfd/sta2x11-mfd.c
@@ -98,17 +98,6 @@ static int sta2x11_mfd_add(struct pci_dev *pdev, gfp_t flags)
return 0;
}
-static int mfd_remove(struct pci_dev *pdev)
-{
- struct sta2x11_mfd *mfd = sta2x11_mfd_find(pdev);
-
- if (!mfd)
- return -ENODEV;
- list_del(&mfd->list);
- kfree(mfd);
- return 0;
-}
-
/* This function is exported and is not expected to fail */
u32 __sta2x11_mfd_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val,
enum sta2x11_mfd_plat_dev index)
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index fd5fcb63068..0da02e11d58 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -75,6 +75,7 @@ static const struct i2c_device_id stmpe_i2c_id[] = {
{ "stmpe801", STMPE801 },
{ "stmpe811", STMPE811 },
{ "stmpe1601", STMPE1601 },
+ { "stmpe1801", STMPE1801 },
{ "stmpe2401", STMPE2401 },
{ "stmpe2403", STMPE2403 },
{ }
diff --git a/drivers/mfd/stmpe-spi.c b/drivers/mfd/stmpe-spi.c
index 973659f8abd..a81badbaa91 100644
--- a/drivers/mfd/stmpe-spi.c
+++ b/drivers/mfd/stmpe-spi.c
@@ -103,7 +103,7 @@ stmpe_spi_probe(struct spi_device *spi)
static int stmpe_spi_remove(struct spi_device *spi)
{
- struct stmpe *stmpe = dev_get_drvdata(&spi->dev);
+ struct stmpe *stmpe = spi_get_drvdata(spi);
return stmpe_remove(stmpe);
}
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 4b11202061b..bbccd514d3e 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -19,6 +19,7 @@
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/mfd/core.h>
+#include <linux/delay.h>
#include "stmpe.h"
static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
@@ -643,6 +644,88 @@ static struct stmpe_variant_info stmpe1601 = {
};
/*
+ * STMPE1801
+ */
+static const u8 stmpe1801_regs[] = {
+ [STMPE_IDX_CHIP_ID] = STMPE1801_REG_CHIP_ID,
+ [STMPE_IDX_ICR_LSB] = STMPE1801_REG_INT_CTRL_LOW,
+ [STMPE_IDX_IER_LSB] = STMPE1801_REG_INT_EN_MASK_LOW,
+ [STMPE_IDX_ISR_LSB] = STMPE1801_REG_INT_STA_LOW,
+ [STMPE_IDX_GPMR_LSB] = STMPE1801_REG_GPIO_MP_LOW,
+ [STMPE_IDX_GPSR_LSB] = STMPE1801_REG_GPIO_SET_LOW,
+ [STMPE_IDX_GPCR_LSB] = STMPE1801_REG_GPIO_CLR_LOW,
+ [STMPE_IDX_GPDR_LSB] = STMPE1801_REG_GPIO_SET_DIR_LOW,
+ [STMPE_IDX_GPRER_LSB] = STMPE1801_REG_GPIO_RE_LOW,
+ [STMPE_IDX_GPFER_LSB] = STMPE1801_REG_GPIO_FE_LOW,
+ [STMPE_IDX_IEGPIOR_LSB] = STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
+ [STMPE_IDX_ISGPIOR_LSB] = STMPE1801_REG_INT_STA_GPIO_LOW,
+};
+
+static struct stmpe_variant_block stmpe1801_blocks[] = {
+ {
+ .cell = &stmpe_gpio_cell,
+ .irq = STMPE1801_IRQ_GPIOC,
+ .block = STMPE_BLOCK_GPIO,
+ },
+ {
+ .cell = &stmpe_keypad_cell,
+ .irq = STMPE1801_IRQ_KEYPAD,
+ .block = STMPE_BLOCK_KEYPAD,
+ },
+};
+
+static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
+ bool enable)
+{
+ unsigned int mask = 0;
+ if (blocks & STMPE_BLOCK_GPIO)
+ mask |= STMPE1801_MSK_INT_EN_GPIO;
+
+ if (blocks & STMPE_BLOCK_KEYPAD)
+ mask |= STMPE1801_MSK_INT_EN_KPC;
+
+ return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask,
+ enable ? mask : 0);
+}
+
+static int stmpe1801_reset(struct stmpe *stmpe)
+{
+ unsigned long timeout;
+ int ret = 0;
+
+ ret = __stmpe_set_bits(stmpe, STMPE1801_REG_SYS_CTRL,
+ STMPE1801_MSK_SYS_CTRL_RESET, STMPE1801_MSK_SYS_CTRL_RESET);
+ if (ret < 0)
+ return ret;
+
+ timeout = jiffies + msecs_to_jiffies(100);
+ while (time_before(jiffies, timeout)) {
+ ret = __stmpe_reg_read(stmpe, STMPE1801_REG_SYS_CTRL);
+ if (ret < 0)
+ return ret;
+ if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
+ return 0;
+ usleep_range(100, 200);
+ };
+ return -EIO;
+}
+
+static struct stmpe_variant_info stmpe1801 = {
+ .name = "stmpe1801",
+ .id_val = STMPE1801_ID,
+ .id_mask = 0xfff0,
+ .num_gpios = 18,
+ .af_bits = 0,
+ .regs = stmpe1801_regs,
+ .blocks = stmpe1801_blocks,
+ .num_blocks = ARRAY_SIZE(stmpe1801_blocks),
+ .num_irqs = STMPE1801_NR_INTERNAL_IRQS,
+ .enable = stmpe1801_enable,
+ /* stmpe1801 do not have any gpio alternate function */
+ .get_altfunc = NULL,
+};
+
+/*
* STMPE24XX
*/
@@ -740,6 +823,7 @@ static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
[STMPE801] = &stmpe801,
[STMPE811] = &stmpe811,
[STMPE1601] = &stmpe1601,
+ [STMPE1801] = &stmpe1801,
[STMPE2401] = &stmpe2401,
[STMPE2403] = &stmpe2403,
};
@@ -759,7 +843,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
struct stmpe *stmpe = data;
struct stmpe_variant_info *variant = stmpe->variant;
int num = DIV_ROUND_UP(variant->num_irqs, 8);
- u8 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
+ u8 israddr;
u8 isr[num];
int ret;
int i;
@@ -771,6 +855,11 @@ static irqreturn_t stmpe_irq(int irq, void *data)
return IRQ_HANDLED;
}
+ if (variant->id_val == STMPE1801_ID)
+ israddr = stmpe->regs[STMPE_IDX_ISR_LSB];
+ else
+ israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
+
ret = stmpe_block_read(stmpe, israddr, num, isr);
if (ret < 0)
return IRQ_NONE;
@@ -938,6 +1027,12 @@ static int stmpe_chip_init(struct stmpe *stmpe)
if (ret)
return ret;
+ if (id == STMPE1801_ID) {
+ ret = stmpe1801_reset(stmpe);
+ if (ret < 0)
+ return ret;
+ }
+
if (stmpe->irq >= 0) {
if (id == STMPE801_ID)
icr = STMPE801_REG_SYS_CTRL_INT_EN;
@@ -1015,7 +1110,10 @@ void stmpe_of_probe(struct stmpe_platform_data *pdata, struct device_node *np)
{
struct device_node *child;
- pdata->id = -1;
+ pdata->id = of_alias_get_id(np, "stmpe-i2c");
+ if (pdata->id < 0)
+ pdata->id = -1;
+
pdata->irq_trigger = IRQF_TRIGGER_NONE;
of_property_read_u32(np, "st,autosleep-timeout",
@@ -1057,6 +1155,9 @@ int stmpe_probe(struct stmpe_client_info *ci, int partnum)
return -ENOMEM;
stmpe_of_probe(pdata, np);
+
+ if (of_find_property(np, "interrupts", NULL) == NULL)
+ ci->irq = -1;
}
stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 7b8e13f5b76..ff2b09ba879 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -199,6 +199,55 @@ int stmpe_remove(struct stmpe *stmpe);
#define STPME1601_AUTOSLEEP_ENABLE (1 << 3)
/*
+ * STMPE1801
+ */
+#define STMPE1801_ID 0xc110
+#define STMPE1801_NR_INTERNAL_IRQS 5
+#define STMPE1801_IRQ_KEYPAD_COMBI 4
+#define STMPE1801_IRQ_GPIOC 3
+#define STMPE1801_IRQ_KEYPAD_OVER 2
+#define STMPE1801_IRQ_KEYPAD 1
+#define STMPE1801_IRQ_WAKEUP 0
+
+#define STMPE1801_REG_CHIP_ID 0x00
+#define STMPE1801_REG_SYS_CTRL 0x02
+#define STMPE1801_REG_INT_CTRL_LOW 0x04
+#define STMPE1801_REG_INT_EN_MASK_LOW 0x06
+#define STMPE1801_REG_INT_STA_LOW 0x08
+#define STMPE1801_REG_INT_EN_GPIO_MASK_LOW 0x0A
+#define STMPE1801_REG_INT_EN_GPIO_MASK_MID 0x0B
+#define STMPE1801_REG_INT_EN_GPIO_MASK_HIGH 0x0C
+#define STMPE1801_REG_INT_STA_GPIO_LOW 0x0D
+#define STMPE1801_REG_INT_STA_GPIO_MID 0x0E
+#define STMPE1801_REG_INT_STA_GPIO_HIGH 0x0F
+#define STMPE1801_REG_GPIO_SET_LOW 0x10
+#define STMPE1801_REG_GPIO_SET_MID 0x11
+#define STMPE1801_REG_GPIO_SET_HIGH 0x12
+#define STMPE1801_REG_GPIO_CLR_LOW 0x13
+#define STMPE1801_REG_GPIO_CLR_MID 0x14
+#define STMPE1801_REG_GPIO_CLR_HIGH 0x15
+#define STMPE1801_REG_GPIO_MP_LOW 0x16
+#define STMPE1801_REG_GPIO_MP_MID 0x17
+#define STMPE1801_REG_GPIO_MP_HIGH 0x18
+#define STMPE1801_REG_GPIO_SET_DIR_LOW 0x19
+#define STMPE1801_REG_GPIO_SET_DIR_MID 0x1A
+#define STMPE1801_REG_GPIO_SET_DIR_HIGH 0x1B
+#define STMPE1801_REG_GPIO_RE_LOW 0x1C
+#define STMPE1801_REG_GPIO_RE_MID 0x1D
+#define STMPE1801_REG_GPIO_RE_HIGH 0x1E
+#define STMPE1801_REG_GPIO_FE_LOW 0x1F
+#define STMPE1801_REG_GPIO_FE_MID 0x20
+#define STMPE1801_REG_GPIO_FE_HIGH 0x21
+#define STMPE1801_REG_GPIO_PULL_UP_LOW 0x22
+#define STMPE1801_REG_GPIO_PULL_UP_MID 0x23
+#define STMPE1801_REG_GPIO_PULL_UP_HIGH 0x24
+
+#define STMPE1801_MSK_SYS_CTRL_RESET (1 << 7)
+
+#define STMPE1801_MSK_INT_EN_KPC (1 << 1)
+#define STMPE1801_MSK_INT_EN_GPIO (1 << 3)
+
+/*
* STMPE24xx
*/
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index 61aea6381cd..962a6e17a01 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -25,17 +25,15 @@
static struct platform_driver syscon_driver;
struct syscon {
- struct device *dev;
void __iomem *base;
struct regmap *regmap;
};
-static int syscon_match(struct device *dev, void *data)
+static int syscon_match_node(struct device *dev, void *data)
{
- struct syscon *syscon = dev_get_drvdata(dev);
struct device_node *dn = data;
- return (syscon->dev->of_node == dn) ? 1 : 0;
+ return (dev->of_node == dn) ? 1 : 0;
}
struct regmap *syscon_node_to_regmap(struct device_node *np)
@@ -44,7 +42,7 @@ struct regmap *syscon_node_to_regmap(struct device_node *np)
struct device *dev;
dev = driver_find_device(&syscon_driver.driver, NULL, np,
- syscon_match);
+ syscon_match_node);
if (!dev)
return ERR_PTR(-EPROBE_DEFER);
@@ -70,6 +68,34 @@ struct regmap *syscon_regmap_lookup_by_compatible(const char *s)
}
EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_compatible);
+static int syscon_match_pdevname(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ const struct platform_device_id *id = platform_get_device_id(pdev);
+
+ if (id)
+ if (!strcmp(id->name, (const char *)data))
+ return 1;
+
+ return !strcmp(dev_name(dev), (const char *)data);
+}
+
+struct regmap *syscon_regmap_lookup_by_pdevname(const char *s)
+{
+ struct device *dev;
+ struct syscon *syscon;
+
+ dev = driver_find_device(&syscon_driver.driver, NULL, (void *)s,
+ syscon_match_pdevname);
+ if (!dev)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ syscon = dev_get_drvdata(dev);
+
+ return syscon->regmap;
+}
+EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_pdevname);
+
struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np,
const char *property)
{
@@ -101,28 +127,22 @@ static struct regmap_config syscon_regmap_config = {
static int syscon_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
struct syscon *syscon;
- struct resource res;
- int ret;
-
- if (!np)
- return -ENOENT;
+ struct resource *res;
- syscon = devm_kzalloc(dev, sizeof(struct syscon),
- GFP_KERNEL);
+ syscon = devm_kzalloc(dev, sizeof(*syscon), GFP_KERNEL);
if (!syscon)
return -ENOMEM;
- syscon->base = of_iomap(np, 0);
- if (!syscon->base)
- return -EADDRNOTAVAIL;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENOENT;
- ret = of_address_to_resource(np, 0, &res);
- if (ret)
- return ret;
+ syscon->base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!syscon->base)
+ return -ENOMEM;
- syscon_regmap_config.max_register = res.end - res.start - 3;
+ syscon_regmap_config.max_register = res->end - res->start - 3;
syscon->regmap = devm_regmap_init_mmio(dev, syscon->base,
&syscon_regmap_config);
if (IS_ERR(syscon->regmap)) {
@@ -130,25 +150,17 @@ static int syscon_probe(struct platform_device *pdev)
return PTR_ERR(syscon->regmap);
}
- syscon->dev = dev;
platform_set_drvdata(pdev, syscon);
- dev_info(dev, "syscon regmap start 0x%x end 0x%x registered\n",
- res.start, res.end);
+ dev_info(dev, "regmap %pR registered\n", res);
return 0;
}
-static int syscon_remove(struct platform_device *pdev)
-{
- struct syscon *syscon;
-
- syscon = platform_get_drvdata(pdev);
- iounmap(syscon->base);
- platform_set_drvdata(pdev, NULL);
-
- return 0;
-}
+static const struct platform_device_id syscon_ids[] = {
+ { "syscon", },
+ { }
+};
static struct platform_driver syscon_driver = {
.driver = {
@@ -157,7 +169,7 @@ static struct platform_driver syscon_driver = {
.of_match_table = of_syscon_match,
},
.probe = syscon_probe,
- .remove = syscon_remove,
+ .id_table = syscon_ids,
};
static int __init syscon_init(void)
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index ecc092c7f74..4cb92bb2aea 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -350,7 +350,8 @@ static int tc3589x_probe(struct i2c_client *i2c,
| I2C_FUNC_SMBUS_I2C_BLOCK))
return -EIO;
- tc3589x = kzalloc(sizeof(struct tc3589x), GFP_KERNEL);
+ tc3589x = devm_kzalloc(&i2c->dev, sizeof(struct tc3589x),
+ GFP_KERNEL);
if (!tc3589x)
return -ENOMEM;
@@ -366,33 +367,27 @@ static int tc3589x_probe(struct i2c_client *i2c,
ret = tc3589x_chip_init(tc3589x);
if (ret)
- goto out_free;
+ return ret;
ret = tc3589x_irq_init(tc3589x, np);
if (ret)
- goto out_free;
+ return ret;
ret = request_threaded_irq(tc3589x->i2c->irq, NULL, tc3589x_irq,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"tc3589x", tc3589x);
if (ret) {
dev_err(tc3589x->dev, "failed to request IRQ: %d\n", ret);
- goto out_free;
+ return ret;
}
ret = tc3589x_device_init(tc3589x);
if (ret) {
dev_err(tc3589x->dev, "failed to add child devices\n");
- goto out_freeirq;
+ return ret;
}
return 0;
-
-out_freeirq:
- free_irq(tc3589x->i2c->irq, tc3589x);
-out_free:
- kfree(tc3589x);
- return ret;
}
static int tc3589x_remove(struct i2c_client *client)
@@ -401,10 +396,6 @@ static int tc3589x_remove(struct i2c_client *client)
mfd_remove_devices(tc3589x->dev);
- free_irq(tc3589x->i2c->irq, tc3589x);
-
- kfree(tc3589x);
-
return 0;
}
diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c
index 98edb5be85c..fbd6ee67b5a 100644
--- a/drivers/mfd/tps65090.c
+++ b/drivers/mfd/tps65090.c
@@ -56,12 +56,23 @@
#define TPS65090_INT2_MASK_OVERLOAD_FET6 6
#define TPS65090_INT2_MASK_OVERLOAD_FET7 7
+static struct resource charger_resources[] = {
+ {
+ .start = TPS65090_IRQ_VAC_STATUS_CHANGE,
+ .end = TPS65090_IRQ_VAC_STATUS_CHANGE,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
static struct mfd_cell tps65090s[] = {
{
.name = "tps65090-pmic",
},
{
.name = "tps65090-charger",
+ .num_resources = ARRAY_SIZE(charger_resources),
+ .resources = &charger_resources[0],
+ .of_compatible = "ti,tps65090-charger",
},
};
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index 942b666a2a0..42bd3ea5df3 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -211,12 +211,14 @@ static int twl4030battery_current(int raw_volt)
* @reg_base - Base address of the first channel
* @Channels - 16 bit bitmap. If the bit is set, channel value is read
* @buf - The channel values are stored here. if read fails error
+ * @raw - Return raw values without conversion
* value is stored
* Returns the number of successfully read channels.
*/
static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
u8 reg_base, unsigned
- long channels, int *buf)
+ long channels, int *buf,
+ bool raw)
{
int count = 0, count_req = 0, i;
u8 reg;
@@ -230,6 +232,10 @@ static int twl4030_madc_read_channels(struct twl4030_madc_data *madc,
count_req++;
continue;
}
+ if (raw) {
+ count++;
+ continue;
+ }
switch (i) {
case 10:
buf[i] = twl4030battery_current(buf[i]);
@@ -371,7 +377,7 @@ static irqreturn_t twl4030_madc_threaded_irq_handler(int irq, void *_madc)
method = &twl4030_conversion_methods[r->method];
/* Read results */
len = twl4030_madc_read_channels(madc, method->rbase,
- r->channels, r->rbuf);
+ r->channels, r->rbuf, r->raw);
/* Return results to caller */
if (r->func_cb != NULL) {
r->func_cb(len, r->channels, r->rbuf);
@@ -397,7 +403,7 @@ err_i2c:
method = &twl4030_conversion_methods[r->method];
/* Read results */
len = twl4030_madc_read_channels(madc, method->rbase,
- r->channels, r->rbuf);
+ r->channels, r->rbuf, r->raw);
/* Return results to caller */
if (r->func_cb != NULL) {
r->func_cb(len, r->channels, r->rbuf);
@@ -585,7 +591,7 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req)
goto out;
}
ret = twl4030_madc_read_channels(twl4030_madc, method->rbase,
- req->channels, req->rbuf);
+ req->channels, req->rbuf, req->raw);
twl4030_madc->requests[req->method].active = 0;
out:
diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
index f361bf38a0a..492ee2cd340 100644
--- a/drivers/mfd/twl6040.c
+++ b/drivers/mfd/twl6040.c
@@ -554,7 +554,7 @@ static int twl6040_probe(struct i2c_client *client,
twl6040->supplies[0].supply = "vio";
twl6040->supplies[1].supply = "v2v1";
- ret = regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
+ ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
twl6040->supplies);
if (ret != 0) {
dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
@@ -564,7 +564,7 @@ static int twl6040_probe(struct i2c_client *client,
ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
if (ret != 0) {
dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
- goto power_err;
+ goto regulator_get_err;
}
twl6040->dev = &client->dev;
@@ -586,8 +586,8 @@ static int twl6040_probe(struct i2c_client *client,
twl6040->audpwron = -EINVAL;
if (gpio_is_valid(twl6040->audpwron)) {
- ret = gpio_request_one(twl6040->audpwron, GPIOF_OUT_INIT_LOW,
- "audpwron");
+ ret = devm_gpio_request_one(&client->dev, twl6040->audpwron,
+ GPIOF_OUT_INIT_LOW, "audpwron");
if (ret)
goto gpio_err;
}
@@ -596,14 +596,14 @@ static int twl6040_probe(struct i2c_client *client,
IRQF_ONESHOT, 0, &twl6040_irq_chip,
&twl6040->irq_data);
if (ret < 0)
- goto irq_init_err;
+ goto gpio_err;
twl6040->irq_ready = regmap_irq_get_virq(twl6040->irq_data,
TWL6040_IRQ_READY);
twl6040->irq_th = regmap_irq_get_virq(twl6040->irq_data,
TWL6040_IRQ_TH);
- ret = request_threaded_irq(twl6040->irq_ready, NULL,
+ ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_ready, NULL,
twl6040_readyint_handler, IRQF_ONESHOT,
"twl6040_irq_ready", twl6040);
if (ret) {
@@ -611,7 +611,7 @@ static int twl6040_probe(struct i2c_client *client,
goto readyirq_err;
}
- ret = request_threaded_irq(twl6040->irq_th, NULL,
+ ret = devm_request_threaded_irq(twl6040->dev, twl6040->irq_th, NULL,
twl6040_thint_handler, IRQF_ONESHOT,
"twl6040_irq_th", twl6040);
if (ret) {
@@ -681,18 +681,13 @@ static int twl6040_probe(struct i2c_client *client,
return 0;
mfd_err:
- free_irq(twl6040->irq_th, twl6040);
+ devm_free_irq(&client->dev, twl6040->irq_th, twl6040);
thirq_err:
- free_irq(twl6040->irq_ready, twl6040);
+ devm_free_irq(&client->dev, twl6040->irq_ready, twl6040);
readyirq_err:
regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
-irq_init_err:
- if (gpio_is_valid(twl6040->audpwron))
- gpio_free(twl6040->audpwron);
gpio_err:
regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
-power_err:
- regulator_bulk_free(TWL6040_NUM_SUPPLIES, twl6040->supplies);
regulator_get_err:
i2c_set_clientdata(client, NULL);
err:
@@ -706,18 +701,14 @@ static int twl6040_remove(struct i2c_client *client)
if (twl6040->power_count)
twl6040_power(twl6040, 0);
- if (gpio_is_valid(twl6040->audpwron))
- gpio_free(twl6040->audpwron);
-
- free_irq(twl6040->irq_ready, twl6040);
- free_irq(twl6040->irq_th, twl6040);
+ devm_free_irq(&client->dev, twl6040->irq_ready, twl6040);
+ devm_free_irq(&client->dev, twl6040->irq_th, twl6040);
regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
mfd_remove_devices(&client->dev);
i2c_set_clientdata(client, NULL);
regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
- regulator_bulk_free(TWL6040_NUM_SUPPLIES, twl6040->supplies);
return 0;
}
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
index daf69527ed8..e9031fa9d53 100644
--- a/drivers/mfd/ucb1400_core.c
+++ b/drivers/mfd/ucb1400_core.c
@@ -75,6 +75,11 @@ static int ucb1400_core_probe(struct device *dev)
/* GPIO */
ucb_gpio.ac97 = ac97;
+ if (pdata) {
+ ucb_gpio.gpio_setup = pdata->gpio_setup;
+ ucb_gpio.gpio_teardown = pdata->gpio_teardown;
+ ucb_gpio.gpio_offset = pdata->gpio_offset;
+ }
ucb->ucb1400_gpio = platform_device_alloc("ucb1400_gpio", -1);
if (!ucb->ucb1400_gpio) {
err = -ENOMEM;
diff --git a/drivers/mfd/vexpress-config.c b/drivers/mfd/vexpress-config.c
index 3c1723aa622..84ce6b9daa3 100644
--- a/drivers/mfd/vexpress-config.c
+++ b/drivers/mfd/vexpress-config.c
@@ -184,13 +184,14 @@ static int vexpress_config_schedule(struct vexpress_config_trans *trans)
spin_lock_irqsave(&bridge->transactions_lock, flags);
- vexpress_config_dump_trans("Executing", trans);
-
- if (list_empty(&bridge->transactions))
+ if (list_empty(&bridge->transactions)) {
+ vexpress_config_dump_trans("Executing", trans);
status = bridge->info->func_exec(trans->func->func,
trans->offset, trans->write, trans->data);
- else
+ } else {
+ vexpress_config_dump_trans("Queuing", trans);
status = VEXPRESS_CONFIG_STATUS_WAIT;
+ }
switch (status) {
case VEXPRESS_CONFIG_STATUS_DONE:
@@ -212,25 +213,31 @@ void vexpress_config_complete(struct vexpress_config_bridge *bridge,
{
struct vexpress_config_trans *trans;
unsigned long flags;
+ const char *message = "Completed";
spin_lock_irqsave(&bridge->transactions_lock, flags);
trans = list_first_entry(&bridge->transactions,
struct vexpress_config_trans, list);
- vexpress_config_dump_trans("Completed", trans);
-
trans->status = status;
- list_del(&trans->list);
- if (!list_empty(&bridge->transactions)) {
- vexpress_config_dump_trans("Pending", trans);
+ do {
+ vexpress_config_dump_trans(message, trans);
+ list_del(&trans->list);
+ complete(&trans->completion);
- bridge->info->func_exec(trans->func->func, trans->offset,
- trans->write, trans->data);
- }
- spin_unlock_irqrestore(&bridge->transactions_lock, flags);
+ if (list_empty(&bridge->transactions))
+ break;
+
+ trans = list_first_entry(&bridge->transactions,
+ struct vexpress_config_trans, list);
+ vexpress_config_dump_trans("Executing pending", trans);
+ trans->status = bridge->info->func_exec(trans->func->func,
+ trans->offset, trans->write, trans->data);
+ message = "Finished pending";
+ } while (trans->status == VEXPRESS_CONFIG_STATUS_DONE);
- complete(&trans->completion);
+ spin_unlock_irqrestore(&bridge->transactions_lock, flags);
}
EXPORT_SYMBOL(vexpress_config_complete);
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
index bf75e967a1f..96a020b1dcd 100644
--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -490,12 +490,12 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
return err;
}
+ vexpress_sysreg_dev = &pdev->dev;
+
platform_device_register_data(vexpress_sysreg_dev, "leds-gpio",
PLATFORM_DEVID_AUTO, &vexpress_sysreg_leds_pdata,
sizeof(vexpress_sysreg_leds_pdata));
- vexpress_sysreg_dev = &pdev->dev;
-
device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id);
return 0;
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index f70c4956ff9..155c4a1a6a9 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/device.h>
#include <linux/module.h>
#include <linux/mfd/arizona/core.h>
@@ -57,31 +58,54 @@ static const struct reg_default wm5102_reva_patch[] = {
};
static const struct reg_default wm5102_revb_patch[] = {
+ { 0x19, 0x0001 },
{ 0x80, 0x0003 },
{ 0x081, 0xE022 },
- { 0x410, 0x4080 },
- { 0x418, 0x4080 },
- { 0x420, 0x4080 },
- { 0x428, 0xC000 },
+ { 0x410, 0x6080 },
+ { 0x418, 0xa080 },
+ { 0x420, 0xa080 },
+ { 0x428, 0xe000 },
+ { 0x443, 0xDC1A },
{ 0x4B0, 0x0066 },
{ 0x458, 0x000b },
{ 0x212, 0x0000 },
+ { 0x171, 0x0000 },
+ { 0x35E, 0x000C },
+ { 0x2D4, 0x0000 },
{ 0x80, 0x0000 },
};
/* We use a function so we can use ARRAY_SIZE() */
int wm5102_patch(struct arizona *arizona)
{
+ const struct reg_default *wm5102_patch;
+ int ret = 0;
+ int i, patch_size;
+
switch (arizona->rev) {
case 0:
- return regmap_register_patch(arizona->regmap,
- wm5102_reva_patch,
- ARRAY_SIZE(wm5102_reva_patch));
+ wm5102_patch = wm5102_reva_patch;
+ patch_size = ARRAY_SIZE(wm5102_reva_patch);
default:
- return regmap_register_patch(arizona->regmap,
- wm5102_revb_patch,
- ARRAY_SIZE(wm5102_revb_patch));
+ wm5102_patch = wm5102_revb_patch;
+ patch_size = ARRAY_SIZE(wm5102_revb_patch);
+ }
+
+ regcache_cache_bypass(arizona->regmap, true);
+
+ for (i = 0; i < patch_size; i++) {
+ ret = regmap_write(arizona->regmap, wm5102_patch[i].reg,
+ wm5102_patch[i].def);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to write %x = %x: %d\n",
+ wm5102_patch[i].reg, wm5102_patch[i].def, ret);
+ goto out;
+ }
}
+
+out:
+ regcache_cache_bypass(arizona->regmap, false);
+ return ret;
}
static const struct regmap_irq wm5102_aod_irqs[ARIZONA_NUM_IRQ] = {
@@ -282,7 +306,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000155, 0x0000 }, /* R341 - Rate Estimator 4 */
{ 0x00000156, 0x0000 }, /* R342 - Rate Estimator 5 */
{ 0x00000161, 0x0000 }, /* R353 - Dynamic Frequency Scaling 1 */
- { 0x00000171, 0x0002 }, /* R369 - FLL1 Control 1 */
+ { 0x00000171, 0x0000 }, /* R369 - FLL1 Control 1 */
{ 0x00000172, 0x0008 }, /* R370 - FLL1 Control 2 */
{ 0x00000173, 0x0018 }, /* R371 - FLL1 Control 3 */
{ 0x00000174, 0x007D }, /* R372 - FLL1 Control 4 */
@@ -366,7 +390,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000400, 0x0000 }, /* R1024 - Output Enables 1 */
{ 0x00000408, 0x0000 }, /* R1032 - Output Rate 1 */
{ 0x00000409, 0x0022 }, /* R1033 - Output Volume Ramp */
- { 0x00000410, 0x4080 }, /* R1040 - Output Path Config 1L */
+ { 0x00000410, 0x6080 }, /* R1040 - Output Path Config 1L */
{ 0x00000411, 0x0180 }, /* R1041 - DAC Digital Volume 1L */
{ 0x00000412, 0x0081 }, /* R1042 - DAC Volume Limit 1L */
{ 0x00000413, 0x0001 }, /* R1043 - Noise Gate Select 1L */
@@ -374,7 +398,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000415, 0x0180 }, /* R1045 - DAC Digital Volume 1R */
{ 0x00000416, 0x0081 }, /* R1046 - DAC Volume Limit 1R */
{ 0x00000417, 0x0002 }, /* R1047 - Noise Gate Select 1R */
- { 0x00000418, 0x4080 }, /* R1048 - Output Path Config 2L */
+ { 0x00000418, 0xA080 }, /* R1048 - Output Path Config 2L */
{ 0x00000419, 0x0180 }, /* R1049 - DAC Digital Volume 2L */
{ 0x0000041A, 0x0081 }, /* R1050 - DAC Volume Limit 2L */
{ 0x0000041B, 0x0004 }, /* R1051 - Noise Gate Select 2L */
@@ -382,11 +406,11 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x0000041D, 0x0180 }, /* R1053 - DAC Digital Volume 2R */
{ 0x0000041E, 0x0081 }, /* R1054 - DAC Volume Limit 2R */
{ 0x0000041F, 0x0008 }, /* R1055 - Noise Gate Select 2R */
- { 0x00000420, 0x4080 }, /* R1056 - Output Path Config 3L */
+ { 0x00000420, 0xA080 }, /* R1056 - Output Path Config 3L */
{ 0x00000421, 0x0180 }, /* R1057 - DAC Digital Volume 3L */
{ 0x00000422, 0x0081 }, /* R1058 - DAC Volume Limit 3L */
{ 0x00000423, 0x0010 }, /* R1059 - Noise Gate Select 3L */
- { 0x00000428, 0xC000 }, /* R1064 - Output Path Config 4L */
+ { 0x00000428, 0xE000 }, /* R1064 - Output Path Config 4L */
{ 0x00000429, 0x0180 }, /* R1065 - DAC Digital Volume 4L */
{ 0x0000042A, 0x0081 }, /* R1066 - Out Volume 4L */
{ 0x0000042B, 0x0040 }, /* R1067 - Noise Gate Select 4L */
@@ -401,7 +425,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000436, 0x0081 }, /* R1078 - DAC Volume Limit 5R */
{ 0x00000437, 0x0200 }, /* R1079 - Noise Gate Select 5R */
{ 0x00000450, 0x0000 }, /* R1104 - DAC AEC Control 1 */
- { 0x00000458, 0x0001 }, /* R1112 - Noise Gate Control */
+ { 0x00000458, 0x000B }, /* R1112 - Noise Gate Control */
{ 0x00000490, 0x0069 }, /* R1168 - PDM SPK1 CTRL 1 */
{ 0x00000491, 0x0000 }, /* R1169 - PDM SPK1 CTRL 2 */
{ 0x00000500, 0x000C }, /* R1280 - AIF1 BCLK Ctrl */
diff --git a/drivers/mfd/wm831x-spi.c b/drivers/mfd/wm831x-spi.c
index 4e70e157a90..e7ed14f661d 100644
--- a/drivers/mfd/wm831x-spi.c
+++ b/drivers/mfd/wm831x-spi.c
@@ -37,7 +37,7 @@ static int wm831x_spi_probe(struct spi_device *spi)
spi->bits_per_word = 16;
spi->mode = SPI_MODE_0;
- dev_set_drvdata(&spi->dev, wm831x);
+ spi_set_drvdata(spi, wm831x);
wm831x->dev = &spi->dev;
wm831x->regmap = devm_regmap_init_spi(spi, &wm831x_regmap_config);
@@ -53,7 +53,7 @@ static int wm831x_spi_probe(struct spi_device *spi)
static int wm831x_spi_remove(struct spi_device *spi)
{
- struct wm831x *wm831x = dev_get_drvdata(&spi->dev);
+ struct wm831x *wm831x = spi_get_drvdata(spi);
wm831x_device_exit(wm831x);
@@ -69,7 +69,7 @@ static int wm831x_spi_suspend(struct device *dev)
static void wm831x_spi_shutdown(struct spi_device *spi)
{
- struct wm831x *wm831x = dev_get_drvdata(&spi->dev);
+ struct wm831x *wm831x = spi_get_drvdata(spi);
wm831x_device_shutdown(wm831x);
}
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 803e93fae56..00e4fe2f3c7 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -19,6 +19,9 @@
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/mfd/core.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
@@ -191,7 +194,7 @@ static const char *wm8958_main_supplies[] = {
"SPKVDD2",
};
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_RUNTIME
static int wm8994_suspend(struct device *dev)
{
struct wm8994 *wm8994 = dev_get_drvdata(dev);
@@ -396,6 +399,60 @@ static const struct reg_default wm1811_reva_patch[] = {
{ 0x102, 0x0 },
};
+#ifdef CONFIG_OF
+static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
+{
+ struct device_node *np = wm8994->dev->of_node;
+ struct wm8994_pdata *pdata = &wm8994->pdata;
+ int i;
+
+ if (!np)
+ return 0;
+
+ if (of_property_read_u32_array(np, "wlf,gpio-cfg", pdata->gpio_defaults,
+ ARRAY_SIZE(pdata->gpio_defaults)) >= 0) {
+ for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
+ if (wm8994->pdata.gpio_defaults[i] == 0)
+ pdata->gpio_defaults[i]
+ = WM8994_CONFIGURE_GPIO;
+ }
+ }
+
+ of_property_read_u32_array(np, "wlf,micbias-cfg", pdata->micbias,
+ ARRAY_SIZE(pdata->micbias));
+
+ pdata->lineout1_diff = true;
+ pdata->lineout2_diff = true;
+ if (of_find_property(np, "wlf,lineout1-se", NULL))
+ pdata->lineout1_diff = false;
+ if (of_find_property(np, "wlf,lineout2-se", NULL))
+ pdata->lineout2_diff = false;
+
+ if (of_find_property(np, "wlf,lineout1-feedback", NULL))
+ pdata->lineout1fb = true;
+ if (of_find_property(np, "wlf,lineout2-feedback", NULL))
+ pdata->lineout2fb = true;
+
+ if (of_find_property(np, "wlf,ldoena-always-driven", NULL))
+ pdata->lineout2fb = true;
+
+ pdata->ldo[0].enable = of_get_named_gpio(np, "wlf,ldo1ena", 0);
+ if (pdata->ldo[0].enable < 0)
+ pdata->ldo[0].enable = 0;
+
+ pdata->ldo[1].enable = of_get_named_gpio(np, "wlf,ldo2ena", 0);
+ if (pdata->ldo[1].enable < 0)
+ pdata->ldo[1].enable = 0;
+
+ return 0;
+}
+#else
+static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
+{
+ return 0;
+}
+#endif
+
/*
* Instantiate the generic non-control parts of the device.
*/
@@ -405,7 +462,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
struct regmap_config *regmap_config;
const struct reg_default *regmap_patch = NULL;
const char *devname;
- int ret, i, patch_regs;
+ int ret, i, patch_regs = 0;
int pulls = 0;
if (dev_get_platdata(wm8994->dev)) {
@@ -414,6 +471,10 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
}
pdata = &wm8994->pdata;
+ ret = wm8994_set_pdata_from_of(wm8994);
+ if (ret != 0)
+ return ret;
+
dev_set_drvdata(wm8994->dev, wm8994);
/* Add the on-chip regulators first for bootstrapping */
@@ -673,9 +734,9 @@ static void wm8994_device_exit(struct wm8994 *wm8994)
}
static const struct of_device_id wm8994_of_match[] = {
- { .compatible = "wlf,wm1811", },
- { .compatible = "wlf,wm8994", },
- { .compatible = "wlf,wm8958", },
+ { .compatible = "wlf,wm1811", .data = (void *)WM1811 },
+ { .compatible = "wlf,wm8994", .data = (void *)WM8994 },
+ { .compatible = "wlf,wm8958", .data = (void *)WM8958 },
{ }
};
MODULE_DEVICE_TABLE(of, wm8994_of_match);
@@ -683,6 +744,7 @@ MODULE_DEVICE_TABLE(of, wm8994_of_match);
static int wm8994_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
+ const struct of_device_id *of_id;
struct wm8994 *wm8994;
int ret;
@@ -693,7 +755,14 @@ static int wm8994_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, wm8994);
wm8994->dev = &i2c->dev;
wm8994->irq = i2c->irq;
- wm8994->type = id->driver_data;
+
+ if (i2c->dev.of_node) {
+ of_id = of_match_device(wm8994_of_match, &i2c->dev);
+ if (of_id)
+ wm8994->type = (int)of_id->data;
+ } else {
+ wm8994->type = id->driver_data;
+ }
wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config);
if (IS_ERR(wm8994->regmap)) {
@@ -724,15 +793,16 @@ static const struct i2c_device_id wm8994_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);
-static UNIVERSAL_DEV_PM_OPS(wm8994_pm_ops, wm8994_suspend, wm8994_resume,
- NULL);
+static const struct dev_pm_ops wm8994_pm_ops = {
+ SET_RUNTIME_PM_OPS(wm8994_suspend, wm8994_resume, NULL)
+};
static struct i2c_driver wm8994_i2c_driver = {
.driver = {
.name = "wm8994",
.owner = THIS_MODULE,
.pm = &wm8994_pm_ops,
- .of_match_table = wm8994_of_match,
+ .of_match_table = of_match_ptr(wm8994_of_match),
},
.probe = wm8994_i2c_probe,
.remove = wm8994_i2c_remove,
diff --git a/drivers/power/rx51_battery.c b/drivers/power/rx51_battery.c
index 1a1dcb831a1..cbde1d6d322 100644
--- a/drivers/power/rx51_battery.c
+++ b/drivers/power/rx51_battery.c
@@ -42,6 +42,7 @@ static int rx51_battery_read_adc(int channel)
req.method = TWL4030_MADC_SW1;
req.func_cb = NULL;
req.type = TWL4030_MADC_WAIT;
+ req.raw = true;
if (twl4030_madc_conversion(&req) <= 0)
return -ENODATA;