Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (21 commits)
  dmaengine: add slave-dma maintainer
  dma: ipu_idmac: do not lose valid received data in the irq handler
  dmaengine: imx-sdma: fix up param for the last BD in sdma_prep_slave_sg()
  dmaengine: imx-sdma: correct sdmac->status in sdma_handle_channel_loop()
  dmaengine: imx-sdma: return sdmac->status in sdma_tx_status()
  dmaengine: imx-sdma: set sdmac->status to DMA_ERROR in err_out of sdma_prep_slave_sg()
  dmaengine: imx-sdma: remove IMX_DMA_SG_LOOP handling in sdma_prep_slave_sg()
  dmaengine i.MX dma: initialize dma capabilities outside channel loop
  dmaengine i.MX DMA: do not initialize chan_id field
  dmaengine i.MX dma: check sg entries for valid addresses and lengths
  dmaengine i.MX dma: set maximum segment size for our device
  dmaengine i.MX SDMA: reserve channel 0 by not registering it
  dmaengine i.MX SDMA: initialize dma capabilities outside channel loop
  dmaengine i.MX SDMA: do not initialize chan_id field
  dmaengine i.MX sdma: check sg entries for valid addresses and lengths
  dmaengine i.MX sdma: set maximum segment size for our device
  DMA: PL08x: fix channel pausing to timeout rather than lockup
  DMA: PL08x: fix infinite wait when terminating transfers
  dmaengine: imx-sdma: fix inconsistent naming in sdma_assign_cookie()
  dmaengine: imx-sdma: propagate error in sdma_probe() instead of returning 0
  ...

4 files changed, 102 insertions, 115 deletions

diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 297f48b0cba..07bca4970e5 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -79,6 +79,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 #include <linux/dmapool.h>
 #include <linux/dmaengine.h>
 #include <linux/amba/bus.h>
@@ -235,16 +236,19 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan,
 }
 
 /*
- * Overall DMAC remains enabled always.
+ * Pause the channel by setting the HALT bit.
  *
- * Disabling individual channels could lose data.
+ * For M->P transfers, pause the DMAC first and then stop the peripheral -
+ * the FIFO can only drain if the peripheral is still requesting data.
+ * (note: this can still timeout if the DMAC FIFO never drains of data.)
  *
- * Disable the peripheral DMA after disabling the DMAC in order to allow
- * the DMAC FIFO to drain, and hence allow the channel to show inactive
+ * For P->M transfers, disable the peripheral first to stop it filling
+ * the DMAC FIFO, and then pause the DMAC.
  */
 static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch)
 {
 	u32 val;
+	int timeout;
 
 	/* Set the HALT bit and wait for the FIFO to drain */
 	val = readl(ch->base + PL080_CH_CONFIG);
@@ -252,8 +256,13 @@ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch)
 	writel(val, ch->base + PL080_CH_CONFIG);
 
 	/* Wait for channel inactive */
-	while (pl08x_phy_channel_busy(ch))
-		cpu_relax();
+	for (timeout = 1000; timeout; timeout--) {
+		if (!pl08x_phy_channel_busy(ch))
+			break;
+		udelay(1);
+	}
+	if (pl08x_phy_channel_busy(ch))
+		pr_err("pl08x: channel%u timeout waiting for pause\n", ch->id);
 }
 
 static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
@@ -267,19 +276,24 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
 }
 
 
-/* Stops the channel */
-static void pl08x_stop_phy_chan(struct pl08x_phy_chan *ch)
+/*
+ * pl08x_terminate_phy_chan() stops the channel, clears the FIFO and
+ * clears any pending interrupt status.  This should not be used for
+ * an on-going transfer, but as a method of shutting down a channel
+ * (eg, when it's no longer used) or terminating a transfer.
+ */
+static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x,
+	struct pl08x_phy_chan *ch)
 {
-	u32 val;
+	u32 val = readl(ch->base + PL080_CH_CONFIG);
 
-	pl08x_pause_phy_chan(ch);
+	val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK |
+	         PL080_CONFIG_TC_IRQ_MASK);
 
-	/* Disable channel */
-	val = readl(ch->base + PL080_CH_CONFIG);
-	val &= ~PL080_CONFIG_ENABLE;
-	val &= ~PL080_CONFIG_ERR_IRQ_MASK;
-	val &= ~PL080_CONFIG_TC_IRQ_MASK;
 	writel(val, ch->base + PL080_CH_CONFIG);
+
+	writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR);
+	writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR);
 }
 
 static inline u32 get_bytes_in_cctl(u32 cctl)
@@ -404,13 +418,12 @@ static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x,
 {
 	unsigned long flags;
 
+	spin_lock_irqsave(&ch->lock, flags);
+
 	/* Stop the channel and clear its interrupts */
-	pl08x_stop_phy_chan(ch);
-	writel((1 << ch->id), pl08x->base + PL080_ERR_CLEAR);
-	writel((1 << ch->id), pl08x->base + PL080_TC_CLEAR);
+	pl08x_terminate_phy_chan(pl08x, ch);
 
 	/* Mark it as free */
-	spin_lock_irqsave(&ch->lock, flags);
 	ch->serving = NULL;
 	spin_unlock_irqrestore(&ch->lock, flags);
 }
@@ -1449,7 +1462,7 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 		plchan->state = PL08X_CHAN_IDLE;
 
 		if (plchan->phychan) {
-			pl08x_stop_phy_chan(plchan->phychan);
+			pl08x_terminate_phy_chan(pl08x, plchan->phychan);
 
 			/*
 			 * Mark physical channel as free and free any slave
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index e53d438142b..e18eaabe92b 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -49,6 +49,7 @@ struct imxdma_channel {
 
 struct imxdma_engine {
 	struct device			*dev;
+	struct device_dma_parameters	dma_parms;
 	struct dma_device		dma_device;
 	struct imxdma_channel		channel[MAX_DMA_CHANNELS];
 };
@@ -242,6 +243,21 @@ static struct dma_async_tx_descriptor *imxdma_prep_slave_sg(
 	else
 		dmamode = DMA_MODE_WRITE;
 
+	switch (imxdmac->word_size) {
+	case DMA_SLAVE_BUSWIDTH_4_BYTES:
+		if (sgl->length & 3 || sgl->dma_address & 3)
+			return NULL;
+		break;
+	case DMA_SLAVE_BUSWIDTH_2_BYTES:
+		if (sgl->length & 1 || sgl->dma_address & 1)
+			return NULL;
+		break;
+	case DMA_SLAVE_BUSWIDTH_1_BYTE:
+		break;
+	default:
+		return NULL;
+	}
+
 	ret = imx_dma_setup_sg(imxdmac->imxdma_channel, sgl, sg_len,
 		 dma_length, imxdmac->per_address, dmamode);
 	if (ret)
@@ -329,6 +345,9 @@ static int __init imxdma_probe(struct platform_device *pdev)
 
 	INIT_LIST_HEAD(&imxdma->dma_device.channels);
 
+	dma_cap_set(DMA_SLAVE, imxdma->dma_device.cap_mask);
+	dma_cap_set(DMA_CYCLIC, imxdma->dma_device.cap_mask);
+
 	/* Initialize channel parameters */
 	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
 		struct imxdma_channel *imxdmac = &imxdma->channel[i];
@@ -346,11 +365,7 @@ static int __init imxdma_probe(struct platform_device *pdev)
 		imxdmac->imxdma = imxdma;
 		spin_lock_init(&imxdmac->lock);
 
-		dma_cap_set(DMA_SLAVE, imxdma->dma_device.cap_mask);
-		dma_cap_set(DMA_CYCLIC, imxdma->dma_device.cap_mask);
-
 		imxdmac->chan.device = &imxdma->dma_device;
-		imxdmac->chan.chan_id = i;
 		imxdmac->channel = i;
 
 		/* Add the channel to the DMAC list */
@@ -370,6 +385,9 @@ static int __init imxdma_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, imxdma);
 
+	imxdma->dma_device.dev->dma_parms = &imxdma->dma_parms;
+	dma_set_max_seg_size(imxdma->dma_device.dev, 0xffffff);
+
 	ret = dma_async_device_register(&imxdma->dma_device);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to register\n");
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index d5a5d4d9c19..b6d1455fa93 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -230,7 +230,7 @@ struct sdma_engine;
  * struct sdma_channel - housekeeping for a SDMA channel
  *
  * @sdma		pointer to the SDMA engine for this channel
- * @channel		the channel number, matches dmaengine chan_id
+ * @channel		the channel number, matches dmaengine chan_id + 1
  * @direction		transfer type. Needed for setting SDMA script
  * @peripheral_type	Peripheral type. Needed for setting SDMA script
  * @event_id0		aka dma request line
@@ -301,6 +301,7 @@ struct sdma_firmware_header {
 
 struct sdma_engine {
 	struct device			*dev;
+	struct device_dma_parameters	dma_parms;
 	struct sdma_channel		channel[MAX_DMA_CHANNELS];
 	struct sdma_channel_control	*channel_control;
 	void __iomem			*regs;
@@ -449,7 +450,7 @@ static void sdma_handle_channel_loop(struct sdma_channel *sdmac)
 		if (bd->mode.status & BD_RROR)
 			sdmac->status = DMA_ERROR;
 		else
-			sdmac->status = DMA_SUCCESS;
+			sdmac->status = DMA_IN_PROGRESS;
 
 		bd->mode.status |= BD_DONE;
 		sdmac->buf_tail++;
@@ -770,15 +771,15 @@ static void sdma_enable_channel(struct sdma_engine *sdma, int channel)
 	__raw_writel(1 << channel, sdma->regs + SDMA_H_START);
 }
 
-static dma_cookie_t sdma_assign_cookie(struct sdma_channel *sdma)
+static dma_cookie_t sdma_assign_cookie(struct sdma_channel *sdmac)
 {
-	dma_cookie_t cookie = sdma->chan.cookie;
+	dma_cookie_t cookie = sdmac->chan.cookie;
 
 	if (++cookie < 0)
 		cookie = 1;
 
-	sdma->chan.cookie = cookie;
-	sdma->desc.cookie = cookie;
+	sdmac->chan.cookie = cookie;
+	sdmac->desc.cookie = cookie;
 
 	return cookie;
 }
@@ -798,7 +799,7 @@ static dma_cookie_t sdma_tx_submit(struct dma_async_tx_descriptor *tx)
 
 	cookie = sdma_assign_cookie(sdmac);
 
-	sdma_enable_channel(sdma, tx->chan->chan_id);
+	sdma_enable_channel(sdma, sdmac->channel);
 
 	spin_unlock_irq(&sdmac->lock);
 
@@ -811,10 +812,6 @@ static int sdma_alloc_chan_resources(struct dma_chan *chan)
 	struct imx_dma_data *data = chan->private;
 	int prio, ret;
 
-	/* No need to execute this for internal channel 0 */
-	if (chan->chan_id == 0)
-		return 0;
-
 	if (!data)
 		return -EINVAL;
 
@@ -879,7 +876,7 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
 	struct sdma_engine *sdma = sdmac->sdma;
 	int ret, i, count;
-	int channel = chan->chan_id;
+	int channel = sdmac->channel;
 	struct scatterlist *sg;
 
 	if (sdmac->status == DMA_IN_PROGRESS)
@@ -924,22 +921,33 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
 			ret =  -EINVAL;
 			goto err_out;
 		}
-		if (sdmac->word_size == DMA_SLAVE_BUSWIDTH_4_BYTES)
+
+		switch (sdmac->word_size) {
+		case DMA_SLAVE_BUSWIDTH_4_BYTES:
 			bd->mode.command = 0;
-		else
-			bd->mode.command = sdmac->word_size;
+			if (count & 3 || sg->dma_address & 3)
+				return NULL;
+			break;
+		case DMA_SLAVE_BUSWIDTH_2_BYTES:
+			bd->mode.command = 2;
+			if (count & 1 || sg->dma_address & 1)
+				return NULL;
+			break;
+		case DMA_SLAVE_BUSWIDTH_1_BYTE:
+			bd->mode.command = 1;
+			break;
+		default:
+			return NULL;
+		}
 
 		param = BD_DONE | BD_EXTD | BD_CONT;
 
-		if (sdmac->flags & IMX_DMA_SG_LOOP) {
+		if (i + 1 == sg_len) {
 			param |= BD_INTR;
-			if (i + 1 == sg_len)
-				param |= BD_WRAP;
+			param |= BD_LAST;
+			param &= ~BD_CONT;
 		}
 
-		if (i + 1 == sg_len)
-			param |= BD_INTR;
-
 		dev_dbg(sdma->dev, "entry %d: count: %d dma: 0x%08x %s%s\n",
 				i, count, sg->dma_address,
 				param & BD_WRAP ? "wrap" : "",
@@ -953,6 +961,7 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
 
 	return &sdmac->desc;
 err_out:
+	sdmac->status = DMA_ERROR;
 	return NULL;
 }
 
@@ -963,7 +972,7 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
 	struct sdma_engine *sdma = sdmac->sdma;
 	int num_periods = buf_len / period_len;
-	int channel = chan->chan_id;
+	int channel = sdmac->channel;
 	int ret, i = 0, buf = 0;
 
 	dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel);
@@ -1066,14 +1075,12 @@ static enum dma_status sdma_tx_status(struct dma_chan *chan,
 {
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
 	dma_cookie_t last_used;
-	enum dma_status ret;
 
 	last_used = chan->cookie;
 
-	ret = dma_async_is_complete(cookie, sdmac->last_completed, last_used);
 	dma_set_tx_state(txstate, sdmac->last_completed, last_used, 0);
 
-	return ret;
+	return sdmac->status;
 }
 
 static void sdma_issue_pending(struct dma_chan *chan)
@@ -1135,7 +1142,7 @@ static int __init sdma_get_firmware(struct sdma_engine *sdma,
 	/* download the RAM image for SDMA */
 	sdma_load_script(sdma, ram_code,
 			header->ram_code_size,
-			sdma->script_addrs->ram_code_start_addr);
+			addr->ram_code_start_addr);
 	clk_disable(sdma->clk);
 
 	sdma_add_scripts(sdma, addr);
@@ -1237,7 +1244,6 @@ static int __init sdma_probe(struct platform_device *pdev)
 	struct resource *iores;
 	struct sdma_platform_data *pdata = pdev->dev.platform_data;
 	int i;
-	dma_cap_mask_t mask;
 	struct sdma_engine *sdma;
 
 	sdma = kzalloc(sizeof(*sdma), GFP_KERNEL);
@@ -1280,6 +1286,9 @@ static int __init sdma_probe(struct platform_device *pdev)
 
 	sdma->version = pdata->sdma_version;
 
+	dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask);
+	dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask);
+
 	INIT_LIST_HEAD(&sdma->dma_device.channels);
 	/* Initialize channel parameters */
 	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
@@ -1288,15 +1297,17 @@ static int __init sdma_probe(struct platform_device *pdev)
 		sdmac->sdma = sdma;
 		spin_lock_init(&sdmac->lock);
 
-		dma_cap_set(DMA_SLAVE, sdma->dma_device.cap_mask);
-		dma_cap_set(DMA_CYCLIC, sdma->dma_device.cap_mask);
-
 		sdmac->chan.device = &sdma->dma_device;
-		sdmac->chan.chan_id = i;
 		sdmac->channel = i;
 
-		/* Add the channel to the DMAC list */
-		list_add_tail(&sdmac->chan.device_node, &sdma->dma_device.channels);
+		/*
+		 * Add the channel to the DMAC list. Do not add channel 0 though
+		 * because we need it internally in the SDMA driver. This also means
+		 * that channel 0 in dmaengine counting matches sdma channel 1.
+		 */
+		if (i)
+			list_add_tail(&sdmac->chan.device_node,
+					&sdma->dma_device.channels);
 	}
 
 	ret = sdma_init(sdma);
@@ -1317,6 +1328,8 @@ static int __init sdma_probe(struct platform_device *pdev)
 	sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic;
 	sdma->dma_device.device_control = sdma_control;
 	sdma->dma_device.device_issue_pending = sdma_issue_pending;
+	sdma->dma_device.dev->dma_parms = &sdma->dma_parms;
+	dma_set_max_seg_size(sdma->dma_device.dev, 65535);
 
 	ret = dma_async_device_register(&sdma->dma_device);
 	if (ret) {
@@ -1324,13 +1337,6 @@ static int __init sdma_probe(struct platform_device *pdev)
 		goto err_init;
 	}
 
-	/* request channel 0. This is an internal control channel
-	 * to the SDMA engine and not available to clients.
-	 */
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	dma_request_channel(mask, NULL, NULL);
-
 	dev_info(sdma->dev, "initialized\n");
 
 	return 0;
@@ -1348,7 +1354,7 @@ err_clk:
 err_request_region:
 err_irq:
 	kfree(sdma);
-	return 0;
+	return ret;
 }
 
 static int __exit sdma_remove(struct platform_device *pdev)
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index cb26ee9773d..c1a125e7d1d 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1145,29 +1145,6 @@ static int ipu_disable_channel(struct idmac *idmac, struct idmac_channel *ichan,
 	reg = idmac_read_icreg(ipu, IDMAC_CHA_EN);
 	idmac_write_icreg(ipu, reg & ~chan_mask, IDMAC_CHA_EN);
 
-	/*
-	 * Problem (observed with channel DMAIC_7): after enabling the channel
-	 * and initialising buffers, there comes an interrupt with current still
-	 * pointing at buffer 0, whereas it should use buffer 0 first and only
-	 * generate an interrupt when it is done, then current should already
-	 * point to buffer 1. This spurious interrupt also comes on channel
-	 * DMASDC_0. With DMAIC_7 normally, is we just leave the ISR after the
-	 * first interrupt, there comes the second with current correctly
-	 * pointing to buffer 1 this time. But sometimes this second interrupt
-	 * doesn't come and the channel hangs. Clearing BUFx_RDY when disabling
-	 * the channel seems to prevent the channel from hanging, but it doesn't
-	 * prevent the spurious interrupt. This might also be unsafe. Think
-	 * about the IDMAC controller trying to switch to a buffer, when we
-	 * clear the ready bit, and re-enable it a moment later.
-	 */
-	reg = idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY);
-	idmac_write_ipureg(ipu, 0, IPU_CHA_BUF0_RDY);
-	idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF0_RDY);
-
-	reg = idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY);
-	idmac_write_ipureg(ipu, 0, IPU_CHA_BUF1_RDY);
-	idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF1_RDY);
-
 	spin_unlock_irqrestore(&ipu->lock, flags);
 
 	return 0;
@@ -1246,33 +1223,6 @@ static irqreturn_t idmac_interrupt(int irq, void *dev_id)
 
 	/* Other interrupts do not interfere with this channel */
 	spin_lock(&ichan->lock);
-	if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 &&
-		     ((curbuf >> chan_id) & 1) == ichan->active_buffer &&
-		     !list_is_last(ichan->queue.next, &ichan->queue))) {
-		int i = 100;
-
-		/* This doesn't help. See comment in ipu_disable_channel() */
-		while (--i) {
-			curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF);
-			if (((curbuf >> chan_id) & 1) != ichan->active_buffer)
-				break;
-			cpu_relax();
-		}
-
-		if (!i) {
-			spin_unlock(&ichan->lock);
-			dev_dbg(dev,
-				"IRQ on active buffer on channel %x, active "
-				"%d, ready %x, %x, current %x!\n", chan_id,
-				ichan->active_buffer, ready0, ready1, curbuf);
-			return IRQ_NONE;
-		} else
-			dev_dbg(dev,
-				"Buffer deactivated on channel %x, active "
-				"%d, ready %x, %x, current %x, rest %d!\n", chan_id,
-				ichan->active_buffer, ready0, ready1, curbuf, i);
-	}
-
 	if (unlikely((ichan->active_buffer && (ready1 >> chan_id) & 1) ||
 		     (!ichan->active_buffer && (ready0 >> chan_id) & 1)
 		     )) {