Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (115 commits) EHCI: fix direction handling for interrupt data toggles USB: serial: add IDs for WinChipHead USB->RS232 adapter USB: OHCI: fix another regression for NVIDIA controllers usb: gadget: m66592-udc: add pullup function usb: gadget: m66592-udc: add function for external controller usb: gadget: r8a66597-udc: add pullup function usb: renesas_usbhs: support multi driver usb: renesas_usbhs: inaccessible pipe is not an error usb: renesas_usbhs: care buff alignment when dma handler USB: PL2303: correctly handle baudrates above 115200 usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift usb: renesas_usbhs: compile/config are rescued usb: renesas_usbhs: fixup comment-out usb: update email address in ohci-sh and r8a66597-hcd usb: r8a66597-hcd: add function for external controller EHCI: only power off port if over-current is active USB: mon: Allow to use usbmon without debugfs USB: EHCI: go back to using the system clock for QH unlinks ehci: add pci quirk for Ordissimo and RM Slate 100 too ehci: refactor pci quirk to use standard dmi_check_system method ... Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
author: Linus Torvalds <torvalds@linux-foundation.org> 2011-07-25 23:08:32 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2011-07-25 23:08:32 -0700
commit: f549953c15deab4c54708b39af86d4edecc6cddc (patch)
tree: f0412f989b77cdceab34c18aa85a8a25d5942a1f /drivers
parent: f0deb97ab13ad1f89cd0993f7339655d59788405 (diff)
parent: e04f5f7e423018bcec84c11af2058cdce87816f3 (diff)
124 files changed, 8928 insertions, 3124 deletions
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index e71521ce301..428f36801e0 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -116,14 +116,14 @@ struct uea_cmvs_v1 {
 	u32 address;
 	u16 offset;
 	u32 data;
-} __attribute__ ((packed));
+} __packed;
 
 struct uea_cmvs_v2 {
 	u32 group;
 	u32 address;
 	u32 offset;
 	u32 data;
-} __attribute__ ((packed));
+} __packed;
 
 /* information about currently processed cmv */
 struct cmv_dsc_e1 {
@@ -352,7 +352,7 @@ struct block_index {
 	__le32 PageAddress;
 	__le16 dummy1;
 	__le16 PageNumber;
-} __attribute__ ((packed));
+} __packed;
 
 #define E4_IS_BOOT_PAGE(PageSize) ((le32_to_cpu(PageSize)) & 0x80000000)
 #define E4_PAGE_BYTES(PageSize) ((le32_to_cpu(PageSize) & 0x7fffffff) * 4)
@@ -367,7 +367,7 @@ struct l1_code {
 	u8 page_number_to_block_index[E4_MAX_PAGE_NUMBER];
 	struct block_index page_header[E4_NO_SWAPPAGE_HEADERS];
 	u8 code[0];
-} __attribute__ ((packed));
+} __packed;
 
 /* structures describing a block within a DSP page */
 struct block_info_e1 {
@@ -377,7 +377,7 @@ struct block_info_e1 {
 	__le16 wOvlOffset;
 	__le16 wOvl;		/* overlay */
 	__le16 wLast;
-} __attribute__ ((packed));
+} __packed;
 #define E1_BLOCK_INFO_SIZE 12
 
 struct block_info_e4 {
@@ -387,7 +387,7 @@ struct block_info_e4 {
 	__be32 dwSize;
 	__be32 dwAddress;
 	__be16 wReserved;
-} __attribute__ ((packed));
+} __packed;
 #define E4_BLOCK_INFO_SIZE 14
 
 #define UEA_BIHDR 0xabcd
@@ -467,7 +467,7 @@ struct cmv_e1 {
 	__le32 dwSymbolicAddress;
 	__le16 wOffsetAddress;
 	__le32 dwData;
-} __attribute__ ((packed));
+} __packed;
 
 struct cmv_e4 {
 	__be16 wGroup;
@@ -475,17 +475,17 @@ struct cmv_e4 {
 	__be16 wOffset;
 	__be16 wAddress;
 	__be32 dwData[6];
-} __attribute__ ((packed));
+} __packed;
 
 /* structures representing swap information */
 struct swap_info_e1 {
 	__u8 bSwapPageNo;
 	__u8 bOvl;		/* overlay */
-} __attribute__ ((packed));
+} __packed;
 
 struct swap_info_e4 {
 	__u8 bSwapPageNo;
-} __attribute__ ((packed));
+} __packed;
 
 /* structures representing interrupt data */
 #define e1_bSwapPageNo	u.e1.s1.swapinfo.bSwapPageNo
@@ -499,23 +499,23 @@ union intr_data_e1 {
 	struct {
 		struct swap_info_e1 swapinfo;
 		__le16 wDataSize;
-	} __attribute__ ((packed)) s1;
+	} __packed s1;
 	struct {
 		struct cmv_e1 cmv;
 		__le16 wDataSize;
-	} __attribute__ ((packed)) s2;
-} __attribute__ ((packed));
+	} __packed s2;
+} __packed;
 
 union intr_data_e4 {
 	struct {
 		struct swap_info_e4 swapinfo;
 		__le16 wDataSize;
-	} __attribute__ ((packed)) s1;
+	} __packed s1;
 	struct {
 		struct cmv_e4 cmv;
 		__le16 wDataSize;
-	} __attribute__ ((packed)) s2;
-} __attribute__ ((packed));
+	} __packed s2;
+} __packed;
 
 struct intr_pkt {
 	__u8 bType;
@@ -528,15 +528,15 @@ struct intr_pkt {
 		union intr_data_e1 e1;
 		union intr_data_e4 e4;
 	} u;
-} __attribute__ ((packed));
+} __packed;
 
 #define E1_INTR_PKT_SIZE 28
 #define E4_INTR_PKT_SIZE 64
 
 static struct usb_driver uea_driver;
 static DEFINE_MUTEX(uea_mutex);
-static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III",
-								"Eagle IV"};
+static const char * const chip_name[] = {
+	"ADI930", "Eagle I", "Eagle II", "Eagle III", "Eagle IV"};
 
 static int modem_index;
 static unsigned int debug;
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 989e16e4ab5..d3448ca110c 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -81,6 +81,7 @@
 #include <linux/timer.h>
 #include <linux/wait.h>
 #include <linux/kthread.h>
+#include <linux/ratelimit.h>
 
 #ifdef VERBOSE_DEBUG
 static int usbatm_print_packet(const unsigned char *data, int len);
@@ -668,8 +669,7 @@ static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb)
 	/* racy disconnection check - fine */
 	if (!instance || instance->disconnected) {
 #ifdef DEBUG
-		if (printk_ratelimit())
-			printk(KERN_DEBUG "%s: %s!\n", __func__, instance ? "disconnected" : "NULL instance");
+		printk_ratelimited(KERN_DEBUG "%s: %s!\n", __func__, instance ? "disconnected" : "NULL instance");
 #endif
 		err = -ENODEV;
 		goto fail;
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 9eca4053312..cb3a93243a0 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -58,6 +58,7 @@
 #include <linux/mutex.h>
 #undef DEBUG
 #include <linux/usb.h>
+#include <linux/ratelimit.h>
 
 /*
  * Version Information
@@ -348,8 +349,7 @@ static int usblp_check_status(struct usblp *usblp, int err)
 	mutex_lock(&usblp->mut);
 	if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) {
 		mutex_unlock(&usblp->mut);
-		if (printk_ratelimit())
-			printk(KERN_ERR
+		printk_ratelimited(KERN_ERR
 				"usblp%d: error %d reading printer status\n",
 				usblp->minor, error);
 		return 0;
@@ -653,8 +653,7 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 		case LPGETSTATUS:
 			if ((retval = usblp_read_status(usblp, usblp->statusbuf))) {
-				if (printk_ratelimit())
-					printk(KERN_ERR "usblp%d:"
+				printk_ratelimited(KERN_ERR "usblp%d:"
 					    "failed reading printer status (%d)\n",
 					    usblp->minor, retval);
 				retval = -EIO;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index ace9f8442e5..8669ba3fe79 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -337,6 +337,17 @@ static const u8 ss_rh_config_descriptor[] = {
 	0x02, 0x00   /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
 };
 
+/* authorized_default behaviour:
+ * -1 is authorized for all devices except wireless (old behaviour)
+ * 0 is unauthorized for all devices
+ * 1 is authorized for all devices
+ */
+static int authorized_default = -1;
+module_param(authorized_default, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(authorized_default,
+		"Default USB device authorization: 0 is not authorized, 1 is "
+		"authorized, -1 is authorized except for wireless USB (default, "
+		"old behaviour");
 /*-------------------------------------------------------------------------*/
 
 /**
@@ -2371,7 +2382,11 @@ int usb_add_hcd(struct usb_hcd *hcd,
 
 	dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
 
-	hcd->authorized_default = hcd->wireless? 0 : 1;
+	/* Keep old behaviour if authorized_default is not in [0, 1]. */
+	if (authorized_default < 0 || authorized_default > 1)
+		hcd->authorized_default = hcd->wireless? 0 : 1;
+	else
+		hcd->authorized_default = authorized_default;
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
 	/* HC is in reset state, but accessible.  Now do the one-time init,
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 029e288805b..44b6b40aafb 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -96,9 +96,6 @@ config USB_GADGET_VBUS_DRAW
 	   This value will be used except for system-specific gadget
 	   drivers that have more specific information.
 
-config	USB_GADGET_SELECTED
-	boolean
-
 #
 # USB Peripheral Controller Support
 #
@@ -122,10 +119,9 @@ choice
 # Integrated controllers
 #
 
-config USB_GADGET_AT91
-	boolean "Atmel AT91 USB Device Port"
+config USB_AT91
+	tristate "Atmel AT91 USB Device Port"
 	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45
-	select USB_GADGET_SELECTED
 	help
 	   Many Atmel AT91 processors (such as the AT91RM2000) have a
 	   full speed USB Device Port with support for five configurable
@@ -135,27 +131,16 @@ config USB_GADGET_AT91
 	   dynamically linked module called "at91_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_AT91
-	tristate
-	depends on USB_GADGET_AT91
-	default USB_GADGET
-
-config USB_GADGET_ATMEL_USBA
-	boolean "Atmel USBA"
+config USB_ATMEL_USBA
+	tristate "Atmel USBA"
 	select USB_GADGET_DUALSPEED
 	depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 	help
 	  USBA is the integrated high-speed USB Device controller on
 	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
 
-config USB_ATMEL_USBA
-	tristate
-	depends on USB_GADGET_ATMEL_USBA
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_FSL_USB2
-	boolean "Freescale Highspeed USB DR Peripheral Controller"
+config USB_FSL_USB2
+	tristate "Freescale Highspeed USB DR Peripheral Controller"
 	depends on FSL_SOC || ARCH_MXC
 	select USB_GADGET_DUALSPEED
 	select USB_FSL_MPH_DR_OF if OF
@@ -170,26 +155,15 @@ config USB_GADGET_FSL_USB2
 	   dynamically linked module called "fsl_usb2_udc" and force
 	   all gadget drivers to also be dynamically linked.
 
-config USB_FSL_USB2
-	tristate
-	depends on USB_GADGET_FSL_USB2
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_FUSB300
-	boolean "Faraday FUSB300 USB Peripheral Controller"
+config USB_FUSB300
+	tristate "Faraday FUSB300 USB Peripheral Controller"
+	depends on !PHYS_ADDR_T_64BIT
 	select USB_GADGET_DUALSPEED
 	help
 	   Faraday usb device controller FUSB300 driver
 
-config USB_FUSB300
-	tristate
-	depends on USB_GADGET_FUSB300
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_OMAP
-	boolean "OMAP USB Device Controller"
+config USB_OMAP
+	tristate "OMAP USB Device Controller"
 	depends on ARCH_OMAP
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
 	select USB_OTG_UTILS if ARCH_OMAP
@@ -204,14 +178,8 @@ config USB_GADGET_OMAP
 	   dynamically linked module called "omap_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_OMAP
-	tristate
-	depends on USB_GADGET_OMAP
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_PXA25X
-	boolean "PXA 25x or IXP 4xx"
+config USB_PXA25X
+	tristate "PXA 25x or IXP 4xx"
 	depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
 	select USB_OTG_UTILS
 	help
@@ -226,24 +194,18 @@ config USB_GADGET_PXA25X
 	   dynamically linked module called "pxa25x_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_PXA25X
-	tristate
-	depends on USB_GADGET_PXA25X
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
 # if there's only one gadget driver, using only two bulk endpoints,
 # don't waste memory for the other endpoints
 config USB_PXA25X_SMALL
-	depends on USB_GADGET_PXA25X
+	depends on USB_PXA25X
 	bool
 	default n if USB_ETH_RNDIS
 	default y if USB_ZERO
 	default y if USB_ETH
 	default y if USB_G_SERIAL
 
-config USB_GADGET_R8A66597
-	boolean "Renesas R8A66597 USB Peripheral Controller"
+config USB_R8A66597
+	tristate "Renesas R8A66597 USB Peripheral Controller"
 	select USB_GADGET_DUALSPEED
 	help
 	   R8A66597 is a discrete USB host and peripheral controller chip that
@@ -254,32 +216,22 @@ config USB_GADGET_R8A66597
 	   dynamically linked module called "r8a66597_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_R8A66597
-	tristate
-	depends on USB_GADGET_R8A66597
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_RENESAS_USBHS
-	boolean "Renesas USBHS"
+config USB_RENESAS_USBHS_UDC
+	tristate 'Renesas USBHS controller'
+	depends on SUPERH || ARCH_SHMOBILE
 	depends on USB_RENESAS_USBHS
 	select USB_GADGET_DUALSPEED
 	help
-	   Renesas USBHS is a discrete USB host and peripheral controller
-	   chip that supports both full and high speed USB 2.0 data transfers.
-	   platform is able to configure endpoint (pipe) style
+	   Renesas USBHS is a discrete USB host and peripheral controller chip
+	   that supports both full and high speed USB 2.0 data transfers.
+	   It has nine or more configurable endpoints, and endpoint zero.
 
-	   Say "y" to enable the gadget specific portion of the USBHS driver.
-
-
-config USB_RENESAS_USBHS_UDC
-	tristate
-	depends on USB_GADGET_RENESAS_USBHS
-	default USB_GADGET
-	select USB_GADGET_SELECTED
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "renesas_usbhs" and force all
+	   gadget drivers to also be dynamically linked.
 
-config USB_GADGET_PXA27X
-	boolean "PXA 27x"
+config USB_PXA27X
+	tristate "PXA 27x"
 	depends on ARCH_PXA && (PXA27x || PXA3xx)
 	select USB_OTG_UTILS
 	help
@@ -293,14 +245,8 @@ config USB_GADGET_PXA27X
 	   dynamically linked module called "pxa27x_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_PXA27X
-	tristate
-	depends on USB_GADGET_PXA27X
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_S3C_HSOTG
-	boolean "S3C HS/OtG USB Device controller"
+config USB_S3C_HSOTG
+	tristate "S3C HS/OtG USB Device controller"
 	depends on S3C_DEV_USB_HSOTG
 	select USB_GADGET_S3C_HSOTG_PIO
 	select USB_GADGET_DUALSPEED
@@ -308,14 +254,8 @@ config USB_GADGET_S3C_HSOTG
 	  The Samsung S3C64XX USB2.0 high-speed gadget controller
 	  integrated into the S3C64XX series SoC.
 
-config USB_S3C_HSOTG
-	tristate
-	depends on USB_GADGET_S3C_HSOTG
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_IMX
-	boolean "Freescale IMX USB Peripheral Controller"
+config USB_IMX
+	tristate "Freescale IMX USB Peripheral Controller"
 	depends on ARCH_MX1
 	help
 	   Freescale's IMX series include an integrated full speed
@@ -329,14 +269,8 @@ config USB_GADGET_IMX
 	   dynamically linked module called "imx_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_IMX
-	tristate
-	depends on USB_GADGET_IMX
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_S3C2410
-	boolean "S3C2410 USB Device Controller"
+config USB_S3C2410
+	tristate "S3C2410 USB Device Controller"
 	depends on ARCH_S3C2410
 	help
 	  Samsung's S3C2410 is an ARM-4 processor with an integrated
@@ -346,18 +280,12 @@ config USB_GADGET_S3C2410
 	  This driver has been tested on the S3C2410, S3C2412, and
 	  S3C2440 processors.
 
-config USB_S3C2410
-	tristate
-	depends on USB_GADGET_S3C2410
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
 config USB_S3C2410_DEBUG
 	boolean "S3C2410 udc debug messages"
-	depends on USB_GADGET_S3C2410
+	depends on USB_S3C2410
 
-config USB_GADGET_S3C_HSUDC
-	boolean "S3C2416, S3C2443 and S3C2450 USB Device Controller"
+config USB_S3C_HSUDC
+	tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
 	depends on ARCH_S3C2410
 	select USB_GADGET_DUALSPEED
 	help
@@ -367,41 +295,29 @@ config USB_GADGET_S3C_HSUDC
 
 	  This driver has been tested on S3C2416 and S3C2450 processors.
 
-config USB_S3C_HSUDC
-	tristate
-	depends on USB_GADGET_S3C_HSUDC
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_PXA_U2O
-	boolean "PXA9xx Processor USB2.0 controller"
+config USB_PXA_U2O
+	tristate "PXA9xx Processor USB2.0 controller"
+	depends on ARCH_MMP
 	select USB_GADGET_DUALSPEED
 	help
 	  PXA9xx Processor series include a high speed USB2.0 device
 	  controller, which support high speed and full speed USB peripheral.
 
-config USB_PXA_U2O
-	tristate
-	depends on USB_GADGET_PXA_U2O
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
 #
 # Controllers available in both integrated and discrete versions
 #
 
 # musb builds in ../musb along with host support
 config USB_GADGET_MUSB_HDRC
-	boolean "Inventra HDRC USB Peripheral (TI, ADI, ...)"
+	tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)"
 	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
 	select USB_GADGET_DUALSPEED
-	select USB_GADGET_SELECTED
 	help
 	  This OTG-capable silicon IP is used in dual designs including
 	  the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
 
-config USB_GADGET_M66592
-	boolean "Renesas M66592 USB Peripheral Controller"
+config USB_M66592
+	tristate "Renesas M66592 USB Peripheral Controller"
 	select USB_GADGET_DUALSPEED
 	help
 	   M66592 is a discrete USB peripheral controller chip that
@@ -412,18 +328,12 @@ config USB_GADGET_M66592
 	   dynamically linked module called "m66592_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_M66592
-	tristate
-	depends on USB_GADGET_M66592
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
 #
 # Controllers available only in discrete form (and all PCI controllers)
 #
 
-config USB_GADGET_AMD5536UDC
-	boolean "AMD5536 UDC"
+config USB_AMD5536UDC
+	tristate "AMD5536 UDC"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
@@ -437,14 +347,8 @@ config USB_GADGET_AMD5536UDC
 	   dynamically linked module called "amd5536udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_AMD5536UDC
-	tristate
-	depends on USB_GADGET_AMD5536UDC
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_FSL_QE
-	boolean "Freescale QE/CPM USB Device Controller"
+config USB_FSL_QE
+	tristate "Freescale QE/CPM USB Device Controller"
 	depends on FSL_SOC && (QUICC_ENGINE || CPM)
 	help
 	   Some of Freescale PowerPC processors have a Full Speed
@@ -456,14 +360,8 @@ config USB_GADGET_FSL_QE
 	   Set CONFIG_USB_GADGET to "m" to build this driver as a
 	   dynamically linked module called "fsl_qe_udc".
 
-config USB_FSL_QE
-	tristate
-	depends on USB_GADGET_FSL_QE
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_CI13XXX_PCI
-	boolean "MIPS USB CI13xxx PCI UDC"
+config USB_CI13XXX_PCI
+	tristate "MIPS USB CI13xxx PCI UDC"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
@@ -474,14 +372,31 @@ config USB_GADGET_CI13XXX_PCI
 	  dynamically linked module called "ci13xxx_udc" and force all
 	  gadget drivers to also be dynamically linked.
 
-config USB_CI13XXX_PCI
-	tristate
-	depends on USB_GADGET_CI13XXX_PCI
-	default USB_GADGET
-	select USB_GADGET_SELECTED
+config USB_NET2272
+	tristate "PLX NET2272"
+	select USB_GADGET_DUALSPEED
+	help
+	  PLX NET2272 is a USB peripheral controller which supports
+	  both full and high speed USB 2.0 data transfers.
+
+	  It has three configurable endpoints, as well as endpoint zero
+	  (for control transfer).
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "net2272" and force all
+	  gadget drivers to also be dynamically linked.
+
+config USB_NET2272_DMA
+	boolean "Support external DMA controller"
+	depends on USB_NET2272
+	help
+	  The NET2272 part can optionally support an external DMA
+	  controller, but your board has to have support in the
+	  driver itself.
 
-config USB_GADGET_NET2280
-	boolean "NetChip 228x"
+	  If unsure, say "N" here.  The driver works fine in PIO mode.
+
+config USB_NET2280
+	tristate "NetChip 228x"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
@@ -496,14 +411,8 @@ config USB_GADGET_NET2280
 	   dynamically linked module called "net2280" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_NET2280
-	tristate
-	depends on USB_GADGET_NET2280
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_GOKU
-	boolean "Toshiba TC86C001 'Goku-S'"
+config USB_GOKU
+	tristate "Toshiba TC86C001 'Goku-S'"
 	depends on PCI
 	help
 	   The Toshiba TC86C001 is a PCI device which includes controllers
@@ -516,15 +425,10 @@ config USB_GADGET_GOKU
 	   dynamically linked module called "goku_udc" and to force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_GOKU
-	tristate
-	depends on USB_GADGET_GOKU
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_LANGWELL
-	boolean "Intel Langwell USB Device Controller"
+config USB_LANGWELL
+	tristate "Intel Langwell USB Device Controller"
 	depends on PCI
+	depends on !PHYS_ADDR_T_64BIT
 	select USB_GADGET_DUALSPEED
 	help
 	   Intel Langwell USB Device Controller is a High-Speed USB
@@ -537,14 +441,8 @@ config USB_GADGET_LANGWELL
 	   dynamically linked module called "langwell_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_LANGWELL
-	tristate
-	depends on USB_GADGET_LANGWELL
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_EG20T
-	boolean "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC"
+config USB_EG20T
+	tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
@@ -565,14 +463,8 @@ config USB_GADGET_EG20T
 	  ML7213 is companion chip for Intel Atom E6xx series.
 	  ML7213 is completely compatible for Intel EG20T PCH.
 
-config USB_EG20T
-	tristate
-	depends on USB_GADGET_EG20T
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
-config USB_GADGET_CI13XXX_MSM
-	boolean "MIPS USB CI13xxx for MSM"
+config USB_CI13XXX_MSM
+	tristate "MIPS USB CI13xxx for MSM"
 	depends on ARCH_MSM
 	select USB_GADGET_DUALSPEED
 	select USB_MSM_OTG
@@ -588,31 +480,26 @@ config USB_GADGET_CI13XXX_MSM
 	  dynamically linked module called "ci13xxx_msm" and force all
 	  gadget drivers to also be dynamically linked.
 
-config USB_CI13XXX_MSM
-	tristate
-	depends on USB_GADGET_CI13XXX_MSM
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
 #
 # LAST -- dummy/emulated controller
 #
 
-config USB_GADGET_DUMMY_HCD
-	boolean "Dummy HCD (DEVELOPMENT)"
+config USB_DUMMY_HCD
+	tristate "Dummy HCD (DEVELOPMENT)"
 	depends on USB=y || (USB=m && USB_GADGET=m)
 	select USB_GADGET_DUALSPEED
+	select USB_GADGET_SUPERSPEED
 	help
 	  This host controller driver emulates USB, looping all data transfer
 	  requests back to a USB "gadget driver" in the same host.  The host
 	  side is the master; the gadget side is the slave.  Gadget drivers
 	  can be high, full, or low speed; and they have access to endpoints
 	  like those from NET2280, PXA2xx, or SA1100 hardware.
-	  
+
 	  This may help in some stages of creating a driver to embed in a
 	  Linux device, since it lets you debug several parts of the gadget
 	  driver without its hardware or drivers being involved.
-	  
+
 	  Since such a gadget side driver needs to interoperate with a host
 	  side Linux-USB device driver, this may help to debug both sides
 	  of a USB protocol stack.
@@ -621,12 +508,6 @@ config USB_GADGET_DUMMY_HCD
 	  dynamically linked module called "dummy_hcd" and force all
 	  gadget drivers to also be dynamically linked.
 
-config USB_DUMMY_HCD
-	tristate
-	depends on USB_GADGET_DUMMY_HCD
-	default USB_GADGET
-	select USB_GADGET_SELECTED
-
 # NOTE:  Please keep dummy_hcd LAST so that "real hardware" appears
 # first and will be selected by default.
 
@@ -637,12 +518,18 @@ config USB_GADGET_DUALSPEED
 	bool
 	depends on USB_GADGET
 
+# Selected by UDC drivers that support super-speed opperation
+config USB_GADGET_SUPERSPEED
+	bool
+	depends on USB_GADGET
+	depends on USB_GADGET_DUALSPEED
+
 #
 # USB Gadget Drivers
 #
 choice
 	tristate "USB Gadget Drivers"
-	depends on USB_GADGET && USB_GADGET_SELECTED
+	depends on USB_GADGET
 	default USB_ETH
 	help
 	  A Linux "Gadget Driver" talks to the USB Peripheral Controller
@@ -848,7 +735,7 @@ config USB_FUNCTIONFS_GENERIC
 	  no Ethernet interface.
 
 config USB_FILE_STORAGE
-	tristate "File-backed Storage Gadget"
+	tristate "File-backed Storage Gadget (DEPRECATED)"
 	depends on BLOCK
 	help
 	  The File-backed Storage Gadget acts as a USB Mass Storage
@@ -859,6 +746,9 @@ config USB_FILE_STORAGE
 	  Say "y" to link the driver statically, or "m" to build a
 	  dynamically linked module called "g_file_storage".
 
+	  NOTE: This driver is deprecated.  Its replacement is the
+	  Mass Storage Gadget.
+
 config USB_FILE_STORAGE_TEST
 	bool "File-backed Storage Gadget testing version"
 	depends on USB_FILE_STORAGE
@@ -878,14 +768,11 @@ config USB_MASS_STORAGE
 	  device (in much the same way as the "loop" device driver),
 	  specified as a module parameter or sysfs option.
 
-	  This is heavily based on File-backed Storage Gadget and in most
-	  cases you will want to use FSG instead.  This gadget is mostly
-	  here to test the functionality of the Mass Storage Function
-	  which may be used with composite framework.
+	  This driver is an updated replacement for the deprecated
+	  File-backed Storage Gadget (g_file_storage).
 
 	  Say "y" to link the driver statically, or "m" to build
-	  a dynamically linked module called "g_mass_storage".  If unsure,
-	  consider File-backed Storage Gadget.
+	  a dynamically linked module called "g_mass_storage".
 
 config USB_G_SERIAL
 	tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 4fe92b18a05..9ba725af4a0 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -3,7 +3,9 @@
 #
 ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
 
+obj-$(CONFIG_USB_GADGET)	+= udc-core.o
 obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
+obj-$(CONFIG_USB_NET2272)	+= net2272.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
 obj-$(CONFIG_USB_AMD5536UDC)	+= amd5536udc.o
 obj-$(CONFIG_USB_PXA25X)	+= pxa25x_udc.o
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 95e8138cd48..70f2b376c86 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -1438,10 +1438,15 @@ static int udc_wakeup(struct usb_gadget *gadget)
 	return 0;
 }
 
+static int amd5536_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int amd5536_stop(struct usb_gadget_driver *driver);
 /* gadget operations */
 static const struct usb_gadget_ops udc_ops = {
 	.wakeup		= udc_wakeup,
 	.get_frame	= udc_get_frame,
+	.start		= amd5536_start,
+	.stop		= amd5536_stop,
 };
 
 /* Setups endpoint parameters, adds endpoints to linked list */
@@ -1955,7 +1960,7 @@ static int setup_ep0(struct udc *dev)
 }
 
 /* Called by gadget driver to register itself */
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int amd5536_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct udc		*dev = udc;
@@ -2002,7 +2007,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
 /* shutdown requests and disconnect from gadget */
 static void
@@ -2027,7 +2031,7 @@ __acquires(dev->lock)
 }
 
 /* Called by gadget driver to unregister itself */
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int amd5536_stop(struct usb_gadget_driver *driver)
 {
 	struct udc	*dev = udc;
 	unsigned long	flags;
@@ -2057,8 +2061,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
-
 
 /* Clear pending NAK bits */
 static void udc_process_cnak_queue(struct udc *dev)
@@ -3134,6 +3136,7 @@ static void udc_pci_remove(struct pci_dev *pdev)
 
 	dev = pci_get_drvdata(pdev);
 
+	usb_del_gadget_udc(&udc->gadget);
 	/* gadget driver must not be registered */
 	BUG_ON(dev->driver != NULL);
 
@@ -3382,8 +3385,13 @@ static int udc_probe(struct udc *dev)
 		"driver version: %s(for Geode5536 B1)\n", tmp);
 	udc = dev;
 
+	retval = usb_add_gadget_udc(&udc->pdev->dev, &dev->gadget);
+	if (retval)
+		goto finished;
+
 	retval = device_register(&dev->gadget.dev);
 	if (retval) {
+		usb_del_gadget_udc(&dev->gadget);
 		put_device(&dev->gadget.dev);
 		goto finished;
 	}
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index f4690ffcb48..98cbc06c30f 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -985,12 +985,18 @@ static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on)
 	return 0;
 }
 
+static int at91_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int at91_stop(struct usb_gadget_driver *driver);
+
 static const struct usb_gadget_ops at91_udc_ops = {
 	.get_frame		= at91_get_frame,
 	.wakeup			= at91_wakeup,
 	.set_selfpowered	= at91_set_selfpowered,
 	.vbus_session		= at91_vbus_session,
 	.pullup			= at91_pullup,
+	.start			= at91_start,
+	.stop			= at91_stop,
 
 	/*
 	 * VBUS-powered devices may also also want to support bigger
@@ -1628,7 +1634,7 @@ static void at91_vbus_timer(unsigned long data)
 		schedule_work(&udc->vbus_timer_work);
 }
 
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int at91_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct at91_udc	*udc = &controller;
@@ -1672,9 +1678,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	DBG("bound to %s\n", driver->driver.name);
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
+static int at91_stop(struct usb_gadget_driver *driver)
 {
 	struct at91_udc *udc = &controller;
 	unsigned long	flags;
@@ -1696,7 +1701,6 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
 	DBG("unbound from %s\n", driver->driver.name);
 	return 0;
 }
-EXPORT_SYMBOL (usb_gadget_unregister_driver);
 
 /*-------------------------------------------------------------------------*/
 
@@ -1854,13 +1858,18 @@ static int __init at91udc_probe(struct platform_device *pdev)
 		DBG("no VBUS detection, assuming always-on\n");
 		udc->vbus = 1;
 	}
+	retval = usb_add_gadget_udc(dev, &udc->gadget);
+	if (retval)
+		goto fail4;
 	dev_set_drvdata(dev, udc);
 	device_init_wakeup(dev, 1);
 	create_debug_file(udc);
 
 	INFO("%s version %s\n", driver_name, DRIVER_VERSION);
 	return 0;
-
+fail4:
+	if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled)
+		free_irq(udc->board.vbus_pin, udc);
 fail3:
 	if (udc->board.vbus_pin > 0)
 		gpio_free(udc->board.vbus_pin);
@@ -1887,6 +1896,7 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 
 	DBG("remove\n");
 
+	usb_del_gadget_udc(&udc->gadget);
 	if (udc->driver)
 		return -EBUSY;
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index f045c8968a6..5b1665eb1be 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1007,10 +1007,16 @@ usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
 	return 0;
 }
 
+static int atmel_usba_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int atmel_usba_stop(struct usb_gadget_driver *driver);
+
 static const struct usb_gadget_ops usba_udc_ops = {
 	.get_frame		= usba_udc_get_frame,
 	.wakeup			= usba_udc_wakeup,
 	.set_selfpowered	= usba_udc_set_selfpowered,
+	.start			= atmel_usba_start,
+	.stop			= atmel_usba_stop,
 };
 
 static struct usb_endpoint_descriptor usba_ep0_desc = {
@@ -1789,7 +1795,7 @@ out:
 	return IRQ_HANDLED;
 }
 
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int atmel_usba_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct usba_udc *udc = &the_udc;
@@ -1842,9 +1848,8 @@ err_driver_bind:
 	udc->gadget.dev.driver = NULL;
 	return ret;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int atmel_usba_stop(struct usb_gadget_driver *driver)
 {
 	struct usba_udc *udc = &the_udc;
 	unsigned long flags;
@@ -1880,7 +1885,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
 static int __init usba_udc_probe(struct platform_device *pdev)
 {
@@ -2021,12 +2025,24 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 		}
 	}
 
+	ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
+	if (ret)
+		goto err_add_udc;
+
 	usba_init_debugfs(udc);
 	for (i = 1; i < pdata->num_ep; i++)
 		usba_ep_init_debugfs(udc, &usba_ep[i]);
 
 	return 0;
 
+err_add_udc:
+	if (gpio_is_valid(pdata->vbus_pin)) {
+		free_irq(gpio_to_irq(udc->vbus_pin), udc);
+		gpio_free(udc->vbus_pin);
+	}
+
+	device_unregister(&udc->gadget.dev);
+
 err_device_add:
 	free_irq(irq, udc);
 err_request_irq:
@@ -2053,6 +2069,8 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
 
 	udc = platform_get_drvdata(pdev);
 
+	usb_del_gadget_udc(&udc->gadget);
+
 	for (i = 1; i < pdata->num_ep; i++)
 		usba_ep_cleanup_debugfs(&usba_ep[i]);
 	usba_cleanup_debugfs(udc);
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 93b999e49ef..9d89ae4765a 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -165,6 +165,7 @@ static struct usb_composite_driver audio_driver = {
 	.name		= "g_audio",
 	.dev		= &device_desc,
 	.strings	= audio_strings,
+	.max_speed	= USB_SPEED_HIGH,
 	.unbind		= __exit_p(audio_unbind),
 };
 
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index 2720ab07ef1..b1c1afbb875 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -244,6 +244,7 @@ static struct usb_composite_driver cdc_driver = {
 	.name		= "g_cdc",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_HIGH,
 	.unbind		= __exit_p(cdc_unbind),
 };
 
diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c
index 139ac941959..470981ad6f7 100644
--- a/drivers/usb/gadget/ci13xxx_msm.c
+++ b/drivers/usb/gadget/ci13xxx_msm.c
@@ -126,6 +126,7 @@ static struct platform_driver ci13xxx_msm_driver = {
 	.probe = ci13xxx_msm_probe,
 	.driver = { .name = "msm_hsusb", },
 };
+MODULE_ALIAS("platform:msm_hsusb");
 
 static int __init ci13xxx_msm_init(void)
 {
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index baaf87ed768..1265a8502ea 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -857,7 +857,7 @@ static void dbg_print(u8 addr, const char *name, int status, const char *extra)
 	stamp = stamp * 1000000 + tval.tv_usec;
 
 	scnprintf(dbg_data.buf[dbg_data.idx], DBG_DATA_MSG,
-		  "%04X\t� %02X %-7.7s %4i �\t%s\n",
+		  "%04X\t? %02X %-7.7s %4i ?\t%s\n",
 		  stamp, addr, name, status, extra);
 
 	dbg_inc(&dbg_data.idx);
@@ -865,7 +865,7 @@ static void dbg_print(u8 addr, const char *name, int status, const char *extra)
 	write_unlock_irqrestore(&dbg_data.lck, flags);
 
 	if (dbg_data.tty != 0)
-		pr_notice("%04X\t� %02X %-7.7s %4i �\t%s\n",
+		pr_notice("%04X\t? %02X %-7.7s %4i ?\t%s\n",
 			  stamp, addr, name, status, extra);
 }
 
@@ -1025,15 +1025,15 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr,
 
 	n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n",
 		       isr_statistics.test);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "� ui  = %d\n",
+	n += scnprintf(buf + n, PAGE_SIZE - n, "? ui  = %d\n",
 		       isr_statistics.ui);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "� uei = %d\n",
+	n += scnprintf(buf + n, PAGE_SIZE - n, "? uei = %d\n",
 		       isr_statistics.uei);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "� pci = %d\n",
+	n += scnprintf(buf + n, PAGE_SIZE - n, "? pci = %d\n",
 		       isr_statistics.pci);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "� uri = %d\n",
+	n += scnprintf(buf + n, PAGE_SIZE - n, "? uri = %d\n",
 		       isr_statistics.uri);
-	n += scnprintf(buf + n, PAGE_SIZE - n, "� sli = %d\n",
+	n += scnprintf(buf + n, PAGE_SIZE - n, "? sli = %d\n",
 		       isr_statistics.sli);
 	n += scnprintf(buf + n, PAGE_SIZE - n, "*none = %d\n",
 		       isr_statistics.none);
@@ -1214,12 +1214,13 @@ static DEVICE_ATTR(qheads, S_IRUSR, show_qheads, NULL);
  *
  * Check "device.h" for details
  */
+#define DUMP_ENTRIES	512
 static ssize_t show_registers(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
 	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
-	u32 dump[512];
+	u32 *dump;
 	unsigned i, k, n = 0;
 
 	dbg_trace("[%s] %p\n", __func__, buf);
@@ -1228,8 +1229,14 @@ static ssize_t show_registers(struct device *dev,
 		return 0;
 	}
 
+	dump = kmalloc(sizeof(u32) * DUMP_ENTRIES, GFP_KERNEL);
+	if (!dump) {
+		dev_err(dev, "%s: out of memory\n", __func__);
+		return 0;
+	}
+
 	spin_lock_irqsave(udc->lock, flags);
-	k = hw_register_read(dump, sizeof(dump)/sizeof(u32));
+	k = hw_register_read(dump, DUMP_ENTRIES);
 	spin_unlock_irqrestore(udc->lock, flags);
 
 	for (i = 0; i < k; i++) {
@@ -1237,6 +1244,7 @@ static ssize_t show_registers(struct device *dev,
 			       "reg[0x%04X] = 0x%08X\n",
 			       i * (unsigned)sizeof(u32), dump[i]);
 	}
+	kfree(dump);
 
 	return n;
 }
@@ -2515,6 +2523,9 @@ static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 	return -ENOTSUPP;
 }
 
+static int ci13xxx_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int ci13xxx_stop(struct usb_gadget_driver *driver);
 /**
  * Device operations part of the API to the USB controller hardware,
  * which don't involve endpoints (or i/o)
@@ -2524,17 +2535,19 @@ static const struct usb_gadget_ops usb_gadget_ops = {
 	.vbus_session	= ci13xxx_vbus_session,
 	.wakeup		= ci13xxx_wakeup,
 	.vbus_draw	= ci13xxx_vbus_draw,
+	.start		= ci13xxx_start,
+	.stop		= ci13xxx_stop,
 };
 
 /**
- * usb_gadget_probe_driver: register a gadget driver
+ * ci13xxx_start: register a gadget driver
  * @driver: the driver being registered
  * @bind: the driver's bind callback
  *
- * Check usb_gadget_probe_driver() at <linux/usb/gadget.h> for details.
+ * Check ci13xxx_start() at <linux/usb/gadget.h> for details.
  * Interrupts are enabled here.
  */
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int ci13xxx_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct ci13xxx *udc = _udc;
@@ -2615,10 +2628,13 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	if (retval)
 		goto done;
 	spin_unlock_irqrestore(udc->lock, flags);
-	retval = usb_ep_enable(&udc->ep0out.ep, &ctrl_endpt_out_desc);
+	udc->ep0out.ep.desc = &ctrl_endpt_out_desc;
+	retval = usb_ep_enable(&udc->ep0out.ep);
 	if (retval)
 		return retval;
-	retval = usb_ep_enable(&udc->ep0in.ep, &ctrl_endpt_in_desc);
+
+	udc->ep0in.ep.desc = &ctrl_endpt_in_desc;
+	retval = usb_ep_enable(&udc->ep0in.ep);
 	if (retval)
 		return retval;
 	spin_lock_irqsave(udc->lock, flags);
@@ -2657,14 +2673,13 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	spin_unlock_irqrestore(udc->lock, flags);
 	return retval;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
 /**
- * usb_gadget_unregister_driver: unregister a gadget driver
+ * ci13xxx_stop: unregister a gadget driver
  *
  * Check usb_gadget_unregister_driver() at "usb_gadget.h" for details
  */
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int ci13xxx_stop(struct usb_gadget_driver *driver)
 {
 	struct ci13xxx *udc = _udc;
 	unsigned long i, flags;
@@ -2726,7 +2741,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
 /******************************************************************************
  * BUS block
@@ -2901,12 +2915,23 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev,
 		if (retval)
 			goto remove_dbg;
 	}
+
+	retval = usb_add_gadget_udc(dev, &udc->gadget);
+	if (retval)
+		goto remove_trans;
+
 	pm_runtime_no_callbacks(&udc->gadget.dev);
 	pm_runtime_enable(&udc->gadget.dev);
 
 	_udc = udc;
 	return retval;
 
+remove_trans:
+	if (udc->transceiver) {
+		otg_set_peripheral(udc->transceiver, &udc->gadget);
+		otg_put_transceiver(udc->transceiver);
+	}
+
 	err("error = %i", retval);
 remove_dbg:
 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
@@ -2936,6 +2961,7 @@ static void udc_remove(void)
 		err("EINVAL");
 		return;
 	}
+	usb_del_gadget_udc(&udc->gadget);
 
 	if (udc->transceiver) {
 		otg_set_peripheral(udc->transceiver, &udc->gadget);
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 5cbb1a41c22..5ef87794fd3 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -27,7 +27,7 @@
 #include <linux/utsname.h>
 
 #include <linux/usb/composite.h>
-
+#include <asm/unaligned.h>
 
 /*
  * The code in this file is utility code, used to build a gadget driver
@@ -74,6 +74,130 @@ MODULE_PARM_DESC(iSerialNumber, "SerialNumber string");
 static char composite_manufacturer[50];
 
 /*-------------------------------------------------------------------------*/
+/**
+ * next_ep_desc() - advance to the next EP descriptor
+ * @t: currect pointer within descriptor array
+ *
+ * Return: next EP descriptor or NULL
+ *
+ * Iterate over @t until either EP descriptor found or
+ * NULL (that indicates end of list) encountered
+ */
+static struct usb_descriptor_header**
+next_ep_desc(struct usb_descriptor_header **t)
+{
+	for (; *t; t++) {
+		if ((*t)->bDescriptorType == USB_DT_ENDPOINT)
+			return t;
+	}
+	return NULL;
+}
+
+/*
+ * for_each_ep_desc()- iterate over endpoint descriptors in the
+ *		descriptors list
+ * @start:	pointer within descriptor array.
+ * @ep_desc:	endpoint descriptor to use as the loop cursor
+ */
+#define for_each_ep_desc(start, ep_desc) \
+	for (ep_desc = next_ep_desc(start); \
+	      ep_desc; ep_desc = next_ep_desc(ep_desc+1))
+
+/**
+ * config_ep_by_speed() - configures the given endpoint
+ * according to gadget speed.
+ * @g: pointer to the gadget
+ * @f: usb function
+ * @_ep: the endpoint to configure
+ *
+ * Return: error code, 0 on success
+ *
+ * This function chooses the right descriptors for a given
+ * endpoint according to gadget speed and saves it in the
+ * endpoint desc field. If the endpoint already has a descriptor
+ * assigned to it - overwrites it with currently corresponding
+ * descriptor. The endpoint maxpacket field is updated according
+ * to the chosen descriptor.
+ * Note: the supplied function should hold all the descriptors
+ * for supported speeds
+ */
+int config_ep_by_speed(struct usb_gadget *g,
+			struct usb_function *f,
+			struct usb_ep *_ep)
+{
+	struct usb_endpoint_descriptor *chosen_desc = NULL;
+	struct usb_descriptor_header **speed_desc = NULL;
+
+	struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
+	int want_comp_desc = 0;
+
+	struct usb_descriptor_header **d_spd; /* cursor for speed desc */
+
+	if (!g || !f || !_ep)
+		return -EIO;
+
+	/* select desired speed */
+	switch (g->speed) {
+	case USB_SPEED_SUPER:
+		if (gadget_is_superspeed(g)) {
+			speed_desc = f->ss_descriptors;
+			want_comp_desc = 1;
+			break;
+		}
+		/* else: Fall trough */
+	case USB_SPEED_HIGH:
+		if (gadget_is_dualspeed(g)) {
+			speed_desc = f->hs_descriptors;
+			break;
+		}
+		/* else: fall through */
+	default:
+		speed_desc = f->descriptors;
+	}
+	/* find descriptors */
+	for_each_ep_desc(speed_desc, d_spd) {
+		chosen_desc = (struct usb_endpoint_descriptor *)*d_spd;
+		if (chosen_desc->bEndpointAddress == _ep->address)
+			goto ep_found;
+	}
+	return -EIO;
+
+ep_found:
+	/* commit results */
+	_ep->maxpacket = le16_to_cpu(chosen_desc->wMaxPacketSize);
+	_ep->desc = chosen_desc;
+	_ep->comp_desc = NULL;
+	_ep->maxburst = 0;
+	_ep->mult = 0;
+	if (!want_comp_desc)
+		return 0;
+
+	/*
+	 * Companion descriptor should follow EP descriptor
+	 * USB 3.0 spec, #9.6.7
+	 */
+	comp_desc = (struct usb_ss_ep_comp_descriptor *)*(++d_spd);
+	if (!comp_desc ||
+	    (comp_desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP))
+		return -EIO;
+	_ep->comp_desc = comp_desc;
+	if (g->speed == USB_SPEED_SUPER) {
+		switch (usb_endpoint_type(_ep->desc)) {
+		case USB_ENDPOINT_XFER_BULK:
+		case USB_ENDPOINT_XFER_INT:
+			_ep->maxburst = comp_desc->bMaxBurst;
+			break;
+		case USB_ENDPOINT_XFER_ISOC:
+			/* mult: bits 1:0 of bmAttributes */
+			_ep->mult = comp_desc->bmAttributes & 0x3;
+			break;
+		default:
+			/* Do nothing for control endpoints */
+			break;
+		}
+	}
+	return 0;
+}
 
 /**
  * usb_add_function() - add a function to a configuration
@@ -123,6 +247,8 @@ int usb_add_function(struct usb_configuration *config,
 		config->fullspeed = true;
 	if (!config->highspeed && function->hs_descriptors)
 		config->highspeed = true;
+	if (!config->superspeed && function->ss_descriptors)
+		config->superspeed = true;
 
 done:
 	if (value)
@@ -266,10 +392,17 @@ static int config_buf(struct usb_configuration *config,
 	list_for_each_entry(f, &config->functions, list) {
 		struct usb_descriptor_header **descriptors;
 
-		if (speed == USB_SPEED_HIGH)
+		switch (speed) {
+		case USB_SPEED_SUPER:
+			descriptors = f->ss_descriptors;
+			break;
+		case USB_SPEED_HIGH:
 			descriptors = f->hs_descriptors;
-		else
+			break;
+		default:
 			descriptors = f->descriptors;
+		}
+
 		if (!descriptors)
 			continue;
 		status = usb_descriptor_fillbuf(next, len,
@@ -292,9 +425,10 @@ static int config_desc(struct usb_composite_dev *cdev, unsigned w_value)
 	u8				type = w_value >> 8;
 	enum usb_device_speed		speed = USB_SPEED_UNKNOWN;
 
-	if (gadget_is_dualspeed(gadget)) {
-		int			hs = 0;
-
+	if (gadget->speed == USB_SPEED_SUPER)
+		speed = gadget->speed;
+	else if (gadget_is_dualspeed(gadget)) {
+		int	hs = 0;
 		if (gadget->speed == USB_SPEED_HIGH)
 			hs = 1;
 		if (type == USB_DT_OTHER_SPEED_CONFIG)
@@ -308,13 +442,20 @@ static int config_desc(struct usb_composite_dev *cdev, unsigned w_value)
 	w_value &= 0xff;
 	list_for_each_entry(c, &cdev->configs, list) {
 		/* ignore configs that won't work at this speed */
-		if (speed == USB_SPEED_HIGH) {
+		switch (speed) {
+		case USB_SPEED_SUPER:
+			if (!c->superspeed)
+				continue;
+			break;
+		case USB_SPEED_HIGH:
 			if (!c->highspeed)
 				continue;
-		} else {
+			break;
+		default:
 			if (!c->fullspeed)
 				continue;
 		}
+
 		if (w_value == 0)
 			return config_buf(c, speed, cdev->req->buf, type);
 		w_value--;
@@ -328,16 +469,22 @@ static int count_configs(struct usb_composite_dev *cdev, unsigned type)
 	struct usb_configuration	*c;
 	unsigned			count = 0;
 	int				hs = 0;
+	int				ss = 0;
 
 	if (gadget_is_dualspeed(gadget)) {
 		if (gadget->speed == USB_SPEED_HIGH)
 			hs = 1;
+		if (gadget->speed == USB_SPEED_SUPER)
+			ss = 1;
 		if (type == USB_DT_DEVICE_QUALIFIER)
 			hs = !hs;
 	}
 	list_for_each_entry(c, &cdev->configs, list) {
 		/* ignore configs that won't work at this speed */
-		if (hs) {
+		if (ss) {
+			if (!c->superspeed)
+				continue;
+		} else if (hs) {
 			if (!c->highspeed)
 				continue;
 		} else {
@@ -349,6 +496,71 @@ static int count_configs(struct usb_composite_dev *cdev, unsigned type)
 	return count;
 }
 
+/**
+ * bos_desc() - prepares the BOS descriptor.
+ * @cdev: pointer to usb_composite device to generate the bos
+ *	descriptor for
+ *
+ * This function generates the BOS (Binary Device Object)
+ * descriptor and its device capabilities descriptors. The BOS
+ * descriptor should be supported by a SuperSpeed device.
+ */
+static int bos_desc(struct usb_composite_dev *cdev)
+{
+	struct usb_ext_cap_descriptor	*usb_ext;
+	struct usb_ss_cap_descriptor	*ss_cap;
+	struct usb_dcd_config_params	dcd_config_params;
+	struct usb_bos_descriptor	*bos = cdev->req->buf;
+
+	bos->bLength = USB_DT_BOS_SIZE;
+	bos->bDescriptorType = USB_DT_BOS;
+
+	bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE);
+	bos->bNumDeviceCaps = 0;
+
+	/*
+	 * A SuperSpeed device shall include the USB2.0 extension descriptor
+	 * and shall support LPM when operating in USB2.0 HS mode.
+	 */
+	usb_ext = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+	bos->bNumDeviceCaps++;
+	le16_add_cpu(&bos->wTotalLength, USB_DT_USB_EXT_CAP_SIZE);
+	usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
+	usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+	usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
+	usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT);
+
+	/*
+	 * The Superspeed USB Capability descriptor shall be implemented by all
+	 * SuperSpeed devices.
+	 */
+	ss_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+	bos->bNumDeviceCaps++;
+	le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SS_CAP_SIZE);
+	ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE;
+	ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+	ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE;
+	ss_cap->bmAttributes = 0; /* LTM is not supported yet */
+	ss_cap->wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION |
+				USB_FULL_SPEED_OPERATION |
+				USB_HIGH_SPEED_OPERATION |
+				USB_5GBPS_OPERATION);
+	ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION;
+
+	/* Get Controller configuration */
+	if (cdev->gadget->ops->get_config_params)
+		cdev->gadget->ops->get_config_params(&dcd_config_params);
+	else {
+		dcd_config_params.bU1devExitLat = USB_DEFULT_U1_DEV_EXIT_LAT;
+		dcd_config_params.bU2DevExitLat =
+			cpu_to_le16(USB_DEFULT_U2_DEV_EXIT_LAT);
+	}
+	ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat;
+	ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat;
+
+	return le16_to_cpu(bos->wTotalLength);
+}
+
 static void device_qual(struct usb_composite_dev *cdev)
 {
 	struct usb_qualifier_descriptor	*qual = cdev->req->buf;
@@ -361,7 +573,7 @@ static void device_qual(struct usb_composite_dev *cdev)
 	qual->bDeviceSubClass = cdev->desc.bDeviceSubClass;
 	qual->bDeviceProtocol = cdev->desc.bDeviceProtocol;
 	/* ASSUME same EP0 fifo size at both speeds */
-	qual->bMaxPacketSize0 = cdev->desc.bMaxPacketSize0;
+	qual->bMaxPacketSize0 = cdev->gadget->ep0->maxpacket;
 	qual->bNumConfigurations = count_configs(cdev, USB_DT_DEVICE_QUALIFIER);
 	qual->bRESERVED = 0;
 }
@@ -392,28 +604,46 @@ static int set_config(struct usb_composite_dev *cdev,
 	unsigned		power = gadget_is_otg(gadget) ? 8 : 100;
 	int			tmp;
 
-	if (cdev->config)
-		reset_config(cdev);
-
 	if (number) {
 		list_for_each_entry(c, &cdev->configs, list) {
 			if (c->bConfigurationValue == number) {
+				/*
+				 * We disable the FDs of the previous
+				 * configuration only if the new configuration
+				 * is a valid one
+				 */
+				if (cdev->config)
+					reset_config(cdev);
 				result = 0;
 				break;
 			}
 		}
 		if (result < 0)
 			goto done;
-	} else
+	} else { /* Zero configuration value - need to reset the config */
+		if (cdev->config)
+			reset_config(cdev);
 		result = 0;
+	}
 
 	INFO(cdev, "%s speed config #%d: %s\n",
 		({ char *speed;
 		switch (gadget->speed) {
-		case USB_SPEED_LOW:	speed = "low"; break;
-		case USB_SPEED_FULL:	speed = "full"; break;
-		case USB_SPEED_HIGH:	speed = "high"; break;
-		default:		speed = "?"; break;
+		case USB_SPEED_LOW:
+			speed = "low";
+			break;
+		case USB_SPEED_FULL:
+			speed = "full";
+			break;
+		case USB_SPEED_HIGH:
+			speed = "high";
+			break;
+		case USB_SPEED_SUPER:
+			speed = "super";
+			break;
+		default:
+			speed = "?";
+			break;
 		} ; speed; }), number, c ? c->label : "unconfigured");
 
 	if (!c)
@@ -435,10 +665,16 @@ static int set_config(struct usb_composite_dev *cdev,
 		 * function's setup callback instead of the current
 		 * configuration's setup callback.
 		 */
-		if (gadget->speed == USB_SPEED_HIGH)
+		switch (gadget->speed) {
+		case USB_SPEED_SUPER:
+			descriptors = f->ss_descriptors;
+			break;
+		case USB_SPEED_HIGH:
 			descriptors = f->hs_descriptors;
-		else
+			break;
+		default:
 			descriptors = f->descriptors;
+		}
 
 		for (; *descriptors; ++descriptors) {
 			struct usb_endpoint_descriptor *ep;
@@ -531,8 +767,9 @@ int usb_add_config(struct usb_composite_dev *cdev,
 	} else {
 		unsigned	i;
 
-		DBG(cdev, "cfg %d/%p speeds:%s%s\n",
+		DBG(cdev, "cfg %d/%p speeds:%s%s%s\n",
 			config->bConfigurationValue, config,
+			config->superspeed ? " super" : "",
 			config->highspeed ? " high" : "",
 			config->fullspeed
 				? (gadget_is_dualspeed(cdev->gadget)
@@ -811,6 +1048,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
 	struct usb_request		*req = cdev->req;
 	int				value = -EOPNOTSUPP;
+	int				status = 0;
 	u16				w_index = le16_to_cpu(ctrl->wIndex);
 	u8				intf = w_index & 0xFF;
 	u16				w_value = le16_to_cpu(ctrl->wValue);
@@ -838,18 +1076,29 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 		case USB_DT_DEVICE:
 			cdev->desc.bNumConfigurations =
 				count_configs(cdev, USB_DT_DEVICE);
+			cdev->desc.bMaxPacketSize0 =
+				cdev->gadget->ep0->maxpacket;
+			if (gadget_is_superspeed(gadget)) {
+				if (gadget->speed >= USB_SPEED_SUPER)
+					cdev->desc.bcdUSB = cpu_to_le16(0x0300);
+				else
+					cdev->desc.bcdUSB = cpu_to_le16(0x0210);
+			}
+
 			value = min(w_length, (u16) sizeof cdev->desc);
 			memcpy(req->buf, &cdev->desc, value);
 			break;
 		case USB_DT_DEVICE_QUALIFIER:
-			if (!gadget_is_dualspeed(gadget))
+			if (!gadget_is_dualspeed(gadget) ||
+			    gadget->speed >= USB_SPEED_SUPER)
 				break;
 			device_qual(cdev);
 			value = min_t(int, w_length,
 				sizeof(struct usb_qualifier_descriptor));
 			break;
 		case USB_DT_OTHER_SPEED_CONFIG:
-			if (!gadget_is_dualspeed(gadget))
+			if (!gadget_is_dualspeed(gadget) ||
+			    gadget->speed >= USB_SPEED_SUPER)
 				break;
 			/* FALLTHROUGH */
 		case USB_DT_CONFIG:
@@ -863,6 +1112,12 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			if (value >= 0)
 				value = min(w_length, (u16) value);
 			break;
+		case USB_DT_BOS:
+			if (gadget_is_superspeed(gadget)) {
+				value = bos_desc(cdev);
+				value = min(w_length, (u16) value);
+			}
+			break;
 		}
 		break;
 
@@ -930,6 +1185,61 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 		*((u8 *)req->buf) = value;
 		value = min(w_length, (u16) 1);
 		break;
+
+	/*
+	 * USB 3.0 additions:
+	 * Function driver should handle get_status request. If such cb
+	 * wasn't supplied we respond with default value = 0
+	 * Note: function driver should supply such cb only for the first
+	 * interface of the function
+	 */
+	case USB_REQ_GET_STATUS:
+		if (!gadget_is_superspeed(gadget))
+			goto unknown;
+		if (ctrl->bRequestType != (USB_DIR_IN | USB_RECIP_INTERFACE))
+			goto unknown;
+		value = 2;	/* This is the length of the get_status reply */
+		put_unaligned_le16(0, req->buf);
+		if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+			break;
+		f = cdev->config->interface[intf];
+		if (!f)
+			break;
+		status = f->get_status ? f->get_status(f) : 0;
+		if (status < 0)
+			break;
+		put_unaligned_le16(status & 0x0000ffff, req->buf);
+		break;
+	/*
+	 * Function drivers should handle SetFeature/ClearFeature
+	 * (FUNCTION_SUSPEND) request. function_suspend cb should be supplied
+	 * only for the first interface of the function
+	 */
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		if (!gadget_is_superspeed(gadget))
+			goto unknown;
+		if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_INTERFACE))
+			goto unknown;
+		switch (w_value) {
+		case USB_INTRF_FUNC_SUSPEND:
+			if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+				break;
+			f = cdev->config->interface[intf];
+			if (!f)
+				break;
+			value = 0;
+			if (f->func_suspend)
+				value = f->func_suspend(f, w_index >> 8);
+			if (value < 0) {
+				ERROR(cdev,
+				      "func_suspend() returned error %d\n",
+				      value);
+				value = 0;
+			}
+			break;
+		}
+		break;
 	default:
 unknown:
 		VDBG(cdev,
@@ -1140,7 +1450,6 @@ static int composite_bind(struct usb_gadget *gadget)
 		goto fail;
 
 	cdev->desc = *composite->dev;
-	cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
 
 	/* standardized runtime overrides for device ID data */
 	if (idVendor)
@@ -1247,7 +1556,11 @@ composite_resume(struct usb_gadget *gadget)
 /*-------------------------------------------------------------------------*/
 
 static struct usb_gadget_driver composite_driver = {
+#ifdef CONFIG_USB_GADGET_SUPERSPEED
+	.speed		= USB_SPEED_SUPER,
+#else
 	.speed		= USB_SPEED_HIGH,
+#endif
 
 	.unbind		= composite_unbind,
 
@@ -1293,6 +1606,8 @@ int usb_composite_probe(struct usb_composite_driver *driver,
 		driver->iProduct = driver->name;
 	composite_driver.function =  (char *) driver->name;
 	composite_driver.driver.name = driver->name;
+	composite_driver.speed = min((u8)composite_driver.speed,
+				     (u8)driver->max_speed);
 	composite = driver;
 	composite_gadget_bind = bind;
 
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index 09084fd646a..b2c00133487 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -165,28 +165,3 @@ usb_copy_descriptors(struct usb_descriptor_header **src)
 	return ret;
 }
 
-/**
- * usb_find_endpoint - find a copy of an endpoint descriptor
- * @src: original vector of descriptors
- * @copy: copy of @src
- * @match: endpoint descriptor found in @src
- *
- * This returns the copy of the @match descriptor made for @copy.  Its
- * intended use is to help remembering the endpoint descriptor to use
- * when enabling a given endpoint.
- */
-struct usb_endpoint_descriptor *
-usb_find_endpoint(
-	struct usb_descriptor_header **src,
-	struct usb_descriptor_header **copy,
-	struct usb_endpoint_descriptor *match
-)
-{
-	while (*src) {
-		if (*src == (void *) match)
-			return (void *)*copy;
-		src++;
-		copy++;
-	}
-	return NULL;
-}
diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c
index dbe92ee8847..8beefdd3678 100644
--- a/drivers/usb/gadget/dbgp.c
+++ b/drivers/usb/gadget/dbgp.c
@@ -173,7 +173,9 @@ fail_1:
 
 static int __enable_ep(struct usb_ep *ep, struct usb_endpoint_descriptor *desc)
 {
-	int err = usb_ep_enable(ep, desc);
+	int err;
+	ep->desc = desc;
+	err = usb_ep_enable(ep);
 	ep->driver_data = dbgp.gadget;
 	return err;
 }
@@ -268,8 +270,8 @@ static int __init dbgp_configure_endpoints(struct usb_gadget *gadget)
 	dbgp.serial->in = dbgp.i_ep;
 	dbgp.serial->out = dbgp.o_ep;
 
-	dbgp.serial->in_desc = &i_desc;
-	dbgp.serial->out_desc = &o_desc;
+	dbgp.serial->in->desc = &i_desc;
+	dbgp.serial->out->desc = &o_desc;
 
 	if (gserial_setup(gadget, 1) < 0) {
 		stp = 3;
@@ -312,7 +314,6 @@ static int __init dbgp_bind(struct usb_gadget *gadget)
 
 	dbgp.req->length = DBGP_REQ_EP0_LEN;
 	gadget->ep0->driver_data = gadget;
-	device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
 
 #ifdef CONFIG_USB_G_DBGP_SERIAL
 	dbgp.serial = kzalloc(sizeof(struct gserial), GFP_KERNEL);
@@ -363,6 +364,7 @@ static int dbgp_setup(struct usb_gadget *gadget,
 			dev_dbg(&dbgp.gadget->dev, "setup: desc device\n");
 			len = sizeof device_desc;
 			data = &device_desc;
+			device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
 			break;
 		case USB_DT_DEBUG:
 			dev_dbg(&dbgp.gadget->dev, "setup: desc debug\n");
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index d3dcabc1a5f..e755a9d267f 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -70,6 +70,19 @@ MODULE_DESCRIPTION (DRIVER_DESC);
 MODULE_AUTHOR ("David Brownell");
 MODULE_LICENSE ("GPL");
 
+struct dummy_hcd_module_parameters {
+	bool is_super_speed;
+	bool is_high_speed;
+};
+
+static struct dummy_hcd_module_parameters mod_data = {
+	.is_super_speed = false,
+	.is_high_speed = true,
+};
+module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO);
+MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection");
+module_param_named(is_high_speed, mod_data.is_high_speed, bool, S_IRUGO);
+MODULE_PARM_DESC(is_high_speed, "true to simulate HighSpeed connection");
 /*-------------------------------------------------------------------------*/
 
 /* gadget side driver data structres */
@@ -152,6 +165,22 @@ enum dummy_rh_state {
 	DUMMY_RH_RUNNING
 };
 
+struct dummy_hcd {
+	struct dummy			*dum;
+	enum dummy_rh_state		rh_state;
+	struct timer_list		timer;
+	u32				port_status;
+	u32				old_status;
+	unsigned long			re_timeout;
+
+	struct usb_device		*udev;
+	struct list_head		urbp_list;
+
+	unsigned			active:1;
+	unsigned			old_active:1;
+	unsigned			resuming:1;
+};
+
 struct dummy {
 	spinlock_t			lock;
 
@@ -167,36 +196,27 @@ struct dummy {
 	u16				devstatus;
 	unsigned			udc_suspended:1;
 	unsigned			pullup:1;
-	unsigned			active:1;
-	unsigned			old_active:1;
 
 	/*
 	 * MASTER/HOST side support
 	 */
-	enum dummy_rh_state		rh_state;
-	struct timer_list		timer;
-	u32				port_status;
-	u32				old_status;
-	unsigned			resuming:1;
-	unsigned long			re_timeout;
-
-	struct usb_device		*udev;
-	struct list_head		urbp_list;
+	struct dummy_hcd		*hs_hcd;
+	struct dummy_hcd		*ss_hcd;
 };
 
-static inline struct dummy *hcd_to_dummy (struct usb_hcd *hcd)
+static inline struct dummy_hcd *hcd_to_dummy_hcd(struct usb_hcd *hcd)
 {
-	return (struct dummy *) (hcd->hcd_priv);
+	return (struct dummy_hcd *) (hcd->hcd_priv);
 }
 
-static inline struct usb_hcd *dummy_to_hcd (struct dummy *dum)
+static inline struct usb_hcd *dummy_hcd_to_hcd(struct dummy_hcd *dum)
 {
 	return container_of((void *) dum, struct usb_hcd, hcd_priv);
 }
 
-static inline struct device *dummy_dev (struct dummy *dum)
+static inline struct device *dummy_dev(struct dummy_hcd *dum)
 {
-	return dummy_to_hcd(dum)->self.controller;
+	return dummy_hcd_to_hcd(dum)->self.controller;
 }
 
 static inline struct device *udc_dev (struct dummy *dum)
@@ -209,9 +229,13 @@ static inline struct dummy *ep_to_dummy (struct dummy_ep *ep)
 	return container_of (ep->gadget, struct dummy, gadget);
 }
 
-static inline struct dummy *gadget_to_dummy (struct usb_gadget *gadget)
+static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget)
 {
-	return container_of (gadget, struct dummy, gadget);
+	struct dummy *dum = container_of(gadget, struct dummy, gadget);
+	if (dum->gadget.speed == USB_SPEED_SUPER)
+		return dum->ss_hcd;
+	else
+		return dum->hs_hcd;
 }
 
 static inline struct dummy *gadget_dev_to_dummy (struct device *dev)
@@ -219,7 +243,7 @@ static inline struct dummy *gadget_dev_to_dummy (struct device *dev)
 	return container_of (dev, struct dummy, gadget.dev);
 }
 
-static struct dummy			*the_controller;
+static struct dummy			the_controller;
 
 /*-------------------------------------------------------------------------*/
 
@@ -259,61 +283,122 @@ stop_activity (struct dummy *dum)
 	/* driver now does any non-usb quiescing necessary */
 }
 
-/* caller must hold lock */
-static void
-set_link_state (struct dummy *dum)
-{
-	dum->active = 0;
-	if ((dum->port_status & USB_PORT_STAT_POWER) == 0)
-		dum->port_status = 0;
-
-	/* UDC suspend must cause a disconnect */
-	else if (!dum->pullup || dum->udc_suspended) {
-		dum->port_status &= ~(USB_PORT_STAT_CONNECTION |
-					USB_PORT_STAT_ENABLE |
-					USB_PORT_STAT_LOW_SPEED |
-					USB_PORT_STAT_HIGH_SPEED |
-					USB_PORT_STAT_SUSPEND);
-		if ((dum->old_status & USB_PORT_STAT_CONNECTION) != 0)
-			dum->port_status |= (USB_PORT_STAT_C_CONNECTION << 16);
+/**
+ * set_link_state_by_speed() - Sets the current state of the link according to
+ *	the hcd speed
+ * @dum_hcd: pointer to the dummy_hcd structure to update the link state for
+ *
+ * This function updates the port_status according to the link state and the
+ * speed of the hcd.
+ */
+static void set_link_state_by_speed(struct dummy_hcd *dum_hcd)
+{
+	struct dummy *dum = dum_hcd->dum;
+
+	if (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3) {
+		if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) == 0) {
+			dum_hcd->port_status = 0;
+		} else if (!dum->pullup || dum->udc_suspended) {
+			/* UDC suspend must cause a disconnect */
+			dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION |
+						USB_PORT_STAT_ENABLE);
+			if ((dum_hcd->old_status &
+			     USB_PORT_STAT_CONNECTION) != 0)
+				dum_hcd->port_status |=
+					(USB_PORT_STAT_C_CONNECTION << 16);
+		} else {
+			/* device is connected and not suspended */
+			dum_hcd->port_status |= (USB_PORT_STAT_CONNECTION |
+						 USB_PORT_STAT_SPEED_5GBPS) ;
+			if ((dum_hcd->old_status &
+			     USB_PORT_STAT_CONNECTION) == 0)
+				dum_hcd->port_status |=
+					(USB_PORT_STAT_C_CONNECTION << 16);
+			if ((dum_hcd->port_status &
+			     USB_PORT_STAT_ENABLE) == 1 &&
+				(dum_hcd->port_status &
+				 USB_SS_PORT_LS_U0) == 1 &&
+				dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
+				dum_hcd->active = 1;
+		}
 	} else {
-		dum->port_status |= USB_PORT_STAT_CONNECTION;
-		if ((dum->old_status & USB_PORT_STAT_CONNECTION) == 0)
-			dum->port_status |= (USB_PORT_STAT_C_CONNECTION << 16);
-		if ((dum->port_status & USB_PORT_STAT_ENABLE) == 0)
-			dum->port_status &= ~USB_PORT_STAT_SUSPEND;
-		else if ((dum->port_status & USB_PORT_STAT_SUSPEND) == 0 &&
-				dum->rh_state != DUMMY_RH_SUSPENDED)
-			dum->active = 1;
+		if ((dum_hcd->port_status & USB_PORT_STAT_POWER) == 0) {
+			dum_hcd->port_status = 0;
+		} else if (!dum->pullup || dum->udc_suspended) {
+			/* UDC suspend must cause a disconnect */
+			dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION |
+						USB_PORT_STAT_ENABLE |
+						USB_PORT_STAT_LOW_SPEED |
+						USB_PORT_STAT_HIGH_SPEED |
+						USB_PORT_STAT_SUSPEND);
+			if ((dum_hcd->old_status &
+			     USB_PORT_STAT_CONNECTION) != 0)
+				dum_hcd->port_status |=
+					(USB_PORT_STAT_C_CONNECTION << 16);
+		} else {
+			dum_hcd->port_status |= USB_PORT_STAT_CONNECTION;
+			if ((dum_hcd->old_status &
+			     USB_PORT_STAT_CONNECTION) == 0)
+				dum_hcd->port_status |=
+					(USB_PORT_STAT_C_CONNECTION << 16);
+			if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0)
+				dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
+			else if ((dum_hcd->port_status &
+				  USB_PORT_STAT_SUSPEND) == 0 &&
+					dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
+				dum_hcd->active = 1;
+		}
 	}
+}
+
+/* caller must hold lock */
+static void set_link_state(struct dummy_hcd *dum_hcd)
+{
+	struct dummy *dum = dum_hcd->dum;
 
-	if ((dum->port_status & USB_PORT_STAT_ENABLE) == 0 || dum->active)
-		dum->resuming = 0;
+	dum_hcd->active = 0;
+	if (dum->pullup)
+		if ((dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 &&
+		     dum->gadget.speed != USB_SPEED_SUPER) ||
+		    (dummy_hcd_to_hcd(dum_hcd)->speed != HCD_USB3 &&
+		     dum->gadget.speed == USB_SPEED_SUPER))
+			return;
 
-	if ((dum->port_status & USB_PORT_STAT_CONNECTION) == 0 ||
-			(dum->port_status & USB_PORT_STAT_RESET) != 0) {
-		if ((dum->old_status & USB_PORT_STAT_CONNECTION) != 0 &&
-				(dum->old_status & USB_PORT_STAT_RESET) == 0 &&
-				dum->driver) {
-			stop_activity (dum);
-			spin_unlock (&dum->lock);
-			dum->driver->disconnect (&dum->gadget);
-			spin_lock (&dum->lock);
+	set_link_state_by_speed(dum_hcd);
+
+	if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0 ||
+	     dum_hcd->active)
+		dum_hcd->resuming = 0;
+
+	/* if !connected or reset */
+	if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0 ||
+			(dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) {
+		/*
+		 * We're connected and not reset (reset occurred now),
+		 * and driver attached - disconnect!
+		 */
+		if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) != 0 &&
+		    (dum_hcd->old_status & USB_PORT_STAT_RESET) == 0 &&
+		    dum->driver) {
+			stop_activity(dum);
+			spin_unlock(&dum->lock);
+			dum->driver->disconnect(&dum->gadget);
+			spin_lock(&dum->lock);
 		}
-	} else if (dum->active != dum->old_active) {
-		if (dum->old_active && dum->driver->suspend) {
-			spin_unlock (&dum->lock);
-			dum->driver->suspend (&dum->gadget);
-			spin_lock (&dum->lock);
-		} else if (!dum->old_active && dum->driver->resume) {
-			spin_unlock (&dum->lock);
-			dum->driver->resume (&dum->gadget);
-			spin_lock (&dum->lock);
+	} else if (dum_hcd->active != dum_hcd->old_active) {
+		if (dum_hcd->old_active && dum->driver->suspend) {
+			spin_unlock(&dum->lock);
+			dum->driver->suspend(&dum->gadget);
+			spin_lock(&dum->lock);
+		} else if (!dum_hcd->old_active &&  dum->driver->resume) {
+			spin_unlock(&dum->lock);
+			dum->driver->resume(&dum->gadget);
+			spin_lock(&dum->lock);
 		}
 	}
 
-	dum->old_status = dum->port_status;
-	dum->old_active = dum->active;
+	dum_hcd->old_status = dum_hcd->port_status;
+	dum_hcd->old_active = dum_hcd->active;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -332,6 +417,7 @@ static int
 dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 {
 	struct dummy		*dum;
+	struct dummy_hcd	*dum_hcd;
 	struct dummy_ep		*ep;
 	unsigned		max;
 	int			retval;
@@ -341,9 +427,19 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 			|| desc->bDescriptorType != USB_DT_ENDPOINT)
 		return -EINVAL;
 	dum = ep_to_dummy (ep);
-	if (!dum->driver || !is_enabled (dum))
+	if (!dum->driver)
+		return -ESHUTDOWN;
+
+	dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
+	if (!is_enabled(dum_hcd))
 		return -ESHUTDOWN;
-	max = le16_to_cpu(desc->wMaxPacketSize) & 0x3ff;
+
+	/*
+	 * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the
+	 * maximum packet size.
+	 * For SS devices the wMaxPacketSize is limited by 1024.
+	 */
+	max = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
 
 	/* drivers must not request bad settings, since lower levels
 	 * (hardware or its drivers) may not check.  some endpoints
@@ -361,6 +457,10 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 			goto done;
 		}
 		switch (dum->gadget.speed) {
+		case USB_SPEED_SUPER:
+			if (max == 1024)
+				break;
+			goto done;
 		case USB_SPEED_HIGH:
 			if (max == 512)
 				break;
@@ -379,6 +479,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 			goto done;
 		/* real hardware might not handle all packet sizes */
 		switch (dum->gadget.speed) {
+		case USB_SPEED_SUPER:
 		case USB_SPEED_HIGH:
 			if (max <= 1024)
 				break;
@@ -399,6 +500,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 			goto done;
 		/* real hardware might not handle all packet sizes */
 		switch (dum->gadget.speed) {
+		case USB_SPEED_SUPER:
 		case USB_SPEED_HIGH:
 			if (max <= 1024)
 				break;
@@ -425,10 +527,18 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		(desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
 		({ char *val;
 		 switch (desc->bmAttributes & 0x03) {
-		 case USB_ENDPOINT_XFER_BULK: val = "bulk"; break;
-		 case USB_ENDPOINT_XFER_ISOC: val = "iso"; break;
-		 case USB_ENDPOINT_XFER_INT: val = "intr"; break;
-		 default: val = "ctrl"; break;
+		 case USB_ENDPOINT_XFER_BULK:
+			 val = "bulk";
+			 break;
+		 case USB_ENDPOINT_XFER_ISOC:
+			 val = "iso";
+			 break;
+		 case USB_ENDPOINT_XFER_INT:
+			 val = "intr";
+			 break;
+		 default:
+			 val = "ctrl";
+			 break;
 		 }; val; }),
 		max);
 
@@ -507,6 +617,7 @@ dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
 	struct dummy_ep		*ep;
 	struct dummy_request	*req;
 	struct dummy		*dum;
+	struct dummy_hcd	*dum_hcd;
 	unsigned long		flags;
 
 	req = usb_request_to_dummy_request (_req);
@@ -518,7 +629,8 @@ dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
 		return -EINVAL;
 
 	dum = ep_to_dummy (ep);
-	if (!dum->driver || !is_enabled (dum))
+	dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
+	if (!dum->driver || !is_enabled(dum_hcd))
 		return -ESHUTDOWN;
 
 #if 0
@@ -662,24 +774,24 @@ static int dummy_g_get_frame (struct usb_gadget *_gadget)
 
 static int dummy_wakeup (struct usb_gadget *_gadget)
 {
-	struct dummy	*dum;
+	struct dummy_hcd *dum_hcd;
 
-	dum = gadget_to_dummy (_gadget);
-	if (!(dum->devstatus &	( (1 << USB_DEVICE_B_HNP_ENABLE)
+	dum_hcd = gadget_to_dummy_hcd(_gadget);
+	if (!(dum_hcd->dum->devstatus & ((1 << USB_DEVICE_B_HNP_ENABLE)
 				| (1 << USB_DEVICE_REMOTE_WAKEUP))))
 		return -EINVAL;
-	if ((dum->port_status & USB_PORT_STAT_CONNECTION) == 0)
+	if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0)
 		return -ENOLINK;
-	if ((dum->port_status & USB_PORT_STAT_SUSPEND) == 0 &&
-			 dum->rh_state != DUMMY_RH_SUSPENDED)
+	if ((dum_hcd->port_status & USB_PORT_STAT_SUSPEND) == 0 &&
+			 dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
 		return -EIO;
 
 	/* FIXME: What if the root hub is suspended but the port isn't? */
 
 	/* hub notices our request, issues downstream resume, etc */
-	dum->resuming = 1;
-	dum->re_timeout = jiffies + msecs_to_jiffies(20);
-	mod_timer (&dummy_to_hcd (dum)->rh_timer, dum->re_timeout);
+	dum_hcd->resuming = 1;
+	dum_hcd->re_timeout = jiffies + msecs_to_jiffies(20);
+	mod_timer(&dummy_hcd_to_hcd(dum_hcd)->rh_timer, dum_hcd->re_timeout);
 	return 0;
 }
 
@@ -687,7 +799,7 @@ static int dummy_set_selfpowered (struct usb_gadget *_gadget, int value)
 {
 	struct dummy	*dum;
 
-	dum = gadget_to_dummy (_gadget);
+	dum = (gadget_to_dummy_hcd(_gadget))->dum;
 	if (value)
 		dum->devstatus |= (1 << USB_DEVICE_SELF_POWERED);
 	else
@@ -695,26 +807,68 @@ static int dummy_set_selfpowered (struct usb_gadget *_gadget, int value)
 	return 0;
 }
 
+static void dummy_udc_udpate_ep0(struct dummy *dum)
+{
+	u32 i;
+
+	if (dum->gadget.speed == USB_SPEED_SUPER) {
+		for (i = 0; i < DUMMY_ENDPOINTS; i++)
+			dum->ep[i].ep.max_streams = 0x10;
+		dum->ep[0].ep.maxpacket = 9;
+	} else {
+		for (i = 0; i < DUMMY_ENDPOINTS; i++)
+			dum->ep[i].ep.max_streams = 0;
+		dum->ep[0].ep.maxpacket = 64;
+	}
+}
+
 static int dummy_pullup (struct usb_gadget *_gadget, int value)
 {
+	struct dummy_hcd *dum_hcd;
 	struct dummy	*dum;
 	unsigned long	flags;
 
-	dum = gadget_to_dummy (_gadget);
+	dum = gadget_dev_to_dummy(&_gadget->dev);
+
+	if (value && dum->driver) {
+		if (mod_data.is_super_speed)
+			dum->gadget.speed = dum->driver->speed;
+		else if (mod_data.is_high_speed)
+			dum->gadget.speed = min_t(u8, USB_SPEED_HIGH,
+					dum->driver->speed);
+		else
+			dum->gadget.speed = USB_SPEED_FULL;
+		dummy_udc_udpate_ep0(dum);
+
+		if (dum->gadget.speed < dum->driver->speed)
+			dev_dbg(udc_dev(dum), "This device can perform faster"
+					" if you connect it to a %s port...\n",
+					(dum->driver->speed == USB_SPEED_SUPER ?
+					 "SuperSpeed" : "HighSpeed"));
+	}
+	dum_hcd = gadget_to_dummy_hcd(_gadget);
+
 	spin_lock_irqsave (&dum->lock, flags);
 	dum->pullup = (value != 0);
-	set_link_state (dum);
+	set_link_state(dum_hcd);
 	spin_unlock_irqrestore (&dum->lock, flags);
 
-	usb_hcd_poll_rh_status (dummy_to_hcd (dum));
+	usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
 	return 0;
 }
 
+static int dummy_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int dummy_udc_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+
 static const struct usb_gadget_ops dummy_ops = {
 	.get_frame	= dummy_g_get_frame,
 	.wakeup		= dummy_wakeup,
 	.set_selfpowered = dummy_set_selfpowered,
 	.pullup		= dummy_pullup,
+	.udc_start	= dummy_udc_start,
+	.udc_stop	= dummy_udc_stop,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -747,18 +901,13 @@ static DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
  * for each driver that registers:  just add to a big root hub.
  */
 
-int
-usb_gadget_probe_driver(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int dummy_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
 {
-	struct dummy	*dum = the_controller;
-	int		retval, i;
+	struct dummy_hcd	*dum_hcd = gadget_to_dummy_hcd(g);
+	struct dummy		*dum = dum_hcd->dum;
 
-	if (!dum)
-		return -EINVAL;
-	if (dum->driver)
-		return -EBUSY;
-	if (!bind || !driver->setup || driver->speed == USB_SPEED_UNKNOWN)
+	if (driver->speed == USB_SPEED_UNKNOWN)
 		return -EINVAL;
 
 	/*
@@ -768,121 +917,77 @@ usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 
 	dum->devstatus = 0;
 
-	INIT_LIST_HEAD (&dum->gadget.ep_list);
-	for (i = 0; i < DUMMY_ENDPOINTS; i++) {
-		struct dummy_ep	*ep = &dum->ep [i];
-
-		if (!ep_name [i])
-			break;
-		ep->ep.name = ep_name [i];
-		ep->ep.ops = &dummy_ep_ops;
-		list_add_tail (&ep->ep.ep_list, &dum->gadget.ep_list);
-		ep->halted = ep->wedged = ep->already_seen =
-				ep->setup_stage = 0;
-		ep->ep.maxpacket = ~0;
-		ep->last_io = jiffies;
-		ep->gadget = &dum->gadget;
-		ep->desc = NULL;
-		INIT_LIST_HEAD (&ep->queue);
-	}
-
-	dum->gadget.ep0 = &dum->ep [0].ep;
-	dum->ep [0].ep.maxpacket = 64;
-	list_del_init (&dum->ep [0].ep.ep_list);
-	INIT_LIST_HEAD(&dum->fifo_req.queue);
-
-	driver->driver.bus = NULL;
 	dum->driver = driver;
-	dum->gadget.dev.driver = &driver->driver;
 	dev_dbg (udc_dev(dum), "binding gadget driver '%s'\n",
 			driver->driver.name);
-	retval = bind(&dum->gadget);
-	if (retval) {
-		dum->driver = NULL;
-		dum->gadget.dev.driver = NULL;
-		return retval;
-	}
-
-	/* khubd will enumerate this in a while */
-	spin_lock_irq (&dum->lock);
-	dum->pullup = 1;
-	set_link_state (dum);
-	spin_unlock_irq (&dum->lock);
-
-	usb_hcd_poll_rh_status (dummy_to_hcd (dum));
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int
-usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
+static int dummy_udc_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
 {
-	struct dummy	*dum = the_controller;
-	unsigned long	flags;
-
-	if (!dum)
-		return -ENODEV;
-	if (!driver || driver != dum->driver || !driver->unbind)
-		return -EINVAL;
+	struct dummy_hcd	*dum_hcd = gadget_to_dummy_hcd(g);
+	struct dummy		*dum = dum_hcd->dum;
 
 	dev_dbg (udc_dev(dum), "unregister gadget driver '%s'\n",
 			driver->driver.name);
 
-	spin_lock_irqsave (&dum->lock, flags);
-	dum->pullup = 0;
-	set_link_state (dum);
-	spin_unlock_irqrestore (&dum->lock, flags);
-
-	driver->unbind (&dum->gadget);
-	dum->gadget.dev.driver = NULL;
 	dum->driver = NULL;
 
-	spin_lock_irqsave (&dum->lock, flags);
-	dum->pullup = 0;
-	set_link_state (dum);
-	spin_unlock_irqrestore (&dum->lock, flags);
-
-	usb_hcd_poll_rh_status (dummy_to_hcd (dum));
+	dummy_pullup(&dum->gadget, 0);
 	return 0;
 }
-EXPORT_SYMBOL (usb_gadget_unregister_driver);
 
 #undef is_enabled
 
-/* just declare this in any driver that really need it */
-extern int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode);
-
-int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode)
-{
-	return -ENOSYS;
-}
-EXPORT_SYMBOL (net2280_set_fifo_mode);
-
-
 /* The gadget structure is stored inside the hcd structure and will be
  * released along with it. */
 static void
 dummy_gadget_release (struct device *dev)
 {
-	struct dummy	*dum = gadget_dev_to_dummy (dev);
+	return;
+}
+
+static void init_dummy_udc_hw(struct dummy *dum)
+{
+	int i;
+
+	INIT_LIST_HEAD(&dum->gadget.ep_list);
+	for (i = 0; i < DUMMY_ENDPOINTS; i++) {
+		struct dummy_ep	*ep = &dum->ep[i];
+
+		if (!ep_name[i])
+			break;
+		ep->ep.name = ep_name[i];
+		ep->ep.ops = &dummy_ep_ops;
+		list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list);
+		ep->halted = ep->wedged = ep->already_seen =
+				ep->setup_stage = 0;
+		ep->ep.maxpacket = ~0;
+		ep->last_io = jiffies;
+		ep->gadget = &dum->gadget;
+		ep->desc = NULL;
+		INIT_LIST_HEAD(&ep->queue);
+	}
+
+	dum->gadget.ep0 = &dum->ep[0].ep;
+	list_del_init(&dum->ep[0].ep.ep_list);
+	INIT_LIST_HEAD(&dum->fifo_req.queue);
 
-	usb_put_hcd (dummy_to_hcd (dum));
+#ifdef CONFIG_USB_OTG
+	dum->gadget.is_otg = 1;
+#endif
 }
 
 static int dummy_udc_probe (struct platform_device *pdev)
 {
-	struct dummy	*dum = the_controller;
+	struct dummy	*dum = &the_controller;
 	int		rc;
 
-	usb_get_hcd(dummy_to_hcd(dum));
-
 	dum->gadget.name = gadget_name;
 	dum->gadget.ops = &dummy_ops;
 	dum->gadget.is_dualspeed = 1;
 
-	/* maybe claim OTG support, though we won't complete HNP */
-	dum->gadget.is_otg = (dummy_to_hcd(dum)->self.otg_port != 0);
-
 	dev_set_name(&dum->gadget.dev, "gadget");
 	dum->gadget.dev.parent = &pdev->dev;
 	dum->gadget.dev.release = dummy_gadget_release;
@@ -892,11 +997,22 @@ static int dummy_udc_probe (struct platform_device *pdev)
 		return rc;
 	}
 
+	init_dummy_udc_hw(dum);
+
+	rc = usb_add_gadget_udc(&pdev->dev, &dum->gadget);
+	if (rc < 0)
+		goto err_udc;
+
 	rc = device_create_file (&dum->gadget.dev, &dev_attr_function);
 	if (rc < 0)
-		device_unregister (&dum->gadget.dev);
-	else
-		platform_set_drvdata(pdev, dum);
+		goto err_dev;
+	platform_set_drvdata(pdev, dum);
+	return rc;
+
+err_dev:
+	usb_del_gadget_udc(&dum->gadget);
+err_udc:
+	device_unregister(&dum->gadget.dev);
 	return rc;
 }
 
@@ -904,37 +1020,41 @@ static int dummy_udc_remove (struct platform_device *pdev)
 {
 	struct dummy	*dum = platform_get_drvdata (pdev);
 
+	usb_del_gadget_udc(&dum->gadget);
 	platform_set_drvdata (pdev, NULL);
 	device_remove_file (&dum->gadget.dev, &dev_attr_function);
 	device_unregister (&dum->gadget.dev);
 	return 0;
 }
 
-static int dummy_udc_suspend (struct platform_device *pdev, pm_message_t state)
+static void dummy_udc_pm(struct dummy *dum, struct dummy_hcd *dum_hcd,
+		int suspend)
 {
-	struct dummy	*dum = platform_get_drvdata(pdev);
+	spin_lock_irq(&dum->lock);
+	dum->udc_suspended = suspend;
+	set_link_state(dum_hcd);
+	spin_unlock_irq(&dum->lock);
+}
 
-	dev_dbg (&pdev->dev, "%s\n", __func__);
-	spin_lock_irq (&dum->lock);
-	dum->udc_suspended = 1;
-	set_link_state (dum);
-	spin_unlock_irq (&dum->lock);
+static int dummy_udc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct dummy		*dum = platform_get_drvdata(pdev);
+	struct dummy_hcd	*dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
 
-	usb_hcd_poll_rh_status (dummy_to_hcd (dum));
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+	dummy_udc_pm(dum, dum_hcd, 1);
+	usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
 	return 0;
 }
 
-static int dummy_udc_resume (struct platform_device *pdev)
+static int dummy_udc_resume(struct platform_device *pdev)
 {
-	struct dummy	*dum = platform_get_drvdata(pdev);
+	struct dummy		*dum = platform_get_drvdata(pdev);
+	struct dummy_hcd	*dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
 
-	dev_dbg (&pdev->dev, "%s\n", __func__);
-	spin_lock_irq (&dum->lock);
-	dum->udc_suspended = 0;
-	set_link_state (dum);
-	spin_unlock_irq (&dum->lock);
-
-	usb_hcd_poll_rh_status (dummy_to_hcd (dum));
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+	dummy_udc_pm(dum, dum_hcd, 0);
+	usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
 	return 0;
 }
 
@@ -968,7 +1088,7 @@ static int dummy_urb_enqueue (
 	struct urb			*urb,
 	gfp_t				mem_flags
 ) {
-	struct dummy	*dum;
+	struct dummy_hcd *dum_hcd;
 	struct urbp	*urbp;
 	unsigned long	flags;
 	int		rc;
@@ -981,51 +1101,51 @@ static int dummy_urb_enqueue (
 		return -ENOMEM;
 	urbp->urb = urb;
 
-	dum = hcd_to_dummy (hcd);
-	spin_lock_irqsave (&dum->lock, flags);
+	dum_hcd = hcd_to_dummy_hcd(hcd);
+	spin_lock_irqsave(&dum_hcd->dum->lock, flags);
 	rc = usb_hcd_link_urb_to_ep(hcd, urb);
 	if (rc) {
 		kfree(urbp);
 		goto done;
 	}
 
-	if (!dum->udev) {
-		dum->udev = urb->dev;
-		usb_get_dev (dum->udev);
-	} else if (unlikely (dum->udev != urb->dev))
-		dev_err (dummy_dev(dum), "usb_device address has changed!\n");
+	if (!dum_hcd->udev) {
+		dum_hcd->udev = urb->dev;
+		usb_get_dev(dum_hcd->udev);
+	} else if (unlikely(dum_hcd->udev != urb->dev))
+		dev_err(dummy_dev(dum_hcd), "usb_device address has changed!\n");
 
-	list_add_tail (&urbp->urbp_list, &dum->urbp_list);
+	list_add_tail(&urbp->urbp_list, &dum_hcd->urbp_list);
 	urb->hcpriv = urbp;
 	if (usb_pipetype (urb->pipe) == PIPE_CONTROL)
 		urb->error_count = 1;		/* mark as a new urb */
 
 	/* kick the scheduler, it'll do the rest */
-	if (!timer_pending (&dum->timer))
-		mod_timer (&dum->timer, jiffies + 1);
+	if (!timer_pending(&dum_hcd->timer))
+		mod_timer(&dum_hcd->timer, jiffies + 1);
 
  done:
-	spin_unlock_irqrestore(&dum->lock, flags);
+	spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
 	return rc;
 }
 
 static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 {
-	struct dummy	*dum;
+	struct dummy_hcd *dum_hcd;
 	unsigned long	flags;
 	int		rc;
 
 	/* giveback happens automatically in timer callback,
 	 * so make sure the callback happens */
-	dum = hcd_to_dummy (hcd);
-	spin_lock_irqsave (&dum->lock, flags);
+	dum_hcd = hcd_to_dummy_hcd(hcd);
+	spin_lock_irqsave(&dum_hcd->dum->lock, flags);
 
 	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
-	if (!rc && dum->rh_state != DUMMY_RH_RUNNING &&
-			!list_empty(&dum->urbp_list))
-		mod_timer (&dum->timer, jiffies);
+	if (!rc && dum_hcd->rh_state != DUMMY_RH_RUNNING &&
+			!list_empty(&dum_hcd->urbp_list))
+		mod_timer(&dum_hcd->timer, jiffies);
 
-	spin_unlock_irqrestore (&dum->lock, flags);
+	spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
 	return rc;
 }
 
@@ -1162,10 +1282,25 @@ static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep)
 		tmp *= 8 /* applies to entire frame */;
 		limit += limit * tmp;
 	}
+	if (dum->gadget.speed == USB_SPEED_SUPER) {
+		switch (ep->desc->bmAttributes & 0x03) {
+		case USB_ENDPOINT_XFER_ISOC:
+			/* Sec. 4.4.8.2 USB3.0 Spec */
+			limit = 3 * 16 * 1024 * 8;
+			break;
+		case USB_ENDPOINT_XFER_INT:
+			/* Sec. 4.4.7.2 USB3.0 Spec */
+			limit = 3 * 1024 * 8;
+			break;
+		case USB_ENDPOINT_XFER_BULK:
+		default:
+			break;
+		}
+	}
 	return limit;
 }
 
-#define is_active(dum)	((dum->port_status & \
+#define is_active(dum_hcd)	((dum_hcd->port_status & \
 		(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE | \
 			USB_PORT_STAT_SUSPEND)) \
 		== (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE))
@@ -1174,7 +1309,8 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
 {
 	int		i;
 
-	if (!is_active (dum))
+	if (!is_active((dum->gadget.speed == USB_SPEED_SUPER ?
+			dum->ss_hcd : dum->hs_hcd)))
 		return NULL;
 	if ((address & ~USB_DIR_IN) == 0)
 		return &dum->ep [0];
@@ -1211,11 +1347,12 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
  *	  1 - if the request wasn't handles
  *	  error code on error
  */
-static int handle_control_request(struct dummy *dum, struct urb *urb,
+static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb,
 				  struct usb_ctrlrequest *setup,
 				  int *status)
 {
 	struct dummy_ep		*ep2;
+	struct dummy		*dum = dum_hcd->dum;
 	int			ret_val = 1;
 	unsigned	w_index;
 	unsigned	w_value;
@@ -1247,6 +1384,27 @@ static int handle_control_request(struct dummy *dum, struct urb *urb,
 			case USB_DEVICE_A_ALT_HNP_SUPPORT:
 				dum->gadget.a_alt_hnp_support = 1;
 				break;
+			case USB_DEVICE_U1_ENABLE:
+				if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+				    HCD_USB3)
+					w_value = USB_DEV_STAT_U1_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			case USB_DEVICE_U2_ENABLE:
+				if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+				    HCD_USB3)
+					w_value = USB_DEV_STAT_U2_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			case USB_DEVICE_LTM_ENABLE:
+				if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+				    HCD_USB3)
+					w_value = USB_DEV_STAT_LTM_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
 			default:
 				ret_val = -EOPNOTSUPP;
 			}
@@ -1273,6 +1431,27 @@ static int handle_control_request(struct dummy *dum, struct urb *urb,
 			case USB_DEVICE_REMOTE_WAKEUP:
 				w_value = USB_DEVICE_REMOTE_WAKEUP;
 				break;
+			case USB_DEVICE_U1_ENABLE:
+				if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+				    HCD_USB3)
+					w_value = USB_DEV_STAT_U1_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			case USB_DEVICE_U2_ENABLE:
+				if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+				    HCD_USB3)
+					w_value = USB_DEV_STAT_U2_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
+			case USB_DEVICE_LTM_ENABLE:
+				if (dummy_hcd_to_hcd(dum_hcd)->speed ==
+				    HCD_USB3)
+					w_value = USB_DEV_STAT_LTM_ENABLED;
+				else
+					ret_val = -EOPNOTSUPP;
+				break;
 			default:
 				ret_val = -EOPNOTSUPP;
 				break;
@@ -1334,9 +1513,10 @@ static int handle_control_request(struct dummy *dum, struct urb *urb,
 /* drive both sides of the transfers; looks like irq handlers to
  * both drivers except the callbacks aren't in_irq().
  */
-static void dummy_timer (unsigned long _dum)
+static void dummy_timer(unsigned long _dum_hcd)
 {
-	struct dummy		*dum = (struct dummy *) _dum;
+	struct dummy_hcd	*dum_hcd = (struct dummy_hcd *) _dum_hcd;
+	struct dummy		*dum = dum_hcd->dum;
 	struct urbp		*urbp, *tmp;
 	unsigned long		flags;
 	int			limit, total;
@@ -1353,8 +1533,12 @@ static void dummy_timer (unsigned long _dum)
 	case USB_SPEED_HIGH:
 		total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/;
 		break;
+	case USB_SPEED_SUPER:
+		/* Bus speed is 500000 bytes/ms, so use a little less */
+		total = 490000;
+		break;
 	default:
-		dev_err (dummy_dev(dum), "bogus device speed\n");
+		dev_err(dummy_dev(dum_hcd), "bogus device speed\n");
 		return;
 	}
 
@@ -1363,8 +1547,8 @@ static void dummy_timer (unsigned long _dum)
 	/* look at each urb queued by the host side driver */
 	spin_lock_irqsave (&dum->lock, flags);
 
-	if (!dum->udev) {
-		dev_err (dummy_dev(dum),
+	if (!dum_hcd->udev) {
+		dev_err(dummy_dev(dum_hcd),
 				"timer fired with no URBs pending?\n");
 		spin_unlock_irqrestore (&dum->lock, flags);
 		return;
@@ -1377,7 +1561,7 @@ static void dummy_timer (unsigned long _dum)
 	}
 
 restart:
-	list_for_each_entry_safe (urbp, tmp, &dum->urbp_list, urbp_list) {
+	list_for_each_entry_safe(urbp, tmp, &dum_hcd->urbp_list, urbp_list) {
 		struct urb		*urb;
 		struct dummy_request	*req;
 		u8			address;
@@ -1388,7 +1572,7 @@ restart:
 		urb = urbp->urb;
 		if (urb->unlinked)
 			goto return_urb;
-		else if (dum->rh_state != DUMMY_RH_RUNNING)
+		else if (dum_hcd->rh_state != DUMMY_RH_RUNNING)
 			continue;
 		type = usb_pipetype (urb->pipe);
 
@@ -1406,7 +1590,7 @@ restart:
 		ep = find_endpoint(dum, address);
 		if (!ep) {
 			/* set_configuration() disagreement */
-			dev_dbg (dummy_dev(dum),
+			dev_dbg(dummy_dev(dum_hcd),
 				"no ep configured for urb %p\n",
 				urb);
 			status = -EPROTO;
@@ -1422,7 +1606,7 @@ restart:
 		}
 		if (ep->halted && !ep->setup_stage) {
 			/* NOTE: must not be iso! */
-			dev_dbg (dummy_dev(dum), "ep %s halted, urb %p\n",
+			dev_dbg(dummy_dev(dum_hcd), "ep %s halted, urb %p\n",
 					ep->ep.name, urb);
 			status = -EPIPE;
 			goto return_urb;
@@ -1457,7 +1641,7 @@ restart:
 			ep->setup_stage = 0;
 			ep->halted = 0;
 
-			value = handle_control_request(dum, urb, &setup,
+			value = handle_control_request(dum_hcd, urb, &setup,
 						       &status);
 
 			/* gadget driver handles all other requests.  block
@@ -1527,20 +1711,20 @@ return_urb:
 		if (ep)
 			ep->already_seen = ep->setup_stage = 0;
 
-		usb_hcd_unlink_urb_from_ep(dummy_to_hcd(dum), urb);
+		usb_hcd_unlink_urb_from_ep(dummy_hcd_to_hcd(dum_hcd), urb);
 		spin_unlock (&dum->lock);
-		usb_hcd_giveback_urb(dummy_to_hcd(dum), urb, status);
+		usb_hcd_giveback_urb(dummy_hcd_to_hcd(dum_hcd), urb, status);
 		spin_lock (&dum->lock);
 
 		goto restart;
 	}
 
-	if (list_empty (&dum->urbp_list)) {
-		usb_put_dev (dum->udev);
-		dum->udev = NULL;
-	} else if (dum->rh_state == DUMMY_RH_RUNNING) {
+	if (list_empty(&dum_hcd->urbp_list)) {
+		usb_put_dev(dum_hcd->udev);
+		dum_hcd->udev = NULL;
+	} else if (dum_hcd->rh_state == DUMMY_RH_RUNNING) {
 		/* want a 1 msec delay here */
-		mod_timer (&dum->timer, jiffies + msecs_to_jiffies(1));
+		mod_timer(&dum_hcd->timer, jiffies + msecs_to_jiffies(1));
 	}
 
 	spin_unlock_irqrestore (&dum->lock, flags);
@@ -1557,36 +1741,48 @@ return_urb:
 
 static int dummy_hub_status (struct usb_hcd *hcd, char *buf)
 {
-	struct dummy		*dum;
+	struct dummy_hcd	*dum_hcd;
 	unsigned long		flags;
 	int			retval = 0;
 
-	dum = hcd_to_dummy (hcd);
+	dum_hcd = hcd_to_dummy_hcd(hcd);
 
-	spin_lock_irqsave (&dum->lock, flags);
+	spin_lock_irqsave(&dum_hcd->dum->lock, flags);
 	if (!HCD_HW_ACCESSIBLE(hcd))
 		goto done;
 
-	if (dum->resuming && time_after_eq (jiffies, dum->re_timeout)) {
-		dum->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
-		dum->port_status &= ~USB_PORT_STAT_SUSPEND;
-		set_link_state (dum);
+	if (dum_hcd->resuming && time_after_eq(jiffies, dum_hcd->re_timeout)) {
+		dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
+		dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
+		set_link_state(dum_hcd);
 	}
 
-	if ((dum->port_status & PORT_C_MASK) != 0) {
+	if ((dum_hcd->port_status & PORT_C_MASK) != 0) {
 		*buf = (1 << 1);
-		dev_dbg (dummy_dev(dum), "port status 0x%08x has changes\n",
-				dum->port_status);
+		dev_dbg(dummy_dev(dum_hcd), "port status 0x%08x has changes\n",
+				dum_hcd->port_status);
 		retval = 1;
-		if (dum->rh_state == DUMMY_RH_SUSPENDED)
+		if (dum_hcd->rh_state == DUMMY_RH_SUSPENDED)
 			usb_hcd_resume_root_hub (hcd);
 	}
 done:
-	spin_unlock_irqrestore (&dum->lock, flags);
+	spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
 	return retval;
 }
 
 static inline void
+ss_hub_descriptor(struct usb_hub_descriptor *desc)
+{
+	memset(desc, 0, sizeof *desc);
+	desc->bDescriptorType = 0x2a;
+	desc->bDescLength = 12;
+	desc->wHubCharacteristics = cpu_to_le16(0x0001);
+	desc->bNbrPorts = 1;
+	desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
+	desc->u.ss.DeviceRemovable = 0xffff;
+}
+
+static inline void
 hub_descriptor (struct usb_hub_descriptor *desc)
 {
 	memset (desc, 0, sizeof *desc);
@@ -1606,39 +1802,64 @@ static int dummy_hub_control (
 	char		*buf,
 	u16		wLength
 ) {
-	struct dummy	*dum;
+	struct dummy_hcd *dum_hcd;
 	int		retval = 0;
 	unsigned long	flags;
 
 	if (!HCD_HW_ACCESSIBLE(hcd))
 		return -ETIMEDOUT;
 
-	dum = hcd_to_dummy (hcd);
-	spin_lock_irqsave (&dum->lock, flags);
+	dum_hcd = hcd_to_dummy_hcd(hcd);
+
+	spin_lock_irqsave(&dum_hcd->dum->lock, flags);
 	switch (typeReq) {
 	case ClearHubFeature:
 		break;
 	case ClearPortFeature:
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
-			if (dum->port_status & USB_PORT_STAT_SUSPEND) {
+			if (hcd->speed == HCD_USB3) {
+				dev_dbg(dummy_dev(dum_hcd),
+					 "USB_PORT_FEAT_SUSPEND req not "
+					 "supported for USB 3.0 roothub\n");
+				goto error;
+			}
+			if (dum_hcd->port_status & USB_PORT_STAT_SUSPEND) {
 				/* 20msec resume signaling */
-				dum->resuming = 1;
-				dum->re_timeout = jiffies +
+				dum_hcd->resuming = 1;
+				dum_hcd->re_timeout = jiffies +
 						msecs_to_jiffies(20);
 			}
 			break;
 		case USB_PORT_FEAT_POWER:
-			if (dum->port_status & USB_PORT_STAT_POWER)
-				dev_dbg (dummy_dev(dum), "power-off\n");
+			if (hcd->speed == HCD_USB3) {
+				if (dum_hcd->port_status & USB_PORT_STAT_POWER)
+					dev_dbg(dummy_dev(dum_hcd),
+						"power-off\n");
+			} else
+				if (dum_hcd->port_status &
+							USB_SS_PORT_STAT_POWER)
+					dev_dbg(dummy_dev(dum_hcd),
+						"power-off\n");
 			/* FALLS THROUGH */
 		default:
-			dum->port_status &= ~(1 << wValue);
-			set_link_state (dum);
+			dum_hcd->port_status &= ~(1 << wValue);
+			set_link_state(dum_hcd);
 		}
 		break;
 	case GetHubDescriptor:
-		hub_descriptor ((struct usb_hub_descriptor *) buf);
+		if (hcd->speed == HCD_USB3 &&
+				(wLength < USB_DT_SS_HUB_SIZE ||
+				 wValue != (USB_DT_SS_HUB << 8))) {
+			dev_dbg(dummy_dev(dum_hcd),
+				"Wrong hub descriptor type for "
+				"USB 3.0 roothub.\n");
+			goto error;
+		}
+		if (hcd->speed == HCD_USB3)
+			ss_hub_descriptor((struct usb_hub_descriptor *) buf);
+		else
+			hub_descriptor((struct usb_hub_descriptor *) buf);
 		break;
 	case GetHubStatus:
 		*(__le32 *) buf = cpu_to_le32 (0);
@@ -1650,127 +1871,210 @@ static int dummy_hub_control (
 		/* whoever resets or resumes must GetPortStatus to
 		 * complete it!!
 		 */
-		if (dum->resuming &&
-				time_after_eq (jiffies, dum->re_timeout)) {
-			dum->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
-			dum->port_status &= ~USB_PORT_STAT_SUSPEND;
+		if (dum_hcd->resuming &&
+				time_after_eq(jiffies, dum_hcd->re_timeout)) {
+			dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
+			dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
 		}
-		if ((dum->port_status & USB_PORT_STAT_RESET) != 0 &&
-				time_after_eq (jiffies, dum->re_timeout)) {
-			dum->port_status |= (USB_PORT_STAT_C_RESET << 16);
-			dum->port_status &= ~USB_PORT_STAT_RESET;
-			if (dum->pullup) {
-				dum->port_status |= USB_PORT_STAT_ENABLE;
-				/* give it the best speed we agree on */
-				dum->gadget.speed = dum->driver->speed;
-				dum->gadget.ep0->maxpacket = 64;
-				switch (dum->gadget.speed) {
-				case USB_SPEED_HIGH:
-					dum->port_status |=
-						USB_PORT_STAT_HIGH_SPEED;
-					break;
-				case USB_SPEED_LOW:
-					dum->gadget.ep0->maxpacket = 8;
-					dum->port_status |=
-						USB_PORT_STAT_LOW_SPEED;
-					break;
-				default:
-					dum->gadget.speed = USB_SPEED_FULL;
-					break;
+		if ((dum_hcd->port_status & USB_PORT_STAT_RESET) != 0 &&
+				time_after_eq(jiffies, dum_hcd->re_timeout)) {
+			dum_hcd->port_status |= (USB_PORT_STAT_C_RESET << 16);
+			dum_hcd->port_status &= ~USB_PORT_STAT_RESET;
+			if (dum_hcd->dum->pullup) {
+				dum_hcd->port_status |= USB_PORT_STAT_ENABLE;
+
+				if (hcd->speed < HCD_USB3) {
+					switch (dum_hcd->dum->gadget.speed) {
+					case USB_SPEED_HIGH:
+						dum_hcd->port_status |=
+						      USB_PORT_STAT_HIGH_SPEED;
+						break;
+					case USB_SPEED_LOW:
+						dum_hcd->dum->gadget.ep0->
+							maxpacket = 8;
+						dum_hcd->port_status |=
+							USB_PORT_STAT_LOW_SPEED;
+						break;
+					default:
+						dum_hcd->dum->gadget.speed =
+							USB_SPEED_FULL;
+						break;
+					}
 				}
 			}
 		}
-		set_link_state (dum);
-		((__le16 *) buf)[0] = cpu_to_le16 (dum->port_status);
-		((__le16 *) buf)[1] = cpu_to_le16 (dum->port_status >> 16);
+		set_link_state(dum_hcd);
+		((__le16 *) buf)[0] = cpu_to_le16 (dum_hcd->port_status);
+		((__le16 *) buf)[1] = cpu_to_le16 (dum_hcd->port_status >> 16);
 		break;
 	case SetHubFeature:
 		retval = -EPIPE;
 		break;
 	case SetPortFeature:
 		switch (wValue) {
+		case USB_PORT_FEAT_LINK_STATE:
+			if (hcd->speed != HCD_USB3) {
+				dev_dbg(dummy_dev(dum_hcd),
+					 "USB_PORT_FEAT_LINK_STATE req not "
+					 "supported for USB 2.0 roothub\n");
+				goto error;
+			}
+			/*
+			 * Since this is dummy we don't have an actual link so
+			 * there is nothing to do for the SET_LINK_STATE cmd
+			 */
+			break;
+		case USB_PORT_FEAT_U1_TIMEOUT:
+		case USB_PORT_FEAT_U2_TIMEOUT:
+			/* TODO: add suspend/resume support! */
+			if (hcd->speed != HCD_USB3) {
+				dev_dbg(dummy_dev(dum_hcd),
+					 "USB_PORT_FEAT_U1/2_TIMEOUT req not "
+					 "supported for USB 2.0 roothub\n");
+				goto error;
+			}
+			break;
 		case USB_PORT_FEAT_SUSPEND:
-			if (dum->active) {
-				dum->port_status |= USB_PORT_STAT_SUSPEND;
+			/* Applicable only for USB2.0 hub */
+			if (hcd->speed == HCD_USB3) {
+				dev_dbg(dummy_dev(dum_hcd),
+					 "USB_PORT_FEAT_SUSPEND req not "
+					 "supported for USB 3.0 roothub\n");
+				goto error;
+			}
+			if (dum_hcd->active) {
+				dum_hcd->port_status |= USB_PORT_STAT_SUSPEND;
 
 				/* HNP would happen here; for now we
 				 * assume b_bus_req is always true.
 				 */
-				set_link_state (dum);
+				set_link_state(dum_hcd);
 				if (((1 << USB_DEVICE_B_HNP_ENABLE)
-						& dum->devstatus) != 0)
-					dev_dbg (dummy_dev(dum),
+						& dum_hcd->dum->devstatus) != 0)
+					dev_dbg(dummy_dev(dum_hcd),
 							"no HNP yet!\n");
 			}
 			break;
 		case USB_PORT_FEAT_POWER:
-			dum->port_status |= USB_PORT_STAT_POWER;
-			set_link_state (dum);
+			if (hcd->speed == HCD_USB3)
+				dum_hcd->port_status |= USB_SS_PORT_STAT_POWER;
+			else
+				dum_hcd->port_status |= USB_PORT_STAT_POWER;
+			set_link_state(dum_hcd);
 			break;
+		case USB_PORT_FEAT_BH_PORT_RESET:
+			/* Applicable only for USB3.0 hub */
+			if (hcd->speed != HCD_USB3) {
+				dev_dbg(dummy_dev(dum_hcd),
+					 "USB_PORT_FEAT_BH_PORT_RESET req not "
+					 "supported for USB 2.0 roothub\n");
+				goto error;
+			}
+			/* FALLS THROUGH */
 		case USB_PORT_FEAT_RESET:
 			/* if it's already enabled, disable */
-			dum->port_status &= ~(USB_PORT_STAT_ENABLE
+			if (hcd->speed == HCD_USB3) {
+				dum_hcd->port_status = 0;
+				dum_hcd->port_status =
+					(USB_SS_PORT_STAT_POWER |
+					 USB_PORT_STAT_CONNECTION |
+					 USB_PORT_STAT_RESET);
+			} else
+				dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE
 					| USB_PORT_STAT_LOW_SPEED
 					| USB_PORT_STAT_HIGH_SPEED);
-			dum->devstatus = 0;
-			/* 50msec reset signaling */
-			dum->re_timeout = jiffies + msecs_to_jiffies(50);
+			/*
+			 * We want to reset device status. All but the
+			 * Self powered feature
+			 */
+			dum_hcd->dum->devstatus &=
+				(1 << USB_DEVICE_SELF_POWERED);
+			/*
+			 * FIXME USB3.0: what is the correct reset signaling
+			 * interval? Is it still 50msec as for HS?
+			 */
+			dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
 			/* FALLS THROUGH */
 		default:
-			if ((dum->port_status & USB_PORT_STAT_POWER) != 0) {
-				dum->port_status |= (1 << wValue);
-				set_link_state (dum);
-			}
+			if (hcd->speed == HCD_USB3) {
+				if ((dum_hcd->port_status &
+				     USB_SS_PORT_STAT_POWER) != 0) {
+					dum_hcd->port_status |= (1 << wValue);
+					set_link_state(dum_hcd);
+				}
+			} else
+				if ((dum_hcd->port_status &
+				     USB_PORT_STAT_POWER) != 0) {
+					dum_hcd->port_status |= (1 << wValue);
+					set_link_state(dum_hcd);
+				}
+		}
+		break;
+	case GetPortErrorCount:
+		if (hcd->speed != HCD_USB3) {
+			dev_dbg(dummy_dev(dum_hcd),
+				 "GetPortErrorCount req not "
+				 "supported for USB 2.0 roothub\n");
+			goto error;
+		}
+		/* We'll always return 0 since this is a dummy hub */
+		*(__le32 *) buf = cpu_to_le32(0);
+		break;
+	case SetHubDepth:
+		if (hcd->speed != HCD_USB3) {
+			dev_dbg(dummy_dev(dum_hcd),
+				 "SetHubDepth req not supported for "
+				 "USB 2.0 roothub\n");
+			goto error;
 		}
 		break;
-
 	default:
-		dev_dbg (dummy_dev(dum),
+		dev_dbg(dummy_dev(dum_hcd),
 			"hub control req%04x v%04x i%04x l%d\n",
 			typeReq, wValue, wIndex, wLength);
-
+error:
 		/* "protocol stall" on error */
 		retval = -EPIPE;
 	}
-	spin_unlock_irqrestore (&dum->lock, flags);
+	spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
 
-	if ((dum->port_status & PORT_C_MASK) != 0)
+	if ((dum_hcd->port_status & PORT_C_MASK) != 0)
 		usb_hcd_poll_rh_status (hcd);
 	return retval;
 }
 
 static int dummy_bus_suspend (struct usb_hcd *hcd)
 {
-	struct dummy *dum = hcd_to_dummy (hcd);
+	struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
 
 	dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__);
 
-	spin_lock_irq (&dum->lock);
-	dum->rh_state = DUMMY_RH_SUSPENDED;
-	set_link_state (dum);
+	spin_lock_irq(&dum_hcd->dum->lock);
+	dum_hcd->rh_state = DUMMY_RH_SUSPENDED;
+	set_link_state(dum_hcd);
 	hcd->state = HC_STATE_SUSPENDED;
-	spin_unlock_irq (&dum->lock);
+	spin_unlock_irq(&dum_hcd->dum->lock);
 	return 0;
 }
 
 static int dummy_bus_resume (struct usb_hcd *hcd)
 {
-	struct dummy *dum = hcd_to_dummy (hcd);
+	struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
 	int rc = 0;
 
 	dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__);
 
-	spin_lock_irq (&dum->lock);
+	spin_lock_irq(&dum_hcd->dum->lock);
 	if (!HCD_HW_ACCESSIBLE(hcd)) {
 		rc = -ESHUTDOWN;
 	} else {
-		dum->rh_state = DUMMY_RH_RUNNING;
-		set_link_state (dum);
-		if (!list_empty(&dum->urbp_list))
-			mod_timer (&dum->timer, jiffies);
+		dum_hcd->rh_state = DUMMY_RH_RUNNING;
+		set_link_state(dum_hcd);
+		if (!list_empty(&dum_hcd->urbp_list))
+			mod_timer(&dum_hcd->timer, jiffies);
 		hcd->state = HC_STATE_RUNNING;
 	}
-	spin_unlock_irq (&dum->lock);
+	spin_unlock_irq(&dum_hcd->dum->lock);
 	return rc;
 }
 
@@ -1786,18 +2090,37 @@ show_urb (char *buf, size_t size, struct urb *urb)
 		urb,
 		({ char *s;
 		 switch (urb->dev->speed) {
-		 case USB_SPEED_LOW:	s = "ls"; break;
-		 case USB_SPEED_FULL:	s = "fs"; break;
-		 case USB_SPEED_HIGH:	s = "hs"; break;
-		 default:		s = "?"; break;
+		 case USB_SPEED_LOW:
+			s = "ls";
+			break;
+		 case USB_SPEED_FULL:
+			s = "fs";
+			break;
+		 case USB_SPEED_HIGH:
+			s = "hs";
+			break;
+		 case USB_SPEED_SUPER:
+			s = "ss";
+			break;
+		 default:
+			s = "?";
+			break;
 		 }; s; }),
 		ep, ep ? (usb_pipein (urb->pipe) ? "in" : "out") : "",
 		({ char *s; \
 		 switch (usb_pipetype (urb->pipe)) { \
-		 case PIPE_CONTROL:	s = ""; break; \
-		 case PIPE_BULK:	s = "-bulk"; break; \
-		 case PIPE_INTERRUPT:	s = "-int"; break; \
-		 default: 		s = "-iso"; break; \
+		 case PIPE_CONTROL: \
+			s = ""; \
+			break; \
+		 case PIPE_BULK: \
+			s = "-bulk"; \
+			break; \
+		 case PIPE_INTERRUPT: \
+			s = "-int"; \
+			break; \
+		 default: \
+			s = "-iso"; \
+			break; \
 		}; s;}),
 		urb->actual_length, urb->transfer_buffer_length);
 }
@@ -1806,43 +2129,63 @@ static ssize_t
 show_urbs (struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct usb_hcd		*hcd = dev_get_drvdata (dev);
-	struct dummy		*dum = hcd_to_dummy (hcd);
+	struct dummy_hcd	*dum_hcd = hcd_to_dummy_hcd(hcd);
 	struct urbp		*urbp;
 	size_t			size = 0;
 	unsigned long		flags;
 
-	spin_lock_irqsave (&dum->lock, flags);
-	list_for_each_entry (urbp, &dum->urbp_list, urbp_list) {
+	spin_lock_irqsave(&dum_hcd->dum->lock, flags);
+	list_for_each_entry(urbp, &dum_hcd->urbp_list, urbp_list) {
 		size_t		temp;
 
 		temp = show_urb (buf, PAGE_SIZE - size, urbp->urb);
 		buf += temp;
 		size += temp;
 	}
-	spin_unlock_irqrestore (&dum->lock, flags);
+	spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
 
 	return size;
 }
 static DEVICE_ATTR (urbs, S_IRUGO, show_urbs, NULL);
 
-static int dummy_start (struct usb_hcd *hcd)
+static int dummy_start_ss(struct dummy_hcd *dum_hcd)
 {
-	struct dummy		*dum;
+	init_timer(&dum_hcd->timer);
+	dum_hcd->timer.function = dummy_timer;
+	dum_hcd->timer.data = (unsigned long)dum_hcd;
+	dum_hcd->rh_state = DUMMY_RH_RUNNING;
+	INIT_LIST_HEAD(&dum_hcd->urbp_list);
+	dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET;
+	dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
+	dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
+#ifdef CONFIG_USB_OTG
+	dummy_hcd_to_hcd(dum_hcd)->self.otg_port = 1;
+#endif
+	return 0;
+
+	/* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
+	return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs);
+}
 
-	dum = hcd_to_dummy (hcd);
+static int dummy_start(struct usb_hcd *hcd)
+{
+	struct dummy_hcd	*dum_hcd = hcd_to_dummy_hcd(hcd);
 
 	/*
 	 * MASTER side init ... we emulate a root hub that'll only ever
 	 * talk to one device (the slave side).  Also appears in sysfs,
 	 * just like more familiar pci-based HCDs.
 	 */
-	spin_lock_init (&dum->lock);
-	init_timer (&dum->timer);
-	dum->timer.function = dummy_timer;
-	dum->timer.data = (unsigned long) dum;
-	dum->rh_state = DUMMY_RH_RUNNING;
+	if (!usb_hcd_is_primary_hcd(hcd))
+		return dummy_start_ss(dum_hcd);
 
-	INIT_LIST_HEAD (&dum->urbp_list);
+	spin_lock_init(&dum_hcd->dum->lock);
+	init_timer(&dum_hcd->timer);
+	dum_hcd->timer.function = dummy_timer;
+	dum_hcd->timer.data = (unsigned long)dum_hcd;
+	dum_hcd->rh_state = DUMMY_RH_RUNNING;
+
+	INIT_LIST_HEAD(&dum_hcd->urbp_list);
 
 	hcd->power_budget = POWER_BUDGET;
 	hcd->state = HC_STATE_RUNNING;
@@ -1853,18 +2196,17 @@ static int dummy_start (struct usb_hcd *hcd)
 #endif
 
 	/* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
-	return device_create_file (dummy_dev(dum), &dev_attr_urbs);
+	return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs);
 }
 
 static void dummy_stop (struct usb_hcd *hcd)
 {
 	struct dummy		*dum;
 
-	dum = hcd_to_dummy (hcd);
-
-	device_remove_file (dummy_dev(dum), &dev_attr_urbs);
-	usb_gadget_unregister_driver (dum->driver);
-	dev_info (dummy_dev(dum), "stopped\n");
+	dum = (hcd_to_dummy_hcd(hcd))->dum;
+	device_remove_file(dummy_dev(hcd_to_dummy_hcd(hcd)), &dev_attr_urbs);
+	usb_gadget_unregister_driver(dum->driver);
+	dev_info(dummy_dev(hcd_to_dummy_hcd(hcd)), "stopped\n");
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1874,13 +2216,59 @@ static int dummy_h_get_frame (struct usb_hcd *hcd)
 	return dummy_g_get_frame (NULL);
 }
 
-static const struct hc_driver dummy_hcd = {
+static int dummy_setup(struct usb_hcd *hcd)
+{
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		the_controller.hs_hcd = hcd_to_dummy_hcd(hcd);
+		the_controller.hs_hcd->dum = &the_controller;
+		/*
+		 * Mark the first roothub as being USB 2.0.
+		 * The USB 3.0 roothub will be registered later by
+		 * dummy_hcd_probe()
+		 */
+		hcd->speed = HCD_USB2;
+		hcd->self.root_hub->speed = USB_SPEED_HIGH;
+	} else {
+		the_controller.ss_hcd = hcd_to_dummy_hcd(hcd);
+		the_controller.ss_hcd->dum = &the_controller;
+		hcd->speed = HCD_USB3;
+		hcd->self.root_hub->speed = USB_SPEED_SUPER;
+	}
+	return 0;
+}
+
+/* Change a group of bulk endpoints to support multiple stream IDs */
+int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+	struct usb_host_endpoint **eps, unsigned int num_eps,
+	unsigned int num_streams, gfp_t mem_flags)
+{
+	if (hcd->speed != HCD_USB3)
+		dev_dbg(dummy_dev(hcd_to_dummy_hcd(hcd)),
+			"%s() - ERROR! Not supported for USB2.0 roothub\n",
+			__func__);
+	return 0;
+}
+
+/* Reverts a group of bulk endpoints back to not using stream IDs. */
+int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+	struct usb_host_endpoint **eps, unsigned int num_eps,
+	gfp_t mem_flags)
+{
+	if (hcd->speed != HCD_USB3)
+		dev_dbg(dummy_dev(hcd_to_dummy_hcd(hcd)),
+			"%s() - ERROR! Not supported for USB2.0 roothub\n",
+			__func__);
+	return 0;
+}
+
+static struct hc_driver dummy_hcd = {
 	.description =		(char *) driver_name,
 	.product_desc =		"Dummy host controller",
-	.hcd_priv_size =	sizeof(struct dummy),
+	.hcd_priv_size =	sizeof(struct dummy_hcd),
 
-	.flags =		HCD_USB2,
+	.flags =		HCD_USB3 | HCD_SHARED,
 
+	.reset =		dummy_setup,
 	.start =		dummy_start,
 	.stop =			dummy_stop,
 
@@ -1893,51 +2281,85 @@ static const struct hc_driver dummy_hcd = {
 	.hub_control = 		dummy_hub_control,
 	.bus_suspend =		dummy_bus_suspend,
 	.bus_resume =		dummy_bus_resume,
+
+	.alloc_streams =	dummy_alloc_streams,
+	.free_streams =		dummy_free_streams,
 };
 
 static int dummy_hcd_probe(struct platform_device *pdev)
 {
-	struct usb_hcd		*hcd;
+	struct usb_hcd		*hs_hcd;
+	struct usb_hcd		*ss_hcd;
 	int			retval;
 
 	dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);
 
-	hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev));
-	if (!hcd)
+	if (!mod_data.is_super_speed)
+		dummy_hcd.flags = HCD_USB2;
+	hs_hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev));
+	if (!hs_hcd)
 		return -ENOMEM;
-	the_controller = hcd_to_dummy (hcd);
-	hcd->has_tt = 1;
+	hs_hcd->has_tt = 1;
 
-	retval = usb_add_hcd(hcd, 0, 0);
+	retval = usb_add_hcd(hs_hcd, 0, 0);
 	if (retval != 0) {
-		usb_put_hcd (hcd);
-		the_controller = NULL;
+		usb_put_hcd(hs_hcd);
+		return retval;
+	}
+
+	if (mod_data.is_super_speed) {
+		ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev,
+					dev_name(&pdev->dev), hs_hcd);
+		if (!ss_hcd) {
+			retval = -ENOMEM;
+			goto dealloc_usb2_hcd;
+		}
+
+		retval = usb_add_hcd(ss_hcd, 0, 0);
+		if (retval)
+			goto put_usb3_hcd;
 	}
+	return 0;
+
+put_usb3_hcd:
+	usb_put_hcd(ss_hcd);
+dealloc_usb2_hcd:
+	usb_put_hcd(hs_hcd);
+	the_controller.hs_hcd = the_controller.ss_hcd = NULL;
 	return retval;
 }
 
-static int dummy_hcd_remove (struct platform_device *pdev)
+static int dummy_hcd_remove(struct platform_device *pdev)
 {
-	struct usb_hcd		*hcd;
+	struct dummy		*dum;
+
+	dum = (hcd_to_dummy_hcd(platform_get_drvdata(pdev)))->dum;
+
+	if (dum->ss_hcd) {
+		usb_remove_hcd(dummy_hcd_to_hcd(dum->ss_hcd));
+		usb_put_hcd(dummy_hcd_to_hcd(dum->ss_hcd));
+	}
+
+	usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
+	usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
+
+	the_controller.hs_hcd = NULL;
+	the_controller.ss_hcd = NULL;
 
-	hcd = platform_get_drvdata (pdev);
-	usb_remove_hcd (hcd);
-	usb_put_hcd (hcd);
-	the_controller = NULL;
 	return 0;
 }
 
 static int dummy_hcd_suspend (struct platform_device *pdev, pm_message_t state)
 {
 	struct usb_hcd		*hcd;
-	struct dummy		*dum;
+	struct dummy_hcd	*dum_hcd;
 	int			rc = 0;
 
 	dev_dbg (&pdev->dev, "%s\n", __func__);
 
 	hcd = platform_get_drvdata (pdev);
-	dum = hcd_to_dummy (hcd);
-	if (dum->rh_state == DUMMY_RH_RUNNING) {
+	dum_hcd = hcd_to_dummy_hcd(hcd);
+	if (dum_hcd->rh_state == DUMMY_RH_RUNNING) {
 		dev_warn(&pdev->dev, "Root hub isn't suspended!\n");
 		rc = -EBUSY;
 	} else
@@ -1980,6 +2402,9 @@ static int __init init (void)
 	if (usb_disabled ())
 		return -ENODEV;
 
+	if (!mod_data.is_high_speed && mod_data.is_super_speed)
+		return -EINVAL;
+
 	the_hcd_pdev = platform_device_alloc(driver_name, -1);
 	if (!the_hcd_pdev)
 		return retval;
@@ -1997,7 +2422,8 @@ static int __init init (void)
 	retval = platform_device_add(the_hcd_pdev);
 	if (retval < 0)
 		goto err_add_hcd;
-	if (!the_controller) {
+	if (!the_controller.hs_hcd ||
+	    (!the_controller.ss_hcd && mod_data.is_super_speed)) {
 		/*
 		 * The hcd was added successfully but its probe function failed
 		 * for some reason.
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 9b7360ff5aa..7a7e6b7e1fd 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -63,13 +63,16 @@ static int
 ep_matches (
 	struct usb_gadget		*gadget,
 	struct usb_ep			*ep,
-	struct usb_endpoint_descriptor	*desc
+	struct usb_endpoint_descriptor	*desc,
+	struct usb_ss_ep_comp_descriptor *ep_comp
 )
 {
 	u8		type;
 	const char	*tmp;
 	u16		max;
 
+	int		num_req_streams = 0;
+
 	/* endpoint already claimed? */
 	if (NULL != ep->driver_data)
 		return 0;
@@ -129,6 +132,22 @@ ep_matches (
 	}
 
 	/*
+	 * Get the number of required streams from the EP companion
+	 * descriptor and see if the EP matches it
+	 */
+	if (usb_endpoint_xfer_bulk(desc)) {
+		if (ep_comp) {
+			num_req_streams = ep_comp->bmAttributes & 0x1f;
+			if (num_req_streams > ep->max_streams)
+				return 0;
+			/* Update the ep_comp descriptor if needed */
+			if (num_req_streams != ep->max_streams)
+				ep_comp->bmAttributes = ep->max_streams;
+		}
+
+	}
+
+	/*
 	 * If the protocol driver hasn't yet decided on wMaxPacketSize
 	 * and wants to know the maximum possible, provide the info.
 	 */
@@ -142,13 +161,13 @@ ep_matches (
 	max = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
 	switch (type) {
 	case USB_ENDPOINT_XFER_INT:
-		/* INT:  limit 64 bytes full speed, 1024 high speed */
+		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
 		if (!gadget->is_dualspeed && max > 64)
 			return 0;
 		/* FALLTHROUGH */
 
 	case USB_ENDPOINT_XFER_ISOC:
-		/* ISO:  limit 1023 bytes full speed, 1024 high speed */
+		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
 		if (ep->maxpacket < max)
 			return 0;
 		if (!gadget->is_dualspeed && max > 1023)
@@ -183,7 +202,7 @@ ep_matches (
 	}
 
 	/* report (variable) full speed bulk maxpacket */
-	if (USB_ENDPOINT_XFER_BULK == type) {
+	if ((USB_ENDPOINT_XFER_BULK == type) && !ep_comp) {
 		int size = ep->maxpacket;
 
 		/* min() doesn't work on bitfields with gcc-3.5 */
@@ -191,6 +210,7 @@ ep_matches (
 			size = 64;
 		desc->wMaxPacketSize = cpu_to_le16(size);
 	}
+	ep->address = desc->bEndpointAddress;
 	return 1;
 }
 
@@ -207,38 +227,53 @@ find_ep (struct usb_gadget *gadget, const char *name)
 }
 
 /**
- * usb_ep_autoconfig - choose an endpoint matching the descriptor
+ * usb_ep_autoconfig_ss() - choose an endpoint matching the ep
+ * descriptor and ep companion descriptor
  * @gadget: The device to which the endpoint must belong.
  * @desc: Endpoint descriptor, with endpoint direction and transfer mode
- *	initialized.  For periodic transfers, the maximum packet
- *	size must also be initialized.  This is modified on success.
+ *    initialized.  For periodic transfers, the maximum packet
+ *    size must also be initialized.  This is modified on
+ *    success.
+ * @ep_comp: Endpoint companion descriptor, with the required
+ *    number of streams. Will be modified when the chosen EP
+ *    supports a different number of streams.
  *
- * By choosing an endpoint to use with the specified descriptor, this
- * routine simplifies writing gadget drivers that work with multiple
- * USB device controllers.  The endpoint would be passed later to
- * usb_ep_enable(), along with some descriptor.
+ * This routine replaces the usb_ep_autoconfig when needed
+ * superspeed enhancments. If such enhancemnets are required,
+ * the FD should call usb_ep_autoconfig_ss directly and provide
+ * the additional ep_comp parameter.
+ *
+ * By choosing an endpoint to use with the specified descriptor,
+ * this routine simplifies writing gadget drivers that work with
+ * multiple USB device controllers.  The endpoint would be
+ * passed later to usb_ep_enable(), along with some descriptor.
  *
  * That second descriptor won't always be the same as the first one.
  * For example, isochronous endpoints can be autoconfigured for high
  * bandwidth, and then used in several lower bandwidth altsettings.
  * Also, high and full speed descriptors will be different.
  *
- * Be sure to examine and test the results of autoconfiguration on your
- * hardware.  This code may not make the best choices about how to use the
- * USB controller, and it can't know all the restrictions that may apply.
- * Some combinations of driver and hardware won't be able to autoconfigure.
+ * Be sure to examine and test the results of autoconfiguration
+ * on your hardware.  This code may not make the best choices
+ * about how to use the USB controller, and it can't know all
+ * the restrictions that may apply. Some combinations of driver
+ * and hardware won't be able to autoconfigure.
  *
  * On success, this returns an un-claimed usb_ep, and modifies the endpoint
  * descriptor bEndpointAddress.  For bulk endpoints, the wMaxPacket value
- * is initialized as if the endpoint were used at full speed.  To prevent
- * the endpoint from being returned by a later autoconfig call, claim it
- * by assigning ep->driver_data to some non-null value.
+ * is initialized as if the endpoint were used at full speed and
+ * the bmAttribute field in the ep companion descriptor is
+ * updated with the assigned number of streams if it is
+ * different from the original value. To prevent the endpoint
+ * from being returned by a later autoconfig call, claim it by
+ * assigning ep->driver_data to some non-null value.
  *
  * On failure, this returns a null endpoint descriptor.
  */
-struct usb_ep *usb_ep_autoconfig (
+struct usb_ep *usb_ep_autoconfig_ss(
 	struct usb_gadget		*gadget,
-	struct usb_endpoint_descriptor	*desc
+	struct usb_endpoint_descriptor	*desc,
+	struct usb_ss_ep_comp_descriptor *ep_comp
 )
 {
 	struct usb_ep	*ep;
@@ -252,23 +287,24 @@ struct usb_ep *usb_ep_autoconfig (
 	if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) {
 		/* ep-e, ep-f are PIO with only 64 byte fifos */
 		ep = find_ep (gadget, "ep-e");
-		if (ep && ep_matches (gadget, ep, desc))
+		if (ep && ep_matches(gadget, ep, desc, ep_comp))
 			return ep;
 		ep = find_ep (gadget, "ep-f");
-		if (ep && ep_matches (gadget, ep, desc))
+		if (ep && ep_matches(gadget, ep, desc, ep_comp))
 			return ep;
 
 	} else if (gadget_is_goku (gadget)) {
 		if (USB_ENDPOINT_XFER_INT == type) {
 			/* single buffering is enough */
-			ep = find_ep (gadget, "ep3-bulk");
-			if (ep && ep_matches (gadget, ep, desc))
+			ep = find_ep(gadget, "ep3-bulk");
+			if (ep && ep_matches(gadget, ep, desc, ep_comp))
 				return ep;
 		} else if (USB_ENDPOINT_XFER_BULK == type
 				&& (USB_DIR_IN & desc->bEndpointAddress)) {
 			/* DMA may be available */
-			ep = find_ep (gadget, "ep2-bulk");
-			if (ep && ep_matches (gadget, ep, desc))
+			ep = find_ep(gadget, "ep2-bulk");
+			if (ep && ep_matches(gadget, ep, desc,
+					      ep_comp))
 				return ep;
 		}
 
@@ -287,14 +323,14 @@ struct usb_ep *usb_ep_autoconfig (
 				ep = find_ep(gadget, "ep2out");
 		} else
 			ep = NULL;
-		if (ep && ep_matches (gadget, ep, desc))
+		if (ep && ep_matches(gadget, ep, desc, ep_comp))
 			return ep;
 #endif
 	}
 
 	/* Second, look at endpoints until an unclaimed one looks usable */
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
-		if (ep_matches (gadget, ep, desc))
+		if (ep_matches(gadget, ep, desc, ep_comp))
 			return ep;
 	}
 
@@ -303,6 +339,46 @@ struct usb_ep *usb_ep_autoconfig (
 }
 
 /**
+ * usb_ep_autoconfig() - choose an endpoint matching the
+ * descriptor
+ * @gadget: The device to which the endpoint must belong.
+ * @desc: Endpoint descriptor, with endpoint direction and transfer mode
+ *	initialized.  For periodic transfers, the maximum packet
+ *	size must also be initialized.  This is modified on success.
+ *
+ * By choosing an endpoint to use with the specified descriptor, this
+ * routine simplifies writing gadget drivers that work with multiple
+ * USB device controllers.  The endpoint would be passed later to
+ * usb_ep_enable(), along with some descriptor.
+ *
+ * That second descriptor won't always be the same as the first one.
+ * For example, isochronous endpoints can be autoconfigured for high
+ * bandwidth, and then used in several lower bandwidth altsettings.
+ * Also, high and full speed descriptors will be different.
+ *
+ * Be sure to examine and test the results of autoconfiguration on your
+ * hardware.  This code may not make the best choices about how to use the
+ * USB controller, and it can't know all the restrictions that may apply.
+ * Some combinations of driver and hardware won't be able to autoconfigure.
+ *
+ * On success, this returns an un-claimed usb_ep, and modifies the endpoint
+ * descriptor bEndpointAddress.  For bulk endpoints, the wMaxPacket value
+ * is initialized as if the endpoint were used at full speed.  To prevent
+ * the endpoint from being returned by a later autoconfig call, claim it
+ * by assigning ep->driver_data to some non-null value.
+ *
+ * On failure, this returns a null endpoint descriptor.
+ */
+struct usb_ep *usb_ep_autoconfig(
+	struct usb_gadget		*gadget,
+	struct usb_endpoint_descriptor	*desc
+)
+{
+	return usb_ep_autoconfig_ss(gadget, desc, NULL);
+}
+
+
+/**
  * usb_ep_autoconfig_reset - reset endpoint autoconfig state
  * @gadget: device for which autoconfig state will be reset
  *
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 1690c9d6825..aafc84f33e2 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -401,6 +401,7 @@ static struct usb_composite_driver eth_driver = {
 	.name		= "g_ether",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_SUPER,
 	.unbind		= __exit_p(eth_unbind),
 };
 
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index bd6226cbae8..3f8849339ad 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -39,12 +39,6 @@
  * descriptors (roughly equivalent to CDC Unions) may sometimes help.
  */
 
-struct acm_ep_descs {
-	struct usb_endpoint_descriptor	*in;
-	struct usb_endpoint_descriptor	*out;
-	struct usb_endpoint_descriptor	*notify;
-};
-
 struct f_acm {
 	struct gserial			port;
 	u8				ctrl_id, data_id;
@@ -58,11 +52,7 @@ struct f_acm {
 	 */
 	spinlock_t			lock;
 
-	struct acm_ep_descs		fs;
-	struct acm_ep_descs		hs;
-
 	struct usb_ep			*notify;
-	struct usb_endpoint_descriptor	*notify_desc;
 	struct usb_request		*notify_req;
 
 	struct usb_cdc_line_coding	port_line_coding;	/* 8-N-1 etc */
@@ -405,23 +395,27 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 			usb_ep_disable(acm->notify);
 		} else {
 			VDBG(cdev, "init acm ctrl interface %d\n", intf);
-			acm->notify_desc = ep_choose(cdev->gadget,
-					acm->hs.notify,
-					acm->fs.notify);
+			if (config_ep_by_speed(cdev->gadget, f, acm->notify))
+				return -EINVAL;
 		}
-		usb_ep_enable(acm->notify, acm->notify_desc);
+		usb_ep_enable(acm->notify);
 		acm->notify->driver_data = acm;
 
 	} else if (intf == acm->data_id) {
 		if (acm->port.in->driver_data) {
 			DBG(cdev, "reset acm ttyGS%d\n", acm->port_num);
 			gserial_disconnect(&acm->port);
-		} else {
+		}
+		if (!acm->port.in->desc || !acm->port.out->desc) {
 			DBG(cdev, "activate acm ttyGS%d\n", acm->port_num);
-			acm->port.in_desc = ep_choose(cdev->gadget,
-					acm->hs.in, acm->fs.in);
-			acm->port.out_desc = ep_choose(cdev->gadget,
-					acm->hs.out, acm->fs.out);
+			if (config_ep_by_speed(cdev->gadget, f,
+					       acm->port.in) ||
+			    config_ep_by_speed(cdev->gadget, f,
+					       acm->port.out)) {
+				acm->port.in->desc = NULL;
+				acm->port.out->desc = NULL;
+				return -EINVAL;
+			}
 		}
 		gserial_connect(&acm->port, acm->port_num);
 
@@ -629,18 +623,11 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
 	acm->notify_req->complete = acm_cdc_notify_complete;
 	acm->notify_req->context = acm;
 
-	/* copy descriptors, and track endpoint copies */
+	/* copy descriptors */
 	f->descriptors = usb_copy_descriptors(acm_fs_function);
 	if (!f->descriptors)
 		goto fail;
 
-	acm->fs.in = usb_find_endpoint(acm_fs_function,
-			f->descriptors, &acm_fs_in_desc);
-	acm->fs.out = usb_find_endpoint(acm_fs_function,
-			f->descriptors, &acm_fs_out_desc);
-	acm->fs.notify = usb_find_endpoint(acm_fs_function,
-			f->descriptors, &acm_fs_notify_desc);
-
 	/* support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
 	 * both speeds
@@ -653,15 +640,8 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
 		acm_hs_notify_desc.bEndpointAddress =
 				acm_fs_notify_desc.bEndpointAddress;
 
-		/* copy descriptors, and track endpoint copies */
+		/* copy descriptors */
 		f->hs_descriptors = usb_copy_descriptors(acm_hs_function);
-
-		acm->hs.in = usb_find_endpoint(acm_hs_function,
-				f->hs_descriptors, &acm_hs_in_desc);
-		acm->hs.out = usb_find_endpoint(acm_hs_function,
-				f->hs_descriptors, &acm_hs_out_desc);
-		acm->hs.notify = usb_find_endpoint(acm_hs_function,
-				f->hs_descriptors, &acm_hs_notify_desc);
 	}
 
 	DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 8ee330a2ab5..02a02700b51 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -279,7 +279,6 @@ struct f_audio {
 
 	/* endpoints handle full and/or high speeds */
 	struct usb_ep			*out_ep;
-	struct usb_endpoint_descriptor	*out_desc;
 
 	spinlock_t			lock;
 	struct f_audio_buf *copy_buf;
@@ -575,7 +574,7 @@ static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 
 	if (intf == 1) {
 		if (alt == 1) {
-			usb_ep_enable(out_ep, audio->out_desc);
+			usb_ep_enable(out_ep);
 			out_ep->driver_data = audio;
 			audio->copy_buf = f_audio_buffer_alloc(audio_buf_size);
 			if (IS_ERR(audio->copy_buf))
@@ -677,6 +676,7 @@ f_audio_bind(struct usb_configuration *c, struct usb_function *f)
 	if (!ep)
 		goto fail;
 	audio->out_ep = ep;
+	audio->out_ep->desc = &as_out_ep_desc;
 	ep->driver_data = cdev;	/* claim */
 
 	status = -ENOMEM;
@@ -776,7 +776,6 @@ int __init audio_bind_config(struct usb_configuration *c)
 	audio->card.func.set_alt = f_audio_set_alt;
 	audio->card.func.setup = f_audio_setup;
 	audio->card.func.disable = f_audio_disable;
-	audio->out_desc = &as_out_ep_desc;
 
 	control_selector_init(audio);
 
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 544257a89ed..3691a0cb946 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -46,11 +46,6 @@
  * and also means that a get_alt() method is required.
  */
 
-struct ecm_ep_descs {
-	struct usb_endpoint_descriptor	*in;
-	struct usb_endpoint_descriptor	*out;
-	struct usb_endpoint_descriptor	*notify;
-};
 
 enum ecm_notify_state {
 	ECM_NOTIFY_NONE,		/* don't notify */
@@ -64,11 +59,7 @@ struct f_ecm {
 
 	char				ethaddr[14];
 
-	struct ecm_ep_descs		fs;
-	struct ecm_ep_descs		hs;
-
 	struct usb_ep			*notify;
-	struct usb_endpoint_descriptor	*notify_desc;
 	struct usb_request		*notify_req;
 	u8				notify_state;
 	bool				is_open;
@@ -86,10 +77,12 @@ static inline struct f_ecm *func_to_ecm(struct usb_function *f)
 /* peak (theoretical) bulk transfer rate in bits-per-second */
 static inline unsigned ecm_bitrate(struct usb_gadget *g)
 {
-	if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+	if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+		return 13 * 1024 * 8 * 1000 * 8;
+	else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
 		return 13 * 512 * 8 * 1000 * 8;
 	else
-		return 19 *  64 * 1 * 1000 * 8;
+		return 19 * 64 * 1 * 1000 * 8;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -219,8 +212,10 @@ static struct usb_descriptor_header *ecm_fs_function[] = {
 	(struct usb_descriptor_header *) &ecm_header_desc,
 	(struct usb_descriptor_header *) &ecm_union_desc,
 	(struct usb_descriptor_header *) &ecm_desc,
+
 	/* NOTE: status endpoint might need to be removed */
 	(struct usb_descriptor_header *) &fs_ecm_notify_desc,
+
 	/* data interface, altsettings 0 and 1 */
 	(struct usb_descriptor_header *) &ecm_data_nop_intf,
 	(struct usb_descriptor_header *) &ecm_data_intf,
@@ -240,6 +235,7 @@ static struct usb_endpoint_descriptor hs_ecm_notify_desc = {
 	.wMaxPacketSize =	cpu_to_le16(ECM_STATUS_BYTECOUNT),
 	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
 };
+
 static struct usb_endpoint_descriptor hs_ecm_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
@@ -264,8 +260,10 @@ static struct usb_descriptor_header *ecm_hs_function[] = {
 	(struct usb_descriptor_header *) &ecm_header_desc,
 	(struct usb_descriptor_header *) &ecm_union_desc,
 	(struct usb_descriptor_header *) &ecm_desc,
+
 	/* NOTE: status endpoint might need to be removed */
 	(struct usb_descriptor_header *) &hs_ecm_notify_desc,
+
 	/* data interface, altsettings 0 and 1 */
 	(struct usb_descriptor_header *) &ecm_data_nop_intf,
 	(struct usb_descriptor_header *) &ecm_data_intf,
@@ -274,6 +272,76 @@ static struct usb_descriptor_header *ecm_hs_function[] = {
 	NULL,
 };
 
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_ecm_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(ECM_STATUS_BYTECOUNT),
+	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ecm_intr_comp_desc = {
+	.bLength =		sizeof ss_ecm_intr_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 3 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+	.wBytesPerInterval =	cpu_to_le16(ECM_STATUS_BYTECOUNT),
+};
+
+static struct usb_endpoint_descriptor ss_ecm_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor ss_ecm_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ecm_bulk_comp_desc = {
+	.bLength =		sizeof ss_ecm_bulk_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 2 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+};
+
+static struct usb_descriptor_header *ecm_ss_function[] = {
+	/* CDC ECM control descriptors */
+	(struct usb_descriptor_header *) &ecm_control_intf,
+	(struct usb_descriptor_header *) &ecm_header_desc,
+	(struct usb_descriptor_header *) &ecm_union_desc,
+	(struct usb_descriptor_header *) &ecm_desc,
+
+	/* NOTE: status endpoint might need to be removed */
+	(struct usb_descriptor_header *) &ss_ecm_notify_desc,
+	(struct usb_descriptor_header *) &ss_ecm_intr_comp_desc,
+
+	/* data interface, altsettings 0 and 1 */
+	(struct usb_descriptor_header *) &ecm_data_nop_intf,
+	(struct usb_descriptor_header *) &ecm_data_intf,
+	(struct usb_descriptor_header *) &ss_ecm_in_desc,
+	(struct usb_descriptor_header *) &ss_ecm_bulk_comp_desc,
+	(struct usb_descriptor_header *) &ss_ecm_out_desc,
+	(struct usb_descriptor_header *) &ss_ecm_bulk_comp_desc,
+	NULL,
+};
+
 /* string descriptors: */
 
 static struct usb_string ecm_string_defs[] = {
@@ -464,13 +532,13 @@ static int ecm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		if (ecm->notify->driver_data) {
 			VDBG(cdev, "reset ecm control %d\n", intf);
 			usb_ep_disable(ecm->notify);
-		} else {
+		}
+		if (!(ecm->notify->desc)) {
 			VDBG(cdev, "init ecm ctrl %d\n", intf);
-			ecm->notify_desc = ep_choose(cdev->gadget,
-					ecm->hs.notify,
-					ecm->fs.notify);
+			if (config_ep_by_speed(cdev->gadget, f, ecm->notify))
+				goto fail;
 		}
-		usb_ep_enable(ecm->notify, ecm->notify_desc);
+		usb_ep_enable(ecm->notify);
 		ecm->notify->driver_data = ecm;
 
 	/* Data interface has two altsettings, 0 and 1 */
@@ -483,12 +551,17 @@ static int ecm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 			gether_disconnect(&ecm->port);
 		}
 
-		if (!ecm->port.in) {
+		if (!ecm->port.in_ep->desc ||
+		    !ecm->port.out_ep->desc) {
 			DBG(cdev, "init ecm\n");
-			ecm->port.in = ep_choose(cdev->gadget,
-					ecm->hs.in, ecm->fs.in);
-			ecm->port.out = ep_choose(cdev->gadget,
-					ecm->hs.out, ecm->fs.out);
+			if (config_ep_by_speed(cdev->gadget, f,
+					       ecm->port.in_ep) ||
+			    config_ep_by_speed(cdev->gadget, f,
+					       ecm->port.out_ep)) {
+				ecm->port.in_ep->desc = NULL;
+				ecm->port.out_ep->desc = NULL;
+				goto fail;
+			}
 		}
 
 		/* CDC Ethernet only sends data in non-default altsettings.
@@ -549,7 +622,7 @@ static void ecm_disable(struct usb_function *f)
 	if (ecm->notify->driver_data) {
 		usb_ep_disable(ecm->notify);
 		ecm->notify->driver_data = NULL;
-		ecm->notify_desc = NULL;
+		ecm->notify->desc = NULL;
 	}
 }
 
@@ -665,13 +738,6 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 	if (!f->descriptors)
 		goto fail;
 
-	ecm->fs.in = usb_find_endpoint(ecm_fs_function,
-			f->descriptors, &fs_ecm_in_desc);
-	ecm->fs.out = usb_find_endpoint(ecm_fs_function,
-			f->descriptors, &fs_ecm_out_desc);
-	ecm->fs.notify = usb_find_endpoint(ecm_fs_function,
-			f->descriptors, &fs_ecm_notify_desc);
-
 	/* support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
 	 * both speeds
@@ -688,13 +754,20 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 		f->hs_descriptors = usb_copy_descriptors(ecm_hs_function);
 		if (!f->hs_descriptors)
 			goto fail;
+	}
 
-		ecm->hs.in = usb_find_endpoint(ecm_hs_function,
-				f->hs_descriptors, &hs_ecm_in_desc);
-		ecm->hs.out = usb_find_endpoint(ecm_hs_function,
-				f->hs_descriptors, &hs_ecm_out_desc);
-		ecm->hs.notify = usb_find_endpoint(ecm_hs_function,
-				f->hs_descriptors, &hs_ecm_notify_desc);
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		ss_ecm_in_desc.bEndpointAddress =
+				fs_ecm_in_desc.bEndpointAddress;
+		ss_ecm_out_desc.bEndpointAddress =
+				fs_ecm_out_desc.bEndpointAddress;
+		ss_ecm_notify_desc.bEndpointAddress =
+				fs_ecm_notify_desc.bEndpointAddress;
+
+		/* copy descriptors, and track endpoint copies */
+		f->ss_descriptors = usb_copy_descriptors(ecm_ss_function);
+		if (!f->ss_descriptors)
+			goto fail;
 	}
 
 	/* NOTE:  all that is done without knowing or caring about
@@ -706,6 +779,7 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 	ecm->port.close = ecm_close;
 
 	DBG(cdev, "CDC Ethernet: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+			gadget_is_superspeed(c->cdev->gadget) ? "super" :
 			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
 			ecm->port.in_ep->name, ecm->port.out_ep->name,
 			ecm->notify->name);
@@ -714,6 +788,8 @@ ecm_bind(struct usb_configuration *c, struct usb_function *f)
 fail:
 	if (f->descriptors)
 		usb_free_descriptors(f->descriptors);
+	if (f->hs_descriptors)
+		usb_free_descriptors(f->hs_descriptors);
 
 	if (ecm->notify_req) {
 		kfree(ecm->notify_req->buf);
@@ -723,9 +799,9 @@ fail:
 	/* we might as well release our claims on endpoints */
 	if (ecm->notify)
 		ecm->notify->driver_data = NULL;
-	if (ecm->port.out)
+	if (ecm->port.out_ep->desc)
 		ecm->port.out_ep->driver_data = NULL;
-	if (ecm->port.in)
+	if (ecm->port.in_ep->desc)
 		ecm->port.in_ep->driver_data = NULL;
 
 	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -740,6 +816,8 @@ ecm_unbind(struct usb_configuration *c, struct usb_function *f)
 
 	DBG(c->cdev, "ecm unbind\n");
 
+	if (gadget_is_superspeed(c->cdev->gadget))
+		usb_free_descriptors(f->ss_descriptors);
 	if (gadget_is_dualspeed(c->cdev->gadget))
 		usb_free_descriptors(f->hs_descriptors);
 	usb_free_descriptors(f->descriptors);
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index b3c30429015..046c6d0e696 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -35,17 +35,9 @@
  * Ethernet link.
  */
 
-struct eem_ep_descs {
-	struct usb_endpoint_descriptor	*in;
-	struct usb_endpoint_descriptor	*out;
-};
-
 struct f_eem {
 	struct gether			port;
 	u8				ctrl_id;
-
-	struct eem_ep_descs		fs;
-	struct eem_ep_descs		hs;
 };
 
 static inline struct f_eem *func_to_eem(struct usb_function *f)
@@ -123,6 +115,45 @@ static struct usb_descriptor_header *eem_hs_function[] __initdata = {
 	NULL,
 };
 
+/* super speed support: */
+
+static struct usb_endpoint_descriptor eem_ss_in_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor eem_ss_out_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor eem_ss_bulk_comp_desc __initdata = {
+	.bLength =		sizeof eem_ss_bulk_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 2 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+};
+
+static struct usb_descriptor_header *eem_ss_function[] __initdata = {
+	/* CDC EEM control descriptors */
+	(struct usb_descriptor_header *) &eem_intf,
+	(struct usb_descriptor_header *) &eem_ss_in_desc,
+	(struct usb_descriptor_header *) &eem_ss_bulk_comp_desc,
+	(struct usb_descriptor_header *) &eem_ss_out_desc,
+	(struct usb_descriptor_header *) &eem_ss_bulk_comp_desc,
+	NULL,
+};
+
 /* string descriptors: */
 
 static struct usb_string eem_string_defs[] = {
@@ -176,12 +207,16 @@ static int eem_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 			gether_disconnect(&eem->port);
 		}
 
-		if (!eem->port.in) {
+		if (!eem->port.in_ep->desc || !eem->port.out_ep->desc) {
 			DBG(cdev, "init eem\n");
-			eem->port.in = ep_choose(cdev->gadget,
-					eem->hs.in, eem->fs.in);
-			eem->port.out = ep_choose(cdev->gadget,
-					eem->hs.out, eem->fs.out);
+			if (config_ep_by_speed(cdev->gadget, f,
+					       eem->port.in_ep) ||
+			    config_ep_by_speed(cdev->gadget, f,
+					       eem->port.out_ep)) {
+				eem->port.in_ep->desc = NULL;
+				eem->port.out_ep->desc = NULL;
+				goto fail;
+			}
 		}
 
 		/* zlps should not occur because zero-length EEM packets
@@ -253,11 +288,6 @@ eem_bind(struct usb_configuration *c, struct usb_function *f)
 	if (!f->descriptors)
 		goto fail;
 
-	eem->fs.in = usb_find_endpoint(eem_fs_function,
-			f->descriptors, &eem_fs_in_desc);
-	eem->fs.out = usb_find_endpoint(eem_fs_function,
-			f->descriptors, &eem_fs_out_desc);
-
 	/* support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
 	 * both speeds
@@ -272,14 +302,22 @@ eem_bind(struct usb_configuration *c, struct usb_function *f)
 		f->hs_descriptors = usb_copy_descriptors(eem_hs_function);
 		if (!f->hs_descriptors)
 			goto fail;
+	}
+
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		eem_ss_in_desc.bEndpointAddress =
+				eem_fs_in_desc.bEndpointAddress;
+		eem_ss_out_desc.bEndpointAddress =
+				eem_fs_out_desc.bEndpointAddress;
 
-		eem->hs.in = usb_find_endpoint(eem_hs_function,
-				f->hs_descriptors, &eem_hs_in_desc);
-		eem->hs.out = usb_find_endpoint(eem_hs_function,
-				f->hs_descriptors, &eem_hs_out_desc);
+		/* copy descriptors, and track endpoint copies */
+		f->ss_descriptors = usb_copy_descriptors(eem_ss_function);
+		if (!f->ss_descriptors)
+			goto fail;
 	}
 
 	DBG(cdev, "CDC Ethernet (EEM): %s speed IN/%s OUT/%s\n",
+			gadget_is_superspeed(c->cdev->gadget) ? "super" :
 			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
 			eem->port.in_ep->name, eem->port.out_ep->name);
 	return 0;
@@ -287,11 +325,13 @@ eem_bind(struct usb_configuration *c, struct usb_function *f)
 fail:
 	if (f->descriptors)
 		usb_free_descriptors(f->descriptors);
+	if (f->hs_descriptors)
+		usb_free_descriptors(f->hs_descriptors);
 
 	/* we might as well release our claims on endpoints */
-	if (eem->port.out)
+	if (eem->port.out_ep->desc)
 		eem->port.out_ep->driver_data = NULL;
-	if (eem->port.in)
+	if (eem->port.in_ep->desc)
 		eem->port.in_ep->driver_data = NULL;
 
 	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -306,6 +346,8 @@ eem_unbind(struct usb_configuration *c, struct usb_function *f)
 
 	DBG(c->cdev, "eem unbind\n");
 
+	if (gadget_is_superspeed(c->cdev->gadget))
+		usb_free_descriptors(f->ss_descriptors);
 	if (gadget_is_dualspeed(c->cdev->gadget))
 		usb_free_descriptors(f->hs_descriptors);
 	usb_free_descriptors(f->descriptors);
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 19fffccc370..c161a9aaeb7 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -1544,7 +1544,8 @@ static int ffs_func_eps_enable(struct ffs_function *func)
 		ds = ep->descs[ep->descs[1] ? 1 : 0];
 
 		ep->ep->driver_data = ep;
-		ret = usb_ep_enable(ep->ep, ds);
+		ep->ep->desc = ds;
+		ret = usb_ep_enable(ep->ep);
 		if (likely(!ret)) {
 			epfile->ep = ep;
 			epfile->in = usb_endpoint_dir_in(ds);
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 598e7e2ab80..403a48bcf56 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -59,8 +59,6 @@ struct f_hidg {
 	struct cdev			cdev;
 	struct usb_function		func;
 	struct usb_ep			*in_ep;
-	struct usb_endpoint_descriptor	*fs_in_ep_desc;
-	struct usb_endpoint_descriptor	*hs_in_ep_desc;
 };
 
 static inline struct f_hidg *func_to_hidg(struct usb_function *f)
@@ -416,7 +414,6 @@ static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 {
 	struct usb_composite_dev		*cdev = f->config->cdev;
 	struct f_hidg				*hidg = func_to_hidg(f);
-	const struct usb_endpoint_descriptor	*ep_desc;
 	int status = 0;
 
 	VDBG(cdev, "hidg_set_alt intf:%d alt:%d\n", intf, alt);
@@ -426,9 +423,13 @@ static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		if (hidg->in_ep->driver_data != NULL)
 			usb_ep_disable(hidg->in_ep);
 
-		ep_desc = ep_choose(f->config->cdev->gadget,
-				hidg->hs_in_ep_desc, hidg->fs_in_ep_desc);
-		status = usb_ep_enable(hidg->in_ep, ep_desc);
+		status = config_ep_by_speed(f->config->cdev->gadget, f,
+					    hidg->in_ep);
+		if (status) {
+			ERROR(cdev, "config_ep_by_speed FAILED!\n");
+			goto fail;
+		}
+		status = usb_ep_enable(hidg->in_ep);
 		if (status < 0) {
 			ERROR(cdev, "Enable endpoint FAILED!\n");
 			goto fail;
@@ -498,21 +499,12 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
 	if (!f->descriptors)
 		goto fail;
 
-	hidg->fs_in_ep_desc = usb_find_endpoint(hidg_fs_descriptors,
-						f->descriptors,
-						&hidg_fs_in_ep_desc);
-
 	if (gadget_is_dualspeed(c->cdev->gadget)) {
 		hidg_hs_in_ep_desc.bEndpointAddress =
 			hidg_fs_in_ep_desc.bEndpointAddress;
 		f->hs_descriptors = usb_copy_descriptors(hidg_hs_descriptors);
 		if (!f->hs_descriptors)
 			goto fail;
-		hidg->hs_in_ep_desc = usb_find_endpoint(hidg_hs_descriptors,
-							f->hs_descriptors,
-							&hidg_hs_in_ep_desc);
-	} else {
-		hidg->hs_in_ep_desc = NULL;
 	}
 
 	mutex_init(&hidg->lock);
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index b37960f9e75..ca660d40b11 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -118,6 +118,49 @@ static struct usb_descriptor_header *hs_loopback_descs[] = {
 	NULL,
 };
 
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_loop_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+struct usb_ss_ep_comp_descriptor ss_loop_source_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	0,
+};
+
+static struct usb_endpoint_descriptor ss_loop_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+struct usb_ss_ep_comp_descriptor ss_loop_sink_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	0,
+};
+
+static struct usb_descriptor_header *ss_loopback_descs[] = {
+	(struct usb_descriptor_header *) &loopback_intf,
+	(struct usb_descriptor_header *) &ss_loop_source_desc,
+	(struct usb_descriptor_header *) &ss_loop_source_comp_desc,
+	(struct usb_descriptor_header *) &ss_loop_sink_desc,
+	(struct usb_descriptor_header *) &ss_loop_sink_comp_desc,
+	NULL,
+};
+
 /* function-specific strings: */
 
 static struct usb_string strings_loopback[] = {
@@ -175,8 +218,18 @@ autoconf_fail:
 		f->hs_descriptors = hs_loopback_descs;
 	}
 
+	/* support super speed hardware */
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		ss_loop_source_desc.bEndpointAddress =
+				fs_loop_source_desc.bEndpointAddress;
+		ss_loop_sink_desc.bEndpointAddress =
+				fs_loop_sink_desc.bEndpointAddress;
+		f->ss_descriptors = ss_loopback_descs;
+	}
+
 	DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
-			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+	    (gadget_is_superspeed(c->cdev->gadget) ? "super" :
+	     (gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full")),
 			f->name, loop->in_ep->name, loop->out_ep->name);
 	return 0;
 }
@@ -250,26 +303,27 @@ static int
 enable_loopback(struct usb_composite_dev *cdev, struct f_loopback *loop)
 {
 	int					result = 0;
-	const struct usb_endpoint_descriptor	*src, *sink;
 	struct usb_ep				*ep;
 	struct usb_request			*req;
 	unsigned				i;
 
-	src = ep_choose(cdev->gadget,
-			&hs_loop_source_desc, &fs_loop_source_desc);
-	sink = ep_choose(cdev->gadget,
-			&hs_loop_sink_desc, &fs_loop_sink_desc);
-
 	/* one endpoint writes data back IN to the host */
 	ep = loop->in_ep;
-	result = usb_ep_enable(ep, src);
+	result = config_ep_by_speed(cdev->gadget, &(loop->function), ep);
+	if (result)
+		return result;
+	result = usb_ep_enable(ep);
 	if (result < 0)
 		return result;
 	ep->driver_data = loop;
 
 	/* one endpoint just reads OUT packets */
 	ep = loop->out_ep;
-	result = usb_ep_enable(ep, sink);
+	result = config_ep_by_speed(cdev->gadget, &(loop->function), ep);
+	if (result)
+		goto fail0;
+
+	result = usb_ep_enable(ep);
 	if (result < 0) {
 fail0:
 		ep = loop->in_ep;
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index efb58f9f5aa..5b933958200 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2324,18 +2324,6 @@ static int get_next_command(struct fsg_common *common)
 
 /*-------------------------------------------------------------------------*/
 
-static int enable_endpoint(struct fsg_common *common, struct usb_ep *ep,
-		const struct usb_endpoint_descriptor *d)
-{
-	int	rc;
-
-	ep->driver_data = common;
-	rc = usb_ep_enable(ep, d);
-	if (rc)
-		ERROR(common, "can't enable %s, result %d\n", ep->name, rc);
-	return rc;
-}
-
 static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
 		struct usb_request **preq)
 {
@@ -2349,7 +2337,6 @@ static int alloc_request(struct fsg_common *common, struct usb_ep *ep,
 /* Reset interface setting and re-init endpoint state (toggle etc). */
 static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg)
 {
-	const struct usb_endpoint_descriptor *d;
 	struct fsg_dev *fsg;
 	int i, rc = 0;
 
@@ -2396,20 +2383,26 @@ reset:
 	fsg = common->fsg;
 
 	/* Enable the endpoints */
-	d = fsg_ep_desc(common->gadget,
-			&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc);
-	rc = enable_endpoint(common, fsg->bulk_in, d);
+	rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in);
+	if (rc)
+		goto reset;
+	rc = usb_ep_enable(fsg->bulk_in);
 	if (rc)
 		goto reset;
+	fsg->bulk_in->driver_data = common;
 	fsg->bulk_in_enabled = 1;
 
-	d = fsg_ep_desc(common->gadget,
-			&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc);
-	rc = enable_endpoint(common, fsg->bulk_out, d);
+	rc = config_ep_by_speed(common->gadget, &(fsg->function),
+				fsg->bulk_out);
+	if (rc)
+		goto reset;
+	rc = usb_ep_enable(fsg->bulk_out);
 	if (rc)
 		goto reset;
+	fsg->bulk_out->driver_data = common;
 	fsg->bulk_out_enabled = 1;
-	common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
+	common->bulk_out_maxpacket =
+		le16_to_cpu(fsg->bulk_out->desc->wMaxPacketSize);
 	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
 
 	/* Allocate the requests */
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index 86902a60bcd..ae69ed7e6b9 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -48,12 +48,6 @@
 #define NCM_NDP_HDR_CRC		0x01000000
 #define NCM_NDP_HDR_NOCRC	0x00000000
 
-struct ncm_ep_descs {
-	struct usb_endpoint_descriptor	*in;
-	struct usb_endpoint_descriptor	*out;
-	struct usb_endpoint_descriptor	*notify;
-};
-
 enum ncm_notify_state {
 	NCM_NOTIFY_NONE,		/* don't notify */
 	NCM_NOTIFY_CONNECT,		/* issue CONNECT next */
@@ -66,11 +60,7 @@ struct f_ncm {
 
 	char				ethaddr[14];
 
-	struct ncm_ep_descs		fs;
-	struct ncm_ep_descs		hs;
-
 	struct usb_ep			*notify;
-	struct usb_endpoint_descriptor	*notify_desc;
 	struct usb_request		*notify_req;
 	u8				notify_state;
 	bool				is_open;
@@ -802,13 +792,14 @@ static int ncm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		if (ncm->notify->driver_data) {
 			DBG(cdev, "reset ncm control %d\n", intf);
 			usb_ep_disable(ncm->notify);
-		} else {
+		}
+
+		if (!(ncm->notify->desc)) {
 			DBG(cdev, "init ncm ctrl %d\n", intf);
-			ncm->notify_desc = ep_choose(cdev->gadget,
-					ncm->hs.notify,
-					ncm->fs.notify);
+			if (config_ep_by_speed(cdev->gadget, f, ncm->notify))
+				goto fail;
 		}
-		usb_ep_enable(ncm->notify, ncm->notify_desc);
+		usb_ep_enable(ncm->notify);
 		ncm->notify->driver_data = ncm;
 
 	/* Data interface has two altsettings, 0 and 1 */
@@ -829,14 +820,17 @@ static int ncm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		if (alt == 1) {
 			struct net_device	*net;
 
-			if (!ncm->port.in) {
+			if (!ncm->port.in_ep->desc ||
+			    !ncm->port.out_ep->desc) {
 				DBG(cdev, "init ncm\n");
-				ncm->port.in = ep_choose(cdev->gadget,
-							 ncm->hs.in,
-							 ncm->fs.in);
-				ncm->port.out = ep_choose(cdev->gadget,
-							  ncm->hs.out,
-							  ncm->fs.out);
+				if (config_ep_by_speed(cdev->gadget, f,
+						       ncm->port.in_ep) ||
+				    config_ep_by_speed(cdev->gadget, f,
+						       ncm->port.out_ep)) {
+					ncm->port.in_ep->desc = NULL;
+					ncm->port.out_ep->desc = NULL;
+					goto fail;
+				}
 			}
 
 			/* TODO */
@@ -1111,7 +1105,7 @@ static void ncm_disable(struct usb_function *f)
 	if (ncm->notify->driver_data) {
 		usb_ep_disable(ncm->notify);
 		ncm->notify->driver_data = NULL;
-		ncm->notify_desc = NULL;
+		ncm->notify->desc = NULL;
 	}
 }
 
@@ -1228,13 +1222,6 @@ ncm_bind(struct usb_configuration *c, struct usb_function *f)
 	if (!f->descriptors)
 		goto fail;
 
-	ncm->fs.in = usb_find_endpoint(ncm_fs_function,
-			f->descriptors, &fs_ncm_in_desc);
-	ncm->fs.out = usb_find_endpoint(ncm_fs_function,
-			f->descriptors, &fs_ncm_out_desc);
-	ncm->fs.notify = usb_find_endpoint(ncm_fs_function,
-			f->descriptors, &fs_ncm_notify_desc);
-
 	/*
 	 * support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
@@ -1252,13 +1239,6 @@ ncm_bind(struct usb_configuration *c, struct usb_function *f)
 		f->hs_descriptors = usb_copy_descriptors(ncm_hs_function);
 		if (!f->hs_descriptors)
 			goto fail;
-
-		ncm->hs.in = usb_find_endpoint(ncm_hs_function,
-				f->hs_descriptors, &hs_ncm_in_desc);
-		ncm->hs.out = usb_find_endpoint(ncm_hs_function,
-				f->hs_descriptors, &hs_ncm_out_desc);
-		ncm->hs.notify = usb_find_endpoint(ncm_hs_function,
-				f->hs_descriptors, &hs_ncm_notify_desc);
 	}
 
 	/*
@@ -1288,9 +1268,9 @@ fail:
 	/* we might as well release our claims on endpoints */
 	if (ncm->notify)
 		ncm->notify->driver_data = NULL;
-	if (ncm->port.out)
+	if (ncm->port.out_ep->desc)
 		ncm->port.out_ep->driver_data = NULL;
-	if (ncm->port.in)
+	if (ncm->port.in_ep->desc)
 		ncm->port.in_ep->driver_data = NULL;
 
 	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c
index 8f8c6437147..394502abeb9 100644
--- a/drivers/usb/gadget/f_obex.c
+++ b/drivers/usb/gadget/f_obex.c
@@ -39,20 +39,12 @@
  * ready to handle the commands.
  */
 
-struct obex_ep_descs {
-	struct usb_endpoint_descriptor	*obex_in;
-	struct usb_endpoint_descriptor	*obex_out;
-};
-
 struct f_obex {
 	struct gserial			port;
 	u8				ctrl_id;
 	u8				data_id;
 	u8				port_num;
 	u8				can_activate;
-
-	struct obex_ep_descs		fs;
-	struct obex_ep_descs		hs;
 };
 
 static inline struct f_obex *func_to_obex(struct usb_function *f)
@@ -227,12 +219,16 @@ static int obex_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 			gserial_disconnect(&obex->port);
 		}
 
-		if (!obex->port.in_desc) {
+		if (!obex->port.in->desc || !obex->port.out->desc) {
 			DBG(cdev, "init obex ttyGS%d\n", obex->port_num);
-			obex->port.in_desc = ep_choose(cdev->gadget,
-					obex->hs.obex_in, obex->fs.obex_in);
-			obex->port.out_desc = ep_choose(cdev->gadget,
-					obex->hs.obex_out, obex->fs.obex_out);
+			if (config_ep_by_speed(cdev->gadget, f,
+					       obex->port.in) ||
+			    config_ep_by_speed(cdev->gadget, f,
+					       obex->port.out)) {
+				obex->port.out->desc = NULL;
+				obex->port.in->desc = NULL;
+				goto fail;
+			}
 		}
 
 		if (alt == 1) {
@@ -346,11 +342,6 @@ obex_bind(struct usb_configuration *c, struct usb_function *f)
 	/* copy descriptors, and track endpoint copies */
 	f->descriptors = usb_copy_descriptors(fs_function);
 
-	obex->fs.obex_in = usb_find_endpoint(fs_function,
-			f->descriptors, &obex_fs_ep_in_desc);
-	obex->fs.obex_out = usb_find_endpoint(fs_function,
-			f->descriptors, &obex_fs_ep_out_desc);
-
 	/* support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
 	 * both speeds
@@ -364,11 +355,6 @@ obex_bind(struct usb_configuration *c, struct usb_function *f)
 
 		/* copy descriptors, and track endpoint copies */
 		f->hs_descriptors = usb_copy_descriptors(hs_function);
-
-		obex->hs.obex_in = usb_find_endpoint(hs_function,
-				f->hs_descriptors, &obex_hs_ep_in_desc);
-		obex->hs.obex_out = usb_find_endpoint(hs_function,
-				f->hs_descriptors, &obex_hs_ep_out_desc);
 	}
 
 	/* Avoid letting this gadget enumerate until the userspace
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index f22fc685ddf..8f8d3f6cd89 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -428,17 +428,16 @@ static int pn_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		spin_lock(&port->lock);
 		__pn_reset(f);
 		if (alt == 1) {
-			struct usb_endpoint_descriptor *out, *in;
 			int i;
 
-			out = ep_choose(gadget,
-					&pn_hs_sink_desc,
-					&pn_fs_sink_desc);
-			in = ep_choose(gadget,
-					&pn_hs_source_desc,
-					&pn_fs_source_desc);
-			usb_ep_enable(fp->out_ep, out);
-			usb_ep_enable(fp->in_ep, in);
+			if (config_ep_by_speed(gadget, f, fp->in_ep) ||
+			    config_ep_by_speed(gadget, f, fp->out_ep)) {
+				fp->in_ep->desc = NULL;
+				fp->out_ep->desc = NULL;
+				return -EINVAL;
+			}
+			usb_ep_enable(fp->out_ep);
+			usb_ep_enable(fp->in_ep);
 
 			port->usb = fp;
 			fp->out_ep->driver_data = fp;
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index fa12ec8364e..8f3eae90919 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -76,23 +76,13 @@
  *   - MS-Windows drivers sometimes emit undocumented requests.
  */
 
-struct rndis_ep_descs {
-	struct usb_endpoint_descriptor	*in;
-	struct usb_endpoint_descriptor	*out;
-	struct usb_endpoint_descriptor	*notify;
-};
-
 struct f_rndis {
 	struct gether			port;
 	u8				ctrl_id, data_id;
 	u8				ethaddr[ETH_ALEN];
 	int				config;
 
-	struct rndis_ep_descs		fs;
-	struct rndis_ep_descs		hs;
-
 	struct usb_ep			*notify;
-	struct usb_endpoint_descriptor	*notify_desc;
 	struct usb_request		*notify_req;
 	atomic_t			notify_count;
 };
@@ -105,10 +95,12 @@ static inline struct f_rndis *func_to_rndis(struct usb_function *f)
 /* peak (theoretical) bulk transfer rate in bits-per-second */
 static unsigned int bitrate(struct usb_gadget *g)
 {
-	if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+	if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
+		return 13 * 1024 * 8 * 1000 * 8;
+	else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
 		return 13 * 512 * 8 * 1000 * 8;
 	else
-		return 19 *  64 * 1 * 1000 * 8;
+		return 19 * 64 * 1 * 1000 * 8;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -226,6 +218,7 @@ static struct usb_endpoint_descriptor fs_out_desc = {
 
 static struct usb_descriptor_header *eth_fs_function[] = {
 	(struct usb_descriptor_header *) &rndis_iad_descriptor,
+
 	/* control interface matches ACM, not Ethernet */
 	(struct usb_descriptor_header *) &rndis_control_intf,
 	(struct usb_descriptor_header *) &header_desc,
@@ -233,6 +226,7 @@ static struct usb_descriptor_header *eth_fs_function[] = {
 	(struct usb_descriptor_header *) &rndis_acm_descriptor,
 	(struct usb_descriptor_header *) &rndis_union_desc,
 	(struct usb_descriptor_header *) &fs_notify_desc,
+
 	/* data interface has no altsetting */
 	(struct usb_descriptor_header *) &rndis_data_intf,
 	(struct usb_descriptor_header *) &fs_in_desc,
@@ -251,6 +245,7 @@ static struct usb_endpoint_descriptor hs_notify_desc = {
 	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
 	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
 };
+
 static struct usb_endpoint_descriptor hs_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
@@ -271,6 +266,7 @@ static struct usb_endpoint_descriptor hs_out_desc = {
 
 static struct usb_descriptor_header *eth_hs_function[] = {
 	(struct usb_descriptor_header *) &rndis_iad_descriptor,
+
 	/* control interface matches ACM, not Ethernet */
 	(struct usb_descriptor_header *) &rndis_control_intf,
 	(struct usb_descriptor_header *) &header_desc,
@@ -278,6 +274,7 @@ static struct usb_descriptor_header *eth_hs_function[] = {
 	(struct usb_descriptor_header *) &rndis_acm_descriptor,
 	(struct usb_descriptor_header *) &rndis_union_desc,
 	(struct usb_descriptor_header *) &hs_notify_desc,
+
 	/* data interface has no altsetting */
 	(struct usb_descriptor_header *) &rndis_data_intf,
 	(struct usb_descriptor_header *) &hs_in_desc,
@@ -285,6 +282,76 @@ static struct usb_descriptor_header *eth_hs_function[] = {
 	NULL,
 };
 
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_notify_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
+	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
+};
+
+static struct usb_ss_ep_comp_descriptor ss_intr_comp_desc = {
+	.bLength =		sizeof ss_intr_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 3 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+	.wBytesPerInterval =	cpu_to_le16(STATUS_BYTECOUNT),
+};
+
+static struct usb_endpoint_descriptor ss_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor ss_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_bulk_comp_desc = {
+	.bLength =		sizeof ss_bulk_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 2 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+};
+
+static struct usb_descriptor_header *eth_ss_function[] = {
+	(struct usb_descriptor_header *) &rndis_iad_descriptor,
+
+	/* control interface matches ACM, not Ethernet */
+	(struct usb_descriptor_header *) &rndis_control_intf,
+	(struct usb_descriptor_header *) &header_desc,
+	(struct usb_descriptor_header *) &call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &rndis_acm_descriptor,
+	(struct usb_descriptor_header *) &rndis_union_desc,
+	(struct usb_descriptor_header *) &ss_notify_desc,
+	(struct usb_descriptor_header *) &ss_intr_comp_desc,
+
+	/* data interface has no altsetting */
+	(struct usb_descriptor_header *) &rndis_data_intf,
+	(struct usb_descriptor_header *) &ss_in_desc,
+	(struct usb_descriptor_header *) &ss_bulk_comp_desc,
+	(struct usb_descriptor_header *) &ss_out_desc,
+	(struct usb_descriptor_header *) &ss_bulk_comp_desc,
+	NULL,
+};
+
 /* string descriptors: */
 
 static struct usb_string rndis_string_defs[] = {
@@ -484,13 +551,13 @@ static int rndis_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		if (rndis->notify->driver_data) {
 			VDBG(cdev, "reset rndis control %d\n", intf);
 			usb_ep_disable(rndis->notify);
-		} else {
+		}
+		if (!rndis->notify->desc) {
 			VDBG(cdev, "init rndis ctrl %d\n", intf);
-			rndis->notify_desc = ep_choose(cdev->gadget,
-					rndis->hs.notify,
-					rndis->fs.notify);
+			if (config_ep_by_speed(cdev->gadget, f, rndis->notify))
+				goto fail;
 		}
-		usb_ep_enable(rndis->notify, rndis->notify_desc);
+		usb_ep_enable(rndis->notify);
 		rndis->notify->driver_data = rndis;
 
 	} else if (intf == rndis->data_id) {
@@ -501,12 +568,16 @@ static int rndis_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 			gether_disconnect(&rndis->port);
 		}
 
-		if (!rndis->port.in) {
+		if (!rndis->port.in_ep->desc || !rndis->port.out_ep->desc) {
 			DBG(cdev, "init rndis\n");
-			rndis->port.in = ep_choose(cdev->gadget,
-					rndis->hs.in, rndis->fs.in);
-			rndis->port.out = ep_choose(cdev->gadget,
-					rndis->hs.out, rndis->fs.out);
+			if (config_ep_by_speed(cdev->gadget, f,
+					       rndis->port.in_ep) ||
+			    config_ep_by_speed(cdev->gadget, f,
+					       rndis->port.out_ep)) {
+				rndis->port.in_ep->desc = NULL;
+				rndis->port.out_ep->desc = NULL;
+				goto fail;
+			}
 		}
 
 		/* Avoid ZLPs; they can be troublesome. */
@@ -662,13 +733,6 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
 	if (!f->descriptors)
 		goto fail;
 
-	rndis->fs.in = usb_find_endpoint(eth_fs_function,
-			f->descriptors, &fs_in_desc);
-	rndis->fs.out = usb_find_endpoint(eth_fs_function,
-			f->descriptors, &fs_out_desc);
-	rndis->fs.notify = usb_find_endpoint(eth_fs_function,
-			f->descriptors, &fs_notify_desc);
-
 	/* support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
 	 * both speeds
@@ -683,16 +747,22 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
 
 		/* copy descriptors, and track endpoint copies */
 		f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
-
 		if (!f->hs_descriptors)
 			goto fail;
+	}
 
-		rndis->hs.in = usb_find_endpoint(eth_hs_function,
-				f->hs_descriptors, &hs_in_desc);
-		rndis->hs.out = usb_find_endpoint(eth_hs_function,
-				f->hs_descriptors, &hs_out_desc);
-		rndis->hs.notify = usb_find_endpoint(eth_hs_function,
-				f->hs_descriptors, &hs_notify_desc);
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		ss_in_desc.bEndpointAddress =
+				fs_in_desc.bEndpointAddress;
+		ss_out_desc.bEndpointAddress =
+				fs_out_desc.bEndpointAddress;
+		ss_notify_desc.bEndpointAddress =
+				fs_notify_desc.bEndpointAddress;
+
+		/* copy descriptors, and track endpoint copies */
+		f->ss_descriptors = usb_copy_descriptors(eth_ss_function);
+		if (!f->ss_descriptors)
+			goto fail;
 	}
 
 	rndis->port.open = rndis_open;
@@ -719,12 +789,15 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f)
 	 */
 
 	DBG(cdev, "RNDIS: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+			gadget_is_superspeed(c->cdev->gadget) ? "super" :
 			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
 			rndis->port.in_ep->name, rndis->port.out_ep->name,
 			rndis->notify->name);
 	return 0;
 
 fail:
+	if (gadget_is_superspeed(c->cdev->gadget) && f->ss_descriptors)
+		usb_free_descriptors(f->ss_descriptors);
 	if (gadget_is_dualspeed(c->cdev->gadget) && f->hs_descriptors)
 		usb_free_descriptors(f->hs_descriptors);
 	if (f->descriptors)
@@ -738,9 +811,9 @@ fail:
 	/* we might as well release our claims on endpoints */
 	if (rndis->notify)
 		rndis->notify->driver_data = NULL;
-	if (rndis->port.out)
+	if (rndis->port.out_ep->desc)
 		rndis->port.out_ep->driver_data = NULL;
-	if (rndis->port.in)
+	if (rndis->port.in_ep->desc)
 		rndis->port.in_ep->driver_data = NULL;
 
 	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -756,6 +829,8 @@ rndis_unbind(struct usb_configuration *c, struct usb_function *f)
 	rndis_deregister(rndis->config);
 	rndis_exit();
 
+	if (gadget_is_superspeed(c->cdev->gadget))
+		usb_free_descriptors(f->ss_descriptors);
 	if (gadget_is_dualspeed(c->cdev->gadget))
 		usb_free_descriptors(f->hs_descriptors);
 	usb_free_descriptors(f->descriptors);
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index 490b00b01a7..91fdf790ed2 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -27,18 +27,10 @@
  * if you can arrange appropriate host side drivers.
  */
 
-struct gser_descs {
-	struct usb_endpoint_descriptor	*in;
-	struct usb_endpoint_descriptor	*out;
-};
-
 struct f_gser {
 	struct gserial			port;
 	u8				data_id;
 	u8				port_num;
-
-	struct gser_descs		fs;
-	struct gser_descs		hs;
 };
 
 static inline struct f_gser *func_to_gser(struct usb_function *f)
@@ -136,12 +128,15 @@ static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 	if (gser->port.in->driver_data) {
 		DBG(cdev, "reset generic ttyGS%d\n", gser->port_num);
 		gserial_disconnect(&gser->port);
-	} else {
+	}
+	if (!gser->port.in->desc || !gser->port.out->desc) {
 		DBG(cdev, "activate generic ttyGS%d\n", gser->port_num);
-		gser->port.in_desc = ep_choose(cdev->gadget,
-				gser->hs.in, gser->fs.in);
-		gser->port.out_desc = ep_choose(cdev->gadget,
-				gser->hs.out, gser->fs.out);
+		if (!config_ep_by_speed(cdev->gadget, f, gser->port.in) ||
+		    !config_ep_by_speed(cdev->gadget, f, gser->port.out)) {
+			gser->port.in->desc = NULL;
+			gser->port.out->desc = NULL;
+			return -EINVAL;
+		}
 	}
 	gserial_connect(&gser->port, gser->port_num);
 	return 0;
@@ -193,12 +188,6 @@ gser_bind(struct usb_configuration *c, struct usb_function *f)
 	/* copy descriptors, and track endpoint copies */
 	f->descriptors = usb_copy_descriptors(gser_fs_function);
 
-	gser->fs.in = usb_find_endpoint(gser_fs_function,
-			f->descriptors, &gser_fs_in_desc);
-	gser->fs.out = usb_find_endpoint(gser_fs_function,
-			f->descriptors, &gser_fs_out_desc);
-
-
 	/* support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
 	 * both speeds
@@ -211,11 +200,6 @@ gser_bind(struct usb_configuration *c, struct usb_function *f)
 
 		/* copy descriptors, and track endpoint copies */
 		f->hs_descriptors = usb_copy_descriptors(gser_hs_function);
-
-		gser->hs.in = usb_find_endpoint(gser_hs_function,
-				f->hs_descriptors, &gser_hs_in_desc);
-		gser->hs.out = usb_find_endpoint(gser_hs_function,
-				f->hs_descriptors, &gser_hs_out_desc);
 	}
 
 	DBG(cdev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index e403a534dd5..e18b4f52095 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -131,6 +131,49 @@ static struct usb_descriptor_header *hs_source_sink_descs[] = {
 	NULL,
 };
 
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+struct usb_ss_ep_comp_descriptor ss_source_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	0,
+};
+
+static struct usb_endpoint_descriptor ss_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+struct usb_ss_ep_comp_descriptor ss_sink_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	0,
+};
+
+static struct usb_descriptor_header *ss_source_sink_descs[] = {
+	(struct usb_descriptor_header *) &source_sink_intf,
+	(struct usb_descriptor_header *) &ss_source_desc,
+	(struct usb_descriptor_header *) &ss_source_comp_desc,
+	(struct usb_descriptor_header *) &ss_sink_desc,
+	(struct usb_descriptor_header *) &ss_sink_comp_desc,
+	NULL,
+};
+
 /* function-specific strings: */
 
 static struct usb_string strings_sourcesink[] = {
@@ -187,8 +230,18 @@ autoconf_fail:
 		f->hs_descriptors = hs_source_sink_descs;
 	}
 
+	/* support super speed hardware */
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		ss_source_desc.bEndpointAddress =
+				fs_source_desc.bEndpointAddress;
+		ss_sink_desc.bEndpointAddress =
+				fs_sink_desc.bEndpointAddress;
+		f->ss_descriptors = ss_source_sink_descs;
+	}
+
 	DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
-			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+	    (gadget_is_superspeed(c->cdev->gadget) ? "super" :
+	     (gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full")),
 			f->name, ss->in_ep->name, ss->out_ep->name);
 	return 0;
 }
@@ -343,15 +396,14 @@ static int
 enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss)
 {
 	int					result = 0;
-	const struct usb_endpoint_descriptor	*src, *sink;
 	struct usb_ep				*ep;
 
-	src = ep_choose(cdev->gadget, &hs_source_desc, &fs_source_desc);
-	sink = ep_choose(cdev->gadget, &hs_sink_desc, &fs_sink_desc);
-
 	/* one endpoint writes (sources) zeroes IN (to the host) */
 	ep = ss->in_ep;
-	result = usb_ep_enable(ep, src);
+	result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
+	if (result)
+		return result;
+	result = usb_ep_enable(ep);
 	if (result < 0)
 		return result;
 	ep->driver_data = ss;
@@ -367,7 +419,10 @@ fail:
 
 	/* one endpoint reads (sinks) anything OUT (from the host) */
 	ep = ss->out_ep;
-	result = usb_ep_enable(ep, sink);
+	result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
+	if (result)
+		goto fail;
+	result = usb_ep_enable(ep);
 	if (result < 0)
 		goto fail;
 	ep->driver_data = ss;
@@ -435,6 +490,8 @@ static int sourcesink_setup(struct usb_configuration *c,
 	u16			w_value = le16_to_cpu(ctrl->wValue);
 	u16			w_length = le16_to_cpu(ctrl->wLength);
 
+	req->length = USB_BUFSIZ;
+
 	/* composite driver infrastructure handles everything except
 	 * the two control test requests.
 	 */
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index 8675ca41532..3dc53754ab6 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -57,18 +57,10 @@
  * caring about specific product and vendor IDs.
  */
 
-struct geth_descs {
-	struct usb_endpoint_descriptor	*in;
-	struct usb_endpoint_descriptor	*out;
-};
-
 struct f_gether {
 	struct gether			port;
 
 	char				ethaddr[14];
-
-	struct geth_descs		fs;
-	struct geth_descs		hs;
 };
 
 static inline struct f_gether *func_to_geth(struct usb_function *f)
@@ -209,6 +201,46 @@ static struct usb_descriptor_header *hs_eth_function[] __initdata = {
 	NULL,
 };
 
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_subset_in_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor ss_subset_out_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_subset_bulk_comp_desc __initdata = {
+	.bLength =		sizeof ss_subset_bulk_comp_desc,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	/* the following 2 values can be tweaked if necessary */
+	/* .bMaxBurst =		0, */
+	/* .bmAttributes =	0, */
+};
+
+static struct usb_descriptor_header *ss_eth_function[] __initdata = {
+	(struct usb_descriptor_header *) &subset_data_intf,
+	(struct usb_descriptor_header *) &mdlm_header_desc,
+	(struct usb_descriptor_header *) &mdlm_desc,
+	(struct usb_descriptor_header *) &mdlm_detail_desc,
+	(struct usb_descriptor_header *) &ether_desc,
+	(struct usb_descriptor_header *) &ss_subset_in_desc,
+	(struct usb_descriptor_header *) &ss_subset_bulk_comp_desc,
+	(struct usb_descriptor_header *) &ss_subset_out_desc,
+	(struct usb_descriptor_header *) &ss_subset_bulk_comp_desc,
+	NULL,
+};
+
 /* string descriptors: */
 
 static struct usb_string geth_string_defs[] = {
@@ -243,10 +275,12 @@ static int geth_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 	}
 
 	DBG(cdev, "init + activate cdc subset\n");
-	geth->port.in = ep_choose(cdev->gadget,
-			geth->hs.in, geth->fs.in);
-	geth->port.out = ep_choose(cdev->gadget,
-			geth->hs.out, geth->fs.out);
+	if (config_ep_by_speed(cdev->gadget, f, geth->port.in_ep) ||
+	    config_ep_by_speed(cdev->gadget, f, geth->port.out_ep)) {
+		geth->port.in_ep->desc = NULL;
+		geth->port.out_ep->desc = NULL;
+		return -EINVAL;
+	}
 
 	net = gether_connect(&geth->port);
 	return IS_ERR(net) ? PTR_ERR(net) : 0;
@@ -296,12 +330,8 @@ geth_bind(struct usb_configuration *c, struct usb_function *f)
 
 	/* copy descriptors, and track endpoint copies */
 	f->descriptors = usb_copy_descriptors(fs_eth_function);
-
-	geth->fs.in = usb_find_endpoint(fs_eth_function,
-			f->descriptors, &fs_subset_in_desc);
-	geth->fs.out = usb_find_endpoint(fs_eth_function,
-			f->descriptors, &fs_subset_out_desc);
-
+	if (!f->descriptors)
+		goto fail;
 
 	/* support all relevant hardware speeds... we expect that when
 	 * hardware is dual speed, all bulk-capable endpoints work at
@@ -315,11 +345,20 @@ geth_bind(struct usb_configuration *c, struct usb_function *f)
 
 		/* copy descriptors, and track endpoint copies */
 		f->hs_descriptors = usb_copy_descriptors(hs_eth_function);
+		if (!f->hs_descriptors)
+			goto fail;
+	}
 
-		geth->hs.in = usb_find_endpoint(hs_eth_function,
-				f->hs_descriptors, &hs_subset_in_desc);
-		geth->hs.out = usb_find_endpoint(hs_eth_function,
-				f->hs_descriptors, &hs_subset_out_desc);
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		ss_subset_in_desc.bEndpointAddress =
+				fs_subset_in_desc.bEndpointAddress;
+		ss_subset_out_desc.bEndpointAddress =
+				fs_subset_out_desc.bEndpointAddress;
+
+		/* copy descriptors, and track endpoint copies */
+		f->ss_descriptors = usb_copy_descriptors(ss_eth_function);
+		if (!f->ss_descriptors)
+			goto fail;
 	}
 
 	/* NOTE:  all that is done without knowing or caring about
@@ -328,15 +367,21 @@ geth_bind(struct usb_configuration *c, struct usb_function *f)
 	 */
 
 	DBG(cdev, "CDC Subset: %s speed IN/%s OUT/%s\n",
+			gadget_is_superspeed(c->cdev->gadget) ? "super" :
 			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
 			geth->port.in_ep->name, geth->port.out_ep->name);
 	return 0;
 
 fail:
+	if (f->descriptors)
+		usb_free_descriptors(f->descriptors);
+	if (f->hs_descriptors)
+		usb_free_descriptors(f->hs_descriptors);
+
 	/* we might as well release our claims on endpoints */
-	if (geth->port.out)
+	if (geth->port.out_ep->desc)
 		geth->port.out_ep->driver_data = NULL;
-	if (geth->port.in)
+	if (geth->port.in_ep->desc)
 		geth->port.in_ep->driver_data = NULL;
 
 	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
@@ -347,6 +392,8 @@ fail:
 static void
 geth_unbind(struct usb_configuration *c, struct usb_function *f)
 {
+	if (gadget_is_superspeed(c->cdev->gadget))
+		usb_free_descriptors(f->ss_descriptors);
 	if (gadget_is_dualspeed(c->cdev->gadget))
 		usb_free_descriptors(f->hs_descriptors);
 	usb_free_descriptors(f->descriptors);
diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
index be446b7e7ea..7a8b9aa4aea 100644
--- a/drivers/usb/gadget/f_uvc.c
+++ b/drivers/usb/gadget/f_uvc.c
@@ -262,8 +262,10 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
 		if (uvc->state != UVC_STATE_CONNECTED)
 			return 0;
 
-		if (uvc->video.ep)
-			usb_ep_enable(uvc->video.ep, &uvc_streaming_ep);
+		if (uvc->video.ep) {
+			uvc->video.ep->desc = &uvc_streaming_ep;
+			usb_ep_enable(uvc->video.ep);
+		}
 
 		memset(&v4l2_event, 0, sizeof(v4l2_event));
 		v4l2_event.type = UVC_EVENT_STREAMON;
@@ -649,7 +651,7 @@ uvc_bind_config(struct usb_configuration *c,
 	if (ret)
 		kfree(uvc);
 
-	return 0;
+	return ret;
 
 error:
 	kfree(uvc);
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 0360f56221e..639e14a2fd1 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -929,6 +929,7 @@ static int standard_setup_req(struct fsg_dev *fsg,
 
 		case USB_DT_DEVICE:
 			VDBG(fsg, "get device descriptor\n");
+			device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket;
 			value = sizeof device_desc;
 			memcpy(req->buf, &device_desc, value);
 			break;
@@ -936,6 +937,11 @@ static int standard_setup_req(struct fsg_dev *fsg,
 			VDBG(fsg, "get device qualifier\n");
 			if (!gadget_is_dualspeed(fsg->gadget))
 				break;
+			/*
+			 * Assume ep0 uses the same maxpacket value for both
+			 * speeds
+			 */
+			dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
 			value = sizeof dev_qualifier;
 			memcpy(req->buf, &dev_qualifier, value);
 			break;
@@ -2713,7 +2719,8 @@ static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep,
 	int	rc;
 
 	ep->driver_data = fsg;
-	rc = usb_ep_enable(ep, d);
+	ep->desc = d;
+	rc = usb_ep_enable(ep);
 	if (rc)
 		ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc);
 	return rc;
@@ -3416,7 +3423,6 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 	}
 
 	/* Fix up the descriptors */
-	device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket;
 	device_desc.idVendor = cpu_to_le16(mod_data.vendor);
 	device_desc.idProduct = cpu_to_le16(mod_data.product);
 	device_desc.bcdDevice = cpu_to_le16(mod_data.release);
@@ -3430,9 +3436,6 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 	if (gadget_is_dualspeed(gadget)) {
 		fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
 
-		/* Assume ep0 uses the same maxpacket value for both speeds */
-		dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
-
 		/* Assume endpoint addresses are the same for both speeds */
 		fsg_hs_bulk_in_desc.bEndpointAddress =
 			fsg_fs_bulk_in_desc.bEndpointAddress;
@@ -3486,6 +3489,8 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 	}
 
 	INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
+	INFO(fsg, "NOTE: This driver is deprecated.  "
+			"Consider using g_mass_storage instead.\n");
 	INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
 
 	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 3a68e09309f..3bf872e1ad3 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -1927,6 +1927,10 @@ static int qe_pullup(struct usb_gadget *gadget, int is_on)
 	return -ENOTSUPP;
 }
 
+static int fsl_qe_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int fsl_qe_stop(struct usb_gadget_driver *driver);
+
 /* defined in usb_gadget.h */
 static struct usb_gadget_ops qe_gadget_ops = {
 	.get_frame = qe_get_frame,
@@ -1935,6 +1939,8 @@ static struct usb_gadget_ops qe_gadget_ops = {
 	.vbus_session = qe_vbus_session,
 	.vbus_draw = qe_vbus_draw,
 	.pullup = qe_pullup,
+	.start = fsl_qe_start,
+	.stop = fsl_qe_stop,
 };
 
 /*-------------------------------------------------------------------------
@@ -2320,7 +2326,7 @@ static irqreturn_t qe_udc_irq(int irq, void *_udc)
 /*-------------------------------------------------------------------------
 	Gadget driver probe and unregister.
  --------------------------------------------------------------------------*/
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int fsl_qe_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	int retval;
@@ -2369,9 +2375,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		udc_controller->gadget.name, driver->driver.name);
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int fsl_qe_stop(struct usb_gadget_driver *driver)
 {
 	struct qe_ep *loop_ep;
 	unsigned long flags;
@@ -2411,7 +2416,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 			driver->driver.name);
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
 /* udc structure's alloc and setup, include ep-param alloc */
 static struct qe_udc __devinit *qe_udc_config(struct platform_device *ofdev)
@@ -2662,11 +2666,17 @@ static int __devinit qe_udc_probe(struct platform_device *ofdev)
 	if (ret)
 		goto err6;
 
+	ret = usb_add_gadget_udc(&ofdev->dev, &udc_controller->gadget);
+	if (ret)
+		goto err7;
+
 	dev_info(udc_controller->dev,
 			"%s USB controller initialized as device\n",
 			(udc_controller->soc_type == PORT_QE) ? "QE" : "CPM");
 	return 0;
 
+err7:
+	device_unregister(&udc_controller->gadget.dev);
 err6:
 	free_irq(udc_controller->usb_irq, udc_controller);
 err5:
@@ -2721,6 +2731,8 @@ static int __devexit qe_udc_remove(struct platform_device *ofdev)
 	if (!udc_controller)
 		return -ENODEV;
 
+	usb_del_gadget_udc(&udc_controller->gadget);
+
 	udc_controller->done = &done;
 	tasklet_disable(&udc_controller->rx_tasklet);
 
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 3e59035e6de..de24a4233c2 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1244,6 +1244,9 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on)
 	return 0;
 }
 
+static int fsl_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int fsl_stop(struct usb_gadget_driver *driver);
 /* defined in gadget.h */
 static struct usb_gadget_ops fsl_gadget_ops = {
 	.get_frame = fsl_get_frame,
@@ -1252,6 +1255,8 @@ static struct usb_gadget_ops fsl_gadget_ops = {
 	.vbus_session = fsl_vbus_session,
 	.vbus_draw = fsl_vbus_draw,
 	.pullup = fsl_pullup,
+	.start = fsl_start,
+	.stop = fsl_stop,
 };
 
 /* Set protocol stall on ep0, protocol stall will automatically be cleared
@@ -1927,7 +1932,7 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc)
  * Hook to gadget drivers
  * Called by initialization code of gadget drivers
 *----------------------------------------------------------------*/
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int fsl_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	int retval = -ENODEV;
@@ -1995,10 +2000,9 @@ out:
 		       retval);
 	return retval;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
 /* Disconnect from gadget driver */
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int fsl_stop(struct usb_gadget_driver *driver)
 {
 	struct fsl_ep *loop_ep;
 	unsigned long flags;
@@ -2041,7 +2045,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	       driver->driver.name);
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
 /*-------------------------------------------------------------------------
 		PROC File System Support
@@ -2590,9 +2593,16 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 		ret = -ENOMEM;
 		goto err_unregister;
 	}
+
+	ret = usb_add_gadget_udc(&pdev->dev, &udc_controller->gadget);
+	if (ret)
+		goto err_del_udc;
+
 	create_proc_file();
 	return 0;
 
+err_del_udc:
+	dma_pool_destroy(udc_controller->td_pool);
 err_unregister:
 	device_unregister(&udc_controller->gadget.dev);
 err_free_irq:
@@ -2624,6 +2634,8 @@ static int __exit fsl_udc_remove(struct platform_device *pdev)
 
 	if (!udc_controller)
 		return -ENODEV;
+
+	usb_del_gadget_udc(&udc_controller->gadget);
 	udc_controller->done = &done;
 
 	fsl_udc_clk_release();
diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index 763d462454b..24a924330c8 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -767,56 +767,6 @@ static void fusb300_rdfifo(struct fusb300_ep *ep,
 	} while (!reg);
 }
 
-/* write data to fifo */
-static void fusb300_wrfifo(struct fusb300_ep *ep,
-			   struct fusb300_request *req)
-{
-	int i = 0;
-	u8 *tmp;
-	u32 data, reg;
-	struct fusb300 *fusb300 = ep->fusb300;
-
-	tmp = req->req.buf;
-	req->req.actual = req->req.length;
-
-	for (i = (req->req.length >> 2); i > 0; i--) {
-		data = *tmp | *(tmp + 1) << 8 |
-			*(tmp + 2) << 16 | *(tmp + 3) << 24;
-
-		iowrite32(data, fusb300->reg +
-			FUSB300_OFFSET_EPPORT(ep->epnum));
-		tmp += 4;
-	}
-
-	switch (req->req.length % 4) {
-	case 1:
-		data = *tmp;
-		iowrite32(data, fusb300->reg +
-			FUSB300_OFFSET_EPPORT(ep->epnum));
-		break;
-	case 2:
-		data = *tmp | *(tmp + 1) << 8;
-		iowrite32(data, fusb300->reg +
-			FUSB300_OFFSET_EPPORT(ep->epnum));
-		break;
-	case 3:
-		data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16;
-		iowrite32(data, fusb300->reg +
-			FUSB300_OFFSET_EPPORT(ep->epnum));
-		break;
-	default:
-		break;
-	}
-
-	do {
-		reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1);
-		reg &= FUSB300_IGR1_SYNF0_EMPTY_INT;
-		if (i)
-			printk(KERN_INFO"sync fifo is not empty!\n");
-		i++;
-	} while (!reg);
-}
-
 static u8 fusb300_get_epnstall(struct fusb300 *fusb300, u8 ep)
 {
 	u8 value;
@@ -980,11 +930,6 @@ static void set_address(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
 		} \
 	} while (0)
 
-static void fusb300_ep0_complete(struct usb_ep *ep,
-				struct usb_request *req)
-{
-}
-
 static int setup_packet(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
 {
 	u8 *p = (u8 *)ctrl;
@@ -1029,17 +974,6 @@ static int setup_packet(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
 	return ret;
 }
 
-static void fusb300_set_ep_bycnt(struct fusb300_ep *ep, u32 bycnt)
-{
-	struct fusb300 *fusb300 = ep->fusb300;
-	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum));
-
-	reg &= ~FUSB300_FFR_BYCNT;
-	reg |= bycnt & FUSB300_FFR_BYCNT;
-
-	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum));
-}
-
 static void done(struct fusb300_ep *ep, struct fusb300_request *req,
 		 int status)
 {
@@ -1063,8 +997,8 @@ static void done(struct fusb300_ep *ep, struct fusb300_request *req,
 		fusb300_set_cxdone(ep->fusb300);
 }
 
-void fusb300_fill_idma_prdtbl(struct fusb300_ep *ep,
-			struct fusb300_request *req)
+static void fusb300_fill_idma_prdtbl(struct fusb300_ep *ep, dma_addr_t d,
+		u32 len)
 {
 	u32 value;
 	u32 reg;
@@ -1076,10 +1010,9 @@ void fusb300_fill_idma_prdtbl(struct fusb300_ep *ep,
 		reg &= FUSB300_EPPRD0_H;
 	} while (reg);
 
-	iowrite32((u32) req->req.buf, ep->fusb300->reg +
-		FUSB300_OFFSET_EPPRD_W1(ep->epnum));
+	iowrite32(d, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W1(ep->epnum));
 
-	value = FUSB300_EPPRD0_BTC(req->req.length) | FUSB300_EPPRD0_H |
+	value = FUSB300_EPPRD0_BTC(len) | FUSB300_EPPRD0_H |
 		FUSB300_EPPRD0_F | FUSB300_EPPRD0_L | FUSB300_EPPRD0_I;
 	iowrite32(value, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W0(ep->epnum));
 
@@ -1116,13 +1049,12 @@ static void  fusb300_set_idma(struct fusb300_ep *ep,
 			struct fusb300_request *req)
 {
 	dma_addr_t d;
-	u8 *tmp = NULL;
 
 	d = dma_map_single(NULL, req->req.buf, req->req.length, DMA_TO_DEVICE);
 
 	if (dma_mapping_error(NULL, d)) {
-		kfree(req->req.buf);
 		printk(KERN_DEBUG "dma_mapping_error\n");
+		return;
 	}
 
 	dma_sync_single_for_device(NULL, d, req->req.length, DMA_TO_DEVICE);
@@ -1130,17 +1062,11 @@ static void  fusb300_set_idma(struct fusb300_ep *ep,
 	fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER0,
 		FUSB300_IGER0_EEPn_PRD_INT(ep->epnum));
 
-	tmp = req->req.buf;
-	req->req.buf = (u8 *)d;
-
-	fusb300_fill_idma_prdtbl(ep, req);
+	fusb300_fill_idma_prdtbl(ep, d, req->req.length);
 	/* check idma is done */
 	fusb300_wait_idma_finished(ep);
 
-	req->req.buf = tmp;
-
-	if (d)
-		dma_unmap_single(NULL, d, req->req.length, DMA_TO_DEVICE);
+	dma_unmap_single(NULL, d, req->req.length, DMA_TO_DEVICE);
 }
 
 static void in_ep_fifo_handler(struct fusb300_ep *ep)
@@ -1148,14 +1074,8 @@ static void in_ep_fifo_handler(struct fusb300_ep *ep)
 	struct fusb300_request *req = list_entry(ep->queue.next,
 					struct fusb300_request, queue);
 
-	if (req->req.length) {
-#if 0
-		fusb300_set_ep_bycnt(ep, req->req.length);
-		fusb300_wrfifo(ep, req);
-#else
+	if (req->req.length)
 		fusb300_set_idma(ep, req);
-#endif
-	}
 	done(ep, req, 0);
 }
 
@@ -1500,7 +1420,7 @@ static void init_controller(struct fusb300 *fusb300)
 /*------------------------------------------------------------------------*/
 static struct fusb300 *the_controller;
 
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int fusb300_udc_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct fusb300 *fusb300 = the_controller;
@@ -1544,9 +1464,8 @@ error:
 
 	return retval;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int fusb300_udc_stop(struct usb_gadget_driver *driver)
 {
 	struct fusb300 *fusb300 = the_controller;
 
@@ -1562,7 +1481,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 /*--------------------------------------------------------------------------*/
 
 static int fusb300_udc_pullup(struct usb_gadget *_gadget, int is_active)
@@ -1572,12 +1490,15 @@ static int fusb300_udc_pullup(struct usb_gadget *_gadget, int is_active)
 
 static struct usb_gadget_ops fusb300_gadget_ops = {
 	.pullup		= fusb300_udc_pullup,
+	.start		= fusb300_udc_start,
+	.stop		= fusb300_udc_stop,
 };
 
 static int __exit fusb300_remove(struct platform_device *pdev)
 {
 	struct fusb300 *fusb300 = dev_get_drvdata(&pdev->dev);
 
+	usb_del_gadget_udc(&fusb300->gadget);
 	iounmap(fusb300->reg);
 	free_irq(platform_get_irq(pdev, 0), fusb300);
 
@@ -1702,9 +1623,15 @@ static int __init fusb300_probe(struct platform_device *pdev)
 		goto clean_up3;
 
 	init_controller(fusb300);
+	ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget);
+	if (ret)
+		goto err_add_udc;
+
 	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
 
 	return 0;
+err_add_udc:
+	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
 
 clean_up3:
 	free_irq(ires->start, fusb300);
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index ebf6970a10b..704c2800ac0 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -162,6 +162,7 @@ static struct usb_composite_driver gfs_driver = {
 	.name		= DRIVER_NAME,
 	.dev		= &gfs_dev_desc,
 	.strings	= gfs_dev_strings,
+	.max_speed	= USB_SPEED_HIGH,
 	.unbind		= gfs_unbind,
 	.iProduct	= DRIVER_DESC,
 };
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index bcdac7c73e8..f3a83cd0ef5 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -15,150 +15,40 @@
 #ifndef __GADGET_CHIPS_H
 #define __GADGET_CHIPS_H
 
-#ifdef CONFIG_USB_GADGET_NET2280
-#define	gadget_is_net2280(g)	!strcmp("net2280", (g)->name)
-#else
-#define	gadget_is_net2280(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_AMD5536UDC
-#define	gadget_is_amd5536udc(g)	!strcmp("amd5536udc", (g)->name)
-#else
-#define	gadget_is_amd5536udc(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_DUMMY_HCD
-#define	gadget_is_dummy(g)	!strcmp("dummy_udc", (g)->name)
-#else
-#define	gadget_is_dummy(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_PXA25X
-#define	gadget_is_pxa(g)	!strcmp("pxa25x_udc", (g)->name)
-#else
-#define	gadget_is_pxa(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_GOKU
-#define	gadget_is_goku(g)	!strcmp("goku_udc", (g)->name)
-#else
-#define	gadget_is_goku(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_OMAP
-#define	gadget_is_omap(g)	!strcmp("omap_udc", (g)->name)
-#else
-#define	gadget_is_omap(g)	0
-#endif
-
-/* various unstable versions available */
-#ifdef CONFIG_USB_GADGET_PXA27X
-#define	gadget_is_pxa27x(g)	!strcmp("pxa27x_udc", (g)->name)
-#else
-#define	gadget_is_pxa27x(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
-#define gadget_is_atmel_usba(g)	!strcmp("atmel_usba_udc", (g)->name)
-#else
-#define gadget_is_atmel_usba(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_S3C2410
-#define gadget_is_s3c2410(g)    !strcmp("s3c2410_udc", (g)->name)
-#else
-#define gadget_is_s3c2410(g)    0
-#endif
-
-#ifdef CONFIG_USB_GADGET_AT91
-#define gadget_is_at91(g)	!strcmp("at91_udc", (g)->name)
-#else
-#define gadget_is_at91(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_IMX
-#define gadget_is_imx(g)	!strcmp("imx_udc", (g)->name)
-#else
-#define gadget_is_imx(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_FSL_USB2
-#define gadget_is_fsl_usb2(g)	!strcmp("fsl-usb2-udc", (g)->name)
-#else
-#define gadget_is_fsl_usb2(g)	0
-#endif
-
-/* Mentor high speed "dual role" controller, in peripheral role */
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-#define gadget_is_musbhdrc(g)	!strcmp("musb-hdrc", (g)->name)
-#else
-#define gadget_is_musbhdrc(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_LANGWELL
-#define gadget_is_langwell(g)	(!strcmp("langwell_udc", (g)->name))
-#else
-#define gadget_is_langwell(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_M66592
-#define	gadget_is_m66592(g)	!strcmp("m66592_udc", (g)->name)
-#else
-#define	gadget_is_m66592(g)	0
-#endif
-
-/* Freescale CPM/QE UDC SUPPORT */
-#ifdef CONFIG_USB_GADGET_FSL_QE
-#define gadget_is_fsl_qe(g)	!strcmp("fsl_qe_udc", (g)->name)
-#else
-#define gadget_is_fsl_qe(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_CI13XXX_PCI
-#define gadget_is_ci13xxx_pci(g)	(!strcmp("ci13xxx_pci", (g)->name))
-#else
-#define gadget_is_ci13xxx_pci(g)	0
-#endif
-
-// CONFIG_USB_GADGET_SX2
-// CONFIG_USB_GADGET_AU1X00
-// ...
-
-#ifdef CONFIG_USB_GADGET_R8A66597
-#define	gadget_is_r8a66597(g)	!strcmp("r8a66597_udc", (g)->name)
-#else
-#define	gadget_is_r8a66597(g)	0
-#endif
-
-#ifdef CONFIG_USB_S3C_HSOTG
-#define gadget_is_s3c_hsotg(g)    (!strcmp("s3c-hsotg", (g)->name))
-#else
-#define gadget_is_s3c_hsotg(g)    0
-#endif
-
-#ifdef CONFIG_USB_S3C_HSUDC
-#define gadget_is_s3c_hsudc(g) (!strcmp("s3c-hsudc", (g)->name))
-#else
-#define gadget_is_s3c_hsudc(g) 0
-#endif
-
-#ifdef CONFIG_USB_GADGET_EG20T
-#define	gadget_is_pch(g)	(!strcmp("pch_udc", (g)->name))
-#else
-#define	gadget_is_pch(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_CI13XXX_MSM
+/*
+ * NOTICE: the entries below are alphabetical and should be kept
+ * that way.
+ *
+ * Always be sure to add new entries to the correct position or
+ * accept the bashing later.
+ *
+ * If you have forgotten the alphabetical order let VIM/EMACS
+ * do that for you.
+ */
+#define gadget_is_amd5536udc(g)		(!strcmp("amd5536udc", (g)->name))
+#define gadget_is_at91(g)		(!strcmp("at91_udc", (g)->name))
+#define gadget_is_atmel_usba(g)		(!strcmp("atmel_usba_udc", (g)->name))
 #define gadget_is_ci13xxx_msm(g)	(!strcmp("ci13xxx_msm", (g)->name))
-#else
-#define gadget_is_ci13xxx_msm(g)	0
-#endif
-
-#ifdef CONFIG_USB_GADGET_RENESAS_USBHS
-#define	gadget_is_renesas_usbhs(g) (!strcmp("renesas_usbhs_udc", (g)->name))
-#else
-#define	gadget_is_renesas_usbhs(g) 0
-#endif
+#define gadget_is_ci13xxx_pci(g)	(!strcmp("ci13xxx_pci", (g)->name))
+#define gadget_is_dummy(g)		(!strcmp("dummy_udc", (g)->name))
+#define gadget_is_fsl_qe(g)		(!strcmp("fsl_qe_udc", (g)->name))
+#define gadget_is_fsl_usb2(g)		(!strcmp("fsl-usb2-udc", (g)->name))
+#define gadget_is_goku(g)		(!strcmp("goku_udc", (g)->name))
+#define gadget_is_imx(g)		(!strcmp("imx_udc", (g)->name))
+#define gadget_is_langwell(g)		(!strcmp("langwell_udc", (g)->name))
+#define gadget_is_m66592(g)		(!strcmp("m66592_udc", (g)->name))
+#define gadget_is_musbhdrc(g)		(!strcmp("musb-hdrc", (g)->name))
+#define gadget_is_net2272(g)		(!strcmp("net2272", (g)->name))
+#define gadget_is_net2280(g)		(!strcmp("net2280", (g)->name))
+#define gadget_is_omap(g)		(!strcmp("omap_udc", (g)->name))
+#define gadget_is_pch(g)		(!strcmp("pch_udc", (g)->name))
+#define gadget_is_pxa(g)		(!strcmp("pxa25x_udc", (g)->name))
+#define gadget_is_pxa27x(g)		(!strcmp("pxa27x_udc", (g)->name))
+#define gadget_is_r8a66597(g)		(!strcmp("r8a66597_udc", (g)->name))
+#define gadget_is_renesas_usbhs(g)	(!strcmp("renesas_usbhs_udc", (g)->name))
+#define gadget_is_s3c2410(g)		(!strcmp("s3c2410_udc", (g)->name))
+#define gadget_is_s3c_hsotg(g)		(!strcmp("s3c-hsotg", (g)->name))
+#define gadget_is_s3c_hsudc(g)		(!strcmp("s3c-hsudc", (g)->name))
 
 /**
  * usb_gadget_controller_number - support bcdDevice id convention
@@ -223,6 +113,8 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x29;
 	else if (gadget_is_s3c_hsudc(gadget))
 		return 0x30;
+	else if (gadget_is_net2272(gadget))
+		return 0x31;
 
 	return -ENOENT;
 }
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 47b86b99d44..8b9220e128a 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -537,14 +537,16 @@ static int set_gmidi_config(struct gmidi_device *dev, gfp_t gfp_flags)
 	struct usb_ep *ep;
 	unsigned i;
 
-	err = usb_ep_enable(dev->in_ep, &bulk_in_desc);
+	dev->in_ep->desc = &bulk_in_desc;
+	err = usb_ep_enable(dev->in_ep);
 	if (err) {
 		ERROR(dev, "can't start %s: %d\n", dev->in_ep->name, err);
 		goto fail;
 	}
 	dev->in_ep->driver_data = dev;
 
-	err = usb_ep_enable(dev->out_ep, &bulk_out_desc);
+	dev->out_ep->desc = &bulk_out_desc;
+	err = usb_ep_enable(dev->out_ep);
 	if (err) {
 		ERROR(dev, "can't start %s: %d\n", dev->out_ep->name, err);
 		goto fail;
@@ -693,6 +695,7 @@ static int gmidi_setup(struct usb_gadget *gadget,
 		switch (w_value >> 8) {
 
 		case USB_DT_DEVICE:
+			device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
 			value = min(w_length, (u16) sizeof(device_desc));
 			memcpy(req->buf, &device_desc, value);
 			break;
@@ -1247,8 +1250,6 @@ autoconf_fail:
 
 	dev->req->complete = gmidi_setup_complete;
 
-	device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-
 	gadget->ep0->driver_data = dev;
 
 	INFO(dev, "%s, version: " DRIVER_VERSION "\n", longname);
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index bf6e11c758d..7f87805cddc 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -996,8 +996,14 @@ static int goku_get_frame(struct usb_gadget *_gadget)
 	return -EOPNOTSUPP;
 }
 
+static int goku_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int goku_stop(struct usb_gadget_driver *driver);
+
 static const struct usb_gadget_ops goku_ops = {
 	.get_frame	= goku_get_frame,
+	.start		= goku_start,
+	.stop		= goku_stop,
 	// no remote wakeup
 	// not selfpowered
 };
@@ -1344,7 +1350,7 @@ static struct goku_udc	*the_controller;
  * disconnect is reported.  then a host may connect again, or
  * the driver might get unbound.
  */
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int goku_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct goku_udc	*dev = the_controller;
@@ -1382,7 +1388,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	DBG(dev, "registered gadget driver '%s'\n", driver->driver.name);
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
 static void
 stop_activity(struct goku_udc *dev, struct usb_gadget_driver *driver)
@@ -1408,7 +1413,7 @@ stop_activity(struct goku_udc *dev, struct usb_gadget_driver *driver)
 		udc_enable(dev);
 }
 
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int goku_stop(struct usb_gadget_driver *driver)
 {
 	struct goku_udc	*dev = the_controller;
 	unsigned long	flags;
@@ -1429,8 +1434,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	DBG(dev, "unregistered driver '%s'\n", driver->driver.name);
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
-
 
 /*-------------------------------------------------------------------------*/
 
@@ -1730,6 +1733,8 @@ static void goku_remove(struct pci_dev *pdev)
 
 	DBG(dev, "%s\n", __func__);
 
+	usb_del_gadget_udc(&dev->gadget);
+
 	BUG_ON(dev->driver);
 
 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
@@ -1854,6 +1859,10 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err;
 	}
 	dev->registered = 1;
+	retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
+	if (retval)
+		goto err;
+
 	return 0;
 
 err:
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
index 2523e54097b..9fb575034a0 100644
--- a/drivers/usb/gadget/hid.c
+++ b/drivers/usb/gadget/hid.c
@@ -255,6 +255,7 @@ static struct usb_composite_driver hidg_driver = {
 	.name		= "g_hid",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_HIGH,
 	.unbind		= __exit_p(hid_unbind),
 };
 
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index ade40066dec..692fd9b2248 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1237,9 +1237,14 @@ irq_handler_t intr_handler(int i)
  *******************************************************************************
  */
 
+static int imx_udc_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int imx_udc_stop(struct usb_gadget_driver *driver);
 static const struct usb_gadget_ops imx_udc_ops = {
 	.get_frame	 = imx_udc_get_frame,
 	.wakeup		 = imx_udc_wakeup,
+	.start		= imx_udc_start,
+	.stop		= imx_udc_stop,
 };
 
 static struct imx_udc_struct controller = {
@@ -1324,7 +1329,7 @@ static struct imx_udc_struct controller = {
  * USB gadget driver functions
  *******************************************************************************
  */
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int imx_udc_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct imx_udc_struct *imx_usb = &controller;
@@ -1368,9 +1373,8 @@ fail:
 	imx_usb->gadget.dev.driver = NULL;
 	return retval;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int imx_udc_stop(struct usb_gadget_driver *driver)
 {
 	struct imx_udc_struct *imx_usb = &controller;
 
@@ -1394,7 +1398,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
 /*******************************************************************************
  * Module functions
@@ -1504,8 +1507,14 @@ static int __init imx_udc_probe(struct platform_device *pdev)
 	imx_usb->timer.function = handle_config;
 	imx_usb->timer.data = (unsigned long)imx_usb;
 
-	return 0;
+	ret = usb_add_gadget_udc(&pdev->dev, &imx_usb->gadget);
+	if (ret)
+		goto fail4;
 
+	return 0;
+fail4:
+	for (i = 0; i < IMX_USB_NB_EP + 1; i++)
+		free_irq(imx_usb->usbd_int[i], imx_usb);
 fail3:
 	clk_put(clk);
 	clk_disable(clk);
@@ -1525,6 +1534,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev)
 	struct imxusb_platform_data *pdata = pdev->dev.platform_data;
 	int i;
 
+	usb_del_gadget_udc(&imx_usb->gadget);
 	imx_udc_disable(imx_usb);
 	del_timer(&imx_usb->timer);
 
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index a56876aaf76..1b240990448 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -832,14 +832,16 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 	switch (data->dev->gadget->speed) {
 	case USB_SPEED_LOW:
 	case USB_SPEED_FULL:
-		value = usb_ep_enable (ep, &data->desc);
+		ep->desc = &data->desc;
+		value = usb_ep_enable(ep);
 		if (value == 0)
 			data->state = STATE_EP_ENABLED;
 		break;
 #ifdef	CONFIG_USB_GADGET_DUALSPEED
 	case USB_SPEED_HIGH:
 		/* fails if caller didn't provide that descriptor... */
-		value = usb_ep_enable (ep, &data->hs_desc);
+		ep->desc = &data->hs_desc;
+		value = usb_ep_enable(ep);
 		if (value == 0)
 			data->state = STATE_EP_ENABLED;
 		break;
@@ -1345,7 +1347,7 @@ static void make_qualifier (struct dev_data *dev)
 	qual.bDeviceProtocol = desc->bDeviceProtocol;
 
 	/* assumes ep0 uses the same value for both speeds ... */
-	qual.bMaxPacketSize0 = desc->bMaxPacketSize0;
+	qual.bMaxPacketSize0 = dev->gadget->ep0->maxpacket;
 
 	qual.bNumConfigurations = 1;
 	qual.bRESERVED = 0;
@@ -1402,7 +1404,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 		}
 
 		dev->state = STATE_DEV_CONNECTED;
-		dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
 
 		INFO (dev, "connected\n");
 		event = next_event (dev, GADGETFS_CONNECT);
@@ -1430,6 +1431,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 
 		case USB_DT_DEVICE:
 			value = min (w_length, (u16) sizeof *dev->dev);
+			dev->dev->bMaxPacketSize0 = dev->gadget->ep0->maxpacket;
 			req->buf = dev->dev;
 			break;
 #ifdef	CONFIG_USB_GADGET_DUALSPEED
@@ -1710,7 +1712,6 @@ gadgetfs_bind (struct usb_gadget *gadget)
 	set_gadget_data (gadget, dev);
 	dev->gadget = gadget;
 	gadget->ep0->driver_data = dev;
-	dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
 
 	/* preallocate control response and buffer */
 	dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 9cee88a43a7..a06e2c27b43 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -593,8 +593,8 @@ static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
 		/* ep0 */
 		dev_vdbg(&dev->pdev->dev, "%s-%s\n", ep->name, DIR_STRING(ep));
 
-	dev_vdbg(&dev->pdev->dev, "ep_dqh[%d] addr: 0x%08x\n",
-			i, (u32)&(dev->ep_dqh[i]));
+	dev_vdbg(&dev->pdev->dev, "ep_dqh[%d] addr: 0x%p\n",
+			i, &(dev->ep_dqh[i]));
 
 	bit_mask = is_in(ep) ?
 		(1 << (ep->ep_num + 16)) : (1 << (ep->ep_num));
@@ -1321,7 +1321,9 @@ static int langwell_pullup(struct usb_gadget *_gadget, int is_on)
 	return 0;
 }
 
-
+static int langwell_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int langwell_stop(struct usb_gadget_driver *driver);
 /* device controller usb_gadget_ops structure */
 static const struct usb_gadget_ops langwell_ops = {
 
@@ -1342,6 +1344,9 @@ static const struct usb_gadget_ops langwell_ops = {
 
 	/* D+ pullup, software-controlled connect/disconnect to USB host */
 	.pullup		= langwell_pullup,
+
+	.start		= langwell_start,
+	.stop		= langwell_stop,
 };
 
 
@@ -1852,7 +1857,7 @@ static DEVICE_ATTR(remote_wakeup, S_IWUSR, NULL, store_remote_wakeup);
  * the driver might get unbound.
  */
 
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int langwell_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct langwell_udc	*dev = the_controller;
@@ -1914,11 +1919,9 @@ err_unbind:
 	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
 	return retval;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
-
 
 /* unregister gadget driver */
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int langwell_stop(struct usb_gadget_driver *driver)
 {
 	struct langwell_udc	*dev = the_controller;
 	unsigned long		flags;
@@ -1965,8 +1968,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
-
 
 /*-------------------------------------------------------------------------*/
 
@@ -3270,7 +3271,7 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 
 	/* allocate device dQH memory */
 	size = dev->ep_max * sizeof(struct langwell_dqh);
-	dev_vdbg(&dev->pdev->dev, "orig size = %d\n", size);
+	dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
 	if (size < DQH_ALIGNMENT)
 		size = DQH_ALIGNMENT;
 	else if ((size % DQH_ALIGNMENT) != 0) {
@@ -3285,7 +3286,7 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 		goto error;
 	}
 	dev->ep_dqh_size = size;
-	dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %d\n", dev->ep_dqh_size);
+	dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
 
 	/* initialize ep0 status request structure */
 	dev->status_req = kzalloc(sizeof(struct langwell_request), GFP_KERNEL);
@@ -3373,6 +3374,10 @@ static int langwell_udc_probe(struct pci_dev *pdev,
 	if (retval)
 		goto error;
 
+	retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
+	if (retval)
+		goto error;
+
 	retval = device_create_file(&pdev->dev, &dev_attr_langwell_udc);
 	if (retval)
 		goto error;
@@ -3403,6 +3408,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
+	usb_del_gadget_udc(&dev->gadget);
 	/* disable interrupt and set controller to stop state */
 	langwell_udc_stop(dev);
 
@@ -3464,7 +3470,7 @@ static int langwell_udc_resume(struct pci_dev *pdev)
 
 	/* allocate device dQH memory */
 	size = dev->ep_max * sizeof(struct langwell_dqh);
-	dev_vdbg(&dev->pdev->dev, "orig size = %d\n", size);
+	dev_vdbg(&dev->pdev->dev, "orig size = %zd\n", size);
 	if (size < DQH_ALIGNMENT)
 		size = DQH_ALIGNMENT;
 	else if ((size % DQH_ALIGNMENT) != 0) {
@@ -3478,7 +3484,7 @@ static int langwell_udc_resume(struct pci_dev *pdev)
 		return -ENOMEM;
 	}
 	dev->ep_dqh_size = size;
-	dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %d\n", dev->ep_dqh_size);
+	dev_vdbg(&dev->pdev->dev, "ep_dqh_size = %zd\n", dev->ep_dqh_size);
 
 	/* create dTD dma_pool resource */
 	dev->dtd_pool = dma_pool_create("langwell_dtd",
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 084aa080a2d..491f825ed5c 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2006-2007 Renesas Solutions Corp.
  *
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -691,6 +691,7 @@ static void init_controller(struct m66592 *m66592)
 
 static void disable_controller(struct m66592 *m66592)
 {
+	m66592_bclr(m66592, M66592_UTST, M66592_TESTMODE);
 	if (!m66592->pdata->on_chip) {
 		m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG);
 		udelay(1);
@@ -780,7 +781,7 @@ static void irq_ep0_write(struct m66592_ep *ep, struct m66592_request *req)
 	/* write fifo */
 	if (req->req.buf) {
 		if (size > 0)
-			m66592_write_fifo(m66592, ep->fifoaddr, buf, size);
+			m66592_write_fifo(m66592, ep, buf, size);
 		if ((size == 0) || ((size % ep->ep.maxpacket) != 0))
 			m66592_bset(m66592, M66592_BVAL, ep->fifoctr);
 	}
@@ -826,7 +827,7 @@ static void irq_packet_write(struct m66592_ep *ep, struct m66592_request *req)
 
 	/* write fifo */
 	if (req->req.buf) {
-		m66592_write_fifo(m66592, ep->fifoaddr, buf, size);
+		m66592_write_fifo(m66592, ep, buf, size);
 		if ((size == 0)
 				|| ((size % ep->ep.maxpacket) != 0)
 				|| ((bufsize != ep->ep.maxpacket)
@@ -1048,10 +1049,30 @@ static void clear_feature(struct m66592 *m66592, struct usb_ctrlrequest *ctrl)
 
 static void set_feature(struct m66592 *m66592, struct usb_ctrlrequest *ctrl)
 {
+	u16 tmp;
+	int timeout = 3000;
 
 	switch (ctrl->bRequestType & USB_RECIP_MASK) {
 	case USB_RECIP_DEVICE:
-		control_end(m66592, 1);
+		switch (le16_to_cpu(ctrl->wValue)) {
+		case USB_DEVICE_TEST_MODE:
+			control_end(m66592, 1);
+			/* Wait for the completion of status stage */
+			do {
+				tmp = m66592_read(m66592, M66592_INTSTS0) &
+								M66592_CTSQ;
+				udelay(1);
+			} while (tmp != M66592_CS_IDST || timeout-- > 0);
+
+			if (tmp == M66592_CS_IDST)
+				m66592_bset(m66592,
+					    le16_to_cpu(ctrl->wIndex >> 8),
+					    M66592_TESTMODE);
+			break;
+		default:
+			pipe_stall(m66592, 0);
+			break;
+		}
 		break;
 	case USB_RECIP_INTERFACE:
 		control_end(m66592, 1);
@@ -1454,7 +1475,7 @@ static struct usb_ep_ops m66592_ep_ops = {
 /*-------------------------------------------------------------------------*/
 static struct m66592 *the_controller;
 
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int m66592_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct m66592 *m66592 = the_controller;
@@ -1506,9 +1527,8 @@ error:
 
 	return retval;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int m66592_stop(struct usb_gadget_driver *driver)
 {
 	struct m66592 *m66592 = the_controller;
 	unsigned long flags;
@@ -1533,7 +1553,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	m66592->driver = NULL;
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
 /*-------------------------------------------------------------------------*/
 static int m66592_get_frame(struct usb_gadget *_gadget)
@@ -1542,14 +1561,34 @@ static int m66592_get_frame(struct usb_gadget *_gadget)
 	return m66592_read(m66592, M66592_FRMNUM) & 0x03FF;
 }
 
+static int m66592_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct m66592 *m66592 = gadget_to_m66592(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&m66592->lock, flags);
+	if (is_on)
+		m66592_bset(m66592, M66592_DPRPU, M66592_SYSCFG);
+	else
+		m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
+	spin_unlock_irqrestore(&m66592->lock, flags);
+
+	return 0;
+}
+
 static struct usb_gadget_ops m66592_gadget_ops = {
 	.get_frame		= m66592_get_frame,
+	.start			= m66592_start,
+	.stop			= m66592_stop,
+	.pullup			= m66592_pullup,
 };
 
 static int __exit m66592_remove(struct platform_device *pdev)
 {
 	struct m66592		*m66592 = dev_get_drvdata(&pdev->dev);
 
+	usb_del_gadget_udc(&m66592->gadget);
+
 	del_timer_sync(&m66592->timer);
 	iounmap(m66592->reg);
 	free_irq(platform_get_irq(pdev, 0), m66592);
@@ -1691,9 +1730,16 @@ static int __init m66592_probe(struct platform_device *pdev)
 
 	init_controller(m66592);
 
+	ret = usb_add_gadget_udc(&pdev->dev, &m66592->gadget);
+	if (ret)
+		goto err_add_udc;
+
 	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
 	return 0;
 
+err_add_udc:
+	m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req);
+
 clean_up3:
 #ifdef CONFIG_HAVE_CLK
 	if (m66592->pdata->on_chip) {
diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
index c3caf1ac73c..7b93d579af3 100644
--- a/drivers/usb/gadget/m66592-udc.h
+++ b/drivers/usb/gadget/m66592-udc.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2006-2007 Renesas Solutions Corp.
  *
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -561,11 +561,26 @@ static inline void m66592_write(struct m66592 *m66592, u16 val,
 	iowrite16(val, m66592->reg + offset);
 }
 
+static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat,
+		unsigned long offset)
+{
+	u16 tmp;
+	tmp = m66592_read(m66592, offset);
+	tmp = tmp & (~pat);
+	tmp = tmp | val;
+	m66592_write(m66592, tmp, offset);
+}
+
+#define m66592_bclr(m66592, val, offset)	\
+			m66592_mdfy(m66592, 0, val, offset)
+#define m66592_bset(m66592, val, offset)	\
+			m66592_mdfy(m66592, val, 0, offset)
+
 static inline void m66592_write_fifo(struct m66592 *m66592,
-		unsigned long offset,
+		struct m66592_ep *ep,
 		void *buf, unsigned long len)
 {
-	void __iomem *fifoaddr = m66592->reg + offset;
+	void __iomem *fifoaddr = m66592->reg + ep->fifoaddr;
 
 	if (m66592->pdata->on_chip) {
 		unsigned long count;
@@ -591,26 +606,15 @@ static inline void m66592_write_fifo(struct m66592 *m66592,
 		iowrite16_rep(fifoaddr, buf, len);
 		if (odd) {
 			unsigned char *p = buf + len*2;
+			if (m66592->pdata->wr0_shorted_to_wr1)
+				m66592_bclr(m66592, M66592_MBW_16, ep->fifosel);
 			iowrite8(*p, fifoaddr);
+			if (m66592->pdata->wr0_shorted_to_wr1)
+				m66592_bset(m66592, M66592_MBW_16, ep->fifosel);
 		}
 	}
 }
 
-static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat,
-		unsigned long offset)
-{
-	u16 tmp;
-	tmp = m66592_read(m66592, offset);
-	tmp = tmp & (~pat);
-	tmp = tmp | val;
-	m66592_write(m66592, tmp, offset);
-}
-
-#define m66592_bclr(m66592, val, offset)	\
-			m66592_mdfy(m66592, 0, val, offset)
-#define m66592_bset(m66592, val, offset)	\
-			m66592_mdfy(m66592, val, 0, offset)
-
 #endif	/* ifndef __M66592_UDC_H__ */
 
 
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 01822422c3e..d3eb27427c5 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -169,6 +169,7 @@ static struct usb_composite_driver msg_driver = {
 	.name		= "g_mass_storage",
 	.dev		= &msg_device_desc,
 	.iProduct	= DRIVER_DESC,
+	.max_speed	= USB_SPEED_HIGH,
 	.needs_serial	= 1,
 };
 
diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c
index d9feced348e..8c7b74717d8 100644
--- a/drivers/usb/gadget/multi.c
+++ b/drivers/usb/gadget/multi.c
@@ -351,6 +351,7 @@ static struct usb_composite_driver multi_driver = {
 	.name		= "g_multi",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_HIGH,
 	.unbind		= __exit_p(multi_unbind),
 	.iProduct	= DRIVER_DESC,
 	.needs_serial	= 1,
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index b1a8146b9d5..ce1ac2bcb31 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -1128,6 +1128,9 @@ static int mv_udc_pullup(struct usb_gadget *gadget, int is_on)
 	return 0;
 }
 
+static int mv_udc_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int mv_udc_stop(struct usb_gadget_driver *driver);
 /* device controller usb_gadget_ops structure */
 static const struct usb_gadget_ops mv_ops = {
 
@@ -1139,6 +1142,8 @@ static const struct usb_gadget_ops mv_ops = {
 
 	/* D+ pullup, software-controlled connect/disconnect to USB host */
 	.pullup		= mv_udc_pullup,
+	.start		= mv_udc_start,
+	.stop		= mv_udc_stop,
 };
 
 static void mv_udc_testmode(struct mv_udc *udc, u16 index, bool enter)
@@ -1230,7 +1235,7 @@ static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver)
 	}
 }
 
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int mv_udc_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct mv_udc *udc = the_controller;
@@ -1270,9 +1275,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int mv_udc_stop(struct usb_gadget_driver *driver)
 {
 	struct mv_udc *udc = the_controller;
 	unsigned long flags;
@@ -1296,7 +1300,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
 static int
 udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
@@ -1880,9 +1883,10 @@ static void gadget_release(struct device *_dev)
 static int mv_udc_remove(struct platform_device *dev)
 {
 	struct mv_udc *udc = the_controller;
-
 	DECLARE_COMPLETION(done);
 
+	usb_del_gadget_udc(&udc->gadget);
+
 	udc->done = &done;
 
 	/* free memory allocated in probe */
@@ -2074,11 +2078,12 @@ int mv_udc_probe(struct platform_device *dev)
 
 	the_controller = udc;
 
-	goto out;
+	retval = usb_add_gadget_udc(&dev->dev, &udc->gadget);
+	if (!retval)
+		return retval;
 error:
 	if (udc)
 		mv_udc_remove(udc->dev);
-out:
 	return retval;
 }
 
@@ -2126,7 +2131,7 @@ static struct platform_driver udc_driver = {
 #endif
 	},
 };
-
+MODULE_ALIAS("platform:pxa-u2o");
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Chao Xie <chao.xie@marvell.com>");
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
index 99c179ad729..62ee5087dca 100644
--- a/drivers/usb/gadget/ncm.c
+++ b/drivers/usb/gadget/ncm.c
@@ -228,6 +228,7 @@ static struct usb_composite_driver ncm_driver = {
 	.name		= "g_ncm",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_HIGH,
 	.unbind		= __exit_p(gncm_unbind),
 };
 
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
new file mode 100644
index 00000000000..7c7b0e120d8
--- /dev/null
+++ b/drivers/usb/gadget/net2272.c
@@ -0,0 +1,2752 @@
+/*
+ * Driver for PLX NET2272 USB device controller
+ *
+ * Copyright (C) 2005-2006 PLX Technology, Inc.
+ * Copyright (C) 2006-2011 Analog Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <asm/byteorder.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+
+#include "net2272.h"
+
+#define DRIVER_DESC "PLX NET2272 USB Peripheral Controller"
+
+static const char driver_name[] = "net2272";
+static const char driver_vers[] = "2006 October 17/mainline";
+static const char driver_desc[] = DRIVER_DESC;
+
+static const char ep0name[] = "ep0";
+static const char * const ep_name[] = {
+	ep0name,
+	"ep-a", "ep-b", "ep-c",
+};
+
+#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
+#ifdef CONFIG_USB_GADGET_NET2272_DMA
+/*
+ * use_dma: the NET2272 can use an external DMA controller.
+ * Note that since there is no generic DMA api, some functions,
+ * notably request_dma, start_dma, and cancel_dma will need to be
+ * modified for your platform's particular dma controller.
+ *
+ * If use_dma is disabled, pio will be used instead.
+ */
+static int use_dma = 0;
+module_param(use_dma, bool, 0644);
+
+/*
+ * dma_ep: selects the endpoint for use with dma (1=ep-a, 2=ep-b)
+ * The NET2272 can only use dma for a single endpoint at a time.
+ * At some point this could be modified to allow either endpoint
+ * to take control of dma as it becomes available.
+ *
+ * Note that DMA should not be used on OUT endpoints unless it can
+ * be guaranteed that no short packets will arrive on an IN endpoint
+ * while the DMA operation is pending.  Otherwise the OUT DMA will
+ * terminate prematurely (See NET2272 Errata 630-0213-0101)
+ */
+static ushort dma_ep = 1;
+module_param(dma_ep, ushort, 0644);
+
+/*
+ * dma_mode: net2272 dma mode setting (see LOCCTL1 definiton):
+ *	mode 0 == Slow DREQ mode
+ *	mode 1 == Fast DREQ mode
+ *	mode 2 == Burst mode
+ */
+static ushort dma_mode = 2;
+module_param(dma_mode, ushort, 0644);
+#else
+#define use_dma 0
+#define dma_ep 1
+#define dma_mode 2
+#endif
+
+/*
+ * fifo_mode: net2272 buffer configuration:
+ *      mode 0 == ep-{a,b,c} 512db each
+ *      mode 1 == ep-a 1k, ep-{b,c} 512db
+ *      mode 2 == ep-a 1k, ep-b 1k, ep-c 512db
+ *      mode 3 == ep-a 1k, ep-b disabled, ep-c 512db
+ */
+static ushort fifo_mode = 0;
+module_param(fifo_mode, ushort, 0644);
+
+/*
+ * enable_suspend: When enabled, the driver will respond to
+ * USB suspend requests by powering down the NET2272.  Otherwise,
+ * USB suspend requests will be ignored.  This is acceptible for
+ * self-powered devices.  For bus powered devices set this to 1.
+ */
+static ushort enable_suspend = 0;
+module_param(enable_suspend, ushort, 0644);
+
+static void assert_out_naking(struct net2272_ep *ep, const char *where)
+{
+	u8 tmp;
+
+#ifndef DEBUG
+	return;
+#endif
+
+	tmp = net2272_ep_read(ep, EP_STAT0);
+	if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) {
+		dev_dbg(ep->dev->dev, "%s %s %02x !NAK\n",
+			ep->ep.name, where, tmp);
+		net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS);
+	}
+}
+#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep, __func__)
+
+static void stop_out_naking(struct net2272_ep *ep)
+{
+	u8 tmp = net2272_ep_read(ep, EP_STAT0);
+
+	if ((tmp & (1 << NAK_OUT_PACKETS)) != 0)
+		net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS);
+}
+
+#define PIPEDIR(bAddress) (usb_pipein(bAddress) ? "in" : "out")
+
+static char *type_string(u8 bmAttributes)
+{
+	switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK: return "bulk";
+	case USB_ENDPOINT_XFER_ISOC: return "iso";
+	case USB_ENDPOINT_XFER_INT:  return "intr";
+	default:                     return "control";
+	}
+}
+
+static char *buf_state_string(unsigned state)
+{
+	switch (state) {
+	case BUFF_FREE:  return "free";
+	case BUFF_VALID: return "valid";
+	case BUFF_LCL:   return "local";
+	case BUFF_USB:   return "usb";
+	default:         return "unknown";
+	}
+}
+
+static char *dma_mode_string(void)
+{
+	if (!use_dma)
+		return "PIO";
+	switch (dma_mode) {
+	case 0:  return "SLOW DREQ";
+	case 1:  return "FAST DREQ";
+	case 2:  return "BURST";
+	default: return "invalid";
+	}
+}
+
+static void net2272_dequeue_all(struct net2272_ep *);
+static int net2272_kick_dma(struct net2272_ep *, struct net2272_request *);
+static int net2272_fifo_status(struct usb_ep *);
+
+static struct usb_ep_ops net2272_ep_ops;
+
+/*---------------------------------------------------------------------------*/
+
+static int
+net2272_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+	struct net2272 *dev;
+	struct net2272_ep *ep;
+	u32 max;
+	u8 tmp;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || !desc || ep->desc || _ep->name == ep0name
+			|| desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+	dev = ep->dev;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	_ep->maxpacket = max & 0x7fff;
+	ep->desc = desc;
+
+	/* net2272_ep_reset() has already been called */
+	ep->stopped = 0;
+	ep->wedged = 0;
+
+	/* set speed-dependent max packet */
+	net2272_ep_write(ep, EP_MAXPKT0, max & 0xff);
+	net2272_ep_write(ep, EP_MAXPKT1, (max & 0xff00) >> 8);
+
+	/* set type, direction, address; reset fifo counters */
+	net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH);
+	tmp = usb_endpoint_type(desc);
+	if (usb_endpoint_xfer_bulk(desc)) {
+		/* catch some particularly blatant driver bugs */
+		if ((dev->gadget.speed == USB_SPEED_HIGH && max != 512) ||
+		    (dev->gadget.speed == USB_SPEED_FULL && max > 64)) {
+			spin_unlock_irqrestore(&dev->lock, flags);
+			return -ERANGE;
+		}
+	}
+	ep->is_iso = usb_endpoint_xfer_isoc(desc) ? 1 : 0;
+	tmp <<= ENDPOINT_TYPE;
+	tmp |= ((desc->bEndpointAddress & 0x0f) << ENDPOINT_NUMBER);
+	tmp |= usb_endpoint_dir_in(desc) << ENDPOINT_DIRECTION;
+	tmp |= (1 << ENDPOINT_ENABLE);
+
+	/* for OUT transfers, block the rx fifo until a read is posted */
+	ep->is_in = usb_endpoint_dir_in(desc);
+	if (!ep->is_in)
+		net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS);
+
+	net2272_ep_write(ep, EP_CFG, tmp);
+
+	/* enable irqs */
+	tmp = (1 << ep->num) | net2272_read(dev, IRQENB0);
+	net2272_write(dev, IRQENB0, tmp);
+
+	tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
+		| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
+		| net2272_ep_read(ep, EP_IRQENB);
+	net2272_ep_write(ep, EP_IRQENB, tmp);
+
+	tmp = desc->bEndpointAddress;
+	dev_dbg(dev->dev, "enabled %s (ep%d%s-%s) max %04x cfg %02x\n",
+		_ep->name, tmp & 0x0f, PIPEDIR(tmp),
+		type_string(desc->bmAttributes), max,
+		net2272_ep_read(ep, EP_CFG));
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return 0;
+}
+
+static void net2272_ep_reset(struct net2272_ep *ep)
+{
+	u8 tmp;
+
+	ep->desc = NULL;
+	INIT_LIST_HEAD(&ep->queue);
+
+	ep->ep.maxpacket = ~0;
+	ep->ep.ops = &net2272_ep_ops;
+
+	/* disable irqs, endpoint */
+	net2272_ep_write(ep, EP_IRQENB, 0);
+
+	/* init to our chosen defaults, notably so that we NAK OUT
+	 * packets until the driver queues a read.
+	 */
+	tmp = (1 << NAK_OUT_PACKETS_MODE) | (1 << ALT_NAK_OUT_PACKETS);
+	net2272_ep_write(ep, EP_RSPSET, tmp);
+
+	tmp = (1 << INTERRUPT_MODE) | (1 << HIDE_STATUS_PHASE);
+	if (ep->num != 0)
+		tmp |= (1 << ENDPOINT_TOGGLE) | (1 << ENDPOINT_HALT);
+
+	net2272_ep_write(ep, EP_RSPCLR, tmp);
+
+	/* scrub most status bits, and flush any fifo state */
+	net2272_ep_write(ep, EP_STAT0,
+			  (1 << DATA_IN_TOKEN_INTERRUPT)
+			| (1 << DATA_OUT_TOKEN_INTERRUPT)
+			| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)
+			| (1 << DATA_PACKET_RECEIVED_INTERRUPT)
+			| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT));
+
+	net2272_ep_write(ep, EP_STAT1,
+			    (1 << TIMEOUT)
+			  | (1 << USB_OUT_ACK_SENT)
+			  | (1 << USB_OUT_NAK_SENT)
+			  | (1 << USB_IN_ACK_RCVD)
+			  | (1 << USB_IN_NAK_SENT)
+			  | (1 << USB_STALL_SENT)
+			  | (1 << LOCAL_OUT_ZLP)
+			  | (1 << BUFFER_FLUSH));
+
+	/* fifo size is handled seperately */
+}
+
+static int net2272_disable(struct usb_ep *_ep)
+{
+	struct net2272_ep *ep;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || !ep->desc || _ep->name == ep0name)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	net2272_dequeue_all(ep);
+	net2272_ep_reset(ep);
+
+	dev_vdbg(ep->dev->dev, "disabled %s\n", _ep->name);
+
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return 0;
+}
+
+/*---------------------------------------------------------------------------*/
+
+static struct usb_request *
+net2272_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct net2272_ep *ep;
+	struct net2272_request *req;
+
+	if (!_ep)
+		return NULL;
+	ep = container_of(_ep, struct net2272_ep, ep);
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	req->req.dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void
+net2272_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct net2272_ep *ep;
+	struct net2272_request *req;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || !_req)
+		return;
+
+	req = container_of(_req, struct net2272_request, req);
+	WARN_ON(!list_empty(&req->queue));
+	kfree(req);
+}
+
+static void
+net2272_done(struct net2272_ep *ep, struct net2272_request *req, int status)
+{
+	struct net2272 *dev;
+	unsigned stopped = ep->stopped;
+
+	if (ep->num == 0) {
+		if (ep->dev->protocol_stall) {
+			ep->stopped = 1;
+			set_halt(ep);
+		}
+		allow_status(ep);
+	}
+
+	list_del_init(&req->queue);
+
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	dev = ep->dev;
+	if (use_dma && req->mapped) {
+		dma_unmap_single(dev->dev, req->req.dma, req->req.length,
+			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->req.dma = DMA_ADDR_INVALID;
+		req->mapped = 0;
+	}
+
+	if (status && status != -ESHUTDOWN)
+		dev_vdbg(dev->dev, "complete %s req %p stat %d len %u/%u buf %p\n",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length, req->req.buf);
+
+	/* don't modify queue heads during completion callback */
+	ep->stopped = 1;
+	spin_unlock(&dev->lock);
+	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&dev->lock);
+	ep->stopped = stopped;
+}
+
+static int
+net2272_write_packet(struct net2272_ep *ep, u8 *buf,
+	struct net2272_request *req, unsigned max)
+{
+	u16 __iomem *ep_data = net2272_reg_addr(ep->dev, EP_DATA);
+	u16 *bufp;
+	unsigned length, count;
+	u8 tmp;
+
+	length = min(req->req.length - req->req.actual, max);
+	req->req.actual += length;
+
+	dev_vdbg(ep->dev->dev, "write packet %s req %p max %u len %u avail %u\n",
+		ep->ep.name, req, max, length,
+		(net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0));
+
+	count = length;
+	bufp = (u16 *)buf;
+
+	while (likely(count >= 2)) {
+		/* no byte-swap required; chip endian set during init */
+		writew(*bufp++, ep_data);
+		count -= 2;
+	}
+	buf = (u8 *)bufp;
+
+	/* write final byte by placing the NET2272 into 8-bit mode */
+	if (unlikely(count)) {
+		tmp = net2272_read(ep->dev, LOCCTL);
+		net2272_write(ep->dev, LOCCTL, tmp & ~(1 << DATA_WIDTH));
+		writeb(*buf, ep_data);
+		net2272_write(ep->dev, LOCCTL, tmp);
+	}
+	return length;
+}
+
+/* returns: 0: still running, 1: completed, negative: errno */
+static int
+net2272_write_fifo(struct net2272_ep *ep, struct net2272_request *req)
+{
+	u8 *buf;
+	unsigned count, max;
+	int status;
+
+	dev_vdbg(ep->dev->dev, "write_fifo %s actual %d len %d\n",
+		ep->ep.name, req->req.actual, req->req.length);
+
+	/*
+	 * Keep loading the endpoint until the final packet is loaded,
+	 * or the endpoint buffer is full.
+	 */
+ top:
+	/*
+	 * Clear interrupt status
+	 *  - Packet Transmitted interrupt will become set again when the
+	 *    host successfully takes another packet
+	 */
+	net2272_ep_write(ep, EP_STAT0, (1 << DATA_PACKET_TRANSMITTED_INTERRUPT));
+	while (!(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_FULL))) {
+		buf = req->req.buf + req->req.actual;
+		prefetch(buf);
+
+		/* force pagesel */
+		net2272_ep_read(ep, EP_STAT0);
+
+		max = (net2272_ep_read(ep, EP_AVAIL1) << 8) |
+			(net2272_ep_read(ep, EP_AVAIL0));
+
+		if (max < ep->ep.maxpacket)
+			max = (net2272_ep_read(ep, EP_AVAIL1) << 8)
+				| (net2272_ep_read(ep, EP_AVAIL0));
+
+		count = net2272_write_packet(ep, buf, req, max);
+		/* see if we are done */
+		if (req->req.length == req->req.actual) {
+			/* validate short or zlp packet */
+			if (count < ep->ep.maxpacket)
+				set_fifo_bytecount(ep, 0);
+			net2272_done(ep, req, 0);
+
+			if (!list_empty(&ep->queue)) {
+				req = list_entry(ep->queue.next,
+						struct net2272_request,
+						queue);
+				status = net2272_kick_dma(ep, req);
+
+				if (status < 0)
+					if ((net2272_ep_read(ep, EP_STAT0)
+							& (1 << BUFFER_EMPTY)))
+						goto top;
+			}
+			return 1;
+		}
+		net2272_ep_write(ep, EP_STAT0, (1 << DATA_PACKET_TRANSMITTED_INTERRUPT));
+	}
+	return 0;
+}
+
+static void
+net2272_out_flush(struct net2272_ep *ep)
+{
+	ASSERT_OUT_NAKING(ep);
+
+	net2272_ep_write(ep, EP_STAT0, (1 << DATA_OUT_TOKEN_INTERRUPT)
+			| (1 << DATA_PACKET_RECEIVED_INTERRUPT));
+	net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH);
+}
+
+static int
+net2272_read_packet(struct net2272_ep *ep, u8 *buf,
+	struct net2272_request *req, unsigned avail)
+{
+	u16 __iomem *ep_data = net2272_reg_addr(ep->dev, EP_DATA);
+	unsigned is_short;
+	u16 *bufp;
+
+	req->req.actual += avail;
+
+	dev_vdbg(ep->dev->dev, "read packet %s req %p len %u avail %u\n",
+		ep->ep.name, req, avail,
+		(net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0));
+
+	is_short = (avail < ep->ep.maxpacket);
+
+	if (unlikely(avail == 0)) {
+		/* remove any zlp from the buffer */
+		(void)readw(ep_data);
+		return is_short;
+	}
+
+	/* Ensure we get the final byte */
+	if (unlikely(avail % 2))
+		avail++;
+	bufp = (u16 *)buf;
+
+	do {
+		*bufp++ = readw(ep_data);
+		avail -= 2;
+	} while (avail);
+
+	/*
+	 * To avoid false endpoint available race condition must read
+	 * ep stat0 twice in the case of a short transfer
+	 */
+	if (net2272_ep_read(ep, EP_STAT0) & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT))
+		net2272_ep_read(ep, EP_STAT0);
+
+	return is_short;
+}
+
+static int
+net2272_read_fifo(struct net2272_ep *ep, struct net2272_request *req)
+{
+	u8 *buf;
+	unsigned is_short;
+	int count;
+	int tmp;
+	int cleanup = 0;
+	int status = -1;
+
+	dev_vdbg(ep->dev->dev, "read_fifo %s actual %d len %d\n",
+		ep->ep.name, req->req.actual, req->req.length);
+
+ top:
+	do {
+		buf = req->req.buf + req->req.actual;
+		prefetchw(buf);
+
+		count = (net2272_ep_read(ep, EP_AVAIL1) << 8)
+			| net2272_ep_read(ep, EP_AVAIL0);
+
+		net2272_ep_write(ep, EP_STAT0,
+			(1 << SHORT_PACKET_TRANSFERRED_INTERRUPT) |
+			(1 << DATA_PACKET_RECEIVED_INTERRUPT));
+
+		tmp = req->req.length - req->req.actual;
+
+		if (count > tmp) {
+			if ((tmp % ep->ep.maxpacket) != 0) {
+				dev_err(ep->dev->dev,
+					"%s out fifo %d bytes, expected %d\n",
+					ep->ep.name, count, tmp);
+				cleanup = 1;
+			}
+			count = (tmp > 0) ? tmp : 0;
+		}
+
+		is_short = net2272_read_packet(ep, buf, req, count);
+
+		/* completion */
+		if (unlikely(cleanup || is_short ||
+				((req->req.actual == req->req.length)
+				 && !req->req.zero))) {
+
+			if (cleanup) {
+				net2272_out_flush(ep);
+				net2272_done(ep, req, -EOVERFLOW);
+			} else
+				net2272_done(ep, req, 0);
+
+			/* re-initialize endpoint transfer registers
+			 * otherwise they may result in erroneous pre-validation
+			 * for subsequent control reads
+			 */
+			if (unlikely(ep->num == 0)) {
+				net2272_ep_write(ep, EP_TRANSFER2, 0);
+				net2272_ep_write(ep, EP_TRANSFER1, 0);
+				net2272_ep_write(ep, EP_TRANSFER0, 0);
+			}
+
+			if (!list_empty(&ep->queue)) {
+				req = list_entry(ep->queue.next,
+					struct net2272_request, queue);
+				status = net2272_kick_dma(ep, req);
+				if ((status < 0) &&
+				    !(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_EMPTY)))
+					goto top;
+			}
+			return 1;
+		}
+	} while (!(net2272_ep_read(ep, EP_STAT0) & (1 << BUFFER_EMPTY)));
+
+	return 0;
+}
+
+static void
+net2272_pio_advance(struct net2272_ep *ep)
+{
+	struct net2272_request *req;
+
+	if (unlikely(list_empty(&ep->queue)))
+		return;
+
+	req = list_entry(ep->queue.next, struct net2272_request, queue);
+	(ep->is_in ? net2272_write_fifo : net2272_read_fifo)(ep, req);
+}
+
+/* returns 0 on success, else negative errno */
+static int
+net2272_request_dma(struct net2272 *dev, unsigned ep, u32 buf,
+	unsigned len, unsigned dir)
+{
+	dev_vdbg(dev->dev, "request_dma ep %d buf %08x len %d dir %d\n",
+		ep, buf, len, dir);
+
+	/* The NET2272 only supports a single dma channel */
+	if (dev->dma_busy)
+		return -EBUSY;
+	/*
+	 * EP_TRANSFER (used to determine the number of bytes received
+	 * in an OUT transfer) is 24 bits wide; don't ask for more than that.
+	 */
+	if ((dir == 1) && (len > 0x1000000))
+		return -EINVAL;
+
+	dev->dma_busy = 1;
+
+	/* initialize platform's dma */
+#ifdef CONFIG_PCI
+	/* NET2272 addr, buffer addr, length, etc. */
+	switch (dev->dev_id) {
+	case PCI_DEVICE_ID_RDK1:
+		/* Setup PLX 9054 DMA mode */
+		writel((1 << LOCAL_BUS_WIDTH) |
+			(1 << TA_READY_INPUT_ENABLE) |
+			(0 << LOCAL_BURST_ENABLE) |
+			(1 << DONE_INTERRUPT_ENABLE) |
+			(1 << LOCAL_ADDRESSING_MODE) |
+			(1 << DEMAND_MODE) |
+			(1 << DMA_EOT_ENABLE) |
+			(1 << FAST_SLOW_TERMINATE_MODE_SELECT) |
+			(1 << DMA_CHANNEL_INTERRUPT_SELECT),
+			dev->rdk1.plx9054_base_addr + DMAMODE0);
+
+		writel(0x100000, dev->rdk1.plx9054_base_addr + DMALADR0);
+		writel(buf, dev->rdk1.plx9054_base_addr + DMAPADR0);
+		writel(len, dev->rdk1.plx9054_base_addr + DMASIZ0);
+		writel((dir << DIRECTION_OF_TRANSFER) |
+			(1 << INTERRUPT_AFTER_TERMINAL_COUNT),
+			dev->rdk1.plx9054_base_addr + DMADPR0);
+		writel((1 << LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE) |
+			readl(dev->rdk1.plx9054_base_addr + INTCSR),
+			dev->rdk1.plx9054_base_addr + INTCSR);
+
+		break;
+	}
+#endif
+
+	net2272_write(dev, DMAREQ,
+		(0 << DMA_BUFFER_VALID) |
+		(1 << DMA_REQUEST_ENABLE) |
+		(1 << DMA_CONTROL_DACK) |
+		(dev->dma_eot_polarity << EOT_POLARITY) |
+		(dev->dma_dack_polarity << DACK_POLARITY) |
+		(dev->dma_dreq_polarity << DREQ_POLARITY) |
+		((ep >> 1) << DMA_ENDPOINT_SELECT));
+
+	(void) net2272_read(dev, SCRATCH);
+
+	return 0;
+}
+
+static void
+net2272_start_dma(struct net2272 *dev)
+{
+	/* start platform's dma controller */
+#ifdef CONFIG_PCI
+	switch (dev->dev_id) {
+	case PCI_DEVICE_ID_RDK1:
+		writeb((1 << CHANNEL_ENABLE) | (1 << CHANNEL_START),
+			dev->rdk1.plx9054_base_addr + DMACSR0);
+		break;
+	}
+#endif
+}
+
+/* returns 0 on success, else negative errno */
+static int
+net2272_kick_dma(struct net2272_ep *ep, struct net2272_request *req)
+{
+	unsigned size;
+	u8 tmp;
+
+	if (!use_dma || (ep->num < 1) || (ep->num > 2) || !ep->dma)
+		return -EINVAL;
+
+	/* don't use dma for odd-length transfers
+	 * otherwise, we'd need to deal with the last byte with pio
+	 */
+	if (req->req.length & 1)
+		return -EINVAL;
+
+	dev_vdbg(ep->dev->dev, "kick_dma %s req %p dma %08llx\n",
+		ep->ep.name, req, (unsigned long long) req->req.dma);
+
+	net2272_ep_write(ep, EP_RSPSET, 1 << ALT_NAK_OUT_PACKETS);
+
+	/* The NET2272 can only use DMA on one endpoint at a time */
+	if (ep->dev->dma_busy)
+		return -EBUSY;
+
+	/* Make sure we only DMA an even number of bytes (we'll use
+	 * pio to complete the transfer)
+	 */
+	size = req->req.length;
+	size &= ~1;
+
+	/* device-to-host transfer */
+	if (ep->is_in) {
+		/* initialize platform's dma controller */
+		if (net2272_request_dma(ep->dev, ep->num, req->req.dma, size, 0))
+			/* unable to obtain DMA channel; return error and use pio mode */
+			return -EBUSY;
+		req->req.actual += size;
+
+	/* host-to-device transfer */
+	} else {
+		tmp = net2272_ep_read(ep, EP_STAT0);
+
+		/* initialize platform's dma controller */
+		if (net2272_request_dma(ep->dev, ep->num, req->req.dma, size, 1))
+			/* unable to obtain DMA channel; return error and use pio mode */
+			return -EBUSY;
+
+		if (!(tmp & (1 << BUFFER_EMPTY)))
+			ep->not_empty = 1;
+		else
+			ep->not_empty = 0;
+
+
+		/* allow the endpoint's buffer to fill */
+		net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS);
+
+		/* this transfer completed and data's already in the fifo
+		 * return error so pio gets used.
+		 */
+		if (tmp & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) {
+
+			/* deassert dreq */
+			net2272_write(ep->dev, DMAREQ,
+				(0 << DMA_BUFFER_VALID) |
+				(0 << DMA_REQUEST_ENABLE) |
+				(1 << DMA_CONTROL_DACK) |
+				(ep->dev->dma_eot_polarity << EOT_POLARITY) |
+				(ep->dev->dma_dack_polarity << DACK_POLARITY) |
+				(ep->dev->dma_dreq_polarity << DREQ_POLARITY) |
+				((ep->num >> 1) << DMA_ENDPOINT_SELECT));
+
+			return -EBUSY;
+		}
+	}
+
+	/* Don't use per-packet interrupts: use dma interrupts only */
+	net2272_ep_write(ep, EP_IRQENB, 0);
+
+	net2272_start_dma(ep->dev);
+
+	return 0;
+}
+
+static void net2272_cancel_dma(struct net2272 *dev)
+{
+#ifdef CONFIG_PCI
+	switch (dev->dev_id) {
+	case PCI_DEVICE_ID_RDK1:
+		writeb(0, dev->rdk1.plx9054_base_addr + DMACSR0);
+		writeb(1 << CHANNEL_ABORT, dev->rdk1.plx9054_base_addr + DMACSR0);
+		while (!(readb(dev->rdk1.plx9054_base_addr + DMACSR0) &
+		         (1 << CHANNEL_DONE)))
+			continue;	/* wait for dma to stabalize */
+
+		/* dma abort generates an interrupt */
+		writeb(1 << CHANNEL_CLEAR_INTERRUPT,
+			dev->rdk1.plx9054_base_addr + DMACSR0);
+		break;
+	}
+#endif
+
+	dev->dma_busy = 0;
+}
+
+/*---------------------------------------------------------------------------*/
+
+static int
+net2272_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct net2272_request *req;
+	struct net2272_ep *ep;
+	struct net2272 *dev;
+	unsigned long flags;
+	int status = -1;
+	u8 s;
+
+	req = container_of(_req, struct net2272_request, req);
+	if (!_req || !_req->complete || !_req->buf
+			|| !list_empty(&req->queue))
+		return -EINVAL;
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0))
+		return -EINVAL;
+	dev = ep->dev;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	/* set up dma mapping in case the caller didn't */
+	if (use_dma && ep->dma && _req->dma == DMA_ADDR_INVALID) {
+		_req->dma = dma_map_single(dev->dev, _req->buf, _req->length,
+			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		req->mapped = 1;
+	}
+
+	dev_vdbg(dev->dev, "%s queue req %p, len %d buf %p dma %08llx %s\n",
+		_ep->name, _req, _req->length, _req->buf,
+		(unsigned long long) _req->dma, _req->zero ? "zero" : "!zero");
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	/* kickstart this i/o queue? */
+	if (list_empty(&ep->queue) && !ep->stopped) {
+		/* maybe there's no control data, just status ack */
+		if (ep->num == 0 && _req->length == 0) {
+			net2272_done(ep, req, 0);
+			dev_vdbg(dev->dev, "%s status ack\n", ep->ep.name);
+			goto done;
+		}
+
+		/* Return zlp, don't let it block subsequent packets */
+		s = net2272_ep_read(ep, EP_STAT0);
+		if (s & (1 << BUFFER_EMPTY)) {
+			/* Buffer is empty check for a blocking zlp, handle it */
+			if ((s & (1 << NAK_OUT_PACKETS)) &&
+			    net2272_ep_read(ep, EP_STAT1) & (1 << LOCAL_OUT_ZLP)) {
+				dev_dbg(dev->dev, "WARNING: returning ZLP short packet termination!\n");
+				/*
+				 * Request is going to terminate with a short packet ...
+				 * hope the client is ready for it!
+				 */
+				status = net2272_read_fifo(ep, req);
+				/* clear short packet naking */
+				net2272_ep_write(ep, EP_STAT0, (1 << NAK_OUT_PACKETS));
+				goto done;
+			}
+		}
+
+		/* try dma first */
+		status = net2272_kick_dma(ep, req);
+
+		if (status < 0) {
+			/* dma failed (most likely in use by another endpoint)
+			 * fallback to pio
+			 */
+			status = 0;
+
+			if (ep->is_in)
+				status = net2272_write_fifo(ep, req);
+			else {
+				s = net2272_ep_read(ep, EP_STAT0);
+				if ((s & (1 << BUFFER_EMPTY)) == 0)
+					status = net2272_read_fifo(ep, req);
+			}
+
+			if (unlikely(status != 0)) {
+				if (status > 0)
+					status = 0;
+				req = NULL;
+			}
+		}
+	}
+	if (likely(req != 0))
+		list_add_tail(&req->queue, &ep->queue);
+
+	if (likely(!list_empty(&ep->queue)))
+		net2272_ep_write(ep, EP_RSPCLR, 1 << ALT_NAK_OUT_PACKETS);
+ done:
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+/* dequeue ALL requests */
+static void
+net2272_dequeue_all(struct net2272_ep *ep)
+{
+	struct net2272_request *req;
+
+	/* called with spinlock held */
+	ep->stopped = 1;
+
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next,
+				struct net2272_request,
+				queue);
+		net2272_done(ep, req, -ESHUTDOWN);
+	}
+}
+
+/* dequeue JUST ONE request */
+static int
+net2272_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct net2272_ep *ep;
+	struct net2272_request *req;
+	unsigned long flags;
+	int stopped;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0) || !_req)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	stopped = ep->stopped;
+	ep->stopped = 1;
+
+	/* make sure it's still queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req)
+			break;
+	}
+	if (&req->req != _req) {
+		spin_unlock_irqrestore(&ep->dev->lock, flags);
+		return -EINVAL;
+	}
+
+	/* queue head may be partially complete */
+	if (ep->queue.next == &req->queue) {
+		dev_dbg(ep->dev->dev, "unlink (%s) pio\n", _ep->name);
+		net2272_done(ep, req, -ECONNRESET);
+	}
+	req = NULL;
+	ep->stopped = stopped;
+
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return 0;
+}
+
+/*---------------------------------------------------------------------------*/
+
+static int
+net2272_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
+{
+	struct net2272_ep *ep;
+	unsigned long flags;
+	int ret = 0;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0))
+		return -EINVAL;
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+	if (ep->desc /* not ep0 */ && usb_endpoint_xfer_isoc(ep->desc))
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	if (!list_empty(&ep->queue))
+		ret = -EAGAIN;
+	else if (ep->is_in && value && net2272_fifo_status(_ep) != 0)
+		ret = -EAGAIN;
+	else {
+		dev_vdbg(ep->dev->dev, "%s %s %s\n", _ep->name,
+			value ? "set" : "clear",
+			wedged ? "wedge" : "halt");
+		/* set/clear */
+		if (value) {
+			if (ep->num == 0)
+				ep->dev->protocol_stall = 1;
+			else
+				set_halt(ep);
+			if (wedged)
+				ep->wedged = 1;
+		} else {
+			clear_halt(ep);
+			ep->wedged = 0;
+		}
+	}
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+
+	return ret;
+}
+
+static int
+net2272_set_halt(struct usb_ep *_ep, int value)
+{
+	return net2272_set_halt_and_wedge(_ep, value, 0);
+}
+
+static int
+net2272_set_wedge(struct usb_ep *_ep)
+{
+	if (!_ep || _ep->name == ep0name)
+		return -EINVAL;
+	return net2272_set_halt_and_wedge(_ep, 1, 1);
+}
+
+static int
+net2272_fifo_status(struct usb_ep *_ep)
+{
+	struct net2272_ep *ep;
+	u16 avail;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0))
+		return -ENODEV;
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	avail = net2272_ep_read(ep, EP_AVAIL1) << 8;
+	avail |= net2272_ep_read(ep, EP_AVAIL0);
+	if (avail > ep->fifo_size)
+		return -EOVERFLOW;
+	if (ep->is_in)
+		avail = ep->fifo_size - avail;
+	return avail;
+}
+
+static void
+net2272_fifo_flush(struct usb_ep *_ep)
+{
+	struct net2272_ep *ep;
+
+	ep = container_of(_ep, struct net2272_ep, ep);
+	if (!_ep || (!ep->desc && ep->num != 0))
+		return;
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+		return;
+
+	net2272_ep_write(ep, EP_STAT1, 1 << BUFFER_FLUSH);
+}
+
+static struct usb_ep_ops net2272_ep_ops = {
+	.enable        = net2272_enable,
+	.disable       = net2272_disable,
+
+	.alloc_request = net2272_alloc_request,
+	.free_request  = net2272_free_request,
+
+	.queue         = net2272_queue,
+	.dequeue       = net2272_dequeue,
+
+	.set_halt      = net2272_set_halt,
+	.set_wedge     = net2272_set_wedge,
+	.fifo_status   = net2272_fifo_status,
+	.fifo_flush    = net2272_fifo_flush,
+};
+
+/*---------------------------------------------------------------------------*/
+
+static int
+net2272_get_frame(struct usb_gadget *_gadget)
+{
+	struct net2272 *dev;
+	unsigned long flags;
+	u16 ret;
+
+	if (!_gadget)
+		return -ENODEV;
+	dev = container_of(_gadget, struct net2272, gadget);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	ret = net2272_read(dev, FRAME1) << 8;
+	ret |= net2272_read(dev, FRAME0);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret;
+}
+
+static int
+net2272_wakeup(struct usb_gadget *_gadget)
+{
+	struct net2272 *dev;
+	u8 tmp;
+	unsigned long flags;
+
+	if (!_gadget)
+		return 0;
+	dev = container_of(_gadget, struct net2272, gadget);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	tmp = net2272_read(dev, USBCTL0);
+	if (tmp & (1 << IO_WAKEUP_ENABLE))
+		net2272_write(dev, USBCTL1, (1 << GENERATE_RESUME));
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+static int
+net2272_set_selfpowered(struct usb_gadget *_gadget, int value)
+{
+	struct net2272 *dev;
+
+	if (!_gadget)
+		return -ENODEV;
+	dev = container_of(_gadget, struct net2272, gadget);
+
+	dev->is_selfpowered = value;
+
+	return 0;
+}
+
+static int
+net2272_pullup(struct usb_gadget *_gadget, int is_on)
+{
+	struct net2272 *dev;
+	u8 tmp;
+	unsigned long flags;
+
+	if (!_gadget)
+		return -ENODEV;
+	dev = container_of(_gadget, struct net2272, gadget);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	tmp = net2272_read(dev, USBCTL0);
+	dev->softconnect = (is_on != 0);
+	if (is_on)
+		tmp |= (1 << USB_DETECT_ENABLE);
+	else
+		tmp &= ~(1 << USB_DETECT_ENABLE);
+	net2272_write(dev, USBCTL0, tmp);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return 0;
+}
+
+static int net2272_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int net2272_stop(struct usb_gadget_driver *driver);
+
+static const struct usb_gadget_ops net2272_ops = {
+	.get_frame       = net2272_get_frame,
+	.wakeup          = net2272_wakeup,
+	.set_selfpowered = net2272_set_selfpowered,
+	.pullup			= net2272_pullup,
+	.start			= net2272_start,
+	.stop			= net2272_stop,
+};
+
+/*---------------------------------------------------------------------------*/
+
+static ssize_t
+net2272_show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
+{
+	struct net2272 *dev;
+	char *next;
+	unsigned size, t;
+	unsigned long flags;
+	u8 t1, t2;
+	int i;
+	const char *s;
+
+	dev = dev_get_drvdata(_dev);
+	next = buf;
+	size = PAGE_SIZE;
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (dev->driver)
+		s = dev->driver->driver.name;
+	else
+		s = "(none)";
+
+	/* Main Control Registers */
+	t = scnprintf(next, size, "%s version %s,"
+		"chiprev %02x, locctl %02x\n"
+		"irqenb0 %02x irqenb1 %02x "
+		"irqstat0 %02x irqstat1 %02x\n",
+		driver_name, driver_vers, dev->chiprev,
+		net2272_read(dev, LOCCTL),
+		net2272_read(dev, IRQENB0),
+		net2272_read(dev, IRQENB1),
+		net2272_read(dev, IRQSTAT0),
+		net2272_read(dev, IRQSTAT1));
+	size -= t;
+	next += t;
+
+	/* DMA */
+	t1 = net2272_read(dev, DMAREQ);
+	t = scnprintf(next, size, "\ndmareq %02x: %s %s%s%s%s\n",
+		t1, ep_name[(t1 & 0x01) + 1],
+		t1 & (1 << DMA_CONTROL_DACK) ? "dack " : "",
+		t1 & (1 << DMA_REQUEST_ENABLE) ? "reqenb " : "",
+		t1 & (1 << DMA_REQUEST) ? "req " : "",
+		t1 & (1 << DMA_BUFFER_VALID) ? "valid " : "");
+	size -= t;
+	next += t;
+
+	/* USB Control Registers */
+	t1 = net2272_read(dev, USBCTL1);
+	if (t1 & (1 << VBUS_PIN)) {
+		if (t1 & (1 << USB_HIGH_SPEED))
+			s = "high speed";
+		else if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+			s = "powered";
+		else
+			s = "full speed";
+	} else
+		s = "not attached";
+	t = scnprintf(next, size,
+		"usbctl0 %02x usbctl1 %02x addr 0x%02x (%s)\n",
+		net2272_read(dev, USBCTL0), t1,
+		net2272_read(dev, OURADDR), s);
+	size -= t;
+	next += t;
+
+	/* Endpoint Registers */
+	for (i = 0; i < 4; ++i) {
+		struct net2272_ep *ep;
+
+		ep = &dev->ep[i];
+		if (i && !ep->desc)
+			continue;
+
+		t1 = net2272_ep_read(ep, EP_CFG);
+		t2 = net2272_ep_read(ep, EP_RSPSET);
+		t = scnprintf(next, size,
+			"\n%s\tcfg %02x rsp (%02x) %s%s%s%s%s%s%s%s"
+			"irqenb %02x\n",
+			ep->ep.name, t1, t2,
+			(t2 & (1 << ALT_NAK_OUT_PACKETS)) ? "NAK " : "",
+			(t2 & (1 << HIDE_STATUS_PHASE)) ? "hide " : "",
+			(t2 & (1 << AUTOVALIDATE)) ? "auto " : "",
+			(t2 & (1 << INTERRUPT_MODE)) ? "interrupt " : "",
+			(t2 & (1 << CONTROL_STATUS_PHASE_HANDSHAKE)) ? "status " : "",
+			(t2 & (1 << NAK_OUT_PACKETS_MODE)) ? "NAKmode " : "",
+			(t2 & (1 << ENDPOINT_TOGGLE)) ? "DATA1 " : "DATA0 ",
+			(t2 & (1 << ENDPOINT_HALT)) ? "HALT " : "",
+			net2272_ep_read(ep, EP_IRQENB));
+		size -= t;
+		next += t;
+
+		t = scnprintf(next, size,
+			"\tstat0 %02x stat1 %02x avail %04x "
+			"(ep%d%s-%s)%s\n",
+			net2272_ep_read(ep, EP_STAT0),
+			net2272_ep_read(ep, EP_STAT1),
+			(net2272_ep_read(ep, EP_AVAIL1) << 8) | net2272_ep_read(ep, EP_AVAIL0),
+			t1 & 0x0f,
+			ep->is_in ? "in" : "out",
+			type_string(t1 >> 5),
+			ep->stopped ? "*" : "");
+		size -= t;
+		next += t;
+
+		t = scnprintf(next, size,
+			"\tep_transfer %06x\n",
+			((net2272_ep_read(ep, EP_TRANSFER2) & 0xff) << 16) |
+			((net2272_ep_read(ep, EP_TRANSFER1) & 0xff) << 8) |
+			((net2272_ep_read(ep, EP_TRANSFER0) & 0xff)));
+		size -= t;
+		next += t;
+
+		t1 = net2272_ep_read(ep, EP_BUFF_STATES) & 0x03;
+		t2 = (net2272_ep_read(ep, EP_BUFF_STATES) >> 2) & 0x03;
+		t = scnprintf(next, size,
+			"\tbuf-a %s buf-b %s\n",
+			buf_state_string(t1),
+			buf_state_string(t2));
+		size -= t;
+		next += t;
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return PAGE_SIZE - size;
+}
+static DEVICE_ATTR(registers, S_IRUGO, net2272_show_registers, NULL);
+
+/*---------------------------------------------------------------------------*/
+
+static void
+net2272_set_fifo_mode(struct net2272 *dev, int mode)
+{
+	u8 tmp;
+
+	tmp = net2272_read(dev, LOCCTL) & 0x3f;
+	tmp |= (mode << 6);
+	net2272_write(dev, LOCCTL, tmp);
+
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+
+	/* always ep-a, ep-c ... maybe not ep-b */
+	list_add_tail(&dev->ep[1].ep.ep_list, &dev->gadget.ep_list);
+
+	switch (mode) {
+	case 0:
+		list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list);
+		dev->ep[1].fifo_size = dev->ep[2].fifo_size = 512;
+		break;
+	case 1:
+		list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list);
+		dev->ep[1].fifo_size = 1024;
+		dev->ep[2].fifo_size = 512;
+		break;
+	case 2:
+		list_add_tail(&dev->ep[2].ep.ep_list, &dev->gadget.ep_list);
+		dev->ep[1].fifo_size = dev->ep[2].fifo_size = 1024;
+		break;
+	case 3:
+		dev->ep[1].fifo_size = 1024;
+		break;
+	}
+
+	/* ep-c is always 2 512 byte buffers */
+	list_add_tail(&dev->ep[3].ep.ep_list, &dev->gadget.ep_list);
+	dev->ep[3].fifo_size = 512;
+}
+
+/*---------------------------------------------------------------------------*/
+
+static struct net2272 *the_controller;
+
+static void
+net2272_usb_reset(struct net2272 *dev)
+{
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+	net2272_cancel_dma(dev);
+
+	net2272_write(dev, IRQENB0, 0);
+	net2272_write(dev, IRQENB1, 0);
+
+	/* clear irq state */
+	net2272_write(dev, IRQSTAT0, 0xff);
+	net2272_write(dev, IRQSTAT1, ~(1 << SUSPEND_REQUEST_INTERRUPT));
+
+	net2272_write(dev, DMAREQ,
+		(0 << DMA_BUFFER_VALID) |
+		(0 << DMA_REQUEST_ENABLE) |
+		(1 << DMA_CONTROL_DACK) |
+		(dev->dma_eot_polarity << EOT_POLARITY) |
+		(dev->dma_dack_polarity << DACK_POLARITY) |
+		(dev->dma_dreq_polarity << DREQ_POLARITY) |
+		((dma_ep >> 1) << DMA_ENDPOINT_SELECT));
+
+	net2272_cancel_dma(dev);
+	net2272_set_fifo_mode(dev, (fifo_mode <= 3) ? fifo_mode : 0);
+
+	/* Set the NET2272 ep fifo data width to 16-bit mode and for correct byte swapping
+	 * note that the higher level gadget drivers are expected to convert data to little endian.
+	 * Enable byte swap for your local bus/cpu if needed by setting BYTE_SWAP in LOCCTL here
+	 */
+	net2272_write(dev, LOCCTL, net2272_read(dev, LOCCTL) | (1 << DATA_WIDTH));
+	net2272_write(dev, LOCCTL1, (dma_mode << DMA_MODE));
+}
+
+static void
+net2272_usb_reinit(struct net2272 *dev)
+{
+	int i;
+
+	/* basic endpoint init */
+	for (i = 0; i < 4; ++i) {
+		struct net2272_ep *ep = &dev->ep[i];
+
+		ep->ep.name = ep_name[i];
+		ep->dev = dev;
+		ep->num = i;
+		ep->not_empty = 0;
+
+		if (use_dma && ep->num == dma_ep)
+			ep->dma = 1;
+
+		if (i > 0 && i <= 3)
+			ep->fifo_size = 512;
+		else
+			ep->fifo_size = 64;
+		net2272_ep_reset(ep);
+	}
+	dev->ep[0].ep.maxpacket = 64;
+
+	dev->gadget.ep0 = &dev->ep[0].ep;
+	dev->ep[0].stopped = 0;
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+}
+
+static void
+net2272_ep0_start(struct net2272 *dev)
+{
+	struct net2272_ep *ep0 = &dev->ep[0];
+
+	net2272_ep_write(ep0, EP_RSPSET,
+		(1 << NAK_OUT_PACKETS_MODE) |
+		(1 << ALT_NAK_OUT_PACKETS));
+	net2272_ep_write(ep0, EP_RSPCLR,
+		(1 << HIDE_STATUS_PHASE) |
+		(1 << CONTROL_STATUS_PHASE_HANDSHAKE));
+	net2272_write(dev, USBCTL0,
+		(dev->softconnect << USB_DETECT_ENABLE) |
+		(1 << USB_ROOT_PORT_WAKEUP_ENABLE) |
+		(1 << IO_WAKEUP_ENABLE));
+	net2272_write(dev, IRQENB0,
+		(1 << SETUP_PACKET_INTERRUPT_ENABLE) |
+		(1 << ENDPOINT_0_INTERRUPT_ENABLE) |
+		(1 << DMA_DONE_INTERRUPT_ENABLE));
+	net2272_write(dev, IRQENB1,
+		(1 << VBUS_INTERRUPT_ENABLE) |
+		(1 << ROOT_PORT_RESET_INTERRUPT_ENABLE) |
+		(1 << SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE));
+}
+
+/* when a driver is successfully registered, it will receive
+ * control requests including set_configuration(), which enables
+ * non-control requests.  then usb traffic follows until a
+ * disconnect is reported.  then a host may connect again, or
+ * the driver might get unbound.
+ */
+static int net2272_start(struct usb_gadget_driver *driver,
+	int (*bind)(struct usb_gadget *))
+{
+	struct net2272 *dev = the_controller;
+	int ret;
+	unsigned i;
+
+	if (!driver || !bind || !driver->unbind || !driver->setup ||
+	    driver->speed != USB_SPEED_HIGH)
+		return -EINVAL;
+	if (!dev)
+		return -ENODEV;
+	if (dev->driver)
+		return -EBUSY;
+
+	for (i = 0; i < 4; ++i)
+		dev->ep[i].irqs = 0;
+	/* hook up the driver ... */
+	dev->softconnect = 1;
+	driver->driver.bus = NULL;
+	dev->driver = driver;
+	dev->gadget.dev.driver = &driver->driver;
+	ret = bind(&dev->gadget);
+	if (ret) {
+		dev_dbg(dev->dev, "bind to driver %s --> %d\n",
+			driver->driver.name, ret);
+		dev->driver = NULL;
+		dev->gadget.dev.driver = NULL;
+		return ret;
+	}
+
+	/* ... then enable host detection and ep0; and we're ready
+	 * for set_configuration as well as eventual disconnect.
+	 */
+	net2272_ep0_start(dev);
+
+	dev_dbg(dev->dev, "%s ready\n", driver->driver.name);
+
+	return 0;
+}
+
+static void
+stop_activity(struct net2272 *dev, struct usb_gadget_driver *driver)
+{
+	int i;
+
+	/* don't disconnect if it's not connected */
+	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+		driver = NULL;
+
+	/* stop hardware; prevent new request submissions;
+	 * and kill any outstanding requests.
+	 */
+	net2272_usb_reset(dev);
+	for (i = 0; i < 4; ++i)
+		net2272_dequeue_all(&dev->ep[i]);
+
+	/* report disconnect; the driver is already quiesced */
+	if (driver) {
+		spin_unlock(&dev->lock);
+		driver->disconnect(&dev->gadget);
+		spin_lock(&dev->lock);
+
+	}
+	net2272_usb_reinit(dev);
+}
+
+static int net2272_stop(struct usb_gadget_driver *driver)
+{
+	struct net2272 *dev = the_controller;
+	unsigned long flags;
+
+	if (!dev)
+		return -ENODEV;
+	if (!driver || driver != dev->driver)
+		return -EINVAL;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	stop_activity(dev, driver);
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	net2272_pullup(&dev->gadget, 0);
+
+	driver->unbind(&dev->gadget);
+	dev->gadget.dev.driver = NULL;
+	dev->driver = NULL;
+
+	dev_dbg(dev->dev, "unregistered driver '%s'\n", driver->driver.name);
+	return 0;
+}
+
+/*---------------------------------------------------------------------------*/
+/* handle ep-a/ep-b dma completions */
+static void
+net2272_handle_dma(struct net2272_ep *ep)
+{
+	struct net2272_request *req;
+	unsigned len;
+	int status;
+
+	if (!list_empty(&ep->queue))
+		req = list_entry(ep->queue.next,
+				struct net2272_request, queue);
+	else
+		req = NULL;
+
+	dev_vdbg(ep->dev->dev, "handle_dma %s req %p\n", ep->ep.name, req);
+
+	/* Ensure DREQ is de-asserted */
+	net2272_write(ep->dev, DMAREQ,
+		(0 << DMA_BUFFER_VALID)
+	      | (0 << DMA_REQUEST_ENABLE)
+	      | (1 << DMA_CONTROL_DACK)
+	      | (ep->dev->dma_eot_polarity << EOT_POLARITY)
+	      | (ep->dev->dma_dack_polarity << DACK_POLARITY)
+	      | (ep->dev->dma_dreq_polarity << DREQ_POLARITY)
+	      | ((ep->dma >> 1) << DMA_ENDPOINT_SELECT));
+
+	ep->dev->dma_busy = 0;
+
+	net2272_ep_write(ep, EP_IRQENB,
+		  (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
+		| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
+		| net2272_ep_read(ep, EP_IRQENB));
+
+	/* device-to-host transfer completed */
+	if (ep->is_in) {
+		/* validate a short packet or zlp if necessary */
+		if ((req->req.length % ep->ep.maxpacket != 0) ||
+				req->req.zero)
+			set_fifo_bytecount(ep, 0);
+
+		net2272_done(ep, req, 0);
+		if (!list_empty(&ep->queue)) {
+			req = list_entry(ep->queue.next,
+					struct net2272_request, queue);
+			status = net2272_kick_dma(ep, req);
+			if (status < 0)
+				net2272_pio_advance(ep);
+		}
+
+	/* host-to-device transfer completed */
+	} else {
+		/* terminated with a short packet? */
+		if (net2272_read(ep->dev, IRQSTAT0) &
+				(1 << DMA_DONE_INTERRUPT)) {
+			/* abort system dma */
+			net2272_cancel_dma(ep->dev);
+		}
+
+		/* EP_TRANSFER will contain the number of bytes
+		 * actually received.
+		 * NOTE: There is no overflow detection on EP_TRANSFER:
+		 * We can't deal with transfers larger than 2^24 bytes!
+		 */
+		len = (net2272_ep_read(ep, EP_TRANSFER2) << 16)
+			| (net2272_ep_read(ep, EP_TRANSFER1) << 8)
+			| (net2272_ep_read(ep, EP_TRANSFER0));
+
+		if (ep->not_empty)
+			len += 4;
+
+		req->req.actual += len;
+
+		/* get any remaining data */
+		net2272_pio_advance(ep);
+	}
+}
+
+/*---------------------------------------------------------------------------*/
+
+static void
+net2272_handle_ep(struct net2272_ep *ep)
+{
+	struct net2272_request *req;
+	u8 stat0, stat1;
+
+	if (!list_empty(&ep->queue))
+		req = list_entry(ep->queue.next,
+			struct net2272_request, queue);
+	else
+		req = NULL;
+
+	/* ack all, and handle what we care about */
+	stat0 = net2272_ep_read(ep, EP_STAT0);
+	stat1 = net2272_ep_read(ep, EP_STAT1);
+	ep->irqs++;
+
+	dev_vdbg(ep->dev->dev, "%s ack ep_stat0 %02x, ep_stat1 %02x, req %p\n",
+		ep->ep.name, stat0, stat1, req ? &req->req : 0);
+
+	net2272_ep_write(ep, EP_STAT0, stat0 &
+		~((1 << NAK_OUT_PACKETS)
+		| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)));
+	net2272_ep_write(ep, EP_STAT1, stat1);
+
+	/* data packet(s) received (in the fifo, OUT)
+	 * direction must be validated, otherwise control read status phase
+	 * could be interpreted as a valid packet
+	 */
+	if (!ep->is_in && (stat0 & (1 << DATA_PACKET_RECEIVED_INTERRUPT)))
+		net2272_pio_advance(ep);
+	/* data packet(s) transmitted (IN) */
+	else if (stat0 & (1 << DATA_PACKET_TRANSMITTED_INTERRUPT))
+		net2272_pio_advance(ep);
+}
+
+static struct net2272_ep *
+net2272_get_ep_by_addr(struct net2272 *dev, u16 wIndex)
+{
+	struct net2272_ep *ep;
+
+	if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
+		return &dev->ep[0];
+
+	list_for_each_entry(ep, &dev->gadget.ep_list, ep.ep_list) {
+		u8 bEndpointAddress;
+
+		if (!ep->desc)
+			continue;
+		bEndpointAddress = ep->desc->bEndpointAddress;
+		if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
+			continue;
+		if ((wIndex & 0x0f) == (bEndpointAddress & 0x0f))
+			return ep;
+	}
+	return NULL;
+}
+
+/*
+ * USB Test Packet:
+ * JKJKJKJK * 9
+ * JJKKJJKK * 8
+ * JJJJKKKK * 8
+ * JJJJJJJKKKKKKK * 8
+ * JJJJJJJK * 8
+ * {JKKKKKKK * 10}, JK
+ */
+static const u8 net2272_test_packet[] = {
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
+	0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+	0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+	0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
+	0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFD, 0x7E
+};
+
+static void
+net2272_set_test_mode(struct net2272 *dev, int mode)
+{
+	int i;
+
+	/* Disable all net2272 interrupts:
+	 * Nothing but a power cycle should stop the test.
+	 */
+	net2272_write(dev, IRQENB0, 0x00);
+	net2272_write(dev, IRQENB1, 0x00);
+
+	/* Force tranceiver to high-speed */
+	net2272_write(dev, XCVRDIAG, 1 << FORCE_HIGH_SPEED);
+
+	net2272_write(dev, PAGESEL, 0);
+	net2272_write(dev, EP_STAT0, 1 << DATA_PACKET_TRANSMITTED_INTERRUPT);
+	net2272_write(dev, EP_RSPCLR,
+			  (1 << CONTROL_STATUS_PHASE_HANDSHAKE)
+			| (1 << HIDE_STATUS_PHASE));
+	net2272_write(dev, EP_CFG, 1 << ENDPOINT_DIRECTION);
+	net2272_write(dev, EP_STAT1, 1 << BUFFER_FLUSH);
+
+	/* wait for status phase to complete */
+	while (!(net2272_read(dev, EP_STAT0) &
+				(1 << DATA_PACKET_TRANSMITTED_INTERRUPT)))
+		;
+
+	/* Enable test mode */
+	net2272_write(dev, USBTEST, mode);
+
+	/* load test packet */
+	if (mode == TEST_PACKET) {
+		/* switch to 8 bit mode */
+		net2272_write(dev, LOCCTL, net2272_read(dev, LOCCTL) &
+				~(1 << DATA_WIDTH));
+
+		for (i = 0; i < sizeof(net2272_test_packet); ++i)
+			net2272_write(dev, EP_DATA, net2272_test_packet[i]);
+
+		/* Validate test packet */
+		net2272_write(dev, EP_TRANSFER0, 0);
+	}
+}
+
+static void
+net2272_handle_stat0_irqs(struct net2272 *dev, u8 stat)
+{
+	struct net2272_ep *ep;
+	u8 num, scratch;
+
+	/* starting a control request? */
+	if (unlikely(stat & (1 << SETUP_PACKET_INTERRUPT))) {
+		union {
+			u8 raw[8];
+			struct usb_ctrlrequest	r;
+		} u;
+		int tmp = 0;
+		struct net2272_request *req;
+
+		if (dev->gadget.speed == USB_SPEED_UNKNOWN) {
+			if (net2272_read(dev, USBCTL1) & (1 << USB_HIGH_SPEED))
+				dev->gadget.speed = USB_SPEED_HIGH;
+			else
+				dev->gadget.speed = USB_SPEED_FULL;
+			dev_dbg(dev->dev, "%s speed\n",
+				(dev->gadget.speed == USB_SPEED_HIGH) ? "high" : "full");
+		}
+
+		ep = &dev->ep[0];
+		ep->irqs++;
+
+		/* make sure any leftover interrupt state is cleared */
+		stat &= ~(1 << ENDPOINT_0_INTERRUPT);
+		while (!list_empty(&ep->queue)) {
+			req = list_entry(ep->queue.next,
+				struct net2272_request, queue);
+			net2272_done(ep, req,
+				(req->req.actual == req->req.length) ? 0 : -EPROTO);
+		}
+		ep->stopped = 0;
+		dev->protocol_stall = 0;
+		net2272_ep_write(ep, EP_STAT0,
+			    (1 << DATA_IN_TOKEN_INTERRUPT)
+			  | (1 << DATA_OUT_TOKEN_INTERRUPT)
+			  | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)
+			  | (1 << DATA_PACKET_RECEIVED_INTERRUPT)
+			  | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT));
+		net2272_ep_write(ep, EP_STAT1,
+			    (1 << TIMEOUT)
+			  | (1 << USB_OUT_ACK_SENT)
+			  | (1 << USB_OUT_NAK_SENT)
+			  | (1 << USB_IN_ACK_RCVD)
+			  | (1 << USB_IN_NAK_SENT)
+			  | (1 << USB_STALL_SENT)
+			  | (1 << LOCAL_OUT_ZLP));
+
+		/*
+		 * Ensure Control Read pre-validation setting is beyond maximum size
+		 *  - Control Writes can leave non-zero values in EP_TRANSFER. If
+		 *    an EP0 transfer following the Control Write is a Control Read,
+		 *    the NET2272 sees the non-zero EP_TRANSFER as an unexpected
+		 *    pre-validation count.
+		 *  - Setting EP_TRANSFER beyond the maximum EP0 transfer size ensures
+		 *    the pre-validation count cannot cause an unexpected validatation
+		 */
+		net2272_write(dev, PAGESEL, 0);
+		net2272_write(dev, EP_TRANSFER2, 0xff);
+		net2272_write(dev, EP_TRANSFER1, 0xff);
+		net2272_write(dev, EP_TRANSFER0, 0xff);
+
+		u.raw[0] = net2272_read(dev, SETUP0);
+		u.raw[1] = net2272_read(dev, SETUP1);
+		u.raw[2] = net2272_read(dev, SETUP2);
+		u.raw[3] = net2272_read(dev, SETUP3);
+		u.raw[4] = net2272_read(dev, SETUP4);
+		u.raw[5] = net2272_read(dev, SETUP5);
+		u.raw[6] = net2272_read(dev, SETUP6);
+		u.raw[7] = net2272_read(dev, SETUP7);
+		/*
+		 * If you have a big endian cpu make sure le16_to_cpus
+		 * performs the proper byte swapping here...
+		 */
+		le16_to_cpus(&u.r.wValue);
+		le16_to_cpus(&u.r.wIndex);
+		le16_to_cpus(&u.r.wLength);
+
+		/* ack the irq */
+		net2272_write(dev, IRQSTAT0, 1 << SETUP_PACKET_INTERRUPT);
+		stat ^= (1 << SETUP_PACKET_INTERRUPT);
+
+		/* watch control traffic at the token level, and force
+		 * synchronization before letting the status phase happen.
+		 */
+		ep->is_in = (u.r.bRequestType & USB_DIR_IN) != 0;
+		if (ep->is_in) {
+			scratch = (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
+				| (1 << DATA_OUT_TOKEN_INTERRUPT_ENABLE)
+				| (1 << DATA_IN_TOKEN_INTERRUPT_ENABLE);
+			stop_out_naking(ep);
+		} else
+			scratch = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
+				| (1 << DATA_OUT_TOKEN_INTERRUPT_ENABLE)
+				| (1 << DATA_IN_TOKEN_INTERRUPT_ENABLE);
+		net2272_ep_write(ep, EP_IRQENB, scratch);
+
+		if ((u.r.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD)
+			goto delegate;
+		switch (u.r.bRequest) {
+		case USB_REQ_GET_STATUS: {
+			struct net2272_ep *e;
+			u16 status = 0;
+
+			switch (u.r.bRequestType & USB_RECIP_MASK) {
+			case USB_RECIP_ENDPOINT:
+				e = net2272_get_ep_by_addr(dev, u.r.wIndex);
+				if (!e || u.r.wLength > 2)
+					goto do_stall;
+				if (net2272_ep_read(e, EP_RSPSET) & (1 << ENDPOINT_HALT))
+					status = __constant_cpu_to_le16(1);
+				else
+					status = __constant_cpu_to_le16(0);
+
+				/* don't bother with a request object! */
+				net2272_ep_write(&dev->ep[0], EP_IRQENB, 0);
+				writew(status, net2272_reg_addr(dev, EP_DATA));
+				set_fifo_bytecount(&dev->ep[0], 0);
+				allow_status(ep);
+				dev_vdbg(dev->dev, "%s stat %02x\n",
+					ep->ep.name, status);
+				goto next_endpoints;
+			case USB_RECIP_DEVICE:
+				if (u.r.wLength > 2)
+					goto do_stall;
+				if (dev->is_selfpowered)
+					status = (1 << USB_DEVICE_SELF_POWERED);
+
+				/* don't bother with a request object! */
+				net2272_ep_write(&dev->ep[0], EP_IRQENB, 0);
+				writew(status, net2272_reg_addr(dev, EP_DATA));
+				set_fifo_bytecount(&dev->ep[0], 0);
+				allow_status(ep);
+				dev_vdbg(dev->dev, "device stat %02x\n", status);
+				goto next_endpoints;
+			case USB_RECIP_INTERFACE:
+				if (u.r.wLength > 2)
+					goto do_stall;
+
+				/* don't bother with a request object! */
+				net2272_ep_write(&dev->ep[0], EP_IRQENB, 0);
+				writew(status, net2272_reg_addr(dev, EP_DATA));
+				set_fifo_bytecount(&dev->ep[0], 0);
+				allow_status(ep);
+				dev_vdbg(dev->dev, "interface status %02x\n", status);
+				goto next_endpoints;
+			}
+
+			break;
+		}
+		case USB_REQ_CLEAR_FEATURE: {
+			struct net2272_ep *e;
+
+			if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+				goto delegate;
+			if (u.r.wValue != USB_ENDPOINT_HALT ||
+			    u.r.wLength != 0)
+				goto do_stall;
+			e = net2272_get_ep_by_addr(dev, u.r.wIndex);
+			if (!e)
+				goto do_stall;
+			if (e->wedged) {
+				dev_vdbg(dev->dev, "%s wedged, halt not cleared\n",
+					ep->ep.name);
+			} else {
+				dev_vdbg(dev->dev, "%s clear halt\n", ep->ep.name);
+				clear_halt(e);
+			}
+			allow_status(ep);
+			goto next_endpoints;
+		}
+		case USB_REQ_SET_FEATURE: {
+			struct net2272_ep *e;
+
+			if (u.r.bRequestType == USB_RECIP_DEVICE) {
+				if (u.r.wIndex != NORMAL_OPERATION)
+					net2272_set_test_mode(dev, (u.r.wIndex >> 8));
+				allow_status(ep);
+				dev_vdbg(dev->dev, "test mode: %d\n", u.r.wIndex);
+				goto next_endpoints;
+			} else if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+				goto delegate;
+			if (u.r.wValue != USB_ENDPOINT_HALT ||
+			    u.r.wLength != 0)
+				goto do_stall;
+			e = net2272_get_ep_by_addr(dev, u.r.wIndex);
+			if (!e)
+				goto do_stall;
+			set_halt(e);
+			allow_status(ep);
+			dev_vdbg(dev->dev, "%s set halt\n", ep->ep.name);
+			goto next_endpoints;
+		}
+		case USB_REQ_SET_ADDRESS: {
+			net2272_write(dev, OURADDR, u.r.wValue & 0xff);
+			allow_status(ep);
+			break;
+		}
+		default:
+ delegate:
+			dev_vdbg(dev->dev, "setup %02x.%02x v%04x i%04x "
+				"ep_cfg %08x\n",
+				u.r.bRequestType, u.r.bRequest,
+				u.r.wValue, u.r.wIndex,
+				net2272_ep_read(ep, EP_CFG));
+			spin_unlock(&dev->lock);
+			tmp = dev->driver->setup(&dev->gadget, &u.r);
+			spin_lock(&dev->lock);
+		}
+
+		/* stall ep0 on error */
+		if (tmp < 0) {
+ do_stall:
+			dev_vdbg(dev->dev, "req %02x.%02x protocol STALL; stat %d\n",
+				u.r.bRequestType, u.r.bRequest, tmp);
+			dev->protocol_stall = 1;
+		}
+	/* endpoint dma irq? */
+	} else if (stat & (1 << DMA_DONE_INTERRUPT)) {
+		net2272_cancel_dma(dev);
+		net2272_write(dev, IRQSTAT0, 1 << DMA_DONE_INTERRUPT);
+		stat &= ~(1 << DMA_DONE_INTERRUPT);
+		num = (net2272_read(dev, DMAREQ) & (1 << DMA_ENDPOINT_SELECT))
+			? 2 : 1;
+
+		ep = &dev->ep[num];
+		net2272_handle_dma(ep);
+	}
+
+ next_endpoints:
+	/* endpoint data irq? */
+	scratch = stat & 0x0f;
+	stat &= ~0x0f;
+	for (num = 0; scratch; num++) {
+		u8 t;
+
+		/* does this endpoint's FIFO and queue need tending? */
+		t = 1 << num;
+		if ((scratch & t) == 0)
+			continue;
+		scratch ^= t;
+
+		ep = &dev->ep[num];
+		net2272_handle_ep(ep);
+	}
+
+	/* some interrupts we can just ignore */
+	stat &= ~(1 << SOF_INTERRUPT);
+
+	if (stat)
+		dev_dbg(dev->dev, "unhandled irqstat0 %02x\n", stat);
+}
+
+static void
+net2272_handle_stat1_irqs(struct net2272 *dev, u8 stat)
+{
+	u8 tmp, mask;
+
+	/* after disconnect there's nothing else to do! */
+	tmp = (1 << VBUS_INTERRUPT) | (1 << ROOT_PORT_RESET_INTERRUPT);
+	mask = (1 << USB_HIGH_SPEED) | (1 << USB_FULL_SPEED);
+
+	if (stat & tmp) {
+		net2272_write(dev, IRQSTAT1, tmp);
+		if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) &&
+				((net2272_read(dev, USBCTL1) & mask) == 0))
+			|| ((net2272_read(dev, USBCTL1) & (1 << VBUS_PIN))
+				== 0))
+				&& (dev->gadget.speed != USB_SPEED_UNKNOWN)) {
+			dev_dbg(dev->dev, "disconnect %s\n",
+				dev->driver->driver.name);
+			stop_activity(dev, dev->driver);
+			net2272_ep0_start(dev);
+			return;
+		}
+		stat &= ~tmp;
+
+		if (!stat)
+			return;
+	}
+
+	tmp = (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT);
+	if (stat & tmp) {
+		net2272_write(dev, IRQSTAT1, tmp);
+		if (stat & (1 << SUSPEND_REQUEST_INTERRUPT)) {
+			if (dev->driver->suspend)
+				dev->driver->suspend(&dev->gadget);
+			if (!enable_suspend) {
+				stat &= ~(1 << SUSPEND_REQUEST_INTERRUPT);
+				dev_dbg(dev->dev, "Suspend disabled, ignoring\n");
+			}
+		} else {
+			if (dev->driver->resume)
+				dev->driver->resume(&dev->gadget);
+		}
+		stat &= ~tmp;
+	}
+
+	/* clear any other status/irqs */
+	if (stat)
+		net2272_write(dev, IRQSTAT1, stat);
+
+	/* some status we can just ignore */
+	stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+			| (1 << SUSPEND_REQUEST_INTERRUPT)
+			| (1 << RESUME_INTERRUPT));
+	if (!stat)
+		return;
+	else
+		dev_dbg(dev->dev, "unhandled irqstat1 %02x\n", stat);
+}
+
+static irqreturn_t net2272_irq(int irq, void *_dev)
+{
+	struct net2272 *dev = _dev;
+#if defined(PLX_PCI_RDK) || defined(PLX_PCI_RDK2)
+	u32 intcsr;
+#endif
+#if defined(PLX_PCI_RDK)
+	u8 dmareq;
+#endif
+	spin_lock(&dev->lock);
+#if defined(PLX_PCI_RDK)
+	intcsr = readl(dev->rdk1.plx9054_base_addr + INTCSR);
+
+	if ((intcsr & LOCAL_INTERRUPT_TEST) == LOCAL_INTERRUPT_TEST) {
+		writel(intcsr & ~(1 << PCI_INTERRUPT_ENABLE),
+				dev->rdk1.plx9054_base_addr + INTCSR);
+		net2272_handle_stat1_irqs(dev, net2272_read(dev, IRQSTAT1));
+		net2272_handle_stat0_irqs(dev, net2272_read(dev, IRQSTAT0));
+		intcsr = readl(dev->rdk1.plx9054_base_addr + INTCSR);
+		writel(intcsr | (1 << PCI_INTERRUPT_ENABLE),
+			dev->rdk1.plx9054_base_addr + INTCSR);
+	}
+	if ((intcsr & DMA_CHANNEL_0_TEST) == DMA_CHANNEL_0_TEST) {
+		writeb((1 << CHANNEL_CLEAR_INTERRUPT | (0 << CHANNEL_ENABLE)),
+				dev->rdk1.plx9054_base_addr + DMACSR0);
+
+		dmareq = net2272_read(dev, DMAREQ);
+		if (dmareq & 0x01)
+			net2272_handle_dma(&dev->ep[2]);
+		else
+			net2272_handle_dma(&dev->ep[1]);
+	}
+#endif
+#if defined(PLX_PCI_RDK2)
+	/* see if PCI int for us by checking irqstat */
+	intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT);
+	if (!intcsr & (1 << NET2272_PCI_IRQ))
+		return IRQ_NONE;
+	/* check dma interrupts */
+#endif
+	/* Platform/devcice interrupt handler */
+#if !defined(PLX_PCI_RDK)
+	net2272_handle_stat1_irqs(dev, net2272_read(dev, IRQSTAT1));
+	net2272_handle_stat0_irqs(dev, net2272_read(dev, IRQSTAT0));
+#endif
+	spin_unlock(&dev->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int net2272_present(struct net2272 *dev)
+{
+	/*
+	 * Quick test to see if CPU can communicate properly with the NET2272.
+	 * Verifies connection using writes and reads to write/read and
+	 * read-only registers.
+	 *
+	 * This routine is strongly recommended especially during early bring-up
+	 * of new hardware, however for designs that do not apply Power On System
+	 * Tests (POST) it may discarded (or perhaps minimized).
+	 */
+	unsigned int ii;
+	u8 val, refval;
+
+	/* Verify NET2272 write/read SCRATCH register can write and read */
+	refval = net2272_read(dev, SCRATCH);
+	for (ii = 0; ii < 0x100; ii += 7) {
+		net2272_write(dev, SCRATCH, ii);
+		val = net2272_read(dev, SCRATCH);
+		if (val != ii) {
+			dev_dbg(dev->dev,
+				"%s: write/read SCRATCH register test failed: "
+				"wrote:0x%2.2x, read:0x%2.2x\n",
+				__func__, ii, val);
+			return -EINVAL;
+		}
+	}
+	/* To be nice, we write the original SCRATCH value back: */
+	net2272_write(dev, SCRATCH, refval);
+
+	/* Verify NET2272 CHIPREV register is read-only: */
+	refval = net2272_read(dev, CHIPREV_2272);
+	for (ii = 0; ii < 0x100; ii += 7) {
+		net2272_write(dev, CHIPREV_2272, ii);
+		val = net2272_read(dev, CHIPREV_2272);
+		if (val != refval) {
+			dev_dbg(dev->dev,
+				"%s: write/read CHIPREV register test failed: "
+				"wrote 0x%2.2x, read:0x%2.2x expected:0x%2.2x\n",
+				__func__, ii, val, refval);
+			return -EINVAL;
+		}
+	}
+
+	/*
+	 * Verify NET2272's "NET2270 legacy revision" register
+	 *  - NET2272 has two revision registers. The NET2270 legacy revision
+	 *    register should read the same value, regardless of the NET2272
+	 *    silicon revision.  The legacy register applies to NET2270
+	 *    firmware being applied to the NET2272.
+	 */
+	val = net2272_read(dev, CHIPREV_LEGACY);
+	if (val != NET2270_LEGACY_REV) {
+		/*
+		 * Unexpected legacy revision value
+		 * - Perhaps the chip is a NET2270?
+		 */
+		dev_dbg(dev->dev,
+			"%s: WARNING: UNEXPECTED NET2272 LEGACY REGISTER VALUE:\n"
+			" - CHIPREV_LEGACY: expected 0x%2.2x, got:0x%2.2x. (Not NET2272?)\n",
+			__func__, NET2270_LEGACY_REV, val);
+		return -EINVAL;
+	}
+
+	/*
+	 * Verify NET2272 silicon revision
+	 *  - This revision register is appropriate for the silicon version
+	 *    of the NET2272
+	 */
+	val = net2272_read(dev, CHIPREV_2272);
+	switch (val) {
+	case CHIPREV_NET2272_R1:
+		/*
+		 * NET2272 Rev 1 has DMA related errata:
+		 *  - Newer silicon (Rev 1A or better) required
+		 */
+		dev_dbg(dev->dev,
+			"%s: Rev 1 detected: newer silicon recommended for DMA support\n",
+			__func__);
+		break;
+	case CHIPREV_NET2272_R1A:
+		break;
+	default:
+		/* NET2272 silicon version *may* not work with this firmware */
+		dev_dbg(dev->dev,
+			"%s: unexpected silicon revision register value: "
+			" CHIPREV_2272: 0x%2.2x\n",
+			__func__, val);
+		/*
+		 * Return Success, even though the chip rev is not an expected value
+		 *  - Older, pre-built firmware can attempt to operate on newer silicon
+		 *  - Often, new silicon is perfectly compatible
+		 */
+	}
+
+	/* Success: NET2272 checks out OK */
+	return 0;
+}
+
+static void
+net2272_gadget_release(struct device *_dev)
+{
+	struct net2272 *dev = dev_get_drvdata(_dev);
+	kfree(dev);
+}
+
+/*---------------------------------------------------------------------------*/
+
+static void __devexit
+net2272_remove(struct net2272 *dev)
+{
+	usb_del_gadget_udc(&dev->gadget);
+
+	/* start with the driver above us */
+	if (dev->driver) {
+		/* should have been done already by driver model core */
+		dev_warn(dev->dev, "pci remove, driver '%s' is still registered\n",
+			dev->driver->driver.name);
+		usb_gadget_unregister_driver(dev->driver);
+	}
+
+	free_irq(dev->irq, dev);
+	iounmap(dev->base_addr);
+
+	device_unregister(&dev->gadget.dev);
+	device_remove_file(dev->dev, &dev_attr_registers);
+
+	dev_info(dev->dev, "unbind\n");
+	the_controller = NULL;
+}
+
+static struct net2272 * __devinit
+net2272_probe_init(struct device *dev, unsigned int irq)
+{
+	struct net2272 *ret;
+
+	if (the_controller) {
+		dev_warn(dev, "ignoring\n");
+		return ERR_PTR(-EBUSY);
+	}
+
+	if (!irq) {
+		dev_dbg(dev, "No IRQ!\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	/* alloc, and start init */
+	ret = kzalloc(sizeof(*ret), GFP_KERNEL);
+	if (!ret)
+		return ERR_PTR(-ENOMEM);
+
+	spin_lock_init(&ret->lock);
+	ret->irq = irq;
+	ret->dev = dev;
+	ret->gadget.ops = &net2272_ops;
+	ret->gadget.is_dualspeed = 1;
+
+	/* the "gadget" abstracts/virtualizes the controller */
+	dev_set_name(&ret->gadget.dev, "gadget");
+	ret->gadget.dev.parent = dev;
+	ret->gadget.dev.dma_mask = dev->dma_mask;
+	ret->gadget.dev.release = net2272_gadget_release;
+	ret->gadget.name = driver_name;
+
+	return ret;
+}
+
+static int __devinit
+net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
+{
+	int ret;
+
+	/* See if there... */
+	if (net2272_present(dev)) {
+		dev_warn(dev->dev, "2272 not found!\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	net2272_usb_reset(dev);
+	net2272_usb_reinit(dev);
+
+	ret = request_irq(dev->irq, net2272_irq, irqflags, driver_name, dev);
+	if (ret) {
+		dev_err(dev->dev, "request interrupt %i failed\n", dev->irq);
+		goto err;
+	}
+
+	dev->chiprev = net2272_read(dev, CHIPREV_2272);
+
+	/* done */
+	dev_info(dev->dev, "%s\n", driver_desc);
+	dev_info(dev->dev, "irq %i, mem %p, chip rev %04x, dma %s\n",
+		dev->irq, dev->base_addr, dev->chiprev,
+		dma_mode_string());
+	dev_info(dev->dev, "version: %s\n", driver_vers);
+
+	the_controller = dev;
+
+	ret = device_register(&dev->gadget.dev);
+	if (ret)
+		goto err_irq;
+	ret = device_create_file(dev->dev, &dev_attr_registers);
+	if (ret)
+		goto err_dev_reg;
+
+	ret = usb_add_gadget_udc(dev->dev, &dev->gadget);
+	if (ret)
+		goto err_add_udc;
+
+	return 0;
+
+err_add_udc:
+	device_remove_file(dev->dev, &dev_attr_registers);
+ err_dev_reg:
+	device_unregister(&dev->gadget.dev);
+ err_irq:
+	free_irq(dev->irq, dev);
+ err:
+	return ret;
+}
+
+#ifdef CONFIG_PCI
+
+/*
+ * wrap this driver around the specified device, but
+ * don't respond over USB until a gadget driver binds to us
+ */
+
+static int __devinit
+net2272_rdk1_probe(struct pci_dev *pdev, struct net2272 *dev)
+{
+	unsigned long resource, len, tmp;
+	void __iomem *mem_mapped_addr[4];
+	int ret, i;
+
+	/*
+	 * BAR 0 holds PLX 9054 config registers
+	 * BAR 1 is i/o memory; unused here
+	 * BAR 2 holds EPLD config registers
+	 * BAR 3 holds NET2272 registers
+	 */
+
+	/* Find and map all address spaces */
+	for (i = 0; i < 4; ++i) {
+		if (i == 1)
+			continue;	/* BAR1 unused */
+
+		resource = pci_resource_start(pdev, i);
+		len = pci_resource_len(pdev, i);
+
+		if (!request_mem_region(resource, len, driver_name)) {
+			dev_dbg(dev->dev, "controller already in use\n");
+			ret = -EBUSY;
+			goto err;
+		}
+
+		mem_mapped_addr[i] = ioremap_nocache(resource, len);
+		if (mem_mapped_addr[i] == NULL) {
+			release_mem_region(resource, len);
+			dev_dbg(dev->dev, "can't map memory\n");
+			ret = -EFAULT;
+			goto err;
+		}
+	}
+
+	dev->rdk1.plx9054_base_addr = mem_mapped_addr[0];
+	dev->rdk1.epld_base_addr = mem_mapped_addr[2];
+	dev->base_addr = mem_mapped_addr[3];
+
+	/* Set PLX 9054 bus width (16 bits) */
+	tmp = readl(dev->rdk1.plx9054_base_addr + LBRD1);
+	writel((tmp & ~(3 << MEMORY_SPACE_LOCAL_BUS_WIDTH)) | W16_BIT,
+			dev->rdk1.plx9054_base_addr + LBRD1);
+
+	/* Enable PLX 9054 Interrupts */
+	writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) |
+			(1 << PCI_INTERRUPT_ENABLE) |
+			(1 << LOCAL_INTERRUPT_INPUT_ENABLE),
+			dev->rdk1.plx9054_base_addr + INTCSR);
+
+	writeb((1 << CHANNEL_CLEAR_INTERRUPT | (0 << CHANNEL_ENABLE)),
+			dev->rdk1.plx9054_base_addr + DMACSR0);
+
+	/* reset */
+	writeb((1 << EPLD_DMA_ENABLE) |
+		(1 << DMA_CTL_DACK) |
+		(1 << DMA_TIMEOUT_ENABLE) |
+		(1 << USER) |
+		(0 << MPX_MODE) |
+		(1 << BUSWIDTH) |
+		(1 << NET2272_RESET),
+		dev->base_addr + EPLD_IO_CONTROL_REGISTER);
+
+	mb();
+	writeb(readb(dev->base_addr + EPLD_IO_CONTROL_REGISTER) &
+		~(1 << NET2272_RESET),
+		dev->base_addr + EPLD_IO_CONTROL_REGISTER);
+	udelay(200);
+
+	return 0;
+
+ err:
+	while (--i >= 0) {
+		iounmap(mem_mapped_addr[i]);
+		release_mem_region(pci_resource_start(pdev, i),
+			pci_resource_len(pdev, i));
+	}
+
+	return ret;
+}
+
+static int __devinit
+net2272_rdk2_probe(struct pci_dev *pdev, struct net2272 *dev)
+{
+	unsigned long resource, len;
+	void __iomem *mem_mapped_addr[2];
+	int ret, i;
+
+	/*
+	 * BAR 0 holds FGPA config registers
+	 * BAR 1 holds NET2272 registers
+	 */
+
+	/* Find and map all address spaces, bar2-3 unused in rdk 2 */
+	for (i = 0; i < 2; ++i) {
+		resource = pci_resource_start(pdev, i);
+		len = pci_resource_len(pdev, i);
+
+		if (!request_mem_region(resource, len, driver_name)) {
+			dev_dbg(dev->dev, "controller already in use\n");
+			ret = -EBUSY;
+			goto err;
+		}
+
+		mem_mapped_addr[i] = ioremap_nocache(resource, len);
+		if (mem_mapped_addr[i] == NULL) {
+			release_mem_region(resource, len);
+			dev_dbg(dev->dev, "can't map memory\n");
+			ret = -EFAULT;
+			goto err;
+		}
+	}
+
+	dev->rdk2.fpga_base_addr = mem_mapped_addr[0];
+	dev->base_addr = mem_mapped_addr[1];
+
+	mb();
+	/* Set 2272 bus width (16 bits) and reset */
+	writel((1 << CHIP_RESET), dev->rdk2.fpga_base_addr + RDK2_LOCCTLRDK);
+	udelay(200);
+	writel((1 << BUS_WIDTH), dev->rdk2.fpga_base_addr + RDK2_LOCCTLRDK);
+	/* Print fpga version number */
+	dev_info(dev->dev, "RDK2 FPGA version %08x\n",
+		readl(dev->rdk2.fpga_base_addr + RDK2_FPGAREV));
+	/* Enable FPGA Interrupts */
+	writel((1 << NET2272_PCI_IRQ), dev->rdk2.fpga_base_addr + RDK2_IRQENB);
+
+	return 0;
+
+ err:
+	while (--i >= 0) {
+		iounmap(mem_mapped_addr[i]);
+		release_mem_region(pci_resource_start(pdev, i),
+			pci_resource_len(pdev, i));
+	}
+
+	return ret;
+}
+
+static int __devinit
+net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct net2272 *dev;
+	int ret;
+
+	dev = net2272_probe_init(&pdev->dev, pdev->irq);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+	dev->dev_id = pdev->device;
+
+	if (pci_enable_device(pdev) < 0) {
+		ret = -ENODEV;
+		goto err_free;
+	}
+
+	pci_set_master(pdev);
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_RDK1: ret = net2272_rdk1_probe(pdev, dev); break;
+	case PCI_DEVICE_ID_RDK2: ret = net2272_rdk2_probe(pdev, dev); break;
+	default: BUG();
+	}
+	if (ret)
+		goto err_pci;
+
+	ret = net2272_probe_fin(dev, 0);
+	if (ret)
+		goto err_pci;
+
+	pci_set_drvdata(pdev, dev);
+
+	return 0;
+
+ err_pci:
+	pci_disable_device(pdev);
+ err_free:
+	kfree(dev);
+
+	return ret;
+}
+
+static void __devexit
+net2272_rdk1_remove(struct pci_dev *pdev, struct net2272 *dev)
+{
+	int i;
+
+	/* disable PLX 9054 interrupts */
+	writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) &
+		~(1 << PCI_INTERRUPT_ENABLE),
+		dev->rdk1.plx9054_base_addr + INTCSR);
+
+	/* clean up resources allocated during probe() */
+	iounmap(dev->rdk1.plx9054_base_addr);
+	iounmap(dev->rdk1.epld_base_addr);
+
+	for (i = 0; i < 4; ++i) {
+		if (i == 1)
+			continue;	/* BAR1 unused */
+		release_mem_region(pci_resource_start(pdev, i),
+			pci_resource_len(pdev, i));
+	}
+}
+
+static void __devexit
+net2272_rdk2_remove(struct pci_dev *pdev, struct net2272 *dev)
+{
+	int i;
+
+	/* disable fpga interrupts
+	writel(readl(dev->rdk1.plx9054_base_addr + INTCSR) &
+			~(1 << PCI_INTERRUPT_ENABLE),
+			dev->rdk1.plx9054_base_addr + INTCSR);
+	*/
+
+	/* clean up resources allocated during probe() */
+	iounmap(dev->rdk2.fpga_base_addr);
+
+	for (i = 0; i < 2; ++i)
+		release_mem_region(pci_resource_start(pdev, i),
+			pci_resource_len(pdev, i));
+}
+
+static void __devexit
+net2272_pci_remove(struct pci_dev *pdev)
+{
+	struct net2272 *dev = pci_get_drvdata(pdev);
+
+	net2272_remove(dev);
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_RDK1: net2272_rdk1_remove(pdev, dev); break;
+	case PCI_DEVICE_ID_RDK2: net2272_rdk2_remove(pdev, dev); break;
+	default: BUG();
+	}
+
+	pci_disable_device(pdev);
+
+	kfree(dev);
+}
+
+/* Table of matching PCI IDs */
+static struct pci_device_id __devinitdata pci_ids[] = {
+	{	/* RDK 1 card */
+		.class       = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe),
+		.class_mask  = 0,
+		.vendor      = PCI_VENDOR_ID_PLX,
+		.device      = PCI_DEVICE_ID_RDK1,
+		.subvendor   = PCI_ANY_ID,
+		.subdevice   = PCI_ANY_ID,
+	},
+	{	/* RDK 2 card */
+		.class       = ((PCI_CLASS_BRIDGE_OTHER << 8) | 0xfe),
+		.class_mask  = 0,
+		.vendor      = PCI_VENDOR_ID_PLX,
+		.device      = PCI_DEVICE_ID_RDK2,
+		.subvendor   = PCI_ANY_ID,
+		.subdevice   = PCI_ANY_ID,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver net2272_pci_driver = {
+	.name     = driver_name,
+	.id_table = pci_ids,
+
+	.probe    = net2272_pci_probe,
+	.remove   = __devexit_p(net2272_pci_remove),
+};
+
+static int net2272_pci_register(void)
+{
+	return pci_register_driver(&net2272_pci_driver);
+}
+
+static void net2272_pci_unregister(void)
+{
+	pci_unregister_driver(&net2272_pci_driver);
+}
+
+#else
+static inline int net2272_pci_register(void) { return 0; }
+static inline void net2272_pci_unregister(void) { }
+#endif
+
+/*---------------------------------------------------------------------------*/
+
+static int __devinit
+net2272_plat_probe(struct platform_device *pdev)
+{
+	struct net2272 *dev;
+	int ret;
+	unsigned int irqflags;
+	resource_size_t base, len;
+	struct resource *iomem, *iomem_bus, *irq_res;
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iomem_bus = platform_get_resource(pdev, IORESOURCE_BUS, 0);
+	if (!irq_res || !iomem) {
+		dev_err(&pdev->dev, "must provide irq/base addr");
+		return -EINVAL;
+	}
+
+	dev = net2272_probe_init(&pdev->dev, irq_res->start);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+
+	irqflags = 0;
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE)
+		irqflags |= IRQF_TRIGGER_RISING;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE)
+		irqflags |= IRQF_TRIGGER_FALLING;
+	if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL)
+		irqflags |= IRQF_TRIGGER_HIGH;
+	if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
+		irqflags |= IRQF_TRIGGER_LOW;
+
+	base = iomem->start;
+	len = resource_size(iomem);
+	if (iomem_bus)
+		dev->base_shift = iomem_bus->start;
+
+	if (!request_mem_region(base, len, driver_name)) {
+		dev_dbg(dev->dev, "get request memory region!\n");
+		ret = -EBUSY;
+		goto err;
+	}
+	dev->base_addr = ioremap_nocache(base, len);
+	if (!dev->base_addr) {
+		dev_dbg(dev->dev, "can't map memory\n");
+		ret = -EFAULT;
+		goto err_req;
+	}
+
+	ret = net2272_probe_fin(dev, IRQF_TRIGGER_LOW);
+	if (ret)
+		goto err_io;
+
+	platform_set_drvdata(pdev, dev);
+	dev_info(&pdev->dev, "running in 16-bit, %sbyte swap local bus mode\n",
+		(net2272_read(dev, LOCCTL) & (1 << BYTE_SWAP)) ? "" : "no ");
+
+	the_controller = dev;
+
+	return 0;
+
+ err_io:
+	iounmap(dev->base_addr);
+ err_req:
+	release_mem_region(base, len);
+ err:
+	return ret;
+}
+
+static int __devexit
+net2272_plat_remove(struct platform_device *pdev)
+{
+	struct net2272 *dev = platform_get_drvdata(pdev);
+
+	net2272_remove(dev);
+
+	release_mem_region(pdev->resource[0].start,
+		resource_size(&pdev->resource[0]));
+
+	kfree(dev);
+
+	return 0;
+}
+
+static struct platform_driver net2272_plat_driver = {
+	.probe   = net2272_plat_probe,
+	.remove  = __devexit_p(net2272_plat_remove),
+	.driver  = {
+		.name  = driver_name,
+		.owner = THIS_MODULE,
+	},
+	/* FIXME .suspend, .resume */
+};
+MODULE_ALIAS("platform:net2272");
+
+static int __init net2272_init(void)
+{
+	int ret;
+
+	ret = net2272_pci_register();
+	if (ret)
+		return ret;
+	ret = platform_driver_register(&net2272_plat_driver);
+	if (ret)
+		goto err_pci;
+	return ret;
+
+err_pci:
+	net2272_pci_unregister();
+	return ret;
+}
+module_init(net2272_init);
+
+static void __exit net2272_cleanup(void)
+{
+	net2272_pci_unregister();
+	platform_driver_unregister(&net2272_plat_driver);
+}
+module_exit(net2272_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("PLX Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/net2272.h b/drivers/usb/gadget/net2272.h
new file mode 100644
index 00000000000..e5950578935
--- /dev/null
+++ b/drivers/usb/gadget/net2272.h
@@ -0,0 +1,601 @@
+/*
+ * PLX NET2272 high/full speed USB device controller
+ *
+ * Copyright (C) 2005-2006 PLX Technology, Inc.
+ * Copyright (C) 2006-2011 Analog Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __NET2272_H__
+#define __NET2272_H__
+
+/* Main Registers */
+#define REGADDRPTR			0x00
+#define REGDATA				0x01
+#define IRQSTAT0			0x02
+#define 	ENDPOINT_0_INTERRUPT			0
+#define 	ENDPOINT_A_INTERRUPT			1
+#define 	ENDPOINT_B_INTERRUPT			2
+#define 	ENDPOINT_C_INTERRUPT			3
+#define 	VIRTUALIZED_ENDPOINT_INTERRUPT		4
+#define 	SETUP_PACKET_INTERRUPT			5
+#define 	DMA_DONE_INTERRUPT			6
+#define 	SOF_INTERRUPT				7
+#define IRQSTAT1			0x03
+#define 	CONTROL_STATUS_INTERRUPT		1
+#define 	VBUS_INTERRUPT				2
+#define 	SUSPEND_REQUEST_INTERRUPT		3
+#define 	SUSPEND_REQUEST_CHANGE_INTERRUPT	4
+#define 	RESUME_INTERRUPT			5
+#define 	ROOT_PORT_RESET_INTERRUPT		6
+#define 	RESET_STATUS				7
+#define PAGESEL				0x04
+#define DMAREQ				0x1c
+#define 	DMA_ENDPOINT_SELECT			0
+#define 	DREQ_POLARITY				1
+#define 	DACK_POLARITY				2
+#define 	EOT_POLARITY				3
+#define 	DMA_CONTROL_DACK			4
+#define 	DMA_REQUEST_ENABLE			5
+#define 	DMA_REQUEST				6
+#define 	DMA_BUFFER_VALID			7
+#define SCRATCH				0x1d
+#define IRQENB0				0x20
+#define 	ENDPOINT_0_INTERRUPT_ENABLE		0
+#define 	ENDPOINT_A_INTERRUPT_ENABLE		1
+#define 	ENDPOINT_B_INTERRUPT_ENABLE		2
+#define 	ENDPOINT_C_INTERRUPT_ENABLE		3
+#define 	VIRTUALIZED_ENDPOINT_INTERRUPT_ENABLE	4
+#define 	SETUP_PACKET_INTERRUPT_ENABLE		5
+#define 	DMA_DONE_INTERRUPT_ENABLE		6
+#define 	SOF_INTERRUPT_ENABLE			7
+#define IRQENB1				0x21
+#define 	VBUS_INTERRUPT_ENABLE			2
+#define 	SUSPEND_REQUEST_INTERRUPT_ENABLE	3
+#define 	SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE	4
+#define 	RESUME_INTERRUPT_ENABLE			5
+#define 	ROOT_PORT_RESET_INTERRUPT_ENABLE	6
+#define LOCCTL				0x22
+#define 	DATA_WIDTH				0
+#define 	LOCAL_CLOCK_OUTPUT			1
+#define 		LOCAL_CLOCK_OUTPUT_OFF			0
+#define 		LOCAL_CLOCK_OUTPUT_3_75MHZ		1
+#define 		LOCAL_CLOCK_OUTPUT_7_5MHZ		2
+#define 		LOCAL_CLOCK_OUTPUT_15MHZ		3
+#define 		LOCAL_CLOCK_OUTPUT_30MHZ		4
+#define 		LOCAL_CLOCK_OUTPUT_60MHZ		5
+#define 	DMA_SPLIT_BUS_MODE			4
+#define 	BYTE_SWAP				5
+#define 	BUFFER_CONFIGURATION			6
+#define 		BUFFER_CONFIGURATION_EPA512_EPB512	0
+#define 		BUFFER_CONFIGURATION_EPA1024_EPB512	1
+#define 		BUFFER_CONFIGURATION_EPA1024_EPB1024	2
+#define 		BUFFER_CONFIGURATION_EPA1024DB		3
+#define CHIPREV_LEGACY			0x23
+#define 		NET2270_LEGACY_REV			0x40
+#define LOCCTL1				0x24
+#define 	DMA_MODE				0
+#define 		SLOW_DREQ				0
+#define 		FAST_DREQ				1
+#define 		BURST_MODE				2
+#define 	DMA_DACK_ENABLE				2
+#define CHIPREV_2272			0x25
+#define 		CHIPREV_NET2272_R1			0x10
+#define 		CHIPREV_NET2272_R1A			0x11
+/* USB Registers */
+#define USBCTL0				0x18
+#define 	IO_WAKEUP_ENABLE			1
+#define 	USB_DETECT_ENABLE			3
+#define 	USB_ROOT_PORT_WAKEUP_ENABLE		5
+#define USBCTL1				0x19
+#define 	VBUS_PIN				0
+#define 		USB_FULL_SPEED				1
+#define 		USB_HIGH_SPEED				2
+#define 	GENERATE_RESUME				3
+#define 	VIRTUAL_ENDPOINT_ENABLE			4
+#define FRAME0				0x1a
+#define FRAME1				0x1b
+#define OURADDR				0x30
+#define 	FORCE_IMMEDIATE				7
+#define USBDIAG				0x31
+#define 	FORCE_TRANSMIT_CRC_ERROR		0
+#define 	PREVENT_TRANSMIT_BIT_STUFF		1
+#define 	FORCE_RECEIVE_ERROR			2
+#define 	FAST_TIMES				4
+#define USBTEST				0x32
+#define 	TEST_MODE_SELECT			0
+#define 		NORMAL_OPERATION			0
+#define 		TEST_J					1
+#define 		TEST_K					2
+#define 		TEST_SE0_NAK				3
+#define 		TEST_PACKET				4
+#define 		TEST_FORCE_ENABLE			5
+#define XCVRDIAG			0x33
+#define 	FORCE_FULL_SPEED			2
+#define 	FORCE_HIGH_SPEED			3
+#define 	OPMODE					4
+#define 		NORMAL_OPERATION			0
+#define 		NON_DRIVING				1
+#define 		DISABLE_BITSTUFF_AND_NRZI_ENCODE	2
+#define 	LINESTATE				6
+#define 		SE0_STATE				0
+#define 		J_STATE					1
+#define 		K_STATE					2
+#define 		SE1_STATE				3
+#define VIRTOUT0			0x34
+#define VIRTOUT1			0x35
+#define VIRTIN0				0x36
+#define VIRTIN1				0x37
+#define SETUP0				0x40
+#define SETUP1				0x41
+#define SETUP2				0x42
+#define SETUP3				0x43
+#define SETUP4				0x44
+#define SETUP5				0x45
+#define SETUP6				0x46
+#define SETUP7				0x47
+/* Endpoint Registers (Paged via PAGESEL) */
+#define EP_DATA				0x05
+#define EP_STAT0			0x06
+#define 	DATA_IN_TOKEN_INTERRUPT			0
+#define 	DATA_OUT_TOKEN_INTERRUPT		1
+#define 	DATA_PACKET_TRANSMITTED_INTERRUPT	2
+#define 	DATA_PACKET_RECEIVED_INTERRUPT		3
+#define 	SHORT_PACKET_TRANSFERRED_INTERRUPT	4
+#define 	NAK_OUT_PACKETS				5
+#define 	BUFFER_EMPTY				6
+#define 	BUFFER_FULL				7
+#define EP_STAT1			0x07
+#define 	TIMEOUT					0
+#define 	USB_OUT_ACK_SENT			1
+#define 	USB_OUT_NAK_SENT			2
+#define 	USB_IN_ACK_RCVD				3
+#define 	USB_IN_NAK_SENT				4
+#define 	USB_STALL_SENT				5
+#define 	LOCAL_OUT_ZLP				6
+#define 	BUFFER_FLUSH				7
+#define EP_TRANSFER0			0x08
+#define EP_TRANSFER1			0x09
+#define EP_TRANSFER2			0x0a
+#define EP_IRQENB			0x0b
+#define 	DATA_IN_TOKEN_INTERRUPT_ENABLE		0
+#define 	DATA_OUT_TOKEN_INTERRUPT_ENABLE		1
+#define 	DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE	2
+#define 	DATA_PACKET_RECEIVED_INTERRUPT_ENABLE	3
+#define 	SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE	4
+#define EP_AVAIL0			0x0c
+#define EP_AVAIL1			0x0d
+#define EP_RSPCLR			0x0e
+#define EP_RSPSET			0x0f
+#define 	ENDPOINT_HALT				0
+#define 	ENDPOINT_TOGGLE				1
+#define 	NAK_OUT_PACKETS_MODE			2
+#define 	CONTROL_STATUS_PHASE_HANDSHAKE		3
+#define 	INTERRUPT_MODE				4
+#define 	AUTOVALIDATE				5
+#define 	HIDE_STATUS_PHASE			6
+#define 	ALT_NAK_OUT_PACKETS			7
+#define EP_MAXPKT0			0x28
+#define EP_MAXPKT1			0x29
+#define 	ADDITIONAL_TRANSACTION_OPPORTUNITIES	3
+#define 		NONE_ADDITIONAL_TRANSACTION		0
+#define 		ONE_ADDITIONAL_TRANSACTION		1
+#define 		TWO_ADDITIONAL_TRANSACTION		2
+#define EP_CFG				0x2a
+#define 	ENDPOINT_NUMBER				0
+#define 	ENDPOINT_DIRECTION			4
+#define 	ENDPOINT_TYPE				5
+#define 	ENDPOINT_ENABLE				7
+#define EP_HBW				0x2b
+#define 	HIGH_BANDWIDTH_OUT_TRANSACTION_PID	0
+#define 		DATA0_PID				0
+#define 		DATA1_PID				1
+#define 		DATA2_PID				2
+#define 		MDATA_PID				3
+#define EP_BUFF_STATES			0x2c
+#define 	BUFFER_A_STATE				0
+#define 	BUFFER_B_STATE				2
+#define 		BUFF_FREE				0
+#define 		BUFF_VALID				1
+#define 		BUFF_LCL				2
+#define 		BUFF_USB				3
+
+/*---------------------------------------------------------------------------*/
+
+#define PCI_DEVICE_ID_RDK1	0x9054
+
+/* PCI-RDK EPLD Registers */
+#define RDK_EPLD_IO_REGISTER1		0x00000000
+#define 	RDK_EPLD_USB_RESET				0
+#define 	RDK_EPLD_USB_POWERDOWN				1
+#define 	RDK_EPLD_USB_WAKEUP				2
+#define 	RDK_EPLD_USB_EOT				3
+#define 	RDK_EPLD_DPPULL					4
+#define RDK_EPLD_IO_REGISTER2		0x00000004
+#define 	RDK_EPLD_BUSWIDTH				0
+#define 	RDK_EPLD_USER					2
+#define 	RDK_EPLD_RESET_INTERRUPT_ENABLE			3
+#define 	RDK_EPLD_DMA_TIMEOUT_ENABLE			4
+#define RDK_EPLD_STATUS_REGISTER	0x00000008
+#define 	RDK_EPLD_USB_LRESET				0
+#define RDK_EPLD_REVISION_REGISTER	0x0000000c
+
+/* PCI-RDK PLX 9054 Registers */
+#define INTCSR				0x68
+#define 	PCI_INTERRUPT_ENABLE				8
+#define 	LOCAL_INTERRUPT_INPUT_ENABLE			11
+#define 	LOCAL_INPUT_INTERRUPT_ACTIVE			15
+#define 	LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE		18
+#define 	LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE		19
+#define 	DMA_CHANNEL_0_INTERRUPT_ACTIVE			21
+#define 	DMA_CHANNEL_1_INTERRUPT_ACTIVE			22
+#define CNTRL				0x6C
+#define 	RELOAD_CONFIGURATION_REGISTERS			29
+#define 	PCI_ADAPTER_SOFTWARE_RESET			30
+#define DMAMODE0			0x80
+#define 	LOCAL_BUS_WIDTH					0
+#define 	INTERNAL_WAIT_STATES				2
+#define 	TA_READY_INPUT_ENABLE				6
+#define 	LOCAL_BURST_ENABLE				8
+#define 	SCATTER_GATHER_MODE				9
+#define 	DONE_INTERRUPT_ENABLE				10
+#define 	LOCAL_ADDRESSING_MODE				11
+#define 	DEMAND_MODE					12
+#define 	DMA_EOT_ENABLE					14
+#define 	FAST_SLOW_TERMINATE_MODE_SELECT			15
+#define 	DMA_CHANNEL_INTERRUPT_SELECT			17
+#define DMAPADR0			0x84
+#define DMALADR0			0x88
+#define DMASIZ0				0x8c
+#define DMADPR0				0x90
+#define 	DESCRIPTOR_LOCATION				0
+#define 	END_OF_CHAIN					1
+#define 	INTERRUPT_AFTER_TERMINAL_COUNT			2
+#define 	DIRECTION_OF_TRANSFER				3
+#define DMACSR0				0xa8
+#define 	CHANNEL_ENABLE					0
+#define 	CHANNEL_START					1
+#define 	CHANNEL_ABORT					2
+#define 	CHANNEL_CLEAR_INTERRUPT				3
+#define 	CHANNEL_DONE					4
+#define DMATHR				0xb0
+#define LBRD1				0xf8
+#define 	MEMORY_SPACE_LOCAL_BUS_WIDTH			0
+#define 	W8_BIT						0
+#define 	W16_BIT						1
+
+/* Special OR'ing of INTCSR bits */
+#define LOCAL_INTERRUPT_TEST \
+	((1 << LOCAL_INPUT_INTERRUPT_ACTIVE) | \
+	 (1 << LOCAL_INTERRUPT_INPUT_ENABLE))
+
+#define DMA_CHANNEL_0_TEST \
+	((1 << DMA_CHANNEL_0_INTERRUPT_ACTIVE) | \
+	 (1 << LOCAL_DMA_CHANNEL_0_INTERRUPT_ENABLE))
+
+#define DMA_CHANNEL_1_TEST \
+	((1 << DMA_CHANNEL_1_INTERRUPT_ACTIVE) | \
+	 (1 << LOCAL_DMA_CHANNEL_1_INTERRUPT_ENABLE))
+
+/* EPLD Registers */
+#define RDK_EPLD_IO_REGISTER1			0x00000000
+#define 	RDK_EPLD_USB_RESET			0
+#define 	RDK_EPLD_USB_POWERDOWN			1
+#define 	RDK_EPLD_USB_WAKEUP			2
+#define 	RDK_EPLD_USB_EOT			3
+#define 	RDK_EPLD_DPPULL				4
+#define RDK_EPLD_IO_REGISTER2			0x00000004
+#define 	RDK_EPLD_BUSWIDTH			0
+#define 	RDK_EPLD_USER				2
+#define 	RDK_EPLD_RESET_INTERRUPT_ENABLE		3
+#define 	RDK_EPLD_DMA_TIMEOUT_ENABLE		4
+#define RDK_EPLD_STATUS_REGISTER		0x00000008
+#define RDK_EPLD_USB_LRESET				0
+#define RDK_EPLD_REVISION_REGISTER		0x0000000c
+
+#define EPLD_IO_CONTROL_REGISTER		0x400
+#define 	NET2272_RESET				0
+#define 	BUSWIDTH				1
+#define 	MPX_MODE				3
+#define 	USER					4
+#define 	DMA_TIMEOUT_ENABLE			5
+#define 	DMA_CTL_DACK				6
+#define 	EPLD_DMA_ENABLE				7
+#define EPLD_DMA_CONTROL_REGISTER		0x800
+#define 	SPLIT_DMA_MODE				0
+#define 	SPLIT_DMA_DIRECTION			1
+#define 	SPLIT_DMA_ENABLE			2
+#define 	SPLIT_DMA_INTERRUPT_ENABLE		3
+#define 	SPLIT_DMA_INTERRUPT			4
+#define 	EPLD_DMA_MODE				5
+#define 	EPLD_DMA_CONTROLLER_ENABLE		7
+#define SPLIT_DMA_ADDRESS_LOW			0xc00
+#define SPLIT_DMA_ADDRESS_HIGH			0x1000
+#define SPLIT_DMA_BYTE_COUNT_LOW		0x1400
+#define SPLIT_DMA_BYTE_COUNT_HIGH		0x1800
+#define EPLD_REVISION_REGISTER			0x1c00
+#define SPLIT_DMA_RAM				0x4000
+#define DMA_RAM_SIZE				0x1000
+
+/*---------------------------------------------------------------------------*/
+
+#define PCI_DEVICE_ID_RDK2	0x3272
+
+/* PCI-RDK version 2 registers */
+
+/* Main Control Registers */
+
+#define RDK2_IRQENB			0x00
+#define RDK2_IRQSTAT			0x04
+#define 	PB7				23
+#define 	PB6				22
+#define 	PB5				21
+#define 	PB4				20
+#define 	PB3				19
+#define 	PB2				18
+#define 	PB1				17
+#define 	PB0				16
+#define 	GP3				23
+#define 	GP2				23
+#define 	GP1				23
+#define 	GP0				23
+#define 	DMA_RETRY_ABORT			6
+#define 	DMA_PAUSE_DONE			5
+#define 	DMA_ABORT_DONE			4
+#define 	DMA_OUT_FIFO_TRANSFER_DONE	3
+#define 	DMA_LOCAL_DONE			2
+#define 	DMA_PCI_DONE			1
+#define 	NET2272_PCI_IRQ			0
+
+#define RDK2_LOCCTLRDK			0x08
+#define 	CHIP_RESET			3
+#define 	SPLIT_DMA			2
+#define 	MULTIPLEX_MODE			1
+#define 	BUS_WIDTH			0
+
+#define RDK2_GPIOCTL			0x10
+#define 	GP3_OUT_ENABLE					7
+#define 	GP2_OUT_ENABLE					6
+#define 	GP1_OUT_ENABLE					5
+#define 	GP0_OUT_ENABLE					4
+#define 	GP3_DATA					3
+#define 	GP2_DATA					2
+#define 	GP1_DATA					1
+#define 	GP0_DATA					0
+
+#define RDK2_LEDSW			0x14
+#define 	LED3				27
+#define 	LED2				26
+#define 	LED1				25
+#define 	LED0				24
+#define 	PBUTTON				16
+#define 	DIPSW				0
+
+#define RDK2_DIAG			0x18
+#define 	RDK2_FAST_TIMES				2
+#define 	FORCE_PCI_SERR				1
+#define 	FORCE_PCI_INT				0
+#define RDK2_FPGAREV			0x1C
+
+/* Dma Control registers */
+#define RDK2_DMACTL			0x80
+#define 	ADDR_HOLD				24
+#define 	RETRY_COUNT				16	/* 23:16 */
+#define 	FIFO_THRESHOLD				11	/* 15:11 */
+#define 	MEM_WRITE_INVALIDATE			10
+#define 	READ_MULTIPLE				9
+#define 	READ_LINE				8
+#define 	RDK2_DMA_MODE				6	/* 7:6 */
+#define 	CONTROL_DACK				5
+#define 	EOT_ENABLE				4
+#define 	EOT_POLARITY				3
+#define 	DACK_POLARITY				2
+#define 	DREQ_POLARITY				1
+#define 	DMA_ENABLE				0
+
+#define RDK2_DMASTAT			0x84
+#define 	GATHER_COUNT				12	/* 14:12 */
+#define 	FIFO_COUNT				6	/* 11:6 */
+#define 	FIFO_FLUSH				5
+#define 	FIFO_TRANSFER				4
+#define 	PAUSE_DONE				3
+#define 	ABORT_DONE				2
+#define 	DMA_ABORT				1
+#define 	DMA_START				0
+
+#define RDK2_DMAPCICOUNT		0x88
+#define 	DMA_DIRECTION				31
+#define 	DMA_PCI_BYTE_COUNT			0	/* 0:23 */
+
+#define RDK2_DMALOCCOUNT		0x8C	/* 0:23 dma local byte count */
+
+#define RDK2_DMAADDR			0x90	/* 2:31 PCI bus starting address */
+
+/*---------------------------------------------------------------------------*/
+
+#define REG_INDEXED_THRESHOLD	(1 << 5)
+
+/* DRIVER DATA STRUCTURES and UTILITIES */
+struct net2272_ep {
+	struct usb_ep ep;
+	struct net2272 *dev;
+	unsigned long irqs;
+
+	/* analogous to a host-side qh */
+	struct list_head queue;
+	const struct usb_endpoint_descriptor *desc;
+	unsigned num:8,
+	         fifo_size:12,
+	         stopped:1,
+	         wedged:1,
+	         is_in:1,
+	         is_iso:1,
+	         dma:1,
+	         not_empty:1;
+};
+
+struct net2272 {
+	/* each device provides one gadget, several endpoints */
+	struct usb_gadget gadget;
+	struct device *dev;
+	unsigned short dev_id;
+
+	spinlock_t lock;
+	struct net2272_ep ep[4];
+	struct usb_gadget_driver *driver;
+	unsigned protocol_stall:1,
+	         softconnect:1,
+	         is_selfpowered:1,
+	         wakeup:1,
+	         dma_eot_polarity:1,
+	         dma_dack_polarity:1,
+	         dma_dreq_polarity:1,
+	         dma_busy:1;
+	u16 chiprev;
+	u8 pagesel;
+
+	unsigned int irq;
+	unsigned short fifo_mode;
+
+	unsigned int base_shift;
+	u16 __iomem *base_addr;
+	union {
+#ifdef CONFIG_PCI
+		struct {
+			void __iomem *plx9054_base_addr;
+			void __iomem *epld_base_addr;
+		} rdk1;
+		struct {
+			/* Bar0, Bar1 is base_addr both mem-mapped */
+			void __iomem *fpga_base_addr;
+		} rdk2;
+#endif
+	};
+};
+
+static void __iomem *
+net2272_reg_addr(struct net2272 *dev, unsigned int reg)
+{
+	return dev->base_addr + (reg << dev->base_shift);
+}
+
+static void
+net2272_write(struct net2272 *dev, unsigned int reg, u8 value)
+{
+	if (reg >= REG_INDEXED_THRESHOLD) {
+		/*
+		 * Indexed register; use REGADDRPTR/REGDATA
+		 *  - Save and restore REGADDRPTR. This prevents REGADDRPTR from
+		 *    changes between other code sections, but it is time consuming.
+		 *  - Performance tips: either do not save and restore REGADDRPTR (if it
+		 *    is safe) or do save/restore operations only in critical sections.
+		u8 tmp = readb(dev->base_addr + REGADDRPTR);
+		 */
+		writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR));
+		writeb(value, net2272_reg_addr(dev, REGDATA));
+		/* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */
+	} else
+		writeb(value, net2272_reg_addr(dev, reg));
+}
+
+static u8
+net2272_read(struct net2272 *dev, unsigned int reg)
+{
+	u8 ret;
+
+	if (reg >= REG_INDEXED_THRESHOLD) {
+		/*
+		 * Indexed register; use REGADDRPTR/REGDATA
+		 *  - Save and restore REGADDRPTR. This prevents REGADDRPTR from
+		 *    changes between other code sections, but it is time consuming.
+		 *  - Performance tips: either do not save and restore REGADDRPTR (if it
+		 *    is safe) or do save/restore operations only in critical sections.
+		u8 tmp = readb(dev->base_addr + REGADDRPTR);
+		 */
+		writeb((u8)reg, net2272_reg_addr(dev, REGADDRPTR));
+		ret = readb(net2272_reg_addr(dev, REGDATA));
+		/* writeb(tmp, net2272_reg_addr(dev, REGADDRPTR)); */
+	} else
+		ret = readb(net2272_reg_addr(dev, reg));
+
+	return ret;
+}
+
+static void
+net2272_ep_write(struct net2272_ep *ep, unsigned int reg, u8 value)
+{
+	struct net2272 *dev = ep->dev;
+
+	if (dev->pagesel != ep->num) {
+		net2272_write(dev, PAGESEL, ep->num);
+		dev->pagesel = ep->num;
+	}
+	net2272_write(dev, reg, value);
+}
+
+static u8
+net2272_ep_read(struct net2272_ep *ep, unsigned int reg)
+{
+	struct net2272 *dev = ep->dev;
+
+	if (dev->pagesel != ep->num) {
+		net2272_write(dev, PAGESEL, ep->num);
+		dev->pagesel = ep->num;
+	}
+	return net2272_read(dev, reg);
+}
+
+static void allow_status(struct net2272_ep *ep)
+{
+	/* ep0 only */
+	net2272_ep_write(ep, EP_RSPCLR,
+		(1 << CONTROL_STATUS_PHASE_HANDSHAKE) |
+		(1 << ALT_NAK_OUT_PACKETS) |
+		(1 << NAK_OUT_PACKETS_MODE));
+	ep->stopped = 1;
+}
+
+static void set_halt(struct net2272_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	net2272_ep_write(ep, EP_RSPCLR, 1 << CONTROL_STATUS_PHASE_HANDSHAKE);
+	net2272_ep_write(ep, EP_RSPSET, 1 << ENDPOINT_HALT);
+}
+
+static void clear_halt(struct net2272_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	net2272_ep_write(ep, EP_RSPCLR,
+		(1 << ENDPOINT_HALT) | (1 << ENDPOINT_TOGGLE));
+}
+
+/* count (<= 4) bytes in the next fifo write will be valid */
+static void set_fifo_bytecount(struct net2272_ep *ep, unsigned count)
+{
+	/* net2272_ep_write will truncate to u8 for us */
+	net2272_ep_write(ep, EP_TRANSFER2, count >> 16);
+	net2272_ep_write(ep, EP_TRANSFER1, count >> 8);
+	net2272_ep_write(ep, EP_TRANSFER0, count);
+}
+
+struct net2272_request {
+	struct usb_request req;
+	struct list_head queue;
+	unsigned mapped:1,
+	         valid:1;
+};
+
+#endif
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 476d88e1ae9..3dd40b4e675 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -1410,11 +1410,17 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on)
 	return 0;
 }
 
+static int net2280_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int net2280_stop(struct usb_gadget_driver *driver);
+
 static const struct usb_gadget_ops net2280_ops = {
 	.get_frame	= net2280_get_frame,
 	.wakeup		= net2280_wakeup,
 	.set_selfpowered = net2280_set_selfpowered,
 	.pullup		= net2280_pullup,
+	.start		= net2280_start,
+	.stop		= net2280_stop,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -1738,62 +1744,6 @@ static void set_fifo_mode (struct net2280 *dev, int mode)
 	list_add_tail (&dev->ep [6].ep.ep_list, &dev->gadget.ep_list);
 }
 
-/* just declare this in any driver that really need it */
-extern int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode);
-
-/**
- * net2280_set_fifo_mode - change allocation of fifo buffers
- * @gadget: access to the net2280 device that will be updated
- * @mode: 0 for default, four 1kB buffers (ep-a through ep-d);
- *	1 for two 2kB buffers (ep-a and ep-b only);
- *	2 for one 2kB buffer (ep-a) and two 1kB ones (ep-b, ep-c).
- *
- * returns zero on success, else negative errno.  when this succeeds,
- * the contents of gadget->ep_list may have changed.
- *
- * you may only call this function when endpoints a-d are all disabled.
- * use it whenever extra hardware buffering can help performance, such
- * as before enabling "high bandwidth" interrupt endpoints that use
- * maxpacket bigger than 512 (when double buffering would otherwise
- * be unavailable).
- */
-int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode)
-{
-	int			i;
-	struct net2280		*dev;
-	int			status = 0;
-	unsigned long		flags;
-
-	if (!gadget)
-		return -ENODEV;
-	dev = container_of (gadget, struct net2280, gadget);
-
-	spin_lock_irqsave (&dev->lock, flags);
-
-	for (i = 1; i <= 4; i++)
-		if (dev->ep [i].desc) {
-			status = -EINVAL;
-			break;
-		}
-	if (mode < 0 || mode > 2)
-		status = -EINVAL;
-	if (status == 0)
-		set_fifo_mode (dev, mode);
-	spin_unlock_irqrestore (&dev->lock, flags);
-
-	if (status == 0) {
-		if (mode == 1)
-			DEBUG (dev, "fifo:  ep-a 2K, ep-b 2K\n");
-		else if (mode == 2)
-			DEBUG (dev, "fifo:  ep-a 2K, ep-b 1K, ep-c 1K\n");
-		/* else all are 1K */
-	}
-	return status;
-}
-EXPORT_SYMBOL (net2280_set_fifo_mode);
-
-/*-------------------------------------------------------------------------*/
-
 /* keeping it simple:
  * - one bus driver, initted first;
  * - one function driver, initted second
@@ -1930,7 +1880,7 @@ static void ep0_start (struct net2280 *dev)
  * disconnect is reported.  then a host may connect again, or
  * the driver might get unbound.
  */
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int net2280_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct net2280		*dev = the_controller;
@@ -1994,7 +1944,6 @@ err_unbind:
 	dev->driver = NULL;
 	return retval;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
 static void
 stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver)
@@ -2022,7 +1971,7 @@ stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver)
 	usb_reinit (dev);
 }
 
-int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
+static int net2280_stop(struct usb_gadget_driver *driver)
 {
 	struct net2280	*dev = the_controller;
 	unsigned long	flags;
@@ -2049,8 +1998,6 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
 	DEBUG (dev, "unregistered driver '%s'\n", driver->driver.name);
 	return 0;
 }
-EXPORT_SYMBOL (usb_gadget_unregister_driver);
-
 
 /*-------------------------------------------------------------------------*/
 
@@ -2732,6 +2679,8 @@ static void net2280_remove (struct pci_dev *pdev)
 {
 	struct net2280		*dev = pci_get_drvdata (pdev);
 
+	usb_del_gadget_udc(&dev->gadget);
+
 	BUG_ON(dev->driver);
 
 	/* then clean up the resources we allocated during probe() */
@@ -2916,6 +2865,9 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 	retval = device_create_file (&pdev->dev, &dev_attr_registers);
 	if (retval) goto done;
 
+	retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
+	if (retval)
+		goto done;
 	return 0;
 
 done:
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index 55ca63ad350..c7fb7723c01 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -241,6 +241,7 @@ static struct usb_composite_driver nokia_driver = {
 	.name		= "g_nokia",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_HIGH,
 	.unbind		= __exit_p(nokia_unbind),
 };
 
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 82fd2493533..740c7daed27 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -1375,6 +1375,10 @@ static int omap_pullup(struct usb_gadget *gadget, int is_on)
 	return 0;
 }
 
+static int omap_udc_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int omap_udc_stop(struct usb_gadget_driver *driver);
+
 static struct usb_gadget_ops omap_gadget_ops = {
 	.get_frame		= omap_get_frame,
 	.wakeup			= omap_wakeup,
@@ -1382,6 +1386,8 @@ static struct usb_gadget_ops omap_gadget_ops = {
 	.vbus_session		= omap_vbus_session,
 	.vbus_draw		= omap_vbus_draw,
 	.pullup			= omap_pullup,
+	.start			= omap_udc_start,
+	.stop			= omap_udc_stop,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -2102,7 +2108,7 @@ static inline int machine_without_vbus_sense(void)
 		);
 }
 
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int omap_udc_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	int		status = -ENODEV;
@@ -2186,9 +2192,8 @@ done:
 		omap_udc_enable_clock(0);
 	return status;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
+static int omap_udc_stop(struct usb_gadget_driver *driver)
 {
 	unsigned long	flags;
 	int		status = -ENODEV;
@@ -2222,8 +2227,6 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
 	DBG("unregistered driver '%s'\n", driver->driver.name);
 	return status;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
-
 
 /*-------------------------------------------------------------------------*/
 
@@ -2991,9 +2994,16 @@ known:
 
 	create_proc_file();
 	status = device_add(&udc->gadget.dev);
+	if (status)
+		goto cleanup4;
+
+	status = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
 	if (!status)
 		return status;
 	/* If fail, fall through */
+cleanup4:
+	remove_proc_file();
+
 #ifdef	USE_ISO
 cleanup3:
 	free_irq(pdev->resource[2].start, udc);
@@ -3029,6 +3039,8 @@ static int __exit omap_udc_remove(struct platform_device *pdev)
 
 	if (!udc)
 		return -ENODEV;
+
+	usb_del_gadget_udc(&udc->gadget);
 	if (udc->driver)
 		return -EBUSY;
 
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
index 68dbcc3e4cc..f96615ab6b7 100644
--- a/drivers/usb/gadget/pch_udc.c
+++ b/drivers/usb/gadget/pch_udc.c
@@ -1176,6 +1176,9 @@ static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA)
 	return -EOPNOTSUPP;
 }
 
+static int pch_udc_start(struct usb_gadget_driver *driver,
+	int (*bind)(struct usb_gadget *));
+static int pch_udc_stop(struct usb_gadget_driver *driver);
 static const struct usb_gadget_ops pch_udc_ops = {
 	.get_frame = pch_udc_pcd_get_frame,
 	.wakeup = pch_udc_pcd_wakeup,
@@ -1183,6 +1186,8 @@ static const struct usb_gadget_ops pch_udc_ops = {
 	.pullup = pch_udc_pcd_pullup,
 	.vbus_session = pch_udc_pcd_vbus_session,
 	.vbus_draw = pch_udc_pcd_vbus_draw,
+	.start	= pch_udc_start,
+	.stop	= pch_udc_stop,
 };
 
 /**
@@ -2690,7 +2695,7 @@ static int init_dma_pools(struct pch_udc_dev *dev)
 	return 0;
 }
 
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int pch_udc_start(struct usb_gadget_driver *driver,
 	int (*bind)(struct usb_gadget *))
 {
 	struct pch_udc_dev	*dev = pch_udc;
@@ -2733,9 +2738,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	dev->connected = 1;
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int pch_udc_stop(struct usb_gadget_driver *driver)
 {
 	struct pch_udc_dev	*dev = pch_udc;
 
@@ -2761,7 +2765,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	pch_udc_set_disconnect(dev);
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
 static void pch_udc_shutdown(struct pci_dev *pdev)
 {
@@ -2778,6 +2781,8 @@ static void pch_udc_remove(struct pci_dev *pdev)
 {
 	struct pch_udc_dev	*dev = pci_get_drvdata(pdev);
 
+	usb_del_gadget_udc(&dev->gadget);
+
 	/* gadget driver must not be registered */
 	if (dev->driver)
 		dev_err(&pdev->dev,
@@ -2953,6 +2958,9 @@ static int pch_udc_probe(struct pci_dev *pdev,
 
 	/* Put the device in disconnected state till a driver is bound */
 	pch_udc_set_disconnect(dev);
+	retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
+	if (retval)
+		goto finished;
 	return 0;
 
 finished:
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 978e6a101bf..a341dde6f9c 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -89,8 +89,7 @@ struct printer_dev {
 	u8			config;
 	s8			interface;
 	struct usb_ep		*in_ep, *out_ep;
-	const struct usb_endpoint_descriptor
-				*in, *out;
+
 	struct list_head	rx_reqs;	/* List of free RX structs */
 	struct list_head	rx_reqs_active;	/* List of Active RX xfers */
 	struct list_head	rx_buffers;	/* List of completed xfers */
@@ -898,19 +897,20 @@ set_printer_interface(struct printer_dev *dev)
 {
 	int			result = 0;
 
-	dev->in = ep_desc(dev->gadget, &hs_ep_in_desc, &fs_ep_in_desc);
+	dev->in_ep->desc = ep_desc(dev->gadget, &hs_ep_in_desc, &fs_ep_in_desc);
 	dev->in_ep->driver_data = dev;
 
-	dev->out = ep_desc(dev->gadget, &hs_ep_out_desc, &fs_ep_out_desc);
+	dev->out_ep->desc = ep_desc(dev->gadget, &hs_ep_out_desc,
+				    &fs_ep_out_desc);
 	dev->out_ep->driver_data = dev;
 
-	result = usb_ep_enable(dev->in_ep, dev->in);
+	result = usb_ep_enable(dev->in_ep);
 	if (result != 0) {
 		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
 		goto done;
 	}
 
-	result = usb_ep_enable(dev->out_ep, dev->out);
+	result = usb_ep_enable(dev->out_ep);
 	if (result != 0) {
 		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
 		goto done;
@@ -921,8 +921,8 @@ done:
 	if (result != 0) {
 		(void) usb_ep_disable(dev->in_ep);
 		(void) usb_ep_disable(dev->out_ep);
-		dev->in = NULL;
-		dev->out = NULL;
+		dev->in_ep->desc = NULL;
+		dev->out_ep->desc = NULL;
 	}
 
 	/* caller is responsible for cleanup on error */
@@ -936,12 +936,14 @@ static void printer_reset_interface(struct printer_dev *dev)
 
 	DBG(dev, "%s\n", __func__);
 
-	if (dev->in)
+	if (dev->in_ep->desc)
 		usb_ep_disable(dev->in_ep);
 
-	if (dev->out)
+	if (dev->out_ep->desc)
 		usb_ep_disable(dev->out_ep);
 
+	dev->in_ep->desc = NULL;
+	dev->out_ep->desc = NULL;
 	dev->interface = -1;
 }
 
@@ -1107,9 +1109,9 @@ static void printer_soft_reset(struct printer_dev *dev)
 		list_add(&req->list, &dev->tx_reqs);
 	}
 
-	if (usb_ep_enable(dev->in_ep, dev->in))
+	if (usb_ep_enable(dev->in_ep))
 		DBG(dev, "Failed to enable USB in_ep\n");
-	if (usb_ep_enable(dev->out_ep, dev->out))
+	if (usb_ep_enable(dev->out_ep))
 		DBG(dev, "Failed to enable USB out_ep\n");
 
 	wake_up_interruptible(&dev->rx_wait);
@@ -1149,6 +1151,8 @@ printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			switch (wValue >> 8) {
 
 			case USB_DT_DEVICE:
+				device_desc.bMaxPacketSize0 =
+					gadget->ep0->maxpacket;
 				value = min(wLength, (u16) sizeof device_desc);
 				memcpy(req->buf, &device_desc, value);
 				break;
@@ -1156,6 +1160,12 @@ printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			case USB_DT_DEVICE_QUALIFIER:
 				if (!gadget->is_dualspeed)
 					break;
+				/*
+				 * assumes ep0 uses the same value for both
+				 * speeds
+				 */
+				dev_qualifier.bMaxPacketSize0 =
+					gadget->ep0->maxpacket;
 				value = min(wLength,
 						(u16) sizeof dev_qualifier);
 				memcpy(req->buf, &dev_qualifier, value);
@@ -1451,15 +1461,11 @@ autoconf_fail:
 	out_ep->driver_data = out_ep;	/* claim */
 
 #ifdef	CONFIG_USB_GADGET_DUALSPEED
-	/* assumes ep0 uses the same value for both speeds ... */
-	dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
-
-	/* and that all endpoints are dual-speed */
+	/* assumes that all endpoints are dual-speed */
 	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
 	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
 #endif	/* DUALSPEED */
 
-	device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
 	usb_gadget_set_selfpowered(gadget);
 
 	if (gadget->is_otg) {
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 774545494cf..e4e59b4de25 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -1011,12 +1011,18 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 	return -EOPNOTSUPP;
 }
 
+static int pxa25x_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int pxa25x_stop(struct usb_gadget_driver *driver);
+
 static const struct usb_gadget_ops pxa25x_udc_ops = {
 	.get_frame	= pxa25x_udc_get_frame,
 	.wakeup		= pxa25x_udc_wakeup,
 	.vbus_session	= pxa25x_udc_vbus_session,
 	.pullup		= pxa25x_udc_pullup,
 	.vbus_draw	= pxa25x_udc_vbus_draw,
+	.start		= pxa25x_start,
+	.stop		= pxa25x_stop,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -1263,7 +1269,7 @@ static void udc_enable (struct pxa25x_udc *dev)
  * disconnect is reported.  then a host may connect again, or
  * the driver might get unbound.
  */
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int pxa25x_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct pxa25x_udc	*dev = the_controller;
@@ -1322,7 +1328,6 @@ fail:
 bind_fail:
 	return retval;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
 static void
 stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver)
@@ -1351,7 +1356,7 @@ stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver)
 	udc_reinit(dev);
 }
 
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int pxa25x_stop(struct usb_gadget_driver *driver)
 {
 	struct pxa25x_udc	*dev = the_controller;
 
@@ -1379,8 +1384,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	dump_state(dev);
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
-
 
 /*-------------------------------------------------------------------------*/
 
@@ -2231,8 +2234,11 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 #endif
 	create_debug_files(dev);
 
-	return 0;
+	retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
+	if (!retval)
+		return retval;
 
+	remove_debug_files(dev);
 #ifdef	CONFIG_ARCH_LUBBOCK
 lubbock_fail0:
 	free_irq(LUBBOCK_USB_DISC_IRQ, dev);
@@ -2261,6 +2267,7 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
 {
 	struct pxa25x_udc *dev = platform_get_drvdata(pdev);
 
+	usb_del_gadget_udc(&dev->gadget);
 	if (dev->driver)
 		return -EBUSY;
 
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 57607696735..85b68c75dc9 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1680,12 +1680,18 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 	return -EOPNOTSUPP;
 }
 
+static int pxa27x_udc_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int pxa27x_udc_stop(struct usb_gadget_driver *driver);
+
 static const struct usb_gadget_ops pxa_udc_ops = {
 	.get_frame	= pxa_udc_get_frame,
 	.wakeup		= pxa_udc_wakeup,
 	.pullup		= pxa_udc_pullup,
 	.vbus_session	= pxa_udc_vbus_session,
 	.vbus_draw	= pxa_udc_vbus_draw,
+	.start		= pxa27x_udc_start,
+	.stop		= pxa27x_udc_stop,
 };
 
 /**
@@ -1791,7 +1797,7 @@ static void udc_enable(struct pxa_udc *udc)
 }
 
 /**
- * usb_gadget_probe_driver - Register gadget driver
+ * pxa27x_start - Register gadget driver
  * @driver: gadget driver
  * @bind: bind function
  *
@@ -1805,7 +1811,7 @@ static void udc_enable(struct pxa_udc *udc)
  *
  * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise
  */
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int pxa27x_udc_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct pxa_udc *udc = the_controller;
@@ -1860,8 +1866,6 @@ add_fail:
 	udc->gadget.dev.driver = NULL;
 	return retval;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
-
 
 /**
  * stop_activity - Stops udc endpoints
@@ -1888,12 +1892,12 @@ static void stop_activity(struct pxa_udc *udc, struct usb_gadget_driver *driver)
 }
 
 /**
- * usb_gadget_unregister_driver - Unregister the gadget driver
+ * pxa27x_udc_stop - Unregister the gadget driver
  * @driver: gadget driver
  *
  * Returns 0 if no error, -ENODEV, -EINVAL otherwise
  */
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int pxa27x_udc_stop(struct usb_gadget_driver *driver)
 {
 	struct pxa_udc *udc = the_controller;
 
@@ -1917,7 +1921,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 		return otg_set_peripheral(udc->transceiver, NULL);
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
 /**
  * handle_ep0_ctrl_req - handle control endpoint control request
@@ -2516,9 +2519,14 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 			driver_name, IRQ_USB, retval);
 		goto err_irq;
 	}
+	retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
+	if (retval)
+		goto err_add_udc;
 
 	pxa_init_debugfs(udc);
 	return 0;
+err_add_udc:
+	free_irq(udc->irq, udc);
 err_irq:
 	iounmap(udc->regs);
 err_map:
@@ -2537,6 +2545,7 @@ static int __exit pxa_udc_remove(struct platform_device *_dev)
 	struct pxa_udc *udc = platform_get_drvdata(_dev);
 	int gpio = udc->mach->gpio_pullup;
 
+	usb_del_gadget_udc(&udc->gadget);
 	usb_gadget_unregister_driver(udc->driver);
 	free_irq(udc->irq, udc);
 	pxa_cleanup_debugfs(udc);
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 6dcc1f68fa6..50991e5bd5e 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2006-2009 Renesas Solutions Corp.
  *
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -576,7 +576,11 @@ static void init_controller(struct r8a66597 *r8a66597)
 	u16 endian = r8a66597->pdata->endian ? BIGEND : 0;
 
 	if (r8a66597->pdata->on_chip) {
-		r8a66597_bset(r8a66597, 0x04, SYSCFG1);
+		if (r8a66597->pdata->buswait)
+			r8a66597_write(r8a66597, r8a66597->pdata->buswait,
+					SYSCFG1);
+		else
+			r8a66597_write(r8a66597, 0x0f, SYSCFG1);
 		r8a66597_bset(r8a66597, HSE, SYSCFG0);
 
 		r8a66597_bclr(r8a66597, USBE, SYSCFG0);
@@ -618,6 +622,7 @@ static void disable_controller(struct r8a66597 *r8a66597)
 {
 	if (r8a66597->pdata->on_chip) {
 		r8a66597_bset(r8a66597, SCKE, SYSCFG0);
+		r8a66597_bclr(r8a66597, UTST, TESTMODE);
 
 		/* disable interrupts */
 		r8a66597_write(r8a66597, 0, INTENB0);
@@ -635,6 +640,7 @@ static void disable_controller(struct r8a66597 *r8a66597)
 		r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
 
 	} else {
+		r8a66597_bclr(r8a66597, UTST, TESTMODE);
 		r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
 		udelay(1);
 		r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
@@ -999,10 +1005,29 @@ static void clear_feature(struct r8a66597 *r8a66597,
 
 static void set_feature(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl)
 {
+	u16 tmp;
+	int timeout = 3000;
 
 	switch (ctrl->bRequestType & USB_RECIP_MASK) {
 	case USB_RECIP_DEVICE:
-		control_end(r8a66597, 1);
+		switch (le16_to_cpu(ctrl->wValue)) {
+		case USB_DEVICE_TEST_MODE:
+			control_end(r8a66597, 1);
+			/* Wait for the completion of status stage */
+			do {
+				tmp = r8a66597_read(r8a66597, INTSTS0) & CTSQ;
+				udelay(1);
+			} while (tmp != CS_IDST || timeout-- > 0);
+
+			if (tmp == CS_IDST)
+				r8a66597_bset(r8a66597,
+					      le16_to_cpu(ctrl->wIndex >> 8),
+					      TESTMODE);
+			break;
+		default:
+			pipe_stall(r8a66597, 0);
+			break;
+		}
 		break;
 	case USB_RECIP_INTERFACE:
 		control_end(r8a66597, 1);
@@ -1410,7 +1435,7 @@ static struct usb_ep_ops r8a66597_ep_ops = {
 /*-------------------------------------------------------------------------*/
 static struct r8a66597 *the_controller;
 
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int r8a66597_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct r8a66597 *r8a66597 = the_controller;
@@ -1444,6 +1469,7 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		goto error;
 	}
 
+	init_controller(r8a66597);
 	r8a66597_bset(r8a66597, VBSE, INTENB0);
 	if (r8a66597_read(r8a66597, INTSTS0) & VBSTS) {
 		r8a66597_start_xclock(r8a66597);
@@ -1462,9 +1488,8 @@ error:
 
 	return retval;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int r8a66597_stop(struct usb_gadget_driver *driver)
 {
 	struct r8a66597 *r8a66597 = the_controller;
 	unsigned long flags;
@@ -1475,20 +1500,16 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 	spin_lock_irqsave(&r8a66597->lock, flags);
 	if (r8a66597->gadget.speed != USB_SPEED_UNKNOWN)
 		r8a66597_usb_disconnect(r8a66597);
-	spin_unlock_irqrestore(&r8a66597->lock, flags);
-
 	r8a66597_bclr(r8a66597, VBSE, INTENB0);
+	disable_controller(r8a66597);
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
 
 	driver->unbind(&r8a66597->gadget);
 
-	init_controller(r8a66597);
-	disable_controller(r8a66597);
-
 	device_del(&r8a66597->gadget.dev);
 	r8a66597->driver = NULL;
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
 /*-------------------------------------------------------------------------*/
 static int r8a66597_get_frame(struct usb_gadget *_gadget)
@@ -1497,14 +1518,33 @@ static int r8a66597_get_frame(struct usb_gadget *_gadget)
 	return r8a66597_read(r8a66597, FRMNUM) & 0x03FF;
 }
 
+static int r8a66597_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct r8a66597 *r8a66597 = gadget_to_r8a66597(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&r8a66597->lock, flags);
+	if (is_on)
+		r8a66597_bset(r8a66597, DPRPU, SYSCFG0);
+	else
+		r8a66597_bclr(r8a66597, DPRPU, SYSCFG0);
+	spin_unlock_irqrestore(&r8a66597->lock, flags);
+
+	return 0;
+}
+
 static struct usb_gadget_ops r8a66597_gadget_ops = {
 	.get_frame		= r8a66597_get_frame,
+	.start			= r8a66597_start,
+	.stop			= r8a66597_stop,
+	.pullup			= r8a66597_pullup,
 };
 
 static int __exit r8a66597_remove(struct platform_device *pdev)
 {
 	struct r8a66597		*r8a66597 = dev_get_drvdata(&pdev->dev);
 
+	usb_del_gadget_udc(&r8a66597->gadget);
 	del_timer_sync(&r8a66597->timer);
 	iounmap(r8a66597->reg);
 	free_irq(platform_get_irq(pdev, 0), r8a66597);
@@ -1645,11 +1685,15 @@ static int __init r8a66597_probe(struct platform_device *pdev)
 		goto clean_up3;
 	r8a66597->ep0_req->complete = nop_completion;
 
-	init_controller(r8a66597);
+	ret = usb_add_gadget_udc(&pdev->dev, &r8a66597->gadget);
+	if (ret)
+		goto err_add_udc;
 
 	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
 	return 0;
 
+err_add_udc:
+	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
 clean_up3:
 	free_irq(irq, r8a66597);
 clean_up2:
@@ -1679,6 +1723,7 @@ static struct platform_driver r8a66597_driver = {
 		.name =	(char *) udc_name,
 	},
 };
+MODULE_ALIAS("platform:r8a66597_udc");
 
 static int __init r8a66597_udc_init(void)
 {
diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/r8a66597-udc.h
index 5fc22e09a0f..503f766c23a 100644
--- a/drivers/usb/gadget/r8a66597-udc.h
+++ b/drivers/usb/gadget/r8a66597-udc.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2007-2009 Renesas Solutions Corp.
  *
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 0dfee282878..8bdee67ce09 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2574,7 +2574,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
 	return 0;
 }
 
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int s3c_hsotg_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct s3c_hsotg *hsotg = our_hsotg;
@@ -2745,9 +2745,8 @@ err:
 	hsotg->gadget.dev.driver = NULL;
 	return ret;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int s3c_hsotg_stop(struct usb_gadget_driver *driver)
 {
 	struct s3c_hsotg *hsotg = our_hsotg;
 	int ep;
@@ -2775,7 +2774,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
 static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
 {
@@ -2784,6 +2782,8 @@ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget)
 
 static struct usb_gadget_ops s3c_hsotg_gadget_ops = {
 	.get_frame	= s3c_hsotg_gadget_getframe,
+	.start		= s3c_hsotg_start,
+	.stop		= s3c_hsotg_stop,
 };
 
 /**
@@ -3403,6 +3403,10 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 	for (epnum = 0; epnum < S3C_HSOTG_EPS; epnum++)
 		s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum);
 
+	ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget);
+	if (ret)
+		goto err_add_udc;
+
 	s3c_hsotg_create_debug(hsotg);
 
 	s3c_hsotg_dump(hsotg);
@@ -3410,6 +3414,11 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
 	our_hsotg = hsotg;
 	return 0;
 
+err_add_udc:
+	s3c_hsotg_gate(pdev, false);
+	clk_disable(hsotg->clk);
+	clk_put(hsotg->clk);
+
 err_regs:
 	iounmap(hsotg->regs);
 
@@ -3427,6 +3436,8 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev)
 {
 	struct s3c_hsotg *hsotg = platform_get_drvdata(pdev);
 
+	usb_del_gadget_udc(&hsotg->gadget);
+
 	s3c_hsotg_delete_debug(hsotg);
 
 	usb_gadget_unregister_driver(hsotg->driver);
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index d5e3e1e5862..3fa717c5f4b 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -1133,7 +1133,7 @@ static irqreturn_t s3c_hsudc_irq(int irq, void *_dev)
 	return IRQ_HANDLED;
 }
 
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int s3c_hsudc_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct s3c_hsudc *hsudc = the_controller;
@@ -1181,9 +1181,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int s3c_hsudc_stop(struct usb_gadget_driver *driver)
 {
 	struct s3c_hsudc *hsudc = the_controller;
 	unsigned long flags;
@@ -1210,7 +1209,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 			driver->driver.name);
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
 static inline u32 s3c_hsudc_read_frameno(struct s3c_hsudc *hsudc)
 {
@@ -1224,6 +1222,8 @@ static int s3c_hsudc_gadget_getframe(struct usb_gadget *gadget)
 
 static struct usb_gadget_ops s3c_hsudc_gadget_ops = {
 	.get_frame	= s3c_hsudc_gadget_getframe,
+	.start		= s3c_hsudc_start,
+	.stop		= s3c_hsudc_stop,
 };
 
 static int s3c_hsudc_probe(struct platform_device *pdev)
@@ -1311,7 +1311,15 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 
 	disable_irq(hsudc->irq);
 	local_irq_enable();
+
+	ret = usb_add_gadget_udc(&pdev->dev, &hsudc->gadget);
+	if (ret)
+		goto err_add_udc;
+
 	return 0;
+err_add_udc:
+	clk_disable(hsudc->uclk);
+	clk_put(hsudc->uclk);
 err_clk:
 	free_irq(hsudc->irq, hsudc);
 err_irq:
@@ -1333,6 +1341,7 @@ static struct platform_driver s3c_hsudc_driver = {
 	},
 	.probe		= s3c_hsudc_probe,
 };
+MODULE_ALIAS("platform:s3c-hsudc");
 
 static int __init s3c_hsudc_modinit(void)
 {
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 100f2635cf0..85c1b0d6629 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1552,6 +1552,10 @@ static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
 	return -ENOTSUPP;
 }
 
+static int s3c2410_udc_start(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *));
+static int s3c2410_udc_stop(struct usb_gadget_driver *driver);
+
 static const struct usb_gadget_ops s3c2410_ops = {
 	.get_frame		= s3c2410_udc_get_frame,
 	.wakeup			= s3c2410_udc_wakeup,
@@ -1559,6 +1563,8 @@ static const struct usb_gadget_ops s3c2410_ops = {
 	.pullup			= s3c2410_udc_pullup,
 	.vbus_session		= s3c2410_udc_vbus_session,
 	.vbus_draw		= s3c2410_vbus_draw,
+	.start			= s3c2410_udc_start,
+	.stop			= s3c2410_udc_stop,
 };
 
 static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd)
@@ -1567,7 +1573,7 @@ static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd)
 		return;
 
 	if (udc_info->udc_command) {
-		udc_info->udc_command(S3C2410_UDC_P_DISABLE);
+		udc_info->udc_command(cmd);
 	} else if (gpio_is_valid(udc_info->pullup_pin)) {
 		int value;
 
@@ -1672,10 +1678,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev)
 	s3c2410_udc_command(S3C2410_UDC_P_ENABLE);
 }
 
-/*
- *	usb_gadget_probe_driver
- */
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int s3c2410_udc_start(struct usb_gadget_driver *driver,
 		int (*bind)(struct usb_gadget *))
 {
 	struct s3c2410_udc *udc = the_controller;
@@ -1730,12 +1733,8 @@ register_error:
 	udc->gadget.dev.driver = NULL;
 	return retval;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-/*
- *	usb_gadget_unregister_driver
- */
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int s3c2410_udc_stop(struct usb_gadget_driver *driver)
 {
 	struct s3c2410_udc *udc = the_controller;
 
@@ -1955,6 +1954,10 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 			goto err_vbus_irq;
 	}
 
+	retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
+	if (retval)
+		goto err_add_udc;
+
 	if (s3c2410_udc_debugfs_root) {
 		udc->regs_info = debugfs_create_file("registers", S_IRUGO,
 				s3c2410_udc_debugfs_root,
@@ -1967,6 +1970,10 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_add_udc:
+	if (udc_info && !udc_info->udc_command &&
+			gpio_is_valid(udc_info->pullup_pin))
+		gpio_free(udc_info->pullup_pin);
 err_vbus_irq:
 	if (udc_info && udc_info->vbus_pin > 0)
 		free_irq(gpio_to_irq(udc_info->vbus_pin), udc);
@@ -1992,6 +1999,8 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
 	unsigned int irq;
 
 	dev_dbg(&pdev->dev, "%s()\n", __func__);
+
+	usb_del_gadget_udc(&udc->gadget);
 	if (udc->driver)
 		return -EBUSY;
 
@@ -2048,26 +2057,22 @@ static int s3c2410_udc_resume(struct platform_device *pdev)
 #define s3c2410_udc_resume	NULL
 #endif
 
-static struct platform_driver udc_driver_2410 = {
-	.driver		= {
-		.name	= "s3c2410-usbgadget",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= s3c2410_udc_probe,
-	.remove		= s3c2410_udc_remove,
-	.suspend	= s3c2410_udc_suspend,
-	.resume		= s3c2410_udc_resume,
+static const struct platform_device_id s3c_udc_ids[] = {
+	{ "s3c2410-usbgadget", },
+	{ "s3c2440-usbgadget", },
 };
+MODULE_DEVICE_TABLE(platform, s3c_udc_ids);
 
-static struct platform_driver udc_driver_2440 = {
+static struct platform_driver udc_driver_24x0 = {
 	.driver		= {
-		.name	= "s3c2440-usbgadget",
+		.name	= "s3c24x0-usbgadget",
 		.owner	= THIS_MODULE,
 	},
 	.probe		= s3c2410_udc_probe,
 	.remove		= s3c2410_udc_remove,
 	.suspend	= s3c2410_udc_suspend,
 	.resume		= s3c2410_udc_resume,
+	.id_table	= s3c_udc_ids,
 };
 
 static int __init udc_init(void)
@@ -2083,11 +2088,7 @@ static int __init udc_init(void)
 		s3c2410_udc_debugfs_root = NULL;
 	}
 
-	retval = platform_driver_register(&udc_driver_2410);
-	if (retval)
-		goto err;
-
-	retval = platform_driver_register(&udc_driver_2440);
+	retval = platform_driver_register(&udc_driver_24x0);
 	if (retval)
 		goto err;
 
@@ -2100,13 +2101,10 @@ err:
 
 static void __exit udc_exit(void)
 {
-	platform_driver_unregister(&udc_driver_2410);
-	platform_driver_unregister(&udc_driver_2440);
+	platform_driver_unregister(&udc_driver_24x0);
 	debugfs_remove(s3c2410_udc_debugfs_root);
 }
 
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
-
 module_init(udc_init);
 module_exit(udc_exit);
 
@@ -2114,5 +2112,3 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s3c2410-usbgadget");
-MODULE_ALIAS("platform:s3c2440-usbgadget");
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 1ac57a973aa..ed1b816e58d 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -242,6 +242,7 @@ static struct usb_composite_driver gserial_driver = {
 	.name		= "g_serial",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_HIGH,
 };
 
 static int __init init(void)
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 1fa4f705b0b..d3dd227a2bf 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -494,7 +494,7 @@ static struct usb_descriptor_header *fsg_hs_function[] = {
 };
 
 /* Maxpacket and other transfer characteristics vary by speed. */
-static struct usb_endpoint_descriptor *
+static __maybe_unused struct usb_endpoint_descriptor *
 fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs,
 		struct usb_endpoint_descriptor *hs)
 {
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 2ac1d214732..dfed4c1d96c 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -97,16 +97,17 @@ struct eth_dev {
 
 static unsigned qmult = 5;
 module_param(qmult, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(qmult, "queue length multiplier at high speed");
+MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed");
 
 #else	/* full speed (low speed doesn't do bulk) */
 #define qmult		1
 #endif
 
-/* for dual-speed hardware, use deeper queues at highspeed */
+/* for dual-speed hardware, use deeper queues at high/super speed */
 static inline int qlen(struct usb_gadget *gadget)
 {
-	if (gadget_is_dualspeed(gadget) && gadget->speed == USB_SPEED_HIGH)
+	if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH ||
+					    gadget->speed == USB_SPEED_SUPER))
 		return qmult * DEFAULT_QLEN;
 	else
 		return DEFAULT_QLEN;
@@ -598,9 +599,10 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 
 	req->length = length;
 
-	/* throttle highspeed IRQ rate back slightly */
+	/* throttle high/super speed IRQ rate back slightly */
 	if (gadget_is_dualspeed(dev->gadget))
-		req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
+		req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH ||
+				     dev->gadget->speed == USB_SPEED_SUPER)
 			? ((atomic_read(&dev->tx_qlen) % qmult) != 0)
 			: 0;
 
@@ -693,8 +695,8 @@ static int eth_stop(struct net_device *net)
 		usb_ep_disable(link->out_ep);
 		if (netif_carrier_ok(net)) {
 			DBG(dev, "host still using in/out endpoints\n");
-			usb_ep_enable(link->in_ep, link->in);
-			usb_ep_enable(link->out_ep, link->out);
+			usb_ep_enable(link->in_ep);
+			usb_ep_enable(link->out_ep);
 		}
 	}
 	spin_unlock_irqrestore(&dev->lock, flags);
@@ -871,7 +873,7 @@ struct net_device *gether_connect(struct gether *link)
 		return ERR_PTR(-EINVAL);
 
 	link->in_ep->driver_data = dev;
-	result = usb_ep_enable(link->in_ep, link->in);
+	result = usb_ep_enable(link->in_ep);
 	if (result != 0) {
 		DBG(dev, "enable %s --> %d\n",
 			link->in_ep->name, result);
@@ -879,7 +881,7 @@ struct net_device *gether_connect(struct gether *link)
 	}
 
 	link->out_ep->driver_data = dev;
-	result = usb_ep_enable(link->out_ep, link->out);
+	result = usb_ep_enable(link->out_ep);
 	if (result != 0) {
 		DBG(dev, "enable %s --> %d\n",
 			link->out_ep->name, result);
@@ -969,7 +971,7 @@ void gether_disconnect(struct gether *link)
 	}
 	spin_unlock(&dev->req_lock);
 	link->in_ep->driver_data = NULL;
-	link->in = NULL;
+	link->in_ep->desc = NULL;
 
 	usb_ep_disable(link->out_ep);
 	spin_lock(&dev->req_lock);
@@ -984,7 +986,7 @@ void gether_disconnect(struct gether *link)
 	}
 	spin_unlock(&dev->req_lock);
 	link->out_ep->driver_data = NULL;
-	link->out = NULL;
+	link->out_ep->desc = NULL;
 
 	/* finish forgetting about this USB link episode */
 	dev->header_len = 0;
diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h
index b56e1e7d423..c966440ddd7 100644
--- a/drivers/usb/gadget/u_ether.h
+++ b/drivers/usb/gadget/u_ether.h
@@ -52,10 +52,6 @@ struct gether {
 	struct usb_ep			*in_ep;
 	struct usb_ep			*out_ep;
 
-	/* descriptors match device speed at gether_connect() time */
-	struct usb_endpoint_descriptor	*in;
-	struct usb_endpoint_descriptor	*out;
-
 	bool				is_zlp_ok;
 
 	u16				cdc_filter;
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 40f7716b31f..a8aa46962d8 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -1247,12 +1247,12 @@ int gserial_connect(struct gserial *gser, u8 port_num)
 	port = ports[port_num].port;
 
 	/* activate the endpoints */
-	status = usb_ep_enable(gser->in, gser->in_desc);
+	status = usb_ep_enable(gser->in);
 	if (status < 0)
 		return status;
 	gser->in->driver_data = port;
 
-	status = usb_ep_enable(gser->out, gser->out_desc);
+	status = usb_ep_enable(gser->out);
 	if (status < 0)
 		goto fail_out;
 	gser->out->driver_data = port;
diff --git a/drivers/usb/gadget/u_serial.h b/drivers/usb/gadget/u_serial.h
index 300f0ed9475..9b0fe6450fb 100644
--- a/drivers/usb/gadget/u_serial.h
+++ b/drivers/usb/gadget/u_serial.h
@@ -35,8 +35,6 @@ struct gserial {
 
 	struct usb_ep			*in;
 	struct usb_ep			*out;
-	struct usb_endpoint_descriptor	*in_desc;
-	struct usb_endpoint_descriptor	*out_desc;
 
 	/* REVISIT avoid this CDC-ACM support harder ... */
 	struct usb_cdc_line_coding port_line_coding;	/* 9600-8-N-1 etc */
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
new file mode 100644
index 00000000000..05ba4721436
--- /dev/null
+++ b/drivers/usb/gadget/udc-core.c
@@ -0,0 +1,484 @@
+/**
+ * udc.c - Core UDC Framework
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/err.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/**
+ * struct usb_udc - describes one usb device controller
+ * @driver - the gadget driver pointer. For use by the class code
+ * @dev - the child device to the actual controller
+ * @gadget - the gadget. For use by the class code
+ * @list - for use by the udc class driver
+ *
+ * This represents the internal data structure which is used by the UDC-class
+ * to hold information about udc driver and gadget together.
+ */
+struct usb_udc {
+	struct usb_gadget_driver	*driver;
+	struct usb_gadget		*gadget;
+	struct device			dev;
+	struct list_head		list;
+};
+
+static struct class *udc_class;
+static LIST_HEAD(udc_list);
+static DEFINE_MUTEX(udc_lock);
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * usb_gadget_start - tells usb device controller to start up
+ * @gadget: The gadget we want to get started
+ * @driver: The driver we want to bind to @gadget
+ * @bind: The bind function for @driver
+ *
+ * This call is issued by the UDC Class driver when it's about
+ * to register a gadget driver to the device controller, before
+ * calling gadget driver's bind() method.
+ *
+ * It allows the controller to be powered off until strictly
+ * necessary to have it powered on.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *))
+{
+	return gadget->ops->start(driver, bind);
+}
+
+/**
+ * usb_gadget_udc_start - tells usb device controller to start up
+ * @gadget: The gadget we want to get started
+ * @driver: The driver we want to bind to @gadget
+ *
+ * This call is issued by the UDC Class driver when it's about
+ * to register a gadget driver to the device controller, before
+ * calling gadget driver's bind() method.
+ *
+ * It allows the controller to be powered off until strictly
+ * necessary to have it powered on.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_udc_start(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	return gadget->ops->udc_start(gadget, driver);
+}
+
+/**
+ * usb_gadget_stop - tells usb device controller we don't need it anymore
+ * @gadget: The device we want to stop activity
+ * @driver: The driver to unbind from @gadget
+ *
+ * This call is issued by the UDC Class driver after calling
+ * gadget driver's unbind() method.
+ *
+ * The details are implementation specific, but it can go as
+ * far as powering off UDC completely and disable its data
+ * line pullups.
+ */
+static inline void usb_gadget_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	gadget->ops->stop(driver);
+}
+
+/**
+ * usb_gadget_udc_stop - tells usb device controller we don't need it anymore
+ * @gadget: The device we want to stop activity
+ * @driver: The driver to unbind from @gadget
+ *
+ * This call is issued by the UDC Class driver after calling
+ * gadget driver's unbind() method.
+ *
+ * The details are implementation specific, but it can go as
+ * far as powering off UDC completely and disable its data
+ * line pullups.
+ */
+static inline void usb_gadget_udc_stop(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	gadget->ops->udc_stop(gadget, driver);
+}
+
+/**
+ * usb_udc_release - release the usb_udc struct
+ * @dev: the dev member within usb_udc
+ *
+ * This is called by driver's core in order to free memory once the last
+ * reference is released.
+ */
+static void usb_udc_release(struct device *dev)
+{
+	struct usb_udc *udc;
+
+	udc = container_of(dev, struct usb_udc, dev);
+	dev_dbg(dev, "releasing '%s'\n", dev_name(dev));
+	kfree(udc);
+}
+
+static const struct attribute_group *usb_udc_attr_groups[];
+/**
+ * usb_add_gadget_udc - adds a new gadget to the udc class driver list
+ * @parent: the parent device to this udc. Usually the controller
+ * driver's device.
+ * @gadget: the gadget to be added to the list
+ *
+ * Returns zero on success, negative errno otherwise.
+ */
+int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget)
+{
+	struct usb_udc		*udc;
+	int			ret = -ENOMEM;
+
+	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		goto err1;
+
+	device_initialize(&udc->dev);
+	udc->dev.release = usb_udc_release;
+	udc->dev.class = udc_class;
+	udc->dev.groups = usb_udc_attr_groups;
+	udc->dev.parent = parent;
+	ret = dev_set_name(&udc->dev, "%s", kobject_name(&parent->kobj));
+	if (ret)
+		goto err2;
+
+	udc->gadget = gadget;
+
+	mutex_lock(&udc_lock);
+	list_add_tail(&udc->list, &udc_list);
+
+	ret = device_add(&udc->dev);
+	if (ret)
+		goto err3;
+
+	mutex_unlock(&udc_lock);
+
+	return 0;
+err3:
+	list_del(&udc->list);
+	mutex_unlock(&udc_lock);
+
+err2:
+	put_device(&udc->dev);
+
+err1:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_add_gadget_udc);
+
+static int udc_is_newstyle(struct usb_udc *udc)
+{
+	if (udc->gadget->ops->udc_start && udc->gadget->ops->udc_stop)
+		return 1;
+	return 0;
+}
+
+
+static void usb_gadget_remove_driver(struct usb_udc *udc)
+{
+	dev_dbg(&udc->dev, "unregistering UDC driver [%s]\n",
+			udc->gadget->name);
+
+	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
+
+	if (udc_is_newstyle(udc)) {
+		usb_gadget_disconnect(udc->gadget);
+		udc->driver->unbind(udc->gadget);
+		usb_gadget_udc_stop(udc->gadget, udc->driver);
+
+	} else {
+		usb_gadget_stop(udc->gadget, udc->driver);
+	}
+
+	udc->driver = NULL;
+	udc->dev.driver = NULL;
+}
+
+/**
+ * usb_del_gadget_udc - deletes @udc from udc_list
+ * @gadget: the gadget to be removed.
+ *
+ * This, will call usb_gadget_unregister_driver() if
+ * the @udc is still busy.
+ */
+void usb_del_gadget_udc(struct usb_gadget *gadget)
+{
+	struct usb_udc		*udc = NULL;
+
+	mutex_lock(&udc_lock);
+	list_for_each_entry(udc, &udc_list, list)
+		if (udc->gadget == gadget)
+			goto found;
+
+	dev_err(gadget->dev.parent, "gadget not registered.\n");
+	mutex_unlock(&udc_lock);
+
+	return;
+
+found:
+	dev_vdbg(gadget->dev.parent, "unregistering gadget\n");
+
+	list_del(&udc->list);
+	mutex_unlock(&udc_lock);
+
+	if (udc->driver)
+		usb_gadget_remove_driver(udc);
+
+	kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE);
+	device_unregister(&udc->dev);
+}
+EXPORT_SYMBOL_GPL(usb_del_gadget_udc);
+
+/* ------------------------------------------------------------------------- */
+
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *))
+{
+	struct usb_udc		*udc = NULL;
+	int			ret;
+
+	if (!driver || !bind || !driver->setup)
+		return -EINVAL;
+
+	mutex_lock(&udc_lock);
+	list_for_each_entry(udc, &udc_list, list) {
+		/* For now we take the first one */
+		if (!udc->driver)
+			goto found;
+	}
+
+	pr_debug("couldn't find an available UDC\n");
+	mutex_unlock(&udc_lock);
+	return -ENODEV;
+
+found:
+	dev_dbg(&udc->dev, "registering UDC driver [%s]\n",
+			driver->function);
+
+	udc->driver = driver;
+	udc->dev.driver = &driver->driver;
+
+	if (udc_is_newstyle(udc)) {
+		ret = bind(udc->gadget);
+		if (ret)
+			goto err1;
+		ret = usb_gadget_udc_start(udc->gadget, driver);
+		if (ret) {
+			driver->unbind(udc->gadget);
+			goto err1;
+		}
+		usb_gadget_connect(udc->gadget);
+	} else {
+
+		ret = usb_gadget_start(udc->gadget, driver, bind);
+		if (ret)
+			goto err1;
+
+	}
+
+	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
+	mutex_unlock(&udc_lock);
+	return 0;
+
+err1:
+	dev_err(&udc->dev, "failed to start %s: %d\n",
+			udc->driver->function, ret);
+	udc->driver = NULL;
+	udc->dev.driver = NULL;
+	mutex_unlock(&udc_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_probe_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct usb_udc		*udc = NULL;
+	int			ret = -ENODEV;
+
+	if (!driver || !driver->unbind)
+		return -EINVAL;
+
+	mutex_lock(&udc_lock);
+	list_for_each_entry(udc, &udc_list, list)
+		if (udc->driver == driver) {
+			usb_gadget_remove_driver(udc);
+			ret = 0;
+			break;
+		}
+
+	mutex_unlock(&udc_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_unregister_driver);
+
+/* ------------------------------------------------------------------------- */
+
+static ssize_t usb_udc_srp_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t n)
+{
+	struct usb_udc		*udc = dev_get_drvdata(dev);
+
+	if (sysfs_streq(buf, "1"))
+		usb_gadget_wakeup(udc->gadget);
+
+	return n;
+}
+static DEVICE_ATTR(srp, S_IWUSR, NULL, usb_udc_srp_store);
+
+static ssize_t usb_udc_softconn_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t n)
+{
+	struct usb_udc		*udc = dev_get_drvdata(dev);
+
+	if (sysfs_streq(buf, "connect")) {
+		usb_gadget_connect(udc->gadget);
+	} else if (sysfs_streq(buf, "disconnect")) {
+		usb_gadget_disconnect(udc->gadget);
+	} else {
+		dev_err(dev, "unsupported command '%s'\n", buf);
+		return -EINVAL;
+	}
+
+	return n;
+}
+static DEVICE_ATTR(soft_connect, S_IWUSR, NULL, usb_udc_softconn_store);
+
+static ssize_t usb_udc_speed_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+	struct usb_gadget	*gadget = udc->gadget;
+
+	switch (gadget->speed) {
+	case USB_SPEED_LOW:
+		return snprintf(buf, PAGE_SIZE, "low-speed\n");
+	case USB_SPEED_FULL:
+		return snprintf(buf, PAGE_SIZE, "full-speed\n");
+	case USB_SPEED_HIGH:
+		return snprintf(buf, PAGE_SIZE, "high-speed\n");
+	case USB_SPEED_WIRELESS:
+		return snprintf(buf, PAGE_SIZE, "wireless\n");
+	case USB_SPEED_SUPER:
+		return snprintf(buf, PAGE_SIZE, "super-speed\n");
+	case USB_SPEED_UNKNOWN:	/* FALLTHROUGH */
+	default:
+		return snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
+	}
+}
+static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL);
+
+#define USB_UDC_ATTR(name)					\
+ssize_t usb_udc_##name##_show(struct device *dev,		\
+		struct device_attribute *attr, char *buf)	\
+{								\
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev); \
+	struct usb_gadget	*gadget = udc->gadget;		\
+								\
+	return snprintf(buf, PAGE_SIZE, "%d\n", gadget->name);	\
+}								\
+static DEVICE_ATTR(name, S_IRUSR, usb_udc_##name##_show, NULL)
+
+static USB_UDC_ATTR(is_dualspeed);
+static USB_UDC_ATTR(is_otg);
+static USB_UDC_ATTR(is_a_peripheral);
+static USB_UDC_ATTR(b_hnp_enable);
+static USB_UDC_ATTR(a_hnp_support);
+static USB_UDC_ATTR(a_alt_hnp_support);
+
+static struct attribute *usb_udc_attrs[] = {
+	&dev_attr_srp.attr,
+	&dev_attr_soft_connect.attr,
+	&dev_attr_speed.attr,
+
+	&dev_attr_is_dualspeed.attr,
+	&dev_attr_is_otg.attr,
+	&dev_attr_is_a_peripheral.attr,
+	&dev_attr_b_hnp_enable.attr,
+	&dev_attr_a_hnp_support.attr,
+	&dev_attr_a_alt_hnp_support.attr,
+	NULL,
+};
+
+static const struct attribute_group usb_udc_attr_group = {
+	.attrs = usb_udc_attrs,
+};
+
+static const struct attribute_group *usb_udc_attr_groups[] = {
+	&usb_udc_attr_group,
+	NULL,
+};
+
+static int usb_udc_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+	int			ret;
+
+	ret = add_uevent_var(env, "USB_UDC_NAME=%s", udc->gadget->name);
+	if (ret) {
+		dev_err(dev, "failed to add uevent USB_UDC_NAME\n");
+		return ret;
+	}
+
+	if (udc->driver) {
+		ret = add_uevent_var(env, "USB_UDC_DRIVER=%s",
+				udc->driver->function);
+		if (ret) {
+			dev_err(dev, "failed to add uevent USB_UDC_DRIVER\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int __init usb_udc_init(void)
+{
+	udc_class = class_create(THIS_MODULE, "udc");
+	if (IS_ERR(udc_class)) {
+		pr_err("failed to create udc class --> %ld\n",
+				PTR_ERR(udc_class));
+		return PTR_ERR(udc_class);
+	}
+
+	udc_class->dev_uevent = usb_udc_uevent;
+	return 0;
+}
+subsys_initcall(usb_udc_init);
+
+static void __exit usb_udc_exit(void)
+{
+	class_destroy(udc_class);
+}
+module_exit(usb_udc_exit);
+
+MODULE_DESCRIPTION("UDC Framework");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
index a5a0fdb808c..df6882de50b 100644
--- a/drivers/usb/gadget/webcam.c
+++ b/drivers/usb/gadget/webcam.c
@@ -373,6 +373,7 @@ static struct usb_composite_driver webcam_driver = {
 	.name		= "g_webcam",
 	.dev		= &webcam_device_descriptor,
 	.strings	= webcam_device_strings,
+	.max_speed	= USB_SPEED_HIGH,
 	.unbind		= webcam_unbind,
 };
 
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 6d16db9d9d2..00e2fd2d479 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -340,6 +340,7 @@ static struct usb_composite_driver zero_driver = {
 	.name		= "zero",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
+	.max_speed	= USB_SPEED_SUPER,
 	.unbind		= zero_unbind,
 	.suspend	= zero_suspend,
 	.resume		= zero_resume,
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index f8030ee928e..f72ae0b6ee7 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -94,7 +94,8 @@ static const char	hcd_name [] = "ehci_hcd";
 #define EHCI_IAA_MSECS		10		/* arbitrary */
 #define EHCI_IO_JIFFIES		(HZ/10)		/* io watchdog > irq_thresh */
 #define EHCI_ASYNC_JIFFIES	(HZ/20)		/* async idle timeout */
-#define EHCI_SHRINK_FRAMES	5		/* async qh unlink delay */
+#define EHCI_SHRINK_JIFFIES	(DIV_ROUND_UP(HZ, 200) + 1)
+						/* 200-ms async qh unlink delay */
 
 /* Initial IRQ latency:  faster than hw default */
 static int log2_irq_thresh = 0;		// 0 to 6
@@ -114,7 +115,7 @@ MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
 /* for link power management(LPM) feature */
 static unsigned int hird;
 module_param(hird, int, S_IRUGO);
-MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us\n");
+MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us");
 
 #define	INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
 
@@ -152,10 +153,7 @@ timer_action(struct ehci_hcd *ehci, enum ehci_timer_action action)
 			break;
 		/* case TIMER_ASYNC_SHRINK: */
 		default:
-			/* add a jiffie since we synch against the
-			 * 8 KHz uframe counter.
-			 */
-			t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
+			t = EHCI_SHRINK_JIFFIES;
 			break;
 		}
 		mod_timer(&ehci->watchdog, t + jiffies);
@@ -340,6 +338,7 @@ static void ehci_work(struct ehci_hcd *ehci);
 #include "ehci-mem.c"
 #include "ehci-q.c"
 #include "ehci-sched.c"
+#include "ehci-sysfs.c"
 
 /*-------------------------------------------------------------------------*/
 
@@ -524,7 +523,7 @@ static void ehci_stop (struct usb_hcd *hcd)
 	ehci_reset (ehci);
 	spin_unlock_irq(&ehci->lock);
 
-	remove_companion_file(ehci);
+	remove_sysfs_files(ehci);
 	remove_debug_files (ehci);
 
 	/* root hub is shut down separately (first, when possible) */
@@ -575,6 +574,12 @@ static int ehci_init(struct usb_hcd *hcd)
 	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
 
 	/*
+	 * by default set standard 80% (== 100 usec/uframe) max periodic
+	 * bandwidth as required by USB 2.0
+	 */
+	ehci->uframe_periodic_max = 100;
+
+	/*
 	 * hw default: 1K periodic list heads, one per frame.
 	 * periodic_size can shrink by USBCMD update if hcc_params allows.
 	 */
@@ -758,7 +763,7 @@ static int ehci_run (struct usb_hcd *hcd)
 	 * since the class device isn't created that early.
 	 */
 	create_debug_files(ehci);
-	create_companion_file(ehci);
+	create_sysfs_files(ehci);
 
 	return 0;
 }
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index ea6184bf48d..bf2c8f65e1a 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -471,29 +471,6 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 
 /*-------------------------------------------------------------------------*/
 
-/* Display the ports dedicated to the companion controller */
-static ssize_t show_companion(struct device *dev,
-			      struct device_attribute *attr,
-			      char *buf)
-{
-	struct ehci_hcd		*ehci;
-	int			nports, index, n;
-	int			count = PAGE_SIZE;
-	char			*ptr = buf;
-
-	ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
-	nports = HCS_N_PORTS(ehci->hcs_params);
-
-	for (index = 0; index < nports; ++index) {
-		if (test_bit(index, &ehci->companion_ports)) {
-			n = scnprintf(ptr, count, "%d\n", index + 1);
-			ptr += n;
-			count -= n;
-		}
-	}
-	return ptr - buf;
-}
-
 /*
  * Sets the owner of a port
  */
@@ -528,58 +505,6 @@ static void set_owner(struct ehci_hcd *ehci, int portnum, int new_owner)
 	}
 }
 
-/*
- * Dedicate or undedicate a port to the companion controller.
- * Syntax is "[-]portnum", where a leading '-' sign means
- * return control of the port to the EHCI controller.
- */
-static ssize_t store_companion(struct device *dev,
-			       struct device_attribute *attr,
-			       const char *buf, size_t count)
-{
-	struct ehci_hcd		*ehci;
-	int			portnum, new_owner;
-
-	ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
-	new_owner = PORT_OWNER;		/* Owned by companion */
-	if (sscanf(buf, "%d", &portnum) != 1)
-		return -EINVAL;
-	if (portnum < 0) {
-		portnum = - portnum;
-		new_owner = 0;		/* Owned by EHCI */
-	}
-	if (portnum <= 0 || portnum > HCS_N_PORTS(ehci->hcs_params))
-		return -ENOENT;
-	portnum--;
-	if (new_owner)
-		set_bit(portnum, &ehci->companion_ports);
-	else
-		clear_bit(portnum, &ehci->companion_ports);
-	set_owner(ehci, portnum, new_owner);
-	return count;
-}
-static DEVICE_ATTR(companion, 0644, show_companion, store_companion);
-
-static inline int create_companion_file(struct ehci_hcd *ehci)
-{
-	int	i = 0;
-
-	/* with integrated TT there is no companion! */
-	if (!ehci_is_TDI(ehci))
-		i = device_create_file(ehci_to_hcd(ehci)->self.controller,
-				       &dev_attr_companion);
-	return i;
-}
-
-static inline void remove_companion_file(struct ehci_hcd *ehci)
-{
-	/* with integrated TT there is no companion! */
-	if (!ehci_is_TDI(ehci))
-		device_remove_file(ehci_to_hcd(ehci)->self.controller,
-				   &dev_attr_companion);
-}
-
-
 /*-------------------------------------------------------------------------*/
 
 static int check_reset_complete (
@@ -891,10 +816,11 @@ static int ehci_hub_control (
 			 * power switching; they're allowed to just limit the
 			 * current.  khubd will turn the power back on.
 			 */
-			if (HCS_PPC (ehci->hcs_params)){
+			if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) {
 				ehci_writel(ehci,
 					temp & ~(PORT_RWC_BITS | PORT_POWER),
 					status_reg);
+				temp = ehci_readl(ehci, status_reg);
 			}
 		}
 
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index b5a0bf649c9..592d5f76803 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -40,27 +40,9 @@ static int ehci_msm_reset(struct usb_hcd *hcd)
 	int retval;
 
 	ehci->caps = USB_CAPLENGTH;
-	ehci->regs = USB_CAPLENGTH +
-		HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
-	dbg_hcs_params(ehci, "reset");
-	dbg_hcc_params(ehci, "reset");
-
-	/* cache the data to minimize the chip reads*/
-	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-
 	hcd->has_tt = 1;
-	ehci->sbrn = HCD_USB2;
-
-	retval = ehci_halt(ehci);
-	if (retval)
-		return retval;
-
-	/* data structure init */
-	retval = ehci_init(hcd);
-	if (retval)
-		return retval;
 
-	retval = ehci_reset(ehci);
+	retval = ehci_setup(hcd);
 	if (retval)
 		return retval;
 
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 5d6bc624c96..0917e3a3246 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -103,7 +103,7 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
 	if (!(hw->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
 		unsigned	is_out, epnum;
 
-		is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8));
+		is_out = qh->is_out;
 		epnum = (hc32_to_cpup(ehci, &hw->hw_info1) >> 8) & 0x0f;
 		if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
 			hw->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
@@ -946,6 +946,7 @@ done:
 	hw = qh->hw;
 	hw->hw_info1 = cpu_to_hc32(ehci, info1);
 	hw->hw_info2 = cpu_to_hc32(ehci, info2);
+	qh->is_out = !is_input;
 	usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
 	qh_refresh (ehci, qh);
 	return qh;
@@ -1231,6 +1232,8 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 	prev->hw->hw_next = qh->hw->hw_next;
 	prev->qh_next = qh->qh_next;
+	if (ehci->qh_scan_next == qh)
+		ehci->qh_scan_next = qh->qh_next.qh;
 	wmb ();
 
 	/* If the controller isn't running, we don't have to wait for it */
@@ -1256,53 +1259,49 @@ static void scan_async (struct ehci_hcd *ehci)
 	struct ehci_qh		*qh;
 	enum ehci_timer_action	action = TIMER_IO_WATCHDOG;
 
-	ehci->stamp = ehci_readl(ehci, &ehci->regs->frame_index);
 	timer_action_done (ehci, TIMER_ASYNC_SHRINK);
-rescan:
 	stopped = !HC_IS_RUNNING(ehci_to_hcd(ehci)->state);
-	qh = ehci->async->qh_next.qh;
-	if (likely (qh != NULL)) {
-		do {
-			/* clean any finished work for this qh */
-			if (!list_empty(&qh->qtd_list) && (stopped ||
-					qh->stamp != ehci->stamp)) {
-				int temp;
-
-				/* unlinks could happen here; completion
-				 * reporting drops the lock.  rescan using
-				 * the latest schedule, but don't rescan
-				 * qhs we already finished (no looping)
-				 * unless the controller is stopped.
-				 */
-				qh = qh_get (qh);
-				qh->stamp = ehci->stamp;
-				temp = qh_completions (ehci, qh);
-				if (qh->needs_rescan)
-					unlink_async(ehci, qh);
-				qh_put (qh);
-				if (temp != 0) {
-					goto rescan;
-				}
-			}
 
-			/* unlink idle entries, reducing DMA usage as well
-			 * as HCD schedule-scanning costs.  delay for any qh
-			 * we just scanned, there's a not-unusual case that it
-			 * doesn't stay idle for long.
-			 * (plus, avoids some kind of re-activation race.)
+	ehci->qh_scan_next = ehci->async->qh_next.qh;
+	while (ehci->qh_scan_next) {
+		qh = ehci->qh_scan_next;
+		ehci->qh_scan_next = qh->qh_next.qh;
+ rescan:
+		/* clean any finished work for this qh */
+		if (!list_empty(&qh->qtd_list)) {
+			int temp;
+
+			/*
+			 * Unlinks could happen here; completion reporting
+			 * drops the lock.  That's why ehci->qh_scan_next
+			 * always holds the next qh to scan; if the next qh
+			 * gets unlinked then ehci->qh_scan_next is adjusted
+			 * in start_unlink_async().
 			 */
-			if (list_empty(&qh->qtd_list)
-					&& qh->qh_state == QH_STATE_LINKED) {
-				if (!ehci->reclaim && (stopped ||
-					((ehci->stamp - qh->stamp) & 0x1fff)
-						>= EHCI_SHRINK_FRAMES * 8))
-					start_unlink_async(ehci, qh);
-				else
-					action = TIMER_ASYNC_SHRINK;
-			}
+			qh = qh_get(qh);
+			temp = qh_completions(ehci, qh);
+			if (qh->needs_rescan)
+				unlink_async(ehci, qh);
+			qh->unlink_time = jiffies + EHCI_SHRINK_JIFFIES;
+			qh_put(qh);
+			if (temp != 0)
+				goto rescan;
+		}
 
-			qh = qh->qh_next.qh;
-		} while (qh);
+		/* unlink idle entries, reducing DMA usage as well
+		 * as HCD schedule-scanning costs.  delay for any qh
+		 * we just scanned, there's a not-unusual case that it
+		 * doesn't stay idle for long.
+		 * (plus, avoids some kind of re-activation race.)
+		 */
+		if (list_empty(&qh->qtd_list)
+				&& qh->qh_state == QH_STATE_LINKED) {
+			if (!ehci->reclaim && (stopped ||
+					time_after_eq(jiffies, qh->unlink_time)))
+				start_unlink_async(ehci, qh);
+			else
+				action = TIMER_ASYNC_SHRINK;
+		}
 	}
 	if (action == TIMER_ASYNC_SHRINK)
 		timer_action (ehci, TIMER_ASYNC_SHRINK);
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index e3374c8f7b3..b3958b3d316 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -189,6 +189,100 @@ static void s5p_ehci_shutdown(struct platform_device *pdev)
 		hcd->driver->shutdown(hcd);
 }
 
+#ifdef CONFIG_PM
+static int s5p_ehci_suspend(struct device *dev)
+{
+	struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev);
+	struct usb_hcd *hcd = s5p_ehci->hcd;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
+	unsigned long flags;
+	int rc = 0;
+
+	if (time_before(jiffies, ehci->next_statechange))
+		msleep(20);
+
+	/*
+	 * Root hub was already suspended. Disable irq emission and
+	 * mark HW unaccessible.  The PM and USB cores make sure that
+	 * the root hub is either suspended or stopped.
+	 */
+	ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
+	spin_lock_irqsave(&ehci->lock, flags);
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
+
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	spin_unlock_irqrestore(&ehci->lock, flags);
+
+	if (pdata && pdata->phy_exit)
+		pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+
+	return rc;
+}
+
+static int s5p_ehci_resume(struct device *dev)
+{
+	struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev);
+	struct usb_hcd *hcd = s5p_ehci->hcd;
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
+
+	if (pdata && pdata->phy_init)
+		pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+
+	if (time_before(jiffies, ehci->next_statechange))
+		msleep(100);
+
+	/* Mark hardware accessible again as we are out of D3 state by now */
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
+		int	mask = INTR_MASK;
+
+		ehci_prepare_ports_for_controller_resume(ehci);
+		if (!hcd->self.root_hub->do_remote_wakeup)
+			mask &= ~STS_PCD;
+		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+		ehci_readl(ehci, &ehci->regs->intr_enable);
+		return 0;
+	}
+
+	usb_root_hub_lost_power(hcd->self.root_hub);
+
+	(void) ehci_halt(ehci);
+	(void) ehci_reset(ehci);
+
+	/* emptying the schedule aborts any urbs */
+	spin_lock_irq(&ehci->lock);
+	if (ehci->reclaim)
+		end_unlink_async(ehci);
+	ehci_work(ehci);
+	spin_unlock_irq(&ehci->lock);
+
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+
+	/* here we "know" root ports should always stay powered */
+	ehci_port_power(ehci, 1);
+
+	hcd->state = HC_STATE_SUSPENDED;
+
+	return 0;
+}
+#else
+#define s5p_ehci_suspend	NULL
+#define s5p_ehci_resume		NULL
+#endif
+
+static const struct dev_pm_ops s5p_ehci_pm_ops = {
+	.suspend	= s5p_ehci_suspend,
+	.resume		= s5p_ehci_resume,
+};
+
 static struct platform_driver s5p_ehci_driver = {
 	.probe		= s5p_ehci_probe,
 	.remove		= __devexit_p(s5p_ehci_remove),
@@ -196,6 +290,7 @@ static struct platform_driver s5p_ehci_driver = {
 	.driver = {
 		.name	= "s5p-ehci",
 		.owner	= THIS_MODULE,
+		.pm	= &s5p_ehci_pm_ops,
 	}
 };
 
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 6c9fbe352f7..2abf8543f08 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -172,7 +172,7 @@ periodic_usecs (struct ehci_hcd *ehci, unsigned frame, unsigned uframe)
 		}
 	}
 #ifdef	DEBUG
-	if (usecs > 100)
+	if (usecs > ehci->uframe_periodic_max)
 		ehci_err (ehci, "uframe %d sched overrun: %d usecs\n",
 			frame * 8 + uframe, usecs);
 #endif
@@ -709,11 +709,8 @@ static int check_period (
 	if (uframe >= 8)
 		return 0;
 
-	/*
-	 * 80% periodic == 100 usec/uframe available
-	 * convert "usecs we need" to "max already claimed"
-	 */
-	usecs = 100 - usecs;
+	/* convert "usecs we need" to "max already claimed" */
+	usecs = ehci->uframe_periodic_max - usecs;
 
 	/* we "know" 2 and 4 uframe intervals were rejected; so
 	 * for period 0, check _every_ microframe in the schedule.
@@ -1286,9 +1283,9 @@ itd_slot_ok (
 {
 	uframe %= period;
 	do {
-		/* can't commit more than 80% periodic == 100 usec */
+		/* can't commit more than uframe_periodic_max usec */
 		if (periodic_usecs (ehci, uframe >> 3, uframe & 0x7)
-				> (100 - usecs))
+				> (ehci->uframe_periodic_max - usecs))
 			return 0;
 
 		/* we know urb->interval is 2^N uframes */
@@ -1345,7 +1342,7 @@ sitd_slot_ok (
 #endif
 
 		/* check starts (OUT uses more than one) */
-		max_used = 100 - stream->usecs;
+		max_used = ehci->uframe_periodic_max - stream->usecs;
 		for (tmp = stream->raw_mask & 0xff; tmp; tmp >>= 1, uf++) {
 			if (periodic_usecs (ehci, frame, uf) > max_used)
 				return 0;
@@ -1354,7 +1351,7 @@ sitd_slot_ok (
 		/* for IN, check CSPLIT */
 		if (stream->c_usecs) {
 			uf = uframe & 7;
-			max_used = 100 - stream->c_usecs;
+			max_used = ehci->uframe_periodic_max - stream->c_usecs;
 			do {
 				tmp = 1 << uf;
 				tmp <<= 8;
diff --git a/drivers/usb/host/ehci-sysfs.c b/drivers/usb/host/ehci-sysfs.c
new file mode 100644
index 00000000000..14ced00ba22
--- /dev/null
+++ b/drivers/usb/host/ehci-sysfs.c
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 2007 by Alan Stern
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* this file is part of ehci-hcd.c */
+
+
+/* Display the ports dedicated to the companion controller */
+static ssize_t show_companion(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	struct ehci_hcd		*ehci;
+	int			nports, index, n;
+	int			count = PAGE_SIZE;
+	char			*ptr = buf;
+
+	ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+	nports = HCS_N_PORTS(ehci->hcs_params);
+
+	for (index = 0; index < nports; ++index) {
+		if (test_bit(index, &ehci->companion_ports)) {
+			n = scnprintf(ptr, count, "%d\n", index + 1);
+			ptr += n;
+			count -= n;
+		}
+	}
+	return ptr - buf;
+}
+
+/*
+ * Dedicate or undedicate a port to the companion controller.
+ * Syntax is "[-]portnum", where a leading '-' sign means
+ * return control of the port to the EHCI controller.
+ */
+static ssize_t store_companion(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct ehci_hcd		*ehci;
+	int			portnum, new_owner;
+
+	ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+	new_owner = PORT_OWNER;		/* Owned by companion */
+	if (sscanf(buf, "%d", &portnum) != 1)
+		return -EINVAL;
+	if (portnum < 0) {
+		portnum = - portnum;
+		new_owner = 0;		/* Owned by EHCI */
+	}
+	if (portnum <= 0 || portnum > HCS_N_PORTS(ehci->hcs_params))
+		return -ENOENT;
+	portnum--;
+	if (new_owner)
+		set_bit(portnum, &ehci->companion_ports);
+	else
+		clear_bit(portnum, &ehci->companion_ports);
+	set_owner(ehci, portnum, new_owner);
+	return count;
+}
+static DEVICE_ATTR(companion, 0644, show_companion, store_companion);
+
+
+/*
+ * Display / Set uframe_periodic_max
+ */
+static ssize_t show_uframe_periodic_max(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct ehci_hcd		*ehci;
+	int			n;
+
+	ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+	n = scnprintf(buf, PAGE_SIZE, "%d\n", ehci->uframe_periodic_max);
+	return n;
+}
+
+
+static ssize_t store_uframe_periodic_max(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct ehci_hcd		*ehci;
+	unsigned		uframe_periodic_max;
+	unsigned		frame, uframe;
+	unsigned short		allocated_max;
+	unsigned long		flags;
+	ssize_t			ret;
+
+	ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+	if (kstrtouint(buf, 0, &uframe_periodic_max) < 0)
+		return -EINVAL;
+
+	if (uframe_periodic_max < 100 || uframe_periodic_max >= 125) {
+		ehci_info(ehci, "rejecting invalid request for "
+				"uframe_periodic_max=%u\n", uframe_periodic_max);
+		return -EINVAL;
+	}
+
+	ret = -EINVAL;
+
+	/*
+	 * lock, so that our checking does not race with possible periodic
+	 * bandwidth allocation through submitting new urbs.
+	 */
+	spin_lock_irqsave (&ehci->lock, flags);
+
+	/*
+	 * for request to decrease max periodic bandwidth, we have to check
+	 * every microframe in the schedule to see whether the decrease is
+	 * possible.
+	 */
+	if (uframe_periodic_max < ehci->uframe_periodic_max) {
+		allocated_max = 0;
+
+		for (frame = 0; frame < ehci->periodic_size; ++frame)
+			for (uframe = 0; uframe < 7; ++uframe)
+				allocated_max = max(allocated_max,
+						    periodic_usecs (ehci, frame, uframe));
+
+		if (allocated_max > uframe_periodic_max) {
+			ehci_info(ehci,
+				"cannot decrease uframe_periodic_max becase "
+				"periodic bandwidth is already allocated "
+				"(%u > %u)\n",
+				allocated_max, uframe_periodic_max);
+			goto out_unlock;
+		}
+	}
+
+	/* increasing is always ok */
+
+	ehci_info(ehci, "setting max periodic bandwidth to %u%% "
+			"(== %u usec/uframe)\n",
+			100*uframe_periodic_max/125, uframe_periodic_max);
+
+	if (uframe_periodic_max != 100)
+		ehci_warn(ehci, "max periodic bandwidth set is non-standard\n");
+
+	ehci->uframe_periodic_max = uframe_periodic_max;
+	ret = count;
+
+out_unlock:
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	return ret;
+}
+static DEVICE_ATTR(uframe_periodic_max, 0644, show_uframe_periodic_max, store_uframe_periodic_max);
+
+
+static inline int create_sysfs_files(struct ehci_hcd *ehci)
+{
+	struct device	*controller = ehci_to_hcd(ehci)->self.controller;
+	int	i = 0;
+
+	/* with integrated TT there is no companion! */
+	if (!ehci_is_TDI(ehci))
+		i = device_create_file(controller, &dev_attr_companion);
+	if (i)
+		goto out;
+
+	i = device_create_file(controller, &dev_attr_uframe_periodic_max);
+out:
+	return i;
+}
+
+static inline void remove_sysfs_files(struct ehci_hcd *ehci)
+{
+	struct device	*controller = ehci_to_hcd(ehci)->self.controller;
+
+	/* with integrated TT there is no companion! */
+	if (!ehci_is_TDI(ehci))
+		device_remove_file(controller, &dev_attr_companion);
+
+	device_remove_file(controller, &dev_attr_uframe_periodic_max);
+}
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bd6ff489baf..cc7d337ec35 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -75,6 +75,7 @@ struct ehci_hcd {			/* one per controller */
 	struct ehci_qh		*async;
 	struct ehci_qh		*dummy;		/* For AMD quirk use */
 	struct ehci_qh		*reclaim;
+	struct ehci_qh		*qh_scan_next;
 	unsigned		scanning : 1;
 
 	/* periodic schedule support */
@@ -87,6 +88,8 @@ struct ehci_hcd {			/* one per controller */
 	union ehci_shadow	*pshadow;	/* mirror hw periodic table */
 	int			next_uframe;	/* scan periodic, start here */
 	unsigned		periodic_sched;	/* periodic activity count */
+	unsigned		uframe_periodic_max; /* max periodic time per uframe */
+
 
 	/* list of itds & sitds completed while clock_frame was still active */
 	struct list_head	cached_itd_list;
@@ -117,7 +120,6 @@ struct ehci_hcd {			/* one per controller */
 	struct timer_list	iaa_watchdog;
 	struct timer_list	watchdog;
 	unsigned long		actions;
-	unsigned		stamp;
 	unsigned		periodic_stamp;
 	unsigned		random_frame;
 	unsigned long		next_statechange;
@@ -343,6 +345,7 @@ struct ehci_qh {
 	struct ehci_qh		*reclaim;	/* next to reclaim */
 
 	struct ehci_hcd		*ehci;
+	unsigned long		unlink_time;
 
 	/*
 	 * Do NOT use atomic operations for QH refcounting. On some CPUs
@@ -374,6 +377,7 @@ struct ehci_qh {
 #define NO_FRAME ((unsigned short)~0)			/* pick new start */
 
 	struct usb_device	*dev;		/* access to TT */
+	unsigned		is_out:1;	/* bulk or intr OUT */
 	unsigned		clearing_tt:1;	/* Clear-TT-Buf in progress */
 };
 
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index f47867ff78c..14cecb52a9f 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2008 Renesas Solutions Corp.
  *
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index fd930618c28..a9d315906e3 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -35,6 +35,8 @@
 #define OHCI_INTRSTATUS		0x0c
 #define OHCI_INTRENABLE		0x10
 #define OHCI_INTRDISABLE	0x14
+#define OHCI_FMINTERVAL		0x34
+#define OHCI_HCR		(1 << 0)	/* host controller reset */
 #define OHCI_OCR		(1 << 3)	/* ownership change request */
 #define OHCI_CTRL_RWC		(1 << 9)	/* remote wakeup connected */
 #define OHCI_CTRL_IR		(1 << 8)	/* interrupt routing */
@@ -497,6 +499,32 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 
 	/* reset controller, preserving RWC (and possibly IR) */
 	writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
+	readl(base + OHCI_CONTROL);
+
+	/* Some NVIDIA controllers stop working if kept in RESET for too long */
+	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) {
+		u32 fminterval;
+		int cnt;
+
+		/* drive reset for at least 50 ms (7.1.7.5) */
+		msleep(50);
+
+		/* software reset of the controller, preserving HcFmInterval */
+		fminterval = readl(base + OHCI_FMINTERVAL);
+		writel(OHCI_HCR, base + OHCI_CMDSTATUS);
+
+		/* reset requires max 10 us delay */
+		for (cnt = 30; cnt > 0; --cnt) {	/* ... allow extra time */
+			if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
+				break;
+			udelay(1);
+		}
+		writel(fminterval, base + OHCI_FMINTERVAL);
+
+		/* Now we're in the SUSPEND state with all devices reset
+		 * and wakeups and interrupts disabled
+		 */
+	}
 
 	/*
 	 * disable interrupts
@@ -507,20 +535,34 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 	iounmap(base);
 }
 
+static const struct dmi_system_id __initconst ehci_dmi_nohandoff_table[] = {
+	{
+		/*  Pegatron Lucid (ExoPC) */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "EXOPG06411"),
+			DMI_MATCH(DMI_BIOS_VERSION, "Lucid-CE-133"),
+		},
+	},
+	{
+		/*  Pegatron Lucid (Ordissimo AIRIS) */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "M11JB"),
+			DMI_MATCH(DMI_BIOS_VERSION, "Lucid-GE-133"),
+		},
+	},
+	{ }
+};
+
 static void __devinit ehci_bios_handoff(struct pci_dev *pdev,
 					void __iomem *op_reg_base,
 					u32 cap, u8 offset)
 {
 	int try_handoff = 1, tried_handoff = 0;
 
-	/* The Pegatron Lucid (ExoPC) tablet sporadically waits for 90
-	 * seconds trying the handoff on its unused controller.  Skip
-	 * it. */
+	/* The Pegatron Lucid tablet sporadically waits for 98 seconds trying
+	 * the handoff on its unused controller.  Skip it. */
 	if (pdev->vendor == 0x8086 && pdev->device == 0x283a) {
-		const char *dmi_bn = dmi_get_system_info(DMI_BOARD_NAME);
-		const char *dmi_bv = dmi_get_system_info(DMI_BIOS_VERSION);
-		if (dmi_bn && !strcmp(dmi_bn, "EXOPG06411") &&
-		    dmi_bv && !strcmp(dmi_bv, "Lucid-CE-133"))
+		if (dmi_check_system(ehci_dmi_nohandoff_table))
 			try_handoff = 0;
 	}
 
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 4586369dda0..40a0d8b03ad 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -6,7 +6,7 @@
  * Portions Copyright (C) 2004-2005 David Brownell
  * Portions Copyright (C) 1999 Roman Weissgaerber
  *
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -1438,7 +1438,7 @@ static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
 	if (pipenum > 0)
 		r8a66597_write(r8a66597, ~(1 << pipenum), BEMPSTS);
 	if (urb->transfer_buffer) {
-		r8a66597_write_fifo(r8a66597, td->pipe->fifoaddr, buf, size);
+		r8a66597_write_fifo(r8a66597, td->pipe, buf, size);
 		if (!usb_pipebulk(urb->pipe) || td->maxpacket != size)
 			r8a66597_write(r8a66597, BVAL, td->pipe->fifoctr);
 	}
@@ -2306,7 +2306,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd)
 
 		dbg("resume port = %d", port);
 		rh->port &= ~USB_PORT_STAT_SUSPEND;
-		rh->port |= USB_PORT_STAT_C_SUSPEND < 16;
+		rh->port |= USB_PORT_STAT_C_SUSPEND << 16;
 		r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg);
 		msleep(50);
 		r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg);
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index 25563e9a90b..f28782d20ee 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -201,11 +201,26 @@ static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
 	iowrite16(val, r8a66597->reg + offset);
 }
 
+static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
+				 u16 val, u16 pat, unsigned long offset)
+{
+	u16 tmp;
+	tmp = r8a66597_read(r8a66597, offset);
+	tmp = tmp & (~pat);
+	tmp = tmp | val;
+	r8a66597_write(r8a66597, tmp, offset);
+}
+
+#define r8a66597_bclr(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, 0, val, offset)
+#define r8a66597_bset(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, val, 0, offset)
+
 static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
-				       unsigned long offset, u16 *buf,
+				       struct r8a66597_pipe *pipe, u16 *buf,
 				       int len)
 {
-	void __iomem *fifoaddr = r8a66597->reg + offset;
+	void __iomem *fifoaddr = r8a66597->reg + pipe->fifoaddr;
 	unsigned long count;
 	unsigned char *pb;
 	int i;
@@ -230,26 +245,15 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 		iowrite16_rep(fifoaddr, buf, len);
 		if (unlikely(odd)) {
 			buf = &buf[len];
+			if (r8a66597->pdata->wr0_shorted_to_wr1)
+				r8a66597_bclr(r8a66597, MBW_16, pipe->fifosel);
 			iowrite8((unsigned char)*buf, fifoaddr);
+			if (r8a66597->pdata->wr0_shorted_to_wr1)
+				r8a66597_bset(r8a66597, MBW_16, pipe->fifosel);
 		}
 	}
 }
 
-static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
-				 u16 val, u16 pat, unsigned long offset)
-{
-	u16 tmp;
-	tmp = r8a66597_read(r8a66597, offset);
-	tmp = tmp & (~pat);
-	tmp = tmp | val;
-	r8a66597_write(r8a66597, tmp, offset);
-}
-
-#define r8a66597_bclr(r8a66597, val, offset)	\
-			r8a66597_mdfy(r8a66597, 0, val, offset)
-#define r8a66597_bset(r8a66597, val, offset)	\
-			r8a66597_mdfy(r8a66597, val, 0, offset)
-
 static inline unsigned long get_syscfg_reg(int port)
 {
 	return port == 0 ? SYSCFG0 : SYSCFG1;
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 1f50b4468e8..e9b0f043455 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -266,11 +266,11 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 		xhci_dbg(xhci, "Interrupter target = 0x%x\n",
 			 GET_INTR_TARGET(le32_to_cpu(trb->link.intr_target)));
 		xhci_dbg(xhci, "Cycle bit = %u\n",
-			 (unsigned int) (le32_to_cpu(trb->link.control) & TRB_CYCLE));
+			 le32_to_cpu(trb->link.control) & TRB_CYCLE);
 		xhci_dbg(xhci, "Toggle cycle bit = %u\n",
-			 (unsigned int) (le32_to_cpu(trb->link.control) & LINK_TOGGLE));
+			 le32_to_cpu(trb->link.control) & LINK_TOGGLE);
 		xhci_dbg(xhci, "No Snoop bit = %u\n",
-			 (unsigned int) (le32_to_cpu(trb->link.control) & TRB_NO_SNOOP));
+			 le32_to_cpu(trb->link.control) & TRB_NO_SNOOP);
 		break;
 	case TRB_TYPE(TRB_TRANSFER):
 		address = le64_to_cpu(trb->trans_event.buffer);
@@ -284,9 +284,9 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 		address = le64_to_cpu(trb->event_cmd.cmd_trb);
 		xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
 		xhci_dbg(xhci, "Completion status = %u\n",
-			 (unsigned int) GET_COMP_CODE(le32_to_cpu(trb->event_cmd.status)));
+			 GET_COMP_CODE(le32_to_cpu(trb->event_cmd.status)));
 		xhci_dbg(xhci, "Flags = 0x%x\n",
-			 (unsigned int) le32_to_cpu(trb->event_cmd.flags));
+			 le32_to_cpu(trb->event_cmd.flags));
 		break;
 	default:
 		xhci_dbg(xhci, "Unknown TRB with TRB type ID %u\n",
@@ -318,10 +318,10 @@ void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg)
 	for (i = 0; i < TRBS_PER_SEGMENT; ++i) {
 		trb = &seg->trbs[i];
 		xhci_dbg(xhci, "@%016llx %08x %08x %08x %08x\n", addr,
-			 (u32)lower_32_bits(le64_to_cpu(trb->link.segment_ptr)),
-			 (u32)upper_32_bits(le64_to_cpu(trb->link.segment_ptr)),
-			 (unsigned int) le32_to_cpu(trb->link.intr_target),
-			 (unsigned int) le32_to_cpu(trb->link.control));
+			 lower_32_bits(le64_to_cpu(trb->link.segment_ptr)),
+			 upper_32_bits(le64_to_cpu(trb->link.segment_ptr)),
+			 le32_to_cpu(trb->link.intr_target),
+			 le32_to_cpu(trb->link.control));
 		addr += sizeof(*trb);
 	}
 }
@@ -402,8 +402,8 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
 			 addr,
 			 lower_32_bits(le64_to_cpu(entry->seg_addr)),
 			 upper_32_bits(le64_to_cpu(entry->seg_addr)),
-			 (unsigned int) le32_to_cpu(entry->seg_size),
-			 (unsigned int) le32_to_cpu(entry->rsvd));
+			 le32_to_cpu(entry->seg_size),
+			 le32_to_cpu(entry->rsvd));
 		addr += sizeof(*entry);
 	}
 }
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fcb7f7efc86..d446886b22b 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -89,8 +89,8 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
 		return;
 	prev->next = next;
 	if (link_trbs) {
-		prev->trbs[TRBS_PER_SEGMENT-1].link.
-			segment_ptr = cpu_to_le64(next->dma);
+		prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr =
+			cpu_to_le64(next->dma);
 
 		/* Set the last TRB in the segment to have a TRB type ID of Link TRB */
 		val = le32_to_cpu(prev->trbs[TRBS_PER_SEGMENT-1].link.control);
@@ -187,8 +187,8 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
 
 	if (link_trbs) {
 		/* See section 4.9.2.1 and 6.4.4.1 */
-		prev->trbs[TRBS_PER_SEGMENT-1].link.
-			control |= cpu_to_le32(LINK_TOGGLE);
+		prev->trbs[TRBS_PER_SEGMENT-1].link.control |=
+			cpu_to_le32(LINK_TOGGLE);
 		xhci_dbg(xhci, "Wrote link toggle flag to"
 				" segment %p (virtual), 0x%llx (DMA)\n",
 				prev, (unsigned long long)prev->dma);
@@ -549,8 +549,8 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 		addr = cur_ring->first_seg->dma |
 			SCT_FOR_CTX(SCT_PRI_TR) |
 			cur_ring->cycle_state;
-		stream_info->stream_ctx_array[cur_stream].
-			stream_ring = cpu_to_le64(addr);
+		stream_info->stream_ctx_array[cur_stream].stream_ring =
+			cpu_to_le64(addr);
 		xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n",
 				cur_stream, (unsigned long long) addr);
 
@@ -786,7 +786,7 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 	xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
 		 slot_id,
 		 &xhci->dcbaa->dev_context_ptrs[slot_id],
-		 (unsigned long long) le64_to_cpu(xhci->dcbaa->dev_context_ptrs[slot_id]));
+		 le64_to_cpu(xhci->dcbaa->dev_context_ptrs[slot_id]));
 
 	return 1;
 fail:
@@ -890,19 +890,19 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
 
 	/* 3) Only the control endpoint is valid - one endpoint context */
-	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | (u32) udev->route);
+	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route);
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-		slot_ctx->dev_info |= cpu_to_le32((u32) SLOT_SPEED_SS);
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS);
 		break;
 	case USB_SPEED_HIGH:
-		slot_ctx->dev_info |= cpu_to_le32((u32) SLOT_SPEED_HS);
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_HS);
 		break;
 	case USB_SPEED_FULL:
-		slot_ctx->dev_info |= cpu_to_le32((u32) SLOT_SPEED_FS);
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_FS);
 		break;
 	case USB_SPEED_LOW:
-		slot_ctx->dev_info |= cpu_to_le32((u32) SLOT_SPEED_LS);
+		slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_LS);
 		break;
 	case USB_SPEED_WIRELESS:
 		xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
@@ -916,7 +916,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	port_num = xhci_find_real_port_number(xhci, udev);
 	if (!port_num)
 		return -EINVAL;
-	slot_ctx->dev_info2 |= cpu_to_le32((u32) ROOT_HUB_PORT(port_num));
+	slot_ctx->dev_info2 |= cpu_to_le32(ROOT_HUB_PORT(port_num));
 	/* Set the port number in the virtual_device to the faked port number */
 	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
 			top_dev = top_dev->parent)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 70cacbbe7fb..7113d16e2d3 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -113,15 +113,13 @@ static int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
 	if (ring == xhci->event_ring)
 		return trb == &seg->trbs[TRBS_PER_SEGMENT];
 	else
-		return (le32_to_cpu(trb->link.control) & TRB_TYPE_BITMASK)
-			== TRB_TYPE(TRB_LINK);
+		return TRB_TYPE_LINK_LE32(trb->link.control);
 }
 
 static int enqueue_is_link_trb(struct xhci_ring *ring)
 {
 	struct xhci_link_trb *link = &ring->enqueue->link;
-	return ((le32_to_cpu(link->control) & TRB_TYPE_BITMASK) ==
-		TRB_TYPE(TRB_LINK));
+	return TRB_TYPE_LINK_LE32(link->control);
 }
 
 /* Updates trb to point to the next TRB in the ring, and updates seg if the next
@@ -372,7 +370,7 @@ static struct xhci_segment *find_trb_seg(
 	while (cur_seg->trbs > trb ||
 			&cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) {
 		generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic;
-		if (le32_to_cpu(generic_trb->field[3]) & LINK_TOGGLE)
+		if (generic_trb->field[3] & cpu_to_le32(LINK_TOGGLE))
 			*cycle_state ^= 0x1;
 		cur_seg = cur_seg->next;
 		if (cur_seg == start_seg)
@@ -489,8 +487,8 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 	}
 
 	trb = &state->new_deq_ptr->generic;
-	if ((le32_to_cpu(trb->field[3]) & TRB_TYPE_BITMASK) ==
-	    TRB_TYPE(TRB_LINK) && (le32_to_cpu(trb->field[3]) & LINK_TOGGLE))
+	if (TRB_TYPE_LINK_LE32(trb->field[3]) &&
+	    (trb->field[3] & cpu_to_le32(LINK_TOGGLE)))
 		state->new_cycle_state ^= 0x1;
 	next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
 
@@ -525,8 +523,7 @@ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 	for (cur_seg = cur_td->start_seg, cur_trb = cur_td->first_trb;
 			true;
 			next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
-		if ((le32_to_cpu(cur_trb->generic.field[3]) & TRB_TYPE_BITMASK)
-		    == TRB_TYPE(TRB_LINK)) {
+		if (TRB_TYPE_LINK_LE32(cur_trb->generic.field[3])) {
 			/* Unchain any chained Link TRBs, but
 			 * leave the pointers intact.
 			 */
@@ -1000,7 +997,7 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci,
 	 * but we don't care.
 	 */
 	xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
-		 (unsigned int) GET_COMP_CODE(le32_to_cpu(event->status)));
+		 GET_COMP_CODE(le32_to_cpu(event->status)));
 
 	/* HW with the reset endpoint quirk needs to have a configure endpoint
 	 * command complete before the endpoint can be used.  Queue that here
@@ -1458,7 +1455,8 @@ static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci,
 		 * endpoint anyway.  Check if a babble halted the
 		 * endpoint.
 		 */
-		if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) == EP_STATE_HALTED)
+		if ((ep_ctx->ep_info & cpu_to_le32(EP_STATE_MASK)) ==
+		    cpu_to_le32(EP_STATE_HALTED))
 			return 1;
 
 	return 0;
@@ -1753,10 +1751,8 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		for (cur_trb = ep_ring->dequeue,
 		     cur_seg = ep_ring->deq_seg; cur_trb != event_trb;
 		     next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
-			if ((le32_to_cpu(cur_trb->generic.field[3]) &
-			 TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
-			    (le32_to_cpu(cur_trb->generic.field[3]) &
-			 TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
+			if (!TRB_TYPE_NOOP_LE32(cur_trb->generic.field[3]) &&
+			    !TRB_TYPE_LINK_LE32(cur_trb->generic.field[3]))
 				len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
 		}
 		len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
@@ -1885,10 +1881,8 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
 				cur_trb != event_trb;
 				next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
-			if ((le32_to_cpu(cur_trb->generic.field[3]) &
-			 TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
-			    (le32_to_cpu(cur_trb->generic.field[3]) &
-			 TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
+			if (!TRB_TYPE_NOOP_LE32(cur_trb->generic.field[3]) &&
+			    !TRB_TYPE_LINK_LE32(cur_trb->generic.field[3]))
 				td->urb->actual_length +=
 					TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
 		}
@@ -2047,8 +2041,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 				  TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
 				  ep_index);
 			xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
-				 (unsigned int) (le32_to_cpu(event->flags)
-						 & TRB_TYPE_BITMASK)>>10);
+				 (le32_to_cpu(event->flags) &
+				  TRB_TYPE_BITMASK)>>10);
 			xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
 			if (ep->skip) {
 				ep->skip = false;
@@ -2119,9 +2113,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		 * corresponding TD has been cancelled. Just ignore
 		 * the TD.
 		 */
-		if ((le32_to_cpu(event_trb->generic.field[3])
-			     & TRB_TYPE_BITMASK)
-				 == TRB_TYPE(TRB_TR_NOOP)) {
+		if (TRB_TYPE_NOOP_LE32(event_trb->generic.field[3])) {
 			xhci_dbg(xhci,
 				 "event_trb is a no-op TRB. Skip it\n");
 			goto cleanup;
@@ -2452,7 +2444,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 				next->link.control |= cpu_to_le32(TRB_CHAIN);
 
 			wmb();
-			next->link.control ^= cpu_to_le32((u32) TRB_CYCLE);
+			next->link.control ^= cpu_to_le32(TRB_CYCLE);
 
 			/* Toggle the cycle bit after the last ring segment. */
 			if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index f5fe1ac301a..763f484bc09 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1342,8 +1342,8 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	/* If the HC already knows the endpoint is disabled,
 	 * or the HCD has noted it is disabled, ignore this request
 	 */
-	if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) ==
-	    EP_STATE_DISABLED ||
+	if (((ep_ctx->ep_info & cpu_to_le32(EP_STATE_MASK)) ==
+	     cpu_to_le32(EP_STATE_DISABLED)) ||
 	    le32_to_cpu(ctrl_ctx->drop_flags) &
 	    xhci_get_endpoint_flag(&ep->desc)) {
 		xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
@@ -1758,8 +1758,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 		/* Enqueue pointer can be left pointing to the link TRB,
 		 * we must handle that
 		 */
-		if ((le32_to_cpu(command->command_trb->link.control)
-		     & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
+		if (TRB_TYPE_LINK_LE32(command->command_trb->link.control))
 			command->command_trb =
 				xhci->cmd_ring->enq_seg->next->trbs;
 
@@ -2559,8 +2558,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Enqueue pointer can be left pointing to the link TRB,
 	 * we must handle that
 	 */
-	if ((le32_to_cpu(reset_device_cmd->command_trb->link.control)
-	     & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
+	if (TRB_TYPE_LINK_LE32(reset_device_cmd->command_trb->link.control))
 		reset_device_cmd->command_trb =
 			xhci->cmd_ring->enq_seg->next->trbs;
 
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index d8bbf5ccb10..cae8e23308b 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1072,6 +1072,13 @@ union xhci_trb {
 /* Get NEC firmware revision. */
 #define	TRB_NEC_GET_FW		49
 
+#define TRB_TYPE_LINK(x)	(((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
+/* Above, but for __le32 types -- can avoid work by swapping constants: */
+#define TRB_TYPE_LINK_LE32(x)	(((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
+				 cpu_to_le32(TRB_TYPE(TRB_LINK)))
+#define TRB_TYPE_NOOP_LE32(x)	(((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
+				 cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
+
 #define NEC_FW_MINOR(p)		(((p) >> 0) & 0xff)
 #define NEC_FW_MAJOR(p)		(((p) >> 8) & 0xff)
 
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index c302e1983c7..1c3afcc11bd 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -670,6 +670,9 @@ int mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus)
 	int busnum = ubus? ubus->busnum: 0;
 	int rc;
 
+	if (mon_dir == NULL)
+		return 0;
+
 	if (ubus != NULL) {
 		rc = snprintf(name, NAMESZ, "%dt", busnum);
 		if (rc <= 0 || rc >= NAMESZ)
@@ -740,12 +743,12 @@ int __init mon_text_init(void)
 
 	mondir = debugfs_create_dir("usbmon", usb_debug_root);
 	if (IS_ERR(mondir)) {
-		printk(KERN_NOTICE TAG ": debugfs is not available\n");
-		return -ENODEV;
+		/* debugfs not available, but we can use usbmon without it */
+		return 0;
 	}
 	if (mondir == NULL) {
 		printk(KERN_NOTICE TAG ": unable to create usbmon directory\n");
-		return -ENODEV;
+		return -ENOMEM;
 	}
 	mon_dir = mondir;
 	return 0;
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 13093481f91..6192b45959f 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -8,7 +8,7 @@ comment "Enable Host or Gadget support to see Inventra options"
 
 # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
 config USB_MUSB_HDRC
-	depends on (USB || USB_GADGET)
+	depends on USB && USB_GADGET
 	depends on (ARM || (BF54x && !BF544) || (BF52x && !BF522 && !BF523))
 	select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
 	select TWL4030_USB if MACH_OMAP_3430SDP
@@ -67,79 +67,6 @@ config USB_MUSB_UX500
 
 endchoice
 
-choice
-	prompt "Driver Mode"
-	depends on USB_MUSB_HDRC
-	help
-	  Dual-Role devices can support both host and peripheral roles,
-	  as well as a the special "OTG Device" role which can switch
-	  between both roles as needed.
-
-# use USB_MUSB_HDRC_HCD not USB_MUSB_HOST to #ifdef host side support;
-# OTG needs both roles, not just USB_MUSB_HOST.
-config USB_MUSB_HOST
-	depends on USB
-	bool "USB Host"
-	help
-	  Say Y here if your system supports the USB host role.
-	  If it has a USB "A" (rectangular), "Mini-A" (uncommon),
-	  or "Mini-AB" connector, it supports the host role.
-	  (With a "Mini-AB" connector, you should enable USB OTG.)
-
-# use USB_GADGET_MUSB_HDRC not USB_MUSB_PERIPHERAL to #ifdef peripheral
-# side support ... OTG needs both roles
-config USB_MUSB_PERIPHERAL
-	depends on USB_GADGET
-	bool "USB Peripheral (gadget stack)"
-	select USB_GADGET_MUSB_HDRC
-	help
-	  Say Y here if your system supports the USB peripheral role.
-	  If it has a USB "B" (squarish), "Mini-B", or "Mini-AB"
-	  connector, it supports the peripheral role.
-	  (With a "Mini-AB" connector, you should enable USB OTG.)
-
-config USB_MUSB_OTG
-	depends on USB && USB_GADGET && PM && EXPERIMENTAL
-	bool "Both host and peripheral:  USB OTG (On The Go) Device"
-	select USB_GADGET_MUSB_HDRC
-	select USB_OTG
-	help
-	   The most notable feature of USB OTG is support for a
-	   "Dual-Role" device, which can act as either a device
-	   or a host.  The initial role choice can be changed
-	   later, when two dual-role devices talk to each other.
-
-	   At this writing, the OTG support in this driver is incomplete,
-	   omitting the mandatory HNP or SRP protocols.  However, some
-	   of the cable based role switching works.  (That is, grounding
-	   the ID pin switches the controller to host mode, while leaving
-	   it floating leaves it in peripheral mode.)
-
-	   Select this if your system has a Mini-AB connector, or
-	   to simplify certain kinds of configuration.
-
-	   To implement your OTG Targeted Peripherals List (TPL), enable
-	   USB_OTG_WHITELIST and update "drivers/usb/core/otg_whitelist.h"
-	   to match your requirements.
-
-endchoice
-
-# enable peripheral support (including with OTG)
-config USB_GADGET_MUSB_HDRC
-	bool
-	depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
-#	default y
-#	select USB_GADGET_DUALSPEED
-#	select USB_GADGET_SELECTED
-
-# enables host support (including with OTG)
-config USB_MUSB_HDRC_HCD
-	bool
-	depends on USB_MUSB_HDRC && (USB_MUSB_HOST || USB_MUSB_OTG)
-	select USB_OTG if USB_GADGET_MUSB_HDRC
-	default y
-
-
 config MUSB_PIO_ONLY
 	bool 'Disable DMA (always use PIO)'
 	depends on USB_MUSB_HDRC
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index c4d228b6ef8..d8fd9d092de 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -6,8 +6,8 @@ obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
 
 musb_hdrc-y := musb_core.o
 
-musb_hdrc-$(CONFIG_USB_GADGET_MUSB_HDRC)	+= musb_gadget_ep0.o musb_gadget.o
-musb_hdrc-$(CONFIG_USB_MUSB_HDRC_HCD)		+= musb_virthub.o musb_host.o
+musb_hdrc-y					+= musb_gadget_ep0.o musb_gadget.o
+musb_hdrc-y					+= musb_virthub.o musb_host.o
 musb_hdrc-$(CONFIG_DEBUG_FS)			+= musb_debugfs.o
 
 # Hardware Glue Layer
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 23ac28f98d9..08f1d0b662a 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -124,11 +124,7 @@ static void am35x_musb_disable(struct musb *musb)
 	musb_writel(reg_base, USB_END_OF_INTR_REG, 0);
 }
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 #define portstate(stmt)		stmt
-#else
-#define portstate(stmt)
-#endif
 
 static void am35x_musb_set_vbus(struct musb *musb, int is_on)
 {
diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h
index bd9352a2ef2..c84dae546dc 100644
--- a/drivers/usb/musb/blackfin.h
+++ b/drivers/usb/musb/blackfin.h
@@ -47,7 +47,7 @@
  * So, need to either use silicon v0.2+ or disable DMA mode in MUSB.
  */
 #if ANOMALY_05000380 && defined(CONFIG_BF52x) && \
-    defined(CONFIG_USB_MUSB_HDRC) && !defined(CONFIG_MUSB_PIO_ONLY)
+	!defined(CONFIG_MUSB_PIO_ONLY)
 # error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1"
 #endif
 
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 662ed34980b..4da7492ddbd 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -172,11 +172,7 @@ static void da8xx_musb_disable(struct musb *musb)
 	musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
 }
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-#define portstate(stmt) 	stmt
-#else
-#define portstate(stmt)
-#endif
+#define portstate(stmt)		stmt
 
 static void da8xx_musb_set_vbus(struct musb *musb, int is_on)
 {
@@ -397,21 +393,15 @@ static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
 
 	cfgchip2 &= ~CFGCHIP2_OTGMODE;
 	switch (musb_mode) {
-#ifdef	CONFIG_USB_MUSB_HDRC_HCD
 	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
 		cfgchip2 |= CFGCHIP2_FORCE_HOST;
 		break;
-#endif
-#ifdef	CONFIG_USB_GADGET_MUSB_HDRC
 	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
 		cfgchip2 |= CFGCHIP2_FORCE_DEVICE;
 		break;
-#endif
-#ifdef	CONFIG_USB_MUSB_OTG
 	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
 		cfgchip2 |= CFGCHIP2_NO_OVERRIDE;
 		break;
-#endif
 	default:
 		dev_dbg(musb->controller, "Trying to set unsupported mode %u\n", musb_mode);
 	}
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 2a2adf6492c..8bdf25a8b02 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -143,12 +143,7 @@ static void davinci_musb_disable(struct musb *musb)
 }
 
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 #define	portstate(stmt)		stmt
-#else
-#define	portstate(stmt)
-#endif
-
 
 /*
  * VBUS SWITCHING IS BOARD-SPECIFIC ... at least for the DM6446 EVM,
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index bcbd1aba961..20a28731c33 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -328,8 +328,6 @@ void musb_load_testpacket(struct musb *musb)
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef	CONFIG_USB_MUSB_OTG
-
 /*
  * Handles OTG hnp timeouts, such as b_ase0_brst
  */
@@ -401,8 +399,6 @@ void musb_hnp_stop(struct musb *musb)
 	musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
 }
 
-#endif
-
 /*
  * Interrupt Service Routine to record USB "global" interrupts.
  * Since these do not happen often and signify things of
@@ -432,7 +428,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		dev_dbg(musb->controller, "RESUME (%s)\n", otg_state_string(musb->xceiv->state));
 
 		if (devctl & MUSB_DEVCTL_HM) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 			void __iomem *mbase = musb->mregs;
 
 			switch (musb->xceiv->state) {
@@ -472,17 +467,13 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 					"host",
 					otg_state_string(musb->xceiv->state));
 			}
-#endif
 		} else {
 			switch (musb->xceiv->state) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 			case OTG_STATE_A_SUSPEND:
 				/* possibly DISCONNECT is upcoming */
 				musb->xceiv->state = OTG_STATE_A_HOST;
 				usb_hcd_resume_root_hub(musb_to_hcd(musb));
 				break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 			case OTG_STATE_B_WAIT_ACON:
 			case OTG_STATE_B_PERIPHERAL:
 				/* disconnect while suspended?  we may
@@ -500,7 +491,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			case OTG_STATE_B_IDLE:
 				musb->int_usb &= ~MUSB_INTR_SUSPEND;
 				break;
-#endif
 			default:
 				WARNING("bogus %s RESUME (%s)\n",
 					"peripheral",
@@ -509,7 +499,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		}
 	}
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	/* see manual for the order of the tests */
 	if (int_usb & MUSB_INTR_SESSREQ) {
 		void __iomem *mbase = musb->mregs;
@@ -609,14 +598,12 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		handled = IRQ_HANDLED;
 	}
 
-#endif
 	if (int_usb & MUSB_INTR_SUSPEND) {
 		dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x power %02x\n",
 			otg_state_string(musb->xceiv->state), devctl, power);
 		handled = IRQ_HANDLED;
 
 		switch (musb->xceiv->state) {
-#ifdef	CONFIG_USB_MUSB_OTG
 		case OTG_STATE_A_PERIPHERAL:
 			/* We also come here if the cable is removed, since
 			 * this silicon doesn't report ID-no-longer-grounded.
@@ -633,7 +620,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 						? : OTG_TIME_A_WAIT_BCON));
 
 			break;
-#endif
 		case OTG_STATE_B_IDLE:
 			if (!musb->is_active)
 				break;
@@ -642,13 +628,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 			musb->is_active = is_otg_enabled(musb)
 					&& musb->xceiv->gadget->b_hnp_enable;
 			if (musb->is_active) {
-#ifdef	CONFIG_USB_MUSB_OTG
 				musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
 				dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n");
 				mod_timer(&musb->otg_timer, jiffies
 					+ msecs_to_jiffies(
 							OTG_TIME_B_ASE0_BRST));
-#endif
 			}
 			break;
 		case OTG_STATE_A_WAIT_BCON:
@@ -672,7 +656,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		}
 	}
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	if (int_usb & MUSB_INTR_CONNECT) {
 		struct usb_hcd *hcd = musb_to_hcd(musb);
 
@@ -682,7 +665,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
 		musb->ep0_stage = MUSB_EP0_START;
 
-#ifdef CONFIG_USB_MUSB_OTG
 		/* flush endpoints when transitioning from Device Mode */
 		if (is_peripheral_active(musb)) {
 			/* REVISIT HNP; just force disconnect */
@@ -690,7 +672,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		musb_writew(musb->mregs, MUSB_INTRTXE, musb->epmask);
 		musb_writew(musb->mregs, MUSB_INTRRXE, musb->epmask & 0xfffe);
 		musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7);
-#endif
 		musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED
 					|USB_PORT_STAT_HIGH_SPEED
 					|USB_PORT_STAT_ENABLE
@@ -739,7 +720,6 @@ b_host:
 		dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n",
 				otg_state_string(musb->xceiv->state), devctl);
 	}
-#endif	/* CONFIG_USB_MUSB_HDRC_HCD */
 
 	if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
 		dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n",
@@ -748,7 +728,6 @@ b_host:
 		handled = IRQ_HANDLED;
 
 		switch (musb->xceiv->state) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 		case OTG_STATE_A_HOST:
 		case OTG_STATE_A_SUSPEND:
 			usb_hcd_resume_root_hub(musb_to_hcd(musb));
@@ -757,8 +736,6 @@ b_host:
 				musb_platform_try_idle(musb, jiffies
 					+ msecs_to_jiffies(musb->a_wait_bcon));
 			break;
-#endif	/* HOST */
-#ifdef CONFIG_USB_MUSB_OTG
 		case OTG_STATE_B_HOST:
 			/* REVISIT this behaves for "real disconnect"
 			 * cases; make sure the other transitions from
@@ -777,13 +754,10 @@ b_host:
 			/* FALLTHROUGH */
 		case OTG_STATE_B_WAIT_ACON:
 			/* FALLTHROUGH */
-#endif	/* OTG */
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 		case OTG_STATE_B_PERIPHERAL:
 		case OTG_STATE_B_IDLE:
 			musb_g_disconnect(musb);
 			break;
-#endif	/* GADGET */
 		default:
 			WARNING("unhandled DISCONNECT transition (%s)\n",
 				otg_state_string(musb->xceiv->state));
@@ -814,7 +788,6 @@ b_host:
 			dev_dbg(musb->controller, "BUS RESET as %s\n",
 				otg_state_string(musb->xceiv->state));
 			switch (musb->xceiv->state) {
-#ifdef CONFIG_USB_OTG
 			case OTG_STATE_A_SUSPEND:
 				/* We need to ignore disconnect on suspend
 				 * otherwise tusb 2.0 won't reconnect after a
@@ -842,7 +815,6 @@ b_host:
 				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 				musb_g_reset(musb);
 				break;
-#endif
 			case OTG_STATE_B_IDLE:
 				musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 				/* FALLTHROUGH */
@@ -927,7 +899,6 @@ void musb_start(struct musb *musb)
 
 	/* put into basic highspeed mode and start session */
 	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
-						| MUSB_POWER_SOFTCONN
 						| MUSB_POWER_HSENAB
 						/* ENSUSPEND wedges tusb */
 						/* | MUSB_POWER_ENSUSPEND */
@@ -1038,10 +1009,15 @@ static void musb_shutdown(struct platform_device *pdev)
  * We don't currently use dynamic fifo setup capability to do anything
  * more than selecting one of a bunch of predefined configurations.
  */
-#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_OMAP2PLUS) \
-	|| defined(CONFIG_USB_MUSB_AM35X)
+#if defined(CONFIG_USB_MUSB_TUSB6010)			\
+	|| defined(CONFIG_USB_MUSB_TUSB6010_MODULE)	\
+	|| defined(CONFIG_USB_MUSB_OMAP2PLUS)		\
+	|| defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE)	\
+	|| defined(CONFIG_USB_MUSB_AM35X)		\
+	|| defined(CONFIG_USB_MUSB_AM35X_MODULE)
 static ushort __initdata fifo_mode = 4;
-#elif defined(CONFIG_USB_MUSB_UX500)
+#elif defined(CONFIG_USB_MUSB_UX500)			\
+	|| defined(CONFIG_USB_MUSB_UX500_MODULE)
 static ushort __initdata fifo_mode = 5;
 #else
 static ushort __initdata fifo_mode = 2;
@@ -1191,14 +1167,12 @@ fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
 	/* configure the FIFO */
 	musb_writeb(mbase, MUSB_INDEX, hw_ep->epnum);
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	/* EP0 reserved endpoint for control, bidirectional;
 	 * EP1 reserved for bulk, two unidirection halves.
 	 */
 	if (hw_ep->epnum == 1)
 		musb->bulk_ep = hw_ep;
 	/* REVISIT error check:  be sure ep0 can both rx and tx ... */
-#endif
 	switch (cfg->style) {
 	case FIFO_TX:
 		musb_write_txfifosz(mbase, c_size);
@@ -1317,12 +1291,10 @@ done:
 			n + 1, musb->config->num_eps * 2 - 1,
 			offset, (1 << (musb->config->ram_bits + 2)));
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	if (!musb->bulk_ep) {
 		pr_debug("%s: missing bulk\n", musb_driver_name);
 		return -EINVAL;
 	}
-#endif
 
 	return 0;
 }
@@ -1353,7 +1325,6 @@ static int __init ep_config_from_hw(struct musb *musb)
 
 		/* FIXME set up hw_ep->{rx,tx}_double_buffered */
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 		/* pick an RX/TX endpoint for bulk */
 		if (hw_ep->max_packet_sz_tx < 512
 				|| hw_ep->max_packet_sz_rx < 512)
@@ -1365,15 +1336,12 @@ static int __init ep_config_from_hw(struct musb *musb)
 		if (musb->bulk_ep)
 			continue;
 		musb->bulk_ep = hw_ep;
-#endif
 	}
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	if (!musb->bulk_ep) {
 		pr_debug("%s: missing bulk\n", musb_driver_name);
 		return -EINVAL;
 	}
-#endif
 
 	return 0;
 }
@@ -1429,13 +1397,11 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 	} else {
 		musb->is_multipoint = 0;
 		type = "";
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 #ifndef	CONFIG_USB_OTG_BLACKLIST_HUB
 		printk(KERN_ERR
 			"%s: kernel must blacklist external hubs\n",
 			musb_driver_name);
 #endif
-#endif
 	}
 
 	/* log release info */
@@ -1479,11 +1445,9 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 #endif
 
 		hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 		hw_ep->target_regs = musb_read_target_reg_base(i, mbase);
 		hw_ep->rx_reinit = 1;
 		hw_ep->tx_reinit = 1;
-#endif
 
 		if (hw_ep->max_packet_sz_tx) {
 			dev_dbg(musb->controller,
@@ -1561,14 +1525,6 @@ irqreturn_t musb_interrupt(struct musb *musb)
 		(devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral",
 		musb->int_usb, musb->int_tx, musb->int_rx);
 
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-	if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
-		if (!musb->gadget_driver) {
-			dev_dbg(musb->controller, "No gadget driver loaded\n");
-			return IRQ_HANDLED;
-		}
-#endif
-
 	/* the core can interrupt us for multiple reasons; docs have
 	 * a generic interrupt flowchart to follow
 	 */
@@ -1767,8 +1723,6 @@ musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf)
 }
 static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store);
 
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-
 /* Gadget drivers can't know that a host is connected so they might want
  * to start SRP, but users can.  This allows userspace to trigger SRP.
  */
@@ -1792,14 +1746,10 @@ musb_srp_store(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR(srp, 0644, NULL, musb_srp_store);
 
-#endif /* CONFIG_USB_GADGET_MUSB_HDRC */
-
 static struct attribute *musb_attributes[] = {
 	&dev_attr_mode.attr,
 	&dev_attr_vbus.attr,
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	&dev_attr_srp.attr,
-#endif
 	NULL
 };
 
@@ -1832,7 +1782,6 @@ allocate_instance(struct device *dev,
 	struct musb		*musb;
 	struct musb_hw_ep	*ep;
 	int			epnum;
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	struct usb_hcd	*hcd;
 
 	hcd = usb_create_hcd(&musb_hc_driver, dev, dev_name(dev));
@@ -1850,12 +1799,6 @@ allocate_instance(struct device *dev,
 
 	musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
 	musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
-#else
-	musb = kzalloc(sizeof *musb, GFP_KERNEL);
-	if (!musb)
-		return NULL;
-
-#endif
 	dev_set_drvdata(dev, musb);
 	musb->mregs = mbase;
 	musb->ctrl_base = mbase;
@@ -1885,9 +1828,7 @@ static void musb_free(struct musb *musb)
 	sysfs_remove_group(&musb->controller->kobj, &musb_attr_group);
 #endif
 
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	musb_gadget_cleanup(musb);
-#endif
 
 	if (musb->nIrq >= 0) {
 		if (musb->irq_wake)
@@ -1901,11 +1842,7 @@ static void musb_free(struct musb *musb)
 		dma_controller_destroy(c);
 	}
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-	usb_put_hcd(musb_to_hcd(musb));
-#else
 	kfree(musb);
-#endif
 }
 
 /*
@@ -2000,9 +1937,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	if (status < 0)
 		goto fail3;
 
-#ifdef CONFIG_USB_MUSB_OTG
 	setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
-#endif
 
 	/* Init IRQ workqueue before request_irq */
 	INIT_WORK(&musb->irq_work, musb_irq_work);
@@ -2214,7 +2149,16 @@ static void musb_save_context(struct musb *musb)
 	musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
 
 	for (i = 0; i < musb->config->num_eps; ++i) {
-		epio = musb->endpoints[i].regs;
+		struct musb_hw_ep	*hw_ep;
+
+		hw_ep = &musb->endpoints[i];
+		if (!hw_ep)
+			continue;
+
+		epio = hw_ep->regs;
+		if (!epio)
+			continue;
+
 		musb->context.index_regs[i].txmaxp =
 			musb_readw(epio, MUSB_TXMAXP);
 		musb->context.index_regs[i].txcsr =
@@ -2280,7 +2224,16 @@ static void musb_restore_context(struct musb *musb)
 	musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
 
 	for (i = 0; i < musb->config->num_eps; ++i) {
-		epio = musb->endpoints[i].regs;
+		struct musb_hw_ep	*hw_ep;
+
+		hw_ep = &musb->endpoints[i];
+		if (!hw_ep)
+			continue;
+
+		epio = hw_ep->regs;
+		if (!epio)
+			continue;
+
 		musb_writew(epio, MUSB_TXMAXP,
 			musb->context.index_regs[i].txmaxp);
 		musb_writew(epio, MUSB_TXCSR,
@@ -2329,13 +2282,13 @@ static void musb_restore_context(struct musb *musb)
 				musb->context.index_regs[i].rxhubport);
 		}
 	}
+	musb_writeb(musb_base, MUSB_INDEX, musb->context.index);
 }
 
 static int musb_suspend(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
+	struct musb	*musb = dev_to_musb(dev);
 	unsigned long	flags;
-	struct musb	*musb = dev_to_musb(&pdev->dev);
 
 	spin_lock_irqsave(&musb->lock, flags);
 
@@ -2357,8 +2310,7 @@ static int musb_suspend(struct device *dev)
 
 static int musb_resume_noirq(struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct musb	*musb = dev_to_musb(&pdev->dev);
+	struct musb	*musb = dev_to_musb(dev);
 
 	musb_restore_context(musb);
 
@@ -2426,34 +2378,13 @@ static struct platform_driver musb_driver = {
 
 static int __init musb_init(void)
 {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	if (usb_disabled())
 		return 0;
-#endif
 
 	pr_info("%s: version " MUSB_VERSION ", "
-#ifdef CONFIG_MUSB_PIO_ONLY
-		"pio"
-#elif defined(CONFIG_USB_TI_CPPI_DMA)
-		"cppi-dma"
-#elif defined(CONFIG_USB_INVENTRA_DMA)
-		"musb-dma"
-#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
-		"tusb-omap-dma"
-#elif defined(CONFIG_USB_UX500_DMA)
-		"ux500-dma"
-#else
 		"?dma?"
-#endif
 		", "
-#ifdef CONFIG_USB_MUSB_OTG
-		"otg (peripheral+host)"
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
-		"peripheral"
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
-		"host"
-#endif
-		,
+		"otg (peripheral+host)",
 		musb_driver_name);
 	return platform_driver_probe(&musb_driver, musb_probe);
 }
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 0e053b58796..668eeef601a 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -72,10 +72,6 @@ struct musb_ep;
 #include <linux/usb/hcd.h>
 #include "musb_host.h"
 
-
-
-#ifdef CONFIG_USB_MUSB_OTG
-
 #define	is_peripheral_enabled(musb)	((musb)->board_mode != MUSB_HOST)
 #define	is_host_enabled(musb)		((musb)->board_mode != MUSB_PERIPHERAL)
 #define	is_otg_enabled(musb)		((musb)->board_mode == MUSB_OTG)
@@ -86,24 +82,6 @@ struct musb_ep;
 #define is_peripheral_active(m)		(!(m)->is_host)
 #define is_host_active(m)		((m)->is_host)
 
-#else
-#define	is_peripheral_enabled(musb)	is_peripheral_capable()
-#define	is_host_enabled(musb)		is_host_capable()
-#define	is_otg_enabled(musb)		0
-
-#define	is_peripheral_active(musb)	is_peripheral_capable()
-#define	is_host_active(musb)		is_host_capable()
-#endif
-
-#if defined(CONFIG_USB_MUSB_OTG) || defined(CONFIG_USB_MUSB_PERIPHERAL)
-/* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always
- * override that choice selection (often USB_GADGET_DUMMY_HCD).
- */
-#ifndef CONFIG_USB_GADGET_MUSB_HDRC
-#error bogus Kconfig output ... select CONFIG_USB_GADGET_MUSB_HDRC
-#endif
-#endif	/* need MUSB gadget selection */
-
 #ifndef CONFIG_HAVE_CLK
 /* Dummy stub for clk framework */
 #define clk_get(dev, id)	NULL
@@ -119,8 +97,6 @@ struct musb_ep;
 
 /****************************** PERIPHERAL ROLE *****************************/
 
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-
 #define	is_peripheral_capable()	(1)
 
 extern irqreturn_t musb_g_ep0_irq(struct musb *);
@@ -132,40 +108,14 @@ extern void musb_g_resume(struct musb *);
 extern void musb_g_wakeup(struct musb *);
 extern void musb_g_disconnect(struct musb *);
 
-#else
-
-#define	is_peripheral_capable()	(0)
-
-static inline irqreturn_t musb_g_ep0_irq(struct musb *m) { return IRQ_NONE; }
-static inline void musb_g_reset(struct musb *m) {}
-static inline void musb_g_suspend(struct musb *m) {}
-static inline void musb_g_resume(struct musb *m) {}
-static inline void musb_g_wakeup(struct musb *m) {}
-static inline void musb_g_disconnect(struct musb *m) {}
-
-#endif
-
 /****************************** HOST ROLE ***********************************/
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-
 #define	is_host_capable()	(1)
 
 extern irqreturn_t musb_h_ep0_irq(struct musb *);
 extern void musb_host_tx(struct musb *, u8);
 extern void musb_host_rx(struct musb *, u8);
 
-#else
-
-#define	is_host_capable()	(0)
-
-static inline irqreturn_t musb_h_ep0_irq(struct musb *m) { return IRQ_NONE; }
-static inline void musb_host_tx(struct musb *m, u8 e) {}
-static inline void musb_host_rx(struct musb *m, u8 e) {}
-
-#endif
-
-
 /****************************** CONSTANTS ********************************/
 
 #ifndef MUSB_C_NUM_EPS
@@ -261,7 +211,7 @@ enum musb_g_ep0_state {
  * @try_ilde:	tries to idle the IP
  * @vbus_status: returns vbus status if possible
  * @set_vbus:	forces vbus status
- * @channel_program: pre check for standard dma channel_program func
+ * @adjust_channel_params: pre check for standard dma channel_program func
  */
 struct musb_platform_ops {
 	int	(*init)(struct musb *musb);
@@ -315,7 +265,6 @@ struct musb_hw_ep {
 	void __iomem		*fifo_sync_va;
 #endif
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	void __iomem		*target_regs;
 
 	/* currently scheduled peripheral endpoint */
@@ -324,31 +273,20 @@ struct musb_hw_ep {
 
 	u8			rx_reinit;
 	u8			tx_reinit;
-#endif
 
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	/* peripheral side */
 	struct musb_ep		ep_in;			/* TX */
 	struct musb_ep		ep_out;			/* RX */
-#endif
 };
 
 static inline struct musb_request *next_in_request(struct musb_hw_ep *hw_ep)
 {
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	return next_request(&hw_ep->ep_in);
-#else
-	return NULL;
-#endif
 }
 
 static inline struct musb_request *next_out_request(struct musb_hw_ep *hw_ep)
 {
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	return next_request(&hw_ep->ep_out);
-#else
-	return NULL;
-#endif
 }
 
 struct musb_csr_regs {
@@ -393,7 +331,6 @@ struct musb {
 
 	u32			port1_status;
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	unsigned long		rh_timer;
 
 	enum musb_h_ep0_state	ep0_stage;
@@ -411,7 +348,6 @@ struct musb {
 	struct list_head	out_bulk;	/* of musb_qh */
 
 	struct timer_list	otg_timer;
-#endif
 	struct notifier_block	nb;
 
 	struct dma_controller	*dma_controller;
@@ -472,7 +408,6 @@ struct musb {
 #define	can_bulk_combine(musb,type) \
 	(((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine)
 
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	/* is_suspended means USB B_PERIPHERAL suspend */
 	unsigned		is_suspended:1;
 
@@ -496,7 +431,6 @@ struct musb {
 	enum musb_g_ep0_state	ep0_state;
 	struct usb_gadget	g;			/* the gadget */
 	struct usb_gadget_driver *gadget_driver;	/* its driver */
-#endif
 
 	/*
 	 * FIXME: Remove this flag.
@@ -518,12 +452,10 @@ struct musb {
 #endif
 };
 
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 static inline struct musb *gadget_to_musb(struct usb_gadget *g)
 {
 	return container_of(g, struct musb, g);
 }
-#endif
 
 #ifdef CONFIG_BLACKFIN
 static inline int musb_read_fifosize(struct musb *musb,
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 6aeb363e63e..b67a062f556 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1663,8 +1663,8 @@ static void musb_pullup(struct musb *musb, int is_on)
 
 	/* FIXME if on, HdrcStart; if off, HdrcStop */
 
-	dev_dbg(musb->controller, "gadget %s D+ pullup %s\n",
-		musb->gadget_driver->function, is_on ? "on" : "off");
+	dev_dbg(musb->controller, "gadget D+ pullup %s\n",
+		is_on ? "on" : "off");
 	musb_writeb(musb->mregs, MUSB_POWER, power);
 }
 
@@ -1710,6 +1710,11 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
 	return 0;
 }
 
+static int musb_gadget_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int musb_gadget_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+
 static const struct usb_gadget_ops musb_gadget_operations = {
 	.get_frame		= musb_gadget_get_frame,
 	.wakeup			= musb_gadget_wakeup,
@@ -1717,6 +1722,8 @@ static const struct usb_gadget_ops musb_gadget_operations = {
 	/* .vbus_session		= musb_gadget_vbus_session, */
 	.vbus_draw		= musb_gadget_vbus_draw,
 	.pullup			= musb_gadget_pullup,
+	.udc_start		= musb_gadget_start,
+	.udc_stop		= musb_gadget_stop,
 };
 
 /* ----------------------------------------------------------------------- */
@@ -1727,7 +1734,6 @@ static const struct usb_gadget_ops musb_gadget_operations = {
  * about there being only one external upstream port.  It assumes
  * all peripheral ports are external...
  */
-static struct musb *the_gadget;
 
 static void musb_gadget_release(struct device *dev)
 {
@@ -1814,9 +1820,6 @@ int __init musb_gadget_setup(struct musb *musb)
 	 * musb peripherals at the same time, only the bus lock
 	 * is probably held.
 	 */
-	if (the_gadget)
-		return -EBUSY;
-	the_gadget = musb;
 
 	musb->g.ops = &musb_gadget_operations;
 	musb->g.is_dualspeed = 1;
@@ -1840,18 +1843,22 @@ int __init musb_gadget_setup(struct musb *musb)
 	status = device_register(&musb->g.dev);
 	if (status != 0) {
 		put_device(&musb->g.dev);
-		the_gadget = NULL;
+		return status;
 	}
+	status = usb_add_gadget_udc(musb->controller, &musb->g);
+	if (status)
+		goto err;
+
+	return 0;
+err:
+	device_unregister(&musb->g.dev);
 	return status;
 }
 
 void musb_gadget_cleanup(struct musb *musb)
 {
-	if (musb != the_gadget)
-		return;
-
+	usb_del_gadget_udc(&musb->g);
 	device_unregister(&musb->g.dev);
-	the_gadget = NULL;
 }
 
 /*
@@ -1863,59 +1870,30 @@ void musb_gadget_cleanup(struct musb *musb)
  * -ENOMEM no memory to perform the operation
  *
  * @param driver the gadget driver
- * @param bind the driver's bind function
  * @return <0 if error, 0 if everything is fine
  */
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *))
+static int musb_gadget_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
 {
-	struct musb		*musb = the_gadget;
+	struct musb		*musb = gadget_to_musb(g);
 	unsigned long		flags;
 	int			retval = -EINVAL;
 
-	if (!driver
-			|| driver->speed != USB_SPEED_HIGH
-			|| !bind || !driver->setup)
-		goto err0;
-
-	/* driver must be initialized to support peripheral mode */
-	if (!musb) {
-		dev_dbg(musb->controller, "no dev??\n");
-		retval = -ENODEV;
+	if (driver->speed != USB_SPEED_HIGH)
 		goto err0;
-	}
 
 	pm_runtime_get_sync(musb->controller);
 
 	dev_dbg(musb->controller, "registering driver %s\n", driver->function);
 
-	if (musb->gadget_driver) {
-		dev_dbg(musb->controller, "%s is already bound to %s\n",
-				musb_driver_name,
-				musb->gadget_driver->driver.name);
-		retval = -EBUSY;
-		goto err0;
-	}
-
-	spin_lock_irqsave(&musb->lock, flags);
+	musb->softconnect = 0;
 	musb->gadget_driver = driver;
-	musb->g.dev.driver = &driver->driver;
-	driver->driver.bus = NULL;
-	musb->softconnect = 1;
-	spin_unlock_irqrestore(&musb->lock, flags);
-
-	retval = bind(&musb->g);
-	if (retval) {
-		dev_dbg(musb->controller, "bind to driver %s failed --> %d\n",
-				driver->driver.name, retval);
-		goto err1;
-	}
 
 	spin_lock_irqsave(&musb->lock, flags);
+	musb->is_active = 1;
 
 	otg_set_peripheral(musb->xceiv, &musb->g);
 	musb->xceiv->state = OTG_STATE_B_IDLE;
-	musb->is_active = 1;
 
 	/*
 	 * FIXME this ignores the softconnect flag.  Drivers are
@@ -1927,8 +1905,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	if (!is_otg_enabled(musb))
 		musb_start(musb);
 
-	otg_set_peripheral(musb->xceiv, &musb->g);
-
 	spin_unlock_irqrestore(&musb->lock, flags);
 
 	if (is_otg_enabled(musb)) {
@@ -1960,15 +1936,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 err2:
 	if (!is_otg_enabled(musb))
 		musb_stop(musb);
-
-err1:
-	musb->gadget_driver = NULL;
-	musb->g.dev.driver = NULL;
-
 err0:
 	return retval;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
 static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
 {
@@ -2018,17 +1988,12 @@ static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
  *
  * @param driver the gadget driver to unregister
  */
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int musb_gadget_stop(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
 {
-	struct musb	*musb = the_gadget;
+	struct musb	*musb = gadget_to_musb(g);
 	unsigned long	flags;
 
-	if (!driver || !driver->unbind || !musb)
-		return -EINVAL;
-
-	if (!musb->gadget_driver)
-		return -EINVAL;
-
 	if (musb->xceiv->last_event == USB_EVENT_NONE)
 		pm_runtime_get_sync(musb->controller);
 
@@ -2039,9 +2004,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	spin_lock_irqsave(&musb->lock, flags);
 
-#ifdef	CONFIG_USB_MUSB_OTG
 	musb_hnp_stop(musb);
-#endif
 
 	(void) musb_gadget_vbus_draw(&musb->g, 0);
 
@@ -2051,13 +2014,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	dev_dbg(musb->controller, "unregistering driver %s\n", driver->function);
 
-	spin_unlock_irqrestore(&musb->lock, flags);
-	driver->unbind(&musb->g);
-	spin_lock_irqsave(&musb->lock, flags);
-
-	musb->gadget_driver = NULL;
-	musb->g.dev.driver = NULL;
-
 	musb->is_active = 0;
 	musb_platform_try_idle(musb, 0);
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -2077,8 +2033,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
-
 
 /* ----------------------------------------------------------------------- */
 
@@ -2164,7 +2118,6 @@ void musb_g_disconnect(struct musb *musb)
 
 	switch (musb->xceiv->state) {
 	default:
-#ifdef	CONFIG_USB_MUSB_OTG
 		dev_dbg(musb->controller, "Unhandled disconnect %s, setting a_idle\n",
 			otg_state_string(musb->xceiv->state));
 		musb->xceiv->state = OTG_STATE_A_IDLE;
@@ -2176,7 +2129,6 @@ void musb_g_disconnect(struct musb *musb)
 		break;
 	case OTG_STATE_B_WAIT_ACON:
 	case OTG_STATE_B_HOST:
-#endif
 	case OTG_STATE_B_PERIPHERAL:
 	case OTG_STATE_B_IDLE:
 		musb->xceiv->state = OTG_STATE_B_IDLE;
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index b2faff23550..9378b359c1f 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -88,7 +88,6 @@ static int service_tx_status_request(
 	case USB_RECIP_DEVICE:
 		result[0] = musb->is_self_powered << USB_DEVICE_SELF_POWERED;
 		result[0] |= musb->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
-#ifdef CONFIG_USB_MUSB_OTG
 		if (musb->g.is_otg) {
 			result[0] |= musb->g.b_hnp_enable
 				<< USB_DEVICE_B_HNP_ENABLE;
@@ -97,7 +96,6 @@ static int service_tx_status_request(
 			result[0] |= musb->g.a_hnp_support
 				<< USB_DEVICE_A_HNP_SUPPORT;
 		}
-#endif
 		break;
 
 	case USB_RECIP_INTERFACE:
@@ -392,7 +390,6 @@ __acquires(musb->lock)
 					if (handled > 0)
 						musb->test_mode = true;
 					break;
-#ifdef CONFIG_USB_MUSB_OTG
 				case USB_DEVICE_B_HNP_ENABLE:
 					if (!musb->g.is_otg)
 						goto stall;
@@ -409,7 +406,6 @@ __acquires(musb->lock)
 						goto stall;
 					musb->g.a_alt_hnp_support = 1;
 					break;
-#endif
 				case USB_DEVICE_DEBUG_MODE:
 					handled = 0;
 					break;
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 14b00776638..622d09fb9ab 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -95,7 +95,6 @@ extern const struct hc_driver musb_hc_driver;
 
 static inline struct urb *next_urb(struct musb_qh *qh)
 {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	struct list_head	*queue;
 
 	if (!qh)
@@ -104,9 +103,6 @@ static inline struct urb *next_urb(struct musb_qh *qh)
 	if (list_empty(queue))
 		return NULL;
 	return list_entry(queue->next, struct urb, urb_list);
-#else
-	return NULL;
-#endif
 }
 
 #endif				/* _MUSB_HOST_H */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 2d80a575883..e9f80adc45a 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -88,14 +88,12 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
 						OTG_TIME_A_AIDL_BDIS));
 			musb_platform_try_idle(musb, 0);
 			break;
-#ifdef	CONFIG_USB_MUSB_OTG
 		case OTG_STATE_B_HOST:
 			musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
 			musb->is_active = is_otg_enabled(musb)
 					&& musb->xceiv->host->b_hnp_enable;
 			musb_platform_try_idle(musb, 0);
 			break;
-#endif
 		default:
 			dev_dbg(musb->controller, "bogus rh suspend? %s\n",
 				otg_state_string(musb->xceiv->state));
@@ -118,13 +116,11 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
 	u8		power;
 	void __iomem	*mbase = musb->mregs;
 
-#ifdef CONFIG_USB_MUSB_OTG
 	if (musb->xceiv->state == OTG_STATE_B_IDLE) {
 		dev_dbg(musb->controller, "HNP: Returning from HNP; no hub reset from b_idle\n");
 		musb->port1_status &= ~USB_PORT_STAT_RESET;
 		return;
 	}
-#endif
 
 	if (!is_host_active(musb))
 		return;
@@ -191,14 +187,12 @@ void musb_root_disconnect(struct musb *musb)
 
 	switch (musb->xceiv->state) {
 	case OTG_STATE_A_SUSPEND:
-#ifdef	CONFIG_USB_MUSB_OTG
 		if (is_otg_enabled(musb)
 				&& musb->xceiv->host->b_hnp_enable) {
 			musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
 			musb->g.is_a_peripheral = 1;
 			break;
 		}
-#endif
 		/* FALLTHROUGH */
 	case OTG_STATE_A_HOST:
 		musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index c5d4c44d0ff..ba85f273e48 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -51,9 +51,7 @@ static void musb_do_idle(unsigned long _musb)
 {
 	struct musb	*musb = (void *)_musb;
 	unsigned long	flags;
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	u8	power;
-#endif
 	u8	devctl;
 
 	spin_lock_irqsave(&musb->lock, flags);
@@ -70,7 +68,6 @@ static void musb_do_idle(unsigned long _musb)
 			MUSB_HST_MODE(musb);
 		}
 		break;
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	case OTG_STATE_A_SUSPEND:
 		/* finish RESUME signaling? */
 		if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
@@ -87,15 +84,12 @@ static void musb_do_idle(unsigned long _musb)
 			musb->xceiv->state = OTG_STATE_A_HOST;
 		}
 		break;
-#endif
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	case OTG_STATE_A_HOST:
 		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 		if (devctl &  MUSB_DEVCTL_BDEVICE)
 			musb->xceiv->state = OTG_STATE_B_IDLE;
 		else
 			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
-#endif
 	default:
 		break;
 	}
@@ -243,13 +237,11 @@ static int musb_otg_notifications(struct notifier_block *nb,
 		dev_dbg(musb->controller, "ID GND\n");
 
 		if (is_otg_enabled(musb)) {
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 			if (musb->gadget_driver) {
 				pm_runtime_get_sync(musb->controller);
 				otg_init(musb->xceiv);
 				omap2430_musb_set_vbus(musb, 1);
 			}
-#endif
 		} else {
 			pm_runtime_get_sync(musb->controller);
 			otg_init(musb->xceiv);
@@ -260,21 +252,16 @@ static int musb_otg_notifications(struct notifier_block *nb,
 	case USB_EVENT_VBUS:
 		dev_dbg(musb->controller, "VBUS Connect\n");
 
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 		if (musb->gadget_driver)
 			pm_runtime_get_sync(musb->controller);
-#endif
 		otg_init(musb->xceiv);
 		break;
 
 	case USB_EVENT_NONE:
 		dev_dbg(musb->controller, "VBUS Disconnect\n");
 
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 		if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
-			if (musb->gadget_driver)
-#endif
-			{
+			if (musb->gadget_driver) {
 				pm_runtime_mark_last_busy(musb->controller);
 				pm_runtime_put_autosuspend(musb->controller);
 			}
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index b410357cf01..9eec41fbf3a 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -269,8 +269,6 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
 
 static struct musb *the_musb;
 
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-
 /* This is used by gadget drivers, and OTG transceiver logic, allowing
  * at most mA current to be drawn from VBUS during a Default-B session
  * (that is, while VBUS exceeds 4.4V).  In Default-A (including pure host
@@ -310,10 +308,6 @@ static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
 	return 0;
 }
 
-#else
-#define tusb_draw_power	NULL
-#endif
-
 /* workaround for issue 13:  change clock during chip idle
  * (to be fixed in rev3 silicon) ... symptoms include disconnect
  * or looping suspend/resume cycles
@@ -440,19 +434,15 @@ static void musb_do_idle(unsigned long _musb)
 		if (is_host_active(musb) && (musb->port1_status >> 16))
 			goto done;
 
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-		if (is_peripheral_enabled(musb) && !musb->gadget_driver)
+		if (is_peripheral_enabled(musb) && !musb->gadget_driver) {
 			wakeups = 0;
-		else {
+		} else {
 			wakeups = TUSB_PRCM_WHOSTDISCON
-					| TUSB_PRCM_WBUS
+				| TUSB_PRCM_WBUS
 					| TUSB_PRCM_WVBUS;
 			if (is_otg_enabled(musb))
 				wakeups |= TUSB_PRCM_WID;
 		}
-#else
-		wakeups = TUSB_PRCM_WHOSTDISCON | TUSB_PRCM_WBUS;
-#endif
 		tusb_allow_idle(musb, wakeups);
 	}
 done:
@@ -610,30 +600,22 @@ static int tusb_musb_set_mode(struct musb *musb, u8 musb_mode)
 
 	switch (musb_mode) {
 
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 	case MUSB_HOST:		/* Disable PHY ID detect, ground ID */
 		phy_otg_ctrl &= ~TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
 		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
 		dev_conf |= TUSB_DEV_CONF_ID_SEL;
 		dev_conf &= ~TUSB_DEV_CONF_SOFT_ID;
 		break;
-#endif
-
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 	case MUSB_PERIPHERAL:	/* Disable PHY ID detect, keep ID pull-up on */
 		phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
 		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
 		dev_conf |= (TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
 		break;
-#endif
-
-#ifdef CONFIG_USB_MUSB_OTG
 	case MUSB_OTG:		/* Use PHY ID detection */
 		phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
 		phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
 		dev_conf &= ~(TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
 		break;
-#endif
 
 	default:
 		dev_dbg(musb->controller, "Trying to set mode %i\n", musb_mode);
@@ -684,7 +666,6 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 		/* B-dev state machine:  no vbus ~= disconnect */
 		if ((is_otg_enabled(musb) && !musb->xceiv->default_a)
 				|| !is_host_enabled(musb)) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
 			/* ? musb_root_disconnect(musb); */
 			musb->port1_status &=
 				~(USB_PORT_STAT_CONNECTION
@@ -693,7 +674,6 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 				| USB_PORT_STAT_HIGH_SPEED
 				| USB_PORT_STAT_TEST
 				);
-#endif
 
 			if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
 				dev_dbg(musb->controller, "Forcing disconnect (no interrupt)\n");
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index cfb5aa72b19..b4d2c0972b3 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -95,11 +95,15 @@ struct twl6030_usb {
 
 	struct regulator		*usb3v3;
 
+	/* used to set vbus, in atomic path */
+	struct work_struct	set_vbus_work;
+
 	int			irq1;
 	int			irq2;
 	u8			linkstat;
 	u8			asleep;
 	bool			irq_enabled;
+	bool			vbus_enable;
 	unsigned long		features;
 };
 
@@ -370,20 +374,31 @@ static int twl6030_enable_irq(struct otg_transceiver *x)
 	return 0;
 }
 
-static int twl6030_set_vbus(struct otg_transceiver *x, bool enabled)
+static void otg_set_vbus_work(struct work_struct *data)
 {
-	struct twl6030_usb *twl = xceiv_to_twl(x);
+	struct twl6030_usb *twl = container_of(data, struct twl6030_usb,
+								set_vbus_work);
 
 	/*
 	 * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
 	 * register. This enables boost mode.
 	 */
-	if (enabled)
+
+	if (twl->vbus_enable)
 		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40,
-						CHARGERUSB_CTRL1);
-	 else
+							CHARGERUSB_CTRL1);
+	else
 		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00,
-						CHARGERUSB_CTRL1);
+							CHARGERUSB_CTRL1);
+}
+
+static int twl6030_set_vbus(struct otg_transceiver *x, bool enabled)
+{
+	struct twl6030_usb *twl = xceiv_to_twl(x);
+
+	twl->vbus_enable = enabled;
+	schedule_work(&twl->set_vbus_work);
+
 	return 0;
 }
 
@@ -444,6 +459,8 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
 
 	ATOMIC_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
 
+	INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
+
 	twl->irq_enabled = true;
 	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
@@ -494,6 +511,7 @@ static int __exit twl6030_usb_remove(struct platform_device *pdev)
 	regulator_put(twl->usb3v3);
 	pdata->phy_exit(twl->dev);
 	device_remove_file(twl->dev, &dev_attr_vbus);
+	cancel_work_sync(&twl->set_vbus_work);
 	kfree(twl);
 
 	return 0;
diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig
index b2e64918884..286cbf1ca7d 100644
--- a/drivers/usb/renesas_usbhs/Kconfig
+++ b/drivers/usb/renesas_usbhs/Kconfig
@@ -1,5 +1,5 @@
 #
-# Renesas USB Controller Drivers
+# Renesas USBHS Controller Drivers
 #
 
 config USB_RENESAS_USBHS
@@ -7,10 +7,9 @@ config USB_RENESAS_USBHS
 	depends on SUPERH || ARCH_SHMOBILE
 	default n
 	help
-	   Renesas USBHS is a discrete USB host and peripheral controller chip
-	   that supports both full and high speed USB 2.0 data transfers.
-	   It has nine or more configurable endpoints, and endpoint zero.
+	  Renesas USBHS is a discrete USB host and peripheral controller chip
+	  that supports both full and high speed USB 2.0 data transfers.
+	  It has nine or more configurable endpoints, and endpoint zero.
 
-	   Say "y" to link the driver statically, or "m" to build a
-	   dynamically linked module called "renesas_usbhs" and force all
-	   gadget drivers to also be dynamically linked.
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "renesas_usbhs"
diff --git a/drivers/usb/renesas_usbhs/Makefile b/drivers/usb/renesas_usbhs/Makefile
index b8798ad1627..ce08345fa15 100644
--- a/drivers/usb/renesas_usbhs/Makefile
+++ b/drivers/usb/renesas_usbhs/Makefile
@@ -4,6 +4,6 @@
 
 obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs.o
 
-renesas_usbhs-y			:= common.o mod.o pipe.o
+renesas_usbhs-y			:= common.o mod.o pipe.o fifo.o
 
 renesas_usbhs-$(CONFIG_USB_RENESAS_USBHS_UDC)	+= mod_gadget.o
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index f3664d6af66..d8239e5efa6 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -21,6 +21,29 @@
 #include <linux/sysfs.h>
 #include "./common.h"
 
+/*
+ *		image of renesas_usbhs
+ *
+ * ex) gadget case
+
+ * mod.c
+ * mod_gadget.c
+ * mod_host.c		pipe.c		fifo.c
+ *
+ *			+-------+	+-----------+
+ *			| pipe0 |------>| fifo pio  |
+ * +------------+	+-------+	+-----------+
+ * | mod_gadget |=====> | pipe1 |--+
+ * +------------+	+-------+  |	+-----------+
+ *			| pipe2 |  |  +-| fifo dma0 |
+ * +------------+	+-------+  |  |	+-----------+
+ * | mod_host   |	| pipe3 |<-|--+
+ * +------------+	+-------+  |	+-----------+
+ *			| ....  |  +--->| fifo dma1 |
+ *			| ....  |	+-----------+
+ */
+
+
 #define USBHSF_RUNTIME_PWCTRL	(1 << 0)
 
 /* status */
@@ -304,6 +327,8 @@ static int __devinit usbhs_probe(struct platform_device *pdev)
 		priv->dparam->pipe_type = usbhsc_default_pipe_type;
 		priv->dparam->pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type);
 	}
+	if (!priv->dparam->pio_dma_border)
+		priv->dparam->pio_dma_border = 64; /* 64byte */
 
 	/* FIXME */
 	/* runtime power control ? */
@@ -323,10 +348,14 @@ static int __devinit usbhs_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto probe_end_iounmap;
 
-	ret = usbhs_mod_probe(priv);
+	ret = usbhs_fifo_probe(priv);
 	if (ret < 0)
 		goto probe_end_pipe_exit;
 
+	ret = usbhs_mod_probe(priv);
+	if (ret < 0)
+		goto probe_end_fifo_exit;
+
 	/* dev_set_drvdata should be called after usbhs_mod_init */
 	dev_set_drvdata(&pdev->dev, priv);
 
@@ -374,6 +403,8 @@ probe_end_call_remove:
 	usbhs_platform_call(priv, hardware_exit, pdev);
 probe_end_mod_exit:
 	usbhs_mod_remove(priv);
+probe_end_fifo_exit:
+	usbhs_fifo_remove(priv);
 probe_end_pipe_exit:
 	usbhs_pipe_remove(priv);
 probe_end_iounmap:
@@ -404,6 +435,7 @@ static int __devexit usbhs_remove(struct platform_device *pdev)
 
 	usbhs_platform_call(priv, hardware_exit, pdev);
 	usbhs_mod_remove(priv);
+	usbhs_fifo_remove(priv);
 	usbhs_pipe_remove(priv);
 	iounmap(priv->base);
 	kfree(priv);
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index 0aadcb40276..b410463a121 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -36,6 +36,12 @@ struct usbhs_priv;
 #define CFIFO		0x0014
 #define CFIFOSEL	0x0020
 #define CFIFOCTR	0x0022
+#define D0FIFO		0x0100
+#define D0FIFOSEL	0x0028
+#define D0FIFOCTR	0x002A
+#define D1FIFO		0x0120
+#define D1FIFOSEL	0x002C
+#define D1FIFOCTR	0x002E
 #define INTENB0		0x0030
 #define INTENB1		0x0032
 #define BRDYENB		0x0036
@@ -60,6 +66,30 @@ struct usbhs_priv;
 #define PIPEMAXP	0x006C
 #define PIPEPERI	0x006E
 #define PIPEnCTR	0x0070
+#define PIPE1TRE	0x0090
+#define PIPE1TRN	0x0092
+#define PIPE2TRE	0x0094
+#define PIPE2TRN	0x0096
+#define PIPE3TRE	0x0098
+#define PIPE3TRN	0x009A
+#define PIPE4TRE	0x009C
+#define PIPE4TRN	0x009E
+#define PIPE5TRE	0x00A0
+#define PIPE5TRN	0x00A2
+#define PIPEBTRE	0x00A4
+#define PIPEBTRN	0x00A6
+#define PIPECTRE	0x00A8
+#define PIPECTRN	0x00AA
+#define PIPEDTRE	0x00AC
+#define PIPEDTRN	0x00AE
+#define PIPEETRE	0x00B0
+#define PIPEETRN	0x00B2
+#define PIPEFTRE	0x00B4
+#define PIPEFTRN	0x00B6
+#define PIPE9TRE	0x00B8
+#define PIPE9TRN	0x00BA
+#define PIPEATRE	0x00BC
+#define PIPEATRN	0x00BE
 
 /* SYSCFG */
 #define SCKE	(1 << 10)	/* USB Module Clock Enable */
@@ -78,6 +108,7 @@ struct usbhs_priv;
 #define  RHST_HIGH_SPEED 3	/* High-speed connection */
 
 /* CFIFOSEL */
+#define DREQE	(1 << 12)	/* DMA Transfer Request Enable */
 #define MBW_32	(0x2 << 10)	/* CFIFO Port Access Bit Width */
 
 /* CFIFOCTR */
@@ -164,6 +195,10 @@ struct usbhs_priv;
 
 #define CCPL		(1 << 2)	/* Control Transfer End Enable */
 
+/* PIPEnTRE */
+#define TRENB		(1 << 9)	/* Transaction Counter Enable */
+#define TRCLR		(1 << 8)	/* Transaction Counter Clear */
+
 /* FRMNUM */
 #define FRNM_MASK	(0x7FF)
 
@@ -194,6 +229,11 @@ struct usbhs_priv {
 	 * pipe control
 	 */
 	struct usbhs_pipe_info pipe_info;
+
+	/*
+	 * fifo control
+	 */
+	struct usbhs_fifo_info fifo_info;
 };
 
 /*
@@ -204,6 +244,10 @@ void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data);
 void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data);
 
 int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev);
+
+#define usbhs_lock(p, f) spin_lock_irqsave(usbhs_priv_to_lock(p), f)
+#define usbhs_unlock(p, f) spin_unlock_irqrestore(usbhs_priv_to_lock(p), f)
+
 /*
  * sysconfig
  */
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
new file mode 100644
index 00000000000..406893e4422
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -0,0 +1,1015 @@
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include "./common.h"
+#include "./pipe.h"
+
+#define usbhsf_get_cfifo(p)	(&((p)->fifo_info.cfifo))
+#define usbhsf_get_d0fifo(p)	(&((p)->fifo_info.d0fifo))
+#define usbhsf_get_d1fifo(p)	(&((p)->fifo_info.d1fifo))
+
+#define usbhsf_fifo_is_busy(f)	((f)->pipe) /* see usbhs_pipe_select_fifo */
+
+/*
+ *		packet initialize
+ */
+void usbhs_pkt_init(struct usbhs_pkt *pkt)
+{
+	pkt->dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&pkt->node);
+}
+
+/*
+ *		packet control function
+ */
+static int usbhsf_null_handle(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+
+	dev_err(dev, "null handler\n");
+
+	return -EINVAL;
+}
+
+static struct usbhs_pkt_handle usbhsf_null_handler = {
+	.prepare = usbhsf_null_handle,
+	.try_run = usbhsf_null_handle,
+};
+
+void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt,
+		    struct usbhs_pkt_handle *handler,
+		    void *buf, int len, int zero)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	unsigned long flags;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	if (!handler) {
+		dev_err(dev, "no handler function\n");
+		handler = &usbhsf_null_handler;
+	}
+
+	list_del_init(&pkt->node);
+	list_add_tail(&pkt->node, &pipe->list);
+
+	pkt->pipe	= pipe;
+	pkt->buf	= buf;
+	pkt->handler	= handler;
+	pkt->length	= len;
+	pkt->zero	= zero;
+	pkt->actual	= 0;
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	usbhs_pkt_start(pipe);
+}
+
+static void __usbhsf_pkt_del(struct usbhs_pkt *pkt)
+{
+	list_del_init(&pkt->node);
+}
+
+static struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
+{
+	if (list_empty(&pipe->list))
+		return NULL;
+
+	return list_entry(pipe->list.next, struct usbhs_pkt, node);
+}
+
+struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	unsigned long flags;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	if (!pkt)
+		pkt = __usbhsf_pkt_get(pipe);
+
+	if (pkt)
+		__usbhsf_pkt_del(pkt);
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	return pkt;
+}
+
+int __usbhs_pkt_handler(struct usbhs_pipe *pipe, int type)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
+	struct usbhs_pkt *pkt;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int (*func)(struct usbhs_pkt *pkt, int *is_done);
+	unsigned long flags;
+	int ret = 0;
+	int is_done = 0;
+
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
+
+	pkt = __usbhsf_pkt_get(pipe);
+	if (!pkt)
+		goto __usbhs_pkt_handler_end;
+
+	switch (type) {
+	case USBHSF_PKT_PREPARE:
+		func = pkt->handler->prepare;
+		break;
+	case USBHSF_PKT_TRY_RUN:
+		func = pkt->handler->try_run;
+		break;
+	case USBHSF_PKT_DMA_DONE:
+		func = pkt->handler->dma_done;
+		break;
+	default:
+		dev_err(dev, "unknown pkt hander\n");
+		goto __usbhs_pkt_handler_end;
+	}
+
+	ret = func(pkt, &is_done);
+
+	if (is_done)
+		__usbhsf_pkt_del(pkt);
+
+__usbhs_pkt_handler_end:
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ******************/
+
+	if (is_done) {
+		info->done(pkt);
+		usbhs_pkt_start(pipe);
+	}
+
+	return ret;
+}
+
+/*
+ *		irq enable/disable function
+ */
+#define usbhsf_irq_empty_ctrl(p, e) usbhsf_irq_callback_ctrl(p, bempsts, e)
+#define usbhsf_irq_ready_ctrl(p, e) usbhsf_irq_callback_ctrl(p, brdysts, e)
+#define usbhsf_irq_callback_ctrl(pipe, status, enable)			\
+	({								\
+		struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);	\
+		struct usbhs_mod *mod = usbhs_mod_get_current(priv);	\
+		u16 status = (1 << usbhs_pipe_number(pipe));		\
+		if (!mod)						\
+			return;						\
+		if (enable)						\
+			mod->irq_##status |= status;			\
+		else							\
+			mod->irq_##status &= ~status;			\
+		usbhs_irq_callback_update(priv, mod);			\
+	})
+
+static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable)
+{
+	/*
+	 * And DCP pipe can NOT use "ready interrupt" for "send"
+	 * it should use "empty" interrupt.
+	 * see
+	 *   "Operation" - "Interrupt Function" - "BRDY Interrupt"
+	 *
+	 * on the other hand, normal pipe can use "ready interrupt" for "send"
+	 * even though it is single/double buffer
+	 */
+	if (usbhs_pipe_is_dcp(pipe))
+		usbhsf_irq_empty_ctrl(pipe, enable);
+	else
+		usbhsf_irq_ready_ctrl(pipe, enable);
+}
+
+static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable)
+{
+	usbhsf_irq_ready_ctrl(pipe, enable);
+}
+
+/*
+ *		FIFO ctrl
+ */
+static void usbhsf_send_terminator(struct usbhs_pipe *pipe,
+				   struct usbhs_fifo *fifo)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	usbhs_bset(priv, fifo->ctr, BVAL, BVAL);
+}
+
+static int usbhsf_fifo_barrier(struct usbhs_priv *priv,
+			       struct usbhs_fifo *fifo)
+{
+	int timeout = 1024;
+
+	do {
+		/* The FIFO port is accessible */
+		if (usbhs_read(priv, fifo->ctr) & FRDY)
+			return 0;
+
+		udelay(10);
+	} while (timeout--);
+
+	return -EBUSY;
+}
+
+static void usbhsf_fifo_clear(struct usbhs_pipe *pipe,
+			      struct usbhs_fifo *fifo)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	if (!usbhs_pipe_is_dcp(pipe))
+		usbhsf_fifo_barrier(priv, fifo);
+
+	usbhs_write(priv, fifo->ctr, BCLR);
+}
+
+static int usbhsf_fifo_rcv_len(struct usbhs_priv *priv,
+			       struct usbhs_fifo *fifo)
+{
+	return usbhs_read(priv, fifo->ctr) & DTLN_MASK;
+}
+
+static void usbhsf_fifo_unselect(struct usbhs_pipe *pipe,
+				 struct usbhs_fifo *fifo)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	usbhs_pipe_select_fifo(pipe, NULL);
+	usbhs_write(priv, fifo->sel, 0);
+}
+
+static int usbhsf_fifo_select(struct usbhs_pipe *pipe,
+			      struct usbhs_fifo *fifo,
+			      int write)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int timeout = 1024;
+	u16 mask = ((1 << 5) | 0xF);		/* mask of ISEL | CURPIPE */
+	u16 base = usbhs_pipe_number(pipe);	/* CURPIPE */
+
+	if (usbhs_pipe_is_busy(pipe) ||
+	    usbhsf_fifo_is_busy(fifo))
+		return -EBUSY;
+
+	if (usbhs_pipe_is_dcp(pipe))
+		base |= (1 == write) << 5;	/* ISEL */
+
+	/* "base" will be used below  */
+	usbhs_write(priv, fifo->sel, base | MBW_32);
+
+	/* check ISEL and CURPIPE value */
+	while (timeout--) {
+		if (base == (mask & usbhs_read(priv, fifo->sel))) {
+			usbhs_pipe_select_fifo(pipe, fifo);
+			return 0;
+		}
+		udelay(10);
+	}
+
+	dev_err(dev, "fifo select error\n");
+
+	return -EIO;
+}
+
+/*
+ *		PIO push handler
+ */
+static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+	void __iomem *addr = priv->base + fifo->port;
+	u8 *buf;
+	int maxp = usbhs_pipe_get_maxpacket(pipe);
+	int total_len;
+	int i, ret, len;
+	int is_short;
+
+	ret = usbhsf_fifo_select(pipe, fifo, 1);
+	if (ret < 0)
+		return 0;
+
+	ret = usbhs_pipe_is_accessible(pipe);
+	if (ret < 0) {
+		/* inaccessible pipe is not an error */
+		ret = 0;
+		goto usbhs_fifo_write_busy;
+	}
+
+	ret = usbhsf_fifo_barrier(priv, fifo);
+	if (ret < 0)
+		goto usbhs_fifo_write_busy;
+
+	buf		= pkt->buf    + pkt->actual;
+	len		= pkt->length - pkt->actual;
+	len		= min(len, maxp);
+	total_len	= len;
+	is_short	= total_len < maxp;
+
+	/*
+	 * FIXME
+	 *
+	 * 32-bit access only
+	 */
+	if (len >= 4 && !((unsigned long)buf & 0x03)) {
+		iowrite32_rep(addr, buf, len / 4);
+		len %= 4;
+		buf += total_len - len;
+	}
+
+	/* the rest operation */
+	for (i = 0; i < len; i++)
+		iowrite8(buf[i], addr + (0x03 - (i & 0x03)));
+
+	/*
+	 * variable update
+	 */
+	pkt->actual += total_len;
+
+	if (pkt->actual < pkt->length)
+		*is_done = 0;		/* there are remainder data */
+	else if (is_short)
+		*is_done = 1;		/* short packet */
+	else
+		*is_done = !pkt->zero;	/* send zero packet ? */
+
+	/*
+	 * pipe/irq handling
+	 */
+	if (is_short)
+		usbhsf_send_terminator(pipe, fifo);
+
+	usbhsf_tx_irq_ctrl(pipe, !*is_done);
+	usbhs_pipe_enable(pipe);
+
+	dev_dbg(dev, "  send %d (%d/ %d/ %d/ %d)\n",
+		usbhs_pipe_number(pipe),
+		pkt->length, pkt->actual, *is_done, pkt->zero);
+
+	/*
+	 * Transmission end
+	 */
+	if (*is_done) {
+		if (usbhs_pipe_is_dcp(pipe))
+			usbhs_dcp_control_transfer_done(pipe);
+	}
+
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	return 0;
+
+usbhs_fifo_write_busy:
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	/*
+	 * pipe is busy.
+	 * retry in interrupt
+	 */
+	usbhsf_tx_irq_ctrl(pipe, 1);
+
+	return ret;
+}
+
+struct usbhs_pkt_handle usbhs_fifo_pio_push_handler = {
+	.prepare = usbhsf_pio_try_push,
+	.try_run = usbhsf_pio_try_push,
+};
+
+/*
+ *		PIO pop handler
+ */
+static int usbhsf_prepare_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	/*
+	 * pipe enable to prepare packet receive
+	 */
+
+	usbhs_pipe_enable(pipe);
+	usbhsf_rx_irq_ctrl(pipe, 1);
+
+	return 0;
+}
+
+static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */
+	void __iomem *addr = priv->base + fifo->port;
+	u8 *buf;
+	u32 data = 0;
+	int maxp = usbhs_pipe_get_maxpacket(pipe);
+	int rcv_len, len;
+	int i, ret;
+	int total_len = 0;
+
+	ret = usbhsf_fifo_select(pipe, fifo, 0);
+	if (ret < 0)
+		return 0;
+
+	ret = usbhsf_fifo_barrier(priv, fifo);
+	if (ret < 0)
+		goto usbhs_fifo_read_busy;
+
+	rcv_len = usbhsf_fifo_rcv_len(priv, fifo);
+
+	buf		= pkt->buf    + pkt->actual;
+	len		= pkt->length - pkt->actual;
+	len		= min(len, rcv_len);
+	total_len	= len;
+
+	/*
+	 * Buffer clear if Zero-Length packet
+	 *
+	 * see
+	 * "Operation" - "FIFO Buffer Memory" - "FIFO Port Function"
+	 */
+	if (0 == rcv_len) {
+		usbhsf_fifo_clear(pipe, fifo);
+		goto usbhs_fifo_read_end;
+	}
+
+	/*
+	 * FIXME
+	 *
+	 * 32-bit access only
+	 */
+	if (len >= 4 && !((unsigned long)buf & 0x03)) {
+		ioread32_rep(addr, buf, len / 4);
+		len %= 4;
+		buf += total_len - len;
+	}
+
+	/* the rest operation */
+	for (i = 0; i < len; i++) {
+		if (!(i & 0x03))
+			data = ioread32(addr);
+
+		buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
+	}
+
+	pkt->actual += total_len;
+
+usbhs_fifo_read_end:
+	if ((pkt->actual == pkt->length) ||	/* receive all data */
+	    (total_len < maxp)) {		/* short packet */
+		*is_done = 1;
+		usbhsf_rx_irq_ctrl(pipe, 0);
+		usbhs_pipe_disable(pipe);
+	}
+
+	dev_dbg(dev, "  recv %d (%d/ %d/ %d/ %d)\n",
+		usbhs_pipe_number(pipe),
+		pkt->length, pkt->actual, *is_done, pkt->zero);
+
+usbhs_fifo_read_busy:
+	usbhsf_fifo_unselect(pipe, fifo);
+
+	return ret;
+}
+
+struct usbhs_pkt_handle usbhs_fifo_pio_pop_handler = {
+	.prepare = usbhsf_prepare_pop,
+	.try_run = usbhsf_pio_try_pop,
+};
+
+/*
+ *		DCP ctrol statge handler
+ */
+static int usbhsf_ctrl_stage_end(struct usbhs_pkt *pkt, int *is_done)
+{
+	usbhs_dcp_control_transfer_done(pkt->pipe);
+
+	*is_done = 1;
+
+	return 0;
+}
+
+struct usbhs_pkt_handle usbhs_ctrl_stage_end_handler = {
+	.prepare = usbhsf_ctrl_stage_end,
+	.try_run = usbhsf_ctrl_stage_end,
+};
+
+/*
+ *		DMA fifo functions
+ */
+static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo,
+					    struct usbhs_pkt *pkt)
+{
+	if (&usbhs_fifo_dma_push_handler == pkt->handler)
+		return fifo->tx_chan;
+
+	if (&usbhs_fifo_dma_pop_handler == pkt->handler)
+		return fifo->rx_chan;
+
+	return NULL;
+}
+
+static struct usbhs_fifo *usbhsf_get_dma_fifo(struct usbhs_priv *priv,
+					      struct usbhs_pkt *pkt)
+{
+	struct usbhs_fifo *fifo;
+
+	/* DMA :: D0FIFO */
+	fifo = usbhsf_get_d0fifo(priv);
+	if (usbhsf_dma_chan_get(fifo, pkt) &&
+	    !usbhsf_fifo_is_busy(fifo))
+		return fifo;
+
+	/* DMA :: D1FIFO */
+	fifo = usbhsf_get_d1fifo(priv);
+	if (usbhsf_dma_chan_get(fifo, pkt) &&
+	    !usbhsf_fifo_is_busy(fifo))
+		return fifo;
+
+	return NULL;
+}
+
+#define usbhsf_dma_start(p, f)	__usbhsf_dma_ctrl(p, f, DREQE)
+#define usbhsf_dma_stop(p, f)	__usbhsf_dma_ctrl(p, f, 0)
+static void __usbhsf_dma_ctrl(struct usbhs_pipe *pipe,
+			      struct usbhs_fifo *fifo,
+			      u16 dreqe)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	usbhs_bset(priv, fifo->sel, DREQE, dreqe);
+}
+
+#define usbhsf_dma_map(p)	__usbhsf_dma_map_ctrl(p, 1)
+#define usbhsf_dma_unmap(p)	__usbhsf_dma_map_ctrl(p, 0)
+static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
+
+	return info->dma_map_ctrl(pkt, map);
+}
+
+static void usbhsf_dma_complete(void *arg);
+static void usbhsf_dma_prepare_tasklet(unsigned long data)
+{
+	struct usbhs_pkt *pkt = (struct usbhs_pkt *)data;
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe);
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct scatterlist sg;
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	enum dma_data_direction dir;
+	dma_cookie_t cookie;
+
+	dir = usbhs_pipe_is_dir_in(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+	sg_init_table(&sg, 1);
+	sg_set_page(&sg, virt_to_page(pkt->dma),
+		    pkt->length, offset_in_page(pkt->dma));
+	sg_dma_address(&sg) = pkt->dma + pkt->actual;
+	sg_dma_len(&sg) = pkt->trans;
+
+	desc = chan->device->device_prep_slave_sg(chan, &sg, 1, dir,
+						  DMA_PREP_INTERRUPT |
+						  DMA_CTRL_ACK);
+	if (!desc)
+		return;
+
+	desc->callback		= usbhsf_dma_complete;
+	desc->callback_param	= pipe;
+
+	cookie = desc->tx_submit(desc);
+	if (cookie < 0) {
+		dev_err(dev, "Failed to submit dma descriptor\n");
+		return;
+	}
+
+	dev_dbg(dev, "  %s %d (%d/ %d)\n",
+		fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero);
+
+	usbhsf_dma_start(pipe, fifo);
+	dma_async_issue_pending(chan);
+}
+
+/*
+ *		DMA push handler
+ */
+static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo;
+	int len = pkt->length - pkt->actual;
+	int ret;
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	/* use PIO if packet is less than pio_dma_border or pipe is DCP */
+	if ((len < usbhs_get_dparam(priv, pio_dma_border)) ||
+	    usbhs_pipe_is_dcp(pipe))
+		goto usbhsf_pio_prepare_push;
+
+	if (len % 4) /* 32bit alignment */
+		goto usbhsf_pio_prepare_push;
+
+	if (((u32)pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
+		goto usbhsf_pio_prepare_push;
+
+	/* get enable DMA fifo */
+	fifo = usbhsf_get_dma_fifo(priv, pkt);
+	if (!fifo)
+		goto usbhsf_pio_prepare_push;
+
+	if (usbhsf_dma_map(pkt) < 0)
+		goto usbhsf_pio_prepare_push;
+
+	ret = usbhsf_fifo_select(pipe, fifo, 0);
+	if (ret < 0)
+		goto usbhsf_pio_prepare_push_unmap;
+
+	pkt->trans = len;
+
+	tasklet_init(&fifo->tasklet,
+		     usbhsf_dma_prepare_tasklet,
+		     (unsigned long)pkt);
+
+	tasklet_schedule(&fifo->tasklet);
+
+	return 0;
+
+usbhsf_pio_prepare_push_unmap:
+	usbhsf_dma_unmap(pkt);
+usbhsf_pio_prepare_push:
+	/*
+	 * change handler to PIO
+	 */
+	pkt->handler = &usbhs_fifo_pio_push_handler;
+
+	return pkt->handler->prepare(pkt, is_done);
+}
+
+static int usbhsf_dma_push_done(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+
+	pkt->actual = pkt->trans;
+
+	*is_done = !pkt->zero;	/* send zero packet ? */
+
+	usbhsf_dma_stop(pipe, pipe->fifo);
+	usbhsf_dma_unmap(pkt);
+	usbhsf_fifo_unselect(pipe, pipe->fifo);
+
+	return 0;
+}
+
+struct usbhs_pkt_handle usbhs_fifo_dma_push_handler = {
+	.prepare	= usbhsf_dma_prepare_push,
+	.dma_done	= usbhsf_dma_push_done,
+};
+
+/*
+ *		DMA pop handler
+ */
+static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo;
+	int len, ret;
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	if (usbhs_pipe_is_dcp(pipe))
+		goto usbhsf_pio_prepare_pop;
+
+	/* get enable DMA fifo */
+	fifo = usbhsf_get_dma_fifo(priv, pkt);
+	if (!fifo)
+		goto usbhsf_pio_prepare_pop;
+
+	if (((u32)pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
+		goto usbhsf_pio_prepare_pop;
+
+	ret = usbhsf_fifo_select(pipe, fifo, 0);
+	if (ret < 0)
+		goto usbhsf_pio_prepare_pop;
+
+	/* use PIO if packet is less than pio_dma_border */
+	len = usbhsf_fifo_rcv_len(priv, fifo);
+	len = min(pkt->length - pkt->actual, len);
+	if (len % 4) /* 32bit alignment */
+		goto usbhsf_pio_prepare_pop_unselect;
+
+	if (len < usbhs_get_dparam(priv, pio_dma_border))
+		goto usbhsf_pio_prepare_pop_unselect;
+
+	ret = usbhsf_fifo_barrier(priv, fifo);
+	if (ret < 0)
+		goto usbhsf_pio_prepare_pop_unselect;
+
+	if (usbhsf_dma_map(pkt) < 0)
+		goto usbhsf_pio_prepare_pop_unselect;
+
+	/* DMA */
+
+	/*
+	 * usbhs_fifo_dma_pop_handler :: prepare
+	 * enabled irq to come here.
+	 * but it is no longer needed for DMA. disable it.
+	 */
+	usbhsf_rx_irq_ctrl(pipe, 0);
+
+	pkt->trans = len;
+
+	tasklet_init(&fifo->tasklet,
+		     usbhsf_dma_prepare_tasklet,
+		     (unsigned long)pkt);
+
+	tasklet_schedule(&fifo->tasklet);
+
+	return 0;
+
+usbhsf_pio_prepare_pop_unselect:
+	usbhsf_fifo_unselect(pipe, fifo);
+usbhsf_pio_prepare_pop:
+
+	/*
+	 * change handler to PIO
+	 */
+	pkt->handler = &usbhs_fifo_pio_pop_handler;
+
+	return pkt->handler->try_run(pkt, is_done);
+}
+
+static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	int maxp = usbhs_pipe_get_maxpacket(pipe);
+
+	usbhsf_dma_stop(pipe, pipe->fifo);
+	usbhsf_dma_unmap(pkt);
+	usbhsf_fifo_unselect(pipe, pipe->fifo);
+
+	pkt->actual += pkt->trans;
+
+	if ((pkt->actual == pkt->length) ||	/* receive all data */
+	    (pkt->trans < maxp)) {		/* short packet */
+		*is_done = 1;
+	} else {
+		/* re-enable */
+		usbhsf_prepare_pop(pkt, is_done);
+	}
+
+	return 0;
+}
+
+struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler = {
+	.prepare	= usbhsf_prepare_pop,
+	.try_run	= usbhsf_dma_try_pop,
+	.dma_done	= usbhsf_dma_pop_done
+};
+
+/*
+ *		DMA setting
+ */
+static bool usbhsf_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct sh_dmae_slave *slave = param;
+
+	/*
+	 * FIXME
+	 *
+	 * usbhs doesn't recognize id = 0 as valid DMA
+	 */
+	if (0 == slave->slave_id)
+		return false;
+
+	chan->private = slave;
+
+	return true;
+}
+
+static void usbhsf_dma_quit(struct usbhs_priv *priv, struct usbhs_fifo *fifo)
+{
+	if (fifo->tx_chan)
+		dma_release_channel(fifo->tx_chan);
+	if (fifo->rx_chan)
+		dma_release_channel(fifo->rx_chan);
+
+	fifo->tx_chan = NULL;
+	fifo->rx_chan = NULL;
+}
+
+static void usbhsf_dma_init(struct usbhs_priv *priv,
+			    struct usbhs_fifo *fifo)
+{
+	struct device *dev = usbhs_priv_to_dev(priv);
+	dma_cap_mask_t mask;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	fifo->tx_chan = dma_request_channel(mask, usbhsf_dma_filter,
+					    &fifo->tx_slave);
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	fifo->rx_chan = dma_request_channel(mask, usbhsf_dma_filter,
+					    &fifo->rx_slave);
+
+	if (fifo->tx_chan || fifo->rx_chan)
+		dev_dbg(dev, "enable DMAEngine (%s%s%s)\n",
+			 fifo->name,
+			 fifo->tx_chan ? "[TX]" : "    ",
+			 fifo->rx_chan ? "[RX]" : "    ");
+}
+
+/*
+ *		irq functions
+ */
+static int usbhsf_irq_empty(struct usbhs_priv *priv,
+			    struct usbhs_irq_state *irq_state)
+{
+	struct usbhs_pipe *pipe;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int i, ret;
+
+	if (!irq_state->bempsts) {
+		dev_err(dev, "debug %s !!\n", __func__);
+		return -EIO;
+	}
+
+	dev_dbg(dev, "irq empty [0x%04x]\n", irq_state->bempsts);
+
+	/*
+	 * search interrupted "pipe"
+	 * not "uep".
+	 */
+	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+		if (!(irq_state->bempsts & (1 << i)))
+			continue;
+
+		ret = usbhs_pkt_run(pipe);
+		if (ret < 0)
+			dev_err(dev, "irq_empty run_error %d : %d\n", i, ret);
+	}
+
+	return 0;
+}
+
+static int usbhsf_irq_ready(struct usbhs_priv *priv,
+			    struct usbhs_irq_state *irq_state)
+{
+	struct usbhs_pipe *pipe;
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int i, ret;
+
+	if (!irq_state->brdysts) {
+		dev_err(dev, "debug %s !!\n", __func__);
+		return -EIO;
+	}
+
+	dev_dbg(dev, "irq ready [0x%04x]\n", irq_state->brdysts);
+
+	/*
+	 * search interrupted "pipe"
+	 * not "uep".
+	 */
+	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
+		if (!(irq_state->brdysts & (1 << i)))
+			continue;
+
+		ret = usbhs_pkt_run(pipe);
+		if (ret < 0)
+			dev_err(dev, "irq_ready run_error %d : %d\n", i, ret);
+	}
+
+	return 0;
+}
+
+static void usbhsf_dma_complete(void *arg)
+{
+	struct usbhs_pipe *pipe = arg;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct device *dev = usbhs_priv_to_dev(priv);
+	int ret;
+
+	ret = usbhs_pkt_dmadone(pipe);
+	if (ret < 0)
+		dev_err(dev, "dma_complete run_error %d : %d\n",
+			usbhs_pipe_number(pipe), ret);
+}
+
+/*
+ *		fifo init
+ */
+void usbhs_fifo_init(struct usbhs_priv *priv)
+{
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+	struct usbhs_fifo *cfifo = usbhsf_get_cfifo(priv);
+	struct usbhs_fifo *d0fifo = usbhsf_get_d0fifo(priv);
+	struct usbhs_fifo *d1fifo = usbhsf_get_d1fifo(priv);
+
+	mod->irq_empty		= usbhsf_irq_empty;
+	mod->irq_ready		= usbhsf_irq_ready;
+	mod->irq_bempsts	= 0;
+	mod->irq_brdysts	= 0;
+
+	cfifo->pipe	= NULL;
+	cfifo->tx_chan	= NULL;
+	cfifo->rx_chan	= NULL;
+
+	d0fifo->pipe	= NULL;
+	d0fifo->tx_chan	= NULL;
+	d0fifo->rx_chan	= NULL;
+
+	d1fifo->pipe	= NULL;
+	d1fifo->tx_chan	= NULL;
+	d1fifo->rx_chan	= NULL;
+
+	usbhsf_dma_init(priv, usbhsf_get_d0fifo(priv));
+	usbhsf_dma_init(priv, usbhsf_get_d1fifo(priv));
+}
+
+void usbhs_fifo_quit(struct usbhs_priv *priv)
+{
+	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
+
+	mod->irq_empty		= NULL;
+	mod->irq_ready		= NULL;
+	mod->irq_bempsts	= 0;
+	mod->irq_brdysts	= 0;
+
+	usbhsf_dma_quit(priv, usbhsf_get_d0fifo(priv));
+	usbhsf_dma_quit(priv, usbhsf_get_d1fifo(priv));
+}
+
+int usbhs_fifo_probe(struct usbhs_priv *priv)
+{
+	struct usbhs_fifo *fifo;
+
+	/* CFIFO */
+	fifo = usbhsf_get_cfifo(priv);
+	fifo->name	= "CFIFO";
+	fifo->port	= CFIFO;
+	fifo->sel	= CFIFOSEL;
+	fifo->ctr	= CFIFOCTR;
+
+	/* D0FIFO */
+	fifo = usbhsf_get_d0fifo(priv);
+	fifo->name	= "D0FIFO";
+	fifo->port	= D0FIFO;
+	fifo->sel	= D0FIFOSEL;
+	fifo->ctr	= D0FIFOCTR;
+	fifo->tx_slave.slave_id	= usbhs_get_dparam(priv, d0_tx_id);
+	fifo->rx_slave.slave_id	= usbhs_get_dparam(priv, d0_rx_id);
+
+	/* D1FIFO */
+	fifo = usbhsf_get_d1fifo(priv);
+	fifo->name	= "D1FIFO";
+	fifo->port	= D1FIFO;
+	fifo->sel	= D1FIFOSEL;
+	fifo->ctr	= D1FIFOCTR;
+	fifo->tx_slave.slave_id	= usbhs_get_dparam(priv, d1_tx_id);
+	fifo->rx_slave.slave_id	= usbhs_get_dparam(priv, d1_rx_id);
+
+	return 0;
+}
+
+void usbhs_fifo_remove(struct usbhs_priv *priv)
+{
+}
diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h
new file mode 100644
index 00000000000..ed6d8e56c13
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/fifo.h
@@ -0,0 +1,104 @@
+/*
+ * Renesas USB driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#ifndef RENESAS_USB_FIFO_H
+#define RENESAS_USB_FIFO_H
+
+#include <linux/interrupt.h>
+#include <linux/sh_dma.h>
+#include <asm/dma.h>
+#include "pipe.h"
+
+#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+struct usbhs_fifo {
+	char *name;
+	u32 port;	/* xFIFO */
+	u32 sel;	/* xFIFOSEL */
+	u32 ctr;	/* xFIFOCTR */
+
+	struct usbhs_pipe	*pipe;
+	struct tasklet_struct	tasklet;
+
+	struct dma_chan		*tx_chan;
+	struct dma_chan		*rx_chan;
+
+	struct sh_dmae_slave	tx_slave;
+	struct sh_dmae_slave	rx_slave;
+};
+
+struct usbhs_fifo_info {
+	struct usbhs_fifo cfifo;
+	struct usbhs_fifo d0fifo;
+	struct usbhs_fifo d1fifo;
+};
+
+struct usbhs_pkt_handle;
+struct usbhs_pkt {
+	struct list_head node;
+	struct usbhs_pipe *pipe;
+	struct usbhs_pkt_handle *handler;
+	dma_addr_t dma;
+	void *buf;
+	int length;
+	int trans;
+	int actual;
+	int zero;
+};
+
+struct usbhs_pkt_handle {
+	int (*prepare)(struct usbhs_pkt *pkt, int *is_done);
+	int (*try_run)(struct usbhs_pkt *pkt, int *is_done);
+	int (*dma_done)(struct usbhs_pkt *pkt, int *is_done);
+};
+
+/*
+ * fifo
+ */
+int usbhs_fifo_probe(struct usbhs_priv *priv);
+void usbhs_fifo_remove(struct usbhs_priv *priv);
+void usbhs_fifo_init(struct usbhs_priv *priv);
+void usbhs_fifo_quit(struct usbhs_priv *priv);
+
+/*
+ * packet info
+ */
+enum {
+	USBHSF_PKT_PREPARE,
+	USBHSF_PKT_TRY_RUN,
+	USBHSF_PKT_DMA_DONE,
+};
+
+extern struct usbhs_pkt_handle usbhs_fifo_pio_push_handler;
+extern struct usbhs_pkt_handle usbhs_fifo_pio_pop_handler;
+extern struct usbhs_pkt_handle usbhs_ctrl_stage_end_handler;
+
+extern struct usbhs_pkt_handle usbhs_fifo_dma_push_handler;
+extern struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler;
+
+
+void usbhs_pkt_init(struct usbhs_pkt *pkt);
+void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt,
+		    struct usbhs_pkt_handle *handler,
+		    void *buf, int len, int zero);
+struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt);
+int __usbhs_pkt_handler(struct usbhs_pipe *pipe, int type);
+
+#define usbhs_pkt_start(p)	__usbhs_pkt_handler(p, USBHSF_PKT_PREPARE)
+#define usbhs_pkt_run(p)	__usbhs_pkt_handler(p, USBHSF_PKT_TRY_RUN)
+#define usbhs_pkt_dmadone(p)	__usbhs_pkt_handler(p, USBHSF_PKT_DMA_DONE)
+
+#endif /* RENESAS_USB_FIFO_H */
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 547486ccd05..ba79dbf5adb 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -26,26 +26,25 @@
  */
 struct usbhsg_request {
 	struct usb_request	req;
-	struct list_head	node;
+	struct usbhs_pkt	pkt;
 };
 
 #define EP_NAME_SIZE 8
 struct usbhsg_gpriv;
-struct usbhsg_pipe_handle;
 struct usbhsg_uep {
 	struct usb_ep		 ep;
 	struct usbhs_pipe	*pipe;
-	struct list_head	 list;
 
 	char ep_name[EP_NAME_SIZE];
 
 	struct usbhsg_gpriv *gpriv;
-	struct usbhsg_pipe_handle *handler;
+	struct usbhs_pkt_handle *handler;
 };
 
 struct usbhsg_gpriv {
 	struct usb_gadget	 gadget;
 	struct usbhs_mod	 mod;
+	struct list_head	 link;
 
 	struct usbhsg_uep	*uep;
 	int			 uep_size;
@@ -58,12 +57,6 @@ struct usbhsg_gpriv {
 #define USBHSG_STATUS_WEDGE		(1 << 2)
 };
 
-struct usbhsg_pipe_handle {
-	int (*prepare)(struct usbhsg_uep *uep, struct usbhsg_request *ureq);
-	int (*try_run)(struct usbhsg_uep *uep, struct usbhsg_request *ureq);
-	void (*irq_mask)(struct usbhsg_uep *uep, int enable);
-};
-
 struct usbhsg_recip_handle {
 	char *name;
 	int (*device)(struct usbhs_priv *priv, struct usbhsg_uep *uep,
@@ -100,7 +93,6 @@ struct usbhsg_recip_handle {
 	container_of(r, struct usbhsg_request, req)
 
 #define usbhsg_ep_to_uep(e)		container_of(e, struct usbhsg_uep, ep)
-#define usbhsg_gpriv_to_lock(gp)	usbhs_priv_to_lock((gp)->mod.priv)
 #define usbhsg_gpriv_to_dev(gp)		usbhs_priv_to_dev((gp)->mod.priv)
 #define usbhsg_gpriv_to_priv(gp)	((gp)->mod.priv)
 #define usbhsg_gpriv_to_dcp(gp)		((gp)->uep)
@@ -110,6 +102,10 @@ struct usbhsg_recip_handle {
 #define usbhsg_pipe_to_uep(p)		((p)->mod_private)
 #define usbhsg_is_dcp(u)		((u) == usbhsg_gpriv_to_dcp((u)->gpriv))
 
+#define usbhsg_ureq_to_pkt(u)		(&(u)->pkt)
+#define usbhsg_pkt_to_ureq(i)	\
+	container_of(i, struct usbhsg_request, pkt)
+
 #define usbhsg_is_not_connected(gp) ((gp)->gadget.speed == USB_SPEED_UNKNOWN)
 
 /* status */
@@ -118,37 +114,18 @@ struct usbhsg_recip_handle {
 #define usbhsg_status_clr(gp, b) (gp->status &= ~b)
 #define usbhsg_status_has(gp, b) (gp->status &   b)
 
-/*
- *		usbhsg_trylock
- *
- * This driver don't use spin_try_lock
- * to avoid warning of CONFIG_DEBUG_SPINLOCK
- */
-static spinlock_t *usbhsg_trylock(struct usbhsg_gpriv *gpriv,
-				  unsigned long *flags)
-{
-	spinlock_t *lock = usbhsg_gpriv_to_lock(gpriv);
-
-	/* check spin lock status
-	 * to avoid deadlock/nest */
-	if (spin_is_locked(lock))
-		return NULL;
+/* controller */
+LIST_HEAD(the_controller_link);
 
-	spin_lock_irqsave(lock, *flags);
-
-	return lock;
-}
-
-static void usbhsg_unlock(spinlock_t *lock, unsigned long *flags)
-{
-	if (!lock)
-		return;
-
-	spin_unlock_irqrestore(lock, *flags);
-}
+#define usbhsg_for_each_controller(gpriv)\
+	list_for_each_entry(gpriv, &the_controller_link, link)
+#define usbhsg_controller_register(gpriv)\
+	list_add_tail(&(gpriv)->link, &the_controller_link)
+#define usbhsg_controller_unregister(gpriv)\
+	list_del_init(&(gpriv)->link)
 
 /*
- *		list push/pop
+ *		queue push/pop
  */
 static void usbhsg_queue_push(struct usbhsg_uep *uep,
 			      struct usbhsg_request *ureq)
@@ -156,79 +133,17 @@ static void usbhsg_queue_push(struct usbhsg_uep *uep,
 	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
 	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
 	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	struct usbhs_pkt *pkt = usbhsg_ureq_to_pkt(ureq);
+	struct usb_request *req = &ureq->req;
 
-	/*
-	 *********  assume under spin lock  *********
-	 */
-	list_del_init(&ureq->node);
-	list_add_tail(&ureq->node, &uep->list);
-	ureq->req.actual = 0;
-	ureq->req.status = -EINPROGRESS;
+	req->actual = 0;
+	req->status = -EINPROGRESS;
+	usbhs_pkt_push(pipe, pkt, uep->handler,
+		       req->buf, req->length, req->zero);
 
 	dev_dbg(dev, "pipe %d : queue push (%d)\n",
 		usbhs_pipe_number(pipe),
-		ureq->req.length);
-}
-
-static struct usbhsg_request *usbhsg_queue_get(struct usbhsg_uep *uep)
-{
-	/*
-	 *********  assume under spin lock  *********
-	 */
-	if (list_empty(&uep->list))
-		return NULL;
-
-	return list_entry(uep->list.next, struct usbhsg_request, node);
-}
-
-#define usbhsg_queue_prepare(uep) __usbhsg_queue_handler(uep, 1);
-#define usbhsg_queue_handle(uep)  __usbhsg_queue_handler(uep, 0);
-static int __usbhsg_queue_handler(struct usbhsg_uep *uep, int prepare)
-{
-	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
-	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
-	struct usbhsg_request *ureq;
-	spinlock_t *lock;
-	unsigned long flags;
-	int ret = 0;
-
-	if (!uep->handler) {
-		dev_err(dev, "no handler function\n");
-		return -EIO;
-	}
-
-	/*
-	 * CAUTION [*queue handler*]
-	 *
-	 * This function will be called for start/restart queue operation.
-	 * OTOH the most much worry for USB driver is spinlock nest.
-	 * Specially it are
-	 *   - usb_ep_ops  :: queue
-	 *   - usb_request :: complete
-	 *
-	 * But the caller of this function need not care about spinlock.
-	 * This function is using usbhsg_trylock for it.
-	 * if "is_locked" is 1, this mean this function lock it.
-	 * but if it is 0, this mean it is already under spin lock.
-	 * see also
-	 *   CAUTION [*endpoint queue*]
-	 *   CAUTION [*request complete*]
-	 */
-
-	/******************  spin try lock *******************/
-	lock = usbhsg_trylock(gpriv, &flags);
-
-	ureq = usbhsg_queue_get(uep);
-	if (ureq) {
-		if (prepare)
-			ret = uep->handler->prepare(uep, ureq);
-		else
-			ret = uep->handler->try_run(uep, ureq);
-	}
-	usbhsg_unlock(lock, &flags);
-	/********************  spin unlock ******************/
-
-	return ret;
+		req->length);
 }
 
 static void usbhsg_queue_pop(struct usbhsg_uep *uep,
@@ -239,289 +154,91 @@ static void usbhsg_queue_pop(struct usbhsg_uep *uep,
 	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
 	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
 
-	/*
-	 *********  assume under spin lock  *********
-	 */
-
-	/*
-	 * CAUTION [*request complete*]
-	 *
-	 * There is a possibility not to be called in correct order
-	 * if "complete" is called without spinlock.
-	 *
-	 * So, this function assume it is under spinlock,
-	 * and call usb_request :: complete.
-	 *
-	 * But this "complete" will push next usb_request.
-	 * It mean "usb_ep_ops :: queue" which is using spinlock is called
-	 * under spinlock.
-	 *
-	 * To avoid dead-lock, this driver is using usbhsg_trylock.
-	 *   CAUTION [*endpoint queue*]
-	 *   CAUTION [*queue handler*]
-	 */
-
 	dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe));
 
-	list_del_init(&ureq->node);
-
 	ureq->req.status = status;
 	ureq->req.complete(&uep->ep, &ureq->req);
-
-	/* more request ? */
-	if (0 == status)
-		usbhsg_queue_prepare(uep);
 }
 
-/*
- *		irq enable/disable function
- */
-#define usbhsg_irq_callback_ctrl(uep, status, enable)			\
-	({								\
-		struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);	\
-		struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);	\
-		struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);	\
-		struct usbhs_mod *mod = usbhs_mod_get_current(priv);	\
-		if (!mod)						\
-			return;						\
-		if (enable)						\
-			mod->irq_##status |= (1 << usbhs_pipe_number(pipe)); \
-		else							\
-			mod->irq_##status &= ~(1 << usbhs_pipe_number(pipe)); \
-		usbhs_irq_callback_update(priv, mod);			\
-	})
-
-static void usbhsg_irq_empty_ctrl(struct usbhsg_uep *uep, int enable)
+static void usbhsg_queue_done(struct usbhs_pkt *pkt)
 {
-	usbhsg_irq_callback_ctrl(uep, bempsts, enable);
-}
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhsg_uep *uep = usbhsg_pipe_to_uep(pipe);
+	struct usbhsg_request *ureq = usbhsg_pkt_to_ureq(pkt);
 
-static void usbhsg_irq_ready_ctrl(struct usbhsg_uep *uep, int enable)
-{
-	usbhsg_irq_callback_ctrl(uep, brdysts, enable);
-}
-
-/*
- *		handler function
- */
-static int usbhsg_try_run_ctrl_stage_end(struct usbhsg_uep *uep,
-					 struct usbhsg_request *ureq)
-{
-	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
-
-	/*
-	 *********  assume under spin lock  *********
-	 */
+	ureq->req.actual = pkt->actual;
 
-	usbhs_dcp_control_transfer_done(pipe);
 	usbhsg_queue_pop(uep, ureq, 0);
-
-	return 0;
 }
 
-static int usbhsg_try_run_send_packet(struct usbhsg_uep *uep,
-				      struct usbhsg_request *ureq)
+/*
+ *		dma map/unmap
+ */
+static int usbhsg_dma_map(struct device *dev,
+			  struct usbhs_pkt *pkt,
+			  enum dma_data_direction dir)
 {
-	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	struct usbhsg_request *ureq = usbhsg_pkt_to_ureq(pkt);
 	struct usb_request *req = &ureq->req;
-	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
-	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
-	void *buf;
-	int remainder, send;
-	int is_done = 0;
-	int enable;
-	int maxp;
 
-	/*
-	 *********  assume under spin lock  *********
-	 */
-
-	maxp		= usbhs_pipe_get_maxpacket(pipe);
-	buf		= req->buf    + req->actual;
-	remainder	= req->length - req->actual;
-
-	send = usbhs_fifo_write(pipe, buf, remainder);
-
-	/*
-	 * send < 0 : pipe busy
-	 * send = 0 : send zero packet
-	 * send > 0 : send data
-	 *
-	 * send <= max_packet
-	 */
-	if (send > 0)
-		req->actual += send;
-
-	/* send all packet ? */
-	if (send < remainder)
-		is_done = 0;		/* there are remainder data */
-	else if (send < maxp)
-		is_done = 1;		/* short packet */
-	else
-		is_done = !req->zero;	/* send zero packet ? */
-
-	dev_dbg(dev, "  send %d (%d/ %d/ %d/ %d)\n",
-		usbhs_pipe_number(pipe),
-		remainder, send, is_done, req->zero);
-
-	/*
-	 * enable interrupt and send again in irq handler
-	 * if it still have remainder data which should be sent.
-	 */
-	enable = !is_done;
-	uep->handler->irq_mask(uep, enable);
-
-	/*
-	 * usbhs_fifo_enable execute
-	 *  - after callback_update,
-	 *  - before queue_pop / stage_end
-	 */
-	usbhs_fifo_enable(pipe);
-
-	/*
-	 * all data were sent ?
-	 */
-	if (is_done) {
-		/* it care below call in
-		   "function mode" */
-		if (usbhsg_is_dcp(uep))
-			usbhs_dcp_control_transfer_done(pipe);
-
-		usbhsg_queue_pop(uep, ureq, 0);
+	if (pkt->dma != DMA_ADDR_INVALID) {
+		dev_err(dev, "dma is already mapped\n");
+		return -EIO;
 	}
 
-	return 0;
-}
-
-static int usbhsg_prepare_send_packet(struct usbhsg_uep *uep,
-				      struct usbhsg_request *ureq)
-{
-	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
-
-	/*
-	 *********  assume under spin lock  *********
-	 */
+	if (req->dma == DMA_ADDR_INVALID) {
+		pkt->dma = dma_map_single(dev, pkt->buf, pkt->length, dir);
+	} else {
+		dma_sync_single_for_device(dev, req->dma, req->length, dir);
+		pkt->dma = req->dma;
+	}
 
-	usbhs_fifo_prepare_write(pipe);
-	usbhsg_try_run_send_packet(uep, ureq);
+	if (dma_mapping_error(dev, pkt->dma)) {
+		dev_err(dev, "dma mapping error %x\n", pkt->dma);
+		return -EIO;
+	}
 
 	return 0;
 }
 
-static int usbhsg_try_run_receive_packet(struct usbhsg_uep *uep,
-					 struct usbhsg_request *ureq)
+static int usbhsg_dma_unmap(struct device *dev,
+			    struct usbhs_pkt *pkt,
+			    enum dma_data_direction dir)
 {
-	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
+	struct usbhsg_request *ureq = usbhsg_pkt_to_ureq(pkt);
 	struct usb_request *req = &ureq->req;
-	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
-	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
-	void *buf;
-	int maxp;
-	int remainder, recv;
-	int is_done = 0;
-
-	/*
-	 *********  assume under spin lock  *********
-	 */
-
-	maxp		= usbhs_pipe_get_maxpacket(pipe);
-	buf		= req->buf    + req->actual;
-	remainder	= req->length - req->actual;
-
-	recv = usbhs_fifo_read(pipe, buf, remainder);
-	/*
-	 * recv < 0  : pipe busy
-	 * recv >= 0 : receive data
-	 *
-	 * recv <= max_packet
-	 */
-	if (recv < 0)
-		return -EBUSY;
-
-	/* update parameters */
-	req->actual += recv;
-
-	if ((recv == remainder) ||	/* receive all data */
-	    (recv < maxp))		/* short packet */
-		is_done = 1;
 
-	dev_dbg(dev, "  recv %d (%d/ %d/ %d/ %d)\n",
-		usbhs_pipe_number(pipe),
-		remainder, recv, is_done, req->zero);
+	if (pkt->dma == DMA_ADDR_INVALID) {
+		dev_err(dev, "dma is not mapped\n");
+		return -EIO;
+	}
 
-	/* read all data ? */
-	if (is_done) {
-		int disable = 0;
+	if (req->dma == DMA_ADDR_INVALID)
+		dma_unmap_single(dev, pkt->dma, pkt->length, dir);
+	else
+		dma_sync_single_for_cpu(dev, req->dma, req->length, dir);
 
-		uep->handler->irq_mask(uep, disable);
-		usbhs_fifo_disable(pipe);
-		usbhsg_queue_pop(uep, ureq, 0);
-	}
+	pkt->dma = DMA_ADDR_INVALID;
 
 	return 0;
 }
 
-static int usbhsg_prepare_receive_packet(struct usbhsg_uep *uep,
-					 struct usbhsg_request *ureq)
+static int usbhsg_dma_map_ctrl(struct usbhs_pkt *pkt, int map)
 {
-	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
-	int enable = 1;
-	int ret;
-
-	/*
-	 *********  assume under spin lock  *********
-	 */
-
-	ret = usbhs_fifo_prepare_read(pipe);
-	if (ret < 0)
-		return ret;
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhsg_uep *uep = usbhsg_pipe_to_uep(pipe);
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	enum dma_data_direction dir;
 
-	/*
-	 * data will be read in interrupt handler
-	 */
-	uep->handler->irq_mask(uep, enable);
+	dir = usbhs_pipe_is_dir_in(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
 
-	return ret;
+	if (map)
+		return usbhsg_dma_map(dev, pkt, dir);
+	else
+		return usbhsg_dma_unmap(dev, pkt, dir);
 }
 
-static struct usbhsg_pipe_handle usbhsg_handler_send_by_empty = {
-	.prepare	= usbhsg_prepare_send_packet,
-	.try_run	= usbhsg_try_run_send_packet,
-	.irq_mask	= usbhsg_irq_empty_ctrl,
-};
-
-static struct usbhsg_pipe_handle usbhsg_handler_send_by_ready = {
-	.prepare	= usbhsg_prepare_send_packet,
-	.try_run	= usbhsg_try_run_send_packet,
-	.irq_mask	= usbhsg_irq_ready_ctrl,
-};
-
-static struct usbhsg_pipe_handle usbhsg_handler_recv_by_ready = {
-	.prepare	= usbhsg_prepare_receive_packet,
-	.try_run	= usbhsg_try_run_receive_packet,
-	.irq_mask	= usbhsg_irq_ready_ctrl,
-};
-
-static struct usbhsg_pipe_handle usbhsg_handler_ctrl_stage_end = {
-	.prepare	= usbhsg_try_run_ctrl_stage_end,
-	.try_run	= usbhsg_try_run_ctrl_stage_end,
-};
-
-/*
- * DCP pipe can NOT use "ready interrupt" for "send"
- * it should use "empty" interrupt.
- * see
- *   "Operation" - "Interrupt Function" - "BRDY Interrupt"
- *
- * on the other hand, normal pipe can use "ready interrupt" for "send"
- * even though it is single/double buffer
- */
-#define usbhsg_handler_send_ctrl	usbhsg_handler_send_by_empty
-#define usbhsg_handler_recv_ctrl	usbhsg_handler_recv_by_ready
-
-#define usbhsg_handler_send_packet	usbhsg_handler_send_by_ready
-#define usbhsg_handler_recv_packet	usbhsg_handler_recv_by_ready
-
 /*
  *		USB_TYPE_STANDARD / clear feature functions
  */
@@ -546,15 +263,13 @@ static int usbhsg_recip_handler_std_clear_endpoint(struct usbhs_priv *priv,
 	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
 
 	if (!usbhsg_status_has(gpriv, USBHSG_STATUS_WEDGE)) {
-		usbhs_fifo_disable(pipe);
+		usbhs_pipe_disable(pipe);
 		usbhs_pipe_clear_sequence(pipe);
-		usbhs_fifo_enable(pipe);
+		usbhs_pipe_enable(pipe);
 	}
 
 	usbhsg_recip_handler_std_control_done(priv, uep, ctrl);
 
-	usbhsg_queue_prepare(uep);
-
 	return 0;
 }
 
@@ -575,6 +290,7 @@ static int usbhsg_recip_run_handle(struct usbhs_priv *priv,
 	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
 	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
 	struct usbhsg_uep *uep;
+	struct usbhs_pipe *pipe;
 	int recip = ctrl->bRequestType & USB_RECIP_MASK;
 	int nth = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
 	int ret;
@@ -583,9 +299,11 @@ static int usbhsg_recip_run_handle(struct usbhs_priv *priv,
 	char *msg;
 
 	uep = usbhsg_gpriv_to_nth_uep(gpriv, nth);
-	if (!usbhsg_uep_to_pipe(uep)) {
+	pipe = usbhsg_uep_to_pipe(uep);
+	if (!pipe) {
 		dev_err(dev, "wrong recip request\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto usbhsg_recip_run_handle_end;
 	}
 
 	switch (recip) {
@@ -608,10 +326,20 @@ static int usbhsg_recip_run_handle(struct usbhs_priv *priv,
 	}
 
 	if (func) {
+		unsigned long flags;
+
 		dev_dbg(dev, "%s (pipe %d :%s)\n", handler->name, nth, msg);
+
+		/********************  spin lock ********************/
+		usbhs_lock(priv, flags);
 		ret = func(priv, uep, ctrl);
+		usbhs_unlock(priv, flags);
+		/********************  spin unlock ******************/
 	}
 
+usbhsg_recip_run_handle_end:
+	usbhs_pkt_start(pipe);
+
 	return ret;
 }
 
@@ -660,13 +388,13 @@ static int usbhsg_irq_ctrl_stage(struct usbhs_priv *priv,
 
 	switch (stage) {
 	case READ_DATA_STAGE:
-		dcp->handler = &usbhsg_handler_send_ctrl;
+		dcp->handler = &usbhs_fifo_pio_push_handler;
 		break;
 	case WRITE_DATA_STAGE:
-		dcp->handler = &usbhsg_handler_recv_ctrl;
+		dcp->handler = &usbhs_fifo_pio_pop_handler;
 		break;
 	case NODATA_STATUS_STAGE:
-		dcp->handler = &usbhsg_handler_ctrl_stage_end;
+		dcp->handler = &usbhs_ctrl_stage_end_handler;
 		break;
 	default:
 		return ret;
@@ -695,128 +423,27 @@ static int usbhsg_irq_ctrl_stage(struct usbhs_priv *priv,
 		ret = gpriv->driver->setup(&gpriv->gadget, &ctrl);
 
 	if (ret < 0)
-		usbhs_fifo_stall(pipe);
+		usbhs_pipe_stall(pipe);
 
 	return ret;
 }
 
-static int usbhsg_irq_empty(struct usbhs_priv *priv,
-			    struct usbhs_irq_state *irq_state)
-{
-	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
-	struct usbhsg_uep *uep;
-	struct usbhs_pipe *pipe;
-	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
-	int i, ret;
-
-	if (!irq_state->bempsts) {
-		dev_err(dev, "debug %s !!\n", __func__);
-		return -EIO;
-	}
-
-	dev_dbg(dev, "irq empty [0x%04x]\n", irq_state->bempsts);
-
-	/*
-	 * search interrupted "pipe"
-	 * not "uep".
-	 */
-	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
-		if (!(irq_state->bempsts & (1 << i)))
-			continue;
-
-		uep	= usbhsg_pipe_to_uep(pipe);
-		ret	= usbhsg_queue_handle(uep);
-		if (ret < 0)
-			dev_err(dev, "send error %d : %d\n", i, ret);
-	}
-
-	return 0;
-}
-
-static int usbhsg_irq_ready(struct usbhs_priv *priv,
-			    struct usbhs_irq_state *irq_state)
-{
-	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
-	struct usbhsg_uep *uep;
-	struct usbhs_pipe *pipe;
-	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
-	int i, ret;
-
-	if (!irq_state->brdysts) {
-		dev_err(dev, "debug %s !!\n", __func__);
-		return -EIO;
-	}
-
-	dev_dbg(dev, "irq ready [0x%04x]\n", irq_state->brdysts);
-
-	/*
-	 * search interrupted "pipe"
-	 * not "uep".
-	 */
-	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
-		if (!(irq_state->brdysts & (1 << i)))
-			continue;
-
-		uep	= usbhsg_pipe_to_uep(pipe);
-		ret	= usbhsg_queue_handle(uep);
-		if (ret < 0)
-			dev_err(dev, "receive error %d : %d\n", i, ret);
-	}
-
-	return 0;
-}
-
 /*
  *
  *		usb_dcp_ops
  *
  */
-static int usbhsg_dcp_enable(struct usbhsg_uep *uep)
-{
-	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
-	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
-	struct usbhs_pipe *pipe;
-
-	/*
-	 *********  assume under spin lock  *********
-	 */
-
-	pipe = usbhs_dcp_malloc(priv);
-	if (!pipe)
-		return -EIO;
-
-	uep->pipe		= pipe;
-	uep->pipe->mod_private	= uep;
-	INIT_LIST_HEAD(&uep->list);
-
-	return 0;
-}
-
-#define usbhsg_dcp_disable usbhsg_pipe_disable
 static int usbhsg_pipe_disable(struct usbhsg_uep *uep)
 {
 	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
-	struct usbhsg_request *ureq;
-	int disable = 0;
-
-	/*
-	 *********  assume under spin lock  *********
-	 */
+	struct usbhs_pkt *pkt;
 
-	usbhs_fifo_disable(pipe);
-
-	/*
-	 * disable pipe irq
-	 */
-	usbhsg_irq_empty_ctrl(uep, disable);
-	usbhsg_irq_ready_ctrl(uep, disable);
+	usbhs_pipe_disable(pipe);
 
 	while (1) {
-		ureq = usbhsg_queue_get(uep);
-		if (!ureq)
+		pkt = usbhs_pkt_pop(pipe, NULL);
+		if (!pkt)
 			break;
-
-		usbhsg_queue_pop(uep, ureq, -ECONNRESET);
 	}
 
 	return 0;
@@ -843,57 +470,44 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
 	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
 	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 	struct usbhs_pipe *pipe;
-	spinlock_t *lock;
-	unsigned long flags;
 	int ret = -EIO;
 
 	/*
 	 * if it already have pipe,
 	 * nothing to do
 	 */
-	if (uep->pipe)
+	if (uep->pipe) {
+		usbhs_pipe_clear(uep->pipe);
+		usbhs_pipe_clear_sequence(uep->pipe);
 		return 0;
-
-	/********************  spin lock ********************/
-	lock = usbhsg_trylock(gpriv, &flags);
+	}
 
 	pipe = usbhs_pipe_malloc(priv, desc);
 	if (pipe) {
 		uep->pipe		= pipe;
 		pipe->mod_private	= uep;
-		INIT_LIST_HEAD(&uep->list);
 
+		/*
+		 * usbhs_fifo_dma_push/pop_handler try to
+		 * use dmaengine if possible.
+		 * It will use pio handler if impossible.
+		 */
 		if (usb_endpoint_dir_in(desc))
-			uep->handler = &usbhsg_handler_send_packet;
+			uep->handler = &usbhs_fifo_dma_push_handler;
 		else
-			uep->handler = &usbhsg_handler_recv_packet;
+			uep->handler = &usbhs_fifo_dma_pop_handler;
 
 		ret = 0;
 	}
 
-	usbhsg_unlock(lock, &flags);
-	/********************  spin unlock ******************/
-
 	return ret;
 }
 
 static int usbhsg_ep_disable(struct usb_ep *ep)
 {
 	struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
-	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
-	spinlock_t *lock;
-	unsigned long flags;
-	int ret;
-
-	/********************  spin lock ********************/
-	lock = usbhsg_trylock(gpriv, &flags);
 
-	ret = usbhsg_pipe_disable(uep);
-
-	usbhsg_unlock(lock, &flags);
-	/********************  spin unlock ******************/
-
-	return ret;
+	return usbhsg_pipe_disable(uep);
 }
 
 static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep,
@@ -905,7 +519,10 @@ static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep,
 	if (!ureq)
 		return NULL;
 
-	INIT_LIST_HEAD(&ureq->node);
+	usbhs_pkt_init(usbhsg_ureq_to_pkt(ureq));
+
+	ureq->req.dma = DMA_ADDR_INVALID;
+
 	return &ureq->req;
 }
 
@@ -914,7 +531,7 @@ static void usbhsg_ep_free_request(struct usb_ep *ep,
 {
 	struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
 
-	WARN_ON(!list_empty(&ureq->node));
+	WARN_ON(!list_empty(&ureq->pkt.node));
 	kfree(ureq);
 }
 
@@ -925,69 +542,27 @@ static int usbhsg_ep_queue(struct usb_ep *ep, struct usb_request *req,
 	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
 	struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
 	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
-	spinlock_t *lock;
-	unsigned long flags;
-	int ret = 0;
-
-	/*
-	 * CAUTION [*endpoint queue*]
-	 *
-	 * This function will be called from usb_request :: complete
-	 * or usb driver timing.
-	 * If this function is called from usb_request :: complete,
-	 * it is already under spinlock on this driver.
-	 * but it is called frm usb driver, this function should call spinlock.
-	 *
-	 * This function is using usbshg_trylock to solve this issue.
-	 * if "is_locked" is 1, this mean this function lock it.
-	 * but if it is 0, this mean it is already under spin lock.
-	 * see also
-	 *   CAUTION [*queue handler*]
-	 *   CAUTION [*request complete*]
-	 */
-
-	/********************  spin lock ********************/
-	lock = usbhsg_trylock(gpriv, &flags);
 
 	/* param check */
 	if (usbhsg_is_not_connected(gpriv)	||
 	    unlikely(!gpriv->driver)		||
 	    unlikely(!pipe))
-		ret = -ESHUTDOWN;
-	else
-		usbhsg_queue_push(uep, ureq);
-
-	usbhsg_unlock(lock, &flags);
-	/********************  spin unlock ******************/
+		return -ESHUTDOWN;
 
-	usbhsg_queue_prepare(uep);
+	usbhsg_queue_push(uep, ureq);
 
-	return ret;
+	return 0;
 }
 
 static int usbhsg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 {
 	struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
 	struct usbhsg_request *ureq = usbhsg_req_to_ureq(req);
-	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
-	spinlock_t *lock;
-	unsigned long flags;
-
-	/*
-	 * see
-	 *   CAUTION [*queue handler*]
-	 *   CAUTION [*endpoint queue*]
-	 *   CAUTION [*request complete*]
-	 */
-
-	/********************  spin lock ********************/
-	lock = usbhsg_trylock(gpriv, &flags);
+	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
 
+	usbhs_pkt_pop(pipe, usbhsg_ureq_to_pkt(ureq));
 	usbhsg_queue_pop(uep, ureq, -ECONNRESET);
 
-	usbhsg_unlock(lock, &flags);
-	/********************  spin unlock ******************/
-
 	return 0;
 }
 
@@ -996,42 +571,32 @@ static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge)
 	struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep);
 	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
 	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
-	spinlock_t *lock;
 	unsigned long flags;
-	int ret = -EAGAIN;
 
-	/*
-	 * see
-	 *   CAUTION [*queue handler*]
-	 *   CAUTION [*endpoint queue*]
-	 *   CAUTION [*request complete*]
-	 */
+	usbhsg_pipe_disable(uep);
 
-	/********************  spin lock ********************/
-	lock = usbhsg_trylock(gpriv, &flags);
-	if (!usbhsg_queue_get(uep)) {
+	dev_dbg(dev, "set halt %d (pipe %d)\n",
+		halt, usbhs_pipe_number(pipe));
 
-		dev_dbg(dev, "set halt %d (pipe %d)\n",
-			halt, usbhs_pipe_number(pipe));
-
-		if (halt)
-			usbhs_fifo_stall(pipe);
-		else
-			usbhs_fifo_disable(pipe);
+	/********************  spin lock ********************/
+	usbhs_lock(priv, flags);
 
-		if (halt && wedge)
-			usbhsg_status_set(gpriv, USBHSG_STATUS_WEDGE);
-		else
-			usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE);
+	if (halt)
+		usbhs_pipe_stall(pipe);
+	else
+		usbhs_pipe_disable(pipe);
 
-		ret = 0;
-	}
+	if (halt && wedge)
+		usbhsg_status_set(gpriv, USBHSG_STATUS_WEDGE);
+	else
+		usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE);
 
-	usbhsg_unlock(lock, &flags);
+	usbhs_unlock(priv, flags);
 	/********************  spin unlock ******************/
 
-	return ret;
+	return 0;
 }
 
 static int usbhsg_ep_set_halt(struct usb_ep *ep, int value)
@@ -1067,28 +632,40 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
 	struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv);
 	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 	struct device *dev = usbhs_priv_to_dev(priv);
-	spinlock_t *lock;
 	unsigned long flags;
+	int ret = 0;
 
 	/********************  spin lock ********************/
-	lock = usbhsg_trylock(gpriv, &flags);
+	usbhs_lock(priv, flags);
 
-	/*
-	 * enable interrupt and systems if ready
-	 */
 	usbhsg_status_set(gpriv, status);
 	if (!(usbhsg_status_has(gpriv, USBHSG_STATUS_STARTED) &&
 	      usbhsg_status_has(gpriv, USBHSG_STATUS_REGISTERD)))
-		goto usbhsg_try_start_unlock;
+		ret = -1; /* not ready */
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ********************/
+
+	if (ret < 0)
+		return 0; /* not ready is not error */
 
+	/*
+	 * enable interrupt and systems if ready
+	 */
 	dev_dbg(dev, "start gadget\n");
 
 	/*
 	 * pipe initialize and enable DCP
 	 */
-	usbhs_pipe_init(priv);
+	usbhs_pipe_init(priv,
+			usbhsg_queue_done,
+			usbhsg_dma_map_ctrl);
+	usbhs_fifo_init(priv);
 	usbhsg_uep_init(gpriv);
-	usbhsg_dcp_enable(dcp);
+
+	/* dcp init */
+	dcp->pipe		= usbhs_dcp_malloc(priv);
+	dcp->pipe->mod_private	= dcp;
 
 	/*
 	 * system config enble
@@ -1105,16 +682,8 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
 	 */
 	mod->irq_dev_state	= usbhsg_irq_dev_state;
 	mod->irq_ctrl_stage	= usbhsg_irq_ctrl_stage;
-	mod->irq_empty		= usbhsg_irq_empty;
-	mod->irq_ready		= usbhsg_irq_ready;
-	mod->irq_bempsts	= 0;
-	mod->irq_brdysts	= 0;
 	usbhs_irq_callback_update(priv, mod);
 
-usbhsg_try_start_unlock:
-	usbhsg_unlock(lock, &flags);
-	/********************  spin unlock ********************/
-
 	return 0;
 }
 
@@ -1124,31 +693,33 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status)
 	struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 	struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv);
 	struct device *dev = usbhs_priv_to_dev(priv);
-	spinlock_t *lock;
 	unsigned long flags;
+	int ret = 0;
 
 	/********************  spin lock ********************/
-	lock = usbhsg_trylock(gpriv, &flags);
+	usbhs_lock(priv, flags);
 
-	/*
-	 * disable interrupt and systems if 1st try
-	 */
 	usbhsg_status_clr(gpriv, status);
 	if (!usbhsg_status_has(gpriv, USBHSG_STATUS_STARTED) &&
 	    !usbhsg_status_has(gpriv, USBHSG_STATUS_REGISTERD))
-		goto usbhsg_try_stop_unlock;
+		ret = -1; /* already done */
+
+	usbhs_unlock(priv, flags);
+	/********************  spin unlock ********************/
+
+	if (ret < 0)
+		return 0; /* already done is not error */
+
+	/*
+	 * disable interrupt and systems if 1st try
+	 */
+	usbhs_fifo_quit(priv);
 
 	/* disable all irq */
 	mod->irq_dev_state	= NULL;
 	mod->irq_ctrl_stage	= NULL;
-	mod->irq_empty		= NULL;
-	mod->irq_ready		= NULL;
-	mod->irq_bempsts	= 0;
-	mod->irq_brdysts	= 0;
 	usbhs_irq_callback_update(priv, mod);
 
-	usbhsg_dcp_disable(dcp);
-
 	gpriv->gadget.speed = USB_SPEED_UNKNOWN;
 
 	/* disable sys */
@@ -1156,8 +727,7 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status)
 	usbhs_sys_function_ctrl(priv, 0);
 	usbhs_sys_usb_ctrl(priv, 0);
 
-	usbhsg_unlock(lock, &flags);
-	/********************  spin unlock ********************/
+	usbhsg_pipe_disable(dcp);
 
 	if (gpriv->driver &&
 	    gpriv->driver->disconnect)
@@ -1166,11 +736,6 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status)
 	dev_dbg(dev, "stop gadget\n");
 
 	return 0;
-
-usbhsg_try_stop_unlock:
-	usbhsg_unlock(lock, &flags);
-
-	return 0;
 }
 
 /*
@@ -1178,11 +743,10 @@ usbhsg_try_stop_unlock:
  *		linux usb function
  *
  */
-struct usbhsg_gpriv *the_controller;
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+static int usbhsg_gadget_start(struct usb_gadget_driver *driver,
 			    int (*bind)(struct usb_gadget *))
 {
-	struct usbhsg_gpriv *gpriv = the_controller;
+	struct usbhsg_gpriv *gpriv;
 	struct usbhs_priv *priv;
 	struct device *dev;
 	int ret;
@@ -1192,10 +756,17 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	    !driver->setup	||
 	    driver->speed != USB_SPEED_HIGH)
 		return -EINVAL;
-	if (!gpriv)
-		return -ENODEV;
-	if (gpriv->driver)
-		return -EBUSY;
+
+	/*
+	 * find unused controller
+	 */
+	usbhsg_for_each_controller(gpriv) {
+		if (!gpriv->driver)
+			goto find_unused_controller;
+	}
+	return -ENODEV;
+
+find_unused_controller:
 
 	dev  = usbhsg_gpriv_to_dev(gpriv);
 	priv = usbhsg_gpriv_to_priv(gpriv);
@@ -1229,22 +800,28 @@ add_fail:
 
 	return ret;
 }
-EXPORT_SYMBOL(usb_gadget_probe_driver);
 
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int usbhsg_gadget_stop(struct usb_gadget_driver *driver)
 {
-	struct usbhsg_gpriv *gpriv = the_controller;
+	struct usbhsg_gpriv *gpriv;
 	struct usbhs_priv *priv;
-	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
-
-	if (!gpriv)
-		return -ENODEV;
+	struct device *dev;
 
 	if (!driver		||
-	    !driver->unbind	||
-	    driver != gpriv->driver)
+	    !driver->unbind)
 		return -EINVAL;
 
+	/*
+	 * find controller
+	 */
+	usbhsg_for_each_controller(gpriv) {
+		if (gpriv->driver == driver)
+			goto find_matching_controller;
+	}
+	return -ENODEV;
+
+find_matching_controller:
+
 	dev  = usbhsg_gpriv_to_dev(gpriv);
 	priv = usbhsg_gpriv_to_priv(gpriv);
 
@@ -1260,7 +837,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	return 0;
 }
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
 
 /*
  *		usb gadget ops
@@ -1275,6 +851,8 @@ static int usbhsg_get_frame(struct usb_gadget *gadget)
 
 static struct usb_gadget_ops usbhsg_gadget_ops = {
 	.get_frame		= usbhsg_get_frame,
+	.start			= usbhsg_gadget_start,
+	.stop			= usbhsg_gadget_stop,
 };
 
 static int usbhsg_start(struct usbhs_priv *priv)
@@ -1294,6 +872,7 @@ int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 	struct device *dev = usbhs_priv_to_dev(priv);
 	int pipe_size = usbhs_get_dparam(priv, pipe_size);
 	int i;
+	int ret;
 
 	gpriv = kzalloc(sizeof(struct usbhsg_gpriv), GFP_KERNEL);
 	if (!gpriv) {
@@ -1304,6 +883,7 @@ int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 	uep = kzalloc(sizeof(struct usbhsg_uep) * pipe_size, GFP_KERNEL);
 	if (!uep) {
 		dev_err(dev, "Could not allocate ep\n");
+		ret = -ENOMEM;
 		goto usbhs_mod_gadget_probe_err_gpriv;
 	}
 
@@ -1350,7 +930,6 @@ int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 		uep->ep.name		= uep->ep_name;
 		uep->ep.ops		= &usbhsg_ep_ops;
 		INIT_LIST_HEAD(&uep->ep.ep_list);
-		INIT_LIST_HEAD(&uep->list);
 
 		/* init DCP */
 		if (usbhsg_is_dcp(uep)) {
@@ -1364,22 +943,33 @@ int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv)
 		}
 	}
 
-	the_controller = gpriv;
+	usbhsg_controller_register(gpriv);
+
+	ret = usb_add_gadget_udc(dev, &gpriv->gadget);
+	if (ret)
+		goto err_add_udc;
+
 
 	dev_info(dev, "gadget probed\n");
 
 	return 0;
+err_add_udc:
+	kfree(gpriv->uep);
 
 usbhs_mod_gadget_probe_err_gpriv:
 	kfree(gpriv);
 
-	return -ENOMEM;
+	return ret;
 }
 
 void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv)
 {
 	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
 
+	usb_del_gadget_udc(&gpriv->gadget);
+
+	usbhsg_controller_unregister(gpriv);
+
 	kfree(gpriv->uep);
 	kfree(gpriv);
 }
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index bc4521c5426..1b14cae4570 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -15,7 +15,6 @@
  *
  */
 #include <linux/delay.h>
-#include <linux/io.h>
 #include <linux/slab.h>
 #include "./common.h"
 #include "./pipe.h"
@@ -23,13 +22,8 @@
 /*
  *		macros
  */
-#define usbhsp_priv_to_pipeinfo(pr)	(&(pr)->pipe_info)
-#define usbhsp_pipe_to_priv(p)		((p)->priv)
-
 #define usbhsp_addr_offset(p)	((usbhs_pipe_number(p) - 1) * 2)
 
-#define usbhsp_is_dcp(p)	((p)->priv->pipe_info.pipe == (p))
-
 #define usbhsp_flags_set(p, f)	((p)->flags |=  USBHS_PIPE_FLAGS_##f)
 #define usbhsp_flags_clr(p, f)	((p)->flags &= ~USBHS_PIPE_FLAGS_##f)
 #define usbhsp_flags_has(p, f)	((p)->flags &   USBHS_PIPE_FLAGS_##f)
@@ -77,10 +71,10 @@ void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
  */
 static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
 {
-	struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe);
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 	int offset = usbhsp_addr_offset(pipe);
 
-	if (usbhsp_is_dcp(pipe))
+	if (usbhs_pipe_is_dcp(pipe))
 		usbhs_bset(priv, DCPCTR, mask, val);
 	else
 		usbhs_bset(priv, PIPEnCTR + offset, mask, val);
@@ -88,10 +82,10 @@ static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
 
 static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe)
 {
-	struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe);
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 	int offset = usbhsp_addr_offset(pipe);
 
-	if (usbhsp_is_dcp(pipe))
+	if (usbhs_pipe_is_dcp(pipe))
 		return usbhs_read(priv, DCPCTR);
 	else
 		return usbhs_read(priv, PIPEnCTR + offset);
@@ -104,9 +98,9 @@ static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe,
 				  u16 dcp_reg, u16 pipe_reg,
 				  u16 mask, u16 val)
 {
-	struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe);
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 
-	if (usbhsp_is_dcp(pipe))
+	if (usbhs_pipe_is_dcp(pipe))
 		usbhs_bset(priv, dcp_reg, mask, val);
 	else
 		usbhs_bset(priv, pipe_reg, mask, val);
@@ -115,9 +109,9 @@ static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe,
 static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe,
 				 u16 dcp_reg, u16 pipe_reg)
 {
-	struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe);
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 
-	if (usbhsp_is_dcp(pipe))
+	if (usbhs_pipe_is_dcp(pipe))
 		return usbhs_read(priv, dcp_reg);
 	else
 		return usbhs_read(priv, pipe_reg);
@@ -136,7 +130,7 @@ static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
  */
 static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
 {
-	if (usbhsp_is_dcp(pipe))
+	if (usbhs_pipe_is_dcp(pipe))
 		return;
 
 	__usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val);
@@ -160,7 +154,7 @@ static u16 usbhsp_pipe_maxp_get(struct usbhs_pipe *pipe)
  */
 static void usbhsp_pipe_select(struct usbhs_pipe *pipe)
 {
-	struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe);
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 
 	/*
 	 * On pipe, this is necessary before
@@ -182,7 +176,7 @@ static void usbhsp_pipe_select(struct usbhs_pipe *pipe)
 
 static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe)
 {
-	struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe);
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 	int timeout = 1024;
 	u16 val;
 
@@ -205,7 +199,7 @@ static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe)
 	 *   - "Pipe Control Registers Switching Procedure"
 	 */
 	usbhs_write(priv, CFIFOSEL, 0);
-	usbhs_fifo_disable(pipe);
+	usbhs_pipe_disable(pipe);
 
 	do {
 		val  = usbhsp_pipectrl_get(pipe);
@@ -220,7 +214,7 @@ static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe)
 	return -EBUSY;
 }
 
-static int usbhsp_pipe_is_accessible(struct usbhs_pipe *pipe)
+int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe)
 {
 	u16 val;
 
@@ -253,7 +247,7 @@ static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe)
 	}
 }
 
-void usbhs_fifo_disable(struct usbhs_pipe *pipe)
+void usbhs_pipe_disable(struct usbhs_pipe *pipe)
 {
 	int timeout = 1024;
 	u16 val;
@@ -273,7 +267,7 @@ void usbhs_fifo_disable(struct usbhs_pipe *pipe)
 	} while (timeout--);
 }
 
-void usbhs_fifo_enable(struct usbhs_pipe *pipe)
+void usbhs_pipe_enable(struct usbhs_pipe *pipe)
 {
 	/* see "Pipe n Control Register" - "PID" */
 	__usbhsp_pid_try_nak_if_stall(pipe);
@@ -281,7 +275,7 @@ void usbhs_fifo_enable(struct usbhs_pipe *pipe)
 	usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF);
 }
 
-void usbhs_fifo_stall(struct usbhs_pipe *pipe)
+void usbhs_pipe_stall(struct usbhs_pipe *pipe)
 {
 	u16 pid = usbhsp_pipectrl_get(pipe);
 
@@ -302,191 +296,6 @@ void usbhs_fifo_stall(struct usbhs_pipe *pipe)
 }
 
 /*
- *		CFIFO ctrl
- */
-void usbhs_fifo_send_terminator(struct usbhs_pipe *pipe)
-{
-	struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe);
-
-	usbhs_bset(priv, CFIFOCTR, BVAL, BVAL);
-}
-
-static void usbhsp_fifo_clear(struct usbhs_pipe *pipe)
-{
-	struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe);
-
-	usbhs_write(priv, CFIFOCTR, BCLR);
-}
-
-static int usbhsp_fifo_barrier(struct usbhs_priv *priv)
-{
-	int timeout = 1024;
-
-	do {
-		/* The FIFO port is accessible */
-		if (usbhs_read(priv, CFIFOCTR) & FRDY)
-			return 0;
-
-		udelay(10);
-	} while (timeout--);
-
-	return -EBUSY;
-}
-
-static int usbhsp_fifo_rcv_len(struct usbhs_priv *priv)
-{
-	return usbhs_read(priv, CFIFOCTR) & DTLN_MASK;
-}
-
-static int usbhsp_fifo_select(struct usbhs_pipe *pipe, int write)
-{
-	struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe);
-	struct device *dev = usbhs_priv_to_dev(priv);
-	int timeout = 1024;
-	u16 mask = ((1 << 5) | 0xF);		/* mask of ISEL | CURPIPE */
-	u16 base = usbhs_pipe_number(pipe);	/* CURPIPE */
-
-	if (usbhsp_is_dcp(pipe))
-		base |= (1 == write) << 5;	/* ISEL */
-
-	/* "base" will be used below  */
-	usbhs_write(priv, CFIFOSEL, base | MBW_32);
-
-	/* check ISEL and CURPIPE value */
-	while (timeout--) {
-		if (base == (mask & usbhs_read(priv, CFIFOSEL)))
-			return 0;
-		udelay(10);
-	}
-
-	dev_err(dev, "fifo select error\n");
-
-	return -EIO;
-}
-
-int usbhs_fifo_prepare_write(struct usbhs_pipe *pipe)
-{
-	return usbhsp_fifo_select(pipe, 1);
-}
-
-int usbhs_fifo_write(struct usbhs_pipe *pipe, u8 *buf, int len)
-{
-	struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe);
-	void __iomem *addr = priv->base + CFIFO;
-	int maxp = usbhs_pipe_get_maxpacket(pipe);
-	int total_len;
-	int i, ret;
-
-	ret = usbhsp_pipe_is_accessible(pipe);
-	if (ret < 0)
-		return ret;
-
-	ret = usbhsp_fifo_select(pipe, 1);
-	if (ret < 0)
-		return ret;
-
-	ret = usbhsp_fifo_barrier(priv);
-	if (ret < 0)
-		return ret;
-
-	len = min(len, maxp);
-	total_len = len;
-
-	/*
-	 * FIXME
-	 *
-	 * 32-bit access only
-	 */
-	if (len >= 4 &&
-	    !((unsigned long)buf & 0x03)) {
-		iowrite32_rep(addr, buf, len / 4);
-		len %= 4;
-		buf += total_len - len;
-	}
-
-	/* the rest operation */
-	for (i = 0; i < len; i++)
-		iowrite8(buf[i], addr + (0x03 - (i & 0x03)));
-
-	if (total_len < maxp)
-		usbhs_fifo_send_terminator(pipe);
-
-	return total_len;
-}
-
-int usbhs_fifo_prepare_read(struct usbhs_pipe *pipe)
-{
-	int ret;
-
-	/*
-	 * select pipe and enable it to prepare packet receive
-	 */
-	ret = usbhsp_fifo_select(pipe, 0);
-	if (ret < 0)
-		return ret;
-
-	usbhs_fifo_enable(pipe);
-
-	return ret;
-}
-
-int usbhs_fifo_read(struct usbhs_pipe *pipe, u8 *buf, int len)
-{
-	struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe);
-	void __iomem *addr = priv->base + CFIFO;
-	int rcv_len;
-	int i, ret;
-	int total_len;
-	u32 data = 0;
-
-	ret = usbhsp_fifo_select(pipe, 0);
-	if (ret < 0)
-		return ret;
-
-	ret = usbhsp_fifo_barrier(priv);
-	if (ret < 0)
-		return ret;
-
-	rcv_len = usbhsp_fifo_rcv_len(priv);
-
-	/*
-	 * Buffer clear if Zero-Length packet
-	 *
-	 * see
-	 * "Operation" - "FIFO Buffer Memory" - "FIFO Port Function"
-	 */
-	if (0 == rcv_len) {
-		usbhsp_fifo_clear(pipe);
-		return 0;
-	}
-
-	len = min(rcv_len, len);
-	total_len = len;
-
-	/*
-	 * FIXME
-	 *
-	 * 32-bit access only
-	 */
-	if (len >= 4 &&
-	    !((unsigned long)buf & 0x03)) {
-		ioread32_rep(addr, buf, len / 4);
-		len %= 4;
-		buf += rcv_len - len;
-	}
-
-	/* the rest operation */
-	for (i = 0; i < len; i++) {
-		if (!(i & 0x03))
-			data = ioread32(addr);
-
-		buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
-	}
-
-	return total_len;
-}
-
-/*
  *		pipe setup
  */
 static int usbhsp_possible_double_buffer(struct usbhs_pipe *pipe)
@@ -519,7 +328,7 @@ static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe,
 	};
 	int is_double = usbhsp_possible_double_buffer(pipe);
 
-	if (usbhsp_is_dcp(pipe))
+	if (usbhs_pipe_is_dcp(pipe))
 		return -EINVAL;
 
 	/*
@@ -550,12 +359,15 @@ static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe,
 
 	/* DIR */
 	if (usb_endpoint_dir_in(desc))
-		usbhsp_flags_set(pipe, IS_DIR_IN);
+		usbhsp_flags_set(pipe, IS_DIR_HOST);
 
 	if ((is_host  && usb_endpoint_dir_out(desc)) ||
 	    (!is_host && usb_endpoint_dir_in(desc)))
 		dir |= DIR_OUT;
 
+	if (!dir)
+		usbhsp_flags_set(pipe, IS_DIR_IN);
+
 	/* SHTNAK */
 	if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK) &&
 	    !dir)
@@ -587,8 +399,8 @@ static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe,
 				 const struct usb_endpoint_descriptor *desc,
 				 int is_host)
 {
-	struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe);
-	struct usbhs_pipe_info *info = usbhsp_priv_to_pipeinfo(priv);
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
 	struct device *dev = usbhs_priv_to_dev(priv);
 	int pipe_num = usbhs_pipe_number(pipe);
 	int is_double = usbhsp_possible_double_buffer(pipe);
@@ -666,7 +478,7 @@ static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe,
  */
 int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe)
 {
-	u16 mask = usbhsp_is_dcp(pipe) ? DCP_MAXP_MASK : PIPE_MAXP_MASK;
+	u16 mask = usbhs_pipe_is_dcp(pipe) ? DCP_MAXP_MASK : PIPE_MAXP_MASK;
 
 	usbhsp_pipe_select(pipe);
 
@@ -678,11 +490,22 @@ int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe)
 	return usbhsp_flags_has(pipe, IS_DIR_IN);
 }
 
+int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe)
+{
+	return usbhsp_flags_has(pipe, IS_DIR_HOST);
+}
+
 void usbhs_pipe_clear_sequence(struct usbhs_pipe *pipe)
 {
 	usbhsp_pipectrl_set(pipe, SQCLR, SQCLR);
 }
 
+void usbhs_pipe_clear(struct usbhs_pipe *pipe)
+{
+	usbhsp_pipectrl_set(pipe, ACLRM, ACLRM);
+	usbhsp_pipectrl_set(pipe, ACLRM, 0);
+}
+
 static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
 {
 	struct usbhs_pipe *pos, *pipe;
@@ -714,12 +537,20 @@ static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
 	return pipe;
 }
 
-void usbhs_pipe_init(struct usbhs_priv *priv)
+void usbhs_pipe_init(struct usbhs_priv *priv,
+		     void (*done)(struct usbhs_pkt *pkt),
+		     int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map))
 {
-	struct usbhs_pipe_info *info = usbhsp_priv_to_pipeinfo(priv);
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
+	struct device *dev = usbhs_priv_to_dev(priv);
 	struct usbhs_pipe *pipe;
 	int i;
 
+	if (!done) {
+		dev_err(dev, "no done function\n");
+		return;
+	}
+
 	/*
 	 * FIXME
 	 *
@@ -738,10 +569,16 @@ void usbhs_pipe_init(struct usbhs_priv *priv)
 			info->bufnmb_last++;
 
 		usbhsp_flags_init(pipe);
+		pipe->fifo = NULL;
 		pipe->mod_private = NULL;
+		INIT_LIST_HEAD(&pipe->list);
 
-		usbhsp_fifo_clear(pipe);
+		/* pipe force init */
+		usbhs_pipe_clear(pipe);
 	}
+
+	info->done = done;
+	info->dma_map_ctrl = dma_map_ctrl;
 }
 
 struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
@@ -761,7 +598,9 @@ struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
 		return NULL;
 	}
 
-	usbhs_fifo_disable(pipe);
+	INIT_LIST_HEAD(&pipe->list);
+
+	usbhs_pipe_disable(pipe);
 
 	/* make sure pipe is not busy */
 	ret = usbhsp_pipe_barrier(pipe);
@@ -774,11 +613,6 @@ struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
 	pipebuf  = usbhsp_setup_pipebuff(pipe, desc, is_host);
 	pipemaxp = usbhsp_setup_pipemaxp(pipe, desc, is_host);
 
-	/* buffer clear
-	 * see PIPECFG :: BFRE */
-	usbhsp_pipectrl_set(pipe, ACLRM, ACLRM);
-	usbhsp_pipectrl_set(pipe, ACLRM, 0);
-
 	usbhsp_pipe_select(pipe);
 	usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg);
 	usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf);
@@ -794,6 +628,18 @@ struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
 	return pipe;
 }
 
+void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo)
+{
+	if (pipe->fifo)
+		pipe->fifo->pipe = NULL;
+
+	pipe->fifo = fifo;
+
+	if (fifo)
+		fifo->pipe = pipe;
+}
+
+
 /*
  *		dcp control
  */
@@ -813,25 +659,25 @@ struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv)
 
 	usbhsp_pipe_select(pipe);
 	usbhs_pipe_clear_sequence(pipe);
+	INIT_LIST_HEAD(&pipe->list);
 
 	return pipe;
 }
 
 void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe)
 {
-	WARN_ON(!usbhsp_is_dcp(pipe));
+	WARN_ON(!usbhs_pipe_is_dcp(pipe));
 
-	usbhs_fifo_enable(pipe);
+	usbhs_pipe_enable(pipe);
 	usbhsp_pipectrl_set(pipe, CCPL, CCPL);
 }
 
-
 /*
  *		pipe module function
  */
 int usbhs_pipe_probe(struct usbhs_priv *priv)
 {
-	struct usbhs_pipe_info *info = usbhsp_priv_to_pipeinfo(priv);
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
 	struct usbhs_pipe *pipe;
 	struct device *dev = usbhs_priv_to_dev(priv);
 	u32 *pipe_type = usbhs_get_dparam(priv, pipe_type);
@@ -868,7 +714,7 @@ int usbhs_pipe_probe(struct usbhs_priv *priv)
 
 void usbhs_pipe_remove(struct usbhs_priv *priv)
 {
-	struct usbhs_pipe_info *info = usbhsp_priv_to_pipeinfo(priv);
+	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
 
 	kfree(info->pipe);
 }
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
index 1cca9b7fb26..41534cb0e73 100644
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -18,6 +18,7 @@
 #define RENESAS_USB_PIPE_H
 
 #include "./common.h"
+#include "./fifo.h"
 
 /*
  *	struct
@@ -26,10 +27,13 @@ struct usbhs_pipe {
 	u32 pipe_type;	/* USB_ENDPOINT_XFER_xxx */
 
 	struct usbhs_priv *priv;
+	struct usbhs_fifo *fifo;
+	struct list_head list;
 
 	u32 flags;
 #define USBHS_PIPE_FLAGS_IS_USED		(1 << 0)
 #define USBHS_PIPE_FLAGS_IS_DIR_IN		(1 << 1)
+#define USBHS_PIPE_FLAGS_IS_DIR_HOST		(1 << 2)
 
 	void *mod_private;
 };
@@ -38,6 +42,9 @@ struct usbhs_pipe_info {
 	struct usbhs_pipe *pipe;
 	int size;	/* array size of "pipe" */
 	int bufnmb_last;	/* FIXME : driver needs good allocator */
+
+	void (*done)(struct usbhs_pkt *pkt);
+	int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map);
 };
 
 /*
@@ -55,25 +62,9 @@ struct usbhs_pipe_info {
 	__usbhs_for_each_pipe(0, pos, &((priv)->pipe_info), i)
 
 /*
- * pipe module probe / remove
+ * data
  */
-int usbhs_pipe_probe(struct usbhs_priv *priv);
-void usbhs_pipe_remove(struct usbhs_priv *priv);
-
-/*
- * cfifo
- */
-int usbhs_fifo_write(struct usbhs_pipe *pipe, u8 *buf, int len);
-int usbhs_fifo_read(struct usbhs_pipe *pipe, u8 *buf, int len);
-int usbhs_fifo_prepare_write(struct usbhs_pipe *pipe);
-int usbhs_fifo_prepare_read(struct usbhs_pipe *pipe);
-
-void usbhs_fifo_enable(struct usbhs_pipe *pipe);
-void usbhs_fifo_disable(struct usbhs_pipe *pipe);
-void usbhs_fifo_stall(struct usbhs_pipe *pipe);
-
-void usbhs_fifo_send_terminator(struct usbhs_pipe *pipe);
-
+#define usbhs_priv_to_pipeinfo(pr)	(&(pr)->pipe_info)
 
 /*
  * usb request
@@ -87,13 +78,27 @@ void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
 struct usbhs_pipe
 *usbhs_pipe_malloc(struct usbhs_priv *priv,
 		   const struct usb_endpoint_descriptor *desc);
-
+int usbhs_pipe_probe(struct usbhs_priv *priv);
+void usbhs_pipe_remove(struct usbhs_priv *priv);
 int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe);
-void usbhs_pipe_init(struct usbhs_priv *priv);
+int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe);
+void usbhs_pipe_init(struct usbhs_priv *priv,
+		     void (*done)(struct usbhs_pkt *pkt),
+		     int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map));
 int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe);
 void usbhs_pipe_clear_sequence(struct usbhs_pipe *pipe);
-
+void usbhs_pipe_clear(struct usbhs_pipe *pipe);
+int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe);
+void usbhs_pipe_enable(struct usbhs_pipe *pipe);
+void usbhs_pipe_disable(struct usbhs_pipe *pipe);
+void usbhs_pipe_stall(struct usbhs_pipe *pipe);
+void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo);
+
+#define usbhs_pipe_to_priv(p)	((p)->priv)
 #define usbhs_pipe_number(p)	(int)((p) - (p)->priv->pipe_info.pipe)
+#define usbhs_pipe_is_dcp(p)	((p)->priv->pipe_info.pipe == (p))
+#define usbhs_pipe_to_fifo(p)	((p)->fifo)
+#define usbhs_pipe_is_busy(p)	usbhs_pipe_to_fifo(p)
 
 /*
  * dcp control
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 30461fcc220..1d33260de01 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,6 +91,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
+	{ USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
@@ -342,10 +343,28 @@ static void pl2303_set_termios(struct tty_struct *tty,
 				baud = 6000000;
 		}
 		dbg("%s - baud set = %d", __func__, baud);
-		buf[0] = baud & 0xff;
-		buf[1] = (baud >> 8) & 0xff;
-		buf[2] = (baud >> 16) & 0xff;
-		buf[3] = (baud >> 24) & 0xff;
+		if (baud <= 115200) {
+			buf[0] = baud & 0xff;
+			buf[1] = (baud >> 8) & 0xff;
+			buf[2] = (baud >> 16) & 0xff;
+			buf[3] = (baud >> 24) & 0xff;
+		} else {
+			/* apparently the formula for higher speeds is:
+			 * baudrate = 12M * 32 / (2^buf[1]) / buf[0]
+			 */
+			unsigned tmp = 12*1000*1000*32 / baud;
+			buf[3] = 0x80;
+			buf[2] = 0;
+			buf[1] = (tmp >= 256);
+			while (tmp >= 256) {
+				tmp >>= 2;
+				buf[1] <<= 1;
+			}
+			if (tmp > 256) {
+				tmp %= 256;
+			}
+			buf[0] = tmp;
+		}
 	}
 
 	/* For reference buf[4]=0 is 1 stop bits */
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 1b025f75daf..ca0d237683b 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -144,3 +144,7 @@
 /* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
 #define ADLINK_VENDOR_ID		0x0b63
 #define ADLINK_ND6530_PRODUCT_ID	0x6530
+
+/* WinChipHead USB->RS 232 adapter */
+#define WINCHIPHEAD_VENDOR_ID		0x4348
+#define WINCHIPHEAD_USBSER_PRODUCT_ID	0x5523
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 97987255be7..58aabe679c3 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -40,6 +40,10 @@ config USB_STORAGE_REALTEK
 
 	  If this driver is compiled as a module, it will be named ums-realtek.
 
+config REALTEK_AUTOPM
+	bool "Realtek Card Reader autosuspend support"
+	depends on USB_STORAGE_REALTEK && CONFIG_PM_RUNTIME
+	default y
 
 config USB_STORAGE_DATAFAB
 	tristate "Datafab Compact Flash Reader support"
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index d509a4a7d74..34adc4b42ce 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -24,7 +24,6 @@
 #include <linux/blkdev.h>
 #include <linux/kthread.h>
 #include <linux/sched.h>
-#include <linux/workqueue.h>
 #include <linux/kernel.h>
 #include <linux/version.h>
 
@@ -51,6 +50,35 @@ static int auto_delink_en = 1;
 module_param(auto_delink_en, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(auto_delink_en, "enable auto delink");
 
+#ifdef CONFIG_REALTEK_AUTOPM
+static int ss_en = 1;
+module_param(ss_en, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ss_en, "enable selective suspend");
+
+static int ss_delay = 50;
+module_param(ss_delay, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ss_delay,
+		 "seconds to delay before entering selective suspend");
+
+enum RTS51X_STAT {
+	RTS51X_STAT_INIT,
+	RTS51X_STAT_IDLE,
+	RTS51X_STAT_RUN,
+	RTS51X_STAT_SS
+};
+
+#define POLLING_INTERVAL	50
+
+#define rts51x_set_stat(chip, stat)	\
+	((chip)->state = (enum RTS51X_STAT)(stat))
+#define rts51x_get_stat(chip)		((chip)->state)
+
+#define SET_LUN_READY(chip, lun)	((chip)->lun_ready |= ((u8)1 << (lun)))
+#define CLR_LUN_READY(chip, lun)	((chip)->lun_ready &= ~((u8)1 << (lun)))
+#define TST_LUN_READY(chip, lun)	((chip)->lun_ready & ((u8)1 << (lun)))
+
+#endif
+
 struct rts51x_status {
 	u16 vid;
 	u16 pid;
@@ -70,14 +98,25 @@ struct rts51x_status {
 };
 
 struct rts51x_chip {
-	u16			vendor_id;
-	u16			product_id;
-	char			max_lun;
+	u16 vendor_id;
+	u16 product_id;
+	char max_lun;
 
-	struct rts51x_status	*status;
-	int			status_len;
+	struct rts51x_status *status;
+	int status_len;
 
-	u32			flag;
+	u32 flag;
+#ifdef CONFIG_REALTEK_AUTOPM
+	struct us_data *us;
+	struct timer_list rts51x_suspend_timer;
+	unsigned long timer_expires;
+	int pwr_state;
+	u8 lun_ready;
+	enum RTS51X_STAT state;
+	int support_auto_delink;
+#endif
+	/* used to back up the protocal choosen in probe1 phase */
+	proto_cmnd proto_handler_backup;
 };
 
 /* flag definition */
@@ -97,9 +136,14 @@ struct rts51x_chip {
 #define RTS51X_GET_VID(chip)		((chip)->vendor_id)
 #define RTS51X_GET_PID(chip)		((chip)->product_id)
 
+#define VENDOR_ID(chip)			((chip)->status[0].vid)
+#define PRODUCT_ID(chip)		((chip)->status[0].pid)
 #define FW_VERSION(chip)		((chip)->status[0].fw_ver)
 #define STATUS_LEN(chip)		((chip)->status_len)
 
+#define STATUS_SUCCESS		0
+#define STATUS_FAIL		1
+
 /* Check card reader function */
 #define SUPPORT_DETAILED_TYPE1(chip)	\
 		CHK_BIT((chip)->status[0].function[0], 1)
@@ -119,15 +163,6 @@ struct rts51x_chip {
 #define CHECK_ID(chip, pid, fw_ver)	\
 		(CHECK_PID((chip), (pid)) && CHECK_FW_VER((chip), (fw_ver)))
 
-#define wait_timeout_x(task_state, msecs)	\
-do {						\
-	set_current_state((task_state));	\
-	schedule_timeout((msecs) * HZ / 1000);	\
-} while (0)
-
-#define wait_timeout(msecs)		\
-		wait_timeout_x(TASK_INTERRUPTIBLE, (msecs))
-
 static int init_realtek_cr(struct us_data *us);
 
 /*
@@ -143,8 +178,9 @@ static int init_realtek_cr(struct us_data *us);
 
 static const struct usb_device_id realtek_cr_ids[] = {
 #	include "unusual_realtek.h"
-	{ }		/* Terminating entry */
+	{}			/* Terminating entry */
 };
+
 MODULE_DEVICE_TABLE(usb, realtek_cr_ids);
 
 #undef UNUSUAL_DEV
@@ -165,7 +201,7 @@ MODULE_DEVICE_TABLE(usb, realtek_cr_ids);
 
 static struct us_unusual_dev realtek_cr_unusual_dev_list[] = {
 #	include "unusual_realtek.h"
-	{ }		/* Terminating entry */
+	{}			/* Terminating entry */
 };
 
 #undef UNUSUAL_DEV
@@ -174,8 +210,8 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun,
 				 u8 *cmd, int cmd_len, u8 *buf, int buf_len,
 				 enum dma_data_direction dir, int *act_len)
 {
-	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
-	struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf;
+	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *)us->iobuf;
+	struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *)us->iobuf;
 	int result;
 	unsigned int residue;
 	unsigned int cswlen;
@@ -195,7 +231,7 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun,
 
 	/* send it to out endpoint */
 	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
-				bcb, cbwlen, NULL);
+					    bcb, cbwlen, NULL);
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
@@ -204,24 +240,23 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun,
 
 	if (buf && buf_len) {
 		unsigned int pipe = (dir == DMA_FROM_DEVICE) ?
-				us->recv_bulk_pipe : us->send_bulk_pipe;
+		    us->recv_bulk_pipe : us->send_bulk_pipe;
 		result = usb_stor_bulk_transfer_buf(us, pipe,
-				buf, buf_len, NULL);
+						    buf, buf_len, NULL);
 		if (result == USB_STOR_XFER_ERROR)
 			return USB_STOR_TRANSPORT_ERROR;
 	}
 
 	/* get CSW for device status */
 	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
-				bcs, US_BULK_CS_WRAP_LEN, &cswlen);
+					    bcs, US_BULK_CS_WRAP_LEN, &cswlen);
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
 	/* check bulk status */
 	if (bcs->Signature != cpu_to_le32(US_BULK_CS_SIGN)) {
 		US_DEBUGP("Signature mismatch: got %08X, expecting %08X\n",
-			  le32_to_cpu(bcs->Signature),
-			  US_BULK_CS_SIGN);
+			  le32_to_cpu(bcs->Signature), US_BULK_CS_SIGN);
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -249,8 +284,8 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun,
 
 	case US_BULK_STAT_PHASE:
 		/* phase error -- note that a transport reset will be
-			* invoked by the invoke_transport() function
-			*/
+		 * invoked by the invoke_transport() function
+		 */
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -266,10 +301,10 @@ static int rts51x_get_max_lun(struct us_data *us)
 	/* issue the command */
 	us->iobuf[0] = 0;
 	result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
-				 US_BULK_GET_MAX_LUN,
-				 USB_DIR_IN | USB_TYPE_CLASS |
-				 USB_RECIP_INTERFACE,
-				 0, us->ifnum, us->iobuf, 1, 10*HZ);
+				      US_BULK_GET_MAX_LUN,
+				      USB_DIR_IN | USB_TYPE_CLASS |
+				      USB_RECIP_INTERFACE,
+				      0, us->ifnum, us->iobuf, 1, 10 * HZ);
 
 	US_DEBUGP("GetMaxLUN command result is %d, data is %d\n",
 		  result, us->iobuf[0]);
@@ -284,16 +319,16 @@ static int rts51x_get_max_lun(struct us_data *us)
 static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
 {
 	int retval;
-	u8 cmnd[12] = {0};
+	u8 cmnd[12] = { 0 };
 
 	US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len);
 
 	cmnd[0] = 0xF0;
 	cmnd[1] = 0x0D;
-	cmnd[2] = (u8)(addr >> 8);
-	cmnd[3] = (u8)addr;
-	cmnd[4] = (u8)(len >> 8);
-	cmnd[5] = (u8)len;
+	cmnd[2] = (u8) (addr >> 8);
+	cmnd[3] = (u8) addr;
+	cmnd[4] = (u8) (len >> 8);
+	cmnd[5] = (u8) len;
 
 	retval = rts51x_bulk_transport(us, 0, cmnd, 12,
 				       data, len, DMA_FROM_DEVICE, NULL);
@@ -306,16 +341,16 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
 static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len)
 {
 	int retval;
-	u8 cmnd[12] = {0};
+	u8 cmnd[12] = { 0 };
 
 	US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len);
 
 	cmnd[0] = 0xF0;
 	cmnd[1] = 0x0E;
-	cmnd[2] = (u8)(addr >> 8);
-	cmnd[3] = (u8)addr;
-	cmnd[4] = (u8)(len >> 8);
-	cmnd[5] = (u8)len;
+	cmnd[2] = (u8) (addr >> 8);
+	cmnd[3] = (u8) addr;
+	cmnd[4] = (u8) (len >> 8);
+	cmnd[5] = (u8) len;
 
 	retval = rts51x_bulk_transport(us, 0, cmnd, 12,
 				       data, len, DMA_TO_DEVICE, NULL);
@@ -329,7 +364,7 @@ static int rts51x_read_status(struct us_data *us,
 			      u8 lun, u8 *status, int len, int *actlen)
 {
 	int retval;
-	u8 cmnd[12] = {0};
+	u8 cmnd[12] = { 0 };
 
 	US_DEBUGP("%s, lun = %d\n", __func__, lun);
 
@@ -356,12 +391,12 @@ static int rts51x_check_status(struct us_data *us, u8 lun)
 
 	US_DEBUGP("chip->status_len = %d\n", chip->status_len);
 
-	chip->status[lun].vid = ((u16)buf[0] << 8) | buf[1];
-	chip->status[lun].pid = ((u16)buf[2] << 8) | buf[3];
+	chip->status[lun].vid = ((u16) buf[0] << 8) | buf[1];
+	chip->status[lun].pid = ((u16) buf[2] << 8) | buf[3];
 	chip->status[lun].cur_lun = buf[4];
 	chip->status[lun].card_type = buf[5];
 	chip->status[lun].total_lun = buf[6];
-	chip->status[lun].fw_ver = ((u16)buf[7] << 8) | buf[8];
+	chip->status[lun].fw_ver = ((u16) buf[7] << 8) | buf[8];
 	chip->status[lun].phy_exist = buf[9];
 	chip->status[lun].multi_flag = buf[10];
 	chip->status[lun].multi_card = buf[11];
@@ -432,6 +467,8 @@ static int config_autodelink_after_power_on(struct us_data *us)
 	int retval;
 	u8 value;
 
+	US_DEBUGP("%s: <---\n", __func__);
+
 	if (!CHK_AUTO_DELINK(chip))
 		return 0;
 
@@ -465,7 +502,7 @@ static int config_autodelink_after_power_on(struct us_data *us)
 			CLR_BIT(value, 2);
 
 		if (CHECK_ID(chip, 0x0159, 0x5889) ||
-				CHECK_ID(chip, 0x0138, 0x3880)) {
+		    CHECK_ID(chip, 0x0138, 0x3880)) {
 			CLR_BIT(value, 0);
 			CLR_BIT(value, 7);
 		}
@@ -487,6 +524,8 @@ static int config_autodelink_after_power_on(struct us_data *us)
 		}
 	}
 
+	US_DEBUGP("%s: --->\n", __func__);
+
 	return 0;
 }
 
@@ -496,6 +535,8 @@ static int config_autodelink_before_power_down(struct us_data *us)
 	int retval;
 	u8 value;
 
+	US_DEBUGP("%s: <---\n", __func__);
+
 	if (!CHK_AUTO_DELINK(chip))
 		return 0;
 
@@ -528,14 +569,14 @@ static int config_autodelink_before_power_down(struct us_data *us)
 			return -EIO;
 	} else {
 		if (CHECK_ID(chip, 0x0159, 0x5889) ||
-				CHECK_ID(chip, 0x0138, 0x3880) ||
-				CHECK_ID(chip, 0x0138, 0x3882)) {
+		    CHECK_ID(chip, 0x0138, 0x3880) ||
+		    CHECK_ID(chip, 0x0138, 0x3882)) {
 			retval = rts51x_read_mem(us, 0xFE47, &value, 1);
 			if (retval < 0)
 				return -EIO;
 
 			if (CHECK_ID(chip, 0x0159, 0x5889) ||
-					CHECK_ID(chip, 0x0138, 0x3880)) {
+			    CHECK_ID(chip, 0x0138, 0x3880)) {
 				SET_BIT(value, 0);
 				SET_BIT(value, 7);
 			}
@@ -556,25 +597,323 @@ static int config_autodelink_before_power_down(struct us_data *us)
 		}
 	}
 
+	US_DEBUGP("%s: --->\n", __func__);
+
+	return 0;
+}
+
+static void fw5895_init(struct us_data *us)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+	int retval;
+	u8 val;
+
+	US_DEBUGP("%s: <---\n", __func__);
+
+	if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) {
+		US_DEBUGP("Not the specified device, return immediately!\n");
+	} else {
+		retval = rts51x_read_mem(us, 0xFD6F, &val, 1);
+		if (retval == STATUS_SUCCESS && (val & 0x1F) == 0) {
+			val = 0x1F;
+			retval = rts51x_write_mem(us, 0xFD70, &val, 1);
+			if (retval != STATUS_SUCCESS)
+				US_DEBUGP("Write memory fail\n");
+		} else {
+			US_DEBUGP("Read memory fail, OR (val & 0x1F) != 0\n");
+		}
+	}
+
+	US_DEBUGP("%s: --->\n", __func__);
+}
+
+#ifdef CONFIG_REALTEK_AUTOPM
+static void fw5895_set_mmc_wp(struct us_data *us)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+	int retval;
+	u8 buf[13];
+
+	US_DEBUGP("%s: <---\n", __func__);
+
+	if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) {
+		US_DEBUGP("Not the specified device, return immediately!\n");
+	} else {
+		retval = rts51x_read_mem(us, 0xFD6F, buf, 1);
+		if (retval == STATUS_SUCCESS && (buf[0] & 0x24) == 0x24) {
+			/* SD Exist and SD WP */
+			retval = rts51x_read_mem(us, 0xD04E, buf, 1);
+			if (retval == STATUS_SUCCESS) {
+				buf[0] |= 0x04;
+				retval = rts51x_write_mem(us, 0xFD70, buf, 1);
+				if (retval != STATUS_SUCCESS)
+					US_DEBUGP("Write memory fail\n");
+			} else {
+				US_DEBUGP("Read memory fail\n");
+			}
+		} else {
+			US_DEBUGP("Read memory fail, OR (buf[0]&0x24)!=0x24\n");
+		}
+	}
+
+	US_DEBUGP("%s: --->\n", __func__);
+}
+
+static void rts51x_modi_suspend_timer(struct rts51x_chip *chip)
+{
+	US_DEBUGP("%s: <---, state:%d\n", __func__, rts51x_get_stat(chip));
+
+	chip->timer_expires = jiffies + msecs_to_jiffies(1000*ss_delay);
+	mod_timer(&chip->rts51x_suspend_timer, chip->timer_expires);
+
+	US_DEBUGP("%s: --->\n", __func__);
+}
+
+static void rts51x_suspend_timer_fn(unsigned long data)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)data;
+	struct us_data *us = chip->us;
+
+	US_DEBUGP("%s: <---\n", __func__);
+
+	switch (rts51x_get_stat(chip)) {
+	case RTS51X_STAT_INIT:
+	case RTS51X_STAT_RUN:
+		rts51x_modi_suspend_timer(chip);
+		break;
+	case RTS51X_STAT_IDLE:
+	case RTS51X_STAT_SS:
+		US_DEBUGP("%s: RTS51X_STAT_SS, intf->pm_usage_cnt:%d,"
+			"power.usage:%d\n", __func__,
+			atomic_read(&us->pusb_intf->pm_usage_cnt),
+			atomic_read(&us->pusb_intf->dev.power.usage_count));
+
+		if (atomic_read(&us->pusb_intf->pm_usage_cnt) > 0) {
+			US_DEBUGP("%s: Ready to enter SS state.\n",
+				  __func__);
+			rts51x_set_stat(chip, RTS51X_STAT_SS);
+			/* ignore mass storage interface's children */
+			pm_suspend_ignore_children(&us->pusb_intf->dev, true);
+			usb_autopm_put_interface(us->pusb_intf);
+			US_DEBUGP("%s: RTS51X_STAT_SS 01,"
+				"intf->pm_usage_cnt:%d, power.usage:%d\n",
+				__func__,
+				atomic_read(&us->pusb_intf->pm_usage_cnt),
+				atomic_read(
+					&us->pusb_intf->dev.power.usage_count));
+		}
+		break;
+	default:
+		US_DEBUGP("%s: Unknonwn state !!!\n", __func__);
+		break;
+	}
+
+	US_DEBUGP("%s: --->\n", __func__);
+}
+
+static inline int working_scsi(struct scsi_cmnd *srb)
+{
+	if ((srb->cmnd[0] == TEST_UNIT_READY) ||
+	    (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL)) {
+		return 0;
+	}
+
+	return 1;
+}
+
+void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
+	static int card_first_show = 1;
+	static u8 media_not_present[] = { 0x70, 0, 0x02, 0, 0, 0, 0,
+		10, 0, 0, 0, 0, 0x3A, 0, 0, 0, 0, 0
+	};
+	static u8 invalid_cmd_field[] = { 0x70, 0, 0x05, 0, 0, 0, 0,
+		10, 0, 0, 0, 0, 0x24, 0, 0, 0, 0, 0
+	};
+	int ret;
+
+	US_DEBUGP("%s: <---\n", __func__);
+
+	if (working_scsi(srb)) {
+		US_DEBUGP("%s: working scsi, intf->pm_usage_cnt:%d,"
+			"power.usage:%d\n", __func__,
+			atomic_read(&us->pusb_intf->pm_usage_cnt),
+			atomic_read(&us->pusb_intf->dev.power.usage_count));
+
+		if (atomic_read(&us->pusb_intf->pm_usage_cnt) <= 0) {
+			ret = usb_autopm_get_interface(us->pusb_intf);
+			US_DEBUGP("%s: working scsi, ret=%d\n", __func__, ret);
+		}
+		if (rts51x_get_stat(chip) != RTS51X_STAT_RUN)
+			rts51x_set_stat(chip, RTS51X_STAT_RUN);
+		chip->proto_handler_backup(srb, us);
+	} else {
+		if (rts51x_get_stat(chip) == RTS51X_STAT_SS) {
+			US_DEBUGP("%s: NOT working scsi\n", __func__);
+			if ((srb->cmnd[0] == TEST_UNIT_READY) &&
+			    (chip->pwr_state == US_SUSPEND)) {
+				if (TST_LUN_READY(chip, srb->device->lun)) {
+					srb->result = SAM_STAT_GOOD;
+				} else {
+					srb->result = SAM_STAT_CHECK_CONDITION;
+					memcpy(srb->sense_buffer,
+					       media_not_present,
+					       US_SENSE_SIZE);
+				}
+				US_DEBUGP("%s: TEST_UNIT_READY--->\n",
+					  __func__);
+				goto out;
+			}
+			if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+				int prevent = srb->cmnd[4] & 0x1;
+				if (prevent) {
+					srb->result = SAM_STAT_CHECK_CONDITION;
+					memcpy(srb->sense_buffer,
+					       invalid_cmd_field,
+					       US_SENSE_SIZE);
+				} else {
+					srb->result = SAM_STAT_GOOD;
+				}
+				US_DEBUGP("%s: ALLOW_MEDIUM_REMOVAL--->\n",
+					  __func__);
+				goto out;
+			}
+		} else {
+			US_DEBUGP("%s: NOT working scsi, not SS\n", __func__);
+			chip->proto_handler_backup(srb, us);
+			/* Check wether card is plugged in */
+			if (srb->cmnd[0] == TEST_UNIT_READY) {
+				if (srb->result == SAM_STAT_GOOD) {
+					SET_LUN_READY(chip, srb->device->lun);
+					if (card_first_show) {
+						card_first_show = 0;
+						fw5895_set_mmc_wp(us);
+					}
+				} else {
+					CLR_LUN_READY(chip, srb->device->lun);
+					card_first_show = 1;
+				}
+			}
+			if (rts51x_get_stat(chip) != RTS51X_STAT_IDLE)
+				rts51x_set_stat(chip, RTS51X_STAT_IDLE);
+		}
+	}
+out:
+	US_DEBUGP("%s: state:%d\n", __func__, rts51x_get_stat(chip));
+	if (rts51x_get_stat(chip) == RTS51X_STAT_RUN)
+		rts51x_modi_suspend_timer(chip);
+
+	US_DEBUGP("%s: --->\n", __func__);
+}
+
+static int realtek_cr_autosuspend_setup(struct us_data *us)
+{
+	struct rts51x_chip *chip;
+	struct rts51x_status *status = NULL;
+	u8 buf[16];
+	int retval;
+
+	chip = (struct rts51x_chip *)us->extra;
+	chip->support_auto_delink = 0;
+	chip->pwr_state = US_RESUME;
+	chip->lun_ready = 0;
+	rts51x_set_stat(chip, RTS51X_STAT_INIT);
+
+	retval = rts51x_read_status(us, 0, buf, 16, &(chip->status_len));
+	if (retval != STATUS_SUCCESS) {
+		US_DEBUGP("Read status fail\n");
+		return -EIO;
+	}
+	status = chip->status;
+	status->vid = ((u16) buf[0] << 8) | buf[1];
+	status->pid = ((u16) buf[2] << 8) | buf[3];
+	status->cur_lun = buf[4];
+	status->card_type = buf[5];
+	status->total_lun = buf[6];
+	status->fw_ver = ((u16) buf[7] << 8) | buf[8];
+	status->phy_exist = buf[9];
+	status->multi_flag = buf[10];
+	status->multi_card = buf[11];
+	status->log_exist = buf[12];
+	if (chip->status_len == 16) {
+		status->detailed_type.detailed_type1 = buf[13];
+		status->function[0] = buf[14];
+		status->function[1] = buf[15];
+	}
+
+	/* back up the proto_handler in us->extra */
+	chip = (struct rts51x_chip *)(us->extra);
+	chip->proto_handler_backup = us->proto_handler;
+	/* Set the autosuspend_delay to 0 */
+	pm_runtime_set_autosuspend_delay(&us->pusb_dev->dev, 0);
+	/* override us->proto_handler setted in get_protocol() */
+	us->proto_handler = rts51x_invoke_transport;
+
+	chip->timer_expires = 0;
+	setup_timer(&chip->rts51x_suspend_timer, rts51x_suspend_timer_fn,
+			(unsigned long)chip);
+	fw5895_init(us);
+
+	/* enable autosuspend funciton of the usb device */
+	usb_enable_autosuspend(us->pusb_dev);
+
 	return 0;
 }
+#endif
 
 static void realtek_cr_destructor(void *extra)
 {
 	struct rts51x_chip *chip = (struct rts51x_chip *)extra;
 
+	US_DEBUGP("%s: <---\n", __func__);
+
 	if (!chip)
 		return;
-
+#ifdef CONFIG_REALTEK_AUTOPM
+	if (ss_en) {
+		del_timer(&chip->rts51x_suspend_timer);
+		chip->timer_expires = 0;
+	}
+#endif
 	kfree(chip->status);
 }
 
 #ifdef CONFIG_PM
-static void realtek_pm_hook(struct us_data *us, int pm_state)
+int realtek_cr_suspend(struct usb_interface *iface, pm_message_t message)
+{
+	struct us_data *us = usb_get_intfdata(iface);
+
+	US_DEBUGP("%s: <---\n", __func__);
+
+	/* wait until no command is running */
+	mutex_lock(&us->dev_mutex);
+
+	config_autodelink_before_power_down(us);
+
+	mutex_unlock(&us->dev_mutex);
+
+	US_DEBUGP("%s: --->\n", __func__);
+
+	return 0;
+}
+
+static int realtek_cr_resume(struct usb_interface *iface)
 {
-	if (pm_state == US_SUSPEND)
-		(void)config_autodelink_before_power_down(us);
+	struct us_data *us = usb_get_intfdata(iface);
+
+	US_DEBUGP("%s: <---\n", __func__);
+
+	fw5895_init(us);
+	config_autodelink_after_power_on(us);
+
+	US_DEBUGP("%s: --->\n", __func__);
+
+	return 0;
 }
+#else
+#define realtek_cr_suspend	NULL
+#define realtek_cr_resume	NULL
 #endif
 
 static int init_realtek_cr(struct us_data *us)
@@ -588,10 +927,6 @@ static int init_realtek_cr(struct us_data *us)
 
 	us->extra = chip;
 	us->extra_destructor = realtek_cr_destructor;
-#ifdef CONFIG_PM
-	us->suspend_resume_hook = realtek_pm_hook;
-#endif
-
 	us->max_lun = chip->max_lun = rts51x_get_max_lun(us);
 
 	US_DEBUGP("chip->max_lun = %d\n", chip->max_lun);
@@ -602,18 +937,24 @@ static int init_realtek_cr(struct us_data *us)
 		goto INIT_FAIL;
 
 	for (i = 0; i <= (int)(chip->max_lun); i++) {
-		retval = rts51x_check_status(us, (u8)i);
+		retval = rts51x_check_status(us, (u8) i);
 		if (retval < 0)
 			goto INIT_FAIL;
 	}
 
 	if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) ||
-			CHECK_FW_VER(chip, 0x5901))
+	    CHECK_FW_VER(chip, 0x5901))
 		SET_AUTO_DELINK(chip);
 	if (STATUS_LEN(chip) == 16) {
 		if (SUPPORT_AUTO_DELINK(chip))
 			SET_AUTO_DELINK(chip);
 	}
+#ifdef CONFIG_REALTEK_AUTOPM
+	if (ss_en) {
+		chip->us = us;
+		realtek_cr_autosuspend_setup(us);
+	}
+#endif
 
 	US_DEBUGP("chip->flag = 0x%x\n", chip->flag);
 
@@ -632,7 +973,7 @@ INIT_FAIL:
 }
 
 static int realtek_cr_probe(struct usb_interface *intf,
-			 const struct usb_device_id *id)
+			    const struct usb_device_id *id)
 {
 	struct us_data *us;
 	int result;
@@ -640,25 +981,30 @@ static int realtek_cr_probe(struct usb_interface *intf,
 	US_DEBUGP("Probe Realtek Card Reader!\n");
 
 	result = usb_stor_probe1(&us, intf, id,
-			(id - realtek_cr_ids) + realtek_cr_unusual_dev_list);
+				 (id - realtek_cr_ids) +
+				 realtek_cr_unusual_dev_list);
 	if (result)
 		return result;
 
 	result = usb_stor_probe2(us);
+
 	return result;
 }
 
 static struct usb_driver realtek_cr_driver = {
-	.name =		"ums-realtek",
-	.probe =	realtek_cr_probe,
-	.disconnect =	usb_stor_disconnect,
-	.suspend =	usb_stor_suspend,
-	.resume =	usb_stor_resume,
-	.reset_resume =	usb_stor_reset_resume,
-	.pre_reset =	usb_stor_pre_reset,
-	.post_reset =	usb_stor_post_reset,
-	.id_table =	realtek_cr_ids,
-	.soft_unbind =	1,
+	.name = "ums-realtek",
+	.probe = realtek_cr_probe,
+	.disconnect = usb_stor_disconnect,
+	/* .suspend =      usb_stor_suspend, */
+	/* .resume =       usb_stor_resume, */
+	.reset_resume = usb_stor_reset_resume,
+	.suspend = realtek_cr_suspend,
+	.resume = realtek_cr_resume,
+	.pre_reset = usb_stor_pre_reset,
+	.post_reset = usb_stor_post_reset,
+	.id_table = realtek_cr_ids,
+	.soft_unbind = 1,
+	.supports_autosuspend = 1,
 };
 
 static int __init realtek_cr_init(void)
diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c
index c0c5665e60a..200fd7c6c7d 100644
--- a/drivers/usb/wusbcore/cbaf.c
+++ b/drivers/usb/wusbcore/cbaf.c
@@ -298,7 +298,7 @@ static int cbaf_cdid_get(struct cbaf *cbaf)
 	if (result < needed) {
 		dev_err(dev, "Not enough data in DEVICE_INFO reply (%zu vs "
 			"%zu bytes needed)\n", (size_t)result, needed);
-		return result;
+		return -ENOENT;
 	}
 
 	strlcpy(cbaf->device_name, di->DeviceFriendlyName, CBA_NAME_LEN);
@@ -350,7 +350,7 @@ static ssize_t cbaf_wusb_chid_store(struct device *dev,
 		return result;
 	result = cbaf_cdid_get(cbaf);
 	if (result < 0)
-		return -result;
+		return result;
 	return size;
 }
 static DEVICE_ATTR(wusb_chid, 0600, cbaf_wusb_chid_show, cbaf_wusb_chid_store);
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 6ccd93a9b90..419334568be 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -83,6 +83,7 @@
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/hash.h>
+#include <linux/ratelimit.h>
 
 #include "wa-hc.h"
 #include "wusbhc.h"
@@ -1217,16 +1218,14 @@ static int wa_xfer_status_to_errno(u8 status)
 	if (status == 0)
 		return 0;
 	if (status >= ARRAY_SIZE(xlat)) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "%s(): BUG? "
+		printk_ratelimited(KERN_ERR "%s(): BUG? "
 			       "Unknown WA transfer status 0x%02x\n",
 			       __func__, real_status);
 		return -EINVAL;
 	}
 	errno = xlat[status];
 	if (unlikely(errno > 0)) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "%s(): BUG? "
+		printk_ratelimited(KERN_ERR "%s(): BUG? "
 			       "Inconsistent WA status: 0x%02x\n",
 			       __func__, real_status);
 		errno = -errno;
author	Linus Torvalds <torvalds@linux-foundation.org>	2011-07-25 23:08:32 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2011-07-25 23:08:32 -0700
commit	f549953c15deab4c54708b39af86d4edecc6cddc (patch)
tree	f0412f989b77cdceab34c18aa85a8a25d5942a1f /drivers
parent	f0deb97ab13ad1f89cd0993f7339655d59788405 (diff)
parent	e04f5f7e423018bcec84c11af2058cdce87816f3 (diff)