[SCSI] qla2xxx: Clear drive active CRB register when not in use.

The CRB drive active register is cleared when driver is unloaded
or when driver enters failed state.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

6 files changed, 13 insertions, 5 deletions

diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 8217c3bcbc2..2247ef8702e 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -513,7 +513,6 @@ extern int qla82xx_nvram_config(struct scsi_qla_host *);
 extern int qla82xx_pinit_from_rom(scsi_qla_host_t *);
 extern int qla82xx_load_firmware(scsi_qla_host_t *);
 extern int qla82xx_reset_hw(scsi_qla_host_t *);
-extern int qla82xx_load_risc_blob(scsi_qla_host_t *, uint32_t *);
 extern void qla82xx_watchdog(scsi_qla_host_t *);
 
 /* Firmware and flash related functions */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index ab2cc71994c..f1db11a0d69 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1454,6 +1454,8 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 		rval = ha->isp_ops->load_risc(vha, &srisc_address);
 		if (rval == QLA_SUCCESS)
 			goto enable_82xx_npiv;
+		else
+			goto failed;
 	}
 
 	if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) {
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 8ef94536541..5d0e99c2b52 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1683,7 +1683,7 @@ qla2x00_login_iocb(srb_t *sp, struct mbx_entry *mbx)
 	struct srb_iocb *lio = ctx->u.iocb_cmd;
 	uint16_t opts;
 
-	mbx->entry_type = MBX_IOCB_TYPE;;
+	mbx->entry_type = MBX_IOCB_TYPE;
 	SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id);
 	mbx->mb0 = cpu_to_le16(MBC_LOGIN_FABRIC_PORT);
 	opts = lio->u.logio.flags & SRB_LOGIN_COND_PLOGI ? BIT_0 : 0;
@@ -1718,7 +1718,7 @@ qla2x00_logout_iocb(srb_t *sp, struct mbx_entry *mbx)
 {
 	struct qla_hw_data *ha = sp->fcport->vha->hw;
 
-	mbx->entry_type = MBX_IOCB_TYPE;;
+	mbx->entry_type = MBX_IOCB_TYPE;
 	SET_TARGET_ID(ha, mbx->loop_id, sp->fcport->loop_id);
 	mbx->mb0 = cpu_to_le16(MBC_LOGOUT_FABRIC_PORT);
 	mbx->mb1 = HAS_EXTENDED_IDS(ha) ?
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index ff562de0e8e..eb12bf260a1 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -3279,6 +3279,10 @@ qla82xx_dev_failed_handler(scsi_qla_host_t *vha)
 	/* Disable the board */
 	qla_printk(KERN_INFO, ha, "Disabling the board\n");
 
+	qla82xx_idc_lock(ha);
+	qla82xx_clear_drv_active(ha);
+	qla82xx_idc_unlock(ha);
+
 	/* Set DEV_FAILED flag to disable timer */
 	vha->device_flags |= DFLG_DEV_FAILED;
 	qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16);
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index f8f99a5ea53..aa95d3816d6 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -538,11 +538,10 @@
 /* Driver Coexistence Defines */
 #define QLA82XX_CRB_DRV_ACTIVE	     (QLA82XX_CAM_RAM(0x138))
 #define QLA82XX_CRB_DEV_STATE	     (QLA82XX_CAM_RAM(0x140))
-#define QLA82XX_CRB_DEV_PART_INFO    (QLA82XX_CAM_RAM(0x14c))
-#define QLA82XX_CRB_DRV_IDC_VERSION  (QLA82XX_CAM_RAM(0x174))
 #define QLA82XX_CRB_DRV_STATE	     (QLA82XX_CAM_RAM(0x144))
 #define QLA82XX_CRB_DRV_SCRATCH      (QLA82XX_CAM_RAM(0x148))
 #define QLA82XX_CRB_DEV_PART_INFO    (QLA82XX_CAM_RAM(0x14c))
+#define QLA82XX_CRB_DRV_IDC_VERSION  (QLA82XX_CAM_RAM(0x174))
 
 /* Every driver should use these Device State */
 #define QLA82XX_DEV_COLD		1
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index be1a8fcbb1f..c345ba71672 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2402,6 +2402,10 @@ qla2x00_remove_one(struct pci_dev *pdev)
 	scsi_host_put(base_vha->host);
 
 	if (IS_QLA82XX(ha)) {
+		qla82xx_idc_lock(ha);
+		qla82xx_clear_drv_active(ha);
+		qla82xx_idc_unlock(ha);
+
 		iounmap((device_reg_t __iomem *)ha->nx_pcibase);
 		if (!ql2xdbwr)
 			iounmap((device_reg_t __iomem *)ha->nxdb_wr_ptr);