Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (25 commits)
  [POWERPC] Add support for the mpc832x mds board
  [POWERPC] Add initial support for the e300c2 core
  [POWERPC] Add MPC8360EMDS default dts file
  [POWERPC] Add MPC8360EMDS board support
  [POWERPC] Add QUICC Engine (QE) infrastructure
  [POWERPC] Add QE device tree node definition
  [POWERPC] Don't try to just continue if xmon has no input device
  [POWERPC] Fix a printk in pseries_mpic_init_IRQ
  [POWERPC] Get default baud rate in udbg_scc
  [POWERPC] Fix zImage.coff on oldworld PowerMac
  [POWERPC] Fix xmon=off and cleanup xmon initialisation
  [POWERPC] Cleanup include/asm-powerpc/xmon.h
  [POWERPC] Update swim3 printk after blkdev.h change
  [POWERPC] Cell interrupt rework
  POWERPC: mpc82xx merge: board-specific/platform stuff(resend)
  POWERPC: 8272ads merge to powerpc: common stuff
  POWERPC: Added devicetree for mpc8272ads board
  [POWERPC] iSeries has no legacy I/O
  [POWERPC] implement BEGIN/END_FW_FTR_SECTION
  [POWERPC] iSeries does not need pcibios_fixup_resources
  ...

3 files changed, 12 insertions, 4 deletions

diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index f2305ee792a..fdc8f892eb8 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -636,7 +636,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	intr = in_8(&sw->intr);
 	err = (intr & ERROR_INTR)? in_8(&sw->error): 0;
 	if ((intr & ERROR_INTR) && fs->state != do_transfer)
-		printk(KERN_ERR "swim3_interrupt, state=%d, dir=%lx, intr=%x, err=%x\n",
+		printk(KERN_ERR "swim3_interrupt, state=%d, dir=%x, intr=%x, err=%x\n",
 		       fs->state, rq_data_dir(fd_req), intr, err);
 	switch (fs->state) {
 	case locating:
@@ -742,7 +742,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 			if ((stat & ACTIVE) == 0 || resid != 0) {
 				/* musta been an error */
 				printk(KERN_ERR "swim3: fd dma: stat=%x resid=%d\n", stat, resid);
-				printk(KERN_ERR "  state=%d, dir=%lx, intr=%x, err=%x\n",
+				printk(KERN_ERR "  state=%d, dir=%x, intr=%x, err=%x\n",
 				       fs->state, rq_data_dir(fd_req), intr, err);
 				end_request(fd_req, 0);
 				fs->state = idle;
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index 8b6f197e5f8..f144a947bd1 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -29,6 +29,7 @@
 #include <asm/hvconsole.h>
 #include <asm/vio.h>
 #include <asm/prom.h>
+#include <asm/firmware.h>
 #include <asm/iseries/vio.h>
 #include <asm/iseries/hv_call.h>
 #include <asm/iseries/hv_lp_config.h>
@@ -488,6 +489,9 @@ static int hvc_vio_init(void)
 	atomic_t wait_flag;
 	int rc;
 
+	if (!firmware_has_feature(FW_FEATURE_ISERIES))
+		return -EIO;
+
 	/* +2 for fudge */
 	rc = viopath_open(HvLpConfig_getPrimaryLpIndex(),
 			viomajorsubtype_chario, VIOCHAR_WINDOW + 2);
@@ -562,7 +566,7 @@ static int hvc_find_vtys(void)
 
 	for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL;
 			vty = of_find_node_by_name(vty, "vty")) {
-		uint32_t *vtermno;
+		const uint32_t *vtermno;
 
 		/* We have statically defined space for only a certain number
 		 * of console adapters.
@@ -571,7 +575,7 @@ static int hvc_find_vtys(void)
 				(num_found >= VTTY_PORTS))
 			break;
 
-		vtermno = (uint32_t *)get_property(vty, "reg", NULL);
+		vtermno = get_property(vty, "reg", NULL);
 		if (!vtermno)
 			continue;
 
diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c
index cc95941148f..f9c00844d2b 100644
--- a/drivers/char/hvc_vio.c
+++ b/drivers/char/hvc_vio.c
@@ -35,6 +35,7 @@
 #include <asm/hvconsole.h>
 #include <asm/vio.h>
 #include <asm/prom.h>
+#include <asm/firmware.h>
 
 #include "hvc_console.h"
 
@@ -120,6 +121,9 @@ static int hvc_vio_init(void)
 {
 	int rc;
 
+	if (firmware_has_feature(FW_FEATURE_ISERIES))
+		return -EIO;
+
 	/* Register as a vio device to receive callbacks */
 	rc = vio_register_driver(&hvc_vio_driver);