Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "I'm hoping this is the very last batch of networking fixes for 3.13,
  here goes nothing:

   1) Fix crashes in VLAN's header_ops passthru.

   2) Bridge multicast code needs to use BH spinlocks to prevent
      deadlocks with timers.  From Curt Brune.

   3) ipv6 tunnels lack proper synchornization when updating percpu
      statistics.  From Li RongQing.

   4) Fixes to bnx2x driver from Yaniv Rosner, Dmitry Kravkov and Michal
      Kalderon.

   5) Avoid undefined operator evaluation order in llc code, from Daniel
      Borkmann.

   6) Error paths in various GSO offload paths do not unwind properly,
      in particular they must undo any modifications they have made to
      the SKB.  From Wei-Chun Chao.

   7) Fix RX refill races during restore in virtio-net, from Jason Wang.

   8) Fix SKB use after free in LLC code, from Daniel Borkmann.

   9) Missing unlock and OOPS in netpoll code when VLAN tag handling
      fails.

  10) Fix vxlan device attachment wrt ipv6, from Fan Du.

  11) Don't allow creating infiniband links to non-infiniband devices,
      from Hangbin Liu.

  12) Revert FEC phy reset active low change, it breaks things.  From
      Fabio Estevam.

  13) Fix header pointer handling in 6lowpan header building code, from
      Daniel Borkmann.

  14) Fix RSS handling in be2net driver, from Vasundhara Volam.

  15) Fix modem port indexing in HSO driver, from Dan Williams"

* http://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
  bridge: use spin_lock_bh() in br_multicast_set_hash_max
  ipv6: don't install anycast address for /128 addresses on routers
  hso: fix handling of modem port SERIAL_STATE notifications
  isdn: Drop big endian cpp checks from telespci and hfc_pci drivers
  be2net: fix max_evt_qs calculation for BE3 in SR-IOV config
  be2net: increase the timeout value for loopback-test FW cmd
  be2net: disable RSS when number of RXQs is reduced to 1 via set-channels
  xen-netback: Include header for vmalloc
  net: 6lowpan: fix lowpan_header_create non-compression memcpy call
  fec: Revert "fec: Do not assume that PHY reset is active low"
  bnx2x: fix VLAN configuration for VFs.
  bnx2x: fix AFEX memory overflow
  bnx2x: Clean before update RSS arrives
  bnx2x: Correct number of MSI-X vectors for VFs
  bnx2x: limit number of interrupt vectors for 57711
  qlcnic: Fix bug in Tx completion path
  infiniband: make sure the src net is infiniband when create new link
  {vxlan, inet6} Mark vxlan_dev flags with VXLAN_F_IPV6 properly
  cxgb4: allow large buffer size to have page size
  netpoll: Fix missing TXQ unlock and and OOPS.
  ...

28 files changed, 350 insertions, 235 deletions

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_netlink.c b/drivers/infiniband/ulp/ipoib/ipoib_netlink.c
index c29b5c83883..cdc7df4fdb8 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_netlink.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_netlink.c
@@ -31,6 +31,7 @@
  */
 
 #include <linux/netdevice.h>
+#include <linux/if_arp.h>      /* For ARPHRD_xxx */
 #include <linux/module.h>
 #include <net/rtnetlink.h>
 #include "ipoib.h"
@@ -103,7 +104,7 @@ static int ipoib_new_child_link(struct net *src_net, struct net_device *dev,
 		return -EINVAL;
 
 	pdev = __dev_get_by_index(src_net, nla_get_u32(tb[IFLA_LINK]));
-	if (!pdev)
+	if (!pdev || pdev->type != ARPHRD_INFINIBAND)
 		return -ENODEV;
 
 	ppriv = netdev_priv(pdev);
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 497bd026c23..4a482552818 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -1643,10 +1643,6 @@ setup_hfcpci(struct IsdnCard *card)
 	int i;
 	struct pci_dev *tmp_hfcpci = NULL;
 
-#ifdef __BIG_ENDIAN
-#error "not running on big endian machines now"
-#endif
-
 	strcpy(tmp, hfcpci_revision);
 	printk(KERN_INFO "HiSax: HFC-PCI driver Rev. %s\n", HiSax_getrev(tmp));
 
diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c
index f6ab63aa699..33eeb4602c7 100644
--- a/drivers/isdn/hisax/telespci.c
+++ b/drivers/isdn/hisax/telespci.c
@@ -290,10 +290,6 @@ int setup_telespci(struct IsdnCard *card)
 	struct IsdnCardState *cs = card->cs;
 	char tmp[64];
 
-#ifdef __BIG_ENDIAN
-#error "not running on big endian machines now"
-#endif
-
 	strcpy(tmp, telespci_revision);
 	printk(KERN_INFO "HiSax: Teles/PCI driver Rev. %s\n", HiSax_getrev(tmp));
 	if (cs->typ != ISDN_CTYPE_TELESPCI)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index a1f66e2c9a8..2d5fce4c975 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1250,7 +1250,10 @@ struct bnx2x_slowpath {
 	 * Therefore, if they would have been defined in the same union,
 	 * data can get corrupted.
 	 */
-	struct afex_vif_list_ramrod_data func_afex_rdata;
+	union {
+		struct afex_vif_list_ramrod_data	viflist_data;
+		struct function_update_data		func_update;
+	} func_afex_rdata;
 
 	/* used by dmae command executer */
 	struct dmae_command		dmae[MAX_DMAE_C];
@@ -2499,4 +2502,6 @@ void bnx2x_set_local_cmng(struct bnx2x *bp);
 #define MCPR_SCRATCH_BASE(bp) \
 	(CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
 
+#define E1H_MAX_MF_SB_COUNT (HC_SB_MAX_SB_E1X/(E1HVN_MAX * PORT_MAX))
+
 #endif /* bnx2x.h */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 20dcc02431c..11fc7958549 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -3865,6 +3865,19 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
 
 		bnx2x_warpcore_enable_AN_KR2(phy, params, vars);
 	} else {
+		/* Enable Auto-Detect to support 1G over CL37 as well */
+		bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+				 MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0x10);
+
+		/* Force cl48 sync_status LOW to avoid getting stuck in CL73
+		 * parallel-detect loop when CL73 and CL37 are enabled.
+		 */
+		CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+				  MDIO_AER_BLOCK_AER_REG, 0);
+		bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+				 MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI, 0x0800);
+		bnx2x_set_aer_mmd(params, phy);
+
 		bnx2x_disable_kr2(params, vars, phy);
 	}
 
@@ -8120,17 +8133,20 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy,
 				*edc_mode = EDC_MODE_ACTIVE_DAC;
 			else
 				check_limiting_mode = 1;
-		} else if (copper_module_type &
-			SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) {
+		} else {
+			*edc_mode = EDC_MODE_PASSIVE_DAC;
+			/* Even in case PASSIVE_DAC indication is not set,
+			 * treat it as a passive DAC cable, since some cables
+			 * don't have this indication.
+			 */
+			if (copper_module_type &
+			    SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) {
 				DP(NETIF_MSG_LINK,
 				   "Passive Copper cable detected\n");
-				*edc_mode =
-				      EDC_MODE_PASSIVE_DAC;
-		} else {
-			DP(NETIF_MSG_LINK,
-			   "Unknown copper-cable-type 0x%x !!!\n",
-			   copper_module_type);
-			return -EINVAL;
+			} else {
+				DP(NETIF_MSG_LINK,
+				   "Unknown copper-cable-type\n");
+			}
 		}
 		break;
 	}
@@ -10825,9 +10841,9 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy,
 			   (1<<11));
 
 	if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
-			(phy->speed_cap_mask &
-			PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
-			(phy->req_line_speed == SPEED_1000)) {
+	     (phy->speed_cap_mask &
+	      PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
+	    (phy->req_line_speed == SPEED_1000)) {
 		an_1000_val |= (1<<8);
 		autoneg_val |= (1<<9 | 1<<12);
 		if (phy->req_duplex == DUPLEX_FULL)
@@ -10843,30 +10859,32 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy,
 			0x09,
 			&an_1000_val);
 
-	/* Set 100 speed advertisement */
-	if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
-			(phy->speed_cap_mask &
-			(PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL |
-			PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)))) {
-		an_10_100_val |= (1<<7);
-		/* Enable autoneg and restart autoneg for legacy speeds */
-		autoneg_val |= (1<<9 | 1<<12);
-
-		if (phy->req_duplex == DUPLEX_FULL)
-			an_10_100_val |= (1<<8);
-		DP(NETIF_MSG_LINK, "Advertising 100M\n");
-	}
-
-	/* Set 10 speed advertisement */
-	if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
-			(phy->speed_cap_mask &
-			(PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL |
-			PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)))) {
-		an_10_100_val |= (1<<5);
-		autoneg_val |= (1<<9 | 1<<12);
-		if (phy->req_duplex == DUPLEX_FULL)
+	/* Advertise 10/100 link speed */
+	if (phy->req_line_speed == SPEED_AUTO_NEG) {
+		if (phy->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
+			an_10_100_val |= (1<<5);
+			autoneg_val |= (1<<9 | 1<<12);
+			DP(NETIF_MSG_LINK, "Advertising 10M-HD\n");
+		}
+		if (phy->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) {
 			an_10_100_val |= (1<<6);
-		DP(NETIF_MSG_LINK, "Advertising 10M\n");
+			autoneg_val |= (1<<9 | 1<<12);
+			DP(NETIF_MSG_LINK, "Advertising 10M-FD\n");
+		}
+		if (phy->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) {
+			an_10_100_val |= (1<<7);
+			autoneg_val |= (1<<9 | 1<<12);
+			DP(NETIF_MSG_LINK, "Advertising 100M-HD\n");
+		}
+		if (phy->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) {
+			an_10_100_val |= (1<<8);
+			autoneg_val |= (1<<9 | 1<<12);
+			DP(NETIF_MSG_LINK, "Advertising 100M-FD\n");
+		}
 	}
 
 	/* Only 10/100 are allowed to work in FORCE mode */
@@ -13342,6 +13360,10 @@ static u8 bnx2x_analyze_link_error(struct link_params *params,
 	DP(NETIF_MSG_LINK, "Link changed:[%x %x]->%x\n", vars->link_up,
 	   old_status, status);
 
+	/* Do not touch the link in case physical link down */
+	if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0)
+		return 1;
+
 	/* a. Update shmem->link_status accordingly
 	 * b. Update link_vars->link_up
 	 */
@@ -13550,7 +13572,7 @@ static void bnx2x_check_kr2_wa(struct link_params *params,
 	 */
 	not_kr2_device = (((base_page & 0x8000) == 0) ||
 			  (((base_page & 0x8000) &&
-			    ((next_page & 0xe0) == 0x2))));
+			    ((next_page & 0xe0) == 0x20))));
 
 	/* In case KR2 is already disabled, check if we need to re-enable it */
 	if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 814d0eca9b3..8b3107b2fcc 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -11447,9 +11447,9 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
 		}
 	}
 
-	/* adjust igu_sb_cnt to MF for E1x */
-	if (CHIP_IS_E1x(bp) && IS_MF(bp))
-		bp->igu_sb_cnt /= E1HVN_MAX;
+	/* adjust igu_sb_cnt to MF for E1H */
+	if (CHIP_IS_E1H(bp) && IS_MF(bp))
+		bp->igu_sb_cnt = min_t(u8, bp->igu_sb_cnt, E1H_MAX_MF_SB_COUNT);
 
 	/* port info */
 	bnx2x_get_port_hwinfo(bp);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index 3efbb35267c..14ffb6e56e5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -7179,6 +7179,7 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_WC_REG_RX1_PCI_CTRL			0x80ca
 #define MDIO_WC_REG_RX2_PCI_CTRL			0x80da
 #define MDIO_WC_REG_RX3_PCI_CTRL			0x80ea
+#define MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI		0x80fa
 #define MDIO_WC_REG_XGXSBLK2_UNICORE_MODE_10G		0x8104
 #define MDIO_WC_REG_XGXS_STATUS3			0x8129
 #define MDIO_WC_REG_PAR_DET_10G_STATUS			0x8130
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index 32c92abf509..18438a504d5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -2038,6 +2038,7 @@ static int bnx2x_vlan_mac_del_all(struct bnx2x *bp,
 	struct bnx2x_vlan_mac_ramrod_params p;
 	struct bnx2x_exe_queue_obj *exeq = &o->exe_queue;
 	struct bnx2x_exeq_elem *exeq_pos, *exeq_pos_n;
+	unsigned long flags;
 	int read_lock;
 	int rc = 0;
 
@@ -2046,8 +2047,9 @@ static int bnx2x_vlan_mac_del_all(struct bnx2x *bp,
 	spin_lock_bh(&exeq->lock);
 
 	list_for_each_entry_safe(exeq_pos, exeq_pos_n, &exeq->exe_queue, link) {
-		if (exeq_pos->cmd_data.vlan_mac.vlan_mac_flags ==
-		    *vlan_mac_flags) {
+		flags = exeq_pos->cmd_data.vlan_mac.vlan_mac_flags;
+		if (BNX2X_VLAN_MAC_CMP_FLAGS(flags) ==
+		    BNX2X_VLAN_MAC_CMP_FLAGS(*vlan_mac_flags)) {
 			rc = exeq->remove(bp, exeq->owner, exeq_pos);
 			if (rc) {
 				BNX2X_ERR("Failed to remove command\n");
@@ -2080,7 +2082,9 @@ static int bnx2x_vlan_mac_del_all(struct bnx2x *bp,
 		return read_lock;
 
 	list_for_each_entry(pos, &o->head, link) {
-		if (pos->vlan_mac_flags == *vlan_mac_flags) {
+		flags = pos->vlan_mac_flags;
+		if (BNX2X_VLAN_MAC_CMP_FLAGS(flags) ==
+		    BNX2X_VLAN_MAC_CMP_FLAGS(*vlan_mac_flags)) {
 			p.user_req.vlan_mac_flags = pos->vlan_mac_flags;
 			memcpy(&p.user_req.u, &pos->u, sizeof(pos->u));
 			rc = bnx2x_config_vlan_mac(bp, &p);
@@ -4382,8 +4386,11 @@ int bnx2x_config_rss(struct bnx2x *bp,
 	struct bnx2x_raw_obj *r = &o->raw;
 
 	/* Do nothing if only driver cleanup was requested */
-	if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags))
+	if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags)) {
+		DP(BNX2X_MSG_SP, "Not configuring RSS ramrod_flags=%lx\n",
+		   p->ramrod_flags);
 		return 0;
+	}
 
 	r->set_pending(r);
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
index 658f4e33abf..6a53c15c85a 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
@@ -266,6 +266,13 @@ enum {
 	BNX2X_DONT_CONSUME_CAM_CREDIT,
 	BNX2X_DONT_CONSUME_CAM_CREDIT_DEST,
 };
+/* When looking for matching filters, some flags are not interesting */
+#define BNX2X_VLAN_MAC_CMP_MASK	(1 << BNX2X_UC_LIST_MAC | \
+				 1 << BNX2X_ETH_MAC | \
+				 1 << BNX2X_ISCSI_ETH_MAC | \
+				 1 << BNX2X_NETQ_ETH_MAC)
+#define BNX2X_VLAN_MAC_CMP_FLAGS(flags) \
+	((flags) & BNX2X_VLAN_MAC_CMP_MASK)
 
 struct bnx2x_vlan_mac_ramrod_params {
 	/* Object to run the command from */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 2e46c28fc60..e7845e5be1c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -1209,6 +1209,11 @@ static void bnx2x_vfop_rxmode(struct bnx2x *bp, struct bnx2x_virtf *vf)
 		/* next state */
 		vfop->state = BNX2X_VFOP_RXMODE_DONE;
 
+		/* record the accept flags in vfdb so hypervisor can modify them
+		 * if necessary
+		 */
+		bnx2x_vfq(vf, ramrod->cl_id - vf->igu_base_id, accept_flags) =
+			ramrod->rx_accept_flags;
 		vfop->rc = bnx2x_config_rx_mode(bp, ramrod);
 		bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE);
 op_err:
@@ -1224,39 +1229,43 @@ op_pending:
 	return;
 }
 
+static void bnx2x_vf_prep_rx_mode(struct bnx2x *bp, u8 qid,
+				  struct bnx2x_rx_mode_ramrod_params *ramrod,
+				  struct bnx2x_virtf *vf,
+				  unsigned long accept_flags)
+{
+	struct bnx2x_vf_queue *vfq = vfq_get(vf, qid);
+
+	memset(ramrod, 0, sizeof(*ramrod));
+	ramrod->cid = vfq->cid;
+	ramrod->cl_id = vfq_cl_id(vf, vfq);
+	ramrod->rx_mode_obj = &bp->rx_mode_obj;
+	ramrod->func_id = FW_VF_HANDLE(vf->abs_vfid);
+	ramrod->rx_accept_flags = accept_flags;
+	ramrod->tx_accept_flags = accept_flags;
+	ramrod->pstate = &vf->filter_state;
+	ramrod->state = BNX2X_FILTER_RX_MODE_PENDING;
+
+	set_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state);
+	set_bit(RAMROD_RX, &ramrod->ramrod_flags);
+	set_bit(RAMROD_TX, &ramrod->ramrod_flags);
+
+	ramrod->rdata = bnx2x_vf_sp(bp, vf, rx_mode_rdata.e2);
+	ramrod->rdata_mapping = bnx2x_vf_sp_map(bp, vf, rx_mode_rdata.e2);
+}
+
 int bnx2x_vfop_rxmode_cmd(struct bnx2x *bp,
 			  struct bnx2x_virtf *vf,
 			  struct bnx2x_vfop_cmd *cmd,
 			  int qid, unsigned long accept_flags)
 {
-	struct bnx2x_vf_queue *vfq = vfq_get(vf, qid);
 	struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
 
 	if (vfop) {
 		struct bnx2x_rx_mode_ramrod_params *ramrod =
 			&vf->op_params.rx_mode;
 
-		memset(ramrod, 0, sizeof(*ramrod));
-
-		/* Prepare ramrod parameters */
-		ramrod->cid = vfq->cid;
-		ramrod->cl_id = vfq_cl_id(vf, vfq);
-		ramrod->rx_mode_obj = &bp->rx_mode_obj;
-		ramrod->func_id = FW_VF_HANDLE(vf->abs_vfid);
-
-		ramrod->rx_accept_flags = accept_flags;
-		ramrod->tx_accept_flags = accept_flags;
-		ramrod->pstate = &vf->filter_state;
-		ramrod->state = BNX2X_FILTER_RX_MODE_PENDING;
-
-		set_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state);
-		set_bit(RAMROD_RX, &ramrod->ramrod_flags);
-		set_bit(RAMROD_TX, &ramrod->ramrod_flags);
-
-		ramrod->rdata =
-			bnx2x_vf_sp(bp, vf, rx_mode_rdata.e2);
-		ramrod->rdata_mapping =
-			bnx2x_vf_sp_map(bp, vf, rx_mode_rdata.e2);
+		bnx2x_vf_prep_rx_mode(bp, qid, ramrod, vf, accept_flags);
 
 		bnx2x_vfop_opset(BNX2X_VFOP_RXMODE_CONFIG,
 				 bnx2x_vfop_rxmode, cmd->done);
@@ -3202,13 +3211,16 @@ int bnx2x_enable_sriov(struct bnx2x *bp)
 		bnx2x_iov_static_resc(bp, vf);
 	}
 
-	/* prepare msix vectors in VF configuration space */
+	/* prepare msix vectors in VF configuration space - the value in the
+	 * PCI configuration space should be the index of the last entry,
+	 * namely one less than the actual size of the table
+	 */
 	for (vf_idx = first_vf; vf_idx < first_vf + req_vfs; vf_idx++) {
 		bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf_idx));
 		REG_WR(bp, PCICFG_OFFSET + GRC_CONFIG_REG_VF_MSIX_CONTROL,
-		       num_vf_queues);
+		       num_vf_queues - 1);
 		DP(BNX2X_MSG_IOV, "set msix vec num in VF %d cfg space to %d\n",
-		   vf_idx, num_vf_queues);
+		   vf_idx, num_vf_queues - 1);
 	}
 	bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
 
@@ -3436,10 +3448,18 @@ out:
 
 int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
 {
+	struct bnx2x_queue_state_params q_params = {NULL};
+	struct bnx2x_vlan_mac_ramrod_params ramrod_param;
+	struct bnx2x_queue_update_params *update_params;
+	struct pf_vf_bulletin_content *bulletin = NULL;
+	struct bnx2x_rx_mode_ramrod_params rx_ramrod;
 	struct bnx2x *bp = netdev_priv(dev);
-	int rc, q_logical_state;
+	struct bnx2x_vlan_mac_obj *vlan_obj;
+	unsigned long vlan_mac_flags = 0;
+	unsigned long ramrod_flags = 0;
 	struct bnx2x_virtf *vf = NULL;
-	struct pf_vf_bulletin_content *bulletin = NULL;
+	unsigned long accept_flags;
+	int rc;
 
 	/* sanity and init */
 	rc = bnx2x_vf_ndo_prep(bp, vfidx, &vf, &bulletin);
@@ -3457,104 +3477,118 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
 	/* update PF's copy of the VF's bulletin. No point in posting the vlan
 	 * to the VF since it doesn't have anything to do with it. But it useful
 	 * to store it here in case the VF is not up yet and we can only
-	 * configure the vlan later when it does.
+	 * configure the vlan later when it does. Treat vlan id 0 as remove the
+	 * Host tag.
 	 */
-	bulletin->valid_bitmap |= 1 << VLAN_VALID;
+	if (vlan > 0)
+		bulletin->valid_bitmap |= 1 << VLAN_VALID;
+	else
+		bulletin->valid_bitmap &= ~(1 << VLAN_VALID);
 	bulletin->vlan = vlan;
 
 	/* is vf initialized and queue set up? */
-	q_logical_state =
-		bnx2x_get_q_logical_state(bp, &bnx2x_leading_vfq(vf, sp_obj));
-	if (vf->state == VF_ENABLED &&
-	    q_logical_state == BNX2X_Q_LOGICAL_STATE_ACTIVE) {
-		/* configure the vlan in device on this vf's queue */
-		unsigned long ramrod_flags = 0;
-		unsigned long vlan_mac_flags = 0;
-		struct bnx2x_vlan_mac_obj *vlan_obj =
-			&bnx2x_leading_vfq(vf, vlan_obj);
-		struct bnx2x_vlan_mac_ramrod_params ramrod_param;
-		struct bnx2x_queue_state_params q_params = {NULL};
-		struct bnx2x_queue_update_params *update_params;
+	if (vf->state != VF_ENABLED ||
+	    bnx2x_get_q_logical_state(bp, &bnx2x_leading_vfq(vf, sp_obj)) !=
+	    BNX2X_Q_LOGICAL_STATE_ACTIVE)
+		return rc;
 
-		rc = validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, mac_obj));
-		if (rc)
-			return rc;
-		memset(&ramrod_param, 0, sizeof(ramrod_param));
+	/* configure the vlan in device on this vf's queue */
+	vlan_obj = &bnx2x_leading_vfq(vf, vlan_obj);
+	rc = validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, mac_obj));
+	if (rc)
+		return rc;
 
-		/* must lock vfpf channel to protect against vf flows */
-		bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
+	/* must lock vfpf channel to protect against vf flows */
+	bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
 
-		/* remove existing vlans */
-		__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
-		rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_mac_flags,
-					  &ramrod_flags);
-		if (rc) {
-			BNX2X_ERR("failed to delete vlans\n");
-			rc = -EINVAL;
-			goto out;
-		}
+	/* remove existing vlans */
+	__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+	rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_mac_flags,
+				  &ramrod_flags);
+	if (rc) {
+		BNX2X_ERR("failed to delete vlans\n");
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* need to remove/add the VF's accept_any_vlan bit */
+	accept_flags = bnx2x_leading_vfq(vf, accept_flags);
+	if (vlan)
+		clear_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags);
+	else
+		set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags);
+
+	bnx2x_vf_prep_rx_mode(bp, LEADING_IDX, &rx_ramrod, vf,
+			      accept_flags);
+	bnx2x_leading_vfq(vf, accept_flags) = accept_flags;
+	bnx2x_config_rx_mode(bp, &rx_ramrod);
+
+	/* configure the new vlan to device */
+	memset(&ramrod_param, 0, sizeof(ramrod_param));
+	__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+	ramrod_param.vlan_mac_obj = vlan_obj;
+	ramrod_param.ramrod_flags = ramrod_flags;
+	set_bit(BNX2X_DONT_CONSUME_CAM_CREDIT,
+		&ramrod_param.user_req.vlan_mac_flags);
+	ramrod_param.user_req.u.vlan.vlan = vlan;
+	ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
+	rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
+	if (rc) {
+		BNX2X_ERR("failed to configure vlan\n");
+		rc =  -EINVAL;
+		goto out;
+	}
 
-		/* send queue update ramrod to configure default vlan and silent
-		 * vlan removal
+	/* send queue update ramrod to configure default vlan and silent
+	 * vlan removal
+	 */
+	__set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
+	q_params.cmd = BNX2X_Q_CMD_UPDATE;
+	q_params.q_obj = &bnx2x_leading_vfq(vf, sp_obj);
+	update_params = &q_params.params.update;
+	__set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG,
+		  &update_params->update_flags);
+	__set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
+		  &update_params->update_flags);
+	if (vlan == 0) {
+		/* if vlan is 0 then we want to leave the VF traffic
+		 * untagged, and leave the incoming traffic untouched
+		 * (i.e. do not remove any vlan tags).
 		 */
-		__set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
-		q_params.cmd = BNX2X_Q_CMD_UPDATE;
-		q_params.q_obj = &bnx2x_leading_vfq(vf, sp_obj);
-		update_params = &q_params.params.update;
-		__set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG,
+		__clear_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
+			    &update_params->update_flags);
+		__clear_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
+			    &update_params->update_flags);
+	} else {
+		/* configure default vlan to vf queue and set silent
+		 * vlan removal (the vf remains unaware of this vlan).
+		 */
+		__set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
 			  &update_params->update_flags);
-		__set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
+		__set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
 			  &update_params->update_flags);
+		update_params->def_vlan = vlan;
+		update_params->silent_removal_value =
+			vlan & VLAN_VID_MASK;
+		update_params->silent_removal_mask = VLAN_VID_MASK;
+	}
 
-		if (vlan == 0) {
-			/* if vlan is 0 then we want to leave the VF traffic
-			 * untagged, and leave the incoming traffic untouched
-			 * (i.e. do not remove any vlan tags).
-			 */
-			__clear_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
-				    &update_params->update_flags);
-			__clear_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
-				    &update_params->update_flags);
-		} else {
-			/* configure the new vlan to device */
-			__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
-			ramrod_param.vlan_mac_obj = vlan_obj;
-			ramrod_param.ramrod_flags = ramrod_flags;
-			ramrod_param.user_req.u.vlan.vlan = vlan;
-			ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
-			rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
-			if (rc) {
-				BNX2X_ERR("failed to configure vlan\n");
-				rc =  -EINVAL;
-				goto out;
-			}
-
-			/* configure default vlan to vf queue and set silent
-			 * vlan removal (the vf remains unaware of this vlan).
-			 */
-			update_params = &q_params.params.update;
-			__set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
-				  &update_params->update_flags);
-			__set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
-				  &update_params->update_flags);
-			update_params->def_vlan = vlan;
-		}
+	/* Update the Queue state */
+	rc = bnx2x_queue_state_change(bp, &q_params);
+	if (rc) {
+		BNX2X_ERR("Failed to configure default VLAN\n");
+		goto out;
+	}
 
-		/* Update the Queue state */
-		rc = bnx2x_queue_state_change(bp, &q_params);
-		if (rc) {
-			BNX2X_ERR("Failed to configure default VLAN\n");
-			goto out;
-		}
 
-		/* clear the flag indicating that this VF needs its vlan
-		 * (will only be set if the HV configured the Vlan before vf was
-		 * up and we were called because the VF came up later
-		 */
+	/* clear the flag indicating that this VF needs its vlan
+	 * (will only be set if the HV configured the Vlan before vf was
+	 * up and we were called because the VF came up later
+	 */
 out:
-		vf->cfg_flags &= ~VF_CFG_VLAN;
-		bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
-	}
+	vf->cfg_flags &= ~VF_CFG_VLAN;
+	bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
+
 	return rc;
 }
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
index 1ff6a936662..8c213fa5217 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -74,6 +74,7 @@ struct bnx2x_vf_queue {
 	/* VLANs object */
 	struct bnx2x_vlan_mac_obj	vlan_obj;
 	atomic_t vlan_count;		/* 0 means vlan-0 is set  ~ untagged */
+	unsigned long accept_flags;	/* last accept flags configured */
 
 	/* Queue Slow-path State object */
 	struct bnx2x_queue_sp_obj	sp_obj;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index 3dc2537fe91..0756d7dabdd 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -1598,6 +1598,8 @@ static void bnx2x_vfop_mbx_qfilters(struct bnx2x *bp, struct bnx2x_virtf *vf)
 
 		if (msg->flags & VFPF_SET_Q_FILTERS_RX_MASK_CHANGED) {
 			unsigned long accept = 0;
+			struct pf_vf_bulletin_content *bulletin =
+				BP_VF_BULLETIN(bp, vf->index);
 
 			/* covert VF-PF if mask to bnx2x accept flags */
 			if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST)
@@ -1617,9 +1619,11 @@ static void bnx2x_vfop_mbx_qfilters(struct bnx2x *bp, struct bnx2x_virtf *vf)
 				__set_bit(BNX2X_ACCEPT_BROADCAST, &accept);
 
 			/* A packet arriving the vf's mac should be accepted
-			 * with any vlan
+			 * with any vlan, unless a vlan has already been
+			 * configured.
 			 */
-			__set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept);
+			if (!(bulletin->valid_bitmap & (1 << VLAN_VALID)))
+				__set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept);
 
 			/* set rx-mode */
 			rc = bnx2x_vfop_rxmode_cmd(bp, vf, &cmd,
@@ -1710,6 +1714,21 @@ static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp,
 			goto response;
 		}
 	}
+	/* if vlan was set by hypervisor we don't allow guest to config vlan */
+	if (bulletin->valid_bitmap & 1 << VLAN_VALID) {
+		int i;
+
+		/* search for vlan filters */
+		for (i = 0; i < filters->n_mac_vlan_filters; i++) {
+			if (filters->filters[i].flags &
+			    VFPF_Q_FILTER_VLAN_TAG_VALID) {
+				BNX2X_ERR("VF[%d] attempted to configure vlan but one was already set by Hypervisor. Aborting request\n",
+					  vf->abs_vfid);
+				vf->op_rc = -EPERM;
+				goto response;
+			}
+		}
+	}
 
 	/* verify vf_qid */
 	if (filters->vf_qid > vf_rxq_count(vf))
@@ -1805,6 +1824,9 @@ static void bnx2x_vf_mbx_update_rss(struct bnx2x *bp, struct bnx2x_virtf *vf,
 	vf_op_params->rss_result_mask = rss_tlv->rss_result_mask;
 
 	/* flags handled individually for backward/forward compatability */
+	vf_op_params->rss_flags = 0;
+	vf_op_params->ramrod_flags = 0;
+
 	if (rss_tlv->rss_flags & VFPF_RSS_MODE_DISABLED)
 		__set_bit(BNX2X_RSS_MODE_DISABLED, &vf_op_params->rss_flags);
 	if (rss_tlv->rss_flags & VFPF_RSS_MODE_REGULAR)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
index cc380c36e1a..cc3511a5cd0 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -2581,7 +2581,7 @@ static int t4_sge_init_soft(struct adapter *adap)
 	#undef READ_FL_BUF
 
 	if (fl_small_pg != PAGE_SIZE ||
-	    (fl_large_pg != 0 && (fl_large_pg <= fl_small_pg ||
+	    (fl_large_pg != 0 && (fl_large_pg < fl_small_pg ||
 				  (fl_large_pg & (fl_large_pg-1)) != 0))) {
 		dev_err(adap->pdev_dev, "bad SGE FL page buffer sizes [%d, %d]\n",
 			fl_small_pg, fl_large_pg);
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 5878df619b5..4ccaf9af6fc 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -104,6 +104,7 @@ static inline char *nic_name(struct pci_dev *pdev)
 #define BE3_MAX_RSS_QS		16
 #define BE3_MAX_TX_QS		16
 #define BE3_MAX_EVT_QS		16
+#define BE3_SRIOV_MAX_EVT_QS	8
 
 #define MAX_RX_QS		32
 #define MAX_EVT_QS		32
@@ -480,7 +481,7 @@ struct be_adapter {
 	struct list_head entry;
 
 	u32 flash_status;
-	struct completion flash_compl;
+	struct completion et_cmd_compl;
 
 	struct be_resources res;	/* resources available for the func */
 	u16 num_vfs;			/* Number of VFs provisioned by PF */
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index e0e8bc1ef14..94c35c8d799 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -141,11 +141,17 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
 		subsystem = resp_hdr->subsystem;
 	}
 
+	if (opcode == OPCODE_LOWLEVEL_LOOPBACK_TEST &&
+	    subsystem == CMD_SUBSYSTEM_LOWLEVEL) {
+		complete(&adapter->et_cmd_compl);
+		return 0;
+	}
+
 	if (((opcode == OPCODE_COMMON_WRITE_FLASHROM) ||
 	     (opcode == OPCODE_COMMON_WRITE_OBJECT)) &&
 	    (subsystem == CMD_SUBSYSTEM_COMMON)) {
 		adapter->flash_status = compl_status;
-		complete(&adapter->flash_compl);
+		complete(&adapter->et_cmd_compl);
 	}
 
 	if (compl_status == MCC_STATUS_SUCCESS) {
@@ -2017,6 +2023,9 @@ int be_cmd_rss_config(struct be_adapter *adapter, u8 *rsstable,
 			0x3ea83c02, 0x4a110304};
 	int status;
 
+	if (!(be_if_cap_flags(adapter) & BE_IF_FLAGS_RSS))
+		return 0;
+
 	if (mutex_lock_interruptible(&adapter->mbox_lock))
 		return -1;
 
@@ -2160,7 +2169,7 @@ int lancer_cmd_write_object(struct be_adapter *adapter, struct be_dma_mem *cmd,
 	be_mcc_notify(adapter);
 	spin_unlock_bh(&adapter->mcc_lock);
 
-	if (!wait_for_completion_timeout(&adapter->flash_compl,
+	if (!wait_for_completion_timeout(&adapter->et_cmd_compl,
 					 msecs_to_jiffies(60000)))
 		status = -1;
 	else
@@ -2255,8 +2264,8 @@ int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
 	be_mcc_notify(adapter);
 	spin_unlock_bh(&adapter->mcc_lock);
 
-	if (!wait_for_completion_timeout(&adapter->flash_compl,
-			msecs_to_jiffies(40000)))
+	if (!wait_for_completion_timeout(&adapter->et_cmd_compl,
+					 msecs_to_jiffies(40000)))
 		status = -1;
 	else
 		status = adapter->flash_status;
@@ -2367,6 +2376,7 @@ int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num,
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_loopback_test *req;
+	struct be_cmd_resp_loopback_test *resp;
 	int status;
 
 	spin_lock_bh(&adapter->mcc_lock);
@@ -2381,8 +2391,8 @@ int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num,
 
 	be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
 			OPCODE_LOWLEVEL_LOOPBACK_TEST, sizeof(*req), wrb, NULL);
-	req->hdr.timeout = cpu_to_le32(4);
 
+	req->hdr.timeout = cpu_to_le32(15);
 	req->pattern = cpu_to_le64(pattern);
 	req->src_port = cpu_to_le32(port_num);
 	req->dest_port = cpu_to_le32(port_num);
@@ -2390,12 +2400,15 @@ int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num,
 	req->num_pkts = cpu_to_le32(num_pkts);
 	req->loopback_type = cpu_to_le32(loopback_type);
 
-	status = be_mcc_notify_wait(adapter);
-	if (!status) {
-		struct be_cmd_resp_loopback_test *resp = embedded_payload(wrb);
-		status = le32_to_cpu(resp->status);
-	}
+	be_mcc_notify(adapter);
+
+	spin_unlock_bh(&adapter->mcc_lock);
 
+	wait_for_completion(&adapter->et_cmd_compl);
+	resp = embedded_payload(wrb);
+	status = le32_to_cpu(resp->status);
+
+	return status;
 err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 0fde69d5cb6..bf40fdaecfa 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2744,13 +2744,16 @@ static int be_rx_qs_create(struct be_adapter *adapter)
 		if (!BEx_chip(adapter))
 			adapter->rss_flags |= RSS_ENABLE_UDP_IPV4 |
 						RSS_ENABLE_UDP_IPV6;
+	} else {
+		/* Disable RSS, if only default RX Q is created */
+		adapter->rss_flags = RSS_ENABLE_NONE;
+	}
 
-		rc = be_cmd_rss_config(adapter, rsstable, adapter->rss_flags,
-				       128);
-		if (rc) {
-			adapter->rss_flags = 0;
-			return rc;
-		}
+	rc = be_cmd_rss_config(adapter, rsstable, adapter->rss_flags,
+			       128);
+	if (rc) {
+		adapter->rss_flags = RSS_ENABLE_NONE;
+		return rc;
 	}
 
 	/* First time posting */
@@ -3124,11 +3127,11 @@ static void BEx_get_resources(struct be_adapter *adapter,
 {
 	struct pci_dev *pdev = adapter->pdev;
 	bool use_sriov = false;
+	int max_vfs;
 
-	if (BE3_chip(adapter) && sriov_want(adapter)) {
-		int max_vfs;
+	max_vfs = pci_sriov_get_totalvfs(pdev);
 
-		max_vfs = pci_sriov_get_totalvfs(pdev);
+	if (BE3_chip(adapter) && sriov_want(adapter)) {
 		res->max_vfs = max_vfs > 0 ? min(MAX_VFS, max_vfs) : 0;
 		use_sriov = res->max_vfs;
 	}
@@ -3159,7 +3162,11 @@ static void BEx_get_resources(struct be_adapter *adapter,
 					   BE3_MAX_RSS_QS : BE2_MAX_RSS_QS;
 	res->max_rx_qs = res->max_rss_qs + 1;
 
-	res->max_evt_qs = be_physfn(adapter) ? BE3_MAX_EVT_QS : 1;
+	if (be_physfn(adapter))
+		res->max_evt_qs = (max_vfs > 0) ?
+					BE3_SRIOV_MAX_EVT_QS : BE3_MAX_EVT_QS;
+	else
+		res->max_evt_qs = 1;
 
 	res->if_cap_flags = BE_IF_CAP_FLAGS_WANT;
 	if (!(adapter->function_caps & BE_FUNCTION_CAPS_RSS))
@@ -4205,7 +4212,7 @@ static int be_ctrl_init(struct be_adapter *adapter)
 	spin_lock_init(&adapter->mcc_lock);
 	spin_lock_init(&adapter->mcc_cq_lock);
 
-	init_completion(&adapter->flash_compl);
+	init_completion(&adapter->et_cmd_compl);
 	pci_save_state(adapter->pdev);
 	return 0;
 
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 45b8b22b998..50bb71c663e 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2049,8 +2049,6 @@ static void fec_reset_phy(struct platform_device *pdev)
 	int err, phy_reset;
 	int msec = 1;
 	struct device_node *np = pdev->dev.of_node;
-	enum of_gpio_flags flags;
-	bool port;
 
 	if (!np)
 		return;
@@ -2060,22 +2058,18 @@ static void fec_reset_phy(struct platform_device *pdev)
 	if (msec > 1000)
 		msec = 1;
 
-	phy_reset = of_get_named_gpio_flags(np, "phy-reset-gpios", 0, &flags);
+	phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
 	if (!gpio_is_valid(phy_reset))
 		return;
 
-	if (flags & OF_GPIO_ACTIVE_LOW)
-		port = GPIOF_OUT_INIT_LOW;
-	else
-		port = GPIOF_OUT_INIT_HIGH;
-
-	err = devm_gpio_request_one(&pdev->dev, phy_reset, port, "phy-reset");
+	err = devm_gpio_request_one(&pdev->dev, phy_reset,
+				    GPIOF_OUT_INIT_LOW, "phy-reset");
 	if (err) {
 		dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
 		return;
 	}
 	msleep(msec);
-	gpio_set_value(phy_reset, !port);
+	gpio_set_value(phy_reset, 1);
 }
 #else /* CONFIG_OF */
 static void fec_reset_phy(struct platform_device *pdev)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 631ea0ac1cd..ff80cd8f6d2 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -487,6 +487,7 @@ struct qlcnic_hardware_context {
 	struct qlcnic_mailbox *mailbox;
 	u8 extend_lb_time;
 	u8 phys_port_id[ETH_ALEN];
+	u8 lb_mode;
 };
 
 struct qlcnic_adapter_stats {
@@ -578,6 +579,8 @@ struct qlcnic_host_tx_ring {
 	dma_addr_t phys_addr;
 	dma_addr_t hw_cons_phys_addr;
 	struct netdev_queue *txq;
+	/* Lock to protect Tx descriptors cleanup */
+	spinlock_t tx_clean_lock;
 } ____cacheline_internodealigned_in_smp;
 
 /*
@@ -808,6 +811,7 @@ struct qlcnic_mac_list_s {
 
 #define QLCNIC_ILB_MODE		0x1
 #define QLCNIC_ELB_MODE		0x2
+#define QLCNIC_LB_MODE_MASK	0x3
 
 #define QLCNIC_LINKEVENT	0x1
 #define QLCNIC_LB_RESPONSE	0x2
@@ -1093,7 +1097,6 @@ struct qlcnic_adapter {
 	struct qlcnic_filter_hash rx_fhash;
 	struct list_head vf_mc_list;
 
-	spinlock_t tx_clean_lock;
 	spinlock_t mac_learn_lock;
 	/* spinlock for catching rcv filters for eswitch traffic */
 	spinlock_t rx_mac_learn_lock;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index 6055d397a29..f776f99f791 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -1684,12 +1684,6 @@ int qlcnic_83xx_loopback_test(struct net_device *netdev, u8 mode)
 		}
 	} while ((adapter->ahw->linkup && ahw->has_link_events) != 1);
 
-	/* Make sure carrier is off and queue is stopped during loopback */
-	if (netif_running(netdev)) {
-		netif_carrier_off(netdev);
-		netif_tx_stop_all_queues(netdev);
-	}
-
 	ret = qlcnic_do_lb_test(adapter, mode);
 
 	qlcnic_83xx_clear_lb_mode(adapter, mode);
@@ -2121,6 +2115,7 @@ static void qlcnic_83xx_handle_link_aen(struct qlcnic_adapter *adapter,
 	ahw->link_autoneg = MSB(MSW(data[3]));
 	ahw->module_type = MSB(LSW(data[3]));
 	ahw->has_link_events = 1;
+	ahw->lb_mode = data[4] & QLCNIC_LB_MODE_MASK;
 	qlcnic_advert_link_change(adapter, link_status);
 }
 
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
index e9c21e5d0ca..c4262c23ed7 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
@@ -134,6 +134,8 @@ void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter,
 	struct qlcnic_skb_frag *buffrag;
 	int i, j;
 
+	spin_lock(&tx_ring->tx_clean_lock);
+
 	cmd_buf = tx_ring->cmd_buf_arr;
 	for (i = 0; i < tx_ring->num_desc; i++) {
 		buffrag = cmd_buf->frag_array;
@@ -157,6 +159,8 @@ void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter,
 		}
 		cmd_buf++;
 	}
+
+	spin_unlock(&tx_ring->tx_clean_lock);
 }
 
 void qlcnic_free_sw_resources(struct qlcnic_adapter *adapter)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
index eda6c691d89..ad1531ae3aa 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
@@ -689,6 +689,10 @@ void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup)
 		adapter->ahw->linkup = 0;
 		netif_carrier_off(netdev);
 	} else if (!adapter->ahw->linkup && linkup) {
+		/* Do not advertise Link up if the port is in loopback mode */
+		if (qlcnic_83xx_check(adapter) && adapter->ahw->lb_mode)
+			return;
+
 		netdev_info(netdev, "NIC Link is up\n");
 		adapter->ahw->linkup = 1;
 		netif_carrier_on(netdev);
@@ -778,7 +782,7 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter,
 	struct net_device *netdev = adapter->netdev;
 	struct qlcnic_skb_frag *frag;
 
-	if (!spin_trylock(&adapter->tx_clean_lock))
+	if (!spin_trylock(&tx_ring->tx_clean_lock))
 		return 1;
 
 	sw_consumer = tx_ring->sw_consumer;
@@ -807,8 +811,9 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter,
 			break;
 	}
 
+	tx_ring->sw_consumer = sw_consumer;
+
 	if (count && netif_running(netdev)) {
-		tx_ring->sw_consumer = sw_consumer;
 		smp_mb();
 		if (netif_tx_queue_stopped(tx_ring->txq) &&
 		    netif_carrier_ok(netdev)) {
@@ -834,7 +839,8 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter,
 	 */
 	hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer));
 	done = (sw_consumer == hw_consumer);
-	spin_unlock(&adapter->tx_clean_lock);
+
+	spin_unlock(&tx_ring->tx_clean_lock);
 
 	return done;
 }
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 2c8cac0c6a5..b8a245a79de 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -1756,7 +1756,6 @@ void __qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev)
 	if (qlcnic_sriov_vf_check(adapter))
 		qlcnic_sriov_cleanup_async_list(&adapter->ahw->sriov->bc);
 	smp_mb();
-	spin_lock(&adapter->tx_clean_lock);
 	netif_carrier_off(netdev);
 	adapter->ahw->linkup = 0;
 	netif_tx_disable(netdev);
@@ -1777,7 +1776,6 @@ void __qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev)
 
 	for (ring = 0; ring < adapter->drv_tx_rings; ring++)
 		qlcnic_release_tx_buffers(adapter, &adapter->tx_ring[ring]);
-	spin_unlock(&adapter->tx_clean_lock);
 }
 
 /* Usage: During suspend and firmware recovery module */
@@ -2172,6 +2170,7 @@ int qlcnic_alloc_tx_rings(struct qlcnic_adapter *adapter,
 		}
 		memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(tx_ring));
 		tx_ring->cmd_buf_arr = cmd_buf_arr;
+		spin_lock_init(&tx_ring->tx_clean_lock);
 	}
 
 	if (qlcnic_83xx_check(adapter) ||
@@ -2299,7 +2298,6 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	rwlock_init(&adapter->ahw->crb_lock);
 	mutex_init(&adapter->ahw->mem_lock);
 
-	spin_lock_init(&adapter->tx_clean_lock);
 	INIT_LIST_HEAD(&adapter->mac_list);
 
 	qlcnic_register_dcb(adapter);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
index 686f460b150..024f8161d2f 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
@@ -75,7 +75,6 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter,
 	num_vfs = sriov->num_vfs;
 	max = num_vfs + 1;
 	info->bit_offsets = 0xffff;
-	info->max_tx_ques = res->num_tx_queues / max;
 	info->max_rx_mcast_mac_filters = res->num_rx_mcast_mac_filters;
 	num_vf_macs = QLCNIC_SRIOV_VF_MAX_MAC;
 
@@ -86,6 +85,7 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter,
 		info->max_tx_mac_filters = temp;
 		info->min_tx_bw = 0;
 		info->max_tx_bw = MAX_BW;
+		info->max_tx_ques = res->num_tx_queues - sriov->num_vfs;
 	} else {
 		id = qlcnic_sriov_func_to_index(adapter, func);
 		if (id < 0)
@@ -95,6 +95,7 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter,
 		info->max_tx_bw = vp->max_tx_bw;
 		info->max_rx_ucast_mac_filters = num_vf_macs;
 		info->max_tx_mac_filters = num_vf_macs;
+		info->max_tx_ques = QLCNIC_SINGLE_RING;
 	}
 
 	info->max_rx_ip_addr = res->num_destip / max;
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 86292e6aaf4..1a482344b3f 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -185,7 +185,6 @@ enum rx_ctrl_state{
 #define BM_REQUEST_TYPE (0xa1)
 #define B_NOTIFICATION  (0x20)
 #define W_VALUE         (0x0)
-#define W_INDEX         (0x2)
 #define W_LENGTH        (0x2)
 
 #define B_OVERRUN       (0x1<<6)
@@ -1487,6 +1486,7 @@ static void tiocmget_intr_callback(struct urb *urb)
 	struct uart_icount *icount;
 	struct hso_serial_state_notification *serial_state_notification;
 	struct usb_device *usb;
+	int if_num;
 
 	/* Sanity checks */
 	if (!serial)
@@ -1495,15 +1495,24 @@ static void tiocmget_intr_callback(struct urb *urb)
 		handle_usb_error(status, __func__, serial->parent);
 		return;
 	}
+
+	/* tiocmget is only supported on HSO_PORT_MODEM */
 	tiocmget = serial->tiocmget;
 	if (!tiocmget)
 		return;
+	BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM);
+
 	usb = serial->parent->usb;
+	if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
+
+	/* wIndex should be the USB interface number of the port to which the
+	 * notification applies, which should always be the Modem port.
+	 */
 	serial_state_notification = &tiocmget->serial_state_notification;
 	if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
 	    serial_state_notification->bNotification != B_NOTIFICATION ||
 	    le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
-	    le16_to_cpu(serial_state_notification->wIndex) != W_INDEX ||
+	    le16_to_cpu(serial_state_notification->wIndex) != if_num ||
 	    le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) {
 		dev_warn(&usb->dev,
 			 "hso received invalid serial state notification\n");
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 03832d3780a..f5463782857 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -117,7 +117,6 @@ enum {
 struct mcs7830_data {
 	u8 multi_filter[8];
 	u8 config;
-	u8 link_counter;
 };
 
 static const char driver_name[] = "MOSCHIP usb-ethernet driver";
@@ -561,26 +560,16 @@ static void mcs7830_status(struct usbnet *dev, struct urb *urb)
 {
 	u8 *buf = urb->transfer_buffer;
 	bool link, link_changed;
-	struct mcs7830_data *data = mcs7830_get_data(dev);
 
 	if (urb->actual_length < 16)
 		return;
 
-	link = !(buf[1] & 0x20);
+	link = !(buf[1] == 0x20);
 	link_changed = netif_carrier_ok(dev->net) != link;
 	if (link_changed) {
-		data->link_counter++;
-		/*
-		   track link state 20 times to guard against erroneous
-		   link state changes reported sometimes by the chip
-		 */
-		if (data->link_counter > 20) {
-			data->link_counter = 0;
-			usbnet_link_change(dev, link, 0);
-			netdev_dbg(dev->net, "Link Status is: %d\n", link);
-		}
-	} else
-		data->link_counter = 0;
+		usbnet_link_change(dev, link, 0);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
+	}
 }
 
 static const struct driver_info moschip_info = {
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index d208f860498..5d776447d9c 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1797,16 +1797,17 @@ static int virtnet_restore(struct virtio_device *vdev)
 	if (err)
 		return err;
 
-	if (netif_running(vi->dev))
+	if (netif_running(vi->dev)) {
+		for (i = 0; i < vi->curr_queue_pairs; i++)
+			if (!try_fill_recv(&vi->rq[i], GFP_KERNEL))
+				schedule_delayed_work(&vi->refill, 0);
+
 		for (i = 0; i < vi->max_queue_pairs; i++)
 			virtnet_napi_enable(&vi->rq[i]);
+	}
 
 	netif_device_attach(vi->dev);
 
-	for (i = 0; i < vi->curr_queue_pairs; i++)
-		if (!try_fill_recv(&vi->rq[i], GFP_KERNEL))
-			schedule_delayed_work(&vi->refill, 0);
-
 	mutex_lock(&vi->config_lock);
 	vi->config_enable = true;
 	mutex_unlock(&vi->config_lock);
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 249e01c5600..ed384fee76a 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -2440,7 +2440,8 @@ static int vxlan_newlink(struct net *net, struct net_device *dev,
 		/* update header length based on lower device */
 		dev->hard_header_len = lowerdev->hard_header_len +
 				       (use_ipv6 ? VXLAN6_HEADROOM : VXLAN_HEADROOM);
-	}
+	} else if (use_ipv6)
+		vxlan->flags |= VXLAN_F_IPV6;
 
 	if (data[IFLA_VXLAN_TOS])
 		vxlan->tos  = nla_get_u8(data[IFLA_VXLAN_TOS]);
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index 34ca4e58a43..fff8cddfed8 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -34,6 +34,7 @@
 #include <linux/ethtool.h>
 #include <linux/rtnetlink.h>
 #include <linux/if_vlan.h>
+#include <linux/vmalloc.h>
 
 #include <xen/events.h>
 #include <asm/xen/hypercall.h>