summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorKrzysztof Helt <krzysztof.h1@wp.pl>2008-10-15 22:03:42 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-10-16 11:21:44 -0700
commit486ff387c0f27030a3cfb142469ba140f2d8976e (patch)
tree0a351c71ab3fb1b0793334a9c043f8c8760ec37a /drivers
parent3b921832d483a2b9d6fabdbb5f871a4f18cb9b65 (diff)
cirrusfb: do not change MCLK for Alpine chips
A memory clock value (MCLK) is changed to a minimum required by a current mode bandwidth. This usually lowers the MCLK to its minimum (50 MHz) thus decreasing the card performance. Just leave the MCLK value set by card BIOS. The CL-GD5446 Technical Reference Manual point 9.9.1.3 states that if a pixclock value is close (~1%) to the MCLK or MCLK/2 this may result in a jitter on the screen. A countermeasure is to use the MCLK as pixclock source instead of a VCLK. The patch implements this as well. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/video/cirrusfb.c119
1 files changed, 53 insertions, 66 deletions
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 9e0a1c58fde..048b139f0e5 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -327,9 +327,7 @@ static const struct {
#endif /* CONFIG_ZORRO */
struct cirrusfb_regs {
- long multiplexing;
- long mclk;
- long divMCLK;
+ int multiplexing;
};
#ifdef CIRRUSFB_DEBUG
@@ -461,45 +459,28 @@ static int cirrusfb_release(struct fb_info *info, int user)
/****************************************************************************/
/**** BEGIN Hardware specific Routines **************************************/
-/* Get a good MCLK value */
-static long cirrusfb_get_mclk(long freq, int bpp, long *div)
+/* Check if the MCLK is not a better clock source */
+static int cirrusfb_check_mclk(struct cirrusfb_info *cinfo, long freq)
{
- long mclk;
+ long mclk = vga_rseq(cinfo->regbase, CL_SEQR1F) & 0x3f;
- assert(div != NULL);
-
- /* Calculate MCLK, in case VCLK is high enough to require > 50MHz.
- * Assume a 64-bit data path for now. The formula is:
- * ((B * PCLK * 2)/W) * 1.2
- * B = bytes per pixel, PCLK = pixclock, W = data width in bytes */
- mclk = ((bpp / 8) * freq * 2) / 4;
- mclk = (mclk * 12) / 10;
- if (mclk < 50000)
- mclk = 50000;
- DPRINTK("Use MCLK of %ld kHz\n", mclk);
-
- /* Calculate value for SR1F. Multiply by 2 so we can round up. */
- mclk = ((mclk * 16) / 14318);
- mclk = (mclk + 1) / 2;
- DPRINTK("Set SR1F[5:0] to 0x%lx\n", mclk);
+ /* Read MCLK value */
+ mclk = (14318 * mclk) >> 3;
+ DPRINTK("Read MCLK of %ld kHz\n", mclk);
/* Determine if we should use MCLK instead of VCLK, and if so, what we
- * should divide it by to get VCLK */
- switch (freq) {
- case 24751 ... 25249:
- *div = 2;
- DPRINTK("Using VCLK = MCLK/2\n");
- break;
- case 49501 ... 50499:
- *div = 1;
+ * should divide it by to get VCLK
+ */
+
+ if (abs(freq - mclk) < 250) {
DPRINTK("Using VCLK = MCLK\n");
- break;
- default:
- *div = 0;
- break;
+ return 1;
+ } else if (abs(freq - (mclk / 2)) < 250) {
+ DPRINTK("Using VCLK = MCLK/2\n");
+ return 2;
}
- return mclk;
+ return 0;
}
static int cirrusfb_check_var(struct fb_var_screeninfo *var,
@@ -705,30 +686,27 @@ static int cirrusfb_decode_var(const struct fb_var_screeninfo *var,
break;
}
#endif
- regs->mclk = cirrusfb_get_mclk(freq, var->bits_per_pixel,
- &regs->divMCLK);
-
return 0;
}
-static void cirrusfb_set_mclk(const struct cirrusfb_info *cinfo, int val,
- int div)
+static void cirrusfb_set_mclk_as_source(const struct cirrusfb_info *cinfo,
+ int div)
{
+ unsigned char old1f, old1e;
assert(cinfo != NULL);
+ old1f = vga_rseq(cinfo->regbase, CL_SEQR1F) & ~0x40;
- if (div == 2) {
- /* VCLK = MCLK/2 */
- unsigned char old = vga_rseq(cinfo->regbase, CL_SEQR1E);
- vga_wseq(cinfo->regbase, CL_SEQR1E, old | 0x1);
- vga_wseq(cinfo->regbase, CL_SEQR1F, 0x40 | (val & 0x3f));
- } else if (div == 1) {
- /* VCLK = MCLK */
- unsigned char old = vga_rseq(cinfo->regbase, CL_SEQR1E);
- vga_wseq(cinfo->regbase, CL_SEQR1E, old & ~0x1);
- vga_wseq(cinfo->regbase, CL_SEQR1F, 0x40 | (val & 0x3f));
- } else {
- vga_wseq(cinfo->regbase, CL_SEQR1F, val & 0x3f);
+ if (div) {
+ DPRINTK("Set %s as pixclock source.\n",
+ (div == 2) ? "MCLK/2" : "MCLK");
+ old1f |= 0x40;
+ old1e = vga_rseq(cinfo->regbase, CL_SEQR1E) & ~0x1;
+ if (div == 2)
+ old1e |= 1;
+
+ vga_wseq(cinfo->regbase, CL_SEQR1E, old1e);
}
+ vga_wseq(cinfo->regbase, CL_SEQR1F, old1f);
}
/*************************************************************************
@@ -904,19 +882,31 @@ static int cirrusfb_set_par_foo(struct fb_info *info)
/* formula: VClk = (OSC * N) / (D * (1+P)) */
/* Example: VClk = (14.31818 * 91) / (23 * (1+1)) = 28.325 MHz */
- vga_wseq(regbase, CL_SEQRB, nom);
- tmp = den << 1;
- if (div != 0)
- tmp |= 1;
+ if (cinfo->btype == BT_ALPINE) {
+ /* if freq is close to mclk or mclk/2 select mclk
+ * as clock source
+ */
+ int divMCLK = cirrusfb_check_mclk(cinfo, freq);
+ if (divMCLK) {
+ nom = 0;
+ cirrusfb_set_mclk_as_source(cinfo, divMCLK);
+ }
+ }
+ if (nom) {
+ vga_wseq(regbase, CL_SEQRB, nom);
+ tmp = den << 1;
+ if (div != 0)
+ tmp |= 1;
- /* 6 bit denom; ONLY 5434!!! (bugged me 10 days) */
- if ((cinfo->btype == BT_SD64) ||
- (cinfo->btype == BT_ALPINE) ||
- (cinfo->btype == BT_GD5480))
- tmp |= 0x80;
+ /* 6 bit denom; ONLY 5434!!! (bugged me 10 days) */
+ if ((cinfo->btype == BT_SD64) ||
+ (cinfo->btype == BT_ALPINE) ||
+ (cinfo->btype == BT_GD5480))
+ tmp |= 0x80;
- DPRINTK("CL_SEQR1B: %ld\n", (long) tmp);
- vga_wseq(regbase, CL_SEQR1B, tmp);
+ DPRINTK("CL_SEQR1B: %ld\n", (long) tmp);
+ vga_wseq(regbase, CL_SEQR1B, tmp);
+ }
if (yres >= 1024)
/* 1280x1024 */
@@ -1106,7 +1096,6 @@ static int cirrusfb_set_par_foo(struct fb_info *info)
case BT_ALPINE:
DPRINTK(" (for GD543x)\n");
- cirrusfb_set_mclk(cinfo, regs.mclk, regs.divMCLK);
/* We already set SRF and SR1F */
break;
@@ -1179,7 +1168,6 @@ static int cirrusfb_set_par_foo(struct fb_info *info)
case BT_ALPINE:
DPRINTK(" (for GD543x)\n");
vga_wseq(regbase, CL_SEQR7, 0xa7);
- cirrusfb_set_mclk(cinfo, regs.mclk, regs.divMCLK);
break;
case BT_GD5480:
@@ -1257,7 +1245,6 @@ static int cirrusfb_set_par_foo(struct fb_info *info)
case BT_ALPINE:
DPRINTK(" (for GD543x)\n");
vga_wseq(regbase, CL_SEQR7, 0xa9);
- cirrusfb_set_mclk(cinfo, regs.mclk, regs.divMCLK);
break;
case BT_GD5480: