diff options
| author | Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com> | 2013-03-19 18:05:55 +0530 |
|---|---|---|
| committer | James Bottomley <JBottomley@Parallels.com> | 2013-05-10 07:47:48 -0700 |
| commit | 54792dc2856e27d7c9d798589d45cabe1230990a (patch) | |
| tree | 6f221687936649debf48fba023265ae30ceae2ee /drivers | |
| parent | f5860992db55c9e36b0f120dff73f0c34abe510d (diff) | |
[SCSI] pm80xx: SPC new firmware changes for device id 0x8081 alone
Additional bar shift for new SPC firmware, applicable to device
id 0x8081 only.
Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com>
Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_hwi.c | 31 | ||||
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_hwi.h | 2 |
2 files changed, 30 insertions, 3 deletions
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index c486fe868e3..eea0c3a291e 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -640,6 +640,18 @@ static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha) static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha) { u8 i = 0; + u16 deviceid; + pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid); + /* 8081 controllers need BAR shift to access MPI space + * as this is shared with BIOS data */ + if (deviceid == 0x8081) { + if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("Shift Bar4 to 0x%x failed\n", + GSM_SM_BASE)); + return -1; + } + } /* check the firmware status */ if (-1 == check_fw_ready(pm8001_ha)) { PM8001_FAIL_DBG(pm8001_ha, @@ -660,9 +672,12 @@ static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha) update_inbnd_queue_table(pm8001_ha, i); for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) update_outbnd_queue_table(pm8001_ha, i); - mpi_set_phys_g3_with_ssc(pm8001_ha, 0); - /* 7->130ms, 34->500ms, 119->1.5s */ - mpi_set_open_retry_interval_reg(pm8001_ha, 119); + /* 8081 controller donot require these operations */ + if (deviceid != 0x8081) { + mpi_set_phys_g3_with_ssc(pm8001_ha, 0); + /* 7->130ms, 34->500ms, 119->1.5s */ + mpi_set_open_retry_interval_reg(pm8001_ha, 119); + } /* notify firmware update finished and check initialization status */ if (0 == mpi_init_check(pm8001_ha)) { PM8001_INIT_DBG(pm8001_ha, @@ -684,6 +699,16 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha) u32 max_wait_count; u32 value; u32 gst_len_mpistate; + u16 deviceid; + pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid); + if (deviceid == 0x8081) { + if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("Shift Bar4 to 0x%x failed\n", + GSM_SM_BASE)); + return -1; + } + } init_pci_device_addresses(pm8001_ha); /* Write bit1=1 to Inbound DoorBell Register to tell the SPC FW the table is stop */ diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h index 2399aabbc4e..d7c1e203422 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.h +++ b/drivers/scsi/pm8001/pm8001_hwi.h @@ -131,6 +131,8 @@ #define LINKRATE_30 (0x02 << 8) #define LINKRATE_60 (0x04 << 8) +/* for new SPC controllers MEMBASE III is shared between BIOS and DATA */ +#define GSM_SM_BASE 0x4F0000 struct mpi_msg_hdr{ __le32 header; /* Bits [11:0] - Message operation code */ /* Bits [15:12] - Message Category */ |