Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits)
  ARM: bcmring: convert to use sp804 clockevents
  ARM: bcmring: convert to sp804 clocksource
  ARM: 6912/1: bcmring: Add clkdev table in init_early
  clockevents: ARM sp804: obtain sp804 timer rate via clks
  clockevents: ARM sp804: allow clockevent name to be specified
  clocksource: ARM sp804: obtain sp804 timer rate via clks
  clocksource: ARM sp804: allow clocksource name to be specified
  clocksource: convert OMAP1 to 32-bit down counting clocksource
  clocksource: convert MXS timrotv2 to 32-bit down counting clocksource
  clocksource: convert SPEAr platforms 16-bit up counting clocksource
  clocksource: convert Integrator/AP 16-bit down counting clocksource
  clocksource: convert W90x900 24-bit down counting clocksource
  clocksource: convert ARM 32-bit down counting clocksources
  clocksource: convert ARM 32-bit up counting clocksources
  clocksource: add common mmio clocksource
  ARM: update sa1100 to reflect PXA updates
  ARM: omap1: convert to using readl/writel instead of volatile struct
  ARM: omap1: delete useless interrupt handler
  ARM: s5p: consolidate selection of timer register
  ARM: 6939/1: fix missing 'cpu_relax()' declaration
  ...

12 files changed, 145 insertions, 393 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 110aeeb52f9..96c92191046 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -1,2 +1,5 @@
 config CLKSRC_I8253
 	bool
+
+config CLKSRC_MMIO
+	bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index cfb6383b543..b995942a506 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_SH_TIMER_CMT)	+= sh_cmt.o
 obj-$(CONFIG_SH_TIMER_MTU2)	+= sh_mtu2.o
 obj-$(CONFIG_SH_TIMER_TMU)	+= sh_tmu.o
 obj-$(CONFIG_CLKSRC_I8253)	+= i8253.o
+obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
diff --git a/drivers/clocksource/mmio.c b/drivers/clocksource/mmio.c
new file mode 100644
index 00000000000..c0e25125a55
--- /dev/null
+++ b/drivers/clocksource/mmio.c
@@ -0,0 +1,73 @@
+/*
+ * Generic MMIO clocksource support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clocksource.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+
+struct clocksource_mmio {
+	void __iomem *reg;
+	struct clocksource clksrc;
+};
+
+static inline struct clocksource_mmio *to_mmio_clksrc(struct clocksource *c)
+{
+	return container_of(c, struct clocksource_mmio, clksrc);
+}
+
+cycle_t clocksource_mmio_readl_up(struct clocksource *c)
+{
+	return readl_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+cycle_t clocksource_mmio_readl_down(struct clocksource *c)
+{
+	return ~readl_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+cycle_t clocksource_mmio_readw_up(struct clocksource *c)
+{
+	return readw_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+cycle_t clocksource_mmio_readw_down(struct clocksource *c)
+{
+	return ~(unsigned)readw_relaxed(to_mmio_clksrc(c)->reg);
+}
+
+/**
+ * clocksource_mmio_init - Initialize a simple mmio based clocksource
+ * @base:	Virtual address of the clock readout register
+ * @name:	Name of the clocksource
+ * @hz:		Frequency of the clocksource in Hz
+ * @rating:	Rating of the clocksource
+ * @bits:	Number of valid bits
+ * @read:	One of clocksource_mmio_read*() above
+ */
+int __init clocksource_mmio_init(void __iomem *base, const char *name,
+	unsigned long hz, int rating, unsigned bits,
+	cycle_t (*read)(struct clocksource *))
+{
+	struct clocksource_mmio *cs;
+
+	if (bits > 32 || bits < 16)
+		return -EINVAL;
+
+	cs = kzalloc(sizeof(struct clocksource_mmio), GFP_KERNEL);
+	if (!cs)
+		return -ENOMEM;
+
+	cs->reg = base;
+	cs->clksrc.name = name;
+	cs->clksrc.rating = rating;
+	cs->clksrc.read = read;
+	cs->clksrc.mask = CLOCKSOURCE_MASK(bits);
+	cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	return clocksource_register_hz(&cs->clksrc, hz);
+}
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index b4a7e4fba90..4941e06fe2e 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -77,7 +77,7 @@ static struct variant_data variant_arm_extended_fifo = {
 static struct variant_data variant_u300 = {
 	.fifosize		= 16 * 4,
 	.fifohalfsize		= 8 * 4,
-	.clkreg_enable		= 1 << 13, /* HWFCEN */
+	.clkreg_enable		= MCI_ST_U300_HWFCEN,
 	.datalength_bits	= 16,
 	.sdio			= true,
 };
@@ -86,7 +86,7 @@ static struct variant_data variant_ux500 = {
 	.fifosize		= 30 * 4,
 	.fifohalfsize		= 8 * 4,
 	.clkreg			= MCI_CLK_ENABLE,
-	.clkreg_enable		= 1 << 14, /* HWFCEN */
+	.clkreg_enable		= MCI_ST_UX500_HWFCEN,
 	.datalength_bits	= 24,
 	.sdio			= true,
 	.st_clkdiv		= true,
@@ -103,6 +103,8 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 	if (desired) {
 		if (desired >= host->mclk) {
 			clk = MCI_CLK_BYPASS;
+			if (variant->st_clkdiv)
+				clk |= MCI_ST_UX500_NEG_EDGE;
 			host->cclk = host->mclk;
 		} else if (variant->st_clkdiv) {
 			/*
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index ec9a7bc6d0d..bb32e21c09d 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -11,23 +11,33 @@
 #define MCI_PWR_OFF		0x00
 #define MCI_PWR_UP		0x02
 #define MCI_PWR_ON		0x03
-#define MCI_DATA2DIREN		(1 << 2)
-#define MCI_CMDDIREN		(1 << 3)
-#define MCI_DATA0DIREN		(1 << 4)
-#define MCI_DATA31DIREN		(1 << 5)
 #define MCI_OD			(1 << 6)
 #define MCI_ROD			(1 << 7)
-/* The ST Micro version does not have ROD */
-#define MCI_FBCLKEN		(1 << 7)
-#define MCI_DATA74DIREN		(1 << 8)
+/*
+ * The ST Micro version does not have ROD and reuse the voltage registers
+ * for direction settings
+ */
+#define MCI_ST_DATA2DIREN	(1 << 2)
+#define MCI_ST_CMDDIREN		(1 << 3)
+#define MCI_ST_DATA0DIREN	(1 << 4)
+#define MCI_ST_DATA31DIREN	(1 << 5)
+#define MCI_ST_FBCLKEN		(1 << 7)
+#define MCI_ST_DATA74DIREN	(1 << 8)
 
 #define MMCICLOCK		0x004
 #define MCI_CLK_ENABLE		(1 << 8)
 #define MCI_CLK_PWRSAVE		(1 << 9)
 #define MCI_CLK_BYPASS		(1 << 10)
 #define MCI_4BIT_BUS		(1 << 11)
-/* 8bit wide buses supported in ST Micro versions */
+/*
+ * 8bit wide buses, hardware flow contronl, negative edges and clock inversion
+ * supported in ST Micro U300 and Ux500 versions
+ */
 #define MCI_ST_8BIT_BUS		(1 << 12)
+#define MCI_ST_U300_HWFCEN	(1 << 13)
+#define MCI_ST_UX500_NEG_EDGE	(1 << 13)
+#define MCI_ST_UX500_HWFCEN	(1 << 14)
+#define MCI_ST_UX500_CLK_INV	(1 << 15)
 
 #define MMCIARGUMENT		0x008
 #define MMCICOMMAND		0x00c
@@ -88,8 +98,9 @@
 #define MCI_RXFIFOEMPTY		(1 << 19)
 #define MCI_TXDATAAVLBL		(1 << 20)
 #define MCI_RXDATAAVLBL		(1 << 21)
-#define MCI_SDIOIT		(1 << 22)
-#define MCI_CEATAEND		(1 << 23)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOIT		(1 << 22)
+#define MCI_ST_CEATAEND		(1 << 23)
 
 #define MMCICLEAR		0x038
 #define MCI_CMDCRCFAILCLR	(1 << 0)
@@ -102,8 +113,9 @@
 #define MCI_CMDSENTCLR		(1 << 7)
 #define MCI_DATAENDCLR		(1 << 8)
 #define MCI_DATABLOCKENDCLR	(1 << 10)
-#define MCI_SDIOITC		(1 << 22)
-#define MCI_CEATAENDC		(1 << 23)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOITC		(1 << 22)
+#define MCI_ST_CEATAENDC	(1 << 23)
 
 #define MMCIMASK0		0x03c
 #define MCI_CMDCRCFAILMASK	(1 << 0)
@@ -127,8 +139,9 @@
 #define MCI_RXFIFOEMPTYMASK	(1 << 19)
 #define MCI_TXDATAAVLBLMASK	(1 << 20)
 #define MCI_RXDATAAVLBLMASK	(1 << 21)
-#define MCI_SDIOITMASK		(1 << 22)
-#define MCI_CEATAENDMASK	(1 << 23)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOITMASK	(1 << 22)
+#define MCI_ST_CEATAENDMASK	(1 << 23)
 
 #define MMCIMASK1		0x040
 #define MMCIFIFOCNT		0x048
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index b4567c35a32..bc50d5ea553 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -148,8 +148,7 @@ config MTD_AFS_PARTS
 
 	  You will still need the parsing functions to be called by the driver
 	  for your particular device. It won't happen automatically. The
-	  'armflash' map driver (CONFIG_MTD_ARM_INTEGRATOR) does this, for
-	  example.
+	  'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
 
 config MTD_OF_PARTS
 	def_bool y
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 6adf4c9b905..cb48b11afff 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -8,7 +8,6 @@ endif
 
 # Chip mappings
 obj-$(CONFIG_MTD_CDB89712)	+= cdb89712.o
-obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
 obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
 obj-$(CONFIG_MTD_DC21285)	+= dc21285.o
 obj-$(CONFIG_MTD_DILNETPC)	+= dilnetpc.o
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
deleted file mode 100644
index e22ff5adbbf..00000000000
--- a/drivers/mtd/maps/integrator-flash.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/*======================================================================
-
-    drivers/mtd/maps/integrator-flash.c: ARM Integrator flash map driver
-
-    Copyright (C) 2000 ARM Limited
-    Copyright (C) 2003 Deep Blue Solutions Ltd.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-   This is access code for flashes using ARM's flash partitioning
-   standards.
-
-======================================================================*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include <asm/mach/flash.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-
-struct armflash_subdev_info {
-	char			*name;
-	struct mtd_info		*mtd;
-	struct map_info		map;
-	struct flash_platform_data *plat;
-};
-
-struct armflash_info {
-	struct resource		*res;
-	struct mtd_partition	*parts;
-	struct mtd_info		*mtd;
-	int			nr_subdev;
-	struct armflash_subdev_info subdev[0];
-};
-
-static void armflash_set_vpp(struct map_info *map, int on)
-{
-	struct armflash_subdev_info *info =
-		container_of(map, struct armflash_subdev_info, map);
-
-	if (info->plat && info->plat->set_vpp)
-		info->plat->set_vpp(on);
-}
-
-static const char *probes[] = { "cmdlinepart", "RedBoot", "afs", NULL };
-
-static int armflash_subdev_probe(struct armflash_subdev_info *subdev,
-				 struct resource *res)
-{
-	struct flash_platform_data *plat = subdev->plat;
-	resource_size_t size = res->end - res->start + 1;
-	void __iomem *base;
-	int err = 0;
-
-	if (!request_mem_region(res->start, size, subdev->name)) {
-		err = -EBUSY;
-		goto out;
-	}
-
-	base = ioremap(res->start, size);
-	if (!base) {
-		err = -ENOMEM;
-		goto no_mem;
-	}
-
-	/*
-	 * look for CFI based flash parts fitted to this board
-	 */
-	subdev->map.size	= size;
-	subdev->map.bankwidth	= plat->width;
-	subdev->map.phys	= res->start;
-	subdev->map.virt	= base;
-	subdev->map.name	= subdev->name;
-	subdev->map.set_vpp	= armflash_set_vpp;
-
-	simple_map_init(&subdev->map);
-
-	/*
-	 * Also, the CFI layer automatically works out what size
-	 * of chips we have, and does the necessary identification
-	 * for us automatically.
-	 */
-	subdev->mtd = do_map_probe(plat->map_name, &subdev->map);
-	if (!subdev->mtd) {
-		err = -ENXIO;
-		goto no_device;
-	}
-
-	subdev->mtd->owner = THIS_MODULE;
-
-	/* Successful? */
-	if (err == 0)
-		return err;
-
-	if (subdev->mtd)
-		map_destroy(subdev->mtd);
- no_device:
-	iounmap(base);
- no_mem:
-	release_mem_region(res->start, size);
- out:
-	return err;
-}
-
-static void armflash_subdev_remove(struct armflash_subdev_info *subdev)
-{
-	if (subdev->mtd)
-		map_destroy(subdev->mtd);
-	if (subdev->map.virt)
-		iounmap(subdev->map.virt);
-	kfree(subdev->name);
-	subdev->name = NULL;
-	release_mem_region(subdev->map.phys, subdev->map.size);
-}
-
-static int armflash_probe(struct platform_device *dev)
-{
-	struct flash_platform_data *plat = dev->dev.platform_data;
-	unsigned int size;
-	struct armflash_info *info;
-	int i, nr, err;
-
-	/* Count the number of devices */
-	for (nr = 0; ; nr++)
-		if (!platform_get_resource(dev, IORESOURCE_MEM, nr))
-			break;
-	if (nr == 0) {
-		err = -ENODEV;
-		goto out;
-	}
-
-	size = sizeof(struct armflash_info) +
-		sizeof(struct armflash_subdev_info) * nr;
-	info = kzalloc(size, GFP_KERNEL);
-	if (!info) {
-		err = -ENOMEM;
-		goto out;
-	}
-
-	if (plat && plat->init) {
-		err = plat->init();
-		if (err)
-			goto no_resource;
-	}
-
-	for (i = 0; i < nr; i++) {
-		struct armflash_subdev_info *subdev = &info->subdev[i];
-		struct resource *res;
-
-		res = platform_get_resource(dev, IORESOURCE_MEM, i);
-		if (!res)
-			break;
-
-		if (nr == 1)
-			/* No MTD concatenation, just use the default name */
-			subdev->name = kstrdup(dev_name(&dev->dev), GFP_KERNEL);
-		else
-			subdev->name = kasprintf(GFP_KERNEL, "%s-%d",
-						 dev_name(&dev->dev), i);
-		if (!subdev->name) {
-			err = -ENOMEM;
-			break;
-		}
-		subdev->plat = plat;
-
-		err = armflash_subdev_probe(subdev, res);
-		if (err) {
-			kfree(subdev->name);
-			subdev->name = NULL;
-			break;
-		}
-	}
-	info->nr_subdev = i;
-
-	if (err)
-		goto subdev_err;
-
-	if (info->nr_subdev == 1)
-		info->mtd = info->subdev[0].mtd;
-	else if (info->nr_subdev > 1) {
-		struct mtd_info *cdev[info->nr_subdev];
-
-		/*
-		 * We detected multiple devices.  Concatenate them together.
-		 */
-		for (i = 0; i < info->nr_subdev; i++)
-			cdev[i] = info->subdev[i].mtd;
-
-		info->mtd = mtd_concat_create(cdev, info->nr_subdev,
-					      dev_name(&dev->dev));
-		if (info->mtd == NULL)
-			err = -ENXIO;
-	}
-
-	if (err < 0)
-		goto cleanup;
-
-	err = parse_mtd_partitions(info->mtd, probes, &info->parts, 0);
-	if (err > 0) {
-		err = add_mtd_partitions(info->mtd, info->parts, err);
-		if (err)
-			printk(KERN_ERR
-			       "mtd partition registration failed: %d\n", err);
-	}
-
-	if (err == 0) {
-		platform_set_drvdata(dev, info);
-		return err;
-	}
-
-	/*
-	 * We got an error, free all resources.
-	 */
- cleanup:
-	if (info->mtd) {
-		del_mtd_partitions(info->mtd);
-		if (info->mtd != info->subdev[0].mtd)
-			mtd_concat_destroy(info->mtd);
-	}
-	kfree(info->parts);
- subdev_err:
-	for (i = info->nr_subdev - 1; i >= 0; i--)
-		armflash_subdev_remove(&info->subdev[i]);
- no_resource:
-	if (plat && plat->exit)
-		plat->exit();
-	kfree(info);
- out:
-	return err;
-}
-
-static int armflash_remove(struct platform_device *dev)
-{
-	struct armflash_info *info = platform_get_drvdata(dev);
-	struct flash_platform_data *plat = dev->dev.platform_data;
-	int i;
-
-	platform_set_drvdata(dev, NULL);
-
-	if (info) {
-		if (info->mtd) {
-			del_mtd_partitions(info->mtd);
-			if (info->mtd != info->subdev[0].mtd)
-				mtd_concat_destroy(info->mtd);
-		}
-		kfree(info->parts);
-
-		for (i = info->nr_subdev - 1; i >= 0; i--)
-			armflash_subdev_remove(&info->subdev[i]);
-
-		if (plat && plat->exit)
-			plat->exit();
-
-		kfree(info);
-	}
-
-	return 0;
-}
-
-static struct platform_driver armflash_driver = {
-	.probe		= armflash_probe,
-	.remove		= armflash_remove,
-	.driver		= {
-		.name	= "armflash",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init armflash_init(void)
-{
-	return platform_driver_register(&armflash_driver);
-}
-
-static void __exit armflash_exit(void)
-{
-	platform_driver_unregister(&armflash_driver);
-}
-
-module_init(armflash_init);
-module_exit(armflash_exit);
-
-MODULE_AUTHOR("ARM Ltd");
-MODULE_DESCRIPTION("ARM Integrator CFI map driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:armflash");
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 7522df4f71f..1a9b94f0ee5 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -67,9 +67,25 @@ static int physmap_flash_remove(struct platform_device *dev)
 		if (info->mtd[i] != NULL)
 			map_destroy(info->mtd[i]);
 	}
+
+	if (physmap_data->exit)
+		physmap_data->exit(dev);
+
 	return 0;
 }
 
+static void physmap_set_vpp(struct map_info *map, int state)
+{
+	struct platform_device *pdev;
+	struct physmap_flash_data *physmap_data;
+
+	pdev = (struct platform_device *)map->map_priv_1;
+	physmap_data = pdev->dev.platform_data;
+
+	if (physmap_data->set_vpp)
+		physmap_data->set_vpp(pdev, state);
+}
+
 static const char *rom_probe_types[] = {
 					"cfi_probe",
 					"jedec_probe",
@@ -77,7 +93,8 @@ static const char *rom_probe_types[] = {
 					"map_rom",
 					NULL };
 #ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "afs",
+					  NULL };
 #endif
 
 static int physmap_flash_probe(struct platform_device *dev)
@@ -100,6 +117,12 @@ static int physmap_flash_probe(struct platform_device *dev)
 		goto err_out;
 	}
 
+	if (physmap_data->init) {
+		err = physmap_data->init(dev);
+		if (err)
+			goto err_out;
+	}
+
 	platform_set_drvdata(dev, info);
 
 	for (i = 0; i < dev->num_resources; i++) {
@@ -120,8 +143,9 @@ static int physmap_flash_probe(struct platform_device *dev)
 		info->map[i].phys = dev->resource[i].start;
 		info->map[i].size = resource_size(&dev->resource[i]);
 		info->map[i].bankwidth = physmap_data->width;
-		info->map[i].set_vpp = physmap_data->set_vpp;
+		info->map[i].set_vpp = physmap_set_vpp;
 		info->map[i].pfow_base = physmap_data->pfow_base;
+		info->map[i].map_priv_1 = (unsigned long)dev;
 
 		info->map[i].virt = devm_ioremap(&dev->dev, info->map[i].phys,
 						 info->map[i].size);
diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c
index f4ce273e93f..65bd1cd4d62 100644
--- a/drivers/mtd/maps/pismo.c
+++ b/drivers/mtd/maps/pismo.c
@@ -50,39 +50,13 @@ struct pismo_data {
 	struct platform_device	*dev[PISMO_NUM_CS];
 };
 
-/* FIXME: set_vpp could do with a better calling convention */
-static struct pismo_data *vpp_pismo;
-static DEFINE_MUTEX(pismo_mutex);
-
-static int pismo_setvpp_probe_fix(struct pismo_data *pismo)
+static void pismo_set_vpp(struct platform_device *pdev, int on)
 {
-	mutex_lock(&pismo_mutex);
-	if (vpp_pismo) {
-		mutex_unlock(&pismo_mutex);
-		kfree(pismo);
-		return -EBUSY;
-	}
-	vpp_pismo = pismo;
-	mutex_unlock(&pismo_mutex);
-	return 0;
-}
-
-static void pismo_setvpp_remove_fix(struct pismo_data *pismo)
-{
-	mutex_lock(&pismo_mutex);
-	if (vpp_pismo == pismo)
-		vpp_pismo = NULL;
-	mutex_unlock(&pismo_mutex);
-}
-
-static void pismo_set_vpp(struct map_info *map, int on)
-{
-	struct pismo_data *pismo = vpp_pismo;
+	struct i2c_client *client = to_i2c_client(pdev->dev.parent);
+	struct pismo_data *pismo = i2c_get_clientdata(client);
 
 	pismo->vpp(pismo->vpp_data, on);
 }
-/* end of hack */
-
 
 static unsigned int __devinit pismo_width_to_bytes(unsigned int width)
 {
@@ -231,9 +205,6 @@ static int __devexit pismo_remove(struct i2c_client *client)
 	for (i = 0; i < ARRAY_SIZE(pismo->dev); i++)
 		platform_device_unregister(pismo->dev[i]);
 
-	/* FIXME: set_vpp needs saner arguments */
-	pismo_setvpp_remove_fix(pismo);
-
 	kfree(pismo);
 
 	return 0;
@@ -257,11 +228,6 @@ static int __devinit pismo_probe(struct i2c_client *client,
 	if (!pismo)
 		return -ENOMEM;
 
-	/* FIXME: set_vpp needs saner arguments */
-	ret = pismo_setvpp_probe_fix(pismo);
-	if (ret)
-		return ret;
-
 	pismo->client = client;
 	if (pdata) {
 		pismo->vpp = pdata->set_vpp;
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6d139679eb7..f9916ca5ca4 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -8,9 +8,6 @@ menu "Graphics support"
 config HAVE_FB_ATMEL
 	bool
 
-config HAVE_FB_IMX
-	bool
-
 config SH_MIPI_DSI
 	tristate
 	depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
@@ -359,7 +356,7 @@ config FB_SA1100
 
 config FB_IMX
 	tristate "Freescale i.MX LCD support"
-	depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
+	depends on FB && IMX_HAVE_PLATFORM_IMX_FB
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index ef72cb48383..d2ccfd6e662 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -65,12 +65,6 @@
 #define CPOS_OP		(1<<28)
 #define CPOS_CXP(x)	(((x) & 3ff) << 16)
 
-#ifdef CONFIG_ARCH_MX1
-#define CPOS_CYP(y)	((y) & 0x1ff)
-#else
-#define CPOS_CYP(y)	((y) & 0x3ff)
-#endif
-
 #define LCDC_LCWHB	0x10
 #define LCWHB_BK_EN	(1<<31)
 #define LCWHB_CW(w)	(((w) & 0x1f) << 24)
@@ -79,16 +73,6 @@
 
 #define LCDC_LCHCC	0x14
 
-#ifdef CONFIG_ARCH_MX1
-#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
-#else
-#define LCHCC_CUR_COL_R(r) (((r) & 0x3f) << 12)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 6)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x3f)
-#endif
-
 #define LCDC_PCR	0x18
 
 #define LCDC_HCR	0x1C
@@ -115,11 +99,7 @@
 
 #define LCDC_RMCR	0x34
 
-#ifdef CONFIG_ARCH_MX1
-#define RMCR_LCDC_EN	(1<<1)
-#else
-#define RMCR_LCDC_EN	0
-#endif
+#define RMCR_LCDC_EN_MX1	(1<<1)
 
 #define RMCR_SELF_REF	(1<<0)
 
@@ -536,7 +516,11 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
 	writel(readl(fbi->regs + LCDC_CPOS) & ~(CPOS_CC0 | CPOS_CC1),
 		fbi->regs + LCDC_CPOS);
 
-	writel(RMCR_LCDC_EN, fbi->regs + LCDC_RMCR);
+	/*
+	 * RMCR_LCDC_EN_MX1 is present on i.MX1 only, but doesn't hurt
+	 * on other SoCs
+	 */
+	writel(RMCR_LCDC_EN_MX1, fbi->regs + LCDC_RMCR);
 
 	clk_enable(fbi->clk);