via-*: Move the VIA drivers

Move the VIA drivers into drivers/net/ethernet/via/ and make the
necessary Kconfig and Makefile changes.

CC: Roger Luethi <rl@hellgate.ch>
CC: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

9 files changed, 64 insertions, 38 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index cb6c6947b32..c1e491add8f 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -614,30 +614,6 @@ config KS8851_MLL
 	  This platform driver is for Micrel KS8851 Address/data bus
 	  multiplexed network chip.
 
-config VIA_RHINE
-	tristate "VIA Rhine support"
-	depends on NET_PCI && PCI
-	select CRC32
-	select MII
-	help
-	  If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
-	  Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
-	  Ethernet functions can also be found integrated on South Bridges
-	  (e.g. VT8235).
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called via-rhine.
-
-config VIA_RHINE_MMIO
-	bool "Use MMIO instead of PIO"
-	depends on VIA_RHINE
-	help
-	  This instructs the driver to use PCI shared memory (MMIO) instead of
-	  programmed I/O ports (PIO). Enabling this gives an improvement in
-	  processing time in parts of the driver.
-
-	  If unsure, say Y.
-
 config CPMAC
 	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
 	depends on NET_ETHERNET && EXPERIMENTAL && AR7
@@ -793,18 +769,6 @@ config SIS190
 	  To compile this driver as a module, choose M here: the module
 	  will be called sis190.  This is recommended.
 
-config VIA_VELOCITY
-	tristate "VIA Velocity support"
-	depends on PCI
-	select CRC32
-	select CRC_CCITT
-	select MII
-	help
-	  If you have a VIA "Velocity" based network card say Y here.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called via-velocity.
-
 config SPIDER_NET
 	tristate "Spider Gigabit Ethernet driver"
 	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 69ca6a009c5..7e1128fd62b 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -51,8 +51,6 @@ obj-$(CONFIG_KS8842)	+= ks8842.o
 obj-$(CONFIG_KS8851)	+= ks8851.o
 obj-$(CONFIG_KS8851_MLL)	+= ks8851_mll.o
 obj-$(CONFIG_KSZ884X_PCI)	+= ksz884x.o
-obj-$(CONFIG_VIA_RHINE) += via-rhine.o
-obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
 obj-$(CONFIG_RIONET) += rionet.o
 obj-$(CONFIG_SH_ETH) += sh_eth.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 1c447d96d7e..bdc0df873da 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -45,5 +45,6 @@ source "drivers/net/ethernet/smsc/Kconfig"
 source "drivers/net/ethernet/stmicro/Kconfig"
 source "drivers/net/ethernet/sun/Kconfig"
 source "drivers/net/ethernet/tehuti/Kconfig"
+source "drivers/net/ethernet/via/Kconfig"
 
 endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 48c8656b96c..ac60ac9026b 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -36,3 +36,4 @@ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
 obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
 obj-$(CONFIG_NET_VENDOR_SUN) += sun/
 obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
+obj-$(CONFIG_NET_VENDOR_VIA) += via/
diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
new file mode 100644
index 00000000000..7199194fa89
--- /dev/null
+++ b/drivers/net/ethernet/via/Kconfig
@@ -0,0 +1,56 @@
+#
+# VIA device configuration
+#
+
+config NET_VENDOR_VIA
+	bool "VIA devices"
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about VIA devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_VIA
+
+config VIA_RHINE
+	tristate "VIA Rhine support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
+	  Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
+	  Ethernet functions can also be found integrated on South Bridges
+	  (e.g. VT8235).
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called via-rhine.
+
+config VIA_RHINE_MMIO
+	bool "Use MMIO instead of PIO"
+	depends on VIA_RHINE
+	---help---
+	  This instructs the driver to use PCI shared memory (MMIO) instead of
+	  programmed I/O ports (PIO). Enabling this gives an improvement in
+	  processing time in parts of the driver.
+
+	  If unsure, say Y.
+
+config VIA_VELOCITY
+	tristate "VIA Velocity support"
+	depends on PCI
+	select CRC32
+	select CRC_CCITT
+	select MII
+	---help---
+	  If you have a VIA "Velocity" based network card say Y here.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called via-velocity.
+
+endif # NET_VENDOR_VIA
diff --git a/drivers/net/ethernet/via/Makefile b/drivers/net/ethernet/via/Makefile
new file mode 100644
index 00000000000..46c5d4a3d8f
--- /dev/null
+++ b/drivers/net/ethernet/via/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the VIA device drivers.
+#
+
+obj-$(CONFIG_VIA_RHINE) += via-rhine.o
+obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
diff --git a/drivers/net/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
index 7f23ab913fd..7f23ab913fd 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/ethernet/via/via-rhine.c
diff --git a/drivers/net/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
index 490ec5b2775..490ec5b2775 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/ethernet/via/via-velocity.c
diff --git a/drivers/net/via-velocity.h b/drivers/net/ethernet/via/via-velocity.h
index 4cb9f13485e..4cb9f13485e 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/ethernet/via/via-velocity.h